ALSA: intel8x0: Don't update period unless prepared
[linux-2.6-microblaze.git] / drivers / net / ppp / ppp_async.c
1 // SPDX-License-Identifier: GPL-2.0-or-later
2 /*
3  * PPP async serial channel driver for Linux.
4  *
5  * Copyright 1999 Paul Mackerras.
6  *
7  * This driver provides the encapsulation and framing for sending
8  * and receiving PPP frames over async serial lines.  It relies on
9  * the generic PPP layer to give it frames to send and to process
10  * received frames.  It implements the PPP line discipline.
11  *
12  * Part of the code in this driver was inspired by the old async-only
13  * PPP driver, written by Michael Callahan and Al Longyear, and
14  * subsequently hacked by Paul Mackerras.
15  */
16
17 #include <linux/module.h>
18 #include <linux/kernel.h>
19 #include <linux/skbuff.h>
20 #include <linux/tty.h>
21 #include <linux/netdevice.h>
22 #include <linux/poll.h>
23 #include <linux/crc-ccitt.h>
24 #include <linux/ppp_defs.h>
25 #include <linux/ppp-ioctl.h>
26 #include <linux/ppp_channel.h>
27 #include <linux/spinlock.h>
28 #include <linux/init.h>
29 #include <linux/interrupt.h>
30 #include <linux/jiffies.h>
31 #include <linux/slab.h>
32 #include <asm/unaligned.h>
33 #include <linux/uaccess.h>
34 #include <asm/string.h>
35
36 #define PPP_VERSION     "2.4.2"
37
38 #define OBUFSIZE        4096
39
40 /* Structure for storing local state. */
41 struct asyncppp {
42         struct tty_struct *tty;
43         unsigned int    flags;
44         unsigned int    state;
45         unsigned int    rbits;
46         int             mru;
47         spinlock_t      xmit_lock;
48         spinlock_t      recv_lock;
49         unsigned long   xmit_flags;
50         u32             xaccm[8];
51         u32             raccm;
52         unsigned int    bytes_sent;
53         unsigned int    bytes_rcvd;
54
55         struct sk_buff  *tpkt;
56         int             tpkt_pos;
57         u16             tfcs;
58         unsigned char   *optr;
59         unsigned char   *olim;
60         unsigned long   last_xmit;
61
62         struct sk_buff  *rpkt;
63         int             lcp_fcs;
64         struct sk_buff_head rqueue;
65
66         struct tasklet_struct tsk;
67
68         refcount_t      refcnt;
69         struct completion dead;
70         struct ppp_channel chan;        /* interface to generic ppp layer */
71         unsigned char   obuf[OBUFSIZE];
72 };
73
74 /* Bit numbers in xmit_flags */
75 #define XMIT_WAKEUP     0
76 #define XMIT_FULL       1
77 #define XMIT_BUSY       2
78
79 /* State bits */
80 #define SC_TOSS         1
81 #define SC_ESCAPE       2
82 #define SC_PREV_ERROR   4
83
84 /* Bits in rbits */
85 #define SC_RCV_BITS     (SC_RCV_B7_1|SC_RCV_B7_0|SC_RCV_ODDP|SC_RCV_EVNP)
86
87 static int flag_time = HZ;
88 module_param(flag_time, int, 0);
89 MODULE_PARM_DESC(flag_time, "ppp_async: interval between flagged packets (in clock ticks)");
90 MODULE_LICENSE("GPL");
91 MODULE_ALIAS_LDISC(N_PPP);
92
93 /*
94  * Prototypes.
95  */
96 static int ppp_async_encode(struct asyncppp *ap);
97 static int ppp_async_send(struct ppp_channel *chan, struct sk_buff *skb);
98 static int ppp_async_push(struct asyncppp *ap);
99 static void ppp_async_flush_output(struct asyncppp *ap);
100 static void ppp_async_input(struct asyncppp *ap, const unsigned char *buf,
101                             char *flags, int count);
102 static int ppp_async_ioctl(struct ppp_channel *chan, unsigned int cmd,
103                            unsigned long arg);
104 static void ppp_async_process(struct tasklet_struct *t);
105
106 static void async_lcp_peek(struct asyncppp *ap, unsigned char *data,
107                            int len, int inbound);
108
109 static const struct ppp_channel_ops async_ops = {
110         .start_xmit = ppp_async_send,
111         .ioctl      = ppp_async_ioctl,
112 };
113
114 /*
115  * Routines implementing the PPP line discipline.
116  */
117
118 /*
119  * We have a potential race on dereferencing tty->disc_data,
120  * because the tty layer provides no locking at all - thus one
121  * cpu could be running ppp_asynctty_receive while another
122  * calls ppp_asynctty_close, which zeroes tty->disc_data and
123  * frees the memory that ppp_asynctty_receive is using.  The best
124  * way to fix this is to use a rwlock in the tty struct, but for now
125  * we use a single global rwlock for all ttys in ppp line discipline.
126  *
127  * FIXME: this is no longer true. The _close path for the ldisc is
128  * now guaranteed to be sane.
129  */
130 static DEFINE_RWLOCK(disc_data_lock);
131
132 static struct asyncppp *ap_get(struct tty_struct *tty)
133 {
134         struct asyncppp *ap;
135
136         read_lock(&disc_data_lock);
137         ap = tty->disc_data;
138         if (ap != NULL)
139                 refcount_inc(&ap->refcnt);
140         read_unlock(&disc_data_lock);
141         return ap;
142 }
143
144 static void ap_put(struct asyncppp *ap)
145 {
146         if (refcount_dec_and_test(&ap->refcnt))
147                 complete(&ap->dead);
148 }
149
150 /*
151  * Called when a tty is put into PPP line discipline. Called in process
152  * context.
153  */
154 static int
155 ppp_asynctty_open(struct tty_struct *tty)
156 {
157         struct asyncppp *ap;
158         int err;
159         int speed;
160
161         if (tty->ops->write == NULL)
162                 return -EOPNOTSUPP;
163
164         err = -ENOMEM;
165         ap = kzalloc(sizeof(*ap), GFP_KERNEL);
166         if (!ap)
167                 goto out;
168
169         /* initialize the asyncppp structure */
170         ap->tty = tty;
171         ap->mru = PPP_MRU;
172         spin_lock_init(&ap->xmit_lock);
173         spin_lock_init(&ap->recv_lock);
174         ap->xaccm[0] = ~0U;
175         ap->xaccm[3] = 0x60000000U;
176         ap->raccm = ~0U;
177         ap->optr = ap->obuf;
178         ap->olim = ap->obuf;
179         ap->lcp_fcs = -1;
180
181         skb_queue_head_init(&ap->rqueue);
182         tasklet_setup(&ap->tsk, ppp_async_process);
183
184         refcount_set(&ap->refcnt, 1);
185         init_completion(&ap->dead);
186
187         ap->chan.private = ap;
188         ap->chan.ops = &async_ops;
189         ap->chan.mtu = PPP_MRU;
190         speed = tty_get_baud_rate(tty);
191         ap->chan.speed = speed;
192         err = ppp_register_channel(&ap->chan);
193         if (err)
194                 goto out_free;
195
196         tty->disc_data = ap;
197         tty->receive_room = 65536;
198         return 0;
199
200  out_free:
201         kfree(ap);
202  out:
203         return err;
204 }
205
206 /*
207  * Called when the tty is put into another line discipline
208  * or it hangs up.  We have to wait for any cpu currently
209  * executing in any of the other ppp_asynctty_* routines to
210  * finish before we can call ppp_unregister_channel and free
211  * the asyncppp struct.  This routine must be called from
212  * process context, not interrupt or softirq context.
213  */
214 static void
215 ppp_asynctty_close(struct tty_struct *tty)
216 {
217         struct asyncppp *ap;
218
219         write_lock_irq(&disc_data_lock);
220         ap = tty->disc_data;
221         tty->disc_data = NULL;
222         write_unlock_irq(&disc_data_lock);
223         if (!ap)
224                 return;
225
226         /*
227          * We have now ensured that nobody can start using ap from now
228          * on, but we have to wait for all existing users to finish.
229          * Note that ppp_unregister_channel ensures that no calls to
230          * our channel ops (i.e. ppp_async_send/ioctl) are in progress
231          * by the time it returns.
232          */
233         if (!refcount_dec_and_test(&ap->refcnt))
234                 wait_for_completion(&ap->dead);
235         tasklet_kill(&ap->tsk);
236
237         ppp_unregister_channel(&ap->chan);
238         kfree_skb(ap->rpkt);
239         skb_queue_purge(&ap->rqueue);
240         kfree_skb(ap->tpkt);
241         kfree(ap);
242 }
243
244 /*
245  * Called on tty hangup in process context.
246  *
247  * Wait for I/O to driver to complete and unregister PPP channel.
248  * This is already done by the close routine, so just call that.
249  */
250 static int ppp_asynctty_hangup(struct tty_struct *tty)
251 {
252         ppp_asynctty_close(tty);
253         return 0;
254 }
255
256 /*
257  * Read does nothing - no data is ever available this way.
258  * Pppd reads and writes packets via /dev/ppp instead.
259  */
260 static ssize_t
261 ppp_asynctty_read(struct tty_struct *tty, struct file *file,
262                   unsigned char *buf, size_t count,
263                   void **cookie, unsigned long offset)
264 {
265         return -EAGAIN;
266 }
267
268 /*
269  * Write on the tty does nothing, the packets all come in
270  * from the ppp generic stuff.
271  */
272 static ssize_t
273 ppp_asynctty_write(struct tty_struct *tty, struct file *file,
274                    const unsigned char *buf, size_t count)
275 {
276         return -EAGAIN;
277 }
278
279 /*
280  * Called in process context only. May be re-entered by multiple
281  * ioctl calling threads.
282  */
283
284 static int
285 ppp_asynctty_ioctl(struct tty_struct *tty, struct file *file,
286                    unsigned int cmd, unsigned long arg)
287 {
288         struct asyncppp *ap = ap_get(tty);
289         int err, val;
290         int __user *p = (int __user *)arg;
291
292         if (!ap)
293                 return -ENXIO;
294         err = -EFAULT;
295         switch (cmd) {
296         case PPPIOCGCHAN:
297                 err = -EFAULT;
298                 if (put_user(ppp_channel_index(&ap->chan), p))
299                         break;
300                 err = 0;
301                 break;
302
303         case PPPIOCGUNIT:
304                 err = -EFAULT;
305                 if (put_user(ppp_unit_number(&ap->chan), p))
306                         break;
307                 err = 0;
308                 break;
309
310         case TCFLSH:
311                 /* flush our buffers and the serial port's buffer */
312                 if (arg == TCIOFLUSH || arg == TCOFLUSH)
313                         ppp_async_flush_output(ap);
314                 err = n_tty_ioctl_helper(tty, file, cmd, arg);
315                 break;
316
317         case FIONREAD:
318                 val = 0;
319                 if (put_user(val, p))
320                         break;
321                 err = 0;
322                 break;
323
324         default:
325                 /* Try the various mode ioctls */
326                 err = tty_mode_ioctl(tty, file, cmd, arg);
327         }
328
329         ap_put(ap);
330         return err;
331 }
332
333 /* No kernel lock - fine */
334 static __poll_t
335 ppp_asynctty_poll(struct tty_struct *tty, struct file *file, poll_table *wait)
336 {
337         return 0;
338 }
339
340 /* May sleep, don't call from interrupt level or with interrupts disabled */
341 static void
342 ppp_asynctty_receive(struct tty_struct *tty, const unsigned char *buf,
343                   char *cflags, int count)
344 {
345         struct asyncppp *ap = ap_get(tty);
346         unsigned long flags;
347
348         if (!ap)
349                 return;
350         spin_lock_irqsave(&ap->recv_lock, flags);
351         ppp_async_input(ap, buf, cflags, count);
352         spin_unlock_irqrestore(&ap->recv_lock, flags);
353         if (!skb_queue_empty(&ap->rqueue))
354                 tasklet_schedule(&ap->tsk);
355         ap_put(ap);
356         tty_unthrottle(tty);
357 }
358
359 static void
360 ppp_asynctty_wakeup(struct tty_struct *tty)
361 {
362         struct asyncppp *ap = ap_get(tty);
363
364         clear_bit(TTY_DO_WRITE_WAKEUP, &tty->flags);
365         if (!ap)
366                 return;
367         set_bit(XMIT_WAKEUP, &ap->xmit_flags);
368         tasklet_schedule(&ap->tsk);
369         ap_put(ap);
370 }
371
372
373 static struct tty_ldisc_ops ppp_ldisc = {
374         .owner  = THIS_MODULE,
375         .magic  = TTY_LDISC_MAGIC,
376         .name   = "ppp",
377         .open   = ppp_asynctty_open,
378         .close  = ppp_asynctty_close,
379         .hangup = ppp_asynctty_hangup,
380         .read   = ppp_asynctty_read,
381         .write  = ppp_asynctty_write,
382         .ioctl  = ppp_asynctty_ioctl,
383         .poll   = ppp_asynctty_poll,
384         .receive_buf = ppp_asynctty_receive,
385         .write_wakeup = ppp_asynctty_wakeup,
386 };
387
388 static int __init
389 ppp_async_init(void)
390 {
391         int err;
392
393         err = tty_register_ldisc(N_PPP, &ppp_ldisc);
394         if (err != 0)
395                 printk(KERN_ERR "PPP_async: error %d registering line disc.\n",
396                        err);
397         return err;
398 }
399
400 /*
401  * The following routines provide the PPP channel interface.
402  */
403 static int
404 ppp_async_ioctl(struct ppp_channel *chan, unsigned int cmd, unsigned long arg)
405 {
406         struct asyncppp *ap = chan->private;
407         void __user *argp = (void __user *)arg;
408         int __user *p = argp;
409         int err, val;
410         u32 accm[8];
411
412         err = -EFAULT;
413         switch (cmd) {
414         case PPPIOCGFLAGS:
415                 val = ap->flags | ap->rbits;
416                 if (put_user(val, p))
417                         break;
418                 err = 0;
419                 break;
420         case PPPIOCSFLAGS:
421                 if (get_user(val, p))
422                         break;
423                 ap->flags = val & ~SC_RCV_BITS;
424                 spin_lock_irq(&ap->recv_lock);
425                 ap->rbits = val & SC_RCV_BITS;
426                 spin_unlock_irq(&ap->recv_lock);
427                 err = 0;
428                 break;
429
430         case PPPIOCGASYNCMAP:
431                 if (put_user(ap->xaccm[0], (u32 __user *)argp))
432                         break;
433                 err = 0;
434                 break;
435         case PPPIOCSASYNCMAP:
436                 if (get_user(ap->xaccm[0], (u32 __user *)argp))
437                         break;
438                 err = 0;
439                 break;
440
441         case PPPIOCGRASYNCMAP:
442                 if (put_user(ap->raccm, (u32 __user *)argp))
443                         break;
444                 err = 0;
445                 break;
446         case PPPIOCSRASYNCMAP:
447                 if (get_user(ap->raccm, (u32 __user *)argp))
448                         break;
449                 err = 0;
450                 break;
451
452         case PPPIOCGXASYNCMAP:
453                 if (copy_to_user(argp, ap->xaccm, sizeof(ap->xaccm)))
454                         break;
455                 err = 0;
456                 break;
457         case PPPIOCSXASYNCMAP:
458                 if (copy_from_user(accm, argp, sizeof(accm)))
459                         break;
460                 accm[2] &= ~0x40000000U;        /* can't escape 0x5e */
461                 accm[3] |= 0x60000000U;         /* must escape 0x7d, 0x7e */
462                 memcpy(ap->xaccm, accm, sizeof(ap->xaccm));
463                 err = 0;
464                 break;
465
466         case PPPIOCGMRU:
467                 if (put_user(ap->mru, p))
468                         break;
469                 err = 0;
470                 break;
471         case PPPIOCSMRU:
472                 if (get_user(val, p))
473                         break;
474                 if (val < PPP_MRU)
475                         val = PPP_MRU;
476                 ap->mru = val;
477                 err = 0;
478                 break;
479
480         default:
481                 err = -ENOTTY;
482         }
483
484         return err;
485 }
486
487 /*
488  * This is called at softirq level to deliver received packets
489  * to the ppp_generic code, and to tell the ppp_generic code
490  * if we can accept more output now.
491  */
492 static void ppp_async_process(struct tasklet_struct *t)
493 {
494         struct asyncppp *ap = from_tasklet(ap, t, tsk);
495         struct sk_buff *skb;
496
497         /* process received packets */
498         while ((skb = skb_dequeue(&ap->rqueue)) != NULL) {
499                 if (skb->cb[0])
500                         ppp_input_error(&ap->chan, 0);
501                 ppp_input(&ap->chan, skb);
502         }
503
504         /* try to push more stuff out */
505         if (test_bit(XMIT_WAKEUP, &ap->xmit_flags) && ppp_async_push(ap))
506                 ppp_output_wakeup(&ap->chan);
507 }
508
509 /*
510  * Procedures for encapsulation and framing.
511  */
512
513 /*
514  * Procedure to encode the data for async serial transmission.
515  * Does octet stuffing (escaping), puts the address/control bytes
516  * on if A/C compression is disabled, and does protocol compression.
517  * Assumes ap->tpkt != 0 on entry.
518  * Returns 1 if we finished the current frame, 0 otherwise.
519  */
520
521 #define PUT_BYTE(ap, buf, c, islcp)     do {            \
522         if ((islcp && c < 0x20) || (ap->xaccm[c >> 5] & (1 << (c & 0x1f)))) {\
523                 *buf++ = PPP_ESCAPE;                    \
524                 *buf++ = c ^ PPP_TRANS;                 \
525         } else                                          \
526                 *buf++ = c;                             \
527 } while (0)
528
529 static int
530 ppp_async_encode(struct asyncppp *ap)
531 {
532         int fcs, i, count, c, proto;
533         unsigned char *buf, *buflim;
534         unsigned char *data;
535         int islcp;
536
537         buf = ap->obuf;
538         ap->olim = buf;
539         ap->optr = buf;
540         i = ap->tpkt_pos;
541         data = ap->tpkt->data;
542         count = ap->tpkt->len;
543         fcs = ap->tfcs;
544         proto = get_unaligned_be16(data);
545
546         /*
547          * LCP packets with code values between 1 (configure-reqest)
548          * and 7 (code-reject) must be sent as though no options
549          * had been negotiated.
550          */
551         islcp = proto == PPP_LCP && 1 <= data[2] && data[2] <= 7;
552
553         if (i == 0) {
554                 if (islcp)
555                         async_lcp_peek(ap, data, count, 0);
556
557                 /*
558                  * Start of a new packet - insert the leading FLAG
559                  * character if necessary.
560                  */
561                 if (islcp || flag_time == 0 ||
562                     time_after_eq(jiffies, ap->last_xmit + flag_time))
563                         *buf++ = PPP_FLAG;
564                 ap->last_xmit = jiffies;
565                 fcs = PPP_INITFCS;
566
567                 /*
568                  * Put in the address/control bytes if necessary
569                  */
570                 if ((ap->flags & SC_COMP_AC) == 0 || islcp) {
571                         PUT_BYTE(ap, buf, 0xff, islcp);
572                         fcs = PPP_FCS(fcs, 0xff);
573                         PUT_BYTE(ap, buf, 0x03, islcp);
574                         fcs = PPP_FCS(fcs, 0x03);
575                 }
576         }
577
578         /*
579          * Once we put in the last byte, we need to put in the FCS
580          * and closing flag, so make sure there is at least 7 bytes
581          * of free space in the output buffer.
582          */
583         buflim = ap->obuf + OBUFSIZE - 6;
584         while (i < count && buf < buflim) {
585                 c = data[i++];
586                 if (i == 1 && c == 0 && (ap->flags & SC_COMP_PROT))
587                         continue;       /* compress protocol field */
588                 fcs = PPP_FCS(fcs, c);
589                 PUT_BYTE(ap, buf, c, islcp);
590         }
591
592         if (i < count) {
593                 /*
594                  * Remember where we are up to in this packet.
595                  */
596                 ap->olim = buf;
597                 ap->tpkt_pos = i;
598                 ap->tfcs = fcs;
599                 return 0;
600         }
601
602         /*
603          * We have finished the packet.  Add the FCS and flag.
604          */
605         fcs = ~fcs;
606         c = fcs & 0xff;
607         PUT_BYTE(ap, buf, c, islcp);
608         c = (fcs >> 8) & 0xff;
609         PUT_BYTE(ap, buf, c, islcp);
610         *buf++ = PPP_FLAG;
611         ap->olim = buf;
612
613         consume_skb(ap->tpkt);
614         ap->tpkt = NULL;
615         return 1;
616 }
617
618 /*
619  * Transmit-side routines.
620  */
621
622 /*
623  * Send a packet to the peer over an async tty line.
624  * Returns 1 iff the packet was accepted.
625  * If the packet was not accepted, we will call ppp_output_wakeup
626  * at some later time.
627  */
628 static int
629 ppp_async_send(struct ppp_channel *chan, struct sk_buff *skb)
630 {
631         struct asyncppp *ap = chan->private;
632
633         ppp_async_push(ap);
634
635         if (test_and_set_bit(XMIT_FULL, &ap->xmit_flags))
636                 return 0;       /* already full */
637         ap->tpkt = skb;
638         ap->tpkt_pos = 0;
639
640         ppp_async_push(ap);
641         return 1;
642 }
643
644 /*
645  * Push as much data as possible out to the tty.
646  */
647 static int
648 ppp_async_push(struct asyncppp *ap)
649 {
650         int avail, sent, done = 0;
651         struct tty_struct *tty = ap->tty;
652         int tty_stuffed = 0;
653
654         /*
655          * We can get called recursively here if the tty write
656          * function calls our wakeup function.  This can happen
657          * for example on a pty with both the master and slave
658          * set to PPP line discipline.
659          * We use the XMIT_BUSY bit to detect this and get out,
660          * leaving the XMIT_WAKEUP bit set to tell the other
661          * instance that it may now be able to write more now.
662          */
663         if (test_and_set_bit(XMIT_BUSY, &ap->xmit_flags))
664                 return 0;
665         spin_lock_bh(&ap->xmit_lock);
666         for (;;) {
667                 if (test_and_clear_bit(XMIT_WAKEUP, &ap->xmit_flags))
668                         tty_stuffed = 0;
669                 if (!tty_stuffed && ap->optr < ap->olim) {
670                         avail = ap->olim - ap->optr;
671                         set_bit(TTY_DO_WRITE_WAKEUP, &tty->flags);
672                         sent = tty->ops->write(tty, ap->optr, avail);
673                         if (sent < 0)
674                                 goto flush;     /* error, e.g. loss of CD */
675                         ap->optr += sent;
676                         if (sent < avail)
677                                 tty_stuffed = 1;
678                         continue;
679                 }
680                 if (ap->optr >= ap->olim && ap->tpkt) {
681                         if (ppp_async_encode(ap)) {
682                                 /* finished processing ap->tpkt */
683                                 clear_bit(XMIT_FULL, &ap->xmit_flags);
684                                 done = 1;
685                         }
686                         continue;
687                 }
688                 /*
689                  * We haven't made any progress this time around.
690                  * Clear XMIT_BUSY to let other callers in, but
691                  * after doing so we have to check if anyone set
692                  * XMIT_WAKEUP since we last checked it.  If they
693                  * did, we should try again to set XMIT_BUSY and go
694                  * around again in case XMIT_BUSY was still set when
695                  * the other caller tried.
696                  */
697                 clear_bit(XMIT_BUSY, &ap->xmit_flags);
698                 /* any more work to do? if not, exit the loop */
699                 if (!(test_bit(XMIT_WAKEUP, &ap->xmit_flags) ||
700                       (!tty_stuffed && ap->tpkt)))
701                         break;
702                 /* more work to do, see if we can do it now */
703                 if (test_and_set_bit(XMIT_BUSY, &ap->xmit_flags))
704                         break;
705         }
706         spin_unlock_bh(&ap->xmit_lock);
707         return done;
708
709 flush:
710         clear_bit(XMIT_BUSY, &ap->xmit_flags);
711         if (ap->tpkt) {
712                 kfree_skb(ap->tpkt);
713                 ap->tpkt = NULL;
714                 clear_bit(XMIT_FULL, &ap->xmit_flags);
715                 done = 1;
716         }
717         ap->optr = ap->olim;
718         spin_unlock_bh(&ap->xmit_lock);
719         return done;
720 }
721
722 /*
723  * Flush output from our internal buffers.
724  * Called for the TCFLSH ioctl. Can be entered in parallel
725  * but this is covered by the xmit_lock.
726  */
727 static void
728 ppp_async_flush_output(struct asyncppp *ap)
729 {
730         int done = 0;
731
732         spin_lock_bh(&ap->xmit_lock);
733         ap->optr = ap->olim;
734         if (ap->tpkt != NULL) {
735                 kfree_skb(ap->tpkt);
736                 ap->tpkt = NULL;
737                 clear_bit(XMIT_FULL, &ap->xmit_flags);
738                 done = 1;
739         }
740         spin_unlock_bh(&ap->xmit_lock);
741         if (done)
742                 ppp_output_wakeup(&ap->chan);
743 }
744
745 /*
746  * Receive-side routines.
747  */
748
749 /* see how many ordinary chars there are at the start of buf */
750 static inline int
751 scan_ordinary(struct asyncppp *ap, const unsigned char *buf, int count)
752 {
753         int i, c;
754
755         for (i = 0; i < count; ++i) {
756                 c = buf[i];
757                 if (c == PPP_ESCAPE || c == PPP_FLAG ||
758                     (c < 0x20 && (ap->raccm & (1 << c)) != 0))
759                         break;
760         }
761         return i;
762 }
763
764 /* called when a flag is seen - do end-of-packet processing */
765 static void
766 process_input_packet(struct asyncppp *ap)
767 {
768         struct sk_buff *skb;
769         unsigned char *p;
770         unsigned int len, fcs;
771
772         skb = ap->rpkt;
773         if (ap->state & (SC_TOSS | SC_ESCAPE))
774                 goto err;
775
776         if (skb == NULL)
777                 return;         /* 0-length packet */
778
779         /* check the FCS */
780         p = skb->data;
781         len = skb->len;
782         if (len < 3)
783                 goto err;       /* too short */
784         fcs = PPP_INITFCS;
785         for (; len > 0; --len)
786                 fcs = PPP_FCS(fcs, *p++);
787         if (fcs != PPP_GOODFCS)
788                 goto err;       /* bad FCS */
789         skb_trim(skb, skb->len - 2);
790
791         /* check for address/control and protocol compression */
792         p = skb->data;
793         if (p[0] == PPP_ALLSTATIONS) {
794                 /* chop off address/control */
795                 if (p[1] != PPP_UI || skb->len < 3)
796                         goto err;
797                 p = skb_pull(skb, 2);
798         }
799
800         /* If protocol field is not compressed, it can be LCP packet */
801         if (!(p[0] & 0x01)) {
802                 unsigned int proto;
803
804                 if (skb->len < 2)
805                         goto err;
806                 proto = (p[0] << 8) + p[1];
807                 if (proto == PPP_LCP)
808                         async_lcp_peek(ap, p, skb->len, 1);
809         }
810
811         /* queue the frame to be processed */
812         skb->cb[0] = ap->state;
813         skb_queue_tail(&ap->rqueue, skb);
814         ap->rpkt = NULL;
815         ap->state = 0;
816         return;
817
818  err:
819         /* frame had an error, remember that, reset SC_TOSS & SC_ESCAPE */
820         ap->state = SC_PREV_ERROR;
821         if (skb) {
822                 /* make skb appear as freshly allocated */
823                 skb_trim(skb, 0);
824                 skb_reserve(skb, - skb_headroom(skb));
825         }
826 }
827
828 /* Called when the tty driver has data for us. Runs parallel with the
829    other ldisc functions but will not be re-entered */
830
831 static void
832 ppp_async_input(struct asyncppp *ap, const unsigned char *buf,
833                 char *flags, int count)
834 {
835         struct sk_buff *skb;
836         int c, i, j, n, s, f;
837         unsigned char *sp;
838
839         /* update bits used for 8-bit cleanness detection */
840         if (~ap->rbits & SC_RCV_BITS) {
841                 s = 0;
842                 for (i = 0; i < count; ++i) {
843                         c = buf[i];
844                         if (flags && flags[i] != 0)
845                                 continue;
846                         s |= (c & 0x80)? SC_RCV_B7_1: SC_RCV_B7_0;
847                         c = ((c >> 4) ^ c) & 0xf;
848                         s |= (0x6996 & (1 << c))? SC_RCV_ODDP: SC_RCV_EVNP;
849                 }
850                 ap->rbits |= s;
851         }
852
853         while (count > 0) {
854                 /* scan through and see how many chars we can do in bulk */
855                 if ((ap->state & SC_ESCAPE) && buf[0] == PPP_ESCAPE)
856                         n = 1;
857                 else
858                         n = scan_ordinary(ap, buf, count);
859
860                 f = 0;
861                 if (flags && (ap->state & SC_TOSS) == 0) {
862                         /* check the flags to see if any char had an error */
863                         for (j = 0; j < n; ++j)
864                                 if ((f = flags[j]) != 0)
865                                         break;
866                 }
867                 if (f != 0) {
868                         /* start tossing */
869                         ap->state |= SC_TOSS;
870
871                 } else if (n > 0 && (ap->state & SC_TOSS) == 0) {
872                         /* stuff the chars in the skb */
873                         skb = ap->rpkt;
874                         if (!skb) {
875                                 skb = dev_alloc_skb(ap->mru + PPP_HDRLEN + 2);
876                                 if (!skb)
877                                         goto nomem;
878                                 ap->rpkt = skb;
879                         }
880                         if (skb->len == 0) {
881                                 /* Try to get the payload 4-byte aligned.
882                                  * This should match the
883                                  * PPP_ALLSTATIONS/PPP_UI/compressed tests in
884                                  * process_input_packet, but we do not have
885                                  * enough chars here to test buf[1] and buf[2].
886                                  */
887                                 if (buf[0] != PPP_ALLSTATIONS)
888                                         skb_reserve(skb, 2 + (buf[0] & 1));
889                         }
890                         if (n > skb_tailroom(skb)) {
891                                 /* packet overflowed MRU */
892                                 ap->state |= SC_TOSS;
893                         } else {
894                                 sp = skb_put_data(skb, buf, n);
895                                 if (ap->state & SC_ESCAPE) {
896                                         sp[0] ^= PPP_TRANS;
897                                         ap->state &= ~SC_ESCAPE;
898                                 }
899                         }
900                 }
901
902                 if (n >= count)
903                         break;
904
905                 c = buf[n];
906                 if (flags != NULL && flags[n] != 0) {
907                         ap->state |= SC_TOSS;
908                 } else if (c == PPP_FLAG) {
909                         process_input_packet(ap);
910                 } else if (c == PPP_ESCAPE) {
911                         ap->state |= SC_ESCAPE;
912                 } else if (I_IXON(ap->tty)) {
913                         if (c == START_CHAR(ap->tty))
914                                 start_tty(ap->tty);
915                         else if (c == STOP_CHAR(ap->tty))
916                                 stop_tty(ap->tty);
917                 }
918                 /* otherwise it's a char in the recv ACCM */
919                 ++n;
920
921                 buf += n;
922                 if (flags)
923                         flags += n;
924                 count -= n;
925         }
926         return;
927
928  nomem:
929         printk(KERN_ERR "PPPasync: no memory (input pkt)\n");
930         ap->state |= SC_TOSS;
931 }
932
933 /*
934  * We look at LCP frames going past so that we can notice
935  * and react to the LCP configure-ack from the peer.
936  * In the situation where the peer has been sent a configure-ack
937  * already, LCP is up once it has sent its configure-ack
938  * so the immediately following packet can be sent with the
939  * configured LCP options.  This allows us to process the following
940  * packet correctly without pppd needing to respond quickly.
941  *
942  * We only respond to the received configure-ack if we have just
943  * sent a configure-request, and the configure-ack contains the
944  * same data (this is checked using a 16-bit crc of the data).
945  */
946 #define CONFREQ         1       /* LCP code field values */
947 #define CONFACK         2
948 #define LCP_MRU         1       /* LCP option numbers */
949 #define LCP_ASYNCMAP    2
950
951 static void async_lcp_peek(struct asyncppp *ap, unsigned char *data,
952                            int len, int inbound)
953 {
954         int dlen, fcs, i, code;
955         u32 val;
956
957         data += 2;              /* skip protocol bytes */
958         len -= 2;
959         if (len < 4)            /* 4 = code, ID, length */
960                 return;
961         code = data[0];
962         if (code != CONFACK && code != CONFREQ)
963                 return;
964         dlen = get_unaligned_be16(data + 2);
965         if (len < dlen)
966                 return;         /* packet got truncated or length is bogus */
967
968         if (code == (inbound? CONFACK: CONFREQ)) {
969                 /*
970                  * sent confreq or received confack:
971                  * calculate the crc of the data from the ID field on.
972                  */
973                 fcs = PPP_INITFCS;
974                 for (i = 1; i < dlen; ++i)
975                         fcs = PPP_FCS(fcs, data[i]);
976
977                 if (!inbound) {
978                         /* outbound confreq - remember the crc for later */
979                         ap->lcp_fcs = fcs;
980                         return;
981                 }
982
983                 /* received confack, check the crc */
984                 fcs ^= ap->lcp_fcs;
985                 ap->lcp_fcs = -1;
986                 if (fcs != 0)
987                         return;
988         } else if (inbound)
989                 return; /* not interested in received confreq */
990
991         /* process the options in the confack */
992         data += 4;
993         dlen -= 4;
994         /* data[0] is code, data[1] is length */
995         while (dlen >= 2 && dlen >= data[1] && data[1] >= 2) {
996                 switch (data[0]) {
997                 case LCP_MRU:
998                         val = get_unaligned_be16(data + 2);
999                         if (inbound)
1000                                 ap->mru = val;
1001                         else
1002                                 ap->chan.mtu = val;
1003                         break;
1004                 case LCP_ASYNCMAP:
1005                         val = get_unaligned_be32(data + 2);
1006                         if (inbound)
1007                                 ap->raccm = val;
1008                         else
1009                                 ap->xaccm[0] = val;
1010                         break;
1011                 }
1012                 dlen -= data[1];
1013                 data += data[1];
1014         }
1015 }
1016
1017 static void __exit ppp_async_cleanup(void)
1018 {
1019         if (tty_unregister_ldisc(N_PPP) != 0)
1020                 printk(KERN_ERR "failed to unregister PPP line discipline\n");
1021 }
1022
1023 module_init(ppp_async_init);
1024 module_exit(ppp_async_cleanup);