drivers/phy/qualcomm/phy-qcom-qmp-pcs-usb-v4.h

   1 /* SPDX-License-Identifier: GPL-2.0 */
   2 /*
   3  * Copyright (c) 2017, The Linux Foundation. All rights reserved.
   4  */
   5
   6 #ifndef QCOM_PHY_QMP_PCS_USB_V4_H_
   7 #define QCOM_PHY_QMP_PCS_USB_V4_H_
   8
   9 /* Only for QMP V4 PHY - USB3 PCS registers */
  10 #define QPHY_V4_PCS_USB3_POWER_STATE_CONFIG1            0x000
  11 #define QPHY_V4_PCS_USB3_AUTONOMOUS_MODE_STATUS         0x004
  12 #define QPHY_V4_PCS_USB3_AUTONOMOUS_MODE_CTRL           0x008
  13 #define QPHY_V4_PCS_USB3_AUTONOMOUS_MODE_CTRL2          0x00c
  14 #define QPHY_V4_PCS_USB3_LFPS_RXTERM_IRQ_SOURCE_STATUS  0x010
  15 #define QPHY_V4_PCS_USB3_LFPS_RXTERM_IRQ_CLEAR          0x014
  16 #define QPHY_V4_PCS_USB3_LFPS_DET_HIGH_COUNT_VAL        0x018
  17 #define QPHY_V4_PCS_USB3_LFPS_TX_ECSTART                0x01c
  18 #define QPHY_V4_PCS_USB3_LFPS_PER_TIMER_VAL             0x020
  19 #define QPHY_V4_PCS_USB3_LFPS_TX_END_CNT_U3_START       0x024
  20 #define QPHY_V4_PCS_USB3_RXEQTRAINING_LOCK_TIME         0x028
  21 #define QPHY_V4_PCS_USB3_RXEQTRAINING_WAIT_TIME         0x02c
  22 #define QPHY_V4_PCS_USB3_RXEQTRAINING_CTLE_TIME         0x030
  23 #define QPHY_V4_PCS_USB3_RXEQTRAINING_WAIT_TIME_S2      0x034
  24 #define QPHY_V4_PCS_USB3_RXEQTRAINING_DFE_TIME_S2       0x038
  25 #define QPHY_V4_PCS_USB3_RCVR_DTCT_DLY_U3_L             0x03c
  26 #define QPHY_V4_PCS_USB3_RCVR_DTCT_DLY_U3_H             0x040
  27 #define QPHY_V4_PCS_USB3_ARCVR_DTCT_EN_PERIOD           0x044
  28 #define QPHY_V4_PCS_USB3_ARCVR_DTCT_CM_DLY              0x048
  29 #define QPHY_V4_PCS_USB3_TXONESZEROS_RUN_LENGTH         0x04c
  30 #define QPHY_V4_PCS_USB3_ALFPS_DEGLITCH_VAL             0x050
  31 #define QPHY_V4_PCS_USB3_SIGDET_STARTUP_TIMER_VAL       0x054
  32 #define QPHY_V4_PCS_USB3_TEST_CONTROL                   0x058
  33
  34 #endif