drivers/phy/broadcom/phy-brcm-usb-init-synopsys.c

   1 // SPDX-License-Identifier: GPL-2.0
   2 /* Copyright (c) 2018, Broadcom */
   3
   4 /*
   5  * This module contains USB PHY initialization for power up and S3 resume
   6  * for newer Synopsys based USB hardware first used on the bcm7216.
   7  */
   8
   9 #include <linux/delay.h>
  10 #include <linux/io.h>
  11
  12 #include <linux/soc/brcmstb/brcmstb.h>
  13 #include "phy-brcm-usb-init.h"
  14
  15 #define PHY_LOCK_TIMEOUT_MS 200
  16
  17 /* Register definitions for syscon piarbctl registers */
  18 #define PIARBCTL_CAM                    0x00
  19 #define PIARBCTL_SPLITTER               0x04
  20 #define PIARBCTL_MISC                   0x08
  21 #define   PIARBCTL_MISC_SECURE_MASK                     0x80000000
  22 #define   PIARBCTL_MISC_USB_SELECT_MASK                 0x40000000
  23 #define   PIARBCTL_MISC_USB_4G_SDRAM_MASK               0x20000000
  24 #define   PIARBCTL_MISC_USB_PRIORITY_MASK               0x000f0000
  25 #define   PIARBCTL_MISC_USB_MEM_PAGE_MASK               0x0000f000
  26 #define   PIARBCTL_MISC_CAM1_MEM_PAGE_MASK              0x00000f00
  27 #define   PIARBCTL_MISC_CAM0_MEM_PAGE_MASK              0x000000f0
  28 #define   PIARBCTL_MISC_SATA_PRIORITY_MASK              0x0000000f
  29
  30 #define PIARBCTL_MISC_USB_ONLY_MASK             \
  31         (PIARBCTL_MISC_USB_SELECT_MASK |        \
  32          PIARBCTL_MISC_USB_4G_SDRAM_MASK |      \
  33          PIARBCTL_MISC_USB_PRIORITY_MASK |      \
  34          PIARBCTL_MISC_USB_MEM_PAGE_MASK)
  35
  36 /* Register definitions for the USB CTRL block */
  37 #define USB_CTRL_SETUP                  0x00
  38 #define   USB_CTRL_SETUP_STRAP_IPP_SEL_MASK             0x02000000
  39 #define   USB_CTRL_SETUP_SCB2_EN_MASK                   0x00008000
  40 #define   USB_CTRL_SETUP_tca_drv_sel_MASK               0x01000000
  41 #define   USB_CTRL_SETUP_SCB1_EN_MASK                   0x00004000
  42 #define   USB_CTRL_SETUP_SOFT_SHUTDOWN_MASK             0x00000200
  43 #define   USB_CTRL_SETUP_IPP_MASK                       0x00000020
  44 #define   USB_CTRL_SETUP_IOC_MASK                       0x00000010
  45 #define USB_CTRL_USB_PM                 0x04
  46 #define   USB_CTRL_USB_PM_USB_PWRDN_MASK                0x80000000
  47 #define   USB_CTRL_USB_PM_SOFT_RESET_MASK               0x40000000
  48 #define   USB_CTRL_USB_PM_BDC_SOFT_RESETB_MASK          0x00800000
  49 #define   USB_CTRL_USB_PM_XHC_SOFT_RESETB_MASK          0x00400000
  50 #define USB_CTRL_USB_PM_STATUS          0x08
  51 #define USB_CTRL_USB_DEVICE_CTL1        0x10
  52 #define   USB_CTRL_USB_DEVICE_CTL1_PORT_MODE_MASK       0x00000003
  53 #define USB_CTRL_TEST_PORT_CTL          0x30
  54 #define   USB_CTRL_TEST_PORT_CTL_TPOUT_SEL_MASK 0x000000ff
  55 #define   USB_CTRL_TEST_PORT_CTL_TPOUT_SEL_PME_GEN_MASK 0x0000002e
  56 #define USB_CTRL_TP_DIAG1               0x34
  57 #define   USB_CTLR_TP_DIAG1_wake_MASK   0x00000002
  58 #define USB_CTRL_CTLR_CSHCR             0x50
  59 #define   USB_CTRL_CTLR_CSHCR_ctl_pme_en_MASK   0x00040000
  60
  61 /* Register definitions for the USB_PHY block in 7211b0 */
  62 #define USB_PHY_PLL_CTL                 0x00
  63 #define   USB_PHY_PLL_CTL_PLL_RESETB_MASK               0x40000000
  64 #define USB_PHY_PLL_LDO_CTL             0x08
  65 #define   USB_PHY_PLL_LDO_CTL_AFE_CORERDY_MASK          0x00000004
  66 #define   USB_PHY_PLL_LDO_CTL_AFE_LDO_PWRDWNB_MASK      0x00000002
  67 #define   USB_PHY_PLL_LDO_CTL_AFE_BG_PWRDWNB_MASK       0x00000001
  68 #define USB_PHY_UTMI_CTL_1              0x04
  69 #define   USB_PHY_UTMI_CTL_1_POWER_UP_FSM_EN_MASK       0x00000800
  70 #define   USB_PHY_UTMI_CTL_1_PHY_MODE_MASK              0x0000000c
  71 #define   USB_PHY_UTMI_CTL_1_PHY_MODE_SHIFT             2
  72 #define USB_PHY_IDDQ                    0x1c
  73 #define   USB_PHY_IDDQ_phy_iddq_MASK                    0x00000001
  74 #define USB_PHY_STATUS                  0x20
  75 #define   USB_PHY_STATUS_pll_lock_MASK                  0x00000001
  76
  77 /* Register definitions for the MDIO registers in the DWC2 block of
  78  * the 7211b0.
  79  * NOTE: The PHY's MDIO registers are only accessible through the
  80  * legacy DesignWare USB controller even though it's not being used.
  81  */
  82 #define USB_GMDIOCSR    0
  83 #define USB_GMDIOGEN    4
  84
  85 /* Register definitions for the BDC EC block in 7211b0 */
  86 #define BDC_EC_AXIRDA                   0x0c
  87 #define   BDC_EC_AXIRDA_RTS_MASK                        0xf0000000
  88 #define   BDC_EC_AXIRDA_RTS_SHIFT                       28
  89
  90
  91 static void usb_mdio_write_7211b0(struct brcm_usb_init_params *params,
  92                                   uint8_t addr, uint16_t data)
  93 {
  94         void __iomem *usb_mdio = params->regs[BRCM_REGS_USB_MDIO];
  95
  96         addr &= 0x1f; /* 5-bit address */
  97         brcm_usb_writel(0xffffffff, usb_mdio + USB_GMDIOGEN);
  98         while (brcm_usb_readl(usb_mdio + USB_GMDIOCSR) & (1<<31))
  99                 ;
 100         brcm_usb_writel(0x59020000 | (addr << 18) | data,
 101                         usb_mdio + USB_GMDIOGEN);
 102         while (brcm_usb_readl(usb_mdio + USB_GMDIOCSR) & (1<<31))
 103                 ;
 104         brcm_usb_writel(0x00000000, usb_mdio + USB_GMDIOGEN);
 105         while (brcm_usb_readl(usb_mdio + USB_GMDIOCSR) & (1<<31))
 106                 ;
 107 }
 108
 109 static uint16_t __maybe_unused usb_mdio_read_7211b0(
 110         struct brcm_usb_init_params *params, uint8_t addr)
 111 {
 112         void __iomem *usb_mdio = params->regs[BRCM_REGS_USB_MDIO];
 113
 114         addr &= 0x1f; /* 5-bit address */
 115         brcm_usb_writel(0xffffffff, usb_mdio + USB_GMDIOGEN);
 116         while (brcm_usb_readl(usb_mdio + USB_GMDIOCSR) & (1<<31))
 117                 ;
 118         brcm_usb_writel(0x69020000 | (addr << 18), usb_mdio + USB_GMDIOGEN);
 119         while (brcm_usb_readl(usb_mdio + USB_GMDIOCSR) & (1<<31))
 120                 ;
 121         brcm_usb_writel(0x00000000, usb_mdio + USB_GMDIOGEN);
 122         while (brcm_usb_readl(usb_mdio + USB_GMDIOCSR) & (1<<31))
 123                 ;
 124         return brcm_usb_readl(usb_mdio + USB_GMDIOCSR) & 0xffff;
 125 }
 126
 127 static void usb2_eye_fix_7211b0(struct brcm_usb_init_params *params)
 128 {
 129         /* select bank */
 130         usb_mdio_write_7211b0(params, 0x1f, 0x80a0);
 131
 132         /* Set the eye */
 133         usb_mdio_write_7211b0(params, 0x0a, 0xc6a0);
 134 }
 135
 136 static void xhci_soft_reset(struct brcm_usb_init_params *params,
 137                         int on_off)
 138 {
 139         void __iomem *ctrl = params->regs[BRCM_REGS_CTRL];
 140
 141         /* Assert reset */
 142         if (on_off)
 143                 USB_CTRL_UNSET(ctrl, USB_PM, XHC_SOFT_RESETB);
 144         /* De-assert reset */
 145         else
 146                 USB_CTRL_SET(ctrl, USB_PM, XHC_SOFT_RESETB);
 147 }
 148
 149 static void usb_init_ipp(struct brcm_usb_init_params *params)
 150 {
 151         void __iomem *ctrl = params->regs[BRCM_REGS_CTRL];
 152         u32 reg;
 153         u32 orig_reg;
 154
 155         pr_debug("%s\n", __func__);
 156
 157         orig_reg = reg = brcm_usb_readl(USB_CTRL_REG(ctrl, SETUP));
 158         if (params->ipp != 2)
 159                 /* override ipp strap pin (if it exits) */
 160                 reg &= ~(USB_CTRL_MASK(SETUP, STRAP_IPP_SEL));
 161
 162         /* Override the default OC and PP polarity */
 163         reg &= ~(USB_CTRL_MASK(SETUP, IPP) | USB_CTRL_MASK(SETUP, IOC));
 164         if (params->ioc)
 165                 reg |= USB_CTRL_MASK(SETUP, IOC);
 166         if (params->ipp == 1)
 167                 reg |= USB_CTRL_MASK(SETUP, IPP);
 168         brcm_usb_writel(reg, USB_CTRL_REG(ctrl, SETUP));
 169
 170         /*
 171          * If we're changing IPP, make sure power is off long enough
 172          * to turn off any connected devices.
 173          */
 174         if ((reg ^ orig_reg) & USB_CTRL_MASK(SETUP, IPP))
 175                 msleep(50);
 176 }
 177
 178 static void syscon_piarbctl_init(struct regmap *rmap)
 179 {
 180         /* Switch from legacy USB OTG controller to new STB USB controller */
 181         regmap_update_bits(rmap, PIARBCTL_MISC, PIARBCTL_MISC_USB_ONLY_MASK,
 182                            PIARBCTL_MISC_USB_SELECT_MASK |
 183                            PIARBCTL_MISC_USB_4G_SDRAM_MASK);
 184 }
 185
 186 static void usb_init_common(struct brcm_usb_init_params *params)
 187 {
 188         u32 reg;
 189         void __iomem *ctrl = params->regs[BRCM_REGS_CTRL];
 190
 191         pr_debug("%s\n", __func__);
 192
 193         USB_CTRL_UNSET(ctrl, USB_PM, USB_PWRDN);
 194         /* 1 millisecond - for USB clocks to settle down */
 195         usleep_range(1000, 2000);
 196
 197         if (USB_CTRL_MASK(USB_DEVICE_CTL1, PORT_MODE)) {
 198                 reg = brcm_usb_readl(USB_CTRL_REG(ctrl, USB_DEVICE_CTL1));
 199                 reg &= ~USB_CTRL_MASK(USB_DEVICE_CTL1, PORT_MODE);
 200                 reg |= params->mode;
 201                 brcm_usb_writel(reg, USB_CTRL_REG(ctrl, USB_DEVICE_CTL1));
 202         }
 203         switch (params->mode) {
 204         case USB_CTLR_MODE_HOST:
 205                 USB_CTRL_UNSET(ctrl, USB_PM, BDC_SOFT_RESETB);
 206                 break;
 207         default:
 208                 USB_CTRL_UNSET(ctrl, USB_PM, BDC_SOFT_RESETB);
 209                 USB_CTRL_SET(ctrl, USB_PM, BDC_SOFT_RESETB);
 210                 break;
 211         }
 212 }
 213
 214 static void usb_wake_enable_7211b0(struct brcm_usb_init_params *params,
 215                                    bool enable)
 216 {
 217         void __iomem *ctrl = params->regs[BRCM_REGS_CTRL];
 218
 219         if (enable)
 220                 USB_CTRL_SET(ctrl, CTLR_CSHCR, ctl_pme_en);
 221         else
 222                 USB_CTRL_UNSET(ctrl, CTLR_CSHCR, ctl_pme_en);
 223 }
 224
 225 static void usb_init_common_7211b0(struct brcm_usb_init_params *params)
 226 {
 227         void __iomem *ctrl = params->regs[BRCM_REGS_CTRL];
 228         void __iomem *usb_phy = params->regs[BRCM_REGS_USB_PHY];
 229         void __iomem *bdc_ec = params->regs[BRCM_REGS_BDC_EC];
 230         int timeout_ms = PHY_LOCK_TIMEOUT_MS;
 231         u32 reg;
 232
 233         if (params->syscon_piarbctl)
 234                 syscon_piarbctl_init(params->syscon_piarbctl);
 235
 236         USB_CTRL_UNSET(ctrl, USB_PM, USB_PWRDN);
 237
 238         usb_wake_enable_7211b0(params, false);
 239         if (!params->wake_enabled) {
 240
 241                 /* undo possible suspend settings */
 242                 brcm_usb_writel(0, usb_phy + USB_PHY_IDDQ);
 243                 reg = brcm_usb_readl(usb_phy + USB_PHY_PLL_CTL);
 244                 reg |= USB_PHY_PLL_CTL_PLL_RESETB_MASK;
 245                 brcm_usb_writel(reg, usb_phy + USB_PHY_PLL_CTL);
 246
 247                 /* temporarily enable FSM so PHY comes up properly */
 248                 reg = brcm_usb_readl(usb_phy + USB_PHY_UTMI_CTL_1);
 249                 reg |= USB_PHY_UTMI_CTL_1_POWER_UP_FSM_EN_MASK;
 250                 brcm_usb_writel(reg, usb_phy + USB_PHY_UTMI_CTL_1);
 251         }
 252
 253         /* Init the PHY */
 254         reg = USB_PHY_PLL_LDO_CTL_AFE_CORERDY_MASK |
 255                 USB_PHY_PLL_LDO_CTL_AFE_LDO_PWRDWNB_MASK |
 256                 USB_PHY_PLL_LDO_CTL_AFE_BG_PWRDWNB_MASK;
 257         brcm_usb_writel(reg, usb_phy + USB_PHY_PLL_LDO_CTL);
 258
 259         /* wait for lock */
 260         while (timeout_ms-- > 0) {
 261                 reg = brcm_usb_readl(usb_phy + USB_PHY_STATUS);
 262                 if (reg & USB_PHY_STATUS_pll_lock_MASK)
 263                         break;
 264                 usleep_range(1000, 2000);
 265         }
 266
 267         /* Set the PHY_MODE */
 268         reg = brcm_usb_readl(usb_phy + USB_PHY_UTMI_CTL_1);
 269         reg &= ~USB_PHY_UTMI_CTL_1_PHY_MODE_MASK;
 270         reg |= params->mode << USB_PHY_UTMI_CTL_1_PHY_MODE_SHIFT;
 271         brcm_usb_writel(reg, usb_phy + USB_PHY_UTMI_CTL_1);
 272
 273         /* Fix the incorrect default */
 274         reg = brcm_usb_readl(ctrl + USB_CTRL_SETUP);
 275         reg &= ~USB_CTRL_SETUP_tca_drv_sel_MASK;
 276         brcm_usb_writel(reg, ctrl + USB_CTRL_SETUP);
 277
 278         usb_init_common(params);
 279
 280         /*
 281          * The BDC controller will get occasional failures with
 282          * the default "Read Transaction Size" of 6 (1024 bytes).
 283          * Set it to 4 (256 bytes).
 284          */
 285         if ((params->mode != USB_CTLR_MODE_HOST) && bdc_ec) {
 286                 reg = brcm_usb_readl(bdc_ec + BDC_EC_AXIRDA);
 287                 reg &= ~BDC_EC_AXIRDA_RTS_MASK;
 288                 reg |= (0x4 << BDC_EC_AXIRDA_RTS_SHIFT);
 289                 brcm_usb_writel(reg, bdc_ec + BDC_EC_AXIRDA);
 290         }
 291
 292         /*
 293          * Disable FSM, otherwise the PHY will auto suspend when no
 294          * device is connected and will be reset on resume.
 295          */
 296         reg = brcm_usb_readl(usb_phy + USB_PHY_UTMI_CTL_1);
 297         reg &= ~USB_PHY_UTMI_CTL_1_POWER_UP_FSM_EN_MASK;
 298         brcm_usb_writel(reg, usb_phy + USB_PHY_UTMI_CTL_1);
 299
 300         usb2_eye_fix_7211b0(params);
 301 }
 302
 303 static void usb_init_xhci(struct brcm_usb_init_params *params)
 304 {
 305         pr_debug("%s\n", __func__);
 306
 307         xhci_soft_reset(params, 0);
 308 }
 309
 310 static void usb_uninit_common(struct brcm_usb_init_params *params)
 311 {
 312         void __iomem *ctrl = params->regs[BRCM_REGS_CTRL];
 313
 314         pr_debug("%s\n", __func__);
 315
 316         USB_CTRL_SET(ctrl, USB_PM, USB_PWRDN);
 317
 318 }
 319
 320 static void usb_uninit_common_7211b0(struct brcm_usb_init_params *params)
 321 {
 322         void __iomem *ctrl = params->regs[BRCM_REGS_CTRL];
 323         void __iomem *usb_phy = params->regs[BRCM_REGS_USB_PHY];
 324         u32 reg;
 325
 326         pr_debug("%s\n", __func__);
 327
 328         if (params->wake_enabled) {
 329                 USB_CTRL_SET(ctrl, TEST_PORT_CTL, TPOUT_SEL_PME_GEN);
 330                 usb_wake_enable_7211b0(params, true);
 331         } else {
 332                 USB_CTRL_SET(ctrl, USB_PM, USB_PWRDN);
 333                 brcm_usb_writel(0, usb_phy + USB_PHY_PLL_LDO_CTL);
 334                 reg = brcm_usb_readl(usb_phy + USB_PHY_PLL_CTL);
 335                 reg &= ~USB_PHY_PLL_CTL_PLL_RESETB_MASK;
 336                 brcm_usb_writel(reg, usb_phy + USB_PHY_PLL_CTL);
 337                 brcm_usb_writel(USB_PHY_IDDQ_phy_iddq_MASK,
 338                                 usb_phy + USB_PHY_IDDQ);
 339         }
 340
 341 }
 342
 343 static void usb_uninit_xhci(struct brcm_usb_init_params *params)
 344 {
 345
 346         pr_debug("%s\n", __func__);
 347
 348         if (!params->wake_enabled)
 349                 xhci_soft_reset(params, 1);
 350 }
 351
 352 static int usb_get_dual_select(struct brcm_usb_init_params *params)
 353 {
 354         void __iomem *ctrl = params->regs[BRCM_REGS_CTRL];
 355         u32 reg = 0;
 356
 357         pr_debug("%s\n", __func__);
 358
 359         reg = brcm_usb_readl(USB_CTRL_REG(ctrl, USB_DEVICE_CTL1));
 360         reg &= USB_CTRL_MASK(USB_DEVICE_CTL1, PORT_MODE);
 361         return reg;
 362 }
 363
 364 static void usb_set_dual_select(struct brcm_usb_init_params *params, int mode)
 365 {
 366         void __iomem *ctrl = params->regs[BRCM_REGS_CTRL];
 367         u32 reg;
 368
 369         pr_debug("%s\n", __func__);
 370
 371         reg = brcm_usb_readl(USB_CTRL_REG(ctrl, USB_DEVICE_CTL1));
 372         reg &= ~USB_CTRL_MASK(USB_DEVICE_CTL1, PORT_MODE);
 373         reg |= mode;
 374         brcm_usb_writel(reg, USB_CTRL_REG(ctrl, USB_DEVICE_CTL1));
 375 }
 376
 377 static const struct brcm_usb_init_ops bcm7216_ops = {
 378         .init_ipp = usb_init_ipp,
 379         .init_common = usb_init_common,
 380         .init_xhci = usb_init_xhci,
 381         .uninit_common = usb_uninit_common,
 382         .uninit_xhci = usb_uninit_xhci,
 383         .get_dual_select = usb_get_dual_select,
 384         .set_dual_select = usb_set_dual_select,
 385 };
 386
 387 static const struct brcm_usb_init_ops bcm7211b0_ops = {
 388         .init_ipp = usb_init_ipp,
 389         .init_common = usb_init_common_7211b0,
 390         .init_xhci = usb_init_xhci,
 391         .uninit_common = usb_uninit_common_7211b0,
 392         .uninit_xhci = usb_uninit_xhci,
 393         .get_dual_select = usb_get_dual_select,
 394         .set_dual_select = usb_set_dual_select,
 395 };
 396
 397 void brcm_usb_dvr_init_7216(struct brcm_usb_init_params *params)
 398 {
 399
 400         pr_debug("%s\n", __func__);
 401
 402         params->family_name = "7216";
 403         params->ops = &bcm7216_ops;
 404 }
 405
 406 void brcm_usb_dvr_init_7211b0(struct brcm_usb_init_params *params)
 407 {
 408
 409         pr_debug("%s\n", __func__);
 410
 411         params->family_name = "7211";
 412         params->ops = &bcm7211b0_ops;
 413         params->suspend_with_clocks = true;
 414 }