drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c

   1 // SPDX-License-Identifier: GPL-2.0-only
   2 /*******************************************************************************
   3   This contains the functions to handle the platform driver.
   4
   5   Copyright (C) 2007-2011  STMicroelectronics Ltd
   6
   7
   8   Author: Giuseppe Cavallaro <peppe.cavallaro@st.com>
   9 *******************************************************************************/
  10
  11 #include <linux/platform_device.h>
  12 #include <linux/module.h>
  13 #include <linux/io.h>
  14 #include <linux/of.h>
  15 #include <linux/of_net.h>
  16 #include <linux/of_device.h>
  17 #include <linux/of_mdio.h>
  18
  19 #include "stmmac.h"
  20 #include "stmmac_platform.h"
  21
  22 #ifdef CONFIG_OF
  23
  24 /**
  25  * dwmac1000_validate_mcast_bins - validates the number of Multicast filter bins
  26  * @dev: struct device of the platform device
  27  * @mcast_bins: Multicast filtering bins
  28  * Description:
  29  * this function validates the number of Multicast filtering bins specified
  30  * by the configuration through the device tree. The Synopsys GMAC supports
  31  * 64 bins, 128 bins, or 256 bins. "bins" refer to the division of CRC
  32  * number space. 64 bins correspond to 6 bits of the CRC, 128 corresponds
  33  * to 7 bits, and 256 refers to 8 bits of the CRC. Any other setting is
  34  * invalid and will cause the filtering algorithm to use Multicast
  35  * promiscuous mode.
  36  */
  37 static int dwmac1000_validate_mcast_bins(struct device *dev, int mcast_bins)
  38 {
  39         int x = mcast_bins;
  40
  41         switch (x) {
  42         case HASH_TABLE_SIZE:
  43         case 128:
  44         case 256:
  45                 break;
  46         default:
  47                 x = 0;
  48                 dev_info(dev, "Hash table entries set to unexpected value %d\n",
  49                          mcast_bins);
  50                 break;
  51         }
  52         return x;
  53 }
  54
  55 /**
  56  * dwmac1000_validate_ucast_entries - validate the Unicast address entries
  57  * @dev: struct device of the platform device
  58  * @ucast_entries: number of Unicast address entries
  59  * Description:
  60  * This function validates the number of Unicast address entries supported
  61  * by a particular Synopsys 10/100/1000 controller. The Synopsys controller
  62  * supports 1..32, 64, or 128 Unicast filter entries for it's Unicast filter
  63  * logic. This function validates a valid, supported configuration is
  64  * selected, and defaults to 1 Unicast address if an unsupported
  65  * configuration is selected.
  66  */
  67 static int dwmac1000_validate_ucast_entries(struct device *dev,
  68                                             int ucast_entries)
  69 {
  70         int x = ucast_entries;
  71
  72         switch (x) {
  73         case 1 ... 32:
  74         case 64:
  75         case 128:
  76                 break;
  77         default:
  78                 x = 1;
  79                 dev_info(dev, "Unicast table entries set to unexpected value %d\n",
  80                          ucast_entries);
  81                 break;
  82         }
  83         return x;
  84 }
  85
  86 /**
  87  * stmmac_axi_setup - parse DT parameters for programming the AXI register
  88  * @pdev: platform device
  89  * Description:
  90  * if required, from device-tree the AXI internal register can be tuned
  91  * by using platform parameters.
  92  */
  93 static struct stmmac_axi *stmmac_axi_setup(struct platform_device *pdev)
  94 {
  95         struct device_node *np;
  96         struct stmmac_axi *axi;
  97
  98         np = of_parse_phandle(pdev->dev.of_node, "snps,axi-config", 0);
  99         if (!np)
 100                 return NULL;
 101
 102         axi = devm_kzalloc(&pdev->dev, sizeof(*axi), GFP_KERNEL);
 103         if (!axi) {
 104                 of_node_put(np);
 105                 return ERR_PTR(-ENOMEM);
 106         }
 107
 108         axi->axi_lpi_en = of_property_read_bool(np, "snps,lpi_en");
 109         axi->axi_xit_frm = of_property_read_bool(np, "snps,xit_frm");
 110         axi->axi_kbbe = of_property_read_bool(np, "snps,axi_kbbe");
 111         axi->axi_fb = of_property_read_bool(np, "snps,axi_fb");
 112         axi->axi_mb = of_property_read_bool(np, "snps,axi_mb");
 113         axi->axi_rb =  of_property_read_bool(np, "snps,axi_rb");
 114
 115         if (of_property_read_u32(np, "snps,wr_osr_lmt", &axi->axi_wr_osr_lmt))
 116                 axi->axi_wr_osr_lmt = 1;
 117         if (of_property_read_u32(np, "snps,rd_osr_lmt", &axi->axi_rd_osr_lmt))
 118                 axi->axi_rd_osr_lmt = 1;
 119         of_property_read_u32_array(np, "snps,blen", axi->axi_blen, AXI_BLEN);
 120         of_node_put(np);
 121
 122         return axi;
 123 }
 124
 125 /**
 126  * stmmac_mtl_setup - parse DT parameters for multiple queues configuration
 127  * @pdev: platform device
 128  * @plat: enet data
 129  */
 130 static int stmmac_mtl_setup(struct platform_device *pdev,
 131                             struct plat_stmmacenet_data *plat)
 132 {
 133         struct device_node *q_node;
 134         struct device_node *rx_node;
 135         struct device_node *tx_node;
 136         u8 queue = 0;
 137         int ret = 0;
 138
 139         /* For backwards-compatibility with device trees that don't have any
 140          * snps,mtl-rx-config or snps,mtl-tx-config properties, we fall back
 141          * to one RX and TX queues each.
 142          */
 143         plat->rx_queues_to_use = 1;
 144         plat->tx_queues_to_use = 1;
 145
 146         /* First Queue must always be in DCB mode. As MTL_QUEUE_DCB = 1 we need
 147          * to always set this, otherwise Queue will be classified as AVB
 148          * (because MTL_QUEUE_AVB = 0).
 149          */
 150         plat->rx_queues_cfg[0].mode_to_use = MTL_QUEUE_DCB;
 151         plat->tx_queues_cfg[0].mode_to_use = MTL_QUEUE_DCB;
 152
 153         rx_node = of_parse_phandle(pdev->dev.of_node, "snps,mtl-rx-config", 0);
 154         if (!rx_node)
 155                 return ret;
 156
 157         tx_node = of_parse_phandle(pdev->dev.of_node, "snps,mtl-tx-config", 0);
 158         if (!tx_node) {
 159                 of_node_put(rx_node);
 160                 return ret;
 161         }
 162
 163         /* Processing RX queues common config */
 164         if (of_property_read_u32(rx_node, "snps,rx-queues-to-use",
 165                                  &plat->rx_queues_to_use))
 166                 plat->rx_queues_to_use = 1;
 167
 168         if (of_property_read_bool(rx_node, "snps,rx-sched-sp"))
 169                 plat->rx_sched_algorithm = MTL_RX_ALGORITHM_SP;
 170         else if (of_property_read_bool(rx_node, "snps,rx-sched-wsp"))
 171                 plat->rx_sched_algorithm = MTL_RX_ALGORITHM_WSP;
 172         else
 173                 plat->rx_sched_algorithm = MTL_RX_ALGORITHM_SP;
 174
 175         /* Processing individual RX queue config */
 176         for_each_child_of_node(rx_node, q_node) {
 177                 if (queue >= plat->rx_queues_to_use)
 178                         break;
 179
 180                 if (of_property_read_bool(q_node, "snps,dcb-algorithm"))
 181                         plat->rx_queues_cfg[queue].mode_to_use = MTL_QUEUE_DCB;
 182                 else if (of_property_read_bool(q_node, "snps,avb-algorithm"))
 183                         plat->rx_queues_cfg[queue].mode_to_use = MTL_QUEUE_AVB;
 184                 else
 185                         plat->rx_queues_cfg[queue].mode_to_use = MTL_QUEUE_DCB;
 186
 187                 if (of_property_read_u32(q_node, "snps,map-to-dma-channel",
 188                                          &plat->rx_queues_cfg[queue].chan))
 189                         plat->rx_queues_cfg[queue].chan = queue;
 190                 /* TODO: Dynamic mapping to be included in the future */
 191
 192                 if (of_property_read_u32(q_node, "snps,priority",
 193                                         &plat->rx_queues_cfg[queue].prio)) {
 194                         plat->rx_queues_cfg[queue].prio = 0;
 195                         plat->rx_queues_cfg[queue].use_prio = false;
 196                 } else {
 197                         plat->rx_queues_cfg[queue].use_prio = true;
 198                 }
 199
 200                 /* RX queue specific packet type routing */
 201                 if (of_property_read_bool(q_node, "snps,route-avcp"))
 202                         plat->rx_queues_cfg[queue].pkt_route = PACKET_AVCPQ;
 203                 else if (of_property_read_bool(q_node, "snps,route-ptp"))
 204                         plat->rx_queues_cfg[queue].pkt_route = PACKET_PTPQ;
 205                 else if (of_property_read_bool(q_node, "snps,route-dcbcp"))
 206                         plat->rx_queues_cfg[queue].pkt_route = PACKET_DCBCPQ;
 207                 else if (of_property_read_bool(q_node, "snps,route-up"))
 208                         plat->rx_queues_cfg[queue].pkt_route = PACKET_UPQ;
 209                 else if (of_property_read_bool(q_node, "snps,route-multi-broad"))
 210                         plat->rx_queues_cfg[queue].pkt_route = PACKET_MCBCQ;
 211                 else
 212                         plat->rx_queues_cfg[queue].pkt_route = 0x0;
 213
 214                 queue++;
 215         }
 216         if (queue != plat->rx_queues_to_use) {
 217                 ret = -EINVAL;
 218                 dev_err(&pdev->dev, "Not all RX queues were configured\n");
 219                 goto out;
 220         }
 221
 222         /* Processing TX queues common config */
 223         if (of_property_read_u32(tx_node, "snps,tx-queues-to-use",
 224                                  &plat->tx_queues_to_use))
 225                 plat->tx_queues_to_use = 1;
 226
 227         if (of_property_read_bool(tx_node, "snps,tx-sched-wrr"))
 228                 plat->tx_sched_algorithm = MTL_TX_ALGORITHM_WRR;
 229         else if (of_property_read_bool(tx_node, "snps,tx-sched-wfq"))
 230                 plat->tx_sched_algorithm = MTL_TX_ALGORITHM_WFQ;
 231         else if (of_property_read_bool(tx_node, "snps,tx-sched-dwrr"))
 232                 plat->tx_sched_algorithm = MTL_TX_ALGORITHM_DWRR;
 233         else
 234                 plat->tx_sched_algorithm = MTL_TX_ALGORITHM_SP;
 235
 236         queue = 0;
 237
 238         /* Processing individual TX queue config */
 239         for_each_child_of_node(tx_node, q_node) {
 240                 if (queue >= plat->tx_queues_to_use)
 241                         break;
 242
 243                 if (of_property_read_u32(q_node, "snps,weight",
 244                                          &plat->tx_queues_cfg[queue].weight))
 245                         plat->tx_queues_cfg[queue].weight = 0x10 + queue;
 246
 247                 if (of_property_read_bool(q_node, "snps,dcb-algorithm")) {
 248                         plat->tx_queues_cfg[queue].mode_to_use = MTL_QUEUE_DCB;
 249                 } else if (of_property_read_bool(q_node,
 250                                                  "snps,avb-algorithm")) {
 251                         plat->tx_queues_cfg[queue].mode_to_use = MTL_QUEUE_AVB;
 252
 253                         /* Credit Base Shaper parameters used by AVB */
 254                         if (of_property_read_u32(q_node, "snps,send_slope",
 255                                 &plat->tx_queues_cfg[queue].send_slope))
 256                                 plat->tx_queues_cfg[queue].send_slope = 0x0;
 257                         if (of_property_read_u32(q_node, "snps,idle_slope",
 258                                 &plat->tx_queues_cfg[queue].idle_slope))
 259                                 plat->tx_queues_cfg[queue].idle_slope = 0x0;
 260                         if (of_property_read_u32(q_node, "snps,high_credit",
 261                                 &plat->tx_queues_cfg[queue].high_credit))
 262                                 plat->tx_queues_cfg[queue].high_credit = 0x0;
 263                         if (of_property_read_u32(q_node, "snps,low_credit",
 264                                 &plat->tx_queues_cfg[queue].low_credit))
 265                                 plat->tx_queues_cfg[queue].low_credit = 0x0;
 266                 } else {
 267                         plat->tx_queues_cfg[queue].mode_to_use = MTL_QUEUE_DCB;
 268                 }
 269
 270                 if (of_property_read_u32(q_node, "snps,priority",
 271                                         &plat->tx_queues_cfg[queue].prio)) {
 272                         plat->tx_queues_cfg[queue].prio = 0;
 273                         plat->tx_queues_cfg[queue].use_prio = false;
 274                 } else {
 275                         plat->tx_queues_cfg[queue].use_prio = true;
 276                 }
 277
 278                 queue++;
 279         }
 280         if (queue != plat->tx_queues_to_use) {
 281                 ret = -EINVAL;
 282                 dev_err(&pdev->dev, "Not all TX queues were configured\n");
 283                 goto out;
 284         }
 285
 286 out:
 287         of_node_put(rx_node);
 288         of_node_put(tx_node);
 289         of_node_put(q_node);
 290
 291         return ret;
 292 }
 293
 294 /**
 295  * stmmac_dt_phy - parse device-tree driver parameters to allocate PHY resources
 296  * @plat: driver data platform structure
 297  * @np: device tree node
 298  * @dev: device pointer
 299  * Description:
 300  * The mdio bus will be allocated in case of a phy transceiver is on board;
 301  * it will be NULL if the fixed-link is configured.
 302  * If there is the "snps,dwmac-mdio" sub-node the mdio will be allocated
 303  * in any case (for DSA, mdio must be registered even if fixed-link).
 304  * The table below sums the supported configurations:
 305  *      -------------------------------
 306  *      snps,phy-addr   |     Y
 307  *      -------------------------------
 308  *      phy-handle      |     Y
 309  *      -------------------------------
 310  *      fixed-link      |     N
 311  *      -------------------------------
 312  *      snps,dwmac-mdio |
 313  *        even if       |     Y
 314  *      fixed-link      |
 315  *      -------------------------------
 316  *
 317  * It returns 0 in case of success otherwise -ENODEV.
 318  */
 319 static int stmmac_dt_phy(struct plat_stmmacenet_data *plat,
 320                          struct device_node *np, struct device *dev)
 321 {
 322         bool mdio = !of_phy_is_fixed_link(np);
 323         static const struct of_device_id need_mdio_ids[] = {
 324                 { .compatible = "snps,dwc-qos-ethernet-4.10" },
 325                 {},
 326         };
 327
 328         if (of_match_node(need_mdio_ids, np)) {
 329                 plat->mdio_node = of_get_child_by_name(np, "mdio");
 330         } else {
 331                 /**
 332                  * If snps,dwmac-mdio is passed from DT, always register
 333                  * the MDIO
 334                  */
 335                 for_each_child_of_node(np, plat->mdio_node) {
 336                         if (of_device_is_compatible(plat->mdio_node,
 337                                                     "snps,dwmac-mdio"))
 338                                 break;
 339                 }
 340         }
 341
 342         if (plat->mdio_node) {
 343                 dev_dbg(dev, "Found MDIO subnode\n");
 344                 mdio = true;
 345         }
 346
 347         if (mdio) {
 348                 plat->mdio_bus_data =
 349                         devm_kzalloc(dev, sizeof(struct stmmac_mdio_bus_data),
 350                                      GFP_KERNEL);
 351                 if (!plat->mdio_bus_data)
 352                         return -ENOMEM;
 353
 354                 plat->mdio_bus_data->needs_reset = true;
 355         }
 356
 357         return 0;
 358 }
 359
 360 /**
 361  * stmmac_of_get_mac_mode - retrieves the interface of the MAC
 362  * @np: - device-tree node
 363  * Description:
 364  * Similar to `of_get_phy_mode()`, this function will retrieve (from
 365  * the device-tree) the interface mode on the MAC side. This assumes
 366  * that there is mode converter in-between the MAC & PHY
 367  * (e.g. GMII-to-RGMII).
 368  */
 369 static int stmmac_of_get_mac_mode(struct device_node *np)
 370 {
 371         const char *pm;
 372         int err, i;
 373
 374         err = of_property_read_string(np, "mac-mode", &pm);
 375         if (err < 0)
 376                 return err;
 377
 378         for (i = 0; i < PHY_INTERFACE_MODE_MAX; i++) {
 379                 if (!strcasecmp(pm, phy_modes(i)))
 380                         return i;
 381         }
 382
 383         return -ENODEV;
 384 }
 385
 386 /**
 387  * stmmac_probe_config_dt - parse device-tree driver parameters
 388  * @pdev: platform_device structure
 389  * @mac: MAC address to use
 390  * Description:
 391  * this function is to read the driver parameters from device-tree and
 392  * set some private fields that will be used by the main at runtime.
 393  */
 394 struct plat_stmmacenet_data *
 395 stmmac_probe_config_dt(struct platform_device *pdev, u8 *mac)
 396 {
 397         struct device_node *np = pdev->dev.of_node;
 398         struct plat_stmmacenet_data *plat;
 399         struct stmmac_dma_cfg *dma_cfg;
 400         int phy_mode;
 401         void *ret;
 402         int rc;
 403
 404         plat = devm_kzalloc(&pdev->dev, sizeof(*plat), GFP_KERNEL);
 405         if (!plat)
 406                 return ERR_PTR(-ENOMEM);
 407
 408         rc = of_get_mac_address(np, mac);
 409         if (rc) {
 410                 if (rc == -EPROBE_DEFER)
 411                         return ERR_PTR(rc);
 412
 413                 eth_zero_addr(mac);
 414         }
 415
 416         phy_mode = device_get_phy_mode(&pdev->dev);
 417         if (phy_mode < 0)
 418                 return ERR_PTR(phy_mode);
 419
 420         plat->phy_interface = phy_mode;
 421         plat->interface = stmmac_of_get_mac_mode(np);
 422         if (plat->interface < 0)
 423                 plat->interface = plat->phy_interface;
 424
 425         /* Some wrapper drivers still rely on phy_node. Let's save it while
 426          * they are not converted to phylink. */
 427         plat->phy_node = of_parse_phandle(np, "phy-handle", 0);
 428
 429         /* PHYLINK automatically parses the phy-handle property */
 430         plat->phylink_node = np;
 431
 432         /* Get max speed of operation from device tree */
 433         if (of_property_read_u32(np, "max-speed", &plat->max_speed))
 434                 plat->max_speed = -1;
 435
 436         plat->bus_id = of_alias_get_id(np, "ethernet");
 437         if (plat->bus_id < 0)
 438                 plat->bus_id = 0;
 439
 440         /* Default to phy auto-detection */
 441         plat->phy_addr = -1;
 442
 443         /* Default to get clk_csr from stmmac_clk_crs_set(),
 444          * or get clk_csr from device tree.
 445          */
 446         plat->clk_csr = -1;
 447         of_property_read_u32(np, "clk_csr", &plat->clk_csr);
 448
 449         /* "snps,phy-addr" is not a standard property. Mark it as deprecated
 450          * and warn of its use. Remove this when phy node support is added.
 451          */
 452         if (of_property_read_u32(np, "snps,phy-addr", &plat->phy_addr) == 0)
 453                 dev_warn(&pdev->dev, "snps,phy-addr property is deprecated\n");
 454
 455         /* To Configure PHY by using all device-tree supported properties */
 456         rc = stmmac_dt_phy(plat, np, &pdev->dev);
 457         if (rc)
 458                 return ERR_PTR(rc);
 459
 460         of_property_read_u32(np, "tx-fifo-depth", &plat->tx_fifo_size);
 461
 462         of_property_read_u32(np, "rx-fifo-depth", &plat->rx_fifo_size);
 463
 464         plat->force_sf_dma_mode =
 465                 of_property_read_bool(np, "snps,force_sf_dma_mode");
 466
 467         plat->en_tx_lpi_clockgating =
 468                 of_property_read_bool(np, "snps,en-tx-lpi-clockgating");
 469
 470         /* Set the maxmtu to a default of JUMBO_LEN in case the
 471          * parameter is not present in the device tree.
 472          */
 473         plat->maxmtu = JUMBO_LEN;
 474
 475         /* Set default value for multicast hash bins */
 476         plat->multicast_filter_bins = HASH_TABLE_SIZE;
 477
 478         /* Set default value for unicast filter entries */
 479         plat->unicast_filter_entries = 1;
 480
 481         /*
 482          * Currently only the properties needed on SPEAr600
 483          * are provided. All other properties should be added
 484          * once needed on other platforms.
 485          */
 486         if (of_device_is_compatible(np, "st,spear600-gmac") ||
 487                 of_device_is_compatible(np, "snps,dwmac-3.50a") ||
 488                 of_device_is_compatible(np, "snps,dwmac-3.70a") ||
 489                 of_device_is_compatible(np, "snps,dwmac")) {
 490                 /* Note that the max-frame-size parameter as defined in the
 491                  * ePAPR v1.1 spec is defined as max-frame-size, it's
 492                  * actually used as the IEEE definition of MAC Client
 493                  * data, or MTU. The ePAPR specification is confusing as
 494                  * the definition is max-frame-size, but usage examples
 495                  * are clearly MTUs
 496                  */
 497                 of_property_read_u32(np, "max-frame-size", &plat->maxmtu);
 498                 of_property_read_u32(np, "snps,multicast-filter-bins",
 499                                      &plat->multicast_filter_bins);
 500                 of_property_read_u32(np, "snps,perfect-filter-entries",
 501                                      &plat->unicast_filter_entries);
 502                 plat->unicast_filter_entries = dwmac1000_validate_ucast_entries(
 503                                 &pdev->dev, plat->unicast_filter_entries);
 504                 plat->multicast_filter_bins = dwmac1000_validate_mcast_bins(
 505                                 &pdev->dev, plat->multicast_filter_bins);
 506                 plat->has_gmac = 1;
 507                 plat->pmt = 1;
 508         }
 509
 510         if (of_device_is_compatible(np, "snps,dwmac-4.00") ||
 511             of_device_is_compatible(np, "snps,dwmac-4.10a") ||
 512             of_device_is_compatible(np, "snps,dwmac-4.20a") ||
 513             of_device_is_compatible(np, "snps,dwmac-5.10a")) {
 514                 plat->has_gmac4 = 1;
 515                 plat->has_gmac = 0;
 516                 plat->pmt = 1;
 517                 plat->tso_en = of_property_read_bool(np, "snps,tso");
 518         }
 519
 520         if (of_device_is_compatible(np, "snps,dwmac-3.610") ||
 521                 of_device_is_compatible(np, "snps,dwmac-3.710")) {
 522                 plat->enh_desc = 1;
 523                 plat->bugged_jumbo = 1;
 524                 plat->force_sf_dma_mode = 1;
 525         }
 526
 527         if (of_device_is_compatible(np, "snps,dwxgmac")) {
 528                 plat->has_xgmac = 1;
 529                 plat->pmt = 1;
 530                 plat->tso_en = of_property_read_bool(np, "snps,tso");
 531         }
 532
 533         dma_cfg = devm_kzalloc(&pdev->dev, sizeof(*dma_cfg),
 534                                GFP_KERNEL);
 535         if (!dma_cfg) {
 536                 stmmac_remove_config_dt(pdev, plat);
 537                 return ERR_PTR(-ENOMEM);
 538         }
 539         plat->dma_cfg = dma_cfg;
 540
 541         of_property_read_u32(np, "snps,pbl", &dma_cfg->pbl);
 542         if (!dma_cfg->pbl)
 543                 dma_cfg->pbl = DEFAULT_DMA_PBL;
 544         of_property_read_u32(np, "snps,txpbl", &dma_cfg->txpbl);
 545         of_property_read_u32(np, "snps,rxpbl", &dma_cfg->rxpbl);
 546         dma_cfg->pblx8 = !of_property_read_bool(np, "snps,no-pbl-x8");
 547
 548         dma_cfg->aal = of_property_read_bool(np, "snps,aal");
 549         dma_cfg->fixed_burst = of_property_read_bool(np, "snps,fixed-burst");
 550         dma_cfg->mixed_burst = of_property_read_bool(np, "snps,mixed-burst");
 551
 552         plat->force_thresh_dma_mode = of_property_read_bool(np, "snps,force_thresh_dma_mode");
 553         if (plat->force_thresh_dma_mode) {
 554                 plat->force_sf_dma_mode = 0;
 555                 dev_warn(&pdev->dev,
 556                          "force_sf_dma_mode is ignored if force_thresh_dma_mode is set.\n");
 557         }
 558
 559         of_property_read_u32(np, "snps,ps-speed", &plat->mac_port_sel_speed);
 560
 561         plat->axi = stmmac_axi_setup(pdev);
 562
 563         rc = stmmac_mtl_setup(pdev, plat);
 564         if (rc) {
 565                 stmmac_remove_config_dt(pdev, plat);
 566                 return ERR_PTR(rc);
 567         }
 568
 569         /* clock setup */
 570         if (!of_device_is_compatible(np, "snps,dwc-qos-ethernet-4.10")) {
 571                 plat->stmmac_clk = devm_clk_get(&pdev->dev,
 572                                                 STMMAC_RESOURCE_NAME);
 573                 if (IS_ERR(plat->stmmac_clk)) {
 574                         dev_warn(&pdev->dev, "Cannot get CSR clock\n");
 575                         plat->stmmac_clk = NULL;
 576                 }
 577                 clk_prepare_enable(plat->stmmac_clk);
 578         }
 579
 580         plat->pclk = devm_clk_get_optional(&pdev->dev, "pclk");
 581         if (IS_ERR(plat->pclk)) {
 582                 ret = plat->pclk;
 583                 goto error_pclk_get;
 584         }
 585         clk_prepare_enable(plat->pclk);
 586
 587         /* Fall-back to main clock in case of no PTP ref is passed */
 588         plat->clk_ptp_ref = devm_clk_get(&pdev->dev, "ptp_ref");
 589         if (IS_ERR(plat->clk_ptp_ref)) {
 590                 plat->clk_ptp_rate = clk_get_rate(plat->stmmac_clk);
 591                 plat->clk_ptp_ref = NULL;
 592                 dev_info(&pdev->dev, "PTP uses main clock\n");
 593         } else {
 594                 plat->clk_ptp_rate = clk_get_rate(plat->clk_ptp_ref);
 595                 dev_dbg(&pdev->dev, "PTP rate %d\n", plat->clk_ptp_rate);
 596         }
 597
 598         plat->stmmac_rst = devm_reset_control_get_optional(&pdev->dev,
 599                                                            STMMAC_RESOURCE_NAME);
 600         if (IS_ERR(plat->stmmac_rst)) {
 601                 ret = plat->stmmac_rst;
 602                 goto error_hw_init;
 603         }
 604
 605         plat->stmmac_ahb_rst = devm_reset_control_get_optional_shared(
 606                                                         &pdev->dev, "ahb");
 607         if (IS_ERR(plat->stmmac_ahb_rst)) {
 608                 ret = plat->stmmac_ahb_rst;
 609                 goto error_hw_init;
 610         }
 611
 612         return plat;
 613
 614 error_hw_init:
 615         clk_disable_unprepare(plat->pclk);
 616 error_pclk_get:
 617         clk_disable_unprepare(plat->stmmac_clk);
 618
 619         return ret;
 620 }
 621
 622 /**
 623  * stmmac_remove_config_dt - undo the effects of stmmac_probe_config_dt()
 624  * @pdev: platform_device structure
 625  * @plat: driver data platform structure
 626  *
 627  * Release resources claimed by stmmac_probe_config_dt().
 628  */
 629 void stmmac_remove_config_dt(struct platform_device *pdev,
 630                              struct plat_stmmacenet_data *plat)
 631 {
 632         clk_disable_unprepare(plat->stmmac_clk);
 633         clk_disable_unprepare(plat->pclk);
 634         of_node_put(plat->phy_node);
 635         of_node_put(plat->mdio_node);
 636 }
 637 #else
 638 struct plat_stmmacenet_data *
 639 stmmac_probe_config_dt(struct platform_device *pdev, u8 *mac)
 640 {
 641         return ERR_PTR(-EINVAL);
 642 }
 643
 644 void stmmac_remove_config_dt(struct platform_device *pdev,
 645                              struct plat_stmmacenet_data *plat)
 646 {
 647 }
 648 #endif /* CONFIG_OF */
 649 EXPORT_SYMBOL_GPL(stmmac_probe_config_dt);
 650 EXPORT_SYMBOL_GPL(stmmac_remove_config_dt);
 651
 652 int stmmac_get_platform_resources(struct platform_device *pdev,
 653                                   struct stmmac_resources *stmmac_res)
 654 {
 655         memset(stmmac_res, 0, sizeof(*stmmac_res));
 656
 657         /* Get IRQ information early to have an ability to ask for deferred
 658          * probe if needed before we went too far with resource allocation.
 659          */
 660         stmmac_res->irq = platform_get_irq_byname(pdev, "macirq");
 661         if (stmmac_res->irq < 0)
 662                 return stmmac_res->irq;
 663
 664         /* On some platforms e.g. SPEAr the wake up irq differs from the mac irq
 665          * The external wake up irq can be passed through the platform code
 666          * named as "eth_wake_irq"
 667          *
 668          * In case the wake up interrupt is not passed from the platform
 669          * so the driver will continue to use the mac irq (ndev->irq)
 670          */
 671         stmmac_res->wol_irq =
 672                 platform_get_irq_byname_optional(pdev, "eth_wake_irq");
 673         if (stmmac_res->wol_irq < 0) {
 674                 if (stmmac_res->wol_irq == -EPROBE_DEFER)
 675                         return -EPROBE_DEFER;
 676                 dev_info(&pdev->dev, "IRQ eth_wake_irq not found\n");
 677                 stmmac_res->wol_irq = stmmac_res->irq;
 678         }
 679
 680         stmmac_res->lpi_irq =
 681                 platform_get_irq_byname_optional(pdev, "eth_lpi");
 682         if (stmmac_res->lpi_irq < 0) {
 683                 if (stmmac_res->lpi_irq == -EPROBE_DEFER)
 684                         return -EPROBE_DEFER;
 685                 dev_info(&pdev->dev, "IRQ eth_lpi not found\n");
 686         }
 687
 688         stmmac_res->addr = devm_platform_ioremap_resource(pdev, 0);
 689
 690         return PTR_ERR_OR_ZERO(stmmac_res->addr);
 691 }
 692 EXPORT_SYMBOL_GPL(stmmac_get_platform_resources);
 693
 694 /**
 695  * stmmac_pltfr_remove
 696  * @pdev: platform device pointer
 697  * Description: this function calls the main to free the net resources
 698  * and calls the platforms hook and release the resources (e.g. mem).
 699  */
 700 int stmmac_pltfr_remove(struct platform_device *pdev)
 701 {
 702         struct net_device *ndev = platform_get_drvdata(pdev);
 703         struct stmmac_priv *priv = netdev_priv(ndev);
 704         struct plat_stmmacenet_data *plat = priv->plat;
 705         int ret = stmmac_dvr_remove(&pdev->dev);
 706
 707         if (plat->exit)
 708                 plat->exit(pdev, plat->bsp_priv);
 709
 710         stmmac_remove_config_dt(pdev, plat);
 711
 712         return ret;
 713 }
 714 EXPORT_SYMBOL_GPL(stmmac_pltfr_remove);
 715
 716 /**
 717  * stmmac_pltfr_suspend
 718  * @dev: device pointer
 719  * Description: this function is invoked when suspend the driver and it direcly
 720  * call the main suspend function and then, if required, on some platform, it
 721  * can call an exit helper.
 722  */
 723 static int __maybe_unused stmmac_pltfr_suspend(struct device *dev)
 724 {
 725         int ret;
 726         struct net_device *ndev = dev_get_drvdata(dev);
 727         struct stmmac_priv *priv = netdev_priv(ndev);
 728         struct platform_device *pdev = to_platform_device(dev);
 729
 730         ret = stmmac_suspend(dev);
 731         if (priv->plat->exit)
 732                 priv->plat->exit(pdev, priv->plat->bsp_priv);
 733
 734         return ret;
 735 }
 736
 737 /**
 738  * stmmac_pltfr_resume
 739  * @dev: device pointer
 740  * Description: this function is invoked when resume the driver before calling
 741  * the main resume function, on some platforms, it can call own init helper
 742  * if required.
 743  */
 744 static int __maybe_unused stmmac_pltfr_resume(struct device *dev)
 745 {
 746         struct net_device *ndev = dev_get_drvdata(dev);
 747         struct stmmac_priv *priv = netdev_priv(ndev);
 748         struct platform_device *pdev = to_platform_device(dev);
 749
 750         if (priv->plat->init)
 751                 priv->plat->init(pdev, priv->plat->bsp_priv);
 752
 753         return stmmac_resume(dev);
 754 }
 755
 756 static int __maybe_unused stmmac_runtime_suspend(struct device *dev)
 757 {
 758         struct net_device *ndev = dev_get_drvdata(dev);
 759         struct stmmac_priv *priv = netdev_priv(ndev);
 760
 761         stmmac_bus_clks_config(priv, false);
 762
 763         return 0;
 764 }
 765
 766 static int __maybe_unused stmmac_runtime_resume(struct device *dev)
 767 {
 768         struct net_device *ndev = dev_get_drvdata(dev);
 769         struct stmmac_priv *priv = netdev_priv(ndev);
 770
 771         return stmmac_bus_clks_config(priv, true);
 772 }
 773
 774 const struct dev_pm_ops stmmac_pltfr_pm_ops = {
 775         SET_SYSTEM_SLEEP_PM_OPS(stmmac_pltfr_suspend, stmmac_pltfr_resume)
 776         SET_RUNTIME_PM_OPS(stmmac_runtime_suspend, stmmac_runtime_resume, NULL)
 777 };
 778 EXPORT_SYMBOL_GPL(stmmac_pltfr_pm_ops);
 779
 780 MODULE_DESCRIPTION("STMMAC 10/100/1000 Ethernet platform support");
 781 MODULE_AUTHOR("Giuseppe Cavallaro <peppe.cavallaro@st.com>");
 782 MODULE_LICENSE("GPL");