Merge tag 'for-linus-20181207' of git://git.kernel.dk/linux-block
[linux-2.6-microblaze.git] / drivers / net / wireless / intel / iwlwifi / mvm / time-event.h
1 /******************************************************************************
2  *
3  * This file is provided under a dual BSD/GPLv2 license.  When using or
4  * redistributing this file, you may do so under either license.
5  *
6  * GPL LICENSE SUMMARY
7  *
8  * Copyright(c) 2012 - 2014 Intel Corporation. All rights reserved.
9  * Copyright(c) 2013 - 2014 Intel Mobile Communications GmbH
10  *
11  * This program is free software; you can redistribute it and/or modify
12  * it under the terms of version 2 of the GNU General Public License as
13  * published by the Free Software Foundation.
14  *
15  * This program is distributed in the hope that it will be useful, but
16  * WITHOUT ANY WARRANTY; without even the implied warranty of
17  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
18  * General Public License for more details.
19  *
20  * The full GNU General Public License is included in this distribution
21  * in the file called COPYING.
22  *
23  * Contact Information:
24  *  Intel Linux Wireless <linuxwifi@intel.com>
25  * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
26  *
27  * BSD LICENSE
28  *
29  * Copyright(c) 2012 - 2014 Intel Corporation. All rights reserved.
30  * Copyright(c) 2013 - 2014 Intel Mobile Communications GmbH
31  * All rights reserved.
32  *
33  * Redistribution and use in source and binary forms, with or without
34  * modification, are permitted provided that the following conditions
35  * are met:
36  *
37  *  * Redistributions of source code must retain the above copyright
38  *    notice, this list of conditions and the following disclaimer.
39  *  * Redistributions in binary form must reproduce the above copyright
40  *    notice, this list of conditions and the following disclaimer in
41  *    the documentation and/or other materials provided with the
42  *    distribution.
43  *  * Neither the name Intel Corporation nor the names of its
44  *    contributors may be used to endorse or promote products derived
45  *    from this software without specific prior written permission.
46  *
47  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
48  * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
49  * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
50  * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
51  * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
52  * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
53  * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
54  * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
55  * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
56  * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
57  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
58  *
59  *****************************************************************************/
60
61 #ifndef __time_event_h__
62 #define __time_event_h__
63
64 #include "fw-api.h"
65
66 #include "mvm.h"
67
68 /**
69  * DOC: Time Events - what is it?
70  *
71  * Time Events are a fw feature that allows the driver to control the presence
72  * of the device on the channel. Since the fw supports multiple channels
73  * concurrently, the fw may choose to jump to another channel at any time.
74  * In order to make sure that the fw is on a specific channel at a certain time
75  * and for a certain duration, the driver needs to issue a time event.
76  *
77  * The simplest example is for BSS association. The driver issues a time event,
78  * waits for it to start, and only then tells mac80211 that we can start the
79  * association. This way, we make sure that the association will be done
80  * smoothly and won't be interrupted by channel switch decided within the fw.
81  */
82
83  /**
84  * DOC: The flow against the fw
85  *
86  * When the driver needs to make sure we are in a certain channel, at a certain
87  * time and for a certain duration, it sends a Time Event. The flow against the
88  * fw goes like this:
89  *      1) Driver sends a TIME_EVENT_CMD to the fw
90  *      2) Driver gets the response for that command. This response contains the
91  *         Unique ID (UID) of the event.
92  *      3) The fw sends notification when the event starts.
93  *
94  * Of course the API provides various options that allow to cover parameters
95  * of the flow.
96  *      What is the duration of the event?
97  *      What is the start time of the event?
98  *      Is there an end-time for the event?
99  *      How much can the event be delayed?
100  *      Can the event be split?
101  *      If yes what is the maximal number of chunks?
102  *      etc...
103  */
104
105 /**
106  * DOC: Abstraction to the driver
107  *
108  * In order to simplify the use of time events to the rest of the driver,
109  * we abstract the use of time events. This component provides the functions
110  * needed by the driver.
111  */
112
113 #define IWL_MVM_TE_SESSION_PROTECTION_MAX_TIME_MS 600
114 #define IWL_MVM_TE_SESSION_PROTECTION_MIN_TIME_MS 400
115
116 /**
117  * iwl_mvm_protect_session - start / extend the session protection.
118  * @mvm: the mvm component
119  * @vif: the virtual interface for which the session is issued
120  * @duration: the duration of the session in TU.
121  * @min_duration: will start a new session if the current session will end
122  *      in less than min_duration.
123  * @max_delay: maximum delay before starting the time event (in TU)
124  * @wait_for_notif: true if it is required that a time event notification be
125  *      waited for (that the time event has been scheduled before returning)
126  *
127  * This function can be used to start a session protection which means that the
128  * fw will stay on the channel for %duration_ms milliseconds. This function
129  * can block (sleep) until the session starts. This function can also be used
130  * to extend a currently running session.
131  * This function is meant to be used for BSS association for example, where we
132  * want to make sure that the fw stays on the channel during the association.
133  */
134 void iwl_mvm_protect_session(struct iwl_mvm *mvm,
135                              struct ieee80211_vif *vif,
136                              u32 duration, u32 min_duration,
137                              u32 max_delay, bool wait_for_notif);
138
139 /**
140  * iwl_mvm_stop_session_protection - cancel the session protection.
141  * @mvm: the mvm component
142  * @vif: the virtual interface for which the session is issued
143  *
144  * This functions cancels the session protection which is an act of good
145  * citizenship. If it is not needed any more it should be canceled because
146  * the other bindings wait for the medium during that time.
147  * This funtions doesn't sleep.
148  */
149 void iwl_mvm_stop_session_protection(struct iwl_mvm *mvm,
150                                       struct ieee80211_vif *vif);
151
152 /*
153  * iwl_mvm_rx_time_event_notif - handles %TIME_EVENT_NOTIFICATION.
154  */
155 void iwl_mvm_rx_time_event_notif(struct iwl_mvm *mvm,
156                                  struct iwl_rx_cmd_buffer *rxb);
157
158 /**
159  * iwl_mvm_start_p2p_roc - start remain on channel for p2p device functionality
160  * @mvm: the mvm component
161  * @vif: the virtual interface for which the roc is requested. It is assumed
162  * that the vif type is NL80211_IFTYPE_P2P_DEVICE
163  * @duration: the requested duration in millisecond for the fw to be on the
164  * channel that is bound to the vif.
165  * @type: the remain on channel request type
166  *
167  * This function can be used to issue a remain on channel session,
168  * which means that the fw will stay in the channel for the request %duration
169  * milliseconds. The function is async, meaning that it only issues the ROC
170  * request but does not wait for it to start. Once the FW is ready to serve the
171  * ROC request, it will issue a notification to the driver that it is on the
172  * requested channel. Once the FW completes the ROC request it will issue
173  * another notification to the driver.
174  */
175 int iwl_mvm_start_p2p_roc(struct iwl_mvm *mvm, struct ieee80211_vif *vif,
176                           int duration, enum ieee80211_roc_type type);
177
178 /**
179  * iwl_mvm_stop_roc - stop remain on channel functionality
180  * @mvm: the mvm component
181  *
182  * This function can be used to cancel an ongoing ROC session.
183  * The function is async, it will instruct the FW to stop serving the ROC
184  * session, but will not wait for the actual stopping of the session.
185  */
186 void iwl_mvm_stop_roc(struct iwl_mvm *mvm);
187
188 /**
189  * iwl_mvm_remove_time_event - general function to clean up of time event
190  * @mvm: the mvm component
191  * @vif: the vif to which the time event belongs
192  * @te_data: the time event data that corresponds to that time event
193  *
194  * This function can be used to cancel a time event regardless its type.
195  * It is useful for cleaning up time events running before removing an
196  * interface.
197  */
198 void iwl_mvm_remove_time_event(struct iwl_mvm *mvm,
199                                struct iwl_mvm_vif *mvmvif,
200                                struct iwl_mvm_time_event_data *te_data);
201
202 /**
203  * iwl_mvm_te_clear_data - remove time event from list
204  * @mvm: the mvm component
205  * @te_data: the time event data to remove
206  *
207  * This function is mostly internal, it is made available here only
208  * for firmware restart purposes.
209  */
210 void iwl_mvm_te_clear_data(struct iwl_mvm *mvm,
211                            struct iwl_mvm_time_event_data *te_data);
212
213 void iwl_mvm_cleanup_roc_te(struct iwl_mvm *mvm);
214 void iwl_mvm_roc_done_wk(struct work_struct *wk);
215
216 /**
217  * iwl_mvm_schedule_csa_period - request channel switch absence period
218  * @mvm: the mvm component
219  * @vif: the virtual interface for which the channel switch is issued
220  * @duration: the duration of the NoA in TU.
221  * @apply_time: NoA start time in GP2.
222  *
223  * This function is used to schedule NoA time event and is used to perform
224  * the channel switch flow.
225  */
226 int iwl_mvm_schedule_csa_period(struct iwl_mvm *mvm,
227                                 struct ieee80211_vif *vif,
228                                 u32 duration, u32 apply_time);
229
230 /**
231  * iwl_mvm_te_scheduled - check if the fw received the TE cmd
232  * @te_data: the time event data that corresponds to that time event
233  *
234  * This function returns true iff this TE is added to the fw.
235  */
236 static inline bool
237 iwl_mvm_te_scheduled(struct iwl_mvm_time_event_data *te_data)
238 {
239         if (!te_data)
240                 return false;
241
242         return !!te_data->uid;
243 }
244
245 #endif /* __time_event_h__ */