drivers/phy/hisilicon/phy-hi3660-usb3.c

   1 // SPDX-License-Identifier: GPL-2.0
   2 /*
   3  * Phy provider for USB 3.0 controller on HiSilicon 3660 platform
   4  *
   5  * Copyright (C) 2017-2018 Hilisicon Electronics Co., Ltd.
   6  *              http://www.huawei.com
   7  *
   8  * Authors: Yu Chen <chenyu56@huawei.com>
   9  */
  10
  11 #include <linux/kernel.h>
  12 #include <linux/mfd/syscon.h>
  13 #include <linux/module.h>
  14 #include <linux/phy/phy.h>
  15 #include <linux/platform_device.h>
  16 #include <linux/regmap.h>
  17
  18 #define PERI_CRG_CLK_EN4                        0x40
  19 #define PERI_CRG_CLK_DIS4                       0x44
  20 #define GT_CLK_USB3OTG_REF                      BIT(0)
  21 #define GT_ACLK_USB3OTG                         BIT(1)
  22
  23 #define PERI_CRG_RSTEN4                         0x90
  24 #define PERI_CRG_RSTDIS4                        0x94
  25 #define IP_RST_USB3OTGPHY_POR                   BIT(3)
  26 #define IP_RST_USB3OTG                          BIT(5)
  27
  28 #define PERI_CRG_ISODIS                         0x148
  29 #define USB_REFCLK_ISO_EN                       BIT(25)
  30
  31 #define PCTRL_PERI_CTRL3                        0x10
  32 #define PCTRL_PERI_CTRL3_MSK_START              16
  33 #define USB_TCXO_EN                             BIT(1)
  34
  35 #define PCTRL_PERI_CTRL24                       0x64
  36 #define SC_CLK_USB3PHY_3MUX1_SEL                BIT(25)
  37
  38 #define USBOTG3_CTRL0                           0x00
  39 #define SC_USB3PHY_ABB_GT_EN                    BIT(15)
  40
  41 #define USBOTG3_CTRL2                           0x08
  42 #define USBOTG3CTRL2_POWERDOWN_HSP              BIT(0)
  43 #define USBOTG3CTRL2_POWERDOWN_SSP              BIT(1)
  44
  45 #define USBOTG3_CTRL3                           0x0C
  46 #define USBOTG3_CTRL3_VBUSVLDEXT                BIT(6)
  47 #define USBOTG3_CTRL3_VBUSVLDEXTSEL             BIT(5)
  48
  49 #define USBOTG3_CTRL4                           0x10
  50
  51 #define USBOTG3_CTRL7                           0x1c
  52 #define REF_SSP_EN                              BIT(16)
  53
  54 /* This value config the default txtune parameter of the usb 2.0 phy */
  55 #define HI3660_USB_DEFAULT_PHY_PARAM            0x1c466e3
  56
  57 struct hi3660_priv {
  58         struct device *dev;
  59         struct regmap *peri_crg;
  60         struct regmap *pctrl;
  61         struct regmap *otg_bc;
  62         u32 eye_diagram_param;
  63 };
  64
  65 static int hi3660_phy_init(struct phy *phy)
  66 {
  67         struct hi3660_priv *priv = phy_get_drvdata(phy);
  68         u32 val, mask;
  69         int ret;
  70
  71         /* usb refclk iso disable */
  72         ret = regmap_write(priv->peri_crg, PERI_CRG_ISODIS, USB_REFCLK_ISO_EN);
  73         if (ret)
  74                 goto out;
  75
  76         /* enable usb_tcxo_en */
  77         val = USB_TCXO_EN | (USB_TCXO_EN << PCTRL_PERI_CTRL3_MSK_START);
  78         ret = regmap_write(priv->pctrl, PCTRL_PERI_CTRL3, val);
  79         if (ret)
  80                 goto out;
  81
  82         /* assert phy */
  83         val = IP_RST_USB3OTGPHY_POR | IP_RST_USB3OTG;
  84         ret = regmap_write(priv->peri_crg, PERI_CRG_RSTEN4, val);
  85         if (ret)
  86                 goto out;
  87
  88         /* enable phy ref clk */
  89         val = SC_USB3PHY_ABB_GT_EN;
  90         mask = val;
  91         ret = regmap_update_bits(priv->otg_bc, USBOTG3_CTRL0, mask, val);
  92         if (ret)
  93                 goto out;
  94
  95         val = REF_SSP_EN;
  96         mask = val;
  97         ret = regmap_update_bits(priv->otg_bc, USBOTG3_CTRL7, mask, val);
  98         if (ret)
  99                 goto out;
 100
 101         /* exit from IDDQ mode */
 102         mask = USBOTG3CTRL2_POWERDOWN_HSP | USBOTG3CTRL2_POWERDOWN_SSP;
 103         ret = regmap_update_bits(priv->otg_bc, USBOTG3_CTRL2, mask, 0);
 104         if (ret)
 105                 goto out;
 106
 107         /* delay for exit from IDDQ mode */
 108         usleep_range(100, 120);
 109
 110         /* deassert phy */
 111         val = IP_RST_USB3OTGPHY_POR | IP_RST_USB3OTG;
 112         ret = regmap_write(priv->peri_crg, PERI_CRG_RSTDIS4, val);
 113         if (ret)
 114                 goto out;
 115
 116         /* delay for phy deasserted */
 117         usleep_range(10000, 15000);
 118
 119         /* fake vbus valid signal */
 120         val = USBOTG3_CTRL3_VBUSVLDEXT | USBOTG3_CTRL3_VBUSVLDEXTSEL;
 121         mask = val;
 122         ret = regmap_update_bits(priv->otg_bc, USBOTG3_CTRL3, mask, val);
 123         if (ret)
 124                 goto out;
 125
 126         /* delay for vbus valid */
 127         usleep_range(100, 120);
 128
 129         ret = regmap_write(priv->otg_bc, USBOTG3_CTRL4,
 130                         priv->eye_diagram_param);
 131         if (ret)
 132                 goto out;
 133
 134         return 0;
 135 out:
 136         dev_err(priv->dev, "failed to init phy ret: %d\n", ret);
 137         return ret;
 138 }
 139
 140 static int hi3660_phy_exit(struct phy *phy)
 141 {
 142         struct hi3660_priv *priv = phy_get_drvdata(phy);
 143         u32 val;
 144         int ret;
 145
 146         /* assert phy */
 147         val = IP_RST_USB3OTGPHY_POR;
 148         ret = regmap_write(priv->peri_crg, PERI_CRG_RSTEN4, val);
 149         if (ret)
 150                 goto out;
 151
 152         /* disable usb_tcxo_en */
 153         val = USB_TCXO_EN << PCTRL_PERI_CTRL3_MSK_START;
 154         ret = regmap_write(priv->pctrl, PCTRL_PERI_CTRL3, val);
 155         if (ret)
 156                 goto out;
 157
 158         return 0;
 159 out:
 160         dev_err(priv->dev, "failed to exit phy ret: %d\n", ret);
 161         return ret;
 162 }
 163
 164 static const struct phy_ops hi3660_phy_ops = {
 165         .init           = hi3660_phy_init,
 166         .exit           = hi3660_phy_exit,
 167         .owner          = THIS_MODULE,
 168 };
 169
 170 static int hi3660_phy_probe(struct platform_device *pdev)
 171 {
 172         struct phy_provider *phy_provider;
 173         struct device *dev = &pdev->dev;
 174         struct phy *phy;
 175         struct hi3660_priv *priv;
 176
 177         priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
 178         if (!priv)
 179                 return -ENOMEM;
 180
 181         priv->dev = dev;
 182         priv->peri_crg = syscon_regmap_lookup_by_phandle(dev->of_node,
 183                                         "hisilicon,pericrg-syscon");
 184         if (IS_ERR(priv->peri_crg)) {
 185                 dev_err(dev, "no hisilicon,pericrg-syscon\n");
 186                 return PTR_ERR(priv->peri_crg);
 187         }
 188
 189         priv->pctrl = syscon_regmap_lookup_by_phandle(dev->of_node,
 190                                         "hisilicon,pctrl-syscon");
 191         if (IS_ERR(priv->pctrl)) {
 192                 dev_err(dev, "no hisilicon,pctrl-syscon\n");
 193                 return PTR_ERR(priv->pctrl);
 194         }
 195
 196         /* node of hi3660 phy is a sub-node of usb3_otg_bc */
 197         priv->otg_bc = syscon_node_to_regmap(dev->parent->of_node);
 198         if (IS_ERR(priv->otg_bc)) {
 199                 dev_err(dev, "no hisilicon,usb3-otg-bc-syscon\n");
 200                 return PTR_ERR(priv->otg_bc);
 201         }
 202
 203         if (of_property_read_u32(dev->of_node, "hisilicon,eye-diagram-param",
 204                 &(priv->eye_diagram_param)))
 205                 priv->eye_diagram_param = HI3660_USB_DEFAULT_PHY_PARAM;
 206
 207         phy = devm_phy_create(dev, NULL, &hi3660_phy_ops);
 208         if (IS_ERR(phy))
 209                 return PTR_ERR(phy);
 210
 211         phy_set_drvdata(phy, priv);
 212         phy_provider = devm_of_phy_provider_register(dev, of_phy_simple_xlate);
 213         return PTR_ERR_OR_ZERO(phy_provider);
 214 }
 215
 216 static const struct of_device_id hi3660_phy_of_match[] = {
 217         {.compatible = "hisilicon,hi3660-usb-phy",},
 218         { }
 219 };
 220 MODULE_DEVICE_TABLE(of, hi3660_phy_of_match);
 221
 222 static struct platform_driver hi3660_phy_driver = {
 223         .probe  = hi3660_phy_probe,
 224         .driver = {
 225                 .name   = "hi3660-usb-phy",
 226                 .of_match_table = hi3660_phy_of_match,
 227         }
 228 };
 229 module_platform_driver(hi3660_phy_driver);
 230
 231 MODULE_AUTHOR("Yu Chen <chenyu56@huawei.com>");
 232 MODULE_LICENSE("GPL v2");
 233 MODULE_DESCRIPTION("Hilisicon Hi3660 USB3 PHY Driver");