1 // SPDX-License-Identifier: GPL-2.0
3 * phylink models the MAC to optional PHY connection, supporting
4 * technologies such as SFP cages where the PHY is hot-pluggable.
6 * Copyright (C) 2015 Russell King
8 #include <linux/ethtool.h>
9 #include <linux/export.h>
10 #include <linux/gpio/consumer.h>
11 #include <linux/netdevice.h>
13 #include <linux/of_mdio.h>
14 #include <linux/phy.h>
15 #include <linux/phy_fixed.h>
16 #include <linux/phylink.h>
17 #include <linux/rtnetlink.h>
18 #include <linux/spinlock.h>
19 #include <linux/timer.h>
20 #include <linux/workqueue.h>
25 #define SUPPORTED_INTERFACES \
26 (SUPPORTED_TP | SUPPORTED_MII | SUPPORTED_FIBRE | \
27 SUPPORTED_BNC | SUPPORTED_AUI | SUPPORTED_Backplane)
28 #define ADVERTISED_INTERFACES \
29 (ADVERTISED_TP | ADVERTISED_MII | ADVERTISED_FIBRE | \
30 ADVERTISED_BNC | ADVERTISED_AUI | ADVERTISED_Backplane)
33 PHYLINK_DISABLE_STOPPED,
38 * struct phylink - internal data type for phylink
42 struct net_device *netdev;
43 const struct phylink_mac_ops *ops;
44 struct phylink_config *config;
46 unsigned int old_link_state:1;
48 unsigned long phylink_disable_state; /* bitmask of disables */
49 struct phy_device *phydev;
50 phy_interface_t link_interface; /* PHY_INTERFACE_xxx */
51 u8 link_an_mode; /* MLO_AN_xxx */
52 u8 link_port; /* The current non-phy ethtool port */
53 __ETHTOOL_DECLARE_LINK_MODE_MASK(supported);
55 /* The link configuration settings */
56 struct phylink_link_state link_config;
58 /* The current settings */
59 phy_interface_t cur_interface;
61 struct gpio_desc *link_gpio;
62 unsigned int link_irq;
63 struct timer_list link_poll;
64 void (*get_fixed_state)(struct net_device *dev,
65 struct phylink_link_state *s);
67 struct mutex state_mutex;
68 struct phylink_link_state phy_state;
69 struct work_struct resolve;
71 bool mac_link_dropped;
73 struct sfp_bus *sfp_bus;
76 #define phylink_printk(level, pl, fmt, ...) \
78 if ((pl)->config->type == PHYLINK_NETDEV) \
79 netdev_printk(level, (pl)->netdev, fmt, ##__VA_ARGS__); \
80 else if ((pl)->config->type == PHYLINK_DEV) \
81 dev_printk(level, (pl)->dev, fmt, ##__VA_ARGS__); \
84 #define phylink_err(pl, fmt, ...) \
85 phylink_printk(KERN_ERR, pl, fmt, ##__VA_ARGS__)
86 #define phylink_warn(pl, fmt, ...) \
87 phylink_printk(KERN_WARNING, pl, fmt, ##__VA_ARGS__)
88 #define phylink_info(pl, fmt, ...) \
89 phylink_printk(KERN_INFO, pl, fmt, ##__VA_ARGS__)
90 #if defined(CONFIG_DYNAMIC_DEBUG)
91 #define phylink_dbg(pl, fmt, ...) \
93 if ((pl)->config->type == PHYLINK_NETDEV) \
94 netdev_dbg((pl)->netdev, fmt, ##__VA_ARGS__); \
95 else if ((pl)->config->type == PHYLINK_DEV) \
96 dev_dbg((pl)->dev, fmt, ##__VA_ARGS__); \
99 #define phylink_dbg(pl, fmt, ...) \
100 phylink_printk(KERN_DEBUG, pl, fmt, ##__VA_ARGS__)
102 #define phylink_dbg(pl, fmt, ...) \
105 phylink_printk(KERN_DEBUG, pl, fmt, ##__VA_ARGS__); \
110 * phylink_set_port_modes() - set the port type modes in the ethtool mask
111 * @mask: ethtool link mode mask
113 * Sets all the port type modes in the ethtool mask. MAC drivers should
114 * use this in their 'validate' callback.
116 void phylink_set_port_modes(unsigned long *mask)
118 phylink_set(mask, TP);
119 phylink_set(mask, AUI);
120 phylink_set(mask, MII);
121 phylink_set(mask, FIBRE);
122 phylink_set(mask, BNC);
123 phylink_set(mask, Backplane);
125 EXPORT_SYMBOL_GPL(phylink_set_port_modes);
127 static int phylink_is_empty_linkmode(const unsigned long *linkmode)
129 __ETHTOOL_DECLARE_LINK_MODE_MASK(tmp) = { 0, };
131 phylink_set_port_modes(tmp);
132 phylink_set(tmp, Autoneg);
133 phylink_set(tmp, Pause);
134 phylink_set(tmp, Asym_Pause);
136 return linkmode_subset(linkmode, tmp);
139 static const char *phylink_an_mode_str(unsigned int mode)
141 static const char *modestr[] = {
142 [MLO_AN_PHY] = "phy",
143 [MLO_AN_FIXED] = "fixed",
144 [MLO_AN_INBAND] = "inband",
147 return mode < ARRAY_SIZE(modestr) ? modestr[mode] : "unknown";
150 static int phylink_validate(struct phylink *pl, unsigned long *supported,
151 struct phylink_link_state *state)
153 pl->ops->validate(pl->config, supported, state);
155 return phylink_is_empty_linkmode(supported) ? -EINVAL : 0;
158 static int phylink_parse_fixedlink(struct phylink *pl,
159 struct fwnode_handle *fwnode)
161 struct fwnode_handle *fixed_node;
162 const struct phy_setting *s;
163 struct gpio_desc *desc;
167 fixed_node = fwnode_get_named_child_node(fwnode, "fixed-link");
169 ret = fwnode_property_read_u32(fixed_node, "speed", &speed);
171 pl->link_config.speed = speed;
172 pl->link_config.duplex = DUPLEX_HALF;
174 if (fwnode_property_read_bool(fixed_node, "full-duplex"))
175 pl->link_config.duplex = DUPLEX_FULL;
177 /* We treat the "pause" and "asym-pause" terminology as
178 * defining the link partner's ability. */
179 if (fwnode_property_read_bool(fixed_node, "pause"))
180 pl->link_config.pause |= MLO_PAUSE_SYM;
181 if (fwnode_property_read_bool(fixed_node, "asym-pause"))
182 pl->link_config.pause |= MLO_PAUSE_ASYM;
185 desc = fwnode_get_named_gpiod(fixed_node, "link-gpios",
189 pl->link_gpio = desc;
190 else if (desc == ERR_PTR(-EPROBE_DEFER))
193 fwnode_handle_put(fixed_node);
200 ret = fwnode_property_read_u32_array(fwnode, "fixed-link",
202 if (ret != ARRAY_SIZE(prop)) {
203 phylink_err(pl, "broken fixed-link?\n");
207 ret = fwnode_property_read_u32_array(fwnode, "fixed-link",
208 prop, ARRAY_SIZE(prop));
210 pl->link_config.duplex = prop[1] ?
211 DUPLEX_FULL : DUPLEX_HALF;
212 pl->link_config.speed = prop[2];
214 pl->link_config.pause |= MLO_PAUSE_SYM;
216 pl->link_config.pause |= MLO_PAUSE_ASYM;
220 if (pl->link_config.speed > SPEED_1000 &&
221 pl->link_config.duplex != DUPLEX_FULL)
222 phylink_warn(pl, "fixed link specifies half duplex for %dMbps link?\n",
223 pl->link_config.speed);
225 bitmap_fill(pl->supported, __ETHTOOL_LINK_MODE_MASK_NBITS);
226 linkmode_copy(pl->link_config.advertising, pl->supported);
227 phylink_validate(pl, pl->supported, &pl->link_config);
229 s = phy_lookup_setting(pl->link_config.speed, pl->link_config.duplex,
230 pl->supported, true);
231 linkmode_zero(pl->supported);
232 phylink_set(pl->supported, MII);
233 phylink_set(pl->supported, Pause);
234 phylink_set(pl->supported, Asym_Pause);
236 __set_bit(s->bit, pl->supported);
238 phylink_warn(pl, "fixed link %s duplex %dMbps not recognised\n",
239 pl->link_config.duplex == DUPLEX_FULL ? "full" : "half",
240 pl->link_config.speed);
243 linkmode_and(pl->link_config.advertising, pl->link_config.advertising,
246 pl->link_config.link = 1;
247 pl->link_config.an_complete = 1;
252 static int phylink_parse_mode(struct phylink *pl, struct fwnode_handle *fwnode)
254 struct fwnode_handle *dn;
257 dn = fwnode_get_named_child_node(fwnode, "fixed-link");
258 if (dn || fwnode_property_present(fwnode, "fixed-link"))
259 pl->link_an_mode = MLO_AN_FIXED;
260 fwnode_handle_put(dn);
262 if (fwnode_property_read_string(fwnode, "managed", &managed) == 0 &&
263 strcmp(managed, "in-band-status") == 0) {
264 if (pl->link_an_mode == MLO_AN_FIXED) {
266 "can't use both fixed-link and in-band-status\n");
270 linkmode_zero(pl->supported);
271 phylink_set(pl->supported, MII);
272 phylink_set(pl->supported, Autoneg);
273 phylink_set(pl->supported, Asym_Pause);
274 phylink_set(pl->supported, Pause);
275 pl->link_config.an_enabled = true;
276 pl->link_an_mode = MLO_AN_INBAND;
278 switch (pl->link_config.interface) {
279 case PHY_INTERFACE_MODE_SGMII:
280 phylink_set(pl->supported, 10baseT_Half);
281 phylink_set(pl->supported, 10baseT_Full);
282 phylink_set(pl->supported, 100baseT_Half);
283 phylink_set(pl->supported, 100baseT_Full);
284 phylink_set(pl->supported, 1000baseT_Half);
285 phylink_set(pl->supported, 1000baseT_Full);
288 case PHY_INTERFACE_MODE_1000BASEX:
289 phylink_set(pl->supported, 1000baseX_Full);
292 case PHY_INTERFACE_MODE_2500BASEX:
293 phylink_set(pl->supported, 2500baseX_Full);
296 case PHY_INTERFACE_MODE_10GKR:
297 phylink_set(pl->supported, 10baseT_Half);
298 phylink_set(pl->supported, 10baseT_Full);
299 phylink_set(pl->supported, 100baseT_Half);
300 phylink_set(pl->supported, 100baseT_Full);
301 phylink_set(pl->supported, 1000baseT_Half);
302 phylink_set(pl->supported, 1000baseT_Full);
303 phylink_set(pl->supported, 1000baseX_Full);
304 phylink_set(pl->supported, 10000baseKR_Full);
305 phylink_set(pl->supported, 10000baseCR_Full);
306 phylink_set(pl->supported, 10000baseSR_Full);
307 phylink_set(pl->supported, 10000baseLR_Full);
308 phylink_set(pl->supported, 10000baseLRM_Full);
309 phylink_set(pl->supported, 10000baseER_Full);
314 "incorrect link mode %s for in-band status\n",
315 phy_modes(pl->link_config.interface));
319 linkmode_copy(pl->link_config.advertising, pl->supported);
321 if (phylink_validate(pl, pl->supported, &pl->link_config)) {
323 "failed to validate link configuration for in-band status\n");
331 static void phylink_mac_config(struct phylink *pl,
332 const struct phylink_link_state *state)
335 "%s: mode=%s/%s/%s/%s adv=%*pb pause=%02x link=%u an=%u\n",
336 __func__, phylink_an_mode_str(pl->link_an_mode),
337 phy_modes(state->interface),
338 phy_speed_to_str(state->speed),
339 phy_duplex_to_str(state->duplex),
340 __ETHTOOL_LINK_MODE_MASK_NBITS, state->advertising,
341 state->pause, state->link, state->an_enabled);
343 pl->ops->mac_config(pl->config, pl->link_an_mode, state);
346 static void phylink_mac_config_up(struct phylink *pl,
347 const struct phylink_link_state *state)
350 phylink_mac_config(pl, state);
353 static void phylink_mac_an_restart(struct phylink *pl)
355 if (pl->link_config.an_enabled &&
356 phy_interface_mode_is_8023z(pl->link_config.interface))
357 pl->ops->mac_an_restart(pl->config);
360 static int phylink_get_mac_state(struct phylink *pl, struct phylink_link_state *state)
363 linkmode_copy(state->advertising, pl->link_config.advertising);
364 linkmode_zero(state->lp_advertising);
365 state->interface = pl->link_config.interface;
366 state->an_enabled = pl->link_config.an_enabled;
367 state->speed = SPEED_UNKNOWN;
368 state->duplex = DUPLEX_UNKNOWN;
369 state->pause = MLO_PAUSE_NONE;
370 state->an_complete = 0;
373 return pl->ops->mac_link_state(pl->config, state);
376 /* The fixed state is... fixed except for the link state,
377 * which may be determined by a GPIO or a callback.
379 static void phylink_get_fixed_state(struct phylink *pl, struct phylink_link_state *state)
381 *state = pl->link_config;
382 if (pl->get_fixed_state)
383 pl->get_fixed_state(pl->netdev, state);
384 else if (pl->link_gpio)
385 state->link = !!gpiod_get_value_cansleep(pl->link_gpio);
388 /* Flow control is resolved according to our and the link partners
389 * advertisements using the following drawn from the 802.3 specs:
390 * Local device Link partner
391 * Pause AsymDir Pause AsymDir Result
396 static void phylink_resolve_flow(struct phylink *pl,
397 struct phylink_link_state *state)
401 if (pl->link_config.pause & MLO_PAUSE_AN) {
404 if (phylink_test(pl->link_config.advertising, Pause))
405 pause |= MLO_PAUSE_SYM;
406 if (phylink_test(pl->link_config.advertising, Asym_Pause))
407 pause |= MLO_PAUSE_ASYM;
409 pause &= state->pause;
411 if (pause & MLO_PAUSE_SYM)
412 new_pause = MLO_PAUSE_TX | MLO_PAUSE_RX;
413 else if (pause & MLO_PAUSE_ASYM)
414 new_pause = state->pause & MLO_PAUSE_SYM ?
415 MLO_PAUSE_TX : MLO_PAUSE_RX;
417 new_pause = pl->link_config.pause & MLO_PAUSE_TXRX_MASK;
420 state->pause &= ~MLO_PAUSE_TXRX_MASK;
421 state->pause |= new_pause;
424 static const char *phylink_pause_to_str(int pause)
426 switch (pause & MLO_PAUSE_TXRX_MASK) {
427 case MLO_PAUSE_TX | MLO_PAUSE_RX:
438 static void phylink_mac_link_up(struct phylink *pl,
439 struct phylink_link_state link_state)
441 struct net_device *ndev = pl->netdev;
443 pl->cur_interface = link_state.interface;
444 pl->ops->mac_link_up(pl->config, pl->link_an_mode,
445 pl->phy_state.interface,
449 netif_carrier_on(ndev);
452 "Link is Up - %s/%s - flow control %s\n",
453 phy_speed_to_str(link_state.speed),
454 phy_duplex_to_str(link_state.duplex),
455 phylink_pause_to_str(link_state.pause));
458 static void phylink_mac_link_down(struct phylink *pl)
460 struct net_device *ndev = pl->netdev;
463 netif_carrier_off(ndev);
464 pl->ops->mac_link_down(pl->config, pl->link_an_mode,
466 phylink_info(pl, "Link is Down\n");
469 static void phylink_resolve(struct work_struct *w)
471 struct phylink *pl = container_of(w, struct phylink, resolve);
472 struct phylink_link_state link_state;
473 struct net_device *ndev = pl->netdev;
476 mutex_lock(&pl->state_mutex);
477 if (pl->phylink_disable_state) {
478 pl->mac_link_dropped = false;
479 link_state.link = false;
480 } else if (pl->mac_link_dropped) {
481 link_state.link = false;
483 switch (pl->link_an_mode) {
485 link_state = pl->phy_state;
486 phylink_resolve_flow(pl, &link_state);
487 phylink_mac_config_up(pl, &link_state);
491 phylink_get_fixed_state(pl, &link_state);
492 phylink_mac_config_up(pl, &link_state);
496 phylink_get_mac_state(pl, &link_state);
498 /* If we have a phy, the "up" state is the union of
499 * both the PHY and the MAC */
501 link_state.link &= pl->phy_state.link;
503 /* Only update if the PHY link is up */
504 if (pl->phydev && pl->phy_state.link) {
505 link_state.interface = pl->phy_state.interface;
507 /* If we have a PHY, we need to update with
508 * the pause mode bits. */
509 link_state.pause |= pl->phy_state.pause;
510 phylink_resolve_flow(pl, &link_state);
511 phylink_mac_config(pl, &link_state);
518 link_changed = (link_state.link != netif_carrier_ok(ndev));
520 link_changed = (link_state.link != pl->old_link_state);
523 pl->old_link_state = link_state.link;
524 if (!link_state.link)
525 phylink_mac_link_down(pl);
527 phylink_mac_link_up(pl, link_state);
529 if (!link_state.link && pl->mac_link_dropped) {
530 pl->mac_link_dropped = false;
531 queue_work(system_power_efficient_wq, &pl->resolve);
533 mutex_unlock(&pl->state_mutex);
536 static void phylink_run_resolve(struct phylink *pl)
538 if (!pl->phylink_disable_state)
539 queue_work(system_power_efficient_wq, &pl->resolve);
542 static void phylink_run_resolve_and_disable(struct phylink *pl, int bit)
544 unsigned long state = pl->phylink_disable_state;
546 set_bit(bit, &pl->phylink_disable_state);
548 queue_work(system_power_efficient_wq, &pl->resolve);
549 flush_work(&pl->resolve);
553 static void phylink_fixed_poll(struct timer_list *t)
555 struct phylink *pl = container_of(t, struct phylink, link_poll);
557 mod_timer(t, jiffies + HZ);
559 phylink_run_resolve(pl);
562 static const struct sfp_upstream_ops sfp_phylink_ops;
564 static int phylink_register_sfp(struct phylink *pl,
565 struct fwnode_handle *fwnode)
570 bus = sfp_register_upstream_node(fwnode, pl, &sfp_phylink_ops);
573 phylink_err(pl, "unable to attach SFP bus: %d\n", ret);
583 * phylink_create() - create a phylink instance
584 * @config: a pointer to the target &struct phylink_config
585 * @fwnode: a pointer to a &struct fwnode_handle describing the network
587 * @iface: the desired link mode defined by &typedef phy_interface_t
588 * @ops: a pointer to a &struct phylink_mac_ops for the MAC.
590 * Create a new phylink instance, and parse the link parameters found in @np.
591 * This will parse in-band modes, fixed-link or SFP configuration.
593 * Returns a pointer to a &struct phylink, or an error-pointer value. Users
594 * must use IS_ERR() to check for errors from this function.
596 struct phylink *phylink_create(struct phylink_config *config,
597 struct fwnode_handle *fwnode,
598 phy_interface_t iface,
599 const struct phylink_mac_ops *ops)
604 pl = kzalloc(sizeof(*pl), GFP_KERNEL);
606 return ERR_PTR(-ENOMEM);
608 mutex_init(&pl->state_mutex);
609 INIT_WORK(&pl->resolve, phylink_resolve);
612 if (config->type == PHYLINK_NETDEV) {
613 pl->netdev = to_net_dev(config->dev);
614 } else if (config->type == PHYLINK_DEV) {
615 pl->dev = config->dev;
618 return ERR_PTR(-EINVAL);
621 pl->phy_state.interface = iface;
622 pl->link_interface = iface;
623 if (iface == PHY_INTERFACE_MODE_MOCA)
624 pl->link_port = PORT_BNC;
626 pl->link_port = PORT_MII;
627 pl->link_config.interface = iface;
628 pl->link_config.pause = MLO_PAUSE_AN;
629 pl->link_config.speed = SPEED_UNKNOWN;
630 pl->link_config.duplex = DUPLEX_UNKNOWN;
631 pl->link_config.an_enabled = true;
633 __set_bit(PHYLINK_DISABLE_STOPPED, &pl->phylink_disable_state);
634 timer_setup(&pl->link_poll, phylink_fixed_poll, 0);
636 bitmap_fill(pl->supported, __ETHTOOL_LINK_MODE_MASK_NBITS);
637 linkmode_copy(pl->link_config.advertising, pl->supported);
638 phylink_validate(pl, pl->supported, &pl->link_config);
640 ret = phylink_parse_mode(pl, fwnode);
646 if (pl->link_an_mode == MLO_AN_FIXED) {
647 ret = phylink_parse_fixedlink(pl, fwnode);
654 ret = phylink_register_sfp(pl, fwnode);
662 EXPORT_SYMBOL_GPL(phylink_create);
665 * phylink_destroy() - cleanup and destroy the phylink instance
666 * @pl: a pointer to a &struct phylink returned from phylink_create()
668 * Destroy a phylink instance. Any PHY that has been attached must have been
669 * cleaned up via phylink_disconnect_phy() prior to calling this function.
671 void phylink_destroy(struct phylink *pl)
674 sfp_unregister_upstream(pl->sfp_bus);
676 gpiod_put(pl->link_gpio);
678 cancel_work_sync(&pl->resolve);
681 EXPORT_SYMBOL_GPL(phylink_destroy);
683 static void phylink_phy_change(struct phy_device *phydev, bool up,
686 struct phylink *pl = phydev->phylink;
688 mutex_lock(&pl->state_mutex);
689 pl->phy_state.speed = phydev->speed;
690 pl->phy_state.duplex = phydev->duplex;
691 pl->phy_state.pause = MLO_PAUSE_NONE;
693 pl->phy_state.pause |= MLO_PAUSE_SYM;
694 if (phydev->asym_pause)
695 pl->phy_state.pause |= MLO_PAUSE_ASYM;
696 pl->phy_state.interface = phydev->interface;
697 pl->phy_state.link = up;
698 mutex_unlock(&pl->state_mutex);
700 phylink_run_resolve(pl);
702 phylink_dbg(pl, "phy link %s %s/%s/%s\n", up ? "up" : "down",
703 phy_modes(phydev->interface),
704 phy_speed_to_str(phydev->speed),
705 phy_duplex_to_str(phydev->duplex));
708 static int phylink_bringup_phy(struct phylink *pl, struct phy_device *phy)
710 struct phylink_link_state config;
711 __ETHTOOL_DECLARE_LINK_MODE_MASK(supported);
714 memset(&config, 0, sizeof(config));
715 linkmode_copy(supported, phy->supported);
716 linkmode_copy(config.advertising, phy->advertising);
717 config.interface = pl->link_config.interface;
720 * This is the new way of dealing with flow control for PHYs,
721 * as described by Timur Tabi in commit 529ed1275263 ("net: phy:
722 * phy drivers should not set SUPPORTED_[Asym_]Pause") except
723 * using our validate call to the MAC, we rely upon the MAC
724 * clearing the bits from both supported and advertising fields.
726 if (phylink_test(supported, Pause))
727 phylink_set(config.advertising, Pause);
728 if (phylink_test(supported, Asym_Pause))
729 phylink_set(config.advertising, Asym_Pause);
731 ret = phylink_validate(pl, supported, &config);
736 phy->phy_link_change = phylink_phy_change;
739 "PHY [%s] driver [%s]\n", dev_name(&phy->mdio.dev),
742 mutex_lock(&phy->lock);
743 mutex_lock(&pl->state_mutex);
745 linkmode_copy(pl->supported, supported);
746 linkmode_copy(pl->link_config.advertising, config.advertising);
748 /* Restrict the phy advertisement according to the MAC support. */
749 linkmode_copy(phy->advertising, config.advertising);
750 mutex_unlock(&pl->state_mutex);
751 mutex_unlock(&phy->lock);
754 "phy: setting supported %*pb advertising %*pb\n",
755 __ETHTOOL_LINK_MODE_MASK_NBITS, pl->supported,
756 __ETHTOOL_LINK_MODE_MASK_NBITS, phy->advertising);
758 if (phy_interrupt_is_valid(phy))
759 phy_request_interrupt(phy);
764 static int __phylink_connect_phy(struct phylink *pl, struct phy_device *phy,
765 phy_interface_t interface)
769 if (WARN_ON(pl->link_an_mode == MLO_AN_FIXED ||
770 (pl->link_an_mode == MLO_AN_INBAND &&
771 phy_interface_mode_is_8023z(interface))))
777 ret = phy_attach_direct(pl->netdev, phy, 0, interface);
781 ret = phylink_bringup_phy(pl, phy);
789 * phylink_connect_phy() - connect a PHY to the phylink instance
790 * @pl: a pointer to a &struct phylink returned from phylink_create()
791 * @phy: a pointer to a &struct phy_device.
793 * Connect @phy to the phylink instance specified by @pl by calling
794 * phy_attach_direct(). Configure the @phy according to the MAC driver's
795 * capabilities, start the PHYLIB state machine and enable any interrupts
796 * that the PHY supports.
798 * This updates the phylink's ethtool supported and advertising link mode
801 * Returns 0 on success or a negative errno.
803 int phylink_connect_phy(struct phylink *pl, struct phy_device *phy)
805 /* Use PHY device/driver interface */
806 if (pl->link_interface == PHY_INTERFACE_MODE_NA) {
807 pl->link_interface = phy->interface;
808 pl->link_config.interface = pl->link_interface;
811 return __phylink_connect_phy(pl, phy, pl->link_interface);
813 EXPORT_SYMBOL_GPL(phylink_connect_phy);
816 * phylink_of_phy_connect() - connect the PHY specified in the DT mode.
817 * @pl: a pointer to a &struct phylink returned from phylink_create()
818 * @dn: a pointer to a &struct device_node.
819 * @flags: PHY-specific flags to communicate to the PHY device driver
821 * Connect the phy specified in the device node @dn to the phylink instance
822 * specified by @pl. Actions specified in phylink_connect_phy() will be
825 * Returns 0 on success or a negative errno.
827 int phylink_of_phy_connect(struct phylink *pl, struct device_node *dn,
830 struct device_node *phy_node;
831 struct phy_device *phy_dev;
834 /* Fixed links and 802.3z are handled without needing a PHY */
835 if (pl->link_an_mode == MLO_AN_FIXED ||
836 (pl->link_an_mode == MLO_AN_INBAND &&
837 phy_interface_mode_is_8023z(pl->link_interface)))
840 phy_node = of_parse_phandle(dn, "phy-handle", 0);
842 phy_node = of_parse_phandle(dn, "phy", 0);
844 phy_node = of_parse_phandle(dn, "phy-device", 0);
847 if (pl->link_an_mode == MLO_AN_PHY)
852 phy_dev = of_phy_attach(pl->netdev, phy_node, flags,
854 /* We're done with the phy_node handle */
855 of_node_put(phy_node);
860 ret = phylink_bringup_phy(pl, phy_dev);
866 EXPORT_SYMBOL_GPL(phylink_of_phy_connect);
869 * phylink_disconnect_phy() - disconnect any PHY attached to the phylink
871 * @pl: a pointer to a &struct phylink returned from phylink_create()
873 * Disconnect any current PHY from the phylink instance described by @pl.
875 void phylink_disconnect_phy(struct phylink *pl)
877 struct phy_device *phy;
883 mutex_lock(&phy->lock);
884 mutex_lock(&pl->state_mutex);
886 mutex_unlock(&pl->state_mutex);
887 mutex_unlock(&phy->lock);
888 flush_work(&pl->resolve);
893 EXPORT_SYMBOL_GPL(phylink_disconnect_phy);
896 * phylink_fixed_state_cb() - allow setting a fixed link callback
897 * @pl: a pointer to a &struct phylink returned from phylink_create()
898 * @cb: callback to execute to determine the fixed link state.
900 * The MAC driver should call this driver when the state of its link
901 * can be determined through e.g: an out of band MMIO register.
903 int phylink_fixed_state_cb(struct phylink *pl,
904 void (*cb)(struct net_device *dev,
905 struct phylink_link_state *state))
907 /* It does not make sense to let the link be overriden unless we use
910 if (pl->link_an_mode != MLO_AN_FIXED)
913 mutex_lock(&pl->state_mutex);
914 pl->get_fixed_state = cb;
915 mutex_unlock(&pl->state_mutex);
919 EXPORT_SYMBOL_GPL(phylink_fixed_state_cb);
922 * phylink_mac_change() - notify phylink of a change in MAC state
923 * @pl: a pointer to a &struct phylink returned from phylink_create()
924 * @up: indicates whether the link is currently up.
926 * The MAC driver should call this driver when the state of its link
927 * changes (eg, link failure, new negotiation results, etc.)
929 void phylink_mac_change(struct phylink *pl, bool up)
932 pl->mac_link_dropped = true;
933 phylink_run_resolve(pl);
934 phylink_dbg(pl, "mac link %s\n", up ? "up" : "down");
936 EXPORT_SYMBOL_GPL(phylink_mac_change);
938 static irqreturn_t phylink_link_handler(int irq, void *data)
940 struct phylink *pl = data;
942 phylink_run_resolve(pl);
948 * phylink_start() - start a phylink instance
949 * @pl: a pointer to a &struct phylink returned from phylink_create()
951 * Start the phylink instance specified by @pl, configuring the MAC for the
952 * desired link mode(s) and negotiation style. This should be called from the
953 * network device driver's &struct net_device_ops ndo_open() method.
955 void phylink_start(struct phylink *pl)
959 phylink_info(pl, "configuring for %s/%s link mode\n",
960 phylink_an_mode_str(pl->link_an_mode),
961 phy_modes(pl->link_config.interface));
963 /* Always set the carrier off */
965 netif_carrier_off(pl->netdev);
967 /* Apply the link configuration to the MAC when starting. This allows
968 * a fixed-link to start with the correct parameters, and also
969 * ensures that we set the appropriate advertisement for Serdes links.
971 phylink_resolve_flow(pl, &pl->link_config);
972 phylink_mac_config(pl, &pl->link_config);
974 /* Restart autonegotiation if using 802.3z to ensure that the link
975 * parameters are properly negotiated. This is necessary for DSA
976 * switches using 802.3z negotiation to ensure they see our modes.
978 phylink_mac_an_restart(pl);
980 clear_bit(PHYLINK_DISABLE_STOPPED, &pl->phylink_disable_state);
981 phylink_run_resolve(pl);
983 if (pl->link_an_mode == MLO_AN_FIXED && pl->link_gpio) {
984 int irq = gpiod_to_irq(pl->link_gpio);
987 if (!request_irq(irq, phylink_link_handler,
988 IRQF_TRIGGER_RISING |
989 IRQF_TRIGGER_FALLING,
996 mod_timer(&pl->link_poll, jiffies + HZ);
998 if (pl->link_an_mode == MLO_AN_FIXED && pl->get_fixed_state)
999 mod_timer(&pl->link_poll, jiffies + HZ);
1001 phy_start(pl->phydev);
1003 sfp_upstream_start(pl->sfp_bus);
1005 EXPORT_SYMBOL_GPL(phylink_start);
1008 * phylink_stop() - stop a phylink instance
1009 * @pl: a pointer to a &struct phylink returned from phylink_create()
1011 * Stop the phylink instance specified by @pl. This should be called from the
1012 * network device driver's &struct net_device_ops ndo_stop() method. The
1013 * network device's carrier state should not be changed prior to calling this
1016 void phylink_stop(struct phylink *pl)
1021 sfp_upstream_stop(pl->sfp_bus);
1023 phy_stop(pl->phydev);
1024 del_timer_sync(&pl->link_poll);
1026 free_irq(pl->link_irq, pl);
1030 phylink_run_resolve_and_disable(pl, PHYLINK_DISABLE_STOPPED);
1032 EXPORT_SYMBOL_GPL(phylink_stop);
1035 * phylink_ethtool_get_wol() - get the wake on lan parameters for the PHY
1036 * @pl: a pointer to a &struct phylink returned from phylink_create()
1037 * @wol: a pointer to &struct ethtool_wolinfo to hold the read parameters
1039 * Read the wake on lan parameters from the PHY attached to the phylink
1040 * instance specified by @pl. If no PHY is currently attached, report no
1041 * support for wake on lan.
1043 void phylink_ethtool_get_wol(struct phylink *pl, struct ethtool_wolinfo *wol)
1051 phy_ethtool_get_wol(pl->phydev, wol);
1053 EXPORT_SYMBOL_GPL(phylink_ethtool_get_wol);
1056 * phylink_ethtool_set_wol() - set wake on lan parameters
1057 * @pl: a pointer to a &struct phylink returned from phylink_create()
1058 * @wol: a pointer to &struct ethtool_wolinfo for the desired parameters
1060 * Set the wake on lan parameters for the PHY attached to the phylink
1061 * instance specified by @pl. If no PHY is attached, returns %EOPNOTSUPP
1064 * Returns zero on success or negative errno code.
1066 int phylink_ethtool_set_wol(struct phylink *pl, struct ethtool_wolinfo *wol)
1068 int ret = -EOPNOTSUPP;
1073 ret = phy_ethtool_set_wol(pl->phydev, wol);
1077 EXPORT_SYMBOL_GPL(phylink_ethtool_set_wol);
1079 static void phylink_merge_link_mode(unsigned long *dst, const unsigned long *b)
1081 __ETHTOOL_DECLARE_LINK_MODE_MASK(mask);
1083 linkmode_zero(mask);
1084 phylink_set_port_modes(mask);
1086 linkmode_and(dst, dst, mask);
1087 linkmode_or(dst, dst, b);
1090 static void phylink_get_ksettings(const struct phylink_link_state *state,
1091 struct ethtool_link_ksettings *kset)
1093 phylink_merge_link_mode(kset->link_modes.advertising, state->advertising);
1094 linkmode_copy(kset->link_modes.lp_advertising, state->lp_advertising);
1095 kset->base.speed = state->speed;
1096 kset->base.duplex = state->duplex;
1097 kset->base.autoneg = state->an_enabled ? AUTONEG_ENABLE :
1102 * phylink_ethtool_ksettings_get() - get the current link settings
1103 * @pl: a pointer to a &struct phylink returned from phylink_create()
1104 * @kset: a pointer to a &struct ethtool_link_ksettings to hold link settings
1106 * Read the current link settings for the phylink instance specified by @pl.
1107 * This will be the link settings read from the MAC, PHY or fixed link
1108 * settings depending on the current negotiation mode.
1110 int phylink_ethtool_ksettings_get(struct phylink *pl,
1111 struct ethtool_link_ksettings *kset)
1113 struct phylink_link_state link_state;
1118 phy_ethtool_ksettings_get(pl->phydev, kset);
1120 kset->base.port = pl->link_port;
1123 linkmode_copy(kset->link_modes.supported, pl->supported);
1125 switch (pl->link_an_mode) {
1127 /* We are using fixed settings. Report these as the
1128 * current link settings - and note that these also
1129 * represent the supported speeds/duplex/pause modes.
1131 phylink_get_fixed_state(pl, &link_state);
1132 phylink_get_ksettings(&link_state, kset);
1136 /* If there is a phy attached, then use the reported
1137 * settings from the phy with no modification.
1142 phylink_get_mac_state(pl, &link_state);
1144 /* The MAC is reporting the link results from its own PCS
1145 * layer via in-band status. Report these as the current
1148 phylink_get_ksettings(&link_state, kset);
1154 EXPORT_SYMBOL_GPL(phylink_ethtool_ksettings_get);
1157 * phylink_ethtool_ksettings_set() - set the link settings
1158 * @pl: a pointer to a &struct phylink returned from phylink_create()
1159 * @kset: a pointer to a &struct ethtool_link_ksettings for the desired modes
1161 int phylink_ethtool_ksettings_set(struct phylink *pl,
1162 const struct ethtool_link_ksettings *kset)
1164 __ETHTOOL_DECLARE_LINK_MODE_MASK(support);
1165 struct ethtool_link_ksettings our_kset;
1166 struct phylink_link_state config;
1171 if (kset->base.autoneg != AUTONEG_DISABLE &&
1172 kset->base.autoneg != AUTONEG_ENABLE)
1175 linkmode_copy(support, pl->supported);
1176 config = pl->link_config;
1178 /* Mask out unsupported advertisements */
1179 linkmode_and(config.advertising, kset->link_modes.advertising,
1182 /* FIXME: should we reject autoneg if phy/mac does not support it? */
1183 if (kset->base.autoneg == AUTONEG_DISABLE) {
1184 const struct phy_setting *s;
1186 /* Autonegotiation disabled, select a suitable speed and
1189 s = phy_lookup_setting(kset->base.speed, kset->base.duplex,
1194 /* If we have a fixed link (as specified by firmware), refuse
1195 * to change link parameters.
1197 if (pl->link_an_mode == MLO_AN_FIXED &&
1198 (s->speed != pl->link_config.speed ||
1199 s->duplex != pl->link_config.duplex))
1202 config.speed = s->speed;
1203 config.duplex = s->duplex;
1204 config.an_enabled = false;
1206 __clear_bit(ETHTOOL_LINK_MODE_Autoneg_BIT, config.advertising);
1208 /* If we have a fixed link, refuse to enable autonegotiation */
1209 if (pl->link_an_mode == MLO_AN_FIXED)
1212 config.speed = SPEED_UNKNOWN;
1213 config.duplex = DUPLEX_UNKNOWN;
1214 config.an_enabled = true;
1216 __set_bit(ETHTOOL_LINK_MODE_Autoneg_BIT, config.advertising);
1219 if (phylink_validate(pl, support, &config))
1222 /* If autonegotiation is enabled, we must have an advertisement */
1223 if (config.an_enabled && phylink_is_empty_linkmode(config.advertising))
1227 linkmode_copy(our_kset.link_modes.advertising, config.advertising);
1228 our_kset.base.speed = config.speed;
1229 our_kset.base.duplex = config.duplex;
1231 /* If we have a PHY, configure the phy */
1233 ret = phy_ethtool_ksettings_set(pl->phydev, &our_kset);
1238 mutex_lock(&pl->state_mutex);
1239 /* Configure the MAC to match the new settings */
1240 linkmode_copy(pl->link_config.advertising, our_kset.link_modes.advertising);
1241 pl->link_config.interface = config.interface;
1242 pl->link_config.speed = our_kset.base.speed;
1243 pl->link_config.duplex = our_kset.base.duplex;
1244 pl->link_config.an_enabled = our_kset.base.autoneg != AUTONEG_DISABLE;
1246 if (!test_bit(PHYLINK_DISABLE_STOPPED, &pl->phylink_disable_state)) {
1247 phylink_mac_config(pl, &pl->link_config);
1248 phylink_mac_an_restart(pl);
1250 mutex_unlock(&pl->state_mutex);
1254 EXPORT_SYMBOL_GPL(phylink_ethtool_ksettings_set);
1257 * phylink_ethtool_nway_reset() - restart negotiation
1258 * @pl: a pointer to a &struct phylink returned from phylink_create()
1260 * Restart negotiation for the phylink instance specified by @pl. This will
1261 * cause any attached phy to restart negotiation with the link partner, and
1262 * if the MAC is in a BaseX mode, the MAC will also be requested to restart
1265 * Returns zero on success, or negative error code.
1267 int phylink_ethtool_nway_reset(struct phylink *pl)
1274 ret = phy_restart_aneg(pl->phydev);
1275 phylink_mac_an_restart(pl);
1279 EXPORT_SYMBOL_GPL(phylink_ethtool_nway_reset);
1282 * phylink_ethtool_get_pauseparam() - get the current pause parameters
1283 * @pl: a pointer to a &struct phylink returned from phylink_create()
1284 * @pause: a pointer to a &struct ethtool_pauseparam
1286 void phylink_ethtool_get_pauseparam(struct phylink *pl,
1287 struct ethtool_pauseparam *pause)
1291 pause->autoneg = !!(pl->link_config.pause & MLO_PAUSE_AN);
1292 pause->rx_pause = !!(pl->link_config.pause & MLO_PAUSE_RX);
1293 pause->tx_pause = !!(pl->link_config.pause & MLO_PAUSE_TX);
1295 EXPORT_SYMBOL_GPL(phylink_ethtool_get_pauseparam);
1298 * phylink_ethtool_set_pauseparam() - set the current pause parameters
1299 * @pl: a pointer to a &struct phylink returned from phylink_create()
1300 * @pause: a pointer to a &struct ethtool_pauseparam
1302 int phylink_ethtool_set_pauseparam(struct phylink *pl,
1303 struct ethtool_pauseparam *pause)
1305 struct phylink_link_state *config = &pl->link_config;
1309 if (!phylink_test(pl->supported, Pause) &&
1310 !phylink_test(pl->supported, Asym_Pause))
1313 if (!phylink_test(pl->supported, Asym_Pause) &&
1314 !pause->autoneg && pause->rx_pause != pause->tx_pause)
1317 config->pause &= ~(MLO_PAUSE_AN | MLO_PAUSE_TXRX_MASK);
1320 config->pause |= MLO_PAUSE_AN;
1321 if (pause->rx_pause)
1322 config->pause |= MLO_PAUSE_RX;
1323 if (pause->tx_pause)
1324 config->pause |= MLO_PAUSE_TX;
1326 if (!test_bit(PHYLINK_DISABLE_STOPPED, &pl->phylink_disable_state)) {
1327 switch (pl->link_an_mode) {
1329 /* Silently mark the carrier down, and then trigger a resolve */
1331 netif_carrier_off(pl->netdev);
1332 phylink_run_resolve(pl);
1336 /* Should we allow fixed links to change against the config? */
1337 phylink_resolve_flow(pl, config);
1338 phylink_mac_config(pl, config);
1342 phylink_mac_config(pl, config);
1343 phylink_mac_an_restart(pl);
1350 EXPORT_SYMBOL_GPL(phylink_ethtool_set_pauseparam);
1353 * phylink_ethtool_get_eee_err() - read the energy efficient ethernet error
1355 * @pl: a pointer to a &struct phylink returned from phylink_create().
1357 * Read the Energy Efficient Ethernet error counter from the PHY associated
1358 * with the phylink instance specified by @pl.
1360 * Returns positive error counter value, or negative error code.
1362 int phylink_get_eee_err(struct phylink *pl)
1369 ret = phy_get_eee_err(pl->phydev);
1373 EXPORT_SYMBOL_GPL(phylink_get_eee_err);
1376 * phylink_init_eee() - init and check the EEE features
1377 * @pl: a pointer to a &struct phylink returned from phylink_create()
1378 * @clk_stop_enable: allow PHY to stop receive clock
1380 * Must be called either with RTNL held or within mac_link_up()
1382 int phylink_init_eee(struct phylink *pl, bool clk_stop_enable)
1384 int ret = -EOPNOTSUPP;
1387 ret = phy_init_eee(pl->phydev, clk_stop_enable);
1391 EXPORT_SYMBOL_GPL(phylink_init_eee);
1394 * phylink_ethtool_get_eee() - read the energy efficient ethernet parameters
1395 * @pl: a pointer to a &struct phylink returned from phylink_create()
1396 * @eee: a pointer to a &struct ethtool_eee for the read parameters
1398 int phylink_ethtool_get_eee(struct phylink *pl, struct ethtool_eee *eee)
1400 int ret = -EOPNOTSUPP;
1405 ret = phy_ethtool_get_eee(pl->phydev, eee);
1409 EXPORT_SYMBOL_GPL(phylink_ethtool_get_eee);
1412 * phylink_ethtool_set_eee() - set the energy efficient ethernet parameters
1413 * @pl: a pointer to a &struct phylink returned from phylink_create()
1414 * @eee: a pointer to a &struct ethtool_eee for the desired parameters
1416 int phylink_ethtool_set_eee(struct phylink *pl, struct ethtool_eee *eee)
1418 int ret = -EOPNOTSUPP;
1423 ret = phy_ethtool_set_eee(pl->phydev, eee);
1427 EXPORT_SYMBOL_GPL(phylink_ethtool_set_eee);
1429 /* This emulates MII registers for a fixed-mode phy operating as per the
1430 * passed in state. "aneg" defines if we report negotiation is possible.
1432 * FIXME: should deal with negotiation state too.
1434 static int phylink_mii_emul_read(unsigned int reg,
1435 struct phylink_link_state *state)
1437 struct fixed_phy_status fs;
1440 fs.link = state->link;
1441 fs.speed = state->speed;
1442 fs.duplex = state->duplex;
1443 fs.pause = state->pause & MLO_PAUSE_SYM;
1444 fs.asym_pause = state->pause & MLO_PAUSE_ASYM;
1446 val = swphy_read_reg(reg, &fs);
1447 if (reg == MII_BMSR) {
1448 if (!state->an_complete)
1449 val &= ~BMSR_ANEGCOMPLETE;
1454 static int phylink_phy_read(struct phylink *pl, unsigned int phy_id,
1457 struct phy_device *phydev = pl->phydev;
1460 if (mdio_phy_id_is_c45(phy_id)) {
1461 prtad = mdio_phy_id_prtad(phy_id);
1462 devad = mdio_phy_id_devad(phy_id);
1463 devad = MII_ADDR_C45 | devad << 16 | reg;
1464 } else if (phydev->is_c45) {
1470 devad = __ffs(phydev->c45_ids.devices_in_package);
1474 if (!(phydev->c45_ids.devices_in_package & MDIO_DEVS_AN))
1476 devad = MDIO_MMD_AN;
1477 if (reg == MII_ADVERTISE)
1478 reg = MDIO_AN_ADVERTISE;
1486 devad = MII_ADDR_C45 | devad << 16 | reg;
1491 return mdiobus_read(pl->phydev->mdio.bus, prtad, devad);
1494 static int phylink_phy_write(struct phylink *pl, unsigned int phy_id,
1495 unsigned int reg, unsigned int val)
1497 struct phy_device *phydev = pl->phydev;
1500 if (mdio_phy_id_is_c45(phy_id)) {
1501 prtad = mdio_phy_id_prtad(phy_id);
1502 devad = mdio_phy_id_devad(phy_id);
1503 devad = MII_ADDR_C45 | devad << 16 | reg;
1504 } else if (phydev->is_c45) {
1510 devad = __ffs(phydev->c45_ids.devices_in_package);
1514 if (!(phydev->c45_ids.devices_in_package & MDIO_DEVS_AN))
1516 devad = MDIO_MMD_AN;
1517 if (reg == MII_ADVERTISE)
1518 reg = MDIO_AN_ADVERTISE;
1526 devad = MII_ADDR_C45 | devad << 16 | reg;
1532 return mdiobus_write(phydev->mdio.bus, prtad, devad, val);
1535 static int phylink_mii_read(struct phylink *pl, unsigned int phy_id,
1538 struct phylink_link_state state;
1541 switch (pl->link_an_mode) {
1544 phylink_get_fixed_state(pl, &state);
1545 val = phylink_mii_emul_read(reg, &state);
1554 val = phylink_get_mac_state(pl, &state);
1558 val = phylink_mii_emul_read(reg, &state);
1563 return val & 0xffff;
1566 static int phylink_mii_write(struct phylink *pl, unsigned int phy_id,
1567 unsigned int reg, unsigned int val)
1569 switch (pl->link_an_mode) {
1584 * phylink_mii_ioctl() - generic mii ioctl interface
1585 * @pl: a pointer to a &struct phylink returned from phylink_create()
1586 * @ifr: a pointer to a &struct ifreq for socket ioctls
1587 * @cmd: ioctl cmd to execute
1589 * Perform the specified MII ioctl on the PHY attached to the phylink instance
1590 * specified by @pl. If no PHY is attached, emulate the presence of the PHY.
1592 * Returns: zero on success or negative error code.
1595 * read register from the current PHY.
1597 * read register from the specified PHY.
1599 * set a register on the specified PHY.
1601 int phylink_mii_ioctl(struct phylink *pl, struct ifreq *ifr, int cmd)
1603 struct mii_ioctl_data *mii = if_mii(ifr);
1609 /* PHYs only exist for MLO_AN_PHY and SGMII */
1612 mii->phy_id = pl->phydev->mdio.addr;
1616 ret = phylink_phy_read(pl, mii->phy_id, mii->reg_num);
1624 ret = phylink_phy_write(pl, mii->phy_id, mii->reg_num,
1629 ret = phy_mii_ioctl(pl->phydev, ifr, cmd);
1639 ret = phylink_mii_read(pl, mii->phy_id, mii->reg_num);
1647 ret = phylink_mii_write(pl, mii->phy_id, mii->reg_num,
1659 EXPORT_SYMBOL_GPL(phylink_mii_ioctl);
1661 static void phylink_sfp_attach(void *upstream, struct sfp_bus *bus)
1663 struct phylink *pl = upstream;
1665 pl->netdev->sfp_bus = bus;
1668 static void phylink_sfp_detach(void *upstream, struct sfp_bus *bus)
1670 struct phylink *pl = upstream;
1672 pl->netdev->sfp_bus = NULL;
1675 static int phylink_sfp_module_insert(void *upstream,
1676 const struct sfp_eeprom_id *id)
1678 struct phylink *pl = upstream;
1679 __ETHTOOL_DECLARE_LINK_MODE_MASK(support) = { 0, };
1680 __ETHTOOL_DECLARE_LINK_MODE_MASK(support1);
1681 struct phylink_link_state config;
1682 phy_interface_t iface;
1689 sfp_parse_support(pl->sfp_bus, id, support);
1690 port = sfp_parse_port(pl->sfp_bus, id, support);
1692 memset(&config, 0, sizeof(config));
1693 linkmode_copy(config.advertising, support);
1694 config.interface = PHY_INTERFACE_MODE_NA;
1695 config.speed = SPEED_UNKNOWN;
1696 config.duplex = DUPLEX_UNKNOWN;
1697 config.pause = MLO_PAUSE_AN;
1698 config.an_enabled = pl->link_config.an_enabled;
1700 /* Ignore errors if we're expecting a PHY to attach later */
1701 ret = phylink_validate(pl, support, &config);
1703 phylink_err(pl, "validation with support %*pb failed: %d\n",
1704 __ETHTOOL_LINK_MODE_MASK_NBITS, support, ret);
1708 linkmode_copy(support1, support);
1710 iface = sfp_select_interface(pl->sfp_bus, id, config.advertising);
1711 if (iface == PHY_INTERFACE_MODE_NA) {
1713 "selection of interface failed, advertisement %*pb\n",
1714 __ETHTOOL_LINK_MODE_MASK_NBITS, config.advertising);
1718 config.interface = iface;
1719 ret = phylink_validate(pl, support1, &config);
1721 phylink_err(pl, "validation of %s/%s with support %*pb failed: %d\n",
1722 phylink_an_mode_str(MLO_AN_INBAND),
1723 phy_modes(config.interface),
1724 __ETHTOOL_LINK_MODE_MASK_NBITS, support, ret);
1728 phylink_dbg(pl, "requesting link mode %s/%s with support %*pb\n",
1729 phylink_an_mode_str(MLO_AN_INBAND),
1730 phy_modes(config.interface),
1731 __ETHTOOL_LINK_MODE_MASK_NBITS, support);
1733 if (phy_interface_mode_is_8023z(iface) && pl->phydev)
1736 changed = !linkmode_equal(pl->supported, support);
1738 linkmode_copy(pl->supported, support);
1739 linkmode_copy(pl->link_config.advertising, config.advertising);
1742 if (pl->link_an_mode != MLO_AN_INBAND ||
1743 pl->link_config.interface != config.interface) {
1744 pl->link_config.interface = config.interface;
1745 pl->link_an_mode = MLO_AN_INBAND;
1749 phylink_info(pl, "switched to %s/%s link mode\n",
1750 phylink_an_mode_str(MLO_AN_INBAND),
1751 phy_modes(config.interface));
1754 pl->link_port = port;
1756 if (changed && !test_bit(PHYLINK_DISABLE_STOPPED,
1757 &pl->phylink_disable_state))
1758 phylink_mac_config(pl, &pl->link_config);
1763 static void phylink_sfp_link_down(void *upstream)
1765 struct phylink *pl = upstream;
1769 phylink_run_resolve_and_disable(pl, PHYLINK_DISABLE_LINK);
1772 static void phylink_sfp_link_up(void *upstream)
1774 struct phylink *pl = upstream;
1778 clear_bit(PHYLINK_DISABLE_LINK, &pl->phylink_disable_state);
1779 phylink_run_resolve(pl);
1782 static int phylink_sfp_connect_phy(void *upstream, struct phy_device *phy)
1784 struct phylink *pl = upstream;
1786 return __phylink_connect_phy(upstream, phy, pl->link_config.interface);
1789 static void phylink_sfp_disconnect_phy(void *upstream)
1791 phylink_disconnect_phy(upstream);
1794 static const struct sfp_upstream_ops sfp_phylink_ops = {
1795 .attach = phylink_sfp_attach,
1796 .detach = phylink_sfp_detach,
1797 .module_insert = phylink_sfp_module_insert,
1798 .link_up = phylink_sfp_link_up,
1799 .link_down = phylink_sfp_link_down,
1800 .connect_phy = phylink_sfp_connect_phy,
1801 .disconnect_phy = phylink_sfp_disconnect_phy,
1804 /* Helpers for MAC drivers */
1807 * phylink_helper_basex_speed() - 1000BaseX/2500BaseX helper
1808 * @state: a pointer to a &struct phylink_link_state
1810 * Inspect the interface mode, advertising mask or forced speed and
1811 * decide whether to run at 2.5Gbit or 1Gbit appropriately, switching
1812 * the interface mode to suit. @state->interface is appropriately
1813 * updated, and the advertising mask has the "other" baseX_Full flag
1816 void phylink_helper_basex_speed(struct phylink_link_state *state)
1818 if (phy_interface_mode_is_8023z(state->interface)) {
1819 bool want_2500 = state->an_enabled ?
1820 phylink_test(state->advertising, 2500baseX_Full) :
1821 state->speed == SPEED_2500;
1824 phylink_clear(state->advertising, 1000baseX_Full);
1825 state->interface = PHY_INTERFACE_MODE_2500BASEX;
1827 phylink_clear(state->advertising, 2500baseX_Full);
1828 state->interface = PHY_INTERFACE_MODE_1000BASEX;
1832 EXPORT_SYMBOL_GPL(phylink_helper_basex_speed);
1834 MODULE_LICENSE("GPL v2");