1 // SPDX-License-Identifier: GPL-2.0
2 #include <linux/kernel.h>
4 #include <linux/of_device.h>
5 #include <linux/of_address.h>
6 #include <linux/of_iommu.h>
7 #include <linux/of_reserved_mem.h>
8 #include <linux/dma-direct.h> /* for bus_dma_region */
9 #include <linux/dma-map-ops.h>
10 #include <linux/init.h>
11 #include <linux/mod_devicetable.h>
12 #include <linux/slab.h>
13 #include <linux/platform_device.h>
15 #include <asm/errno.h>
16 #include "of_private.h"
19 * of_match_device - Tell if a struct device matches an of_device_id list
20 * @matches: array of of device match structures to search in
21 * @dev: the of device structure to match against
23 * Used by a driver to check whether an platform_device present in the
24 * system is in its list of supported devices.
26 const struct of_device_id *of_match_device(const struct of_device_id *matches,
27 const struct device *dev)
29 if (!matches || !dev->of_node || dev->of_node_reused)
31 return of_match_node(matches, dev->of_node);
33 EXPORT_SYMBOL(of_match_device);
36 of_dma_set_restricted_buffer(struct device *dev, struct device_node *np)
38 struct device_node *node, *of_node = dev->of_node;
41 if (!IS_ENABLED(CONFIG_DMA_RESTRICTED_POOL))
44 count = of_property_count_elems_of_size(of_node, "memory-region",
47 * If dev->of_node doesn't exist or doesn't contain memory-region, try
48 * the OF node having DMA configuration.
52 count = of_property_count_elems_of_size(
53 of_node, "memory-region", sizeof(u32));
56 for (i = 0; i < count; i++) {
57 node = of_parse_phandle(of_node, "memory-region", i);
59 * There might be multiple memory regions, but only one
60 * restricted-dma-pool region is allowed.
62 if (of_device_is_compatible(node, "restricted-dma-pool") &&
63 of_device_is_available(node)) {
71 * Attempt to initialize a restricted-dma-pool region if one was found.
72 * Note that count can hold a negative error code.
74 if (i < count && of_reserved_mem_device_init_by_idx(dev, of_node, i))
75 dev_warn(dev, "failed to initialise \"restricted-dma-pool\" memory node\n");
79 * of_dma_configure_id - Setup DMA configuration
80 * @dev: Device to apply DMA configuration
81 * @np: Pointer to OF node having DMA configuration
82 * @force_dma: Whether device is to be set up by of_dma_configure() even if
83 * DMA capability is not explicitly described by firmware.
84 * @id: Optional const pointer value input id
86 * Try to get devices's DMA configuration from DT and update it
89 * If platform code needs to use its own special DMA configuration, it
90 * can use a platform bus notifier and handle BUS_NOTIFY_ADD_DEVICE events
91 * to fix up DMA configuration.
93 int of_dma_configure_id(struct device *dev, struct device_node *np,
94 bool force_dma, const u32 *id)
96 const struct bus_dma_region *map = NULL;
97 struct device_node *bus_np;
99 u64 mask, end, size = 0;
104 if (np == dev->of_node)
105 bus_np = __of_get_dma_parent(np);
107 bus_np = of_node_get(np);
109 ret = of_dma_get_range(bus_np, &map);
113 * For legacy reasons, we have to assume some devices need
114 * DMA configuration regardless of whether "dma-ranges" is
115 * correctly specified or not.
118 return ret == -ENODEV ? 0 : ret;
120 const struct bus_dma_region *r = map;
123 /* Determine the overall bounds of all DMA regions */
124 for (dma_start = ~0; r->size; r++) {
125 /* Take lower and upper limits */
126 if (r->dma_start < dma_start)
127 dma_start = r->dma_start;
128 if (r->dma_start + r->size > dma_end)
129 dma_end = r->dma_start + r->size;
131 size = dma_end - dma_start;
134 * Add a work around to treat the size as mask + 1 in case
135 * it is defined in DT as a mask.
138 dev_warn(dev, "Invalid size 0x%llx for dma-range(s)\n",
144 dev_err(dev, "Adjusted size 0x%llx invalid\n", size);
151 * If @dev is expected to be DMA-capable then the bus code that created
152 * it should have initialised its dma_mask pointer by this point. For
153 * now, we'll continue the legacy behaviour of coercing it to the
154 * coherent mask if not, but we'll no longer do so quietly.
156 if (!dev->dma_mask) {
157 dev_warn(dev, "DMA mask not set\n");
158 dev->dma_mask = &dev->coherent_dma_mask;
161 if (!size && dev->coherent_dma_mask)
162 size = max(dev->coherent_dma_mask, dev->coherent_dma_mask + 1);
167 * Limit coherent and dma mask based on size and default mask
170 end = dma_start + size - 1;
171 mask = DMA_BIT_MASK(ilog2(end) + 1);
172 dev->coherent_dma_mask &= mask;
173 *dev->dma_mask &= mask;
174 /* ...but only set bus limit and range map if we found valid dma-ranges earlier */
176 dev->bus_dma_limit = end;
177 dev->dma_range_map = map;
180 coherent = of_dma_is_coherent(np);
181 dev_dbg(dev, "device is%sdma coherent\n",
182 coherent ? " " : " not ");
184 iommu_ret = of_iommu_configure(dev, np, id);
185 if (iommu_ret == -EPROBE_DEFER) {
186 /* Don't touch range map if it wasn't set from a valid dma-ranges */
188 dev->dma_range_map = NULL;
190 return -EPROBE_DEFER;
191 } else if (iommu_ret == -ENODEV) {
192 dev_dbg(dev, "device is not behind an iommu\n");
193 } else if (iommu_ret) {
194 dev_err(dev, "iommu configuration for device failed with %pe\n",
198 * Historically this routine doesn't fail driver probing
199 * due to errors in of_iommu_configure()
202 dev_dbg(dev, "device is behind an iommu\n");
204 arch_setup_dma_ops(dev, dma_start, size, coherent);
207 of_dma_set_restricted_buffer(dev, np);
211 EXPORT_SYMBOL_GPL(of_dma_configure_id);
213 const void *of_device_get_match_data(const struct device *dev)
215 const struct of_device_id *match;
217 match = of_match_device(dev->driver->of_match_table, dev);
223 EXPORT_SYMBOL(of_device_get_match_data);
226 * of_device_modalias - Fill buffer with newline terminated modalias string
227 * @dev: Calling device
228 * @str: Modalias string
231 ssize_t of_device_modalias(struct device *dev, char *str, ssize_t len)
235 if (!dev || !dev->of_node || dev->of_node_reused)
238 sl = of_modalias(dev->of_node, str, len - 2);
248 EXPORT_SYMBOL_GPL(of_device_modalias);
251 * of_device_uevent - Display OF related uevent information
252 * @dev: Device to display the uevent information for
253 * @env: Kernel object's userspace event reference to fill up
255 void of_device_uevent(const struct device *dev, struct kobj_uevent_env *env)
257 const char *compat, *type;
258 struct alias_prop *app;
262 if ((!dev) || (!dev->of_node))
265 add_uevent_var(env, "OF_NAME=%pOFn", dev->of_node);
266 add_uevent_var(env, "OF_FULLNAME=%pOF", dev->of_node);
267 type = of_node_get_device_type(dev->of_node);
269 add_uevent_var(env, "OF_TYPE=%s", type);
271 /* Since the compatible field can contain pretty much anything
272 * it's not really legal to split it out with commas. We split it
273 * up using a number of environment variables instead. */
274 of_property_for_each_string(dev->of_node, "compatible", p, compat) {
275 add_uevent_var(env, "OF_COMPATIBLE_%d=%s", seen, compat);
278 add_uevent_var(env, "OF_COMPATIBLE_N=%d", seen);
281 mutex_lock(&of_mutex);
282 list_for_each_entry(app, &aliases_lookup, link) {
283 if (dev->of_node == app->np) {
284 add_uevent_var(env, "OF_ALIAS_%d=%s", seen,
289 mutex_unlock(&of_mutex);
291 EXPORT_SYMBOL_GPL(of_device_uevent);
293 int of_device_uevent_modalias(const struct device *dev, struct kobj_uevent_env *env)
297 if ((!dev) || (!dev->of_node) || dev->of_node_reused)
300 /* Devicetree modalias is tricky, we add it in 2 steps */
301 if (add_uevent_var(env, "MODALIAS="))
304 sl = of_modalias(dev->of_node, &env->buf[env->buflen-1],
305 sizeof(env->buf) - env->buflen);
308 if (sl >= (sizeof(env->buf) - env->buflen))
314 EXPORT_SYMBOL_GPL(of_device_uevent_modalias);
317 * of_device_make_bus_id - Use the device node data to assign a unique name
318 * @dev: pointer to device structure that is linked to a device tree node
320 * This routine will first try using the translated bus address to
321 * derive a unique name. If it cannot, then it will prepend names from
322 * parent nodes until a unique name can be derived.
324 void of_device_make_bus_id(struct device *dev)
326 struct device_node *node = dev->of_node;
331 /* Construct the name, using parent nodes if necessary to ensure uniqueness */
332 while (node->parent) {
334 * If the address can be translated, then that is as much
335 * uniqueness as we need. Make it the first component and return
337 reg = of_get_property(node, "reg", NULL);
338 if (reg && (addr = of_translate_address(node, reg)) != OF_BAD_ADDR) {
339 if (!of_property_read_u32(node, "mask", &mask))
340 dev_set_name(dev, dev_name(dev) ? "%llx.%x.%pOFn:%s" : "%llx.%x.%pOFn",
341 addr, ffs(mask) - 1, node, dev_name(dev));
344 dev_set_name(dev, dev_name(dev) ? "%llx.%pOFn:%s" : "%llx.%pOFn",
345 addr, node, dev_name(dev));
349 /* format arguments only used if dev_name() resolves to NULL */
350 dev_set_name(dev, dev_name(dev) ? "%s:%s" : "%s",
351 kbasename(node->full_name), dev_name(dev));
355 EXPORT_SYMBOL_GPL(of_device_make_bus_id);