drivers/net/wwan/iosm/iosm_ipc_imem.h

   1 /* SPDX-License-Identifier: GPL-2.0-only
   2  *
   3  * Copyright (C) 2020-21 Intel Corporation.
   4  */
   5
   6 #ifndef IOSM_IPC_IMEM_H
   7 #define IOSM_IPC_IMEM_H
   8
   9 #include <linux/skbuff.h>
  10
  11 #include "iosm_ipc_mmio.h"
  12 #include "iosm_ipc_pcie.h"
  13 #include "iosm_ipc_uevent.h"
  14 #include "iosm_ipc_wwan.h"
  15 #include "iosm_ipc_task_queue.h"
  16
  17 struct ipc_chnl_cfg;
  18
  19 /* IRQ moderation in usec */
  20 #define IRQ_MOD_OFF 0
  21 #define IRQ_MOD_NET 1000
  22 #define IRQ_MOD_TRC 4000
  23
  24 /* Either the PSI image is accepted by CP or the suspended flash tool is waken,
  25  * informed that the CP ROM driver is not ready to process the PSI image.
  26  * unit : milliseconds
  27  */
  28 #define IPC_PSI_TRANSFER_TIMEOUT 3000
  29
  30 /* Timeout in 20 msec to wait for the modem to boot up to
  31  * IPC_MEM_DEVICE_IPC_INIT state.
  32  * unit : milliseconds (500 * ipc_util_msleep(20))
  33  */
  34 #define IPC_MODEM_BOOT_TIMEOUT 500
  35
  36 /* Wait timeout for ipc status reflects IPC_MEM_DEVICE_IPC_UNINIT
  37  * unit : milliseconds
  38  */
  39 #define IPC_MODEM_UNINIT_TIMEOUT_MS 30
  40
  41 /* Pending time for processing data.
  42  * unit : milliseconds
  43  */
  44 #define IPC_PEND_DATA_TIMEOUT 500
  45
  46 /* The timeout in milliseconds for application to wait for remote time. */
  47 #define IPC_REMOTE_TS_TIMEOUT_MS 10
  48
  49 /* Timeout for TD allocation retry.
  50  * unit : milliseconds
  51  */
  52 #define IPC_TD_ALLOC_TIMER_PERIOD_MS 100
  53
  54 /* Host sleep target is host */
  55 #define IPC_HOST_SLEEP_HOST 0
  56
  57 /* Host sleep target is device */
  58 #define IPC_HOST_SLEEP_DEVICE 1
  59
  60 /* Sleep message, target host: AP enters sleep / target device: CP is
  61  * allowed to enter sleep and shall use the host sleep protocol
  62  */
  63 #define IPC_HOST_SLEEP_ENTER_SLEEP 0
  64
  65 /* Sleep_message, target host: AP exits  sleep / target device: CP is
  66  * NOT allowed to enter sleep
  67  */
  68 #define IPC_HOST_SLEEP_EXIT_SLEEP 1
  69
  70 #define IMEM_IRQ_DONT_CARE (-1)
  71
  72 #define IPC_MEM_MAX_CHANNELS 8
  73
  74 #define IPC_MEM_MUX_IP_SESSION_ENTRIES 8
  75
  76 #define IPC_MEM_MUX_IP_CH_IF_ID 0
  77
  78 #define TD_UPDATE_DEFAULT_TIMEOUT_USEC 1900
  79
  80 #define FORCE_UPDATE_DEFAULT_TIMEOUT_USEC 500
  81
  82 /* Sleep_message, target host: not applicable  / target device: CP is
  83  * allowed to enter sleep and shall NOT use the device sleep protocol
  84  */
  85 #define IPC_HOST_SLEEP_ENTER_SLEEP_NO_PROTOCOL 2
  86
  87 /* in_band_crash_signal IPC_MEM_INBAND_CRASH_SIG
  88  * Modem crash notification configuration. If this value is non-zero then
  89  * FEATURE_SET message will be sent to the Modem as a result the Modem will
  90  * signal Crash via Execution Stage register. If this value is zero then Modem
  91  * will use out-of-band method to notify about it's Crash.
  92  */
  93 #define IPC_MEM_INBAND_CRASH_SIG 1
  94
  95 /* Extra headroom to be allocated for DL SKBs to allow addition of Ethernet
  96  * header
  97  */
  98 #define IPC_MEM_DL_ETH_OFFSET 16
  99
 100 #define IPC_CB(skb) ((struct ipc_skb_cb *)((skb)->cb))
 101 #define IOSM_CHIP_INFO_SIZE_MAX 100
 102
 103 #define FULLY_FUNCTIONAL 0
 104 #define IOSM_DEVLINK_INIT 1
 105
 106 #define IPC_MEM_AUTO_SUSPEND_DELAY_MS 5000
 107
 108 /* List of the supported UL/DL pipes. */
 109 enum ipc_mem_pipes {
 110         IPC_MEM_PIPE_0 = 0,
 111         IPC_MEM_PIPE_1,
 112         IPC_MEM_PIPE_2,
 113         IPC_MEM_PIPE_3,
 114         IPC_MEM_PIPE_4,
 115         IPC_MEM_PIPE_5,
 116         IPC_MEM_PIPE_6,
 117         IPC_MEM_PIPE_7,
 118         IPC_MEM_PIPE_8,
 119         IPC_MEM_PIPE_9,
 120         IPC_MEM_PIPE_10,
 121         IPC_MEM_PIPE_11,
 122         IPC_MEM_PIPE_12,
 123         IPC_MEM_PIPE_13,
 124         IPC_MEM_PIPE_14,
 125         IPC_MEM_PIPE_15,
 126         IPC_MEM_PIPE_16,
 127         IPC_MEM_PIPE_17,
 128         IPC_MEM_PIPE_18,
 129         IPC_MEM_PIPE_19,
 130         IPC_MEM_PIPE_20,
 131         IPC_MEM_PIPE_21,
 132         IPC_MEM_PIPE_22,
 133         IPC_MEM_PIPE_23,
 134         IPC_MEM_MAX_PIPES
 135 };
 136
 137 /* Enum defining channel states. */
 138 enum ipc_channel_state {
 139         IMEM_CHANNEL_FREE,
 140         IMEM_CHANNEL_RESERVED,
 141         IMEM_CHANNEL_ACTIVE,
 142         IMEM_CHANNEL_CLOSING,
 143 };
 144
 145 /**
 146  * enum ipc_ctype - Enum defining supported channel type needed for control
 147  *                  /IP traffic.
 148  * @IPC_CTYPE_WWAN:             Used for IP traffic
 149  * @IPC_CTYPE_CTRL:             Used for Control Communication
 150  */
 151 enum ipc_ctype {
 152         IPC_CTYPE_WWAN,
 153         IPC_CTYPE_CTRL,
 154 };
 155
 156 /* Pipe direction. */
 157 enum ipc_mem_pipe_dir {
 158         IPC_MEM_DIR_UL,
 159         IPC_MEM_DIR_DL,
 160 };
 161
 162 /* HP update identifier. To be used as data for ipc_cp_irq_hpda_update() */
 163 enum ipc_hp_identifier {
 164         IPC_HP_MR = 0,
 165         IPC_HP_PM_TRIGGER,
 166         IPC_HP_WAKEUP_SPEC_TMR,
 167         IPC_HP_TD_UPD_TMR_START,
 168         IPC_HP_TD_UPD_TMR,
 169         IPC_HP_FAST_TD_UPD_TMR,
 170         IPC_HP_UL_WRITE_TD,
 171         IPC_HP_DL_PROCESS,
 172         IPC_HP_NET_CHANNEL_INIT,
 173         IPC_HP_CDEV_OPEN,
 174 };
 175
 176 /**
 177  * struct ipc_pipe - Structure for Pipe.
 178  * @tdr_start:                  Ipc private protocol Transfer Descriptor Ring
 179  * @channel:                    Id of the sio device, set by imem_sio_open,
 180  *                              needed to pass DL char to the user terminal
 181  * @skbr_start:                 Circular buffer for skbuf and the buffer
 182  *                              reference in a tdr_start entry.
 183  * @phy_tdr_start:              Transfer descriptor start address
 184  * @old_head:                   last head pointer reported to CP.
 185  * @old_tail:                   AP read position before CP moves the read
 186  *                              position to write/head. If CP has consumed the
 187  *                              buffers, AP has to freed the skbuf starting at
 188  *                              tdr_start[old_tail].
 189  * @nr_of_entries:              Number of elements of skb_start and tdr_start.
 190  * @max_nr_of_queued_entries:   Maximum number of queued entries in TDR
 191  * @accumulation_backoff:       Accumulation in usec for accumulation
 192  *                              backoff (0 = no acc backoff)
 193  * @irq_moderation:             timer in usec for irq_moderation
 194  *                              (0=no irq moderation)
 195  * @pipe_nr:                    Pipe identification number
 196  * @irq:                        Interrupt vector
 197  * @dir:                        Direction of data stream in pipe
 198  * @buf_size:                   Buffer size (in bytes) for preallocated
 199  *                              buffers (for DL pipes)
 200  * @nr_of_queued_entries:       Aueued number of entries
 201  * @is_open:                    Check for open pipe status
 202  */
 203 struct ipc_pipe {
 204         struct ipc_protocol_td *tdr_start;
 205         struct ipc_mem_channel *channel;
 206         struct sk_buff **skbr_start;
 207         dma_addr_t phy_tdr_start;
 208         u32 old_head;
 209         u32 old_tail;
 210         u32 nr_of_entries;
 211         u32 max_nr_of_queued_entries;
 212         u32 accumulation_backoff;
 213         u32 irq_moderation;
 214         u32 pipe_nr;
 215         u32 irq;
 216         enum ipc_mem_pipe_dir dir;
 217         u32 buf_size;
 218         u16 nr_of_queued_entries;
 219         u8 is_open:1;
 220 };
 221
 222 /**
 223  * struct ipc_mem_channel - Structure for Channel.
 224  * @channel_id:         Instance of the channel list and is return to the user
 225  *                      at the end of the open operation.
 226  * @ctype:              Control or netif channel.
 227  * @index:              unique index per ctype
 228  * @ul_pipe:            pipe objects
 229  * @dl_pipe:            pipe objects
 230  * @if_id:              Interface ID
 231  * @net_err_count:      Number of downlink errors returned by ipc_wwan_receive
 232  *                      interface at the entry point of the IP stack.
 233  * @state:              Free, reserved or busy (in use).
 234  * @ul_sem:             Needed for the blocking write or uplink transfer.
 235  * @ul_list:            Uplink accumulator which is filled by the uplink
 236  *                      char app or IP stack. The socket buffer pointer are
 237  *                      added to the descriptor list in the kthread context.
 238  */
 239 struct ipc_mem_channel {
 240         int channel_id;
 241         enum ipc_ctype ctype;
 242         int index;
 243         struct ipc_pipe ul_pipe;
 244         struct ipc_pipe dl_pipe;
 245         int if_id;
 246         u32 net_err_count;
 247         enum ipc_channel_state state;
 248         struct completion ul_sem;
 249         struct sk_buff_head ul_list;
 250 };
 251
 252 /**
 253  * enum ipc_phase - Different AP and CP phases.
 254  *                  The enums defined after "IPC_P_ROM" and before
 255  *                  "IPC_P_RUN" indicates the operating state where CP can
 256  *                  respond to any requests. So while introducing new phase
 257  *                  this shall be taken into consideration.
 258  * @IPC_P_OFF:          On host PC, the PCIe device link settings are known
 259  *                      about the combined power on. PC is running, the driver
 260  *                      is loaded and CP is in power off mode. The PCIe bus
 261  *                      driver call the device power mode D3hot. In this phase
 262  *                      the driver the polls the device, until the device is in
 263  *                      the power on state and signals the power mode D0.
 264  * @IPC_P_OFF_REQ:      The intermediate phase between cleanup activity starts
 265  *                      and ends.
 266  * @IPC_P_CRASH:        The phase indicating CP crash
 267  * @IPC_P_CD_READY:     The phase indicating CP core dump is ready
 268  * @IPC_P_ROM:          After power on, CP starts in ROM mode and the IPC ROM
 269  *                      driver is waiting 150 ms for the AP active notification
 270  *                      saved in the PCI link status register.
 271  * @IPC_P_PSI:          Primary signed image download phase
 272  * @IPC_P_EBL:          Extended bootloader pahse
 273  * @IPC_P_RUN:          The phase after flashing to RAM is the RUNTIME phase.
 274  */
 275 enum ipc_phase {
 276         IPC_P_OFF,
 277         IPC_P_OFF_REQ,
 278         IPC_P_CRASH,
 279         IPC_P_CD_READY,
 280         IPC_P_ROM,
 281         IPC_P_PSI,
 282         IPC_P_EBL,
 283         IPC_P_RUN,
 284 };
 285
 286 /**
 287  * struct iosm_imem - Current state of the IPC shared memory.
 288  * @mmio:                       mmio instance to access CP MMIO area /
 289  *                              doorbell scratchpad.
 290  * @ipc_protocol:               IPC Protocol instance
 291  * @ipc_task:                   Task for entry into ipc task queue
 292  * @wwan:                       WWAN device pointer
 293  * @mux:                        IP Data multiplexing state.
 294  * @sio:                        IPC SIO data structure pointer
 295  * @ipc_port:                   IPC PORT data structure pointer
 296  * @pcie:                       IPC PCIe
 297  * @trace:                      IPC trace data structure pointer
 298  * @dev:                        Pointer to device structure
 299  * @ipc_requested_state:        Expected IPC state on CP.
 300  * @channels:                   Channel list with UL/DL pipe pairs.
 301  * @ipc_devlink:                IPC Devlink data structure pointer
 302  * @ipc_status:                 local ipc_status
 303  * @nr_of_channels:             number of configured channels
 304  * @startup_timer:              startup timer for NAND support.
 305  * @hrtimer_period:             Hr timer period
 306  * @tdupdate_timer:             Delay the TD update doorbell.
 307  * @fast_update_timer:          forced head pointer update delay timer.
 308  * @td_alloc_timer:             Timer for DL pipe TD allocation retry
 309  * @adb_timer:                  Timer for finishing the ADB.
 310  * @rom_exit_code:              Mapped boot rom exit code.
 311  * @enter_runtime:              1 means the transition to runtime phase was
 312  *                              executed.
 313  * @ul_pend_sem:                Semaphore to wait/complete of UL TDs
 314  *                              before closing pipe.
 315  * @app_notify_ul_pend:         Signal app if UL TD is pending
 316  * @dl_pend_sem:                Semaphore to wait/complete of DL TDs
 317  *                              before closing pipe.
 318  * @app_notify_dl_pend:         Signal app if DL TD is pending
 319  * @phase:                      Operating phase like runtime.
 320  * @pci_device_id:              Device ID
 321  * @cp_version:                 CP version
 322  * @device_sleep:               Device sleep state
 323  * @run_state_worker:           Pointer to worker component for device
 324  *                              setup operations to be called when modem
 325  *                              reaches RUN state
 326  * @ev_irq_pending:             0 means inform the IPC tasklet to
 327  *                              process the irq actions.
 328  * @flag:                       Flag to monitor the state of driver
 329  * @td_update_timer_suspended:  if true then td update timer suspend
 330  * @ev_mux_net_transmit_pending:0 means inform the IPC tasklet to pass
 331  * @reset_det_n:                Reset detect flag
 332  * @pcie_wake_n:                Pcie wake flag
 333  * @debugfs_wwan_dir:           WWAN Debug FS directory entry
 334  * @debugfs_dir:                Debug FS directory for driver-specific entries
 335  */
 336 struct iosm_imem {
 337         struct iosm_mmio *mmio;
 338         struct iosm_protocol *ipc_protocol;
 339         struct ipc_task *ipc_task;
 340         struct iosm_wwan *wwan;
 341         struct iosm_mux *mux;
 342         struct iosm_cdev *ipc_port[IPC_MEM_MAX_CHANNELS];
 343         struct iosm_pcie *pcie;
 344 #ifdef CONFIG_WWAN_DEBUGFS
 345         struct iosm_trace *trace;
 346 #endif
 347         struct device *dev;
 348         enum ipc_mem_device_ipc_state ipc_requested_state;
 349         struct ipc_mem_channel channels[IPC_MEM_MAX_CHANNELS];
 350         struct iosm_devlink *ipc_devlink;
 351         u32 ipc_status;
 352         u32 nr_of_channels;
 353         struct hrtimer startup_timer;
 354         ktime_t hrtimer_period;
 355         struct hrtimer tdupdate_timer;
 356         struct hrtimer fast_update_timer;
 357         struct hrtimer td_alloc_timer;
 358         struct hrtimer adb_timer;
 359         enum rom_exit_code rom_exit_code;
 360         u32 enter_runtime;
 361         struct completion ul_pend_sem;
 362         u32 app_notify_ul_pend;
 363         struct completion dl_pend_sem;
 364         u32 app_notify_dl_pend;
 365         enum ipc_phase phase;
 366         u16 pci_device_id;
 367         int cp_version;
 368         int device_sleep;
 369         struct work_struct run_state_worker;
 370         u8 ev_irq_pending[IPC_IRQ_VECTORS];
 371         unsigned long flag;
 372         u8 td_update_timer_suspended:1,
 373            ev_mux_net_transmit_pending:1,
 374            reset_det_n:1,
 375            pcie_wake_n:1;
 376 #ifdef CONFIG_WWAN_DEBUGFS
 377         struct dentry *debugfs_wwan_dir;
 378         struct dentry *debugfs_dir;
 379 #endif
 380 };
 381
 382 /**
 383  * ipc_imem_init - Initialize the shared memory region
 384  * @pcie:       Pointer to core driver data-struct
 385  * @device_id:  PCI device ID
 386  * @mmio:       Pointer to the mmio area
 387  * @dev:        Pointer to device structure
 388  *
 389  * Returns:  Initialized imem pointer on success else NULL
 390  */
 391 struct iosm_imem *ipc_imem_init(struct iosm_pcie *pcie, unsigned int device_id,
 392                                 void __iomem *mmio, struct device *dev);
 393
 394 /**
 395  * ipc_imem_pm_s2idle_sleep - Set PM variables to sleep/active for
 396  *                            s2idle sleep/active
 397  * @ipc_imem:   Pointer to imem data-struct
 398  * @sleep:      Set PM Variable to sleep/active
 399  */
 400 void ipc_imem_pm_s2idle_sleep(struct iosm_imem *ipc_imem, bool sleep);
 401
 402 /**
 403  * ipc_imem_pm_suspend - The HAL shall ask the shared memory layer
 404  *                       whether D3 is allowed.
 405  * @ipc_imem:   Pointer to imem data-struct
 406  */
 407 void ipc_imem_pm_suspend(struct iosm_imem *ipc_imem);
 408
 409 /**
 410  * ipc_imem_pm_resume - The HAL shall inform the shared memory layer
 411  *                      that the device is active.
 412  * @ipc_imem:   Pointer to imem data-struct
 413  */
 414 void ipc_imem_pm_resume(struct iosm_imem *ipc_imem);
 415
 416 /**
 417  * ipc_imem_cleanup -   Inform CP and free the shared memory resources.
 418  * @ipc_imem:   Pointer to imem data-struct
 419  */
 420 void ipc_imem_cleanup(struct iosm_imem *ipc_imem);
 421
 422 /**
 423  * ipc_imem_irq_process - Shift the IRQ actions to the IPC thread.
 424  * @ipc_imem:   Pointer to imem data-struct
 425  * @irq:        Irq number
 426  */
 427 void ipc_imem_irq_process(struct iosm_imem *ipc_imem, int irq);
 428
 429 /**
 430  * imem_get_device_sleep_state - Get the device sleep state value.
 431  * @ipc_imem:   Pointer to imem instance
 432  *
 433  * Returns: device sleep state
 434  */
 435 int imem_get_device_sleep_state(struct iosm_imem *ipc_imem);
 436
 437 /**
 438  * ipc_imem_td_update_timer_suspend - Updates the TD Update Timer suspend flag.
 439  * @ipc_imem:   Pointer to imem data-struct
 440  * @suspend:    Flag to update. If TRUE then HP update doorbell is triggered to
 441  *              device without any wait. If FALSE then HP update doorbell is
 442  *              delayed until timeout.
 443  */
 444 void ipc_imem_td_update_timer_suspend(struct iosm_imem *ipc_imem, bool suspend);
 445
 446 /**
 447  * ipc_imem_channel_close - Release the channel resources.
 448  * @ipc_imem:           Pointer to imem data-struct
 449  * @channel_id:         Channel ID to be cleaned up.
 450  */
 451 void ipc_imem_channel_close(struct iosm_imem *ipc_imem, int channel_id);
 452
 453 /**
 454  * ipc_imem_channel_alloc - Reserves a channel
 455  * @ipc_imem:   Pointer to imem data-struct
 456  * @index:      ID to lookup from the preallocated list.
 457  * @ctype:      Channel type.
 458  *
 459  * Returns: Index on success and failure value on error
 460  */
 461 int ipc_imem_channel_alloc(struct iosm_imem *ipc_imem, int index,
 462                            enum ipc_ctype ctype);
 463
 464 /**
 465  * ipc_imem_channel_open - Establish the pipes.
 466  * @ipc_imem:           Pointer to imem data-struct
 467  * @channel_id:         Channel ID returned during alloc.
 468  * @db_id:              Doorbell ID for trigger identifier.
 469  *
 470  * Returns: Pointer of ipc_mem_channel on success and NULL on failure.
 471  */
 472 struct ipc_mem_channel *ipc_imem_channel_open(struct iosm_imem *ipc_imem,
 473                                               int channel_id, u32 db_id);
 474
 475 /**
 476  * ipc_imem_td_update_timer_start - Starts the TD Update Timer if not running.
 477  * @ipc_imem:   Pointer to imem data-struct
 478  */
 479 void ipc_imem_td_update_timer_start(struct iosm_imem *ipc_imem);
 480
 481 /**
 482  * ipc_imem_ul_write_td - Pass the channel UL list to protocol layer for TD
 483  *                    preparation and sending them to the device.
 484  * @ipc_imem:   Pointer to imem data-struct
 485  *
 486  * Returns: TRUE of HP Doorbell trigger is pending. FALSE otherwise.
 487  */
 488 bool ipc_imem_ul_write_td(struct iosm_imem *ipc_imem);
 489
 490 /**
 491  * ipc_imem_ul_send - Dequeue SKB from channel list and start with
 492  *                the uplink transfer.If HP Doorbell is pending to be
 493  *                triggered then starts the TD Update Timer.
 494  * @ipc_imem:   Pointer to imem data-struct
 495  */
 496 void ipc_imem_ul_send(struct iosm_imem *ipc_imem);
 497
 498 /**
 499  * ipc_imem_channel_update - Set or modify pipe config of an existing channel
 500  * @ipc_imem:           Pointer to imem data-struct
 501  * @id:                 Channel config index
 502  * @chnl_cfg:           Channel config struct
 503  * @irq_moderation:     Timer in usec for irq_moderation
 504  */
 505 void ipc_imem_channel_update(struct iosm_imem *ipc_imem, int id,
 506                              struct ipc_chnl_cfg chnl_cfg, u32 irq_moderation);
 507
 508 /**
 509  * ipc_imem_channel_free -Free an IPC channel.
 510  * @channel:    Channel to be freed
 511  */
 512 void ipc_imem_channel_free(struct ipc_mem_channel *channel);
 513
 514 /**
 515  * ipc_imem_hrtimer_stop - Stop the hrtimer
 516  * @hr_timer:   Pointer to hrtimer instance
 517  */
 518 void ipc_imem_hrtimer_stop(struct hrtimer *hr_timer);
 519
 520 /**
 521  * ipc_imem_pipe_cleanup - Reset volatile pipe content for all channels
 522  * @ipc_imem:   Pointer to imem data-struct
 523  * @pipe:       Pipe to cleaned up
 524  */
 525 void ipc_imem_pipe_cleanup(struct iosm_imem *ipc_imem, struct ipc_pipe *pipe);
 526
 527 /**
 528  * ipc_imem_pipe_close - Send msg to device to close pipe
 529  * @ipc_imem:   Pointer to imem data-struct
 530  * @pipe:       Pipe to be closed
 531  */
 532 void ipc_imem_pipe_close(struct iosm_imem *ipc_imem, struct ipc_pipe *pipe);
 533
 534 /**
 535  * ipc_imem_phase_update - Get the CP execution state
 536  *                        and map it to the AP phase.
 537  * @ipc_imem:   Pointer to imem data-struct
 538  *
 539  * Returns: Current ap updated phase
 540  */
 541 enum ipc_phase ipc_imem_phase_update(struct iosm_imem *ipc_imem);
 542
 543 /**
 544  * ipc_imem_phase_get_string - Return the current operation
 545  *                           phase as string.
 546  * @phase:      AP phase
 547  *
 548  * Returns: AP phase string
 549  */
 550 const char *ipc_imem_phase_get_string(enum ipc_phase phase);
 551
 552 /**
 553  * ipc_imem_msg_send_feature_set - Send feature set message to modem
 554  * @ipc_imem:           Pointer to imem data-struct
 555  * @reset_enable:       0 = out-of-band, 1 = in-band-crash notification
 556  * @atomic_ctx:         if disabled call in tasklet context
 557  *
 558  */
 559 void ipc_imem_msg_send_feature_set(struct iosm_imem *ipc_imem,
 560                                    unsigned int reset_enable, bool atomic_ctx);
 561
 562 /**
 563  * ipc_imem_ipc_init_check - Send the init event to CP, wait a certain time and
 564  *                           set CP to runtime with the context information
 565  * @ipc_imem:   Pointer to imem data-struct
 566  */
 567 void ipc_imem_ipc_init_check(struct iosm_imem *ipc_imem);
 568
 569 /**
 570  * ipc_imem_channel_init - Initialize the channel list with UL/DL pipe pairs.
 571  * @ipc_imem:           Pointer to imem data-struct
 572  * @ctype:              Channel type
 573  * @chnl_cfg:           Channel configuration struct
 574  * @irq_moderation:     Timer in usec for irq_moderation
 575  */
 576 void ipc_imem_channel_init(struct iosm_imem *ipc_imem, enum ipc_ctype ctype,
 577                            struct ipc_chnl_cfg chnl_cfg, u32 irq_moderation);
 578
 579 /**
 580  * ipc_imem_devlink_trigger_chip_info - Inform devlink that the chip
 581  *                                      information are available if the
 582  *                                      flashing to RAM interworking shall be
 583  *                                      executed.
 584  * @ipc_imem:   Pointer to imem structure
 585  *
 586  * Returns: 0 on success, -1 on failure
 587  */
 588 int ipc_imem_devlink_trigger_chip_info(struct iosm_imem *ipc_imem);
 589
 590 void ipc_imem_adb_timer_start(struct iosm_imem *ipc_imem);
 591
 592 #endif