Merge tag 'for-5.1-rc6-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave...
[linux-2.6-microblaze.git] / drivers / pci / ats.c
1 // SPDX-License-Identifier: GPL-2.0
2 /*
3  * PCI Express I/O Virtualization (IOV) support
4  *   Address Translation Service 1.0
5  *   Page Request Interface added by Joerg Roedel <joerg.roedel@amd.com>
6  *   PASID support added by Joerg Roedel <joerg.roedel@amd.com>
7  *
8  * Copyright (C) 2009 Intel Corporation, Yu Zhao <yu.zhao@intel.com>
9  * Copyright (C) 2011 Advanced Micro Devices,
10  */
11
12 #include <linux/export.h>
13 #include <linux/pci-ats.h>
14 #include <linux/pci.h>
15 #include <linux/slab.h>
16
17 #include "pci.h"
18
19 void pci_ats_init(struct pci_dev *dev)
20 {
21         int pos;
22
23         if (pci_ats_disabled())
24                 return;
25
26         pos = pci_find_ext_capability(dev, PCI_EXT_CAP_ID_ATS);
27         if (!pos)
28                 return;
29
30         dev->ats_cap = pos;
31 }
32
33 /**
34  * pci_enable_ats - enable the ATS capability
35  * @dev: the PCI device
36  * @ps: the IOMMU page shift
37  *
38  * Returns 0 on success, or negative on failure.
39  */
40 int pci_enable_ats(struct pci_dev *dev, int ps)
41 {
42         u16 ctrl;
43         struct pci_dev *pdev;
44
45         if (!dev->ats_cap)
46                 return -EINVAL;
47
48         if (WARN_ON(dev->ats_enabled))
49                 return -EBUSY;
50
51         if (ps < PCI_ATS_MIN_STU)
52                 return -EINVAL;
53
54         /*
55          * Note that enabling ATS on a VF fails unless it's already enabled
56          * with the same STU on the PF.
57          */
58         ctrl = PCI_ATS_CTRL_ENABLE;
59         if (dev->is_virtfn) {
60                 pdev = pci_physfn(dev);
61                 if (pdev->ats_stu != ps)
62                         return -EINVAL;
63
64                 atomic_inc(&pdev->ats_ref_cnt);  /* count enabled VFs */
65         } else {
66                 dev->ats_stu = ps;
67                 ctrl |= PCI_ATS_CTRL_STU(dev->ats_stu - PCI_ATS_MIN_STU);
68         }
69         pci_write_config_word(dev, dev->ats_cap + PCI_ATS_CTRL, ctrl);
70
71         dev->ats_enabled = 1;
72         return 0;
73 }
74 EXPORT_SYMBOL_GPL(pci_enable_ats);
75
76 /**
77  * pci_disable_ats - disable the ATS capability
78  * @dev: the PCI device
79  */
80 void pci_disable_ats(struct pci_dev *dev)
81 {
82         struct pci_dev *pdev;
83         u16 ctrl;
84
85         if (WARN_ON(!dev->ats_enabled))
86                 return;
87
88         if (atomic_read(&dev->ats_ref_cnt))
89                 return;         /* VFs still enabled */
90
91         if (dev->is_virtfn) {
92                 pdev = pci_physfn(dev);
93                 atomic_dec(&pdev->ats_ref_cnt);
94         }
95
96         pci_read_config_word(dev, dev->ats_cap + PCI_ATS_CTRL, &ctrl);
97         ctrl &= ~PCI_ATS_CTRL_ENABLE;
98         pci_write_config_word(dev, dev->ats_cap + PCI_ATS_CTRL, ctrl);
99
100         dev->ats_enabled = 0;
101 }
102 EXPORT_SYMBOL_GPL(pci_disable_ats);
103
104 void pci_restore_ats_state(struct pci_dev *dev)
105 {
106         u16 ctrl;
107
108         if (!dev->ats_enabled)
109                 return;
110
111         ctrl = PCI_ATS_CTRL_ENABLE;
112         if (!dev->is_virtfn)
113                 ctrl |= PCI_ATS_CTRL_STU(dev->ats_stu - PCI_ATS_MIN_STU);
114         pci_write_config_word(dev, dev->ats_cap + PCI_ATS_CTRL, ctrl);
115 }
116 EXPORT_SYMBOL_GPL(pci_restore_ats_state);
117
118 /**
119  * pci_ats_queue_depth - query the ATS Invalidate Queue Depth
120  * @dev: the PCI device
121  *
122  * Returns the queue depth on success, or negative on failure.
123  *
124  * The ATS spec uses 0 in the Invalidate Queue Depth field to
125  * indicate that the function can accept 32 Invalidate Request.
126  * But here we use the `real' values (i.e. 1~32) for the Queue
127  * Depth; and 0 indicates the function shares the Queue with
128  * other functions (doesn't exclusively own a Queue).
129  */
130 int pci_ats_queue_depth(struct pci_dev *dev)
131 {
132         u16 cap;
133
134         if (!dev->ats_cap)
135                 return -EINVAL;
136
137         if (dev->is_virtfn)
138                 return 0;
139
140         pci_read_config_word(dev, dev->ats_cap + PCI_ATS_CAP, &cap);
141         return PCI_ATS_CAP_QDEP(cap) ? PCI_ATS_CAP_QDEP(cap) : PCI_ATS_MAX_QDEP;
142 }
143 EXPORT_SYMBOL_GPL(pci_ats_queue_depth);
144
145 /**
146  * pci_ats_page_aligned - Return Page Aligned Request bit status.
147  * @pdev: the PCI device
148  *
149  * Returns 1, if the Untranslated Addresses generated by the device
150  * are always aligned or 0 otherwise.
151  *
152  * Per PCIe spec r4.0, sec 10.5.1.2, if the Page Aligned Request bit
153  * is set, it indicates the Untranslated Addresses generated by the
154  * device are always aligned to a 4096 byte boundary.
155  */
156 int pci_ats_page_aligned(struct pci_dev *pdev)
157 {
158         u16 cap;
159
160         if (!pdev->ats_cap)
161                 return 0;
162
163         pci_read_config_word(pdev, pdev->ats_cap + PCI_ATS_CAP, &cap);
164
165         if (cap & PCI_ATS_CAP_PAGE_ALIGNED)
166                 return 1;
167
168         return 0;
169 }
170 EXPORT_SYMBOL_GPL(pci_ats_page_aligned);
171
172 #ifdef CONFIG_PCI_PRI
173 /**
174  * pci_enable_pri - Enable PRI capability
175  * @ pdev: PCI device structure
176  *
177  * Returns 0 on success, negative value on error
178  */
179 int pci_enable_pri(struct pci_dev *pdev, u32 reqs)
180 {
181         u16 control, status;
182         u32 max_requests;
183         int pos;
184
185         if (WARN_ON(pdev->pri_enabled))
186                 return -EBUSY;
187
188         pos = pci_find_ext_capability(pdev, PCI_EXT_CAP_ID_PRI);
189         if (!pos)
190                 return -EINVAL;
191
192         pci_read_config_word(pdev, pos + PCI_PRI_STATUS, &status);
193         if (!(status & PCI_PRI_STATUS_STOPPED))
194                 return -EBUSY;
195
196         pci_read_config_dword(pdev, pos + PCI_PRI_MAX_REQ, &max_requests);
197         reqs = min(max_requests, reqs);
198         pdev->pri_reqs_alloc = reqs;
199         pci_write_config_dword(pdev, pos + PCI_PRI_ALLOC_REQ, reqs);
200
201         control = PCI_PRI_CTRL_ENABLE;
202         pci_write_config_word(pdev, pos + PCI_PRI_CTRL, control);
203
204         pdev->pri_enabled = 1;
205
206         return 0;
207 }
208 EXPORT_SYMBOL_GPL(pci_enable_pri);
209
210 /**
211  * pci_disable_pri - Disable PRI capability
212  * @pdev: PCI device structure
213  *
214  * Only clears the enabled-bit, regardless of its former value
215  */
216 void pci_disable_pri(struct pci_dev *pdev)
217 {
218         u16 control;
219         int pos;
220
221         if (WARN_ON(!pdev->pri_enabled))
222                 return;
223
224         pos = pci_find_ext_capability(pdev, PCI_EXT_CAP_ID_PRI);
225         if (!pos)
226                 return;
227
228         pci_read_config_word(pdev, pos + PCI_PRI_CTRL, &control);
229         control &= ~PCI_PRI_CTRL_ENABLE;
230         pci_write_config_word(pdev, pos + PCI_PRI_CTRL, control);
231
232         pdev->pri_enabled = 0;
233 }
234 EXPORT_SYMBOL_GPL(pci_disable_pri);
235
236 /**
237  * pci_restore_pri_state - Restore PRI
238  * @pdev: PCI device structure
239  */
240 void pci_restore_pri_state(struct pci_dev *pdev)
241 {
242         u16 control = PCI_PRI_CTRL_ENABLE;
243         u32 reqs = pdev->pri_reqs_alloc;
244         int pos;
245
246         if (!pdev->pri_enabled)
247                 return;
248
249         pos = pci_find_ext_capability(pdev, PCI_EXT_CAP_ID_PRI);
250         if (!pos)
251                 return;
252
253         pci_write_config_dword(pdev, pos + PCI_PRI_ALLOC_REQ, reqs);
254         pci_write_config_word(pdev, pos + PCI_PRI_CTRL, control);
255 }
256 EXPORT_SYMBOL_GPL(pci_restore_pri_state);
257
258 /**
259  * pci_reset_pri - Resets device's PRI state
260  * @pdev: PCI device structure
261  *
262  * The PRI capability must be disabled before this function is called.
263  * Returns 0 on success, negative value on error.
264  */
265 int pci_reset_pri(struct pci_dev *pdev)
266 {
267         u16 control;
268         int pos;
269
270         if (WARN_ON(pdev->pri_enabled))
271                 return -EBUSY;
272
273         pos = pci_find_ext_capability(pdev, PCI_EXT_CAP_ID_PRI);
274         if (!pos)
275                 return -EINVAL;
276
277         control = PCI_PRI_CTRL_RESET;
278         pci_write_config_word(pdev, pos + PCI_PRI_CTRL, control);
279
280         return 0;
281 }
282 EXPORT_SYMBOL_GPL(pci_reset_pri);
283 #endif /* CONFIG_PCI_PRI */
284
285 #ifdef CONFIG_PCI_PASID
286 /**
287  * pci_enable_pasid - Enable the PASID capability
288  * @pdev: PCI device structure
289  * @features: Features to enable
290  *
291  * Returns 0 on success, negative value on error. This function checks
292  * whether the features are actually supported by the device and returns
293  * an error if not.
294  */
295 int pci_enable_pasid(struct pci_dev *pdev, int features)
296 {
297         u16 control, supported;
298         int pos;
299
300         if (WARN_ON(pdev->pasid_enabled))
301                 return -EBUSY;
302
303         if (!pdev->eetlp_prefix_path)
304                 return -EINVAL;
305
306         pos = pci_find_ext_capability(pdev, PCI_EXT_CAP_ID_PASID);
307         if (!pos)
308                 return -EINVAL;
309
310         pci_read_config_word(pdev, pos + PCI_PASID_CAP, &supported);
311         supported &= PCI_PASID_CAP_EXEC | PCI_PASID_CAP_PRIV;
312
313         /* User wants to enable anything unsupported? */
314         if ((supported & features) != features)
315                 return -EINVAL;
316
317         control = PCI_PASID_CTRL_ENABLE | features;
318         pdev->pasid_features = features;
319
320         pci_write_config_word(pdev, pos + PCI_PASID_CTRL, control);
321
322         pdev->pasid_enabled = 1;
323
324         return 0;
325 }
326 EXPORT_SYMBOL_GPL(pci_enable_pasid);
327
328 /**
329  * pci_disable_pasid - Disable the PASID capability
330  * @pdev: PCI device structure
331  */
332 void pci_disable_pasid(struct pci_dev *pdev)
333 {
334         u16 control = 0;
335         int pos;
336
337         if (WARN_ON(!pdev->pasid_enabled))
338                 return;
339
340         pos = pci_find_ext_capability(pdev, PCI_EXT_CAP_ID_PASID);
341         if (!pos)
342                 return;
343
344         pci_write_config_word(pdev, pos + PCI_PASID_CTRL, control);
345
346         pdev->pasid_enabled = 0;
347 }
348 EXPORT_SYMBOL_GPL(pci_disable_pasid);
349
350 /**
351  * pci_restore_pasid_state - Restore PASID capabilities
352  * @pdev: PCI device structure
353  */
354 void pci_restore_pasid_state(struct pci_dev *pdev)
355 {
356         u16 control;
357         int pos;
358
359         if (!pdev->pasid_enabled)
360                 return;
361
362         pos = pci_find_ext_capability(pdev, PCI_EXT_CAP_ID_PASID);
363         if (!pos)
364                 return;
365
366         control = PCI_PASID_CTRL_ENABLE | pdev->pasid_features;
367         pci_write_config_word(pdev, pos + PCI_PASID_CTRL, control);
368 }
369 EXPORT_SYMBOL_GPL(pci_restore_pasid_state);
370
371 /**
372  * pci_pasid_features - Check which PASID features are supported
373  * @pdev: PCI device structure
374  *
375  * Returns a negative value when no PASI capability is present.
376  * Otherwise is returns a bitmask with supported features. Current
377  * features reported are:
378  * PCI_PASID_CAP_EXEC - Execute permission supported
379  * PCI_PASID_CAP_PRIV - Privileged mode supported
380  */
381 int pci_pasid_features(struct pci_dev *pdev)
382 {
383         u16 supported;
384         int pos;
385
386         pos = pci_find_ext_capability(pdev, PCI_EXT_CAP_ID_PASID);
387         if (!pos)
388                 return -EINVAL;
389
390         pci_read_config_word(pdev, pos + PCI_PASID_CAP, &supported);
391
392         supported &= PCI_PASID_CAP_EXEC | PCI_PASID_CAP_PRIV;
393
394         return supported;
395 }
396 EXPORT_SYMBOL_GPL(pci_pasid_features);
397
398 /**
399  * pci_prg_resp_pasid_required - Return PRG Response PASID Required bit
400  *                               status.
401  * @pdev: PCI device structure
402  *
403  * Returns 1 if PASID is required in PRG Response Message, 0 otherwise.
404  *
405  * Even though the PRG response PASID status is read from PRI Status
406  * Register, since this API will mainly be used by PASID users, this
407  * function is defined within #ifdef CONFIG_PCI_PASID instead of
408  * CONFIG_PCI_PRI.
409  */
410 int pci_prg_resp_pasid_required(struct pci_dev *pdev)
411 {
412         u16 status;
413         int pos;
414
415         pos = pci_find_ext_capability(pdev, PCI_EXT_CAP_ID_PRI);
416         if (!pos)
417                 return 0;
418
419         pci_read_config_word(pdev, pos + PCI_PRI_STATUS, &status);
420
421         if (status & PCI_PRI_STATUS_PASID)
422                 return 1;
423
424         return 0;
425 }
426 EXPORT_SYMBOL_GPL(pci_prg_resp_pasid_required);
427
428 #define PASID_NUMBER_SHIFT      8
429 #define PASID_NUMBER_MASK       (0x1f << PASID_NUMBER_SHIFT)
430 /**
431  * pci_max_pasid - Get maximum number of PASIDs supported by device
432  * @pdev: PCI device structure
433  *
434  * Returns negative value when PASID capability is not present.
435  * Otherwise it returns the numer of supported PASIDs.
436  */
437 int pci_max_pasids(struct pci_dev *pdev)
438 {
439         u16 supported;
440         int pos;
441
442         pos = pci_find_ext_capability(pdev, PCI_EXT_CAP_ID_PASID);
443         if (!pos)
444                 return -EINVAL;
445
446         pci_read_config_word(pdev, pos + PCI_PASID_CAP, &supported);
447
448         supported = (supported & PASID_NUMBER_MASK) >> PASID_NUMBER_SHIFT;
449
450         return (1 << supported);
451 }
452 EXPORT_SYMBOL_GPL(pci_max_pasids);
453 #endif /* CONFIG_PCI_PASID */