drivers/pinctrl/samsung/pinctrl-exynos.h

   1 /* SPDX-License-Identifier: GPL-2.0+ */
   2 /*
   3  * Exynos specific definitions for Samsung pinctrl and gpiolib driver.
   4  *
   5  * Copyright (c) 2012 Samsung Electronics Co., Ltd.
   6  *              http://www.samsung.com
   7  * Copyright (c) 2012 Linaro Ltd
   8  *              http://www.linaro.org
   9  *
  10  * This file contains the Exynos specific definitions for the Samsung
  11  * pinctrl/gpiolib interface drivers.
  12  *
  13  * Author: Thomas Abraham <thomas.ab@samsung.com>
  14  */
  15
  16 #ifndef __PINCTRL_SAMSUNG_EXYNOS_H
  17 #define __PINCTRL_SAMSUNG_EXYNOS_H
  18
  19 /* External GPIO and wakeup interrupt related definitions */
  20 #define EXYNOS_GPIO_ECON_OFFSET         0x700
  21 #define EXYNOS_GPIO_EFLTCON_OFFSET      0x800
  22 #define EXYNOS_GPIO_EMASK_OFFSET        0x900
  23 #define EXYNOS_GPIO_EPEND_OFFSET        0xA00
  24 #define EXYNOS_WKUP_ECON_OFFSET         0xE00
  25 #define EXYNOS_WKUP_EMASK_OFFSET        0xF00
  26 #define EXYNOS_WKUP_EPEND_OFFSET        0xF40
  27 #define EXYNOS7_WKUP_ECON_OFFSET        0x700
  28 #define EXYNOS7_WKUP_EMASK_OFFSET       0x900
  29 #define EXYNOS7_WKUP_EPEND_OFFSET       0xA00
  30 #define EXYNOS_SVC_OFFSET               0xB08
  31
  32 /* helpers to access interrupt service register */
  33 #define EXYNOS_SVC_GROUP_SHIFT          3
  34 #define EXYNOS_SVC_GROUP_MASK           0x1f
  35 #define EXYNOS_SVC_NUM_MASK             7
  36 #define EXYNOS_SVC_GROUP(x)             ((x >> EXYNOS_SVC_GROUP_SHIFT) & \
  37                                                 EXYNOS_SVC_GROUP_MASK)
  38
  39 /* Exynos specific external interrupt trigger types */
  40 #define EXYNOS_EINT_LEVEL_LOW           0
  41 #define EXYNOS_EINT_LEVEL_HIGH          1
  42 #define EXYNOS_EINT_EDGE_FALLING        2
  43 #define EXYNOS_EINT_EDGE_RISING         3
  44 #define EXYNOS_EINT_EDGE_BOTH           4
  45 #define EXYNOS_EINT_CON_MASK            0xF
  46 #define EXYNOS_EINT_CON_LEN             4
  47
  48 #define EXYNOS_EINT_MAX_PER_BANK        8
  49 #define EXYNOS_EINT_NR_WKUP_EINT
  50
  51 #define EXYNOS_PIN_BANK_EINTN(pins, reg, id)            \
  52         {                                               \
  53                 .type           = &bank_type_off,       \
  54                 .pctl_offset    = reg,                  \
  55                 .nr_pins        = pins,                 \
  56                 .eint_type      = EINT_TYPE_NONE,       \
  57                 .name           = id                    \
  58         }
  59
  60 #define EXYNOS_PIN_BANK_EINTG(pins, reg, id, offs)      \
  61         {                                               \
  62                 .type           = &bank_type_off,       \
  63                 .pctl_offset    = reg,                  \
  64                 .nr_pins        = pins,                 \
  65                 .eint_type      = EINT_TYPE_GPIO,       \
  66                 .eint_offset    = offs,                 \
  67                 .name           = id                    \
  68         }
  69
  70 #define EXYNOS_PIN_BANK_EINTW(pins, reg, id, offs)      \
  71         {                                               \
  72                 .type           = &bank_type_alive,     \
  73                 .pctl_offset    = reg,                  \
  74                 .nr_pins        = pins,                 \
  75                 .eint_type      = EINT_TYPE_WKUP,       \
  76                 .eint_offset    = offs,                 \
  77                 .name           = id                    \
  78         }
  79
  80 #define EXYNOS5433_PIN_BANK_EINTG(pins, reg, id, offs)          \
  81         {                                                       \
  82                 .type           = &exynos5433_bank_type_off,    \
  83                 .pctl_offset    = reg,                          \
  84                 .nr_pins        = pins,                         \
  85                 .eint_type      = EINT_TYPE_GPIO,               \
  86                 .eint_offset    = offs,                         \
  87                 .name           = id                            \
  88         }
  89
  90 #define EXYNOS5433_PIN_BANK_EINTW(pins, reg, id, offs)          \
  91         {                                                       \
  92                 .type           = &exynos5433_bank_type_alive,  \
  93                 .pctl_offset    = reg,                          \
  94                 .nr_pins        = pins,                         \
  95                 .eint_type      = EINT_TYPE_WKUP,               \
  96                 .eint_offset    = offs,                         \
  97                 .name           = id                            \
  98         }
  99
 100 #define EXYNOS5433_PIN_BANK_EINTW_EXT(pins, reg, id, offs, pctl_idx) \
 101         {                                                       \
 102                 .type           = &exynos5433_bank_type_off,    \
 103                 .pctl_offset    = reg,                          \
 104                 .nr_pins        = pins,                         \
 105                 .eint_type      = EINT_TYPE_WKUP,               \
 106                 .eint_offset    = offs,                         \
 107                 .name           = id,                           \
 108                 .pctl_res_idx   = pctl_idx,                     \
 109         }                                                       \
 110
 111 #define EXYNOS850_PIN_BANK_EINTN(pins, reg, id)                 \
 112         {                                                       \
 113                 .type           = &exynos850_bank_type_alive,   \
 114                 .pctl_offset    = reg,                          \
 115                 .nr_pins        = pins,                         \
 116                 .eint_type      = EINT_TYPE_NONE,               \
 117                 .name           = id                            \
 118         }
 119
 120 #define EXYNOS850_PIN_BANK_EINTG(pins, reg, id, offs)           \
 121         {                                                       \
 122                 .type           = &exynos850_bank_type_off,     \
 123                 .pctl_offset    = reg,                          \
 124                 .nr_pins        = pins,                         \
 125                 .eint_type      = EINT_TYPE_GPIO,               \
 126                 .eint_offset    = offs,                         \
 127                 .name           = id                            \
 128         }
 129
 130 #define EXYNOS850_PIN_BANK_EINTW(pins, reg, id, offs)           \
 131         {                                                       \
 132                 .type           = &exynos850_bank_type_alive,   \
 133                 .pctl_offset    = reg,                          \
 134                 .nr_pins        = pins,                         \
 135                 .eint_type      = EINT_TYPE_WKUP,               \
 136                 .eint_offset    = offs,                         \
 137                 .name           = id                            \
 138         }
 139
 140 /**
 141  * struct exynos_weint_data: irq specific data for all the wakeup interrupts
 142  * generated by the external wakeup interrupt controller.
 143  * @irq: interrupt number within the domain.
 144  * @bank: bank responsible for this interrupt
 145  */
 146 struct exynos_weint_data {
 147         unsigned int irq;
 148         struct samsung_pin_bank *bank;
 149 };
 150
 151 /**
 152  * struct exynos_muxed_weint_data: irq specific data for muxed wakeup interrupts
 153  * generated by the external wakeup interrupt controller.
 154  * @nr_banks: count of banks being part of the mux
 155  * @banks: array of banks being part of the mux
 156  */
 157 struct exynos_muxed_weint_data {
 158         unsigned int nr_banks;
 159         struct samsung_pin_bank *banks[];
 160 };
 161
 162 int exynos_eint_gpio_init(struct samsung_pinctrl_drv_data *d);
 163 int exynos_eint_wkup_init(struct samsung_pinctrl_drv_data *d);
 164 void exynos_pinctrl_suspend(struct samsung_pinctrl_drv_data *drvdata);
 165 void exynos_pinctrl_resume(struct samsung_pinctrl_drv_data *drvdata);
 166 struct samsung_retention_ctrl *
 167 exynos_retention_init(struct samsung_pinctrl_drv_data *drvdata,
 168                       const struct samsung_retention_data *data);
 169
 170 #endif /* __PINCTRL_SAMSUNG_EXYNOS_H */