2 * Copyright 2016 Broadcom
4 * This program is free software; you can redistribute it and/or modify
5 * it under the terms of the GNU General Public License, version 2, as
6 * published by the Free Software Foundation (the "GPL").
8 * This program is distributed in the hope that it will be useful, but
9 * WITHOUT ANY WARRANTY; without even the implied warranty of
10 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
11 * General Public License version 2 (GPLv2) for more details.
13 * You should have received a copy of the GNU General Public License
14 * version 2 (GPLv2) along with this source code.
17 #include <linux/platform_device.h>
18 #include <linux/device.h>
19 #include <linux/of_mdio.h>
20 #include <linux/module.h>
21 #include <linux/phy.h>
22 #include <linux/mdio-mux.h>
23 #include <linux/delay.h>
25 #define MDIO_PARAM_OFFSET 0x00
26 #define MDIO_PARAM_MIIM_CYCLE 29
27 #define MDIO_PARAM_INTERNAL_SEL 25
28 #define MDIO_PARAM_BUS_ID 22
29 #define MDIO_PARAM_C45_SEL 21
30 #define MDIO_PARAM_PHY_ID 16
31 #define MDIO_PARAM_PHY_DATA 0
33 #define MDIO_READ_OFFSET 0x04
34 #define MDIO_READ_DATA_MASK 0xffff
35 #define MDIO_ADDR_OFFSET 0x08
37 #define MDIO_CTRL_OFFSET 0x0C
38 #define MDIO_CTRL_WRITE_OP 0x1
39 #define MDIO_CTRL_READ_OP 0x2
41 #define MDIO_STAT_OFFSET 0x10
42 #define MDIO_STAT_DONE 1
44 #define BUS_MAX_ADDR 32
45 #define EXT_BUS_START_ADDR 16
47 struct iproc_mdiomux_desc {
51 struct mii_bus *mii_bus;
54 static int iproc_mdio_wait_for_idle(void __iomem *base, bool result)
56 unsigned int timeout = 1000; /* loop for 1s */
60 val = readl(base + MDIO_STAT_OFFSET);
61 if ((val & MDIO_STAT_DONE) == result)
64 usleep_range(1000, 2000);
70 /* start_miim_ops- Program and start MDIO transaction over mdio bus.
72 * @phyid: phyid of the selected bus.
73 * @reg: register offset to be read/written.
74 * @val :0 if read op else value to be written in @reg;
75 * @op: Operation that need to be carried out.
76 * MDIO_CTRL_READ_OP: Read transaction.
77 * MDIO_CTRL_WRITE_OP: Write transaction.
79 * Return value: Successful Read operation returns read reg values and write
80 * operation returns 0. Failure operation returns negative error code.
82 static int start_miim_ops(void __iomem *base,
83 u16 phyid, u32 reg, u16 val, u32 op)
88 writel(0, base + MDIO_CTRL_OFFSET);
89 ret = iproc_mdio_wait_for_idle(base, 0);
93 param = readl(base + MDIO_PARAM_OFFSET);
94 param |= phyid << MDIO_PARAM_PHY_ID;
95 param |= val << MDIO_PARAM_PHY_DATA;
96 if (reg & MII_ADDR_C45)
97 param |= BIT(MDIO_PARAM_C45_SEL);
99 writel(param, base + MDIO_PARAM_OFFSET);
101 writel(reg, base + MDIO_ADDR_OFFSET);
103 writel(op, base + MDIO_CTRL_OFFSET);
105 ret = iproc_mdio_wait_for_idle(base, 1);
109 if (op == MDIO_CTRL_READ_OP)
110 ret = readl(base + MDIO_READ_OFFSET) & MDIO_READ_DATA_MASK;
115 static int iproc_mdiomux_read(struct mii_bus *bus, int phyid, int reg)
117 struct iproc_mdiomux_desc *md = bus->priv;
120 ret = start_miim_ops(md->base, phyid, reg, 0, MDIO_CTRL_READ_OP);
122 dev_err(&bus->dev, "mdiomux read operation failed!!!");
127 static int iproc_mdiomux_write(struct mii_bus *bus,
128 int phyid, int reg, u16 val)
130 struct iproc_mdiomux_desc *md = bus->priv;
133 /* Write val at reg offset */
134 ret = start_miim_ops(md->base, phyid, reg, val, MDIO_CTRL_WRITE_OP);
136 dev_err(&bus->dev, "mdiomux write operation failed!!!");
141 static int mdio_mux_iproc_switch_fn(int current_child, int desired_child,
144 struct iproc_mdiomux_desc *md = data;
148 /* select bus and its properties */
149 bus_dir = (desired_child < EXT_BUS_START_ADDR);
150 bus_id = bus_dir ? desired_child : (desired_child - EXT_BUS_START_ADDR);
152 param = (bus_dir ? 1 : 0) << MDIO_PARAM_INTERNAL_SEL;
153 param |= (bus_id << MDIO_PARAM_BUS_ID);
155 writel(param, md->base + MDIO_PARAM_OFFSET);
159 static int mdio_mux_iproc_probe(struct platform_device *pdev)
161 struct iproc_mdiomux_desc *md;
163 struct resource *res;
166 md = devm_kzalloc(&pdev->dev, sizeof(*md), GFP_KERNEL);
169 md->dev = &pdev->dev;
171 res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
172 md->base = devm_ioremap_resource(&pdev->dev, res);
173 if (IS_ERR(md->base)) {
174 dev_err(&pdev->dev, "failed to ioremap register\n");
175 return PTR_ERR(md->base);
178 md->mii_bus = mdiobus_alloc();
180 dev_err(&pdev->dev, "mdiomux bus alloc failed\n");
186 bus->name = "iProc MDIO mux bus";
187 snprintf(bus->id, MII_BUS_ID_SIZE, "%s-%d", pdev->name, pdev->id);
188 bus->parent = &pdev->dev;
189 bus->read = iproc_mdiomux_read;
190 bus->write = iproc_mdiomux_write;
193 bus->dev.of_node = pdev->dev.of_node;
194 rc = mdiobus_register(bus);
196 dev_err(&pdev->dev, "mdiomux registration failed\n");
200 platform_set_drvdata(pdev, md);
202 rc = mdio_mux_init(md->dev, md->dev->of_node, mdio_mux_iproc_switch_fn,
203 &md->mux_handle, md, md->mii_bus);
205 dev_info(md->dev, "mdiomux initialization failed\n");
209 dev_info(md->dev, "iProc mdiomux registered\n");
213 mdiobus_unregister(bus);
219 static int mdio_mux_iproc_remove(struct platform_device *pdev)
221 struct iproc_mdiomux_desc *md = dev_get_platdata(&pdev->dev);
223 mdio_mux_uninit(md->mux_handle);
224 mdiobus_unregister(md->mii_bus);
225 mdiobus_free(md->mii_bus);
230 static const struct of_device_id mdio_mux_iproc_match[] = {
232 .compatible = "brcm,mdio-mux-iproc",
236 MODULE_DEVICE_TABLE(of, mdio_mux_iproc_match);
238 static struct platform_driver mdiomux_iproc_driver = {
240 .name = "mdio-mux-iproc",
241 .of_match_table = mdio_mux_iproc_match,
243 .probe = mdio_mux_iproc_probe,
244 .remove = mdio_mux_iproc_remove,
247 module_platform_driver(mdiomux_iproc_driver);
249 MODULE_DESCRIPTION("iProc MDIO Mux Bus Driver");
250 MODULE_AUTHOR("Pramod Kumar <pramod.kumar@broadcom.com>");
251 MODULE_LICENSE("GPL v2");