drivers/net/phy/dp83848.c

   1 // SPDX-License-Identifier: GPL-2.0
   2 /*
   3  * Driver for the Texas Instruments DP83848 PHY
   4  *
   5  * Copyright (C) 2015-2016 Texas Instruments Incorporated - http://www.ti.com/
   6  */
   7
   8 #include <linux/module.h>
   9 #include <linux/phy.h>
  10
  11 #define TI_DP83848C_PHY_ID              0x20005ca0
  12 #define TI_DP83620_PHY_ID               0x20005ce0
  13 #define NS_DP83848C_PHY_ID              0x20005c90
  14 #define TLK10X_PHY_ID                   0x2000a210
  15
  16 /* Registers */
  17 #define DP83848_MICR                    0x11 /* MII Interrupt Control Register */
  18 #define DP83848_MISR                    0x12 /* MII Interrupt Status Register */
  19
  20 /* MICR Register Fields */
  21 #define DP83848_MICR_INT_OE             BIT(0) /* Interrupt Output Enable */
  22 #define DP83848_MICR_INTEN              BIT(1) /* Interrupt Enable */
  23
  24 /* MISR Register Fields */
  25 #define DP83848_MISR_RHF_INT_EN         BIT(0) /* Receive Error Counter */
  26 #define DP83848_MISR_FHF_INT_EN         BIT(1) /* False Carrier Counter */
  27 #define DP83848_MISR_ANC_INT_EN         BIT(2) /* Auto-negotiation complete */
  28 #define DP83848_MISR_DUP_INT_EN         BIT(3) /* Duplex Status */
  29 #define DP83848_MISR_SPD_INT_EN         BIT(4) /* Speed status */
  30 #define DP83848_MISR_LINK_INT_EN        BIT(5) /* Link status */
  31 #define DP83848_MISR_ED_INT_EN          BIT(6) /* Energy detect */
  32 #define DP83848_MISR_LQM_INT_EN         BIT(7) /* Link Quality Monitor */
  33
  34 #define DP83848_INT_EN_MASK             \
  35         (DP83848_MISR_ANC_INT_EN |      \
  36          DP83848_MISR_DUP_INT_EN |      \
  37          DP83848_MISR_SPD_INT_EN |      \
  38          DP83848_MISR_LINK_INT_EN)
  39
  40 #define DP83848_MISR_RHF_INT            BIT(8)
  41 #define DP83848_MISR_FHF_INT            BIT(9)
  42 #define DP83848_MISR_ANC_INT            BIT(10)
  43 #define DP83848_MISR_DUP_INT            BIT(11)
  44 #define DP83848_MISR_SPD_INT            BIT(12)
  45 #define DP83848_MISR_LINK_INT           BIT(13)
  46 #define DP83848_MISR_ED_INT             BIT(14)
  47
  48 #define DP83848_INT_MASK                \
  49         (DP83848_MISR_ANC_INT | \
  50          DP83848_MISR_DUP_INT | \
  51          DP83848_MISR_SPD_INT | \
  52          DP83848_MISR_LINK_INT)
  53
  54 static int dp83848_ack_interrupt(struct phy_device *phydev)
  55 {
  56         int err = phy_read(phydev, DP83848_MISR);
  57
  58         return err < 0 ? err : 0;
  59 }
  60
  61 static int dp83848_config_intr(struct phy_device *phydev)
  62 {
  63         int control, ret;
  64
  65         control = phy_read(phydev, DP83848_MICR);
  66         if (control < 0)
  67                 return control;
  68
  69         if (phydev->interrupts == PHY_INTERRUPT_ENABLED) {
  70                 ret = dp83848_ack_interrupt(phydev);
  71                 if (ret)
  72                         return ret;
  73
  74                 control |= DP83848_MICR_INT_OE;
  75                 control |= DP83848_MICR_INTEN;
  76
  77                 ret = phy_write(phydev, DP83848_MISR, DP83848_INT_EN_MASK);
  78                 if (ret < 0)
  79                         return ret;
  80
  81                 ret = phy_write(phydev, DP83848_MICR, control);
  82         } else {
  83                 control &= ~DP83848_MICR_INTEN;
  84                 ret = phy_write(phydev, DP83848_MICR, control);
  85                 if (ret)
  86                         return ret;
  87
  88                 ret = dp83848_ack_interrupt(phydev);
  89         }
  90
  91         return ret;
  92 }
  93
  94 static irqreturn_t dp83848_handle_interrupt(struct phy_device *phydev)
  95 {
  96         int irq_status;
  97
  98         irq_status = phy_read(phydev, DP83848_MISR);
  99         if (irq_status < 0) {
 100                 phy_error(phydev);
 101                 return IRQ_NONE;
 102         }
 103
 104         if (!(irq_status & DP83848_INT_MASK))
 105                 return IRQ_NONE;
 106
 107         phy_trigger_machine(phydev);
 108
 109         return IRQ_HANDLED;
 110 }
 111
 112 static int dp83848_config_init(struct phy_device *phydev)
 113 {
 114         int val;
 115
 116         /* DP83620 always reports Auto Negotiation Ability on BMSR. Instead,
 117          * we check initial value of BMCR Auto negotiation enable bit
 118          */
 119         val = phy_read(phydev, MII_BMCR);
 120         if (!(val & BMCR_ANENABLE))
 121                 phydev->autoneg = AUTONEG_DISABLE;
 122
 123         return 0;
 124 }
 125
 126 static struct mdio_device_id __maybe_unused dp83848_tbl[] = {
 127         { TI_DP83848C_PHY_ID, 0xfffffff0 },
 128         { NS_DP83848C_PHY_ID, 0xfffffff0 },
 129         { TI_DP83620_PHY_ID, 0xfffffff0 },
 130         { TLK10X_PHY_ID, 0xfffffff0 },
 131         { }
 132 };
 133 MODULE_DEVICE_TABLE(mdio, dp83848_tbl);
 134
 135 #define DP83848_PHY_DRIVER(_id, _name, _config_init)            \
 136         {                                                       \
 137                 .phy_id         = _id,                          \
 138                 .phy_id_mask    = 0xfffffff0,                   \
 139                 .name           = _name,                        \
 140                 /* PHY_BASIC_FEATURES */                        \
 141                                                                 \
 142                 .soft_reset     = genphy_soft_reset,            \
 143                 .config_init    = _config_init,                 \
 144                 .suspend        = genphy_suspend,               \
 145                 .resume         = genphy_resume,                \
 146                                                                 \
 147                 /* IRQ related */                               \
 148                 .config_intr    = dp83848_config_intr,          \
 149                 .handle_interrupt = dp83848_handle_interrupt,   \
 150         }
 151
 152 static struct phy_driver dp83848_driver[] = {
 153         DP83848_PHY_DRIVER(TI_DP83848C_PHY_ID, "TI DP83848C 10/100 Mbps PHY",
 154                            NULL),
 155         DP83848_PHY_DRIVER(NS_DP83848C_PHY_ID, "NS DP83848C 10/100 Mbps PHY",
 156                            NULL),
 157         DP83848_PHY_DRIVER(TI_DP83620_PHY_ID, "TI DP83620 10/100 Mbps PHY",
 158                            dp83848_config_init),
 159         DP83848_PHY_DRIVER(TLK10X_PHY_ID, "TI TLK10X 10/100 Mbps PHY",
 160                            NULL),
 161 };
 162 module_phy_driver(dp83848_driver);
 163
 164 MODULE_DESCRIPTION("Texas Instruments DP83848 PHY driver");
 165 MODULE_AUTHOR("Andrew F. Davis <afd@ti.com>");
 166 MODULE_LICENSE("GPL v2");