ethernet: use eth_hw_addr_set() instead of ether_addr_copy()
[linux-2.6-microblaze.git] / drivers / net / ethernet / intel / fm10k / fm10k_pci.c
1 // SPDX-License-Identifier: GPL-2.0
2 /* Copyright(c) 2013 - 2019 Intel Corporation. */
3
4 #include <linux/module.h>
5 #include <linux/interrupt.h>
6 #include <linux/aer.h>
7
8 #include "fm10k.h"
9
10 static const struct fm10k_info *fm10k_info_tbl[] = {
11         [fm10k_device_pf] = &fm10k_pf_info,
12         [fm10k_device_vf] = &fm10k_vf_info,
13 };
14
15 /*
16  * fm10k_pci_tbl - PCI Device ID Table
17  *
18  * Wildcard entries (PCI_ANY_ID) should come last
19  * Last entry must be all 0s
20  *
21  * { Vendor ID, Device ID, SubVendor ID, SubDevice ID,
22  *   Class, Class Mask, private data (not used) }
23  */
24 static const struct pci_device_id fm10k_pci_tbl[] = {
25         { PCI_VDEVICE(INTEL, FM10K_DEV_ID_PF), fm10k_device_pf },
26         { PCI_VDEVICE(INTEL, FM10K_DEV_ID_SDI_FM10420_QDA2), fm10k_device_pf },
27         { PCI_VDEVICE(INTEL, FM10K_DEV_ID_SDI_FM10420_DA2), fm10k_device_pf },
28         { PCI_VDEVICE(INTEL, FM10K_DEV_ID_VF), fm10k_device_vf },
29         /* required last entry */
30         { 0, }
31 };
32 MODULE_DEVICE_TABLE(pci, fm10k_pci_tbl);
33
34 u16 fm10k_read_pci_cfg_word(struct fm10k_hw *hw, u32 reg)
35 {
36         struct fm10k_intfc *interface = hw->back;
37         u16 value = 0;
38
39         if (FM10K_REMOVED(hw->hw_addr))
40                 return ~value;
41
42         pci_read_config_word(interface->pdev, reg, &value);
43         if (value == 0xFFFF)
44                 fm10k_write_flush(hw);
45
46         return value;
47 }
48
49 u32 fm10k_read_reg(struct fm10k_hw *hw, int reg)
50 {
51         u32 __iomem *hw_addr = READ_ONCE(hw->hw_addr);
52         u32 value = 0;
53
54         if (FM10K_REMOVED(hw_addr))
55                 return ~value;
56
57         value = readl(&hw_addr[reg]);
58         if (!(~value) && (!reg || !(~readl(hw_addr)))) {
59                 struct fm10k_intfc *interface = hw->back;
60                 struct net_device *netdev = interface->netdev;
61
62                 hw->hw_addr = NULL;
63                 netif_device_detach(netdev);
64                 netdev_err(netdev, "PCIe link lost, device now detached\n");
65         }
66
67         return value;
68 }
69
70 static int fm10k_hw_ready(struct fm10k_intfc *interface)
71 {
72         struct fm10k_hw *hw = &interface->hw;
73
74         fm10k_write_flush(hw);
75
76         return FM10K_REMOVED(hw->hw_addr) ? -ENODEV : 0;
77 }
78
79 /**
80  * fm10k_macvlan_schedule - Schedule MAC/VLAN queue task
81  * @interface: fm10k private interface structure
82  *
83  * Schedule the MAC/VLAN queue monitor task. If the MAC/VLAN task cannot be
84  * started immediately, request that it be restarted when possible.
85  */
86 void fm10k_macvlan_schedule(struct fm10k_intfc *interface)
87 {
88         /* Avoid processing the MAC/VLAN queue when the service task is
89          * disabled, or when we're resetting the device.
90          */
91         if (!test_bit(__FM10K_MACVLAN_DISABLE, interface->state) &&
92             !test_and_set_bit(__FM10K_MACVLAN_SCHED, interface->state)) {
93                 clear_bit(__FM10K_MACVLAN_REQUEST, interface->state);
94                 /* We delay the actual start of execution in order to allow
95                  * multiple MAC/VLAN updates to accumulate before handling
96                  * them, and to allow some time to let the mailbox drain
97                  * between runs.
98                  */
99                 queue_delayed_work(fm10k_workqueue,
100                                    &interface->macvlan_task, 10);
101         } else {
102                 set_bit(__FM10K_MACVLAN_REQUEST, interface->state);
103         }
104 }
105
106 /**
107  * fm10k_stop_macvlan_task - Stop the MAC/VLAN queue monitor
108  * @interface: fm10k private interface structure
109  *
110  * Wait until the MAC/VLAN queue task has stopped, and cancel any future
111  * requests.
112  */
113 static void fm10k_stop_macvlan_task(struct fm10k_intfc *interface)
114 {
115         /* Disable the MAC/VLAN work item */
116         set_bit(__FM10K_MACVLAN_DISABLE, interface->state);
117
118         /* Make sure we waited until any current invocations have stopped */
119         cancel_delayed_work_sync(&interface->macvlan_task);
120
121         /* We set the __FM10K_MACVLAN_SCHED bit when we schedule the task.
122          * However, it may not be unset of the MAC/VLAN task never actually
123          * got a chance to run. Since we've canceled the task here, and it
124          * cannot be rescheuled right now, we need to ensure the scheduled bit
125          * gets unset.
126          */
127         clear_bit(__FM10K_MACVLAN_SCHED, interface->state);
128 }
129
130 /**
131  * fm10k_resume_macvlan_task - Restart the MAC/VLAN queue monitor
132  * @interface: fm10k private interface structure
133  *
134  * Clear the __FM10K_MACVLAN_DISABLE bit and, if a request occurred, schedule
135  * the MAC/VLAN work monitor.
136  */
137 static void fm10k_resume_macvlan_task(struct fm10k_intfc *interface)
138 {
139         /* Re-enable the MAC/VLAN work item */
140         clear_bit(__FM10K_MACVLAN_DISABLE, interface->state);
141
142         /* We might have received a MAC/VLAN request while disabled. If so,
143          * kick off the queue now.
144          */
145         if (test_bit(__FM10K_MACVLAN_REQUEST, interface->state))
146                 fm10k_macvlan_schedule(interface);
147 }
148
149 void fm10k_service_event_schedule(struct fm10k_intfc *interface)
150 {
151         if (!test_bit(__FM10K_SERVICE_DISABLE, interface->state) &&
152             !test_and_set_bit(__FM10K_SERVICE_SCHED, interface->state)) {
153                 clear_bit(__FM10K_SERVICE_REQUEST, interface->state);
154                 queue_work(fm10k_workqueue, &interface->service_task);
155         } else {
156                 set_bit(__FM10K_SERVICE_REQUEST, interface->state);
157         }
158 }
159
160 static void fm10k_service_event_complete(struct fm10k_intfc *interface)
161 {
162         WARN_ON(!test_bit(__FM10K_SERVICE_SCHED, interface->state));
163
164         /* flush memory to make sure state is correct before next watchog */
165         smp_mb__before_atomic();
166         clear_bit(__FM10K_SERVICE_SCHED, interface->state);
167
168         /* If a service event was requested since we started, immediately
169          * re-schedule now. This ensures we don't drop a request until the
170          * next timer event.
171          */
172         if (test_bit(__FM10K_SERVICE_REQUEST, interface->state))
173                 fm10k_service_event_schedule(interface);
174 }
175
176 static void fm10k_stop_service_event(struct fm10k_intfc *interface)
177 {
178         set_bit(__FM10K_SERVICE_DISABLE, interface->state);
179         cancel_work_sync(&interface->service_task);
180
181         /* It's possible that cancel_work_sync stopped the service task from
182          * running before it could actually start. In this case the
183          * __FM10K_SERVICE_SCHED bit will never be cleared. Since we know that
184          * the service task cannot be running at this point, we need to clear
185          * the scheduled bit, as otherwise the service task may never be
186          * restarted.
187          */
188         clear_bit(__FM10K_SERVICE_SCHED, interface->state);
189 }
190
191 static void fm10k_start_service_event(struct fm10k_intfc *interface)
192 {
193         clear_bit(__FM10K_SERVICE_DISABLE, interface->state);
194         fm10k_service_event_schedule(interface);
195 }
196
197 /**
198  * fm10k_service_timer - Timer Call-back
199  * @t: pointer to timer data
200  **/
201 static void fm10k_service_timer(struct timer_list *t)
202 {
203         struct fm10k_intfc *interface = from_timer(interface, t,
204                                                    service_timer);
205
206         /* Reset the timer */
207         mod_timer(&interface->service_timer, (HZ * 2) + jiffies);
208
209         fm10k_service_event_schedule(interface);
210 }
211
212 /**
213  * fm10k_prepare_for_reset - Prepare the driver and device for a pending reset
214  * @interface: fm10k private data structure
215  *
216  * This function prepares for a device reset by shutting as much down as we
217  * can. It does nothing and returns false if __FM10K_RESETTING was already set
218  * prior to calling this function. It returns true if it actually did work.
219  */
220 static bool fm10k_prepare_for_reset(struct fm10k_intfc *interface)
221 {
222         struct net_device *netdev = interface->netdev;
223
224         /* put off any impending NetWatchDogTimeout */
225         netif_trans_update(netdev);
226
227         /* Nothing to do if a reset is already in progress */
228         if (test_and_set_bit(__FM10K_RESETTING, interface->state))
229                 return false;
230
231         /* As the MAC/VLAN task will be accessing registers it must not be
232          * running while we reset. Although the task will not be scheduled
233          * once we start resetting it may already be running
234          */
235         fm10k_stop_macvlan_task(interface);
236
237         rtnl_lock();
238
239         fm10k_iov_suspend(interface->pdev);
240
241         if (netif_running(netdev))
242                 fm10k_close(netdev);
243
244         fm10k_mbx_free_irq(interface);
245
246         /* free interrupts */
247         fm10k_clear_queueing_scheme(interface);
248
249         /* delay any future reset requests */
250         interface->last_reset = jiffies + (10 * HZ);
251
252         rtnl_unlock();
253
254         return true;
255 }
256
257 static int fm10k_handle_reset(struct fm10k_intfc *interface)
258 {
259         struct net_device *netdev = interface->netdev;
260         struct fm10k_hw *hw = &interface->hw;
261         int err;
262
263         WARN_ON(!test_bit(__FM10K_RESETTING, interface->state));
264
265         rtnl_lock();
266
267         pci_set_master(interface->pdev);
268
269         /* reset and initialize the hardware so it is in a known state */
270         err = hw->mac.ops.reset_hw(hw);
271         if (err) {
272                 dev_err(&interface->pdev->dev, "reset_hw failed: %d\n", err);
273                 goto reinit_err;
274         }
275
276         err = hw->mac.ops.init_hw(hw);
277         if (err) {
278                 dev_err(&interface->pdev->dev, "init_hw failed: %d\n", err);
279                 goto reinit_err;
280         }
281
282         err = fm10k_init_queueing_scheme(interface);
283         if (err) {
284                 dev_err(&interface->pdev->dev,
285                         "init_queueing_scheme failed: %d\n", err);
286                 goto reinit_err;
287         }
288
289         /* re-associate interrupts */
290         err = fm10k_mbx_request_irq(interface);
291         if (err)
292                 goto err_mbx_irq;
293
294         err = fm10k_hw_ready(interface);
295         if (err)
296                 goto err_open;
297
298         /* update hardware address for VFs if perm_addr has changed */
299         if (hw->mac.type == fm10k_mac_vf) {
300                 if (is_valid_ether_addr(hw->mac.perm_addr)) {
301                         ether_addr_copy(hw->mac.addr, hw->mac.perm_addr);
302                         ether_addr_copy(netdev->perm_addr, hw->mac.perm_addr);
303                         eth_hw_addr_set(netdev, hw->mac.perm_addr);
304                         netdev->addr_assign_type &= ~NET_ADDR_RANDOM;
305                 }
306
307                 if (hw->mac.vlan_override)
308                         netdev->features &= ~NETIF_F_HW_VLAN_CTAG_RX;
309                 else
310                         netdev->features |= NETIF_F_HW_VLAN_CTAG_RX;
311         }
312
313         err = netif_running(netdev) ? fm10k_open(netdev) : 0;
314         if (err)
315                 goto err_open;
316
317         fm10k_iov_resume(interface->pdev);
318
319         rtnl_unlock();
320
321         fm10k_resume_macvlan_task(interface);
322
323         clear_bit(__FM10K_RESETTING, interface->state);
324
325         return err;
326 err_open:
327         fm10k_mbx_free_irq(interface);
328 err_mbx_irq:
329         fm10k_clear_queueing_scheme(interface);
330 reinit_err:
331         netif_device_detach(netdev);
332
333         rtnl_unlock();
334
335         clear_bit(__FM10K_RESETTING, interface->state);
336
337         return err;
338 }
339
340 static void fm10k_detach_subtask(struct fm10k_intfc *interface)
341 {
342         struct net_device *netdev = interface->netdev;
343         u32 __iomem *hw_addr;
344         u32 value;
345
346         /* do nothing if netdev is still present or hw_addr is set */
347         if (netif_device_present(netdev) || interface->hw.hw_addr)
348                 return;
349
350         /* We've lost the PCIe register space, and can no longer access the
351          * device. Shut everything except the detach subtask down and prepare
352          * to reset the device in case we recover. If we actually prepare for
353          * reset, indicate that we're detached.
354          */
355         if (fm10k_prepare_for_reset(interface))
356                 set_bit(__FM10K_RESET_DETACHED, interface->state);
357
358         /* check the real address space to see if we've recovered */
359         hw_addr = READ_ONCE(interface->uc_addr);
360         value = readl(hw_addr);
361         if (~value) {
362                 int err;
363
364                 /* Make sure the reset was initiated because we detached,
365                  * otherwise we might race with a different reset flow.
366                  */
367                 if (!test_and_clear_bit(__FM10K_RESET_DETACHED,
368                                         interface->state))
369                         return;
370
371                 /* Restore the hardware address */
372                 interface->hw.hw_addr = interface->uc_addr;
373
374                 /* PCIe link has been restored, and the device is active
375                  * again. Restore everything and reset the device.
376                  */
377                 err = fm10k_handle_reset(interface);
378                 if (err) {
379                         netdev_err(netdev, "Unable to reset device: %d\n", err);
380                         interface->hw.hw_addr = NULL;
381                         return;
382                 }
383
384                 /* Re-attach the netdev */
385                 netif_device_attach(netdev);
386                 netdev_warn(netdev, "PCIe link restored, device now attached\n");
387                 return;
388         }
389 }
390
391 static void fm10k_reset_subtask(struct fm10k_intfc *interface)
392 {
393         int err;
394
395         if (!test_and_clear_bit(FM10K_FLAG_RESET_REQUESTED,
396                                 interface->flags))
397                 return;
398
399         /* If another thread has already prepared to reset the device, we
400          * should not attempt to handle a reset here, since we'd race with
401          * that thread. This may happen if we suspend the device or if the
402          * PCIe link is lost. In this case, we'll just ignore the RESET
403          * request, as it will (eventually) be taken care of when the thread
404          * which actually started the reset is finished.
405          */
406         if (!fm10k_prepare_for_reset(interface))
407                 return;
408
409         netdev_err(interface->netdev, "Reset interface\n");
410
411         err = fm10k_handle_reset(interface);
412         if (err)
413                 dev_err(&interface->pdev->dev,
414                         "fm10k_handle_reset failed: %d\n", err);
415 }
416
417 /**
418  * fm10k_configure_swpri_map - Configure Receive SWPRI to PC mapping
419  * @interface: board private structure
420  *
421  * Configure the SWPRI to PC mapping for the port.
422  **/
423 static void fm10k_configure_swpri_map(struct fm10k_intfc *interface)
424 {
425         struct net_device *netdev = interface->netdev;
426         struct fm10k_hw *hw = &interface->hw;
427         int i;
428
429         /* clear flag indicating update is needed */
430         clear_bit(FM10K_FLAG_SWPRI_CONFIG, interface->flags);
431
432         /* these registers are only available on the PF */
433         if (hw->mac.type != fm10k_mac_pf)
434                 return;
435
436         /* configure SWPRI to PC map */
437         for (i = 0; i < FM10K_SWPRI_MAX; i++)
438                 fm10k_write_reg(hw, FM10K_SWPRI_MAP(i),
439                                 netdev_get_prio_tc_map(netdev, i));
440 }
441
442 /**
443  * fm10k_watchdog_update_host_state - Update the link status based on host.
444  * @interface: board private structure
445  **/
446 static void fm10k_watchdog_update_host_state(struct fm10k_intfc *interface)
447 {
448         struct fm10k_hw *hw = &interface->hw;
449         s32 err;
450
451         if (test_bit(__FM10K_LINK_DOWN, interface->state)) {
452                 interface->host_ready = false;
453                 if (time_is_after_jiffies(interface->link_down_event))
454                         return;
455                 clear_bit(__FM10K_LINK_DOWN, interface->state);
456         }
457
458         if (test_bit(FM10K_FLAG_SWPRI_CONFIG, interface->flags)) {
459                 if (rtnl_trylock()) {
460                         fm10k_configure_swpri_map(interface);
461                         rtnl_unlock();
462                 }
463         }
464
465         /* lock the mailbox for transmit and receive */
466         fm10k_mbx_lock(interface);
467
468         err = hw->mac.ops.get_host_state(hw, &interface->host_ready);
469         if (err && time_is_before_jiffies(interface->last_reset))
470                 set_bit(FM10K_FLAG_RESET_REQUESTED, interface->flags);
471
472         /* free the lock */
473         fm10k_mbx_unlock(interface);
474 }
475
476 /**
477  * fm10k_mbx_subtask - Process upstream and downstream mailboxes
478  * @interface: board private structure
479  *
480  * This function will process both the upstream and downstream mailboxes.
481  **/
482 static void fm10k_mbx_subtask(struct fm10k_intfc *interface)
483 {
484         /* If we're resetting, bail out */
485         if (test_bit(__FM10K_RESETTING, interface->state))
486                 return;
487
488         /* process upstream mailbox and update device state */
489         fm10k_watchdog_update_host_state(interface);
490
491         /* process downstream mailboxes */
492         fm10k_iov_mbx(interface);
493 }
494
495 /**
496  * fm10k_watchdog_host_is_ready - Update netdev status based on host ready
497  * @interface: board private structure
498  **/
499 static void fm10k_watchdog_host_is_ready(struct fm10k_intfc *interface)
500 {
501         struct net_device *netdev = interface->netdev;
502
503         /* only continue if link state is currently down */
504         if (netif_carrier_ok(netdev))
505                 return;
506
507         netif_info(interface, drv, netdev, "NIC Link is up\n");
508
509         netif_carrier_on(netdev);
510         netif_tx_wake_all_queues(netdev);
511 }
512
513 /**
514  * fm10k_watchdog_host_not_ready - Update netdev status based on host not ready
515  * @interface: board private structure
516  **/
517 static void fm10k_watchdog_host_not_ready(struct fm10k_intfc *interface)
518 {
519         struct net_device *netdev = interface->netdev;
520
521         /* only continue if link state is currently up */
522         if (!netif_carrier_ok(netdev))
523                 return;
524
525         netif_info(interface, drv, netdev, "NIC Link is down\n");
526
527         netif_carrier_off(netdev);
528         netif_tx_stop_all_queues(netdev);
529 }
530
531 /**
532  * fm10k_update_stats - Update the board statistics counters.
533  * @interface: board private structure
534  **/
535 void fm10k_update_stats(struct fm10k_intfc *interface)
536 {
537         struct net_device_stats *net_stats = &interface->netdev->stats;
538         struct fm10k_hw *hw = &interface->hw;
539         u64 hw_csum_tx_good = 0, hw_csum_rx_good = 0, rx_length_errors = 0;
540         u64 rx_switch_errors = 0, rx_drops = 0, rx_pp_errors = 0;
541         u64 rx_link_errors = 0;
542         u64 rx_errors = 0, rx_csum_errors = 0, tx_csum_errors = 0;
543         u64 restart_queue = 0, tx_busy = 0, alloc_failed = 0;
544         u64 rx_bytes_nic = 0, rx_pkts_nic = 0, rx_drops_nic = 0;
545         u64 tx_bytes_nic = 0, tx_pkts_nic = 0;
546         u64 bytes, pkts;
547         int i;
548
549         /* ensure only one thread updates stats at a time */
550         if (test_and_set_bit(__FM10K_UPDATING_STATS, interface->state))
551                 return;
552
553         /* do not allow stats update via service task for next second */
554         interface->next_stats_update = jiffies + HZ;
555
556         /* gather some stats to the interface struct that are per queue */
557         for (bytes = 0, pkts = 0, i = 0; i < interface->num_tx_queues; i++) {
558                 struct fm10k_ring *tx_ring = READ_ONCE(interface->tx_ring[i]);
559
560                 if (!tx_ring)
561                         continue;
562
563                 restart_queue += tx_ring->tx_stats.restart_queue;
564                 tx_busy += tx_ring->tx_stats.tx_busy;
565                 tx_csum_errors += tx_ring->tx_stats.csum_err;
566                 bytes += tx_ring->stats.bytes;
567                 pkts += tx_ring->stats.packets;
568                 hw_csum_tx_good += tx_ring->tx_stats.csum_good;
569         }
570
571         interface->restart_queue = restart_queue;
572         interface->tx_busy = tx_busy;
573         net_stats->tx_bytes = bytes;
574         net_stats->tx_packets = pkts;
575         interface->tx_csum_errors = tx_csum_errors;
576         interface->hw_csum_tx_good = hw_csum_tx_good;
577
578         /* gather some stats to the interface struct that are per queue */
579         for (bytes = 0, pkts = 0, i = 0; i < interface->num_rx_queues; i++) {
580                 struct fm10k_ring *rx_ring = READ_ONCE(interface->rx_ring[i]);
581
582                 if (!rx_ring)
583                         continue;
584
585                 bytes += rx_ring->stats.bytes;
586                 pkts += rx_ring->stats.packets;
587                 alloc_failed += rx_ring->rx_stats.alloc_failed;
588                 rx_csum_errors += rx_ring->rx_stats.csum_err;
589                 rx_errors += rx_ring->rx_stats.errors;
590                 hw_csum_rx_good += rx_ring->rx_stats.csum_good;
591                 rx_switch_errors += rx_ring->rx_stats.switch_errors;
592                 rx_drops += rx_ring->rx_stats.drops;
593                 rx_pp_errors += rx_ring->rx_stats.pp_errors;
594                 rx_link_errors += rx_ring->rx_stats.link_errors;
595                 rx_length_errors += rx_ring->rx_stats.length_errors;
596         }
597
598         net_stats->rx_bytes = bytes;
599         net_stats->rx_packets = pkts;
600         interface->alloc_failed = alloc_failed;
601         interface->rx_csum_errors = rx_csum_errors;
602         interface->hw_csum_rx_good = hw_csum_rx_good;
603         interface->rx_switch_errors = rx_switch_errors;
604         interface->rx_drops = rx_drops;
605         interface->rx_pp_errors = rx_pp_errors;
606         interface->rx_link_errors = rx_link_errors;
607         interface->rx_length_errors = rx_length_errors;
608
609         hw->mac.ops.update_hw_stats(hw, &interface->stats);
610
611         for (i = 0; i < hw->mac.max_queues; i++) {
612                 struct fm10k_hw_stats_q *q = &interface->stats.q[i];
613
614                 tx_bytes_nic += q->tx_bytes.count;
615                 tx_pkts_nic += q->tx_packets.count;
616                 rx_bytes_nic += q->rx_bytes.count;
617                 rx_pkts_nic += q->rx_packets.count;
618                 rx_drops_nic += q->rx_drops.count;
619         }
620
621         interface->tx_bytes_nic = tx_bytes_nic;
622         interface->tx_packets_nic = tx_pkts_nic;
623         interface->rx_bytes_nic = rx_bytes_nic;
624         interface->rx_packets_nic = rx_pkts_nic;
625         interface->rx_drops_nic = rx_drops_nic;
626
627         /* Fill out the OS statistics structure */
628         net_stats->rx_errors = rx_errors;
629         net_stats->rx_dropped = interface->stats.nodesc_drop.count;
630
631         /* Update VF statistics */
632         fm10k_iov_update_stats(interface);
633
634         clear_bit(__FM10K_UPDATING_STATS, interface->state);
635 }
636
637 /**
638  * fm10k_watchdog_flush_tx - flush queues on host not ready
639  * @interface: pointer to the device interface structure
640  **/
641 static void fm10k_watchdog_flush_tx(struct fm10k_intfc *interface)
642 {
643         int some_tx_pending = 0;
644         int i;
645
646         /* nothing to do if carrier is up */
647         if (netif_carrier_ok(interface->netdev))
648                 return;
649
650         for (i = 0; i < interface->num_tx_queues; i++) {
651                 struct fm10k_ring *tx_ring = interface->tx_ring[i];
652
653                 if (tx_ring->next_to_use != tx_ring->next_to_clean) {
654                         some_tx_pending = 1;
655                         break;
656                 }
657         }
658
659         /* We've lost link, so the controller stops DMA, but we've got
660          * queued Tx work that's never going to get done, so reset
661          * controller to flush Tx.
662          */
663         if (some_tx_pending)
664                 set_bit(FM10K_FLAG_RESET_REQUESTED, interface->flags);
665 }
666
667 /**
668  * fm10k_watchdog_subtask - check and bring link up
669  * @interface: pointer to the device interface structure
670  **/
671 static void fm10k_watchdog_subtask(struct fm10k_intfc *interface)
672 {
673         /* if interface is down do nothing */
674         if (test_bit(__FM10K_DOWN, interface->state) ||
675             test_bit(__FM10K_RESETTING, interface->state))
676                 return;
677
678         if (interface->host_ready)
679                 fm10k_watchdog_host_is_ready(interface);
680         else
681                 fm10k_watchdog_host_not_ready(interface);
682
683         /* update stats only once every second */
684         if (time_is_before_jiffies(interface->next_stats_update))
685                 fm10k_update_stats(interface);
686
687         /* flush any uncompleted work */
688         fm10k_watchdog_flush_tx(interface);
689 }
690
691 /**
692  * fm10k_check_hang_subtask - check for hung queues and dropped interrupts
693  * @interface: pointer to the device interface structure
694  *
695  * This function serves two purposes.  First it strobes the interrupt lines
696  * in order to make certain interrupts are occurring.  Secondly it sets the
697  * bits needed to check for TX hangs.  As a result we should immediately
698  * determine if a hang has occurred.
699  */
700 static void fm10k_check_hang_subtask(struct fm10k_intfc *interface)
701 {
702         /* If we're down or resetting, just bail */
703         if (test_bit(__FM10K_DOWN, interface->state) ||
704             test_bit(__FM10K_RESETTING, interface->state))
705                 return;
706
707         /* rate limit tx hang checks to only once every 2 seconds */
708         if (time_is_after_eq_jiffies(interface->next_tx_hang_check))
709                 return;
710         interface->next_tx_hang_check = jiffies + (2 * HZ);
711
712         if (netif_carrier_ok(interface->netdev)) {
713                 int i;
714
715                 /* Force detection of hung controller */
716                 for (i = 0; i < interface->num_tx_queues; i++)
717                         set_check_for_tx_hang(interface->tx_ring[i]);
718
719                 /* Rearm all in-use q_vectors for immediate firing */
720                 for (i = 0; i < interface->num_q_vectors; i++) {
721                         struct fm10k_q_vector *qv = interface->q_vector[i];
722
723                         if (!qv->tx.count && !qv->rx.count)
724                                 continue;
725                         writel(FM10K_ITR_ENABLE | FM10K_ITR_PENDING2, qv->itr);
726                 }
727         }
728 }
729
730 /**
731  * fm10k_service_task - manages and runs subtasks
732  * @work: pointer to work_struct containing our data
733  **/
734 static void fm10k_service_task(struct work_struct *work)
735 {
736         struct fm10k_intfc *interface;
737
738         interface = container_of(work, struct fm10k_intfc, service_task);
739
740         /* Check whether we're detached first */
741         fm10k_detach_subtask(interface);
742
743         /* tasks run even when interface is down */
744         fm10k_mbx_subtask(interface);
745         fm10k_reset_subtask(interface);
746
747         /* tasks only run when interface is up */
748         fm10k_watchdog_subtask(interface);
749         fm10k_check_hang_subtask(interface);
750
751         /* release lock on service events to allow scheduling next event */
752         fm10k_service_event_complete(interface);
753 }
754
755 /**
756  * fm10k_macvlan_task - send queued MAC/VLAN requests to switch manager
757  * @work: pointer to work_struct containing our data
758  *
759  * This work item handles sending MAC/VLAN updates to the switch manager. When
760  * the interface is up, it will attempt to queue mailbox messages to the
761  * switch manager requesting updates for MAC/VLAN pairs. If the Tx fifo of the
762  * mailbox is full, it will reschedule itself to try again in a short while.
763  * This ensures that the driver does not overload the switch mailbox with too
764  * many simultaneous requests, causing an unnecessary reset.
765  **/
766 static void fm10k_macvlan_task(struct work_struct *work)
767 {
768         struct fm10k_macvlan_request *item;
769         struct fm10k_intfc *interface;
770         struct delayed_work *dwork;
771         struct list_head *requests;
772         struct fm10k_hw *hw;
773         unsigned long flags;
774
775         dwork = to_delayed_work(work);
776         interface = container_of(dwork, struct fm10k_intfc, macvlan_task);
777         hw = &interface->hw;
778         requests = &interface->macvlan_requests;
779
780         do {
781                 /* Pop the first item off the list */
782                 spin_lock_irqsave(&interface->macvlan_lock, flags);
783                 item = list_first_entry_or_null(requests,
784                                                 struct fm10k_macvlan_request,
785                                                 list);
786                 if (item)
787                         list_del_init(&item->list);
788
789                 spin_unlock_irqrestore(&interface->macvlan_lock, flags);
790
791                 /* We have no more items to process */
792                 if (!item)
793                         goto done;
794
795                 fm10k_mbx_lock(interface);
796
797                 /* Check that we have plenty of space to send the message. We
798                  * want to ensure that the mailbox stays low enough to avoid a
799                  * change in the host state, otherwise we may see spurious
800                  * link up / link down notifications.
801                  */
802                 if (!hw->mbx.ops.tx_ready(&hw->mbx, FM10K_VFMBX_MSG_MTU + 5)) {
803                         hw->mbx.ops.process(hw, &hw->mbx);
804                         set_bit(__FM10K_MACVLAN_REQUEST, interface->state);
805                         fm10k_mbx_unlock(interface);
806
807                         /* Put the request back on the list */
808                         spin_lock_irqsave(&interface->macvlan_lock, flags);
809                         list_add(&item->list, requests);
810                         spin_unlock_irqrestore(&interface->macvlan_lock, flags);
811                         break;
812                 }
813
814                 switch (item->type) {
815                 case FM10K_MC_MAC_REQUEST:
816                         hw->mac.ops.update_mc_addr(hw,
817                                                    item->mac.glort,
818                                                    item->mac.addr,
819                                                    item->mac.vid,
820                                                    item->set);
821                         break;
822                 case FM10K_UC_MAC_REQUEST:
823                         hw->mac.ops.update_uc_addr(hw,
824                                                    item->mac.glort,
825                                                    item->mac.addr,
826                                                    item->mac.vid,
827                                                    item->set,
828                                                    0);
829                         break;
830                 case FM10K_VLAN_REQUEST:
831                         hw->mac.ops.update_vlan(hw,
832                                                 item->vlan.vid,
833                                                 item->vlan.vsi,
834                                                 item->set);
835                         break;
836                 default:
837                         break;
838                 }
839
840                 fm10k_mbx_unlock(interface);
841
842                 /* Free the item now that we've sent the update */
843                 kfree(item);
844         } while (true);
845
846 done:
847         WARN_ON(!test_bit(__FM10K_MACVLAN_SCHED, interface->state));
848
849         /* flush memory to make sure state is correct */
850         smp_mb__before_atomic();
851         clear_bit(__FM10K_MACVLAN_SCHED, interface->state);
852
853         /* If a MAC/VLAN request was scheduled since we started, we should
854          * re-schedule. However, there is no reason to re-schedule if there is
855          * no work to do.
856          */
857         if (test_bit(__FM10K_MACVLAN_REQUEST, interface->state))
858                 fm10k_macvlan_schedule(interface);
859 }
860
861 /**
862  * fm10k_configure_tx_ring - Configure Tx ring after Reset
863  * @interface: board private structure
864  * @ring: structure containing ring specific data
865  *
866  * Configure the Tx descriptor ring after a reset.
867  **/
868 static void fm10k_configure_tx_ring(struct fm10k_intfc *interface,
869                                     struct fm10k_ring *ring)
870 {
871         struct fm10k_hw *hw = &interface->hw;
872         u64 tdba = ring->dma;
873         u32 size = ring->count * sizeof(struct fm10k_tx_desc);
874         u32 txint = FM10K_INT_MAP_DISABLE;
875         u32 txdctl = BIT(FM10K_TXDCTL_MAX_TIME_SHIFT) | FM10K_TXDCTL_ENABLE;
876         u8 reg_idx = ring->reg_idx;
877
878         /* disable queue to avoid issues while updating state */
879         fm10k_write_reg(hw, FM10K_TXDCTL(reg_idx), 0);
880         fm10k_write_flush(hw);
881
882         /* possible poll here to verify ring resources have been cleaned */
883
884         /* set location and size for descriptor ring */
885         fm10k_write_reg(hw, FM10K_TDBAL(reg_idx), tdba & DMA_BIT_MASK(32));
886         fm10k_write_reg(hw, FM10K_TDBAH(reg_idx), tdba >> 32);
887         fm10k_write_reg(hw, FM10K_TDLEN(reg_idx), size);
888
889         /* reset head and tail pointers */
890         fm10k_write_reg(hw, FM10K_TDH(reg_idx), 0);
891         fm10k_write_reg(hw, FM10K_TDT(reg_idx), 0);
892
893         /* store tail pointer */
894         ring->tail = &interface->uc_addr[FM10K_TDT(reg_idx)];
895
896         /* reset ntu and ntc to place SW in sync with hardware */
897         ring->next_to_clean = 0;
898         ring->next_to_use = 0;
899
900         /* Map interrupt */
901         if (ring->q_vector) {
902                 txint = ring->q_vector->v_idx + NON_Q_VECTORS;
903                 txint |= FM10K_INT_MAP_TIMER0;
904         }
905
906         fm10k_write_reg(hw, FM10K_TXINT(reg_idx), txint);
907
908         /* enable use of FTAG bit in Tx descriptor, register is RO for VF */
909         fm10k_write_reg(hw, FM10K_PFVTCTL(reg_idx),
910                         FM10K_PFVTCTL_FTAG_DESC_ENABLE);
911
912         /* Initialize XPS */
913         if (!test_and_set_bit(__FM10K_TX_XPS_INIT_DONE, ring->state) &&
914             ring->q_vector)
915                 netif_set_xps_queue(ring->netdev,
916                                     &ring->q_vector->affinity_mask,
917                                     ring->queue_index);
918
919         /* enable queue */
920         fm10k_write_reg(hw, FM10K_TXDCTL(reg_idx), txdctl);
921 }
922
923 /**
924  * fm10k_enable_tx_ring - Verify Tx ring is enabled after configuration
925  * @interface: board private structure
926  * @ring: structure containing ring specific data
927  *
928  * Verify the Tx descriptor ring is ready for transmit.
929  **/
930 static void fm10k_enable_tx_ring(struct fm10k_intfc *interface,
931                                  struct fm10k_ring *ring)
932 {
933         struct fm10k_hw *hw = &interface->hw;
934         int wait_loop = 10;
935         u32 txdctl;
936         u8 reg_idx = ring->reg_idx;
937
938         /* if we are already enabled just exit */
939         if (fm10k_read_reg(hw, FM10K_TXDCTL(reg_idx)) & FM10K_TXDCTL_ENABLE)
940                 return;
941
942         /* poll to verify queue is enabled */
943         do {
944                 usleep_range(1000, 2000);
945                 txdctl = fm10k_read_reg(hw, FM10K_TXDCTL(reg_idx));
946         } while (!(txdctl & FM10K_TXDCTL_ENABLE) && --wait_loop);
947         if (!wait_loop)
948                 netif_err(interface, drv, interface->netdev,
949                           "Could not enable Tx Queue %d\n", reg_idx);
950 }
951
952 /**
953  * fm10k_configure_tx - Configure Transmit Unit after Reset
954  * @interface: board private structure
955  *
956  * Configure the Tx unit of the MAC after a reset.
957  **/
958 static void fm10k_configure_tx(struct fm10k_intfc *interface)
959 {
960         int i;
961
962         /* Setup the HW Tx Head and Tail descriptor pointers */
963         for (i = 0; i < interface->num_tx_queues; i++)
964                 fm10k_configure_tx_ring(interface, interface->tx_ring[i]);
965
966         /* poll here to verify that Tx rings are now enabled */
967         for (i = 0; i < interface->num_tx_queues; i++)
968                 fm10k_enable_tx_ring(interface, interface->tx_ring[i]);
969 }
970
971 /**
972  * fm10k_configure_rx_ring - Configure Rx ring after Reset
973  * @interface: board private structure
974  * @ring: structure containing ring specific data
975  *
976  * Configure the Rx descriptor ring after a reset.
977  **/
978 static void fm10k_configure_rx_ring(struct fm10k_intfc *interface,
979                                     struct fm10k_ring *ring)
980 {
981         u64 rdba = ring->dma;
982         struct fm10k_hw *hw = &interface->hw;
983         u32 size = ring->count * sizeof(union fm10k_rx_desc);
984         u32 rxqctl, rxdctl = FM10K_RXDCTL_WRITE_BACK_MIN_DELAY;
985         u32 srrctl = FM10K_SRRCTL_BUFFER_CHAINING_EN;
986         u32 rxint = FM10K_INT_MAP_DISABLE;
987         u8 rx_pause = interface->rx_pause;
988         u8 reg_idx = ring->reg_idx;
989
990         /* disable queue to avoid issues while updating state */
991         rxqctl = fm10k_read_reg(hw, FM10K_RXQCTL(reg_idx));
992         rxqctl &= ~FM10K_RXQCTL_ENABLE;
993         fm10k_write_reg(hw, FM10K_RXQCTL(reg_idx), rxqctl);
994         fm10k_write_flush(hw);
995
996         /* possible poll here to verify ring resources have been cleaned */
997
998         /* set location and size for descriptor ring */
999         fm10k_write_reg(hw, FM10K_RDBAL(reg_idx), rdba & DMA_BIT_MASK(32));
1000         fm10k_write_reg(hw, FM10K_RDBAH(reg_idx), rdba >> 32);
1001         fm10k_write_reg(hw, FM10K_RDLEN(reg_idx), size);
1002
1003         /* reset head and tail pointers */
1004         fm10k_write_reg(hw, FM10K_RDH(reg_idx), 0);
1005         fm10k_write_reg(hw, FM10K_RDT(reg_idx), 0);
1006
1007         /* store tail pointer */
1008         ring->tail = &interface->uc_addr[FM10K_RDT(reg_idx)];
1009
1010         /* reset ntu and ntc to place SW in sync with hardware */
1011         ring->next_to_clean = 0;
1012         ring->next_to_use = 0;
1013         ring->next_to_alloc = 0;
1014
1015         /* Configure the Rx buffer size for one buff without split */
1016         srrctl |= FM10K_RX_BUFSZ >> FM10K_SRRCTL_BSIZEPKT_SHIFT;
1017
1018         /* Configure the Rx ring to suppress loopback packets */
1019         srrctl |= FM10K_SRRCTL_LOOPBACK_SUPPRESS;
1020         fm10k_write_reg(hw, FM10K_SRRCTL(reg_idx), srrctl);
1021
1022         /* Enable drop on empty */
1023 #ifdef CONFIG_DCB
1024         if (interface->pfc_en)
1025                 rx_pause = interface->pfc_en;
1026 #endif
1027         if (!(rx_pause & BIT(ring->qos_pc)))
1028                 rxdctl |= FM10K_RXDCTL_DROP_ON_EMPTY;
1029
1030         fm10k_write_reg(hw, FM10K_RXDCTL(reg_idx), rxdctl);
1031
1032         /* assign default VLAN to queue */
1033         ring->vid = hw->mac.default_vid;
1034
1035         /* if we have an active VLAN, disable default VLAN ID */
1036         if (test_bit(hw->mac.default_vid, interface->active_vlans))
1037                 ring->vid |= FM10K_VLAN_CLEAR;
1038
1039         /* Map interrupt */
1040         if (ring->q_vector) {
1041                 rxint = ring->q_vector->v_idx + NON_Q_VECTORS;
1042                 rxint |= FM10K_INT_MAP_TIMER1;
1043         }
1044
1045         fm10k_write_reg(hw, FM10K_RXINT(reg_idx), rxint);
1046
1047         /* enable queue */
1048         rxqctl = fm10k_read_reg(hw, FM10K_RXQCTL(reg_idx));
1049         rxqctl |= FM10K_RXQCTL_ENABLE;
1050         fm10k_write_reg(hw, FM10K_RXQCTL(reg_idx), rxqctl);
1051
1052         /* place buffers on ring for receive data */
1053         fm10k_alloc_rx_buffers(ring, fm10k_desc_unused(ring));
1054 }
1055
1056 /**
1057  * fm10k_update_rx_drop_en - Configures the drop enable bits for Rx rings
1058  * @interface: board private structure
1059  *
1060  * Configure the drop enable bits for the Rx rings.
1061  **/
1062 void fm10k_update_rx_drop_en(struct fm10k_intfc *interface)
1063 {
1064         struct fm10k_hw *hw = &interface->hw;
1065         u8 rx_pause = interface->rx_pause;
1066         int i;
1067
1068 #ifdef CONFIG_DCB
1069         if (interface->pfc_en)
1070                 rx_pause = interface->pfc_en;
1071
1072 #endif
1073         for (i = 0; i < interface->num_rx_queues; i++) {
1074                 struct fm10k_ring *ring = interface->rx_ring[i];
1075                 u32 rxdctl = FM10K_RXDCTL_WRITE_BACK_MIN_DELAY;
1076                 u8 reg_idx = ring->reg_idx;
1077
1078                 if (!(rx_pause & BIT(ring->qos_pc)))
1079                         rxdctl |= FM10K_RXDCTL_DROP_ON_EMPTY;
1080
1081                 fm10k_write_reg(hw, FM10K_RXDCTL(reg_idx), rxdctl);
1082         }
1083 }
1084
1085 /**
1086  * fm10k_configure_dglort - Configure Receive DGLORT after reset
1087  * @interface: board private structure
1088  *
1089  * Configure the DGLORT description and RSS tables.
1090  **/
1091 static void fm10k_configure_dglort(struct fm10k_intfc *interface)
1092 {
1093         struct fm10k_dglort_cfg dglort = { 0 };
1094         struct fm10k_hw *hw = &interface->hw;
1095         int i;
1096         u32 mrqc;
1097
1098         /* Fill out hash function seeds */
1099         for (i = 0; i < FM10K_RSSRK_SIZE; i++)
1100                 fm10k_write_reg(hw, FM10K_RSSRK(0, i), interface->rssrk[i]);
1101
1102         /* Write RETA table to hardware */
1103         for (i = 0; i < FM10K_RETA_SIZE; i++)
1104                 fm10k_write_reg(hw, FM10K_RETA(0, i), interface->reta[i]);
1105
1106         /* Generate RSS hash based on packet types, TCP/UDP
1107          * port numbers and/or IPv4/v6 src and dst addresses
1108          */
1109         mrqc = FM10K_MRQC_IPV4 |
1110                FM10K_MRQC_TCP_IPV4 |
1111                FM10K_MRQC_IPV6 |
1112                FM10K_MRQC_TCP_IPV6;
1113
1114         if (test_bit(FM10K_FLAG_RSS_FIELD_IPV4_UDP, interface->flags))
1115                 mrqc |= FM10K_MRQC_UDP_IPV4;
1116         if (test_bit(FM10K_FLAG_RSS_FIELD_IPV6_UDP, interface->flags))
1117                 mrqc |= FM10K_MRQC_UDP_IPV6;
1118
1119         fm10k_write_reg(hw, FM10K_MRQC(0), mrqc);
1120
1121         /* configure default DGLORT mapping for RSS/DCB */
1122         dglort.inner_rss = 1;
1123         dglort.rss_l = fls(interface->ring_feature[RING_F_RSS].mask);
1124         dglort.pc_l = fls(interface->ring_feature[RING_F_QOS].mask);
1125         hw->mac.ops.configure_dglort_map(hw, &dglort);
1126
1127         /* assign GLORT per queue for queue mapped testing */
1128         if (interface->glort_count > 64) {
1129                 memset(&dglort, 0, sizeof(dglort));
1130                 dglort.inner_rss = 1;
1131                 dglort.glort = interface->glort + 64;
1132                 dglort.idx = fm10k_dglort_pf_queue;
1133                 dglort.queue_l = fls(interface->num_rx_queues - 1);
1134                 hw->mac.ops.configure_dglort_map(hw, &dglort);
1135         }
1136
1137         /* assign glort value for RSS/DCB specific to this interface */
1138         memset(&dglort, 0, sizeof(dglort));
1139         dglort.inner_rss = 1;
1140         dglort.glort = interface->glort;
1141         dglort.rss_l = fls(interface->ring_feature[RING_F_RSS].mask);
1142         dglort.pc_l = fls(interface->ring_feature[RING_F_QOS].mask);
1143         /* configure DGLORT mapping for RSS/DCB */
1144         dglort.idx = fm10k_dglort_pf_rss;
1145         if (interface->l2_accel)
1146                 dglort.shared_l = fls(interface->l2_accel->size);
1147         hw->mac.ops.configure_dglort_map(hw, &dglort);
1148 }
1149
1150 /**
1151  * fm10k_configure_rx - Configure Receive Unit after Reset
1152  * @interface: board private structure
1153  *
1154  * Configure the Rx unit of the MAC after a reset.
1155  **/
1156 static void fm10k_configure_rx(struct fm10k_intfc *interface)
1157 {
1158         int i;
1159
1160         /* Configure SWPRI to PC map */
1161         fm10k_configure_swpri_map(interface);
1162
1163         /* Configure RSS and DGLORT map */
1164         fm10k_configure_dglort(interface);
1165
1166         /* Setup the HW Rx Head and Tail descriptor pointers */
1167         for (i = 0; i < interface->num_rx_queues; i++)
1168                 fm10k_configure_rx_ring(interface, interface->rx_ring[i]);
1169
1170         /* possible poll here to verify that Rx rings are now enabled */
1171 }
1172
1173 static void fm10k_napi_enable_all(struct fm10k_intfc *interface)
1174 {
1175         struct fm10k_q_vector *q_vector;
1176         int q_idx;
1177
1178         for (q_idx = 0; q_idx < interface->num_q_vectors; q_idx++) {
1179                 q_vector = interface->q_vector[q_idx];
1180                 napi_enable(&q_vector->napi);
1181         }
1182 }
1183
1184 static irqreturn_t fm10k_msix_clean_rings(int __always_unused irq, void *data)
1185 {
1186         struct fm10k_q_vector *q_vector = data;
1187
1188         if (q_vector->rx.count || q_vector->tx.count)
1189                 napi_schedule_irqoff(&q_vector->napi);
1190
1191         return IRQ_HANDLED;
1192 }
1193
1194 static irqreturn_t fm10k_msix_mbx_vf(int __always_unused irq, void *data)
1195 {
1196         struct fm10k_intfc *interface = data;
1197         struct fm10k_hw *hw = &interface->hw;
1198         struct fm10k_mbx_info *mbx = &hw->mbx;
1199
1200         /* re-enable mailbox interrupt and indicate 20us delay */
1201         fm10k_write_reg(hw, FM10K_VFITR(FM10K_MBX_VECTOR),
1202                         (FM10K_MBX_INT_DELAY >> hw->mac.itr_scale) |
1203                         FM10K_ITR_ENABLE);
1204
1205         /* service upstream mailbox */
1206         if (fm10k_mbx_trylock(interface)) {
1207                 mbx->ops.process(hw, mbx);
1208                 fm10k_mbx_unlock(interface);
1209         }
1210
1211         hw->mac.get_host_state = true;
1212         fm10k_service_event_schedule(interface);
1213
1214         return IRQ_HANDLED;
1215 }
1216
1217 #define FM10K_ERR_MSG(type) case (type): error = #type; break
1218 static void fm10k_handle_fault(struct fm10k_intfc *interface, int type,
1219                                struct fm10k_fault *fault)
1220 {
1221         struct pci_dev *pdev = interface->pdev;
1222         struct fm10k_hw *hw = &interface->hw;
1223         struct fm10k_iov_data *iov_data = interface->iov_data;
1224         char *error;
1225
1226         switch (type) {
1227         case FM10K_PCA_FAULT:
1228                 switch (fault->type) {
1229                 default:
1230                         error = "Unknown PCA error";
1231                         break;
1232                 FM10K_ERR_MSG(PCA_NO_FAULT);
1233                 FM10K_ERR_MSG(PCA_UNMAPPED_ADDR);
1234                 FM10K_ERR_MSG(PCA_BAD_QACCESS_PF);
1235                 FM10K_ERR_MSG(PCA_BAD_QACCESS_VF);
1236                 FM10K_ERR_MSG(PCA_MALICIOUS_REQ);
1237                 FM10K_ERR_MSG(PCA_POISONED_TLP);
1238                 FM10K_ERR_MSG(PCA_TLP_ABORT);
1239                 }
1240                 break;
1241         case FM10K_THI_FAULT:
1242                 switch (fault->type) {
1243                 default:
1244                         error = "Unknown THI error";
1245                         break;
1246                 FM10K_ERR_MSG(THI_NO_FAULT);
1247                 FM10K_ERR_MSG(THI_MAL_DIS_Q_FAULT);
1248                 }
1249                 break;
1250         case FM10K_FUM_FAULT:
1251                 switch (fault->type) {
1252                 default:
1253                         error = "Unknown FUM error";
1254                         break;
1255                 FM10K_ERR_MSG(FUM_NO_FAULT);
1256                 FM10K_ERR_MSG(FUM_UNMAPPED_ADDR);
1257                 FM10K_ERR_MSG(FUM_BAD_VF_QACCESS);
1258                 FM10K_ERR_MSG(FUM_ADD_DECODE_ERR);
1259                 FM10K_ERR_MSG(FUM_RO_ERROR);
1260                 FM10K_ERR_MSG(FUM_QPRC_CRC_ERROR);
1261                 FM10K_ERR_MSG(FUM_CSR_TIMEOUT);
1262                 FM10K_ERR_MSG(FUM_INVALID_TYPE);
1263                 FM10K_ERR_MSG(FUM_INVALID_LENGTH);
1264                 FM10K_ERR_MSG(FUM_INVALID_BE);
1265                 FM10K_ERR_MSG(FUM_INVALID_ALIGN);
1266                 }
1267                 break;
1268         default:
1269                 error = "Undocumented fault";
1270                 break;
1271         }
1272
1273         dev_warn(&pdev->dev,
1274                  "%s Address: 0x%llx SpecInfo: 0x%x Func: %02x.%0x\n",
1275                  error, fault->address, fault->specinfo,
1276                  PCI_SLOT(fault->func), PCI_FUNC(fault->func));
1277
1278         /* For VF faults, clear out the respective LPORT, reset the queue
1279          * resources, and then reconnect to the mailbox. This allows the
1280          * VF in question to resume behavior. For transient faults that are
1281          * the result of non-malicious behavior this will log the fault and
1282          * allow the VF to resume functionality. Obviously for malicious VFs
1283          * they will be able to attempt malicious behavior again. In this
1284          * case, the system administrator will need to step in and manually
1285          * remove or disable the VF in question.
1286          */
1287         if (fault->func && iov_data) {
1288                 int vf = fault->func - 1;
1289                 struct fm10k_vf_info *vf_info = &iov_data->vf_info[vf];
1290
1291                 hw->iov.ops.reset_lport(hw, vf_info);
1292                 hw->iov.ops.reset_resources(hw, vf_info);
1293
1294                 /* reset_lport disables the VF, so re-enable it */
1295                 hw->iov.ops.set_lport(hw, vf_info, vf,
1296                                       FM10K_VF_FLAG_MULTI_CAPABLE);
1297
1298                 /* reset_resources will disconnect from the mbx  */
1299                 vf_info->mbx.ops.connect(hw, &vf_info->mbx);
1300         }
1301 }
1302
1303 static void fm10k_report_fault(struct fm10k_intfc *interface, u32 eicr)
1304 {
1305         struct fm10k_hw *hw = &interface->hw;
1306         struct fm10k_fault fault = { 0 };
1307         int type, err;
1308
1309         for (eicr &= FM10K_EICR_FAULT_MASK, type = FM10K_PCA_FAULT;
1310              eicr;
1311              eicr >>= 1, type += FM10K_FAULT_SIZE) {
1312                 /* only check if there is an error reported */
1313                 if (!(eicr & 0x1))
1314                         continue;
1315
1316                 /* retrieve fault info */
1317                 err = hw->mac.ops.get_fault(hw, type, &fault);
1318                 if (err) {
1319                         dev_err(&interface->pdev->dev,
1320                                 "error reading fault\n");
1321                         continue;
1322                 }
1323
1324                 fm10k_handle_fault(interface, type, &fault);
1325         }
1326 }
1327
1328 static void fm10k_reset_drop_on_empty(struct fm10k_intfc *interface, u32 eicr)
1329 {
1330         struct fm10k_hw *hw = &interface->hw;
1331         const u32 rxdctl = FM10K_RXDCTL_WRITE_BACK_MIN_DELAY;
1332         u32 maxholdq;
1333         int q;
1334
1335         if (!(eicr & FM10K_EICR_MAXHOLDTIME))
1336                 return;
1337
1338         maxholdq = fm10k_read_reg(hw, FM10K_MAXHOLDQ(7));
1339         if (maxholdq)
1340                 fm10k_write_reg(hw, FM10K_MAXHOLDQ(7), maxholdq);
1341         for (q = 255;;) {
1342                 if (maxholdq & BIT(31)) {
1343                         if (q < FM10K_MAX_QUEUES_PF) {
1344                                 interface->rx_overrun_pf++;
1345                                 fm10k_write_reg(hw, FM10K_RXDCTL(q), rxdctl);
1346                         } else {
1347                                 interface->rx_overrun_vf++;
1348                         }
1349                 }
1350
1351                 maxholdq *= 2;
1352                 if (!maxholdq)
1353                         q &= ~(32 - 1);
1354
1355                 if (!q)
1356                         break;
1357
1358                 if (q-- % 32)
1359                         continue;
1360
1361                 maxholdq = fm10k_read_reg(hw, FM10K_MAXHOLDQ(q / 32));
1362                 if (maxholdq)
1363                         fm10k_write_reg(hw, FM10K_MAXHOLDQ(q / 32), maxholdq);
1364         }
1365 }
1366
1367 static irqreturn_t fm10k_msix_mbx_pf(int __always_unused irq, void *data)
1368 {
1369         struct fm10k_intfc *interface = data;
1370         struct fm10k_hw *hw = &interface->hw;
1371         struct fm10k_mbx_info *mbx = &hw->mbx;
1372         u32 eicr;
1373
1374         /* unmask any set bits related to this interrupt */
1375         eicr = fm10k_read_reg(hw, FM10K_EICR);
1376         fm10k_write_reg(hw, FM10K_EICR, eicr & (FM10K_EICR_MAILBOX |
1377                                                 FM10K_EICR_SWITCHREADY |
1378                                                 FM10K_EICR_SWITCHNOTREADY));
1379
1380         /* report any faults found to the message log */
1381         fm10k_report_fault(interface, eicr);
1382
1383         /* reset any queues disabled due to receiver overrun */
1384         fm10k_reset_drop_on_empty(interface, eicr);
1385
1386         /* service mailboxes */
1387         if (fm10k_mbx_trylock(interface)) {
1388                 s32 err = mbx->ops.process(hw, mbx);
1389
1390                 if (err == FM10K_ERR_RESET_REQUESTED)
1391                         set_bit(FM10K_FLAG_RESET_REQUESTED, interface->flags);
1392
1393                 /* handle VFLRE events */
1394                 fm10k_iov_event(interface);
1395                 fm10k_mbx_unlock(interface);
1396         }
1397
1398         /* if switch toggled state we should reset GLORTs */
1399         if (eicr & FM10K_EICR_SWITCHNOTREADY) {
1400                 /* force link down for at least 4 seconds */
1401                 interface->link_down_event = jiffies + (4 * HZ);
1402                 set_bit(__FM10K_LINK_DOWN, interface->state);
1403
1404                 /* reset dglort_map back to no config */
1405                 hw->mac.dglort_map = FM10K_DGLORTMAP_NONE;
1406         }
1407
1408         /* we should validate host state after interrupt event */
1409         hw->mac.get_host_state = true;
1410
1411         /* validate host state, and handle VF mailboxes in the service task */
1412         fm10k_service_event_schedule(interface);
1413
1414         /* re-enable mailbox interrupt and indicate 20us delay */
1415         fm10k_write_reg(hw, FM10K_ITR(FM10K_MBX_VECTOR),
1416                         (FM10K_MBX_INT_DELAY >> hw->mac.itr_scale) |
1417                         FM10K_ITR_ENABLE);
1418
1419         return IRQ_HANDLED;
1420 }
1421
1422 void fm10k_mbx_free_irq(struct fm10k_intfc *interface)
1423 {
1424         struct fm10k_hw *hw = &interface->hw;
1425         struct msix_entry *entry;
1426         int itr_reg;
1427
1428         /* no mailbox IRQ to free if MSI-X is not enabled */
1429         if (!interface->msix_entries)
1430                 return;
1431
1432         entry = &interface->msix_entries[FM10K_MBX_VECTOR];
1433
1434         /* disconnect the mailbox */
1435         hw->mbx.ops.disconnect(hw, &hw->mbx);
1436
1437         /* disable Mailbox cause */
1438         if (hw->mac.type == fm10k_mac_pf) {
1439                 fm10k_write_reg(hw, FM10K_EIMR,
1440                                 FM10K_EIMR_DISABLE(PCA_FAULT) |
1441                                 FM10K_EIMR_DISABLE(FUM_FAULT) |
1442                                 FM10K_EIMR_DISABLE(MAILBOX) |
1443                                 FM10K_EIMR_DISABLE(SWITCHREADY) |
1444                                 FM10K_EIMR_DISABLE(SWITCHNOTREADY) |
1445                                 FM10K_EIMR_DISABLE(SRAMERROR) |
1446                                 FM10K_EIMR_DISABLE(VFLR) |
1447                                 FM10K_EIMR_DISABLE(MAXHOLDTIME));
1448                 itr_reg = FM10K_ITR(FM10K_MBX_VECTOR);
1449         } else {
1450                 itr_reg = FM10K_VFITR(FM10K_MBX_VECTOR);
1451         }
1452
1453         fm10k_write_reg(hw, itr_reg, FM10K_ITR_MASK_SET);
1454
1455         free_irq(entry->vector, interface);
1456 }
1457
1458 static s32 fm10k_mbx_mac_addr(struct fm10k_hw *hw, u32 **results,
1459                               struct fm10k_mbx_info *mbx)
1460 {
1461         bool vlan_override = hw->mac.vlan_override;
1462         u16 default_vid = hw->mac.default_vid;
1463         struct fm10k_intfc *interface;
1464         s32 err;
1465
1466         err = fm10k_msg_mac_vlan_vf(hw, results, mbx);
1467         if (err)
1468                 return err;
1469
1470         interface = container_of(hw, struct fm10k_intfc, hw);
1471
1472         /* MAC was changed so we need reset */
1473         if (is_valid_ether_addr(hw->mac.perm_addr) &&
1474             !ether_addr_equal(hw->mac.perm_addr, hw->mac.addr))
1475                 set_bit(FM10K_FLAG_RESET_REQUESTED, interface->flags);
1476
1477         /* VLAN override was changed, or default VLAN changed */
1478         if ((vlan_override != hw->mac.vlan_override) ||
1479             (default_vid != hw->mac.default_vid))
1480                 set_bit(FM10K_FLAG_RESET_REQUESTED, interface->flags);
1481
1482         return 0;
1483 }
1484
1485 /* generic error handler for mailbox issues */
1486 static s32 fm10k_mbx_error(struct fm10k_hw *hw, u32 **results,
1487                            struct fm10k_mbx_info __always_unused *mbx)
1488 {
1489         struct fm10k_intfc *interface;
1490         struct pci_dev *pdev;
1491
1492         interface = container_of(hw, struct fm10k_intfc, hw);
1493         pdev = interface->pdev;
1494
1495         dev_err(&pdev->dev, "Unknown message ID %u\n",
1496                 **results & FM10K_TLV_ID_MASK);
1497
1498         return 0;
1499 }
1500
1501 static const struct fm10k_msg_data vf_mbx_data[] = {
1502         FM10K_TLV_MSG_TEST_HANDLER(fm10k_tlv_msg_test),
1503         FM10K_VF_MSG_MAC_VLAN_HANDLER(fm10k_mbx_mac_addr),
1504         FM10K_VF_MSG_LPORT_STATE_HANDLER(fm10k_msg_lport_state_vf),
1505         FM10K_TLV_MSG_ERROR_HANDLER(fm10k_mbx_error),
1506 };
1507
1508 static int fm10k_mbx_request_irq_vf(struct fm10k_intfc *interface)
1509 {
1510         struct msix_entry *entry = &interface->msix_entries[FM10K_MBX_VECTOR];
1511         struct net_device *dev = interface->netdev;
1512         struct fm10k_hw *hw = &interface->hw;
1513         int err;
1514
1515         /* Use timer0 for interrupt moderation on the mailbox */
1516         u32 itr = entry->entry | FM10K_INT_MAP_TIMER0;
1517
1518         /* register mailbox handlers */
1519         err = hw->mbx.ops.register_handlers(&hw->mbx, vf_mbx_data);
1520         if (err)
1521                 return err;
1522
1523         /* request the IRQ */
1524         err = request_irq(entry->vector, fm10k_msix_mbx_vf, 0,
1525                           dev->name, interface);
1526         if (err) {
1527                 netif_err(interface, probe, dev,
1528                           "request_irq for msix_mbx failed: %d\n", err);
1529                 return err;
1530         }
1531
1532         /* map all of the interrupt sources */
1533         fm10k_write_reg(hw, FM10K_VFINT_MAP, itr);
1534
1535         /* enable interrupt */
1536         fm10k_write_reg(hw, FM10K_VFITR(entry->entry), FM10K_ITR_ENABLE);
1537
1538         return 0;
1539 }
1540
1541 static s32 fm10k_lport_map(struct fm10k_hw *hw, u32 **results,
1542                            struct fm10k_mbx_info *mbx)
1543 {
1544         struct fm10k_intfc *interface;
1545         u32 dglort_map = hw->mac.dglort_map;
1546         s32 err;
1547
1548         interface = container_of(hw, struct fm10k_intfc, hw);
1549
1550         err = fm10k_msg_err_pf(hw, results, mbx);
1551         if (!err && hw->swapi.status) {
1552                 /* force link down for a reasonable delay */
1553                 interface->link_down_event = jiffies + (2 * HZ);
1554                 set_bit(__FM10K_LINK_DOWN, interface->state);
1555
1556                 /* reset dglort_map back to no config */
1557                 hw->mac.dglort_map = FM10K_DGLORTMAP_NONE;
1558
1559                 fm10k_service_event_schedule(interface);
1560
1561                 /* prevent overloading kernel message buffer */
1562                 if (interface->lport_map_failed)
1563                         return 0;
1564
1565                 interface->lport_map_failed = true;
1566
1567                 if (hw->swapi.status == FM10K_MSG_ERR_PEP_NOT_SCHEDULED)
1568                         dev_warn(&interface->pdev->dev,
1569                                  "cannot obtain link because the host interface is configured for a PCIe host interface bandwidth of zero\n");
1570                 dev_warn(&interface->pdev->dev,
1571                          "request logical port map failed: %d\n",
1572                          hw->swapi.status);
1573
1574                 return 0;
1575         }
1576
1577         err = fm10k_msg_lport_map_pf(hw, results, mbx);
1578         if (err)
1579                 return err;
1580
1581         interface->lport_map_failed = false;
1582
1583         /* we need to reset if port count was just updated */
1584         if (dglort_map != hw->mac.dglort_map)
1585                 set_bit(FM10K_FLAG_RESET_REQUESTED, interface->flags);
1586
1587         return 0;
1588 }
1589
1590 static s32 fm10k_update_pvid(struct fm10k_hw *hw, u32 **results,
1591                              struct fm10k_mbx_info __always_unused *mbx)
1592 {
1593         struct fm10k_intfc *interface;
1594         u16 glort, pvid;
1595         u32 pvid_update;
1596         s32 err;
1597
1598         err = fm10k_tlv_attr_get_u32(results[FM10K_PF_ATTR_ID_UPDATE_PVID],
1599                                      &pvid_update);
1600         if (err)
1601                 return err;
1602
1603         /* extract values from the pvid update */
1604         glort = FM10K_MSG_HDR_FIELD_GET(pvid_update, UPDATE_PVID_GLORT);
1605         pvid = FM10K_MSG_HDR_FIELD_GET(pvid_update, UPDATE_PVID_PVID);
1606
1607         /* if glort is not valid return error */
1608         if (!fm10k_glort_valid_pf(hw, glort))
1609                 return FM10K_ERR_PARAM;
1610
1611         /* verify VLAN ID is valid */
1612         if (pvid >= FM10K_VLAN_TABLE_VID_MAX)
1613                 return FM10K_ERR_PARAM;
1614
1615         interface = container_of(hw, struct fm10k_intfc, hw);
1616
1617         /* check to see if this belongs to one of the VFs */
1618         err = fm10k_iov_update_pvid(interface, glort, pvid);
1619         if (!err)
1620                 return 0;
1621
1622         /* we need to reset if default VLAN was just updated */
1623         if (pvid != hw->mac.default_vid)
1624                 set_bit(FM10K_FLAG_RESET_REQUESTED, interface->flags);
1625
1626         hw->mac.default_vid = pvid;
1627
1628         return 0;
1629 }
1630
1631 static const struct fm10k_msg_data pf_mbx_data[] = {
1632         FM10K_PF_MSG_ERR_HANDLER(XCAST_MODES, fm10k_msg_err_pf),
1633         FM10K_PF_MSG_ERR_HANDLER(UPDATE_MAC_FWD_RULE, fm10k_msg_err_pf),
1634         FM10K_PF_MSG_LPORT_MAP_HANDLER(fm10k_lport_map),
1635         FM10K_PF_MSG_ERR_HANDLER(LPORT_CREATE, fm10k_msg_err_pf),
1636         FM10K_PF_MSG_ERR_HANDLER(LPORT_DELETE, fm10k_msg_err_pf),
1637         FM10K_PF_MSG_UPDATE_PVID_HANDLER(fm10k_update_pvid),
1638         FM10K_TLV_MSG_ERROR_HANDLER(fm10k_mbx_error),
1639 };
1640
1641 static int fm10k_mbx_request_irq_pf(struct fm10k_intfc *interface)
1642 {
1643         struct msix_entry *entry = &interface->msix_entries[FM10K_MBX_VECTOR];
1644         struct net_device *dev = interface->netdev;
1645         struct fm10k_hw *hw = &interface->hw;
1646         int err;
1647
1648         /* Use timer0 for interrupt moderation on the mailbox */
1649         u32 mbx_itr = entry->entry | FM10K_INT_MAP_TIMER0;
1650         u32 other_itr = entry->entry | FM10K_INT_MAP_IMMEDIATE;
1651
1652         /* register mailbox handlers */
1653         err = hw->mbx.ops.register_handlers(&hw->mbx, pf_mbx_data);
1654         if (err)
1655                 return err;
1656
1657         /* request the IRQ */
1658         err = request_irq(entry->vector, fm10k_msix_mbx_pf, 0,
1659                           dev->name, interface);
1660         if (err) {
1661                 netif_err(interface, probe, dev,
1662                           "request_irq for msix_mbx failed: %d\n", err);
1663                 return err;
1664         }
1665
1666         /* Enable interrupts w/ no moderation for "other" interrupts */
1667         fm10k_write_reg(hw, FM10K_INT_MAP(fm10k_int_pcie_fault), other_itr);
1668         fm10k_write_reg(hw, FM10K_INT_MAP(fm10k_int_switch_up_down), other_itr);
1669         fm10k_write_reg(hw, FM10K_INT_MAP(fm10k_int_sram), other_itr);
1670         fm10k_write_reg(hw, FM10K_INT_MAP(fm10k_int_max_hold_time), other_itr);
1671         fm10k_write_reg(hw, FM10K_INT_MAP(fm10k_int_vflr), other_itr);
1672
1673         /* Enable interrupts w/ moderation for mailbox */
1674         fm10k_write_reg(hw, FM10K_INT_MAP(fm10k_int_mailbox), mbx_itr);
1675
1676         /* Enable individual interrupt causes */
1677         fm10k_write_reg(hw, FM10K_EIMR, FM10K_EIMR_ENABLE(PCA_FAULT) |
1678                                         FM10K_EIMR_ENABLE(FUM_FAULT) |
1679                                         FM10K_EIMR_ENABLE(MAILBOX) |
1680                                         FM10K_EIMR_ENABLE(SWITCHREADY) |
1681                                         FM10K_EIMR_ENABLE(SWITCHNOTREADY) |
1682                                         FM10K_EIMR_ENABLE(SRAMERROR) |
1683                                         FM10K_EIMR_ENABLE(VFLR) |
1684                                         FM10K_EIMR_ENABLE(MAXHOLDTIME));
1685
1686         /* enable interrupt */
1687         fm10k_write_reg(hw, FM10K_ITR(entry->entry), FM10K_ITR_ENABLE);
1688
1689         return 0;
1690 }
1691
1692 int fm10k_mbx_request_irq(struct fm10k_intfc *interface)
1693 {
1694         struct fm10k_hw *hw = &interface->hw;
1695         int err;
1696
1697         /* enable Mailbox cause */
1698         if (hw->mac.type == fm10k_mac_pf)
1699                 err = fm10k_mbx_request_irq_pf(interface);
1700         else
1701                 err = fm10k_mbx_request_irq_vf(interface);
1702         if (err)
1703                 return err;
1704
1705         /* connect mailbox */
1706         err = hw->mbx.ops.connect(hw, &hw->mbx);
1707
1708         /* if the mailbox failed to connect, then free IRQ */
1709         if (err)
1710                 fm10k_mbx_free_irq(interface);
1711
1712         return err;
1713 }
1714
1715 /**
1716  * fm10k_qv_free_irq - release interrupts associated with queue vectors
1717  * @interface: board private structure
1718  *
1719  * Release all interrupts associated with this interface
1720  **/
1721 void fm10k_qv_free_irq(struct fm10k_intfc *interface)
1722 {
1723         int vector = interface->num_q_vectors;
1724         struct msix_entry *entry;
1725
1726         entry = &interface->msix_entries[NON_Q_VECTORS + vector];
1727
1728         while (vector) {
1729                 struct fm10k_q_vector *q_vector;
1730
1731                 vector--;
1732                 entry--;
1733                 q_vector = interface->q_vector[vector];
1734
1735                 if (!q_vector->tx.count && !q_vector->rx.count)
1736                         continue;
1737
1738                 /* clear the affinity_mask in the IRQ descriptor */
1739                 irq_set_affinity_hint(entry->vector, NULL);
1740
1741                 /* disable interrupts */
1742                 writel(FM10K_ITR_MASK_SET, q_vector->itr);
1743
1744                 free_irq(entry->vector, q_vector);
1745         }
1746 }
1747
1748 /**
1749  * fm10k_qv_request_irq - initialize interrupts for queue vectors
1750  * @interface: board private structure
1751  *
1752  * Attempts to configure interrupts using the best available
1753  * capabilities of the hardware and kernel.
1754  **/
1755 int fm10k_qv_request_irq(struct fm10k_intfc *interface)
1756 {
1757         struct net_device *dev = interface->netdev;
1758         struct fm10k_hw *hw = &interface->hw;
1759         struct msix_entry *entry;
1760         unsigned int ri = 0, ti = 0;
1761         int vector, err;
1762
1763         entry = &interface->msix_entries[NON_Q_VECTORS];
1764
1765         for (vector = 0; vector < interface->num_q_vectors; vector++) {
1766                 struct fm10k_q_vector *q_vector = interface->q_vector[vector];
1767
1768                 /* name the vector */
1769                 if (q_vector->tx.count && q_vector->rx.count) {
1770                         snprintf(q_vector->name, sizeof(q_vector->name),
1771                                  "%s-TxRx-%u", dev->name, ri++);
1772                         ti++;
1773                 } else if (q_vector->rx.count) {
1774                         snprintf(q_vector->name, sizeof(q_vector->name),
1775                                  "%s-rx-%u", dev->name, ri++);
1776                 } else if (q_vector->tx.count) {
1777                         snprintf(q_vector->name, sizeof(q_vector->name),
1778                                  "%s-tx-%u", dev->name, ti++);
1779                 } else {
1780                         /* skip this unused q_vector */
1781                         continue;
1782                 }
1783
1784                 /* Assign ITR register to q_vector */
1785                 q_vector->itr = (hw->mac.type == fm10k_mac_pf) ?
1786                                 &interface->uc_addr[FM10K_ITR(entry->entry)] :
1787                                 &interface->uc_addr[FM10K_VFITR(entry->entry)];
1788
1789                 /* request the IRQ */
1790                 err = request_irq(entry->vector, &fm10k_msix_clean_rings, 0,
1791                                   q_vector->name, q_vector);
1792                 if (err) {
1793                         netif_err(interface, probe, dev,
1794                                   "request_irq failed for MSIX interrupt Error: %d\n",
1795                                   err);
1796                         goto err_out;
1797                 }
1798
1799                 /* assign the mask for this irq */
1800                 irq_set_affinity_hint(entry->vector, &q_vector->affinity_mask);
1801
1802                 /* Enable q_vector */
1803                 writel(FM10K_ITR_ENABLE, q_vector->itr);
1804
1805                 entry++;
1806         }
1807
1808         return 0;
1809
1810 err_out:
1811         /* wind through the ring freeing all entries and vectors */
1812         while (vector) {
1813                 struct fm10k_q_vector *q_vector;
1814
1815                 entry--;
1816                 vector--;
1817                 q_vector = interface->q_vector[vector];
1818
1819                 if (!q_vector->tx.count && !q_vector->rx.count)
1820                         continue;
1821
1822                 /* clear the affinity_mask in the IRQ descriptor */
1823                 irq_set_affinity_hint(entry->vector, NULL);
1824
1825                 /* disable interrupts */
1826                 writel(FM10K_ITR_MASK_SET, q_vector->itr);
1827
1828                 free_irq(entry->vector, q_vector);
1829         }
1830
1831         return err;
1832 }
1833
1834 void fm10k_up(struct fm10k_intfc *interface)
1835 {
1836         struct fm10k_hw *hw = &interface->hw;
1837
1838         /* Enable Tx/Rx DMA */
1839         hw->mac.ops.start_hw(hw);
1840
1841         /* configure Tx descriptor rings */
1842         fm10k_configure_tx(interface);
1843
1844         /* configure Rx descriptor rings */
1845         fm10k_configure_rx(interface);
1846
1847         /* configure interrupts */
1848         hw->mac.ops.update_int_moderator(hw);
1849
1850         /* enable statistics capture again */
1851         clear_bit(__FM10K_UPDATING_STATS, interface->state);
1852
1853         /* clear down bit to indicate we are ready to go */
1854         clear_bit(__FM10K_DOWN, interface->state);
1855
1856         /* enable polling cleanups */
1857         fm10k_napi_enable_all(interface);
1858
1859         /* re-establish Rx filters */
1860         fm10k_restore_rx_state(interface);
1861
1862         /* enable transmits */
1863         netif_tx_start_all_queues(interface->netdev);
1864
1865         /* kick off the service timer now */
1866         hw->mac.get_host_state = true;
1867         mod_timer(&interface->service_timer, jiffies);
1868 }
1869
1870 static void fm10k_napi_disable_all(struct fm10k_intfc *interface)
1871 {
1872         struct fm10k_q_vector *q_vector;
1873         int q_idx;
1874
1875         for (q_idx = 0; q_idx < interface->num_q_vectors; q_idx++) {
1876                 q_vector = interface->q_vector[q_idx];
1877                 napi_disable(&q_vector->napi);
1878         }
1879 }
1880
1881 void fm10k_down(struct fm10k_intfc *interface)
1882 {
1883         struct net_device *netdev = interface->netdev;
1884         struct fm10k_hw *hw = &interface->hw;
1885         int err, i = 0, count = 0;
1886
1887         /* signal that we are down to the interrupt handler and service task */
1888         if (test_and_set_bit(__FM10K_DOWN, interface->state))
1889                 return;
1890
1891         /* call carrier off first to avoid false dev_watchdog timeouts */
1892         netif_carrier_off(netdev);
1893
1894         /* disable transmits */
1895         netif_tx_stop_all_queues(netdev);
1896         netif_tx_disable(netdev);
1897
1898         /* reset Rx filters */
1899         fm10k_reset_rx_state(interface);
1900
1901         /* disable polling routines */
1902         fm10k_napi_disable_all(interface);
1903
1904         /* capture stats one last time before stopping interface */
1905         fm10k_update_stats(interface);
1906
1907         /* prevent updating statistics while we're down */
1908         while (test_and_set_bit(__FM10K_UPDATING_STATS, interface->state))
1909                 usleep_range(1000, 2000);
1910
1911         /* skip waiting for TX DMA if we lost PCIe link */
1912         if (FM10K_REMOVED(hw->hw_addr))
1913                 goto skip_tx_dma_drain;
1914
1915         /* In some rare circumstances it can take a while for Tx queues to
1916          * quiesce and be fully disabled. Attempt to .stop_hw() first, and
1917          * then if we get ERR_REQUESTS_PENDING, go ahead and wait in a loop
1918          * until the Tx queues have emptied, or until a number of retries. If
1919          * we fail to clear within the retry loop, we will issue a warning
1920          * indicating that Tx DMA is probably hung. Note this means we call
1921          * .stop_hw() twice but this shouldn't cause any problems.
1922          */
1923         err = hw->mac.ops.stop_hw(hw);
1924         if (err != FM10K_ERR_REQUESTS_PENDING)
1925                 goto skip_tx_dma_drain;
1926
1927 #define TX_DMA_DRAIN_RETRIES 25
1928         for (count = 0; count < TX_DMA_DRAIN_RETRIES; count++) {
1929                 usleep_range(10000, 20000);
1930
1931                 /* start checking at the last ring to have pending Tx */
1932                 for (; i < interface->num_tx_queues; i++)
1933                         if (fm10k_get_tx_pending(interface->tx_ring[i], false))
1934                                 break;
1935
1936                 /* if all the queues are drained, we can break now */
1937                 if (i == interface->num_tx_queues)
1938                         break;
1939         }
1940
1941         if (count >= TX_DMA_DRAIN_RETRIES)
1942                 dev_err(&interface->pdev->dev,
1943                         "Tx queues failed to drain after %d tries. Tx DMA is probably hung.\n",
1944                         count);
1945 skip_tx_dma_drain:
1946         /* Disable DMA engine for Tx/Rx */
1947         err = hw->mac.ops.stop_hw(hw);
1948         if (err == FM10K_ERR_REQUESTS_PENDING)
1949                 dev_err(&interface->pdev->dev,
1950                         "due to pending requests hw was not shut down gracefully\n");
1951         else if (err)
1952                 dev_err(&interface->pdev->dev, "stop_hw failed: %d\n", err);
1953
1954         /* free any buffers still on the rings */
1955         fm10k_clean_all_tx_rings(interface);
1956         fm10k_clean_all_rx_rings(interface);
1957 }
1958
1959 /**
1960  * fm10k_sw_init - Initialize general software structures
1961  * @interface: host interface private structure to initialize
1962  * @ent: PCI device ID entry
1963  *
1964  * fm10k_sw_init initializes the interface private data structure.
1965  * Fields are initialized based on PCI device information and
1966  * OS network device settings (MTU size).
1967  **/
1968 static int fm10k_sw_init(struct fm10k_intfc *interface,
1969                          const struct pci_device_id *ent)
1970 {
1971         const struct fm10k_info *fi = fm10k_info_tbl[ent->driver_data];
1972         struct fm10k_hw *hw = &interface->hw;
1973         struct pci_dev *pdev = interface->pdev;
1974         struct net_device *netdev = interface->netdev;
1975         u32 rss_key[FM10K_RSSRK_SIZE];
1976         unsigned int rss;
1977         int err;
1978
1979         /* initialize back pointer */
1980         hw->back = interface;
1981         hw->hw_addr = interface->uc_addr;
1982
1983         /* PCI config space info */
1984         hw->vendor_id = pdev->vendor;
1985         hw->device_id = pdev->device;
1986         hw->revision_id = pdev->revision;
1987         hw->subsystem_vendor_id = pdev->subsystem_vendor;
1988         hw->subsystem_device_id = pdev->subsystem_device;
1989
1990         /* Setup hw api */
1991         memcpy(&hw->mac.ops, fi->mac_ops, sizeof(hw->mac.ops));
1992         hw->mac.type = fi->mac;
1993
1994         /* Setup IOV handlers */
1995         if (fi->iov_ops)
1996                 memcpy(&hw->iov.ops, fi->iov_ops, sizeof(hw->iov.ops));
1997
1998         /* Set common capability flags and settings */
1999         rss = min_t(int, FM10K_MAX_RSS_INDICES, num_online_cpus());
2000         interface->ring_feature[RING_F_RSS].limit = rss;
2001         fi->get_invariants(hw);
2002
2003         /* pick up the PCIe bus settings for reporting later */
2004         if (hw->mac.ops.get_bus_info)
2005                 hw->mac.ops.get_bus_info(hw);
2006
2007         /* limit the usable DMA range */
2008         if (hw->mac.ops.set_dma_mask)
2009                 hw->mac.ops.set_dma_mask(hw, dma_get_mask(&pdev->dev));
2010
2011         /* update netdev with DMA restrictions */
2012         if (dma_get_mask(&pdev->dev) > DMA_BIT_MASK(32)) {
2013                 netdev->features |= NETIF_F_HIGHDMA;
2014                 netdev->vlan_features |= NETIF_F_HIGHDMA;
2015         }
2016
2017         /* reset and initialize the hardware so it is in a known state */
2018         err = hw->mac.ops.reset_hw(hw);
2019         if (err) {
2020                 dev_err(&pdev->dev, "reset_hw failed: %d\n", err);
2021                 return err;
2022         }
2023
2024         err = hw->mac.ops.init_hw(hw);
2025         if (err) {
2026                 dev_err(&pdev->dev, "init_hw failed: %d\n", err);
2027                 return err;
2028         }
2029
2030         /* initialize hardware statistics */
2031         hw->mac.ops.update_hw_stats(hw, &interface->stats);
2032
2033         /* Set upper limit on IOV VFs that can be allocated */
2034         pci_sriov_set_totalvfs(pdev, hw->iov.total_vfs);
2035
2036         /* Start with random Ethernet address */
2037         eth_random_addr(hw->mac.addr);
2038
2039         /* Initialize MAC address from hardware */
2040         err = hw->mac.ops.read_mac_addr(hw);
2041         if (err) {
2042                 dev_warn(&pdev->dev,
2043                          "Failed to obtain MAC address defaulting to random\n");
2044                 /* tag address assignment as random */
2045                 netdev->addr_assign_type |= NET_ADDR_RANDOM;
2046         }
2047
2048         eth_hw_addr_set(netdev, hw->mac.addr);
2049         ether_addr_copy(netdev->perm_addr, hw->mac.addr);
2050
2051         if (!is_valid_ether_addr(netdev->perm_addr)) {
2052                 dev_err(&pdev->dev, "Invalid MAC Address\n");
2053                 return -EIO;
2054         }
2055
2056         /* initialize DCBNL interface */
2057         fm10k_dcbnl_set_ops(netdev);
2058
2059         /* set default ring sizes */
2060         interface->tx_ring_count = FM10K_DEFAULT_TXD;
2061         interface->rx_ring_count = FM10K_DEFAULT_RXD;
2062
2063         /* set default interrupt moderation */
2064         interface->tx_itr = FM10K_TX_ITR_DEFAULT;
2065         interface->rx_itr = FM10K_ITR_ADAPTIVE | FM10K_RX_ITR_DEFAULT;
2066
2067         /* Initialize the MAC/VLAN queue */
2068         INIT_LIST_HEAD(&interface->macvlan_requests);
2069
2070         netdev_rss_key_fill(rss_key, sizeof(rss_key));
2071         memcpy(interface->rssrk, rss_key, sizeof(rss_key));
2072
2073         /* Initialize the mailbox lock */
2074         spin_lock_init(&interface->mbx_lock);
2075         spin_lock_init(&interface->macvlan_lock);
2076
2077         /* Start off interface as being down */
2078         set_bit(__FM10K_DOWN, interface->state);
2079         set_bit(__FM10K_UPDATING_STATS, interface->state);
2080
2081         return 0;
2082 }
2083
2084 /**
2085  * fm10k_probe - Device Initialization Routine
2086  * @pdev: PCI device information struct
2087  * @ent: entry in fm10k_pci_tbl
2088  *
2089  * Returns 0 on success, negative on failure
2090  *
2091  * fm10k_probe initializes an interface identified by a pci_dev structure.
2092  * The OS initialization, configuring of the interface private structure,
2093  * and a hardware reset occur.
2094  **/
2095 static int fm10k_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
2096 {
2097         struct net_device *netdev;
2098         struct fm10k_intfc *interface;
2099         int err;
2100
2101         if (pdev->error_state != pci_channel_io_normal) {
2102                 dev_err(&pdev->dev,
2103                         "PCI device still in an error state. Unable to load...\n");
2104                 return -EIO;
2105         }
2106
2107         err = pci_enable_device_mem(pdev);
2108         if (err) {
2109                 dev_err(&pdev->dev,
2110                         "PCI enable device failed: %d\n", err);
2111                 return err;
2112         }
2113
2114         err = dma_set_mask_and_coherent(&pdev->dev, DMA_BIT_MASK(48));
2115         if (err)
2116                 err = dma_set_mask_and_coherent(&pdev->dev, DMA_BIT_MASK(32));
2117         if (err) {
2118                 dev_err(&pdev->dev,
2119                         "DMA configuration failed: %d\n", err);
2120                 goto err_dma;
2121         }
2122
2123         err = pci_request_mem_regions(pdev, fm10k_driver_name);
2124         if (err) {
2125                 dev_err(&pdev->dev,
2126                         "pci_request_selected_regions failed: %d\n", err);
2127                 goto err_pci_reg;
2128         }
2129
2130         pci_enable_pcie_error_reporting(pdev);
2131
2132         pci_set_master(pdev);
2133         pci_save_state(pdev);
2134
2135         netdev = fm10k_alloc_netdev(fm10k_info_tbl[ent->driver_data]);
2136         if (!netdev) {
2137                 err = -ENOMEM;
2138                 goto err_alloc_netdev;
2139         }
2140
2141         SET_NETDEV_DEV(netdev, &pdev->dev);
2142
2143         interface = netdev_priv(netdev);
2144         pci_set_drvdata(pdev, interface);
2145
2146         interface->netdev = netdev;
2147         interface->pdev = pdev;
2148
2149         interface->uc_addr = ioremap(pci_resource_start(pdev, 0),
2150                                      FM10K_UC_ADDR_SIZE);
2151         if (!interface->uc_addr) {
2152                 err = -EIO;
2153                 goto err_ioremap;
2154         }
2155
2156         err = fm10k_sw_init(interface, ent);
2157         if (err)
2158                 goto err_sw_init;
2159
2160         /* enable debugfs support */
2161         fm10k_dbg_intfc_init(interface);
2162
2163         err = fm10k_init_queueing_scheme(interface);
2164         if (err)
2165                 goto err_sw_init;
2166
2167         /* the mbx interrupt might attempt to schedule the service task, so we
2168          * must ensure it is disabled since we haven't yet requested the timer
2169          * or work item.
2170          */
2171         set_bit(__FM10K_SERVICE_DISABLE, interface->state);
2172
2173         err = fm10k_mbx_request_irq(interface);
2174         if (err)
2175                 goto err_mbx_interrupt;
2176
2177         /* final check of hardware state before registering the interface */
2178         err = fm10k_hw_ready(interface);
2179         if (err)
2180                 goto err_register;
2181
2182         err = register_netdev(netdev);
2183         if (err)
2184                 goto err_register;
2185
2186         /* carrier off reporting is important to ethtool even BEFORE open */
2187         netif_carrier_off(netdev);
2188
2189         /* stop all the transmit queues from transmitting until link is up */
2190         netif_tx_stop_all_queues(netdev);
2191
2192         /* Initialize service timer and service task late in order to avoid
2193          * cleanup issues.
2194          */
2195         timer_setup(&interface->service_timer, fm10k_service_timer, 0);
2196         INIT_WORK(&interface->service_task, fm10k_service_task);
2197
2198         /* Setup the MAC/VLAN queue */
2199         INIT_DELAYED_WORK(&interface->macvlan_task, fm10k_macvlan_task);
2200
2201         /* kick off service timer now, even when interface is down */
2202         mod_timer(&interface->service_timer, (HZ * 2) + jiffies);
2203
2204         /* print warning for non-optimal configurations */
2205         pcie_print_link_status(interface->pdev);
2206
2207         /* report MAC address for logging */
2208         dev_info(&pdev->dev, "%pM\n", netdev->dev_addr);
2209
2210         /* enable SR-IOV after registering netdev to enforce PF/VF ordering */
2211         fm10k_iov_configure(pdev, 0);
2212
2213         /* clear the service task disable bit and kick off service task */
2214         clear_bit(__FM10K_SERVICE_DISABLE, interface->state);
2215         fm10k_service_event_schedule(interface);
2216
2217         return 0;
2218
2219 err_register:
2220         fm10k_mbx_free_irq(interface);
2221 err_mbx_interrupt:
2222         fm10k_clear_queueing_scheme(interface);
2223 err_sw_init:
2224         if (interface->sw_addr)
2225                 iounmap(interface->sw_addr);
2226         iounmap(interface->uc_addr);
2227 err_ioremap:
2228         free_netdev(netdev);
2229 err_alloc_netdev:
2230         pci_disable_pcie_error_reporting(pdev);
2231         pci_release_mem_regions(pdev);
2232 err_pci_reg:
2233 err_dma:
2234         pci_disable_device(pdev);
2235         return err;
2236 }
2237
2238 /**
2239  * fm10k_remove - Device Removal Routine
2240  * @pdev: PCI device information struct
2241  *
2242  * fm10k_remove is called by the PCI subsystem to alert the driver
2243  * that it should release a PCI device.  The could be caused by a
2244  * Hot-Plug event, or because the driver is going to be removed from
2245  * memory.
2246  **/
2247 static void fm10k_remove(struct pci_dev *pdev)
2248 {
2249         struct fm10k_intfc *interface = pci_get_drvdata(pdev);
2250         struct net_device *netdev = interface->netdev;
2251
2252         del_timer_sync(&interface->service_timer);
2253
2254         fm10k_stop_service_event(interface);
2255         fm10k_stop_macvlan_task(interface);
2256
2257         /* Remove all pending MAC/VLAN requests */
2258         fm10k_clear_macvlan_queue(interface, interface->glort, true);
2259
2260         /* free netdev, this may bounce the interrupts due to setup_tc */
2261         if (netdev->reg_state == NETREG_REGISTERED)
2262                 unregister_netdev(netdev);
2263
2264         /* release VFs */
2265         fm10k_iov_disable(pdev);
2266
2267         /* disable mailbox interrupt */
2268         fm10k_mbx_free_irq(interface);
2269
2270         /* free interrupts */
2271         fm10k_clear_queueing_scheme(interface);
2272
2273         /* remove any debugfs interfaces */
2274         fm10k_dbg_intfc_exit(interface);
2275
2276         if (interface->sw_addr)
2277                 iounmap(interface->sw_addr);
2278         iounmap(interface->uc_addr);
2279
2280         free_netdev(netdev);
2281
2282         pci_release_mem_regions(pdev);
2283
2284         pci_disable_pcie_error_reporting(pdev);
2285
2286         pci_disable_device(pdev);
2287 }
2288
2289 static void fm10k_prepare_suspend(struct fm10k_intfc *interface)
2290 {
2291         /* the watchdog task reads from registers, which might appear like
2292          * a surprise remove if the PCIe device is disabled while we're
2293          * stopped. We stop the watchdog task until after we resume software
2294          * activity.
2295          *
2296          * Note that the MAC/VLAN task will be stopped as part of preparing
2297          * for reset so we don't need to handle it here.
2298          */
2299         fm10k_stop_service_event(interface);
2300
2301         if (fm10k_prepare_for_reset(interface))
2302                 set_bit(__FM10K_RESET_SUSPENDED, interface->state);
2303 }
2304
2305 static int fm10k_handle_resume(struct fm10k_intfc *interface)
2306 {
2307         struct fm10k_hw *hw = &interface->hw;
2308         int err;
2309
2310         /* Even if we didn't properly prepare for reset in
2311          * fm10k_prepare_suspend, we'll attempt to resume anyways.
2312          */
2313         if (!test_and_clear_bit(__FM10K_RESET_SUSPENDED, interface->state))
2314                 dev_warn(&interface->pdev->dev,
2315                          "Device was shut down as part of suspend... Attempting to recover\n");
2316
2317         /* reset statistics starting values */
2318         hw->mac.ops.rebind_hw_stats(hw, &interface->stats);
2319
2320         err = fm10k_handle_reset(interface);
2321         if (err)
2322                 return err;
2323
2324         /* assume host is not ready, to prevent race with watchdog in case we
2325          * actually don't have connection to the switch
2326          */
2327         interface->host_ready = false;
2328         fm10k_watchdog_host_not_ready(interface);
2329
2330         /* force link to stay down for a second to prevent link flutter */
2331         interface->link_down_event = jiffies + (HZ);
2332         set_bit(__FM10K_LINK_DOWN, interface->state);
2333
2334         /* restart the service task */
2335         fm10k_start_service_event(interface);
2336
2337         /* Restart the MAC/VLAN request queue in-case of outstanding events */
2338         fm10k_macvlan_schedule(interface);
2339
2340         return 0;
2341 }
2342
2343 /**
2344  * fm10k_resume - Generic PM resume hook
2345  * @dev: generic device structure
2346  *
2347  * Generic PM hook used when waking the device from a low power state after
2348  * suspend or hibernation. This function does not need to handle lower PCIe
2349  * device state as the stack takes care of that for us.
2350  **/
2351 static int __maybe_unused fm10k_resume(struct device *dev)
2352 {
2353         struct fm10k_intfc *interface = dev_get_drvdata(dev);
2354         struct net_device *netdev = interface->netdev;
2355         struct fm10k_hw *hw = &interface->hw;
2356         int err;
2357
2358         /* refresh hw_addr in case it was dropped */
2359         hw->hw_addr = interface->uc_addr;
2360
2361         err = fm10k_handle_resume(interface);
2362         if (err)
2363                 return err;
2364
2365         netif_device_attach(netdev);
2366
2367         return 0;
2368 }
2369
2370 /**
2371  * fm10k_suspend - Generic PM suspend hook
2372  * @dev: generic device structure
2373  *
2374  * Generic PM hook used when setting the device into a low power state for
2375  * system suspend or hibernation. This function does not need to handle lower
2376  * PCIe device state as the stack takes care of that for us.
2377  **/
2378 static int __maybe_unused fm10k_suspend(struct device *dev)
2379 {
2380         struct fm10k_intfc *interface = dev_get_drvdata(dev);
2381         struct net_device *netdev = interface->netdev;
2382
2383         netif_device_detach(netdev);
2384
2385         fm10k_prepare_suspend(interface);
2386
2387         return 0;
2388 }
2389
2390 /**
2391  * fm10k_io_error_detected - called when PCI error is detected
2392  * @pdev: Pointer to PCI device
2393  * @state: The current pci connection state
2394  *
2395  * This function is called after a PCI bus error affecting
2396  * this device has been detected.
2397  */
2398 static pci_ers_result_t fm10k_io_error_detected(struct pci_dev *pdev,
2399                                                 pci_channel_state_t state)
2400 {
2401         struct fm10k_intfc *interface = pci_get_drvdata(pdev);
2402         struct net_device *netdev = interface->netdev;
2403
2404         netif_device_detach(netdev);
2405
2406         if (state == pci_channel_io_perm_failure)
2407                 return PCI_ERS_RESULT_DISCONNECT;
2408
2409         fm10k_prepare_suspend(interface);
2410
2411         /* Request a slot reset. */
2412         return PCI_ERS_RESULT_NEED_RESET;
2413 }
2414
2415 /**
2416  * fm10k_io_slot_reset - called after the pci bus has been reset.
2417  * @pdev: Pointer to PCI device
2418  *
2419  * Restart the card from scratch, as if from a cold-boot.
2420  */
2421 static pci_ers_result_t fm10k_io_slot_reset(struct pci_dev *pdev)
2422 {
2423         pci_ers_result_t result;
2424
2425         if (pci_reenable_device(pdev)) {
2426                 dev_err(&pdev->dev,
2427                         "Cannot re-enable PCI device after reset.\n");
2428                 result = PCI_ERS_RESULT_DISCONNECT;
2429         } else {
2430                 pci_set_master(pdev);
2431                 pci_restore_state(pdev);
2432
2433                 /* After second error pci->state_saved is false, this
2434                  * resets it so EEH doesn't break.
2435                  */
2436                 pci_save_state(pdev);
2437
2438                 pci_wake_from_d3(pdev, false);
2439
2440                 result = PCI_ERS_RESULT_RECOVERED;
2441         }
2442
2443         return result;
2444 }
2445
2446 /**
2447  * fm10k_io_resume - called when traffic can start flowing again.
2448  * @pdev: Pointer to PCI device
2449  *
2450  * This callback is called when the error recovery driver tells us that
2451  * its OK to resume normal operation.
2452  */
2453 static void fm10k_io_resume(struct pci_dev *pdev)
2454 {
2455         struct fm10k_intfc *interface = pci_get_drvdata(pdev);
2456         struct net_device *netdev = interface->netdev;
2457         int err;
2458
2459         err = fm10k_handle_resume(interface);
2460
2461         if (err)
2462                 dev_warn(&pdev->dev,
2463                          "%s failed: %d\n", __func__, err);
2464         else
2465                 netif_device_attach(netdev);
2466 }
2467
2468 /**
2469  * fm10k_io_reset_prepare - called when PCI function is about to be reset
2470  * @pdev: Pointer to PCI device
2471  *
2472  * This callback is called when the PCI function is about to be reset,
2473  * allowing the device driver to prepare for it.
2474  */
2475 static void fm10k_io_reset_prepare(struct pci_dev *pdev)
2476 {
2477         /* warn incase we have any active VF devices */
2478         if (pci_num_vf(pdev))
2479                 dev_warn(&pdev->dev,
2480                          "PCIe FLR may cause issues for any active VF devices\n");
2481         fm10k_prepare_suspend(pci_get_drvdata(pdev));
2482 }
2483
2484 /**
2485  * fm10k_io_reset_done - called when PCI function has finished resetting
2486  * @pdev: Pointer to PCI device
2487  *
2488  * This callback is called just after the PCI function is reset, such as via
2489  * /sys/class/net/<enpX>/device/reset or similar.
2490  */
2491 static void fm10k_io_reset_done(struct pci_dev *pdev)
2492 {
2493         struct fm10k_intfc *interface = pci_get_drvdata(pdev);
2494         int err = fm10k_handle_resume(interface);
2495
2496         if (err) {
2497                 dev_warn(&pdev->dev,
2498                          "%s failed: %d\n", __func__, err);
2499                 netif_device_detach(interface->netdev);
2500         }
2501 }
2502
2503 static const struct pci_error_handlers fm10k_err_handler = {
2504         .error_detected = fm10k_io_error_detected,
2505         .slot_reset = fm10k_io_slot_reset,
2506         .resume = fm10k_io_resume,
2507         .reset_prepare = fm10k_io_reset_prepare,
2508         .reset_done = fm10k_io_reset_done,
2509 };
2510
2511 static SIMPLE_DEV_PM_OPS(fm10k_pm_ops, fm10k_suspend, fm10k_resume);
2512
2513 static struct pci_driver fm10k_driver = {
2514         .name                   = fm10k_driver_name,
2515         .id_table               = fm10k_pci_tbl,
2516         .probe                  = fm10k_probe,
2517         .remove                 = fm10k_remove,
2518         .driver = {
2519                 .pm             = &fm10k_pm_ops,
2520         },
2521         .sriov_configure        = fm10k_iov_configure,
2522         .err_handler            = &fm10k_err_handler
2523 };
2524
2525 /**
2526  * fm10k_register_pci_driver - register driver interface
2527  *
2528  * This function is called on module load in order to register the driver.
2529  **/
2530 int fm10k_register_pci_driver(void)
2531 {
2532         return pci_register_driver(&fm10k_driver);
2533 }
2534
2535 /**
2536  * fm10k_unregister_pci_driver - unregister driver interface
2537  *
2538  * This function is called on module unload in order to remove the driver.
2539  **/
2540 void fm10k_unregister_pci_driver(void)
2541 {
2542         pci_unregister_driver(&fm10k_driver);
2543 }