Merge tag 'arm-soc/for-5.12/drivers-part2' of https://github.com/Broadcom/stblinux...
[linux-2.6-microblaze.git] / drivers / net / ethernet / toshiba / ps3_gelic_net.c
1 // SPDX-License-Identifier: GPL-2.0-or-later
2 /*
3  *  PS3 gelic network driver.
4  *
5  * Copyright (C) 2007 Sony Computer Entertainment Inc.
6  * Copyright 2006, 2007 Sony Corporation
7  *
8  * This file is based on: spider_net.c
9  *
10  * (C) Copyright IBM Corp. 2005
11  *
12  * Authors : Utz Bacher <utz.bacher@de.ibm.com>
13  *           Jens Osterkamp <Jens.Osterkamp@de.ibm.com>
14  */
15
16 #undef DEBUG
17
18 #include <linux/interrupt.h>
19 #include <linux/kernel.h>
20 #include <linux/module.h>
21 #include <linux/slab.h>
22
23 #include <linux/etherdevice.h>
24 #include <linux/ethtool.h>
25 #include <linux/if_vlan.h>
26
27 #include <linux/in.h>
28 #include <linux/ip.h>
29 #include <linux/tcp.h>
30
31 #include <linux/dma-mapping.h>
32 #include <net/checksum.h>
33 #include <asm/firmware.h>
34 #include <asm/ps3.h>
35 #include <asm/lv1call.h>
36
37 #include "ps3_gelic_net.h"
38 #include "ps3_gelic_wireless.h"
39
40 #define DRV_NAME "Gelic Network Driver"
41 #define DRV_VERSION "2.0"
42
43 MODULE_AUTHOR("SCE Inc.");
44 MODULE_DESCRIPTION("Gelic Network driver");
45 MODULE_LICENSE("GPL");
46
47
48 /* set irq_mask */
49 int gelic_card_set_irq_mask(struct gelic_card *card, u64 mask)
50 {
51         int status;
52
53         status = lv1_net_set_interrupt_mask(bus_id(card), dev_id(card),
54                                             mask, 0);
55         if (status)
56                 dev_info(ctodev(card),
57                          "%s failed %d\n", __func__, status);
58         return status;
59 }
60
61 static void gelic_card_rx_irq_on(struct gelic_card *card)
62 {
63         card->irq_mask |= GELIC_CARD_RXINT;
64         gelic_card_set_irq_mask(card, card->irq_mask);
65 }
66 static void gelic_card_rx_irq_off(struct gelic_card *card)
67 {
68         card->irq_mask &= ~GELIC_CARD_RXINT;
69         gelic_card_set_irq_mask(card, card->irq_mask);
70 }
71
72 static void gelic_card_get_ether_port_status(struct gelic_card *card,
73                                              int inform)
74 {
75         u64 v2;
76         struct net_device *ether_netdev;
77
78         lv1_net_control(bus_id(card), dev_id(card),
79                         GELIC_LV1_GET_ETH_PORT_STATUS,
80                         GELIC_LV1_VLAN_TX_ETHERNET_0, 0, 0,
81                         &card->ether_port_status, &v2);
82
83         if (inform) {
84                 ether_netdev = card->netdev[GELIC_PORT_ETHERNET_0];
85                 if (card->ether_port_status & GELIC_LV1_ETHER_LINK_UP)
86                         netif_carrier_on(ether_netdev);
87                 else
88                         netif_carrier_off(ether_netdev);
89         }
90 }
91
92 /**
93  * gelic_descr_get_status -- returns the status of a descriptor
94  * @descr: descriptor to look at
95  *
96  * returns the status as in the dmac_cmd_status field of the descriptor
97  */
98 static enum gelic_descr_dma_status
99 gelic_descr_get_status(struct gelic_descr *descr)
100 {
101         return be32_to_cpu(descr->dmac_cmd_status) & GELIC_DESCR_DMA_STAT_MASK;
102 }
103
104 static int gelic_card_set_link_mode(struct gelic_card *card, int mode)
105 {
106         int status;
107         u64 v1, v2;
108
109         status = lv1_net_control(bus_id(card), dev_id(card),
110                                  GELIC_LV1_SET_NEGOTIATION_MODE,
111                                  GELIC_LV1_PHY_ETHERNET_0, mode, 0, &v1, &v2);
112         if (status) {
113                 pr_info("%s: failed setting negotiation mode %d\n", __func__,
114                         status);
115                 return -EBUSY;
116         }
117
118         card->link_mode = mode;
119         return 0;
120 }
121
122 /**
123  * gelic_card_disable_txdmac - disables the transmit DMA controller
124  * @card: card structure
125  *
126  * gelic_card_disable_txdmac terminates processing on the DMA controller by
127  * turing off DMA and issuing a force end
128  */
129 static void gelic_card_disable_txdmac(struct gelic_card *card)
130 {
131         int status;
132
133         /* this hvc blocks until the DMA in progress really stopped */
134         status = lv1_net_stop_tx_dma(bus_id(card), dev_id(card));
135         if (status)
136                 dev_err(ctodev(card),
137                         "lv1_net_stop_tx_dma failed, status=%d\n", status);
138 }
139
140 /**
141  * gelic_card_enable_rxdmac - enables the receive DMA controller
142  * @card: card structure
143  *
144  * gelic_card_enable_rxdmac enables the DMA controller by setting RX_DMA_EN
145  * in the GDADMACCNTR register
146  */
147 static void gelic_card_enable_rxdmac(struct gelic_card *card)
148 {
149         int status;
150
151 #ifdef DEBUG
152         if (gelic_descr_get_status(card->rx_chain.head) !=
153             GELIC_DESCR_DMA_CARDOWNED) {
154                 printk(KERN_ERR "%s: status=%x\n", __func__,
155                        be32_to_cpu(card->rx_chain.head->dmac_cmd_status));
156                 printk(KERN_ERR "%s: nextphy=%x\n", __func__,
157                        be32_to_cpu(card->rx_chain.head->next_descr_addr));
158                 printk(KERN_ERR "%s: head=%p\n", __func__,
159                        card->rx_chain.head);
160         }
161 #endif
162         status = lv1_net_start_rx_dma(bus_id(card), dev_id(card),
163                                 card->rx_chain.head->bus_addr, 0);
164         if (status)
165                 dev_info(ctodev(card),
166                          "lv1_net_start_rx_dma failed, status=%d\n", status);
167 }
168
169 /**
170  * gelic_card_disable_rxdmac - disables the receive DMA controller
171  * @card: card structure
172  *
173  * gelic_card_disable_rxdmac terminates processing on the DMA controller by
174  * turing off DMA and issuing a force end
175  */
176 static void gelic_card_disable_rxdmac(struct gelic_card *card)
177 {
178         int status;
179
180         /* this hvc blocks until the DMA in progress really stopped */
181         status = lv1_net_stop_rx_dma(bus_id(card), dev_id(card));
182         if (status)
183                 dev_err(ctodev(card),
184                         "lv1_net_stop_rx_dma failed, %d\n", status);
185 }
186
187 /**
188  * gelic_descr_set_status -- sets the status of a descriptor
189  * @descr: descriptor to change
190  * @status: status to set in the descriptor
191  *
192  * changes the status to the specified value. Doesn't change other bits
193  * in the status
194  */
195 static void gelic_descr_set_status(struct gelic_descr *descr,
196                                    enum gelic_descr_dma_status status)
197 {
198         descr->dmac_cmd_status = cpu_to_be32(status |
199                         (be32_to_cpu(descr->dmac_cmd_status) &
200                          ~GELIC_DESCR_DMA_STAT_MASK));
201         /*
202          * dma_cmd_status field is used to indicate whether the descriptor
203          * is valid or not.
204          * Usually caller of this function wants to inform that to the
205          * hardware, so we assure here the hardware sees the change.
206          */
207         wmb();
208 }
209
210 /**
211  * gelic_card_reset_chain - reset status of a descriptor chain
212  * @card: card structure
213  * @chain: address of chain
214  * @start_descr: address of descriptor array
215  *
216  * Reset the status of dma descriptors to ready state
217  * and re-initialize the hardware chain for later use
218  */
219 static void gelic_card_reset_chain(struct gelic_card *card,
220                                    struct gelic_descr_chain *chain,
221                                    struct gelic_descr *start_descr)
222 {
223         struct gelic_descr *descr;
224
225         for (descr = start_descr; start_descr != descr->next; descr++) {
226                 gelic_descr_set_status(descr, GELIC_DESCR_DMA_CARDOWNED);
227                 descr->next_descr_addr = cpu_to_be32(descr->next->bus_addr);
228         }
229
230         chain->head = start_descr;
231         chain->tail = (descr - 1);
232
233         (descr - 1)->next_descr_addr = 0;
234 }
235
236 void gelic_card_up(struct gelic_card *card)
237 {
238         pr_debug("%s: called\n", __func__);
239         mutex_lock(&card->updown_lock);
240         if (atomic_inc_return(&card->users) == 1) {
241                 pr_debug("%s: real do\n", __func__);
242                 /* enable irq */
243                 gelic_card_set_irq_mask(card, card->irq_mask);
244                 /* start rx */
245                 gelic_card_enable_rxdmac(card);
246
247                 napi_enable(&card->napi);
248         }
249         mutex_unlock(&card->updown_lock);
250         pr_debug("%s: done\n", __func__);
251 }
252
253 void gelic_card_down(struct gelic_card *card)
254 {
255         u64 mask;
256         pr_debug("%s: called\n", __func__);
257         mutex_lock(&card->updown_lock);
258         if (atomic_dec_if_positive(&card->users) == 0) {
259                 pr_debug("%s: real do\n", __func__);
260                 napi_disable(&card->napi);
261                 /*
262                  * Disable irq. Wireless interrupts will
263                  * be disabled later if any
264                  */
265                 mask = card->irq_mask & (GELIC_CARD_WLAN_EVENT_RECEIVED |
266                                          GELIC_CARD_WLAN_COMMAND_COMPLETED);
267                 gelic_card_set_irq_mask(card, mask);
268                 /* stop rx */
269                 gelic_card_disable_rxdmac(card);
270                 gelic_card_reset_chain(card, &card->rx_chain,
271                                        card->descr + GELIC_NET_TX_DESCRIPTORS);
272                 /* stop tx */
273                 gelic_card_disable_txdmac(card);
274         }
275         mutex_unlock(&card->updown_lock);
276         pr_debug("%s: done\n", __func__);
277 }
278
279 /**
280  * gelic_card_free_chain - free descriptor chain
281  * @card: card structure
282  * @descr_in: address of desc
283  */
284 static void gelic_card_free_chain(struct gelic_card *card,
285                                   struct gelic_descr *descr_in)
286 {
287         struct gelic_descr *descr;
288
289         for (descr = descr_in; descr && descr->bus_addr; descr = descr->next) {
290                 dma_unmap_single(ctodev(card), descr->bus_addr,
291                                  GELIC_DESCR_SIZE, DMA_BIDIRECTIONAL);
292                 descr->bus_addr = 0;
293         }
294 }
295
296 /**
297  * gelic_card_init_chain - links descriptor chain
298  * @card: card structure
299  * @chain: address of chain
300  * @start_descr: address of descriptor array
301  * @no: number of descriptors
302  *
303  * we manage a circular list that mirrors the hardware structure,
304  * except that the hardware uses bus addresses.
305  *
306  * returns 0 on success, <0 on failure
307  */
308 static int gelic_card_init_chain(struct gelic_card *card,
309                                  struct gelic_descr_chain *chain,
310                                  struct gelic_descr *start_descr, int no)
311 {
312         int i;
313         struct gelic_descr *descr;
314
315         descr = start_descr;
316         memset(descr, 0, sizeof(*descr) * no);
317
318         /* set up the hardware pointers in each descriptor */
319         for (i = 0; i < no; i++, descr++) {
320                 gelic_descr_set_status(descr, GELIC_DESCR_DMA_NOT_IN_USE);
321                 descr->bus_addr =
322                         dma_map_single(ctodev(card), descr,
323                                        GELIC_DESCR_SIZE,
324                                        DMA_BIDIRECTIONAL);
325
326                 if (!descr->bus_addr)
327                         goto iommu_error;
328
329                 descr->next = descr + 1;
330                 descr->prev = descr - 1;
331         }
332         /* make them as ring */
333         (descr - 1)->next = start_descr;
334         start_descr->prev = (descr - 1);
335
336         /* chain bus addr of hw descriptor */
337         descr = start_descr;
338         for (i = 0; i < no; i++, descr++) {
339                 descr->next_descr_addr = cpu_to_be32(descr->next->bus_addr);
340         }
341
342         chain->head = start_descr;
343         chain->tail = start_descr;
344
345         /* do not chain last hw descriptor */
346         (descr - 1)->next_descr_addr = 0;
347
348         return 0;
349
350 iommu_error:
351         for (i--, descr--; 0 <= i; i--, descr--)
352                 if (descr->bus_addr)
353                         dma_unmap_single(ctodev(card), descr->bus_addr,
354                                          GELIC_DESCR_SIZE,
355                                          DMA_BIDIRECTIONAL);
356         return -ENOMEM;
357 }
358
359 /**
360  * gelic_descr_prepare_rx - reinitializes a rx descriptor
361  * @card: card structure
362  * @descr: descriptor to re-init
363  *
364  * return 0 on success, <0 on failure
365  *
366  * allocates a new rx skb, iommu-maps it and attaches it to the descriptor.
367  * Activate the descriptor state-wise
368  */
369 static int gelic_descr_prepare_rx(struct gelic_card *card,
370                                   struct gelic_descr *descr)
371 {
372         int offset;
373         unsigned int bufsize;
374
375         if (gelic_descr_get_status(descr) !=  GELIC_DESCR_DMA_NOT_IN_USE)
376                 dev_info(ctodev(card), "%s: ERROR status\n", __func__);
377         /* we need to round up the buffer size to a multiple of 128 */
378         bufsize = ALIGN(GELIC_NET_MAX_MTU, GELIC_NET_RXBUF_ALIGN);
379
380         /* and we need to have it 128 byte aligned, therefore we allocate a
381          * bit more */
382         descr->skb = dev_alloc_skb(bufsize + GELIC_NET_RXBUF_ALIGN - 1);
383         if (!descr->skb) {
384                 descr->buf_addr = 0; /* tell DMAC don't touch memory */
385                 return -ENOMEM;
386         }
387         descr->buf_size = cpu_to_be32(bufsize);
388         descr->dmac_cmd_status = 0;
389         descr->result_size = 0;
390         descr->valid_size = 0;
391         descr->data_error = 0;
392
393         offset = ((unsigned long)descr->skb->data) &
394                 (GELIC_NET_RXBUF_ALIGN - 1);
395         if (offset)
396                 skb_reserve(descr->skb, GELIC_NET_RXBUF_ALIGN - offset);
397         /* io-mmu-map the skb */
398         descr->buf_addr = cpu_to_be32(dma_map_single(ctodev(card),
399                                                      descr->skb->data,
400                                                      GELIC_NET_MAX_MTU,
401                                                      DMA_FROM_DEVICE));
402         if (!descr->buf_addr) {
403                 dev_kfree_skb_any(descr->skb);
404                 descr->skb = NULL;
405                 dev_info(ctodev(card),
406                          "%s:Could not iommu-map rx buffer\n", __func__);
407                 gelic_descr_set_status(descr, GELIC_DESCR_DMA_NOT_IN_USE);
408                 return -ENOMEM;
409         } else {
410                 gelic_descr_set_status(descr, GELIC_DESCR_DMA_CARDOWNED);
411                 return 0;
412         }
413 }
414
415 /**
416  * gelic_card_release_rx_chain - free all skb of rx descr
417  * @card: card structure
418  *
419  */
420 static void gelic_card_release_rx_chain(struct gelic_card *card)
421 {
422         struct gelic_descr *descr = card->rx_chain.head;
423
424         do {
425                 if (descr->skb) {
426                         dma_unmap_single(ctodev(card),
427                                          be32_to_cpu(descr->buf_addr),
428                                          descr->skb->len,
429                                          DMA_FROM_DEVICE);
430                         descr->buf_addr = 0;
431                         dev_kfree_skb_any(descr->skb);
432                         descr->skb = NULL;
433                         gelic_descr_set_status(descr,
434                                                GELIC_DESCR_DMA_NOT_IN_USE);
435                 }
436                 descr = descr->next;
437         } while (descr != card->rx_chain.head);
438 }
439
440 /**
441  * gelic_card_fill_rx_chain - fills descriptors/skbs in the rx chains
442  * @card: card structure
443  *
444  * fills all descriptors in the rx chain: allocates skbs
445  * and iommu-maps them.
446  * returns 0 on success, < 0 on failure
447  */
448 static int gelic_card_fill_rx_chain(struct gelic_card *card)
449 {
450         struct gelic_descr *descr = card->rx_chain.head;
451         int ret;
452
453         do {
454                 if (!descr->skb) {
455                         ret = gelic_descr_prepare_rx(card, descr);
456                         if (ret)
457                                 goto rewind;
458                 }
459                 descr = descr->next;
460         } while (descr != card->rx_chain.head);
461
462         return 0;
463 rewind:
464         gelic_card_release_rx_chain(card);
465         return ret;
466 }
467
468 /**
469  * gelic_card_alloc_rx_skbs - allocates rx skbs in rx descriptor chains
470  * @card: card structure
471  *
472  * returns 0 on success, < 0 on failure
473  */
474 static int gelic_card_alloc_rx_skbs(struct gelic_card *card)
475 {
476         struct gelic_descr_chain *chain;
477         int ret;
478         chain = &card->rx_chain;
479         ret = gelic_card_fill_rx_chain(card);
480         chain->tail = card->rx_top->prev; /* point to the last */
481         return ret;
482 }
483
484 /**
485  * gelic_descr_release_tx - processes a used tx descriptor
486  * @card: card structure
487  * @descr: descriptor to release
488  *
489  * releases a used tx descriptor (unmapping, freeing of skb)
490  */
491 static void gelic_descr_release_tx(struct gelic_card *card,
492                                        struct gelic_descr *descr)
493 {
494         struct sk_buff *skb = descr->skb;
495
496         BUG_ON(!(be32_to_cpu(descr->data_status) & GELIC_DESCR_TX_TAIL));
497
498         dma_unmap_single(ctodev(card), be32_to_cpu(descr->buf_addr), skb->len,
499                          DMA_TO_DEVICE);
500         dev_kfree_skb_any(skb);
501
502         descr->buf_addr = 0;
503         descr->buf_size = 0;
504         descr->next_descr_addr = 0;
505         descr->result_size = 0;
506         descr->valid_size = 0;
507         descr->data_status = 0;
508         descr->data_error = 0;
509         descr->skb = NULL;
510
511         /* set descr status */
512         gelic_descr_set_status(descr, GELIC_DESCR_DMA_NOT_IN_USE);
513 }
514
515 static void gelic_card_stop_queues(struct gelic_card *card)
516 {
517         netif_stop_queue(card->netdev[GELIC_PORT_ETHERNET_0]);
518
519         if (card->netdev[GELIC_PORT_WIRELESS])
520                 netif_stop_queue(card->netdev[GELIC_PORT_WIRELESS]);
521 }
522 static void gelic_card_wake_queues(struct gelic_card *card)
523 {
524         netif_wake_queue(card->netdev[GELIC_PORT_ETHERNET_0]);
525
526         if (card->netdev[GELIC_PORT_WIRELESS])
527                 netif_wake_queue(card->netdev[GELIC_PORT_WIRELESS]);
528 }
529 /**
530  * gelic_card_release_tx_chain - processes sent tx descriptors
531  * @card: adapter structure
532  * @stop: net_stop sequence
533  *
534  * releases the tx descriptors that gelic has finished with
535  */
536 static void gelic_card_release_tx_chain(struct gelic_card *card, int stop)
537 {
538         struct gelic_descr_chain *tx_chain;
539         enum gelic_descr_dma_status status;
540         struct net_device *netdev;
541         int release = 0;
542
543         for (tx_chain = &card->tx_chain;
544              tx_chain->head != tx_chain->tail && tx_chain->tail;
545              tx_chain->tail = tx_chain->tail->next) {
546                 status = gelic_descr_get_status(tx_chain->tail);
547                 netdev = tx_chain->tail->skb->dev;
548                 switch (status) {
549                 case GELIC_DESCR_DMA_RESPONSE_ERROR:
550                 case GELIC_DESCR_DMA_PROTECTION_ERROR:
551                 case GELIC_DESCR_DMA_FORCE_END:
552                         if (printk_ratelimit())
553                                 dev_info(ctodev(card),
554                                          "%s: forcing end of tx descriptor " \
555                                          "with status %x\n",
556                                          __func__, status);
557                         netdev->stats.tx_dropped++;
558                         break;
559
560                 case GELIC_DESCR_DMA_COMPLETE:
561                         if (tx_chain->tail->skb) {
562                                 netdev->stats.tx_packets++;
563                                 netdev->stats.tx_bytes +=
564                                         tx_chain->tail->skb->len;
565                         }
566                         break;
567
568                 case GELIC_DESCR_DMA_CARDOWNED:
569                         /* pending tx request */
570                 default:
571                         /* any other value (== GELIC_DESCR_DMA_NOT_IN_USE) */
572                         if (!stop)
573                                 goto out;
574                 }
575                 gelic_descr_release_tx(card, tx_chain->tail);
576                 release ++;
577         }
578 out:
579         if (!stop && release)
580                 gelic_card_wake_queues(card);
581 }
582
583 /**
584  * gelic_net_set_multi - sets multicast addresses and promisc flags
585  * @netdev: interface device structure
586  *
587  * gelic_net_set_multi configures multicast addresses as needed for the
588  * netdev interface. It also sets up multicast, allmulti and promisc
589  * flags appropriately
590  */
591 void gelic_net_set_multi(struct net_device *netdev)
592 {
593         struct gelic_card *card = netdev_card(netdev);
594         struct netdev_hw_addr *ha;
595         unsigned int i;
596         uint8_t *p;
597         u64 addr;
598         int status;
599
600         /* clear all multicast address */
601         status = lv1_net_remove_multicast_address(bus_id(card), dev_id(card),
602                                                   0, 1);
603         if (status)
604                 dev_err(ctodev(card),
605                         "lv1_net_remove_multicast_address failed %d\n",
606                         status);
607         /* set broadcast address */
608         status = lv1_net_add_multicast_address(bus_id(card), dev_id(card),
609                                                GELIC_NET_BROADCAST_ADDR, 0);
610         if (status)
611                 dev_err(ctodev(card),
612                         "lv1_net_add_multicast_address failed, %d\n",
613                         status);
614
615         if ((netdev->flags & IFF_ALLMULTI) ||
616             (netdev_mc_count(netdev) > GELIC_NET_MC_COUNT_MAX)) {
617                 status = lv1_net_add_multicast_address(bus_id(card),
618                                                        dev_id(card),
619                                                        0, 1);
620                 if (status)
621                         dev_err(ctodev(card),
622                                 "lv1_net_add_multicast_address failed, %d\n",
623                                 status);
624                 return;
625         }
626
627         /* set multicast addresses */
628         netdev_for_each_mc_addr(ha, netdev) {
629                 addr = 0;
630                 p = ha->addr;
631                 for (i = 0; i < ETH_ALEN; i++) {
632                         addr <<= 8;
633                         addr |= *p++;
634                 }
635                 status = lv1_net_add_multicast_address(bus_id(card),
636                                                        dev_id(card),
637                                                        addr, 0);
638                 if (status)
639                         dev_err(ctodev(card),
640                                 "lv1_net_add_multicast_address failed, %d\n",
641                                 status);
642         }
643 }
644
645 /**
646  * gelic_net_stop - called upon ifconfig down
647  * @netdev: interface device structure
648  *
649  * always returns 0
650  */
651 int gelic_net_stop(struct net_device *netdev)
652 {
653         struct gelic_card *card;
654
655         pr_debug("%s: start\n", __func__);
656
657         netif_stop_queue(netdev);
658         netif_carrier_off(netdev);
659
660         card = netdev_card(netdev);
661         gelic_card_down(card);
662
663         pr_debug("%s: done\n", __func__);
664         return 0;
665 }
666
667 /**
668  * gelic_card_get_next_tx_descr - returns the next available tx descriptor
669  * @card: device structure to get descriptor from
670  *
671  * returns the address of the next descriptor, or NULL if not available.
672  */
673 static struct gelic_descr *
674 gelic_card_get_next_tx_descr(struct gelic_card *card)
675 {
676         if (!card->tx_chain.head)
677                 return NULL;
678         /*  see if the next descriptor is free */
679         if (card->tx_chain.tail != card->tx_chain.head->next &&
680             gelic_descr_get_status(card->tx_chain.head) ==
681             GELIC_DESCR_DMA_NOT_IN_USE)
682                 return card->tx_chain.head;
683         else
684                 return NULL;
685
686 }
687
688 /**
689  * gelic_net_set_txdescr_cmdstat - sets the tx descriptor command field
690  * @descr: descriptor structure to fill out
691  * @skb: packet to consider
692  *
693  * fills out the command and status field of the descriptor structure,
694  * depending on hardware checksum settings. This function assumes a wmb()
695  * has executed before.
696  */
697 static void gelic_descr_set_tx_cmdstat(struct gelic_descr *descr,
698                                        struct sk_buff *skb)
699 {
700         if (skb->ip_summed != CHECKSUM_PARTIAL)
701                 descr->dmac_cmd_status =
702                         cpu_to_be32(GELIC_DESCR_DMA_CMD_NO_CHKSUM |
703                                     GELIC_DESCR_TX_DMA_FRAME_TAIL);
704         else {
705                 /* is packet ip?
706                  * if yes: tcp? udp? */
707                 if (skb->protocol == htons(ETH_P_IP)) {
708                         if (ip_hdr(skb)->protocol == IPPROTO_TCP)
709                                 descr->dmac_cmd_status =
710                                 cpu_to_be32(GELIC_DESCR_DMA_CMD_TCP_CHKSUM |
711                                             GELIC_DESCR_TX_DMA_FRAME_TAIL);
712
713                         else if (ip_hdr(skb)->protocol == IPPROTO_UDP)
714                                 descr->dmac_cmd_status =
715                                 cpu_to_be32(GELIC_DESCR_DMA_CMD_UDP_CHKSUM |
716                                             GELIC_DESCR_TX_DMA_FRAME_TAIL);
717                         else    /*
718                                  * the stack should checksum non-tcp and non-udp
719                                  * packets on his own: NETIF_F_IP_CSUM
720                                  */
721                                 descr->dmac_cmd_status =
722                                 cpu_to_be32(GELIC_DESCR_DMA_CMD_NO_CHKSUM |
723                                             GELIC_DESCR_TX_DMA_FRAME_TAIL);
724                 }
725         }
726 }
727
728 static struct sk_buff *gelic_put_vlan_tag(struct sk_buff *skb,
729                                                  unsigned short tag)
730 {
731         struct vlan_ethhdr *veth;
732         static unsigned int c;
733
734         if (skb_headroom(skb) < VLAN_HLEN) {
735                 struct sk_buff *sk_tmp = skb;
736                 pr_debug("%s: hd=%d c=%ud\n", __func__, skb_headroom(skb), c);
737                 skb = skb_realloc_headroom(sk_tmp, VLAN_HLEN);
738                 if (!skb)
739                         return NULL;
740                 dev_kfree_skb_any(sk_tmp);
741         }
742         veth = skb_push(skb, VLAN_HLEN);
743
744         /* Move the mac addresses to the top of buffer */
745         memmove(skb->data, skb->data + VLAN_HLEN, 2 * ETH_ALEN);
746
747         veth->h_vlan_proto = cpu_to_be16(ETH_P_8021Q);
748         veth->h_vlan_TCI = htons(tag);
749
750         return skb;
751 }
752
753 /**
754  * gelic_descr_prepare_tx - setup a descriptor for sending packets
755  * @card: card structure
756  * @descr: descriptor structure
757  * @skb: packet to use
758  *
759  * returns 0 on success, <0 on failure.
760  *
761  */
762 static int gelic_descr_prepare_tx(struct gelic_card *card,
763                                   struct gelic_descr *descr,
764                                   struct sk_buff *skb)
765 {
766         dma_addr_t buf;
767
768         if (card->vlan_required) {
769                 struct sk_buff *skb_tmp;
770                 enum gelic_port_type type;
771
772                 type = netdev_port(skb->dev)->type;
773                 skb_tmp = gelic_put_vlan_tag(skb,
774                                              card->vlan[type].tx);
775                 if (!skb_tmp)
776                         return -ENOMEM;
777                 skb = skb_tmp;
778         }
779
780         buf = dma_map_single(ctodev(card), skb->data, skb->len, DMA_TO_DEVICE);
781
782         if (!buf) {
783                 dev_err(ctodev(card),
784                         "dma map 2 failed (%p, %i). Dropping packet\n",
785                         skb->data, skb->len);
786                 return -ENOMEM;
787         }
788
789         descr->buf_addr = cpu_to_be32(buf);
790         descr->buf_size = cpu_to_be32(skb->len);
791         descr->skb = skb;
792         descr->data_status = 0;
793         descr->next_descr_addr = 0; /* terminate hw descr */
794         gelic_descr_set_tx_cmdstat(descr, skb);
795
796         /* bump free descriptor pointer */
797         card->tx_chain.head = descr->next;
798         return 0;
799 }
800
801 /**
802  * gelic_card_kick_txdma - enables TX DMA processing
803  * @card: card structure
804  * @descr: descriptor address to enable TX processing at
805  *
806  */
807 static int gelic_card_kick_txdma(struct gelic_card *card,
808                                  struct gelic_descr *descr)
809 {
810         int status = 0;
811
812         if (card->tx_dma_progress)
813                 return 0;
814
815         if (gelic_descr_get_status(descr) == GELIC_DESCR_DMA_CARDOWNED) {
816                 card->tx_dma_progress = 1;
817                 status = lv1_net_start_tx_dma(bus_id(card), dev_id(card),
818                                               descr->bus_addr, 0);
819                 if (status) {
820                         card->tx_dma_progress = 0;
821                         dev_info(ctodev(card), "lv1_net_start_txdma failed," \
822                                  "status=%d\n", status);
823                 }
824         }
825         return status;
826 }
827
828 /**
829  * gelic_net_xmit - transmits a frame over the device
830  * @skb: packet to send out
831  * @netdev: interface device structure
832  *
833  * returns NETDEV_TX_OK on success, NETDEV_TX_BUSY on failure
834  */
835 netdev_tx_t gelic_net_xmit(struct sk_buff *skb, struct net_device *netdev)
836 {
837         struct gelic_card *card = netdev_card(netdev);
838         struct gelic_descr *descr;
839         int result;
840         unsigned long flags;
841
842         spin_lock_irqsave(&card->tx_lock, flags);
843
844         gelic_card_release_tx_chain(card, 0);
845
846         descr = gelic_card_get_next_tx_descr(card);
847         if (!descr) {
848                 /*
849                  * no more descriptors free
850                  */
851                 gelic_card_stop_queues(card);
852                 spin_unlock_irqrestore(&card->tx_lock, flags);
853                 return NETDEV_TX_BUSY;
854         }
855
856         result = gelic_descr_prepare_tx(card, descr, skb);
857         if (result) {
858                 /*
859                  * DMA map failed.  As chances are that failure
860                  * would continue, just release skb and return
861                  */
862                 netdev->stats.tx_dropped++;
863                 dev_kfree_skb_any(skb);
864                 spin_unlock_irqrestore(&card->tx_lock, flags);
865                 return NETDEV_TX_OK;
866         }
867         /*
868          * link this prepared descriptor to previous one
869          * to achieve high performance
870          */
871         descr->prev->next_descr_addr = cpu_to_be32(descr->bus_addr);
872         /*
873          * as hardware descriptor is modified in the above lines,
874          * ensure that the hardware sees it
875          */
876         wmb();
877         if (gelic_card_kick_txdma(card, descr)) {
878                 /*
879                  * kick failed.
880                  * release descriptor which was just prepared
881                  */
882                 netdev->stats.tx_dropped++;
883                 /* don't trigger BUG_ON() in gelic_descr_release_tx */
884                 descr->data_status = cpu_to_be32(GELIC_DESCR_TX_TAIL);
885                 gelic_descr_release_tx(card, descr);
886                 /* reset head */
887                 card->tx_chain.head = descr;
888                 /* reset hw termination */
889                 descr->prev->next_descr_addr = 0;
890                 dev_info(ctodev(card), "%s: kick failure\n", __func__);
891         }
892
893         spin_unlock_irqrestore(&card->tx_lock, flags);
894         return NETDEV_TX_OK;
895 }
896
897 /**
898  * gelic_net_pass_skb_up - takes an skb from a descriptor and passes it on
899  * @descr: descriptor to process
900  * @card: card structure
901  * @netdev: net_device structure to be passed packet
902  *
903  * iommu-unmaps the skb, fills out skb structure and passes the data to the
904  * stack. The descriptor state is not changed.
905  */
906 static void gelic_net_pass_skb_up(struct gelic_descr *descr,
907                                   struct gelic_card *card,
908                                   struct net_device *netdev)
909
910 {
911         struct sk_buff *skb = descr->skb;
912         u32 data_status, data_error;
913
914         data_status = be32_to_cpu(descr->data_status);
915         data_error = be32_to_cpu(descr->data_error);
916         /* unmap skb buffer */
917         dma_unmap_single(ctodev(card), be32_to_cpu(descr->buf_addr),
918                          GELIC_NET_MAX_MTU,
919                          DMA_FROM_DEVICE);
920
921         skb_put(skb, be32_to_cpu(descr->valid_size)?
922                 be32_to_cpu(descr->valid_size) :
923                 be32_to_cpu(descr->result_size));
924         if (!descr->valid_size)
925                 dev_info(ctodev(card), "buffer full %x %x %x\n",
926                          be32_to_cpu(descr->result_size),
927                          be32_to_cpu(descr->buf_size),
928                          be32_to_cpu(descr->dmac_cmd_status));
929
930         descr->skb = NULL;
931         /*
932          * the card put 2 bytes vlan tag in front
933          * of the ethernet frame
934          */
935         skb_pull(skb, 2);
936         skb->protocol = eth_type_trans(skb, netdev);
937
938         /* checksum offload */
939         if (netdev->features & NETIF_F_RXCSUM) {
940                 if ((data_status & GELIC_DESCR_DATA_STATUS_CHK_MASK) &&
941                     (!(data_error & GELIC_DESCR_DATA_ERROR_CHK_MASK)))
942                         skb->ip_summed = CHECKSUM_UNNECESSARY;
943                 else
944                         skb_checksum_none_assert(skb);
945         } else
946                 skb_checksum_none_assert(skb);
947
948         /* update netdevice statistics */
949         netdev->stats.rx_packets++;
950         netdev->stats.rx_bytes += skb->len;
951
952         /* pass skb up to stack */
953         netif_receive_skb(skb);
954 }
955
956 /**
957  * gelic_card_decode_one_descr - processes an rx descriptor
958  * @card: card structure
959  *
960  * returns 1 if a packet has been sent to the stack, otherwise 0
961  *
962  * processes an rx descriptor by iommu-unmapping the data buffer and passing
963  * the packet up to the stack
964  */
965 static int gelic_card_decode_one_descr(struct gelic_card *card)
966 {
967         enum gelic_descr_dma_status status;
968         struct gelic_descr_chain *chain = &card->rx_chain;
969         struct gelic_descr *descr = chain->head;
970         struct net_device *netdev = NULL;
971         int dmac_chain_ended;
972
973         status = gelic_descr_get_status(descr);
974
975         if (status == GELIC_DESCR_DMA_CARDOWNED)
976                 return 0;
977
978         if (status == GELIC_DESCR_DMA_NOT_IN_USE) {
979                 dev_dbg(ctodev(card), "dormant descr? %p\n", descr);
980                 return 0;
981         }
982
983         /* netdevice select */
984         if (card->vlan_required) {
985                 unsigned int i;
986                 u16 vid;
987                 vid = *(u16 *)(descr->skb->data) & VLAN_VID_MASK;
988                 for (i = 0; i < GELIC_PORT_MAX; i++) {
989                         if (card->vlan[i].rx == vid) {
990                                 netdev = card->netdev[i];
991                                 break;
992                         }
993                 }
994                 if (GELIC_PORT_MAX <= i) {
995                         pr_info("%s: unknown packet vid=%x\n", __func__, vid);
996                         goto refill;
997                 }
998         } else
999                 netdev = card->netdev[GELIC_PORT_ETHERNET_0];
1000
1001         if ((status == GELIC_DESCR_DMA_RESPONSE_ERROR) ||
1002             (status == GELIC_DESCR_DMA_PROTECTION_ERROR) ||
1003             (status == GELIC_DESCR_DMA_FORCE_END)) {
1004                 dev_info(ctodev(card), "dropping RX descriptor with state %x\n",
1005                          status);
1006                 netdev->stats.rx_dropped++;
1007                 goto refill;
1008         }
1009
1010         if (status == GELIC_DESCR_DMA_BUFFER_FULL) {
1011                 /*
1012                  * Buffer full would occur if and only if
1013                  * the frame length was longer than the size of this
1014                  * descriptor's buffer.  If the frame length was equal
1015                  * to or shorter than buffer'size, FRAME_END condition
1016                  * would occur.
1017                  * Anyway this frame was longer than the MTU,
1018                  * just drop it.
1019                  */
1020                 dev_info(ctodev(card), "overlength frame\n");
1021                 goto refill;
1022         }
1023         /*
1024          * descriptors any other than FRAME_END here should
1025          * be treated as error.
1026          */
1027         if (status != GELIC_DESCR_DMA_FRAME_END) {
1028                 dev_dbg(ctodev(card), "RX descriptor with state %x\n",
1029                         status);
1030                 goto refill;
1031         }
1032
1033         /* ok, we've got a packet in descr */
1034         gelic_net_pass_skb_up(descr, card, netdev);
1035 refill:
1036
1037         /* is the current descriptor terminated with next_descr == NULL? */
1038         dmac_chain_ended =
1039                 be32_to_cpu(descr->dmac_cmd_status) &
1040                 GELIC_DESCR_RX_DMA_CHAIN_END;
1041         /*
1042          * So that always DMAC can see the end
1043          * of the descriptor chain to avoid
1044          * from unwanted DMAC overrun.
1045          */
1046         descr->next_descr_addr = 0;
1047
1048         /* change the descriptor state: */
1049         gelic_descr_set_status(descr, GELIC_DESCR_DMA_NOT_IN_USE);
1050
1051         /*
1052          * this call can fail, but for now, just leave this
1053          * descriptor without skb
1054          */
1055         gelic_descr_prepare_rx(card, descr);
1056
1057         chain->tail = descr;
1058         chain->head = descr->next;
1059
1060         /*
1061          * Set this descriptor the end of the chain.
1062          */
1063         descr->prev->next_descr_addr = cpu_to_be32(descr->bus_addr);
1064
1065         /*
1066          * If dmac chain was met, DMAC stopped.
1067          * thus re-enable it
1068          */
1069
1070         if (dmac_chain_ended)
1071                 gelic_card_enable_rxdmac(card);
1072
1073         return 1;
1074 }
1075
1076 /**
1077  * gelic_net_poll - NAPI poll function called by the stack to return packets
1078  * @napi: napi structure
1079  * @budget: number of packets we can pass to the stack at most
1080  *
1081  * returns the number of the processed packets
1082  *
1083  */
1084 static int gelic_net_poll(struct napi_struct *napi, int budget)
1085 {
1086         struct gelic_card *card = container_of(napi, struct gelic_card, napi);
1087         int packets_done = 0;
1088
1089         while (packets_done < budget) {
1090                 if (!gelic_card_decode_one_descr(card))
1091                         break;
1092
1093                 packets_done++;
1094         }
1095
1096         if (packets_done < budget) {
1097                 napi_complete_done(napi, packets_done);
1098                 gelic_card_rx_irq_on(card);
1099         }
1100         return packets_done;
1101 }
1102
1103 /*
1104  * gelic_card_interrupt - event handler for gelic_net
1105  */
1106 static irqreturn_t gelic_card_interrupt(int irq, void *ptr)
1107 {
1108         unsigned long flags;
1109         struct gelic_card *card = ptr;
1110         u64 status;
1111
1112         status = card->irq_status;
1113
1114         if (!status)
1115                 return IRQ_NONE;
1116
1117         status &= card->irq_mask;
1118
1119         if (status & GELIC_CARD_RXINT) {
1120                 gelic_card_rx_irq_off(card);
1121                 napi_schedule(&card->napi);
1122         }
1123
1124         if (status & GELIC_CARD_TXINT) {
1125                 spin_lock_irqsave(&card->tx_lock, flags);
1126                 card->tx_dma_progress = 0;
1127                 gelic_card_release_tx_chain(card, 0);
1128                 /* kick outstanding tx descriptor if any */
1129                 gelic_card_kick_txdma(card, card->tx_chain.tail);
1130                 spin_unlock_irqrestore(&card->tx_lock, flags);
1131         }
1132
1133         /* ether port status changed */
1134         if (status & GELIC_CARD_PORT_STATUS_CHANGED)
1135                 gelic_card_get_ether_port_status(card, 1);
1136
1137 #ifdef CONFIG_GELIC_WIRELESS
1138         if (status & (GELIC_CARD_WLAN_EVENT_RECEIVED |
1139                       GELIC_CARD_WLAN_COMMAND_COMPLETED))
1140                 gelic_wl_interrupt(card->netdev[GELIC_PORT_WIRELESS], status);
1141 #endif
1142
1143         return IRQ_HANDLED;
1144 }
1145
1146 #ifdef CONFIG_NET_POLL_CONTROLLER
1147 /**
1148  * gelic_net_poll_controller - artificial interrupt for netconsole etc.
1149  * @netdev: interface device structure
1150  *
1151  * see Documentation/networking/netconsole.rst
1152  */
1153 void gelic_net_poll_controller(struct net_device *netdev)
1154 {
1155         struct gelic_card *card = netdev_card(netdev);
1156
1157         gelic_card_set_irq_mask(card, 0);
1158         gelic_card_interrupt(netdev->irq, netdev);
1159         gelic_card_set_irq_mask(card, card->irq_mask);
1160 }
1161 #endif /* CONFIG_NET_POLL_CONTROLLER */
1162
1163 /**
1164  * gelic_net_open - called upon ifconfig up
1165  * @netdev: interface device structure
1166  *
1167  * returns 0 on success, <0 on failure
1168  *
1169  * gelic_net_open allocates all the descriptors and memory needed for
1170  * operation, sets up multicast list and enables interrupts
1171  */
1172 int gelic_net_open(struct net_device *netdev)
1173 {
1174         struct gelic_card *card = netdev_card(netdev);
1175
1176         dev_dbg(ctodev(card), " -> %s %p\n", __func__, netdev);
1177
1178         gelic_card_up(card);
1179
1180         netif_start_queue(netdev);
1181         gelic_card_get_ether_port_status(card, 1);
1182
1183         dev_dbg(ctodev(card), " <- %s\n", __func__);
1184         return 0;
1185 }
1186
1187 void gelic_net_get_drvinfo(struct net_device *netdev,
1188                            struct ethtool_drvinfo *info)
1189 {
1190         strlcpy(info->driver, DRV_NAME, sizeof(info->driver));
1191         strlcpy(info->version, DRV_VERSION, sizeof(info->version));
1192 }
1193
1194 static int gelic_ether_get_link_ksettings(struct net_device *netdev,
1195                                           struct ethtool_link_ksettings *cmd)
1196 {
1197         struct gelic_card *card = netdev_card(netdev);
1198         u32 supported, advertising;
1199
1200         gelic_card_get_ether_port_status(card, 0);
1201
1202         if (card->ether_port_status & GELIC_LV1_ETHER_FULL_DUPLEX)
1203                 cmd->base.duplex = DUPLEX_FULL;
1204         else
1205                 cmd->base.duplex = DUPLEX_HALF;
1206
1207         switch (card->ether_port_status & GELIC_LV1_ETHER_SPEED_MASK) {
1208         case GELIC_LV1_ETHER_SPEED_10:
1209                 cmd->base.speed = SPEED_10;
1210                 break;
1211         case GELIC_LV1_ETHER_SPEED_100:
1212                 cmd->base.speed = SPEED_100;
1213                 break;
1214         case GELIC_LV1_ETHER_SPEED_1000:
1215                 cmd->base.speed = SPEED_1000;
1216                 break;
1217         default:
1218                 pr_info("%s: speed unknown\n", __func__);
1219                 cmd->base.speed = SPEED_10;
1220                 break;
1221         }
1222
1223         supported = SUPPORTED_TP | SUPPORTED_Autoneg |
1224                         SUPPORTED_10baseT_Half | SUPPORTED_10baseT_Full |
1225                         SUPPORTED_100baseT_Half | SUPPORTED_100baseT_Full |
1226                         SUPPORTED_1000baseT_Full;
1227         advertising = supported;
1228         if (card->link_mode & GELIC_LV1_ETHER_AUTO_NEG) {
1229                 cmd->base.autoneg = AUTONEG_ENABLE;
1230         } else {
1231                 cmd->base.autoneg = AUTONEG_DISABLE;
1232                 advertising &= ~ADVERTISED_Autoneg;
1233         }
1234         cmd->base.port = PORT_TP;
1235
1236         ethtool_convert_legacy_u32_to_link_mode(cmd->link_modes.supported,
1237                                                 supported);
1238         ethtool_convert_legacy_u32_to_link_mode(cmd->link_modes.advertising,
1239                                                 advertising);
1240
1241         return 0;
1242 }
1243
1244 static int
1245 gelic_ether_set_link_ksettings(struct net_device *netdev,
1246                                const struct ethtool_link_ksettings *cmd)
1247 {
1248         struct gelic_card *card = netdev_card(netdev);
1249         u64 mode;
1250         int ret;
1251
1252         if (cmd->base.autoneg == AUTONEG_ENABLE) {
1253                 mode = GELIC_LV1_ETHER_AUTO_NEG;
1254         } else {
1255                 switch (cmd->base.speed) {
1256                 case SPEED_10:
1257                         mode = GELIC_LV1_ETHER_SPEED_10;
1258                         break;
1259                 case SPEED_100:
1260                         mode = GELIC_LV1_ETHER_SPEED_100;
1261                         break;
1262                 case SPEED_1000:
1263                         mode = GELIC_LV1_ETHER_SPEED_1000;
1264                         break;
1265                 default:
1266                         return -EINVAL;
1267                 }
1268                 if (cmd->base.duplex == DUPLEX_FULL) {
1269                         mode |= GELIC_LV1_ETHER_FULL_DUPLEX;
1270                 } else if (cmd->base.speed == SPEED_1000) {
1271                         pr_info("1000 half duplex is not supported.\n");
1272                         return -EINVAL;
1273                 }
1274         }
1275
1276         ret = gelic_card_set_link_mode(card, mode);
1277
1278         if (ret)
1279                 return ret;
1280
1281         return 0;
1282 }
1283
1284 static void gelic_net_get_wol(struct net_device *netdev,
1285                               struct ethtool_wolinfo *wol)
1286 {
1287         if (0 <= ps3_compare_firmware_version(2, 2, 0))
1288                 wol->supported = WAKE_MAGIC;
1289         else
1290                 wol->supported = 0;
1291
1292         wol->wolopts = ps3_sys_manager_get_wol() ? wol->supported : 0;
1293         memset(&wol->sopass, 0, sizeof(wol->sopass));
1294 }
1295 static int gelic_net_set_wol(struct net_device *netdev,
1296                              struct ethtool_wolinfo *wol)
1297 {
1298         int status;
1299         struct gelic_card *card;
1300         u64 v1, v2;
1301
1302         if (ps3_compare_firmware_version(2, 2, 0) < 0 ||
1303             !capable(CAP_NET_ADMIN))
1304                 return -EPERM;
1305
1306         if (wol->wolopts & ~WAKE_MAGIC)
1307                 return -EINVAL;
1308
1309         card = netdev_card(netdev);
1310         if (wol->wolopts & WAKE_MAGIC) {
1311                 status = lv1_net_control(bus_id(card), dev_id(card),
1312                                          GELIC_LV1_SET_WOL,
1313                                          GELIC_LV1_WOL_MAGIC_PACKET,
1314                                          0, GELIC_LV1_WOL_MP_ENABLE,
1315                                          &v1, &v2);
1316                 if (status) {
1317                         pr_info("%s: enabling WOL failed %d\n", __func__,
1318                                 status);
1319                         status = -EIO;
1320                         goto done;
1321                 }
1322                 status = lv1_net_control(bus_id(card), dev_id(card),
1323                                          GELIC_LV1_SET_WOL,
1324                                          GELIC_LV1_WOL_ADD_MATCH_ADDR,
1325                                          0, GELIC_LV1_WOL_MATCH_ALL,
1326                                          &v1, &v2);
1327                 if (!status)
1328                         ps3_sys_manager_set_wol(1);
1329                 else {
1330                         pr_info("%s: enabling WOL filter failed %d\n",
1331                                 __func__, status);
1332                         status = -EIO;
1333                 }
1334         } else {
1335                 status = lv1_net_control(bus_id(card), dev_id(card),
1336                                          GELIC_LV1_SET_WOL,
1337                                          GELIC_LV1_WOL_MAGIC_PACKET,
1338                                          0, GELIC_LV1_WOL_MP_DISABLE,
1339                                          &v1, &v2);
1340                 if (status) {
1341                         pr_info("%s: disabling WOL failed %d\n", __func__,
1342                                 status);
1343                         status = -EIO;
1344                         goto done;
1345                 }
1346                 status = lv1_net_control(bus_id(card), dev_id(card),
1347                                          GELIC_LV1_SET_WOL,
1348                                          GELIC_LV1_WOL_DELETE_MATCH_ADDR,
1349                                          0, GELIC_LV1_WOL_MATCH_ALL,
1350                                          &v1, &v2);
1351                 if (!status)
1352                         ps3_sys_manager_set_wol(0);
1353                 else {
1354                         pr_info("%s: removing WOL filter failed %d\n",
1355                                 __func__, status);
1356                         status = -EIO;
1357                 }
1358         }
1359 done:
1360         return status;
1361 }
1362
1363 static const struct ethtool_ops gelic_ether_ethtool_ops = {
1364         .get_drvinfo    = gelic_net_get_drvinfo,
1365         .get_link       = ethtool_op_get_link,
1366         .get_wol        = gelic_net_get_wol,
1367         .set_wol        = gelic_net_set_wol,
1368         .get_link_ksettings = gelic_ether_get_link_ksettings,
1369         .set_link_ksettings = gelic_ether_set_link_ksettings,
1370 };
1371
1372 /**
1373  * gelic_net_tx_timeout_task - task scheduled by the watchdog timeout
1374  * function (to be called not under interrupt status)
1375  * @work: work is context of tx timout task
1376  *
1377  * called as task when tx hangs, resets interface (if interface is up)
1378  */
1379 static void gelic_net_tx_timeout_task(struct work_struct *work)
1380 {
1381         struct gelic_card *card =
1382                 container_of(work, struct gelic_card, tx_timeout_task);
1383         struct net_device *netdev = card->netdev[GELIC_PORT_ETHERNET_0];
1384
1385         dev_info(ctodev(card), "%s:Timed out. Restarting...\n", __func__);
1386
1387         if (!(netdev->flags & IFF_UP))
1388                 goto out;
1389
1390         netif_device_detach(netdev);
1391         gelic_net_stop(netdev);
1392
1393         gelic_net_open(netdev);
1394         netif_device_attach(netdev);
1395
1396 out:
1397         atomic_dec(&card->tx_timeout_task_counter);
1398 }
1399
1400 /**
1401  * gelic_net_tx_timeout - called when the tx timeout watchdog kicks in.
1402  * @netdev: interface device structure
1403  * @txqueue: unused
1404  *
1405  * called, if tx hangs. Schedules a task that resets the interface
1406  */
1407 void gelic_net_tx_timeout(struct net_device *netdev, unsigned int txqueue)
1408 {
1409         struct gelic_card *card;
1410
1411         card = netdev_card(netdev);
1412         atomic_inc(&card->tx_timeout_task_counter);
1413         if (netdev->flags & IFF_UP)
1414                 schedule_work(&card->tx_timeout_task);
1415         else
1416                 atomic_dec(&card->tx_timeout_task_counter);
1417 }
1418
1419 static const struct net_device_ops gelic_netdevice_ops = {
1420         .ndo_open = gelic_net_open,
1421         .ndo_stop = gelic_net_stop,
1422         .ndo_start_xmit = gelic_net_xmit,
1423         .ndo_set_rx_mode = gelic_net_set_multi,
1424         .ndo_tx_timeout = gelic_net_tx_timeout,
1425         .ndo_set_mac_address = eth_mac_addr,
1426         .ndo_validate_addr = eth_validate_addr,
1427 #ifdef CONFIG_NET_POLL_CONTROLLER
1428         .ndo_poll_controller = gelic_net_poll_controller,
1429 #endif
1430 };
1431
1432 /**
1433  * gelic_ether_setup_netdev_ops - initialization of net_device operations
1434  * @netdev: net_device structure
1435  * @napi: napi structure
1436  *
1437  * fills out function pointers in the net_device structure
1438  */
1439 static void gelic_ether_setup_netdev_ops(struct net_device *netdev,
1440                                          struct napi_struct *napi)
1441 {
1442         netdev->watchdog_timeo = GELIC_NET_WATCHDOG_TIMEOUT;
1443         /* NAPI */
1444         netif_napi_add(netdev, napi, gelic_net_poll, NAPI_POLL_WEIGHT);
1445         netdev->ethtool_ops = &gelic_ether_ethtool_ops;
1446         netdev->netdev_ops = &gelic_netdevice_ops;
1447 }
1448
1449 /**
1450  * gelic_ether_setup_netdev - initialization of net_device
1451  * @netdev: net_device structure
1452  * @card: card structure
1453  *
1454  * Returns 0 on success or <0 on failure
1455  *
1456  * gelic_ether_setup_netdev initializes the net_device structure
1457  * and register it.
1458  **/
1459 int gelic_net_setup_netdev(struct net_device *netdev, struct gelic_card *card)
1460 {
1461         int status;
1462         u64 v1, v2;
1463
1464         netdev->hw_features = NETIF_F_IP_CSUM | NETIF_F_RXCSUM;
1465
1466         netdev->features = NETIF_F_IP_CSUM;
1467         if (GELIC_CARD_RX_CSUM_DEFAULT)
1468                 netdev->features |= NETIF_F_RXCSUM;
1469
1470         status = lv1_net_control(bus_id(card), dev_id(card),
1471                                  GELIC_LV1_GET_MAC_ADDRESS,
1472                                  0, 0, 0, &v1, &v2);
1473         v1 <<= 16;
1474         if (status || !is_valid_ether_addr((u8 *)&v1)) {
1475                 dev_info(ctodev(card),
1476                          "%s:lv1_net_control GET_MAC_ADDR failed %d\n",
1477                          __func__, status);
1478                 return -EINVAL;
1479         }
1480         memcpy(netdev->dev_addr, &v1, ETH_ALEN);
1481
1482         if (card->vlan_required) {
1483                 netdev->hard_header_len += VLAN_HLEN;
1484                 /*
1485                  * As vlan is internally used,
1486                  * we can not receive vlan packets
1487                  */
1488                 netdev->features |= NETIF_F_VLAN_CHALLENGED;
1489         }
1490
1491         /* MTU range: 64 - 1518 */
1492         netdev->min_mtu = GELIC_NET_MIN_MTU;
1493         netdev->max_mtu = GELIC_NET_MAX_MTU;
1494
1495         status = register_netdev(netdev);
1496         if (status) {
1497                 dev_err(ctodev(card), "%s:Couldn't register %s %d\n",
1498                         __func__, netdev->name, status);
1499                 return status;
1500         }
1501         dev_info(ctodev(card), "%s: MAC addr %pM\n",
1502                  netdev->name, netdev->dev_addr);
1503
1504         return 0;
1505 }
1506
1507 /**
1508  * gelic_alloc_card_net - allocates net_device and card structure
1509  *
1510  * returns the card structure or NULL in case of errors
1511  *
1512  * the card and net_device structures are linked to each other
1513  */
1514 #define GELIC_ALIGN (32)
1515 static struct gelic_card *gelic_alloc_card_net(struct net_device **netdev)
1516 {
1517         struct gelic_card *card;
1518         struct gelic_port *port;
1519         void *p;
1520         size_t alloc_size;
1521         /*
1522          * gelic requires dma descriptor is 32 bytes aligned and
1523          * the hypervisor requires irq_status is 8 bytes aligned.
1524          */
1525         BUILD_BUG_ON(offsetof(struct gelic_card, irq_status) % 8);
1526         BUILD_BUG_ON(offsetof(struct gelic_card, descr) % 32);
1527         alloc_size =
1528                 sizeof(struct gelic_card) +
1529                 sizeof(struct gelic_descr) * GELIC_NET_RX_DESCRIPTORS +
1530                 sizeof(struct gelic_descr) * GELIC_NET_TX_DESCRIPTORS +
1531                 GELIC_ALIGN - 1;
1532
1533         p  = kzalloc(alloc_size, GFP_KERNEL);
1534         if (!p)
1535                 return NULL;
1536         card = PTR_ALIGN(p, GELIC_ALIGN);
1537         card->unalign = p;
1538
1539         /*
1540          * alloc netdev
1541          */
1542         *netdev = alloc_etherdev(sizeof(struct gelic_port));
1543         if (!*netdev) {
1544                 kfree(card->unalign);
1545                 return NULL;
1546         }
1547         port = netdev_priv(*netdev);
1548
1549         /* gelic_port */
1550         port->netdev = *netdev;
1551         port->card = card;
1552         port->type = GELIC_PORT_ETHERNET_0;
1553
1554         /* gelic_card */
1555         card->netdev[GELIC_PORT_ETHERNET_0] = *netdev;
1556
1557         INIT_WORK(&card->tx_timeout_task, gelic_net_tx_timeout_task);
1558         init_waitqueue_head(&card->waitq);
1559         atomic_set(&card->tx_timeout_task_counter, 0);
1560         mutex_init(&card->updown_lock);
1561         atomic_set(&card->users, 0);
1562
1563         return card;
1564 }
1565
1566 static void gelic_card_get_vlan_info(struct gelic_card *card)
1567 {
1568         u64 v1, v2;
1569         int status;
1570         unsigned int i;
1571         struct {
1572                 int tx;
1573                 int rx;
1574         } vlan_id_ix[2] = {
1575                 [GELIC_PORT_ETHERNET_0] = {
1576                         .tx = GELIC_LV1_VLAN_TX_ETHERNET_0,
1577                         .rx = GELIC_LV1_VLAN_RX_ETHERNET_0
1578                 },
1579                 [GELIC_PORT_WIRELESS] = {
1580                         .tx = GELIC_LV1_VLAN_TX_WIRELESS,
1581                         .rx = GELIC_LV1_VLAN_RX_WIRELESS
1582                 }
1583         };
1584
1585         for (i = 0; i < ARRAY_SIZE(vlan_id_ix); i++) {
1586                 /* tx tag */
1587                 status = lv1_net_control(bus_id(card), dev_id(card),
1588                                          GELIC_LV1_GET_VLAN_ID,
1589                                          vlan_id_ix[i].tx,
1590                                          0, 0, &v1, &v2);
1591                 if (status || !v1) {
1592                         if (status != LV1_NO_ENTRY)
1593                                 dev_dbg(ctodev(card),
1594                                         "get vlan id for tx(%d) failed(%d)\n",
1595                                         vlan_id_ix[i].tx, status);
1596                         card->vlan[i].tx = 0;
1597                         card->vlan[i].rx = 0;
1598                         continue;
1599                 }
1600                 card->vlan[i].tx = (u16)v1;
1601
1602                 /* rx tag */
1603                 status = lv1_net_control(bus_id(card), dev_id(card),
1604                                          GELIC_LV1_GET_VLAN_ID,
1605                                          vlan_id_ix[i].rx,
1606                                          0, 0, &v1, &v2);
1607                 if (status || !v1) {
1608                         if (status != LV1_NO_ENTRY)
1609                                 dev_info(ctodev(card),
1610                                          "get vlan id for rx(%d) failed(%d)\n",
1611                                          vlan_id_ix[i].rx, status);
1612                         card->vlan[i].tx = 0;
1613                         card->vlan[i].rx = 0;
1614                         continue;
1615                 }
1616                 card->vlan[i].rx = (u16)v1;
1617
1618                 dev_dbg(ctodev(card), "vlan_id[%d] tx=%02x rx=%02x\n",
1619                         i, card->vlan[i].tx, card->vlan[i].rx);
1620         }
1621
1622         if (card->vlan[GELIC_PORT_ETHERNET_0].tx) {
1623                 BUG_ON(!card->vlan[GELIC_PORT_WIRELESS].tx);
1624                 card->vlan_required = 1;
1625         } else
1626                 card->vlan_required = 0;
1627
1628         /* check wirelss capable firmware */
1629         if (ps3_compare_firmware_version(1, 6, 0) < 0) {
1630                 card->vlan[GELIC_PORT_WIRELESS].tx = 0;
1631                 card->vlan[GELIC_PORT_WIRELESS].rx = 0;
1632         }
1633
1634         dev_info(ctodev(card), "internal vlan %s\n",
1635                  card->vlan_required? "enabled" : "disabled");
1636 }
1637 /*
1638  * ps3_gelic_driver_probe - add a device to the control of this driver
1639  */
1640 static int ps3_gelic_driver_probe(struct ps3_system_bus_device *dev)
1641 {
1642         struct gelic_card *card;
1643         struct net_device *netdev;
1644         int result;
1645
1646         pr_debug("%s: called\n", __func__);
1647
1648         udbg_shutdown_ps3gelic();
1649
1650         result = ps3_open_hv_device(dev);
1651
1652         if (result) {
1653                 dev_dbg(&dev->core, "%s:ps3_open_hv_device failed\n",
1654                         __func__);
1655                 goto fail_open;
1656         }
1657
1658         result = ps3_dma_region_create(dev->d_region);
1659
1660         if (result) {
1661                 dev_dbg(&dev->core, "%s:ps3_dma_region_create failed(%d)\n",
1662                         __func__, result);
1663                 BUG_ON("check region type");
1664                 goto fail_dma_region;
1665         }
1666
1667         /* alloc card/netdevice */
1668         card = gelic_alloc_card_net(&netdev);
1669         if (!card) {
1670                 dev_info(&dev->core, "%s:gelic_net_alloc_card failed\n",
1671                          __func__);
1672                 result = -ENOMEM;
1673                 goto fail_alloc_card;
1674         }
1675         ps3_system_bus_set_drvdata(dev, card);
1676         card->dev = dev;
1677
1678         /* get internal vlan info */
1679         gelic_card_get_vlan_info(card);
1680
1681         card->link_mode = GELIC_LV1_ETHER_AUTO_NEG;
1682
1683         /* setup interrupt */
1684         result = lv1_net_set_interrupt_status_indicator(bus_id(card),
1685                                                         dev_id(card),
1686                 ps3_mm_phys_to_lpar(__pa(&card->irq_status)),
1687                 0);
1688
1689         if (result) {
1690                 dev_dbg(&dev->core,
1691                         "%s:set_interrupt_status_indicator failed: %s\n",
1692                         __func__, ps3_result(result));
1693                 result = -EIO;
1694                 goto fail_status_indicator;
1695         }
1696
1697         result = ps3_sb_event_receive_port_setup(dev, PS3_BINDING_CPU_ANY,
1698                 &card->irq);
1699
1700         if (result) {
1701                 dev_info(ctodev(card),
1702                          "%s:gelic_net_open_device failed (%d)\n",
1703                          __func__, result);
1704                 result = -EPERM;
1705                 goto fail_alloc_irq;
1706         }
1707         result = request_irq(card->irq, gelic_card_interrupt,
1708                              0, netdev->name, card);
1709
1710         if (result) {
1711                 dev_info(ctodev(card), "%s:request_irq failed (%d)\n",
1712                         __func__, result);
1713                 goto fail_request_irq;
1714         }
1715
1716         /* setup card structure */
1717         card->irq_mask = GELIC_CARD_RXINT | GELIC_CARD_TXINT |
1718                 GELIC_CARD_PORT_STATUS_CHANGED;
1719
1720
1721         result = gelic_card_init_chain(card, &card->tx_chain,
1722                                        card->descr, GELIC_NET_TX_DESCRIPTORS);
1723         if (result)
1724                 goto fail_alloc_tx;
1725         result = gelic_card_init_chain(card, &card->rx_chain,
1726                                        card->descr + GELIC_NET_TX_DESCRIPTORS,
1727                                        GELIC_NET_RX_DESCRIPTORS);
1728         if (result)
1729                 goto fail_alloc_rx;
1730
1731         /* head of chain */
1732         card->tx_top = card->tx_chain.head;
1733         card->rx_top = card->rx_chain.head;
1734         dev_dbg(ctodev(card), "descr rx %p, tx %p, size %#lx, num %#x\n",
1735                 card->rx_top, card->tx_top, sizeof(struct gelic_descr),
1736                 GELIC_NET_RX_DESCRIPTORS);
1737         /* allocate rx skbs */
1738         result = gelic_card_alloc_rx_skbs(card);
1739         if (result)
1740                 goto fail_alloc_skbs;
1741
1742         spin_lock_init(&card->tx_lock);
1743         card->tx_dma_progress = 0;
1744
1745         /* setup net_device structure */
1746         netdev->irq = card->irq;
1747         SET_NETDEV_DEV(netdev, &card->dev->core);
1748         gelic_ether_setup_netdev_ops(netdev, &card->napi);
1749         result = gelic_net_setup_netdev(netdev, card);
1750         if (result) {
1751                 dev_dbg(&dev->core, "%s: setup_netdev failed %d\n",
1752                         __func__, result);
1753                 goto fail_setup_netdev;
1754         }
1755
1756 #ifdef CONFIG_GELIC_WIRELESS
1757         result = gelic_wl_driver_probe(card);
1758         if (result) {
1759                 dev_dbg(&dev->core, "%s: WL init failed\n", __func__);
1760                 goto fail_setup_netdev;
1761         }
1762 #endif
1763         pr_debug("%s: done\n", __func__);
1764         return 0;
1765
1766 fail_setup_netdev:
1767 fail_alloc_skbs:
1768         gelic_card_free_chain(card, card->rx_chain.head);
1769 fail_alloc_rx:
1770         gelic_card_free_chain(card, card->tx_chain.head);
1771 fail_alloc_tx:
1772         free_irq(card->irq, card);
1773         netdev->irq = 0;
1774 fail_request_irq:
1775         ps3_sb_event_receive_port_destroy(dev, card->irq);
1776 fail_alloc_irq:
1777         lv1_net_set_interrupt_status_indicator(bus_id(card),
1778                                                bus_id(card),
1779                                                0, 0);
1780 fail_status_indicator:
1781         ps3_system_bus_set_drvdata(dev, NULL);
1782         kfree(netdev_card(netdev)->unalign);
1783         free_netdev(netdev);
1784 fail_alloc_card:
1785         ps3_dma_region_free(dev->d_region);
1786 fail_dma_region:
1787         ps3_close_hv_device(dev);
1788 fail_open:
1789         return result;
1790 }
1791
1792 /*
1793  * ps3_gelic_driver_remove - remove a device from the control of this driver
1794  */
1795
1796 static void ps3_gelic_driver_remove(struct ps3_system_bus_device *dev)
1797 {
1798         struct gelic_card *card = ps3_system_bus_get_drvdata(dev);
1799         struct net_device *netdev0;
1800         pr_debug("%s: called\n", __func__);
1801
1802         /* set auto-negotiation */
1803         gelic_card_set_link_mode(card, GELIC_LV1_ETHER_AUTO_NEG);
1804
1805 #ifdef CONFIG_GELIC_WIRELESS
1806         gelic_wl_driver_remove(card);
1807 #endif
1808         /* stop interrupt */
1809         gelic_card_set_irq_mask(card, 0);
1810
1811         /* turn off DMA, force end */
1812         gelic_card_disable_rxdmac(card);
1813         gelic_card_disable_txdmac(card);
1814
1815         /* release chains */
1816         gelic_card_release_tx_chain(card, 1);
1817         gelic_card_release_rx_chain(card);
1818
1819         gelic_card_free_chain(card, card->tx_top);
1820         gelic_card_free_chain(card, card->rx_top);
1821
1822         netdev0 = card->netdev[GELIC_PORT_ETHERNET_0];
1823         /* disconnect event port */
1824         free_irq(card->irq, card);
1825         netdev0->irq = 0;
1826         ps3_sb_event_receive_port_destroy(card->dev, card->irq);
1827
1828         wait_event(card->waitq,
1829                    atomic_read(&card->tx_timeout_task_counter) == 0);
1830
1831         lv1_net_set_interrupt_status_indicator(bus_id(card), dev_id(card),
1832                                                0 , 0);
1833
1834         unregister_netdev(netdev0);
1835         kfree(netdev_card(netdev0)->unalign);
1836         free_netdev(netdev0);
1837
1838         ps3_system_bus_set_drvdata(dev, NULL);
1839
1840         ps3_dma_region_free(dev->d_region);
1841
1842         ps3_close_hv_device(dev);
1843
1844         pr_debug("%s: done\n", __func__);
1845 }
1846
1847 static struct ps3_system_bus_driver ps3_gelic_driver = {
1848         .match_id = PS3_MATCH_ID_GELIC,
1849         .probe = ps3_gelic_driver_probe,
1850         .remove = ps3_gelic_driver_remove,
1851         .shutdown = ps3_gelic_driver_remove,
1852         .core.name = "ps3_gelic_driver",
1853         .core.owner = THIS_MODULE,
1854 };
1855
1856 static int __init ps3_gelic_driver_init (void)
1857 {
1858         return firmware_has_feature(FW_FEATURE_PS3_LV1)
1859                 ? ps3_system_bus_driver_register(&ps3_gelic_driver)
1860                 : -ENODEV;
1861 }
1862
1863 static void __exit ps3_gelic_driver_exit (void)
1864 {
1865         ps3_system_bus_driver_unregister(&ps3_gelic_driver);
1866 }
1867
1868 module_init(ps3_gelic_driver_init);
1869 module_exit(ps3_gelic_driver_exit);
1870
1871 MODULE_ALIAS(PS3_MODULE_ALIAS_GELIC);
1872