12 This framework is designed to provide a generic interface for PHY
13 devices present in the kernel. This layer will have the generic
14 API by which phy drivers can create PHY using the phy framework and
15 phy users can obtain reference to the PHY. All the users of this
16 framework should select this config.
18 config PHY_BCM_NS_USB2
19 tristate "Broadcom Northstar USB 2.0 PHY Driver"
20 depends on ARCH_BCM_IPROC || COMPILE_TEST
21 depends on HAS_IOMEM && OF
24 Enable this to support Broadcom USB 2.0 PHY connected to the USB
25 controller on Northstar family.
28 tristate "Marvell Berlin USB PHY Driver"
29 depends on ARCH_BERLIN && RESET_CONTROLLER && HAS_IOMEM && OF
32 Enable this to support the USB PHY on Marvell Berlin SoCs.
34 config PHY_BERLIN_SATA
35 tristate "Marvell Berlin SATA PHY driver"
36 depends on ARCH_BERLIN && HAS_IOMEM && OF
39 Enable this to support the SATA PHY on Marvell Berlin SoCs.
41 config ARMADA375_USBCLUSTER_PHY
43 depends on MACH_ARMADA_375 || COMPILE_TEST
44 depends on OF && HAS_IOMEM
48 tristate "TI dm816x USB PHY driver"
49 depends on ARCH_OMAP2PLUS
50 depends on USB_SUPPORT
54 Enable this for dm816x USB to work.
56 config PHY_EXYNOS_MIPI_VIDEO
57 tristate "S5P/EXYNOS SoC series MIPI CSI-2/DSI PHY driver"
59 depends on ARCH_S5PV210 || ARCH_EXYNOS || COMPILE_TEST
61 default y if ARCH_S5PV210 || ARCH_EXYNOS
63 Support for MIPI CSI-2 and MIPI DSI DPHY found on Samsung S5P
66 config PHY_LPC18XX_USB_OTG
67 tristate "NXP LPC18xx/43xx SoC USB OTG PHY driver"
68 depends on OF && (ARCH_LPC18XX || COMPILE_TEST)
72 Enable this to support NXP LPC18xx/43xx internal USB OTG PHY.
74 This driver is need for USB0 support on LPC18xx/43xx and takes
75 care of enabling and clock setup.
77 config PHY_PXA_28NM_HSIC
78 tristate "Marvell USB HSIC 28nm PHY Driver"
82 Enable this to support Marvell USB HSIC PHY driver for Marvell
83 SoC. This driver will do the PHY initialization and shutdown.
84 The PHY driver will be used by Marvell ehci driver.
86 To compile this driver as a module, choose M here.
88 config PHY_PXA_28NM_USB2
89 tristate "Marvell USB 2.0 28nm PHY Driver"
93 Enable this to support Marvell USB 2.0 PHY driver for Marvell
94 SoC. This driver will do the PHY initialization and shutdown.
95 The PHY driver will be used by Marvell udc/ehci/otg driver.
97 To compile this driver as a module, choose M here.
101 depends on ARCH_DOVE || MACH_DOVE || MACH_KIRKWOOD
106 tristate "STMicroelectronics MIPHY28LP PHY driver for STiH407"
110 Enable this to support the miphy transceiver (for SATA/PCIE/USB3)
111 that is part of STMicroelectronics STiH407 SoC.
114 tristate "STMicroelectronics MIPHY365X PHY driver for STiH41x series"
120 Enable this to support the miphy transceiver (for SATA/PCIE)
121 that is part of STMicroelectronics STiH41x SoC series.
124 tristate "Renesas R-Car generation 2 USB PHY driver"
125 depends on ARCH_RENESAS
126 depends on GENERIC_PHY
128 Support for USB PHY found on Renesas R-Car generation 2 SoCs.
130 config PHY_RCAR_GEN3_USB2
131 tristate "Renesas R-Car generation 3 USB 2.0 PHY driver"
132 depends on ARCH_RENESAS
136 Support for USB 2.0 PHY found on Renesas R-Car generation 3 SoCs.
138 config OMAP_CONTROL_PHY
139 tristate "OMAP CONTROL PHY Driver"
140 depends on ARCH_OMAP2PLUS || COMPILE_TEST
142 Enable this to add support for the PHY part present in the control
143 module. This driver has API to power on the USB2 PHY and to write to
144 the mailbox. The mailbox is present only in omap4 and the register to
145 power on the USB2 PHY is present in OMAP4 and OMAP5. OMAP5 has an
146 additional register to power on USB3 PHY/SATA PHY/PCIE PHY
150 tristate "OMAP USB2 PHY Driver"
151 depends on ARCH_OMAP2PLUS
152 depends on USB_SUPPORT
155 select OMAP_CONTROL_PHY
156 depends on OMAP_OCP2SCP
158 Enable this to support the transceiver that is part of SOC. This
159 driver takes care of all the PHY functionality apart from comparator.
160 The USB OTG controller communicates with the comparator using this
164 tristate "TI PIPE3 PHY Driver"
165 depends on ARCH_OMAP2PLUS || COMPILE_TEST
167 select OMAP_CONTROL_PHY
168 depends on OMAP_OCP2SCP
170 Enable this to support the PIPE3 PHY that is part of TI SOCs. This
171 driver takes care of all the PHY functionality apart from comparator.
172 This driver interacts with the "OMAP Control PHY Driver" to power
176 tristate "TWL4030 USB Transceiver Driver"
177 depends on TWL4030_CORE && REGULATOR_TWL4030 && USB_MUSB_OMAP2PLUS
178 depends on USB_SUPPORT
179 depends on USB_GADGET || !USB_GADGET # if USB_GADGET=m, this can't 'y'
183 Enable this to support the USB OTG transceiver on TWL4030
184 family chips (including the TWL5030 and TPS659x0 devices).
185 This transceiver supports high and full speed devices plus,
186 in host mode, low speed.
188 config PHY_EXYNOS_DP_VIDEO
189 tristate "EXYNOS SoC series Display Port PHY driver"
191 depends on ARCH_EXYNOS || COMPILE_TEST
195 Support for Display Port PHY found on Samsung EXYNOS SoCs.
197 config BCM_KONA_USB2_PHY
198 tristate "Broadcom Kona USB2 PHY Driver"
202 Enable this to support the Broadcom Kona USB 2.0 PHY.
204 config PHY_EXYNOS5250_SATA
205 tristate "Exynos5250 Sata SerDes/PHY driver"
206 depends on SOC_EXYNOS5250
214 Enable this to support SATA SerDes/Phy found on Samsung's
215 Exynos5250 based SoCs.This SerDes/Phy supports SATA 1.5 Gb/s,
216 SATA 3.0 Gb/s, SATA 6.0 Gb/s speeds. It supports one SATA host
217 port to accept one SATA device.
219 config PHY_HIX5HD2_SATA
220 tristate "HIX5HD2 SATA PHY Driver"
221 depends on ARCH_HIX5HD2 && OF && HAS_IOMEM
225 Support for SATA PHY on Hisilicon hix5hd2 Soc.
227 config PHY_MT65XX_USB3
228 tristate "Mediatek USB3.0 PHY Driver"
229 depends on ARCH_MEDIATEK && OF
232 Say 'Y' here to add support for Mediatek USB3.0 PHY driver,
233 it supports multiple usb2.0 and usb3.0 ports.
235 config PHY_HI6220_USB
236 tristate "hi6220 USB PHY support"
237 depends on (ARCH_HISI && ARM64) || COMPILE_TEST
241 Enable this to support the HISILICON HI6220 USB PHY.
243 To compile this driver as a module, choose M here.
246 tristate "Allwinner sunxi SoC USB PHY driver"
247 depends on ARCH_SUNXI && HAS_IOMEM && OF
248 depends on RESET_CONTROLLER
250 depends on POWER_SUPPLY
253 Enable this to support the transceiver that is part of Allwinner
256 This driver controls the entire USB PHY block, both the USB OTG
257 parts, as well as the 2 regular USB 2 host PHYs.
260 tristate "Allwinner sun9i SoC USB PHY driver"
261 depends on ARCH_SUNXI && HAS_IOMEM && OF
262 depends on RESET_CONTROLLER
263 depends on USB_SUPPORT
267 Enable this to support the transceiver that is part of Allwinner
270 This driver controls each individual USB 2 host PHY.
272 config PHY_SAMSUNG_USB2
273 tristate "Samsung USB 2.0 PHY driver"
275 depends on USB_EHCI_EXYNOS || USB_OHCI_EXYNOS || USB_DWC2
280 Enable this to support the Samsung USB 2.0 PHY driver for Samsung
281 SoCs. This driver provides the interface for USB 2.0 PHY. Support
282 for particular PHYs will be enabled based on the SoC type in addition
285 config PHY_S5PV210_USB2
286 bool "Support for S5PV210"
287 depends on PHY_SAMSUNG_USB2
288 depends on ARCH_S5PV210
290 Enable USB PHY support for S5PV210. This option requires that Samsung
291 USB 2.0 PHY driver is enabled and means that support for this
292 particular SoC is compiled in the driver. In case of S5PV210 two phys
293 are available - device and host.
295 config PHY_EXYNOS4210_USB2
297 depends on PHY_SAMSUNG_USB2
298 default CPU_EXYNOS4210
300 config PHY_EXYNOS4X12_USB2
302 depends on PHY_SAMSUNG_USB2
303 default SOC_EXYNOS3250 || SOC_EXYNOS4212 || SOC_EXYNOS4412
305 config PHY_EXYNOS5250_USB2
307 depends on PHY_SAMSUNG_USB2
308 default SOC_EXYNOS5250 || SOC_EXYNOS5420
310 config PHY_EXYNOS5_USBDRD
311 tristate "Exynos5 SoC series USB DRD PHY driver"
312 depends on ARCH_EXYNOS && OF
314 depends on USB_DWC3_EXYNOS
319 Enable USB DRD PHY support for Exynos 5 SoC series.
320 This driver provides PHY interface for USB 3.0 DRD controller
321 present on Exynos5 SoC series.
323 config PHY_PISTACHIO_USB
324 tristate "IMG Pistachio USB2.0 PHY driver"
325 depends on MACH_PISTACHIO
328 Enable this to support the USB2.0 PHY on the IMG Pistachio SoC.
330 config PHY_QCOM_APQ8064_SATA
331 tristate "Qualcomm APQ8064 SATA SerDes/PHY driver"
337 config PHY_QCOM_IPQ806X_SATA
338 tristate "Qualcomm IPQ806x SATA SerDes/PHY driver"
344 config PHY_ROCKCHIP_USB
345 tristate "Rockchip USB2 PHY Driver"
346 depends on ARCH_ROCKCHIP && OF
349 Enable this to support the Rockchip USB 2.0 PHY.
351 config PHY_ROCKCHIP_EMMC
352 tristate "Rockchip EMMC PHY Driver"
353 depends on ARCH_ROCKCHIP && OF
356 Enable this to support the Rockchip EMMC PHY.
358 config PHY_ROCKCHIP_DP
359 tristate "Rockchip Display Port PHY Driver"
360 depends on ARCH_ROCKCHIP && OF
363 Enable this to support the Rockchip Display Port PHY.
365 config PHY_ST_SPEAR1310_MIPHY
366 tristate "ST SPEAR1310-MIPHY driver"
368 depends on MACH_SPEAR1310 || COMPILE_TEST
370 Support for ST SPEAr1310 MIPHY which can be used for PCIe and SATA.
372 config PHY_ST_SPEAR1340_MIPHY
373 tristate "ST SPEAR1340-MIPHY driver"
375 depends on MACH_SPEAR1340 || COMPILE_TEST
377 Support for ST SPEAr1340 MIPHY which can be used for PCIe and SATA.
380 tristate "APM X-Gene 15Gbps PHY support"
381 depends on HAS_IOMEM && OF && (ARM64 || COMPILE_TEST)
384 This option enables support for APM X-Gene SoC multi-purpose PHY.
386 config PHY_STIH407_USB
387 tristate "STMicroelectronics USB2 picoPHY driver for STiH407 family"
388 depends on RESET_CONTROLLER
389 depends on ARCH_STI || COMPILE_TEST
392 Enable this support to enable the picoPHY device used by USB2
393 and USB3 controllers on STMicroelectronics STiH407 SoC families.
395 config PHY_STIH41X_USB
396 tristate "STMicroelectronics USB2 PHY driver for STiH41x series"
400 Enable this to support the USB transceiver that is part of
401 STMicroelectronics STiH41x SoC series.
404 tristate "Qualcomm UFS PHY driver"
405 depends on OF && ARCH_QCOM
408 Support for UFS PHY on QCOM chipsets.
411 tristate "TI TUSB1210 ULPI PHY module"
412 depends on USB_ULPI_BUS
415 Support for TI TUSB1210 USB ULPI PHY.
418 tristate "Broadcom SATA PHY driver"
419 depends on ARCH_BRCMSTB || ARCH_BCM_IPROC || BMIPS_GENERIC || COMPILE_TEST
422 default ARCH_BCM_IPROC
424 Enable this to support the Broadcom SATA PHY.
427 config PHY_CYGNUS_PCIE
428 tristate "Broadcom Cygnus PCIe PHY driver"
429 depends on OF && (ARCH_BCM_CYGNUS || COMPILE_TEST)
431 default ARCH_BCM_CYGNUS
433 Enable this to support the Broadcom Cygnus PCIe PHY.
436 source "drivers/phy/tegra/Kconfig"