1 // SPDX-License-Identifier: GPL-2.0
3 * PCI detection and setup code
6 #include <linux/kernel.h>
7 #include <linux/delay.h>
8 #include <linux/init.h>
10 #include <linux/msi.h>
11 #include <linux/of_device.h>
12 #include <linux/of_pci.h>
13 #include <linux/pci_hotplug.h>
14 #include <linux/slab.h>
15 #include <linux/module.h>
16 #include <linux/cpumask.h>
17 #include <linux/aer.h>
18 #include <linux/acpi.h>
19 #include <linux/hypervisor.h>
20 #include <linux/irqdomain.h>
21 #include <linux/pm_runtime.h>
22 #include <linux/list_sort.h>
25 #define CARDBUS_LATENCY_TIMER 176 /* secondary latency timer */
26 #define CARDBUS_RESERVE_BUSNR 3
28 static struct resource busn_resource = {
32 .flags = IORESOURCE_BUS,
35 /* Ugh. Need to stop exporting this to modules. */
36 LIST_HEAD(pci_root_buses);
37 EXPORT_SYMBOL(pci_root_buses);
39 static LIST_HEAD(pci_domain_busn_res_list);
41 struct pci_domain_busn_res {
42 struct list_head list;
47 static struct resource *get_pci_domain_busn_res(int domain_nr)
49 struct pci_domain_busn_res *r;
51 list_for_each_entry(r, &pci_domain_busn_res_list, list)
52 if (r->domain_nr == domain_nr)
55 r = kzalloc(sizeof(*r), GFP_KERNEL);
59 r->domain_nr = domain_nr;
62 r->res.flags = IORESOURCE_BUS | IORESOURCE_PCI_FIXED;
64 list_add_tail(&r->list, &pci_domain_busn_res_list);
70 * Some device drivers need know if PCI is initiated.
71 * Basically, we think PCI is not initiated when there
72 * is no device to be found on the pci_bus_type.
74 int no_pci_devices(void)
79 dev = bus_find_next_device(&pci_bus_type, NULL);
80 no_devices = (dev == NULL);
84 EXPORT_SYMBOL(no_pci_devices);
89 static void release_pcibus_dev(struct device *dev)
91 struct pci_bus *pci_bus = to_pci_bus(dev);
93 put_device(pci_bus->bridge);
94 pci_bus_remove_resources(pci_bus);
95 pci_release_bus_of_node(pci_bus);
99 static struct class pcibus_class = {
101 .dev_release = &release_pcibus_dev,
102 .dev_groups = pcibus_groups,
105 static int __init pcibus_class_init(void)
107 return class_register(&pcibus_class);
109 postcore_initcall(pcibus_class_init);
111 static u64 pci_size(u64 base, u64 maxbase, u64 mask)
113 u64 size = mask & maxbase; /* Find the significant bits */
118 * Get the lowest of them to find the decode size, and from that
121 size = size & ~(size-1);
124 * base == maxbase can be valid only if the BAR has already been
125 * programmed with all 1s.
127 if (base == maxbase && ((base | (size - 1)) & mask) != mask)
133 static inline unsigned long decode_bar(struct pci_dev *dev, u32 bar)
138 if ((bar & PCI_BASE_ADDRESS_SPACE) == PCI_BASE_ADDRESS_SPACE_IO) {
139 flags = bar & ~PCI_BASE_ADDRESS_IO_MASK;
140 flags |= IORESOURCE_IO;
144 flags = bar & ~PCI_BASE_ADDRESS_MEM_MASK;
145 flags |= IORESOURCE_MEM;
146 if (flags & PCI_BASE_ADDRESS_MEM_PREFETCH)
147 flags |= IORESOURCE_PREFETCH;
149 mem_type = bar & PCI_BASE_ADDRESS_MEM_TYPE_MASK;
151 case PCI_BASE_ADDRESS_MEM_TYPE_32:
153 case PCI_BASE_ADDRESS_MEM_TYPE_1M:
154 /* 1M mem BAR treated as 32-bit BAR */
156 case PCI_BASE_ADDRESS_MEM_TYPE_64:
157 flags |= IORESOURCE_MEM_64;
160 /* mem unknown type treated as 32-bit BAR */
166 #define PCI_COMMAND_DECODE_ENABLE (PCI_COMMAND_MEMORY | PCI_COMMAND_IO)
169 * __pci_read_base - Read a PCI BAR
170 * @dev: the PCI device
171 * @type: type of the BAR
172 * @res: resource buffer to be filled in
173 * @pos: BAR position in the config space
175 * Returns 1 if the BAR is 64-bit, or 0 if 32-bit.
177 int __pci_read_base(struct pci_dev *dev, enum pci_bar_type type,
178 struct resource *res, unsigned int pos)
180 u32 l = 0, sz = 0, mask;
181 u64 l64, sz64, mask64;
183 struct pci_bus_region region, inverted_region;
185 mask = type ? PCI_ROM_ADDRESS_MASK : ~0;
187 /* No printks while decoding is disabled! */
188 if (!dev->mmio_always_on) {
189 pci_read_config_word(dev, PCI_COMMAND, &orig_cmd);
190 if (orig_cmd & PCI_COMMAND_DECODE_ENABLE) {
191 pci_write_config_word(dev, PCI_COMMAND,
192 orig_cmd & ~PCI_COMMAND_DECODE_ENABLE);
196 res->name = pci_name(dev);
198 pci_read_config_dword(dev, pos, &l);
199 pci_write_config_dword(dev, pos, l | mask);
200 pci_read_config_dword(dev, pos, &sz);
201 pci_write_config_dword(dev, pos, l);
204 * All bits set in sz means the device isn't working properly.
205 * If the BAR isn't implemented, all bits must be 0. If it's a
206 * memory BAR or a ROM, bit 0 must be clear; if it's an io BAR, bit
209 if (sz == 0xffffffff)
213 * I don't know how l can have all bits set. Copied from old code.
214 * Maybe it fixes a bug on some ancient platform.
219 if (type == pci_bar_unknown) {
220 res->flags = decode_bar(dev, l);
221 res->flags |= IORESOURCE_SIZEALIGN;
222 if (res->flags & IORESOURCE_IO) {
223 l64 = l & PCI_BASE_ADDRESS_IO_MASK;
224 sz64 = sz & PCI_BASE_ADDRESS_IO_MASK;
225 mask64 = PCI_BASE_ADDRESS_IO_MASK & (u32)IO_SPACE_LIMIT;
227 l64 = l & PCI_BASE_ADDRESS_MEM_MASK;
228 sz64 = sz & PCI_BASE_ADDRESS_MEM_MASK;
229 mask64 = (u32)PCI_BASE_ADDRESS_MEM_MASK;
232 if (l & PCI_ROM_ADDRESS_ENABLE)
233 res->flags |= IORESOURCE_ROM_ENABLE;
234 l64 = l & PCI_ROM_ADDRESS_MASK;
235 sz64 = sz & PCI_ROM_ADDRESS_MASK;
236 mask64 = PCI_ROM_ADDRESS_MASK;
239 if (res->flags & IORESOURCE_MEM_64) {
240 pci_read_config_dword(dev, pos + 4, &l);
241 pci_write_config_dword(dev, pos + 4, ~0);
242 pci_read_config_dword(dev, pos + 4, &sz);
243 pci_write_config_dword(dev, pos + 4, l);
245 l64 |= ((u64)l << 32);
246 sz64 |= ((u64)sz << 32);
247 mask64 |= ((u64)~0 << 32);
250 if (!dev->mmio_always_on && (orig_cmd & PCI_COMMAND_DECODE_ENABLE))
251 pci_write_config_word(dev, PCI_COMMAND, orig_cmd);
256 sz64 = pci_size(l64, sz64, mask64);
258 pci_info(dev, FW_BUG "reg 0x%x: invalid BAR (can't size)\n",
263 if (res->flags & IORESOURCE_MEM_64) {
264 if ((sizeof(pci_bus_addr_t) < 8 || sizeof(resource_size_t) < 8)
265 && sz64 > 0x100000000ULL) {
266 res->flags |= IORESOURCE_UNSET | IORESOURCE_DISABLED;
269 pci_err(dev, "reg 0x%x: can't handle BAR larger than 4GB (size %#010llx)\n",
270 pos, (unsigned long long)sz64);
274 if ((sizeof(pci_bus_addr_t) < 8) && l) {
275 /* Above 32-bit boundary; try to reallocate */
276 res->flags |= IORESOURCE_UNSET;
279 pci_info(dev, "reg 0x%x: can't handle BAR above 4GB (bus address %#010llx)\n",
280 pos, (unsigned long long)l64);
286 region.end = l64 + sz64 - 1;
288 pcibios_bus_to_resource(dev->bus, res, ®ion);
289 pcibios_resource_to_bus(dev->bus, &inverted_region, res);
292 * If "A" is a BAR value (a bus address), "bus_to_resource(A)" is
293 * the corresponding resource address (the physical address used by
294 * the CPU. Converting that resource address back to a bus address
295 * should yield the original BAR value:
297 * resource_to_bus(bus_to_resource(A)) == A
299 * If it doesn't, CPU accesses to "bus_to_resource(A)" will not
300 * be claimed by the device.
302 if (inverted_region.start != region.start) {
303 res->flags |= IORESOURCE_UNSET;
305 res->end = region.end - region.start;
306 pci_info(dev, "reg 0x%x: initial BAR value %#010llx invalid\n",
307 pos, (unsigned long long)region.start);
317 pci_info(dev, "reg 0x%x: %pR\n", pos, res);
319 return (res->flags & IORESOURCE_MEM_64) ? 1 : 0;
322 static void pci_read_bases(struct pci_dev *dev, unsigned int howmany, int rom)
324 unsigned int pos, reg;
326 if (dev->non_compliant_bars)
329 /* Per PCIe r4.0, sec 9.3.4.1.11, the VF BARs are all RO Zero */
333 for (pos = 0; pos < howmany; pos++) {
334 struct resource *res = &dev->resource[pos];
335 reg = PCI_BASE_ADDRESS_0 + (pos << 2);
336 pos += __pci_read_base(dev, pci_bar_unknown, res, reg);
340 struct resource *res = &dev->resource[PCI_ROM_RESOURCE];
341 dev->rom_base_reg = rom;
342 res->flags = IORESOURCE_MEM | IORESOURCE_PREFETCH |
343 IORESOURCE_READONLY | IORESOURCE_SIZEALIGN;
344 __pci_read_base(dev, pci_bar_mem32, res, rom);
348 static void pci_read_bridge_windows(struct pci_dev *bridge)
353 pci_read_config_word(bridge, PCI_IO_BASE, &io);
355 pci_write_config_word(bridge, PCI_IO_BASE, 0xe0f0);
356 pci_read_config_word(bridge, PCI_IO_BASE, &io);
357 pci_write_config_word(bridge, PCI_IO_BASE, 0x0);
360 bridge->io_window = 1;
363 * DECchip 21050 pass 2 errata: the bridge may miss an address
364 * disconnect boundary by one PCI data phase. Workaround: do not
365 * use prefetching on this device.
367 if (bridge->vendor == PCI_VENDOR_ID_DEC && bridge->device == 0x0001)
370 pci_read_config_dword(bridge, PCI_PREF_MEMORY_BASE, &pmem);
372 pci_write_config_dword(bridge, PCI_PREF_MEMORY_BASE,
374 pci_read_config_dword(bridge, PCI_PREF_MEMORY_BASE, &pmem);
375 pci_write_config_dword(bridge, PCI_PREF_MEMORY_BASE, 0x0);
380 bridge->pref_window = 1;
382 if ((pmem & PCI_PREF_RANGE_TYPE_MASK) == PCI_PREF_RANGE_TYPE_64) {
385 * Bridge claims to have a 64-bit prefetchable memory
386 * window; verify that the upper bits are actually
389 pci_read_config_dword(bridge, PCI_PREF_BASE_UPPER32, &pmem);
390 pci_write_config_dword(bridge, PCI_PREF_BASE_UPPER32,
392 pci_read_config_dword(bridge, PCI_PREF_BASE_UPPER32, &tmp);
393 pci_write_config_dword(bridge, PCI_PREF_BASE_UPPER32, pmem);
395 bridge->pref_64_window = 1;
399 static void pci_read_bridge_io(struct pci_bus *child)
401 struct pci_dev *dev = child->self;
402 u8 io_base_lo, io_limit_lo;
403 unsigned long io_mask, io_granularity, base, limit;
404 struct pci_bus_region region;
405 struct resource *res;
407 io_mask = PCI_IO_RANGE_MASK;
408 io_granularity = 0x1000;
409 if (dev->io_window_1k) {
410 /* Support 1K I/O space granularity */
411 io_mask = PCI_IO_1K_RANGE_MASK;
412 io_granularity = 0x400;
415 res = child->resource[0];
416 pci_read_config_byte(dev, PCI_IO_BASE, &io_base_lo);
417 pci_read_config_byte(dev, PCI_IO_LIMIT, &io_limit_lo);
418 base = (io_base_lo & io_mask) << 8;
419 limit = (io_limit_lo & io_mask) << 8;
421 if ((io_base_lo & PCI_IO_RANGE_TYPE_MASK) == PCI_IO_RANGE_TYPE_32) {
422 u16 io_base_hi, io_limit_hi;
424 pci_read_config_word(dev, PCI_IO_BASE_UPPER16, &io_base_hi);
425 pci_read_config_word(dev, PCI_IO_LIMIT_UPPER16, &io_limit_hi);
426 base |= ((unsigned long) io_base_hi << 16);
427 limit |= ((unsigned long) io_limit_hi << 16);
431 res->flags = (io_base_lo & PCI_IO_RANGE_TYPE_MASK) | IORESOURCE_IO;
433 region.end = limit + io_granularity - 1;
434 pcibios_bus_to_resource(dev->bus, res, ®ion);
435 pci_info(dev, " bridge window %pR\n", res);
439 static void pci_read_bridge_mmio(struct pci_bus *child)
441 struct pci_dev *dev = child->self;
442 u16 mem_base_lo, mem_limit_lo;
443 unsigned long base, limit;
444 struct pci_bus_region region;
445 struct resource *res;
447 res = child->resource[1];
448 pci_read_config_word(dev, PCI_MEMORY_BASE, &mem_base_lo);
449 pci_read_config_word(dev, PCI_MEMORY_LIMIT, &mem_limit_lo);
450 base = ((unsigned long) mem_base_lo & PCI_MEMORY_RANGE_MASK) << 16;
451 limit = ((unsigned long) mem_limit_lo & PCI_MEMORY_RANGE_MASK) << 16;
453 res->flags = (mem_base_lo & PCI_MEMORY_RANGE_TYPE_MASK) | IORESOURCE_MEM;
455 region.end = limit + 0xfffff;
456 pcibios_bus_to_resource(dev->bus, res, ®ion);
457 pci_info(dev, " bridge window %pR\n", res);
461 static void pci_read_bridge_mmio_pref(struct pci_bus *child)
463 struct pci_dev *dev = child->self;
464 u16 mem_base_lo, mem_limit_lo;
466 pci_bus_addr_t base, limit;
467 struct pci_bus_region region;
468 struct resource *res;
470 res = child->resource[2];
471 pci_read_config_word(dev, PCI_PREF_MEMORY_BASE, &mem_base_lo);
472 pci_read_config_word(dev, PCI_PREF_MEMORY_LIMIT, &mem_limit_lo);
473 base64 = (mem_base_lo & PCI_PREF_RANGE_MASK) << 16;
474 limit64 = (mem_limit_lo & PCI_PREF_RANGE_MASK) << 16;
476 if ((mem_base_lo & PCI_PREF_RANGE_TYPE_MASK) == PCI_PREF_RANGE_TYPE_64) {
477 u32 mem_base_hi, mem_limit_hi;
479 pci_read_config_dword(dev, PCI_PREF_BASE_UPPER32, &mem_base_hi);
480 pci_read_config_dword(dev, PCI_PREF_LIMIT_UPPER32, &mem_limit_hi);
483 * Some bridges set the base > limit by default, and some
484 * (broken) BIOSes do not initialize them. If we find
485 * this, just assume they are not being used.
487 if (mem_base_hi <= mem_limit_hi) {
488 base64 |= (u64) mem_base_hi << 32;
489 limit64 |= (u64) mem_limit_hi << 32;
493 base = (pci_bus_addr_t) base64;
494 limit = (pci_bus_addr_t) limit64;
496 if (base != base64) {
497 pci_err(dev, "can't handle bridge window above 4GB (bus address %#010llx)\n",
498 (unsigned long long) base64);
503 res->flags = (mem_base_lo & PCI_PREF_RANGE_TYPE_MASK) |
504 IORESOURCE_MEM | IORESOURCE_PREFETCH;
505 if (res->flags & PCI_PREF_RANGE_TYPE_64)
506 res->flags |= IORESOURCE_MEM_64;
508 region.end = limit + 0xfffff;
509 pcibios_bus_to_resource(dev->bus, res, ®ion);
510 pci_info(dev, " bridge window %pR\n", res);
514 void pci_read_bridge_bases(struct pci_bus *child)
516 struct pci_dev *dev = child->self;
517 struct resource *res;
520 if (pci_is_root_bus(child)) /* It's a host bus, nothing to read */
523 pci_info(dev, "PCI bridge to %pR%s\n",
525 dev->transparent ? " (subtractive decode)" : "");
527 pci_bus_remove_resources(child);
528 for (i = 0; i < PCI_BRIDGE_RESOURCE_NUM; i++)
529 child->resource[i] = &dev->resource[PCI_BRIDGE_RESOURCES+i];
531 pci_read_bridge_io(child);
532 pci_read_bridge_mmio(child);
533 pci_read_bridge_mmio_pref(child);
535 if (dev->transparent) {
536 pci_bus_for_each_resource(child->parent, res, i) {
537 if (res && res->flags) {
538 pci_bus_add_resource(child, res,
539 PCI_SUBTRACTIVE_DECODE);
540 pci_info(dev, " bridge window %pR (subtractive decode)\n",
547 static struct pci_bus *pci_alloc_bus(struct pci_bus *parent)
551 b = kzalloc(sizeof(*b), GFP_KERNEL);
555 INIT_LIST_HEAD(&b->node);
556 INIT_LIST_HEAD(&b->children);
557 INIT_LIST_HEAD(&b->devices);
558 INIT_LIST_HEAD(&b->slots);
559 INIT_LIST_HEAD(&b->resources);
560 b->max_bus_speed = PCI_SPEED_UNKNOWN;
561 b->cur_bus_speed = PCI_SPEED_UNKNOWN;
562 #ifdef CONFIG_PCI_DOMAINS_GENERIC
564 b->domain_nr = parent->domain_nr;
569 static void pci_release_host_bridge_dev(struct device *dev)
571 struct pci_host_bridge *bridge = to_pci_host_bridge(dev);
573 if (bridge->release_fn)
574 bridge->release_fn(bridge);
576 pci_free_resource_list(&bridge->windows);
577 pci_free_resource_list(&bridge->dma_ranges);
581 static void pci_init_host_bridge(struct pci_host_bridge *bridge)
583 INIT_LIST_HEAD(&bridge->windows);
584 INIT_LIST_HEAD(&bridge->dma_ranges);
587 * We assume we can manage these PCIe features. Some systems may
588 * reserve these for use by the platform itself, e.g., an ACPI BIOS
589 * may implement its own AER handling and use _OSC to prevent the
590 * OS from interfering.
592 bridge->native_aer = 1;
593 bridge->native_pcie_hotplug = 1;
594 bridge->native_shpc_hotplug = 1;
595 bridge->native_pme = 1;
596 bridge->native_ltr = 1;
597 bridge->native_dpc = 1;
599 device_initialize(&bridge->dev);
602 struct pci_host_bridge *pci_alloc_host_bridge(size_t priv)
604 struct pci_host_bridge *bridge;
606 bridge = kzalloc(sizeof(*bridge) + priv, GFP_KERNEL);
610 pci_init_host_bridge(bridge);
611 bridge->dev.release = pci_release_host_bridge_dev;
615 EXPORT_SYMBOL(pci_alloc_host_bridge);
617 static void devm_pci_alloc_host_bridge_release(void *data)
619 pci_free_host_bridge(data);
622 struct pci_host_bridge *devm_pci_alloc_host_bridge(struct device *dev,
626 struct pci_host_bridge *bridge;
628 bridge = pci_alloc_host_bridge(priv);
632 bridge->dev.parent = dev;
634 ret = devm_add_action_or_reset(dev, devm_pci_alloc_host_bridge_release,
639 ret = devm_of_pci_bridge_init(dev, bridge);
645 EXPORT_SYMBOL(devm_pci_alloc_host_bridge);
647 void pci_free_host_bridge(struct pci_host_bridge *bridge)
649 put_device(&bridge->dev);
651 EXPORT_SYMBOL(pci_free_host_bridge);
653 /* Indexed by PCI_X_SSTATUS_FREQ (secondary bus mode and frequency) */
654 static const unsigned char pcix_bus_speed[] = {
655 PCI_SPEED_UNKNOWN, /* 0 */
656 PCI_SPEED_66MHz_PCIX, /* 1 */
657 PCI_SPEED_100MHz_PCIX, /* 2 */
658 PCI_SPEED_133MHz_PCIX, /* 3 */
659 PCI_SPEED_UNKNOWN, /* 4 */
660 PCI_SPEED_66MHz_PCIX_ECC, /* 5 */
661 PCI_SPEED_100MHz_PCIX_ECC, /* 6 */
662 PCI_SPEED_133MHz_PCIX_ECC, /* 7 */
663 PCI_SPEED_UNKNOWN, /* 8 */
664 PCI_SPEED_66MHz_PCIX_266, /* 9 */
665 PCI_SPEED_100MHz_PCIX_266, /* A */
666 PCI_SPEED_133MHz_PCIX_266, /* B */
667 PCI_SPEED_UNKNOWN, /* C */
668 PCI_SPEED_66MHz_PCIX_533, /* D */
669 PCI_SPEED_100MHz_PCIX_533, /* E */
670 PCI_SPEED_133MHz_PCIX_533 /* F */
673 /* Indexed by PCI_EXP_LNKCAP_SLS, PCI_EXP_LNKSTA_CLS */
674 const unsigned char pcie_link_speed[] = {
675 PCI_SPEED_UNKNOWN, /* 0 */
676 PCIE_SPEED_2_5GT, /* 1 */
677 PCIE_SPEED_5_0GT, /* 2 */
678 PCIE_SPEED_8_0GT, /* 3 */
679 PCIE_SPEED_16_0GT, /* 4 */
680 PCIE_SPEED_32_0GT, /* 5 */
681 PCIE_SPEED_64_0GT, /* 6 */
682 PCI_SPEED_UNKNOWN, /* 7 */
683 PCI_SPEED_UNKNOWN, /* 8 */
684 PCI_SPEED_UNKNOWN, /* 9 */
685 PCI_SPEED_UNKNOWN, /* A */
686 PCI_SPEED_UNKNOWN, /* B */
687 PCI_SPEED_UNKNOWN, /* C */
688 PCI_SPEED_UNKNOWN, /* D */
689 PCI_SPEED_UNKNOWN, /* E */
690 PCI_SPEED_UNKNOWN /* F */
692 EXPORT_SYMBOL_GPL(pcie_link_speed);
694 const char *pci_speed_string(enum pci_bus_speed speed)
696 /* Indexed by the pci_bus_speed enum */
697 static const char *speed_strings[] = {
698 "33 MHz PCI", /* 0x00 */
699 "66 MHz PCI", /* 0x01 */
700 "66 MHz PCI-X", /* 0x02 */
701 "100 MHz PCI-X", /* 0x03 */
702 "133 MHz PCI-X", /* 0x04 */
707 "66 MHz PCI-X 266", /* 0x09 */
708 "100 MHz PCI-X 266", /* 0x0a */
709 "133 MHz PCI-X 266", /* 0x0b */
710 "Unknown AGP", /* 0x0c */
715 "66 MHz PCI-X 533", /* 0x11 */
716 "100 MHz PCI-X 533", /* 0x12 */
717 "133 MHz PCI-X 533", /* 0x13 */
718 "2.5 GT/s PCIe", /* 0x14 */
719 "5.0 GT/s PCIe", /* 0x15 */
720 "8.0 GT/s PCIe", /* 0x16 */
721 "16.0 GT/s PCIe", /* 0x17 */
722 "32.0 GT/s PCIe", /* 0x18 */
723 "64.0 GT/s PCIe", /* 0x19 */
726 if (speed < ARRAY_SIZE(speed_strings))
727 return speed_strings[speed];
730 EXPORT_SYMBOL_GPL(pci_speed_string);
732 void pcie_update_link_speed(struct pci_bus *bus, u16 linksta)
734 bus->cur_bus_speed = pcie_link_speed[linksta & PCI_EXP_LNKSTA_CLS];
736 EXPORT_SYMBOL_GPL(pcie_update_link_speed);
738 static unsigned char agp_speeds[] = {
746 static enum pci_bus_speed agp_speed(int agp3, int agpstat)
752 else if (agpstat & 2)
754 else if (agpstat & 1)
766 return agp_speeds[index];
769 static void pci_set_bus_speed(struct pci_bus *bus)
771 struct pci_dev *bridge = bus->self;
774 pos = pci_find_capability(bridge, PCI_CAP_ID_AGP);
776 pos = pci_find_capability(bridge, PCI_CAP_ID_AGP3);
780 pci_read_config_dword(bridge, pos + PCI_AGP_STATUS, &agpstat);
781 bus->max_bus_speed = agp_speed(agpstat & 8, agpstat & 7);
783 pci_read_config_dword(bridge, pos + PCI_AGP_COMMAND, &agpcmd);
784 bus->cur_bus_speed = agp_speed(agpstat & 8, agpcmd & 7);
787 pos = pci_find_capability(bridge, PCI_CAP_ID_PCIX);
790 enum pci_bus_speed max;
792 pci_read_config_word(bridge, pos + PCI_X_BRIDGE_SSTATUS,
795 if (status & PCI_X_SSTATUS_533MHZ) {
796 max = PCI_SPEED_133MHz_PCIX_533;
797 } else if (status & PCI_X_SSTATUS_266MHZ) {
798 max = PCI_SPEED_133MHz_PCIX_266;
799 } else if (status & PCI_X_SSTATUS_133MHZ) {
800 if ((status & PCI_X_SSTATUS_VERS) == PCI_X_SSTATUS_V2)
801 max = PCI_SPEED_133MHz_PCIX_ECC;
803 max = PCI_SPEED_133MHz_PCIX;
805 max = PCI_SPEED_66MHz_PCIX;
808 bus->max_bus_speed = max;
809 bus->cur_bus_speed = pcix_bus_speed[
810 (status & PCI_X_SSTATUS_FREQ) >> 6];
815 if (pci_is_pcie(bridge)) {
819 pcie_capability_read_dword(bridge, PCI_EXP_LNKCAP, &linkcap);
820 bus->max_bus_speed = pcie_link_speed[linkcap & PCI_EXP_LNKCAP_SLS];
821 bridge->link_active_reporting = !!(linkcap & PCI_EXP_LNKCAP_DLLLARC);
823 pcie_capability_read_word(bridge, PCI_EXP_LNKSTA, &linksta);
824 pcie_update_link_speed(bus, linksta);
828 static struct irq_domain *pci_host_bridge_msi_domain(struct pci_bus *bus)
830 struct irq_domain *d;
833 * Any firmware interface that can resolve the msi_domain
834 * should be called from here.
836 d = pci_host_bridge_of_msi_domain(bus);
838 d = pci_host_bridge_acpi_msi_domain(bus);
840 #ifdef CONFIG_PCI_MSI_IRQ_DOMAIN
842 * If no IRQ domain was found via the OF tree, try looking it up
843 * directly through the fwnode_handle.
846 struct fwnode_handle *fwnode = pci_root_bus_fwnode(bus);
849 d = irq_find_matching_fwnode(fwnode,
857 static void pci_set_bus_msi_domain(struct pci_bus *bus)
859 struct irq_domain *d;
863 * The bus can be a root bus, a subordinate bus, or a virtual bus
864 * created by an SR-IOV device. Walk up to the first bridge device
865 * found or derive the domain from the host bridge.
867 for (b = bus, d = NULL; !d && !pci_is_root_bus(b); b = b->parent) {
869 d = dev_get_msi_domain(&b->self->dev);
873 d = pci_host_bridge_msi_domain(b);
875 dev_set_msi_domain(&bus->dev, d);
878 static int res_cmp(void *priv, const struct list_head *a,
879 const struct list_head *b)
881 struct resource_entry *entry1, *entry2;
883 entry1 = container_of(a, struct resource_entry, node);
884 entry2 = container_of(b, struct resource_entry, node);
886 if (entry1->res->flags != entry2->res->flags)
887 return entry1->res->flags > entry2->res->flags;
889 if (entry1->offset != entry2->offset)
890 return entry1->offset > entry2->offset;
892 return entry1->res->start > entry2->res->start;
895 static int pci_register_host_bridge(struct pci_host_bridge *bridge)
897 struct device *parent = bridge->dev.parent;
898 struct resource_entry *window, *next, *n;
899 struct pci_bus *bus, *b;
900 resource_size_t offset, next_offset;
901 LIST_HEAD(resources);
902 struct resource *res, *next_res;
907 bus = pci_alloc_bus(NULL);
913 /* Temporarily move resources off the list */
914 list_splice_init(&bridge->windows, &resources);
915 bus->sysdata = bridge->sysdata;
916 bus->ops = bridge->ops;
917 bus->number = bus->busn_res.start = bridge->busnr;
918 #ifdef CONFIG_PCI_DOMAINS_GENERIC
919 bus->domain_nr = pci_bus_find_domain_nr(bus, parent);
922 b = pci_find_bus(pci_domain_nr(bus), bridge->busnr);
924 /* Ignore it if we already got here via a different bridge */
925 dev_dbg(&b->dev, "bus already known\n");
930 dev_set_name(&bridge->dev, "pci%04x:%02x", pci_domain_nr(bus),
933 err = pcibios_root_bridge_prepare(bridge);
937 err = device_add(&bridge->dev);
939 put_device(&bridge->dev);
942 bus->bridge = get_device(&bridge->dev);
943 device_enable_async_suspend(bus->bridge);
944 pci_set_bus_of_node(bus);
945 pci_set_bus_msi_domain(bus);
946 if (bridge->msi_domain && !dev_get_msi_domain(&bus->dev) &&
947 !pci_host_of_has_msi_map(parent))
948 bus->bus_flags |= PCI_BUS_FLAGS_NO_MSI;
951 set_dev_node(bus->bridge, pcibus_to_node(bus));
953 bus->dev.class = &pcibus_class;
954 bus->dev.parent = bus->bridge;
956 dev_set_name(&bus->dev, "%04x:%02x", pci_domain_nr(bus), bus->number);
957 name = dev_name(&bus->dev);
959 err = device_register(&bus->dev);
963 pcibios_add_bus(bus);
965 if (bus->ops->add_bus) {
966 err = bus->ops->add_bus(bus);
967 if (WARN_ON(err < 0))
968 dev_err(&bus->dev, "failed to add bus: %d\n", err);
971 /* Create legacy_io and legacy_mem files for this bus */
972 pci_create_legacy_files(bus);
975 dev_info(parent, "PCI host bridge to bus %s\n", name);
977 pr_info("PCI host bridge to bus %s\n", name);
979 if (nr_node_ids > 1 && pcibus_to_node(bus) == NUMA_NO_NODE)
980 dev_warn(&bus->dev, "Unknown NUMA node; performance will be reduced\n");
982 /* Sort and coalesce contiguous windows */
983 list_sort(NULL, &resources, res_cmp);
984 resource_list_for_each_entry_safe(window, n, &resources) {
985 if (list_is_last(&window->node, &resources))
988 next = list_next_entry(window, node);
989 offset = window->offset;
991 next_offset = next->offset;
992 next_res = next->res;
994 if (res->flags != next_res->flags || offset != next_offset)
997 if (res->end + 1 == next_res->start) {
998 next_res->start = res->start;
999 res->flags = res->start = res->end = 0;
1003 /* Add initial resources to the bus */
1004 resource_list_for_each_entry_safe(window, n, &resources) {
1005 offset = window->offset;
1010 list_move_tail(&window->node, &bridge->windows);
1012 if (res->flags & IORESOURCE_BUS)
1013 pci_bus_insert_busn_res(bus, bus->number, res->end);
1015 pci_bus_add_resource(bus, res, 0);
1018 if (resource_type(res) == IORESOURCE_IO)
1019 fmt = " (bus address [%#06llx-%#06llx])";
1021 fmt = " (bus address [%#010llx-%#010llx])";
1023 snprintf(addr, sizeof(addr), fmt,
1024 (unsigned long long)(res->start - offset),
1025 (unsigned long long)(res->end - offset));
1029 dev_info(&bus->dev, "root bus resource %pR%s\n", res, addr);
1032 down_write(&pci_bus_sem);
1033 list_add_tail(&bus->node, &pci_root_buses);
1034 up_write(&pci_bus_sem);
1039 put_device(&bridge->dev);
1040 device_del(&bridge->dev);
1047 static bool pci_bridge_child_ext_cfg_accessible(struct pci_dev *bridge)
1053 * If extended config space isn't accessible on a bridge's primary
1054 * bus, we certainly can't access it on the secondary bus.
1056 if (bridge->bus->bus_flags & PCI_BUS_FLAGS_NO_EXTCFG)
1060 * PCIe Root Ports and switch ports are PCIe on both sides, so if
1061 * extended config space is accessible on the primary, it's also
1062 * accessible on the secondary.
1064 if (pci_is_pcie(bridge) &&
1065 (pci_pcie_type(bridge) == PCI_EXP_TYPE_ROOT_PORT ||
1066 pci_pcie_type(bridge) == PCI_EXP_TYPE_UPSTREAM ||
1067 pci_pcie_type(bridge) == PCI_EXP_TYPE_DOWNSTREAM))
1071 * For the other bridge types:
1072 * - PCI-to-PCI bridges
1073 * - PCIe-to-PCI/PCI-X forward bridges
1074 * - PCI/PCI-X-to-PCIe reverse bridges
1075 * extended config space on the secondary side is only accessible
1076 * if the bridge supports PCI-X Mode 2.
1078 pos = pci_find_capability(bridge, PCI_CAP_ID_PCIX);
1082 pci_read_config_dword(bridge, pos + PCI_X_STATUS, &status);
1083 return status & (PCI_X_STATUS_266MHZ | PCI_X_STATUS_533MHZ);
1086 static struct pci_bus *pci_alloc_child_bus(struct pci_bus *parent,
1087 struct pci_dev *bridge, int busnr)
1089 struct pci_bus *child;
1090 struct pci_host_bridge *host;
1094 /* Allocate a new bus and inherit stuff from the parent */
1095 child = pci_alloc_bus(parent);
1099 child->parent = parent;
1100 child->sysdata = parent->sysdata;
1101 child->bus_flags = parent->bus_flags;
1103 host = pci_find_host_bridge(parent);
1104 if (host->child_ops)
1105 child->ops = host->child_ops;
1107 child->ops = parent->ops;
1110 * Initialize some portions of the bus device, but don't register
1111 * it now as the parent is not properly set up yet.
1113 child->dev.class = &pcibus_class;
1114 dev_set_name(&child->dev, "%04x:%02x", pci_domain_nr(child), busnr);
1116 /* Set up the primary, secondary and subordinate bus numbers */
1117 child->number = child->busn_res.start = busnr;
1118 child->primary = parent->busn_res.start;
1119 child->busn_res.end = 0xff;
1122 child->dev.parent = parent->bridge;
1126 child->self = bridge;
1127 child->bridge = get_device(&bridge->dev);
1128 child->dev.parent = child->bridge;
1129 pci_set_bus_of_node(child);
1130 pci_set_bus_speed(child);
1133 * Check whether extended config space is accessible on the child
1134 * bus. Note that we currently assume it is always accessible on
1137 if (!pci_bridge_child_ext_cfg_accessible(bridge)) {
1138 child->bus_flags |= PCI_BUS_FLAGS_NO_EXTCFG;
1139 pci_info(child, "extended config space not accessible\n");
1142 /* Set up default resource pointers and names */
1143 for (i = 0; i < PCI_BRIDGE_RESOURCE_NUM; i++) {
1144 child->resource[i] = &bridge->resource[PCI_BRIDGE_RESOURCES+i];
1145 child->resource[i]->name = child->name;
1147 bridge->subordinate = child;
1150 pci_set_bus_msi_domain(child);
1151 ret = device_register(&child->dev);
1154 pcibios_add_bus(child);
1156 if (child->ops->add_bus) {
1157 ret = child->ops->add_bus(child);
1158 if (WARN_ON(ret < 0))
1159 dev_err(&child->dev, "failed to add bus: %d\n", ret);
1162 /* Create legacy_io and legacy_mem files for this bus */
1163 pci_create_legacy_files(child);
1168 struct pci_bus *pci_add_new_bus(struct pci_bus *parent, struct pci_dev *dev,
1171 struct pci_bus *child;
1173 child = pci_alloc_child_bus(parent, dev, busnr);
1175 down_write(&pci_bus_sem);
1176 list_add_tail(&child->node, &parent->children);
1177 up_write(&pci_bus_sem);
1181 EXPORT_SYMBOL(pci_add_new_bus);
1183 static void pci_enable_crs(struct pci_dev *pdev)
1187 /* Enable CRS Software Visibility if supported */
1188 pcie_capability_read_word(pdev, PCI_EXP_RTCAP, &root_cap);
1189 if (root_cap & PCI_EXP_RTCAP_CRSVIS)
1190 pcie_capability_set_word(pdev, PCI_EXP_RTCTL,
1191 PCI_EXP_RTCTL_CRSSVE);
1194 static unsigned int pci_scan_child_bus_extend(struct pci_bus *bus,
1195 unsigned int available_buses);
1197 * pci_ea_fixed_busnrs() - Read fixed Secondary and Subordinate bus
1198 * numbers from EA capability.
1200 * @sec: updated with secondary bus number from EA
1201 * @sub: updated with subordinate bus number from EA
1203 * If @dev is a bridge with EA capability that specifies valid secondary
1204 * and subordinate bus numbers, return true with the bus numbers in @sec
1205 * and @sub. Otherwise return false.
1207 static bool pci_ea_fixed_busnrs(struct pci_dev *dev, u8 *sec, u8 *sub)
1213 if (dev->hdr_type != PCI_HEADER_TYPE_BRIDGE)
1216 /* find PCI EA capability in list */
1217 ea = pci_find_capability(dev, PCI_CAP_ID_EA);
1221 offset = ea + PCI_EA_FIRST_ENT;
1222 pci_read_config_dword(dev, offset, &dw);
1223 ea_sec = dw & PCI_EA_SEC_BUS_MASK;
1224 ea_sub = (dw & PCI_EA_SUB_BUS_MASK) >> PCI_EA_SUB_BUS_SHIFT;
1225 if (ea_sec == 0 || ea_sub < ea_sec)
1234 * pci_scan_bridge_extend() - Scan buses behind a bridge
1235 * @bus: Parent bus the bridge is on
1236 * @dev: Bridge itself
1237 * @max: Starting subordinate number of buses behind this bridge
1238 * @available_buses: Total number of buses available for this bridge and
1239 * the devices below. After the minimal bus space has
1240 * been allocated the remaining buses will be
1241 * distributed equally between hotplug-capable bridges.
1242 * @pass: Either %0 (scan already configured bridges) or %1 (scan bridges
1243 * that need to be reconfigured.
1245 * If it's a bridge, configure it and scan the bus behind it.
1246 * For CardBus bridges, we don't scan behind as the devices will
1247 * be handled by the bridge driver itself.
1249 * We need to process bridges in two passes -- first we scan those
1250 * already configured by the BIOS and after we are done with all of
1251 * them, we proceed to assigning numbers to the remaining buses in
1252 * order to avoid overlaps between old and new bus numbers.
1254 * Return: New subordinate number covering all buses behind this bridge.
1256 static int pci_scan_bridge_extend(struct pci_bus *bus, struct pci_dev *dev,
1257 int max, unsigned int available_buses,
1260 struct pci_bus *child;
1261 int is_cardbus = (dev->hdr_type == PCI_HEADER_TYPE_CARDBUS);
1262 u32 buses, i, j = 0;
1264 u8 primary, secondary, subordinate;
1267 u8 fixed_sec, fixed_sub;
1271 * Make sure the bridge is powered on to be able to access config
1272 * space of devices below it.
1274 pm_runtime_get_sync(&dev->dev);
1276 pci_read_config_dword(dev, PCI_PRIMARY_BUS, &buses);
1277 primary = buses & 0xFF;
1278 secondary = (buses >> 8) & 0xFF;
1279 subordinate = (buses >> 16) & 0xFF;
1281 pci_dbg(dev, "scanning [bus %02x-%02x] behind bridge, pass %d\n",
1282 secondary, subordinate, pass);
1284 if (!primary && (primary != bus->number) && secondary && subordinate) {
1285 pci_warn(dev, "Primary bus is hard wired to 0\n");
1286 primary = bus->number;
1289 /* Check if setup is sensible at all */
1291 (primary != bus->number || secondary <= bus->number ||
1292 secondary > subordinate)) {
1293 pci_info(dev, "bridge configuration invalid ([bus %02x-%02x]), reconfiguring\n",
1294 secondary, subordinate);
1299 * Disable Master-Abort Mode during probing to avoid reporting of
1300 * bus errors in some architectures.
1302 pci_read_config_word(dev, PCI_BRIDGE_CONTROL, &bctl);
1303 pci_write_config_word(dev, PCI_BRIDGE_CONTROL,
1304 bctl & ~PCI_BRIDGE_CTL_MASTER_ABORT);
1306 pci_enable_crs(dev);
1308 if ((secondary || subordinate) && !pcibios_assign_all_busses() &&
1309 !is_cardbus && !broken) {
1313 * Bus already configured by firmware, process it in the
1314 * first pass and just note the configuration.
1320 * The bus might already exist for two reasons: Either we
1321 * are rescanning the bus or the bus is reachable through
1322 * more than one bridge. The second case can happen with
1323 * the i450NX chipset.
1325 child = pci_find_bus(pci_domain_nr(bus), secondary);
1327 child = pci_add_new_bus(bus, dev, secondary);
1330 child->primary = primary;
1331 pci_bus_insert_busn_res(child, secondary, subordinate);
1332 child->bridge_ctl = bctl;
1335 cmax = pci_scan_child_bus(child);
1336 if (cmax > subordinate)
1337 pci_warn(dev, "bridge has subordinate %02x but max busn %02x\n",
1340 /* Subordinate should equal child->busn_res.end */
1341 if (subordinate > max)
1346 * We need to assign a number to this bus which we always
1347 * do in the second pass.
1350 if (pcibios_assign_all_busses() || broken || is_cardbus)
1353 * Temporarily disable forwarding of the
1354 * configuration cycles on all bridges in
1355 * this bus segment to avoid possible
1356 * conflicts in the second pass between two
1357 * bridges programmed with overlapping bus
1360 pci_write_config_dword(dev, PCI_PRIMARY_BUS,
1366 pci_write_config_word(dev, PCI_STATUS, 0xffff);
1368 /* Read bus numbers from EA Capability (if present) */
1369 fixed_buses = pci_ea_fixed_busnrs(dev, &fixed_sec, &fixed_sub);
1371 next_busnr = fixed_sec;
1373 next_busnr = max + 1;
1376 * Prevent assigning a bus number that already exists.
1377 * This can happen when a bridge is hot-plugged, so in this
1378 * case we only re-scan this bus.
1380 child = pci_find_bus(pci_domain_nr(bus), next_busnr);
1382 child = pci_add_new_bus(bus, dev, next_busnr);
1385 pci_bus_insert_busn_res(child, next_busnr,
1389 if (available_buses)
1392 buses = (buses & 0xff000000)
1393 | ((unsigned int)(child->primary) << 0)
1394 | ((unsigned int)(child->busn_res.start) << 8)
1395 | ((unsigned int)(child->busn_res.end) << 16);
1398 * yenta.c forces a secondary latency timer of 176.
1399 * Copy that behaviour here.
1402 buses &= ~0xff000000;
1403 buses |= CARDBUS_LATENCY_TIMER << 24;
1406 /* We need to blast all three values with a single write */
1407 pci_write_config_dword(dev, PCI_PRIMARY_BUS, buses);
1410 child->bridge_ctl = bctl;
1411 max = pci_scan_child_bus_extend(child, available_buses);
1415 * For CardBus bridges, we leave 4 bus numbers as
1416 * cards with a PCI-to-PCI bridge can be inserted
1419 for (i = 0; i < CARDBUS_RESERVE_BUSNR; i++) {
1420 struct pci_bus *parent = bus;
1421 if (pci_find_bus(pci_domain_nr(bus),
1424 while (parent->parent) {
1425 if ((!pcibios_assign_all_busses()) &&
1426 (parent->busn_res.end > max) &&
1427 (parent->busn_res.end <= max+i)) {
1430 parent = parent->parent;
1435 * Often, there are two CardBus
1436 * bridges -- try to leave one
1437 * valid bus number for each one.
1447 * Set subordinate bus number to its real value.
1448 * If fixed subordinate bus number exists from EA
1449 * capability then use it.
1453 pci_bus_update_busn_res_end(child, max);
1454 pci_write_config_byte(dev, PCI_SUBORDINATE_BUS, max);
1457 sprintf(child->name,
1458 (is_cardbus ? "PCI CardBus %04x:%02x" : "PCI Bus %04x:%02x"),
1459 pci_domain_nr(bus), child->number);
1461 /* Check that all devices are accessible */
1462 while (bus->parent) {
1463 if ((child->busn_res.end > bus->busn_res.end) ||
1464 (child->number > bus->busn_res.end) ||
1465 (child->number < bus->number) ||
1466 (child->busn_res.end < bus->number)) {
1467 dev_info(&dev->dev, "devices behind bridge are unusable because %pR cannot be assigned for them\n",
1475 pci_write_config_word(dev, PCI_BRIDGE_CONTROL, bctl);
1477 pm_runtime_put(&dev->dev);
1483 * pci_scan_bridge() - Scan buses behind a bridge
1484 * @bus: Parent bus the bridge is on
1485 * @dev: Bridge itself
1486 * @max: Starting subordinate number of buses behind this bridge
1487 * @pass: Either %0 (scan already configured bridges) or %1 (scan bridges
1488 * that need to be reconfigured.
1490 * If it's a bridge, configure it and scan the bus behind it.
1491 * For CardBus bridges, we don't scan behind as the devices will
1492 * be handled by the bridge driver itself.
1494 * We need to process bridges in two passes -- first we scan those
1495 * already configured by the BIOS and after we are done with all of
1496 * them, we proceed to assigning numbers to the remaining buses in
1497 * order to avoid overlaps between old and new bus numbers.
1499 * Return: New subordinate number covering all buses behind this bridge.
1501 int pci_scan_bridge(struct pci_bus *bus, struct pci_dev *dev, int max, int pass)
1503 return pci_scan_bridge_extend(bus, dev, max, 0, pass);
1505 EXPORT_SYMBOL(pci_scan_bridge);
1508 * Read interrupt line and base address registers.
1509 * The architecture-dependent code can tweak these, of course.
1511 static void pci_read_irq(struct pci_dev *dev)
1515 /* VFs are not allowed to use INTx, so skip the config reads */
1516 if (dev->is_virtfn) {
1522 pci_read_config_byte(dev, PCI_INTERRUPT_PIN, &irq);
1525 pci_read_config_byte(dev, PCI_INTERRUPT_LINE, &irq);
1529 void set_pcie_port_type(struct pci_dev *pdev)
1534 struct pci_dev *parent;
1536 pos = pci_find_capability(pdev, PCI_CAP_ID_EXP);
1540 pdev->pcie_cap = pos;
1541 pci_read_config_word(pdev, pos + PCI_EXP_FLAGS, ®16);
1542 pdev->pcie_flags_reg = reg16;
1543 pci_read_config_word(pdev, pos + PCI_EXP_DEVCAP, ®16);
1544 pdev->pcie_mpss = reg16 & PCI_EXP_DEVCAP_PAYLOAD;
1546 parent = pci_upstream_bridge(pdev);
1551 * Some systems do not identify their upstream/downstream ports
1552 * correctly so detect impossible configurations here and correct
1553 * the port type accordingly.
1555 type = pci_pcie_type(pdev);
1556 if (type == PCI_EXP_TYPE_DOWNSTREAM) {
1558 * If pdev claims to be downstream port but the parent
1559 * device is also downstream port assume pdev is actually
1562 if (pcie_downstream_port(parent)) {
1563 pci_info(pdev, "claims to be downstream port but is acting as upstream port, correcting type\n");
1564 pdev->pcie_flags_reg &= ~PCI_EXP_FLAGS_TYPE;
1565 pdev->pcie_flags_reg |= PCI_EXP_TYPE_UPSTREAM;
1567 } else if (type == PCI_EXP_TYPE_UPSTREAM) {
1569 * If pdev claims to be upstream port but the parent
1570 * device is also upstream port assume pdev is actually
1573 if (pci_pcie_type(parent) == PCI_EXP_TYPE_UPSTREAM) {
1574 pci_info(pdev, "claims to be upstream port but is acting as downstream port, correcting type\n");
1575 pdev->pcie_flags_reg &= ~PCI_EXP_FLAGS_TYPE;
1576 pdev->pcie_flags_reg |= PCI_EXP_TYPE_DOWNSTREAM;
1581 void set_pcie_hotplug_bridge(struct pci_dev *pdev)
1585 pcie_capability_read_dword(pdev, PCI_EXP_SLTCAP, ®32);
1586 if (reg32 & PCI_EXP_SLTCAP_HPC)
1587 pdev->is_hotplug_bridge = 1;
1590 static void set_pcie_thunderbolt(struct pci_dev *dev)
1595 while ((vsec = pci_find_next_ext_capability(dev, vsec,
1596 PCI_EXT_CAP_ID_VNDR))) {
1597 pci_read_config_dword(dev, vsec + PCI_VNDR_HEADER, &header);
1599 /* Is the device part of a Thunderbolt controller? */
1600 if (dev->vendor == PCI_VENDOR_ID_INTEL &&
1601 PCI_VNDR_HEADER_ID(header) == PCI_VSEC_ID_INTEL_TBT) {
1602 dev->is_thunderbolt = 1;
1608 static void set_pcie_untrusted(struct pci_dev *dev)
1610 struct pci_dev *parent;
1613 * If the upstream bridge is untrusted we treat this device
1614 * untrusted as well.
1616 parent = pci_upstream_bridge(dev);
1617 if (parent && (parent->untrusted || parent->external_facing))
1618 dev->untrusted = true;
1621 static void pci_set_removable(struct pci_dev *dev)
1623 struct pci_dev *parent = pci_upstream_bridge(dev);
1626 * We (only) consider everything downstream from an external_facing
1627 * device to be removable by the user. We're mainly concerned with
1628 * consumer platforms with user accessible thunderbolt ports that are
1629 * vulnerable to DMA attacks, and we expect those ports to be marked by
1630 * the firmware as external_facing. Devices in traditional hotplug
1631 * slots can technically be removed, but the expectation is that unless
1632 * the port is marked with external_facing, such devices are less
1633 * accessible to user / may not be removed by end user, and thus not
1634 * exposed as "removable" to userspace.
1637 (parent->external_facing || dev_is_removable(&parent->dev)))
1638 dev_set_removable(&dev->dev, DEVICE_REMOVABLE);
1642 * pci_ext_cfg_is_aliased - Is ext config space just an alias of std config?
1645 * PCI Express to PCI/PCI-X Bridge Specification, rev 1.0, 4.1.4 says that
1646 * when forwarding a type1 configuration request the bridge must check that
1647 * the extended register address field is zero. The bridge is not permitted
1648 * to forward the transactions and must handle it as an Unsupported Request.
1649 * Some bridges do not follow this rule and simply drop the extended register
1650 * bits, resulting in the standard config space being aliased, every 256
1651 * bytes across the entire configuration space. Test for this condition by
1652 * comparing the first dword of each potential alias to the vendor/device ID.
1654 * ASM1083/1085 PCIe-to-PCI Reversible Bridge (1b21:1080, rev 01 & 03)
1655 * AMD/ATI SBx00 PCI to PCI Bridge (1002:4384, rev 40)
1657 static bool pci_ext_cfg_is_aliased(struct pci_dev *dev)
1659 #ifdef CONFIG_PCI_QUIRKS
1663 pci_read_config_dword(dev, PCI_VENDOR_ID, &header);
1665 for (pos = PCI_CFG_SPACE_SIZE;
1666 pos < PCI_CFG_SPACE_EXP_SIZE; pos += PCI_CFG_SPACE_SIZE) {
1667 if (pci_read_config_dword(dev, pos, &tmp) != PCIBIOS_SUCCESSFUL
1679 * pci_cfg_space_size_ext - Get the configuration space size of the PCI device
1682 * Regular PCI devices have 256 bytes, but PCI-X 2 and PCI Express devices
1683 * have 4096 bytes. Even if the device is capable, that doesn't mean we can
1684 * access it. Maybe we don't have a way to generate extended config space
1685 * accesses, or the device is behind a reverse Express bridge. So we try
1686 * reading the dword at 0x100 which must either be 0 or a valid extended
1687 * capability header.
1689 static int pci_cfg_space_size_ext(struct pci_dev *dev)
1692 int pos = PCI_CFG_SPACE_SIZE;
1694 if (pci_read_config_dword(dev, pos, &status) != PCIBIOS_SUCCESSFUL)
1695 return PCI_CFG_SPACE_SIZE;
1696 if (status == 0xffffffff || pci_ext_cfg_is_aliased(dev))
1697 return PCI_CFG_SPACE_SIZE;
1699 return PCI_CFG_SPACE_EXP_SIZE;
1702 int pci_cfg_space_size(struct pci_dev *dev)
1708 #ifdef CONFIG_PCI_IOV
1710 * Per the SR-IOV specification (rev 1.1, sec 3.5), VFs are required to
1711 * implement a PCIe capability and therefore must implement extended
1712 * config space. We can skip the NO_EXTCFG test below and the
1713 * reachability/aliasing test in pci_cfg_space_size_ext() by virtue of
1714 * the fact that the SR-IOV capability on the PF resides in extended
1715 * config space and must be accessible and non-aliased to have enabled
1716 * support for this VF. This is a micro performance optimization for
1717 * systems supporting many VFs.
1720 return PCI_CFG_SPACE_EXP_SIZE;
1723 if (dev->bus->bus_flags & PCI_BUS_FLAGS_NO_EXTCFG)
1724 return PCI_CFG_SPACE_SIZE;
1726 class = dev->class >> 8;
1727 if (class == PCI_CLASS_BRIDGE_HOST)
1728 return pci_cfg_space_size_ext(dev);
1730 if (pci_is_pcie(dev))
1731 return pci_cfg_space_size_ext(dev);
1733 pos = pci_find_capability(dev, PCI_CAP_ID_PCIX);
1735 return PCI_CFG_SPACE_SIZE;
1737 pci_read_config_dword(dev, pos + PCI_X_STATUS, &status);
1738 if (status & (PCI_X_STATUS_266MHZ | PCI_X_STATUS_533MHZ))
1739 return pci_cfg_space_size_ext(dev);
1741 return PCI_CFG_SPACE_SIZE;
1744 static u32 pci_class(struct pci_dev *dev)
1748 #ifdef CONFIG_PCI_IOV
1750 return dev->physfn->sriov->class;
1752 pci_read_config_dword(dev, PCI_CLASS_REVISION, &class);
1756 static void pci_subsystem_ids(struct pci_dev *dev, u16 *vendor, u16 *device)
1758 #ifdef CONFIG_PCI_IOV
1759 if (dev->is_virtfn) {
1760 *vendor = dev->physfn->sriov->subsystem_vendor;
1761 *device = dev->physfn->sriov->subsystem_device;
1765 pci_read_config_word(dev, PCI_SUBSYSTEM_VENDOR_ID, vendor);
1766 pci_read_config_word(dev, PCI_SUBSYSTEM_ID, device);
1769 static u8 pci_hdr_type(struct pci_dev *dev)
1773 #ifdef CONFIG_PCI_IOV
1775 return dev->physfn->sriov->hdr_type;
1777 pci_read_config_byte(dev, PCI_HEADER_TYPE, &hdr_type);
1781 #define LEGACY_IO_RESOURCE (IORESOURCE_IO | IORESOURCE_PCI_FIXED)
1784 * pci_intx_mask_broken - Test PCI_COMMAND_INTX_DISABLE writability
1787 * Test whether PCI_COMMAND_INTX_DISABLE is writable for @dev. Check this
1788 * at enumeration-time to avoid modifying PCI_COMMAND at run-time.
1790 static int pci_intx_mask_broken(struct pci_dev *dev)
1792 u16 orig, toggle, new;
1794 pci_read_config_word(dev, PCI_COMMAND, &orig);
1795 toggle = orig ^ PCI_COMMAND_INTX_DISABLE;
1796 pci_write_config_word(dev, PCI_COMMAND, toggle);
1797 pci_read_config_word(dev, PCI_COMMAND, &new);
1799 pci_write_config_word(dev, PCI_COMMAND, orig);
1802 * PCI_COMMAND_INTX_DISABLE was reserved and read-only prior to PCI
1803 * r2.3, so strictly speaking, a device is not *broken* if it's not
1804 * writable. But we'll live with the misnomer for now.
1811 static void early_dump_pci_device(struct pci_dev *pdev)
1816 pci_info(pdev, "config space:\n");
1818 for (i = 0; i < 256; i += 4)
1819 pci_read_config_dword(pdev, i, &value[i / 4]);
1821 print_hex_dump(KERN_INFO, "", DUMP_PREFIX_OFFSET, 16, 1,
1826 * pci_setup_device - Fill in class and map information of a device
1827 * @dev: the device structure to fill
1829 * Initialize the device structure with information about the device's
1830 * vendor,class,memory and IO-space addresses, IRQ lines etc.
1831 * Called at initialisation of the PCI subsystem and by CardBus services.
1832 * Returns 0 on success and negative if unknown type of device (not normal,
1833 * bridge or CardBus).
1835 int pci_setup_device(struct pci_dev *dev)
1841 struct pci_bus_region region;
1842 struct resource *res;
1844 hdr_type = pci_hdr_type(dev);
1846 dev->sysdata = dev->bus->sysdata;
1847 dev->dev.parent = dev->bus->bridge;
1848 dev->dev.bus = &pci_bus_type;
1849 dev->hdr_type = hdr_type & 0x7f;
1850 dev->multifunction = !!(hdr_type & 0x80);
1851 dev->error_state = pci_channel_io_normal;
1852 set_pcie_port_type(dev);
1854 pci_dev_assign_slot(dev);
1857 * Assume 32-bit PCI; let 64-bit PCI cards (which are far rarer)
1858 * set this higher, assuming the system even supports it.
1860 dev->dma_mask = 0xffffffff;
1862 dev_set_name(&dev->dev, "%04x:%02x:%02x.%d", pci_domain_nr(dev->bus),
1863 dev->bus->number, PCI_SLOT(dev->devfn),
1864 PCI_FUNC(dev->devfn));
1866 class = pci_class(dev);
1868 dev->revision = class & 0xff;
1869 dev->class = class >> 8; /* upper 3 bytes */
1872 early_dump_pci_device(dev);
1874 /* Need to have dev->class ready */
1875 dev->cfg_size = pci_cfg_space_size(dev);
1877 /* Need to have dev->cfg_size ready */
1878 set_pcie_thunderbolt(dev);
1880 set_pcie_untrusted(dev);
1882 /* "Unknown power state" */
1883 dev->current_state = PCI_UNKNOWN;
1885 /* Early fixups, before probing the BARs */
1886 pci_fixup_device(pci_fixup_early, dev);
1888 pci_set_removable(dev);
1890 pci_info(dev, "[%04x:%04x] type %02x class %#08x\n",
1891 dev->vendor, dev->device, dev->hdr_type, dev->class);
1893 /* Device class may be changed after fixup */
1894 class = dev->class >> 8;
1896 if (dev->non_compliant_bars && !dev->mmio_always_on) {
1897 pci_read_config_word(dev, PCI_COMMAND, &cmd);
1898 if (cmd & (PCI_COMMAND_IO | PCI_COMMAND_MEMORY)) {
1899 pci_info(dev, "device has non-compliant BARs; disabling IO/MEM decoding\n");
1900 cmd &= ~PCI_COMMAND_IO;
1901 cmd &= ~PCI_COMMAND_MEMORY;
1902 pci_write_config_word(dev, PCI_COMMAND, cmd);
1906 dev->broken_intx_masking = pci_intx_mask_broken(dev);
1908 switch (dev->hdr_type) { /* header type */
1909 case PCI_HEADER_TYPE_NORMAL: /* standard header */
1910 if (class == PCI_CLASS_BRIDGE_PCI)
1913 pci_read_bases(dev, 6, PCI_ROM_ADDRESS);
1915 pci_subsystem_ids(dev, &dev->subsystem_vendor, &dev->subsystem_device);
1918 * Do the ugly legacy mode stuff here rather than broken chip
1919 * quirk code. Legacy mode ATA controllers have fixed
1920 * addresses. These are not always echoed in BAR0-3, and
1921 * BAR0-3 in a few cases contain junk!
1923 if (class == PCI_CLASS_STORAGE_IDE) {
1925 pci_read_config_byte(dev, PCI_CLASS_PROG, &progif);
1926 if ((progif & 1) == 0) {
1927 region.start = 0x1F0;
1929 res = &dev->resource[0];
1930 res->flags = LEGACY_IO_RESOURCE;
1931 pcibios_bus_to_resource(dev->bus, res, ®ion);
1932 pci_info(dev, "legacy IDE quirk: reg 0x10: %pR\n",
1934 region.start = 0x3F6;
1936 res = &dev->resource[1];
1937 res->flags = LEGACY_IO_RESOURCE;
1938 pcibios_bus_to_resource(dev->bus, res, ®ion);
1939 pci_info(dev, "legacy IDE quirk: reg 0x14: %pR\n",
1942 if ((progif & 4) == 0) {
1943 region.start = 0x170;
1945 res = &dev->resource[2];
1946 res->flags = LEGACY_IO_RESOURCE;
1947 pcibios_bus_to_resource(dev->bus, res, ®ion);
1948 pci_info(dev, "legacy IDE quirk: reg 0x18: %pR\n",
1950 region.start = 0x376;
1952 res = &dev->resource[3];
1953 res->flags = LEGACY_IO_RESOURCE;
1954 pcibios_bus_to_resource(dev->bus, res, ®ion);
1955 pci_info(dev, "legacy IDE quirk: reg 0x1c: %pR\n",
1961 case PCI_HEADER_TYPE_BRIDGE: /* bridge header */
1963 * The PCI-to-PCI bridge spec requires that subtractive
1964 * decoding (i.e. transparent) bridge must have programming
1965 * interface code of 0x01.
1968 dev->transparent = ((dev->class & 0xff) == 1);
1969 pci_read_bases(dev, 2, PCI_ROM_ADDRESS1);
1970 pci_read_bridge_windows(dev);
1971 set_pcie_hotplug_bridge(dev);
1972 pos = pci_find_capability(dev, PCI_CAP_ID_SSVID);
1974 pci_read_config_word(dev, pos + PCI_SSVID_VENDOR_ID, &dev->subsystem_vendor);
1975 pci_read_config_word(dev, pos + PCI_SSVID_DEVICE_ID, &dev->subsystem_device);
1979 case PCI_HEADER_TYPE_CARDBUS: /* CardBus bridge header */
1980 if (class != PCI_CLASS_BRIDGE_CARDBUS)
1983 pci_read_bases(dev, 1, 0);
1984 pci_read_config_word(dev, PCI_CB_SUBSYSTEM_VENDOR_ID, &dev->subsystem_vendor);
1985 pci_read_config_word(dev, PCI_CB_SUBSYSTEM_ID, &dev->subsystem_device);
1988 default: /* unknown header */
1989 pci_err(dev, "unknown header type %02x, ignoring device\n",
1994 pci_err(dev, "ignoring class %#08x (doesn't match header type %02x)\n",
1995 dev->class, dev->hdr_type);
1996 dev->class = PCI_CLASS_NOT_DEFINED << 8;
1999 /* We found a fine healthy device, go go go... */
2003 static void pci_configure_mps(struct pci_dev *dev)
2005 struct pci_dev *bridge = pci_upstream_bridge(dev);
2006 int mps, mpss, p_mps, rc;
2008 if (!pci_is_pcie(dev))
2011 /* MPS and MRRS fields are of type 'RsvdP' for VFs, short-circuit out */
2016 * For Root Complex Integrated Endpoints, program the maximum
2017 * supported value unless limited by the PCIE_BUS_PEER2PEER case.
2019 if (pci_pcie_type(dev) == PCI_EXP_TYPE_RC_END) {
2020 if (pcie_bus_config == PCIE_BUS_PEER2PEER)
2023 mps = 128 << dev->pcie_mpss;
2024 rc = pcie_set_mps(dev, mps);
2026 pci_warn(dev, "can't set Max Payload Size to %d; if necessary, use \"pci=pcie_bus_safe\" and report a bug\n",
2032 if (!bridge || !pci_is_pcie(bridge))
2035 mps = pcie_get_mps(dev);
2036 p_mps = pcie_get_mps(bridge);
2041 if (pcie_bus_config == PCIE_BUS_TUNE_OFF) {
2042 pci_warn(dev, "Max Payload Size %d, but upstream %s set to %d; if necessary, use \"pci=pcie_bus_safe\" and report a bug\n",
2043 mps, pci_name(bridge), p_mps);
2048 * Fancier MPS configuration is done later by
2049 * pcie_bus_configure_settings()
2051 if (pcie_bus_config != PCIE_BUS_DEFAULT)
2054 mpss = 128 << dev->pcie_mpss;
2055 if (mpss < p_mps && pci_pcie_type(bridge) == PCI_EXP_TYPE_ROOT_PORT) {
2056 pcie_set_mps(bridge, mpss);
2057 pci_info(dev, "Upstream bridge's Max Payload Size set to %d (was %d, max %d)\n",
2058 mpss, p_mps, 128 << bridge->pcie_mpss);
2059 p_mps = pcie_get_mps(bridge);
2062 rc = pcie_set_mps(dev, p_mps);
2064 pci_warn(dev, "can't set Max Payload Size to %d; if necessary, use \"pci=pcie_bus_safe\" and report a bug\n",
2069 pci_info(dev, "Max Payload Size set to %d (was %d, max %d)\n",
2073 int pci_configure_extended_tags(struct pci_dev *dev, void *ign)
2075 struct pci_host_bridge *host;
2080 if (!pci_is_pcie(dev))
2083 ret = pcie_capability_read_dword(dev, PCI_EXP_DEVCAP, &cap);
2087 if (!(cap & PCI_EXP_DEVCAP_EXT_TAG))
2090 ret = pcie_capability_read_word(dev, PCI_EXP_DEVCTL, &ctl);
2094 host = pci_find_host_bridge(dev->bus);
2099 * If some device in the hierarchy doesn't handle Extended Tags
2100 * correctly, make sure they're disabled.
2102 if (host->no_ext_tags) {
2103 if (ctl & PCI_EXP_DEVCTL_EXT_TAG) {
2104 pci_info(dev, "disabling Extended Tags\n");
2105 pcie_capability_clear_word(dev, PCI_EXP_DEVCTL,
2106 PCI_EXP_DEVCTL_EXT_TAG);
2111 if (!(ctl & PCI_EXP_DEVCTL_EXT_TAG)) {
2112 pci_info(dev, "enabling Extended Tags\n");
2113 pcie_capability_set_word(dev, PCI_EXP_DEVCTL,
2114 PCI_EXP_DEVCTL_EXT_TAG);
2120 * pcie_relaxed_ordering_enabled - Probe for PCIe relaxed ordering enable
2121 * @dev: PCI device to query
2123 * Returns true if the device has enabled relaxed ordering attribute.
2125 bool pcie_relaxed_ordering_enabled(struct pci_dev *dev)
2129 pcie_capability_read_word(dev, PCI_EXP_DEVCTL, &v);
2131 return !!(v & PCI_EXP_DEVCTL_RELAX_EN);
2133 EXPORT_SYMBOL(pcie_relaxed_ordering_enabled);
2135 static void pci_configure_relaxed_ordering(struct pci_dev *dev)
2137 struct pci_dev *root;
2139 /* PCI_EXP_DEVICE_RELAX_EN is RsvdP in VFs */
2143 if (!pcie_relaxed_ordering_enabled(dev))
2147 * For now, we only deal with Relaxed Ordering issues with Root
2148 * Ports. Peer-to-Peer DMA is another can of worms.
2150 root = pcie_find_root_port(dev);
2154 if (root->dev_flags & PCI_DEV_FLAGS_NO_RELAXED_ORDERING) {
2155 pcie_capability_clear_word(dev, PCI_EXP_DEVCTL,
2156 PCI_EXP_DEVCTL_RELAX_EN);
2157 pci_info(dev, "Relaxed Ordering disabled because the Root Port didn't support it\n");
2161 static void pci_configure_ltr(struct pci_dev *dev)
2163 #ifdef CONFIG_PCIEASPM
2164 struct pci_host_bridge *host = pci_find_host_bridge(dev->bus);
2165 struct pci_dev *bridge;
2168 if (!pci_is_pcie(dev))
2171 /* Read L1 PM substate capabilities */
2172 dev->l1ss = pci_find_ext_capability(dev, PCI_EXT_CAP_ID_L1SS);
2174 pcie_capability_read_dword(dev, PCI_EXP_DEVCAP2, &cap);
2175 if (!(cap & PCI_EXP_DEVCAP2_LTR))
2178 pcie_capability_read_dword(dev, PCI_EXP_DEVCTL2, &ctl);
2179 if (ctl & PCI_EXP_DEVCTL2_LTR_EN) {
2180 if (pci_pcie_type(dev) == PCI_EXP_TYPE_ROOT_PORT) {
2185 bridge = pci_upstream_bridge(dev);
2186 if (bridge && bridge->ltr_path)
2192 if (!host->native_ltr)
2196 * Software must not enable LTR in an Endpoint unless the Root
2197 * Complex and all intermediate Switches indicate support for LTR.
2198 * PCIe r4.0, sec 6.18.
2200 if (pci_pcie_type(dev) == PCI_EXP_TYPE_ROOT_PORT ||
2201 ((bridge = pci_upstream_bridge(dev)) &&
2202 bridge->ltr_path)) {
2203 pcie_capability_set_word(dev, PCI_EXP_DEVCTL2,
2204 PCI_EXP_DEVCTL2_LTR_EN);
2210 static void pci_configure_eetlp_prefix(struct pci_dev *dev)
2212 #ifdef CONFIG_PCI_PASID
2213 struct pci_dev *bridge;
2217 if (!pci_is_pcie(dev))
2220 pcie_capability_read_dword(dev, PCI_EXP_DEVCAP2, &cap);
2221 if (!(cap & PCI_EXP_DEVCAP2_EE_PREFIX))
2224 pcie_type = pci_pcie_type(dev);
2225 if (pcie_type == PCI_EXP_TYPE_ROOT_PORT ||
2226 pcie_type == PCI_EXP_TYPE_RC_END)
2227 dev->eetlp_prefix_path = 1;
2229 bridge = pci_upstream_bridge(dev);
2230 if (bridge && bridge->eetlp_prefix_path)
2231 dev->eetlp_prefix_path = 1;
2236 static void pci_configure_serr(struct pci_dev *dev)
2240 if (dev->hdr_type == PCI_HEADER_TYPE_BRIDGE) {
2243 * A bridge will not forward ERR_ messages coming from an
2244 * endpoint unless SERR# forwarding is enabled.
2246 pci_read_config_word(dev, PCI_BRIDGE_CONTROL, &control);
2247 if (!(control & PCI_BRIDGE_CTL_SERR)) {
2248 control |= PCI_BRIDGE_CTL_SERR;
2249 pci_write_config_word(dev, PCI_BRIDGE_CONTROL, control);
2254 static void pci_configure_device(struct pci_dev *dev)
2256 pci_configure_mps(dev);
2257 pci_configure_extended_tags(dev, NULL);
2258 pci_configure_relaxed_ordering(dev);
2259 pci_configure_ltr(dev);
2260 pci_configure_eetlp_prefix(dev);
2261 pci_configure_serr(dev);
2263 pci_acpi_program_hp_params(dev);
2266 static void pci_release_capabilities(struct pci_dev *dev)
2270 pci_vpd_release(dev);
2271 pci_iov_release(dev);
2272 pci_free_cap_save_buffers(dev);
2276 * pci_release_dev - Free a PCI device structure when all users of it are
2278 * @dev: device that's been disconnected
2280 * Will be called only by the device core when all users of this PCI device are
2283 static void pci_release_dev(struct device *dev)
2285 struct pci_dev *pci_dev;
2287 pci_dev = to_pci_dev(dev);
2288 pci_release_capabilities(pci_dev);
2289 pci_release_of_node(pci_dev);
2290 pcibios_release_device(pci_dev);
2291 pci_bus_put(pci_dev->bus);
2292 kfree(pci_dev->driver_override);
2293 bitmap_free(pci_dev->dma_alias_mask);
2294 dev_dbg(dev, "device released\n");
2298 struct pci_dev *pci_alloc_dev(struct pci_bus *bus)
2300 struct pci_dev *dev;
2302 dev = kzalloc(sizeof(struct pci_dev), GFP_KERNEL);
2306 INIT_LIST_HEAD(&dev->bus_list);
2307 dev->dev.type = &pci_dev_type;
2308 dev->bus = pci_bus_get(bus);
2312 EXPORT_SYMBOL(pci_alloc_dev);
2314 static bool pci_bus_crs_vendor_id(u32 l)
2316 return (l & 0xffff) == 0x0001;
2319 static bool pci_bus_wait_crs(struct pci_bus *bus, int devfn, u32 *l,
2324 if (!pci_bus_crs_vendor_id(*l))
2325 return true; /* not a CRS completion */
2328 return false; /* CRS, but caller doesn't want to wait */
2331 * We got the reserved Vendor ID that indicates a completion with
2332 * Configuration Request Retry Status (CRS). Retry until we get a
2333 * valid Vendor ID or we time out.
2335 while (pci_bus_crs_vendor_id(*l)) {
2336 if (delay > timeout) {
2337 pr_warn("pci %04x:%02x:%02x.%d: not ready after %dms; giving up\n",
2338 pci_domain_nr(bus), bus->number,
2339 PCI_SLOT(devfn), PCI_FUNC(devfn), delay - 1);
2344 pr_info("pci %04x:%02x:%02x.%d: not ready after %dms; waiting\n",
2345 pci_domain_nr(bus), bus->number,
2346 PCI_SLOT(devfn), PCI_FUNC(devfn), delay - 1);
2351 if (pci_bus_read_config_dword(bus, devfn, PCI_VENDOR_ID, l))
2356 pr_info("pci %04x:%02x:%02x.%d: ready after %dms\n",
2357 pci_domain_nr(bus), bus->number,
2358 PCI_SLOT(devfn), PCI_FUNC(devfn), delay - 1);
2363 bool pci_bus_generic_read_dev_vendor_id(struct pci_bus *bus, int devfn, u32 *l,
2366 if (pci_bus_read_config_dword(bus, devfn, PCI_VENDOR_ID, l))
2369 /* Some broken boards return 0 or ~0 if a slot is empty: */
2370 if (*l == 0xffffffff || *l == 0x00000000 ||
2371 *l == 0x0000ffff || *l == 0xffff0000)
2374 if (pci_bus_crs_vendor_id(*l))
2375 return pci_bus_wait_crs(bus, devfn, l, timeout);
2380 bool pci_bus_read_dev_vendor_id(struct pci_bus *bus, int devfn, u32 *l,
2383 #ifdef CONFIG_PCI_QUIRKS
2384 struct pci_dev *bridge = bus->self;
2387 * Certain IDT switches have an issue where they improperly trigger
2388 * ACS Source Validation errors on completions for config reads.
2390 if (bridge && bridge->vendor == PCI_VENDOR_ID_IDT &&
2391 bridge->device == 0x80b5)
2392 return pci_idt_bus_quirk(bus, devfn, l, timeout);
2395 return pci_bus_generic_read_dev_vendor_id(bus, devfn, l, timeout);
2397 EXPORT_SYMBOL(pci_bus_read_dev_vendor_id);
2400 * Read the config data for a PCI device, sanity-check it,
2401 * and fill in the dev structure.
2403 static struct pci_dev *pci_scan_device(struct pci_bus *bus, int devfn)
2405 struct pci_dev *dev;
2408 if (!pci_bus_read_dev_vendor_id(bus, devfn, &l, 60*1000))
2411 dev = pci_alloc_dev(bus);
2416 dev->vendor = l & 0xffff;
2417 dev->device = (l >> 16) & 0xffff;
2419 pci_set_of_node(dev);
2421 if (pci_setup_device(dev)) {
2422 pci_release_of_node(dev);
2423 pci_bus_put(dev->bus);
2431 void pcie_report_downtraining(struct pci_dev *dev)
2433 if (!pci_is_pcie(dev))
2436 /* Look from the device up to avoid downstream ports with no devices */
2437 if ((pci_pcie_type(dev) != PCI_EXP_TYPE_ENDPOINT) &&
2438 (pci_pcie_type(dev) != PCI_EXP_TYPE_LEG_END) &&
2439 (pci_pcie_type(dev) != PCI_EXP_TYPE_UPSTREAM))
2442 /* Multi-function PCIe devices share the same link/status */
2443 if (PCI_FUNC(dev->devfn) != 0 || dev->is_virtfn)
2446 /* Print link status only if the device is constrained by the fabric */
2447 __pcie_print_link_status(dev, false);
2450 static void pci_init_capabilities(struct pci_dev *dev)
2452 pci_ea_init(dev); /* Enhanced Allocation */
2453 pci_msi_init(dev); /* Disable MSI */
2454 pci_msix_init(dev); /* Disable MSI-X */
2456 /* Buffers for saving PCIe and PCI-X capabilities */
2457 pci_allocate_cap_save_buffers(dev);
2459 pci_pm_init(dev); /* Power Management */
2460 pci_vpd_init(dev); /* Vital Product Data */
2461 pci_configure_ari(dev); /* Alternative Routing-ID Forwarding */
2462 pci_iov_init(dev); /* Single Root I/O Virtualization */
2463 pci_ats_init(dev); /* Address Translation Services */
2464 pci_pri_init(dev); /* Page Request Interface */
2465 pci_pasid_init(dev); /* Process Address Space ID */
2466 pci_acs_init(dev); /* Access Control Services */
2467 pci_ptm_init(dev); /* Precision Time Measurement */
2468 pci_aer_init(dev); /* Advanced Error Reporting */
2469 pci_dpc_init(dev); /* Downstream Port Containment */
2470 pci_rcec_init(dev); /* Root Complex Event Collector */
2472 pcie_report_downtraining(dev);
2474 if (pci_probe_reset_function(dev) == 0)
2479 * This is the equivalent of pci_host_bridge_msi_domain() that acts on
2480 * devices. Firmware interfaces that can select the MSI domain on a
2481 * per-device basis should be called from here.
2483 static struct irq_domain *pci_dev_msi_domain(struct pci_dev *dev)
2485 struct irq_domain *d;
2488 * If a domain has been set through the pcibios_add_device()
2489 * callback, then this is the one (platform code knows best).
2491 d = dev_get_msi_domain(&dev->dev);
2496 * Let's see if we have a firmware interface able to provide
2499 d = pci_msi_get_device_domain(dev);
2506 static void pci_set_msi_domain(struct pci_dev *dev)
2508 struct irq_domain *d;
2511 * If the platform or firmware interfaces cannot supply a
2512 * device-specific MSI domain, then inherit the default domain
2513 * from the host bridge itself.
2515 d = pci_dev_msi_domain(dev);
2517 d = dev_get_msi_domain(&dev->bus->dev);
2519 dev_set_msi_domain(&dev->dev, d);
2522 void pci_device_add(struct pci_dev *dev, struct pci_bus *bus)
2526 pci_configure_device(dev);
2528 device_initialize(&dev->dev);
2529 dev->dev.release = pci_release_dev;
2531 set_dev_node(&dev->dev, pcibus_to_node(bus));
2532 dev->dev.dma_mask = &dev->dma_mask;
2533 dev->dev.dma_parms = &dev->dma_parms;
2534 dev->dev.coherent_dma_mask = 0xffffffffull;
2536 dma_set_max_seg_size(&dev->dev, 65536);
2537 dma_set_seg_boundary(&dev->dev, 0xffffffff);
2539 /* Fix up broken headers */
2540 pci_fixup_device(pci_fixup_header, dev);
2542 pci_reassigndev_resource_alignment(dev);
2544 dev->state_saved = false;
2546 pci_init_capabilities(dev);
2549 * Add the device to our list of discovered devices
2550 * and the bus list for fixup functions, etc.
2552 down_write(&pci_bus_sem);
2553 list_add_tail(&dev->bus_list, &bus->devices);
2554 up_write(&pci_bus_sem);
2556 ret = pcibios_add_device(dev);
2559 /* Set up MSI IRQ domain */
2560 pci_set_msi_domain(dev);
2562 /* Notifier could use PCI capabilities */
2563 dev->match_driver = false;
2564 ret = device_add(&dev->dev);
2568 struct pci_dev *pci_scan_single_device(struct pci_bus *bus, int devfn)
2570 struct pci_dev *dev;
2572 dev = pci_get_slot(bus, devfn);
2578 dev = pci_scan_device(bus, devfn);
2582 pci_device_add(dev, bus);
2586 EXPORT_SYMBOL(pci_scan_single_device);
2588 static unsigned next_fn(struct pci_bus *bus, struct pci_dev *dev, unsigned fn)
2594 if (pci_ari_enabled(bus)) {
2597 pos = pci_find_ext_capability(dev, PCI_EXT_CAP_ID_ARI);
2601 pci_read_config_word(dev, pos + PCI_ARI_CAP, &cap);
2602 next_fn = PCI_ARI_CAP_NFN(cap);
2604 return 0; /* protect against malformed list */
2609 /* dev may be NULL for non-contiguous multifunction devices */
2610 if (!dev || dev->multifunction)
2611 return (fn + 1) % 8;
2616 static int only_one_child(struct pci_bus *bus)
2618 struct pci_dev *bridge = bus->self;
2621 * Systems with unusual topologies set PCI_SCAN_ALL_PCIE_DEVS so
2622 * we scan for all possible devices, not just Device 0.
2624 if (pci_has_flag(PCI_SCAN_ALL_PCIE_DEVS))
2628 * A PCIe Downstream Port normally leads to a Link with only Device
2629 * 0 on it (PCIe spec r3.1, sec 7.3.1). As an optimization, scan
2630 * only for Device 0 in that situation.
2632 if (bridge && pci_is_pcie(bridge) && pcie_downstream_port(bridge))
2639 * pci_scan_slot - Scan a PCI slot on a bus for devices
2640 * @bus: PCI bus to scan
2641 * @devfn: slot number to scan (must have zero function)
2643 * Scan a PCI slot on the specified PCI bus for devices, adding
2644 * discovered devices to the @bus->devices list. New devices
2645 * will not have is_added set.
2647 * Returns the number of new devices found.
2649 int pci_scan_slot(struct pci_bus *bus, int devfn)
2651 unsigned fn, nr = 0;
2652 struct pci_dev *dev;
2654 if (only_one_child(bus) && (devfn > 0))
2655 return 0; /* Already scanned the entire slot */
2657 dev = pci_scan_single_device(bus, devfn);
2660 if (!pci_dev_is_added(dev))
2663 for (fn = next_fn(bus, dev, 0); fn > 0; fn = next_fn(bus, dev, fn)) {
2664 dev = pci_scan_single_device(bus, devfn + fn);
2666 if (!pci_dev_is_added(dev))
2668 dev->multifunction = 1;
2672 /* Only one slot has PCIe device */
2673 if (bus->self && nr)
2674 pcie_aspm_init_link_state(bus->self);
2678 EXPORT_SYMBOL(pci_scan_slot);
2680 static int pcie_find_smpss(struct pci_dev *dev, void *data)
2684 if (!pci_is_pcie(dev))
2688 * We don't have a way to change MPS settings on devices that have
2689 * drivers attached. A hot-added device might support only the minimum
2690 * MPS setting (MPS=128). Therefore, if the fabric contains a bridge
2691 * where devices may be hot-added, we limit the fabric MPS to 128 so
2692 * hot-added devices will work correctly.
2694 * However, if we hot-add a device to a slot directly below a Root
2695 * Port, it's impossible for there to be other existing devices below
2696 * the port. We don't limit the MPS in this case because we can
2697 * reconfigure MPS on both the Root Port and the hot-added device,
2698 * and there are no other devices involved.
2700 * Note that this PCIE_BUS_SAFE path assumes no peer-to-peer DMA.
2702 if (dev->is_hotplug_bridge &&
2703 pci_pcie_type(dev) != PCI_EXP_TYPE_ROOT_PORT)
2706 if (*smpss > dev->pcie_mpss)
2707 *smpss = dev->pcie_mpss;
2712 static void pcie_write_mps(struct pci_dev *dev, int mps)
2716 if (pcie_bus_config == PCIE_BUS_PERFORMANCE) {
2717 mps = 128 << dev->pcie_mpss;
2719 if (pci_pcie_type(dev) != PCI_EXP_TYPE_ROOT_PORT &&
2723 * For "Performance", the assumption is made that
2724 * downstream communication will never be larger than
2725 * the MRRS. So, the MPS only needs to be configured
2726 * for the upstream communication. This being the case,
2727 * walk from the top down and set the MPS of the child
2728 * to that of the parent bus.
2730 * Configure the device MPS with the smaller of the
2731 * device MPSS or the bridge MPS (which is assumed to be
2732 * properly configured at this point to the largest
2733 * allowable MPS based on its parent bus).
2735 mps = min(mps, pcie_get_mps(dev->bus->self));
2738 rc = pcie_set_mps(dev, mps);
2740 pci_err(dev, "Failed attempting to set the MPS\n");
2743 static void pcie_write_mrrs(struct pci_dev *dev)
2748 * In the "safe" case, do not configure the MRRS. There appear to be
2749 * issues with setting MRRS to 0 on a number of devices.
2751 if (pcie_bus_config != PCIE_BUS_PERFORMANCE)
2755 * For max performance, the MRRS must be set to the largest supported
2756 * value. However, it cannot be configured larger than the MPS the
2757 * device or the bus can support. This should already be properly
2758 * configured by a prior call to pcie_write_mps().
2760 mrrs = pcie_get_mps(dev);
2763 * MRRS is a R/W register. Invalid values can be written, but a
2764 * subsequent read will verify if the value is acceptable or not.
2765 * If the MRRS value provided is not acceptable (e.g., too large),
2766 * shrink the value until it is acceptable to the HW.
2768 while (mrrs != pcie_get_readrq(dev) && mrrs >= 128) {
2769 rc = pcie_set_readrq(dev, mrrs);
2773 pci_warn(dev, "Failed attempting to set the MRRS\n");
2778 pci_err(dev, "MRRS was unable to be configured with a safe value. If problems are experienced, try running with pci=pcie_bus_safe\n");
2781 static int pcie_bus_configure_set(struct pci_dev *dev, void *data)
2785 if (!pci_is_pcie(dev))
2788 if (pcie_bus_config == PCIE_BUS_TUNE_OFF ||
2789 pcie_bus_config == PCIE_BUS_DEFAULT)
2792 mps = 128 << *(u8 *)data;
2793 orig_mps = pcie_get_mps(dev);
2795 pcie_write_mps(dev, mps);
2796 pcie_write_mrrs(dev);
2798 pci_info(dev, "Max Payload Size set to %4d/%4d (was %4d), Max Read Rq %4d\n",
2799 pcie_get_mps(dev), 128 << dev->pcie_mpss,
2800 orig_mps, pcie_get_readrq(dev));
2806 * pcie_bus_configure_settings() requires that pci_walk_bus work in a top-down,
2807 * parents then children fashion. If this changes, then this code will not
2810 void pcie_bus_configure_settings(struct pci_bus *bus)
2817 if (!pci_is_pcie(bus->self))
2821 * FIXME - Peer to peer DMA is possible, though the endpoint would need
2822 * to be aware of the MPS of the destination. To work around this,
2823 * simply force the MPS of the entire system to the smallest possible.
2825 if (pcie_bus_config == PCIE_BUS_PEER2PEER)
2828 if (pcie_bus_config == PCIE_BUS_SAFE) {
2829 smpss = bus->self->pcie_mpss;
2831 pcie_find_smpss(bus->self, &smpss);
2832 pci_walk_bus(bus, pcie_find_smpss, &smpss);
2835 pcie_bus_configure_set(bus->self, &smpss);
2836 pci_walk_bus(bus, pcie_bus_configure_set, &smpss);
2838 EXPORT_SYMBOL_GPL(pcie_bus_configure_settings);
2841 * Called after each bus is probed, but before its children are examined. This
2842 * is marked as __weak because multiple architectures define it.
2844 void __weak pcibios_fixup_bus(struct pci_bus *bus)
2846 /* nothing to do, expected to be removed in the future */
2850 * pci_scan_child_bus_extend() - Scan devices below a bus
2851 * @bus: Bus to scan for devices
2852 * @available_buses: Total number of buses available (%0 does not try to
2853 * extend beyond the minimal)
2855 * Scans devices below @bus including subordinate buses. Returns new
2856 * subordinate number including all the found devices. Passing
2857 * @available_buses causes the remaining bus space to be distributed
2858 * equally between hotplug-capable bridges to allow future extension of the
2861 static unsigned int pci_scan_child_bus_extend(struct pci_bus *bus,
2862 unsigned int available_buses)
2864 unsigned int used_buses, normal_bridges = 0, hotplug_bridges = 0;
2865 unsigned int start = bus->busn_res.start;
2866 unsigned int devfn, fn, cmax, max = start;
2867 struct pci_dev *dev;
2870 dev_dbg(&bus->dev, "scanning bus\n");
2872 /* Go find them, Rover! */
2873 for (devfn = 0; devfn < 256; devfn += 8) {
2874 nr_devs = pci_scan_slot(bus, devfn);
2877 * The Jailhouse hypervisor may pass individual functions of a
2878 * multi-function device to a guest without passing function 0.
2879 * Look for them as well.
2881 if (jailhouse_paravirt() && nr_devs == 0) {
2882 for (fn = 1; fn < 8; fn++) {
2883 dev = pci_scan_single_device(bus, devfn + fn);
2885 dev->multifunction = 1;
2890 /* Reserve buses for SR-IOV capability */
2891 used_buses = pci_iov_bus_range(bus);
2895 * After performing arch-dependent fixup of the bus, look behind
2896 * all PCI-to-PCI bridges on this bus.
2898 if (!bus->is_added) {
2899 dev_dbg(&bus->dev, "fixups for bus\n");
2900 pcibios_fixup_bus(bus);
2905 * Calculate how many hotplug bridges and normal bridges there
2906 * are on this bus. We will distribute the additional available
2907 * buses between hotplug bridges.
2909 for_each_pci_bridge(dev, bus) {
2910 if (dev->is_hotplug_bridge)
2917 * Scan bridges that are already configured. We don't touch them
2918 * unless they are misconfigured (which will be done in the second
2921 for_each_pci_bridge(dev, bus) {
2923 max = pci_scan_bridge_extend(bus, dev, max, 0, 0);
2926 * Reserve one bus for each bridge now to avoid extending
2927 * hotplug bridges too much during the second scan below.
2931 used_buses += cmax - max - 1;
2934 /* Scan bridges that need to be reconfigured */
2935 for_each_pci_bridge(dev, bus) {
2936 unsigned int buses = 0;
2938 if (!hotplug_bridges && normal_bridges == 1) {
2941 * There is only one bridge on the bus (upstream
2942 * port) so it gets all available buses which it
2943 * can then distribute to the possible hotplug
2946 buses = available_buses;
2947 } else if (dev->is_hotplug_bridge) {
2950 * Distribute the extra buses between hotplug
2953 buses = available_buses / hotplug_bridges;
2954 buses = min(buses, available_buses - used_buses + 1);
2958 max = pci_scan_bridge_extend(bus, dev, cmax, buses, 1);
2959 /* One bus is already accounted so don't add it again */
2961 used_buses += max - cmax - 1;
2965 * Make sure a hotplug bridge has at least the minimum requested
2966 * number of buses but allow it to grow up to the maximum available
2967 * bus number of there is room.
2969 if (bus->self && bus->self->is_hotplug_bridge) {
2970 used_buses = max_t(unsigned int, available_buses,
2971 pci_hotplug_bus_size - 1);
2972 if (max - start < used_buses) {
2973 max = start + used_buses;
2975 /* Do not allocate more buses than we have room left */
2976 if (max > bus->busn_res.end)
2977 max = bus->busn_res.end;
2979 dev_dbg(&bus->dev, "%pR extended by %#02x\n",
2980 &bus->busn_res, max - start);
2985 * We've scanned the bus and so we know all about what's on
2986 * the other side of any bridges that may be on this bus plus
2989 * Return how far we've got finding sub-buses.
2991 dev_dbg(&bus->dev, "bus scan returning with max=%02x\n", max);
2996 * pci_scan_child_bus() - Scan devices below a bus
2997 * @bus: Bus to scan for devices
2999 * Scans devices below @bus including subordinate buses. Returns new
3000 * subordinate number including all the found devices.
3002 unsigned int pci_scan_child_bus(struct pci_bus *bus)
3004 return pci_scan_child_bus_extend(bus, 0);
3006 EXPORT_SYMBOL_GPL(pci_scan_child_bus);
3009 * pcibios_root_bridge_prepare - Platform-specific host bridge setup
3010 * @bridge: Host bridge to set up
3012 * Default empty implementation. Replace with an architecture-specific setup
3013 * routine, if necessary.
3015 int __weak pcibios_root_bridge_prepare(struct pci_host_bridge *bridge)
3020 void __weak pcibios_add_bus(struct pci_bus *bus)
3024 void __weak pcibios_remove_bus(struct pci_bus *bus)
3028 struct pci_bus *pci_create_root_bus(struct device *parent, int bus,
3029 struct pci_ops *ops, void *sysdata, struct list_head *resources)
3032 struct pci_host_bridge *bridge;
3034 bridge = pci_alloc_host_bridge(0);
3038 bridge->dev.parent = parent;
3040 list_splice_init(resources, &bridge->windows);
3041 bridge->sysdata = sysdata;
3042 bridge->busnr = bus;
3045 error = pci_register_host_bridge(bridge);
3052 put_device(&bridge->dev);
3055 EXPORT_SYMBOL_GPL(pci_create_root_bus);
3057 int pci_host_probe(struct pci_host_bridge *bridge)
3059 struct pci_bus *bus, *child;
3062 ret = pci_scan_root_bus_bridge(bridge);
3064 dev_err(bridge->dev.parent, "Scanning root bridge failed");
3071 * We insert PCI resources into the iomem_resource and
3072 * ioport_resource trees in either pci_bus_claim_resources()
3073 * or pci_bus_assign_resources().
3075 if (pci_has_flag(PCI_PROBE_ONLY)) {
3076 pci_bus_claim_resources(bus);
3078 pci_bus_size_bridges(bus);
3079 pci_bus_assign_resources(bus);
3081 list_for_each_entry(child, &bus->children, node)
3082 pcie_bus_configure_settings(child);
3085 pci_bus_add_devices(bus);
3088 EXPORT_SYMBOL_GPL(pci_host_probe);
3090 int pci_bus_insert_busn_res(struct pci_bus *b, int bus, int bus_max)
3092 struct resource *res = &b->busn_res;
3093 struct resource *parent_res, *conflict;
3097 res->flags = IORESOURCE_BUS;
3099 if (!pci_is_root_bus(b))
3100 parent_res = &b->parent->busn_res;
3102 parent_res = get_pci_domain_busn_res(pci_domain_nr(b));
3103 res->flags |= IORESOURCE_PCI_FIXED;
3106 conflict = request_resource_conflict(parent_res, res);
3110 "busn_res: can not insert %pR under %s%pR (conflicts with %s %pR)\n",
3111 res, pci_is_root_bus(b) ? "domain " : "",
3112 parent_res, conflict->name, conflict);
3114 return conflict == NULL;
3117 int pci_bus_update_busn_res_end(struct pci_bus *b, int bus_max)
3119 struct resource *res = &b->busn_res;
3120 struct resource old_res = *res;
3121 resource_size_t size;
3124 if (res->start > bus_max)
3127 size = bus_max - res->start + 1;
3128 ret = adjust_resource(res, res->start, size);
3129 dev_info(&b->dev, "busn_res: %pR end %s updated to %02x\n",
3130 &old_res, ret ? "can not be" : "is", bus_max);
3132 if (!ret && !res->parent)
3133 pci_bus_insert_busn_res(b, res->start, res->end);
3138 void pci_bus_release_busn_res(struct pci_bus *b)
3140 struct resource *res = &b->busn_res;
3143 if (!res->flags || !res->parent)
3146 ret = release_resource(res);
3147 dev_info(&b->dev, "busn_res: %pR %s released\n",
3148 res, ret ? "can not be" : "is");
3151 int pci_scan_root_bus_bridge(struct pci_host_bridge *bridge)
3153 struct resource_entry *window;
3161 resource_list_for_each_entry(window, &bridge->windows)
3162 if (window->res->flags & IORESOURCE_BUS) {
3163 bridge->busnr = window->res->start;
3168 ret = pci_register_host_bridge(bridge);
3173 bus = bridge->busnr;
3177 "No busn resource found for root bus, will use [bus %02x-ff]\n",
3179 pci_bus_insert_busn_res(b, bus, 255);
3182 max = pci_scan_child_bus(b);
3185 pci_bus_update_busn_res_end(b, max);
3189 EXPORT_SYMBOL(pci_scan_root_bus_bridge);
3191 struct pci_bus *pci_scan_root_bus(struct device *parent, int bus,
3192 struct pci_ops *ops, void *sysdata, struct list_head *resources)
3194 struct resource_entry *window;
3199 resource_list_for_each_entry(window, resources)
3200 if (window->res->flags & IORESOURCE_BUS) {
3205 b = pci_create_root_bus(parent, bus, ops, sysdata, resources);
3211 "No busn resource found for root bus, will use [bus %02x-ff]\n",
3213 pci_bus_insert_busn_res(b, bus, 255);
3216 max = pci_scan_child_bus(b);
3219 pci_bus_update_busn_res_end(b, max);
3223 EXPORT_SYMBOL(pci_scan_root_bus);
3225 struct pci_bus *pci_scan_bus(int bus, struct pci_ops *ops,
3228 LIST_HEAD(resources);
3231 pci_add_resource(&resources, &ioport_resource);
3232 pci_add_resource(&resources, &iomem_resource);
3233 pci_add_resource(&resources, &busn_resource);
3234 b = pci_create_root_bus(NULL, bus, ops, sysdata, &resources);
3236 pci_scan_child_bus(b);
3238 pci_free_resource_list(&resources);
3242 EXPORT_SYMBOL(pci_scan_bus);
3245 * pci_rescan_bus_bridge_resize - Scan a PCI bus for devices
3246 * @bridge: PCI bridge for the bus to scan
3248 * Scan a PCI bus and child buses for new devices, add them,
3249 * and enable them, resizing bridge mmio/io resource if necessary
3250 * and possible. The caller must ensure the child devices are already
3251 * removed for resizing to occur.
3253 * Returns the max number of subordinate bus discovered.
3255 unsigned int pci_rescan_bus_bridge_resize(struct pci_dev *bridge)
3258 struct pci_bus *bus = bridge->subordinate;
3260 max = pci_scan_child_bus(bus);
3262 pci_assign_unassigned_bridge_resources(bridge);
3264 pci_bus_add_devices(bus);
3270 * pci_rescan_bus - Scan a PCI bus for devices
3271 * @bus: PCI bus to scan
3273 * Scan a PCI bus and child buses for new devices, add them,
3276 * Returns the max number of subordinate bus discovered.
3278 unsigned int pci_rescan_bus(struct pci_bus *bus)
3282 max = pci_scan_child_bus(bus);
3283 pci_assign_unassigned_bus_resources(bus);
3284 pci_bus_add_devices(bus);
3288 EXPORT_SYMBOL_GPL(pci_rescan_bus);
3291 * pci_rescan_bus(), pci_rescan_bus_bridge_resize() and PCI device removal
3292 * routines should always be executed under this mutex.
3294 static DEFINE_MUTEX(pci_rescan_remove_lock);
3296 void pci_lock_rescan_remove(void)
3298 mutex_lock(&pci_rescan_remove_lock);
3300 EXPORT_SYMBOL_GPL(pci_lock_rescan_remove);
3302 void pci_unlock_rescan_remove(void)
3304 mutex_unlock(&pci_rescan_remove_lock);
3306 EXPORT_SYMBOL_GPL(pci_unlock_rescan_remove);
3308 static int __init pci_sort_bf_cmp(const struct device *d_a,
3309 const struct device *d_b)
3311 const struct pci_dev *a = to_pci_dev(d_a);
3312 const struct pci_dev *b = to_pci_dev(d_b);
3314 if (pci_domain_nr(a->bus) < pci_domain_nr(b->bus)) return -1;
3315 else if (pci_domain_nr(a->bus) > pci_domain_nr(b->bus)) return 1;
3317 if (a->bus->number < b->bus->number) return -1;
3318 else if (a->bus->number > b->bus->number) return 1;
3320 if (a->devfn < b->devfn) return -1;
3321 else if (a->devfn > b->devfn) return 1;
3326 void __init pci_sort_breadthfirst(void)
3328 bus_sort_breadthfirst(&pci_bus_type, &pci_sort_bf_cmp);
3331 int pci_hp_add_bridge(struct pci_dev *dev)
3333 struct pci_bus *parent = dev->bus;
3334 int busnr, start = parent->busn_res.start;
3335 unsigned int available_buses = 0;
3336 int end = parent->busn_res.end;
3338 for (busnr = start; busnr <= end; busnr++) {
3339 if (!pci_find_bus(pci_domain_nr(parent), busnr))
3342 if (busnr-- > end) {
3343 pci_err(dev, "No bus number available for hot-added bridge\n");
3347 /* Scan bridges that are already configured */
3348 busnr = pci_scan_bridge(parent, dev, busnr, 0);
3351 * Distribute the available bus numbers between hotplug-capable
3352 * bridges to make extending the chain later possible.
3354 available_buses = end - busnr;
3356 /* Scan bridges that need to be reconfigured */
3357 pci_scan_bridge_extend(parent, dev, busnr, available_buses, 1);
3359 if (!dev->subordinate)
3364 EXPORT_SYMBOL_GPL(pci_hp_add_bridge);