drivers/net/wireless/ralink/rt2x00/rt2800lib.c

   1 /*
   2         Copyright (C) 2010 Willow Garage <http://www.willowgarage.com>
   3         Copyright (C) 2010 Ivo van Doorn <IvDoorn@gmail.com>
   4         Copyright (C) 2009 Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
   5         Copyright (C) 2009 Gertjan van Wingerde <gwingerde@gmail.com>
   6
   7         Based on the original rt2800pci.c and rt2800usb.c.
   8           Copyright (C) 2009 Alban Browaeys <prahal@yahoo.com>
   9           Copyright (C) 2009 Felix Fietkau <nbd@openwrt.org>
  10           Copyright (C) 2009 Luis Correia <luis.f.correia@gmail.com>
  11           Copyright (C) 2009 Mattias Nissler <mattias.nissler@gmx.de>
  12           Copyright (C) 2009 Mark Asselstine <asselsm@gmail.com>
  13           Copyright (C) 2009 Xose Vazquez Perez <xose.vazquez@gmail.com>
  14           <http://rt2x00.serialmonkey.com>
  15
  16         This program is free software; you can redistribute it and/or modify
  17         it under the terms of the GNU General Public License as published by
  18         the Free Software Foundation; either version 2 of the License, or
  19         (at your option) any later version.
  20
  21         This program is distributed in the hope that it will be useful,
  22         but WITHOUT ANY WARRANTY; without even the implied warranty of
  23         MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
  24         GNU General Public License for more details.
  25
  26         You should have received a copy of the GNU General Public License
  27         along with this program; if not, see <http://www.gnu.org/licenses/>.
  28  */
  29
  30 /*
  31         Module: rt2800lib
  32         Abstract: rt2800 generic device routines.
  33  */
  34
  35 #include <linux/crc-ccitt.h>
  36 #include <linux/kernel.h>
  37 #include <linux/module.h>
  38 #include <linux/slab.h>
  39
  40 #include "rt2x00.h"
  41 #include "rt2800lib.h"
  42 #include "rt2800.h"
  43
  44 /*
  45  * Register access.
  46  * All access to the CSR registers will go through the methods
  47  * rt2800_register_read and rt2800_register_write.
  48  * BBP and RF register require indirect register access,
  49  * and use the CSR registers BBPCSR and RFCSR to achieve this.
  50  * These indirect registers work with busy bits,
  51  * and we will try maximal REGISTER_BUSY_COUNT times to access
  52  * the register while taking a REGISTER_BUSY_DELAY us delay
  53  * between each attampt. When the busy bit is still set at that time,
  54  * the access attempt is considered to have failed,
  55  * and we will print an error.
  56  * The _lock versions must be used if you already hold the csr_mutex
  57  */
  58 #define WAIT_FOR_BBP(__dev, __reg) \
  59         rt2800_regbusy_read((__dev), BBP_CSR_CFG, BBP_CSR_CFG_BUSY, (__reg))
  60 #define WAIT_FOR_RFCSR(__dev, __reg) \
  61         rt2800_regbusy_read((__dev), RF_CSR_CFG, RF_CSR_CFG_BUSY, (__reg))
  62 #define WAIT_FOR_RFCSR_MT7620(__dev, __reg) \
  63         rt2800_regbusy_read((__dev), RF_CSR_CFG, RF_CSR_CFG_BUSY_MT7620, \
  64                             (__reg))
  65 #define WAIT_FOR_RF(__dev, __reg) \
  66         rt2800_regbusy_read((__dev), RF_CSR_CFG0, RF_CSR_CFG0_BUSY, (__reg))
  67 #define WAIT_FOR_MCU(__dev, __reg) \
  68         rt2800_regbusy_read((__dev), H2M_MAILBOX_CSR, \
  69                             H2M_MAILBOX_CSR_OWNER, (__reg))
  70
  71 static inline bool rt2800_is_305x_soc(struct rt2x00_dev *rt2x00dev)
  72 {
  73         /* check for rt2872 on SoC */
  74         if (!rt2x00_is_soc(rt2x00dev) ||
  75             !rt2x00_rt(rt2x00dev, RT2872))
  76                 return false;
  77
  78         /* we know for sure that these rf chipsets are used on rt305x boards */
  79         if (rt2x00_rf(rt2x00dev, RF3020) ||
  80             rt2x00_rf(rt2x00dev, RF3021) ||
  81             rt2x00_rf(rt2x00dev, RF3022))
  82                 return true;
  83
  84         rt2x00_warn(rt2x00dev, "Unknown RF chipset on rt305x\n");
  85         return false;
  86 }
  87
  88 static void rt2800_bbp_write(struct rt2x00_dev *rt2x00dev,
  89                              const unsigned int word, const u8 value)
  90 {
  91         u32 reg;
  92
  93         mutex_lock(&rt2x00dev->csr_mutex);
  94
  95         /*
  96          * Wait until the BBP becomes available, afterwards we
  97          * can safely write the new data into the register.
  98          */
  99         if (WAIT_FOR_BBP(rt2x00dev, &reg)) {
 100                 reg = 0;
 101                 rt2x00_set_field32(&reg, BBP_CSR_CFG_VALUE, value);
 102                 rt2x00_set_field32(&reg, BBP_CSR_CFG_REGNUM, word);
 103                 rt2x00_set_field32(&reg, BBP_CSR_CFG_BUSY, 1);
 104                 rt2x00_set_field32(&reg, BBP_CSR_CFG_READ_CONTROL, 0);
 105                 rt2x00_set_field32(&reg, BBP_CSR_CFG_BBP_RW_MODE, 1);
 106
 107                 rt2800_register_write_lock(rt2x00dev, BBP_CSR_CFG, reg);
 108         }
 109
 110         mutex_unlock(&rt2x00dev->csr_mutex);
 111 }
 112
 113 static u8 rt2800_bbp_read(struct rt2x00_dev *rt2x00dev, const unsigned int word)
 114 {
 115         u32 reg;
 116         u8 value;
 117
 118         mutex_lock(&rt2x00dev->csr_mutex);
 119
 120         /*
 121          * Wait until the BBP becomes available, afterwards we
 122          * can safely write the read request into the register.
 123          * After the data has been written, we wait until hardware
 124          * returns the correct value, if at any time the register
 125          * doesn't become available in time, reg will be 0xffffffff
 126          * which means we return 0xff to the caller.
 127          */
 128         if (WAIT_FOR_BBP(rt2x00dev, &reg)) {
 129                 reg = 0;
 130                 rt2x00_set_field32(&reg, BBP_CSR_CFG_REGNUM, word);
 131                 rt2x00_set_field32(&reg, BBP_CSR_CFG_BUSY, 1);
 132                 rt2x00_set_field32(&reg, BBP_CSR_CFG_READ_CONTROL, 1);
 133                 rt2x00_set_field32(&reg, BBP_CSR_CFG_BBP_RW_MODE, 1);
 134
 135                 rt2800_register_write_lock(rt2x00dev, BBP_CSR_CFG, reg);
 136
 137                 WAIT_FOR_BBP(rt2x00dev, &reg);
 138         }
 139
 140         value = rt2x00_get_field32(reg, BBP_CSR_CFG_VALUE);
 141
 142         mutex_unlock(&rt2x00dev->csr_mutex);
 143
 144         return value;
 145 }
 146
 147 static void rt2800_rfcsr_write(struct rt2x00_dev *rt2x00dev,
 148                                const unsigned int word, const u8 value)
 149 {
 150         u32 reg;
 151
 152         mutex_lock(&rt2x00dev->csr_mutex);
 153
 154         /*
 155          * Wait until the RFCSR becomes available, afterwards we
 156          * can safely write the new data into the register.
 157          */
 158         switch (rt2x00dev->chip.rt) {
 159         case RT6352:
 160                 if (WAIT_FOR_RFCSR_MT7620(rt2x00dev, &reg)) {
 161                         reg = 0;
 162                         rt2x00_set_field32(&reg, RF_CSR_CFG_DATA_MT7620, value);
 163                         rt2x00_set_field32(&reg, RF_CSR_CFG_REGNUM_MT7620,
 164                                            word);
 165                         rt2x00_set_field32(&reg, RF_CSR_CFG_WRITE_MT7620, 1);
 166                         rt2x00_set_field32(&reg, RF_CSR_CFG_BUSY_MT7620, 1);
 167
 168                         rt2800_register_write_lock(rt2x00dev, RF_CSR_CFG, reg);
 169                 }
 170                 break;
 171
 172         default:
 173                 if (WAIT_FOR_RFCSR(rt2x00dev, &reg)) {
 174                         reg = 0;
 175                         rt2x00_set_field32(&reg, RF_CSR_CFG_DATA, value);
 176                         rt2x00_set_field32(&reg, RF_CSR_CFG_REGNUM, word);
 177                         rt2x00_set_field32(&reg, RF_CSR_CFG_WRITE, 1);
 178                         rt2x00_set_field32(&reg, RF_CSR_CFG_BUSY, 1);
 179
 180                         rt2800_register_write_lock(rt2x00dev, RF_CSR_CFG, reg);
 181                 }
 182                 break;
 183         }
 184
 185         mutex_unlock(&rt2x00dev->csr_mutex);
 186 }
 187
 188 static void rt2800_rfcsr_write_bank(struct rt2x00_dev *rt2x00dev, const u8 bank,
 189                                     const unsigned int reg, const u8 value)
 190 {
 191         rt2800_rfcsr_write(rt2x00dev, (reg | (bank << 6)), value);
 192 }
 193
 194 static void rt2800_rfcsr_write_chanreg(struct rt2x00_dev *rt2x00dev,
 195                                        const unsigned int reg, const u8 value)
 196 {
 197         rt2800_rfcsr_write_bank(rt2x00dev, 4, reg, value);
 198         rt2800_rfcsr_write_bank(rt2x00dev, 6, reg, value);
 199 }
 200
 201 static void rt2800_rfcsr_write_dccal(struct rt2x00_dev *rt2x00dev,
 202                                      const unsigned int reg, const u8 value)
 203 {
 204         rt2800_rfcsr_write_bank(rt2x00dev, 5, reg, value);
 205         rt2800_rfcsr_write_bank(rt2x00dev, 7, reg, value);
 206 }
 207
 208 static u8 rt2800_rfcsr_read(struct rt2x00_dev *rt2x00dev,
 209                             const unsigned int word)
 210 {
 211         u32 reg;
 212         u8 value;
 213
 214         mutex_lock(&rt2x00dev->csr_mutex);
 215
 216         /*
 217          * Wait until the RFCSR becomes available, afterwards we
 218          * can safely write the read request into the register.
 219          * After the data has been written, we wait until hardware
 220          * returns the correct value, if at any time the register
 221          * doesn't become available in time, reg will be 0xffffffff
 222          * which means we return 0xff to the caller.
 223          */
 224         switch (rt2x00dev->chip.rt) {
 225         case RT6352:
 226                 if (WAIT_FOR_RFCSR_MT7620(rt2x00dev, &reg)) {
 227                         reg = 0;
 228                         rt2x00_set_field32(&reg, RF_CSR_CFG_REGNUM_MT7620,
 229                                            word);
 230                         rt2x00_set_field32(&reg, RF_CSR_CFG_WRITE_MT7620, 0);
 231                         rt2x00_set_field32(&reg, RF_CSR_CFG_BUSY_MT7620, 1);
 232
 233                         rt2800_register_write_lock(rt2x00dev, RF_CSR_CFG, reg);
 234
 235                         WAIT_FOR_RFCSR_MT7620(rt2x00dev, &reg);
 236                 }
 237
 238                 value = rt2x00_get_field32(reg, RF_CSR_CFG_DATA_MT7620);
 239                 break;
 240
 241         default:
 242                 if (WAIT_FOR_RFCSR(rt2x00dev, &reg)) {
 243                         reg = 0;
 244                         rt2x00_set_field32(&reg, RF_CSR_CFG_REGNUM, word);
 245                         rt2x00_set_field32(&reg, RF_CSR_CFG_WRITE, 0);
 246                         rt2x00_set_field32(&reg, RF_CSR_CFG_BUSY, 1);
 247
 248                         rt2800_register_write_lock(rt2x00dev, RF_CSR_CFG, reg);
 249
 250                         WAIT_FOR_RFCSR(rt2x00dev, &reg);
 251                 }
 252
 253                 value = rt2x00_get_field32(reg, RF_CSR_CFG_DATA);
 254                 break;
 255         }
 256
 257         mutex_unlock(&rt2x00dev->csr_mutex);
 258
 259         return value;
 260 }
 261
 262 static u8 rt2800_rfcsr_read_bank(struct rt2x00_dev *rt2x00dev, const u8 bank,
 263                                  const unsigned int reg)
 264 {
 265         return rt2800_rfcsr_read(rt2x00dev, (reg | (bank << 6)));
 266 }
 267
 268 static void rt2800_rf_write(struct rt2x00_dev *rt2x00dev,
 269                             const unsigned int word, const u32 value)
 270 {
 271         u32 reg;
 272
 273         mutex_lock(&rt2x00dev->csr_mutex);
 274
 275         /*
 276          * Wait until the RF becomes available, afterwards we
 277          * can safely write the new data into the register.
 278          */
 279         if (WAIT_FOR_RF(rt2x00dev, &reg)) {
 280                 reg = 0;
 281                 rt2x00_set_field32(&reg, RF_CSR_CFG0_REG_VALUE_BW, value);
 282                 rt2x00_set_field32(&reg, RF_CSR_CFG0_STANDBYMODE, 0);
 283                 rt2x00_set_field32(&reg, RF_CSR_CFG0_SEL, 0);
 284                 rt2x00_set_field32(&reg, RF_CSR_CFG0_BUSY, 1);
 285
 286                 rt2800_register_write_lock(rt2x00dev, RF_CSR_CFG0, reg);
 287                 rt2x00_rf_write(rt2x00dev, word, value);
 288         }
 289
 290         mutex_unlock(&rt2x00dev->csr_mutex);
 291 }
 292
 293 static const unsigned int rt2800_eeprom_map[EEPROM_WORD_COUNT] = {
 294         [EEPROM_CHIP_ID]                = 0x0000,
 295         [EEPROM_VERSION]                = 0x0001,
 296         [EEPROM_MAC_ADDR_0]             = 0x0002,
 297         [EEPROM_MAC_ADDR_1]             = 0x0003,
 298         [EEPROM_MAC_ADDR_2]             = 0x0004,
 299         [EEPROM_NIC_CONF0]              = 0x001a,
 300         [EEPROM_NIC_CONF1]              = 0x001b,
 301         [EEPROM_FREQ]                   = 0x001d,
 302         [EEPROM_LED_AG_CONF]            = 0x001e,
 303         [EEPROM_LED_ACT_CONF]           = 0x001f,
 304         [EEPROM_LED_POLARITY]           = 0x0020,
 305         [EEPROM_NIC_CONF2]              = 0x0021,
 306         [EEPROM_LNA]                    = 0x0022,
 307         [EEPROM_RSSI_BG]                = 0x0023,
 308         [EEPROM_RSSI_BG2]               = 0x0024,
 309         [EEPROM_TXMIXER_GAIN_BG]        = 0x0024, /* overlaps with RSSI_BG2 */
 310         [EEPROM_RSSI_A]                 = 0x0025,
 311         [EEPROM_RSSI_A2]                = 0x0026,
 312         [EEPROM_TXMIXER_GAIN_A]         = 0x0026, /* overlaps with RSSI_A2 */
 313         [EEPROM_EIRP_MAX_TX_POWER]      = 0x0027,
 314         [EEPROM_TXPOWER_DELTA]          = 0x0028,
 315         [EEPROM_TXPOWER_BG1]            = 0x0029,
 316         [EEPROM_TXPOWER_BG2]            = 0x0030,
 317         [EEPROM_TSSI_BOUND_BG1]         = 0x0037,
 318         [EEPROM_TSSI_BOUND_BG2]         = 0x0038,
 319         [EEPROM_TSSI_BOUND_BG3]         = 0x0039,
 320         [EEPROM_TSSI_BOUND_BG4]         = 0x003a,
 321         [EEPROM_TSSI_BOUND_BG5]         = 0x003b,
 322         [EEPROM_TXPOWER_A1]             = 0x003c,
 323         [EEPROM_TXPOWER_A2]             = 0x0053,
 324         [EEPROM_TXPOWER_INIT]           = 0x0068,
 325         [EEPROM_TSSI_BOUND_A1]          = 0x006a,
 326         [EEPROM_TSSI_BOUND_A2]          = 0x006b,
 327         [EEPROM_TSSI_BOUND_A3]          = 0x006c,
 328         [EEPROM_TSSI_BOUND_A4]          = 0x006d,
 329         [EEPROM_TSSI_BOUND_A5]          = 0x006e,
 330         [EEPROM_TXPOWER_BYRATE]         = 0x006f,
 331         [EEPROM_BBP_START]              = 0x0078,
 332 };
 333
 334 static const unsigned int rt2800_eeprom_map_ext[EEPROM_WORD_COUNT] = {
 335         [EEPROM_CHIP_ID]                = 0x0000,
 336         [EEPROM_VERSION]                = 0x0001,
 337         [EEPROM_MAC_ADDR_0]             = 0x0002,
 338         [EEPROM_MAC_ADDR_1]             = 0x0003,
 339         [EEPROM_MAC_ADDR_2]             = 0x0004,
 340         [EEPROM_NIC_CONF0]              = 0x001a,
 341         [EEPROM_NIC_CONF1]              = 0x001b,
 342         [EEPROM_NIC_CONF2]              = 0x001c,
 343         [EEPROM_EIRP_MAX_TX_POWER]      = 0x0020,
 344         [EEPROM_FREQ]                   = 0x0022,
 345         [EEPROM_LED_AG_CONF]            = 0x0023,
 346         [EEPROM_LED_ACT_CONF]           = 0x0024,
 347         [EEPROM_LED_POLARITY]           = 0x0025,
 348         [EEPROM_LNA]                    = 0x0026,
 349         [EEPROM_EXT_LNA2]               = 0x0027,
 350         [EEPROM_RSSI_BG]                = 0x0028,
 351         [EEPROM_RSSI_BG2]               = 0x0029,
 352         [EEPROM_RSSI_A]                 = 0x002a,
 353         [EEPROM_RSSI_A2]                = 0x002b,
 354         [EEPROM_TXPOWER_BG1]            = 0x0030,
 355         [EEPROM_TXPOWER_BG2]            = 0x0037,
 356         [EEPROM_EXT_TXPOWER_BG3]        = 0x003e,
 357         [EEPROM_TSSI_BOUND_BG1]         = 0x0045,
 358         [EEPROM_TSSI_BOUND_BG2]         = 0x0046,
 359         [EEPROM_TSSI_BOUND_BG3]         = 0x0047,
 360         [EEPROM_TSSI_BOUND_BG4]         = 0x0048,
 361         [EEPROM_TSSI_BOUND_BG5]         = 0x0049,
 362         [EEPROM_TXPOWER_A1]             = 0x004b,
 363         [EEPROM_TXPOWER_A2]             = 0x0065,
 364         [EEPROM_EXT_TXPOWER_A3]         = 0x007f,
 365         [EEPROM_TSSI_BOUND_A1]          = 0x009a,
 366         [EEPROM_TSSI_BOUND_A2]          = 0x009b,
 367         [EEPROM_TSSI_BOUND_A3]          = 0x009c,
 368         [EEPROM_TSSI_BOUND_A4]          = 0x009d,
 369         [EEPROM_TSSI_BOUND_A5]          = 0x009e,
 370         [EEPROM_TXPOWER_BYRATE]         = 0x00a0,
 371 };
 372
 373 static unsigned int rt2800_eeprom_word_index(struct rt2x00_dev *rt2x00dev,
 374                                              const enum rt2800_eeprom_word word)
 375 {
 376         const unsigned int *map;
 377         unsigned int index;
 378
 379         if (WARN_ONCE(word >= EEPROM_WORD_COUNT,
 380                       "%s: invalid EEPROM word %d\n",
 381                       wiphy_name(rt2x00dev->hw->wiphy), word))
 382                 return 0;
 383
 384         if (rt2x00_rt(rt2x00dev, RT3593))
 385                 map = rt2800_eeprom_map_ext;
 386         else
 387                 map = rt2800_eeprom_map;
 388
 389         index = map[word];
 390
 391         /* Index 0 is valid only for EEPROM_CHIP_ID.
 392          * Otherwise it means that the offset of the
 393          * given word is not initialized in the map,
 394          * or that the field is not usable on the
 395          * actual chipset.
 396          */
 397         WARN_ONCE(word != EEPROM_CHIP_ID && index == 0,
 398                   "%s: invalid access of EEPROM word %d\n",
 399                   wiphy_name(rt2x00dev->hw->wiphy), word);
 400
 401         return index;
 402 }
 403
 404 static void *rt2800_eeprom_addr(struct rt2x00_dev *rt2x00dev,
 405                                 const enum rt2800_eeprom_word word)
 406 {
 407         unsigned int index;
 408
 409         index = rt2800_eeprom_word_index(rt2x00dev, word);
 410         return rt2x00_eeprom_addr(rt2x00dev, index);
 411 }
 412
 413 static u16 rt2800_eeprom_read(struct rt2x00_dev *rt2x00dev,
 414                               const enum rt2800_eeprom_word word)
 415 {
 416         unsigned int index;
 417
 418         index = rt2800_eeprom_word_index(rt2x00dev, word);
 419         return rt2x00_eeprom_read(rt2x00dev, index);
 420 }
 421
 422 static void rt2800_eeprom_write(struct rt2x00_dev *rt2x00dev,
 423                                 const enum rt2800_eeprom_word word, u16 data)
 424 {
 425         unsigned int index;
 426
 427         index = rt2800_eeprom_word_index(rt2x00dev, word);
 428         rt2x00_eeprom_write(rt2x00dev, index, data);
 429 }
 430
 431 static u16 rt2800_eeprom_read_from_array(struct rt2x00_dev *rt2x00dev,
 432                                          const enum rt2800_eeprom_word array,
 433                                          unsigned int offset)
 434 {
 435         unsigned int index;
 436
 437         index = rt2800_eeprom_word_index(rt2x00dev, array);
 438         return rt2x00_eeprom_read(rt2x00dev, index + offset);
 439 }
 440
 441 static int rt2800_enable_wlan_rt3290(struct rt2x00_dev *rt2x00dev)
 442 {
 443         u32 reg;
 444         int i, count;
 445
 446         reg = rt2800_register_read(rt2x00dev, WLAN_FUN_CTRL);
 447         rt2x00_set_field32(&reg, WLAN_GPIO_OUT_OE_BIT_ALL, 0xff);
 448         rt2x00_set_field32(&reg, FRC_WL_ANT_SET, 1);
 449         rt2x00_set_field32(&reg, WLAN_CLK_EN, 0);
 450         rt2x00_set_field32(&reg, WLAN_EN, 1);
 451         rt2800_register_write(rt2x00dev, WLAN_FUN_CTRL, reg);
 452
 453         udelay(REGISTER_BUSY_DELAY);
 454
 455         count = 0;
 456         do {
 457                 /*
 458                  * Check PLL_LD & XTAL_RDY.
 459                  */
 460                 for (i = 0; i < REGISTER_BUSY_COUNT; i++) {
 461                         reg = rt2800_register_read(rt2x00dev, CMB_CTRL);
 462                         if (rt2x00_get_field32(reg, PLL_LD) &&
 463                             rt2x00_get_field32(reg, XTAL_RDY))
 464                                 break;
 465                         udelay(REGISTER_BUSY_DELAY);
 466                 }
 467
 468                 if (i >= REGISTER_BUSY_COUNT) {
 469
 470                         if (count >= 10)
 471                                 return -EIO;
 472
 473                         rt2800_register_write(rt2x00dev, 0x58, 0x018);
 474                         udelay(REGISTER_BUSY_DELAY);
 475                         rt2800_register_write(rt2x00dev, 0x58, 0x418);
 476                         udelay(REGISTER_BUSY_DELAY);
 477                         rt2800_register_write(rt2x00dev, 0x58, 0x618);
 478                         udelay(REGISTER_BUSY_DELAY);
 479                         count++;
 480                 } else {
 481                         count = 0;
 482                 }
 483
 484                 reg = rt2800_register_read(rt2x00dev, WLAN_FUN_CTRL);
 485                 rt2x00_set_field32(&reg, PCIE_APP0_CLK_REQ, 0);
 486                 rt2x00_set_field32(&reg, WLAN_CLK_EN, 1);
 487                 rt2x00_set_field32(&reg, WLAN_RESET, 1);
 488                 rt2800_register_write(rt2x00dev, WLAN_FUN_CTRL, reg);
 489                 udelay(10);
 490                 rt2x00_set_field32(&reg, WLAN_RESET, 0);
 491                 rt2800_register_write(rt2x00dev, WLAN_FUN_CTRL, reg);
 492                 udelay(10);
 493                 rt2800_register_write(rt2x00dev, INT_SOURCE_CSR, 0x7fffffff);
 494         } while (count != 0);
 495
 496         return 0;
 497 }
 498
 499 void rt2800_mcu_request(struct rt2x00_dev *rt2x00dev,
 500                         const u8 command, const u8 token,
 501                         const u8 arg0, const u8 arg1)
 502 {
 503         u32 reg;
 504
 505         /*
 506          * SOC devices don't support MCU requests.
 507          */
 508         if (rt2x00_is_soc(rt2x00dev))
 509                 return;
 510
 511         mutex_lock(&rt2x00dev->csr_mutex);
 512
 513         /*
 514          * Wait until the MCU becomes available, afterwards we
 515          * can safely write the new data into the register.
 516          */
 517         if (WAIT_FOR_MCU(rt2x00dev, &reg)) {
 518                 rt2x00_set_field32(&reg, H2M_MAILBOX_CSR_OWNER, 1);
 519                 rt2x00_set_field32(&reg, H2M_MAILBOX_CSR_CMD_TOKEN, token);
 520                 rt2x00_set_field32(&reg, H2M_MAILBOX_CSR_ARG0, arg0);
 521                 rt2x00_set_field32(&reg, H2M_MAILBOX_CSR_ARG1, arg1);
 522                 rt2800_register_write_lock(rt2x00dev, H2M_MAILBOX_CSR, reg);
 523
 524                 reg = 0;
 525                 rt2x00_set_field32(&reg, HOST_CMD_CSR_HOST_COMMAND, command);
 526                 rt2800_register_write_lock(rt2x00dev, HOST_CMD_CSR, reg);
 527         }
 528
 529         mutex_unlock(&rt2x00dev->csr_mutex);
 530 }
 531 EXPORT_SYMBOL_GPL(rt2800_mcu_request);
 532
 533 int rt2800_wait_csr_ready(struct rt2x00_dev *rt2x00dev)
 534 {
 535         unsigned int i = 0;
 536         u32 reg;
 537
 538         for (i = 0; i < REGISTER_BUSY_COUNT; i++) {
 539                 reg = rt2800_register_read(rt2x00dev, MAC_CSR0);
 540                 if (reg && reg != ~0)
 541                         return 0;
 542                 msleep(1);
 543         }
 544
 545         rt2x00_err(rt2x00dev, "Unstable hardware\n");
 546         return -EBUSY;
 547 }
 548 EXPORT_SYMBOL_GPL(rt2800_wait_csr_ready);
 549
 550 int rt2800_wait_wpdma_ready(struct rt2x00_dev *rt2x00dev)
 551 {
 552         unsigned int i;
 553         u32 reg;
 554
 555         /*
 556          * Some devices are really slow to respond here. Wait a whole second
 557          * before timing out.
 558          */
 559         for (i = 0; i < REGISTER_BUSY_COUNT; i++) {
 560                 reg = rt2800_register_read(rt2x00dev, WPDMA_GLO_CFG);
 561                 if (!rt2x00_get_field32(reg, WPDMA_GLO_CFG_TX_DMA_BUSY) &&
 562                     !rt2x00_get_field32(reg, WPDMA_GLO_CFG_RX_DMA_BUSY))
 563                         return 0;
 564
 565                 msleep(10);
 566         }
 567
 568         rt2x00_err(rt2x00dev, "WPDMA TX/RX busy [0x%08x]\n", reg);
 569         return -EACCES;
 570 }
 571 EXPORT_SYMBOL_GPL(rt2800_wait_wpdma_ready);
 572
 573 void rt2800_disable_wpdma(struct rt2x00_dev *rt2x00dev)
 574 {
 575         u32 reg;
 576
 577         reg = rt2800_register_read(rt2x00dev, WPDMA_GLO_CFG);
 578         rt2x00_set_field32(&reg, WPDMA_GLO_CFG_ENABLE_TX_DMA, 0);
 579         rt2x00_set_field32(&reg, WPDMA_GLO_CFG_TX_DMA_BUSY, 0);
 580         rt2x00_set_field32(&reg, WPDMA_GLO_CFG_ENABLE_RX_DMA, 0);
 581         rt2x00_set_field32(&reg, WPDMA_GLO_CFG_RX_DMA_BUSY, 0);
 582         rt2x00_set_field32(&reg, WPDMA_GLO_CFG_TX_WRITEBACK_DONE, 1);
 583         rt2800_register_write(rt2x00dev, WPDMA_GLO_CFG, reg);
 584 }
 585 EXPORT_SYMBOL_GPL(rt2800_disable_wpdma);
 586
 587 void rt2800_get_txwi_rxwi_size(struct rt2x00_dev *rt2x00dev,
 588                                unsigned short *txwi_size,
 589                                unsigned short *rxwi_size)
 590 {
 591         switch (rt2x00dev->chip.rt) {
 592         case RT3593:
 593                 *txwi_size = TXWI_DESC_SIZE_4WORDS;
 594                 *rxwi_size = RXWI_DESC_SIZE_5WORDS;
 595                 break;
 596
 597         case RT5592:
 598         case RT6352:
 599                 *txwi_size = TXWI_DESC_SIZE_5WORDS;
 600                 *rxwi_size = RXWI_DESC_SIZE_6WORDS;
 601                 break;
 602
 603         default:
 604                 *txwi_size = TXWI_DESC_SIZE_4WORDS;
 605                 *rxwi_size = RXWI_DESC_SIZE_4WORDS;
 606                 break;
 607         }
 608 }
 609 EXPORT_SYMBOL_GPL(rt2800_get_txwi_rxwi_size);
 610
 611 static bool rt2800_check_firmware_crc(const u8 *data, const size_t len)
 612 {
 613         u16 fw_crc;
 614         u16 crc;
 615
 616         /*
 617          * The last 2 bytes in the firmware array are the crc checksum itself,
 618          * this means that we should never pass those 2 bytes to the crc
 619          * algorithm.
 620          */
 621         fw_crc = (data[len - 2] << 8 | data[len - 1]);
 622
 623         /*
 624          * Use the crc ccitt algorithm.
 625          * This will return the same value as the legacy driver which
 626          * used bit ordering reversion on the both the firmware bytes
 627          * before input input as well as on the final output.
 628          * Obviously using crc ccitt directly is much more efficient.
 629          */
 630         crc = crc_ccitt(~0, data, len - 2);
 631
 632         /*
 633          * There is a small difference between the crc-itu-t + bitrev and
 634          * the crc-ccitt crc calculation. In the latter method the 2 bytes
 635          * will be swapped, use swab16 to convert the crc to the correct
 636          * value.
 637          */
 638         crc = swab16(crc);
 639
 640         return fw_crc == crc;
 641 }
 642
 643 int rt2800_check_firmware(struct rt2x00_dev *rt2x00dev,
 644                           const u8 *data, const size_t len)
 645 {
 646         size_t offset = 0;
 647         size_t fw_len;
 648         bool multiple;
 649
 650         /*
 651          * PCI(e) & SOC devices require firmware with a length
 652          * of 8kb. USB devices require firmware files with a length
 653          * of 4kb. Certain USB chipsets however require different firmware,
 654          * which Ralink only provides attached to the original firmware
 655          * file. Thus for USB devices, firmware files have a length
 656          * which is a multiple of 4kb. The firmware for rt3290 chip also
 657          * have a length which is a multiple of 4kb.
 658          */
 659         if (rt2x00_is_usb(rt2x00dev) || rt2x00_rt(rt2x00dev, RT3290))
 660                 fw_len = 4096;
 661         else
 662                 fw_len = 8192;
 663
 664         multiple = true;
 665         /*
 666          * Validate the firmware length
 667          */
 668         if (len != fw_len && (!multiple || (len % fw_len) != 0))
 669                 return FW_BAD_LENGTH;
 670
 671         /*
 672          * Check if the chipset requires one of the upper parts
 673          * of the firmware.
 674          */
 675         if (rt2x00_is_usb(rt2x00dev) &&
 676             !rt2x00_rt(rt2x00dev, RT2860) &&
 677             !rt2x00_rt(rt2x00dev, RT2872) &&
 678             !rt2x00_rt(rt2x00dev, RT3070) &&
 679             ((len / fw_len) == 1))
 680                 return FW_BAD_VERSION;
 681
 682         /*
 683          * 8kb firmware files must be checked as if it were
 684          * 2 separate firmware files.
 685          */
 686         while (offset < len) {
 687                 if (!rt2800_check_firmware_crc(data + offset, fw_len))
 688                         return FW_BAD_CRC;
 689
 690                 offset += fw_len;
 691         }
 692
 693         return FW_OK;
 694 }
 695 EXPORT_SYMBOL_GPL(rt2800_check_firmware);
 696
 697 int rt2800_load_firmware(struct rt2x00_dev *rt2x00dev,
 698                          const u8 *data, const size_t len)
 699 {
 700         unsigned int i;
 701         u32 reg;
 702         int retval;
 703
 704         if (rt2x00_rt(rt2x00dev, RT3290)) {
 705                 retval = rt2800_enable_wlan_rt3290(rt2x00dev);
 706                 if (retval)
 707                         return -EBUSY;
 708         }
 709
 710         /*
 711          * If driver doesn't wake up firmware here,
 712          * rt2800_load_firmware will hang forever when interface is up again.
 713          */
 714         rt2800_register_write(rt2x00dev, AUTOWAKEUP_CFG, 0x00000000);
 715
 716         /*
 717          * Wait for stable hardware.
 718          */
 719         if (rt2800_wait_csr_ready(rt2x00dev))
 720                 return -EBUSY;
 721
 722         if (rt2x00_is_pci(rt2x00dev)) {
 723                 if (rt2x00_rt(rt2x00dev, RT3290) ||
 724                     rt2x00_rt(rt2x00dev, RT3572) ||
 725                     rt2x00_rt(rt2x00dev, RT5390) ||
 726                     rt2x00_rt(rt2x00dev, RT5392)) {
 727                         reg = rt2800_register_read(rt2x00dev, AUX_CTRL);
 728                         rt2x00_set_field32(&reg, AUX_CTRL_FORCE_PCIE_CLK, 1);
 729                         rt2x00_set_field32(&reg, AUX_CTRL_WAKE_PCIE_EN, 1);
 730                         rt2800_register_write(rt2x00dev, AUX_CTRL, reg);
 731                 }
 732                 rt2800_register_write(rt2x00dev, PWR_PIN_CFG, 0x00000002);
 733         }
 734
 735         rt2800_disable_wpdma(rt2x00dev);
 736
 737         /*
 738          * Write firmware to the device.
 739          */
 740         rt2800_drv_write_firmware(rt2x00dev, data, len);
 741
 742         /*
 743          * Wait for device to stabilize.
 744          */
 745         for (i = 0; i < REGISTER_BUSY_COUNT; i++) {
 746                 reg = rt2800_register_read(rt2x00dev, PBF_SYS_CTRL);
 747                 if (rt2x00_get_field32(reg, PBF_SYS_CTRL_READY))
 748                         break;
 749                 msleep(1);
 750         }
 751
 752         if (i == REGISTER_BUSY_COUNT) {
 753                 rt2x00_err(rt2x00dev, "PBF system register not ready\n");
 754                 return -EBUSY;
 755         }
 756
 757         /*
 758          * Disable DMA, will be reenabled later when enabling
 759          * the radio.
 760          */
 761         rt2800_disable_wpdma(rt2x00dev);
 762
 763         /*
 764          * Initialize firmware.
 765          */
 766         rt2800_register_write(rt2x00dev, H2M_BBP_AGENT, 0);
 767         rt2800_register_write(rt2x00dev, H2M_MAILBOX_CSR, 0);
 768         if (rt2x00_is_usb(rt2x00dev)) {
 769                 rt2800_register_write(rt2x00dev, H2M_INT_SRC, 0);
 770                 rt2800_mcu_request(rt2x00dev, MCU_BOOT_SIGNAL, 0, 0, 0);
 771         }
 772         msleep(1);
 773
 774         return 0;
 775 }
 776 EXPORT_SYMBOL_GPL(rt2800_load_firmware);
 777
 778 void rt2800_write_tx_data(struct queue_entry *entry,
 779                           struct txentry_desc *txdesc)
 780 {
 781         __le32 *txwi = rt2800_drv_get_txwi(entry);
 782         u32 word;
 783         int i;
 784
 785         /*
 786          * Initialize TX Info descriptor
 787          */
 788         word = rt2x00_desc_read(txwi, 0);
 789         rt2x00_set_field32(&word, TXWI_W0_FRAG,
 790                            test_bit(ENTRY_TXD_MORE_FRAG, &txdesc->flags));
 791         rt2x00_set_field32(&word, TXWI_W0_MIMO_PS,
 792                            test_bit(ENTRY_TXD_HT_MIMO_PS, &txdesc->flags));
 793         rt2x00_set_field32(&word, TXWI_W0_CF_ACK, 0);
 794         rt2x00_set_field32(&word, TXWI_W0_TS,
 795                            test_bit(ENTRY_TXD_REQ_TIMESTAMP, &txdesc->flags));
 796         rt2x00_set_field32(&word, TXWI_W0_AMPDU,
 797                            test_bit(ENTRY_TXD_HT_AMPDU, &txdesc->flags));
 798         rt2x00_set_field32(&word, TXWI_W0_MPDU_DENSITY,
 799                            txdesc->u.ht.mpdu_density);
 800         rt2x00_set_field32(&word, TXWI_W0_TX_OP, txdesc->u.ht.txop);
 801         rt2x00_set_field32(&word, TXWI_W0_MCS, txdesc->u.ht.mcs);
 802         rt2x00_set_field32(&word, TXWI_W0_BW,
 803                            test_bit(ENTRY_TXD_HT_BW_40, &txdesc->flags));
 804         rt2x00_set_field32(&word, TXWI_W0_SHORT_GI,
 805                            test_bit(ENTRY_TXD_HT_SHORT_GI, &txdesc->flags));
 806         rt2x00_set_field32(&word, TXWI_W0_STBC, txdesc->u.ht.stbc);
 807         rt2x00_set_field32(&word, TXWI_W0_PHYMODE, txdesc->rate_mode);
 808         rt2x00_desc_write(txwi, 0, word);
 809
 810         word = rt2x00_desc_read(txwi, 1);
 811         rt2x00_set_field32(&word, TXWI_W1_ACK,
 812                            test_bit(ENTRY_TXD_ACK, &txdesc->flags));
 813         rt2x00_set_field32(&word, TXWI_W1_NSEQ,
 814                            test_bit(ENTRY_TXD_GENERATE_SEQ, &txdesc->flags));
 815         rt2x00_set_field32(&word, TXWI_W1_BW_WIN_SIZE, txdesc->u.ht.ba_size);
 816         rt2x00_set_field32(&word, TXWI_W1_WIRELESS_CLI_ID,
 817                            test_bit(ENTRY_TXD_ENCRYPT, &txdesc->flags) ?
 818                            txdesc->key_idx : txdesc->u.ht.wcid);
 819         rt2x00_set_field32(&word, TXWI_W1_MPDU_TOTAL_BYTE_COUNT,
 820                            txdesc->length);
 821         rt2x00_set_field32(&word, TXWI_W1_PACKETID_QUEUE, entry->queue->qid);
 822         rt2x00_set_field32(&word, TXWI_W1_PACKETID_ENTRY, (entry->entry_idx % 3) + 1);
 823         rt2x00_desc_write(txwi, 1, word);
 824
 825         /*
 826          * Always write 0 to IV/EIV fields (word 2 and 3), hardware will insert
 827          * the IV from the IVEIV register when TXD_W3_WIV is set to 0.
 828          * When TXD_W3_WIV is set to 1 it will use the IV data
 829          * from the descriptor. The TXWI_W1_WIRELESS_CLI_ID indicates which
 830          * crypto entry in the registers should be used to encrypt the frame.
 831          *
 832          * Nulify all remaining words as well, we don't know how to program them.
 833          */
 834         for (i = 2; i < entry->queue->winfo_size / sizeof(__le32); i++)
 835                 _rt2x00_desc_write(txwi, i, 0);
 836 }
 837 EXPORT_SYMBOL_GPL(rt2800_write_tx_data);
 838
 839 static int rt2800_agc_to_rssi(struct rt2x00_dev *rt2x00dev, u32 rxwi_w2)
 840 {
 841         s8 rssi0 = rt2x00_get_field32(rxwi_w2, RXWI_W2_RSSI0);
 842         s8 rssi1 = rt2x00_get_field32(rxwi_w2, RXWI_W2_RSSI1);
 843         s8 rssi2 = rt2x00_get_field32(rxwi_w2, RXWI_W2_RSSI2);
 844         u16 eeprom;
 845         u8 offset0;
 846         u8 offset1;
 847         u8 offset2;
 848
 849         if (rt2x00dev->curr_band == NL80211_BAND_2GHZ) {
 850                 eeprom = rt2800_eeprom_read(rt2x00dev, EEPROM_RSSI_BG);
 851                 offset0 = rt2x00_get_field16(eeprom, EEPROM_RSSI_BG_OFFSET0);
 852                 offset1 = rt2x00_get_field16(eeprom, EEPROM_RSSI_BG_OFFSET1);
 853                 eeprom = rt2800_eeprom_read(rt2x00dev, EEPROM_RSSI_BG2);
 854                 offset2 = rt2x00_get_field16(eeprom, EEPROM_RSSI_BG2_OFFSET2);
 855         } else {
 856                 eeprom = rt2800_eeprom_read(rt2x00dev, EEPROM_RSSI_A);
 857                 offset0 = rt2x00_get_field16(eeprom, EEPROM_RSSI_A_OFFSET0);
 858                 offset1 = rt2x00_get_field16(eeprom, EEPROM_RSSI_A_OFFSET1);
 859                 eeprom = rt2800_eeprom_read(rt2x00dev, EEPROM_RSSI_A2);
 860                 offset2 = rt2x00_get_field16(eeprom, EEPROM_RSSI_A2_OFFSET2);
 861         }
 862
 863         /*
 864          * Convert the value from the descriptor into the RSSI value
 865          * If the value in the descriptor is 0, it is considered invalid
 866          * and the default (extremely low) rssi value is assumed
 867          */
 868         rssi0 = (rssi0) ? (-12 - offset0 - rt2x00dev->lna_gain - rssi0) : -128;
 869         rssi1 = (rssi1) ? (-12 - offset1 - rt2x00dev->lna_gain - rssi1) : -128;
 870         rssi2 = (rssi2) ? (-12 - offset2 - rt2x00dev->lna_gain - rssi2) : -128;
 871
 872         /*
 873          * mac80211 only accepts a single RSSI value. Calculating the
 874          * average doesn't deliver a fair answer either since -60:-60 would
 875          * be considered equally good as -50:-70 while the second is the one
 876          * which gives less energy...
 877          */
 878         rssi0 = max(rssi0, rssi1);
 879         return (int)max(rssi0, rssi2);
 880 }
 881
 882 void rt2800_process_rxwi(struct queue_entry *entry,
 883                          struct rxdone_entry_desc *rxdesc)
 884 {
 885         __le32 *rxwi = (__le32 *) entry->skb->data;
 886         u32 word;
 887
 888         word = rt2x00_desc_read(rxwi, 0);
 889
 890         rxdesc->cipher = rt2x00_get_field32(word, RXWI_W0_UDF);
 891         rxdesc->size = rt2x00_get_field32(word, RXWI_W0_MPDU_TOTAL_BYTE_COUNT);
 892
 893         word = rt2x00_desc_read(rxwi, 1);
 894
 895         if (rt2x00_get_field32(word, RXWI_W1_SHORT_GI))
 896                 rxdesc->enc_flags |= RX_ENC_FLAG_SHORT_GI;
 897
 898         if (rt2x00_get_field32(word, RXWI_W1_BW))
 899                 rxdesc->bw = RATE_INFO_BW_40;
 900
 901         /*
 902          * Detect RX rate, always use MCS as signal type.
 903          */
 904         rxdesc->dev_flags |= RXDONE_SIGNAL_MCS;
 905         rxdesc->signal = rt2x00_get_field32(word, RXWI_W1_MCS);
 906         rxdesc->rate_mode = rt2x00_get_field32(word, RXWI_W1_PHYMODE);
 907
 908         /*
 909          * Mask of 0x8 bit to remove the short preamble flag.
 910          */
 911         if (rxdesc->rate_mode == RATE_MODE_CCK)
 912                 rxdesc->signal &= ~0x8;
 913
 914         word = rt2x00_desc_read(rxwi, 2);
 915
 916         /*
 917          * Convert descriptor AGC value to RSSI value.
 918          */
 919         rxdesc->rssi = rt2800_agc_to_rssi(entry->queue->rt2x00dev, word);
 920         /*
 921          * Remove RXWI descriptor from start of the buffer.
 922          */
 923         skb_pull(entry->skb, entry->queue->winfo_size);
 924 }
 925 EXPORT_SYMBOL_GPL(rt2800_process_rxwi);
 926
 927 static void rt2800_rate_from_status(struct skb_frame_desc *skbdesc,
 928                                     u32 status, enum nl80211_band band)
 929 {
 930         u8 flags = 0;
 931         u8 idx = rt2x00_get_field32(status, TX_STA_FIFO_MCS);
 932
 933         switch (rt2x00_get_field32(status, TX_STA_FIFO_PHYMODE)) {
 934         case RATE_MODE_HT_GREENFIELD:
 935                 flags |= IEEE80211_TX_RC_GREEN_FIELD;
 936                 /* fall through */
 937         case RATE_MODE_HT_MIX:
 938                 flags |= IEEE80211_TX_RC_MCS;
 939                 break;
 940         case RATE_MODE_OFDM:
 941                 if (band == NL80211_BAND_2GHZ)
 942                         idx += 4;
 943                 break;
 944         case RATE_MODE_CCK:
 945                 if (idx >= 8)
 946                         idx -= 8;
 947                 break;
 948         }
 949
 950         if (rt2x00_get_field32(status, TX_STA_FIFO_BW))
 951                 flags |= IEEE80211_TX_RC_40_MHZ_WIDTH;
 952
 953         if (rt2x00_get_field32(status, TX_STA_FIFO_SGI))
 954                 flags |= IEEE80211_TX_RC_SHORT_GI;
 955
 956         skbdesc->tx_rate_idx = idx;
 957         skbdesc->tx_rate_flags = flags;
 958 }
 959
 960 void rt2800_txdone_entry(struct queue_entry *entry, u32 status, __le32 *txwi,
 961                          bool match)
 962 {
 963         struct rt2x00_dev *rt2x00dev = entry->queue->rt2x00dev;
 964         struct rt2800_drv_data *drv_data = rt2x00dev->drv_data;
 965         struct skb_frame_desc *skbdesc = get_skb_frame_desc(entry->skb);
 966         struct txdone_entry_desc txdesc;
 967         u32 word;
 968         u16 mcs, real_mcs;
 969         int aggr, ampdu, wcid, ack_req;
 970
 971         /*
 972          * Obtain the status about this packet.
 973          */
 974         txdesc.flags = 0;
 975         word = rt2x00_desc_read(txwi, 0);
 976
 977         mcs = rt2x00_get_field32(word, TXWI_W0_MCS);
 978         ampdu = rt2x00_get_field32(word, TXWI_W0_AMPDU);
 979
 980         real_mcs = rt2x00_get_field32(status, TX_STA_FIFO_MCS);
 981         aggr = rt2x00_get_field32(status, TX_STA_FIFO_TX_AGGRE);
 982         wcid = rt2x00_get_field32(status, TX_STA_FIFO_WCID);
 983         ack_req = rt2x00_get_field32(status, TX_STA_FIFO_TX_ACK_REQUIRED);
 984
 985         /*
 986          * If a frame was meant to be sent as a single non-aggregated MPDU
 987          * but ended up in an aggregate the used tx rate doesn't correlate
 988          * with the one specified in the TXWI as the whole aggregate is sent
 989          * with the same rate.
 990          *
 991          * For example: two frames are sent to rt2x00, the first one sets
 992          * AMPDU=1 and requests MCS7 whereas the second frame sets AMDPU=0
 993          * and requests MCS15. If the hw aggregates both frames into one
 994          * AMDPU the tx status for both frames will contain MCS7 although
 995          * the frame was sent successfully.
 996          *
 997          * Hence, replace the requested rate with the real tx rate to not
 998          * confuse the rate control algortihm by providing clearly wrong
 999          * data.
1000          *
1001          * FIXME: if we do not find matching entry, we tell that frame was
1002          * posted without any retries. We need to find a way to fix that
1003          * and provide retry count.
1004          */
1005         if (unlikely((aggr == 1 && ampdu == 0 && real_mcs != mcs)) || !match) {
1006                 rt2800_rate_from_status(skbdesc, status, rt2x00dev->curr_band);
1007                 mcs = real_mcs;
1008         }
1009
1010         if (aggr == 1 || ampdu == 1)
1011                 __set_bit(TXDONE_AMPDU, &txdesc.flags);
1012
1013         if (!ack_req)
1014                 __set_bit(TXDONE_NO_ACK_REQ, &txdesc.flags);
1015
1016         /*
1017          * Ralink has a retry mechanism using a global fallback
1018          * table. We setup this fallback table to try the immediate
1019          * lower rate for all rates. In the TX_STA_FIFO, the MCS field
1020          * always contains the MCS used for the last transmission, be
1021          * it successful or not.
1022          */
1023         if (rt2x00_get_field32(status, TX_STA_FIFO_TX_SUCCESS)) {
1024                 /*
1025                  * Transmission succeeded. The number of retries is
1026                  * mcs - real_mcs
1027                  */
1028                 __set_bit(TXDONE_SUCCESS, &txdesc.flags);
1029                 txdesc.retry = ((mcs > real_mcs) ? mcs - real_mcs : 0);
1030         } else {
1031                 /*
1032                  * Transmission failed. The number of retries is
1033                  * always 7 in this case (for a total number of 8
1034                  * frames sent).
1035                  */
1036                 __set_bit(TXDONE_FAILURE, &txdesc.flags);
1037                 txdesc.retry = rt2x00dev->long_retry;
1038         }
1039
1040         /*
1041          * the frame was retried at least once
1042          * -> hw used fallback rates
1043          */
1044         if (txdesc.retry)
1045                 __set_bit(TXDONE_FALLBACK, &txdesc.flags);
1046
1047         if (!match) {
1048                 /* RCU assures non-null sta will not be freed by mac80211. */
1049                 rcu_read_lock();
1050                 if (likely(wcid >= WCID_START && wcid <= WCID_END))
1051                         skbdesc->sta = drv_data->wcid_to_sta[wcid - WCID_START];
1052                 else
1053                         skbdesc->sta = NULL;
1054                 rt2x00lib_txdone_nomatch(entry, &txdesc);
1055                 rcu_read_unlock();
1056         } else {
1057                 rt2x00lib_txdone(entry, &txdesc);
1058         }
1059 }
1060 EXPORT_SYMBOL_GPL(rt2800_txdone_entry);
1061
1062 static unsigned int rt2800_hw_beacon_base(struct rt2x00_dev *rt2x00dev,
1063                                           unsigned int index)
1064 {
1065         return HW_BEACON_BASE(index);
1066 }
1067
1068 static inline u8 rt2800_get_beacon_offset(struct rt2x00_dev *rt2x00dev,
1069                                           unsigned int index)
1070 {
1071         return BEACON_BASE_TO_OFFSET(rt2800_hw_beacon_base(rt2x00dev, index));
1072 }
1073
1074 static void rt2800_update_beacons_setup(struct rt2x00_dev *rt2x00dev)
1075 {
1076         struct data_queue *queue = rt2x00dev->bcn;
1077         struct queue_entry *entry;
1078         int i, bcn_num = 0;
1079         u64 off, reg = 0;
1080         u32 bssid_dw1;
1081
1082         /*
1083          * Setup offsets of all active beacons in BCN_OFFSET{0,1} registers.
1084          */
1085         for (i = 0; i < queue->limit; i++) {
1086                 entry = &queue->entries[i];
1087                 if (!test_bit(ENTRY_BCN_ENABLED, &entry->flags))
1088                         continue;
1089                 off = rt2800_get_beacon_offset(rt2x00dev, entry->entry_idx);
1090                 reg |= off << (8 * bcn_num);
1091                 bcn_num++;
1092         }
1093
1094         rt2800_register_write(rt2x00dev, BCN_OFFSET0, (u32) reg);
1095         rt2800_register_write(rt2x00dev, BCN_OFFSET1, (u32) (reg >> 32));
1096
1097         /*
1098          * H/W sends up to MAC_BSSID_DW1_BSS_BCN_NUM + 1 consecutive beacons.
1099          */
1100         bssid_dw1 = rt2800_register_read(rt2x00dev, MAC_BSSID_DW1);
1101         rt2x00_set_field32(&bssid_dw1, MAC_BSSID_DW1_BSS_BCN_NUM,
1102                            bcn_num > 0 ? bcn_num - 1 : 0);
1103         rt2800_register_write(rt2x00dev, MAC_BSSID_DW1, bssid_dw1);
1104 }
1105
1106 void rt2800_write_beacon(struct queue_entry *entry, struct txentry_desc *txdesc)
1107 {
1108         struct rt2x00_dev *rt2x00dev = entry->queue->rt2x00dev;
1109         struct skb_frame_desc *skbdesc = get_skb_frame_desc(entry->skb);
1110         unsigned int beacon_base;
1111         unsigned int padding_len;
1112         u32 orig_reg, reg;
1113         const int txwi_desc_size = entry->queue->winfo_size;
1114
1115         /*
1116          * Disable beaconing while we are reloading the beacon data,
1117          * otherwise we might be sending out invalid data.
1118          */
1119         reg = rt2800_register_read(rt2x00dev, BCN_TIME_CFG);
1120         orig_reg = reg;
1121         rt2x00_set_field32(&reg, BCN_TIME_CFG_BEACON_GEN, 0);
1122         rt2800_register_write(rt2x00dev, BCN_TIME_CFG, reg);
1123
1124         /*
1125          * Add space for the TXWI in front of the skb.
1126          */
1127         memset(skb_push(entry->skb, txwi_desc_size), 0, txwi_desc_size);
1128
1129         /*
1130          * Register descriptor details in skb frame descriptor.
1131          */
1132         skbdesc->flags |= SKBDESC_DESC_IN_SKB;
1133         skbdesc->desc = entry->skb->data;
1134         skbdesc->desc_len = txwi_desc_size;
1135
1136         /*
1137          * Add the TXWI for the beacon to the skb.
1138          */
1139         rt2800_write_tx_data(entry, txdesc);
1140
1141         /*
1142          * Dump beacon to userspace through debugfs.
1143          */
1144         rt2x00debug_dump_frame(rt2x00dev, DUMP_FRAME_BEACON, entry);
1145
1146         /*
1147          * Write entire beacon with TXWI and padding to register.
1148          */
1149         padding_len = roundup(entry->skb->len, 4) - entry->skb->len;
1150         if (padding_len && skb_pad(entry->skb, padding_len)) {
1151                 rt2x00_err(rt2x00dev, "Failure padding beacon, aborting\n");
1152                 /* skb freed by skb_pad() on failure */
1153                 entry->skb = NULL;
1154                 rt2800_register_write(rt2x00dev, BCN_TIME_CFG, orig_reg);
1155                 return;
1156         }
1157
1158         beacon_base = rt2800_hw_beacon_base(rt2x00dev, entry->entry_idx);
1159
1160         rt2800_register_multiwrite(rt2x00dev, beacon_base, entry->skb->data,
1161                                    entry->skb->len + padding_len);
1162         __set_bit(ENTRY_BCN_ENABLED, &entry->flags);
1163
1164         /*
1165          * Change global beacons settings.
1166          */
1167         rt2800_update_beacons_setup(rt2x00dev);
1168
1169         /*
1170          * Restore beaconing state.
1171          */
1172         rt2800_register_write(rt2x00dev, BCN_TIME_CFG, orig_reg);
1173
1174         /*
1175          * Clean up beacon skb.
1176          */
1177         dev_kfree_skb_any(entry->skb);
1178         entry->skb = NULL;
1179 }
1180 EXPORT_SYMBOL_GPL(rt2800_write_beacon);
1181
1182 static inline void rt2800_clear_beacon_register(struct rt2x00_dev *rt2x00dev,
1183                                                 unsigned int index)
1184 {
1185         int i;
1186         const int txwi_desc_size = rt2x00dev->bcn->winfo_size;
1187         unsigned int beacon_base;
1188
1189         beacon_base = rt2800_hw_beacon_base(rt2x00dev, index);
1190
1191         /*
1192          * For the Beacon base registers we only need to clear
1193          * the whole TXWI which (when set to 0) will invalidate
1194          * the entire beacon.
1195          */
1196         for (i = 0; i < txwi_desc_size; i += sizeof(__le32))
1197                 rt2800_register_write(rt2x00dev, beacon_base + i, 0);
1198 }
1199
1200 void rt2800_clear_beacon(struct queue_entry *entry)
1201 {
1202         struct rt2x00_dev *rt2x00dev = entry->queue->rt2x00dev;
1203         u32 orig_reg, reg;
1204
1205         /*
1206          * Disable beaconing while we are reloading the beacon data,
1207          * otherwise we might be sending out invalid data.
1208          */
1209         orig_reg = rt2800_register_read(rt2x00dev, BCN_TIME_CFG);
1210         reg = orig_reg;
1211         rt2x00_set_field32(&reg, BCN_TIME_CFG_BEACON_GEN, 0);
1212         rt2800_register_write(rt2x00dev, BCN_TIME_CFG, reg);
1213
1214         /*
1215          * Clear beacon.
1216          */
1217         rt2800_clear_beacon_register(rt2x00dev, entry->entry_idx);
1218         __clear_bit(ENTRY_BCN_ENABLED, &entry->flags);
1219
1220         /*
1221          * Change global beacons settings.
1222          */
1223         rt2800_update_beacons_setup(rt2x00dev);
1224         /*
1225          * Restore beaconing state.
1226          */
1227         rt2800_register_write(rt2x00dev, BCN_TIME_CFG, orig_reg);
1228 }
1229 EXPORT_SYMBOL_GPL(rt2800_clear_beacon);
1230
1231 #ifdef CONFIG_RT2X00_LIB_DEBUGFS
1232 const struct rt2x00debug rt2800_rt2x00debug = {
1233         .owner  = THIS_MODULE,
1234         .csr    = {
1235                 .read           = rt2800_register_read,
1236                 .write          = rt2800_register_write,
1237                 .flags          = RT2X00DEBUGFS_OFFSET,
1238                 .word_base      = CSR_REG_BASE,
1239                 .word_size      = sizeof(u32),
1240                 .word_count     = CSR_REG_SIZE / sizeof(u32),
1241         },
1242         .eeprom = {
1243                 /* NOTE: The local EEPROM access functions can't
1244                  * be used here, use the generic versions instead.
1245                  */
1246                 .read           = rt2x00_eeprom_read,
1247                 .write          = rt2x00_eeprom_write,
1248                 .word_base      = EEPROM_BASE,
1249                 .word_size      = sizeof(u16),
1250                 .word_count     = EEPROM_SIZE / sizeof(u16),
1251         },
1252         .bbp    = {
1253                 .read           = rt2800_bbp_read,
1254                 .write          = rt2800_bbp_write,
1255                 .word_base      = BBP_BASE,
1256                 .word_size      = sizeof(u8),
1257                 .word_count     = BBP_SIZE / sizeof(u8),
1258         },
1259         .rf     = {
1260                 .read           = rt2x00_rf_read,
1261                 .write          = rt2800_rf_write,
1262                 .word_base      = RF_BASE,
1263                 .word_size      = sizeof(u32),
1264                 .word_count     = RF_SIZE / sizeof(u32),
1265         },
1266         .rfcsr  = {
1267                 .read           = rt2800_rfcsr_read,
1268                 .write          = rt2800_rfcsr_write,
1269                 .word_base      = RFCSR_BASE,
1270                 .word_size      = sizeof(u8),
1271                 .word_count     = RFCSR_SIZE / sizeof(u8),
1272         },
1273 };
1274 EXPORT_SYMBOL_GPL(rt2800_rt2x00debug);
1275 #endif /* CONFIG_RT2X00_LIB_DEBUGFS */
1276
1277 int rt2800_rfkill_poll(struct rt2x00_dev *rt2x00dev)
1278 {
1279         u32 reg;
1280
1281         if (rt2x00_rt(rt2x00dev, RT3290)) {
1282                 reg = rt2800_register_read(rt2x00dev, WLAN_FUN_CTRL);
1283                 return rt2x00_get_field32(reg, WLAN_GPIO_IN_BIT0);
1284         } else {
1285                 reg = rt2800_register_read(rt2x00dev, GPIO_CTRL);
1286                 return rt2x00_get_field32(reg, GPIO_CTRL_VAL2);
1287         }
1288 }
1289 EXPORT_SYMBOL_GPL(rt2800_rfkill_poll);
1290
1291 #ifdef CONFIG_RT2X00_LIB_LEDS
1292 static void rt2800_brightness_set(struct led_classdev *led_cdev,
1293                                   enum led_brightness brightness)
1294 {
1295         struct rt2x00_led *led =
1296             container_of(led_cdev, struct rt2x00_led, led_dev);
1297         unsigned int enabled = brightness != LED_OFF;
1298         unsigned int bg_mode =
1299             (enabled && led->rt2x00dev->curr_band == NL80211_BAND_2GHZ);
1300         unsigned int polarity =
1301                 rt2x00_get_field16(led->rt2x00dev->led_mcu_reg,
1302                                    EEPROM_FREQ_LED_POLARITY);
1303         unsigned int ledmode =
1304                 rt2x00_get_field16(led->rt2x00dev->led_mcu_reg,
1305                                    EEPROM_FREQ_LED_MODE);
1306         u32 reg;
1307
1308         /* Check for SoC (SOC devices don't support MCU requests) */
1309         if (rt2x00_is_soc(led->rt2x00dev)) {
1310                 reg = rt2800_register_read(led->rt2x00dev, LED_CFG);
1311
1312                 /* Set LED Polarity */
1313                 rt2x00_set_field32(&reg, LED_CFG_LED_POLAR, polarity);
1314
1315                 /* Set LED Mode */
1316                 if (led->type == LED_TYPE_RADIO) {
1317                         rt2x00_set_field32(&reg, LED_CFG_G_LED_MODE,
1318                                            enabled ? 3 : 0);
1319                 } else if (led->type == LED_TYPE_ASSOC) {
1320                         rt2x00_set_field32(&reg, LED_CFG_Y_LED_MODE,
1321                                            enabled ? 3 : 0);
1322                 } else if (led->type == LED_TYPE_QUALITY) {
1323                         rt2x00_set_field32(&reg, LED_CFG_R_LED_MODE,
1324                                            enabled ? 3 : 0);
1325                 }
1326
1327                 rt2800_register_write(led->rt2x00dev, LED_CFG, reg);
1328
1329         } else {
1330                 if (led->type == LED_TYPE_RADIO) {
1331                         rt2800_mcu_request(led->rt2x00dev, MCU_LED, 0xff, ledmode,
1332                                               enabled ? 0x20 : 0);
1333                 } else if (led->type == LED_TYPE_ASSOC) {
1334                         rt2800_mcu_request(led->rt2x00dev, MCU_LED, 0xff, ledmode,
1335                                               enabled ? (bg_mode ? 0x60 : 0xa0) : 0x20);
1336                 } else if (led->type == LED_TYPE_QUALITY) {
1337                         /*
1338                          * The brightness is divided into 6 levels (0 - 5),
1339                          * The specs tell us the following levels:
1340                          *      0, 1 ,3, 7, 15, 31
1341                          * to determine the level in a simple way we can simply
1342                          * work with bitshifting:
1343                          *      (1 << level) - 1
1344                          */
1345                         rt2800_mcu_request(led->rt2x00dev, MCU_LED_STRENGTH, 0xff,
1346                                               (1 << brightness / (LED_FULL / 6)) - 1,
1347                                               polarity);
1348                 }
1349         }
1350 }
1351
1352 static void rt2800_init_led(struct rt2x00_dev *rt2x00dev,
1353                      struct rt2x00_led *led, enum led_type type)
1354 {
1355         led->rt2x00dev = rt2x00dev;
1356         led->type = type;
1357         led->led_dev.brightness_set = rt2800_brightness_set;
1358         led->flags = LED_INITIALIZED;
1359 }
1360 #endif /* CONFIG_RT2X00_LIB_LEDS */
1361
1362 /*
1363  * Configuration handlers.
1364  */
1365 static void rt2800_config_wcid(struct rt2x00_dev *rt2x00dev,
1366                                const u8 *address,
1367                                int wcid)
1368 {
1369         struct mac_wcid_entry wcid_entry;
1370         u32 offset;
1371
1372         offset = MAC_WCID_ENTRY(wcid);
1373
1374         memset(&wcid_entry, 0xff, sizeof(wcid_entry));
1375         if (address)
1376                 memcpy(wcid_entry.mac, address, ETH_ALEN);
1377
1378         rt2800_register_multiwrite(rt2x00dev, offset,
1379                                       &wcid_entry, sizeof(wcid_entry));
1380 }
1381
1382 static void rt2800_delete_wcid_attr(struct rt2x00_dev *rt2x00dev, int wcid)
1383 {
1384         u32 offset;
1385         offset = MAC_WCID_ATTR_ENTRY(wcid);
1386         rt2800_register_write(rt2x00dev, offset, 0);
1387 }
1388
1389 static void rt2800_config_wcid_attr_bssidx(struct rt2x00_dev *rt2x00dev,
1390                                            int wcid, u32 bssidx)
1391 {
1392         u32 offset = MAC_WCID_ATTR_ENTRY(wcid);
1393         u32 reg;
1394
1395         /*
1396          * The BSS Idx numbers is split in a main value of 3 bits,
1397          * and a extended field for adding one additional bit to the value.
1398          */
1399         reg = rt2800_register_read(rt2x00dev, offset);
1400         rt2x00_set_field32(&reg, MAC_WCID_ATTRIBUTE_BSS_IDX, (bssidx & 0x7));
1401         rt2x00_set_field32(&reg, MAC_WCID_ATTRIBUTE_BSS_IDX_EXT,
1402                            (bssidx & 0x8) >> 3);
1403         rt2800_register_write(rt2x00dev, offset, reg);
1404 }
1405
1406 static void rt2800_config_wcid_attr_cipher(struct rt2x00_dev *rt2x00dev,
1407                                            struct rt2x00lib_crypto *crypto,
1408                                            struct ieee80211_key_conf *key)
1409 {
1410         struct mac_iveiv_entry iveiv_entry;
1411         u32 offset;
1412         u32 reg;
1413
1414         offset = MAC_WCID_ATTR_ENTRY(key->hw_key_idx);
1415
1416         if (crypto->cmd == SET_KEY) {
1417                 reg = rt2800_register_read(rt2x00dev, offset);
1418                 rt2x00_set_field32(&reg, MAC_WCID_ATTRIBUTE_KEYTAB,
1419                                    !!(key->flags & IEEE80211_KEY_FLAG_PAIRWISE));
1420                 /*
1421                  * Both the cipher as the BSS Idx numbers are split in a main
1422                  * value of 3 bits, and a extended field for adding one additional
1423                  * bit to the value.
1424                  */
1425                 rt2x00_set_field32(&reg, MAC_WCID_ATTRIBUTE_CIPHER,
1426                                    (crypto->cipher & 0x7));
1427                 rt2x00_set_field32(&reg, MAC_WCID_ATTRIBUTE_CIPHER_EXT,
1428                                    (crypto->cipher & 0x8) >> 3);
1429                 rt2x00_set_field32(&reg, MAC_WCID_ATTRIBUTE_RX_WIUDF, crypto->cipher);
1430                 rt2800_register_write(rt2x00dev, offset, reg);
1431         } else {
1432                 /* Delete the cipher without touching the bssidx */
1433                 reg = rt2800_register_read(rt2x00dev, offset);
1434                 rt2x00_set_field32(&reg, MAC_WCID_ATTRIBUTE_KEYTAB, 0);
1435                 rt2x00_set_field32(&reg, MAC_WCID_ATTRIBUTE_CIPHER, 0);
1436                 rt2x00_set_field32(&reg, MAC_WCID_ATTRIBUTE_CIPHER_EXT, 0);
1437                 rt2x00_set_field32(&reg, MAC_WCID_ATTRIBUTE_RX_WIUDF, 0);
1438                 rt2800_register_write(rt2x00dev, offset, reg);
1439         }
1440
1441         offset = MAC_IVEIV_ENTRY(key->hw_key_idx);
1442
1443         memset(&iveiv_entry, 0, sizeof(iveiv_entry));
1444         if ((crypto->cipher == CIPHER_TKIP) ||
1445             (crypto->cipher == CIPHER_TKIP_NO_MIC) ||
1446             (crypto->cipher == CIPHER_AES))
1447                 iveiv_entry.iv[3] |= 0x20;
1448         iveiv_entry.iv[3] |= key->keyidx << 6;
1449         rt2800_register_multiwrite(rt2x00dev, offset,
1450                                       &iveiv_entry, sizeof(iveiv_entry));
1451 }
1452
1453 int rt2800_config_shared_key(struct rt2x00_dev *rt2x00dev,
1454                              struct rt2x00lib_crypto *crypto,
1455                              struct ieee80211_key_conf *key)
1456 {
1457         struct hw_key_entry key_entry;
1458         struct rt2x00_field32 field;
1459         u32 offset;
1460         u32 reg;
1461
1462         if (crypto->cmd == SET_KEY) {
1463                 key->hw_key_idx = (4 * crypto->bssidx) + key->keyidx;
1464
1465                 memcpy(key_entry.key, crypto->key,
1466                        sizeof(key_entry.key));
1467                 memcpy(key_entry.tx_mic, crypto->tx_mic,
1468                        sizeof(key_entry.tx_mic));
1469                 memcpy(key_entry.rx_mic, crypto->rx_mic,
1470                        sizeof(key_entry.rx_mic));
1471
1472                 offset = SHARED_KEY_ENTRY(key->hw_key_idx);
1473                 rt2800_register_multiwrite(rt2x00dev, offset,
1474                                               &key_entry, sizeof(key_entry));
1475         }
1476
1477         /*
1478          * The cipher types are stored over multiple registers
1479          * starting with SHARED_KEY_MODE_BASE each word will have
1480          * 32 bits and contains the cipher types for 2 bssidx each.
1481          * Using the correct defines correctly will cause overhead,
1482          * so just calculate the correct offset.
1483          */
1484         field.bit_offset = 4 * (key->hw_key_idx % 8);
1485         field.bit_mask = 0x7 << field.bit_offset;
1486
1487         offset = SHARED_KEY_MODE_ENTRY(key->hw_key_idx / 8);
1488
1489         reg = rt2800_register_read(rt2x00dev, offset);
1490         rt2x00_set_field32(&reg, field,
1491                            (crypto->cmd == SET_KEY) * crypto->cipher);
1492         rt2800_register_write(rt2x00dev, offset, reg);
1493
1494         /*
1495          * Update WCID information
1496          */
1497         rt2800_config_wcid(rt2x00dev, crypto->address, key->hw_key_idx);
1498         rt2800_config_wcid_attr_bssidx(rt2x00dev, key->hw_key_idx,
1499                                        crypto->bssidx);
1500         rt2800_config_wcid_attr_cipher(rt2x00dev, crypto, key);
1501
1502         return 0;
1503 }
1504 EXPORT_SYMBOL_GPL(rt2800_config_shared_key);
1505
1506 int rt2800_config_pairwise_key(struct rt2x00_dev *rt2x00dev,
1507                                struct rt2x00lib_crypto *crypto,
1508                                struct ieee80211_key_conf *key)
1509 {
1510         struct hw_key_entry key_entry;
1511         u32 offset;
1512
1513         if (crypto->cmd == SET_KEY) {
1514                 /*
1515                  * Allow key configuration only for STAs that are
1516                  * known by the hw.
1517                  */
1518                 if (crypto->wcid > WCID_END)
1519                         return -ENOSPC;
1520                 key->hw_key_idx = crypto->wcid;
1521
1522                 memcpy(key_entry.key, crypto->key,
1523                        sizeof(key_entry.key));
1524                 memcpy(key_entry.tx_mic, crypto->tx_mic,
1525                        sizeof(key_entry.tx_mic));
1526                 memcpy(key_entry.rx_mic, crypto->rx_mic,
1527                        sizeof(key_entry.rx_mic));
1528
1529                 offset = PAIRWISE_KEY_ENTRY(key->hw_key_idx);
1530                 rt2800_register_multiwrite(rt2x00dev, offset,
1531                                               &key_entry, sizeof(key_entry));
1532         }
1533
1534         /*
1535          * Update WCID information
1536          */
1537         rt2800_config_wcid_attr_cipher(rt2x00dev, crypto, key);
1538
1539         return 0;
1540 }
1541 EXPORT_SYMBOL_GPL(rt2800_config_pairwise_key);
1542
1543 static void rt2800_set_max_psdu_len(struct rt2x00_dev *rt2x00dev)
1544 {
1545         u8 i, max_psdu;
1546         u32 reg;
1547         struct rt2800_drv_data *drv_data = rt2x00dev->drv_data;
1548
1549         for (i = 0; i < 3; i++)
1550                 if (drv_data->ampdu_factor_cnt[i] > 0)
1551                         break;
1552
1553         max_psdu = min(drv_data->max_psdu, i);
1554
1555         reg = rt2800_register_read(rt2x00dev, MAX_LEN_CFG);
1556         rt2x00_set_field32(&reg, MAX_LEN_CFG_MAX_PSDU, max_psdu);
1557         rt2800_register_write(rt2x00dev, MAX_LEN_CFG, reg);
1558 }
1559
1560 int rt2800_sta_add(struct rt2x00_dev *rt2x00dev, struct ieee80211_vif *vif,
1561                    struct ieee80211_sta *sta)
1562 {
1563         int wcid;
1564         struct rt2x00_sta *sta_priv = sta_to_rt2x00_sta(sta);
1565         struct rt2800_drv_data *drv_data = rt2x00dev->drv_data;
1566
1567         /*
1568          * Limit global maximum TX AMPDU length to smallest value of all
1569          * connected stations. In AP mode this can be suboptimal, but we
1570          * do not have a choice if some connected STA is not capable to
1571          * receive the same amount of data like the others.
1572          */
1573         if (sta->ht_cap.ht_supported) {
1574                 drv_data->ampdu_factor_cnt[sta->ht_cap.ampdu_factor & 3]++;
1575                 rt2800_set_max_psdu_len(rt2x00dev);
1576         }
1577
1578         /*
1579          * Search for the first free WCID entry and return the corresponding
1580          * index.
1581          */
1582         wcid = find_first_zero_bit(drv_data->sta_ids, STA_IDS_SIZE) + WCID_START;
1583
1584         /*
1585          * Store selected wcid even if it is invalid so that we can
1586          * later decide if the STA is uploaded into the hw.
1587          */
1588         sta_priv->wcid = wcid;
1589
1590         /*
1591          * No space left in the device, however, we can still communicate
1592          * with the STA -> No error.
1593          */
1594         if (wcid > WCID_END)
1595                 return 0;
1596
1597         __set_bit(wcid - WCID_START, drv_data->sta_ids);
1598         drv_data->wcid_to_sta[wcid - WCID_START] = sta;
1599
1600         /*
1601          * Clean up WCID attributes and write STA address to the device.
1602          */
1603         rt2800_delete_wcid_attr(rt2x00dev, wcid);
1604         rt2800_config_wcid(rt2x00dev, sta->addr, wcid);
1605         rt2800_config_wcid_attr_bssidx(rt2x00dev, wcid,
1606                                        rt2x00lib_get_bssidx(rt2x00dev, vif));
1607         return 0;
1608 }
1609 EXPORT_SYMBOL_GPL(rt2800_sta_add);
1610
1611 int rt2800_sta_remove(struct rt2x00_dev *rt2x00dev, struct ieee80211_sta *sta)
1612 {
1613         struct rt2800_drv_data *drv_data = rt2x00dev->drv_data;
1614         struct rt2x00_sta *sta_priv = sta_to_rt2x00_sta(sta);
1615         int wcid = sta_priv->wcid;
1616
1617         if (sta->ht_cap.ht_supported) {
1618                 drv_data->ampdu_factor_cnt[sta->ht_cap.ampdu_factor & 3]--;
1619                 rt2800_set_max_psdu_len(rt2x00dev);
1620         }
1621
1622         if (wcid > WCID_END)
1623                 return 0;
1624         /*
1625          * Remove WCID entry, no need to clean the attributes as they will
1626          * get renewed when the WCID is reused.
1627          */
1628         rt2800_config_wcid(rt2x00dev, NULL, wcid);
1629         drv_data->wcid_to_sta[wcid - WCID_START] = NULL;
1630         __clear_bit(wcid - WCID_START, drv_data->sta_ids);
1631
1632         return 0;
1633 }
1634 EXPORT_SYMBOL_GPL(rt2800_sta_remove);
1635
1636 void rt2800_config_filter(struct rt2x00_dev *rt2x00dev,
1637                           const unsigned int filter_flags)
1638 {
1639         u32 reg;
1640
1641         /*
1642          * Start configuration steps.
1643          * Note that the version error will always be dropped
1644          * and broadcast frames will always be accepted since
1645          * there is no filter for it at this time.
1646          */
1647         reg = rt2800_register_read(rt2x00dev, RX_FILTER_CFG);
1648         rt2x00_set_field32(&reg, RX_FILTER_CFG_DROP_CRC_ERROR,
1649                            !(filter_flags & FIF_FCSFAIL));
1650         rt2x00_set_field32(&reg, RX_FILTER_CFG_DROP_PHY_ERROR,
1651                            !(filter_flags & FIF_PLCPFAIL));
1652         rt2x00_set_field32(&reg, RX_FILTER_CFG_DROP_NOT_TO_ME,
1653                            !test_bit(CONFIG_MONITORING, &rt2x00dev->flags));
1654         rt2x00_set_field32(&reg, RX_FILTER_CFG_DROP_NOT_MY_BSSD, 0);
1655         rt2x00_set_field32(&reg, RX_FILTER_CFG_DROP_VER_ERROR, 1);
1656         rt2x00_set_field32(&reg, RX_FILTER_CFG_DROP_MULTICAST,
1657                            !(filter_flags & FIF_ALLMULTI));
1658         rt2x00_set_field32(&reg, RX_FILTER_CFG_DROP_BROADCAST, 0);
1659         rt2x00_set_field32(&reg, RX_FILTER_CFG_DROP_DUPLICATE, 1);
1660         rt2x00_set_field32(&reg, RX_FILTER_CFG_DROP_CF_END_ACK,
1661                            !(filter_flags & FIF_CONTROL));
1662         rt2x00_set_field32(&reg, RX_FILTER_CFG_DROP_CF_END,
1663                            !(filter_flags & FIF_CONTROL));
1664         rt2x00_set_field32(&reg, RX_FILTER_CFG_DROP_ACK,
1665                            !(filter_flags & FIF_CONTROL));
1666         rt2x00_set_field32(&reg, RX_FILTER_CFG_DROP_CTS,
1667                            !(filter_flags & FIF_CONTROL));
1668         rt2x00_set_field32(&reg, RX_FILTER_CFG_DROP_RTS,
1669                            !(filter_flags & FIF_CONTROL));
1670         rt2x00_set_field32(&reg, RX_FILTER_CFG_DROP_PSPOLL,
1671                            !(filter_flags & FIF_PSPOLL));
1672         rt2x00_set_field32(&reg, RX_FILTER_CFG_DROP_BA, 0);
1673         rt2x00_set_field32(&reg, RX_FILTER_CFG_DROP_BAR,
1674                            !(filter_flags & FIF_CONTROL));
1675         rt2x00_set_field32(&reg, RX_FILTER_CFG_DROP_CNTL,
1676                            !(filter_flags & FIF_CONTROL));
1677         rt2800_register_write(rt2x00dev, RX_FILTER_CFG, reg);
1678 }
1679 EXPORT_SYMBOL_GPL(rt2800_config_filter);
1680
1681 void rt2800_config_intf(struct rt2x00_dev *rt2x00dev, struct rt2x00_intf *intf,
1682                         struct rt2x00intf_conf *conf, const unsigned int flags)
1683 {
1684         u32 reg;
1685         bool update_bssid = false;
1686
1687         if (flags & CONFIG_UPDATE_TYPE) {
1688                 /*
1689                  * Enable synchronisation.
1690                  */
1691                 reg = rt2800_register_read(rt2x00dev, BCN_TIME_CFG);
1692                 rt2x00_set_field32(&reg, BCN_TIME_CFG_TSF_SYNC, conf->sync);
1693                 rt2800_register_write(rt2x00dev, BCN_TIME_CFG, reg);
1694
1695                 if (conf->sync == TSF_SYNC_AP_NONE) {
1696                         /*
1697                          * Tune beacon queue transmit parameters for AP mode
1698                          */
1699                         reg = rt2800_register_read(rt2x00dev, TBTT_SYNC_CFG);
1700                         rt2x00_set_field32(&reg, TBTT_SYNC_CFG_BCN_CWMIN, 0);
1701                         rt2x00_set_field32(&reg, TBTT_SYNC_CFG_BCN_AIFSN, 1);
1702                         rt2x00_set_field32(&reg, TBTT_SYNC_CFG_BCN_EXP_WIN, 32);
1703                         rt2x00_set_field32(&reg, TBTT_SYNC_CFG_TBTT_ADJUST, 0);
1704                         rt2800_register_write(rt2x00dev, TBTT_SYNC_CFG, reg);
1705                 } else {
1706                         reg = rt2800_register_read(rt2x00dev, TBTT_SYNC_CFG);
1707                         rt2x00_set_field32(&reg, TBTT_SYNC_CFG_BCN_CWMIN, 4);
1708                         rt2x00_set_field32(&reg, TBTT_SYNC_CFG_BCN_AIFSN, 2);
1709                         rt2x00_set_field32(&reg, TBTT_SYNC_CFG_BCN_EXP_WIN, 32);
1710                         rt2x00_set_field32(&reg, TBTT_SYNC_CFG_TBTT_ADJUST, 16);
1711                         rt2800_register_write(rt2x00dev, TBTT_SYNC_CFG, reg);
1712                 }
1713         }
1714
1715         if (flags & CONFIG_UPDATE_MAC) {
1716                 if (flags & CONFIG_UPDATE_TYPE &&
1717                     conf->sync == TSF_SYNC_AP_NONE) {
1718                         /*
1719                          * The BSSID register has to be set to our own mac
1720                          * address in AP mode.
1721                          */
1722                         memcpy(conf->bssid, conf->mac, sizeof(conf->mac));
1723                         update_bssid = true;
1724                 }
1725
1726                 if (!is_zero_ether_addr((const u8 *)conf->mac)) {
1727                         reg = le32_to_cpu(conf->mac[1]);
1728                         rt2x00_set_field32(&reg, MAC_ADDR_DW1_UNICAST_TO_ME_MASK, 0xff);
1729                         conf->mac[1] = cpu_to_le32(reg);
1730                 }
1731
1732                 rt2800_register_multiwrite(rt2x00dev, MAC_ADDR_DW0,
1733                                               conf->mac, sizeof(conf->mac));
1734         }
1735
1736         if ((flags & CONFIG_UPDATE_BSSID) || update_bssid) {
1737                 if (!is_zero_ether_addr((const u8 *)conf->bssid)) {
1738                         reg = le32_to_cpu(conf->bssid[1]);
1739                         rt2x00_set_field32(&reg, MAC_BSSID_DW1_BSS_ID_MASK, 3);
1740                         rt2x00_set_field32(&reg, MAC_BSSID_DW1_BSS_BCN_NUM, 0);
1741                         conf->bssid[1] = cpu_to_le32(reg);
1742                 }
1743
1744                 rt2800_register_multiwrite(rt2x00dev, MAC_BSSID_DW0,
1745                                               conf->bssid, sizeof(conf->bssid));
1746         }
1747 }
1748 EXPORT_SYMBOL_GPL(rt2800_config_intf);
1749
1750 static void rt2800_config_ht_opmode(struct rt2x00_dev *rt2x00dev,
1751                                     struct rt2x00lib_erp *erp)
1752 {
1753         bool any_sta_nongf = !!(erp->ht_opmode &
1754                                 IEEE80211_HT_OP_MODE_NON_GF_STA_PRSNT);
1755         u8 protection = erp->ht_opmode & IEEE80211_HT_OP_MODE_PROTECTION;
1756         u8 mm20_mode, mm40_mode, gf20_mode, gf40_mode;
1757         u16 mm20_rate, mm40_rate, gf20_rate, gf40_rate;
1758         u32 reg;
1759
1760         /* default protection rate for HT20: OFDM 24M */
1761         mm20_rate = gf20_rate = 0x4004;
1762
1763         /* default protection rate for HT40: duplicate OFDM 24M */
1764         mm40_rate = gf40_rate = 0x4084;
1765
1766         switch (protection) {
1767         case IEEE80211_HT_OP_MODE_PROTECTION_NONE:
1768                 /*
1769                  * All STAs in this BSS are HT20/40 but there might be
1770                  * STAs not supporting greenfield mode.
1771                  * => Disable protection for HT transmissions.
1772                  */
1773                 mm20_mode = mm40_mode = gf20_mode = gf40_mode = 0;
1774
1775                 break;
1776         case IEEE80211_HT_OP_MODE_PROTECTION_20MHZ:
1777                 /*
1778                  * All STAs in this BSS are HT20 or HT20/40 but there
1779                  * might be STAs not supporting greenfield mode.
1780                  * => Protect all HT40 transmissions.
1781                  */
1782                 mm20_mode = gf20_mode = 0;
1783                 mm40_mode = gf40_mode = 1;
1784
1785                 break;
1786         case IEEE80211_HT_OP_MODE_PROTECTION_NONMEMBER:
1787                 /*
1788                  * Nonmember protection:
1789                  * According to 802.11n we _should_ protect all
1790                  * HT transmissions (but we don't have to).
1791                  *
1792                  * But if cts_protection is enabled we _shall_ protect
1793                  * all HT transmissions using a CCK rate.
1794                  *
1795                  * And if any station is non GF we _shall_ protect
1796                  * GF transmissions.
1797                  *
1798                  * We decide to protect everything
1799                  * -> fall through to mixed mode.
1800                  */
1801         case IEEE80211_HT_OP_MODE_PROTECTION_NONHT_MIXED:
1802                 /*
1803                  * Legacy STAs are present
1804                  * => Protect all HT transmissions.
1805                  */
1806                 mm20_mode = mm40_mode = gf20_mode = gf40_mode = 1;
1807
1808                 /*
1809                  * If erp protection is needed we have to protect HT
1810                  * transmissions with CCK 11M long preamble.
1811                  */
1812                 if (erp->cts_protection) {
1813                         /* don't duplicate RTS/CTS in CCK mode */
1814                         mm20_rate = mm40_rate = 0x0003;
1815                         gf20_rate = gf40_rate = 0x0003;
1816                 }
1817                 break;
1818         }
1819
1820         /* check for STAs not supporting greenfield mode */
1821         if (any_sta_nongf)
1822                 gf20_mode = gf40_mode = 1;
1823
1824         /* Update HT protection config */
1825         reg = rt2800_register_read(rt2x00dev, MM20_PROT_CFG);
1826         rt2x00_set_field32(&reg, MM20_PROT_CFG_PROTECT_RATE, mm20_rate);
1827         rt2x00_set_field32(&reg, MM20_PROT_CFG_PROTECT_CTRL, mm20_mode);
1828         rt2800_register_write(rt2x00dev, MM20_PROT_CFG, reg);
1829
1830         reg = rt2800_register_read(rt2x00dev, MM40_PROT_CFG);
1831         rt2x00_set_field32(&reg, MM40_PROT_CFG_PROTECT_RATE, mm40_rate);
1832         rt2x00_set_field32(&reg, MM40_PROT_CFG_PROTECT_CTRL, mm40_mode);
1833         rt2800_register_write(rt2x00dev, MM40_PROT_CFG, reg);
1834
1835         reg = rt2800_register_read(rt2x00dev, GF20_PROT_CFG);
1836         rt2x00_set_field32(&reg, GF20_PROT_CFG_PROTECT_RATE, gf20_rate);
1837         rt2x00_set_field32(&reg, GF20_PROT_CFG_PROTECT_CTRL, gf20_mode);
1838         rt2800_register_write(rt2x00dev, GF20_PROT_CFG, reg);
1839
1840         reg = rt2800_register_read(rt2x00dev, GF40_PROT_CFG);
1841         rt2x00_set_field32(&reg, GF40_PROT_CFG_PROTECT_RATE, gf40_rate);
1842         rt2x00_set_field32(&reg, GF40_PROT_CFG_PROTECT_CTRL, gf40_mode);
1843         rt2800_register_write(rt2x00dev, GF40_PROT_CFG, reg);
1844 }
1845
1846 void rt2800_config_erp(struct rt2x00_dev *rt2x00dev, struct rt2x00lib_erp *erp,
1847                        u32 changed)
1848 {
1849         u32 reg;
1850
1851         if (changed & BSS_CHANGED_ERP_PREAMBLE) {
1852                 reg = rt2800_register_read(rt2x00dev, AUTO_RSP_CFG);
1853                 rt2x00_set_field32(&reg, AUTO_RSP_CFG_AR_PREAMBLE,
1854                                    !!erp->short_preamble);
1855                 rt2800_register_write(rt2x00dev, AUTO_RSP_CFG, reg);
1856         }
1857
1858         if (changed & BSS_CHANGED_ERP_CTS_PROT) {
1859                 reg = rt2800_register_read(rt2x00dev, OFDM_PROT_CFG);
1860                 rt2x00_set_field32(&reg, OFDM_PROT_CFG_PROTECT_CTRL,
1861                                    erp->cts_protection ? 2 : 0);
1862                 rt2800_register_write(rt2x00dev, OFDM_PROT_CFG, reg);
1863         }
1864
1865         if (changed & BSS_CHANGED_BASIC_RATES) {
1866                 rt2800_register_write(rt2x00dev, LEGACY_BASIC_RATE,
1867                                       0xff0 | erp->basic_rates);
1868                 rt2800_register_write(rt2x00dev, HT_BASIC_RATE, 0x00008003);
1869         }
1870
1871         if (changed & BSS_CHANGED_ERP_SLOT) {
1872                 reg = rt2800_register_read(rt2x00dev, BKOFF_SLOT_CFG);
1873                 rt2x00_set_field32(&reg, BKOFF_SLOT_CFG_SLOT_TIME,
1874                                    erp->slot_time);
1875                 rt2800_register_write(rt2x00dev, BKOFF_SLOT_CFG, reg);
1876
1877                 reg = rt2800_register_read(rt2x00dev, XIFS_TIME_CFG);
1878                 rt2x00_set_field32(&reg, XIFS_TIME_CFG_EIFS, erp->eifs);
1879                 rt2800_register_write(rt2x00dev, XIFS_TIME_CFG, reg);
1880         }
1881
1882         if (changed & BSS_CHANGED_BEACON_INT) {
1883                 reg = rt2800_register_read(rt2x00dev, BCN_TIME_CFG);
1884                 rt2x00_set_field32(&reg, BCN_TIME_CFG_BEACON_INTERVAL,
1885                                    erp->beacon_int * 16);
1886                 rt2800_register_write(rt2x00dev, BCN_TIME_CFG, reg);
1887         }
1888
1889         if (changed & BSS_CHANGED_HT)
1890                 rt2800_config_ht_opmode(rt2x00dev, erp);
1891 }
1892 EXPORT_SYMBOL_GPL(rt2800_config_erp);
1893
1894 static void rt2800_config_3572bt_ant(struct rt2x00_dev *rt2x00dev)
1895 {
1896         u32 reg;
1897         u16 eeprom;
1898         u8 led_ctrl, led_g_mode, led_r_mode;
1899
1900         reg = rt2800_register_read(rt2x00dev, GPIO_SWITCH);
1901         if (rt2x00dev->curr_band == NL80211_BAND_5GHZ) {
1902                 rt2x00_set_field32(&reg, GPIO_SWITCH_0, 1);
1903                 rt2x00_set_field32(&reg, GPIO_SWITCH_1, 1);
1904         } else {
1905                 rt2x00_set_field32(&reg, GPIO_SWITCH_0, 0);
1906                 rt2x00_set_field32(&reg, GPIO_SWITCH_1, 0);
1907         }
1908         rt2800_register_write(rt2x00dev, GPIO_SWITCH, reg);
1909
1910         reg = rt2800_register_read(rt2x00dev, LED_CFG);
1911         led_g_mode = rt2x00_get_field32(reg, LED_CFG_LED_POLAR) ? 3 : 0;
1912         led_r_mode = rt2x00_get_field32(reg, LED_CFG_LED_POLAR) ? 0 : 3;
1913         if (led_g_mode != rt2x00_get_field32(reg, LED_CFG_G_LED_MODE) ||
1914             led_r_mode != rt2x00_get_field32(reg, LED_CFG_R_LED_MODE)) {
1915                 eeprom = rt2800_eeprom_read(rt2x00dev, EEPROM_FREQ);
1916                 led_ctrl = rt2x00_get_field16(eeprom, EEPROM_FREQ_LED_MODE);
1917                 if (led_ctrl == 0 || led_ctrl > 0x40) {
1918                         rt2x00_set_field32(&reg, LED_CFG_G_LED_MODE, led_g_mode);
1919                         rt2x00_set_field32(&reg, LED_CFG_R_LED_MODE, led_r_mode);
1920                         rt2800_register_write(rt2x00dev, LED_CFG, reg);
1921                 } else {
1922                         rt2800_mcu_request(rt2x00dev, MCU_BAND_SELECT, 0xff,
1923                                            (led_g_mode << 2) | led_r_mode, 1);
1924                 }
1925         }
1926 }
1927
1928 static void rt2800_set_ant_diversity(struct rt2x00_dev *rt2x00dev,
1929                                      enum antenna ant)
1930 {
1931         u32 reg;
1932         u8 eesk_pin = (ant == ANTENNA_A) ? 1 : 0;
1933         u8 gpio_bit3 = (ant == ANTENNA_A) ? 0 : 1;
1934
1935         if (rt2x00_is_pci(rt2x00dev)) {
1936                 reg = rt2800_register_read(rt2x00dev, E2PROM_CSR);
1937                 rt2x00_set_field32(&reg, E2PROM_CSR_DATA_CLOCK, eesk_pin);
1938                 rt2800_register_write(rt2x00dev, E2PROM_CSR, reg);
1939         } else if (rt2x00_is_usb(rt2x00dev))
1940                 rt2800_mcu_request(rt2x00dev, MCU_ANT_SELECT, 0xff,
1941                                    eesk_pin, 0);
1942
1943         reg = rt2800_register_read(rt2x00dev, GPIO_CTRL);
1944         rt2x00_set_field32(&reg, GPIO_CTRL_DIR3, 0);
1945         rt2x00_set_field32(&reg, GPIO_CTRL_VAL3, gpio_bit3);
1946         rt2800_register_write(rt2x00dev, GPIO_CTRL, reg);
1947 }
1948
1949 void rt2800_config_ant(struct rt2x00_dev *rt2x00dev, struct antenna_setup *ant)
1950 {
1951         u8 r1;
1952         u8 r3;
1953         u16 eeprom;
1954
1955         r1 = rt2800_bbp_read(rt2x00dev, 1);
1956         r3 = rt2800_bbp_read(rt2x00dev, 3);
1957
1958         if (rt2x00_rt(rt2x00dev, RT3572) &&
1959             rt2x00_has_cap_bt_coexist(rt2x00dev))
1960                 rt2800_config_3572bt_ant(rt2x00dev);
1961
1962         /*
1963          * Configure the TX antenna.
1964          */
1965         switch (ant->tx_chain_num) {
1966         case 1:
1967                 rt2x00_set_field8(&r1, BBP1_TX_ANTENNA, 0);
1968                 break;
1969         case 2:
1970                 if (rt2x00_rt(rt2x00dev, RT3572) &&
1971                     rt2x00_has_cap_bt_coexist(rt2x00dev))
1972                         rt2x00_set_field8(&r1, BBP1_TX_ANTENNA, 1);
1973                 else
1974                         rt2x00_set_field8(&r1, BBP1_TX_ANTENNA, 2);
1975                 break;
1976         case 3:
1977                 rt2x00_set_field8(&r1, BBP1_TX_ANTENNA, 2);
1978                 break;
1979         }
1980
1981         /*
1982          * Configure the RX antenna.
1983          */
1984         switch (ant->rx_chain_num) {
1985         case 1:
1986                 if (rt2x00_rt(rt2x00dev, RT3070) ||
1987                     rt2x00_rt(rt2x00dev, RT3090) ||
1988                     rt2x00_rt(rt2x00dev, RT3352) ||
1989                     rt2x00_rt(rt2x00dev, RT3390)) {
1990                         eeprom = rt2800_eeprom_read(rt2x00dev,
1991                                                     EEPROM_NIC_CONF1);
1992                         if (rt2x00_get_field16(eeprom,
1993                                                 EEPROM_NIC_CONF1_ANT_DIVERSITY))
1994                                 rt2800_set_ant_diversity(rt2x00dev,
1995                                                 rt2x00dev->default_ant.rx);
1996                 }
1997                 rt2x00_set_field8(&r3, BBP3_RX_ANTENNA, 0);
1998                 break;
1999         case 2:
2000                 if (rt2x00_rt(rt2x00dev, RT3572) &&
2001                     rt2x00_has_cap_bt_coexist(rt2x00dev)) {
2002                         rt2x00_set_field8(&r3, BBP3_RX_ADC, 1);
2003                         rt2x00_set_field8(&r3, BBP3_RX_ANTENNA,
2004                                 rt2x00dev->curr_band == NL80211_BAND_5GHZ);
2005                         rt2800_set_ant_diversity(rt2x00dev, ANTENNA_B);
2006                 } else {
2007                         rt2x00_set_field8(&r3, BBP3_RX_ANTENNA, 1);
2008                 }
2009                 break;
2010         case 3:
2011                 rt2x00_set_field8(&r3, BBP3_RX_ANTENNA, 2);
2012                 break;
2013         }
2014
2015         rt2800_bbp_write(rt2x00dev, 3, r3);
2016         rt2800_bbp_write(rt2x00dev, 1, r1);
2017
2018         if (rt2x00_rt(rt2x00dev, RT3593)) {
2019                 if (ant->rx_chain_num == 1)
2020                         rt2800_bbp_write(rt2x00dev, 86, 0x00);
2021                 else
2022                         rt2800_bbp_write(rt2x00dev, 86, 0x46);
2023         }
2024 }
2025 EXPORT_SYMBOL_GPL(rt2800_config_ant);
2026
2027 static void rt2800_config_lna_gain(struct rt2x00_dev *rt2x00dev,
2028                                    struct rt2x00lib_conf *libconf)
2029 {
2030         u16 eeprom;
2031         short lna_gain;
2032
2033         if (libconf->rf.channel <= 14) {
2034                 eeprom = rt2800_eeprom_read(rt2x00dev, EEPROM_LNA);
2035                 lna_gain = rt2x00_get_field16(eeprom, EEPROM_LNA_BG);
2036         } else if (libconf->rf.channel <= 64) {
2037                 eeprom = rt2800_eeprom_read(rt2x00dev, EEPROM_LNA);
2038                 lna_gain = rt2x00_get_field16(eeprom, EEPROM_LNA_A0);
2039         } else if (libconf->rf.channel <= 128) {
2040                 if (rt2x00_rt(rt2x00dev, RT3593)) {
2041                         eeprom = rt2800_eeprom_read(rt2x00dev, EEPROM_EXT_LNA2);
2042                         lna_gain = rt2x00_get_field16(eeprom,
2043                                                       EEPROM_EXT_LNA2_A1);
2044                 } else {
2045                         eeprom = rt2800_eeprom_read(rt2x00dev, EEPROM_RSSI_BG2);
2046                         lna_gain = rt2x00_get_field16(eeprom,
2047                                                       EEPROM_RSSI_BG2_LNA_A1);
2048                 }
2049         } else {
2050                 if (rt2x00_rt(rt2x00dev, RT3593)) {
2051                         eeprom = rt2800_eeprom_read(rt2x00dev, EEPROM_EXT_LNA2);
2052                         lna_gain = rt2x00_get_field16(eeprom,
2053                                                       EEPROM_EXT_LNA2_A2);
2054                 } else {
2055                         eeprom = rt2800_eeprom_read(rt2x00dev, EEPROM_RSSI_A2);
2056                         lna_gain = rt2x00_get_field16(eeprom,
2057                                                       EEPROM_RSSI_A2_LNA_A2);
2058                 }
2059         }
2060
2061         rt2x00dev->lna_gain = lna_gain;
2062 }
2063
2064 static inline bool rt2800_clk_is_20mhz(struct rt2x00_dev *rt2x00dev)
2065 {
2066         return clk_get_rate(rt2x00dev->clk) == 20000000;
2067 }
2068
2069 #define FREQ_OFFSET_BOUND       0x5f
2070
2071 static void rt2800_freq_cal_mode1(struct rt2x00_dev *rt2x00dev)
2072 {
2073         u8 freq_offset, prev_freq_offset;
2074         u8 rfcsr, prev_rfcsr;
2075
2076         freq_offset = rt2x00_get_field8(rt2x00dev->freq_offset, RFCSR17_CODE);
2077         freq_offset = min_t(u8, freq_offset, FREQ_OFFSET_BOUND);
2078
2079         rfcsr = rt2800_rfcsr_read(rt2x00dev, 17);
2080         prev_rfcsr = rfcsr;
2081
2082         rt2x00_set_field8(&rfcsr, RFCSR17_CODE, freq_offset);
2083         if (rfcsr == prev_rfcsr)
2084                 return;
2085
2086         if (rt2x00_is_usb(rt2x00dev)) {
2087                 rt2800_mcu_request(rt2x00dev, MCU_FREQ_OFFSET, 0xff,
2088                                    freq_offset, prev_rfcsr);
2089                 return;
2090         }
2091
2092         prev_freq_offset = rt2x00_get_field8(prev_rfcsr, RFCSR17_CODE);
2093         while (prev_freq_offset != freq_offset) {
2094                 if (prev_freq_offset < freq_offset)
2095                         prev_freq_offset++;
2096                 else
2097                         prev_freq_offset--;
2098
2099                 rt2x00_set_field8(&rfcsr, RFCSR17_CODE, prev_freq_offset);
2100                 rt2800_rfcsr_write(rt2x00dev, 17, rfcsr);
2101
2102                 usleep_range(1000, 1500);
2103         }
2104 }
2105
2106 static void rt2800_config_channel_rf2xxx(struct rt2x00_dev *rt2x00dev,
2107                                          struct ieee80211_conf *conf,
2108                                          struct rf_channel *rf,
2109                                          struct channel_info *info)
2110 {
2111         rt2x00_set_field32(&rf->rf4, RF4_FREQ_OFFSET, rt2x00dev->freq_offset);
2112
2113         if (rt2x00dev->default_ant.tx_chain_num == 1)
2114                 rt2x00_set_field32(&rf->rf2, RF2_ANTENNA_TX1, 1);
2115
2116         if (rt2x00dev->default_ant.rx_chain_num == 1) {
2117                 rt2x00_set_field32(&rf->rf2, RF2_ANTENNA_RX1, 1);
2118                 rt2x00_set_field32(&rf->rf2, RF2_ANTENNA_RX2, 1);
2119         } else if (rt2x00dev->default_ant.rx_chain_num == 2)
2120                 rt2x00_set_field32(&rf->rf2, RF2_ANTENNA_RX2, 1);
2121
2122         if (rf->channel > 14) {
2123                 /*
2124                  * When TX power is below 0, we should increase it by 7 to
2125                  * make it a positive value (Minimum value is -7).
2126                  * However this means that values between 0 and 7 have
2127                  * double meaning, and we should set a 7DBm boost flag.
2128                  */
2129                 rt2x00_set_field32(&rf->rf3, RF3_TXPOWER_A_7DBM_BOOST,
2130                                    (info->default_power1 >= 0));
2131
2132                 if (info->default_power1 < 0)
2133                         info->default_power1 += 7;
2134
2135                 rt2x00_set_field32(&rf->rf3, RF3_TXPOWER_A, info->default_power1);
2136
2137                 rt2x00_set_field32(&rf->rf4, RF4_TXPOWER_A_7DBM_BOOST,
2138                                    (info->default_power2 >= 0));
2139
2140                 if (info->default_power2 < 0)
2141                         info->default_power2 += 7;
2142
2143                 rt2x00_set_field32(&rf->rf4, RF4_TXPOWER_A, info->default_power2);
2144         } else {
2145                 rt2x00_set_field32(&rf->rf3, RF3_TXPOWER_G, info->default_power1);
2146                 rt2x00_set_field32(&rf->rf4, RF4_TXPOWER_G, info->default_power2);
2147         }
2148
2149         rt2x00_set_field32(&rf->rf4, RF4_HT40, conf_is_ht40(conf));
2150
2151         rt2800_rf_write(rt2x00dev, 1, rf->rf1);
2152         rt2800_rf_write(rt2x00dev, 2, rf->rf2);
2153         rt2800_rf_write(rt2x00dev, 3, rf->rf3 & ~0x00000004);
2154         rt2800_rf_write(rt2x00dev, 4, rf->rf4);
2155
2156         udelay(200);
2157
2158         rt2800_rf_write(rt2x00dev, 1, rf->rf1);
2159         rt2800_rf_write(rt2x00dev, 2, rf->rf2);
2160         rt2800_rf_write(rt2x00dev, 3, rf->rf3 | 0x00000004);
2161         rt2800_rf_write(rt2x00dev, 4, rf->rf4);
2162
2163         udelay(200);
2164
2165         rt2800_rf_write(rt2x00dev, 1, rf->rf1);
2166         rt2800_rf_write(rt2x00dev, 2, rf->rf2);
2167         rt2800_rf_write(rt2x00dev, 3, rf->rf3 & ~0x00000004);
2168         rt2800_rf_write(rt2x00dev, 4, rf->rf4);
2169 }
2170
2171 static void rt2800_config_channel_rf3xxx(struct rt2x00_dev *rt2x00dev,
2172                                          struct ieee80211_conf *conf,
2173                                          struct rf_channel *rf,
2174                                          struct channel_info *info)
2175 {
2176         struct rt2800_drv_data *drv_data = rt2x00dev->drv_data;
2177         u8 rfcsr, calib_tx, calib_rx;
2178
2179         rt2800_rfcsr_write(rt2x00dev, 2, rf->rf1);
2180
2181         rfcsr = rt2800_rfcsr_read(rt2x00dev, 3);
2182         rt2x00_set_field8(&rfcsr, RFCSR3_K, rf->rf3);
2183         rt2800_rfcsr_write(rt2x00dev, 3, rfcsr);
2184
2185         rfcsr = rt2800_rfcsr_read(rt2x00dev, 6);
2186         rt2x00_set_field8(&rfcsr, RFCSR6_R1, rf->rf2);
2187         rt2800_rfcsr_write(rt2x00dev, 6, rfcsr);
2188
2189         rfcsr = rt2800_rfcsr_read(rt2x00dev, 12);
2190         rt2x00_set_field8(&rfcsr, RFCSR12_TX_POWER, info->default_power1);
2191         rt2800_rfcsr_write(rt2x00dev, 12, rfcsr);
2192
2193         rfcsr = rt2800_rfcsr_read(rt2x00dev, 13);
2194         rt2x00_set_field8(&rfcsr, RFCSR13_TX_POWER, info->default_power2);
2195         rt2800_rfcsr_write(rt2x00dev, 13, rfcsr);
2196
2197         rfcsr = rt2800_rfcsr_read(rt2x00dev, 1);
2198         rt2x00_set_field8(&rfcsr, RFCSR1_RX0_PD, 0);
2199         rt2x00_set_field8(&rfcsr, RFCSR1_RX1_PD,
2200                           rt2x00dev->default_ant.rx_chain_num <= 1);
2201         rt2x00_set_field8(&rfcsr, RFCSR1_RX2_PD,
2202                           rt2x00dev->default_ant.rx_chain_num <= 2);
2203         rt2x00_set_field8(&rfcsr, RFCSR1_TX0_PD, 0);
2204         rt2x00_set_field8(&rfcsr, RFCSR1_TX1_PD,
2205                           rt2x00dev->default_ant.tx_chain_num <= 1);
2206         rt2x00_set_field8(&rfcsr, RFCSR1_TX2_PD,
2207                           rt2x00dev->default_ant.tx_chain_num <= 2);
2208         rt2800_rfcsr_write(rt2x00dev, 1, rfcsr);
2209
2210         rfcsr = rt2800_rfcsr_read(rt2x00dev, 23);
2211         rt2x00_set_field8(&rfcsr, RFCSR23_FREQ_OFFSET, rt2x00dev->freq_offset);
2212         rt2800_rfcsr_write(rt2x00dev, 23, rfcsr);
2213
2214         if (rt2x00_rt(rt2x00dev, RT3390)) {
2215                 calib_tx = conf_is_ht40(conf) ? 0x68 : 0x4f;
2216                 calib_rx = conf_is_ht40(conf) ? 0x6f : 0x4f;
2217         } else {
2218                 if (conf_is_ht40(conf)) {
2219                         calib_tx = drv_data->calibration_bw40;
2220                         calib_rx = drv_data->calibration_bw40;
2221                 } else {
2222                         calib_tx = drv_data->calibration_bw20;
2223                         calib_rx = drv_data->calibration_bw20;
2224                 }
2225         }
2226
2227         rfcsr = rt2800_rfcsr_read(rt2x00dev, 24);
2228         rt2x00_set_field8(&rfcsr, RFCSR24_TX_CALIB, calib_tx);
2229         rt2800_rfcsr_write(rt2x00dev, 24, rfcsr);
2230
2231         rfcsr = rt2800_rfcsr_read(rt2x00dev, 31);
2232         rt2x00_set_field8(&rfcsr, RFCSR31_RX_CALIB, calib_rx);
2233         rt2800_rfcsr_write(rt2x00dev, 31, rfcsr);
2234
2235         rfcsr = rt2800_rfcsr_read(rt2x00dev, 7);
2236         rt2x00_set_field8(&rfcsr, RFCSR7_RF_TUNING, 1);
2237         rt2800_rfcsr_write(rt2x00dev, 7, rfcsr);
2238
2239         rfcsr = rt2800_rfcsr_read(rt2x00dev, 30);
2240         rt2x00_set_field8(&rfcsr, RFCSR30_RF_CALIBRATION, 1);
2241         rt2800_rfcsr_write(rt2x00dev, 30, rfcsr);
2242
2243         usleep_range(1000, 1500);
2244
2245         rt2x00_set_field8(&rfcsr, RFCSR30_RF_CALIBRATION, 0);
2246         rt2800_rfcsr_write(rt2x00dev, 30, rfcsr);
2247 }
2248
2249 static void rt2800_config_channel_rf3052(struct rt2x00_dev *rt2x00dev,
2250                                          struct ieee80211_conf *conf,
2251                                          struct rf_channel *rf,
2252                                          struct channel_info *info)
2253 {
2254         struct rt2800_drv_data *drv_data = rt2x00dev->drv_data;
2255         u8 rfcsr;
2256         u32 reg;
2257
2258         if (rf->channel <= 14) {
2259                 rt2800_bbp_write(rt2x00dev, 25, drv_data->bbp25);
2260                 rt2800_bbp_write(rt2x00dev, 26, drv_data->bbp26);
2261         } else {
2262                 rt2800_bbp_write(rt2x00dev, 25, 0x09);
2263                 rt2800_bbp_write(rt2x00dev, 26, 0xff);
2264         }
2265
2266         rt2800_rfcsr_write(rt2x00dev, 2, rf->rf1);
2267         rt2800_rfcsr_write(rt2x00dev, 3, rf->rf3);
2268
2269         rfcsr = rt2800_rfcsr_read(rt2x00dev, 6);
2270         rt2x00_set_field8(&rfcsr, RFCSR6_R1, rf->rf2);
2271         if (rf->channel <= 14)
2272                 rt2x00_set_field8(&rfcsr, RFCSR6_TXDIV, 2);
2273         else
2274                 rt2x00_set_field8(&rfcsr, RFCSR6_TXDIV, 1);
2275         rt2800_rfcsr_write(rt2x00dev, 6, rfcsr);
2276
2277         rfcsr = rt2800_rfcsr_read(rt2x00dev, 5);
2278         if (rf->channel <= 14)
2279                 rt2x00_set_field8(&rfcsr, RFCSR5_R1, 1);
2280         else
2281                 rt2x00_set_field8(&rfcsr, RFCSR5_R1, 2);
2282         rt2800_rfcsr_write(rt2x00dev, 5, rfcsr);
2283
2284         rfcsr = rt2800_rfcsr_read(rt2x00dev, 12);
2285         if (rf->channel <= 14) {
2286                 rt2x00_set_field8(&rfcsr, RFCSR12_DR0, 3);
2287                 rt2x00_set_field8(&rfcsr, RFCSR12_TX_POWER,
2288                                   info->default_power1);
2289         } else {
2290                 rt2x00_set_field8(&rfcsr, RFCSR12_DR0, 7);
2291                 rt2x00_set_field8(&rfcsr, RFCSR12_TX_POWER,
2292                                 (info->default_power1 & 0x3) |
2293                                 ((info->default_power1 & 0xC) << 1));
2294         }
2295         rt2800_rfcsr_write(rt2x00dev, 12, rfcsr);
2296
2297         rfcsr = rt2800_rfcsr_read(rt2x00dev, 13);
2298         if (rf->channel <= 14) {
2299                 rt2x00_set_field8(&rfcsr, RFCSR13_DR0, 3);
2300                 rt2x00_set_field8(&rfcsr, RFCSR13_TX_POWER,
2301                                   info->default_power2);
2302         } else {
2303                 rt2x00_set_field8(&rfcsr, RFCSR13_DR0, 7);
2304                 rt2x00_set_field8(&rfcsr, RFCSR13_TX_POWER,
2305                                 (info->default_power2 & 0x3) |
2306                                 ((info->default_power2 & 0xC) << 1));
2307         }
2308         rt2800_rfcsr_write(rt2x00dev, 13, rfcsr);
2309
2310         rfcsr = rt2800_rfcsr_read(rt2x00dev, 1);
2311         rt2x00_set_field8(&rfcsr, RFCSR1_RX0_PD, 0);
2312         rt2x00_set_field8(&rfcsr, RFCSR1_TX0_PD, 0);
2313         rt2x00_set_field8(&rfcsr, RFCSR1_RX1_PD, 0);
2314         rt2x00_set_field8(&rfcsr, RFCSR1_TX1_PD, 0);
2315         rt2x00_set_field8(&rfcsr, RFCSR1_RX2_PD, 0);
2316         rt2x00_set_field8(&rfcsr, RFCSR1_TX2_PD, 0);
2317         if (rt2x00_has_cap_bt_coexist(rt2x00dev)) {
2318                 if (rf->channel <= 14) {
2319                         rt2x00_set_field8(&rfcsr, RFCSR1_RX0_PD, 1);
2320                         rt2x00_set_field8(&rfcsr, RFCSR1_TX0_PD, 1);
2321                 }
2322                 rt2x00_set_field8(&rfcsr, RFCSR1_RX2_PD, 1);
2323                 rt2x00_set_field8(&rfcsr, RFCSR1_TX2_PD, 1);
2324         } else {
2325                 switch (rt2x00dev->default_ant.tx_chain_num) {
2326                 case 1:
2327                         rt2x00_set_field8(&rfcsr, RFCSR1_TX1_PD, 1);
2328                 case 2:
2329                         rt2x00_set_field8(&rfcsr, RFCSR1_TX2_PD, 1);
2330                         break;
2331                 }
2332
2333                 switch (rt2x00dev->default_ant.rx_chain_num) {
2334                 case 1:
2335                         rt2x00_set_field8(&rfcsr, RFCSR1_RX1_PD, 1);
2336                 case 2:
2337                         rt2x00_set_field8(&rfcsr, RFCSR1_RX2_PD, 1);
2338                         break;
2339                 }
2340         }
2341         rt2800_rfcsr_write(rt2x00dev, 1, rfcsr);
2342
2343         rfcsr = rt2800_rfcsr_read(rt2x00dev, 23);
2344         rt2x00_set_field8(&rfcsr, RFCSR23_FREQ_OFFSET, rt2x00dev->freq_offset);
2345         rt2800_rfcsr_write(rt2x00dev, 23, rfcsr);
2346
2347         if (conf_is_ht40(conf)) {
2348                 rt2800_rfcsr_write(rt2x00dev, 24, drv_data->calibration_bw40);
2349                 rt2800_rfcsr_write(rt2x00dev, 31, drv_data->calibration_bw40);
2350         } else {
2351                 rt2800_rfcsr_write(rt2x00dev, 24, drv_data->calibration_bw20);
2352                 rt2800_rfcsr_write(rt2x00dev, 31, drv_data->calibration_bw20);
2353         }
2354
2355         if (rf->channel <= 14) {
2356                 rt2800_rfcsr_write(rt2x00dev, 7, 0xd8);
2357                 rt2800_rfcsr_write(rt2x00dev, 9, 0xc3);
2358                 rt2800_rfcsr_write(rt2x00dev, 10, 0xf1);
2359                 rt2800_rfcsr_write(rt2x00dev, 11, 0xb9);
2360                 rt2800_rfcsr_write(rt2x00dev, 15, 0x53);
2361                 rfcsr = 0x4c;
2362                 rt2x00_set_field8(&rfcsr, RFCSR16_TXMIXER_GAIN,
2363                                   drv_data->txmixer_gain_24g);
2364                 rt2800_rfcsr_write(rt2x00dev, 16, rfcsr);
2365                 rt2800_rfcsr_write(rt2x00dev, 17, 0x23);
2366                 rt2800_rfcsr_write(rt2x00dev, 19, 0x93);
2367                 rt2800_rfcsr_write(rt2x00dev, 20, 0xb3);
2368                 rt2800_rfcsr_write(rt2x00dev, 25, 0x15);
2369                 rt2800_rfcsr_write(rt2x00dev, 26, 0x85);
2370                 rt2800_rfcsr_write(rt2x00dev, 27, 0x00);
2371                 rt2800_rfcsr_write(rt2x00dev, 29, 0x9b);
2372         } else {
2373                 rfcsr = rt2800_rfcsr_read(rt2x00dev, 7);
2374                 rt2x00_set_field8(&rfcsr, RFCSR7_BIT2, 1);
2375                 rt2x00_set_field8(&rfcsr, RFCSR7_BIT3, 0);
2376                 rt2x00_set_field8(&rfcsr, RFCSR7_BIT4, 1);
2377                 rt2x00_set_field8(&rfcsr, RFCSR7_BITS67, 0);
2378                 rt2800_rfcsr_write(rt2x00dev, 7, rfcsr);
2379                 rt2800_rfcsr_write(rt2x00dev, 9, 0xc0);
2380                 rt2800_rfcsr_write(rt2x00dev, 10, 0xf1);
2381                 rt2800_rfcsr_write(rt2x00dev, 11, 0x00);
2382                 rt2800_rfcsr_write(rt2x00dev, 15, 0x43);
2383                 rfcsr = 0x7a;
2384                 rt2x00_set_field8(&rfcsr, RFCSR16_TXMIXER_GAIN,
2385                                   drv_data->txmixer_gain_5g);
2386                 rt2800_rfcsr_write(rt2x00dev, 16, rfcsr);
2387                 rt2800_rfcsr_write(rt2x00dev, 17, 0x23);
2388                 if (rf->channel <= 64) {
2389                         rt2800_rfcsr_write(rt2x00dev, 19, 0xb7);
2390                         rt2800_rfcsr_write(rt2x00dev, 20, 0xf6);
2391                         rt2800_rfcsr_write(rt2x00dev, 25, 0x3d);
2392                 } else if (rf->channel <= 128) {
2393                         rt2800_rfcsr_write(rt2x00dev, 19, 0x74);
2394                         rt2800_rfcsr_write(rt2x00dev, 20, 0xf4);
2395                         rt2800_rfcsr_write(rt2x00dev, 25, 0x01);
2396                 } else {
2397                         rt2800_rfcsr_write(rt2x00dev, 19, 0x72);
2398                         rt2800_rfcsr_write(rt2x00dev, 20, 0xf3);
2399                         rt2800_rfcsr_write(rt2x00dev, 25, 0x01);
2400                 }
2401                 rt2800_rfcsr_write(rt2x00dev, 26, 0x87);
2402                 rt2800_rfcsr_write(rt2x00dev, 27, 0x01);
2403                 rt2800_rfcsr_write(rt2x00dev, 29, 0x9f);
2404         }
2405
2406         reg = rt2800_register_read(rt2x00dev, GPIO_CTRL);
2407         rt2x00_set_field32(&reg, GPIO_CTRL_DIR7, 0);
2408         if (rf->channel <= 14)
2409                 rt2x00_set_field32(&reg, GPIO_CTRL_VAL7, 1);
2410         else
2411                 rt2x00_set_field32(&reg, GPIO_CTRL_VAL7, 0);
2412         rt2800_register_write(rt2x00dev, GPIO_CTRL, reg);
2413
2414         rfcsr = rt2800_rfcsr_read(rt2x00dev, 7);
2415         rt2x00_set_field8(&rfcsr, RFCSR7_RF_TUNING, 1);
2416         rt2800_rfcsr_write(rt2x00dev, 7, rfcsr);
2417 }
2418
2419 static void rt2800_config_channel_rf3053(struct rt2x00_dev *rt2x00dev,
2420                                          struct ieee80211_conf *conf,
2421                                          struct rf_channel *rf,
2422                                          struct channel_info *info)
2423 {
2424         struct rt2800_drv_data *drv_data = rt2x00dev->drv_data;
2425         u8 txrx_agc_fc;
2426         u8 txrx_h20m;
2427         u8 rfcsr;
2428         u8 bbp;
2429         const bool txbf_enabled = false; /* TODO */
2430
2431         /* TODO: use TX{0,1,2}FinePowerControl values from EEPROM */
2432         bbp = rt2800_bbp_read(rt2x00dev, 109);
2433         rt2x00_set_field8(&bbp, BBP109_TX0_POWER, 0);
2434         rt2x00_set_field8(&bbp, BBP109_TX1_POWER, 0);
2435         rt2800_bbp_write(rt2x00dev, 109, bbp);
2436
2437         bbp = rt2800_bbp_read(rt2x00dev, 110);
2438         rt2x00_set_field8(&bbp, BBP110_TX2_POWER, 0);
2439         rt2800_bbp_write(rt2x00dev, 110, bbp);
2440
2441         if (rf->channel <= 14) {
2442                 /* Restore BBP 25 & 26 for 2.4 GHz */
2443                 rt2800_bbp_write(rt2x00dev, 25, drv_data->bbp25);
2444                 rt2800_bbp_write(rt2x00dev, 26, drv_data->bbp26);
2445         } else {
2446                 /* Hard code BBP 25 & 26 for 5GHz */
2447
2448                 /* Enable IQ Phase correction */
2449                 rt2800_bbp_write(rt2x00dev, 25, 0x09);
2450                 /* Setup IQ Phase correction value */
2451                 rt2800_bbp_write(rt2x00dev, 26, 0xff);
2452         }
2453
2454         rt2800_rfcsr_write(rt2x00dev, 8, rf->rf1);
2455         rt2800_rfcsr_write(rt2x00dev, 9, rf->rf3 & 0xf);
2456
2457         rfcsr = rt2800_rfcsr_read(rt2x00dev, 11);
2458         rt2x00_set_field8(&rfcsr, RFCSR11_R, (rf->rf2 & 0x3));
2459         rt2800_rfcsr_write(rt2x00dev, 11, rfcsr);
2460
2461         rfcsr = rt2800_rfcsr_read(rt2x00dev, 11);
2462         rt2x00_set_field8(&rfcsr, RFCSR11_PLL_IDOH, 1);
2463         if (rf->channel <= 14)
2464                 rt2x00_set_field8(&rfcsr, RFCSR11_PLL_MOD, 1);
2465         else
2466                 rt2x00_set_field8(&rfcsr, RFCSR11_PLL_MOD, 2);
2467         rt2800_rfcsr_write(rt2x00dev, 11, rfcsr);
2468
2469         rfcsr = rt2800_rfcsr_read(rt2x00dev, 53);
2470         if (rf->channel <= 14) {
2471                 rfcsr = 0;
2472                 rt2x00_set_field8(&rfcsr, RFCSR53_TX_POWER,
2473                                   info->default_power1 & 0x1f);
2474         } else {
2475                 if (rt2x00_is_usb(rt2x00dev))
2476                         rfcsr = 0x40;
2477
2478                 rt2x00_set_field8(&rfcsr, RFCSR53_TX_POWER,
2479                                   ((info->default_power1 & 0x18) << 1) |
2480                                   (info->default_power1 & 7));
2481         }
2482         rt2800_rfcsr_write(rt2x00dev, 53, rfcsr);
2483
2484         rfcsr = rt2800_rfcsr_read(rt2x00dev, 55);
2485         if (rf->channel <= 14) {
2486                 rfcsr = 0;
2487                 rt2x00_set_field8(&rfcsr, RFCSR55_TX_POWER,
2488                                   info->default_power2 & 0x1f);
2489         } else {
2490                 if (rt2x00_is_usb(rt2x00dev))
2491                         rfcsr = 0x40;
2492
2493                 rt2x00_set_field8(&rfcsr, RFCSR55_TX_POWER,
2494                                   ((info->default_power2 & 0x18) << 1) |
2495                                   (info->default_power2 & 7));
2496         }
2497         rt2800_rfcsr_write(rt2x00dev, 55, rfcsr);
2498
2499         rfcsr = rt2800_rfcsr_read(rt2x00dev, 54);
2500         if (rf->channel <= 14) {
2501                 rfcsr = 0;
2502                 rt2x00_set_field8(&rfcsr, RFCSR54_TX_POWER,
2503                                   info->default_power3 & 0x1f);
2504         } else {
2505                 if (rt2x00_is_usb(rt2x00dev))
2506                         rfcsr = 0x40;
2507
2508                 rt2x00_set_field8(&rfcsr, RFCSR54_TX_POWER,
2509                                   ((info->default_power3 & 0x18) << 1) |
2510                                   (info->default_power3 & 7));
2511         }
2512         rt2800_rfcsr_write(rt2x00dev, 54, rfcsr);
2513
2514         rfcsr = rt2800_rfcsr_read(rt2x00dev, 1);
2515         rt2x00_set_field8(&rfcsr, RFCSR1_RX0_PD, 0);
2516         rt2x00_set_field8(&rfcsr, RFCSR1_TX0_PD, 0);
2517         rt2x00_set_field8(&rfcsr, RFCSR1_RX1_PD, 0);
2518         rt2x00_set_field8(&rfcsr, RFCSR1_TX1_PD, 0);
2519         rt2x00_set_field8(&rfcsr, RFCSR1_RX2_PD, 0);
2520         rt2x00_set_field8(&rfcsr, RFCSR1_TX2_PD, 0);
2521         rt2x00_set_field8(&rfcsr, RFCSR1_RF_BLOCK_EN, 1);
2522         rt2x00_set_field8(&rfcsr, RFCSR1_PLL_PD, 1);
2523
2524         switch (rt2x00dev->default_ant.tx_chain_num) {
2525         case 3:
2526                 rt2x00_set_field8(&rfcsr, RFCSR1_TX2_PD, 1);
2527                 /* fallthrough */
2528         case 2:
2529                 rt2x00_set_field8(&rfcsr, RFCSR1_TX1_PD, 1);
2530                 /* fallthrough */
2531         case 1:
2532                 rt2x00_set_field8(&rfcsr, RFCSR1_TX0_PD, 1);
2533                 break;
2534         }
2535
2536         switch (rt2x00dev->default_ant.rx_chain_num) {
2537         case 3:
2538                 rt2x00_set_field8(&rfcsr, RFCSR1_RX2_PD, 1);
2539                 /* fallthrough */
2540         case 2:
2541                 rt2x00_set_field8(&rfcsr, RFCSR1_RX1_PD, 1);
2542                 /* fallthrough */
2543         case 1:
2544                 rt2x00_set_field8(&rfcsr, RFCSR1_RX0_PD, 1);
2545                 break;
2546         }
2547         rt2800_rfcsr_write(rt2x00dev, 1, rfcsr);
2548
2549         rt2800_freq_cal_mode1(rt2x00dev);
2550
2551         if (conf_is_ht40(conf)) {
2552                 txrx_agc_fc = rt2x00_get_field8(drv_data->calibration_bw40,
2553                                                 RFCSR24_TX_AGC_FC);
2554                 txrx_h20m = rt2x00_get_field8(drv_data->calibration_bw40,
2555                                               RFCSR24_TX_H20M);
2556         } else {
2557                 txrx_agc_fc = rt2x00_get_field8(drv_data->calibration_bw20,
2558                                                 RFCSR24_TX_AGC_FC);
2559                 txrx_h20m = rt2x00_get_field8(drv_data->calibration_bw20,
2560                                               RFCSR24_TX_H20M);
2561         }
2562
2563         /* NOTE: the reference driver does not writes the new value
2564          * back to RFCSR 32
2565          */
2566         rfcsr = rt2800_rfcsr_read(rt2x00dev, 32);
2567         rt2x00_set_field8(&rfcsr, RFCSR32_TX_AGC_FC, txrx_agc_fc);
2568
2569         if (rf->channel <= 14)
2570                 rfcsr = 0xa0;
2571         else
2572                 rfcsr = 0x80;
2573         rt2800_rfcsr_write(rt2x00dev, 31, rfcsr);
2574
2575         rfcsr = rt2800_rfcsr_read(rt2x00dev, 30);
2576         rt2x00_set_field8(&rfcsr, RFCSR30_TX_H20M, txrx_h20m);
2577         rt2x00_set_field8(&rfcsr, RFCSR30_RX_H20M, txrx_h20m);
2578         rt2800_rfcsr_write(rt2x00dev, 30, rfcsr);
2579
2580         /* Band selection */
2581         rfcsr = rt2800_rfcsr_read(rt2x00dev, 36);
2582         if (rf->channel <= 14)
2583                 rt2x00_set_field8(&rfcsr, RFCSR36_RF_BS, 1);
2584         else
2585                 rt2x00_set_field8(&rfcsr, RFCSR36_RF_BS, 0);
2586         rt2800_rfcsr_write(rt2x00dev, 36, rfcsr);
2587
2588         rfcsr = rt2800_rfcsr_read(rt2x00dev, 34);
2589         if (rf->channel <= 14)
2590                 rfcsr = 0x3c;
2591         else
2592                 rfcsr = 0x20;
2593         rt2800_rfcsr_write(rt2x00dev, 34, rfcsr);
2594
2595         rfcsr = rt2800_rfcsr_read(rt2x00dev, 12);
2596         if (rf->channel <= 14)
2597                 rfcsr = 0x1a;
2598         else
2599                 rfcsr = 0x12;
2600         rt2800_rfcsr_write(rt2x00dev, 12, rfcsr);
2601
2602         rfcsr = rt2800_rfcsr_read(rt2x00dev, 6);
2603         if (rf->channel >= 1 && rf->channel <= 14)
2604                 rt2x00_set_field8(&rfcsr, RFCSR6_VCO_IC, 1);
2605         else if (rf->channel >= 36 && rf->channel <= 64)
2606                 rt2x00_set_field8(&rfcsr, RFCSR6_VCO_IC, 2);
2607         else if (rf->channel >= 100 && rf->channel <= 128)
2608                 rt2x00_set_field8(&rfcsr, RFCSR6_VCO_IC, 2);
2609         else
2610                 rt2x00_set_field8(&rfcsr, RFCSR6_VCO_IC, 1);
2611         rt2800_rfcsr_write(rt2x00dev, 6, rfcsr);
2612
2613         rfcsr = rt2800_rfcsr_read(rt2x00dev, 30);
2614         rt2x00_set_field8(&rfcsr, RFCSR30_RX_VCM, 2);
2615         rt2800_rfcsr_write(rt2x00dev, 30, rfcsr);
2616
2617         rt2800_rfcsr_write(rt2x00dev, 46, 0x60);
2618
2619         if (rf->channel <= 14) {
2620                 rt2800_rfcsr_write(rt2x00dev, 10, 0xd3);
2621                 rt2800_rfcsr_write(rt2x00dev, 13, 0x12);
2622         } else {
2623                 rt2800_rfcsr_write(rt2x00dev, 10, 0xd8);
2624                 rt2800_rfcsr_write(rt2x00dev, 13, 0x23);
2625         }
2626
2627         rfcsr = rt2800_rfcsr_read(rt2x00dev, 51);
2628         rt2x00_set_field8(&rfcsr, RFCSR51_BITS01, 1);
2629         rt2800_rfcsr_write(rt2x00dev, 51, rfcsr);
2630
2631         rfcsr = rt2800_rfcsr_read(rt2x00dev, 51);
2632         if (rf->channel <= 14) {
2633                 rt2x00_set_field8(&rfcsr, RFCSR51_BITS24, 5);
2634                 rt2x00_set_field8(&rfcsr, RFCSR51_BITS57, 3);
2635         } else {
2636                 rt2x00_set_field8(&rfcsr, RFCSR51_BITS24, 4);
2637                 rt2x00_set_field8(&rfcsr, RFCSR51_BITS57, 2);
2638         }
2639         rt2800_rfcsr_write(rt2x00dev, 51, rfcsr);
2640
2641         rfcsr = rt2800_rfcsr_read(rt2x00dev, 49);
2642         if (rf->channel <= 14)
2643                 rt2x00_set_field8(&rfcsr, RFCSR49_TX_LO1_IC, 3);
2644         else
2645                 rt2x00_set_field8(&rfcsr, RFCSR49_TX_LO1_IC, 2);
2646
2647         if (txbf_enabled)
2648                 rt2x00_set_field8(&rfcsr, RFCSR49_TX_DIV, 1);
2649
2650         rt2800_rfcsr_write(rt2x00dev, 49, rfcsr);
2651
2652         rfcsr = rt2800_rfcsr_read(rt2x00dev, 50);
2653         rt2x00_set_field8(&rfcsr, RFCSR50_TX_LO1_EN, 0);
2654         rt2800_rfcsr_write(rt2x00dev, 50, rfcsr);
2655
2656         rfcsr = rt2800_rfcsr_read(rt2x00dev, 57);
2657         if (rf->channel <= 14)
2658                 rt2x00_set_field8(&rfcsr, RFCSR57_DRV_CC, 0x1b);
2659         else
2660                 rt2x00_set_field8(&rfcsr, RFCSR57_DRV_CC, 0x0f);
2661         rt2800_rfcsr_write(rt2x00dev, 57, rfcsr);
2662
2663         if (rf->channel <= 14) {
2664                 rt2800_rfcsr_write(rt2x00dev, 44, 0x93);
2665                 rt2800_rfcsr_write(rt2x00dev, 52, 0x45);
2666         } else {
2667                 rt2800_rfcsr_write(rt2x00dev, 44, 0x9b);
2668                 rt2800_rfcsr_write(rt2x00dev, 52, 0x05);
2669         }
2670
2671         /* Initiate VCO calibration */
2672         rfcsr = rt2800_rfcsr_read(rt2x00dev, 3);
2673         if (rf->channel <= 14) {
2674                 rt2x00_set_field8(&rfcsr, RFCSR3_VCOCAL_EN, 1);
2675         } else {
2676                 rt2x00_set_field8(&rfcsr, RFCSR3_BIT1, 1);
2677                 rt2x00_set_field8(&rfcsr, RFCSR3_BIT2, 1);
2678                 rt2x00_set_field8(&rfcsr, RFCSR3_BIT3, 1);
2679                 rt2x00_set_field8(&rfcsr, RFCSR3_BIT4, 1);
2680                 rt2x00_set_field8(&rfcsr, RFCSR3_BIT5, 1);
2681                 rt2x00_set_field8(&rfcsr, RFCSR3_VCOCAL_EN, 1);
2682         }
2683         rt2800_rfcsr_write(rt2x00dev, 3, rfcsr);
2684
2685         if (rf->channel >= 1 && rf->channel <= 14) {
2686                 rfcsr = 0x23;
2687                 if (txbf_enabled)
2688                         rt2x00_set_field8(&rfcsr, RFCSR39_RX_DIV, 1);
2689                 rt2800_rfcsr_write(rt2x00dev, 39, rfcsr);
2690
2691                 rt2800_rfcsr_write(rt2x00dev, 45, 0xbb);
2692         } else if (rf->channel >= 36 && rf->channel <= 64) {
2693                 rfcsr = 0x36;
2694                 if (txbf_enabled)
2695                         rt2x00_set_field8(&rfcsr, RFCSR39_RX_DIV, 1);
2696                 rt2800_rfcsr_write(rt2x00dev, 39, 0x36);
2697
2698                 rt2800_rfcsr_write(rt2x00dev, 45, 0xeb);
2699         } else if (rf->channel >= 100 && rf->channel <= 128) {
2700                 rfcsr = 0x32;
2701                 if (txbf_enabled)
2702                         rt2x00_set_field8(&rfcsr, RFCSR39_RX_DIV, 1);
2703                 rt2800_rfcsr_write(rt2x00dev, 39, rfcsr);
2704
2705                 rt2800_rfcsr_write(rt2x00dev, 45, 0xb3);
2706         } else {
2707                 rfcsr = 0x30;
2708                 if (txbf_enabled)
2709                         rt2x00_set_field8(&rfcsr, RFCSR39_RX_DIV, 1);
2710                 rt2800_rfcsr_write(rt2x00dev, 39, rfcsr);
2711
2712                 rt2800_rfcsr_write(rt2x00dev, 45, 0x9b);
2713         }
2714 }
2715
2716 #define POWER_BOUND             0x27
2717 #define POWER_BOUND_5G          0x2b
2718
2719 static void rt2800_config_channel_rf3290(struct rt2x00_dev *rt2x00dev,
2720                                          struct ieee80211_conf *conf,
2721                                          struct rf_channel *rf,
2722                                          struct channel_info *info)
2723 {
2724         u8 rfcsr;
2725
2726         rt2800_rfcsr_write(rt2x00dev, 8, rf->rf1);
2727         rt2800_rfcsr_write(rt2x00dev, 9, rf->rf3);
2728         rfcsr = rt2800_rfcsr_read(rt2x00dev, 11);
2729         rt2x00_set_field8(&rfcsr, RFCSR11_R, rf->rf2);
2730         rt2800_rfcsr_write(rt2x00dev, 11, rfcsr);
2731
2732         rfcsr = rt2800_rfcsr_read(rt2x00dev, 49);
2733         if (info->default_power1 > POWER_BOUND)
2734                 rt2x00_set_field8(&rfcsr, RFCSR49_TX, POWER_BOUND);
2735         else
2736                 rt2x00_set_field8(&rfcsr, RFCSR49_TX, info->default_power1);
2737         rt2800_rfcsr_write(rt2x00dev, 49, rfcsr);
2738
2739         rt2800_freq_cal_mode1(rt2x00dev);
2740
2741         if (rf->channel <= 14) {
2742                 if (rf->channel == 6)
2743                         rt2800_bbp_write(rt2x00dev, 68, 0x0c);
2744                 else
2745                         rt2800_bbp_write(rt2x00dev, 68, 0x0b);
2746
2747                 if (rf->channel >= 1 && rf->channel <= 6)
2748                         rt2800_bbp_write(rt2x00dev, 59, 0x0f);
2749                 else if (rf->channel >= 7 && rf->channel <= 11)
2750                         rt2800_bbp_write(rt2x00dev, 59, 0x0e);
2751                 else if (rf->channel >= 12 && rf->channel <= 14)
2752                         rt2800_bbp_write(rt2x00dev, 59, 0x0d);
2753         }
2754 }
2755
2756 static void rt2800_config_channel_rf3322(struct rt2x00_dev *rt2x00dev,
2757                                          struct ieee80211_conf *conf,
2758                                          struct rf_channel *rf,
2759                                          struct channel_info *info)
2760 {
2761         u8 rfcsr;
2762
2763         rt2800_rfcsr_write(rt2x00dev, 8, rf->rf1);
2764         rt2800_rfcsr_write(rt2x00dev, 9, rf->rf3);
2765
2766         rt2800_rfcsr_write(rt2x00dev, 11, 0x42);
2767         rt2800_rfcsr_write(rt2x00dev, 12, 0x1c);
2768         rt2800_rfcsr_write(rt2x00dev, 13, 0x00);
2769
2770         if (info->default_power1 > POWER_BOUND)
2771                 rt2800_rfcsr_write(rt2x00dev, 47, POWER_BOUND);
2772         else
2773                 rt2800_rfcsr_write(rt2x00dev, 47, info->default_power1);
2774
2775         if (info->default_power2 > POWER_BOUND)
2776                 rt2800_rfcsr_write(rt2x00dev, 48, POWER_BOUND);
2777         else
2778                 rt2800_rfcsr_write(rt2x00dev, 48, info->default_power2);
2779
2780         rt2800_freq_cal_mode1(rt2x00dev);
2781
2782         rfcsr = rt2800_rfcsr_read(rt2x00dev, 1);
2783         rt2x00_set_field8(&rfcsr, RFCSR1_RX0_PD, 1);
2784         rt2x00_set_field8(&rfcsr, RFCSR1_TX0_PD, 1);
2785
2786         if ( rt2x00dev->default_ant.tx_chain_num == 2 )
2787                 rt2x00_set_field8(&rfcsr, RFCSR1_TX1_PD, 1);
2788         else
2789                 rt2x00_set_field8(&rfcsr, RFCSR1_TX1_PD, 0);
2790
2791         if ( rt2x00dev->default_ant.rx_chain_num == 2 )
2792                 rt2x00_set_field8(&rfcsr, RFCSR1_RX1_PD, 1);
2793         else
2794                 rt2x00_set_field8(&rfcsr, RFCSR1_RX1_PD, 0);
2795
2796         rt2x00_set_field8(&rfcsr, RFCSR1_RX2_PD, 0);
2797         rt2x00_set_field8(&rfcsr, RFCSR1_TX2_PD, 0);
2798
2799         rt2800_rfcsr_write(rt2x00dev, 1, rfcsr);
2800
2801         rt2800_rfcsr_write(rt2x00dev, 31, 80);
2802 }
2803
2804 static void rt2800_config_channel_rf53xx(struct rt2x00_dev *rt2x00dev,
2805                                          struct ieee80211_conf *conf,
2806                                          struct rf_channel *rf,
2807                                          struct channel_info *info)
2808 {
2809         u8 rfcsr;
2810
2811         rt2800_rfcsr_write(rt2x00dev, 8, rf->rf1);
2812         rt2800_rfcsr_write(rt2x00dev, 9, rf->rf3);
2813         rfcsr = rt2800_rfcsr_read(rt2x00dev, 11);
2814         rt2x00_set_field8(&rfcsr, RFCSR11_R, rf->rf2);
2815         rt2800_rfcsr_write(rt2x00dev, 11, rfcsr);
2816
2817         rfcsr = rt2800_rfcsr_read(rt2x00dev, 49);
2818         if (info->default_power1 > POWER_BOUND)
2819                 rt2x00_set_field8(&rfcsr, RFCSR49_TX, POWER_BOUND);
2820         else
2821                 rt2x00_set_field8(&rfcsr, RFCSR49_TX, info->default_power1);
2822         rt2800_rfcsr_write(rt2x00dev, 49, rfcsr);
2823
2824         if (rt2x00_rt(rt2x00dev, RT5392)) {
2825                 rfcsr = rt2800_rfcsr_read(rt2x00dev, 50);
2826                 if (info->default_power2 > POWER_BOUND)
2827                         rt2x00_set_field8(&rfcsr, RFCSR50_TX, POWER_BOUND);
2828                 else
2829                         rt2x00_set_field8(&rfcsr, RFCSR50_TX,
2830                                           info->default_power2);
2831                 rt2800_rfcsr_write(rt2x00dev, 50, rfcsr);
2832         }
2833
2834         rfcsr = rt2800_rfcsr_read(rt2x00dev, 1);
2835         if (rt2x00_rt(rt2x00dev, RT5392)) {
2836                 rt2x00_set_field8(&rfcsr, RFCSR1_RX1_PD, 1);
2837                 rt2x00_set_field8(&rfcsr, RFCSR1_TX1_PD, 1);
2838         }
2839         rt2x00_set_field8(&rfcsr, RFCSR1_RF_BLOCK_EN, 1);
2840         rt2x00_set_field8(&rfcsr, RFCSR1_PLL_PD, 1);
2841         rt2x00_set_field8(&rfcsr, RFCSR1_RX0_PD, 1);
2842         rt2x00_set_field8(&rfcsr, RFCSR1_TX0_PD, 1);
2843         rt2800_rfcsr_write(rt2x00dev, 1, rfcsr);
2844
2845         rt2800_freq_cal_mode1(rt2x00dev);
2846
2847         if (rf->channel <= 14) {
2848                 int idx = rf->channel-1;
2849
2850                 if (rt2x00_has_cap_bt_coexist(rt2x00dev)) {
2851                         if (rt2x00_rt_rev_gte(rt2x00dev, RT5390, REV_RT5390F)) {
2852                                 /* r55/r59 value array of channel 1~14 */
2853                                 static const char r55_bt_rev[] = {0x83, 0x83,
2854                                         0x83, 0x73, 0x73, 0x63, 0x53, 0x53,
2855                                         0x53, 0x43, 0x43, 0x43, 0x43, 0x43};
2856                                 static const char r59_bt_rev[] = {0x0e, 0x0e,
2857                                         0x0e, 0x0e, 0x0e, 0x0b, 0x0a, 0x09,
2858                                         0x07, 0x07, 0x07, 0x07, 0x07, 0x07};
2859
2860                                 rt2800_rfcsr_write(rt2x00dev, 55,
2861                                                    r55_bt_rev[idx]);
2862                                 rt2800_rfcsr_write(rt2x00dev, 59,
2863                                                    r59_bt_rev[idx]);
2864                         } else {
2865                                 static const char r59_bt[] = {0x8b, 0x8b, 0x8b,
2866                                         0x8b, 0x8b, 0x8b, 0x8b, 0x8a, 0x89,
2867                                         0x88, 0x88, 0x86, 0x85, 0x84};
2868
2869                                 rt2800_rfcsr_write(rt2x00dev, 59, r59_bt[idx]);
2870                         }
2871                 } else {
2872                         if (rt2x00_rt_rev_gte(rt2x00dev, RT5390, REV_RT5390F)) {
2873                                 static const char r55_nonbt_rev[] = {0x23, 0x23,
2874                                         0x23, 0x23, 0x13, 0x13, 0x03, 0x03,
2875                                         0x03, 0x03, 0x03, 0x03, 0x03, 0x03};
2876                                 static const char r59_nonbt_rev[] = {0x07, 0x07,
2877                                         0x07, 0x07, 0x07, 0x07, 0x07, 0x07,
2878                                         0x07, 0x07, 0x06, 0x05, 0x04, 0x04};
2879
2880                                 rt2800_rfcsr_write(rt2x00dev, 55,
2881                                                    r55_nonbt_rev[idx]);
2882                                 rt2800_rfcsr_write(rt2x00dev, 59,
2883                                                    r59_nonbt_rev[idx]);
2884                         } else if (rt2x00_rt(rt2x00dev, RT5390) ||
2885                                    rt2x00_rt(rt2x00dev, RT5392) ||
2886                                    rt2x00_rt(rt2x00dev, RT6352)) {
2887                                 static const char r59_non_bt[] = {0x8f, 0x8f,
2888                                         0x8f, 0x8f, 0x8f, 0x8f, 0x8f, 0x8d,
2889                                         0x8a, 0x88, 0x88, 0x87, 0x87, 0x86};
2890
2891                                 rt2800_rfcsr_write(rt2x00dev, 59,
2892                                                    r59_non_bt[idx]);
2893                         } else if (rt2x00_rt(rt2x00dev, RT5350)) {
2894                                 static const char r59_non_bt[] = {0x0b, 0x0b,
2895                                         0x0b, 0x0b, 0x0b, 0x0b, 0x0b, 0x0a,
2896                                         0x0a, 0x09, 0x08, 0x07, 0x07, 0x06};
2897
2898                                 rt2800_rfcsr_write(rt2x00dev, 59,
2899                                                    r59_non_bt[idx]);
2900                         }
2901                 }
2902         }
2903 }
2904
2905 static void rt2800_config_channel_rf55xx(struct rt2x00_dev *rt2x00dev,
2906                                          struct ieee80211_conf *conf,
2907                                          struct rf_channel *rf,
2908                                          struct channel_info *info)
2909 {
2910         u8 rfcsr, ep_reg;
2911         u32 reg;
2912         int power_bound;
2913
2914         /* TODO */
2915         const bool is_11b = false;
2916         const bool is_type_ep = false;
2917
2918         reg = rt2800_register_read(rt2x00dev, LDO_CFG0);
2919         rt2x00_set_field32(&reg, LDO_CFG0_LDO_CORE_VLEVEL,
2920                            (rf->channel > 14 || conf_is_ht40(conf)) ? 5 : 0);
2921         rt2800_register_write(rt2x00dev, LDO_CFG0, reg);
2922
2923         /* Order of values on rf_channel entry: N, K, mod, R */
2924         rt2800_rfcsr_write(rt2x00dev, 8, rf->rf1 & 0xff);
2925
2926         rfcsr = rt2800_rfcsr_read(rt2x00dev,  9);
2927         rt2x00_set_field8(&rfcsr, RFCSR9_K, rf->rf2 & 0xf);
2928         rt2x00_set_field8(&rfcsr, RFCSR9_N, (rf->rf1 & 0x100) >> 8);
2929         rt2x00_set_field8(&rfcsr, RFCSR9_MOD, ((rf->rf3 - 8) & 0x4) >> 2);
2930         rt2800_rfcsr_write(rt2x00dev, 9, rfcsr);
2931
2932         rfcsr = rt2800_rfcsr_read(rt2x00dev, 11);
2933         rt2x00_set_field8(&rfcsr, RFCSR11_R, rf->rf4 - 1);
2934         rt2x00_set_field8(&rfcsr, RFCSR11_MOD, (rf->rf3 - 8) & 0x3);
2935         rt2800_rfcsr_write(rt2x00dev, 11, rfcsr);
2936
2937         if (rf->channel <= 14) {
2938                 rt2800_rfcsr_write(rt2x00dev, 10, 0x90);
2939                 /* FIXME: RF11 owerwrite ? */
2940                 rt2800_rfcsr_write(rt2x00dev, 11, 0x4A);
2941                 rt2800_rfcsr_write(rt2x00dev, 12, 0x52);
2942                 rt2800_rfcsr_write(rt2x00dev, 13, 0x42);
2943                 rt2800_rfcsr_write(rt2x00dev, 22, 0x40);
2944                 rt2800_rfcsr_write(rt2x00dev, 24, 0x4A);
2945                 rt2800_rfcsr_write(rt2x00dev, 25, 0x80);
2946                 rt2800_rfcsr_write(rt2x00dev, 27, 0x42);
2947                 rt2800_rfcsr_write(rt2x00dev, 36, 0x80);
2948                 rt2800_rfcsr_write(rt2x00dev, 37, 0x08);
2949                 rt2800_rfcsr_write(rt2x00dev, 38, 0x89);
2950                 rt2800_rfcsr_write(rt2x00dev, 39, 0x1B);
2951                 rt2800_rfcsr_write(rt2x00dev, 40, 0x0D);
2952                 rt2800_rfcsr_write(rt2x00dev, 41, 0x9B);
2953                 rt2800_rfcsr_write(rt2x00dev, 42, 0xD5);
2954                 rt2800_rfcsr_write(rt2x00dev, 43, 0x72);
2955                 rt2800_rfcsr_write(rt2x00dev, 44, 0x0E);
2956                 rt2800_rfcsr_write(rt2x00dev, 45, 0xA2);
2957                 rt2800_rfcsr_write(rt2x00dev, 46, 0x6B);
2958                 rt2800_rfcsr_write(rt2x00dev, 48, 0x10);
2959                 rt2800_rfcsr_write(rt2x00dev, 51, 0x3E);
2960                 rt2800_rfcsr_write(rt2x00dev, 52, 0x48);
2961                 rt2800_rfcsr_write(rt2x00dev, 54, 0x38);
2962                 rt2800_rfcsr_write(rt2x00dev, 56, 0xA1);
2963                 rt2800_rfcsr_write(rt2x00dev, 57, 0x00);
2964                 rt2800_rfcsr_write(rt2x00dev, 58, 0x39);
2965                 rt2800_rfcsr_write(rt2x00dev, 60, 0x45);
2966                 rt2800_rfcsr_write(rt2x00dev, 61, 0x91);
2967                 rt2800_rfcsr_write(rt2x00dev, 62, 0x39);
2968
2969                 /* TODO RF27 <- tssi */
2970
2971                 rfcsr = rf->channel <= 10 ? 0x07 : 0x06;
2972                 rt2800_rfcsr_write(rt2x00dev, 23, rfcsr);
2973                 rt2800_rfcsr_write(rt2x00dev, 59, rfcsr);
2974
2975                 if (is_11b) {
2976                         /* CCK */
2977                         rt2800_rfcsr_write(rt2x00dev, 31, 0xF8);
2978                         rt2800_rfcsr_write(rt2x00dev, 32, 0xC0);
2979                         if (is_type_ep)
2980                                 rt2800_rfcsr_write(rt2x00dev, 55, 0x06);
2981                         else
2982                                 rt2800_rfcsr_write(rt2x00dev, 55, 0x47);
2983                 } else {
2984                         /* OFDM */
2985                         if (is_type_ep)
2986                                 rt2800_rfcsr_write(rt2x00dev, 55, 0x03);
2987                         else
2988                                 rt2800_rfcsr_write(rt2x00dev, 55, 0x43);
2989                 }
2990
2991                 power_bound = POWER_BOUND;
2992                 ep_reg = 0x2;
2993         } else {
2994                 rt2800_rfcsr_write(rt2x00dev, 10, 0x97);
2995                 /* FIMXE: RF11 overwrite */
2996                 rt2800_rfcsr_write(rt2x00dev, 11, 0x40);
2997                 rt2800_rfcsr_write(rt2x00dev, 25, 0xBF);
2998                 rt2800_rfcsr_write(rt2x00dev, 27, 0x42);
2999                 rt2800_rfcsr_write(rt2x00dev, 36, 0x00);
3000                 rt2800_rfcsr_write(rt2x00dev, 37, 0x04);
3001                 rt2800_rfcsr_write(rt2x00dev, 38, 0x85);
3002                 rt2800_rfcsr_write(rt2x00dev, 40, 0x42);
3003                 rt2800_rfcsr_write(rt2x00dev, 41, 0xBB);
3004                 rt2800_rfcsr_write(rt2x00dev, 42, 0xD7);
3005                 rt2800_rfcsr_write(rt2x00dev, 45, 0x41);
3006                 rt2800_rfcsr_write(rt2x00dev, 48, 0x00);
3007                 rt2800_rfcsr_write(rt2x00dev, 57, 0x77);
3008                 rt2800_rfcsr_write(rt2x00dev, 60, 0x05);
3009                 rt2800_rfcsr_write(rt2x00dev, 61, 0x01);
3010
3011                 /* TODO RF27 <- tssi */
3012
3013                 if (rf->channel >= 36 && rf->channel <= 64) {
3014
3015                         rt2800_rfcsr_write(rt2x00dev, 12, 0x2E);
3016                         rt2800_rfcsr_write(rt2x00dev, 13, 0x22);
3017                         rt2800_rfcsr_write(rt2x00dev, 22, 0x60);
3018                         rt2800_rfcsr_write(rt2x00dev, 23, 0x7F);
3019                         if (rf->channel <= 50)
3020                                 rt2800_rfcsr_write(rt2x00dev, 24, 0x09);
3021                         else if (rf->channel >= 52)
3022                                 rt2800_rfcsr_write(rt2x00dev, 24, 0x07);
3023                         rt2800_rfcsr_write(rt2x00dev, 39, 0x1C);
3024                         rt2800_rfcsr_write(rt2x00dev, 43, 0x5B);
3025                         rt2800_rfcsr_write(rt2x00dev, 44, 0X40);
3026                         rt2800_rfcsr_write(rt2x00dev, 46, 0X00);
3027                         rt2800_rfcsr_write(rt2x00dev, 51, 0xFE);
3028                         rt2800_rfcsr_write(rt2x00dev, 52, 0x0C);
3029                         rt2800_rfcsr_write(rt2x00dev, 54, 0xF8);
3030                         if (rf->channel <= 50) {
3031                                 rt2800_rfcsr_write(rt2x00dev, 55, 0x06),
3032                                 rt2800_rfcsr_write(rt2x00dev, 56, 0xD3);
3033                         } else if (rf->channel >= 52) {
3034                                 rt2800_rfcsr_write(rt2x00dev, 55, 0x04);
3035                                 rt2800_rfcsr_write(rt2x00dev, 56, 0xBB);
3036                         }
3037
3038                         rt2800_rfcsr_write(rt2x00dev, 58, 0x15);
3039                         rt2800_rfcsr_write(rt2x00dev, 59, 0x7F);
3040                         rt2800_rfcsr_write(rt2x00dev, 62, 0x15);
3041
3042                 } else if (rf->channel >= 100 && rf->channel <= 165) {
3043
3044                         rt2800_rfcsr_write(rt2x00dev, 12, 0x0E);
3045                         rt2800_rfcsr_write(rt2x00dev, 13, 0x42);
3046                         rt2800_rfcsr_write(rt2x00dev, 22, 0x40);
3047                         if (rf->channel <= 153) {
3048                                 rt2800_rfcsr_write(rt2x00dev, 23, 0x3C);
3049                                 rt2800_rfcsr_write(rt2x00dev, 24, 0x06);
3050                         } else if (rf->channel >= 155) {
3051                                 rt2800_rfcsr_write(rt2x00dev, 23, 0x38);
3052                                 rt2800_rfcsr_write(rt2x00dev, 24, 0x05);
3053                         }
3054                         if (rf->channel <= 138) {
3055                                 rt2800_rfcsr_write(rt2x00dev, 39, 0x1A);
3056                                 rt2800_rfcsr_write(rt2x00dev, 43, 0x3B);
3057                                 rt2800_rfcsr_write(rt2x00dev, 44, 0x20);
3058                                 rt2800_rfcsr_write(rt2x00dev, 46, 0x18);
3059                         } else if (rf->channel >= 140) {
3060                                 rt2800_rfcsr_write(rt2x00dev, 39, 0x18);
3061                                 rt2800_rfcsr_write(rt2x00dev, 43, 0x1B);
3062                                 rt2800_rfcsr_write(rt2x00dev, 44, 0x10);
3063                                 rt2800_rfcsr_write(rt2x00dev, 46, 0X08);
3064                         }
3065                         if (rf->channel <= 124)
3066                                 rt2800_rfcsr_write(rt2x00dev, 51, 0xFC);
3067                         else if (rf->channel >= 126)
3068                                 rt2800_rfcsr_write(rt2x00dev, 51, 0xEC);
3069                         if (rf->channel <= 138)
3070                                 rt2800_rfcsr_write(rt2x00dev, 52, 0x06);
3071                         else if (rf->channel >= 140)
3072                                 rt2800_rfcsr_write(rt2x00dev, 52, 0x06);
3073                         rt2800_rfcsr_write(rt2x00dev, 54, 0xEB);
3074                         if (rf->channel <= 138)
3075                                 rt2800_rfcsr_write(rt2x00dev, 55, 0x01);
3076                         else if (rf->channel >= 140)
3077                                 rt2800_rfcsr_write(rt2x00dev, 55, 0x00);
3078                         if (rf->channel <= 128)
3079                                 rt2800_rfcsr_write(rt2x00dev, 56, 0xBB);
3080                         else if (rf->channel >= 130)
3081                                 rt2800_rfcsr_write(rt2x00dev, 56, 0xAB);
3082                         if (rf->channel <= 116)
3083                                 rt2800_rfcsr_write(rt2x00dev, 58, 0x1D);
3084                         else if (rf->channel >= 118)
3085                                 rt2800_rfcsr_write(rt2x00dev, 58, 0x15);
3086                         if (rf->channel <= 138)
3087                                 rt2800_rfcsr_write(rt2x00dev, 59, 0x3F);
3088                         else if (rf->channel >= 140)
3089                                 rt2800_rfcsr_write(rt2x00dev, 59, 0x7C);
3090                         if (rf->channel <= 116)
3091                                 rt2800_rfcsr_write(rt2x00dev, 62, 0x1D);
3092                         else if (rf->channel >= 118)
3093                                 rt2800_rfcsr_write(rt2x00dev, 62, 0x15);
3094                 }
3095
3096                 power_bound = POWER_BOUND_5G;
3097                 ep_reg = 0x3;
3098         }
3099
3100         rfcsr = rt2800_rfcsr_read(rt2x00dev, 49);
3101         if (info->default_power1 > power_bound)
3102                 rt2x00_set_field8(&rfcsr, RFCSR49_TX, power_bound);
3103         else
3104                 rt2x00_set_field8(&rfcsr, RFCSR49_TX, info->default_power1);
3105         if (is_type_ep)
3106                 rt2x00_set_field8(&rfcsr, RFCSR49_EP, ep_reg);
3107         rt2800_rfcsr_write(rt2x00dev, 49, rfcsr);
3108
3109         rfcsr = rt2800_rfcsr_read(rt2x00dev, 50);
3110         if (info->default_power2 > power_bound)
3111                 rt2x00_set_field8(&rfcsr, RFCSR50_TX, power_bound);
3112         else
3113                 rt2x00_set_field8(&rfcsr, RFCSR50_TX, info->default_power2);
3114         if (is_type_ep)
3115                 rt2x00_set_field8(&rfcsr, RFCSR50_EP, ep_reg);
3116         rt2800_rfcsr_write(rt2x00dev, 50, rfcsr);
3117
3118         rfcsr = rt2800_rfcsr_read(rt2x00dev, 1);
3119         rt2x00_set_field8(&rfcsr, RFCSR1_RF_BLOCK_EN, 1);
3120         rt2x00_set_field8(&rfcsr, RFCSR1_PLL_PD, 1);
3121
3122         rt2x00_set_field8(&rfcsr, RFCSR1_TX0_PD,
3123                           rt2x00dev->default_ant.tx_chain_num >= 1);
3124         rt2x00_set_field8(&rfcsr, RFCSR1_TX1_PD,
3125                           rt2x00dev->default_ant.tx_chain_num == 2);
3126         rt2x00_set_field8(&rfcsr, RFCSR1_TX2_PD, 0);
3127
3128         rt2x00_set_field8(&rfcsr, RFCSR1_RX0_PD,
3129                           rt2x00dev->default_ant.rx_chain_num >= 1);
3130         rt2x00_set_field8(&rfcsr, RFCSR1_RX1_PD,
3131                           rt2x00dev->default_ant.rx_chain_num == 2);
3132         rt2x00_set_field8(&rfcsr, RFCSR1_RX2_PD, 0);
3133
3134         rt2800_rfcsr_write(rt2x00dev, 1, rfcsr);
3135         rt2800_rfcsr_write(rt2x00dev, 6, 0xe4);
3136
3137         if (conf_is_ht40(conf))
3138                 rt2800_rfcsr_write(rt2x00dev, 30, 0x16);
3139         else
3140                 rt2800_rfcsr_write(rt2x00dev, 30, 0x10);
3141
3142         if (!is_11b) {
3143                 rt2800_rfcsr_write(rt2x00dev, 31, 0x80);
3144                 rt2800_rfcsr_write(rt2x00dev, 32, 0x80);
3145         }
3146
3147         /* TODO proper frequency adjustment */
3148         rt2800_freq_cal_mode1(rt2x00dev);
3149
3150         /* TODO merge with others */
3151         rfcsr = rt2800_rfcsr_read(rt2x00dev, 3);
3152         rt2x00_set_field8(&rfcsr, RFCSR3_VCOCAL_EN, 1);
3153         rt2800_rfcsr_write(rt2x00dev, 3, rfcsr);
3154
3155         /* BBP settings */
3156         rt2800_bbp_write(rt2x00dev, 62, 0x37 - rt2x00dev->lna_gain);
3157         rt2800_bbp_write(rt2x00dev, 63, 0x37 - rt2x00dev->lna_gain);
3158         rt2800_bbp_write(rt2x00dev, 64, 0x37 - rt2x00dev->lna_gain);
3159
3160         rt2800_bbp_write(rt2x00dev, 79, (rf->channel <= 14) ? 0x1C : 0x18);
3161         rt2800_bbp_write(rt2x00dev, 80, (rf->channel <= 14) ? 0x0E : 0x08);
3162         rt2800_bbp_write(rt2x00dev, 81, (rf->channel <= 14) ? 0x3A : 0x38);
3163         rt2800_bbp_write(rt2x00dev, 82, (rf->channel <= 14) ? 0x62 : 0x92);
3164
3165         /* GLRT band configuration */
3166         rt2800_bbp_write(rt2x00dev, 195, 128);
3167         rt2800_bbp_write(rt2x00dev, 196, (rf->channel <= 14) ? 0xE0 : 0xF0);
3168         rt2800_bbp_write(rt2x00dev, 195, 129);
3169         rt2800_bbp_write(rt2x00dev, 196, (rf->channel <= 14) ? 0x1F : 0x1E);
3170         rt2800_bbp_write(rt2x00dev, 195, 130);
3171         rt2800_bbp_write(rt2x00dev, 196, (rf->channel <= 14) ? 0x38 : 0x28);
3172         rt2800_bbp_write(rt2x00dev, 195, 131);
3173         rt2800_bbp_write(rt2x00dev, 196, (rf->channel <= 14) ? 0x32 : 0x20);
3174         rt2800_bbp_write(rt2x00dev, 195, 133);
3175         rt2800_bbp_write(rt2x00dev, 196, (rf->channel <= 14) ? 0x28 : 0x7F);
3176         rt2800_bbp_write(rt2x00dev, 195, 124);
3177         rt2800_bbp_write(rt2x00dev, 196, (rf->channel <= 14) ? 0x19 : 0x7F);
3178 }
3179
3180 static void rt2800_config_channel_rf7620(struct rt2x00_dev *rt2x00dev,
3181                                          struct ieee80211_conf *conf,
3182                                          struct rf_channel *rf,
3183                                          struct channel_info *info)
3184 {
3185         struct rt2800_drv_data *drv_data = rt2x00dev->drv_data;
3186         u8 rx_agc_fc, tx_agc_fc;
3187         u8 rfcsr;
3188
3189         /* Frequeny plan setting */
3190         /* Rdiv setting (set 0x03 if Xtal==20)
3191          * R13[1:0]
3192          */
3193         rfcsr = rt2800_rfcsr_read(rt2x00dev, 13);
3194         rt2x00_set_field8(&rfcsr, RFCSR13_RDIV_MT7620,
3195                           rt2800_clk_is_20mhz(rt2x00dev) ? 3 : 0);
3196         rt2800_rfcsr_write(rt2x00dev, 13, rfcsr);
3197
3198         /* N setting
3199          * R20[7:0] in rf->rf1
3200          * R21[0] always 0
3201          */
3202         rfcsr = rt2800_rfcsr_read(rt2x00dev, 20);
3203         rfcsr = (rf->rf1 & 0x00ff);
3204         rt2800_rfcsr_write(rt2x00dev, 20, rfcsr);
3205
3206         rfcsr = rt2800_rfcsr_read(rt2x00dev, 21);
3207         rt2x00_set_field8(&rfcsr, RFCSR21_BIT1, 0);
3208         rt2800_rfcsr_write(rt2x00dev, 21, rfcsr);
3209
3210         /* K setting (always 0)
3211          * R16[3:0] (RF PLL freq selection)
3212          */
3213         rfcsr = rt2800_rfcsr_read(rt2x00dev, 16);
3214         rt2x00_set_field8(&rfcsr, RFCSR16_RF_PLL_FREQ_SEL_MT7620, 0);
3215         rt2800_rfcsr_write(rt2x00dev, 16, rfcsr);
3216
3217         /* D setting (always 0)
3218          * R22[2:0] (D=15, R22[2:0]=<111>)
3219          */
3220         rfcsr = rt2800_rfcsr_read(rt2x00dev, 22);
3221         rt2x00_set_field8(&rfcsr, RFCSR22_FREQPLAN_D_MT7620, 0);
3222         rt2800_rfcsr_write(rt2x00dev, 22, rfcsr);
3223
3224         /* Ksd setting
3225          * Ksd: R17<7:0> in rf->rf2
3226          *      R18<7:0> in rf->rf3
3227          *      R19<1:0> in rf->rf4
3228          */
3229         rfcsr = rt2800_rfcsr_read(rt2x00dev, 17);
3230         rfcsr = rf->rf2;
3231         rt2800_rfcsr_write(rt2x00dev, 17, rfcsr);
3232
3233         rfcsr = rt2800_rfcsr_read(rt2x00dev, 18);
3234         rfcsr = rf->rf3;
3235         rt2800_rfcsr_write(rt2x00dev, 18, rfcsr);
3236
3237         rfcsr = rt2800_rfcsr_read(rt2x00dev, 19);
3238         rt2x00_set_field8(&rfcsr, RFCSR19_K, rf->rf4);
3239         rt2800_rfcsr_write(rt2x00dev, 19, rfcsr);
3240
3241         /* Default: XO=20MHz , SDM mode */
3242         rfcsr = rt2800_rfcsr_read(rt2x00dev, 16);
3243         rt2x00_set_field8(&rfcsr, RFCSR16_SDM_MODE_MT7620, 0x80);
3244         rt2800_rfcsr_write(rt2x00dev, 16, rfcsr);
3245
3246         rfcsr = rt2800_rfcsr_read(rt2x00dev, 21);
3247         rt2x00_set_field8(&rfcsr, RFCSR21_BIT8, 1);
3248         rt2800_rfcsr_write(rt2x00dev, 21, rfcsr);
3249
3250         rfcsr = rt2800_rfcsr_read(rt2x00dev, 1);
3251         rt2x00_set_field8(&rfcsr, RFCSR1_TX2_EN_MT7620,
3252                           rt2x00dev->default_ant.tx_chain_num != 1);
3253         rt2800_rfcsr_write(rt2x00dev, 1, rfcsr);
3254
3255         rfcsr = rt2800_rfcsr_read(rt2x00dev, 2);
3256         rt2x00_set_field8(&rfcsr, RFCSR2_TX2_EN_MT7620,
3257                           rt2x00dev->default_ant.tx_chain_num != 1);
3258         rt2x00_set_field8(&rfcsr, RFCSR2_RX2_EN_MT7620,
3259                           rt2x00dev->default_ant.rx_chain_num != 1);
3260         rt2800_rfcsr_write(rt2x00dev, 2, rfcsr);
3261
3262         rfcsr = rt2800_rfcsr_read(rt2x00dev, 42);
3263         rt2x00_set_field8(&rfcsr, RFCSR42_TX2_EN_MT7620,
3264                           rt2x00dev->default_ant.tx_chain_num != 1);
3265         rt2800_rfcsr_write(rt2x00dev, 42, rfcsr);
3266
3267         /* RF for DC Cal BW */
3268         if (conf_is_ht40(conf)) {
3269                 rt2800_rfcsr_write_dccal(rt2x00dev, 6, 0x10);
3270                 rt2800_rfcsr_write_dccal(rt2x00dev, 7, 0x10);
3271                 rt2800_rfcsr_write_dccal(rt2x00dev, 8, 0x04);
3272                 rt2800_rfcsr_write_dccal(rt2x00dev, 58, 0x10);
3273                 rt2800_rfcsr_write_dccal(rt2x00dev, 59, 0x10);
3274         } else {
3275                 rt2800_rfcsr_write_dccal(rt2x00dev, 6, 0x20);
3276                 rt2800_rfcsr_write_dccal(rt2x00dev, 7, 0x20);
3277                 rt2800_rfcsr_write_dccal(rt2x00dev, 8, 0x00);
3278                 rt2800_rfcsr_write_dccal(rt2x00dev, 58, 0x20);
3279                 rt2800_rfcsr_write_dccal(rt2x00dev, 59, 0x20);
3280         }
3281
3282         if (conf_is_ht40(conf)) {
3283                 rt2800_rfcsr_write_dccal(rt2x00dev, 58, 0x08);
3284                 rt2800_rfcsr_write_dccal(rt2x00dev, 59, 0x08);
3285         } else {
3286                 rt2800_rfcsr_write_dccal(rt2x00dev, 58, 0x28);
3287                 rt2800_rfcsr_write_dccal(rt2x00dev, 59, 0x28);
3288         }
3289
3290         rfcsr = rt2800_rfcsr_read(rt2x00dev, 28);
3291         rt2x00_set_field8(&rfcsr, RFCSR28_CH11_HT40,
3292                           conf_is_ht40(conf) && (rf->channel == 11));
3293         rt2800_rfcsr_write(rt2x00dev, 28, rfcsr);
3294
3295         if (!test_bit(DEVICE_STATE_SCANNING, &rt2x00dev->flags)) {
3296                 if (conf_is_ht40(conf)) {
3297                         rx_agc_fc = drv_data->rx_calibration_bw40;
3298                         tx_agc_fc = drv_data->tx_calibration_bw40;
3299                 } else {
3300                         rx_agc_fc = drv_data->rx_calibration_bw20;
3301                         tx_agc_fc = drv_data->tx_calibration_bw20;
3302                 }
3303                 rfcsr = rt2800_rfcsr_read_bank(rt2x00dev, 5, 6);
3304                 rfcsr &= (~0x3F);
3305                 rfcsr |= rx_agc_fc;
3306                 rt2800_rfcsr_write_bank(rt2x00dev, 5, 6, rfcsr);
3307                 rfcsr = rt2800_rfcsr_read_bank(rt2x00dev, 5, 7);
3308                 rfcsr &= (~0x3F);
3309                 rfcsr |= rx_agc_fc;
3310                 rt2800_rfcsr_write_bank(rt2x00dev, 5, 7, rfcsr);
3311                 rfcsr = rt2800_rfcsr_read_bank(rt2x00dev, 7, 6);
3312                 rfcsr &= (~0x3F);
3313                 rfcsr |= rx_agc_fc;
3314                 rt2800_rfcsr_write_bank(rt2x00dev, 7, 6, rfcsr);
3315                 rfcsr = rt2800_rfcsr_read_bank(rt2x00dev, 7, 7);
3316                 rfcsr &= (~0x3F);
3317                 rfcsr |= rx_agc_fc;
3318                 rt2800_rfcsr_write_bank(rt2x00dev, 7, 7, rfcsr);
3319
3320                 rfcsr = rt2800_rfcsr_read_bank(rt2x00dev, 5, 58);
3321                 rfcsr &= (~0x3F);
3322                 rfcsr |= tx_agc_fc;
3323                 rt2800_rfcsr_write_bank(rt2x00dev, 5, 58, rfcsr);
3324                 rfcsr = rt2800_rfcsr_read_bank(rt2x00dev, 5, 59);
3325                 rfcsr &= (~0x3F);
3326                 rfcsr |= tx_agc_fc;
3327                 rt2800_rfcsr_write_bank(rt2x00dev, 5, 59, rfcsr);
3328                 rfcsr = rt2800_rfcsr_read_bank(rt2x00dev, 7, 58);
3329                 rfcsr &= (~0x3F);
3330                 rfcsr |= tx_agc_fc;
3331                 rt2800_rfcsr_write_bank(rt2x00dev, 7, 58, rfcsr);
3332                 rfcsr = rt2800_rfcsr_read_bank(rt2x00dev, 7, 59);
3333                 rfcsr &= (~0x3F);
3334                 rfcsr |= tx_agc_fc;
3335                 rt2800_rfcsr_write_bank(rt2x00dev, 7, 59, rfcsr);
3336         }
3337 }
3338
3339 static void rt2800_config_alc(struct rt2x00_dev *rt2x00dev,
3340                               struct ieee80211_channel *chan,
3341                               int power_level) {
3342         u16 eeprom, target_power, max_power;
3343         u32 mac_sys_ctrl, mac_status;
3344         u32 reg;
3345         u8 bbp;
3346         int i;
3347
3348         /* hardware unit is 0.5dBm, limited to 23.5dBm */
3349         power_level *= 2;
3350         if (power_level > 0x2f)
3351                 power_level = 0x2f;
3352
3353         max_power = chan->max_power * 2;
3354         if (max_power > 0x2f)
3355                 max_power = 0x2f;
3356
3357         reg = rt2800_register_read(rt2x00dev, TX_ALC_CFG_0);
3358         rt2x00_set_field32(&reg, TX_ALC_CFG_0_CH_INIT_0, power_level);
3359         rt2x00_set_field32(&reg, TX_ALC_CFG_0_CH_INIT_1, power_level);
3360         rt2x00_set_field32(&reg, TX_ALC_CFG_0_LIMIT_0, max_power);
3361         rt2x00_set_field32(&reg, TX_ALC_CFG_0_LIMIT_1, max_power);
3362
3363         eeprom = rt2800_eeprom_read(rt2x00dev, EEPROM_NIC_CONF1);
3364         if (rt2x00_get_field16(eeprom, EEPROM_NIC_CONF1_INTERNAL_TX_ALC)) {
3365                 /* init base power by eeprom target power */
3366                 target_power = rt2800_eeprom_read(rt2x00dev,
3367                                                   EEPROM_TXPOWER_INIT);
3368                 rt2x00_set_field32(&reg, TX_ALC_CFG_0_CH_INIT_0, target_power);
3369                 rt2x00_set_field32(&reg, TX_ALC_CFG_0_CH_INIT_1, target_power);
3370         }
3371         rt2800_register_write(rt2x00dev, TX_ALC_CFG_0, reg);
3372
3373         reg = rt2800_register_read(rt2x00dev, TX_ALC_CFG_1);
3374         rt2x00_set_field32(&reg, TX_ALC_CFG_1_TX_TEMP_COMP, 0);
3375         rt2800_register_write(rt2x00dev, TX_ALC_CFG_1, reg);
3376
3377         /* Save MAC SYS CTRL registers */
3378         mac_sys_ctrl = rt2800_register_read(rt2x00dev, MAC_SYS_CTRL);
3379         /* Disable Tx/Rx */
3380         rt2800_register_write(rt2x00dev, MAC_SYS_CTRL, 0);
3381         /* Check MAC Tx/Rx idle */
3382         for (i = 0; i < 10000; i++) {
3383                 mac_status = rt2800_register_read(rt2x00dev, MAC_STATUS_CFG);
3384                 if (mac_status & 0x3)
3385                         usleep_range(50, 200);
3386                 else
3387                         break;
3388         }
3389
3390         if (i == 10000)
3391                 rt2x00_warn(rt2x00dev, "Wait MAC Status to MAX !!!\n");
3392
3393         if (chan->center_freq > 2457) {
3394                 bbp = rt2800_bbp_read(rt2x00dev, 30);
3395                 bbp = 0x40;
3396                 rt2800_bbp_write(rt2x00dev, 30, bbp);
3397                 rt2800_rfcsr_write(rt2x00dev, 39, 0);
3398                 if (rt2x00_has_cap_external_lna_bg(rt2x00dev))
3399                         rt2800_rfcsr_write(rt2x00dev, 42, 0xfb);
3400                 else
3401                         rt2800_rfcsr_write(rt2x00dev, 42, 0x7b);
3402         } else {
3403                 bbp = rt2800_bbp_read(rt2x00dev, 30);
3404                 bbp = 0x1f;
3405                 rt2800_bbp_write(rt2x00dev, 30, bbp);
3406                 rt2800_rfcsr_write(rt2x00dev, 39, 0x80);
3407                 if (rt2x00_has_cap_external_lna_bg(rt2x00dev))
3408                         rt2800_rfcsr_write(rt2x00dev, 42, 0xdb);
3409                 else
3410                         rt2800_rfcsr_write(rt2x00dev, 42, 0x5b);
3411         }
3412         rt2800_register_write(rt2x00dev, MAC_SYS_CTRL, mac_sys_ctrl);
3413
3414         rt2800_vco_calibration(rt2x00dev);
3415 }
3416
3417 static void rt2800_bbp_write_with_rx_chain(struct rt2x00_dev *rt2x00dev,
3418                                            const unsigned int word,
3419                                            const u8 value)
3420 {
3421         u8 chain, reg;
3422
3423         for (chain = 0; chain < rt2x00dev->default_ant.rx_chain_num; chain++) {
3424                 reg = rt2800_bbp_read(rt2x00dev, 27);
3425                 rt2x00_set_field8(&reg,  BBP27_RX_CHAIN_SEL, chain);
3426                 rt2800_bbp_write(rt2x00dev, 27, reg);
3427
3428                 rt2800_bbp_write(rt2x00dev, word, value);
3429         }
3430 }
3431
3432 static void rt2800_iq_calibrate(struct rt2x00_dev *rt2x00dev, int channel)
3433 {
3434         u8 cal;
3435
3436         /* TX0 IQ Gain */
3437         rt2800_bbp_write(rt2x00dev, 158, 0x2c);
3438         if (channel <= 14)
3439                 cal = rt2x00_eeprom_byte(rt2x00dev, EEPROM_IQ_GAIN_CAL_TX0_2G);
3440         else if (channel >= 36 && channel <= 64)
3441                 cal = rt2x00_eeprom_byte(rt2x00dev,
3442                                          EEPROM_IQ_GAIN_CAL_TX0_CH36_TO_CH64_5G);
3443         else if (channel >= 100 && channel <= 138)
3444                 cal = rt2x00_eeprom_byte(rt2x00dev,
3445                                          EEPROM_IQ_GAIN_CAL_TX0_CH100_TO_CH138_5G);
3446         else if (channel >= 140 && channel <= 165)
3447                 cal = rt2x00_eeprom_byte(rt2x00dev,
3448                                          EEPROM_IQ_GAIN_CAL_TX0_CH140_TO_CH165_5G);
3449         else
3450                 cal = 0;
3451         rt2800_bbp_write(rt2x00dev, 159, cal);
3452
3453         /* TX0 IQ Phase */
3454         rt2800_bbp_write(rt2x00dev, 158, 0x2d);
3455         if (channel <= 14)
3456                 cal = rt2x00_eeprom_byte(rt2x00dev, EEPROM_IQ_PHASE_CAL_TX0_2G);
3457         else if (channel >= 36 && channel <= 64)
3458                 cal = rt2x00_eeprom_byte(rt2x00dev,
3459                                          EEPROM_IQ_PHASE_CAL_TX0_CH36_TO_CH64_5G);
3460         else if (channel >= 100 && channel <= 138)
3461                 cal = rt2x00_eeprom_byte(rt2x00dev,
3462                                          EEPROM_IQ_PHASE_CAL_TX0_CH100_TO_CH138_5G);
3463         else if (channel >= 140 && channel <= 165)
3464                 cal = rt2x00_eeprom_byte(rt2x00dev,
3465                                          EEPROM_IQ_PHASE_CAL_TX0_CH140_TO_CH165_5G);
3466         else
3467                 cal = 0;
3468         rt2800_bbp_write(rt2x00dev, 159, cal);
3469
3470         /* TX1 IQ Gain */
3471         rt2800_bbp_write(rt2x00dev, 158, 0x4a);
3472         if (channel <= 14)
3473                 cal = rt2x00_eeprom_byte(rt2x00dev, EEPROM_IQ_GAIN_CAL_TX1_2G);
3474         else if (channel >= 36 && channel <= 64)
3475                 cal = rt2x00_eeprom_byte(rt2x00dev,
3476                                          EEPROM_IQ_GAIN_CAL_TX1_CH36_TO_CH64_5G);
3477         else if (channel >= 100 && channel <= 138)
3478                 cal = rt2x00_eeprom_byte(rt2x00dev,
3479                                          EEPROM_IQ_GAIN_CAL_TX1_CH100_TO_CH138_5G);
3480         else if (channel >= 140 && channel <= 165)
3481                 cal = rt2x00_eeprom_byte(rt2x00dev,
3482                                          EEPROM_IQ_GAIN_CAL_TX1_CH140_TO_CH165_5G);
3483         else
3484                 cal = 0;
3485         rt2800_bbp_write(rt2x00dev, 159, cal);
3486
3487         /* TX1 IQ Phase */
3488         rt2800_bbp_write(rt2x00dev, 158, 0x4b);
3489         if (channel <= 14)
3490                 cal = rt2x00_eeprom_byte(rt2x00dev, EEPROM_IQ_PHASE_CAL_TX1_2G);
3491         else if (channel >= 36 && channel <= 64)
3492                 cal = rt2x00_eeprom_byte(rt2x00dev,
3493                                          EEPROM_IQ_PHASE_CAL_TX1_CH36_TO_CH64_5G);
3494         else if (channel >= 100 && channel <= 138)
3495                 cal = rt2x00_eeprom_byte(rt2x00dev,
3496                                          EEPROM_IQ_PHASE_CAL_TX1_CH100_TO_CH138_5G);
3497         else if (channel >= 140 && channel <= 165)
3498                 cal = rt2x00_eeprom_byte(rt2x00dev,
3499                                          EEPROM_IQ_PHASE_CAL_TX1_CH140_TO_CH165_5G);
3500         else
3501                 cal = 0;
3502         rt2800_bbp_write(rt2x00dev, 159, cal);
3503
3504         /* FIXME: possible RX0, RX1 callibration ? */
3505
3506         /* RF IQ compensation control */
3507         rt2800_bbp_write(rt2x00dev, 158, 0x04);
3508         cal = rt2x00_eeprom_byte(rt2x00dev, EEPROM_RF_IQ_COMPENSATION_CONTROL);
3509         rt2800_bbp_write(rt2x00dev, 159, cal != 0xff ? cal : 0);
3510
3511         /* RF IQ imbalance compensation control */
3512         rt2800_bbp_write(rt2x00dev, 158, 0x03);
3513         cal = rt2x00_eeprom_byte(rt2x00dev,
3514                                  EEPROM_RF_IQ_IMBALANCE_COMPENSATION_CONTROL);
3515         rt2800_bbp_write(rt2x00dev, 159, cal != 0xff ? cal : 0);
3516 }
3517
3518 static char rt2800_txpower_to_dev(struct rt2x00_dev *rt2x00dev,
3519                                   unsigned int channel,
3520                                   char txpower)
3521 {
3522         if (rt2x00_rt(rt2x00dev, RT3593))
3523                 txpower = rt2x00_get_field8(txpower, EEPROM_TXPOWER_ALC);
3524
3525         if (channel <= 14)
3526                 return clamp_t(char, txpower, MIN_G_TXPOWER, MAX_G_TXPOWER);
3527
3528         if (rt2x00_rt(rt2x00dev, RT3593))
3529                 return clamp_t(char, txpower, MIN_A_TXPOWER_3593,
3530                                MAX_A_TXPOWER_3593);
3531         else
3532                 return clamp_t(char, txpower, MIN_A_TXPOWER, MAX_A_TXPOWER);
3533 }
3534
3535 static void rt2800_config_channel(struct rt2x00_dev *rt2x00dev,
3536                                   struct ieee80211_conf *conf,
3537                                   struct rf_channel *rf,
3538                                   struct channel_info *info)
3539 {
3540         u32 reg;
3541         u32 tx_pin;
3542         u8 bbp, rfcsr;
3543
3544         info->default_power1 = rt2800_txpower_to_dev(rt2x00dev, rf->channel,
3545                                                      info->default_power1);
3546         info->default_power2 = rt2800_txpower_to_dev(rt2x00dev, rf->channel,
3547                                                      info->default_power2);
3548         if (rt2x00dev->default_ant.tx_chain_num > 2)
3549                 info->default_power3 =
3550                         rt2800_txpower_to_dev(rt2x00dev, rf->channel,
3551                                               info->default_power3);
3552
3553         switch (rt2x00dev->chip.rf) {
3554         case RF2020:
3555         case RF3020:
3556         case RF3021:
3557         case RF3022:
3558         case RF3320:
3559                 rt2800_config_channel_rf3xxx(rt2x00dev, conf, rf, info);
3560                 break;
3561         case RF3052:
3562                 rt2800_config_channel_rf3052(rt2x00dev, conf, rf, info);
3563                 break;
3564         case RF3053:
3565                 rt2800_config_channel_rf3053(rt2x00dev, conf, rf, info);
3566                 break;
3567         case RF3290:
3568                 rt2800_config_channel_rf3290(rt2x00dev, conf, rf, info);
3569                 break;
3570         case RF3322:
3571                 rt2800_config_channel_rf3322(rt2x00dev, conf, rf, info);
3572                 break;
3573         case RF3070:
3574         case RF5350:
3575         case RF5360:
3576         case RF5362:
3577         case RF5370:
3578         case RF5372:
3579         case RF5390:
3580         case RF5392:
3581                 rt2800_config_channel_rf53xx(rt2x00dev, conf, rf, info);
3582                 break;
3583         case RF5592:
3584                 rt2800_config_channel_rf55xx(rt2x00dev, conf, rf, info);
3585                 break;
3586         case RF7620:
3587                 rt2800_config_channel_rf7620(rt2x00dev, conf, rf, info);
3588                 break;
3589         default:
3590                 rt2800_config_channel_rf2xxx(rt2x00dev, conf, rf, info);
3591         }
3592
3593         if (rt2x00_rf(rt2x00dev, RF3070) ||
3594             rt2x00_rf(rt2x00dev, RF3290) ||
3595             rt2x00_rf(rt2x00dev, RF3322) ||
3596             rt2x00_rf(rt2x00dev, RF5350) ||
3597             rt2x00_rf(rt2x00dev, RF5360) ||
3598             rt2x00_rf(rt2x00dev, RF5362) ||
3599             rt2x00_rf(rt2x00dev, RF5370) ||
3600             rt2x00_rf(rt2x00dev, RF5372) ||
3601             rt2x00_rf(rt2x00dev, RF5390) ||
3602             rt2x00_rf(rt2x00dev, RF5392)) {
3603                 rfcsr = rt2800_rfcsr_read(rt2x00dev, 30);
3604                 if (rt2x00_rf(rt2x00dev, RF3322)) {
3605                         rt2x00_set_field8(&rfcsr, RF3322_RFCSR30_TX_H20M,
3606                                           conf_is_ht40(conf));
3607                         rt2x00_set_field8(&rfcsr, RF3322_RFCSR30_RX_H20M,
3608                                           conf_is_ht40(conf));
3609                 } else {
3610                         rt2x00_set_field8(&rfcsr, RFCSR30_TX_H20M,
3611                                           conf_is_ht40(conf));
3612                         rt2x00_set_field8(&rfcsr, RFCSR30_RX_H20M,
3613                                           conf_is_ht40(conf));
3614                 }
3615                 rt2800_rfcsr_write(rt2x00dev, 30, rfcsr);
3616
3617                 rfcsr = rt2800_rfcsr_read(rt2x00dev, 3);
3618                 rt2x00_set_field8(&rfcsr, RFCSR3_VCOCAL_EN, 1);
3619                 rt2800_rfcsr_write(rt2x00dev, 3, rfcsr);
3620         }
3621
3622         /*
3623          * Change BBP settings
3624          */
3625
3626         if (rt2x00_rt(rt2x00dev, RT3352)) {
3627                 rt2800_bbp_write(rt2x00dev, 62, 0x37 - rt2x00dev->lna_gain);
3628                 rt2800_bbp_write(rt2x00dev, 63, 0x37 - rt2x00dev->lna_gain);
3629                 rt2800_bbp_write(rt2x00dev, 64, 0x37 - rt2x00dev->lna_gain);
3630
3631                 rt2800_bbp_write(rt2x00dev, 27, 0x0);
3632                 rt2800_bbp_write(rt2x00dev, 66, 0x26 + rt2x00dev->lna_gain);
3633                 rt2800_bbp_write(rt2x00dev, 27, 0x20);
3634                 rt2800_bbp_write(rt2x00dev, 66, 0x26 + rt2x00dev->lna_gain);
3635                 rt2800_bbp_write(rt2x00dev, 86, 0x38);
3636                 rt2800_bbp_write(rt2x00dev, 83, 0x6a);
3637         } else if (rt2x00_rt(rt2x00dev, RT3593)) {
3638                 if (rf->channel > 14) {
3639                         /* Disable CCK Packet detection on 5GHz */
3640                         rt2800_bbp_write(rt2x00dev, 70, 0x00);
3641                 } else {
3642                         rt2800_bbp_write(rt2x00dev, 70, 0x0a);
3643                 }
3644
3645                 if (conf_is_ht40(conf))
3646                         rt2800_bbp_write(rt2x00dev, 105, 0x04);
3647                 else
3648                         rt2800_bbp_write(rt2x00dev, 105, 0x34);
3649
3650                 rt2800_bbp_write(rt2x00dev, 62, 0x37 - rt2x00dev->lna_gain);
3651                 rt2800_bbp_write(rt2x00dev, 63, 0x37 - rt2x00dev->lna_gain);
3652                 rt2800_bbp_write(rt2x00dev, 64, 0x37 - rt2x00dev->lna_gain);
3653                 rt2800_bbp_write(rt2x00dev, 77, 0x98);
3654         } else {
3655                 rt2800_bbp_write(rt2x00dev, 62, 0x37 - rt2x00dev->lna_gain);
3656                 rt2800_bbp_write(rt2x00dev, 63, 0x37 - rt2x00dev->lna_gain);
3657                 rt2800_bbp_write(rt2x00dev, 64, 0x37 - rt2x00dev->lna_gain);
3658                 rt2800_bbp_write(rt2x00dev, 86, 0);
3659         }
3660
3661         if (rf->channel <= 14) {
3662                 if (!rt2x00_rt(rt2x00dev, RT5390) &&
3663                     !rt2x00_rt(rt2x00dev, RT5392) &&
3664                     !rt2x00_rt(rt2x00dev, RT6352)) {
3665                         if (rt2x00_has_cap_external_lna_bg(rt2x00dev)) {
3666                                 rt2800_bbp_write(rt2x00dev, 82, 0x62);
3667                                 rt2800_bbp_write(rt2x00dev, 75, 0x46);
3668                         } else {
3669                                 if (rt2x00_rt(rt2x00dev, RT3593))
3670                                         rt2800_bbp_write(rt2x00dev, 82, 0x62);
3671                                 else
3672                                         rt2800_bbp_write(rt2x00dev, 82, 0x84);
3673                                 rt2800_bbp_write(rt2x00dev, 75, 0x50);
3674                         }
3675                         if (rt2x00_rt(rt2x00dev, RT3593))
3676                                 rt2800_bbp_write(rt2x00dev, 83, 0x8a);
3677                 }
3678
3679         } else {
3680                 if (rt2x00_rt(rt2x00dev, RT3572))
3681                         rt2800_bbp_write(rt2x00dev, 82, 0x94);
3682                 else if (rt2x00_rt(rt2x00dev, RT3593))
3683                         rt2800_bbp_write(rt2x00dev, 82, 0x82);
3684                 else if (!rt2x00_rt(rt2x00dev, RT6352))
3685                         rt2800_bbp_write(rt2x00dev, 82, 0xf2);
3686
3687                 if (rt2x00_rt(rt2x00dev, RT3593))
3688                         rt2800_bbp_write(rt2x00dev, 83, 0x9a);
3689
3690                 if (rt2x00_has_cap_external_lna_a(rt2x00dev))
3691                         rt2800_bbp_write(rt2x00dev, 75, 0x46);
3692                 else
3693                         rt2800_bbp_write(rt2x00dev, 75, 0x50);
3694         }
3695
3696         reg = rt2800_register_read(rt2x00dev, TX_BAND_CFG);
3697         rt2x00_set_field32(&reg, TX_BAND_CFG_HT40_MINUS, conf_is_ht40_minus(conf));
3698         rt2x00_set_field32(&reg, TX_BAND_CFG_A, rf->channel > 14);
3699         rt2x00_set_field32(&reg, TX_BAND_CFG_BG, rf->channel <= 14);
3700         rt2800_register_write(rt2x00dev, TX_BAND_CFG, reg);
3701
3702         if (rt2x00_rt(rt2x00dev, RT3572))
3703                 rt2800_rfcsr_write(rt2x00dev, 8, 0);
3704
3705         if (rt2x00_rt(rt2x00dev, RT6352))
3706                 tx_pin = rt2800_register_read(rt2x00dev, TX_PIN_CFG);
3707         else
3708                 tx_pin = 0;
3709
3710         switch (rt2x00dev->default_ant.tx_chain_num) {
3711         case 3:
3712                 /* Turn on tertiary PAs */
3713                 rt2x00_set_field32(&tx_pin, TX_PIN_CFG_PA_PE_A2_EN,
3714                                    rf->channel > 14);
3715                 rt2x00_set_field32(&tx_pin, TX_PIN_CFG_PA_PE_G2_EN,
3716                                    rf->channel <= 14);
3717                 /* fall-through */
3718         case 2:
3719                 /* Turn on secondary PAs */
3720                 rt2x00_set_field32(&tx_pin, TX_PIN_CFG_PA_PE_A1_EN,
3721                                    rf->channel > 14);
3722                 rt2x00_set_field32(&tx_pin, TX_PIN_CFG_PA_PE_G1_EN,
3723                                    rf->channel <= 14);
3724                 /* fall-through */
3725         case 1:
3726                 /* Turn on primary PAs */
3727                 rt2x00_set_field32(&tx_pin, TX_PIN_CFG_PA_PE_A0_EN,
3728                                    rf->channel > 14);
3729                 if (rt2x00_has_cap_bt_coexist(rt2x00dev))
3730                         rt2x00_set_field32(&tx_pin, TX_PIN_CFG_PA_PE_G0_EN, 1);
3731                 else
3732                         rt2x00_set_field32(&tx_pin, TX_PIN_CFG_PA_PE_G0_EN,
3733                                            rf->channel <= 14);
3734                 break;
3735         }
3736
3737         switch (rt2x00dev->default_ant.rx_chain_num) {
3738         case 3:
3739                 /* Turn on tertiary LNAs */
3740                 rt2x00_set_field32(&tx_pin, TX_PIN_CFG_LNA_PE_A2_EN, 1);
3741                 rt2x00_set_field32(&tx_pin, TX_PIN_CFG_LNA_PE_G2_EN, 1);
3742                 /* fall-through */
3743         case 2:
3744                 /* Turn on secondary LNAs */
3745                 rt2x00_set_field32(&tx_pin, TX_PIN_CFG_LNA_PE_A1_EN, 1);
3746                 rt2x00_set_field32(&tx_pin, TX_PIN_CFG_LNA_PE_G1_EN, 1);
3747                 /* fall-through */
3748         case 1:
3749                 /* Turn on primary LNAs */
3750                 rt2x00_set_field32(&tx_pin, TX_PIN_CFG_LNA_PE_A0_EN, 1);
3751                 rt2x00_set_field32(&tx_pin, TX_PIN_CFG_LNA_PE_G0_EN, 1);
3752                 break;
3753         }
3754
3755         rt2x00_set_field32(&tx_pin, TX_PIN_CFG_RFTR_EN, 1);
3756         rt2x00_set_field32(&tx_pin, TX_PIN_CFG_TRSW_EN, 1);
3757         rt2x00_set_field32(&tx_pin, TX_PIN_CFG_RFRX_EN, 1); /* mt7620 */
3758
3759         rt2800_register_write(rt2x00dev, TX_PIN_CFG, tx_pin);
3760
3761         if (rt2x00_rt(rt2x00dev, RT3572)) {
3762                 rt2800_rfcsr_write(rt2x00dev, 8, 0x80);
3763
3764                 /* AGC init */
3765                 if (rf->channel <= 14)
3766                         reg = 0x1c + (2 * rt2x00dev->lna_gain);
3767                 else
3768                         reg = 0x22 + ((rt2x00dev->lna_gain * 5) / 3);
3769
3770                 rt2800_bbp_write_with_rx_chain(rt2x00dev, 66, reg);
3771         }
3772
3773         if (rt2x00_rt(rt2x00dev, RT3593)) {
3774                 reg = rt2800_register_read(rt2x00dev, GPIO_CTRL);
3775
3776                 /* Band selection */
3777                 if (rt2x00_is_usb(rt2x00dev) ||
3778                     rt2x00_is_pcie(rt2x00dev)) {
3779                         /* GPIO #8 controls all paths */
3780                         rt2x00_set_field32(&reg, GPIO_CTRL_DIR8, 0);
3781                         if (rf->channel <= 14)
3782                                 rt2x00_set_field32(&reg, GPIO_CTRL_VAL8, 1);
3783                         else
3784                                 rt2x00_set_field32(&reg, GPIO_CTRL_VAL8, 0);
3785                 }
3786
3787                 /* LNA PE control. */
3788                 if (rt2x00_is_usb(rt2x00dev)) {
3789                         /* GPIO #4 controls PE0 and PE1,
3790                          * GPIO #7 controls PE2
3791                          */
3792                         rt2x00_set_field32(&reg, GPIO_CTRL_DIR4, 0);
3793                         rt2x00_set_field32(&reg, GPIO_CTRL_DIR7, 0);
3794
3795                         rt2x00_set_field32(&reg, GPIO_CTRL_VAL4, 1);
3796                         rt2x00_set_field32(&reg, GPIO_CTRL_VAL7, 1);
3797                 } else if (rt2x00_is_pcie(rt2x00dev)) {
3798                         /* GPIO #4 controls PE0, PE1 and PE2 */
3799                         rt2x00_set_field32(&reg, GPIO_CTRL_DIR4, 0);
3800                         rt2x00_set_field32(&reg, GPIO_CTRL_VAL4, 1);
3801                 }
3802
3803                 rt2800_register_write(rt2x00dev, GPIO_CTRL, reg);
3804
3805                 /* AGC init */
3806                 if (rf->channel <= 14)
3807                         reg = 0x1c + 2 * rt2x00dev->lna_gain;
3808                 else
3809                         reg = 0x22 + ((rt2x00dev->lna_gain * 5) / 3);
3810
3811                 rt2800_bbp_write_with_rx_chain(rt2x00dev, 66, reg);
3812
3813                 usleep_range(1000, 1500);
3814         }
3815
3816         if (rt2x00_rt(rt2x00dev, RT5592) || rt2x00_rt(rt2x00dev, RT6352)) {
3817                 reg = 0x10;
3818                 if (!conf_is_ht40(conf)) {
3819                         if (rt2x00_rt(rt2x00dev, RT6352) &&
3820                             rt2x00_has_cap_external_lna_bg(rt2x00dev)) {
3821                                 reg |= 0x5;
3822                         } else {
3823                                 reg |= 0xa;
3824                         }
3825                 }
3826                 rt2800_bbp_write(rt2x00dev, 195, 141);
3827                 rt2800_bbp_write(rt2x00dev, 196, reg);
3828
3829                 /* AGC init */
3830                 if (rt2x00_rt(rt2x00dev, RT6352))
3831                         reg = 0x04;
3832                 else
3833                         reg = rf->channel <= 14 ? 0x1c : 0x24;
3834
3835                 reg += 2 * rt2x00dev->lna_gain;
3836                 rt2800_bbp_write_with_rx_chain(rt2x00dev, 66, reg);
3837
3838                 rt2800_iq_calibrate(rt2x00dev, rf->channel);
3839         }
3840
3841         bbp = rt2800_bbp_read(rt2x00dev, 4);
3842         rt2x00_set_field8(&bbp, BBP4_BANDWIDTH, 2 * conf_is_ht40(conf));
3843         rt2800_bbp_write(rt2x00dev, 4, bbp);
3844
3845         bbp = rt2800_bbp_read(rt2x00dev, 3);
3846         rt2x00_set_field8(&bbp, BBP3_HT40_MINUS, conf_is_ht40_minus(conf));
3847         rt2800_bbp_write(rt2x00dev, 3, bbp);
3848
3849         if (rt2x00_rt_rev(rt2x00dev, RT2860, REV_RT2860C)) {
3850                 if (conf_is_ht40(conf)) {
3851                         rt2800_bbp_write(rt2x00dev, 69, 0x1a);
3852                         rt2800_bbp_write(rt2x00dev, 70, 0x0a);
3853                         rt2800_bbp_write(rt2x00dev, 73, 0x16);
3854                 } else {
3855                         rt2800_bbp_write(rt2x00dev, 69, 0x16);
3856                         rt2800_bbp_write(rt2x00dev, 70, 0x08);
3857                         rt2800_bbp_write(rt2x00dev, 73, 0x11);
3858                 }
3859         }
3860
3861         usleep_range(1000, 1500);
3862
3863         /*
3864          * Clear channel statistic counters
3865          */
3866         reg = rt2800_register_read(rt2x00dev, CH_IDLE_STA);
3867         reg = rt2800_register_read(rt2x00dev, CH_BUSY_STA);
3868         reg = rt2800_register_read(rt2x00dev, CH_BUSY_STA_SEC);
3869
3870         /*
3871          * Clear update flag
3872          */
3873         if (rt2x00_rt(rt2x00dev, RT3352) ||
3874             rt2x00_rt(rt2x00dev, RT5350)) {
3875                 bbp = rt2800_bbp_read(rt2x00dev, 49);
3876                 rt2x00_set_field8(&bbp, BBP49_UPDATE_FLAG, 0);
3877                 rt2800_bbp_write(rt2x00dev, 49, bbp);
3878         }
3879 }
3880
3881 static int rt2800_get_gain_calibration_delta(struct rt2x00_dev *rt2x00dev)
3882 {
3883         u8 tssi_bounds[9];
3884         u8 current_tssi;
3885         u16 eeprom;
3886         u8 step;
3887         int i;
3888
3889         /*
3890          * First check if temperature compensation is supported.
3891          */
3892         eeprom = rt2800_eeprom_read(rt2x00dev, EEPROM_NIC_CONF1);
3893         if (!rt2x00_get_field16(eeprom, EEPROM_NIC_CONF1_EXTERNAL_TX_ALC))
3894                 return 0;
3895
3896         /*
3897          * Read TSSI boundaries for temperature compensation from
3898          * the EEPROM.
3899          *
3900          * Array idx               0    1    2    3    4    5    6    7    8
3901          * Matching Delta value   -4   -3   -2   -1    0   +1   +2   +3   +4
3902          * Example TSSI bounds  0xF0 0xD0 0xB5 0xA0 0x88 0x45 0x25 0x15 0x00
3903          */
3904         if (rt2x00dev->curr_band == NL80211_BAND_2GHZ) {
3905                 eeprom = rt2800_eeprom_read(rt2x00dev, EEPROM_TSSI_BOUND_BG1);
3906                 tssi_bounds[0] = rt2x00_get_field16(eeprom,
3907                                         EEPROM_TSSI_BOUND_BG1_MINUS4);
3908                 tssi_bounds[1] = rt2x00_get_field16(eeprom,
3909                                         EEPROM_TSSI_BOUND_BG1_MINUS3);
3910
3911                 eeprom = rt2800_eeprom_read(rt2x00dev, EEPROM_TSSI_BOUND_BG2);
3912                 tssi_bounds[2] = rt2x00_get_field16(eeprom,
3913                                         EEPROM_TSSI_BOUND_BG2_MINUS2);
3914                 tssi_bounds[3] = rt2x00_get_field16(eeprom,
3915                                         EEPROM_TSSI_BOUND_BG2_MINUS1);
3916
3917                 eeprom = rt2800_eeprom_read(rt2x00dev, EEPROM_TSSI_BOUND_BG3);
3918                 tssi_bounds[4] = rt2x00_get_field16(eeprom,
3919                                         EEPROM_TSSI_BOUND_BG3_REF);
3920                 tssi_bounds[5] = rt2x00_get_field16(eeprom,
3921                                         EEPROM_TSSI_BOUND_BG3_PLUS1);
3922
3923                 eeprom = rt2800_eeprom_read(rt2x00dev, EEPROM_TSSI_BOUND_BG4);
3924                 tssi_bounds[6] = rt2x00_get_field16(eeprom,
3925                                         EEPROM_TSSI_BOUND_BG4_PLUS2);
3926                 tssi_bounds[7] = rt2x00_get_field16(eeprom,
3927                                         EEPROM_TSSI_BOUND_BG4_PLUS3);
3928
3929                 eeprom = rt2800_eeprom_read(rt2x00dev, EEPROM_TSSI_BOUND_BG5);
3930                 tssi_bounds[8] = rt2x00_get_field16(eeprom,
3931                                         EEPROM_TSSI_BOUND_BG5_PLUS4);
3932
3933                 step = rt2x00_get_field16(eeprom,
3934                                           EEPROM_TSSI_BOUND_BG5_AGC_STEP);
3935         } else {
3936                 eeprom = rt2800_eeprom_read(rt2x00dev, EEPROM_TSSI_BOUND_A1);
3937                 tssi_bounds[0] = rt2x00_get_field16(eeprom,
3938                                         EEPROM_TSSI_BOUND_A1_MINUS4);
3939                 tssi_bounds[1] = rt2x00_get_field16(eeprom,
3940                                         EEPROM_TSSI_BOUND_A1_MINUS3);
3941
3942                 eeprom = rt2800_eeprom_read(rt2x00dev, EEPROM_TSSI_BOUND_A2);
3943                 tssi_bounds[2] = rt2x00_get_field16(eeprom,
3944                                         EEPROM_TSSI_BOUND_A2_MINUS2);
3945                 tssi_bounds[3] = rt2x00_get_field16(eeprom,
3946                                         EEPROM_TSSI_BOUND_A2_MINUS1);
3947
3948                 eeprom = rt2800_eeprom_read(rt2x00dev, EEPROM_TSSI_BOUND_A3);
3949                 tssi_bounds[4] = rt2x00_get_field16(eeprom,
3950                                         EEPROM_TSSI_BOUND_A3_REF);
3951                 tssi_bounds[5] = rt2x00_get_field16(eeprom,
3952                                         EEPROM_TSSI_BOUND_A3_PLUS1);
3953
3954                 eeprom = rt2800_eeprom_read(rt2x00dev, EEPROM_TSSI_BOUND_A4);
3955                 tssi_bounds[6] = rt2x00_get_field16(eeprom,
3956                                         EEPROM_TSSI_BOUND_A4_PLUS2);
3957                 tssi_bounds[7] = rt2x00_get_field16(eeprom,
3958                                         EEPROM_TSSI_BOUND_A4_PLUS3);
3959
3960                 eeprom = rt2800_eeprom_read(rt2x00dev, EEPROM_TSSI_BOUND_A5);
3961                 tssi_bounds[8] = rt2x00_get_field16(eeprom,
3962                                         EEPROM_TSSI_BOUND_A5_PLUS4);
3963
3964                 step = rt2x00_get_field16(eeprom,
3965                                           EEPROM_TSSI_BOUND_A5_AGC_STEP);
3966         }
3967
3968         /*
3969          * Check if temperature compensation is supported.
3970          */
3971         if (tssi_bounds[4] == 0xff || step == 0xff)
3972                 return 0;
3973
3974         /*
3975          * Read current TSSI (BBP 49).
3976          */
3977         current_tssi = rt2800_bbp_read(rt2x00dev, 49);
3978
3979         /*
3980          * Compare TSSI value (BBP49) with the compensation boundaries
3981          * from the EEPROM and increase or decrease tx power.
3982          */
3983         for (i = 0; i <= 3; i++) {
3984                 if (current_tssi > tssi_bounds[i])
3985                         break;
3986         }
3987
3988         if (i == 4) {
3989                 for (i = 8; i >= 5; i--) {
3990                         if (current_tssi < tssi_bounds[i])
3991                                 break;
3992                 }
3993         }
3994
3995         return (i - 4) * step;
3996 }
3997
3998 static int rt2800_get_txpower_bw_comp(struct rt2x00_dev *rt2x00dev,
3999                                       enum nl80211_band band)
4000 {
4001         u16 eeprom;
4002         u8 comp_en;
4003         u8 comp_type;
4004         int comp_value = 0;
4005
4006         eeprom = rt2800_eeprom_read(rt2x00dev, EEPROM_TXPOWER_DELTA);
4007
4008         /*
4009          * HT40 compensation not required.
4010          */
4011         if (eeprom == 0xffff ||
4012             !test_bit(CONFIG_CHANNEL_HT40, &rt2x00dev->flags))
4013                 return 0;
4014
4015         if (band == NL80211_BAND_2GHZ) {
4016                 comp_en = rt2x00_get_field16(eeprom,
4017                                  EEPROM_TXPOWER_DELTA_ENABLE_2G);
4018                 if (comp_en) {
4019                         comp_type = rt2x00_get_field16(eeprom,
4020                                            EEPROM_TXPOWER_DELTA_TYPE_2G);
4021                         comp_value = rt2x00_get_field16(eeprom,
4022                                             EEPROM_TXPOWER_DELTA_VALUE_2G);
4023                         if (!comp_type)
4024                                 comp_value = -comp_value;
4025                 }
4026         } else {
4027                 comp_en = rt2x00_get_field16(eeprom,
4028                                  EEPROM_TXPOWER_DELTA_ENABLE_5G);
4029                 if (comp_en) {
4030                         comp_type = rt2x00_get_field16(eeprom,
4031                                            EEPROM_TXPOWER_DELTA_TYPE_5G);
4032                         comp_value = rt2x00_get_field16(eeprom,
4033                                             EEPROM_TXPOWER_DELTA_VALUE_5G);
4034                         if (!comp_type)
4035                                 comp_value = -comp_value;
4036                 }
4037         }
4038
4039         return comp_value;
4040 }
4041
4042 static int rt2800_get_txpower_reg_delta(struct rt2x00_dev *rt2x00dev,
4043                                         int power_level, int max_power)
4044 {
4045         int delta;
4046
4047         if (rt2x00_has_cap_power_limit(rt2x00dev))
4048                 return 0;
4049
4050         /*
4051          * XXX: We don't know the maximum transmit power of our hardware since
4052          * the EEPROM doesn't expose it. We only know that we are calibrated
4053          * to 100% tx power.
4054          *
4055          * Hence, we assume the regulatory limit that cfg80211 calulated for
4056          * the current channel is our maximum and if we are requested to lower
4057          * the value we just reduce our tx power accordingly.
4058          */
4059         delta = power_level - max_power;
4060         return min(delta, 0);
4061 }
4062
4063 static u8 rt2800_compensate_txpower(struct rt2x00_dev *rt2x00dev, int is_rate_b,
4064                                    enum nl80211_band band, int power_level,
4065                                    u8 txpower, int delta)
4066 {
4067         u16 eeprom;
4068         u8 criterion;
4069         u8 eirp_txpower;
4070         u8 eirp_txpower_criterion;
4071         u8 reg_limit;
4072
4073         if (rt2x00_rt(rt2x00dev, RT3593))
4074                 return min_t(u8, txpower, 0xc);
4075
4076         if (rt2x00_has_cap_power_limit(rt2x00dev)) {
4077                 /*
4078                  * Check if eirp txpower exceed txpower_limit.
4079                  * We use OFDM 6M as criterion and its eirp txpower
4080                  * is stored at EEPROM_EIRP_MAX_TX_POWER.
4081                  * .11b data rate need add additional 4dbm
4082                  * when calculating eirp txpower.
4083                  */
4084                 eeprom = rt2800_eeprom_read_from_array(rt2x00dev,
4085                                                        EEPROM_TXPOWER_BYRATE,
4086                                                        1);
4087                 criterion = rt2x00_get_field16(eeprom,
4088                                                EEPROM_TXPOWER_BYRATE_RATE0);
4089
4090                 eeprom = rt2800_eeprom_read(rt2x00dev, EEPROM_EIRP_MAX_TX_POWER);
4091
4092                 if (band == NL80211_BAND_2GHZ)
4093                         eirp_txpower_criterion = rt2x00_get_field16(eeprom,
4094                                                  EEPROM_EIRP_MAX_TX_POWER_2GHZ);
4095                 else
4096                         eirp_txpower_criterion = rt2x00_get_field16(eeprom,
4097                                                  EEPROM_EIRP_MAX_TX_POWER_5GHZ);
4098
4099                 eirp_txpower = eirp_txpower_criterion + (txpower - criterion) +
4100                                (is_rate_b ? 4 : 0) + delta;
4101
4102                 reg_limit = (eirp_txpower > power_level) ?
4103                                         (eirp_txpower - power_level) : 0;
4104         } else
4105                 reg_limit = 0;
4106
4107         txpower = max(0, txpower + delta - reg_limit);
4108         return min_t(u8, txpower, 0xc);
4109 }
4110
4111
4112 enum {
4113         TX_PWR_CFG_0_IDX,
4114         TX_PWR_CFG_1_IDX,
4115         TX_PWR_CFG_2_IDX,
4116         TX_PWR_CFG_3_IDX,
4117         TX_PWR_CFG_4_IDX,
4118         TX_PWR_CFG_5_IDX,
4119         TX_PWR_CFG_6_IDX,
4120         TX_PWR_CFG_7_IDX,
4121         TX_PWR_CFG_8_IDX,
4122         TX_PWR_CFG_9_IDX,
4123         TX_PWR_CFG_0_EXT_IDX,
4124         TX_PWR_CFG_1_EXT_IDX,
4125         TX_PWR_CFG_2_EXT_IDX,
4126         TX_PWR_CFG_3_EXT_IDX,
4127         TX_PWR_CFG_4_EXT_IDX,
4128         TX_PWR_CFG_IDX_COUNT,
4129 };
4130
4131 static void rt2800_config_txpower_rt3593(struct rt2x00_dev *rt2x00dev,
4132                                          struct ieee80211_channel *chan,
4133                                          int power_level)
4134 {
4135         u8 txpower;
4136         u16 eeprom;
4137         u32 regs[TX_PWR_CFG_IDX_COUNT];
4138         unsigned int offset;
4139         enum nl80211_band band = chan->band;
4140         int delta;
4141         int i;
4142
4143         memset(regs, '\0', sizeof(regs));
4144
4145         /* TODO: adapt TX power reduction from the rt28xx code */
4146
4147         /* calculate temperature compensation delta */
4148         delta = rt2800_get_gain_calibration_delta(rt2x00dev);
4149
4150         if (band == NL80211_BAND_5GHZ)
4151                 offset = 16;
4152         else
4153                 offset = 0;
4154
4155         if (test_bit(CONFIG_CHANNEL_HT40, &rt2x00dev->flags))
4156                 offset += 8;
4157
4158         /* read the next four txpower values */
4159         eeprom = rt2800_eeprom_read_from_array(rt2x00dev, EEPROM_TXPOWER_BYRATE,
4160                                                offset);
4161
4162         /* CCK 1MBS,2MBS */
4163         txpower = rt2x00_get_field16(eeprom, EEPROM_TXPOWER_BYRATE_RATE0);
4164         txpower = rt2800_compensate_txpower(rt2x00dev, 1, band, power_level,
4165                                             txpower, delta);
4166         rt2x00_set_field32(&regs[TX_PWR_CFG_0_IDX],
4167                            TX_PWR_CFG_0_CCK1_CH0, txpower);
4168         rt2x00_set_field32(&regs[TX_PWR_CFG_0_IDX],
4169                            TX_PWR_CFG_0_CCK1_CH1, txpower);
4170         rt2x00_set_field32(&regs[TX_PWR_CFG_0_EXT_IDX],
4171                            TX_PWR_CFG_0_EXT_CCK1_CH2, txpower);
4172
4173         /* CCK 5.5MBS,11MBS */
4174         txpower = rt2x00_get_field16(eeprom, EEPROM_TXPOWER_BYRATE_RATE1);
4175         txpower = rt2800_compensate_txpower(rt2x00dev, 1, band, power_level,
4176                                             txpower, delta);
4177         rt2x00_set_field32(&regs[TX_PWR_CFG_0_IDX],
4178                            TX_PWR_CFG_0_CCK5_CH0, txpower);
4179         rt2x00_set_field32(&regs[TX_PWR_CFG_0_IDX],
4180                            TX_PWR_CFG_0_CCK5_CH1, txpower);
4181         rt2x00_set_field32(&regs[TX_PWR_CFG_0_EXT_IDX],
4182                            TX_PWR_CFG_0_EXT_CCK5_CH2, txpower);
4183
4184         /* OFDM 6MBS,9MBS */
4185         txpower = rt2x00_get_field16(eeprom, EEPROM_TXPOWER_BYRATE_RATE2);
4186         txpower = rt2800_compensate_txpower(rt2x00dev, 0, band, power_level,
4187                                             txpower, delta);
4188         rt2x00_set_field32(&regs[TX_PWR_CFG_0_IDX],
4189                            TX_PWR_CFG_0_OFDM6_CH0, txpower);
4190         rt2x00_set_field32(&regs[TX_PWR_CFG_0_IDX],
4191                            TX_PWR_CFG_0_OFDM6_CH1, txpower);
4192         rt2x00_set_field32(&regs[TX_PWR_CFG_0_EXT_IDX],
4193                            TX_PWR_CFG_0_EXT_OFDM6_CH2, txpower);
4194
4195         /* OFDM 12MBS,18MBS */
4196         txpower = rt2x00_get_field16(eeprom, EEPROM_TXPOWER_BYRATE_RATE3);
4197         txpower = rt2800_compensate_txpower(rt2x00dev, 0, band, power_level,
4198                                             txpower, delta);
4199         rt2x00_set_field32(&regs[TX_PWR_CFG_0_IDX],
4200                            TX_PWR_CFG_0_OFDM12_CH0, txpower);
4201         rt2x00_set_field32(&regs[TX_PWR_CFG_0_IDX],
4202                            TX_PWR_CFG_0_OFDM12_CH1, txpower);
4203         rt2x00_set_field32(&regs[TX_PWR_CFG_0_EXT_IDX],
4204                            TX_PWR_CFG_0_EXT_OFDM12_CH2, txpower);
4205
4206         /* read the next four txpower values */
4207         eeprom = rt2800_eeprom_read_from_array(rt2x00dev, EEPROM_TXPOWER_BYRATE,
4208                                                offset + 1);
4209
4210         /* OFDM 24MBS,36MBS */
4211         txpower = rt2x00_get_field16(eeprom, EEPROM_TXPOWER_BYRATE_RATE0);
4212         txpower = rt2800_compensate_txpower(rt2x00dev, 0, band, power_level,
4213                                             txpower, delta);
4214         rt2x00_set_field32(&regs[TX_PWR_CFG_1_IDX],
4215                            TX_PWR_CFG_1_OFDM24_CH0, txpower);
4216         rt2x00_set_field32(&regs[TX_PWR_CFG_1_IDX],
4217                            TX_PWR_CFG_1_OFDM24_CH1, txpower);
4218         rt2x00_set_field32(&regs[TX_PWR_CFG_1_EXT_IDX],
4219                            TX_PWR_CFG_1_EXT_OFDM24_CH2, txpower);
4220
4221         /* OFDM 48MBS */
4222         txpower = rt2x00_get_field16(eeprom, EEPROM_TXPOWER_BYRATE_RATE1);
4223         txpower = rt2800_compensate_txpower(rt2x00dev, 0, band, power_level,
4224                                             txpower, delta);
4225         rt2x00_set_field32(&regs[TX_PWR_CFG_1_IDX],
4226                            TX_PWR_CFG_1_OFDM48_CH0, txpower);
4227         rt2x00_set_field32(&regs[TX_PWR_CFG_1_IDX],
4228                            TX_PWR_CFG_1_OFDM48_CH1, txpower);
4229         rt2x00_set_field32(&regs[TX_PWR_CFG_1_EXT_IDX],
4230                            TX_PWR_CFG_1_EXT_OFDM48_CH2, txpower);
4231
4232         /* OFDM 54MBS */
4233         txpower = rt2x00_get_field16(eeprom, EEPROM_TXPOWER_BYRATE_RATE2);
4234         txpower = rt2800_compensate_txpower(rt2x00dev, 0, band, power_level,
4235                                             txpower, delta);
4236         rt2x00_set_field32(&regs[TX_PWR_CFG_7_IDX],
4237                            TX_PWR_CFG_7_OFDM54_CH0, txpower);
4238         rt2x00_set_field32(&regs[TX_PWR_CFG_7_IDX],
4239                            TX_PWR_CFG_7_OFDM54_CH1, txpower);
4240         rt2x00_set_field32(&regs[TX_PWR_CFG_7_IDX],
4241                            TX_PWR_CFG_7_OFDM54_CH2, txpower);
4242
4243         /* read the next four txpower values */
4244         eeprom = rt2800_eeprom_read_from_array(rt2x00dev, EEPROM_TXPOWER_BYRATE,
4245                                                offset + 2);
4246
4247         /* MCS 0,1 */
4248         txpower = rt2x00_get_field16(eeprom, EEPROM_TXPOWER_BYRATE_RATE0);
4249         txpower = rt2800_compensate_txpower(rt2x00dev, 0, band, power_level,
4250                                             txpower, delta);
4251         rt2x00_set_field32(&regs[TX_PWR_CFG_1_IDX],
4252                            TX_PWR_CFG_1_MCS0_CH0, txpower);
4253         rt2x00_set_field32(&regs[TX_PWR_CFG_1_IDX],
4254                            TX_PWR_CFG_1_MCS0_CH1, txpower);
4255         rt2x00_set_field32(&regs[TX_PWR_CFG_1_EXT_IDX],
4256                            TX_PWR_CFG_1_EXT_MCS0_CH2, txpower);
4257
4258         /* MCS 2,3 */
4259         txpower = rt2x00_get_field16(eeprom, EEPROM_TXPOWER_BYRATE_RATE1);
4260         txpower = rt2800_compensate_txpower(rt2x00dev, 0, band, power_level,
4261                                             txpower, delta);
4262         rt2x00_set_field32(&regs[TX_PWR_CFG_1_IDX],
4263                            TX_PWR_CFG_1_MCS2_CH0, txpower);
4264         rt2x00_set_field32(&regs[TX_PWR_CFG_1_IDX],
4265                            TX_PWR_CFG_1_MCS2_CH1, txpower);
4266         rt2x00_set_field32(&regs[TX_PWR_CFG_1_EXT_IDX],
4267                            TX_PWR_CFG_1_EXT_MCS2_CH2, txpower);
4268
4269         /* MCS 4,5 */
4270         txpower = rt2x00_get_field16(eeprom, EEPROM_TXPOWER_BYRATE_RATE2);
4271         txpower = rt2800_compensate_txpower(rt2x00dev, 0, band, power_level,
4272                                             txpower, delta);
4273         rt2x00_set_field32(&regs[TX_PWR_CFG_2_IDX],
4274                            TX_PWR_CFG_2_MCS4_CH0, txpower);
4275         rt2x00_set_field32(&regs[TX_PWR_CFG_2_IDX],
4276                            TX_PWR_CFG_2_MCS4_CH1, txpower);
4277         rt2x00_set_field32(&regs[TX_PWR_CFG_2_EXT_IDX],
4278                            TX_PWR_CFG_2_EXT_MCS4_CH2, txpower);
4279
4280         /* MCS 6 */
4281         txpower = rt2x00_get_field16(eeprom, EEPROM_TXPOWER_BYRATE_RATE3);
4282         txpower = rt2800_compensate_txpower(rt2x00dev, 0, band, power_level,
4283                                             txpower, delta);
4284         rt2x00_set_field32(&regs[TX_PWR_CFG_2_IDX],
4285                            TX_PWR_CFG_2_MCS6_CH0, txpower);
4286         rt2x00_set_field32(&regs[TX_PWR_CFG_2_IDX],
4287                            TX_PWR_CFG_2_MCS6_CH1, txpower);
4288         rt2x00_set_field32(&regs[TX_PWR_CFG_2_EXT_IDX],
4289                            TX_PWR_CFG_2_EXT_MCS6_CH2, txpower);
4290
4291         /* read the next four txpower values */
4292         eeprom = rt2800_eeprom_read_from_array(rt2x00dev, EEPROM_TXPOWER_BYRATE,
4293                                                offset + 3);
4294
4295         /* MCS 7 */
4296         txpower = rt2x00_get_field16(eeprom, EEPROM_TXPOWER_BYRATE_RATE0);
4297         txpower = rt2800_compensate_txpower(rt2x00dev, 0, band, power_level,
4298                                             txpower, delta);
4299         rt2x00_set_field32(&regs[TX_PWR_CFG_7_IDX],
4300                            TX_PWR_CFG_7_MCS7_CH0, txpower);
4301         rt2x00_set_field32(&regs[TX_PWR_CFG_7_IDX],
4302                            TX_PWR_CFG_7_MCS7_CH1, txpower);
4303         rt2x00_set_field32(&regs[TX_PWR_CFG_7_IDX],
4304                            TX_PWR_CFG_7_MCS7_CH2, txpower);
4305
4306         /* MCS 8,9 */
4307         txpower = rt2x00_get_field16(eeprom, EEPROM_TXPOWER_BYRATE_RATE1);
4308         txpower = rt2800_compensate_txpower(rt2x00dev, 0, band, power_level,
4309                                             txpower, delta);
4310         rt2x00_set_field32(&regs[TX_PWR_CFG_2_IDX],
4311                            TX_PWR_CFG_2_MCS8_CH0, txpower);
4312         rt2x00_set_field32(&regs[TX_PWR_CFG_2_IDX],
4313                            TX_PWR_CFG_2_MCS8_CH1, txpower);
4314         rt2x00_set_field32(&regs[TX_PWR_CFG_2_EXT_IDX],
4315                            TX_PWR_CFG_2_EXT_MCS8_CH2, txpower);
4316
4317         /* MCS 10,11 */
4318         txpower = rt2x00_get_field16(eeprom, EEPROM_TXPOWER_BYRATE_RATE2);
4319         txpower = rt2800_compensate_txpower(rt2x00dev, 0, band, power_level,
4320                                             txpower, delta);
4321         rt2x00_set_field32(&regs[TX_PWR_CFG_2_IDX],
4322                            TX_PWR_CFG_2_MCS10_CH0, txpower);
4323         rt2x00_set_field32(&regs[TX_PWR_CFG_2_IDX],
4324                            TX_PWR_CFG_2_MCS10_CH1, txpower);
4325         rt2x00_set_field32(&regs[TX_PWR_CFG_2_EXT_IDX],
4326                            TX_PWR_CFG_2_EXT_MCS10_CH2, txpower);
4327
4328         /* MCS 12,13 */
4329         txpower = rt2x00_get_field16(eeprom, EEPROM_TXPOWER_BYRATE_RATE3);
4330         txpower = rt2800_compensate_txpower(rt2x00dev, 0, band, power_level,
4331                                             txpower, delta);
4332         rt2x00_set_field32(&regs[TX_PWR_CFG_3_IDX],
4333                            TX_PWR_CFG_3_MCS12_CH0, txpower);
4334         rt2x00_set_field32(&regs[TX_PWR_CFG_3_IDX],
4335                            TX_PWR_CFG_3_MCS12_CH1, txpower);
4336         rt2x00_set_field32(&regs[TX_PWR_CFG_3_EXT_IDX],
4337                            TX_PWR_CFG_3_EXT_MCS12_CH2, txpower);
4338
4339         /* read the next four txpower values */
4340         eeprom = rt2800_eeprom_read_from_array(rt2x00dev, EEPROM_TXPOWER_BYRATE,
4341                                                offset + 4);
4342
4343         /* MCS 14 */
4344         txpower = rt2x00_get_field16(eeprom, EEPROM_TXPOWER_BYRATE_RATE0);
4345         txpower = rt2800_compensate_txpower(rt2x00dev, 0, band, power_level,
4346                                             txpower, delta);
4347         rt2x00_set_field32(&regs[TX_PWR_CFG_3_IDX],
4348                            TX_PWR_CFG_3_MCS14_CH0, txpower);
4349         rt2x00_set_field32(&regs[TX_PWR_CFG_3_IDX],
4350                            TX_PWR_CFG_3_MCS14_CH1, txpower);
4351         rt2x00_set_field32(&regs[TX_PWR_CFG_3_EXT_IDX],
4352                            TX_PWR_CFG_3_EXT_MCS14_CH2, txpower);
4353
4354         /* MCS 15 */
4355         txpower = rt2x00_get_field16(eeprom, EEPROM_TXPOWER_BYRATE_RATE1);
4356         txpower = rt2800_compensate_txpower(rt2x00dev, 0, band, power_level,
4357                                             txpower, delta);
4358         rt2x00_set_field32(&regs[TX_PWR_CFG_8_IDX],
4359                            TX_PWR_CFG_8_MCS15_CH0, txpower);
4360         rt2x00_set_field32(&regs[TX_PWR_CFG_8_IDX],
4361                            TX_PWR_CFG_8_MCS15_CH1, txpower);
4362         rt2x00_set_field32(&regs[TX_PWR_CFG_8_IDX],
4363                            TX_PWR_CFG_8_MCS15_CH2, txpower);
4364
4365         /* MCS 16,17 */
4366         txpower = rt2x00_get_field16(eeprom, EEPROM_TXPOWER_BYRATE_RATE2);
4367         txpower = rt2800_compensate_txpower(rt2x00dev, 0, band, power_level,
4368                                             txpower, delta);
4369         rt2x00_set_field32(&regs[TX_PWR_CFG_5_IDX],
4370                            TX_PWR_CFG_5_MCS16_CH0, txpower);
4371         rt2x00_set_field32(&regs[TX_PWR_CFG_5_IDX],
4372                            TX_PWR_CFG_5_MCS16_CH1, txpower);
4373         rt2x00_set_field32(&regs[TX_PWR_CFG_5_IDX],
4374                            TX_PWR_CFG_5_MCS16_CH2, txpower);
4375
4376         /* MCS 18,19 */
4377         txpower = rt2x00_get_field16(eeprom, EEPROM_TXPOWER_BYRATE_RATE3);
4378         txpower = rt2800_compensate_txpower(rt2x00dev, 0, band, power_level,
4379                                             txpower, delta);
4380         rt2x00_set_field32(&regs[TX_PWR_CFG_5_IDX],
4381                            TX_PWR_CFG_5_MCS18_CH0, txpower);
4382         rt2x00_set_field32(&regs[TX_PWR_CFG_5_IDX],
4383                            TX_PWR_CFG_5_MCS18_CH1, txpower);
4384         rt2x00_set_field32(&regs[TX_PWR_CFG_5_IDX],
4385                            TX_PWR_CFG_5_MCS18_CH2, txpower);
4386
4387         /* read the next four txpower values */
4388         eeprom = rt2800_eeprom_read_from_array(rt2x00dev, EEPROM_TXPOWER_BYRATE,
4389                                                offset + 5);
4390
4391         /* MCS 20,21 */
4392         txpower = rt2x00_get_field16(eeprom, EEPROM_TXPOWER_BYRATE_RATE0);
4393         txpower = rt2800_compensate_txpower(rt2x00dev, 0, band, power_level,
4394                                             txpower, delta);
4395         rt2x00_set_field32(&regs[TX_PWR_CFG_6_IDX],
4396                            TX_PWR_CFG_6_MCS20_CH0, txpower);
4397         rt2x00_set_field32(&regs[TX_PWR_CFG_6_IDX],
4398                            TX_PWR_CFG_6_MCS20_CH1, txpower);
4399         rt2x00_set_field32(&regs[TX_PWR_CFG_6_IDX],
4400                            TX_PWR_CFG_6_MCS20_CH2, txpower);
4401
4402         /* MCS 22 */
4403         txpower = rt2x00_get_field16(eeprom, EEPROM_TXPOWER_BYRATE_RATE1);
4404         txpower = rt2800_compensate_txpower(rt2x00dev, 0, band, power_level,
4405                                             txpower, delta);
4406         rt2x00_set_field32(&regs[TX_PWR_CFG_6_IDX],
4407                            TX_PWR_CFG_6_MCS22_CH0, txpower);
4408         rt2x00_set_field32(&regs[TX_PWR_CFG_6_IDX],
4409                            TX_PWR_CFG_6_MCS22_CH1, txpower);
4410         rt2x00_set_field32(&regs[TX_PWR_CFG_6_IDX],
4411                            TX_PWR_CFG_6_MCS22_CH2, txpower);
4412
4413         /* MCS 23 */
4414         txpower = rt2x00_get_field16(eeprom, EEPROM_TXPOWER_BYRATE_RATE2);
4415         txpower = rt2800_compensate_txpower(rt2x00dev, 0, band, power_level,
4416                                             txpower, delta);
4417         rt2x00_set_field32(&regs[TX_PWR_CFG_8_IDX],
4418                            TX_PWR_CFG_8_MCS23_CH0, txpower);
4419         rt2x00_set_field32(&regs[TX_PWR_CFG_8_IDX],
4420                            TX_PWR_CFG_8_MCS23_CH1, txpower);
4421         rt2x00_set_field32(&regs[TX_PWR_CFG_8_IDX],
4422                            TX_PWR_CFG_8_MCS23_CH2, txpower);
4423
4424         /* read the next four txpower values */
4425         eeprom = rt2800_eeprom_read_from_array(rt2x00dev, EEPROM_TXPOWER_BYRATE,
4426                                                offset + 6);
4427
4428         /* STBC, MCS 0,1 */
4429         txpower = rt2x00_get_field16(eeprom, EEPROM_TXPOWER_BYRATE_RATE0);
4430         txpower = rt2800_compensate_txpower(rt2x00dev, 0, band, power_level,
4431                                             txpower, delta);
4432         rt2x00_set_field32(&regs[TX_PWR_CFG_3_IDX],
4433                            TX_PWR_CFG_3_STBC0_CH0, txpower);
4434         rt2x00_set_field32(&regs[TX_PWR_CFG_3_IDX],
4435                            TX_PWR_CFG_3_STBC0_CH1, txpower);
4436         rt2x00_set_field32(&regs[TX_PWR_CFG_3_EXT_IDX],
4437                            TX_PWR_CFG_3_EXT_STBC0_CH2, txpower);
4438
4439         /* STBC, MCS 2,3 */
4440         txpower = rt2x00_get_field16(eeprom, EEPROM_TXPOWER_BYRATE_RATE1);
4441         txpower = rt2800_compensate_txpower(rt2x00dev, 0, band, power_level,
4442                                             txpower, delta);
4443         rt2x00_set_field32(&regs[TX_PWR_CFG_3_IDX],
4444                            TX_PWR_CFG_3_STBC2_CH0, txpower);
4445         rt2x00_set_field32(&regs[TX_PWR_CFG_3_IDX],
4446                            TX_PWR_CFG_3_STBC2_CH1, txpower);
4447         rt2x00_set_field32(&regs[TX_PWR_CFG_3_EXT_IDX],
4448                            TX_PWR_CFG_3_EXT_STBC2_CH2, txpower);
4449
4450         /* STBC, MCS 4,5 */
4451         txpower = rt2x00_get_field16(eeprom, EEPROM_TXPOWER_BYRATE_RATE2);
4452         txpower = rt2800_compensate_txpower(rt2x00dev, 0, band, power_level,
4453                                             txpower, delta);
4454         rt2x00_set_field32(&regs[TX_PWR_CFG_4_IDX], TX_PWR_CFG_RATE0, txpower);
4455         rt2x00_set_field32(&regs[TX_PWR_CFG_4_IDX], TX_PWR_CFG_RATE1, txpower);
4456         rt2x00_set_field32(&regs[TX_PWR_CFG_4_EXT_IDX], TX_PWR_CFG_RATE0,
4457                            txpower);
4458
4459         /* STBC, MCS 6 */
4460         txpower = rt2x00_get_field16(eeprom, EEPROM_TXPOWER_BYRATE_RATE3);
4461         txpower = rt2800_compensate_txpower(rt2x00dev, 0, band, power_level,
4462                                             txpower, delta);
4463         rt2x00_set_field32(&regs[TX_PWR_CFG_4_IDX], TX_PWR_CFG_RATE2, txpower);
4464         rt2x00_set_field32(&regs[TX_PWR_CFG_4_IDX], TX_PWR_CFG_RATE3, txpower);
4465         rt2x00_set_field32(&regs[TX_PWR_CFG_4_EXT_IDX], TX_PWR_CFG_RATE2,
4466                            txpower);
4467
4468         /* read the next four txpower values */
4469         eeprom = rt2800_eeprom_read_from_array(rt2x00dev, EEPROM_TXPOWER_BYRATE,
4470                                                offset + 7);
4471
4472         /* STBC, MCS 7 */
4473         txpower = rt2x00_get_field16(eeprom, EEPROM_TXPOWER_BYRATE_RATE0);
4474         txpower = rt2800_compensate_txpower(rt2x00dev, 0, band, power_level,
4475                                             txpower, delta);
4476         rt2x00_set_field32(&regs[TX_PWR_CFG_9_IDX],
4477                            TX_PWR_CFG_9_STBC7_CH0, txpower);
4478         rt2x00_set_field32(&regs[TX_PWR_CFG_9_IDX],
4479                            TX_PWR_CFG_9_STBC7_CH1, txpower);
4480         rt2x00_set_field32(&regs[TX_PWR_CFG_9_IDX],
4481                            TX_PWR_CFG_9_STBC7_CH2, txpower);
4482
4483         rt2800_register_write(rt2x00dev, TX_PWR_CFG_0, regs[TX_PWR_CFG_0_IDX]);
4484         rt2800_register_write(rt2x00dev, TX_PWR_CFG_1, regs[TX_PWR_CFG_1_IDX]);
4485         rt2800_register_write(rt2x00dev, TX_PWR_CFG_2, regs[TX_PWR_CFG_2_IDX]);
4486         rt2800_register_write(rt2x00dev, TX_PWR_CFG_3, regs[TX_PWR_CFG_3_IDX]);
4487         rt2800_register_write(rt2x00dev, TX_PWR_CFG_4, regs[TX_PWR_CFG_4_IDX]);
4488         rt2800_register_write(rt2x00dev, TX_PWR_CFG_5, regs[TX_PWR_CFG_5_IDX]);
4489         rt2800_register_write(rt2x00dev, TX_PWR_CFG_6, regs[TX_PWR_CFG_6_IDX]);
4490         rt2800_register_write(rt2x00dev, TX_PWR_CFG_7, regs[TX_PWR_CFG_7_IDX]);
4491         rt2800_register_write(rt2x00dev, TX_PWR_CFG_8, regs[TX_PWR_CFG_8_IDX]);
4492         rt2800_register_write(rt2x00dev, TX_PWR_CFG_9, regs[TX_PWR_CFG_9_IDX]);
4493
4494         rt2800_register_write(rt2x00dev, TX_PWR_CFG_0_EXT,
4495                               regs[TX_PWR_CFG_0_EXT_IDX]);
4496         rt2800_register_write(rt2x00dev, TX_PWR_CFG_1_EXT,
4497                               regs[TX_PWR_CFG_1_EXT_IDX]);
4498         rt2800_register_write(rt2x00dev, TX_PWR_CFG_2_EXT,
4499                               regs[TX_PWR_CFG_2_EXT_IDX]);
4500         rt2800_register_write(rt2x00dev, TX_PWR_CFG_3_EXT,
4501                               regs[TX_PWR_CFG_3_EXT_IDX]);
4502         rt2800_register_write(rt2x00dev, TX_PWR_CFG_4_EXT,
4503                               regs[TX_PWR_CFG_4_EXT_IDX]);
4504
4505         for (i = 0; i < TX_PWR_CFG_IDX_COUNT; i++)
4506                 rt2x00_dbg(rt2x00dev,
4507                            "band:%cGHz, BW:%c0MHz, TX_PWR_CFG_%d%s = %08lx\n",
4508                            (band == NL80211_BAND_5GHZ) ? '5' : '2',
4509                            (test_bit(CONFIG_CHANNEL_HT40, &rt2x00dev->flags)) ?
4510                                                                 '4' : '2',
4511                            (i > TX_PWR_CFG_9_IDX) ?
4512                                         (i - TX_PWR_CFG_9_IDX - 1) : i,
4513                            (i > TX_PWR_CFG_9_IDX) ? "_EXT" : "",
4514                            (unsigned long) regs[i]);
4515 }
4516
4517 static void rt2800_config_txpower_rt6352(struct rt2x00_dev *rt2x00dev,
4518                                          struct ieee80211_channel *chan,
4519                                          int power_level)
4520 {
4521         u32 reg, pwreg;
4522         u16 eeprom;
4523         u32 data, gdata;
4524         u8 t, i;
4525         enum nl80211_band band = chan->band;
4526         int delta;
4527
4528         /* Warn user if bw_comp is set in EEPROM */
4529         delta = rt2800_get_txpower_bw_comp(rt2x00dev, band);
4530
4531         if (delta)
4532                 rt2x00_warn(rt2x00dev, "ignoring EEPROM HT40 power delta: %d\n",
4533                             delta);
4534
4535         /* populate TX_PWR_CFG_0 up to TX_PWR_CFG_4 from EEPROM for HT20, limit
4536          * value to 0x3f and replace 0x20 by 0x21 as this is what the vendor
4537          * driver does as well, though it looks kinda wrong.
4538          * Maybe some misunderstanding of what a signed 8-bit value is? Maybe
4539          * the hardware has a problem handling 0x20, and as the code initially
4540          * used a fixed offset between HT20 and HT40 rates they had to work-
4541          * around that issue and most likely just forgot about it later on.
4542          * Maybe we should use rt2800_get_txpower_bw_comp() here as well,
4543          * however, the corresponding EEPROM value is not respected by the
4544          * vendor driver, so maybe this is rather being taken care of the
4545          * TXALC and the driver doesn't need to handle it...?
4546          * Though this is all very awkward, just do as they did, as that's what
4547          * board vendors expected when they populated the EEPROM...
4548          */
4549         for (i = 0; i < 5; i++) {
4550                 eeprom = rt2800_eeprom_read_from_array(rt2x00dev,
4551                                                        EEPROM_TXPOWER_BYRATE,
4552                                                        i * 2);
4553
4554                 data = eeprom;
4555
4556                 t = eeprom & 0x3f;
4557                 if (t == 32)
4558                         t++;
4559
4560                 gdata = t;
4561
4562                 t = (eeprom & 0x3f00) >> 8;
4563                 if (t == 32)
4564                         t++;
4565
4566                 gdata |= (t << 8);
4567
4568                 eeprom = rt2800_eeprom_read_from_array(rt2x00dev,
4569                                                        EEPROM_TXPOWER_BYRATE,
4570                                                        (i * 2) + 1);
4571
4572                 t = eeprom & 0x3f;
4573                 if (t == 32)
4574                         t++;
4575
4576                 gdata |= (t << 16);
4577
4578                 t = (eeprom & 0x3f00) >> 8;
4579                 if (t == 32)
4580                         t++;
4581
4582                 gdata |= (t << 24);
4583                 data |= (eeprom << 16);
4584
4585                 if (!test_bit(CONFIG_CHANNEL_HT40, &rt2x00dev->flags)) {
4586                         /* HT20 */
4587                         if (data != 0xffffffff)
4588                                 rt2800_register_write(rt2x00dev,
4589                                                       TX_PWR_CFG_0 + (i * 4),
4590                                                       data);
4591                 } else {
4592                         /* HT40 */
4593                         if (gdata != 0xffffffff)
4594                                 rt2800_register_write(rt2x00dev,
4595                                                       TX_PWR_CFG_0 + (i * 4),
4596                                                       gdata);
4597                 }
4598         }
4599
4600         /* Aparently Ralink ran out of space in the BYRATE calibration section
4601          * of the EERPOM which is copied to the corresponding TX_PWR_CFG_x
4602          * registers. As recent 2T chips use 8-bit instead of 4-bit values for
4603          * power-offsets more space would be needed. Ralink decided to keep the
4604          * EEPROM layout untouched and rather have some shared values covering
4605          * multiple bitrates.
4606          * Populate the registers not covered by the EEPROM in the same way the
4607          * vendor driver does.
4608          */
4609
4610         /* For OFDM 54MBS use value from OFDM 48MBS */
4611         pwreg = 0;
4612         reg = rt2800_register_read(rt2x00dev, TX_PWR_CFG_1);
4613         t = rt2x00_get_field32(reg, TX_PWR_CFG_1B_48MBS);
4614         rt2x00_set_field32(&pwreg, TX_PWR_CFG_7B_54MBS, t);
4615
4616         /* For MCS 7 use value from MCS 6 */
4617         reg = rt2800_register_read(rt2x00dev, TX_PWR_CFG_2);
4618         t = rt2x00_get_field32(reg, TX_PWR_CFG_2B_MCS6_MCS7);
4619         rt2x00_set_field32(&pwreg, TX_PWR_CFG_7B_MCS7, t);
4620         rt2800_register_write(rt2x00dev, TX_PWR_CFG_7, pwreg);
4621
4622         /* For MCS 15 use value from MCS 14 */
4623         pwreg = 0;
4624         reg = rt2800_register_read(rt2x00dev, TX_PWR_CFG_3);
4625         t = rt2x00_get_field32(reg, TX_PWR_CFG_3B_MCS14);
4626         rt2x00_set_field32(&pwreg, TX_PWR_CFG_8B_MCS15, t);
4627         rt2800_register_write(rt2x00dev, TX_PWR_CFG_8, pwreg);
4628
4629         /* For STBC MCS 7 use value from STBC MCS 6 */
4630         pwreg = 0;
4631         reg = rt2800_register_read(rt2x00dev, TX_PWR_CFG_4);
4632         t = rt2x00_get_field32(reg, TX_PWR_CFG_4B_STBC_MCS6);
4633         rt2x00_set_field32(&pwreg, TX_PWR_CFG_9B_STBC_MCS7, t);
4634         rt2800_register_write(rt2x00dev, TX_PWR_CFG_9, pwreg);
4635
4636         rt2800_config_alc(rt2x00dev, chan, power_level);
4637
4638         /* TODO: temperature compensation code! */
4639 }
4640
4641 /*
4642  * We configure transmit power using MAC TX_PWR_CFG_{0,...,N} registers and
4643  * BBP R1 register. TX_PWR_CFG_X allow to configure per rate TX power values,
4644  * 4 bits for each rate (tune from 0 to 15 dBm). BBP_R1 controls transmit power
4645  * for all rates, but allow to set only 4 discrete values: -12, -6, 0 and 6 dBm.
4646  * Reference per rate transmit power values are located in the EEPROM at
4647  * EEPROM_TXPOWER_BYRATE offset. We adjust them and BBP R1 settings according to
4648  * current conditions (i.e. band, bandwidth, temperature, user settings).
4649  */
4650 static void rt2800_config_txpower_rt28xx(struct rt2x00_dev *rt2x00dev,
4651                                          struct ieee80211_channel *chan,
4652                                          int power_level)
4653 {
4654         u8 txpower, r1;
4655         u16 eeprom;
4656         u32 reg, offset;
4657         int i, is_rate_b, delta, power_ctrl;
4658         enum nl80211_band band = chan->band;
4659
4660         /*
4661          * Calculate HT40 compensation. For 40MHz we need to add or subtract
4662          * value read from EEPROM (different for 2GHz and for 5GHz).
4663          */
4664         delta = rt2800_get_txpower_bw_comp(rt2x00dev, band);
4665
4666         /*
4667          * Calculate temperature compensation. Depends on measurement of current
4668          * TSSI (Transmitter Signal Strength Indication) we know TX power (due
4669          * to temperature or maybe other factors) is smaller or bigger than
4670          * expected. We adjust it, based on TSSI reference and boundaries values
4671          * provided in EEPROM.
4672          */
4673         switch (rt2x00dev->chip.rt) {
4674         case RT2860:
4675         case RT2872:
4676         case RT2883:
4677         case RT3070:
4678         case RT3071:
4679         case RT3090:
4680         case RT3572:
4681                 delta += rt2800_get_gain_calibration_delta(rt2x00dev);
4682                 break;
4683         default:
4684                 /* TODO: temperature compensation code for other chips. */
4685                 break;
4686         }
4687
4688         /*
4689          * Decrease power according to user settings, on devices with unknown
4690          * maximum tx power. For other devices we take user power_level into
4691          * consideration on rt2800_compensate_txpower().
4692          */
4693         delta += rt2800_get_txpower_reg_delta(rt2x00dev, power_level,
4694                                               chan->max_power);
4695
4696         /*
4697          * BBP_R1 controls TX power for all rates, it allow to set the following
4698          * gains -12, -6, 0, +6 dBm by setting values 2, 1, 0, 3 respectively.
4699          *
4700          * TODO: we do not use +6 dBm option to do not increase power beyond
4701          * regulatory limit, however this could be utilized for devices with
4702          * CAPABILITY_POWER_LIMIT.
4703          */
4704         if (delta <= -12) {
4705                 power_ctrl = 2;
4706                 delta += 12;
4707         } else if (delta <= -6) {
4708                 power_ctrl = 1;
4709                 delta += 6;
4710         } else {
4711                 power_ctrl = 0;
4712         }
4713         r1 = rt2800_bbp_read(rt2x00dev, 1);
4714         rt2x00_set_field8(&r1, BBP1_TX_POWER_CTRL, power_ctrl);
4715         rt2800_bbp_write(rt2x00dev, 1, r1);
4716
4717         offset = TX_PWR_CFG_0;
4718
4719         for (i = 0; i < EEPROM_TXPOWER_BYRATE_SIZE; i += 2) {
4720                 /* just to be safe */
4721                 if (offset > TX_PWR_CFG_4)
4722                         break;
4723
4724                 reg = rt2800_register_read(rt2x00dev, offset);
4725
4726                 /* read the next four txpower values */
4727                 eeprom = rt2800_eeprom_read_from_array(rt2x00dev,
4728                                                        EEPROM_TXPOWER_BYRATE,
4729                                                        i);
4730
4731                 is_rate_b = i ? 0 : 1;
4732                 /*
4733                  * TX_PWR_CFG_0: 1MBS, TX_PWR_CFG_1: 24MBS,
4734                  * TX_PWR_CFG_2: MCS4, TX_PWR_CFG_3: MCS12,
4735                  * TX_PWR_CFG_4: unknown
4736                  */
4737                 txpower = rt2x00_get_field16(eeprom,
4738                                              EEPROM_TXPOWER_BYRATE_RATE0);
4739                 txpower = rt2800_compensate_txpower(rt2x00dev, is_rate_b, band,
4740                                              power_level, txpower, delta);
4741                 rt2x00_set_field32(&reg, TX_PWR_CFG_RATE0, txpower);
4742
4743                 /*
4744                  * TX_PWR_CFG_0: 2MBS, TX_PWR_CFG_1: 36MBS,
4745                  * TX_PWR_CFG_2: MCS5, TX_PWR_CFG_3: MCS13,
4746                  * TX_PWR_CFG_4: unknown
4747                  */
4748                 txpower = rt2x00_get_field16(eeprom,
4749                                              EEPROM_TXPOWER_BYRATE_RATE1);
4750                 txpower = rt2800_compensate_txpower(rt2x00dev, is_rate_b, band,
4751                                              power_level, txpower, delta);
4752                 rt2x00_set_field32(&reg, TX_PWR_CFG_RATE1, txpower);
4753
4754                 /*
4755                  * TX_PWR_CFG_0: 5.5MBS, TX_PWR_CFG_1: 48MBS,
4756                  * TX_PWR_CFG_2: MCS6,  TX_PWR_CFG_3: MCS14,
4757                  * TX_PWR_CFG_4: unknown
4758                  */
4759                 txpower = rt2x00_get_field16(eeprom,
4760                                              EEPROM_TXPOWER_BYRATE_RATE2);
4761                 txpower = rt2800_compensate_txpower(rt2x00dev, is_rate_b, band,
4762                                              power_level, txpower, delta);
4763                 rt2x00_set_field32(&reg, TX_PWR_CFG_RATE2, txpower);
4764
4765                 /*
4766                  * TX_PWR_CFG_0: 11MBS, TX_PWR_CFG_1: 54MBS,
4767                  * TX_PWR_CFG_2: MCS7,  TX_PWR_CFG_3: MCS15,
4768                  * TX_PWR_CFG_4: unknown
4769                  */
4770                 txpower = rt2x00_get_field16(eeprom,
4771                                              EEPROM_TXPOWER_BYRATE_RATE3);
4772                 txpower = rt2800_compensate_txpower(rt2x00dev, is_rate_b, band,
4773                                              power_level, txpower, delta);
4774                 rt2x00_set_field32(&reg, TX_PWR_CFG_RATE3, txpower);
4775
4776                 /* read the next four txpower values */
4777                 eeprom = rt2800_eeprom_read_from_array(rt2x00dev,
4778                                                        EEPROM_TXPOWER_BYRATE,
4779                                                        i + 1);
4780
4781                 is_rate_b = 0;
4782                 /*
4783                  * TX_PWR_CFG_0: 6MBS, TX_PWR_CFG_1: MCS0,
4784                  * TX_PWR_CFG_2: MCS8, TX_PWR_CFG_3: unknown,
4785                  * TX_PWR_CFG_4: unknown
4786                  */
4787                 txpower = rt2x00_get_field16(eeprom,
4788                                              EEPROM_TXPOWER_BYRATE_RATE0);
4789                 txpower = rt2800_compensate_txpower(rt2x00dev, is_rate_b, band,
4790                                              power_level, txpower, delta);
4791                 rt2x00_set_field32(&reg, TX_PWR_CFG_RATE4, txpower);
4792
4793                 /*
4794                  * TX_PWR_CFG_0: 9MBS, TX_PWR_CFG_1: MCS1,
4795                  * TX_PWR_CFG_2: MCS9, TX_PWR_CFG_3: unknown,
4796                  * TX_PWR_CFG_4: unknown
4797                  */
4798                 txpower = rt2x00_get_field16(eeprom,
4799                                              EEPROM_TXPOWER_BYRATE_RATE1);
4800                 txpower = rt2800_compensate_txpower(rt2x00dev, is_rate_b, band,
4801                                              power_level, txpower, delta);
4802                 rt2x00_set_field32(&reg, TX_PWR_CFG_RATE5, txpower);
4803
4804                 /*
4805                  * TX_PWR_CFG_0: 12MBS, TX_PWR_CFG_1: MCS2,
4806                  * TX_PWR_CFG_2: MCS10, TX_PWR_CFG_3: unknown,
4807                  * TX_PWR_CFG_4: unknown
4808                  */
4809                 txpower = rt2x00_get_field16(eeprom,
4810                                              EEPROM_TXPOWER_BYRATE_RATE2);
4811                 txpower = rt2800_compensate_txpower(rt2x00dev, is_rate_b, band,
4812                                              power_level, txpower, delta);
4813                 rt2x00_set_field32(&reg, TX_PWR_CFG_RATE6, txpower);
4814
4815                 /*
4816                  * TX_PWR_CFG_0: 18MBS, TX_PWR_CFG_1: MCS3,
4817                  * TX_PWR_CFG_2: MCS11, TX_PWR_CFG_3: unknown,
4818                  * TX_PWR_CFG_4: unknown
4819                  */
4820                 txpower = rt2x00_get_field16(eeprom,
4821                                              EEPROM_TXPOWER_BYRATE_RATE3);
4822                 txpower = rt2800_compensate_txpower(rt2x00dev, is_rate_b, band,
4823                                              power_level, txpower, delta);
4824                 rt2x00_set_field32(&reg, TX_PWR_CFG_RATE7, txpower);
4825
4826                 rt2800_register_write(rt2x00dev, offset, reg);
4827
4828                 /* next TX_PWR_CFG register */
4829                 offset += 4;
4830         }
4831 }
4832
4833 static void rt2800_config_txpower(struct rt2x00_dev *rt2x00dev,
4834                                   struct ieee80211_channel *chan,
4835                                   int power_level)
4836 {
4837         if (rt2x00_rt(rt2x00dev, RT3593))
4838                 rt2800_config_txpower_rt3593(rt2x00dev, chan, power_level);
4839         else if (rt2x00_rt(rt2x00dev, RT6352))
4840                 rt2800_config_txpower_rt6352(rt2x00dev, chan, power_level);
4841         else
4842                 rt2800_config_txpower_rt28xx(rt2x00dev, chan, power_level);
4843 }
4844
4845 void rt2800_gain_calibration(struct rt2x00_dev *rt2x00dev)
4846 {
4847         rt2800_config_txpower(rt2x00dev, rt2x00dev->hw->conf.chandef.chan,
4848                               rt2x00dev->tx_power);
4849 }
4850 EXPORT_SYMBOL_GPL(rt2800_gain_calibration);
4851
4852 void rt2800_vco_calibration(struct rt2x00_dev *rt2x00dev)
4853 {
4854         u32     tx_pin;
4855         u8      rfcsr;
4856         unsigned long min_sleep = 0;
4857
4858         /*
4859          * A voltage-controlled oscillator(VCO) is an electronic oscillator
4860          * designed to be controlled in oscillation frequency by a voltage
4861          * input. Maybe the temperature will affect the frequency of
4862          * oscillation to be shifted. The VCO calibration will be called
4863          * periodically to adjust the frequency to be precision.
4864         */
4865
4866         tx_pin = rt2800_register_read(rt2x00dev, TX_PIN_CFG);
4867         tx_pin &= TX_PIN_CFG_PA_PE_DISABLE;
4868         rt2800_register_write(rt2x00dev, TX_PIN_CFG, tx_pin);
4869
4870         switch (rt2x00dev->chip.rf) {
4871         case RF2020:
4872         case RF3020:
4873         case RF3021:
4874         case RF3022:
4875         case RF3320:
4876         case RF3052:
4877                 rfcsr = rt2800_rfcsr_read(rt2x00dev, 7);
4878                 rt2x00_set_field8(&rfcsr, RFCSR7_RF_TUNING, 1);
4879                 rt2800_rfcsr_write(rt2x00dev, 7, rfcsr);
4880                 break;
4881         case RF3053:
4882         case RF3070:
4883         case RF3290:
4884         case RF5350:
4885         case RF5360:
4886         case RF5362:
4887         case RF5370:
4888         case RF5372:
4889         case RF5390:
4890         case RF5392:
4891         case RF5592:
4892                 rfcsr = rt2800_rfcsr_read(rt2x00dev, 3);
4893                 rt2x00_set_field8(&rfcsr, RFCSR3_VCOCAL_EN, 1);
4894                 rt2800_rfcsr_write(rt2x00dev, 3, rfcsr);
4895                 min_sleep = 1000;
4896                 break;
4897         case RF7620:
4898                 rt2800_rfcsr_write(rt2x00dev, 5, 0x40);
4899                 rt2800_rfcsr_write(rt2x00dev, 4, 0x0C);
4900                 rfcsr = rt2800_rfcsr_read(rt2x00dev, 4);
4901                 rt2x00_set_field8(&rfcsr, RFCSR4_VCOCAL_EN, 1);
4902                 rt2800_rfcsr_write(rt2x00dev, 4, rfcsr);
4903                 min_sleep = 2000;
4904                 break;
4905         default:
4906                 WARN_ONCE(1, "Not supported RF chipet %x for VCO recalibration",
4907                           rt2x00dev->chip.rf);
4908                 return;
4909         }
4910
4911         if (min_sleep > 0)
4912                 usleep_range(min_sleep, min_sleep * 2);
4913
4914         tx_pin = rt2800_register_read(rt2x00dev, TX_PIN_CFG);
4915         if (rt2x00dev->rf_channel <= 14) {
4916                 switch (rt2x00dev->default_ant.tx_chain_num) {
4917                 case 3:
4918                         rt2x00_set_field32(&tx_pin, TX_PIN_CFG_PA_PE_G2_EN, 1);
4919                         /* fall through */
4920                 case 2:
4921                         rt2x00_set_field32(&tx_pin, TX_PIN_CFG_PA_PE_G1_EN, 1);
4922                         /* fall through */
4923                 case 1:
4924                 default:
4925                         rt2x00_set_field32(&tx_pin, TX_PIN_CFG_PA_PE_G0_EN, 1);
4926                         break;
4927                 }
4928         } else {
4929                 switch (rt2x00dev->default_ant.tx_chain_num) {
4930                 case 3:
4931                         rt2x00_set_field32(&tx_pin, TX_PIN_CFG_PA_PE_A2_EN, 1);
4932                         /* fall through */
4933                 case 2:
4934                         rt2x00_set_field32(&tx_pin, TX_PIN_CFG_PA_PE_A1_EN, 1);
4935                         /* fall through */
4936                 case 1:
4937                 default:
4938                         rt2x00_set_field32(&tx_pin, TX_PIN_CFG_PA_PE_A0_EN, 1);
4939                         break;
4940                 }
4941         }
4942         rt2800_register_write(rt2x00dev, TX_PIN_CFG, tx_pin);
4943
4944         if (rt2x00_rt(rt2x00dev, RT6352)) {
4945                 if (rt2x00dev->default_ant.rx_chain_num == 1) {
4946                         rt2800_bbp_write(rt2x00dev, 91, 0x07);
4947                         rt2800_bbp_write(rt2x00dev, 95, 0x1A);
4948                         rt2800_bbp_write(rt2x00dev, 195, 128);
4949                         rt2800_bbp_write(rt2x00dev, 196, 0xA0);
4950                         rt2800_bbp_write(rt2x00dev, 195, 170);
4951                         rt2800_bbp_write(rt2x00dev, 196, 0x12);
4952                         rt2800_bbp_write(rt2x00dev, 195, 171);
4953                         rt2800_bbp_write(rt2x00dev, 196, 0x10);
4954                 } else {
4955                         rt2800_bbp_write(rt2x00dev, 91, 0x06);
4956                         rt2800_bbp_write(rt2x00dev, 95, 0x9A);
4957                         rt2800_bbp_write(rt2x00dev, 195, 128);
4958                         rt2800_bbp_write(rt2x00dev, 196, 0xE0);
4959                         rt2800_bbp_write(rt2x00dev, 195, 170);
4960                         rt2800_bbp_write(rt2x00dev, 196, 0x30);
4961                         rt2800_bbp_write(rt2x00dev, 195, 171);
4962                         rt2800_bbp_write(rt2x00dev, 196, 0x30);
4963                 }
4964
4965                 if (rt2x00_has_cap_external_lna_bg(rt2x00dev)) {
4966                         rt2800_bbp_write(rt2x00dev, 75, 0x68);
4967                         rt2800_bbp_write(rt2x00dev, 76, 0x4C);
4968                         rt2800_bbp_write(rt2x00dev, 79, 0x1C);
4969                         rt2800_bbp_write(rt2x00dev, 80, 0x0C);
4970                         rt2800_bbp_write(rt2x00dev, 82, 0xB6);
4971                 }
4972
4973                 /* On 11A, We should delay and wait RF/BBP to be stable
4974                  * and the appropriate time should be 1000 micro seconds
4975                  * 2005/06/05 - On 11G, we also need this delay time.
4976                  * Otherwise it's difficult to pass the WHQL.
4977                  */
4978                 usleep_range(1000, 1500);
4979         }
4980 }
4981 EXPORT_SYMBOL_GPL(rt2800_vco_calibration);
4982
4983 static void rt2800_config_retry_limit(struct rt2x00_dev *rt2x00dev,
4984                                       struct rt2x00lib_conf *libconf)
4985 {
4986         u32 reg;
4987
4988         reg = rt2800_register_read(rt2x00dev, TX_RTY_CFG);
4989         rt2x00_set_field32(&reg, TX_RTY_CFG_SHORT_RTY_LIMIT,
4990                            libconf->conf->short_frame_max_tx_count);
4991         rt2x00_set_field32(&reg, TX_RTY_CFG_LONG_RTY_LIMIT,
4992                            libconf->conf->long_frame_max_tx_count);
4993         rt2800_register_write(rt2x00dev, TX_RTY_CFG, reg);
4994 }
4995
4996 static void rt2800_config_ps(struct rt2x00_dev *rt2x00dev,
4997                              struct rt2x00lib_conf *libconf)
4998 {
4999         enum dev_state state =
5000             (libconf->conf->flags & IEEE80211_CONF_PS) ?
5001                 STATE_SLEEP : STATE_AWAKE;
5002         u32 reg;
5003
5004         if (state == STATE_SLEEP) {
5005                 rt2800_register_write(rt2x00dev, AUTOWAKEUP_CFG, 0);
5006
5007                 reg = rt2800_register_read(rt2x00dev, AUTOWAKEUP_CFG);
5008                 rt2x00_set_field32(&reg, AUTOWAKEUP_CFG_AUTO_LEAD_TIME, 5);
5009                 rt2x00_set_field32(&reg, AUTOWAKEUP_CFG_TBCN_BEFORE_WAKE,
5010                                    libconf->conf->listen_interval - 1);
5011                 rt2x00_set_field32(&reg, AUTOWAKEUP_CFG_AUTOWAKE, 1);
5012                 rt2800_register_write(rt2x00dev, AUTOWAKEUP_CFG, reg);
5013
5014                 rt2x00dev->ops->lib->set_device_state(rt2x00dev, state);
5015         } else {
5016                 reg = rt2800_register_read(rt2x00dev, AUTOWAKEUP_CFG);
5017                 rt2x00_set_field32(&reg, AUTOWAKEUP_CFG_AUTO_LEAD_TIME, 0);
5018                 rt2x00_set_field32(&reg, AUTOWAKEUP_CFG_TBCN_BEFORE_WAKE, 0);
5019                 rt2x00_set_field32(&reg, AUTOWAKEUP_CFG_AUTOWAKE, 0);
5020                 rt2800_register_write(rt2x00dev, AUTOWAKEUP_CFG, reg);
5021
5022                 rt2x00dev->ops->lib->set_device_state(rt2x00dev, state);
5023         }
5024 }
5025
5026 void rt2800_config(struct rt2x00_dev *rt2x00dev,
5027                    struct rt2x00lib_conf *libconf,
5028                    const unsigned int flags)
5029 {
5030         /* Always recalculate LNA gain before changing configuration */
5031         rt2800_config_lna_gain(rt2x00dev, libconf);
5032
5033         if (flags & IEEE80211_CONF_CHANGE_CHANNEL) {
5034                 rt2800_config_channel(rt2x00dev, libconf->conf,
5035                                       &libconf->rf, &libconf->channel);
5036                 rt2800_config_txpower(rt2x00dev, libconf->conf->chandef.chan,
5037                                       libconf->conf->power_level);
5038         }
5039         if (flags & IEEE80211_CONF_CHANGE_POWER)
5040                 rt2800_config_txpower(rt2x00dev, libconf->conf->chandef.chan,
5041                                       libconf->conf->power_level);
5042         if (flags & IEEE80211_CONF_CHANGE_RETRY_LIMITS)
5043                 rt2800_config_retry_limit(rt2x00dev, libconf);
5044         if (flags & IEEE80211_CONF_CHANGE_PS)
5045                 rt2800_config_ps(rt2x00dev, libconf);
5046 }
5047 EXPORT_SYMBOL_GPL(rt2800_config);
5048
5049 /*
5050  * Link tuning
5051  */
5052 void rt2800_link_stats(struct rt2x00_dev *rt2x00dev, struct link_qual *qual)
5053 {
5054         u32 reg;
5055
5056         /*
5057          * Update FCS error count from register.
5058          */
5059         reg = rt2800_register_read(rt2x00dev, RX_STA_CNT0);
5060         qual->rx_failed = rt2x00_get_field32(reg, RX_STA_CNT0_CRC_ERR);
5061 }
5062 EXPORT_SYMBOL_GPL(rt2800_link_stats);
5063
5064 static u8 rt2800_get_default_vgc(struct rt2x00_dev *rt2x00dev)
5065 {
5066         u8 vgc;
5067
5068         if (rt2x00dev->curr_band == NL80211_BAND_2GHZ) {
5069                 if (rt2x00_rt(rt2x00dev, RT3070) ||
5070                     rt2x00_rt(rt2x00dev, RT3071) ||
5071                     rt2x00_rt(rt2x00dev, RT3090) ||
5072                     rt2x00_rt(rt2x00dev, RT3290) ||
5073                     rt2x00_rt(rt2x00dev, RT3390) ||
5074                     rt2x00_rt(rt2x00dev, RT3572) ||
5075                     rt2x00_rt(rt2x00dev, RT3593) ||
5076                     rt2x00_rt(rt2x00dev, RT5390) ||
5077                     rt2x00_rt(rt2x00dev, RT5392) ||
5078                     rt2x00_rt(rt2x00dev, RT5592) ||
5079                     rt2x00_rt(rt2x00dev, RT6352))
5080                         vgc = 0x1c + (2 * rt2x00dev->lna_gain);
5081                 else
5082                         vgc = 0x2e + rt2x00dev->lna_gain;
5083         } else { /* 5GHZ band */
5084                 if (rt2x00_rt(rt2x00dev, RT3593))
5085                         vgc = 0x20 + (rt2x00dev->lna_gain * 5) / 3;
5086                 else if (rt2x00_rt(rt2x00dev, RT5592))
5087                         vgc = 0x24 + (2 * rt2x00dev->lna_gain);
5088                 else {
5089                         if (!test_bit(CONFIG_CHANNEL_HT40, &rt2x00dev->flags))
5090                                 vgc = 0x32 + (rt2x00dev->lna_gain * 5) / 3;
5091                         else
5092                                 vgc = 0x3a + (rt2x00dev->lna_gain * 5) / 3;
5093                 }
5094         }
5095
5096         return vgc;
5097 }
5098
5099 static inline void rt2800_set_vgc(struct rt2x00_dev *rt2x00dev,
5100                                   struct link_qual *qual, u8 vgc_level)
5101 {
5102         if (qual->vgc_level != vgc_level) {
5103                 if (rt2x00_rt(rt2x00dev, RT3572) ||
5104                     rt2x00_rt(rt2x00dev, RT3593)) {
5105                         rt2800_bbp_write_with_rx_chain(rt2x00dev, 66,
5106                                                        vgc_level);
5107                 } else if (rt2x00_rt(rt2x00dev, RT5592)) {
5108                         rt2800_bbp_write(rt2x00dev, 83, qual->rssi > -65 ? 0x4a : 0x7a);
5109                         rt2800_bbp_write_with_rx_chain(rt2x00dev, 66, vgc_level);
5110                 } else {
5111                         rt2800_bbp_write(rt2x00dev, 66, vgc_level);
5112                 }
5113
5114                 qual->vgc_level = vgc_level;
5115                 qual->vgc_level_reg = vgc_level;
5116         }
5117 }
5118
5119 void rt2800_reset_tuner(struct rt2x00_dev *rt2x00dev, struct link_qual *qual)
5120 {
5121         rt2800_set_vgc(rt2x00dev, qual, rt2800_get_default_vgc(rt2x00dev));
5122 }
5123 EXPORT_SYMBOL_GPL(rt2800_reset_tuner);
5124
5125 void rt2800_link_tuner(struct rt2x00_dev *rt2x00dev, struct link_qual *qual,
5126                        const u32 count)
5127 {
5128         u8 vgc;
5129
5130         if (rt2x00_rt_rev(rt2x00dev, RT2860, REV_RT2860C))
5131                 return;
5132
5133         /* When RSSI is better than a certain threshold, increase VGC
5134          * with a chip specific value in order to improve the balance
5135          * between sensibility and noise isolation.
5136          */
5137
5138         vgc = rt2800_get_default_vgc(rt2x00dev);
5139
5140         switch (rt2x00dev->chip.rt) {
5141         case RT3572:
5142         case RT3593:
5143                 if (qual->rssi > -65) {
5144                         if (rt2x00dev->curr_band == NL80211_BAND_2GHZ)
5145                                 vgc += 0x20;
5146                         else
5147                                 vgc += 0x10;
5148                 }
5149                 break;
5150
5151         case RT5592:
5152                 if (qual->rssi > -65)
5153                         vgc += 0x20;
5154                 break;
5155
5156         default:
5157                 if (qual->rssi > -80)
5158                         vgc += 0x10;
5159                 break;
5160         }
5161
5162         rt2800_set_vgc(rt2x00dev, qual, vgc);
5163 }
5164 EXPORT_SYMBOL_GPL(rt2800_link_tuner);
5165
5166 /*
5167  * Initialization functions.
5168  */
5169 static int rt2800_init_registers(struct rt2x00_dev *rt2x00dev)
5170 {
5171         struct rt2800_drv_data *drv_data = rt2x00dev->drv_data;
5172         u32 reg;
5173         u16 eeprom;
5174         unsigned int i;
5175         int ret;
5176
5177         rt2800_disable_wpdma(rt2x00dev);
5178
5179         ret = rt2800_drv_init_registers(rt2x00dev);
5180         if (ret)
5181                 return ret;
5182
5183         rt2800_register_write(rt2x00dev, LEGACY_BASIC_RATE, 0x0000013f);
5184         rt2800_register_write(rt2x00dev, HT_BASIC_RATE, 0x00008003);
5185
5186         rt2800_register_write(rt2x00dev, MAC_SYS_CTRL, 0x00000000);
5187
5188         reg = rt2800_register_read(rt2x00dev, BCN_TIME_CFG);
5189         rt2x00_set_field32(&reg, BCN_TIME_CFG_BEACON_INTERVAL, 1600);
5190         rt2x00_set_field32(&reg, BCN_TIME_CFG_TSF_TICKING, 0);
5191         rt2x00_set_field32(&reg, BCN_TIME_CFG_TSF_SYNC, 0);
5192         rt2x00_set_field32(&reg, BCN_TIME_CFG_TBTT_ENABLE, 0);
5193         rt2x00_set_field32(&reg, BCN_TIME_CFG_BEACON_GEN, 0);
5194         rt2x00_set_field32(&reg, BCN_TIME_CFG_TX_TIME_COMPENSATE, 0);
5195         rt2800_register_write(rt2x00dev, BCN_TIME_CFG, reg);
5196
5197         rt2800_config_filter(rt2x00dev, FIF_ALLMULTI);
5198
5199         reg = rt2800_register_read(rt2x00dev, BKOFF_SLOT_CFG);
5200         rt2x00_set_field32(&reg, BKOFF_SLOT_CFG_SLOT_TIME, 9);
5201         rt2x00_set_field32(&reg, BKOFF_SLOT_CFG_CC_DELAY_TIME, 2);
5202         rt2800_register_write(rt2x00dev, BKOFF_SLOT_CFG, reg);
5203
5204         if (rt2x00_rt(rt2x00dev, RT3290)) {
5205                 reg = rt2800_register_read(rt2x00dev, WLAN_FUN_CTRL);
5206                 if (rt2x00_get_field32(reg, WLAN_EN) == 1) {
5207                         rt2x00_set_field32(&reg, PCIE_APP0_CLK_REQ, 1);
5208                         rt2800_register_write(rt2x00dev, WLAN_FUN_CTRL, reg);
5209                 }
5210
5211                 reg = rt2800_register_read(rt2x00dev, CMB_CTRL);
5212                 if (!(rt2x00_get_field32(reg, LDO0_EN) == 1)) {
5213                         rt2x00_set_field32(&reg, LDO0_EN, 1);
5214                         rt2x00_set_field32(&reg, LDO_BGSEL, 3);
5215                         rt2800_register_write(rt2x00dev, CMB_CTRL, reg);
5216                 }
5217
5218                 reg = rt2800_register_read(rt2x00dev, OSC_CTRL);
5219                 rt2x00_set_field32(&reg, OSC_ROSC_EN, 1);
5220                 rt2x00_set_field32(&reg, OSC_CAL_REQ, 1);
5221                 rt2x00_set_field32(&reg, OSC_REF_CYCLE, 0x27);
5222                 rt2800_register_write(rt2x00dev, OSC_CTRL, reg);
5223
5224                 reg = rt2800_register_read(rt2x00dev, COEX_CFG0);
5225                 rt2x00_set_field32(&reg, COEX_CFG_ANT, 0x5e);
5226                 rt2800_register_write(rt2x00dev, COEX_CFG0, reg);
5227
5228                 reg = rt2800_register_read(rt2x00dev, COEX_CFG2);
5229                 rt2x00_set_field32(&reg, BT_COEX_CFG1, 0x00);
5230                 rt2x00_set_field32(&reg, BT_COEX_CFG0, 0x17);
5231                 rt2x00_set_field32(&reg, WL_COEX_CFG1, 0x93);
5232                 rt2x00_set_field32(&reg, WL_COEX_CFG0, 0x7f);
5233                 rt2800_register_write(rt2x00dev, COEX_CFG2, reg);
5234
5235                 reg = rt2800_register_read(rt2x00dev, PLL_CTRL);
5236                 rt2x00_set_field32(&reg, PLL_CONTROL, 1);
5237                 rt2800_register_write(rt2x00dev, PLL_CTRL, reg);
5238         }
5239
5240         if (rt2x00_rt(rt2x00dev, RT3071) ||
5241             rt2x00_rt(rt2x00dev, RT3090) ||
5242             rt2x00_rt(rt2x00dev, RT3290) ||
5243             rt2x00_rt(rt2x00dev, RT3390)) {
5244
5245                 if (rt2x00_rt(rt2x00dev, RT3290))
5246                         rt2800_register_write(rt2x00dev, TX_SW_CFG0,
5247                                               0x00000404);
5248                 else
5249                         rt2800_register_write(rt2x00dev, TX_SW_CFG0,
5250                                               0x00000400);
5251
5252                 rt2800_register_write(rt2x00dev, TX_SW_CFG1, 0x00000000);
5253                 if (rt2x00_rt_rev_lt(rt2x00dev, RT3071, REV_RT3071E) ||
5254                     rt2x00_rt_rev_lt(rt2x00dev, RT3090, REV_RT3090E) ||
5255                     rt2x00_rt_rev_lt(rt2x00dev, RT3390, REV_RT3390E)) {
5256                         eeprom = rt2800_eeprom_read(rt2x00dev, EEPROM_NIC_CONF1);
5257                         if (rt2x00_get_field16(eeprom, EEPROM_NIC_CONF1_DAC_TEST))
5258                                 rt2800_register_write(rt2x00dev, TX_SW_CFG2,
5259                                                       0x0000002c);
5260                         else
5261                                 rt2800_register_write(rt2x00dev, TX_SW_CFG2,
5262                                                       0x0000000f);
5263                 } else {
5264                         rt2800_register_write(rt2x00dev, TX_SW_CFG2, 0x00000000);
5265                 }
5266         } else if (rt2x00_rt(rt2x00dev, RT3070)) {
5267                 rt2800_register_write(rt2x00dev, TX_SW_CFG0, 0x00000400);
5268
5269                 if (rt2x00_rt_rev_lt(rt2x00dev, RT3070, REV_RT3070F)) {
5270                         rt2800_register_write(rt2x00dev, TX_SW_CFG1, 0x00000000);
5271                         rt2800_register_write(rt2x00dev, TX_SW_CFG2, 0x0000002c);
5272                 } else {
5273                         rt2800_register_write(rt2x00dev, TX_SW_CFG1, 0x00080606);
5274                         rt2800_register_write(rt2x00dev, TX_SW_CFG2, 0x00000000);
5275                 }
5276         } else if (rt2800_is_305x_soc(rt2x00dev)) {
5277                 rt2800_register_write(rt2x00dev, TX_SW_CFG0, 0x00000400);
5278                 rt2800_register_write(rt2x00dev, TX_SW_CFG1, 0x00000000);
5279                 rt2800_register_write(rt2x00dev, TX_SW_CFG2, 0x00000030);
5280         } else if (rt2x00_rt(rt2x00dev, RT3352)) {
5281                 rt2800_register_write(rt2x00dev, TX_SW_CFG0, 0x00000402);
5282                 rt2800_register_write(rt2x00dev, TX_SW_CFG1, 0x00080606);
5283                 rt2800_register_write(rt2x00dev, TX_SW_CFG2, 0x00000000);
5284         } else if (rt2x00_rt(rt2x00dev, RT3572)) {
5285                 rt2800_register_write(rt2x00dev, TX_SW_CFG0, 0x00000400);
5286                 rt2800_register_write(rt2x00dev, TX_SW_CFG1, 0x00080606);
5287         } else if (rt2x00_rt(rt2x00dev, RT3593)) {
5288                 rt2800_register_write(rt2x00dev, TX_SW_CFG0, 0x00000402);
5289                 rt2800_register_write(rt2x00dev, TX_SW_CFG1, 0x00000000);
5290                 if (rt2x00_rt_rev_lt(rt2x00dev, RT3593, REV_RT3593E)) {
5291                         eeprom = rt2800_eeprom_read(rt2x00dev, EEPROM_NIC_CONF1);
5292                         if (rt2x00_get_field16(eeprom,
5293                                                EEPROM_NIC_CONF1_DAC_TEST))
5294                                 rt2800_register_write(rt2x00dev, TX_SW_CFG2,
5295                                                       0x0000001f);
5296                         else
5297                                 rt2800_register_write(rt2x00dev, TX_SW_CFG2,
5298                                                       0x0000000f);
5299                 } else {
5300                         rt2800_register_write(rt2x00dev, TX_SW_CFG2,
5301                                               0x00000000);
5302                 }
5303         } else if (rt2x00_rt(rt2x00dev, RT5390) ||
5304                    rt2x00_rt(rt2x00dev, RT5392) ||
5305                    rt2x00_rt(rt2x00dev, RT6352)) {
5306                 rt2800_register_write(rt2x00dev, TX_SW_CFG0, 0x00000404);
5307                 rt2800_register_write(rt2x00dev, TX_SW_CFG1, 0x00080606);
5308                 rt2800_register_write(rt2x00dev, TX_SW_CFG2, 0x00000000);
5309         } else if (rt2x00_rt(rt2x00dev, RT5592)) {
5310                 rt2800_register_write(rt2x00dev, TX_SW_CFG0, 0x00000404);
5311                 rt2800_register_write(rt2x00dev, TX_SW_CFG1, 0x00000000);
5312                 rt2800_register_write(rt2x00dev, TX_SW_CFG2, 0x00000000);
5313         } else if (rt2x00_rt(rt2x00dev, RT5350)) {
5314                 rt2800_register_write(rt2x00dev, TX_SW_CFG0, 0x00000404);
5315         } else if (rt2x00_rt(rt2x00dev, RT6352)) {
5316                 rt2800_register_write(rt2x00dev, TX_SW_CFG0, 0x00000401);
5317                 rt2800_register_write(rt2x00dev, TX_SW_CFG1, 0x000C0000);
5318                 rt2800_register_write(rt2x00dev, TX_SW_CFG2, 0x00000000);
5319                 rt2800_register_write(rt2x00dev, MIMO_PS_CFG, 0x00000002);
5320                 rt2800_register_write(rt2x00dev, TX_PIN_CFG, 0x00150F0F);
5321                 rt2800_register_write(rt2x00dev, TX_ALC_VGA3, 0x06060606);
5322                 rt2800_register_write(rt2x00dev, TX0_BB_GAIN_ATTEN, 0x0);
5323                 rt2800_register_write(rt2x00dev, TX1_BB_GAIN_ATTEN, 0x0);
5324                 rt2800_register_write(rt2x00dev, TX0_RF_GAIN_ATTEN, 0x6C6C666C);
5325                 rt2800_register_write(rt2x00dev, TX1_RF_GAIN_ATTEN, 0x6C6C666C);
5326                 rt2800_register_write(rt2x00dev, TX0_RF_GAIN_CORRECT,
5327                                       0x3630363A);
5328                 rt2800_register_write(rt2x00dev, TX1_RF_GAIN_CORRECT,
5329                                       0x3630363A);
5330                 reg = rt2800_register_read(rt2x00dev, TX_ALC_CFG_1);
5331                 rt2x00_set_field32(&reg, TX_ALC_CFG_1_ROS_BUSY_EN, 0);
5332                 rt2800_register_write(rt2x00dev, TX_ALC_CFG_1, reg);
5333         } else {
5334                 rt2800_register_write(rt2x00dev, TX_SW_CFG0, 0x00000000);
5335                 rt2800_register_write(rt2x00dev, TX_SW_CFG1, 0x00080606);
5336         }
5337
5338         reg = rt2800_register_read(rt2x00dev, TX_LINK_CFG);
5339         rt2x00_set_field32(&reg, TX_LINK_CFG_REMOTE_MFB_LIFETIME, 32);
5340         rt2x00_set_field32(&reg, TX_LINK_CFG_MFB_ENABLE, 0);
5341         rt2x00_set_field32(&reg, TX_LINK_CFG_REMOTE_UMFS_ENABLE, 0);
5342         rt2x00_set_field32(&reg, TX_LINK_CFG_TX_MRQ_EN, 0);
5343         rt2x00_set_field32(&reg, TX_LINK_CFG_TX_RDG_EN, 0);
5344         rt2x00_set_field32(&reg, TX_LINK_CFG_TX_CF_ACK_EN, 1);
5345         rt2x00_set_field32(&reg, TX_LINK_CFG_REMOTE_MFB, 0);
5346         rt2x00_set_field32(&reg, TX_LINK_CFG_REMOTE_MFS, 0);
5347         rt2800_register_write(rt2x00dev, TX_LINK_CFG, reg);
5348
5349         reg = rt2800_register_read(rt2x00dev, TX_TIMEOUT_CFG);
5350         rt2x00_set_field32(&reg, TX_TIMEOUT_CFG_MPDU_LIFETIME, 9);
5351         rt2x00_set_field32(&reg, TX_TIMEOUT_CFG_RX_ACK_TIMEOUT, 32);
5352         rt2x00_set_field32(&reg, TX_TIMEOUT_CFG_TX_OP_TIMEOUT, 10);
5353         rt2800_register_write(rt2x00dev, TX_TIMEOUT_CFG, reg);
5354
5355         reg = rt2800_register_read(rt2x00dev, MAX_LEN_CFG);
5356         rt2x00_set_field32(&reg, MAX_LEN_CFG_MAX_MPDU, AGGREGATION_SIZE);
5357         if (rt2x00_is_usb(rt2x00dev)) {
5358                 drv_data->max_psdu = 3;
5359         } else if (rt2x00_rt_rev_gte(rt2x00dev, RT2872, REV_RT2872E) ||
5360                    rt2x00_rt(rt2x00dev, RT2883) ||
5361                    rt2x00_rt_rev_lt(rt2x00dev, RT3070, REV_RT3070E)) {
5362                 drv_data->max_psdu = 2;
5363         } else {
5364                 drv_data->max_psdu = 1;
5365         }
5366         rt2x00_set_field32(&reg, MAX_LEN_CFG_MAX_PSDU, drv_data->max_psdu);
5367         rt2x00_set_field32(&reg, MAX_LEN_CFG_MIN_PSDU, 10);
5368         rt2x00_set_field32(&reg, MAX_LEN_CFG_MIN_MPDU, 10);
5369         rt2800_register_write(rt2x00dev, MAX_LEN_CFG, reg);
5370
5371         reg = rt2800_register_read(rt2x00dev, LED_CFG);
5372         rt2x00_set_field32(&reg, LED_CFG_ON_PERIOD, 70);
5373         rt2x00_set_field32(&reg, LED_CFG_OFF_PERIOD, 30);
5374         rt2x00_set_field32(&reg, LED_CFG_SLOW_BLINK_PERIOD, 3);
5375         rt2x00_set_field32(&reg, LED_CFG_R_LED_MODE, 3);
5376         rt2x00_set_field32(&reg, LED_CFG_G_LED_MODE, 3);
5377         rt2x00_set_field32(&reg, LED_CFG_Y_LED_MODE, 3);
5378         rt2x00_set_field32(&reg, LED_CFG_LED_POLAR, 1);
5379         rt2800_register_write(rt2x00dev, LED_CFG, reg);
5380
5381         rt2800_register_write(rt2x00dev, PBF_MAX_PCNT, 0x1f3fbf9f);
5382
5383         reg = rt2800_register_read(rt2x00dev, TX_RTY_CFG);
5384         rt2x00_set_field32(&reg, TX_RTY_CFG_SHORT_RTY_LIMIT, 2);
5385         rt2x00_set_field32(&reg, TX_RTY_CFG_LONG_RTY_LIMIT, 2);
5386         rt2x00_set_field32(&reg, TX_RTY_CFG_LONG_RTY_THRE, 2000);
5387         rt2x00_set_field32(&reg, TX_RTY_CFG_NON_AGG_RTY_MODE, 0);
5388         rt2x00_set_field32(&reg, TX_RTY_CFG_AGG_RTY_MODE, 0);
5389         rt2x00_set_field32(&reg, TX_RTY_CFG_TX_AUTO_FB_ENABLE, 1);
5390         rt2800_register_write(rt2x00dev, TX_RTY_CFG, reg);
5391
5392         reg = rt2800_register_read(rt2x00dev, AUTO_RSP_CFG);
5393         rt2x00_set_field32(&reg, AUTO_RSP_CFG_AUTORESPONDER, 1);
5394         rt2x00_set_field32(&reg, AUTO_RSP_CFG_BAC_ACK_POLICY, 1);
5395         rt2x00_set_field32(&reg, AUTO_RSP_CFG_CTS_40_MMODE, 1);
5396         rt2x00_set_field32(&reg, AUTO_RSP_CFG_CTS_40_MREF, 0);
5397         rt2x00_set_field32(&reg, AUTO_RSP_CFG_AR_PREAMBLE, 0);
5398         rt2x00_set_field32(&reg, AUTO_RSP_CFG_DUAL_CTS_EN, 0);
5399         rt2x00_set_field32(&reg, AUTO_RSP_CFG_ACK_CTS_PSM_BIT, 0);
5400         rt2800_register_write(rt2x00dev, AUTO_RSP_CFG, reg);
5401
5402         reg = rt2800_register_read(rt2x00dev, CCK_PROT_CFG);
5403         rt2x00_set_field32(&reg, CCK_PROT_CFG_PROTECT_RATE, 3);
5404         rt2x00_set_field32(&reg, CCK_PROT_CFG_PROTECT_CTRL, 0);
5405         rt2x00_set_field32(&reg, CCK_PROT_CFG_PROTECT_NAV_SHORT, 1);
5406         rt2x00_set_field32(&reg, CCK_PROT_CFG_TX_OP_ALLOW_CCK, 1);
5407         rt2x00_set_field32(&reg, CCK_PROT_CFG_TX_OP_ALLOW_OFDM, 1);
5408         rt2x00_set_field32(&reg, CCK_PROT_CFG_TX_OP_ALLOW_MM20, 1);
5409         rt2x00_set_field32(&reg, CCK_PROT_CFG_TX_OP_ALLOW_MM40, 0);
5410         rt2x00_set_field32(&reg, CCK_PROT_CFG_TX_OP_ALLOW_GF20, 1);
5411         rt2x00_set_field32(&reg, CCK_PROT_CFG_TX_OP_ALLOW_GF40, 0);
5412         rt2x00_set_field32(&reg, CCK_PROT_CFG_RTS_TH_EN, 1);
5413         rt2800_register_write(rt2x00dev, CCK_PROT_CFG, reg);
5414
5415         reg = rt2800_register_read(rt2x00dev, OFDM_PROT_CFG);
5416         rt2x00_set_field32(&reg, OFDM_PROT_CFG_PROTECT_RATE, 3);
5417         rt2x00_set_field32(&reg, OFDM_PROT_CFG_PROTECT_CTRL, 0);
5418         rt2x00_set_field32(&reg, OFDM_PROT_CFG_PROTECT_NAV_SHORT, 1);
5419         rt2x00_set_field32(&reg, OFDM_PROT_CFG_TX_OP_ALLOW_CCK, 1);
5420         rt2x00_set_field32(&reg, OFDM_PROT_CFG_TX_OP_ALLOW_OFDM, 1);
5421         rt2x00_set_field32(&reg, OFDM_PROT_CFG_TX_OP_ALLOW_MM20, 1);
5422         rt2x00_set_field32(&reg, OFDM_PROT_CFG_TX_OP_ALLOW_MM40, 0);
5423         rt2x00_set_field32(&reg, OFDM_PROT_CFG_TX_OP_ALLOW_GF20, 1);
5424         rt2x00_set_field32(&reg, OFDM_PROT_CFG_TX_OP_ALLOW_GF40, 0);
5425         rt2x00_set_field32(&reg, OFDM_PROT_CFG_RTS_TH_EN, 1);
5426         rt2800_register_write(rt2x00dev, OFDM_PROT_CFG, reg);
5427
5428         reg = rt2800_register_read(rt2x00dev, MM20_PROT_CFG);
5429         rt2x00_set_field32(&reg, MM20_PROT_CFG_PROTECT_RATE, 0x4004);
5430         rt2x00_set_field32(&reg, MM20_PROT_CFG_PROTECT_CTRL, 1);
5431         rt2x00_set_field32(&reg, MM20_PROT_CFG_PROTECT_NAV_SHORT, 1);
5432         rt2x00_set_field32(&reg, MM20_PROT_CFG_TX_OP_ALLOW_CCK, 0);
5433         rt2x00_set_field32(&reg, MM20_PROT_CFG_TX_OP_ALLOW_OFDM, 1);
5434         rt2x00_set_field32(&reg, MM20_PROT_CFG_TX_OP_ALLOW_MM20, 1);
5435         rt2x00_set_field32(&reg, MM20_PROT_CFG_TX_OP_ALLOW_MM40, 0);
5436         rt2x00_set_field32(&reg, MM20_PROT_CFG_TX_OP_ALLOW_GF20, 1);
5437         rt2x00_set_field32(&reg, MM20_PROT_CFG_TX_OP_ALLOW_GF40, 0);
5438         rt2x00_set_field32(&reg, MM20_PROT_CFG_RTS_TH_EN, 0);
5439         rt2800_register_write(rt2x00dev, MM20_PROT_CFG, reg);
5440
5441         reg = rt2800_register_read(rt2x00dev, MM40_PROT_CFG);
5442         rt2x00_set_field32(&reg, MM40_PROT_CFG_PROTECT_RATE, 0x4084);
5443         rt2x00_set_field32(&reg, MM40_PROT_CFG_PROTECT_CTRL, 1);
5444         rt2x00_set_field32(&reg, MM40_PROT_CFG_PROTECT_NAV_SHORT, 1);
5445         rt2x00_set_field32(&reg, MM40_PROT_CFG_TX_OP_ALLOW_CCK, 0);
5446         rt2x00_set_field32(&reg, MM40_PROT_CFG_TX_OP_ALLOW_OFDM, 1);
5447         rt2x00_set_field32(&reg, MM40_PROT_CFG_TX_OP_ALLOW_MM20, 1);
5448         rt2x00_set_field32(&reg, MM40_PROT_CFG_TX_OP_ALLOW_MM40, 1);
5449         rt2x00_set_field32(&reg, MM40_PROT_CFG_TX_OP_ALLOW_GF20, 1);
5450         rt2x00_set_field32(&reg, MM40_PROT_CFG_TX_OP_ALLOW_GF40, 1);
5451         rt2x00_set_field32(&reg, MM40_PROT_CFG_RTS_TH_EN, 0);
5452         rt2800_register_write(rt2x00dev, MM40_PROT_CFG, reg);
5453
5454         reg = rt2800_register_read(rt2x00dev, GF20_PROT_CFG);
5455         rt2x00_set_field32(&reg, GF20_PROT_CFG_PROTECT_RATE, 0x4004);
5456         rt2x00_set_field32(&reg, GF20_PROT_CFG_PROTECT_CTRL, 1);
5457         rt2x00_set_field32(&reg, GF20_PROT_CFG_PROTECT_NAV_SHORT, 1);
5458         rt2x00_set_field32(&reg, GF20_PROT_CFG_TX_OP_ALLOW_CCK, 0);
5459         rt2x00_set_field32(&reg, GF20_PROT_CFG_TX_OP_ALLOW_OFDM, 1);
5460         rt2x00_set_field32(&reg, GF20_PROT_CFG_TX_OP_ALLOW_MM20, 1);
5461         rt2x00_set_field32(&reg, GF20_PROT_CFG_TX_OP_ALLOW_MM40, 0);
5462         rt2x00_set_field32(&reg, GF20_PROT_CFG_TX_OP_ALLOW_GF20, 1);
5463         rt2x00_set_field32(&reg, GF20_PROT_CFG_TX_OP_ALLOW_GF40, 0);
5464         rt2x00_set_field32(&reg, GF20_PROT_CFG_RTS_TH_EN, 0);
5465         rt2800_register_write(rt2x00dev, GF20_PROT_CFG, reg);
5466
5467         reg = rt2800_register_read(rt2x00dev, GF40_PROT_CFG);
5468         rt2x00_set_field32(&reg, GF40_PROT_CFG_PROTECT_RATE, 0x4084);
5469         rt2x00_set_field32(&reg, GF40_PROT_CFG_PROTECT_CTRL, 1);
5470         rt2x00_set_field32(&reg, GF40_PROT_CFG_PROTECT_NAV_SHORT, 1);
5471         rt2x00_set_field32(&reg, GF40_PROT_CFG_TX_OP_ALLOW_CCK, 0);
5472         rt2x00_set_field32(&reg, GF40_PROT_CFG_TX_OP_ALLOW_OFDM, 1);
5473         rt2x00_set_field32(&reg, GF40_PROT_CFG_TX_OP_ALLOW_MM20, 1);
5474         rt2x00_set_field32(&reg, GF40_PROT_CFG_TX_OP_ALLOW_MM40, 1);
5475         rt2x00_set_field32(&reg, GF40_PROT_CFG_TX_OP_ALLOW_GF20, 1);
5476         rt2x00_set_field32(&reg, GF40_PROT_CFG_TX_OP_ALLOW_GF40, 1);
5477         rt2x00_set_field32(&reg, GF40_PROT_CFG_RTS_TH_EN, 0);
5478         rt2800_register_write(rt2x00dev, GF40_PROT_CFG, reg);
5479
5480         if (rt2x00_is_usb(rt2x00dev)) {
5481                 rt2800_register_write(rt2x00dev, PBF_CFG, 0xf40006);
5482
5483                 reg = rt2800_register_read(rt2x00dev, WPDMA_GLO_CFG);
5484                 rt2x00_set_field32(&reg, WPDMA_GLO_CFG_ENABLE_TX_DMA, 0);
5485                 rt2x00_set_field32(&reg, WPDMA_GLO_CFG_TX_DMA_BUSY, 0);
5486                 rt2x00_set_field32(&reg, WPDMA_GLO_CFG_ENABLE_RX_DMA, 0);
5487                 rt2x00_set_field32(&reg, WPDMA_GLO_CFG_RX_DMA_BUSY, 0);
5488                 rt2x00_set_field32(&reg, WPDMA_GLO_CFG_WP_DMA_BURST_SIZE, 3);
5489                 rt2x00_set_field32(&reg, WPDMA_GLO_CFG_TX_WRITEBACK_DONE, 0);
5490                 rt2x00_set_field32(&reg, WPDMA_GLO_CFG_BIG_ENDIAN, 0);
5491                 rt2x00_set_field32(&reg, WPDMA_GLO_CFG_RX_HDR_SCATTER, 0);
5492                 rt2x00_set_field32(&reg, WPDMA_GLO_CFG_HDR_SEG_LEN, 0);
5493                 rt2800_register_write(rt2x00dev, WPDMA_GLO_CFG, reg);
5494         }
5495
5496         /*
5497          * The legacy driver also sets TXOP_CTRL_CFG_RESERVED_TRUN_EN to 1
5498          * although it is reserved.
5499          */
5500         reg = rt2800_register_read(rt2x00dev, TXOP_CTRL_CFG);
5501         rt2x00_set_field32(&reg, TXOP_CTRL_CFG_TIMEOUT_TRUN_EN, 1);
5502         rt2x00_set_field32(&reg, TXOP_CTRL_CFG_AC_TRUN_EN, 1);
5503         rt2x00_set_field32(&reg, TXOP_CTRL_CFG_TXRATEGRP_TRUN_EN, 1);
5504         rt2x00_set_field32(&reg, TXOP_CTRL_CFG_USER_MODE_TRUN_EN, 1);
5505         rt2x00_set_field32(&reg, TXOP_CTRL_CFG_MIMO_PS_TRUN_EN, 1);
5506         rt2x00_set_field32(&reg, TXOP_CTRL_CFG_RESERVED_TRUN_EN, 1);
5507         rt2x00_set_field32(&reg, TXOP_CTRL_CFG_LSIG_TXOP_EN, 0);
5508         rt2x00_set_field32(&reg, TXOP_CTRL_CFG_EXT_CCA_EN, 0);
5509         rt2x00_set_field32(&reg, TXOP_CTRL_CFG_EXT_CCA_DLY, 88);
5510         rt2x00_set_field32(&reg, TXOP_CTRL_CFG_EXT_CWMIN, 0);
5511         rt2800_register_write(rt2x00dev, TXOP_CTRL_CFG, reg);
5512
5513         reg = rt2x00_rt(rt2x00dev, RT5592) ? 0x00000082 : 0x00000002;
5514         rt2800_register_write(rt2x00dev, TXOP_HLDR_ET, reg);
5515
5516         reg = rt2800_register_read(rt2x00dev, TX_RTS_CFG);
5517         rt2x00_set_field32(&reg, TX_RTS_CFG_AUTO_RTS_RETRY_LIMIT, 7);
5518         rt2x00_set_field32(&reg, TX_RTS_CFG_RTS_THRES,
5519                            IEEE80211_MAX_RTS_THRESHOLD);
5520         rt2x00_set_field32(&reg, TX_RTS_CFG_RTS_FBK_EN, 1);
5521         rt2800_register_write(rt2x00dev, TX_RTS_CFG, reg);
5522
5523         rt2800_register_write(rt2x00dev, EXP_ACK_TIME, 0x002400ca);
5524
5525         /*
5526          * Usually the CCK SIFS time should be set to 10 and the OFDM SIFS
5527          * time should be set to 16. However, the original Ralink driver uses
5528          * 16 for both and indeed using a value of 10 for CCK SIFS results in
5529          * connection problems with 11g + CTS protection. Hence, use the same
5530          * defaults as the Ralink driver: 16 for both, CCK and OFDM SIFS.
5531          */
5532         reg = rt2800_register_read(rt2x00dev, XIFS_TIME_CFG);
5533         rt2x00_set_field32(&reg, XIFS_TIME_CFG_CCKM_SIFS_TIME, 16);
5534         rt2x00_set_field32(&reg, XIFS_TIME_CFG_OFDM_SIFS_TIME, 16);
5535         rt2x00_set_field32(&reg, XIFS_TIME_CFG_OFDM_XIFS_TIME, 4);
5536         rt2x00_set_field32(&reg, XIFS_TIME_CFG_EIFS, 314);
5537         rt2x00_set_field32(&reg, XIFS_TIME_CFG_BB_RXEND_ENABLE, 1);
5538         rt2800_register_write(rt2x00dev, XIFS_TIME_CFG, reg);
5539
5540         rt2800_register_write(rt2x00dev, PWR_PIN_CFG, 0x00000003);
5541
5542         /*
5543          * ASIC will keep garbage value after boot, clear encryption keys.
5544          */
5545         for (i = 0; i < 4; i++)
5546                 rt2800_register_write(rt2x00dev,
5547                                          SHARED_KEY_MODE_ENTRY(i), 0);
5548
5549         for (i = 0; i < 256; i++) {
5550                 rt2800_config_wcid(rt2x00dev, NULL, i);
5551                 rt2800_delete_wcid_attr(rt2x00dev, i);
5552                 rt2800_register_write(rt2x00dev, MAC_IVEIV_ENTRY(i), 0);
5553         }
5554
5555         /*
5556          * Clear all beacons
5557          */
5558         for (i = 0; i < 8; i++)
5559                 rt2800_clear_beacon_register(rt2x00dev, i);
5560
5561         if (rt2x00_is_usb(rt2x00dev)) {
5562                 reg = rt2800_register_read(rt2x00dev, US_CYC_CNT);
5563                 rt2x00_set_field32(&reg, US_CYC_CNT_CLOCK_CYCLE, 30);
5564                 rt2800_register_write(rt2x00dev, US_CYC_CNT, reg);
5565         } else if (rt2x00_is_pcie(rt2x00dev)) {
5566                 reg = rt2800_register_read(rt2x00dev, US_CYC_CNT);
5567                 rt2x00_set_field32(&reg, US_CYC_CNT_CLOCK_CYCLE, 125);
5568                 rt2800_register_write(rt2x00dev, US_CYC_CNT, reg);
5569         }
5570
5571         reg = rt2800_register_read(rt2x00dev, HT_FBK_CFG0);
5572         rt2x00_set_field32(&reg, HT_FBK_CFG0_HTMCS0FBK, 0);
5573         rt2x00_set_field32(&reg, HT_FBK_CFG0_HTMCS1FBK, 0);
5574         rt2x00_set_field32(&reg, HT_FBK_CFG0_HTMCS2FBK, 1);
5575         rt2x00_set_field32(&reg, HT_FBK_CFG0_HTMCS3FBK, 2);
5576         rt2x00_set_field32(&reg, HT_FBK_CFG0_HTMCS4FBK, 3);
5577         rt2x00_set_field32(&reg, HT_FBK_CFG0_HTMCS5FBK, 4);
5578         rt2x00_set_field32(&reg, HT_FBK_CFG0_HTMCS6FBK, 5);
5579         rt2x00_set_field32(&reg, HT_FBK_CFG0_HTMCS7FBK, 6);
5580         rt2800_register_write(rt2x00dev, HT_FBK_CFG0, reg);
5581
5582         reg = rt2800_register_read(rt2x00dev, HT_FBK_CFG1);
5583         rt2x00_set_field32(&reg, HT_FBK_CFG1_HTMCS8FBK, 8);
5584         rt2x00_set_field32(&reg, HT_FBK_CFG1_HTMCS9FBK, 8);
5585         rt2x00_set_field32(&reg, HT_FBK_CFG1_HTMCS10FBK, 9);
5586         rt2x00_set_field32(&reg, HT_FBK_CFG1_HTMCS11FBK, 10);
5587         rt2x00_set_field32(&reg, HT_FBK_CFG1_HTMCS12FBK, 11);
5588         rt2x00_set_field32(&reg, HT_FBK_CFG1_HTMCS13FBK, 12);
5589         rt2x00_set_field32(&reg, HT_FBK_CFG1_HTMCS14FBK, 13);
5590         rt2x00_set_field32(&reg, HT_FBK_CFG1_HTMCS15FBK, 14);
5591         rt2800_register_write(rt2x00dev, HT_FBK_CFG1, reg);
5592
5593         reg = rt2800_register_read(rt2x00dev, LG_FBK_CFG0);
5594         rt2x00_set_field32(&reg, LG_FBK_CFG0_OFDMMCS0FBK, 8);
5595         rt2x00_set_field32(&reg, LG_FBK_CFG0_OFDMMCS1FBK, 8);
5596         rt2x00_set_field32(&reg, LG_FBK_CFG0_OFDMMCS2FBK, 9);
5597         rt2x00_set_field32(&reg, LG_FBK_CFG0_OFDMMCS3FBK, 10);
5598         rt2x00_set_field32(&reg, LG_FBK_CFG0_OFDMMCS4FBK, 11);
5599         rt2x00_set_field32(&reg, LG_FBK_CFG0_OFDMMCS5FBK, 12);
5600         rt2x00_set_field32(&reg, LG_FBK_CFG0_OFDMMCS6FBK, 13);
5601         rt2x00_set_field32(&reg, LG_FBK_CFG0_OFDMMCS7FBK, 14);
5602         rt2800_register_write(rt2x00dev, LG_FBK_CFG0, reg);
5603
5604         reg = rt2800_register_read(rt2x00dev, LG_FBK_CFG1);
5605         rt2x00_set_field32(&reg, LG_FBK_CFG0_CCKMCS0FBK, 0);
5606         rt2x00_set_field32(&reg, LG_FBK_CFG0_CCKMCS1FBK, 0);
5607         rt2x00_set_field32(&reg, LG_FBK_CFG0_CCKMCS2FBK, 1);
5608         rt2x00_set_field32(&reg, LG_FBK_CFG0_CCKMCS3FBK, 2);
5609         rt2800_register_write(rt2x00dev, LG_FBK_CFG1, reg);
5610
5611         /*
5612          * Do not force the BA window size, we use the TXWI to set it
5613          */
5614         reg = rt2800_register_read(rt2x00dev, AMPDU_BA_WINSIZE);
5615         rt2x00_set_field32(&reg, AMPDU_BA_WINSIZE_FORCE_WINSIZE_ENABLE, 0);
5616         rt2x00_set_field32(&reg, AMPDU_BA_WINSIZE_FORCE_WINSIZE, 0);
5617         rt2800_register_write(rt2x00dev, AMPDU_BA_WINSIZE, reg);
5618
5619         /*
5620          * We must clear the error counters.
5621          * These registers are cleared on read,
5622          * so we may pass a useless variable to store the value.
5623          */
5624         reg = rt2800_register_read(rt2x00dev, RX_STA_CNT0);
5625         reg = rt2800_register_read(rt2x00dev, RX_STA_CNT1);
5626         reg = rt2800_register_read(rt2x00dev, RX_STA_CNT2);
5627         reg = rt2800_register_read(rt2x00dev, TX_STA_CNT0);
5628         reg = rt2800_register_read(rt2x00dev, TX_STA_CNT1);
5629         reg = rt2800_register_read(rt2x00dev, TX_STA_CNT2);
5630
5631         /*
5632          * Setup leadtime for pre tbtt interrupt to 6ms
5633          */
5634         reg = rt2800_register_read(rt2x00dev, INT_TIMER_CFG);
5635         rt2x00_set_field32(&reg, INT_TIMER_CFG_PRE_TBTT_TIMER, 6 << 4);
5636         rt2800_register_write(rt2x00dev, INT_TIMER_CFG, reg);
5637
5638         /*
5639          * Set up channel statistics timer
5640          */
5641         reg = rt2800_register_read(rt2x00dev, CH_TIME_CFG);
5642         rt2x00_set_field32(&reg, CH_TIME_CFG_EIFS_BUSY, 1);
5643         rt2x00_set_field32(&reg, CH_TIME_CFG_NAV_BUSY, 1);
5644         rt2x00_set_field32(&reg, CH_TIME_CFG_RX_BUSY, 1);
5645         rt2x00_set_field32(&reg, CH_TIME_CFG_TX_BUSY, 1);
5646         rt2x00_set_field32(&reg, CH_TIME_CFG_TMR_EN, 1);
5647         rt2800_register_write(rt2x00dev, CH_TIME_CFG, reg);
5648
5649         return 0;
5650 }
5651
5652 static int rt2800_wait_bbp_rf_ready(struct rt2x00_dev *rt2x00dev)
5653 {
5654         unsigned int i;
5655         u32 reg;
5656
5657         for (i = 0; i < REGISTER_BUSY_COUNT; i++) {
5658                 reg = rt2800_register_read(rt2x00dev, MAC_STATUS_CFG);
5659                 if (!rt2x00_get_field32(reg, MAC_STATUS_CFG_BBP_RF_BUSY))
5660                         return 0;
5661
5662                 udelay(REGISTER_BUSY_DELAY);
5663         }
5664
5665         rt2x00_err(rt2x00dev, "BBP/RF register access failed, aborting\n");
5666         return -EACCES;
5667 }
5668
5669 static int rt2800_wait_bbp_ready(struct rt2x00_dev *rt2x00dev)
5670 {
5671         unsigned int i;
5672         u8 value;
5673
5674         /*
5675          * BBP was enabled after firmware was loaded,
5676          * but we need to reactivate it now.
5677          */
5678         rt2800_register_write(rt2x00dev, H2M_BBP_AGENT, 0);
5679         rt2800_register_write(rt2x00dev, H2M_MAILBOX_CSR, 0);
5680         msleep(1);
5681
5682         for (i = 0; i < REGISTER_BUSY_COUNT; i++) {
5683                 value = rt2800_bbp_read(rt2x00dev, 0);
5684                 if ((value != 0xff) && (value != 0x00))
5685                         return 0;
5686                 udelay(REGISTER_BUSY_DELAY);
5687         }
5688
5689         rt2x00_err(rt2x00dev, "BBP register access failed, aborting\n");
5690         return -EACCES;
5691 }
5692
5693 static void rt2800_bbp4_mac_if_ctrl(struct rt2x00_dev *rt2x00dev)
5694 {
5695         u8 value;
5696
5697         value = rt2800_bbp_read(rt2x00dev, 4);
5698         rt2x00_set_field8(&value, BBP4_MAC_IF_CTRL, 1);
5699         rt2800_bbp_write(rt2x00dev, 4, value);
5700 }
5701
5702 static void rt2800_init_freq_calibration(struct rt2x00_dev *rt2x00dev)
5703 {
5704         rt2800_bbp_write(rt2x00dev, 142, 1);
5705         rt2800_bbp_write(rt2x00dev, 143, 57);
5706 }
5707
5708 static void rt2800_init_bbp_5592_glrt(struct rt2x00_dev *rt2x00dev)
5709 {
5710         static const u8 glrt_table[] = {
5711                 0xE0, 0x1F, 0X38, 0x32, 0x08, 0x28, 0x19, 0x0A, 0xFF, 0x00, /* 128 ~ 137 */
5712                 0x16, 0x10, 0x10, 0x0B, 0x36, 0x2C, 0x26, 0x24, 0x42, 0x36, /* 138 ~ 147 */
5713                 0x30, 0x2D, 0x4C, 0x46, 0x3D, 0x40, 0x3E, 0x42, 0x3D, 0x40, /* 148 ~ 157 */
5714                 0X3C, 0x34, 0x2C, 0x2F, 0x3C, 0x35, 0x2E, 0x2A, 0x49, 0x41, /* 158 ~ 167 */
5715                 0x36, 0x31, 0x30, 0x30, 0x0E, 0x0D, 0x28, 0x21, 0x1C, 0x16, /* 168 ~ 177 */
5716                 0x50, 0x4A, 0x43, 0x40, 0x10, 0x10, 0x10, 0x10, 0x00, 0x00, /* 178 ~ 187 */
5717                 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* 188 ~ 197 */
5718                 0x00, 0x00, 0x7D, 0x14, 0x32, 0x2C, 0x36, 0x4C, 0x43, 0x2C, /* 198 ~ 207 */
5719                 0x2E, 0x36, 0x30, 0x6E,                                     /* 208 ~ 211 */
5720         };
5721         int i;
5722
5723         for (i = 0; i < ARRAY_SIZE(glrt_table); i++) {
5724                 rt2800_bbp_write(rt2x00dev, 195, 128 + i);
5725                 rt2800_bbp_write(rt2x00dev, 196, glrt_table[i]);
5726         }
5727 };
5728
5729 static void rt2800_init_bbp_early(struct rt2x00_dev *rt2x00dev)
5730 {
5731         rt2800_bbp_write(rt2x00dev, 65, 0x2C);
5732         rt2800_bbp_write(rt2x00dev, 66, 0x38);
5733         rt2800_bbp_write(rt2x00dev, 68, 0x0B);
5734         rt2800_bbp_write(rt2x00dev, 69, 0x12);
5735         rt2800_bbp_write(rt2x00dev, 70, 0x0a);
5736         rt2800_bbp_write(rt2x00dev, 73, 0x10);
5737         rt2800_bbp_write(rt2x00dev, 81, 0x37);
5738         rt2800_bbp_write(rt2x00dev, 82, 0x62);
5739         rt2800_bbp_write(rt2x00dev, 83, 0x6A);
5740         rt2800_bbp_write(rt2x00dev, 84, 0x99);
5741         rt2800_bbp_write(rt2x00dev, 86, 0x00);
5742         rt2800_bbp_write(rt2x00dev, 91, 0x04);
5743         rt2800_bbp_write(rt2x00dev, 92, 0x00);
5744         rt2800_bbp_write(rt2x00dev, 103, 0x00);
5745         rt2800_bbp_write(rt2x00dev, 105, 0x05);
5746         rt2800_bbp_write(rt2x00dev, 106, 0x35);
5747 }
5748
5749 static void rt2800_disable_unused_dac_adc(struct rt2x00_dev *rt2x00dev)
5750 {
5751         u16 eeprom;
5752         u8 value;
5753
5754         value = rt2800_bbp_read(rt2x00dev, 138);
5755         eeprom = rt2800_eeprom_read(rt2x00dev, EEPROM_NIC_CONF0);
5756         if (rt2x00_get_field16(eeprom, EEPROM_NIC_CONF0_TXPATH) == 1)
5757                 value |= 0x20;
5758         if (rt2x00_get_field16(eeprom, EEPROM_NIC_CONF0_RXPATH) == 1)
5759                 value &= ~0x02;
5760         rt2800_bbp_write(rt2x00dev, 138, value);
5761 }
5762
5763 static void rt2800_init_bbp_305x_soc(struct rt2x00_dev *rt2x00dev)
5764 {
5765         rt2800_bbp_write(rt2x00dev, 31, 0x08);
5766
5767         rt2800_bbp_write(rt2x00dev, 65, 0x2c);
5768         rt2800_bbp_write(rt2x00dev, 66, 0x38);
5769
5770         rt2800_bbp_write(rt2x00dev, 69, 0x12);
5771         rt2800_bbp_write(rt2x00dev, 73, 0x10);
5772
5773         rt2800_bbp_write(rt2x00dev, 70, 0x0a);
5774
5775         rt2800_bbp_write(rt2x00dev, 78, 0x0e);
5776         rt2800_bbp_write(rt2x00dev, 80, 0x08);
5777
5778         rt2800_bbp_write(rt2x00dev, 82, 0x62);
5779
5780         rt2800_bbp_write(rt2x00dev, 83, 0x6a);
5781
5782         rt2800_bbp_write(rt2x00dev, 84, 0x99);
5783
5784         rt2800_bbp_write(rt2x00dev, 86, 0x00);
5785
5786         rt2800_bbp_write(rt2x00dev, 91, 0x04);
5787
5788         rt2800_bbp_write(rt2x00dev, 92, 0x00);
5789
5790         rt2800_bbp_write(rt2x00dev, 103, 0xc0);
5791
5792         rt2800_bbp_write(rt2x00dev, 105, 0x01);
5793
5794         rt2800_bbp_write(rt2x00dev, 106, 0x35);
5795 }
5796
5797 static void rt2800_init_bbp_28xx(struct rt2x00_dev *rt2x00dev)
5798 {
5799         rt2800_bbp_write(rt2x00dev, 65, 0x2c);
5800         rt2800_bbp_write(rt2x00dev, 66, 0x38);
5801
5802         if (rt2x00_rt_rev(rt2x00dev, RT2860, REV_RT2860C)) {
5803                 rt2800_bbp_write(rt2x00dev, 69, 0x16);
5804                 rt2800_bbp_write(rt2x00dev, 73, 0x12);
5805         } else {
5806                 rt2800_bbp_write(rt2x00dev, 69, 0x12);
5807                 rt2800_bbp_write(rt2x00dev, 73, 0x10);
5808         }
5809
5810         rt2800_bbp_write(rt2x00dev, 70, 0x0a);
5811
5812         rt2800_bbp_write(rt2x00dev, 81, 0x37);
5813
5814         rt2800_bbp_write(rt2x00dev, 82, 0x62);
5815
5816         rt2800_bbp_write(rt2x00dev, 83, 0x6a);
5817
5818         if (rt2x00_rt_rev(rt2x00dev, RT2860, REV_RT2860D))
5819                 rt2800_bbp_write(rt2x00dev, 84, 0x19);
5820         else
5821                 rt2800_bbp_write(rt2x00dev, 84, 0x99);
5822
5823         rt2800_bbp_write(rt2x00dev, 86, 0x00);
5824
5825         rt2800_bbp_write(rt2x00dev, 91, 0x04);
5826
5827         rt2800_bbp_write(rt2x00dev, 92, 0x00);
5828
5829         rt2800_bbp_write(rt2x00dev, 103, 0x00);
5830
5831         rt2800_bbp_write(rt2x00dev, 105, 0x05);
5832
5833         rt2800_bbp_write(rt2x00dev, 106, 0x35);
5834 }
5835
5836 static void rt2800_init_bbp_30xx(struct rt2x00_dev *rt2x00dev)
5837 {
5838         rt2800_bbp_write(rt2x00dev, 65, 0x2c);
5839         rt2800_bbp_write(rt2x00dev, 66, 0x38);
5840
5841         rt2800_bbp_write(rt2x00dev, 69, 0x12);
5842         rt2800_bbp_write(rt2x00dev, 73, 0x10);
5843
5844         rt2800_bbp_write(rt2x00dev, 70, 0x0a);
5845
5846         rt2800_bbp_write(rt2x00dev, 79, 0x13);
5847         rt2800_bbp_write(rt2x00dev, 80, 0x05);
5848         rt2800_bbp_write(rt2x00dev, 81, 0x33);
5849
5850         rt2800_bbp_write(rt2x00dev, 82, 0x62);
5851
5852         rt2800_bbp_write(rt2x00dev, 83, 0x6a);
5853
5854         rt2800_bbp_write(rt2x00dev, 84, 0x99);
5855
5856         rt2800_bbp_write(rt2x00dev, 86, 0x00);
5857
5858         rt2800_bbp_write(rt2x00dev, 91, 0x04);
5859
5860         rt2800_bbp_write(rt2x00dev, 92, 0x00);
5861
5862         if (rt2x00_rt_rev_gte(rt2x00dev, RT3070, REV_RT3070F) ||
5863             rt2x00_rt_rev_gte(rt2x00dev, RT3071, REV_RT3071E) ||
5864             rt2x00_rt_rev_gte(rt2x00dev, RT3090, REV_RT3090E))
5865                 rt2800_bbp_write(rt2x00dev, 103, 0xc0);
5866         else
5867                 rt2800_bbp_write(rt2x00dev, 103, 0x00);
5868
5869         rt2800_bbp_write(rt2x00dev, 105, 0x05);
5870
5871         rt2800_bbp_write(rt2x00dev, 106, 0x35);
5872
5873         if (rt2x00_rt(rt2x00dev, RT3071) ||
5874             rt2x00_rt(rt2x00dev, RT3090))
5875                 rt2800_disable_unused_dac_adc(rt2x00dev);
5876 }
5877
5878 static void rt2800_init_bbp_3290(struct rt2x00_dev *rt2x00dev)
5879 {
5880         u8 value;
5881
5882         rt2800_bbp4_mac_if_ctrl(rt2x00dev);
5883
5884         rt2800_bbp_write(rt2x00dev, 31, 0x08);
5885
5886         rt2800_bbp_write(rt2x00dev, 65, 0x2c);
5887         rt2800_bbp_write(rt2x00dev, 66, 0x38);
5888
5889         rt2800_bbp_write(rt2x00dev, 68, 0x0b);
5890
5891         rt2800_bbp_write(rt2x00dev, 69, 0x12);
5892         rt2800_bbp_write(rt2x00dev, 73, 0x13);
5893         rt2800_bbp_write(rt2x00dev, 75, 0x46);
5894         rt2800_bbp_write(rt2x00dev, 76, 0x28);
5895
5896         rt2800_bbp_write(rt2x00dev, 77, 0x58);
5897
5898         rt2800_bbp_write(rt2x00dev, 70, 0x0a);
5899
5900         rt2800_bbp_write(rt2x00dev, 74, 0x0b);
5901         rt2800_bbp_write(rt2x00dev, 79, 0x18);
5902         rt2800_bbp_write(rt2x00dev, 80, 0x09);
5903         rt2800_bbp_write(rt2x00dev, 81, 0x33);
5904
5905         rt2800_bbp_write(rt2x00dev, 82, 0x62);
5906
5907         rt2800_bbp_write(rt2x00dev, 83, 0x7a);
5908
5909         rt2800_bbp_write(rt2x00dev, 84, 0x9a);
5910
5911         rt2800_bbp_write(rt2x00dev, 86, 0x38);
5912
5913         rt2800_bbp_write(rt2x00dev, 91, 0x04);
5914
5915         rt2800_bbp_write(rt2x00dev, 92, 0x02);
5916
5917         rt2800_bbp_write(rt2x00dev, 103, 0xc0);
5918
5919         rt2800_bbp_write(rt2x00dev, 104, 0x92);
5920
5921         rt2800_bbp_write(rt2x00dev, 105, 0x1c);
5922
5923         rt2800_bbp_write(rt2x00dev, 106, 0x03);
5924
5925         rt2800_bbp_write(rt2x00dev, 128, 0x12);
5926
5927         rt2800_bbp_write(rt2x00dev, 67, 0x24);
5928         rt2800_bbp_write(rt2x00dev, 143, 0x04);
5929         rt2800_bbp_write(rt2x00dev, 142, 0x99);
5930         rt2800_bbp_write(rt2x00dev, 150, 0x30);
5931         rt2800_bbp_write(rt2x00dev, 151, 0x2e);
5932         rt2800_bbp_write(rt2x00dev, 152, 0x20);
5933         rt2800_bbp_write(rt2x00dev, 153, 0x34);
5934         rt2800_bbp_write(rt2x00dev, 154, 0x40);
5935         rt2800_bbp_write(rt2x00dev, 155, 0x3b);
5936         rt2800_bbp_write(rt2x00dev, 253, 0x04);
5937
5938         value = rt2800_bbp_read(rt2x00dev, 47);
5939         rt2x00_set_field8(&value, BBP47_TSSI_ADC6, 1);
5940         rt2800_bbp_write(rt2x00dev, 47, value);
5941
5942         /* Use 5-bit ADC for Acquisition and 8-bit ADC for data */
5943         value = rt2800_bbp_read(rt2x00dev, 3);
5944         rt2x00_set_field8(&value, BBP3_ADC_MODE_SWITCH, 1);
5945         rt2x00_set_field8(&value, BBP3_ADC_INIT_MODE, 1);
5946         rt2800_bbp_write(rt2x00dev, 3, value);
5947 }
5948
5949 static void rt2800_init_bbp_3352(struct rt2x00_dev *rt2x00dev)
5950 {
5951         rt2800_bbp_write(rt2x00dev, 3, 0x00);
5952         rt2800_bbp_write(rt2x00dev, 4, 0x50);
5953
5954         rt2800_bbp_write(rt2x00dev, 31, 0x08);
5955
5956         rt2800_bbp_write(rt2x00dev, 47, 0x48);
5957
5958         rt2800_bbp_write(rt2x00dev, 65, 0x2c);
5959         rt2800_bbp_write(rt2x00dev, 66, 0x38);
5960
5961         rt2800_bbp_write(rt2x00dev, 68, 0x0b);
5962
5963         rt2800_bbp_write(rt2x00dev, 69, 0x12);
5964         rt2800_bbp_write(rt2x00dev, 73, 0x13);
5965         rt2800_bbp_write(rt2x00dev, 75, 0x46);
5966         rt2800_bbp_write(rt2x00dev, 76, 0x28);
5967
5968         rt2800_bbp_write(rt2x00dev, 77, 0x59);
5969
5970         rt2800_bbp_write(rt2x00dev, 70, 0x0a);
5971
5972         rt2800_bbp_write(rt2x00dev, 78, 0x0e);
5973         rt2800_bbp_write(rt2x00dev, 80, 0x08);
5974         rt2800_bbp_write(rt2x00dev, 81, 0x37);
5975
5976         rt2800_bbp_write(rt2x00dev, 82, 0x62);
5977
5978         if (rt2x00_rt(rt2x00dev, RT5350)) {
5979                 rt2800_bbp_write(rt2x00dev, 83, 0x7a);
5980                 rt2800_bbp_write(rt2x00dev, 84, 0x9a);
5981         } else {
5982                 rt2800_bbp_write(rt2x00dev, 83, 0x6a);
5983                 rt2800_bbp_write(rt2x00dev, 84, 0x99);
5984         }
5985
5986         rt2800_bbp_write(rt2x00dev, 86, 0x38);
5987
5988         rt2800_bbp_write(rt2x00dev, 88, 0x90);
5989
5990         rt2800_bbp_write(rt2x00dev, 91, 0x04);
5991
5992         rt2800_bbp_write(rt2x00dev, 92, 0x02);
5993
5994         rt2800_bbp_write(rt2x00dev, 103, 0xc0);
5995
5996         rt2800_bbp_write(rt2x00dev, 104, 0x92);
5997
5998         if (rt2x00_rt(rt2x00dev, RT5350)) {
5999                 rt2800_bbp_write(rt2x00dev, 105, 0x3c);
6000                 rt2800_bbp_write(rt2x00dev, 106, 0x03);
6001         } else {
6002                 rt2800_bbp_write(rt2x00dev, 105, 0x34);
6003                 rt2800_bbp_write(rt2x00dev, 106, 0x05);
6004         }
6005
6006         rt2800_bbp_write(rt2x00dev, 120, 0x50);
6007
6008         rt2800_bbp_write(rt2x00dev, 137, 0x0f);
6009
6010         rt2800_bbp_write(rt2x00dev, 163, 0xbd);
6011         /* Set ITxBF timeout to 0x9c40=1000msec */
6012         rt2800_bbp_write(rt2x00dev, 179, 0x02);
6013         rt2800_bbp_write(rt2x00dev, 180, 0x00);
6014         rt2800_bbp_write(rt2x00dev, 182, 0x40);
6015         rt2800_bbp_write(rt2x00dev, 180, 0x01);
6016         rt2800_bbp_write(rt2x00dev, 182, 0x9c);
6017         rt2800_bbp_write(rt2x00dev, 179, 0x00);
6018         /* Reprogram the inband interface to put right values in RXWI */
6019         rt2800_bbp_write(rt2x00dev, 142, 0x04);
6020         rt2800_bbp_write(rt2x00dev, 143, 0x3b);
6021         rt2800_bbp_write(rt2x00dev, 142, 0x06);
6022         rt2800_bbp_write(rt2x00dev, 143, 0xa0);
6023         rt2800_bbp_write(rt2x00dev, 142, 0x07);
6024         rt2800_bbp_write(rt2x00dev, 143, 0xa1);
6025         rt2800_bbp_write(rt2x00dev, 142, 0x08);
6026         rt2800_bbp_write(rt2x00dev, 143, 0xa2);
6027
6028         rt2800_bbp_write(rt2x00dev, 148, 0xc8);
6029
6030         if (rt2x00_rt(rt2x00dev, RT5350)) {
6031                 /* Antenna Software OFDM */
6032                 rt2800_bbp_write(rt2x00dev, 150, 0x40);
6033                 /* Antenna Software CCK */
6034                 rt2800_bbp_write(rt2x00dev, 151, 0x30);
6035                 rt2800_bbp_write(rt2x00dev, 152, 0xa3);
6036                 /* Clear previously selected antenna */
6037                 rt2800_bbp_write(rt2x00dev, 154, 0);
6038         }
6039 }
6040
6041 static void rt2800_init_bbp_3390(struct rt2x00_dev *rt2x00dev)
6042 {
6043         rt2800_bbp_write(rt2x00dev, 65, 0x2c);
6044         rt2800_bbp_write(rt2x00dev, 66, 0x38);
6045
6046         rt2800_bbp_write(rt2x00dev, 69, 0x12);
6047         rt2800_bbp_write(rt2x00dev, 73, 0x10);
6048
6049         rt2800_bbp_write(rt2x00dev, 70, 0x0a);
6050
6051         rt2800_bbp_write(rt2x00dev, 79, 0x13);
6052         rt2800_bbp_write(rt2x00dev, 80, 0x05);
6053         rt2800_bbp_write(rt2x00dev, 81, 0x33);
6054
6055         rt2800_bbp_write(rt2x00dev, 82, 0x62);
6056
6057         rt2800_bbp_write(rt2x00dev, 83, 0x6a);
6058
6059         rt2800_bbp_write(rt2x00dev, 84, 0x99);
6060
6061         rt2800_bbp_write(rt2x00dev, 86, 0x00);
6062
6063         rt2800_bbp_write(rt2x00dev, 91, 0x04);
6064
6065         rt2800_bbp_write(rt2x00dev, 92, 0x00);
6066
6067         if (rt2x00_rt_rev_gte(rt2x00dev, RT3390, REV_RT3390E))
6068                 rt2800_bbp_write(rt2x00dev, 103, 0xc0);
6069         else
6070                 rt2800_bbp_write(rt2x00dev, 103, 0x00);
6071
6072         rt2800_bbp_write(rt2x00dev, 105, 0x05);
6073
6074         rt2800_bbp_write(rt2x00dev, 106, 0x35);
6075
6076         rt2800_disable_unused_dac_adc(rt2x00dev);
6077 }
6078
6079 static void rt2800_init_bbp_3572(struct rt2x00_dev *rt2x00dev)
6080 {
6081         rt2800_bbp_write(rt2x00dev, 31, 0x08);
6082
6083         rt2800_bbp_write(rt2x00dev, 65, 0x2c);
6084         rt2800_bbp_write(rt2x00dev, 66, 0x38);
6085
6086         rt2800_bbp_write(rt2x00dev, 69, 0x12);
6087         rt2800_bbp_write(rt2x00dev, 73, 0x10);
6088
6089         rt2800_bbp_write(rt2x00dev, 70, 0x0a);
6090
6091         rt2800_bbp_write(rt2x00dev, 79, 0x13);
6092         rt2800_bbp_write(rt2x00dev, 80, 0x05);
6093         rt2800_bbp_write(rt2x00dev, 81, 0x33);
6094
6095         rt2800_bbp_write(rt2x00dev, 82, 0x62);
6096
6097         rt2800_bbp_write(rt2x00dev, 83, 0x6a);
6098
6099         rt2800_bbp_write(rt2x00dev, 84, 0x99);
6100
6101         rt2800_bbp_write(rt2x00dev, 86, 0x00);
6102
6103         rt2800_bbp_write(rt2x00dev, 91, 0x04);
6104
6105         rt2800_bbp_write(rt2x00dev, 92, 0x00);
6106
6107         rt2800_bbp_write(rt2x00dev, 103, 0xc0);
6108
6109         rt2800_bbp_write(rt2x00dev, 105, 0x05);
6110
6111         rt2800_bbp_write(rt2x00dev, 106, 0x35);
6112
6113         rt2800_disable_unused_dac_adc(rt2x00dev);
6114 }
6115
6116 static void rt2800_init_bbp_3593(struct rt2x00_dev *rt2x00dev)
6117 {
6118         rt2800_init_bbp_early(rt2x00dev);
6119
6120         rt2800_bbp_write(rt2x00dev, 79, 0x13);
6121         rt2800_bbp_write(rt2x00dev, 80, 0x05);
6122         rt2800_bbp_write(rt2x00dev, 81, 0x33);
6123         rt2800_bbp_write(rt2x00dev, 137, 0x0f);
6124
6125         rt2800_bbp_write(rt2x00dev, 84, 0x19);
6126
6127         /* Enable DC filter */
6128         if (rt2x00_rt_rev_gte(rt2x00dev, RT3593, REV_RT3593E))
6129                 rt2800_bbp_write(rt2x00dev, 103, 0xc0);
6130 }
6131
6132 static void rt2800_init_bbp_53xx(struct rt2x00_dev *rt2x00dev)
6133 {
6134         int ant, div_mode;
6135         u16 eeprom;
6136         u8 value;
6137
6138         rt2800_bbp4_mac_if_ctrl(rt2x00dev);
6139
6140         rt2800_bbp_write(rt2x00dev, 31, 0x08);
6141
6142         rt2800_bbp_write(rt2x00dev, 65, 0x2c);
6143         rt2800_bbp_write(rt2x00dev, 66, 0x38);
6144
6145         rt2800_bbp_write(rt2x00dev, 68, 0x0b);
6146
6147         rt2800_bbp_write(rt2x00dev, 69, 0x12);
6148         rt2800_bbp_write(rt2x00dev, 73, 0x13);
6149         rt2800_bbp_write(rt2x00dev, 75, 0x46);
6150         rt2800_bbp_write(rt2x00dev, 76, 0x28);
6151
6152         rt2800_bbp_write(rt2x00dev, 77, 0x59);
6153
6154         rt2800_bbp_write(rt2x00dev, 70, 0x0a);
6155
6156         rt2800_bbp_write(rt2x00dev, 79, 0x13);
6157         rt2800_bbp_write(rt2x00dev, 80, 0x05);
6158         rt2800_bbp_write(rt2x00dev, 81, 0x33);
6159
6160         rt2800_bbp_write(rt2x00dev, 82, 0x62);
6161
6162         rt2800_bbp_write(rt2x00dev, 83, 0x7a);
6163
6164         rt2800_bbp_write(rt2x00dev, 84, 0x9a);
6165
6166         rt2800_bbp_write(rt2x00dev, 86, 0x38);
6167
6168         if (rt2x00_rt(rt2x00dev, RT5392))
6169                 rt2800_bbp_write(rt2x00dev, 88, 0x90);
6170
6171         rt2800_bbp_write(rt2x00dev, 91, 0x04);
6172
6173         rt2800_bbp_write(rt2x00dev, 92, 0x02);
6174
6175         if (rt2x00_rt(rt2x00dev, RT5392)) {
6176                 rt2800_bbp_write(rt2x00dev, 95, 0x9a);
6177                 rt2800_bbp_write(rt2x00dev, 98, 0x12);
6178         }
6179
6180         rt2800_bbp_write(rt2x00dev, 103, 0xc0);
6181
6182         rt2800_bbp_write(rt2x00dev, 104, 0x92);
6183
6184         rt2800_bbp_write(rt2x00dev, 105, 0x3c);
6185
6186         if (rt2x00_rt(rt2x00dev, RT5390))
6187                 rt2800_bbp_write(rt2x00dev, 106, 0x03);
6188         else if (rt2x00_rt(rt2x00dev, RT5392))
6189                 rt2800_bbp_write(rt2x00dev, 106, 0x12);
6190         else
6191                 WARN_ON(1);
6192
6193         rt2800_bbp_write(rt2x00dev, 128, 0x12);
6194
6195         if (rt2x00_rt(rt2x00dev, RT5392)) {
6196                 rt2800_bbp_write(rt2x00dev, 134, 0xd0);
6197                 rt2800_bbp_write(rt2x00dev, 135, 0xf6);
6198         }
6199
6200         rt2800_disable_unused_dac_adc(rt2x00dev);
6201
6202         eeprom = rt2800_eeprom_read(rt2x00dev, EEPROM_NIC_CONF1);
6203         div_mode = rt2x00_get_field16(eeprom,
6204                                       EEPROM_NIC_CONF1_ANT_DIVERSITY);
6205         ant = (div_mode == 3) ? 1 : 0;
6206
6207         /* check if this is a Bluetooth combo card */
6208         if (rt2x00_has_cap_bt_coexist(rt2x00dev)) {
6209                 u32 reg;
6210
6211                 reg = rt2800_register_read(rt2x00dev, GPIO_CTRL);
6212                 rt2x00_set_field32(&reg, GPIO_CTRL_DIR3, 0);
6213                 rt2x00_set_field32(&reg, GPIO_CTRL_DIR6, 0);
6214                 rt2x00_set_field32(&reg, GPIO_CTRL_VAL3, 0);
6215                 rt2x00_set_field32(&reg, GPIO_CTRL_VAL6, 0);
6216                 if (ant == 0)
6217                         rt2x00_set_field32(&reg, GPIO_CTRL_VAL3, 1);
6218                 else if (ant == 1)
6219                         rt2x00_set_field32(&reg, GPIO_CTRL_VAL6, 1);
6220                 rt2800_register_write(rt2x00dev, GPIO_CTRL, reg);
6221         }
6222
6223         /* This chip has hardware antenna diversity*/
6224         if (rt2x00_rt_rev_gte(rt2x00dev, RT5390, REV_RT5390R)) {
6225                 rt2800_bbp_write(rt2x00dev, 150, 0); /* Disable Antenna Software OFDM */
6226                 rt2800_bbp_write(rt2x00dev, 151, 0); /* Disable Antenna Software CCK */
6227                 rt2800_bbp_write(rt2x00dev, 154, 0); /* Clear previously selected antenna */
6228         }
6229
6230         value = rt2800_bbp_read(rt2x00dev, 152);
6231         if (ant == 0)
6232                 rt2x00_set_field8(&value, BBP152_RX_DEFAULT_ANT, 1);
6233         else
6234                 rt2x00_set_field8(&value, BBP152_RX_DEFAULT_ANT, 0);
6235         rt2800_bbp_write(rt2x00dev, 152, value);
6236
6237         rt2800_init_freq_calibration(rt2x00dev);
6238 }
6239
6240 static void rt2800_init_bbp_5592(struct rt2x00_dev *rt2x00dev)
6241 {
6242         int ant, div_mode;
6243         u16 eeprom;
6244         u8 value;
6245
6246         rt2800_init_bbp_early(rt2x00dev);
6247
6248         value = rt2800_bbp_read(rt2x00dev, 105);
6249         rt2x00_set_field8(&value, BBP105_MLD,
6250                           rt2x00dev->default_ant.rx_chain_num == 2);
6251         rt2800_bbp_write(rt2x00dev, 105, value);
6252
6253         rt2800_bbp4_mac_if_ctrl(rt2x00dev);
6254
6255         rt2800_bbp_write(rt2x00dev, 20, 0x06);
6256         rt2800_bbp_write(rt2x00dev, 31, 0x08);
6257         rt2800_bbp_write(rt2x00dev, 65, 0x2C);
6258         rt2800_bbp_write(rt2x00dev, 68, 0xDD);
6259         rt2800_bbp_write(rt2x00dev, 69, 0x1A);
6260         rt2800_bbp_write(rt2x00dev, 70, 0x05);
6261         rt2800_bbp_write(rt2x00dev, 73, 0x13);
6262         rt2800_bbp_write(rt2x00dev, 74, 0x0F);
6263         rt2800_bbp_write(rt2x00dev, 75, 0x4F);
6264         rt2800_bbp_write(rt2x00dev, 76, 0x28);
6265         rt2800_bbp_write(rt2x00dev, 77, 0x59);
6266         rt2800_bbp_write(rt2x00dev, 84, 0x9A);
6267         rt2800_bbp_write(rt2x00dev, 86, 0x38);
6268         rt2800_bbp_write(rt2x00dev, 88, 0x90);
6269         rt2800_bbp_write(rt2x00dev, 91, 0x04);
6270         rt2800_bbp_write(rt2x00dev, 92, 0x02);
6271         rt2800_bbp_write(rt2x00dev, 95, 0x9a);
6272         rt2800_bbp_write(rt2x00dev, 98, 0x12);
6273         rt2800_bbp_write(rt2x00dev, 103, 0xC0);
6274         rt2800_bbp_write(rt2x00dev, 104, 0x92);
6275         /* FIXME BBP105 owerwrite */
6276         rt2800_bbp_write(rt2x00dev, 105, 0x3C);
6277         rt2800_bbp_write(rt2x00dev, 106, 0x35);
6278         rt2800_bbp_write(rt2x00dev, 128, 0x12);
6279         rt2800_bbp_write(rt2x00dev, 134, 0xD0);
6280         rt2800_bbp_write(rt2x00dev, 135, 0xF6);
6281         rt2800_bbp_write(rt2x00dev, 137, 0x0F);
6282
6283         /* Initialize GLRT (Generalized Likehood Radio Test) */
6284         rt2800_init_bbp_5592_glrt(rt2x00dev);
6285
6286         rt2800_bbp4_mac_if_ctrl(rt2x00dev);
6287
6288         eeprom = rt2800_eeprom_read(rt2x00dev, EEPROM_NIC_CONF1);
6289         div_mode = rt2x00_get_field16(eeprom, EEPROM_NIC_CONF1_ANT_DIVERSITY);
6290         ant = (div_mode == 3) ? 1 : 0;
6291         value = rt2800_bbp_read(rt2x00dev, 152);
6292         if (ant == 0) {
6293                 /* Main antenna */
6294                 rt2x00_set_field8(&value, BBP152_RX_DEFAULT_ANT, 1);
6295         } else {
6296                 /* Auxiliary antenna */
6297                 rt2x00_set_field8(&value, BBP152_RX_DEFAULT_ANT, 0);
6298         }
6299         rt2800_bbp_write(rt2x00dev, 152, value);
6300
6301         if (rt2x00_rt_rev_gte(rt2x00dev, RT5592, REV_RT5592C)) {
6302                 value = rt2800_bbp_read(rt2x00dev, 254);
6303                 rt2x00_set_field8(&value, BBP254_BIT7, 1);
6304                 rt2800_bbp_write(rt2x00dev, 254, value);
6305         }
6306
6307         rt2800_init_freq_calibration(rt2x00dev);
6308
6309         rt2800_bbp_write(rt2x00dev, 84, 0x19);
6310         if (rt2x00_rt_rev_gte(rt2x00dev, RT5592, REV_RT5592C))
6311                 rt2800_bbp_write(rt2x00dev, 103, 0xc0);
6312 }
6313
6314 static void rt2800_bbp_glrt_write(struct rt2x00_dev *rt2x00dev,
6315                                   const u8 reg, const u8 value)
6316 {
6317         rt2800_bbp_write(rt2x00dev, 195, reg);
6318         rt2800_bbp_write(rt2x00dev, 196, value);
6319 }
6320
6321 static void rt2800_bbp_dcoc_write(struct rt2x00_dev *rt2x00dev,
6322                                   const u8 reg, const u8 value)
6323 {
6324         rt2800_bbp_write(rt2x00dev, 158, reg);
6325         rt2800_bbp_write(rt2x00dev, 159, value);
6326 }
6327
6328 static u8 rt2800_bbp_dcoc_read(struct rt2x00_dev *rt2x00dev, const u8 reg)
6329 {
6330         rt2800_bbp_write(rt2x00dev, 158, reg);
6331         return rt2800_bbp_read(rt2x00dev, 159);
6332 }
6333
6334 static void rt2800_init_bbp_6352(struct rt2x00_dev *rt2x00dev)
6335 {
6336         u8 bbp;
6337
6338         /* Apply Maximum Likelihood Detection (MLD) for 2 stream case */
6339         bbp = rt2800_bbp_read(rt2x00dev, 105);
6340         rt2x00_set_field8(&bbp, BBP105_MLD,
6341                           rt2x00dev->default_ant.rx_chain_num == 2);
6342         rt2800_bbp_write(rt2x00dev, 105, bbp);
6343
6344         /* Avoid data loss and CRC errors */
6345         rt2800_bbp4_mac_if_ctrl(rt2x00dev);
6346
6347         /* Fix I/Q swap issue */
6348         bbp = rt2800_bbp_read(rt2x00dev, 1);
6349         bbp |= 0x04;
6350         rt2800_bbp_write(rt2x00dev, 1, bbp);
6351
6352         /* BBP for G band */
6353         rt2800_bbp_write(rt2x00dev, 3, 0x08);
6354         rt2800_bbp_write(rt2x00dev, 4, 0x00); /* rt2800_bbp4_mac_if_ctrl? */
6355         rt2800_bbp_write(rt2x00dev, 6, 0x08);
6356         rt2800_bbp_write(rt2x00dev, 14, 0x09);
6357         rt2800_bbp_write(rt2x00dev, 15, 0xFF);
6358         rt2800_bbp_write(rt2x00dev, 16, 0x01);
6359         rt2800_bbp_write(rt2x00dev, 20, 0x06);
6360         rt2800_bbp_write(rt2x00dev, 21, 0x00);
6361         rt2800_bbp_write(rt2x00dev, 22, 0x00);
6362         rt2800_bbp_write(rt2x00dev, 27, 0x00);
6363         rt2800_bbp_write(rt2x00dev, 28, 0x00);
6364         rt2800_bbp_write(rt2x00dev, 30, 0x00);
6365         rt2800_bbp_write(rt2x00dev, 31, 0x48);
6366         rt2800_bbp_write(rt2x00dev, 47, 0x40);
6367         rt2800_bbp_write(rt2x00dev, 62, 0x00);
6368         rt2800_bbp_write(rt2x00dev, 63, 0x00);
6369         rt2800_bbp_write(rt2x00dev, 64, 0x00);
6370         rt2800_bbp_write(rt2x00dev, 65, 0x2C);
6371         rt2800_bbp_write(rt2x00dev, 66, 0x1C);
6372         rt2800_bbp_write(rt2x00dev, 67, 0x20);
6373         rt2800_bbp_write(rt2x00dev, 68, 0xDD);
6374         rt2800_bbp_write(rt2x00dev, 69, 0x10);
6375         rt2800_bbp_write(rt2x00dev, 70, 0x05);
6376         rt2800_bbp_write(rt2x00dev, 73, 0x18);
6377         rt2800_bbp_write(rt2x00dev, 74, 0x0F);
6378         rt2800_bbp_write(rt2x00dev, 75, 0x60);
6379         rt2800_bbp_write(rt2x00dev, 76, 0x44);
6380         rt2800_bbp_write(rt2x00dev, 77, 0x59);
6381         rt2800_bbp_write(rt2x00dev, 78, 0x1E);
6382         rt2800_bbp_write(rt2x00dev, 79, 0x1C);
6383         rt2800_bbp_write(rt2x00dev, 80, 0x0C);
6384         rt2800_bbp_write(rt2x00dev, 81, 0x3A);
6385         rt2800_bbp_write(rt2x00dev, 82, 0xB6);
6386         rt2800_bbp_write(rt2x00dev, 83, 0x9A);
6387         rt2800_bbp_write(rt2x00dev, 84, 0x9A);
6388         rt2800_bbp_write(rt2x00dev, 86, 0x38);
6389         rt2800_bbp_write(rt2x00dev, 88, 0x90);
6390         rt2800_bbp_write(rt2x00dev, 91, 0x04);
6391         rt2800_bbp_write(rt2x00dev, 92, 0x02);
6392         rt2800_bbp_write(rt2x00dev, 95, 0x9A);
6393         rt2800_bbp_write(rt2x00dev, 96, 0x00);
6394         rt2800_bbp_write(rt2x00dev, 103, 0xC0);
6395         rt2800_bbp_write(rt2x00dev, 104, 0x92);
6396         /* FIXME BBP105 owerwrite */
6397         rt2800_bbp_write(rt2x00dev, 105, 0x3C);
6398         rt2800_bbp_write(rt2x00dev, 106, 0x12);
6399         rt2800_bbp_write(rt2x00dev, 109, 0x00);
6400         rt2800_bbp_write(rt2x00dev, 134, 0x10);
6401         rt2800_bbp_write(rt2x00dev, 135, 0xA6);
6402         rt2800_bbp_write(rt2x00dev, 137, 0x04);
6403         rt2800_bbp_write(rt2x00dev, 142, 0x30);
6404         rt2800_bbp_write(rt2x00dev, 143, 0xF7);
6405         rt2800_bbp_write(rt2x00dev, 160, 0xEC);
6406         rt2800_bbp_write(rt2x00dev, 161, 0xC4);
6407         rt2800_bbp_write(rt2x00dev, 162, 0x77);
6408         rt2800_bbp_write(rt2x00dev, 163, 0xF9);
6409         rt2800_bbp_write(rt2x00dev, 164, 0x00);
6410         rt2800_bbp_write(rt2x00dev, 165, 0x00);
6411         rt2800_bbp_write(rt2x00dev, 186, 0x00);
6412         rt2800_bbp_write(rt2x00dev, 187, 0x00);
6413         rt2800_bbp_write(rt2x00dev, 188, 0x00);
6414         rt2800_bbp_write(rt2x00dev, 186, 0x00);
6415         rt2800_bbp_write(rt2x00dev, 187, 0x01);
6416         rt2800_bbp_write(rt2x00dev, 188, 0x00);
6417         rt2800_bbp_write(rt2x00dev, 189, 0x00);
6418
6419         rt2800_bbp_write(rt2x00dev, 91, 0x06);
6420         rt2800_bbp_write(rt2x00dev, 92, 0x04);
6421         rt2800_bbp_write(rt2x00dev, 93, 0x54);
6422         rt2800_bbp_write(rt2x00dev, 99, 0x50);
6423         rt2800_bbp_write(rt2x00dev, 148, 0x84);
6424         rt2800_bbp_write(rt2x00dev, 167, 0x80);
6425         rt2800_bbp_write(rt2x00dev, 178, 0xFF);
6426         rt2800_bbp_write(rt2x00dev, 106, 0x13);
6427
6428         /* BBP for G band GLRT function (BBP_128 ~ BBP_221) */
6429         rt2800_bbp_glrt_write(rt2x00dev, 0, 0x00);
6430         rt2800_bbp_glrt_write(rt2x00dev, 1, 0x14);
6431         rt2800_bbp_glrt_write(rt2x00dev, 2, 0x20);
6432         rt2800_bbp_glrt_write(rt2x00dev, 3, 0x0A);
6433         rt2800_bbp_glrt_write(rt2x00dev, 10, 0x16);
6434         rt2800_bbp_glrt_write(rt2x00dev, 11, 0x06);
6435         rt2800_bbp_glrt_write(rt2x00dev, 12, 0x02);
6436         rt2800_bbp_glrt_write(rt2x00dev, 13, 0x07);
6437         rt2800_bbp_glrt_write(rt2x00dev, 14, 0x05);
6438         rt2800_bbp_glrt_write(rt2x00dev, 15, 0x09);
6439         rt2800_bbp_glrt_write(rt2x00dev, 16, 0x20);
6440         rt2800_bbp_glrt_write(rt2x00dev, 17, 0x08);
6441         rt2800_bbp_glrt_write(rt2x00dev, 18, 0x4A);
6442         rt2800_bbp_glrt_write(rt2x00dev, 19, 0x00);
6443         rt2800_bbp_glrt_write(rt2x00dev, 20, 0x00);
6444         rt2800_bbp_glrt_write(rt2x00dev, 128, 0xE0);
6445         rt2800_bbp_glrt_write(rt2x00dev, 129, 0x1F);
6446         rt2800_bbp_glrt_write(rt2x00dev, 130, 0x4F);
6447         rt2800_bbp_glrt_write(rt2x00dev, 131, 0x32);
6448         rt2800_bbp_glrt_write(rt2x00dev, 132, 0x08);
6449         rt2800_bbp_glrt_write(rt2x00dev, 133, 0x28);
6450         rt2800_bbp_glrt_write(rt2x00dev, 134, 0x19);
6451         rt2800_bbp_glrt_write(rt2x00dev, 135, 0x0A);
6452         rt2800_bbp_glrt_write(rt2x00dev, 138, 0x16);
6453         rt2800_bbp_glrt_write(rt2x00dev, 139, 0x10);
6454         rt2800_bbp_glrt_write(rt2x00dev, 140, 0x10);
6455         rt2800_bbp_glrt_write(rt2x00dev, 141, 0x1A);
6456         rt2800_bbp_glrt_write(rt2x00dev, 142, 0x36);
6457         rt2800_bbp_glrt_write(rt2x00dev, 143, 0x2C);
6458         rt2800_bbp_glrt_write(rt2x00dev, 144, 0x26);
6459         rt2800_bbp_glrt_write(rt2x00dev, 145, 0x24);
6460         rt2800_bbp_glrt_write(rt2x00dev, 146, 0x42);
6461         rt2800_bbp_glrt_write(rt2x00dev, 147, 0x40);
6462         rt2800_bbp_glrt_write(rt2x00dev, 148, 0x30);
6463         rt2800_bbp_glrt_write(rt2x00dev, 149, 0x29);
6464         rt2800_bbp_glrt_write(rt2x00dev, 150, 0x4C);
6465         rt2800_bbp_glrt_write(rt2x00dev, 151, 0x46);
6466         rt2800_bbp_glrt_write(rt2x00dev, 152, 0x3D);
6467         rt2800_bbp_glrt_write(rt2x00dev, 153, 0x40);
6468         rt2800_bbp_glrt_write(rt2x00dev, 154, 0x3E);
6469         rt2800_bbp_glrt_write(rt2x00dev, 155, 0x38);
6470         rt2800_bbp_glrt_write(rt2x00dev, 156, 0x3D);
6471         rt2800_bbp_glrt_write(rt2x00dev, 157, 0x2F);
6472         rt2800_bbp_glrt_write(rt2x00dev, 158, 0x3C);
6473         rt2800_bbp_glrt_write(rt2x00dev, 159, 0x34);
6474         rt2800_bbp_glrt_write(rt2x00dev, 160, 0x2C);
6475         rt2800_bbp_glrt_write(rt2x00dev, 161, 0x2F);
6476         rt2800_bbp_glrt_write(rt2x00dev, 162, 0x3C);
6477         rt2800_bbp_glrt_write(rt2x00dev, 163, 0x35);
6478         rt2800_bbp_glrt_write(rt2x00dev, 164, 0x2E);
6479         rt2800_bbp_glrt_write(rt2x00dev, 165, 0x2F);
6480         rt2800_bbp_glrt_write(rt2x00dev, 166, 0x49);
6481         rt2800_bbp_glrt_write(rt2x00dev, 167, 0x41);
6482         rt2800_bbp_glrt_write(rt2x00dev, 168, 0x36);
6483         rt2800_bbp_glrt_write(rt2x00dev, 169, 0x39);
6484         rt2800_bbp_glrt_write(rt2x00dev, 170, 0x30);
6485         rt2800_bbp_glrt_write(rt2x00dev, 171, 0x30);
6486         rt2800_bbp_glrt_write(rt2x00dev, 172, 0x0E);
6487         rt2800_bbp_glrt_write(rt2x00dev, 173, 0x0D);
6488         rt2800_bbp_glrt_write(rt2x00dev, 174, 0x28);
6489         rt2800_bbp_glrt_write(rt2x00dev, 175, 0x21);
6490         rt2800_bbp_glrt_write(rt2x00dev, 176, 0x1C);
6491         rt2800_bbp_glrt_write(rt2x00dev, 177, 0x16);
6492         rt2800_bbp_glrt_write(rt2x00dev, 178, 0x50);
6493         rt2800_bbp_glrt_write(rt2x00dev, 179, 0x4A);
6494         rt2800_bbp_glrt_write(rt2x00dev, 180, 0x43);
6495         rt2800_bbp_glrt_write(rt2x00dev, 181, 0x50);
6496         rt2800_bbp_glrt_write(rt2x00dev, 182, 0x10);
6497         rt2800_bbp_glrt_write(rt2x00dev, 183, 0x10);
6498         rt2800_bbp_glrt_write(rt2x00dev, 184, 0x10);
6499         rt2800_bbp_glrt_write(rt2x00dev, 185, 0x10);
6500         rt2800_bbp_glrt_write(rt2x00dev, 200, 0x7D);
6501         rt2800_bbp_glrt_write(rt2x00dev, 201, 0x14);
6502         rt2800_bbp_glrt_write(rt2x00dev, 202, 0x32);
6503         rt2800_bbp_glrt_write(rt2x00dev, 203, 0x2C);
6504         rt2800_bbp_glrt_write(rt2x00dev, 204, 0x36);
6505         rt2800_bbp_glrt_write(rt2x00dev, 205, 0x4C);
6506         rt2800_bbp_glrt_write(rt2x00dev, 206, 0x43);
6507         rt2800_bbp_glrt_write(rt2x00dev, 207, 0x2C);
6508         rt2800_bbp_glrt_write(rt2x00dev, 208, 0x2E);
6509         rt2800_bbp_glrt_write(rt2x00dev, 209, 0x36);
6510         rt2800_bbp_glrt_write(rt2x00dev, 210, 0x30);
6511         rt2800_bbp_glrt_write(rt2x00dev, 211, 0x6E);
6512
6513         /* BBP for G band DCOC function */
6514         rt2800_bbp_dcoc_write(rt2x00dev, 140, 0x0C);
6515         rt2800_bbp_dcoc_write(rt2x00dev, 141, 0x00);
6516         rt2800_bbp_dcoc_write(rt2x00dev, 142, 0x10);
6517         rt2800_bbp_dcoc_write(rt2x00dev, 143, 0x10);
6518         rt2800_bbp_dcoc_write(rt2x00dev, 144, 0x10);
6519         rt2800_bbp_dcoc_write(rt2x00dev, 145, 0x10);
6520         rt2800_bbp_dcoc_write(rt2x00dev, 146, 0x08);
6521         rt2800_bbp_dcoc_write(rt2x00dev, 147, 0x40);
6522         rt2800_bbp_dcoc_write(rt2x00dev, 148, 0x04);
6523         rt2800_bbp_dcoc_write(rt2x00dev, 149, 0x04);
6524         rt2800_bbp_dcoc_write(rt2x00dev, 150, 0x08);
6525         rt2800_bbp_dcoc_write(rt2x00dev, 151, 0x08);
6526         rt2800_bbp_dcoc_write(rt2x00dev, 152, 0x03);
6527         rt2800_bbp_dcoc_write(rt2x00dev, 153, 0x03);
6528         rt2800_bbp_dcoc_write(rt2x00dev, 154, 0x03);
6529         rt2800_bbp_dcoc_write(rt2x00dev, 155, 0x02);
6530         rt2800_bbp_dcoc_write(rt2x00dev, 156, 0x40);
6531         rt2800_bbp_dcoc_write(rt2x00dev, 157, 0x40);
6532         rt2800_bbp_dcoc_write(rt2x00dev, 158, 0x64);
6533         rt2800_bbp_dcoc_write(rt2x00dev, 159, 0x64);
6534
6535         rt2800_bbp4_mac_if_ctrl(rt2x00dev);
6536 }
6537
6538 static void rt2800_init_bbp(struct rt2x00_dev *rt2x00dev)
6539 {
6540         unsigned int i;
6541         u16 eeprom;
6542         u8 reg_id;
6543         u8 value;
6544
6545         if (rt2800_is_305x_soc(rt2x00dev))
6546                 rt2800_init_bbp_305x_soc(rt2x00dev);
6547
6548         switch (rt2x00dev->chip.rt) {
6549         case RT2860:
6550         case RT2872:
6551         case RT2883:
6552                 rt2800_init_bbp_28xx(rt2x00dev);
6553                 break;
6554         case RT3070:
6555         case RT3071:
6556         case RT3090:
6557                 rt2800_init_bbp_30xx(rt2x00dev);
6558                 break;
6559         case RT3290:
6560                 rt2800_init_bbp_3290(rt2x00dev);
6561                 break;
6562         case RT3352:
6563         case RT5350:
6564                 rt2800_init_bbp_3352(rt2x00dev);
6565                 break;
6566         case RT3390:
6567                 rt2800_init_bbp_3390(rt2x00dev);
6568                 break;
6569         case RT3572:
6570                 rt2800_init_bbp_3572(rt2x00dev);
6571                 break;
6572         case RT3593:
6573                 rt2800_init_bbp_3593(rt2x00dev);
6574                 return;
6575         case RT5390:
6576         case RT5392:
6577                 rt2800_init_bbp_53xx(rt2x00dev);
6578                 break;
6579         case RT5592:
6580                 rt2800_init_bbp_5592(rt2x00dev);
6581                 return;
6582         case RT6352:
6583                 rt2800_init_bbp_6352(rt2x00dev);
6584                 break;
6585         }
6586
6587         for (i = 0; i < EEPROM_BBP_SIZE; i++) {
6588                 eeprom = rt2800_eeprom_read_from_array(rt2x00dev,
6589                                                        EEPROM_BBP_START, i);
6590
6591                 if (eeprom != 0xffff && eeprom != 0x0000) {
6592                         reg_id = rt2x00_get_field16(eeprom, EEPROM_BBP_REG_ID);
6593                         value = rt2x00_get_field16(eeprom, EEPROM_BBP_VALUE);
6594                         rt2800_bbp_write(rt2x00dev, reg_id, value);
6595                 }
6596         }
6597 }
6598
6599 static void rt2800_led_open_drain_enable(struct rt2x00_dev *rt2x00dev)
6600 {
6601         u32 reg;
6602
6603         reg = rt2800_register_read(rt2x00dev, OPT_14_CSR);
6604         rt2x00_set_field32(&reg, OPT_14_CSR_BIT0, 1);
6605         rt2800_register_write(rt2x00dev, OPT_14_CSR, reg);
6606 }
6607
6608 static u8 rt2800_init_rx_filter(struct rt2x00_dev *rt2x00dev, bool bw40,
6609                                 u8 filter_target)
6610 {
6611         unsigned int i;
6612         u8 bbp;
6613         u8 rfcsr;
6614         u8 passband;
6615         u8 stopband;
6616         u8 overtuned = 0;
6617         u8 rfcsr24 = (bw40) ? 0x27 : 0x07;
6618
6619         rt2800_rfcsr_write(rt2x00dev, 24, rfcsr24);
6620
6621         bbp = rt2800_bbp_read(rt2x00dev, 4);
6622         rt2x00_set_field8(&bbp, BBP4_BANDWIDTH, 2 * bw40);
6623         rt2800_bbp_write(rt2x00dev, 4, bbp);
6624
6625         rfcsr = rt2800_rfcsr_read(rt2x00dev, 31);
6626         rt2x00_set_field8(&rfcsr, RFCSR31_RX_H20M, bw40);
6627         rt2800_rfcsr_write(rt2x00dev, 31, rfcsr);
6628
6629         rfcsr = rt2800_rfcsr_read(rt2x00dev, 22);
6630         rt2x00_set_field8(&rfcsr, RFCSR22_BASEBAND_LOOPBACK, 1);
6631         rt2800_rfcsr_write(rt2x00dev, 22, rfcsr);
6632
6633         /*
6634          * Set power & frequency of passband test tone
6635          */
6636         rt2800_bbp_write(rt2x00dev, 24, 0);
6637
6638         for (i = 0; i < 100; i++) {
6639                 rt2800_bbp_write(rt2x00dev, 25, 0x90);
6640                 msleep(1);
6641
6642                 passband = rt2800_bbp_read(rt2x00dev, 55);
6643                 if (passband)
6644                         break;
6645         }
6646
6647         /*
6648          * Set power & frequency of stopband test tone
6649          */
6650         rt2800_bbp_write(rt2x00dev, 24, 0x06);
6651
6652         for (i = 0; i < 100; i++) {
6653                 rt2800_bbp_write(rt2x00dev, 25, 0x90);
6654                 msleep(1);
6655
6656                 stopband = rt2800_bbp_read(rt2x00dev, 55);
6657
6658                 if ((passband - stopband) <= filter_target) {
6659                         rfcsr24++;
6660                         overtuned += ((passband - stopband) == filter_target);
6661                 } else
6662                         break;
6663
6664                 rt2800_rfcsr_write(rt2x00dev, 24, rfcsr24);
6665         }
6666
6667         rfcsr24 -= !!overtuned;
6668
6669         rt2800_rfcsr_write(rt2x00dev, 24, rfcsr24);
6670         return rfcsr24;
6671 }
6672
6673 static void rt2800_rf_init_calibration(struct rt2x00_dev *rt2x00dev,
6674                                        const unsigned int rf_reg)
6675 {
6676         u8 rfcsr;
6677
6678         rfcsr = rt2800_rfcsr_read(rt2x00dev, rf_reg);
6679         rt2x00_set_field8(&rfcsr, FIELD8(0x80), 1);
6680         rt2800_rfcsr_write(rt2x00dev, rf_reg, rfcsr);
6681         msleep(1);
6682         rt2x00_set_field8(&rfcsr, FIELD8(0x80), 0);
6683         rt2800_rfcsr_write(rt2x00dev, rf_reg, rfcsr);
6684 }
6685
6686 static void rt2800_rx_filter_calibration(struct rt2x00_dev *rt2x00dev)
6687 {
6688         struct rt2800_drv_data *drv_data = rt2x00dev->drv_data;
6689         u8 filter_tgt_bw20;
6690         u8 filter_tgt_bw40;
6691         u8 rfcsr, bbp;
6692
6693         /*
6694          * TODO: sync filter_tgt values with vendor driver
6695          */
6696         if (rt2x00_rt(rt2x00dev, RT3070)) {
6697                 filter_tgt_bw20 = 0x16;
6698                 filter_tgt_bw40 = 0x19;
6699         } else {
6700                 filter_tgt_bw20 = 0x13;
6701                 filter_tgt_bw40 = 0x15;
6702         }
6703
6704         drv_data->calibration_bw20 =
6705                 rt2800_init_rx_filter(rt2x00dev, false, filter_tgt_bw20);
6706         drv_data->calibration_bw40 =
6707                 rt2800_init_rx_filter(rt2x00dev, true, filter_tgt_bw40);
6708
6709         /*
6710          * Save BBP 25 & 26 values for later use in channel switching (for 3052)
6711          */
6712         drv_data->bbp25 = rt2800_bbp_read(rt2x00dev, 25);
6713         drv_data->bbp26 = rt2800_bbp_read(rt2x00dev, 26);
6714
6715         /*
6716          * Set back to initial state
6717          */
6718         rt2800_bbp_write(rt2x00dev, 24, 0);
6719
6720         rfcsr = rt2800_rfcsr_read(rt2x00dev, 22);
6721         rt2x00_set_field8(&rfcsr, RFCSR22_BASEBAND_LOOPBACK, 0);
6722         rt2800_rfcsr_write(rt2x00dev, 22, rfcsr);
6723
6724         /*
6725          * Set BBP back to BW20
6726          */
6727         bbp = rt2800_bbp_read(rt2x00dev, 4);
6728         rt2x00_set_field8(&bbp, BBP4_BANDWIDTH, 0);
6729         rt2800_bbp_write(rt2x00dev, 4, bbp);
6730 }
6731
6732 static void rt2800_normal_mode_setup_3xxx(struct rt2x00_dev *rt2x00dev)
6733 {
6734         struct rt2800_drv_data *drv_data = rt2x00dev->drv_data;
6735         u8 min_gain, rfcsr, bbp;
6736         u16 eeprom;
6737
6738         rfcsr = rt2800_rfcsr_read(rt2x00dev, 17);
6739
6740         rt2x00_set_field8(&rfcsr, RFCSR17_TX_LO1_EN, 0);
6741         if (rt2x00_rt(rt2x00dev, RT3070) ||
6742             rt2x00_rt_rev_lt(rt2x00dev, RT3071, REV_RT3071E) ||
6743             rt2x00_rt_rev_lt(rt2x00dev, RT3090, REV_RT3090E) ||
6744             rt2x00_rt_rev_lt(rt2x00dev, RT3390, REV_RT3390E)) {
6745                 if (!rt2x00_has_cap_external_lna_bg(rt2x00dev))
6746                         rt2x00_set_field8(&rfcsr, RFCSR17_R, 1);
6747         }
6748
6749         min_gain = rt2x00_rt(rt2x00dev, RT3070) ? 1 : 2;
6750         if (drv_data->txmixer_gain_24g >= min_gain) {
6751                 rt2x00_set_field8(&rfcsr, RFCSR17_TXMIXER_GAIN,
6752                                   drv_data->txmixer_gain_24g);
6753         }
6754
6755         rt2800_rfcsr_write(rt2x00dev, 17, rfcsr);
6756
6757         if (rt2x00_rt(rt2x00dev, RT3090)) {
6758                 /*  Turn off unused DAC1 and ADC1 to reduce power consumption */
6759                 bbp = rt2800_bbp_read(rt2x00dev, 138);
6760                 eeprom = rt2800_eeprom_read(rt2x00dev, EEPROM_NIC_CONF0);
6761                 if (rt2x00_get_field16(eeprom, EEPROM_NIC_CONF0_RXPATH) == 1)
6762                         rt2x00_set_field8(&bbp, BBP138_RX_ADC1, 0);
6763                 if (rt2x00_get_field16(eeprom, EEPROM_NIC_CONF0_TXPATH) == 1)
6764                         rt2x00_set_field8(&bbp, BBP138_TX_DAC1, 1);
6765                 rt2800_bbp_write(rt2x00dev, 138, bbp);
6766         }
6767
6768         if (rt2x00_rt(rt2x00dev, RT3070)) {
6769                 rfcsr = rt2800_rfcsr_read(rt2x00dev, 27);
6770                 if (rt2x00_rt_rev_lt(rt2x00dev, RT3070, REV_RT3070F))
6771                         rt2x00_set_field8(&rfcsr, RFCSR27_R1, 3);
6772                 else
6773                         rt2x00_set_field8(&rfcsr, RFCSR27_R1, 0);
6774                 rt2x00_set_field8(&rfcsr, RFCSR27_R2, 0);
6775                 rt2x00_set_field8(&rfcsr, RFCSR27_R3, 0);
6776                 rt2x00_set_field8(&rfcsr, RFCSR27_R4, 0);
6777                 rt2800_rfcsr_write(rt2x00dev, 27, rfcsr);
6778         } else if (rt2x00_rt(rt2x00dev, RT3071) ||
6779                    rt2x00_rt(rt2x00dev, RT3090) ||
6780                    rt2x00_rt(rt2x00dev, RT3390)) {
6781                 rfcsr = rt2800_rfcsr_read(rt2x00dev, 1);
6782                 rt2x00_set_field8(&rfcsr, RFCSR1_RF_BLOCK_EN, 1);
6783                 rt2x00_set_field8(&rfcsr, RFCSR1_RX0_PD, 0);
6784                 rt2x00_set_field8(&rfcsr, RFCSR1_TX0_PD, 0);
6785                 rt2x00_set_field8(&rfcsr, RFCSR1_RX1_PD, 1);
6786                 rt2x00_set_field8(&rfcsr, RFCSR1_TX1_PD, 1);
6787                 rt2800_rfcsr_write(rt2x00dev, 1, rfcsr);
6788
6789                 rfcsr = rt2800_rfcsr_read(rt2x00dev, 15);
6790                 rt2x00_set_field8(&rfcsr, RFCSR15_TX_LO2_EN, 0);
6791                 rt2800_rfcsr_write(rt2x00dev, 15, rfcsr);
6792
6793                 rfcsr = rt2800_rfcsr_read(rt2x00dev, 20);
6794                 rt2x00_set_field8(&rfcsr, RFCSR20_RX_LO1_EN, 0);
6795                 rt2800_rfcsr_write(rt2x00dev, 20, rfcsr);
6796
6797                 rfcsr = rt2800_rfcsr_read(rt2x00dev, 21);
6798                 rt2x00_set_field8(&rfcsr, RFCSR21_RX_LO2_EN, 0);
6799                 rt2800_rfcsr_write(rt2x00dev, 21, rfcsr);
6800         }
6801 }
6802
6803 static void rt2800_normal_mode_setup_3593(struct rt2x00_dev *rt2x00dev)
6804 {
6805         struct rt2800_drv_data *drv_data = rt2x00dev->drv_data;
6806         u8 rfcsr;
6807         u8 tx_gain;
6808
6809         rfcsr = rt2800_rfcsr_read(rt2x00dev, 50);
6810         rt2x00_set_field8(&rfcsr, RFCSR50_TX_LO2_EN, 0);
6811         rt2800_rfcsr_write(rt2x00dev, 50, rfcsr);
6812
6813         rfcsr = rt2800_rfcsr_read(rt2x00dev, 51);
6814         tx_gain = rt2x00_get_field8(drv_data->txmixer_gain_24g,
6815                                     RFCSR17_TXMIXER_GAIN);
6816         rt2x00_set_field8(&rfcsr, RFCSR51_BITS24, tx_gain);
6817         rt2800_rfcsr_write(rt2x00dev, 51, rfcsr);
6818
6819         rfcsr = rt2800_rfcsr_read(rt2x00dev, 38);
6820         rt2x00_set_field8(&rfcsr, RFCSR38_RX_LO1_EN, 0);
6821         rt2800_rfcsr_write(rt2x00dev, 38, rfcsr);
6822
6823         rfcsr = rt2800_rfcsr_read(rt2x00dev, 39);
6824         rt2x00_set_field8(&rfcsr, RFCSR39_RX_LO2_EN, 0);
6825         rt2800_rfcsr_write(rt2x00dev, 39, rfcsr);
6826
6827         rfcsr = rt2800_rfcsr_read(rt2x00dev, 1);
6828         rt2x00_set_field8(&rfcsr, RFCSR1_RF_BLOCK_EN, 1);
6829         rt2x00_set_field8(&rfcsr, RFCSR1_PLL_PD, 1);
6830         rt2800_rfcsr_write(rt2x00dev, 1, rfcsr);
6831
6832         rfcsr = rt2800_rfcsr_read(rt2x00dev, 30);
6833         rt2x00_set_field8(&rfcsr, RFCSR30_RX_VCM, 2);
6834         rt2800_rfcsr_write(rt2x00dev, 30, rfcsr);
6835
6836         /* TODO: enable stream mode */
6837 }
6838
6839 static void rt2800_normal_mode_setup_5xxx(struct rt2x00_dev *rt2x00dev)
6840 {
6841         u8 reg;
6842         u16 eeprom;
6843
6844         /*  Turn off unused DAC1 and ADC1 to reduce power consumption */
6845         reg = rt2800_bbp_read(rt2x00dev, 138);
6846         eeprom = rt2800_eeprom_read(rt2x00dev, EEPROM_NIC_CONF0);
6847         if (rt2x00_get_field16(eeprom, EEPROM_NIC_CONF0_RXPATH) == 1)
6848                 rt2x00_set_field8(&reg, BBP138_RX_ADC1, 0);
6849         if (rt2x00_get_field16(eeprom, EEPROM_NIC_CONF0_TXPATH) == 1)
6850                 rt2x00_set_field8(&reg, BBP138_TX_DAC1, 1);
6851         rt2800_bbp_write(rt2x00dev, 138, reg);
6852
6853         reg = rt2800_rfcsr_read(rt2x00dev, 38);
6854         rt2x00_set_field8(&reg, RFCSR38_RX_LO1_EN, 0);
6855         rt2800_rfcsr_write(rt2x00dev, 38, reg);
6856
6857         reg = rt2800_rfcsr_read(rt2x00dev, 39);
6858         rt2x00_set_field8(&reg, RFCSR39_RX_LO2_EN, 0);
6859         rt2800_rfcsr_write(rt2x00dev, 39, reg);
6860
6861         rt2800_bbp4_mac_if_ctrl(rt2x00dev);
6862
6863         reg = rt2800_rfcsr_read(rt2x00dev, 30);
6864         rt2x00_set_field8(&reg, RFCSR30_RX_VCM, 2);
6865         rt2800_rfcsr_write(rt2x00dev, 30, reg);
6866 }
6867
6868 static void rt2800_init_rfcsr_305x_soc(struct rt2x00_dev *rt2x00dev)
6869 {
6870         rt2800_rf_init_calibration(rt2x00dev, 30);
6871
6872         rt2800_rfcsr_write(rt2x00dev, 0, 0x50);
6873         rt2800_rfcsr_write(rt2x00dev, 1, 0x01);
6874         rt2800_rfcsr_write(rt2x00dev, 2, 0xf7);
6875         rt2800_rfcsr_write(rt2x00dev, 3, 0x75);
6876         rt2800_rfcsr_write(rt2x00dev, 4, 0x40);
6877         rt2800_rfcsr_write(rt2x00dev, 5, 0x03);
6878         rt2800_rfcsr_write(rt2x00dev, 6, 0x02);
6879         rt2800_rfcsr_write(rt2x00dev, 7, 0x50);
6880         rt2800_rfcsr_write(rt2x00dev, 8, 0x39);
6881         rt2800_rfcsr_write(rt2x00dev, 9, 0x0f);
6882         rt2800_rfcsr_write(rt2x00dev, 10, 0x60);
6883         rt2800_rfcsr_write(rt2x00dev, 11, 0x21);
6884         rt2800_rfcsr_write(rt2x00dev, 12, 0x75);
6885         rt2800_rfcsr_write(rt2x00dev, 13, 0x75);
6886         rt2800_rfcsr_write(rt2x00dev, 14, 0x90);
6887         rt2800_rfcsr_write(rt2x00dev, 15, 0x58);
6888         rt2800_rfcsr_write(rt2x00dev, 16, 0xb3);
6889         rt2800_rfcsr_write(rt2x00dev, 17, 0x92);
6890         rt2800_rfcsr_write(rt2x00dev, 18, 0x2c);
6891         rt2800_rfcsr_write(rt2x00dev, 19, 0x02);
6892         rt2800_rfcsr_write(rt2x00dev, 20, 0xba);
6893         rt2800_rfcsr_write(rt2x00dev, 21, 0xdb);
6894         rt2800_rfcsr_write(rt2x00dev, 22, 0x00);
6895         rt2800_rfcsr_write(rt2x00dev, 23, 0x31);
6896         rt2800_rfcsr_write(rt2x00dev, 24, 0x08);
6897         rt2800_rfcsr_write(rt2x00dev, 25, 0x01);
6898         rt2800_rfcsr_write(rt2x00dev, 26, 0x25);
6899         rt2800_rfcsr_write(rt2x00dev, 27, 0x23);
6900         rt2800_rfcsr_write(rt2x00dev, 28, 0x13);
6901         rt2800_rfcsr_write(rt2x00dev, 29, 0x83);
6902         rt2800_rfcsr_write(rt2x00dev, 30, 0x00);
6903         rt2800_rfcsr_write(rt2x00dev, 31, 0x00);
6904 }
6905
6906 static void rt2800_init_rfcsr_30xx(struct rt2x00_dev *rt2x00dev)
6907 {
6908         u8 rfcsr;
6909         u16 eeprom;
6910         u32 reg;
6911
6912         /* XXX vendor driver do this only for 3070 */
6913         rt2800_rf_init_calibration(rt2x00dev, 30);
6914
6915         rt2800_rfcsr_write(rt2x00dev, 4, 0x40);
6916         rt2800_rfcsr_write(rt2x00dev, 5, 0x03);
6917         rt2800_rfcsr_write(rt2x00dev, 6, 0x02);
6918         rt2800_rfcsr_write(rt2x00dev, 7, 0x60);
6919         rt2800_rfcsr_write(rt2x00dev, 9, 0x0f);
6920         rt2800_rfcsr_write(rt2x00dev, 10, 0x41);
6921         rt2800_rfcsr_write(rt2x00dev, 11, 0x21);
6922         rt2800_rfcsr_write(rt2x00dev, 12, 0x7b);
6923         rt2800_rfcsr_write(rt2x00dev, 14, 0x90);
6924         rt2800_rfcsr_write(rt2x00dev, 15, 0x58);
6925         rt2800_rfcsr_write(rt2x00dev, 16, 0xb3);
6926         rt2800_rfcsr_write(rt2x00dev, 17, 0x92);
6927         rt2800_rfcsr_write(rt2x00dev, 18, 0x2c);
6928         rt2800_rfcsr_write(rt2x00dev, 19, 0x02);
6929         rt2800_rfcsr_write(rt2x00dev, 20, 0xba);
6930         rt2800_rfcsr_write(rt2x00dev, 21, 0xdb);
6931         rt2800_rfcsr_write(rt2x00dev, 24, 0x16);
6932         rt2800_rfcsr_write(rt2x00dev, 25, 0x03);
6933         rt2800_rfcsr_write(rt2x00dev, 29, 0x1f);
6934
6935         if (rt2x00_rt_rev_lt(rt2x00dev, RT3070, REV_RT3070F)) {
6936                 reg = rt2800_register_read(rt2x00dev, LDO_CFG0);
6937                 rt2x00_set_field32(&reg, LDO_CFG0_BGSEL, 1);
6938                 rt2x00_set_field32(&reg, LDO_CFG0_LDO_CORE_VLEVEL, 3);
6939                 rt2800_register_write(rt2x00dev, LDO_CFG0, reg);
6940         } else if (rt2x00_rt(rt2x00dev, RT3071) ||
6941                    rt2x00_rt(rt2x00dev, RT3090)) {
6942                 rt2800_rfcsr_write(rt2x00dev, 31, 0x14);
6943
6944                 rfcsr = rt2800_rfcsr_read(rt2x00dev, 6);
6945                 rt2x00_set_field8(&rfcsr, RFCSR6_R2, 1);
6946                 rt2800_rfcsr_write(rt2x00dev, 6, rfcsr);
6947
6948                 reg = rt2800_register_read(rt2x00dev, LDO_CFG0);
6949                 rt2x00_set_field32(&reg, LDO_CFG0_BGSEL, 1);
6950                 if (rt2x00_rt_rev_lt(rt2x00dev, RT3071, REV_RT3071E) ||
6951                     rt2x00_rt_rev_lt(rt2x00dev, RT3090, REV_RT3090E)) {
6952                         eeprom = rt2800_eeprom_read(rt2x00dev, EEPROM_NIC_CONF1);
6953                         if (rt2x00_get_field16(eeprom, EEPROM_NIC_CONF1_DAC_TEST))
6954                                 rt2x00_set_field32(&reg, LDO_CFG0_LDO_CORE_VLEVEL, 3);
6955                         else
6956                                 rt2x00_set_field32(&reg, LDO_CFG0_LDO_CORE_VLEVEL, 0);
6957                 }
6958                 rt2800_register_write(rt2x00dev, LDO_CFG0, reg);
6959
6960                 reg = rt2800_register_read(rt2x00dev, GPIO_SWITCH);
6961                 rt2x00_set_field32(&reg, GPIO_SWITCH_5, 0);
6962                 rt2800_register_write(rt2x00dev, GPIO_SWITCH, reg);
6963         }
6964
6965         rt2800_rx_filter_calibration(rt2x00dev);
6966
6967         if (rt2x00_rt_rev_lt(rt2x00dev, RT3070, REV_RT3070F) ||
6968             rt2x00_rt_rev_lt(rt2x00dev, RT3071, REV_RT3071E) ||
6969             rt2x00_rt_rev_lt(rt2x00dev, RT3090, REV_RT3090E))
6970                 rt2800_rfcsr_write(rt2x00dev, 27, 0x03);
6971
6972         rt2800_led_open_drain_enable(rt2x00dev);
6973         rt2800_normal_mode_setup_3xxx(rt2x00dev);
6974 }
6975
6976 static void rt2800_init_rfcsr_3290(struct rt2x00_dev *rt2x00dev)
6977 {
6978         u8 rfcsr;
6979
6980         rt2800_rf_init_calibration(rt2x00dev, 2);
6981
6982         rt2800_rfcsr_write(rt2x00dev, 1, 0x0f);
6983         rt2800_rfcsr_write(rt2x00dev, 2, 0x80);
6984         rt2800_rfcsr_write(rt2x00dev, 3, 0x08);
6985         rt2800_rfcsr_write(rt2x00dev, 4, 0x00);
6986         rt2800_rfcsr_write(rt2x00dev, 6, 0xa0);
6987         rt2800_rfcsr_write(rt2x00dev, 8, 0xf3);
6988         rt2800_rfcsr_write(rt2x00dev, 9, 0x02);
6989         rt2800_rfcsr_write(rt2x00dev, 10, 0x53);
6990         rt2800_rfcsr_write(rt2x00dev, 11, 0x4a);
6991         rt2800_rfcsr_write(rt2x00dev, 12, 0x46);
6992         rt2800_rfcsr_write(rt2x00dev, 13, 0x9f);
6993         rt2800_rfcsr_write(rt2x00dev, 18, 0x02);
6994         rt2800_rfcsr_write(rt2x00dev, 22, 0x20);
6995         rt2800_rfcsr_write(rt2x00dev, 25, 0x83);
6996         rt2800_rfcsr_write(rt2x00dev, 26, 0x82);
6997         rt2800_rfcsr_write(rt2x00dev, 27, 0x09);
6998         rt2800_rfcsr_write(rt2x00dev, 29, 0x10);
6999         rt2800_rfcsr_write(rt2x00dev, 30, 0x10);
7000         rt2800_rfcsr_write(rt2x00dev, 31, 0x80);
7001         rt2800_rfcsr_write(rt2x00dev, 32, 0x80);
7002         rt2800_rfcsr_write(rt2x00dev, 33, 0x00);
7003         rt2800_rfcsr_write(rt2x00dev, 34, 0x05);
7004         rt2800_rfcsr_write(rt2x00dev, 35, 0x12);
7005         rt2800_rfcsr_write(rt2x00dev, 36, 0x00);
7006         rt2800_rfcsr_write(rt2x00dev, 38, 0x85);
7007         rt2800_rfcsr_write(rt2x00dev, 39, 0x1b);
7008         rt2800_rfcsr_write(rt2x00dev, 40, 0x0b);
7009         rt2800_rfcsr_write(rt2x00dev, 41, 0xbb);
7010         rt2800_rfcsr_write(rt2x00dev, 42, 0xd5);
7011         rt2800_rfcsr_write(rt2x00dev, 43, 0x7b);
7012         rt2800_rfcsr_write(rt2x00dev, 44, 0x0e);
7013         rt2800_rfcsr_write(rt2x00dev, 45, 0xa2);
7014         rt2800_rfcsr_write(rt2x00dev, 46, 0x73);
7015         rt2800_rfcsr_write(rt2x00dev, 47, 0x00);
7016         rt2800_rfcsr_write(rt2x00dev, 48, 0x10);
7017         rt2800_rfcsr_write(rt2x00dev, 49, 0x98);
7018         rt2800_rfcsr_write(rt2x00dev, 52, 0x38);
7019         rt2800_rfcsr_write(rt2x00dev, 53, 0x00);
7020         rt2800_rfcsr_write(rt2x00dev, 54, 0x78);
7021         rt2800_rfcsr_write(rt2x00dev, 55, 0x43);
7022         rt2800_rfcsr_write(rt2x00dev, 56, 0x02);
7023         rt2800_rfcsr_write(rt2x00dev, 57, 0x80);
7024         rt2800_rfcsr_write(rt2x00dev, 58, 0x7f);
7025         rt2800_rfcsr_write(rt2x00dev, 59, 0x09);
7026         rt2800_rfcsr_write(rt2x00dev, 60, 0x45);
7027         rt2800_rfcsr_write(rt2x00dev, 61, 0xc1);
7028
7029         rfcsr = rt2800_rfcsr_read(rt2x00dev, 29);
7030         rt2x00_set_field8(&rfcsr, RFCSR29_RSSI_GAIN, 3);
7031         rt2800_rfcsr_write(rt2x00dev, 29, rfcsr);
7032
7033         rt2800_led_open_drain_enable(rt2x00dev);
7034         rt2800_normal_mode_setup_3xxx(rt2x00dev);
7035 }
7036
7037 static void rt2800_init_rfcsr_3352(struct rt2x00_dev *rt2x00dev)
7038 {
7039         int tx0_ext_pa = test_bit(CAPABILITY_EXTERNAL_PA_TX0,
7040                                   &rt2x00dev->cap_flags);
7041         int tx1_ext_pa = test_bit(CAPABILITY_EXTERNAL_PA_TX1,
7042                                   &rt2x00dev->cap_flags);
7043         u8 rfcsr;
7044
7045         rt2800_rf_init_calibration(rt2x00dev, 30);
7046
7047         rt2800_rfcsr_write(rt2x00dev, 0, 0xf0);
7048         rt2800_rfcsr_write(rt2x00dev, 1, 0x23);
7049         rt2800_rfcsr_write(rt2x00dev, 2, 0x50);
7050         rt2800_rfcsr_write(rt2x00dev, 3, 0x18);
7051         rt2800_rfcsr_write(rt2x00dev, 4, 0x00);
7052         rt2800_rfcsr_write(rt2x00dev, 5, 0x00);
7053         rt2800_rfcsr_write(rt2x00dev, 6, 0x33);
7054         rt2800_rfcsr_write(rt2x00dev, 7, 0x00);
7055         rt2800_rfcsr_write(rt2x00dev, 8, 0xf1);
7056         rt2800_rfcsr_write(rt2x00dev, 9, 0x02);
7057         rt2800_rfcsr_write(rt2x00dev, 10, 0xd2);
7058         rt2800_rfcsr_write(rt2x00dev, 11, 0x42);
7059         rt2800_rfcsr_write(rt2x00dev, 12, 0x1c);
7060         rt2800_rfcsr_write(rt2x00dev, 13, 0x00);
7061         rt2800_rfcsr_write(rt2x00dev, 14, 0x5a);
7062         rt2800_rfcsr_write(rt2x00dev, 15, 0x00);
7063         rt2800_rfcsr_write(rt2x00dev, 16, 0x01);
7064         rt2800_rfcsr_write(rt2x00dev, 18, 0x45);
7065         rt2800_rfcsr_write(rt2x00dev, 19, 0x02);
7066         rt2800_rfcsr_write(rt2x00dev, 20, 0x00);
7067         rt2800_rfcsr_write(rt2x00dev, 21, 0x00);
7068         rt2800_rfcsr_write(rt2x00dev, 22, 0x00);
7069         rt2800_rfcsr_write(rt2x00dev, 23, 0x00);
7070         rt2800_rfcsr_write(rt2x00dev, 24, 0x00);
7071         rt2800_rfcsr_write(rt2x00dev, 25, 0x80);
7072         rt2800_rfcsr_write(rt2x00dev, 26, 0x00);
7073         rt2800_rfcsr_write(rt2x00dev, 27, 0x03);
7074         rt2800_rfcsr_write(rt2x00dev, 28, 0x03);
7075         rt2800_rfcsr_write(rt2x00dev, 29, 0x00);
7076         rt2800_rfcsr_write(rt2x00dev, 30, 0x10);
7077         rt2800_rfcsr_write(rt2x00dev, 31, 0x80);
7078         rt2800_rfcsr_write(rt2x00dev, 32, 0x80);
7079         rt2800_rfcsr_write(rt2x00dev, 33, 0x00);
7080         rfcsr = 0x01;
7081         if (tx0_ext_pa)
7082                 rt2x00_set_field8(&rfcsr, RFCSR34_TX0_EXT_PA, 1);
7083         if (tx1_ext_pa)
7084                 rt2x00_set_field8(&rfcsr, RFCSR34_TX1_EXT_PA, 1);
7085         rt2800_rfcsr_write(rt2x00dev, 34, rfcsr);
7086         rt2800_rfcsr_write(rt2x00dev, 35, 0x03);
7087         rt2800_rfcsr_write(rt2x00dev, 36, 0xbd);
7088         rt2800_rfcsr_write(rt2x00dev, 37, 0x3c);
7089         rt2800_rfcsr_write(rt2x00dev, 38, 0x5f);
7090         rt2800_rfcsr_write(rt2x00dev, 39, 0xc5);
7091         rt2800_rfcsr_write(rt2x00dev, 40, 0x33);
7092         rfcsr = 0x52;
7093         if (!tx0_ext_pa) {
7094                 rt2x00_set_field8(&rfcsr, RFCSR41_BIT1, 1);
7095                 rt2x00_set_field8(&rfcsr, RFCSR41_BIT4, 1);
7096         }
7097         rt2800_rfcsr_write(rt2x00dev, 41, rfcsr);
7098         rfcsr = 0x52;
7099         if (!tx1_ext_pa) {
7100                 rt2x00_set_field8(&rfcsr, RFCSR42_BIT1, 1);
7101                 rt2x00_set_field8(&rfcsr, RFCSR42_BIT4, 1);
7102         }
7103         rt2800_rfcsr_write(rt2x00dev, 42, rfcsr);
7104         rt2800_rfcsr_write(rt2x00dev, 43, 0xdb);
7105         rt2800_rfcsr_write(rt2x00dev, 44, 0xdb);
7106         rt2800_rfcsr_write(rt2x00dev, 45, 0xdb);
7107         rt2800_rfcsr_write(rt2x00dev, 46, 0xdd);
7108         rt2800_rfcsr_write(rt2x00dev, 47, 0x0d);
7109         rt2800_rfcsr_write(rt2x00dev, 48, 0x14);
7110         rt2800_rfcsr_write(rt2x00dev, 49, 0x00);
7111         rfcsr = 0x2d;
7112         if (tx0_ext_pa)
7113                 rt2x00_set_field8(&rfcsr, RFCSR50_TX0_EXT_PA, 1);
7114         if (tx1_ext_pa)
7115                 rt2x00_set_field8(&rfcsr, RFCSR50_TX1_EXT_PA, 1);
7116         rt2800_rfcsr_write(rt2x00dev, 50, rfcsr);
7117         rt2800_rfcsr_write(rt2x00dev, 51, (tx0_ext_pa ? 0x52 : 0x7f));
7118         rt2800_rfcsr_write(rt2x00dev, 52, (tx0_ext_pa ? 0xc0 : 0x00));
7119         rt2800_rfcsr_write(rt2x00dev, 53, (tx0_ext_pa ? 0xd2 : 0x52));
7120         rt2800_rfcsr_write(rt2x00dev, 54, (tx0_ext_pa ? 0xc0 : 0x1b));
7121         rt2800_rfcsr_write(rt2x00dev, 55, (tx1_ext_pa ? 0x52 : 0x7f));
7122         rt2800_rfcsr_write(rt2x00dev, 56, (tx1_ext_pa ? 0xc0 : 0x00));
7123         rt2800_rfcsr_write(rt2x00dev, 57, (tx0_ext_pa ? 0x49 : 0x52));
7124         rt2800_rfcsr_write(rt2x00dev, 58, (tx1_ext_pa ? 0xc0 : 0x1b));
7125         rt2800_rfcsr_write(rt2x00dev, 59, 0x00);
7126         rt2800_rfcsr_write(rt2x00dev, 60, 0x00);
7127         rt2800_rfcsr_write(rt2x00dev, 61, 0x00);
7128         rt2800_rfcsr_write(rt2x00dev, 62, 0x00);
7129         rt2800_rfcsr_write(rt2x00dev, 63, 0x00);
7130
7131         rt2800_rx_filter_calibration(rt2x00dev);
7132         rt2800_led_open_drain_enable(rt2x00dev);
7133         rt2800_normal_mode_setup_3xxx(rt2x00dev);
7134 }
7135
7136 static void rt2800_init_rfcsr_3390(struct rt2x00_dev *rt2x00dev)
7137 {
7138         u32 reg;
7139
7140         rt2800_rf_init_calibration(rt2x00dev, 30);
7141
7142         rt2800_rfcsr_write(rt2x00dev, 0, 0xa0);
7143         rt2800_rfcsr_write(rt2x00dev, 1, 0xe1);
7144         rt2800_rfcsr_write(rt2x00dev, 2, 0xf1);
7145         rt2800_rfcsr_write(rt2x00dev, 3, 0x62);
7146         rt2800_rfcsr_write(rt2x00dev, 4, 0x40);
7147         rt2800_rfcsr_write(rt2x00dev, 5, 0x8b);
7148         rt2800_rfcsr_write(rt2x00dev, 6, 0x42);
7149         rt2800_rfcsr_write(rt2x00dev, 7, 0x34);
7150         rt2800_rfcsr_write(rt2x00dev, 8, 0x00);
7151         rt2800_rfcsr_write(rt2x00dev, 9, 0xc0);
7152         rt2800_rfcsr_write(rt2x00dev, 10, 0x61);
7153         rt2800_rfcsr_write(rt2x00dev, 11, 0x21);
7154         rt2800_rfcsr_write(rt2x00dev, 12, 0x3b);
7155         rt2800_rfcsr_write(rt2x00dev, 13, 0xe0);
7156         rt2800_rfcsr_write(rt2x00dev, 14, 0x90);
7157         rt2800_rfcsr_write(rt2x00dev, 15, 0x53);
7158         rt2800_rfcsr_write(rt2x00dev, 16, 0xe0);
7159         rt2800_rfcsr_write(rt2x00dev, 17, 0x94);
7160         rt2800_rfcsr_write(rt2x00dev, 18, 0x5c);
7161         rt2800_rfcsr_write(rt2x00dev, 19, 0x4a);
7162         rt2800_rfcsr_write(rt2x00dev, 20, 0xb2);
7163         rt2800_rfcsr_write(rt2x00dev, 21, 0xf6);
7164         rt2800_rfcsr_write(rt2x00dev, 22, 0x00);
7165         rt2800_rfcsr_write(rt2x00dev, 23, 0x14);
7166         rt2800_rfcsr_write(rt2x00dev, 24, 0x08);
7167         rt2800_rfcsr_write(rt2x00dev, 25, 0x3d);
7168         rt2800_rfcsr_write(rt2x00dev, 26, 0x85);
7169         rt2800_rfcsr_write(rt2x00dev, 27, 0x00);
7170         rt2800_rfcsr_write(rt2x00dev, 28, 0x41);
7171         rt2800_rfcsr_write(rt2x00dev, 29, 0x8f);
7172         rt2800_rfcsr_write(rt2x00dev, 30, 0x20);
7173         rt2800_rfcsr_write(rt2x00dev, 31, 0x0f);
7174
7175         reg = rt2800_register_read(rt2x00dev, GPIO_SWITCH);
7176         rt2x00_set_field32(&reg, GPIO_SWITCH_5, 0);
7177         rt2800_register_write(rt2x00dev, GPIO_SWITCH, reg);
7178
7179         rt2800_rx_filter_calibration(rt2x00dev);
7180
7181         if (rt2x00_rt_rev_lt(rt2x00dev, RT3390, REV_RT3390E))
7182                 rt2800_rfcsr_write(rt2x00dev, 27, 0x03);
7183
7184         rt2800_led_open_drain_enable(rt2x00dev);
7185         rt2800_normal_mode_setup_3xxx(rt2x00dev);
7186 }
7187
7188 static void rt2800_init_rfcsr_3572(struct rt2x00_dev *rt2x00dev)
7189 {
7190         u8 rfcsr;
7191         u32 reg;
7192
7193         rt2800_rf_init_calibration(rt2x00dev, 30);
7194
7195         rt2800_rfcsr_write(rt2x00dev, 0, 0x70);
7196         rt2800_rfcsr_write(rt2x00dev, 1, 0x81);
7197         rt2800_rfcsr_write(rt2x00dev, 2, 0xf1);
7198         rt2800_rfcsr_write(rt2x00dev, 3, 0x02);
7199         rt2800_rfcsr_write(rt2x00dev, 4, 0x4c);
7200         rt2800_rfcsr_write(rt2x00dev, 5, 0x05);
7201         rt2800_rfcsr_write(rt2x00dev, 6, 0x4a);
7202         rt2800_rfcsr_write(rt2x00dev, 7, 0xd8);
7203         rt2800_rfcsr_write(rt2x00dev, 9, 0xc3);
7204         rt2800_rfcsr_write(rt2x00dev, 10, 0xf1);
7205         rt2800_rfcsr_write(rt2x00dev, 11, 0xb9);
7206         rt2800_rfcsr_write(rt2x00dev, 12, 0x70);
7207         rt2800_rfcsr_write(rt2x00dev, 13, 0x65);
7208         rt2800_rfcsr_write(rt2x00dev, 14, 0xa0);
7209         rt2800_rfcsr_write(rt2x00dev, 15, 0x53);
7210         rt2800_rfcsr_write(rt2x00dev, 16, 0x4c);
7211         rt2800_rfcsr_write(rt2x00dev, 17, 0x23);
7212         rt2800_rfcsr_write(rt2x00dev, 18, 0xac);
7213         rt2800_rfcsr_write(rt2x00dev, 19, 0x93);
7214         rt2800_rfcsr_write(rt2x00dev, 20, 0xb3);
7215         rt2800_rfcsr_write(rt2x00dev, 21, 0xd0);
7216         rt2800_rfcsr_write(rt2x00dev, 22, 0x00);
7217         rt2800_rfcsr_write(rt2x00dev, 23, 0x3c);
7218         rt2800_rfcsr_write(rt2x00dev, 24, 0x16);
7219         rt2800_rfcsr_write(rt2x00dev, 25, 0x15);
7220         rt2800_rfcsr_write(rt2x00dev, 26, 0x85);
7221         rt2800_rfcsr_write(rt2x00dev, 27, 0x00);
7222         rt2800_rfcsr_write(rt2x00dev, 28, 0x00);
7223         rt2800_rfcsr_write(rt2x00dev, 29, 0x9b);
7224         rt2800_rfcsr_write(rt2x00dev, 30, 0x09);
7225         rt2800_rfcsr_write(rt2x00dev, 31, 0x10);
7226
7227         rfcsr = rt2800_rfcsr_read(rt2x00dev, 6);
7228         rt2x00_set_field8(&rfcsr, RFCSR6_R2, 1);
7229         rt2800_rfcsr_write(rt2x00dev, 6, rfcsr);
7230
7231         reg = rt2800_register_read(rt2x00dev, LDO_CFG0);
7232         rt2x00_set_field32(&reg, LDO_CFG0_LDO_CORE_VLEVEL, 3);
7233         rt2x00_set_field32(&reg, LDO_CFG0_BGSEL, 1);
7234         rt2800_register_write(rt2x00dev, LDO_CFG0, reg);
7235         msleep(1);
7236         reg = rt2800_register_read(rt2x00dev, LDO_CFG0);
7237         rt2x00_set_field32(&reg, LDO_CFG0_LDO_CORE_VLEVEL, 0);
7238         rt2x00_set_field32(&reg, LDO_CFG0_BGSEL, 1);
7239         rt2800_register_write(rt2x00dev, LDO_CFG0, reg);
7240
7241         rt2800_rx_filter_calibration(rt2x00dev);
7242         rt2800_led_open_drain_enable(rt2x00dev);
7243         rt2800_normal_mode_setup_3xxx(rt2x00dev);
7244 }
7245
7246 static void rt3593_post_bbp_init(struct rt2x00_dev *rt2x00dev)
7247 {
7248         u8 bbp;
7249         bool txbf_enabled = false; /* FIXME */
7250
7251         bbp = rt2800_bbp_read(rt2x00dev, 105);
7252         if (rt2x00dev->default_ant.rx_chain_num == 1)
7253                 rt2x00_set_field8(&bbp, BBP105_MLD, 0);
7254         else
7255                 rt2x00_set_field8(&bbp, BBP105_MLD, 1);
7256         rt2800_bbp_write(rt2x00dev, 105, bbp);
7257
7258         rt2800_bbp4_mac_if_ctrl(rt2x00dev);
7259
7260         rt2800_bbp_write(rt2x00dev, 92, 0x02);
7261         rt2800_bbp_write(rt2x00dev, 82, 0x82);
7262         rt2800_bbp_write(rt2x00dev, 106, 0x05);
7263         rt2800_bbp_write(rt2x00dev, 104, 0x92);
7264         rt2800_bbp_write(rt2x00dev, 88, 0x90);
7265         rt2800_bbp_write(rt2x00dev, 148, 0xc8);
7266         rt2800_bbp_write(rt2x00dev, 47, 0x48);
7267         rt2800_bbp_write(rt2x00dev, 120, 0x50);
7268
7269         if (txbf_enabled)
7270                 rt2800_bbp_write(rt2x00dev, 163, 0xbd);
7271         else
7272                 rt2800_bbp_write(rt2x00dev, 163, 0x9d);
7273
7274         /* SNR mapping */
7275         rt2800_bbp_write(rt2x00dev, 142, 6);
7276         rt2800_bbp_write(rt2x00dev, 143, 160);
7277         rt2800_bbp_write(rt2x00dev, 142, 7);
7278         rt2800_bbp_write(rt2x00dev, 143, 161);
7279         rt2800_bbp_write(rt2x00dev, 142, 8);
7280         rt2800_bbp_write(rt2x00dev, 143, 162);
7281
7282         /* ADC/DAC control */
7283         rt2800_bbp_write(rt2x00dev, 31, 0x08);
7284
7285         /* RX AGC energy lower bound in log2 */
7286         rt2800_bbp_write(rt2x00dev, 68, 0x0b);
7287
7288         /* FIXME: BBP 105 owerwrite? */
7289         rt2800_bbp_write(rt2x00dev, 105, 0x04);
7290
7291 }
7292
7293 static void rt2800_init_rfcsr_3593(struct rt2x00_dev *rt2x00dev)
7294 {
7295         struct rt2800_drv_data *drv_data = rt2x00dev->drv_data;
7296         u32 reg;
7297         u8 rfcsr;
7298
7299         /* Disable GPIO #4 and #7 function for LAN PE control */
7300         reg = rt2800_register_read(rt2x00dev, GPIO_SWITCH);
7301         rt2x00_set_field32(&reg, GPIO_SWITCH_4, 0);
7302         rt2x00_set_field32(&reg, GPIO_SWITCH_7, 0);
7303         rt2800_register_write(rt2x00dev, GPIO_SWITCH, reg);
7304
7305         /* Initialize default register values */
7306         rt2800_rfcsr_write(rt2x00dev, 1, 0x03);
7307         rt2800_rfcsr_write(rt2x00dev, 3, 0x80);
7308         rt2800_rfcsr_write(rt2x00dev, 5, 0x00);
7309         rt2800_rfcsr_write(rt2x00dev, 6, 0x40);
7310         rt2800_rfcsr_write(rt2x00dev, 8, 0xf1);
7311         rt2800_rfcsr_write(rt2x00dev, 9, 0x02);
7312         rt2800_rfcsr_write(rt2x00dev, 10, 0xd3);
7313         rt2800_rfcsr_write(rt2x00dev, 11, 0x40);
7314         rt2800_rfcsr_write(rt2x00dev, 12, 0x4e);
7315         rt2800_rfcsr_write(rt2x00dev, 13, 0x12);
7316         rt2800_rfcsr_write(rt2x00dev, 18, 0x40);
7317         rt2800_rfcsr_write(rt2x00dev, 22, 0x20);
7318         rt2800_rfcsr_write(rt2x00dev, 30, 0x10);
7319         rt2800_rfcsr_write(rt2x00dev, 31, 0x80);
7320         rt2800_rfcsr_write(rt2x00dev, 32, 0x78);
7321         rt2800_rfcsr_write(rt2x00dev, 33, 0x3b);
7322         rt2800_rfcsr_write(rt2x00dev, 34, 0x3c);
7323         rt2800_rfcsr_write(rt2x00dev, 35, 0xe0);
7324         rt2800_rfcsr_write(rt2x00dev, 38, 0x86);
7325         rt2800_rfcsr_write(rt2x00dev, 39, 0x23);
7326         rt2800_rfcsr_write(rt2x00dev, 44, 0xd3);
7327         rt2800_rfcsr_write(rt2x00dev, 45, 0xbb);
7328         rt2800_rfcsr_write(rt2x00dev, 46, 0x60);
7329         rt2800_rfcsr_write(rt2x00dev, 49, 0x8e);
7330         rt2800_rfcsr_write(rt2x00dev, 50, 0x86);
7331         rt2800_rfcsr_write(rt2x00dev, 51, 0x75);
7332         rt2800_rfcsr_write(rt2x00dev, 52, 0x45);
7333         rt2800_rfcsr_write(rt2x00dev, 53, 0x18);
7334         rt2800_rfcsr_write(rt2x00dev, 54, 0x18);
7335         rt2800_rfcsr_write(rt2x00dev, 55, 0x18);
7336         rt2800_rfcsr_write(rt2x00dev, 56, 0xdb);
7337         rt2800_rfcsr_write(rt2x00dev, 57, 0x6e);
7338
7339         /* Initiate calibration */
7340         /* TODO: use rt2800_rf_init_calibration ? */
7341         rfcsr = rt2800_rfcsr_read(rt2x00dev, 2);
7342         rt2x00_set_field8(&rfcsr, RFCSR2_RESCAL_EN, 1);
7343         rt2800_rfcsr_write(rt2x00dev, 2, rfcsr);
7344
7345         rt2800_freq_cal_mode1(rt2x00dev);
7346
7347         rfcsr = rt2800_rfcsr_read(rt2x00dev, 18);
7348         rt2x00_set_field8(&rfcsr, RFCSR18_XO_TUNE_BYPASS, 1);
7349         rt2800_rfcsr_write(rt2x00dev, 18, rfcsr);
7350
7351         reg = rt2800_register_read(rt2x00dev, LDO_CFG0);
7352         rt2x00_set_field32(&reg, LDO_CFG0_LDO_CORE_VLEVEL, 3);
7353         rt2x00_set_field32(&reg, LDO_CFG0_BGSEL, 1);
7354         rt2800_register_write(rt2x00dev, LDO_CFG0, reg);
7355         usleep_range(1000, 1500);
7356         reg = rt2800_register_read(rt2x00dev, LDO_CFG0);
7357         rt2x00_set_field32(&reg, LDO_CFG0_LDO_CORE_VLEVEL, 0);
7358         rt2800_register_write(rt2x00dev, LDO_CFG0, reg);
7359
7360         /* Set initial values for RX filter calibration */
7361         drv_data->calibration_bw20 = 0x1f;
7362         drv_data->calibration_bw40 = 0x2f;
7363
7364         /* Save BBP 25 & 26 values for later use in channel switching */
7365         drv_data->bbp25 = rt2800_bbp_read(rt2x00dev, 25);
7366         drv_data->bbp26 = rt2800_bbp_read(rt2x00dev, 26);
7367
7368         rt2800_led_open_drain_enable(rt2x00dev);
7369         rt2800_normal_mode_setup_3593(rt2x00dev);
7370
7371         rt3593_post_bbp_init(rt2x00dev);
7372
7373         /* TODO: enable stream mode support */
7374 }
7375
7376 static void rt2800_init_rfcsr_5350(struct rt2x00_dev *rt2x00dev)
7377 {
7378         rt2800_rfcsr_write(rt2x00dev, 0, 0xf0);
7379         rt2800_rfcsr_write(rt2x00dev, 1, 0x23);
7380         rt2800_rfcsr_write(rt2x00dev, 2, 0x50);
7381         rt2800_rfcsr_write(rt2x00dev, 3, 0x08);
7382         rt2800_rfcsr_write(rt2x00dev, 4, 0x49);
7383         rt2800_rfcsr_write(rt2x00dev, 5, 0x10);
7384         rt2800_rfcsr_write(rt2x00dev, 6, 0xe0);
7385         rt2800_rfcsr_write(rt2x00dev, 7, 0x00);
7386         rt2800_rfcsr_write(rt2x00dev, 8, 0xf1);
7387         rt2800_rfcsr_write(rt2x00dev, 9, 0x02);
7388         rt2800_rfcsr_write(rt2x00dev, 10, 0x53);
7389         rt2800_rfcsr_write(rt2x00dev, 11, 0x4a);
7390         rt2800_rfcsr_write(rt2x00dev, 12, 0x46);
7391         if (rt2800_clk_is_20mhz(rt2x00dev))
7392                 rt2800_rfcsr_write(rt2x00dev, 13, 0x1f);
7393         else
7394                 rt2800_rfcsr_write(rt2x00dev, 13, 0x9f);
7395         rt2800_rfcsr_write(rt2x00dev, 14, 0x00);
7396         rt2800_rfcsr_write(rt2x00dev, 15, 0x00);
7397         rt2800_rfcsr_write(rt2x00dev, 16, 0xc0);
7398         rt2800_rfcsr_write(rt2x00dev, 18, 0x03);
7399         rt2800_rfcsr_write(rt2x00dev, 19, 0x00);
7400         rt2800_rfcsr_write(rt2x00dev, 20, 0x00);
7401         rt2800_rfcsr_write(rt2x00dev, 21, 0x00);
7402         rt2800_rfcsr_write(rt2x00dev, 22, 0x20);
7403         rt2800_rfcsr_write(rt2x00dev, 23, 0x00);
7404         rt2800_rfcsr_write(rt2x00dev, 24, 0x00);
7405         rt2800_rfcsr_write(rt2x00dev, 25, 0x80);
7406         rt2800_rfcsr_write(rt2x00dev, 26, 0x00);
7407         rt2800_rfcsr_write(rt2x00dev, 27, 0x03);
7408         rt2800_rfcsr_write(rt2x00dev, 28, 0x00);
7409         rt2800_rfcsr_write(rt2x00dev, 29, 0xd0);
7410         rt2800_rfcsr_write(rt2x00dev, 30, 0x10);
7411         rt2800_rfcsr_write(rt2x00dev, 31, 0x80);
7412         rt2800_rfcsr_write(rt2x00dev, 32, 0x80);
7413         rt2800_rfcsr_write(rt2x00dev, 33, 0x00);
7414         rt2800_rfcsr_write(rt2x00dev, 34, 0x07);
7415         rt2800_rfcsr_write(rt2x00dev, 35, 0x12);
7416         rt2800_rfcsr_write(rt2x00dev, 36, 0x00);
7417         rt2800_rfcsr_write(rt2x00dev, 37, 0x08);
7418         rt2800_rfcsr_write(rt2x00dev, 38, 0x85);
7419         rt2800_rfcsr_write(rt2x00dev, 39, 0x1b);
7420         rt2800_rfcsr_write(rt2x00dev, 40, 0x0b);
7421         rt2800_rfcsr_write(rt2x00dev, 41, 0xbb);
7422         rt2800_rfcsr_write(rt2x00dev, 42, 0xd5);
7423         rt2800_rfcsr_write(rt2x00dev, 43, 0x9b);
7424         rt2800_rfcsr_write(rt2x00dev, 44, 0x0c);
7425         rt2800_rfcsr_write(rt2x00dev, 45, 0xa6);
7426         rt2800_rfcsr_write(rt2x00dev, 46, 0x73);
7427         rt2800_rfcsr_write(rt2x00dev, 47, 0x00);
7428         rt2800_rfcsr_write(rt2x00dev, 48, 0x10);
7429         rt2800_rfcsr_write(rt2x00dev, 49, 0x80);
7430         rt2800_rfcsr_write(rt2x00dev, 50, 0x00);
7431         rt2800_rfcsr_write(rt2x00dev, 51, 0x00);
7432         rt2800_rfcsr_write(rt2x00dev, 52, 0x38);
7433         rt2800_rfcsr_write(rt2x00dev, 53, 0x00);
7434         rt2800_rfcsr_write(rt2x00dev, 54, 0x38);
7435         rt2800_rfcsr_write(rt2x00dev, 55, 0x43);
7436         rt2800_rfcsr_write(rt2x00dev, 56, 0x82);
7437         rt2800_rfcsr_write(rt2x00dev, 57, 0x00);
7438         rt2800_rfcsr_write(rt2x00dev, 58, 0x39);
7439         rt2800_rfcsr_write(rt2x00dev, 59, 0x0b);
7440         rt2800_rfcsr_write(rt2x00dev, 60, 0x45);
7441         rt2800_rfcsr_write(rt2x00dev, 61, 0xd1);
7442         rt2800_rfcsr_write(rt2x00dev, 62, 0x00);
7443         rt2800_rfcsr_write(rt2x00dev, 63, 0x00);
7444 }
7445
7446 static void rt2800_init_rfcsr_5390(struct rt2x00_dev *rt2x00dev)
7447 {
7448         rt2800_rf_init_calibration(rt2x00dev, 2);
7449
7450         rt2800_rfcsr_write(rt2x00dev, 1, 0x0f);
7451         rt2800_rfcsr_write(rt2x00dev, 2, 0x80);
7452         rt2800_rfcsr_write(rt2x00dev, 3, 0x88);
7453         rt2800_rfcsr_write(rt2x00dev, 5, 0x10);
7454         if (rt2x00_rt_rev_gte(rt2x00dev, RT5390, REV_RT5390F))
7455                 rt2800_rfcsr_write(rt2x00dev, 6, 0xe0);
7456         else
7457                 rt2800_rfcsr_write(rt2x00dev, 6, 0xa0);
7458         rt2800_rfcsr_write(rt2x00dev, 7, 0x00);
7459         rt2800_rfcsr_write(rt2x00dev, 10, 0x53);
7460         rt2800_rfcsr_write(rt2x00dev, 11, 0x4a);
7461         rt2800_rfcsr_write(rt2x00dev, 12, 0x46);
7462         rt2800_rfcsr_write(rt2x00dev, 13, 0x9f);
7463         rt2800_rfcsr_write(rt2x00dev, 14, 0x00);
7464         rt2800_rfcsr_write(rt2x00dev, 15, 0x00);
7465         rt2800_rfcsr_write(rt2x00dev, 16, 0x00);
7466         rt2800_rfcsr_write(rt2x00dev, 18, 0x03);
7467         rt2800_rfcsr_write(rt2x00dev, 19, 0x00);
7468
7469         rt2800_rfcsr_write(rt2x00dev, 20, 0x00);
7470         rt2800_rfcsr_write(rt2x00dev, 21, 0x00);
7471         rt2800_rfcsr_write(rt2x00dev, 22, 0x20);
7472         rt2800_rfcsr_write(rt2x00dev, 23, 0x00);
7473         rt2800_rfcsr_write(rt2x00dev, 24, 0x00);
7474         if (rt2x00_is_usb(rt2x00dev) &&
7475             rt2x00_rt_rev_gte(rt2x00dev, RT5390, REV_RT5390F))
7476                 rt2800_rfcsr_write(rt2x00dev, 25, 0x80);
7477         else
7478                 rt2800_rfcsr_write(rt2x00dev, 25, 0xc0);
7479         rt2800_rfcsr_write(rt2x00dev, 26, 0x00);
7480         rt2800_rfcsr_write(rt2x00dev, 27, 0x09);
7481         rt2800_rfcsr_write(rt2x00dev, 28, 0x00);
7482         rt2800_rfcsr_write(rt2x00dev, 29, 0x10);
7483
7484         rt2800_rfcsr_write(rt2x00dev, 30, 0x10);
7485         rt2800_rfcsr_write(rt2x00dev, 31, 0x80);
7486         rt2800_rfcsr_write(rt2x00dev, 32, 0x80);
7487         rt2800_rfcsr_write(rt2x00dev, 33, 0x00);
7488         rt2800_rfcsr_write(rt2x00dev, 34, 0x07);
7489         rt2800_rfcsr_write(rt2x00dev, 35, 0x12);
7490         rt2800_rfcsr_write(rt2x00dev, 36, 0x00);
7491         rt2800_rfcsr_write(rt2x00dev, 37, 0x08);
7492         rt2800_rfcsr_write(rt2x00dev, 38, 0x85);
7493         rt2800_rfcsr_write(rt2x00dev, 39, 0x1b);
7494
7495         rt2800_rfcsr_write(rt2x00dev, 40, 0x0b);
7496         rt2800_rfcsr_write(rt2x00dev, 41, 0xbb);
7497         rt2800_rfcsr_write(rt2x00dev, 42, 0xd2);
7498         rt2800_rfcsr_write(rt2x00dev, 43, 0x9a);
7499         rt2800_rfcsr_write(rt2x00dev, 44, 0x0e);
7500         rt2800_rfcsr_write(rt2x00dev, 45, 0xa2);
7501         if (rt2x00_rt_rev_gte(rt2x00dev, RT5390, REV_RT5390F))
7502                 rt2800_rfcsr_write(rt2x00dev, 46, 0x73);
7503         else
7504                 rt2800_rfcsr_write(rt2x00dev, 46, 0x7b);
7505         rt2800_rfcsr_write(rt2x00dev, 47, 0x00);
7506         rt2800_rfcsr_write(rt2x00dev, 48, 0x10);
7507         rt2800_rfcsr_write(rt2x00dev, 49, 0x94);
7508
7509         rt2800_rfcsr_write(rt2x00dev, 52, 0x38);
7510         if (rt2x00_rt_rev_gte(rt2x00dev, RT5390, REV_RT5390F))
7511                 rt2800_rfcsr_write(rt2x00dev, 53, 0x00);
7512         else
7513                 rt2800_rfcsr_write(rt2x00dev, 53, 0x84);
7514         rt2800_rfcsr_write(rt2x00dev, 54, 0x78);
7515         rt2800_rfcsr_write(rt2x00dev, 55, 0x44);
7516         if (rt2x00_rt_rev_gte(rt2x00dev, RT5390, REV_RT5390F))
7517                 rt2800_rfcsr_write(rt2x00dev, 56, 0x42);
7518         else
7519                 rt2800_rfcsr_write(rt2x00dev, 56, 0x22);
7520         rt2800_rfcsr_write(rt2x00dev, 57, 0x80);
7521         rt2800_rfcsr_write(rt2x00dev, 58, 0x7f);
7522         rt2800_rfcsr_write(rt2x00dev, 59, 0x8f);
7523
7524         rt2800_rfcsr_write(rt2x00dev, 60, 0x45);
7525         if (rt2x00_rt_rev_gte(rt2x00dev, RT5390, REV_RT5390F)) {
7526                 if (rt2x00_is_usb(rt2x00dev))
7527                         rt2800_rfcsr_write(rt2x00dev, 61, 0xd1);
7528                 else
7529                         rt2800_rfcsr_write(rt2x00dev, 61, 0xd5);
7530         } else {
7531                 if (rt2x00_is_usb(rt2x00dev))
7532                         rt2800_rfcsr_write(rt2x00dev, 61, 0xdd);
7533                 else
7534                         rt2800_rfcsr_write(rt2x00dev, 61, 0xb5);
7535         }
7536         rt2800_rfcsr_write(rt2x00dev, 62, 0x00);
7537         rt2800_rfcsr_write(rt2x00dev, 63, 0x00);
7538
7539         rt2800_normal_mode_setup_5xxx(rt2x00dev);
7540
7541         rt2800_led_open_drain_enable(rt2x00dev);
7542 }
7543
7544 static void rt2800_init_rfcsr_5392(struct rt2x00_dev *rt2x00dev)
7545 {
7546         rt2800_rf_init_calibration(rt2x00dev, 2);
7547
7548         rt2800_rfcsr_write(rt2x00dev, 1, 0x17);
7549         rt2800_rfcsr_write(rt2x00dev, 3, 0x88);
7550         rt2800_rfcsr_write(rt2x00dev, 5, 0x10);
7551         rt2800_rfcsr_write(rt2x00dev, 6, 0xe0);
7552         rt2800_rfcsr_write(rt2x00dev, 7, 0x00);
7553         rt2800_rfcsr_write(rt2x00dev, 10, 0x53);
7554         rt2800_rfcsr_write(rt2x00dev, 11, 0x4a);
7555         rt2800_rfcsr_write(rt2x00dev, 12, 0x46);
7556         rt2800_rfcsr_write(rt2x00dev, 13, 0x9f);
7557         rt2800_rfcsr_write(rt2x00dev, 14, 0x00);
7558         rt2800_rfcsr_write(rt2x00dev, 15, 0x00);
7559         rt2800_rfcsr_write(rt2x00dev, 16, 0x00);
7560         rt2800_rfcsr_write(rt2x00dev, 18, 0x03);
7561         rt2800_rfcsr_write(rt2x00dev, 19, 0x4d);
7562         rt2800_rfcsr_write(rt2x00dev, 20, 0x00);
7563         rt2800_rfcsr_write(rt2x00dev, 21, 0x8d);
7564         rt2800_rfcsr_write(rt2x00dev, 22, 0x20);
7565         rt2800_rfcsr_write(rt2x00dev, 23, 0x0b);
7566         rt2800_rfcsr_write(rt2x00dev, 24, 0x44);
7567         rt2800_rfcsr_write(rt2x00dev, 25, 0x80);
7568         rt2800_rfcsr_write(rt2x00dev, 26, 0x82);
7569         rt2800_rfcsr_write(rt2x00dev, 27, 0x09);
7570         rt2800_rfcsr_write(rt2x00dev, 28, 0x00);
7571         rt2800_rfcsr_write(rt2x00dev, 29, 0x10);
7572         rt2800_rfcsr_write(rt2x00dev, 30, 0x10);
7573         rt2800_rfcsr_write(rt2x00dev, 31, 0x80);
7574         rt2800_rfcsr_write(rt2x00dev, 32, 0x20);
7575         rt2800_rfcsr_write(rt2x00dev, 33, 0xC0);
7576         rt2800_rfcsr_write(rt2x00dev, 34, 0x07);
7577         rt2800_rfcsr_write(rt2x00dev, 35, 0x12);
7578         rt2800_rfcsr_write(rt2x00dev, 36, 0x00);
7579         rt2800_rfcsr_write(rt2x00dev, 37, 0x08);
7580         rt2800_rfcsr_write(rt2x00dev, 38, 0x89);
7581         rt2800_rfcsr_write(rt2x00dev, 39, 0x1b);
7582         rt2800_rfcsr_write(rt2x00dev, 40, 0x0f);
7583         rt2800_rfcsr_write(rt2x00dev, 41, 0xbb);
7584         rt2800_rfcsr_write(rt2x00dev, 42, 0xd5);
7585         rt2800_rfcsr_write(rt2x00dev, 43, 0x9b);
7586         rt2800_rfcsr_write(rt2x00dev, 44, 0x0e);
7587         rt2800_rfcsr_write(rt2x00dev, 45, 0xa2);
7588         rt2800_rfcsr_write(rt2x00dev, 46, 0x73);
7589         rt2800_rfcsr_write(rt2x00dev, 47, 0x0c);
7590         rt2800_rfcsr_write(rt2x00dev, 48, 0x10);
7591         rt2800_rfcsr_write(rt2x00dev, 49, 0x94);
7592         rt2800_rfcsr_write(rt2x00dev, 50, 0x94);
7593         rt2800_rfcsr_write(rt2x00dev, 51, 0x3a);
7594         rt2800_rfcsr_write(rt2x00dev, 52, 0x48);
7595         rt2800_rfcsr_write(rt2x00dev, 53, 0x44);
7596         rt2800_rfcsr_write(rt2x00dev, 54, 0x38);
7597         rt2800_rfcsr_write(rt2x00dev, 55, 0x43);
7598         rt2800_rfcsr_write(rt2x00dev, 56, 0xa1);
7599         rt2800_rfcsr_write(rt2x00dev, 57, 0x00);
7600         rt2800_rfcsr_write(rt2x00dev, 58, 0x39);
7601         rt2800_rfcsr_write(rt2x00dev, 59, 0x07);
7602         rt2800_rfcsr_write(rt2x00dev, 60, 0x45);
7603         rt2800_rfcsr_write(rt2x00dev, 61, 0x91);
7604         rt2800_rfcsr_write(rt2x00dev, 62, 0x39);
7605         rt2800_rfcsr_write(rt2x00dev, 63, 0x07);
7606
7607         rt2800_normal_mode_setup_5xxx(rt2x00dev);
7608
7609         rt2800_led_open_drain_enable(rt2x00dev);
7610 }
7611
7612 static void rt2800_init_rfcsr_5592(struct rt2x00_dev *rt2x00dev)
7613 {
7614         rt2800_rf_init_calibration(rt2x00dev, 30);
7615
7616         rt2800_rfcsr_write(rt2x00dev, 1, 0x3F);
7617         rt2800_rfcsr_write(rt2x00dev, 3, 0x08);
7618         rt2800_rfcsr_write(rt2x00dev, 5, 0x10);
7619         rt2800_rfcsr_write(rt2x00dev, 6, 0xE4);
7620         rt2800_rfcsr_write(rt2x00dev, 7, 0x00);
7621         rt2800_rfcsr_write(rt2x00dev, 14, 0x00);
7622         rt2800_rfcsr_write(rt2x00dev, 15, 0x00);
7623         rt2800_rfcsr_write(rt2x00dev, 16, 0x00);
7624         rt2800_rfcsr_write(rt2x00dev, 18, 0x03);
7625         rt2800_rfcsr_write(rt2x00dev, 19, 0x4D);
7626         rt2800_rfcsr_write(rt2x00dev, 20, 0x10);
7627         rt2800_rfcsr_write(rt2x00dev, 21, 0x8D);
7628         rt2800_rfcsr_write(rt2x00dev, 26, 0x82);
7629         rt2800_rfcsr_write(rt2x00dev, 28, 0x00);
7630         rt2800_rfcsr_write(rt2x00dev, 29, 0x10);
7631         rt2800_rfcsr_write(rt2x00dev, 33, 0xC0);
7632         rt2800_rfcsr_write(rt2x00dev, 34, 0x07);
7633         rt2800_rfcsr_write(rt2x00dev, 35, 0x12);
7634         rt2800_rfcsr_write(rt2x00dev, 47, 0x0C);
7635         rt2800_rfcsr_write(rt2x00dev, 53, 0x22);
7636         rt2800_rfcsr_write(rt2x00dev, 63, 0x07);
7637
7638         rt2800_rfcsr_write(rt2x00dev, 2, 0x80);
7639         msleep(1);
7640
7641         rt2800_freq_cal_mode1(rt2x00dev);
7642
7643         /* Enable DC filter */
7644         if (rt2x00_rt_rev_gte(rt2x00dev, RT5592, REV_RT5592C))
7645                 rt2800_bbp_write(rt2x00dev, 103, 0xc0);
7646
7647         rt2800_normal_mode_setup_5xxx(rt2x00dev);
7648
7649         if (rt2x00_rt_rev_lt(rt2x00dev, RT5592, REV_RT5592C))
7650                 rt2800_rfcsr_write(rt2x00dev, 27, 0x03);
7651
7652         rt2800_led_open_drain_enable(rt2x00dev);
7653 }
7654
7655 static void rt2800_bbp_core_soft_reset(struct rt2x00_dev *rt2x00dev,
7656                                        bool set_bw, bool is_ht40)
7657 {
7658         u8 bbp_val;
7659
7660         bbp_val = rt2800_bbp_read(rt2x00dev, 21);
7661         bbp_val |= 0x1;
7662         rt2800_bbp_write(rt2x00dev, 21, bbp_val);
7663         usleep_range(100, 200);
7664
7665         if (set_bw) {
7666                 bbp_val = rt2800_bbp_read(rt2x00dev, 4);
7667                 rt2x00_set_field8(&bbp_val, BBP4_BANDWIDTH, 2 * is_ht40);
7668                 rt2800_bbp_write(rt2x00dev, 4, bbp_val);
7669                 usleep_range(100, 200);
7670         }
7671
7672         bbp_val = rt2800_bbp_read(rt2x00dev, 21);
7673         bbp_val &= (~0x1);
7674         rt2800_bbp_write(rt2x00dev, 21, bbp_val);
7675         usleep_range(100, 200);
7676 }
7677
7678 static int rt2800_rf_lp_config(struct rt2x00_dev *rt2x00dev, bool btxcal)
7679 {
7680         u8 rf_val;
7681
7682         if (btxcal)
7683                 rt2800_register_write(rt2x00dev, RF_CONTROL0, 0x04);
7684         else
7685                 rt2800_register_write(rt2x00dev, RF_CONTROL0, 0x02);
7686
7687         rt2800_register_write(rt2x00dev, RF_BYPASS0, 0x06);
7688
7689         rf_val = rt2800_rfcsr_read_bank(rt2x00dev, 5, 17);
7690         rf_val |= 0x80;
7691         rt2800_rfcsr_write_bank(rt2x00dev, 5, 17, rf_val);
7692
7693         if (btxcal) {
7694                 rt2800_rfcsr_write_bank(rt2x00dev, 5, 18, 0xC1);
7695                 rt2800_rfcsr_write_bank(rt2x00dev, 5, 19, 0x20);
7696                 rt2800_rfcsr_write_bank(rt2x00dev, 5, 20, 0x02);
7697                 rf_val = rt2800_rfcsr_read_bank(rt2x00dev, 5, 3);
7698                 rf_val &= (~0x3F);
7699                 rf_val |= 0x3F;
7700                 rt2800_rfcsr_write_bank(rt2x00dev, 5, 3, rf_val);
7701                 rf_val = rt2800_rfcsr_read_bank(rt2x00dev, 5, 4);
7702                 rf_val &= (~0x3F);
7703                 rf_val |= 0x3F;
7704                 rt2800_rfcsr_write_bank(rt2x00dev, 5, 4, rf_val);
7705                 rt2800_rfcsr_write_bank(rt2x00dev, 5, 5, 0x31);
7706         } else {
7707                 rt2800_rfcsr_write_bank(rt2x00dev, 5, 18, 0xF1);
7708                 rt2800_rfcsr_write_bank(rt2x00dev, 5, 19, 0x18);
7709                 rt2800_rfcsr_write_bank(rt2x00dev, 5, 20, 0x02);
7710                 rf_val = rt2800_rfcsr_read_bank(rt2x00dev, 5, 3);
7711                 rf_val &= (~0x3F);
7712                 rf_val |= 0x34;
7713                 rt2800_rfcsr_write_bank(rt2x00dev, 5, 3, rf_val);
7714                 rf_val = rt2800_rfcsr_read_bank(rt2x00dev, 5, 4);
7715                 rf_val &= (~0x3F);
7716                 rf_val |= 0x34;
7717                 rt2800_rfcsr_write_bank(rt2x00dev, 5, 4, rf_val);
7718         }
7719
7720         return 0;
7721 }
7722
7723 static char rt2800_lp_tx_filter_bw_cal(struct rt2x00_dev *rt2x00dev)
7724 {
7725         unsigned int cnt;
7726         u8 bbp_val;
7727         char cal_val;
7728
7729         rt2800_bbp_dcoc_write(rt2x00dev, 0, 0x82);
7730
7731         cnt = 0;
7732         do {
7733                 usleep_range(500, 2000);
7734                 bbp_val = rt2800_bbp_read(rt2x00dev, 159);
7735                 if (bbp_val == 0x02 || cnt == 20)
7736                         break;
7737
7738                 cnt++;
7739         } while (cnt < 20);
7740
7741         bbp_val = rt2800_bbp_dcoc_read(rt2x00dev, 0x39);
7742         cal_val = bbp_val & 0x7F;
7743         if (cal_val >= 0x40)
7744                 cal_val -= 128;
7745
7746         return cal_val;
7747 }
7748
7749 static void rt2800_bw_filter_calibration(struct rt2x00_dev *rt2x00dev,
7750                                          bool btxcal)
7751 {
7752         struct rt2800_drv_data *drv_data = rt2x00dev->drv_data;
7753         u8 tx_agc_fc = 0, rx_agc_fc = 0, cmm_agc_fc;
7754         u8 filter_target;
7755         u8 tx_filter_target_20m = 0x09, tx_filter_target_40m = 0x02;
7756         u8 rx_filter_target_20m = 0x27, rx_filter_target_40m = 0x31;
7757         int loop = 0, is_ht40, cnt;
7758         u8 bbp_val, rf_val;
7759         char cal_r32_init, cal_r32_val, cal_diff;
7760         u8 saverfb5r00, saverfb5r01, saverfb5r03, saverfb5r04, saverfb5r05;
7761         u8 saverfb5r06, saverfb5r07;
7762         u8 saverfb5r08, saverfb5r17, saverfb5r18, saverfb5r19, saverfb5r20;
7763         u8 saverfb5r37, saverfb5r38, saverfb5r39, saverfb5r40, saverfb5r41;
7764         u8 saverfb5r42, saverfb5r43, saverfb5r44, saverfb5r45, saverfb5r46;
7765         u8 saverfb5r58, saverfb5r59;
7766         u8 savebbp159r0, savebbp159r2, savebbpr23;
7767         u32 MAC_RF_CONTROL0, MAC_RF_BYPASS0;
7768
7769         /* Save MAC registers */
7770         MAC_RF_CONTROL0 = rt2800_register_read(rt2x00dev, RF_CONTROL0);
7771         MAC_RF_BYPASS0 = rt2800_register_read(rt2x00dev, RF_BYPASS0);
7772
7773         /* save BBP registers */
7774         savebbpr23 = rt2800_bbp_read(rt2x00dev, 23);
7775
7776         savebbp159r0 = rt2800_bbp_dcoc_read(rt2x00dev, 0);
7777         savebbp159r2 = rt2800_bbp_dcoc_read(rt2x00dev, 2);
7778
7779         /* Save RF registers */
7780         saverfb5r00 = rt2800_rfcsr_read_bank(rt2x00dev, 5, 0);
7781         saverfb5r01 = rt2800_rfcsr_read_bank(rt2x00dev, 5, 1);
7782         saverfb5r03 = rt2800_rfcsr_read_bank(rt2x00dev, 5, 3);
7783         saverfb5r04 = rt2800_rfcsr_read_bank(rt2x00dev, 5, 4);
7784         saverfb5r05 = rt2800_rfcsr_read_bank(rt2x00dev, 5, 5);
7785         saverfb5r06 = rt2800_rfcsr_read_bank(rt2x00dev, 5, 6);
7786         saverfb5r07 = rt2800_rfcsr_read_bank(rt2x00dev, 5, 7);
7787         saverfb5r08 = rt2800_rfcsr_read_bank(rt2x00dev, 5, 8);
7788         saverfb5r17 = rt2800_rfcsr_read_bank(rt2x00dev, 5, 17);
7789         saverfb5r18 = rt2800_rfcsr_read_bank(rt2x00dev, 5, 18);
7790         saverfb5r19 = rt2800_rfcsr_read_bank(rt2x00dev, 5, 19);
7791         saverfb5r20 = rt2800_rfcsr_read_bank(rt2x00dev, 5, 20);
7792
7793         saverfb5r37 = rt2800_rfcsr_read_bank(rt2x00dev, 5, 37);
7794         saverfb5r38 = rt2800_rfcsr_read_bank(rt2x00dev, 5, 38);
7795         saverfb5r39 = rt2800_rfcsr_read_bank(rt2x00dev, 5, 39);
7796         saverfb5r40 = rt2800_rfcsr_read_bank(rt2x00dev, 5, 40);
7797         saverfb5r41 = rt2800_rfcsr_read_bank(rt2x00dev, 5, 41);
7798         saverfb5r42 = rt2800_rfcsr_read_bank(rt2x00dev, 5, 42);
7799         saverfb5r43 = rt2800_rfcsr_read_bank(rt2x00dev, 5, 43);
7800         saverfb5r44 = rt2800_rfcsr_read_bank(rt2x00dev, 5, 44);
7801         saverfb5r45 = rt2800_rfcsr_read_bank(rt2x00dev, 5, 45);
7802         saverfb5r46 = rt2800_rfcsr_read_bank(rt2x00dev, 5, 46);
7803
7804         saverfb5r58 = rt2800_rfcsr_read_bank(rt2x00dev, 5, 58);
7805         saverfb5r59 = rt2800_rfcsr_read_bank(rt2x00dev, 5, 59);
7806
7807         rf_val = rt2800_rfcsr_read_bank(rt2x00dev, 5, 0);
7808         rf_val |= 0x3;
7809         rt2800_rfcsr_write_bank(rt2x00dev, 5, 0, rf_val);
7810
7811         rf_val = rt2800_rfcsr_read_bank(rt2x00dev, 5, 1);
7812         rf_val |= 0x1;
7813         rt2800_rfcsr_write_bank(rt2x00dev, 5, 1, rf_val);
7814
7815         cnt = 0;
7816         do {
7817                 usleep_range(500, 2000);
7818                 rf_val = rt2800_rfcsr_read_bank(rt2x00dev, 5, 1);
7819                 if (((rf_val & 0x1) == 0x00) || (cnt == 40))
7820                         break;
7821                 cnt++;
7822         } while (cnt < 40);
7823
7824         rf_val = rt2800_rfcsr_read_bank(rt2x00dev, 5, 0);
7825         rf_val &= (~0x3);
7826         rf_val |= 0x1;
7827         rt2800_rfcsr_write_bank(rt2x00dev, 5, 0, rf_val);
7828
7829         /* I-3 */
7830         bbp_val = rt2800_bbp_read(rt2x00dev, 23);
7831         bbp_val &= (~0x1F);
7832         bbp_val |= 0x10;
7833         rt2800_bbp_write(rt2x00dev, 23, bbp_val);
7834
7835         do {
7836                 /* I-4,5,6,7,8,9 */
7837                 if (loop == 0) {
7838                         is_ht40 = false;
7839
7840                         if (btxcal)
7841                                 filter_target = tx_filter_target_20m;
7842                         else
7843                                 filter_target = rx_filter_target_20m;
7844                 } else {
7845                         is_ht40 = true;
7846
7847                         if (btxcal)
7848                                 filter_target = tx_filter_target_40m;
7849                         else
7850                                 filter_target = rx_filter_target_40m;
7851                 }
7852
7853                 rf_val = rt2800_rfcsr_read_bank(rt2x00dev, 5, 8);
7854                 rf_val &= (~0x04);
7855                 if (loop == 1)
7856                         rf_val |= 0x4;
7857
7858                 rt2800_rfcsr_write_bank(rt2x00dev, 5, 8, rf_val);
7859
7860                 rt2800_bbp_core_soft_reset(rt2x00dev, true, is_ht40);
7861
7862                 rt2800_rf_lp_config(rt2x00dev, btxcal);
7863                 if (btxcal) {
7864                         tx_agc_fc = 0;
7865                         rf_val = rt2800_rfcsr_read_bank(rt2x00dev, 5, 58);
7866                         rf_val &= (~0x7F);
7867                         rt2800_rfcsr_write_bank(rt2x00dev, 5, 58, rf_val);
7868                         rf_val = rt2800_rfcsr_read_bank(rt2x00dev, 5, 59);
7869                         rf_val &= (~0x7F);
7870                         rt2800_rfcsr_write_bank(rt2x00dev, 5, 59, rf_val);
7871                 } else {
7872                         rx_agc_fc = 0;
7873                         rf_val = rt2800_rfcsr_read_bank(rt2x00dev, 5, 6);
7874                         rf_val &= (~0x7F);
7875                         rt2800_rfcsr_write_bank(rt2x00dev, 5, 6, rf_val);
7876                         rf_val = rt2800_rfcsr_read_bank(rt2x00dev, 5, 7);
7877                         rf_val &= (~0x7F);
7878                         rt2800_rfcsr_write_bank(rt2x00dev, 5, 7, rf_val);
7879                 }
7880
7881                 usleep_range(1000, 2000);
7882
7883                 bbp_val = rt2800_bbp_dcoc_read(rt2x00dev, 2);
7884                 bbp_val &= (~0x6);
7885                 rt2800_bbp_dcoc_write(rt2x00dev, 2, bbp_val);
7886
7887                 rt2800_bbp_core_soft_reset(rt2x00dev, false, is_ht40);
7888
7889                 cal_r32_init = rt2800_lp_tx_filter_bw_cal(rt2x00dev);
7890
7891                 bbp_val = rt2800_bbp_dcoc_read(rt2x00dev, 2);
7892                 bbp_val |= 0x6;
7893                 rt2800_bbp_dcoc_write(rt2x00dev, 2, bbp_val);
7894 do_cal:
7895                 if (btxcal) {
7896                         rf_val = rt2800_rfcsr_read_bank(rt2x00dev, 5, 58);
7897                         rf_val &= (~0x7F);
7898                         rf_val |= tx_agc_fc;
7899                         rt2800_rfcsr_write_bank(rt2x00dev, 5, 58, rf_val);
7900                         rf_val = rt2800_rfcsr_read_bank(rt2x00dev, 5, 59);
7901                         rf_val &= (~0x7F);
7902                         rf_val |= tx_agc_fc;
7903                         rt2800_rfcsr_write_bank(rt2x00dev, 5, 59, rf_val);
7904                 } else {
7905                         rf_val = rt2800_rfcsr_read_bank(rt2x00dev, 5, 6);
7906                         rf_val &= (~0x7F);
7907                         rf_val |= rx_agc_fc;
7908                         rt2800_rfcsr_write_bank(rt2x00dev, 5, 6, rf_val);
7909                         rf_val = rt2800_rfcsr_read_bank(rt2x00dev, 5, 7);
7910                         rf_val &= (~0x7F);
7911                         rf_val |= rx_agc_fc;
7912                         rt2800_rfcsr_write_bank(rt2x00dev, 5, 7, rf_val);
7913                 }
7914
7915                 usleep_range(500, 1000);
7916
7917                 rt2800_bbp_core_soft_reset(rt2x00dev, false, is_ht40);
7918
7919                 cal_r32_val = rt2800_lp_tx_filter_bw_cal(rt2x00dev);
7920
7921                 cal_diff = cal_r32_init - cal_r32_val;
7922
7923                 if (btxcal)
7924                         cmm_agc_fc = tx_agc_fc;
7925                 else
7926                         cmm_agc_fc = rx_agc_fc;
7927
7928                 if (((cal_diff > filter_target) && (cmm_agc_fc == 0)) ||
7929                     ((cal_diff < filter_target) && (cmm_agc_fc == 0x3f))) {
7930                         if (btxcal)
7931                                 tx_agc_fc = 0;
7932                         else
7933                                 rx_agc_fc = 0;
7934                 } else if ((cal_diff <= filter_target) && (cmm_agc_fc < 0x3f)) {
7935                         if (btxcal)
7936                                 tx_agc_fc++;
7937                         else
7938                                 rx_agc_fc++;
7939                         goto do_cal;
7940                 }
7941
7942                 if (btxcal) {
7943                         if (loop == 0)
7944                                 drv_data->tx_calibration_bw20 = tx_agc_fc;
7945                         else
7946                                 drv_data->tx_calibration_bw40 = tx_agc_fc;
7947                 } else {
7948                         if (loop == 0)
7949                                 drv_data->rx_calibration_bw20 = rx_agc_fc;
7950                         else
7951                                 drv_data->rx_calibration_bw40 = rx_agc_fc;
7952                 }
7953
7954                 loop++;
7955         } while (loop <= 1);
7956
7957         rt2800_rfcsr_write_bank(rt2x00dev, 5, 0, saverfb5r00);
7958         rt2800_rfcsr_write_bank(rt2x00dev, 5, 1, saverfb5r01);
7959         rt2800_rfcsr_write_bank(rt2x00dev, 5, 3, saverfb5r03);
7960         rt2800_rfcsr_write_bank(rt2x00dev, 5, 4, saverfb5r04);
7961         rt2800_rfcsr_write_bank(rt2x00dev, 5, 5, saverfb5r05);
7962         rt2800_rfcsr_write_bank(rt2x00dev, 5, 6, saverfb5r06);
7963         rt2800_rfcsr_write_bank(rt2x00dev, 5, 7, saverfb5r07);
7964         rt2800_rfcsr_write_bank(rt2x00dev, 5, 8, saverfb5r08);
7965         rt2800_rfcsr_write_bank(rt2x00dev, 5, 17, saverfb5r17);
7966         rt2800_rfcsr_write_bank(rt2x00dev, 5, 18, saverfb5r18);
7967         rt2800_rfcsr_write_bank(rt2x00dev, 5, 19, saverfb5r19);
7968         rt2800_rfcsr_write_bank(rt2x00dev, 5, 20, saverfb5r20);
7969
7970         rt2800_rfcsr_write_bank(rt2x00dev, 5, 37, saverfb5r37);
7971         rt2800_rfcsr_write_bank(rt2x00dev, 5, 38, saverfb5r38);
7972         rt2800_rfcsr_write_bank(rt2x00dev, 5, 39, saverfb5r39);
7973         rt2800_rfcsr_write_bank(rt2x00dev, 5, 40, saverfb5r40);
7974         rt2800_rfcsr_write_bank(rt2x00dev, 5, 41, saverfb5r41);
7975         rt2800_rfcsr_write_bank(rt2x00dev, 5, 42, saverfb5r42);
7976         rt2800_rfcsr_write_bank(rt2x00dev, 5, 43, saverfb5r43);
7977         rt2800_rfcsr_write_bank(rt2x00dev, 5, 44, saverfb5r44);
7978         rt2800_rfcsr_write_bank(rt2x00dev, 5, 45, saverfb5r45);
7979         rt2800_rfcsr_write_bank(rt2x00dev, 5, 46, saverfb5r46);
7980
7981         rt2800_rfcsr_write_bank(rt2x00dev, 5, 58, saverfb5r58);
7982         rt2800_rfcsr_write_bank(rt2x00dev, 5, 59, saverfb5r59);
7983
7984         rt2800_bbp_write(rt2x00dev, 23, savebbpr23);
7985
7986         rt2800_bbp_dcoc_write(rt2x00dev, 0, savebbp159r0);
7987         rt2800_bbp_dcoc_write(rt2x00dev, 2, savebbp159r2);
7988
7989         bbp_val = rt2800_bbp_read(rt2x00dev, 4);
7990         rt2x00_set_field8(&bbp_val, BBP4_BANDWIDTH,
7991                           2 * test_bit(CONFIG_CHANNEL_HT40, &rt2x00dev->flags));
7992         rt2800_bbp_write(rt2x00dev, 4, bbp_val);
7993
7994         rt2800_register_write(rt2x00dev, RF_CONTROL0, MAC_RF_CONTROL0);
7995         rt2800_register_write(rt2x00dev, RF_BYPASS0, MAC_RF_BYPASS0);
7996 }
7997
7998 static void rt2800_init_rfcsr_6352(struct rt2x00_dev *rt2x00dev)
7999 {
8000         /* Initialize RF central register to default value */
8001         rt2800_rfcsr_write(rt2x00dev, 0, 0x02);
8002         rt2800_rfcsr_write(rt2x00dev, 1, 0x03);
8003         rt2800_rfcsr_write(rt2x00dev, 2, 0x33);
8004         rt2800_rfcsr_write(rt2x00dev, 3, 0xFF);
8005         rt2800_rfcsr_write(rt2x00dev, 4, 0x0C);
8006         rt2800_rfcsr_write(rt2x00dev, 5, 0x40);
8007         rt2800_rfcsr_write(rt2x00dev, 6, 0x00);
8008         rt2800_rfcsr_write(rt2x00dev, 7, 0x00);
8009         rt2800_rfcsr_write(rt2x00dev, 8, 0x00);
8010         rt2800_rfcsr_write(rt2x00dev, 9, 0x00);
8011         rt2800_rfcsr_write(rt2x00dev, 10, 0x00);
8012         rt2800_rfcsr_write(rt2x00dev, 11, 0x00);
8013         rt2800_rfcsr_write(rt2x00dev, 12, rt2x00dev->freq_offset);
8014         rt2800_rfcsr_write(rt2x00dev, 13, 0x00);
8015         rt2800_rfcsr_write(rt2x00dev, 14, 0x40);
8016         rt2800_rfcsr_write(rt2x00dev, 15, 0x22);
8017         rt2800_rfcsr_write(rt2x00dev, 16, 0x4C);
8018         rt2800_rfcsr_write(rt2x00dev, 17, 0x00);
8019         rt2800_rfcsr_write(rt2x00dev, 18, 0x00);
8020         rt2800_rfcsr_write(rt2x00dev, 19, 0x00);
8021         rt2800_rfcsr_write(rt2x00dev, 20, 0xA0);
8022         rt2800_rfcsr_write(rt2x00dev, 21, 0x12);
8023         rt2800_rfcsr_write(rt2x00dev, 22, 0x07);
8024         rt2800_rfcsr_write(rt2x00dev, 23, 0x13);
8025         rt2800_rfcsr_write(rt2x00dev, 24, 0xFE);
8026         rt2800_rfcsr_write(rt2x00dev, 25, 0x24);
8027         rt2800_rfcsr_write(rt2x00dev, 26, 0x7A);
8028         rt2800_rfcsr_write(rt2x00dev, 27, 0x00);
8029         rt2800_rfcsr_write(rt2x00dev, 28, 0x00);
8030         rt2800_rfcsr_write(rt2x00dev, 29, 0x05);
8031         rt2800_rfcsr_write(rt2x00dev, 30, 0x00);
8032         rt2800_rfcsr_write(rt2x00dev, 31, 0x00);
8033         rt2800_rfcsr_write(rt2x00dev, 32, 0x00);
8034         rt2800_rfcsr_write(rt2x00dev, 33, 0x00);
8035         rt2800_rfcsr_write(rt2x00dev, 34, 0x00);
8036         rt2800_rfcsr_write(rt2x00dev, 35, 0x00);
8037         rt2800_rfcsr_write(rt2x00dev, 36, 0x00);
8038         rt2800_rfcsr_write(rt2x00dev, 37, 0x00);
8039         rt2800_rfcsr_write(rt2x00dev, 38, 0x00);
8040         rt2800_rfcsr_write(rt2x00dev, 39, 0x00);
8041         rt2800_rfcsr_write(rt2x00dev, 40, 0x00);
8042         rt2800_rfcsr_write(rt2x00dev, 41, 0xD0);
8043         rt2800_rfcsr_write(rt2x00dev, 42, 0x5B);
8044         rt2800_rfcsr_write(rt2x00dev, 43, 0x00);
8045
8046         rt2800_rfcsr_write(rt2x00dev, 11, 0x21);
8047         if (rt2800_clk_is_20mhz(rt2x00dev))
8048                 rt2800_rfcsr_write(rt2x00dev, 13, 0x03);
8049         else
8050                 rt2800_rfcsr_write(rt2x00dev, 13, 0x00);
8051         rt2800_rfcsr_write(rt2x00dev, 14, 0x7C);
8052         rt2800_rfcsr_write(rt2x00dev, 16, 0x80);
8053         rt2800_rfcsr_write(rt2x00dev, 17, 0x99);
8054         rt2800_rfcsr_write(rt2x00dev, 18, 0x99);
8055         rt2800_rfcsr_write(rt2x00dev, 19, 0x09);
8056         rt2800_rfcsr_write(rt2x00dev, 20, 0x50);
8057         rt2800_rfcsr_write(rt2x00dev, 21, 0xB0);
8058         rt2800_rfcsr_write(rt2x00dev, 22, 0x00);
8059         rt2800_rfcsr_write(rt2x00dev, 23, 0x06);
8060         rt2800_rfcsr_write(rt2x00dev, 24, 0x00);
8061         rt2800_rfcsr_write(rt2x00dev, 25, 0x00);
8062         rt2800_rfcsr_write(rt2x00dev, 26, 0x5D);
8063         rt2800_rfcsr_write(rt2x00dev, 27, 0x00);
8064         rt2800_rfcsr_write(rt2x00dev, 28, 0x61);
8065         rt2800_rfcsr_write(rt2x00dev, 29, 0xB5);
8066         rt2800_rfcsr_write(rt2x00dev, 43, 0x02);
8067
8068         rt2800_rfcsr_write(rt2x00dev, 28, 0x62);
8069         rt2800_rfcsr_write(rt2x00dev, 29, 0xAD);
8070         rt2800_rfcsr_write(rt2x00dev, 39, 0x80);
8071
8072         /* Initialize RF channel register to default value */
8073         rt2800_rfcsr_write_chanreg(rt2x00dev, 0, 0x03);
8074         rt2800_rfcsr_write_chanreg(rt2x00dev, 1, 0x00);
8075         rt2800_rfcsr_write_chanreg(rt2x00dev, 2, 0x00);
8076         rt2800_rfcsr_write_chanreg(rt2x00dev, 3, 0x00);
8077         rt2800_rfcsr_write_chanreg(rt2x00dev, 4, 0x00);
8078         rt2800_rfcsr_write_chanreg(rt2x00dev, 5, 0x08);
8079         rt2800_rfcsr_write_chanreg(rt2x00dev, 6, 0x00);
8080         rt2800_rfcsr_write_chanreg(rt2x00dev, 7, 0x51);
8081         rt2800_rfcsr_write_chanreg(rt2x00dev, 8, 0x53);
8082         rt2800_rfcsr_write_chanreg(rt2x00dev, 9, 0x16);
8083         rt2800_rfcsr_write_chanreg(rt2x00dev, 10, 0x61);
8084         rt2800_rfcsr_write_chanreg(rt2x00dev, 11, 0x53);
8085         rt2800_rfcsr_write_chanreg(rt2x00dev, 12, 0x22);
8086         rt2800_rfcsr_write_chanreg(rt2x00dev, 13, 0x3D);
8087         rt2800_rfcsr_write_chanreg(rt2x00dev, 14, 0x06);
8088         rt2800_rfcsr_write_chanreg(rt2x00dev, 15, 0x13);
8089         rt2800_rfcsr_write_chanreg(rt2x00dev, 16, 0x22);
8090         rt2800_rfcsr_write_chanreg(rt2x00dev, 17, 0x27);
8091         rt2800_rfcsr_write_chanreg(rt2x00dev, 18, 0x02);
8092         rt2800_rfcsr_write_chanreg(rt2x00dev, 19, 0xA7);
8093         rt2800_rfcsr_write_chanreg(rt2x00dev, 20, 0x01);
8094         rt2800_rfcsr_write_chanreg(rt2x00dev, 21, 0x52);
8095         rt2800_rfcsr_write_chanreg(rt2x00dev, 22, 0x80);
8096         rt2800_rfcsr_write_chanreg(rt2x00dev, 23, 0xB3);
8097         rt2800_rfcsr_write_chanreg(rt2x00dev, 24, 0x00);
8098         rt2800_rfcsr_write_chanreg(rt2x00dev, 25, 0x00);
8099         rt2800_rfcsr_write_chanreg(rt2x00dev, 26, 0x00);
8100         rt2800_rfcsr_write_chanreg(rt2x00dev, 27, 0x00);
8101         rt2800_rfcsr_write_chanreg(rt2x00dev, 28, 0x5C);
8102         rt2800_rfcsr_write_chanreg(rt2x00dev, 29, 0x6B);
8103         rt2800_rfcsr_write_chanreg(rt2x00dev, 30, 0x6B);
8104         rt2800_rfcsr_write_chanreg(rt2x00dev, 31, 0x31);
8105         rt2800_rfcsr_write_chanreg(rt2x00dev, 32, 0x5D);
8106         rt2800_rfcsr_write_chanreg(rt2x00dev, 33, 0x00);
8107         rt2800_rfcsr_write_chanreg(rt2x00dev, 34, 0xE6);
8108         rt2800_rfcsr_write_chanreg(rt2x00dev, 35, 0x55);
8109         rt2800_rfcsr_write_chanreg(rt2x00dev, 36, 0x00);
8110         rt2800_rfcsr_write_chanreg(rt2x00dev, 37, 0xBB);
8111         rt2800_rfcsr_write_chanreg(rt2x00dev, 38, 0xB3);
8112         rt2800_rfcsr_write_chanreg(rt2x00dev, 39, 0xB3);
8113         rt2800_rfcsr_write_chanreg(rt2x00dev, 40, 0x03);
8114         rt2800_rfcsr_write_chanreg(rt2x00dev, 41, 0x00);
8115         rt2800_rfcsr_write_chanreg(rt2x00dev, 42, 0x00);
8116         rt2800_rfcsr_write_chanreg(rt2x00dev, 43, 0xB3);
8117         rt2800_rfcsr_write_chanreg(rt2x00dev, 44, 0xD3);
8118         rt2800_rfcsr_write_chanreg(rt2x00dev, 45, 0xD5);
8119         rt2800_rfcsr_write_chanreg(rt2x00dev, 46, 0x07);
8120         rt2800_rfcsr_write_chanreg(rt2x00dev, 47, 0x68);
8121         rt2800_rfcsr_write_chanreg(rt2x00dev, 48, 0xEF);
8122         rt2800_rfcsr_write_chanreg(rt2x00dev, 49, 0x1C);
8123         rt2800_rfcsr_write_chanreg(rt2x00dev, 54, 0x07);
8124         rt2800_rfcsr_write_chanreg(rt2x00dev, 55, 0xA8);
8125         rt2800_rfcsr_write_chanreg(rt2x00dev, 56, 0x85);
8126         rt2800_rfcsr_write_chanreg(rt2x00dev, 57, 0x10);
8127         rt2800_rfcsr_write_chanreg(rt2x00dev, 58, 0x07);
8128         rt2800_rfcsr_write_chanreg(rt2x00dev, 59, 0x6A);
8129         rt2800_rfcsr_write_chanreg(rt2x00dev, 60, 0x85);
8130         rt2800_rfcsr_write_chanreg(rt2x00dev, 61, 0x10);
8131         rt2800_rfcsr_write_chanreg(rt2x00dev, 62, 0x1C);
8132         rt2800_rfcsr_write_chanreg(rt2x00dev, 63, 0x00);
8133
8134         rt2800_rfcsr_write_bank(rt2x00dev, 6, 45, 0xC5);
8135
8136         rt2800_rfcsr_write_chanreg(rt2x00dev, 9, 0x47);
8137         rt2800_rfcsr_write_chanreg(rt2x00dev, 10, 0x71);
8138         rt2800_rfcsr_write_chanreg(rt2x00dev, 11, 0x33);
8139         rt2800_rfcsr_write_chanreg(rt2x00dev, 14, 0x0E);
8140         rt2800_rfcsr_write_chanreg(rt2x00dev, 17, 0x23);
8141         rt2800_rfcsr_write_chanreg(rt2x00dev, 19, 0xA4);
8142         rt2800_rfcsr_write_chanreg(rt2x00dev, 20, 0x02);
8143         rt2800_rfcsr_write_chanreg(rt2x00dev, 21, 0x12);
8144         rt2800_rfcsr_write_chanreg(rt2x00dev, 28, 0x1C);
8145         rt2800_rfcsr_write_chanreg(rt2x00dev, 29, 0xEB);
8146         rt2800_rfcsr_write_chanreg(rt2x00dev, 32, 0x7D);
8147         rt2800_rfcsr_write_chanreg(rt2x00dev, 34, 0xD6);
8148         rt2800_rfcsr_write_chanreg(rt2x00dev, 36, 0x08);
8149         rt2800_rfcsr_write_chanreg(rt2x00dev, 38, 0xB4);
8150         rt2800_rfcsr_write_chanreg(rt2x00dev, 43, 0xD3);
8151         rt2800_rfcsr_write_chanreg(rt2x00dev, 44, 0xB3);
8152         rt2800_rfcsr_write_chanreg(rt2x00dev, 45, 0xD5);
8153         rt2800_rfcsr_write_chanreg(rt2x00dev, 46, 0x27);
8154         rt2800_rfcsr_write_bank(rt2x00dev, 4, 47, 0x67);
8155         rt2800_rfcsr_write_bank(rt2x00dev, 6, 47, 0x69);
8156         rt2800_rfcsr_write_chanreg(rt2x00dev, 48, 0xFF);
8157         rt2800_rfcsr_write_bank(rt2x00dev, 4, 54, 0x27);
8158         rt2800_rfcsr_write_bank(rt2x00dev, 6, 54, 0x20);
8159         rt2800_rfcsr_write_chanreg(rt2x00dev, 55, 0x66);
8160         rt2800_rfcsr_write_chanreg(rt2x00dev, 56, 0xFF);
8161         rt2800_rfcsr_write_chanreg(rt2x00dev, 57, 0x1C);
8162         rt2800_rfcsr_write_chanreg(rt2x00dev, 58, 0x20);
8163         rt2800_rfcsr_write_chanreg(rt2x00dev, 59, 0x6B);
8164         rt2800_rfcsr_write_chanreg(rt2x00dev, 60, 0xF7);
8165         rt2800_rfcsr_write_chanreg(rt2x00dev, 61, 0x09);
8166
8167         rt2800_rfcsr_write_chanreg(rt2x00dev, 10, 0x51);
8168         rt2800_rfcsr_write_chanreg(rt2x00dev, 14, 0x06);
8169         rt2800_rfcsr_write_chanreg(rt2x00dev, 19, 0xA7);
8170         rt2800_rfcsr_write_chanreg(rt2x00dev, 28, 0x2C);
8171         rt2800_rfcsr_write_chanreg(rt2x00dev, 55, 0x64);
8172         rt2800_rfcsr_write_chanreg(rt2x00dev, 8, 0x51);
8173         rt2800_rfcsr_write_chanreg(rt2x00dev, 9, 0x36);
8174         rt2800_rfcsr_write_chanreg(rt2x00dev, 11, 0x53);
8175         rt2800_rfcsr_write_chanreg(rt2x00dev, 14, 0x16);
8176
8177         rt2800_rfcsr_write_chanreg(rt2x00dev, 47, 0x6C);
8178         rt2800_rfcsr_write_chanreg(rt2x00dev, 48, 0xFC);
8179         rt2800_rfcsr_write_chanreg(rt2x00dev, 49, 0x1F);
8180         rt2800_rfcsr_write_chanreg(rt2x00dev, 54, 0x27);
8181         rt2800_rfcsr_write_chanreg(rt2x00dev, 55, 0x66);
8182         rt2800_rfcsr_write_chanreg(rt2x00dev, 59, 0x6B);
8183
8184         /* Initialize RF channel register for DRQFN */
8185         rt2800_rfcsr_write_chanreg(rt2x00dev, 43, 0xD3);
8186         rt2800_rfcsr_write_chanreg(rt2x00dev, 44, 0xE3);
8187         rt2800_rfcsr_write_chanreg(rt2x00dev, 45, 0xE5);
8188         rt2800_rfcsr_write_chanreg(rt2x00dev, 47, 0x28);
8189         rt2800_rfcsr_write_chanreg(rt2x00dev, 55, 0x68);
8190         rt2800_rfcsr_write_chanreg(rt2x00dev, 56, 0xF7);
8191         rt2800_rfcsr_write_chanreg(rt2x00dev, 58, 0x02);
8192         rt2800_rfcsr_write_chanreg(rt2x00dev, 60, 0xC7);
8193
8194         /* Initialize RF DC calibration register to default value */
8195         rt2800_rfcsr_write_dccal(rt2x00dev, 0, 0x47);
8196         rt2800_rfcsr_write_dccal(rt2x00dev, 1, 0x00);
8197         rt2800_rfcsr_write_dccal(rt2x00dev, 2, 0x00);
8198         rt2800_rfcsr_write_dccal(rt2x00dev, 3, 0x00);
8199         rt2800_rfcsr_write_dccal(rt2x00dev, 4, 0x00);
8200         rt2800_rfcsr_write_dccal(rt2x00dev, 5, 0x00);
8201         rt2800_rfcsr_write_dccal(rt2x00dev, 6, 0x10);
8202         rt2800_rfcsr_write_dccal(rt2x00dev, 7, 0x10);
8203         rt2800_rfcsr_write_dccal(rt2x00dev, 8, 0x04);
8204         rt2800_rfcsr_write_dccal(rt2x00dev, 9, 0x00);
8205         rt2800_rfcsr_write_dccal(rt2x00dev, 10, 0x07);
8206         rt2800_rfcsr_write_dccal(rt2x00dev, 11, 0x01);
8207         rt2800_rfcsr_write_dccal(rt2x00dev, 12, 0x07);
8208         rt2800_rfcsr_write_dccal(rt2x00dev, 13, 0x07);
8209         rt2800_rfcsr_write_dccal(rt2x00dev, 14, 0x07);
8210         rt2800_rfcsr_write_dccal(rt2x00dev, 15, 0x20);
8211         rt2800_rfcsr_write_dccal(rt2x00dev, 16, 0x22);
8212         rt2800_rfcsr_write_dccal(rt2x00dev, 17, 0x00);
8213         rt2800_rfcsr_write_dccal(rt2x00dev, 18, 0x00);
8214         rt2800_rfcsr_write_dccal(rt2x00dev, 19, 0x00);
8215         rt2800_rfcsr_write_dccal(rt2x00dev, 20, 0x00);
8216         rt2800_rfcsr_write_dccal(rt2x00dev, 21, 0xF1);
8217         rt2800_rfcsr_write_dccal(rt2x00dev, 22, 0x11);
8218         rt2800_rfcsr_write_dccal(rt2x00dev, 23, 0x02);
8219         rt2800_rfcsr_write_dccal(rt2x00dev, 24, 0x41);
8220         rt2800_rfcsr_write_dccal(rt2x00dev, 25, 0x20);
8221         rt2800_rfcsr_write_dccal(rt2x00dev, 26, 0x00);
8222         rt2800_rfcsr_write_dccal(rt2x00dev, 27, 0xD7);
8223         rt2800_rfcsr_write_dccal(rt2x00dev, 28, 0xA2);
8224         rt2800_rfcsr_write_dccal(rt2x00dev, 29, 0x20);
8225         rt2800_rfcsr_write_dccal(rt2x00dev, 30, 0x49);
8226         rt2800_rfcsr_write_dccal(rt2x00dev, 31, 0x20);
8227         rt2800_rfcsr_write_dccal(rt2x00dev, 32, 0x04);
8228         rt2800_rfcsr_write_dccal(rt2x00dev, 33, 0xF1);
8229         rt2800_rfcsr_write_dccal(rt2x00dev, 34, 0xA1);
8230         rt2800_rfcsr_write_dccal(rt2x00dev, 35, 0x01);
8231         rt2800_rfcsr_write_dccal(rt2x00dev, 41, 0x00);
8232         rt2800_rfcsr_write_dccal(rt2x00dev, 42, 0x00);
8233         rt2800_rfcsr_write_dccal(rt2x00dev, 43, 0x00);
8234         rt2800_rfcsr_write_dccal(rt2x00dev, 44, 0x00);
8235         rt2800_rfcsr_write_dccal(rt2x00dev, 45, 0x00);
8236         rt2800_rfcsr_write_dccal(rt2x00dev, 46, 0x00);
8237         rt2800_rfcsr_write_dccal(rt2x00dev, 47, 0x3E);
8238         rt2800_rfcsr_write_dccal(rt2x00dev, 48, 0x3D);
8239         rt2800_rfcsr_write_dccal(rt2x00dev, 49, 0x3E);
8240         rt2800_rfcsr_write_dccal(rt2x00dev, 50, 0x3D);
8241         rt2800_rfcsr_write_dccal(rt2x00dev, 51, 0x3E);
8242         rt2800_rfcsr_write_dccal(rt2x00dev, 52, 0x3D);
8243         rt2800_rfcsr_write_dccal(rt2x00dev, 53, 0x00);
8244         rt2800_rfcsr_write_dccal(rt2x00dev, 54, 0x00);
8245         rt2800_rfcsr_write_dccal(rt2x00dev, 55, 0x00);
8246         rt2800_rfcsr_write_dccal(rt2x00dev, 56, 0x00);
8247         rt2800_rfcsr_write_dccal(rt2x00dev, 57, 0x00);
8248         rt2800_rfcsr_write_dccal(rt2x00dev, 58, 0x10);
8249         rt2800_rfcsr_write_dccal(rt2x00dev, 59, 0x10);
8250         rt2800_rfcsr_write_dccal(rt2x00dev, 60, 0x0A);
8251         rt2800_rfcsr_write_dccal(rt2x00dev, 61, 0x00);
8252         rt2800_rfcsr_write_dccal(rt2x00dev, 62, 0x00);
8253         rt2800_rfcsr_write_dccal(rt2x00dev, 63, 0x00);
8254
8255         rt2800_rfcsr_write_dccal(rt2x00dev, 3, 0x08);
8256         rt2800_rfcsr_write_dccal(rt2x00dev, 4, 0x04);
8257         rt2800_rfcsr_write_dccal(rt2x00dev, 5, 0x20);
8258
8259         rt2800_rfcsr_write_dccal(rt2x00dev, 5, 0x00);
8260         rt2800_rfcsr_write_dccal(rt2x00dev, 17, 0x7C);
8261
8262         rt2800_bw_filter_calibration(rt2x00dev, true);
8263         rt2800_bw_filter_calibration(rt2x00dev, false);
8264 }
8265
8266 static void rt2800_init_rfcsr(struct rt2x00_dev *rt2x00dev)
8267 {
8268         if (rt2800_is_305x_soc(rt2x00dev)) {
8269                 rt2800_init_rfcsr_305x_soc(rt2x00dev);
8270                 return;
8271         }
8272
8273         switch (rt2x00dev->chip.rt) {
8274         case RT3070:
8275         case RT3071:
8276         case RT3090:
8277                 rt2800_init_rfcsr_30xx(rt2x00dev);
8278                 break;
8279         case RT3290:
8280                 rt2800_init_rfcsr_3290(rt2x00dev);
8281                 break;
8282         case RT3352:
8283                 rt2800_init_rfcsr_3352(rt2x00dev);
8284                 break;
8285         case RT3390:
8286                 rt2800_init_rfcsr_3390(rt2x00dev);
8287                 break;
8288         case RT3572:
8289                 rt2800_init_rfcsr_3572(rt2x00dev);
8290                 break;
8291         case RT3593:
8292                 rt2800_init_rfcsr_3593(rt2x00dev);
8293                 break;
8294         case RT5350:
8295                 rt2800_init_rfcsr_5350(rt2x00dev);
8296                 break;
8297         case RT5390:
8298                 rt2800_init_rfcsr_5390(rt2x00dev);
8299                 break;
8300         case RT5392:
8301                 rt2800_init_rfcsr_5392(rt2x00dev);
8302                 break;
8303         case RT5592:
8304                 rt2800_init_rfcsr_5592(rt2x00dev);
8305                 break;
8306         case RT6352:
8307                 rt2800_init_rfcsr_6352(rt2x00dev);
8308                 break;
8309         }
8310 }
8311
8312 int rt2800_enable_radio(struct rt2x00_dev *rt2x00dev)
8313 {
8314         u32 reg;
8315         u16 word;
8316
8317         /*
8318          * Initialize MAC registers.
8319          */
8320         if (unlikely(rt2800_wait_wpdma_ready(rt2x00dev) ||
8321                      rt2800_init_registers(rt2x00dev)))
8322                 return -EIO;
8323
8324         /*
8325          * Wait BBP/RF to wake up.
8326          */
8327         if (unlikely(rt2800_wait_bbp_rf_ready(rt2x00dev)))
8328                 return -EIO;
8329
8330         /*
8331          * Send signal during boot time to initialize firmware.
8332          */
8333         rt2800_register_write(rt2x00dev, H2M_BBP_AGENT, 0);
8334         rt2800_register_write(rt2x00dev, H2M_MAILBOX_CSR, 0);
8335         if (rt2x00_is_usb(rt2x00dev))
8336                 rt2800_register_write(rt2x00dev, H2M_INT_SRC, 0);
8337         rt2800_mcu_request(rt2x00dev, MCU_BOOT_SIGNAL, 0, 0, 0);
8338         msleep(1);
8339
8340         /*
8341          * Make sure BBP is up and running.
8342          */
8343         if (unlikely(rt2800_wait_bbp_ready(rt2x00dev)))
8344                 return -EIO;
8345
8346         /*
8347          * Initialize BBP/RF registers.
8348          */
8349         rt2800_init_bbp(rt2x00dev);
8350         rt2800_init_rfcsr(rt2x00dev);
8351
8352         if (rt2x00_is_usb(rt2x00dev) &&
8353             (rt2x00_rt(rt2x00dev, RT3070) ||
8354              rt2x00_rt(rt2x00dev, RT3071) ||
8355              rt2x00_rt(rt2x00dev, RT3572))) {
8356                 udelay(200);
8357                 rt2800_mcu_request(rt2x00dev, MCU_CURRENT, 0, 0, 0);
8358                 udelay(10);
8359         }
8360
8361         /*
8362          * Enable RX.
8363          */
8364         reg = rt2800_register_read(rt2x00dev, MAC_SYS_CTRL);
8365         rt2x00_set_field32(&reg, MAC_SYS_CTRL_ENABLE_TX, 1);
8366         rt2x00_set_field32(&reg, MAC_SYS_CTRL_ENABLE_RX, 0);
8367         rt2800_register_write(rt2x00dev, MAC_SYS_CTRL, reg);
8368
8369         udelay(50);
8370
8371         reg = rt2800_register_read(rt2x00dev, WPDMA_GLO_CFG);
8372         rt2x00_set_field32(&reg, WPDMA_GLO_CFG_ENABLE_TX_DMA, 1);
8373         rt2x00_set_field32(&reg, WPDMA_GLO_CFG_ENABLE_RX_DMA, 1);
8374         rt2x00_set_field32(&reg, WPDMA_GLO_CFG_TX_WRITEBACK_DONE, 1);
8375         rt2800_register_write(rt2x00dev, WPDMA_GLO_CFG, reg);
8376
8377         reg = rt2800_register_read(rt2x00dev, MAC_SYS_CTRL);
8378         rt2x00_set_field32(&reg, MAC_SYS_CTRL_ENABLE_TX, 1);
8379         rt2x00_set_field32(&reg, MAC_SYS_CTRL_ENABLE_RX, 1);
8380         rt2800_register_write(rt2x00dev, MAC_SYS_CTRL, reg);
8381
8382         /*
8383          * Initialize LED control
8384          */
8385         word = rt2800_eeprom_read(rt2x00dev, EEPROM_LED_AG_CONF);
8386         rt2800_mcu_request(rt2x00dev, MCU_LED_AG_CONF, 0xff,
8387                            word & 0xff, (word >> 8) & 0xff);
8388
8389         word = rt2800_eeprom_read(rt2x00dev, EEPROM_LED_ACT_CONF);
8390         rt2800_mcu_request(rt2x00dev, MCU_LED_ACT_CONF, 0xff,
8391                            word & 0xff, (word >> 8) & 0xff);
8392
8393         word = rt2800_eeprom_read(rt2x00dev, EEPROM_LED_POLARITY);
8394         rt2800_mcu_request(rt2x00dev, MCU_LED_LED_POLARITY, 0xff,
8395                            word & 0xff, (word >> 8) & 0xff);
8396
8397         return 0;
8398 }
8399 EXPORT_SYMBOL_GPL(rt2800_enable_radio);
8400
8401 void rt2800_disable_radio(struct rt2x00_dev *rt2x00dev)
8402 {
8403         u32 reg;
8404
8405         rt2800_disable_wpdma(rt2x00dev);
8406
8407         /* Wait for DMA, ignore error */
8408         rt2800_wait_wpdma_ready(rt2x00dev);
8409
8410         reg = rt2800_register_read(rt2x00dev, MAC_SYS_CTRL);
8411         rt2x00_set_field32(&reg, MAC_SYS_CTRL_ENABLE_TX, 0);
8412         rt2x00_set_field32(&reg, MAC_SYS_CTRL_ENABLE_RX, 0);
8413         rt2800_register_write(rt2x00dev, MAC_SYS_CTRL, reg);
8414 }
8415 EXPORT_SYMBOL_GPL(rt2800_disable_radio);
8416
8417 int rt2800_efuse_detect(struct rt2x00_dev *rt2x00dev)
8418 {
8419         u32 reg;
8420         u16 efuse_ctrl_reg;
8421
8422         if (rt2x00_rt(rt2x00dev, RT3290))
8423                 efuse_ctrl_reg = EFUSE_CTRL_3290;
8424         else
8425                 efuse_ctrl_reg = EFUSE_CTRL;
8426
8427         reg = rt2800_register_read(rt2x00dev, efuse_ctrl_reg);
8428         return rt2x00_get_field32(reg, EFUSE_CTRL_PRESENT);
8429 }
8430 EXPORT_SYMBOL_GPL(rt2800_efuse_detect);
8431
8432 static void rt2800_efuse_read(struct rt2x00_dev *rt2x00dev, unsigned int i)
8433 {
8434         u32 reg;
8435         u16 efuse_ctrl_reg;
8436         u16 efuse_data0_reg;
8437         u16 efuse_data1_reg;
8438         u16 efuse_data2_reg;
8439         u16 efuse_data3_reg;
8440
8441         if (rt2x00_rt(rt2x00dev, RT3290)) {
8442                 efuse_ctrl_reg = EFUSE_CTRL_3290;
8443                 efuse_data0_reg = EFUSE_DATA0_3290;
8444                 efuse_data1_reg = EFUSE_DATA1_3290;
8445                 efuse_data2_reg = EFUSE_DATA2_3290;
8446                 efuse_data3_reg = EFUSE_DATA3_3290;
8447         } else {
8448                 efuse_ctrl_reg = EFUSE_CTRL;
8449                 efuse_data0_reg = EFUSE_DATA0;
8450                 efuse_data1_reg = EFUSE_DATA1;
8451                 efuse_data2_reg = EFUSE_DATA2;
8452                 efuse_data3_reg = EFUSE_DATA3;
8453         }
8454         mutex_lock(&rt2x00dev->csr_mutex);
8455
8456         reg = rt2800_register_read_lock(rt2x00dev, efuse_ctrl_reg);
8457         rt2x00_set_field32(&reg, EFUSE_CTRL_ADDRESS_IN, i);
8458         rt2x00_set_field32(&reg, EFUSE_CTRL_MODE, 0);
8459         rt2x00_set_field32(&reg, EFUSE_CTRL_KICK, 1);
8460         rt2800_register_write_lock(rt2x00dev, efuse_ctrl_reg, reg);
8461
8462         /* Wait until the EEPROM has been loaded */
8463         rt2800_regbusy_read(rt2x00dev, efuse_ctrl_reg, EFUSE_CTRL_KICK, &reg);
8464         /* Apparently the data is read from end to start */
8465         reg = rt2800_register_read_lock(rt2x00dev, efuse_data3_reg);
8466         /* The returned value is in CPU order, but eeprom is le */
8467         *(u32 *)&rt2x00dev->eeprom[i] = cpu_to_le32(reg);
8468         reg = rt2800_register_read_lock(rt2x00dev, efuse_data2_reg);
8469         *(u32 *)&rt2x00dev->eeprom[i + 2] = cpu_to_le32(reg);
8470         reg = rt2800_register_read_lock(rt2x00dev, efuse_data1_reg);
8471         *(u32 *)&rt2x00dev->eeprom[i + 4] = cpu_to_le32(reg);
8472         reg = rt2800_register_read_lock(rt2x00dev, efuse_data0_reg);
8473         *(u32 *)&rt2x00dev->eeprom[i + 6] = cpu_to_le32(reg);
8474
8475         mutex_unlock(&rt2x00dev->csr_mutex);
8476 }
8477
8478 int rt2800_read_eeprom_efuse(struct rt2x00_dev *rt2x00dev)
8479 {
8480         unsigned int i;
8481
8482         for (i = 0; i < EEPROM_SIZE / sizeof(u16); i += 8)
8483                 rt2800_efuse_read(rt2x00dev, i);
8484
8485         return 0;
8486 }
8487 EXPORT_SYMBOL_GPL(rt2800_read_eeprom_efuse);
8488
8489 static u8 rt2800_get_txmixer_gain_24g(struct rt2x00_dev *rt2x00dev)
8490 {
8491         u16 word;
8492
8493         if (rt2x00_rt(rt2x00dev, RT3593))
8494                 return 0;
8495
8496         word = rt2800_eeprom_read(rt2x00dev, EEPROM_TXMIXER_GAIN_BG);
8497         if ((word & 0x00ff) != 0x00ff)
8498                 return rt2x00_get_field16(word, EEPROM_TXMIXER_GAIN_BG_VAL);
8499
8500         return 0;
8501 }
8502
8503 static u8 rt2800_get_txmixer_gain_5g(struct rt2x00_dev *rt2x00dev)
8504 {
8505         u16 word;
8506
8507         if (rt2x00_rt(rt2x00dev, RT3593))
8508                 return 0;
8509
8510         word = rt2800_eeprom_read(rt2x00dev, EEPROM_TXMIXER_GAIN_A);
8511         if ((word & 0x00ff) != 0x00ff)
8512                 return rt2x00_get_field16(word, EEPROM_TXMIXER_GAIN_A_VAL);
8513
8514         return 0;
8515 }
8516
8517 static int rt2800_validate_eeprom(struct rt2x00_dev *rt2x00dev)
8518 {
8519         struct rt2800_drv_data *drv_data = rt2x00dev->drv_data;
8520         u16 word;
8521         u8 *mac;
8522         u8 default_lna_gain;
8523         int retval;
8524
8525         /*
8526          * Read the EEPROM.
8527          */
8528         retval = rt2800_read_eeprom(rt2x00dev);
8529         if (retval)
8530                 return retval;
8531
8532         /*
8533          * Start validation of the data that has been read.
8534          */
8535         mac = rt2800_eeprom_addr(rt2x00dev, EEPROM_MAC_ADDR_0);
8536         rt2x00lib_set_mac_address(rt2x00dev, mac);
8537
8538         word = rt2800_eeprom_read(rt2x00dev, EEPROM_NIC_CONF0);
8539         if (word == 0xffff) {
8540                 rt2x00_set_field16(&word, EEPROM_NIC_CONF0_RXPATH, 2);
8541                 rt2x00_set_field16(&word, EEPROM_NIC_CONF0_TXPATH, 1);
8542                 rt2x00_set_field16(&word, EEPROM_NIC_CONF0_RF_TYPE, RF2820);
8543                 rt2800_eeprom_write(rt2x00dev, EEPROM_NIC_CONF0, word);
8544                 rt2x00_eeprom_dbg(rt2x00dev, "Antenna: 0x%04x\n", word);
8545         } else if (rt2x00_rt(rt2x00dev, RT2860) ||
8546                    rt2x00_rt(rt2x00dev, RT2872)) {
8547                 /*
8548                  * There is a max of 2 RX streams for RT28x0 series
8549                  */
8550                 if (rt2x00_get_field16(word, EEPROM_NIC_CONF0_RXPATH) > 2)
8551                         rt2x00_set_field16(&word, EEPROM_NIC_CONF0_RXPATH, 2);
8552                 rt2800_eeprom_write(rt2x00dev, EEPROM_NIC_CONF0, word);
8553         }
8554
8555         word = rt2800_eeprom_read(rt2x00dev, EEPROM_NIC_CONF1);
8556         if (word == 0xffff) {
8557                 rt2x00_set_field16(&word, EEPROM_NIC_CONF1_HW_RADIO, 0);
8558                 rt2x00_set_field16(&word, EEPROM_NIC_CONF1_EXTERNAL_TX_ALC, 0);
8559                 rt2x00_set_field16(&word, EEPROM_NIC_CONF1_EXTERNAL_LNA_2G, 0);
8560                 rt2x00_set_field16(&word, EEPROM_NIC_CONF1_EXTERNAL_LNA_5G, 0);
8561                 rt2x00_set_field16(&word, EEPROM_NIC_CONF1_CARDBUS_ACCEL, 0);
8562                 rt2x00_set_field16(&word, EEPROM_NIC_CONF1_BW40M_SB_2G, 0);
8563                 rt2x00_set_field16(&word, EEPROM_NIC_CONF1_BW40M_SB_5G, 0);
8564                 rt2x00_set_field16(&word, EEPROM_NIC_CONF1_WPS_PBC, 0);
8565                 rt2x00_set_field16(&word, EEPROM_NIC_CONF1_BW40M_2G, 0);
8566                 rt2x00_set_field16(&word, EEPROM_NIC_CONF1_BW40M_5G, 0);
8567                 rt2x00_set_field16(&word, EEPROM_NIC_CONF1_BROADBAND_EXT_LNA, 0);
8568                 rt2x00_set_field16(&word, EEPROM_NIC_CONF1_ANT_DIVERSITY, 0);
8569                 rt2x00_set_field16(&word, EEPROM_NIC_CONF1_INTERNAL_TX_ALC, 0);
8570                 rt2x00_set_field16(&word, EEPROM_NIC_CONF1_BT_COEXIST, 0);
8571                 rt2x00_set_field16(&word, EEPROM_NIC_CONF1_DAC_TEST, 0);
8572                 rt2800_eeprom_write(rt2x00dev, EEPROM_NIC_CONF1, word);
8573                 rt2x00_eeprom_dbg(rt2x00dev, "NIC: 0x%04x\n", word);
8574         }
8575
8576         word = rt2800_eeprom_read(rt2x00dev, EEPROM_FREQ);
8577         if ((word & 0x00ff) == 0x00ff) {
8578                 rt2x00_set_field16(&word, EEPROM_FREQ_OFFSET, 0);
8579                 rt2800_eeprom_write(rt2x00dev, EEPROM_FREQ, word);
8580                 rt2x00_eeprom_dbg(rt2x00dev, "Freq: 0x%04x\n", word);
8581         }
8582         if ((word & 0xff00) == 0xff00) {
8583                 rt2x00_set_field16(&word, EEPROM_FREQ_LED_MODE,
8584                                    LED_MODE_TXRX_ACTIVITY);
8585                 rt2x00_set_field16(&word, EEPROM_FREQ_LED_POLARITY, 0);
8586                 rt2800_eeprom_write(rt2x00dev, EEPROM_FREQ, word);
8587                 rt2800_eeprom_write(rt2x00dev, EEPROM_LED_AG_CONF, 0x5555);
8588                 rt2800_eeprom_write(rt2x00dev, EEPROM_LED_ACT_CONF, 0x2221);
8589                 rt2800_eeprom_write(rt2x00dev, EEPROM_LED_POLARITY, 0xa9f8);
8590                 rt2x00_eeprom_dbg(rt2x00dev, "Led Mode: 0x%04x\n", word);
8591         }
8592
8593         /*
8594          * During the LNA validation we are going to use
8595          * lna0 as correct value. Note that EEPROM_LNA
8596          * is never validated.
8597          */
8598         word = rt2800_eeprom_read(rt2x00dev, EEPROM_LNA);
8599         default_lna_gain = rt2x00_get_field16(word, EEPROM_LNA_A0);
8600
8601         word = rt2800_eeprom_read(rt2x00dev, EEPROM_RSSI_BG);
8602         if (abs(rt2x00_get_field16(word, EEPROM_RSSI_BG_OFFSET0)) > 10)
8603                 rt2x00_set_field16(&word, EEPROM_RSSI_BG_OFFSET0, 0);
8604         if (abs(rt2x00_get_field16(word, EEPROM_RSSI_BG_OFFSET1)) > 10)
8605                 rt2x00_set_field16(&word, EEPROM_RSSI_BG_OFFSET1, 0);
8606         rt2800_eeprom_write(rt2x00dev, EEPROM_RSSI_BG, word);
8607
8608         drv_data->txmixer_gain_24g = rt2800_get_txmixer_gain_24g(rt2x00dev);
8609
8610         word = rt2800_eeprom_read(rt2x00dev, EEPROM_RSSI_BG2);
8611         if (abs(rt2x00_get_field16(word, EEPROM_RSSI_BG2_OFFSET2)) > 10)
8612                 rt2x00_set_field16(&word, EEPROM_RSSI_BG2_OFFSET2, 0);
8613         if (!rt2x00_rt(rt2x00dev, RT3593)) {
8614                 if (rt2x00_get_field16(word, EEPROM_RSSI_BG2_LNA_A1) == 0x00 ||
8615                     rt2x00_get_field16(word, EEPROM_RSSI_BG2_LNA_A1) == 0xff)
8616                         rt2x00_set_field16(&word, EEPROM_RSSI_BG2_LNA_A1,
8617                                            default_lna_gain);
8618         }
8619         rt2800_eeprom_write(rt2x00dev, EEPROM_RSSI_BG2, word);
8620
8621         drv_data->txmixer_gain_5g = rt2800_get_txmixer_gain_5g(rt2x00dev);
8622
8623         word = rt2800_eeprom_read(rt2x00dev, EEPROM_RSSI_A);
8624         if (abs(rt2x00_get_field16(word, EEPROM_RSSI_A_OFFSET0)) > 10)
8625                 rt2x00_set_field16(&word, EEPROM_RSSI_A_OFFSET0, 0);
8626         if (abs(rt2x00_get_field16(word, EEPROM_RSSI_A_OFFSET1)) > 10)
8627                 rt2x00_set_field16(&word, EEPROM_RSSI_A_OFFSET1, 0);
8628         rt2800_eeprom_write(rt2x00dev, EEPROM_RSSI_A, word);
8629
8630         word = rt2800_eeprom_read(rt2x00dev, EEPROM_RSSI_A2);
8631         if (abs(rt2x00_get_field16(word, EEPROM_RSSI_A2_OFFSET2)) > 10)
8632                 rt2x00_set_field16(&word, EEPROM_RSSI_A2_OFFSET2, 0);
8633         if (!rt2x00_rt(rt2x00dev, RT3593)) {
8634                 if (rt2x00_get_field16(word, EEPROM_RSSI_A2_LNA_A2) == 0x00 ||
8635                     rt2x00_get_field16(word, EEPROM_RSSI_A2_LNA_A2) == 0xff)
8636                         rt2x00_set_field16(&word, EEPROM_RSSI_A2_LNA_A2,
8637                                            default_lna_gain);
8638         }
8639         rt2800_eeprom_write(rt2x00dev, EEPROM_RSSI_A2, word);
8640
8641         if (rt2x00_rt(rt2x00dev, RT3593)) {
8642                 word = rt2800_eeprom_read(rt2x00dev, EEPROM_EXT_LNA2);
8643                 if (rt2x00_get_field16(word, EEPROM_EXT_LNA2_A1) == 0x00 ||
8644                     rt2x00_get_field16(word, EEPROM_EXT_LNA2_A1) == 0xff)
8645                         rt2x00_set_field16(&word, EEPROM_EXT_LNA2_A1,
8646                                            default_lna_gain);
8647                 if (rt2x00_get_field16(word, EEPROM_EXT_LNA2_A2) == 0x00 ||
8648                     rt2x00_get_field16(word, EEPROM_EXT_LNA2_A2) == 0xff)
8649                         rt2x00_set_field16(&word, EEPROM_EXT_LNA2_A1,
8650                                            default_lna_gain);
8651                 rt2800_eeprom_write(rt2x00dev, EEPROM_EXT_LNA2, word);
8652         }
8653
8654         return 0;
8655 }
8656
8657 static int rt2800_init_eeprom(struct rt2x00_dev *rt2x00dev)
8658 {
8659         u16 value;
8660         u16 eeprom;
8661         u16 rf;
8662
8663         /*
8664          * Read EEPROM word for configuration.
8665          */
8666         eeprom = rt2800_eeprom_read(rt2x00dev, EEPROM_NIC_CONF0);
8667
8668         /*
8669          * Identify RF chipset by EEPROM value
8670          * RT28xx/RT30xx: defined in "EEPROM_NIC_CONF0_RF_TYPE" field
8671          * RT53xx: defined in "EEPROM_CHIP_ID" field
8672          */
8673         if (rt2x00_rt(rt2x00dev, RT3290) ||
8674             rt2x00_rt(rt2x00dev, RT5390) ||
8675             rt2x00_rt(rt2x00dev, RT5392) ||
8676             rt2x00_rt(rt2x00dev, RT6352))
8677                 rf = rt2800_eeprom_read(rt2x00dev, EEPROM_CHIP_ID);
8678         else if (rt2x00_rt(rt2x00dev, RT3352))
8679                 rf = RF3322;
8680         else if (rt2x00_rt(rt2x00dev, RT5350))
8681                 rf = RF5350;
8682         else
8683                 rf = rt2x00_get_field16(eeprom, EEPROM_NIC_CONF0_RF_TYPE);
8684
8685         switch (rf) {
8686         case RF2820:
8687         case RF2850:
8688         case RF2720:
8689         case RF2750:
8690         case RF3020:
8691         case RF2020:
8692         case RF3021:
8693         case RF3022:
8694         case RF3052:
8695         case RF3053:
8696         case RF3070:
8697         case RF3290:
8698         case RF3320:
8699         case RF3322:
8700         case RF5350:
8701         case RF5360:
8702         case RF5362:
8703         case RF5370:
8704         case RF5372:
8705         case RF5390:
8706         case RF5392:
8707         case RF5592:
8708         case RF7620:
8709                 break;
8710         default:
8711                 rt2x00_err(rt2x00dev, "Invalid RF chipset 0x%04x detected\n",
8712                            rf);
8713                 return -ENODEV;
8714         }
8715
8716         rt2x00_set_rf(rt2x00dev, rf);
8717
8718         /*
8719          * Identify default antenna configuration.
8720          */
8721         rt2x00dev->default_ant.tx_chain_num =
8722             rt2x00_get_field16(eeprom, EEPROM_NIC_CONF0_TXPATH);
8723         rt2x00dev->default_ant.rx_chain_num =
8724             rt2x00_get_field16(eeprom, EEPROM_NIC_CONF0_RXPATH);
8725
8726         eeprom = rt2800_eeprom_read(rt2x00dev, EEPROM_NIC_CONF1);
8727
8728         if (rt2x00_rt(rt2x00dev, RT3070) ||
8729             rt2x00_rt(rt2x00dev, RT3090) ||
8730             rt2x00_rt(rt2x00dev, RT3352) ||
8731             rt2x00_rt(rt2x00dev, RT3390)) {
8732                 value = rt2x00_get_field16(eeprom,
8733                                 EEPROM_NIC_CONF1_ANT_DIVERSITY);
8734                 switch (value) {
8735                 case 0:
8736                 case 1:
8737                 case 2:
8738                         rt2x00dev->default_ant.tx = ANTENNA_A;
8739                         rt2x00dev->default_ant.rx = ANTENNA_A;
8740                         break;
8741                 case 3:
8742                         rt2x00dev->default_ant.tx = ANTENNA_A;
8743                         rt2x00dev->default_ant.rx = ANTENNA_B;
8744                         break;
8745                 }
8746         } else {
8747                 rt2x00dev->default_ant.tx = ANTENNA_A;
8748                 rt2x00dev->default_ant.rx = ANTENNA_A;
8749         }
8750
8751         if (rt2x00_rt_rev_gte(rt2x00dev, RT5390, REV_RT5390R)) {
8752                 rt2x00dev->default_ant.tx = ANTENNA_HW_DIVERSITY; /* Unused */
8753                 rt2x00dev->default_ant.rx = ANTENNA_HW_DIVERSITY; /* Unused */
8754         }
8755
8756         /*
8757          * Determine external LNA informations.
8758          */
8759         if (rt2x00_get_field16(eeprom, EEPROM_NIC_CONF1_EXTERNAL_LNA_5G))
8760                 __set_bit(CAPABILITY_EXTERNAL_LNA_A, &rt2x00dev->cap_flags);
8761         if (rt2x00_get_field16(eeprom, EEPROM_NIC_CONF1_EXTERNAL_LNA_2G))
8762                 __set_bit(CAPABILITY_EXTERNAL_LNA_BG, &rt2x00dev->cap_flags);
8763
8764         /*
8765          * Detect if this device has an hardware controlled radio.
8766          */
8767         if (rt2x00_get_field16(eeprom, EEPROM_NIC_CONF1_HW_RADIO))
8768                 __set_bit(CAPABILITY_HW_BUTTON, &rt2x00dev->cap_flags);
8769
8770         /*
8771          * Detect if this device has Bluetooth co-existence.
8772          */
8773         if (!rt2x00_rt(rt2x00dev, RT3352) &&
8774             rt2x00_get_field16(eeprom, EEPROM_NIC_CONF1_BT_COEXIST))
8775                 __set_bit(CAPABILITY_BT_COEXIST, &rt2x00dev->cap_flags);
8776
8777         /*
8778          * Read frequency offset and RF programming sequence.
8779          */
8780         eeprom = rt2800_eeprom_read(rt2x00dev, EEPROM_FREQ);
8781         rt2x00dev->freq_offset = rt2x00_get_field16(eeprom, EEPROM_FREQ_OFFSET);
8782
8783         /*
8784          * Store led settings, for correct led behaviour.
8785          */
8786 #ifdef CONFIG_RT2X00_LIB_LEDS
8787         rt2800_init_led(rt2x00dev, &rt2x00dev->led_radio, LED_TYPE_RADIO);
8788         rt2800_init_led(rt2x00dev, &rt2x00dev->led_assoc, LED_TYPE_ASSOC);
8789         rt2800_init_led(rt2x00dev, &rt2x00dev->led_qual, LED_TYPE_QUALITY);
8790
8791         rt2x00dev->led_mcu_reg = eeprom;
8792 #endif /* CONFIG_RT2X00_LIB_LEDS */
8793
8794         /*
8795          * Check if support EIRP tx power limit feature.
8796          */
8797         eeprom = rt2800_eeprom_read(rt2x00dev, EEPROM_EIRP_MAX_TX_POWER);
8798
8799         if (rt2x00_get_field16(eeprom, EEPROM_EIRP_MAX_TX_POWER_2GHZ) <
8800                                         EIRP_MAX_TX_POWER_LIMIT)
8801                 __set_bit(CAPABILITY_POWER_LIMIT, &rt2x00dev->cap_flags);
8802
8803         /*
8804          * Detect if device uses internal or external PA
8805          */
8806         eeprom = rt2800_eeprom_read(rt2x00dev, EEPROM_NIC_CONF1);
8807
8808         if (rt2x00_rt(rt2x00dev, RT3352)) {
8809                 if (rt2x00_get_field16(eeprom,
8810                     EEPROM_NIC_CONF1_EXTERNAL_TX0_PA_3352))
8811                     __set_bit(CAPABILITY_EXTERNAL_PA_TX0,
8812                               &rt2x00dev->cap_flags);
8813                 if (rt2x00_get_field16(eeprom,
8814                     EEPROM_NIC_CONF1_EXTERNAL_TX1_PA_3352))
8815                     __set_bit(CAPABILITY_EXTERNAL_PA_TX1,
8816                               &rt2x00dev->cap_flags);
8817         }
8818
8819         return 0;
8820 }
8821
8822 /*
8823  * RF value list for rt28xx
8824  * Supports: 2.4 GHz (all) & 5.2 GHz (RF2850 & RF2750)
8825  */
8826 static const struct rf_channel rf_vals[] = {
8827         { 1,  0x18402ecc, 0x184c0786, 0x1816b455, 0x1800510b },
8828         { 2,  0x18402ecc, 0x184c0786, 0x18168a55, 0x1800519f },
8829         { 3,  0x18402ecc, 0x184c078a, 0x18168a55, 0x1800518b },
8830         { 4,  0x18402ecc, 0x184c078a, 0x18168a55, 0x1800519f },
8831         { 5,  0x18402ecc, 0x184c078e, 0x18168a55, 0x1800518b },
8832         { 6,  0x18402ecc, 0x184c078e, 0x18168a55, 0x1800519f },
8833         { 7,  0x18402ecc, 0x184c0792, 0x18168a55, 0x1800518b },
8834         { 8,  0x18402ecc, 0x184c0792, 0x18168a55, 0x1800519f },
8835         { 9,  0x18402ecc, 0x184c0796, 0x18168a55, 0x1800518b },
8836         { 10, 0x18402ecc, 0x184c0796, 0x18168a55, 0x1800519f },
8837         { 11, 0x18402ecc, 0x184c079a, 0x18168a55, 0x1800518b },
8838         { 12, 0x18402ecc, 0x184c079a, 0x18168a55, 0x1800519f },
8839         { 13, 0x18402ecc, 0x184c079e, 0x18168a55, 0x1800518b },
8840         { 14, 0x18402ecc, 0x184c07a2, 0x18168a55, 0x18005193 },
8841
8842         /* 802.11 UNI / HyperLan 2 */
8843         { 36, 0x18402ecc, 0x184c099a, 0x18158a55, 0x180ed1a3 },
8844         { 38, 0x18402ecc, 0x184c099e, 0x18158a55, 0x180ed193 },
8845         { 40, 0x18402ec8, 0x184c0682, 0x18158a55, 0x180ed183 },
8846         { 44, 0x18402ec8, 0x184c0682, 0x18158a55, 0x180ed1a3 },
8847         { 46, 0x18402ec8, 0x184c0686, 0x18158a55, 0x180ed18b },
8848         { 48, 0x18402ec8, 0x184c0686, 0x18158a55, 0x180ed19b },
8849         { 52, 0x18402ec8, 0x184c068a, 0x18158a55, 0x180ed193 },
8850         { 54, 0x18402ec8, 0x184c068a, 0x18158a55, 0x180ed1a3 },
8851         { 56, 0x18402ec8, 0x184c068e, 0x18158a55, 0x180ed18b },
8852         { 60, 0x18402ec8, 0x184c0692, 0x18158a55, 0x180ed183 },
8853         { 62, 0x18402ec8, 0x184c0692, 0x18158a55, 0x180ed193 },
8854         { 64, 0x18402ec8, 0x184c0692, 0x18158a55, 0x180ed1a3 },
8855
8856         /* 802.11 HyperLan 2 */
8857         { 100, 0x18402ec8, 0x184c06b2, 0x18178a55, 0x180ed783 },
8858         { 102, 0x18402ec8, 0x184c06b2, 0x18578a55, 0x180ed793 },
8859         { 104, 0x18402ec8, 0x185c06b2, 0x18578a55, 0x180ed1a3 },
8860         { 108, 0x18402ecc, 0x185c0a32, 0x18578a55, 0x180ed193 },
8861         { 110, 0x18402ecc, 0x184c0a36, 0x18178a55, 0x180ed183 },
8862         { 112, 0x18402ecc, 0x184c0a36, 0x18178a55, 0x180ed19b },
8863         { 116, 0x18402ecc, 0x184c0a3a, 0x18178a55, 0x180ed1a3 },
8864         { 118, 0x18402ecc, 0x184c0a3e, 0x18178a55, 0x180ed193 },
8865         { 120, 0x18402ec4, 0x184c0382, 0x18178a55, 0x180ed183 },
8866         { 124, 0x18402ec4, 0x184c0382, 0x18178a55, 0x180ed193 },
8867         { 126, 0x18402ec4, 0x184c0382, 0x18178a55, 0x180ed15b },
8868         { 128, 0x18402ec4, 0x184c0382, 0x18178a55, 0x180ed1a3 },
8869         { 132, 0x18402ec4, 0x184c0386, 0x18178a55, 0x180ed18b },
8870         { 134, 0x18402ec4, 0x184c0386, 0x18178a55, 0x180ed193 },
8871         { 136, 0x18402ec4, 0x184c0386, 0x18178a55, 0x180ed19b },
8872         { 140, 0x18402ec4, 0x184c038a, 0x18178a55, 0x180ed183 },
8873
8874         /* 802.11 UNII */
8875         { 149, 0x18402ec4, 0x184c038a, 0x18178a55, 0x180ed1a7 },
8876         { 151, 0x18402ec4, 0x184c038e, 0x18178a55, 0x180ed187 },
8877         { 153, 0x18402ec4, 0x184c038e, 0x18178a55, 0x180ed18f },
8878         { 157, 0x18402ec4, 0x184c038e, 0x18178a55, 0x180ed19f },
8879         { 159, 0x18402ec4, 0x184c038e, 0x18178a55, 0x180ed1a7 },
8880         { 161, 0x18402ec4, 0x184c0392, 0x18178a55, 0x180ed187 },
8881         { 165, 0x18402ec4, 0x184c0392, 0x18178a55, 0x180ed197 },
8882         { 167, 0x18402ec4, 0x184c03d2, 0x18179855, 0x1815531f },
8883         { 169, 0x18402ec4, 0x184c03d2, 0x18179855, 0x18155327 },
8884         { 171, 0x18402ec4, 0x184c03d6, 0x18179855, 0x18155307 },
8885         { 173, 0x18402ec4, 0x184c03d6, 0x18179855, 0x1815530f },
8886
8887         /* 802.11 Japan */
8888         { 184, 0x15002ccc, 0x1500491e, 0x1509be55, 0x150c0a0b },
8889         { 188, 0x15002ccc, 0x15004922, 0x1509be55, 0x150c0a13 },
8890         { 192, 0x15002ccc, 0x15004926, 0x1509be55, 0x150c0a1b },
8891         { 196, 0x15002ccc, 0x1500492a, 0x1509be55, 0x150c0a23 },
8892         { 208, 0x15002ccc, 0x1500493a, 0x1509be55, 0x150c0a13 },
8893         { 212, 0x15002ccc, 0x1500493e, 0x1509be55, 0x150c0a1b },
8894         { 216, 0x15002ccc, 0x15004982, 0x1509be55, 0x150c0a23 },
8895 };
8896
8897 /*
8898  * RF value list for rt3xxx
8899  * Supports: 2.4 GHz (all) & 5.2 GHz (RF3052 & RF3053)
8900  */
8901 static const struct rf_channel rf_vals_3x[] = {
8902         {1,  241, 2, 2 },
8903         {2,  241, 2, 7 },
8904         {3,  242, 2, 2 },
8905         {4,  242, 2, 7 },
8906         {5,  243, 2, 2 },
8907         {6,  243, 2, 7 },
8908         {7,  244, 2, 2 },
8909         {8,  244, 2, 7 },
8910         {9,  245, 2, 2 },
8911         {10, 245, 2, 7 },
8912         {11, 246, 2, 2 },
8913         {12, 246, 2, 7 },
8914         {13, 247, 2, 2 },
8915         {14, 248, 2, 4 },
8916
8917         /* 802.11 UNI / HyperLan 2 */
8918         {36, 0x56, 0, 4},
8919         {38, 0x56, 0, 6},
8920         {40, 0x56, 0, 8},
8921         {44, 0x57, 0, 0},
8922         {46, 0x57, 0, 2},
8923         {48, 0x57, 0, 4},
8924         {52, 0x57, 0, 8},
8925         {54, 0x57, 0, 10},
8926         {56, 0x58, 0, 0},
8927         {60, 0x58, 0, 4},
8928         {62, 0x58, 0, 6},
8929         {64, 0x58, 0, 8},
8930
8931         /* 802.11 HyperLan 2 */
8932         {100, 0x5b, 0, 8},
8933         {102, 0x5b, 0, 10},
8934         {104, 0x5c, 0, 0},
8935         {108, 0x5c, 0, 4},
8936         {110, 0x5c, 0, 6},
8937         {112, 0x5c, 0, 8},
8938         {116, 0x5d, 0, 0},
8939         {118, 0x5d, 0, 2},
8940         {120, 0x5d, 0, 4},
8941         {124, 0x5d, 0, 8},
8942         {126, 0x5d, 0, 10},
8943         {128, 0x5e, 0, 0},
8944         {132, 0x5e, 0, 4},
8945         {134, 0x5e, 0, 6},
8946         {136, 0x5e, 0, 8},
8947         {140, 0x5f, 0, 0},
8948
8949         /* 802.11 UNII */
8950         {149, 0x5f, 0, 9},
8951         {151, 0x5f, 0, 11},
8952         {153, 0x60, 0, 1},
8953         {157, 0x60, 0, 5},
8954         {159, 0x60, 0, 7},
8955         {161, 0x60, 0, 9},
8956         {165, 0x61, 0, 1},
8957         {167, 0x61, 0, 3},
8958         {169, 0x61, 0, 5},
8959         {171, 0x61, 0, 7},
8960         {173, 0x61, 0, 9},
8961 };
8962
8963 /*
8964  * RF value list for rt3xxx with Xtal20MHz
8965  * Supports: 2.4 GHz (all) (RF3322)
8966  */
8967 static const struct rf_channel rf_vals_3x_xtal20[] = {
8968         {1,    0xE2,     2,  0x14},
8969         {2,    0xE3,     2,  0x14},
8970         {3,    0xE4,     2,  0x14},
8971         {4,    0xE5,     2,  0x14},
8972         {5,    0xE6,     2,  0x14},
8973         {6,    0xE7,     2,  0x14},
8974         {7,    0xE8,     2,  0x14},
8975         {8,    0xE9,     2,  0x14},
8976         {9,    0xEA,     2,  0x14},
8977         {10,   0xEB,     2,  0x14},
8978         {11,   0xEC,     2,  0x14},
8979         {12,   0xED,     2,  0x14},
8980         {13,   0xEE,     2,  0x14},
8981         {14,   0xF0,     2,  0x18},
8982 };
8983
8984 static const struct rf_channel rf_vals_5592_xtal20[] = {
8985         /* Channel, N, K, mod, R */
8986         {1, 482, 4, 10, 3},
8987         {2, 483, 4, 10, 3},
8988         {3, 484, 4, 10, 3},
8989         {4, 485, 4, 10, 3},
8990         {5, 486, 4, 10, 3},
8991         {6, 487, 4, 10, 3},
8992         {7, 488, 4, 10, 3},
8993         {8, 489, 4, 10, 3},
8994         {9, 490, 4, 10, 3},
8995         {10, 491, 4, 10, 3},
8996         {11, 492, 4, 10, 3},
8997         {12, 493, 4, 10, 3},
8998         {13, 494, 4, 10, 3},
8999         {14, 496, 8, 10, 3},
9000         {36, 172, 8, 12, 1},
9001         {38, 173, 0, 12, 1},
9002         {40, 173, 4, 12, 1},
9003         {42, 173, 8, 12, 1},
9004         {44, 174, 0, 12, 1},
9005         {46, 174, 4, 12, 1},
9006         {48, 174, 8, 12, 1},
9007         {50, 175, 0, 12, 1},
9008         {52, 175, 4, 12, 1},
9009         {54, 175, 8, 12, 1},
9010         {56, 176, 0, 12, 1},
9011         {58, 176, 4, 12, 1},
9012         {60, 176, 8, 12, 1},
9013         {62, 177, 0, 12, 1},
9014         {64, 177, 4, 12, 1},
9015         {100, 183, 4, 12, 1},
9016         {102, 183, 8, 12, 1},
9017         {104, 184, 0, 12, 1},
9018         {106, 184, 4, 12, 1},
9019         {108, 184, 8, 12, 1},
9020         {110, 185, 0, 12, 1},
9021         {112, 185, 4, 12, 1},
9022         {114, 185, 8, 12, 1},
9023         {116, 186, 0, 12, 1},
9024         {118, 186, 4, 12, 1},
9025         {120, 186, 8, 12, 1},
9026         {122, 187, 0, 12, 1},
9027         {124, 187, 4, 12, 1},
9028         {126, 187, 8, 12, 1},
9029         {128, 188, 0, 12, 1},
9030         {130, 188, 4, 12, 1},
9031         {132, 188, 8, 12, 1},
9032         {134, 189, 0, 12, 1},
9033         {136, 189, 4, 12, 1},
9034         {138, 189, 8, 12, 1},
9035         {140, 190, 0, 12, 1},
9036         {149, 191, 6, 12, 1},
9037         {151, 191, 10, 12, 1},
9038         {153, 192, 2, 12, 1},
9039         {155, 192, 6, 12, 1},
9040         {157, 192, 10, 12, 1},
9041         {159, 193, 2, 12, 1},
9042         {161, 193, 6, 12, 1},
9043         {165, 194, 2, 12, 1},
9044         {184, 164, 0, 12, 1},
9045         {188, 164, 4, 12, 1},
9046         {192, 165, 8, 12, 1},
9047         {196, 166, 0, 12, 1},
9048 };
9049
9050 static const struct rf_channel rf_vals_5592_xtal40[] = {
9051         /* Channel, N, K, mod, R */
9052         {1, 241, 2, 10, 3},
9053         {2, 241, 7, 10, 3},
9054         {3, 242, 2, 10, 3},
9055         {4, 242, 7, 10, 3},
9056         {5, 243, 2, 10, 3},
9057         {6, 243, 7, 10, 3},
9058         {7, 244, 2, 10, 3},
9059         {8, 244, 7, 10, 3},
9060         {9, 245, 2, 10, 3},
9061         {10, 245, 7, 10, 3},
9062         {11, 246, 2, 10, 3},
9063         {12, 246, 7, 10, 3},
9064         {13, 247, 2, 10, 3},
9065         {14, 248, 4, 10, 3},
9066         {36, 86, 4, 12, 1},
9067         {38, 86, 6, 12, 1},
9068         {40, 86, 8, 12, 1},
9069         {42, 86, 10, 12, 1},
9070         {44, 87, 0, 12, 1},
9071         {46, 87, 2, 12, 1},
9072         {48, 87, 4, 12, 1},
9073         {50, 87, 6, 12, 1},
9074         {52, 87, 8, 12, 1},
9075         {54, 87, 10, 12, 1},
9076         {56, 88, 0, 12, 1},
9077         {58, 88, 2, 12, 1},
9078         {60, 88, 4, 12, 1},
9079         {62, 88, 6, 12, 1},
9080         {64, 88, 8, 12, 1},
9081         {100, 91, 8, 12, 1},
9082         {102, 91, 10, 12, 1},
9083         {104, 92, 0, 12, 1},
9084         {106, 92, 2, 12, 1},
9085         {108, 92, 4, 12, 1},
9086         {110, 92, 6, 12, 1},
9087         {112, 92, 8, 12, 1},
9088         {114, 92, 10, 12, 1},
9089         {116, 93, 0, 12, 1},
9090         {118, 93, 2, 12, 1},
9091         {120, 93, 4, 12, 1},
9092         {122, 93, 6, 12, 1},
9093         {124, 93, 8, 12, 1},
9094         {126, 93, 10, 12, 1},
9095         {128, 94, 0, 12, 1},
9096         {130, 94, 2, 12, 1},
9097         {132, 94, 4, 12, 1},
9098         {134, 94, 6, 12, 1},
9099         {136, 94, 8, 12, 1},
9100         {138, 94, 10, 12, 1},
9101         {140, 95, 0, 12, 1},
9102         {149, 95, 9, 12, 1},
9103         {151, 95, 11, 12, 1},
9104         {153, 96, 1, 12, 1},
9105         {155, 96, 3, 12, 1},
9106         {157, 96, 5, 12, 1},
9107         {159, 96, 7, 12, 1},
9108         {161, 96, 9, 12, 1},
9109         {165, 97, 1, 12, 1},
9110         {184, 82, 0, 12, 1},
9111         {188, 82, 4, 12, 1},
9112         {192, 82, 8, 12, 1},
9113         {196, 83, 0, 12, 1},
9114 };
9115
9116 static const struct rf_channel rf_vals_7620[] = {
9117         {1, 0x50, 0x99, 0x99, 1},
9118         {2, 0x50, 0x44, 0x44, 2},
9119         {3, 0x50, 0xEE, 0xEE, 2},
9120         {4, 0x50, 0x99, 0x99, 3},
9121         {5, 0x51, 0x44, 0x44, 0},
9122         {6, 0x51, 0xEE, 0xEE, 0},
9123         {7, 0x51, 0x99, 0x99, 1},
9124         {8, 0x51, 0x44, 0x44, 2},
9125         {9, 0x51, 0xEE, 0xEE, 2},
9126         {10, 0x51, 0x99, 0x99, 3},
9127         {11, 0x52, 0x44, 0x44, 0},
9128         {12, 0x52, 0xEE, 0xEE, 0},
9129         {13, 0x52, 0x99, 0x99, 1},
9130         {14, 0x52, 0x33, 0x33, 3},
9131 };
9132
9133 static int rt2800_probe_hw_mode(struct rt2x00_dev *rt2x00dev)
9134 {
9135         struct hw_mode_spec *spec = &rt2x00dev->spec;
9136         struct channel_info *info;
9137         char *default_power1;
9138         char *default_power2;
9139         char *default_power3;
9140         unsigned int i, tx_chains, rx_chains;
9141         u32 reg;
9142
9143         /*
9144          * Disable powersaving as default.
9145          */
9146         rt2x00dev->hw->wiphy->flags &= ~WIPHY_FLAG_PS_ON_BY_DEFAULT;
9147
9148         /*
9149          * Change default retry settings to values corresponding more closely
9150          * to rate[0].count setting of minstrel rate control algorithm.
9151          */
9152         rt2x00dev->hw->wiphy->retry_short = 2;
9153         rt2x00dev->hw->wiphy->retry_long = 2;
9154
9155         /*
9156          * Initialize all hw fields.
9157          */
9158         ieee80211_hw_set(rt2x00dev->hw, REPORTS_TX_ACK_STATUS);
9159         ieee80211_hw_set(rt2x00dev->hw, AMPDU_AGGREGATION);
9160         ieee80211_hw_set(rt2x00dev->hw, PS_NULLFUNC_STACK);
9161         ieee80211_hw_set(rt2x00dev->hw, SIGNAL_DBM);
9162         ieee80211_hw_set(rt2x00dev->hw, SUPPORTS_PS);
9163
9164         /*
9165          * Don't set IEEE80211_HW_HOST_BROADCAST_PS_BUFFERING for USB devices
9166          * unless we are capable of sending the buffered frames out after the
9167          * DTIM transmission using rt2x00lib_beacondone. This will send out
9168          * multicast and broadcast traffic immediately instead of buffering it
9169          * infinitly and thus dropping it after some time.
9170          */
9171         if (!rt2x00_is_usb(rt2x00dev))
9172                 ieee80211_hw_set(rt2x00dev->hw, HOST_BROADCAST_PS_BUFFERING);
9173
9174         /* Set MFP if HW crypto is disabled. */
9175         if (rt2800_hwcrypt_disabled(rt2x00dev))
9176                 ieee80211_hw_set(rt2x00dev->hw, MFP_CAPABLE);
9177
9178         SET_IEEE80211_DEV(rt2x00dev->hw, rt2x00dev->dev);
9179         SET_IEEE80211_PERM_ADDR(rt2x00dev->hw,
9180                                 rt2800_eeprom_addr(rt2x00dev,
9181                                                    EEPROM_MAC_ADDR_0));
9182
9183         /*
9184          * As rt2800 has a global fallback table we cannot specify
9185          * more then one tx rate per frame but since the hw will
9186          * try several rates (based on the fallback table) we should
9187          * initialize max_report_rates to the maximum number of rates
9188          * we are going to try. Otherwise mac80211 will truncate our
9189          * reported tx rates and the rc algortihm will end up with
9190          * incorrect data.
9191          */
9192         rt2x00dev->hw->max_rates = 1;
9193         rt2x00dev->hw->max_report_rates = 7;
9194         rt2x00dev->hw->max_rate_tries = 1;
9195
9196         /*
9197          * Initialize hw_mode information.
9198          */
9199         spec->supported_rates = SUPPORT_RATE_CCK | SUPPORT_RATE_OFDM;
9200
9201         switch (rt2x00dev->chip.rf) {
9202         case RF2720:
9203         case RF2820:
9204                 spec->num_channels = 14;
9205                 spec->channels = rf_vals;
9206                 break;
9207
9208         case RF2750:
9209         case RF2850:
9210                 spec->num_channels = ARRAY_SIZE(rf_vals);
9211                 spec->channels = rf_vals;
9212                 break;
9213
9214         case RF2020:
9215         case RF3020:
9216         case RF3021:
9217         case RF3022:
9218         case RF3070:
9219         case RF3290:
9220         case RF3320:
9221         case RF3322:
9222         case RF5350:
9223         case RF5360:
9224         case RF5362:
9225         case RF5370:
9226         case RF5372:
9227         case RF5390:
9228         case RF5392:
9229                 spec->num_channels = 14;
9230                 if (rt2800_clk_is_20mhz(rt2x00dev))
9231                         spec->channels = rf_vals_3x_xtal20;
9232                 else
9233                         spec->channels = rf_vals_3x;
9234                 break;
9235
9236         case RF7620:
9237                 spec->num_channels = ARRAY_SIZE(rf_vals_7620);
9238                 spec->channels = rf_vals_7620;
9239                 break;
9240
9241         case RF3052:
9242         case RF3053:
9243                 spec->num_channels = ARRAY_SIZE(rf_vals_3x);
9244                 spec->channels = rf_vals_3x;
9245                 break;
9246
9247         case RF5592:
9248                 reg = rt2800_register_read(rt2x00dev, MAC_DEBUG_INDEX);
9249                 if (rt2x00_get_field32(reg, MAC_DEBUG_INDEX_XTAL)) {
9250                         spec->num_channels = ARRAY_SIZE(rf_vals_5592_xtal40);
9251                         spec->channels = rf_vals_5592_xtal40;
9252                 } else {
9253                         spec->num_channels = ARRAY_SIZE(rf_vals_5592_xtal20);
9254                         spec->channels = rf_vals_5592_xtal20;
9255                 }
9256                 break;
9257         }
9258
9259         if (WARN_ON_ONCE(!spec->channels))
9260                 return -ENODEV;
9261
9262         spec->supported_bands = SUPPORT_BAND_2GHZ;
9263         if (spec->num_channels > 14)
9264                 spec->supported_bands |= SUPPORT_BAND_5GHZ;
9265
9266         /*
9267          * Initialize HT information.
9268          */
9269         if (!rt2x00_rf(rt2x00dev, RF2020))
9270                 spec->ht.ht_supported = true;
9271         else
9272                 spec->ht.ht_supported = false;
9273
9274         spec->ht.cap =
9275             IEEE80211_HT_CAP_SUP_WIDTH_20_40 |
9276             IEEE80211_HT_CAP_GRN_FLD |
9277             IEEE80211_HT_CAP_SGI_20 |
9278             IEEE80211_HT_CAP_SGI_40;
9279
9280         tx_chains = rt2x00dev->default_ant.tx_chain_num;
9281         rx_chains = rt2x00dev->default_ant.rx_chain_num;
9282
9283         if (tx_chains >= 2)
9284                 spec->ht.cap |= IEEE80211_HT_CAP_TX_STBC;
9285
9286         spec->ht.cap |= rx_chains << IEEE80211_HT_CAP_RX_STBC_SHIFT;
9287
9288         spec->ht.ampdu_factor = (rx_chains > 1) ? 3 : 2;
9289         spec->ht.ampdu_density = 4;
9290         spec->ht.mcs.tx_params = IEEE80211_HT_MCS_TX_DEFINED;
9291         if (tx_chains != rx_chains) {
9292                 spec->ht.mcs.tx_params |= IEEE80211_HT_MCS_TX_RX_DIFF;
9293                 spec->ht.mcs.tx_params |=
9294                     (tx_chains - 1) << IEEE80211_HT_MCS_TX_MAX_STREAMS_SHIFT;
9295         }
9296
9297         switch (rx_chains) {
9298         case 3:
9299                 spec->ht.mcs.rx_mask[2] = 0xff;
9300         case 2:
9301                 spec->ht.mcs.rx_mask[1] = 0xff;
9302         case 1:
9303                 spec->ht.mcs.rx_mask[0] = 0xff;
9304                 spec->ht.mcs.rx_mask[4] = 0x1; /* MCS32 */
9305                 break;
9306         }
9307
9308         /*
9309          * Create channel information array
9310          */
9311         info = kcalloc(spec->num_channels, sizeof(*info), GFP_KERNEL);
9312         if (!info)
9313                 return -ENOMEM;
9314
9315         spec->channels_info = info;
9316
9317         default_power1 = rt2800_eeprom_addr(rt2x00dev, EEPROM_TXPOWER_BG1);
9318         default_power2 = rt2800_eeprom_addr(rt2x00dev, EEPROM_TXPOWER_BG2);
9319
9320         if (rt2x00dev->default_ant.tx_chain_num > 2)
9321                 default_power3 = rt2800_eeprom_addr(rt2x00dev,
9322                                                     EEPROM_EXT_TXPOWER_BG3);
9323         else
9324                 default_power3 = NULL;
9325
9326         for (i = 0; i < 14; i++) {
9327                 info[i].default_power1 = default_power1[i];
9328                 info[i].default_power2 = default_power2[i];
9329                 if (default_power3)
9330                         info[i].default_power3 = default_power3[i];
9331         }
9332
9333         if (spec->num_channels > 14) {
9334                 default_power1 = rt2800_eeprom_addr(rt2x00dev,
9335                                                     EEPROM_TXPOWER_A1);
9336                 default_power2 = rt2800_eeprom_addr(rt2x00dev,
9337                                                     EEPROM_TXPOWER_A2);
9338
9339                 if (rt2x00dev->default_ant.tx_chain_num > 2)
9340                         default_power3 =
9341                                 rt2800_eeprom_addr(rt2x00dev,
9342                                                    EEPROM_EXT_TXPOWER_A3);
9343                 else
9344                         default_power3 = NULL;
9345
9346                 for (i = 14; i < spec->num_channels; i++) {
9347                         info[i].default_power1 = default_power1[i - 14];
9348                         info[i].default_power2 = default_power2[i - 14];
9349                         if (default_power3)
9350                                 info[i].default_power3 = default_power3[i - 14];
9351                 }
9352         }
9353
9354         switch (rt2x00dev->chip.rf) {
9355         case RF2020:
9356         case RF3020:
9357         case RF3021:
9358         case RF3022:
9359         case RF3320:
9360         case RF3052:
9361         case RF3053:
9362         case RF3070:
9363         case RF3290:
9364         case RF5350:
9365         case RF5360:
9366         case RF5362:
9367         case RF5370:
9368         case RF5372:
9369         case RF5390:
9370         case RF5392:
9371         case RF5592:
9372         case RF7620:
9373                 __set_bit(CAPABILITY_VCO_RECALIBRATION, &rt2x00dev->cap_flags);
9374                 break;
9375         }
9376
9377         return 0;
9378 }
9379
9380 static int rt2800_probe_rt(struct rt2x00_dev *rt2x00dev)
9381 {
9382         u32 reg;
9383         u32 rt;
9384         u32 rev;
9385
9386         if (rt2x00_rt(rt2x00dev, RT3290))
9387                 reg = rt2800_register_read(rt2x00dev, MAC_CSR0_3290);
9388         else
9389                 reg = rt2800_register_read(rt2x00dev, MAC_CSR0);
9390
9391         rt = rt2x00_get_field32(reg, MAC_CSR0_CHIPSET);
9392         rev = rt2x00_get_field32(reg, MAC_CSR0_REVISION);
9393
9394         switch (rt) {
9395         case RT2860:
9396         case RT2872:
9397         case RT2883:
9398         case RT3070:
9399         case RT3071:
9400         case RT3090:
9401         case RT3290:
9402         case RT3352:
9403         case RT3390:
9404         case RT3572:
9405         case RT3593:
9406         case RT5350:
9407         case RT5390:
9408         case RT5392:
9409         case RT5592:
9410                 break;
9411         default:
9412                 rt2x00_err(rt2x00dev, "Invalid RT chipset 0x%04x, rev %04x detected\n",
9413                            rt, rev);
9414                 return -ENODEV;
9415         }
9416
9417         if (rt == RT5390 && rt2x00_is_soc(rt2x00dev))
9418                 rt = RT6352;
9419
9420         rt2x00_set_rt(rt2x00dev, rt, rev);
9421
9422         return 0;
9423 }
9424
9425 int rt2800_probe_hw(struct rt2x00_dev *rt2x00dev)
9426 {
9427         int retval;
9428         u32 reg;
9429
9430         retval = rt2800_probe_rt(rt2x00dev);
9431         if (retval)
9432                 return retval;
9433
9434         /*
9435          * Allocate eeprom data.
9436          */
9437         retval = rt2800_validate_eeprom(rt2x00dev);
9438         if (retval)
9439                 return retval;
9440
9441         retval = rt2800_init_eeprom(rt2x00dev);
9442         if (retval)
9443                 return retval;
9444
9445         /*
9446          * Enable rfkill polling by setting GPIO direction of the
9447          * rfkill switch GPIO pin correctly.
9448          */
9449         reg = rt2800_register_read(rt2x00dev, GPIO_CTRL);
9450         rt2x00_set_field32(&reg, GPIO_CTRL_DIR2, 1);
9451         rt2800_register_write(rt2x00dev, GPIO_CTRL, reg);
9452
9453         /*
9454          * Initialize hw specifications.
9455          */
9456         retval = rt2800_probe_hw_mode(rt2x00dev);
9457         if (retval)
9458                 return retval;
9459
9460         /*
9461          * Set device capabilities.
9462          */
9463         __set_bit(CAPABILITY_CONTROL_FILTERS, &rt2x00dev->cap_flags);
9464         __set_bit(CAPABILITY_CONTROL_FILTER_PSPOLL, &rt2x00dev->cap_flags);
9465         if (!rt2x00_is_usb(rt2x00dev))
9466                 __set_bit(CAPABILITY_PRE_TBTT_INTERRUPT, &rt2x00dev->cap_flags);
9467
9468         /*
9469          * Set device requirements.
9470          */
9471         if (!rt2x00_is_soc(rt2x00dev))
9472                 __set_bit(REQUIRE_FIRMWARE, &rt2x00dev->cap_flags);
9473         __set_bit(REQUIRE_L2PAD, &rt2x00dev->cap_flags);
9474         __set_bit(REQUIRE_TXSTATUS_FIFO, &rt2x00dev->cap_flags);
9475         if (!rt2800_hwcrypt_disabled(rt2x00dev))
9476                 __set_bit(CAPABILITY_HW_CRYPTO, &rt2x00dev->cap_flags);
9477         __set_bit(CAPABILITY_LINK_TUNING, &rt2x00dev->cap_flags);
9478         __set_bit(REQUIRE_HT_TX_DESC, &rt2x00dev->cap_flags);
9479         if (rt2x00_is_usb(rt2x00dev))
9480                 __set_bit(REQUIRE_PS_AUTOWAKE, &rt2x00dev->cap_flags);
9481         else {
9482                 __set_bit(REQUIRE_DMA, &rt2x00dev->cap_flags);
9483                 __set_bit(REQUIRE_TASKLET_CONTEXT, &rt2x00dev->cap_flags);
9484         }
9485
9486         /*
9487          * Set the rssi offset.
9488          */
9489         rt2x00dev->rssi_offset = DEFAULT_RSSI_OFFSET;
9490
9491         return 0;
9492 }
9493 EXPORT_SYMBOL_GPL(rt2800_probe_hw);
9494
9495 /*
9496  * IEEE80211 stack callback functions.
9497  */
9498 void rt2800_get_key_seq(struct ieee80211_hw *hw,
9499                         struct ieee80211_key_conf *key,
9500                         struct ieee80211_key_seq *seq)
9501 {
9502         struct rt2x00_dev *rt2x00dev = hw->priv;
9503         struct mac_iveiv_entry iveiv_entry;
9504         u32 offset;
9505
9506         if (key->cipher != WLAN_CIPHER_SUITE_TKIP)
9507                 return;
9508
9509         offset = MAC_IVEIV_ENTRY(key->hw_key_idx);
9510         rt2800_register_multiread(rt2x00dev, offset,
9511                                       &iveiv_entry, sizeof(iveiv_entry));
9512
9513         memcpy(&seq->tkip.iv16, &iveiv_entry.iv[0], 2);
9514         memcpy(&seq->tkip.iv32, &iveiv_entry.iv[4], 4);
9515 }
9516 EXPORT_SYMBOL_GPL(rt2800_get_key_seq);
9517
9518 int rt2800_set_rts_threshold(struct ieee80211_hw *hw, u32 value)
9519 {
9520         struct rt2x00_dev *rt2x00dev = hw->priv;
9521         u32 reg;
9522         bool enabled = (value < IEEE80211_MAX_RTS_THRESHOLD);
9523
9524         reg = rt2800_register_read(rt2x00dev, TX_RTS_CFG);
9525         rt2x00_set_field32(&reg, TX_RTS_CFG_RTS_THRES, value);
9526         rt2800_register_write(rt2x00dev, TX_RTS_CFG, reg);
9527
9528         reg = rt2800_register_read(rt2x00dev, CCK_PROT_CFG);
9529         rt2x00_set_field32(&reg, CCK_PROT_CFG_RTS_TH_EN, enabled);
9530         rt2800_register_write(rt2x00dev, CCK_PROT_CFG, reg);
9531
9532         reg = rt2800_register_read(rt2x00dev, OFDM_PROT_CFG);
9533         rt2x00_set_field32(&reg, OFDM_PROT_CFG_RTS_TH_EN, enabled);
9534         rt2800_register_write(rt2x00dev, OFDM_PROT_CFG, reg);
9535
9536         reg = rt2800_register_read(rt2x00dev, MM20_PROT_CFG);
9537         rt2x00_set_field32(&reg, MM20_PROT_CFG_RTS_TH_EN, enabled);
9538         rt2800_register_write(rt2x00dev, MM20_PROT_CFG, reg);
9539
9540         reg = rt2800_register_read(rt2x00dev, MM40_PROT_CFG);
9541         rt2x00_set_field32(&reg, MM40_PROT_CFG_RTS_TH_EN, enabled);
9542         rt2800_register_write(rt2x00dev, MM40_PROT_CFG, reg);
9543
9544         reg = rt2800_register_read(rt2x00dev, GF20_PROT_CFG);
9545         rt2x00_set_field32(&reg, GF20_PROT_CFG_RTS_TH_EN, enabled);
9546         rt2800_register_write(rt2x00dev, GF20_PROT_CFG, reg);
9547
9548         reg = rt2800_register_read(rt2x00dev, GF40_PROT_CFG);
9549         rt2x00_set_field32(&reg, GF40_PROT_CFG_RTS_TH_EN, enabled);
9550         rt2800_register_write(rt2x00dev, GF40_PROT_CFG, reg);
9551
9552         return 0;
9553 }
9554 EXPORT_SYMBOL_GPL(rt2800_set_rts_threshold);
9555
9556 int rt2800_conf_tx(struct ieee80211_hw *hw,
9557                    struct ieee80211_vif *vif, u16 queue_idx,
9558                    const struct ieee80211_tx_queue_params *params)
9559 {
9560         struct rt2x00_dev *rt2x00dev = hw->priv;
9561         struct data_queue *queue;
9562         struct rt2x00_field32 field;
9563         int retval;
9564         u32 reg;
9565         u32 offset;
9566
9567         /*
9568          * First pass the configuration through rt2x00lib, that will
9569          * update the queue settings and validate the input. After that
9570          * we are free to update the registers based on the value
9571          * in the queue parameter.
9572          */
9573         retval = rt2x00mac_conf_tx(hw, vif, queue_idx, params);
9574         if (retval)
9575                 return retval;
9576
9577         /*
9578          * We only need to perform additional register initialization
9579          * for WMM queues/
9580          */
9581         if (queue_idx >= 4)
9582                 return 0;
9583
9584         queue = rt2x00queue_get_tx_queue(rt2x00dev, queue_idx);
9585
9586         /* Update WMM TXOP register */
9587         offset = WMM_TXOP0_CFG + (sizeof(u32) * (!!(queue_idx & 2)));
9588         field.bit_offset = (queue_idx & 1) * 16;
9589         field.bit_mask = 0xffff << field.bit_offset;
9590
9591         reg = rt2800_register_read(rt2x00dev, offset);
9592         rt2x00_set_field32(&reg, field, queue->txop);
9593         rt2800_register_write(rt2x00dev, offset, reg);
9594
9595         /* Update WMM registers */
9596         field.bit_offset = queue_idx * 4;
9597         field.bit_mask = 0xf << field.bit_offset;
9598
9599         reg = rt2800_register_read(rt2x00dev, WMM_AIFSN_CFG);
9600         rt2x00_set_field32(&reg, field, queue->aifs);
9601         rt2800_register_write(rt2x00dev, WMM_AIFSN_CFG, reg);
9602
9603         reg = rt2800_register_read(rt2x00dev, WMM_CWMIN_CFG);
9604         rt2x00_set_field32(&reg, field, queue->cw_min);
9605         rt2800_register_write(rt2x00dev, WMM_CWMIN_CFG, reg);
9606
9607         reg = rt2800_register_read(rt2x00dev, WMM_CWMAX_CFG);
9608         rt2x00_set_field32(&reg, field, queue->cw_max);
9609         rt2800_register_write(rt2x00dev, WMM_CWMAX_CFG, reg);
9610
9611         /* Update EDCA registers */
9612         offset = EDCA_AC0_CFG + (sizeof(u32) * queue_idx);
9613
9614         reg = rt2800_register_read(rt2x00dev, offset);
9615         rt2x00_set_field32(&reg, EDCA_AC0_CFG_TX_OP, queue->txop);
9616         rt2x00_set_field32(&reg, EDCA_AC0_CFG_AIFSN, queue->aifs);
9617         rt2x00_set_field32(&reg, EDCA_AC0_CFG_CWMIN, queue->cw_min);
9618         rt2x00_set_field32(&reg, EDCA_AC0_CFG_CWMAX, queue->cw_max);
9619         rt2800_register_write(rt2x00dev, offset, reg);
9620
9621         return 0;
9622 }
9623 EXPORT_SYMBOL_GPL(rt2800_conf_tx);
9624
9625 u64 rt2800_get_tsf(struct ieee80211_hw *hw, struct ieee80211_vif *vif)
9626 {
9627         struct rt2x00_dev *rt2x00dev = hw->priv;
9628         u64 tsf;
9629         u32 reg;
9630
9631         reg = rt2800_register_read(rt2x00dev, TSF_TIMER_DW1);
9632         tsf = (u64) rt2x00_get_field32(reg, TSF_TIMER_DW1_HIGH_WORD) << 32;
9633         reg = rt2800_register_read(rt2x00dev, TSF_TIMER_DW0);
9634         tsf |= rt2x00_get_field32(reg, TSF_TIMER_DW0_LOW_WORD);
9635
9636         return tsf;
9637 }
9638 EXPORT_SYMBOL_GPL(rt2800_get_tsf);
9639
9640 int rt2800_ampdu_action(struct ieee80211_hw *hw, struct ieee80211_vif *vif,
9641                         struct ieee80211_ampdu_params *params)
9642 {
9643         struct ieee80211_sta *sta = params->sta;
9644         enum ieee80211_ampdu_mlme_action action = params->action;
9645         u16 tid = params->tid;
9646         struct rt2x00_sta *sta_priv = (struct rt2x00_sta *)sta->drv_priv;
9647         int ret = 0;
9648
9649         /*
9650          * Don't allow aggregation for stations the hardware isn't aware
9651          * of because tx status reports for frames to an unknown station
9652          * always contain wcid=WCID_END+1 and thus we can't distinguish
9653          * between multiple stations which leads to unwanted situations
9654          * when the hw reorders frames due to aggregation.
9655          */
9656         if (sta_priv->wcid > WCID_END)
9657                 return 1;
9658
9659         switch (action) {
9660         case IEEE80211_AMPDU_RX_START:
9661         case IEEE80211_AMPDU_RX_STOP:
9662                 /*
9663                  * The hw itself takes care of setting up BlockAck mechanisms.
9664                  * So, we only have to allow mac80211 to nagotiate a BlockAck
9665                  * agreement. Once that is done, the hw will BlockAck incoming
9666                  * AMPDUs without further setup.
9667                  */
9668                 break;
9669         case IEEE80211_AMPDU_TX_START:
9670                 ieee80211_start_tx_ba_cb_irqsafe(vif, sta->addr, tid);
9671                 break;
9672         case IEEE80211_AMPDU_TX_STOP_CONT:
9673         case IEEE80211_AMPDU_TX_STOP_FLUSH:
9674         case IEEE80211_AMPDU_TX_STOP_FLUSH_CONT:
9675                 ieee80211_stop_tx_ba_cb_irqsafe(vif, sta->addr, tid);
9676                 break;
9677         case IEEE80211_AMPDU_TX_OPERATIONAL:
9678                 break;
9679         default:
9680                 rt2x00_warn((struct rt2x00_dev *)hw->priv,
9681                             "Unknown AMPDU action\n");
9682         }
9683
9684         return ret;
9685 }
9686 EXPORT_SYMBOL_GPL(rt2800_ampdu_action);
9687
9688 int rt2800_get_survey(struct ieee80211_hw *hw, int idx,
9689                       struct survey_info *survey)
9690 {
9691         struct rt2x00_dev *rt2x00dev = hw->priv;
9692         struct ieee80211_conf *conf = &hw->conf;
9693         u32 idle, busy, busy_ext;
9694
9695         if (idx != 0)
9696                 return -ENOENT;
9697
9698         survey->channel = conf->chandef.chan;
9699
9700         idle = rt2800_register_read(rt2x00dev, CH_IDLE_STA);
9701         busy = rt2800_register_read(rt2x00dev, CH_BUSY_STA);
9702         busy_ext = rt2800_register_read(rt2x00dev, CH_BUSY_STA_SEC);
9703
9704         if (idle || busy) {
9705                 survey->filled = SURVEY_INFO_TIME |
9706                                  SURVEY_INFO_TIME_BUSY |
9707                                  SURVEY_INFO_TIME_EXT_BUSY;
9708
9709                 survey->time = (idle + busy) / 1000;
9710                 survey->time_busy = busy / 1000;
9711                 survey->time_ext_busy = busy_ext / 1000;
9712         }
9713
9714         if (!(hw->conf.flags & IEEE80211_CONF_OFFCHANNEL))
9715                 survey->filled |= SURVEY_INFO_IN_USE;
9716
9717         return 0;
9718
9719 }
9720 EXPORT_SYMBOL_GPL(rt2800_get_survey);
9721
9722 MODULE_AUTHOR(DRV_PROJECT ", Bartlomiej Zolnierkiewicz");
9723 MODULE_VERSION(DRV_VERSION);
9724 MODULE_DESCRIPTION("Ralink RT2800 library");
9725 MODULE_LICENSE("GPL");