1 # SPDX-License-Identifier: GPL-2.0-only
3 # Freescale device configuration
6 config NET_VENDOR_FREESCALE
7 bool "Freescale devices"
9 depends on FSL_SOC || QUICC_ENGINE || CPM1 || CPM2 || PPC_MPC512x || \
10 M523x || M527x || M5272 || M528x || M520x || M532x || \
11 ARCH_MXC || ARCH_MXS || (PPC_MPC52xx && PPC_BESTCOMM) || \
12 ARCH_LAYERSCAPE || COMPILE_TEST
14 If you have a network (Ethernet) card belonging to this class, say Y.
16 Note that the answer to this question doesn't directly affect the
17 kernel: saying N will just cause the configurator to skip all
18 the questions about Freescale devices. If you say Y, you will be
19 asked for your specific card in the following questions.
21 if NET_VENDOR_FREESCALE
24 tristate "FEC ethernet controller (of ColdFire and some i.MX CPUs)"
25 depends on (M523x || M527x || M5272 || M528x || M520x || M532x || \
26 ARCH_MXC || SOC_IMX28 || COMPILE_TEST)
27 default ARCH_MXC || SOC_IMX28 if ARM
28 depends on PTP_1588_CLOCK_OPTIONAL
33 Say Y here if you want to use the built-in 10/100 Fast ethernet
34 controller on some Motorola ColdFire and Freescale i.MX processors.
37 tristate "FEC MPC52xx driver"
38 depends on PPC_MPC52xx && PPC_BESTCOMM
41 select PPC_BESTCOMM_FEC
43 This option enables support for the MPC5200's on-chip
44 Fast Ethernet Controller
45 If compiled as module, it will be called fec_mpc52xx.
47 config FEC_MPC52xx_MDIO
48 bool "FEC MPC52xx MDIO bus driver"
49 depends on FEC_MPC52xx
52 The MPC5200's FEC can connect to the Ethernet either with
53 an external MII PHY chip or 10 Mbps 7-wire interface
54 (Motorola? industry standard).
55 If your board uses an external PHY connected to FEC, enable this.
57 If compiled as module, it will be called fec_mpc52xx_phy.
59 source "drivers/net/ethernet/freescale/fs_enet/Kconfig"
60 source "drivers/net/ethernet/freescale/fman/Kconfig"
63 tristate "Freescale PQ MDIO"
66 This driver supports the MDIO bus used by the gianfar and UCC drivers.
69 tristate "Freescale XGMAC MDIO"
74 This driver supports the MDIO bus on the Fman 10G Ethernet MACs, and
75 on the FMan mEMAC (which supports both Clauses 22 and 45)
78 tristate "Freescale QE Gigabit Ethernet"
79 depends on QUICC_ENGINE && PPC32
84 This driver supports the Gigabit Ethernet mode of the QUICC Engine,
85 which is available on some Freescale SOCs.
87 config UGETH_TX_ON_DEMAND
88 bool "Transmit on Demand support"
92 tristate "Gianfar Ethernet"
99 This driver supports the Gigabit TSEC on the MPC83xx, MPC85xx,
100 and MPC86xx family of chips, the eTSEC on LS1021A and the FEC
103 source "drivers/net/ethernet/freescale/dpaa/Kconfig"
104 source "drivers/net/ethernet/freescale/dpaa2/Kconfig"
105 source "drivers/net/ethernet/freescale/enetc/Kconfig"
107 endif # NET_VENDOR_FREESCALE