1 /* bnx2x_main.c: QLogic Everest network driver.
3 * Copyright (c) 2007-2013 Broadcom Corporation
4 * Copyright (c) 2014 QLogic Corporation
7 * This program is free software; you can redistribute it and/or modify
8 * it under the terms of the GNU General Public License as published by
9 * the Free Software Foundation.
11 * Maintained by: Ariel Elior <ariel.elior@qlogic.com>
12 * Written by: Eliezer Tamir
13 * Based on code from Michael Chan's bnx2 driver
14 * UDP CSUM errata workaround by Arik Gendelman
15 * Slowpath and fastpath rework by Vladislav Zolotarov
16 * Statistics and Link management by Yitchak Gertner
20 #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
22 #include <linux/module.h>
23 #include <linux/moduleparam.h>
24 #include <linux/kernel.h>
25 #include <linux/device.h> /* for dev_info() */
26 #include <linux/timer.h>
27 #include <linux/errno.h>
28 #include <linux/ioport.h>
29 #include <linux/slab.h>
30 #include <linux/interrupt.h>
31 #include <linux/pci.h>
32 #include <linux/aer.h>
33 #include <linux/init.h>
34 #include <linux/netdevice.h>
35 #include <linux/etherdevice.h>
36 #include <linux/skbuff.h>
37 #include <linux/dma-mapping.h>
38 #include <linux/bitops.h>
39 #include <linux/irq.h>
40 #include <linux/delay.h>
41 #include <asm/byteorder.h>
42 #include <linux/time.h>
43 #include <linux/ethtool.h>
44 #include <linux/mii.h>
45 #include <linux/if_vlan.h>
46 #include <linux/crash_dump.h>
50 #include <net/vxlan.h>
51 #include <net/checksum.h>
52 #include <net/ip6_checksum.h>
53 #include <linux/workqueue.h>
54 #include <linux/crc32.h>
55 #include <linux/crc32c.h>
56 #include <linux/prefetch.h>
57 #include <linux/zlib.h>
59 #include <linux/semaphore.h>
60 #include <linux/stringify.h>
61 #include <linux/vmalloc.h>
63 #include "bnx2x_init.h"
64 #include "bnx2x_init_ops.h"
65 #include "bnx2x_cmn.h"
66 #include "bnx2x_vfpf.h"
67 #include "bnx2x_dcb.h"
69 #include <linux/firmware.h>
70 #include "bnx2x_fw_file_hdr.h"
72 #define FW_FILE_VERSION \
73 __stringify(BCM_5710_FW_MAJOR_VERSION) "." \
74 __stringify(BCM_5710_FW_MINOR_VERSION) "." \
75 __stringify(BCM_5710_FW_REVISION_VERSION) "." \
76 __stringify(BCM_5710_FW_ENGINEERING_VERSION)
77 #define FW_FILE_NAME_E1 "bnx2x/bnx2x-e1-" FW_FILE_VERSION ".fw"
78 #define FW_FILE_NAME_E1H "bnx2x/bnx2x-e1h-" FW_FILE_VERSION ".fw"
79 #define FW_FILE_NAME_E2 "bnx2x/bnx2x-e2-" FW_FILE_VERSION ".fw"
81 /* Time in jiffies before concluding the transmitter is hung */
82 #define TX_TIMEOUT (5*HZ)
84 static char version[] =
85 "QLogic 5771x/578xx 10/20-Gigabit Ethernet Driver "
86 DRV_MODULE_NAME " " DRV_MODULE_VERSION " (" DRV_MODULE_RELDATE ")\n";
88 MODULE_AUTHOR("Eliezer Tamir");
89 MODULE_DESCRIPTION("QLogic "
90 "BCM57710/57711/57711E/"
91 "57712/57712_MF/57800/57800_MF/57810/57810_MF/"
92 "57840/57840_MF Driver");
93 MODULE_LICENSE("GPL");
94 MODULE_VERSION(DRV_MODULE_VERSION);
95 MODULE_FIRMWARE(FW_FILE_NAME_E1);
96 MODULE_FIRMWARE(FW_FILE_NAME_E1H);
97 MODULE_FIRMWARE(FW_FILE_NAME_E2);
100 module_param_named(num_queues, bnx2x_num_queues, int, 0444);
101 MODULE_PARM_DESC(num_queues,
102 " Set number of queues (default is as a number of CPUs)");
104 static int disable_tpa;
105 module_param(disable_tpa, int, 0444);
106 MODULE_PARM_DESC(disable_tpa, " Disable the TPA (LRO) feature");
109 module_param(int_mode, int, 0444);
110 MODULE_PARM_DESC(int_mode, " Force interrupt mode other than MSI-X "
113 static int dropless_fc;
114 module_param(dropless_fc, int, 0444);
115 MODULE_PARM_DESC(dropless_fc, " Pause on exhausted host ring");
117 static int mrrs = -1;
118 module_param(mrrs, int, 0444);
119 MODULE_PARM_DESC(mrrs, " Force Max Read Req Size (0..3) (for debug)");
122 module_param(debug, int, 0444);
123 MODULE_PARM_DESC(debug, " Default debug msglevel");
125 static struct workqueue_struct *bnx2x_wq;
126 struct workqueue_struct *bnx2x_iov_wq;
128 struct bnx2x_mac_vals {
139 enum bnx2x_board_type {
163 /* indexed by board_type, above */
167 [BCM57710] = { "QLogic BCM57710 10 Gigabit PCIe [Everest]" },
168 [BCM57711] = { "QLogic BCM57711 10 Gigabit PCIe" },
169 [BCM57711E] = { "QLogic BCM57711E 10 Gigabit PCIe" },
170 [BCM57712] = { "QLogic BCM57712 10 Gigabit Ethernet" },
171 [BCM57712_MF] = { "QLogic BCM57712 10 Gigabit Ethernet Multi Function" },
172 [BCM57712_VF] = { "QLogic BCM57712 10 Gigabit Ethernet Virtual Function" },
173 [BCM57800] = { "QLogic BCM57800 10 Gigabit Ethernet" },
174 [BCM57800_MF] = { "QLogic BCM57800 10 Gigabit Ethernet Multi Function" },
175 [BCM57800_VF] = { "QLogic BCM57800 10 Gigabit Ethernet Virtual Function" },
176 [BCM57810] = { "QLogic BCM57810 10 Gigabit Ethernet" },
177 [BCM57810_MF] = { "QLogic BCM57810 10 Gigabit Ethernet Multi Function" },
178 [BCM57810_VF] = { "QLogic BCM57810 10 Gigabit Ethernet Virtual Function" },
179 [BCM57840_4_10] = { "QLogic BCM57840 10 Gigabit Ethernet" },
180 [BCM57840_2_20] = { "QLogic BCM57840 20 Gigabit Ethernet" },
181 [BCM57840_MF] = { "QLogic BCM57840 10/20 Gigabit Ethernet Multi Function" },
182 [BCM57840_VF] = { "QLogic BCM57840 10/20 Gigabit Ethernet Virtual Function" },
183 [BCM57811] = { "QLogic BCM57811 10 Gigabit Ethernet" },
184 [BCM57811_MF] = { "QLogic BCM57811 10 Gigabit Ethernet Multi Function" },
185 [BCM57840_O] = { "QLogic BCM57840 10/20 Gigabit Ethernet" },
186 [BCM57840_MFO] = { "QLogic BCM57840 10/20 Gigabit Ethernet Multi Function" },
187 [BCM57811_VF] = { "QLogic BCM57840 10/20 Gigabit Ethernet Virtual Function" }
190 #ifndef PCI_DEVICE_ID_NX2_57710
191 #define PCI_DEVICE_ID_NX2_57710 CHIP_NUM_57710
193 #ifndef PCI_DEVICE_ID_NX2_57711
194 #define PCI_DEVICE_ID_NX2_57711 CHIP_NUM_57711
196 #ifndef PCI_DEVICE_ID_NX2_57711E
197 #define PCI_DEVICE_ID_NX2_57711E CHIP_NUM_57711E
199 #ifndef PCI_DEVICE_ID_NX2_57712
200 #define PCI_DEVICE_ID_NX2_57712 CHIP_NUM_57712
202 #ifndef PCI_DEVICE_ID_NX2_57712_MF
203 #define PCI_DEVICE_ID_NX2_57712_MF CHIP_NUM_57712_MF
205 #ifndef PCI_DEVICE_ID_NX2_57712_VF
206 #define PCI_DEVICE_ID_NX2_57712_VF CHIP_NUM_57712_VF
208 #ifndef PCI_DEVICE_ID_NX2_57800
209 #define PCI_DEVICE_ID_NX2_57800 CHIP_NUM_57800
211 #ifndef PCI_DEVICE_ID_NX2_57800_MF
212 #define PCI_DEVICE_ID_NX2_57800_MF CHIP_NUM_57800_MF
214 #ifndef PCI_DEVICE_ID_NX2_57800_VF
215 #define PCI_DEVICE_ID_NX2_57800_VF CHIP_NUM_57800_VF
217 #ifndef PCI_DEVICE_ID_NX2_57810
218 #define PCI_DEVICE_ID_NX2_57810 CHIP_NUM_57810
220 #ifndef PCI_DEVICE_ID_NX2_57810_MF
221 #define PCI_DEVICE_ID_NX2_57810_MF CHIP_NUM_57810_MF
223 #ifndef PCI_DEVICE_ID_NX2_57840_O
224 #define PCI_DEVICE_ID_NX2_57840_O CHIP_NUM_57840_OBSOLETE
226 #ifndef PCI_DEVICE_ID_NX2_57810_VF
227 #define PCI_DEVICE_ID_NX2_57810_VF CHIP_NUM_57810_VF
229 #ifndef PCI_DEVICE_ID_NX2_57840_4_10
230 #define PCI_DEVICE_ID_NX2_57840_4_10 CHIP_NUM_57840_4_10
232 #ifndef PCI_DEVICE_ID_NX2_57840_2_20
233 #define PCI_DEVICE_ID_NX2_57840_2_20 CHIP_NUM_57840_2_20
235 #ifndef PCI_DEVICE_ID_NX2_57840_MFO
236 #define PCI_DEVICE_ID_NX2_57840_MFO CHIP_NUM_57840_MF_OBSOLETE
238 #ifndef PCI_DEVICE_ID_NX2_57840_MF
239 #define PCI_DEVICE_ID_NX2_57840_MF CHIP_NUM_57840_MF
241 #ifndef PCI_DEVICE_ID_NX2_57840_VF
242 #define PCI_DEVICE_ID_NX2_57840_VF CHIP_NUM_57840_VF
244 #ifndef PCI_DEVICE_ID_NX2_57811
245 #define PCI_DEVICE_ID_NX2_57811 CHIP_NUM_57811
247 #ifndef PCI_DEVICE_ID_NX2_57811_MF
248 #define PCI_DEVICE_ID_NX2_57811_MF CHIP_NUM_57811_MF
250 #ifndef PCI_DEVICE_ID_NX2_57811_VF
251 #define PCI_DEVICE_ID_NX2_57811_VF CHIP_NUM_57811_VF
254 static const struct pci_device_id bnx2x_pci_tbl[] = {
255 { PCI_VDEVICE(BROADCOM, PCI_DEVICE_ID_NX2_57710), BCM57710 },
256 { PCI_VDEVICE(BROADCOM, PCI_DEVICE_ID_NX2_57711), BCM57711 },
257 { PCI_VDEVICE(BROADCOM, PCI_DEVICE_ID_NX2_57711E), BCM57711E },
258 { PCI_VDEVICE(BROADCOM, PCI_DEVICE_ID_NX2_57712), BCM57712 },
259 { PCI_VDEVICE(BROADCOM, PCI_DEVICE_ID_NX2_57712_MF), BCM57712_MF },
260 { PCI_VDEVICE(BROADCOM, PCI_DEVICE_ID_NX2_57712_VF), BCM57712_VF },
261 { PCI_VDEVICE(BROADCOM, PCI_DEVICE_ID_NX2_57800), BCM57800 },
262 { PCI_VDEVICE(BROADCOM, PCI_DEVICE_ID_NX2_57800_MF), BCM57800_MF },
263 { PCI_VDEVICE(BROADCOM, PCI_DEVICE_ID_NX2_57800_VF), BCM57800_VF },
264 { PCI_VDEVICE(BROADCOM, PCI_DEVICE_ID_NX2_57810), BCM57810 },
265 { PCI_VDEVICE(BROADCOM, PCI_DEVICE_ID_NX2_57810_MF), BCM57810_MF },
266 { PCI_VDEVICE(BROADCOM, PCI_DEVICE_ID_NX2_57840_O), BCM57840_O },
267 { PCI_VDEVICE(BROADCOM, PCI_DEVICE_ID_NX2_57840_4_10), BCM57840_4_10 },
268 { PCI_VDEVICE(QLOGIC, PCI_DEVICE_ID_NX2_57840_4_10), BCM57840_4_10 },
269 { PCI_VDEVICE(BROADCOM, PCI_DEVICE_ID_NX2_57840_2_20), BCM57840_2_20 },
270 { PCI_VDEVICE(BROADCOM, PCI_DEVICE_ID_NX2_57810_VF), BCM57810_VF },
271 { PCI_VDEVICE(BROADCOM, PCI_DEVICE_ID_NX2_57840_MFO), BCM57840_MFO },
272 { PCI_VDEVICE(BROADCOM, PCI_DEVICE_ID_NX2_57840_MF), BCM57840_MF },
273 { PCI_VDEVICE(QLOGIC, PCI_DEVICE_ID_NX2_57840_MF), BCM57840_MF },
274 { PCI_VDEVICE(BROADCOM, PCI_DEVICE_ID_NX2_57840_VF), BCM57840_VF },
275 { PCI_VDEVICE(QLOGIC, PCI_DEVICE_ID_NX2_57840_VF), BCM57840_VF },
276 { PCI_VDEVICE(BROADCOM, PCI_DEVICE_ID_NX2_57811), BCM57811 },
277 { PCI_VDEVICE(BROADCOM, PCI_DEVICE_ID_NX2_57811_MF), BCM57811_MF },
278 { PCI_VDEVICE(BROADCOM, PCI_DEVICE_ID_NX2_57811_VF), BCM57811_VF },
282 MODULE_DEVICE_TABLE(pci, bnx2x_pci_tbl);
284 /* Global resources for unloading a previously loaded device */
285 #define BNX2X_PREV_WAIT_NEEDED 1
286 static DEFINE_SEMAPHORE(bnx2x_prev_sem);
287 static LIST_HEAD(bnx2x_prev_list);
289 /* Forward declaration */
290 static struct cnic_eth_dev *bnx2x_cnic_probe(struct net_device *dev);
291 static u32 bnx2x_rx_ustorm_prods_offset(struct bnx2x_fastpath *fp);
292 static int bnx2x_set_storm_rx_mode(struct bnx2x *bp);
294 /****************************************************************************
295 * General service functions
296 ****************************************************************************/
298 static int bnx2x_hwtstamp_ioctl(struct bnx2x *bp, struct ifreq *ifr);
300 static void __storm_memset_dma_mapping(struct bnx2x *bp,
301 u32 addr, dma_addr_t mapping)
303 REG_WR(bp, addr, U64_LO(mapping));
304 REG_WR(bp, addr + 4, U64_HI(mapping));
307 static void storm_memset_spq_addr(struct bnx2x *bp,
308 dma_addr_t mapping, u16 abs_fid)
310 u32 addr = XSEM_REG_FAST_MEMORY +
311 XSTORM_SPQ_PAGE_BASE_OFFSET(abs_fid);
313 __storm_memset_dma_mapping(bp, addr, mapping);
316 static void storm_memset_vf_to_pf(struct bnx2x *bp, u16 abs_fid,
319 REG_WR8(bp, BAR_XSTRORM_INTMEM + XSTORM_VF_TO_PF_OFFSET(abs_fid),
321 REG_WR8(bp, BAR_CSTRORM_INTMEM + CSTORM_VF_TO_PF_OFFSET(abs_fid),
323 REG_WR8(bp, BAR_TSTRORM_INTMEM + TSTORM_VF_TO_PF_OFFSET(abs_fid),
325 REG_WR8(bp, BAR_USTRORM_INTMEM + USTORM_VF_TO_PF_OFFSET(abs_fid),
329 static void storm_memset_func_en(struct bnx2x *bp, u16 abs_fid,
332 REG_WR8(bp, BAR_XSTRORM_INTMEM + XSTORM_FUNC_EN_OFFSET(abs_fid),
334 REG_WR8(bp, BAR_CSTRORM_INTMEM + CSTORM_FUNC_EN_OFFSET(abs_fid),
336 REG_WR8(bp, BAR_TSTRORM_INTMEM + TSTORM_FUNC_EN_OFFSET(abs_fid),
338 REG_WR8(bp, BAR_USTRORM_INTMEM + USTORM_FUNC_EN_OFFSET(abs_fid),
342 static void storm_memset_eq_data(struct bnx2x *bp,
343 struct event_ring_data *eq_data,
346 size_t size = sizeof(struct event_ring_data);
348 u32 addr = BAR_CSTRORM_INTMEM + CSTORM_EVENT_RING_DATA_OFFSET(pfid);
350 __storm_memset_struct(bp, addr, size, (u32 *)eq_data);
353 static void storm_memset_eq_prod(struct bnx2x *bp, u16 eq_prod,
356 u32 addr = BAR_CSTRORM_INTMEM + CSTORM_EVENT_RING_PROD_OFFSET(pfid);
357 REG_WR16(bp, addr, eq_prod);
361 * locking is done by mcp
363 static void bnx2x_reg_wr_ind(struct bnx2x *bp, u32 addr, u32 val)
365 pci_write_config_dword(bp->pdev, PCICFG_GRC_ADDRESS, addr);
366 pci_write_config_dword(bp->pdev, PCICFG_GRC_DATA, val);
367 pci_write_config_dword(bp->pdev, PCICFG_GRC_ADDRESS,
368 PCICFG_VENDOR_ID_OFFSET);
371 static u32 bnx2x_reg_rd_ind(struct bnx2x *bp, u32 addr)
375 pci_write_config_dword(bp->pdev, PCICFG_GRC_ADDRESS, addr);
376 pci_read_config_dword(bp->pdev, PCICFG_GRC_DATA, &val);
377 pci_write_config_dword(bp->pdev, PCICFG_GRC_ADDRESS,
378 PCICFG_VENDOR_ID_OFFSET);
383 #define DMAE_DP_SRC_GRC "grc src_addr [%08x]"
384 #define DMAE_DP_SRC_PCI "pci src_addr [%x:%08x]"
385 #define DMAE_DP_DST_GRC "grc dst_addr [%08x]"
386 #define DMAE_DP_DST_PCI "pci dst_addr [%x:%08x]"
387 #define DMAE_DP_DST_NONE "dst_addr [none]"
389 static void bnx2x_dp_dmae(struct bnx2x *bp,
390 struct dmae_command *dmae, int msglvl)
392 u32 src_type = dmae->opcode & DMAE_COMMAND_SRC;
395 switch (dmae->opcode & DMAE_COMMAND_DST) {
396 case DMAE_CMD_DST_PCI:
397 if (src_type == DMAE_CMD_SRC_PCI)
398 DP(msglvl, "DMAE: opcode 0x%08x\n"
399 "src [%x:%08x], len [%d*4], dst [%x:%08x]\n"
400 "comp_addr [%x:%08x], comp_val 0x%08x\n",
401 dmae->opcode, dmae->src_addr_hi, dmae->src_addr_lo,
402 dmae->len, dmae->dst_addr_hi, dmae->dst_addr_lo,
403 dmae->comp_addr_hi, dmae->comp_addr_lo,
406 DP(msglvl, "DMAE: opcode 0x%08x\n"
407 "src [%08x], len [%d*4], dst [%x:%08x]\n"
408 "comp_addr [%x:%08x], comp_val 0x%08x\n",
409 dmae->opcode, dmae->src_addr_lo >> 2,
410 dmae->len, dmae->dst_addr_hi, dmae->dst_addr_lo,
411 dmae->comp_addr_hi, dmae->comp_addr_lo,
414 case DMAE_CMD_DST_GRC:
415 if (src_type == DMAE_CMD_SRC_PCI)
416 DP(msglvl, "DMAE: opcode 0x%08x\n"
417 "src [%x:%08x], len [%d*4], dst_addr [%08x]\n"
418 "comp_addr [%x:%08x], comp_val 0x%08x\n",
419 dmae->opcode, dmae->src_addr_hi, dmae->src_addr_lo,
420 dmae->len, dmae->dst_addr_lo >> 2,
421 dmae->comp_addr_hi, dmae->comp_addr_lo,
424 DP(msglvl, "DMAE: opcode 0x%08x\n"
425 "src [%08x], len [%d*4], dst [%08x]\n"
426 "comp_addr [%x:%08x], comp_val 0x%08x\n",
427 dmae->opcode, dmae->src_addr_lo >> 2,
428 dmae->len, dmae->dst_addr_lo >> 2,
429 dmae->comp_addr_hi, dmae->comp_addr_lo,
433 if (src_type == DMAE_CMD_SRC_PCI)
434 DP(msglvl, "DMAE: opcode 0x%08x\n"
435 "src_addr [%x:%08x] len [%d * 4] dst_addr [none]\n"
436 "comp_addr [%x:%08x] comp_val 0x%08x\n",
437 dmae->opcode, dmae->src_addr_hi, dmae->src_addr_lo,
438 dmae->len, dmae->comp_addr_hi, dmae->comp_addr_lo,
441 DP(msglvl, "DMAE: opcode 0x%08x\n"
442 "src_addr [%08x] len [%d * 4] dst_addr [none]\n"
443 "comp_addr [%x:%08x] comp_val 0x%08x\n",
444 dmae->opcode, dmae->src_addr_lo >> 2,
445 dmae->len, dmae->comp_addr_hi, dmae->comp_addr_lo,
450 for (i = 0; i < (sizeof(struct dmae_command)/4); i++)
451 DP(msglvl, "DMAE RAW [%02d]: 0x%08x\n",
452 i, *(((u32 *)dmae) + i));
455 /* copy command into DMAE command memory and set DMAE command go */
456 void bnx2x_post_dmae(struct bnx2x *bp, struct dmae_command *dmae, int idx)
461 cmd_offset = (DMAE_REG_CMD_MEM + sizeof(struct dmae_command) * idx);
462 for (i = 0; i < (sizeof(struct dmae_command)/4); i++) {
463 REG_WR(bp, cmd_offset + i*4, *(((u32 *)dmae) + i));
465 REG_WR(bp, dmae_reg_go_c[idx], 1);
468 u32 bnx2x_dmae_opcode_add_comp(u32 opcode, u8 comp_type)
470 return opcode | ((comp_type << DMAE_COMMAND_C_DST_SHIFT) |
474 u32 bnx2x_dmae_opcode_clr_src_reset(u32 opcode)
476 return opcode & ~DMAE_CMD_SRC_RESET;
479 u32 bnx2x_dmae_opcode(struct bnx2x *bp, u8 src_type, u8 dst_type,
480 bool with_comp, u8 comp_type)
484 opcode |= ((src_type << DMAE_COMMAND_SRC_SHIFT) |
485 (dst_type << DMAE_COMMAND_DST_SHIFT));
487 opcode |= (DMAE_CMD_SRC_RESET | DMAE_CMD_DST_RESET);
489 opcode |= (BP_PORT(bp) ? DMAE_CMD_PORT_1 : DMAE_CMD_PORT_0);
490 opcode |= ((BP_VN(bp) << DMAE_CMD_E1HVN_SHIFT) |
491 (BP_VN(bp) << DMAE_COMMAND_DST_VN_SHIFT));
492 opcode |= (DMAE_COM_SET_ERR << DMAE_COMMAND_ERR_POLICY_SHIFT);
495 opcode |= DMAE_CMD_ENDIANITY_B_DW_SWAP;
497 opcode |= DMAE_CMD_ENDIANITY_DW_SWAP;
500 opcode = bnx2x_dmae_opcode_add_comp(opcode, comp_type);
504 void bnx2x_prep_dmae_with_comp(struct bnx2x *bp,
505 struct dmae_command *dmae,
506 u8 src_type, u8 dst_type)
508 memset(dmae, 0, sizeof(struct dmae_command));
511 dmae->opcode = bnx2x_dmae_opcode(bp, src_type, dst_type,
512 true, DMAE_COMP_PCI);
514 /* fill in the completion parameters */
515 dmae->comp_addr_lo = U64_LO(bnx2x_sp_mapping(bp, wb_comp));
516 dmae->comp_addr_hi = U64_HI(bnx2x_sp_mapping(bp, wb_comp));
517 dmae->comp_val = DMAE_COMP_VAL;
520 /* issue a dmae command over the init-channel and wait for completion */
521 int bnx2x_issue_dmae_with_comp(struct bnx2x *bp, struct dmae_command *dmae,
524 int cnt = CHIP_REV_IS_SLOW(bp) ? (400000) : 4000;
527 bnx2x_dp_dmae(bp, dmae, BNX2X_MSG_DMAE);
529 /* Lock the dmae channel. Disable BHs to prevent a dead-lock
530 * as long as this code is called both from syscall context and
531 * from ndo_set_rx_mode() flow that may be called from BH.
534 spin_lock_bh(&bp->dmae_lock);
536 /* reset completion */
539 /* post the command on the channel used for initializations */
540 bnx2x_post_dmae(bp, dmae, INIT_DMAE_C(bp));
542 /* wait for completion */
544 while ((*comp & ~DMAE_PCI_ERR_FLAG) != DMAE_COMP_VAL) {
547 (bp->recovery_state != BNX2X_RECOVERY_DONE &&
548 bp->recovery_state != BNX2X_RECOVERY_NIC_LOADING)) {
549 BNX2X_ERR("DMAE timeout!\n");
556 if (*comp & DMAE_PCI_ERR_FLAG) {
557 BNX2X_ERR("DMAE PCI error!\n");
563 spin_unlock_bh(&bp->dmae_lock);
568 void bnx2x_write_dmae(struct bnx2x *bp, dma_addr_t dma_addr, u32 dst_addr,
572 struct dmae_command dmae;
574 if (!bp->dmae_ready) {
575 u32 *data = bnx2x_sp(bp, wb_data[0]);
578 bnx2x_init_ind_wr(bp, dst_addr, data, len32);
580 bnx2x_init_str_wr(bp, dst_addr, data, len32);
584 /* set opcode and fixed command fields */
585 bnx2x_prep_dmae_with_comp(bp, &dmae, DMAE_SRC_PCI, DMAE_DST_GRC);
587 /* fill in addresses and len */
588 dmae.src_addr_lo = U64_LO(dma_addr);
589 dmae.src_addr_hi = U64_HI(dma_addr);
590 dmae.dst_addr_lo = dst_addr >> 2;
591 dmae.dst_addr_hi = 0;
594 /* issue the command and wait for completion */
595 rc = bnx2x_issue_dmae_with_comp(bp, &dmae, bnx2x_sp(bp, wb_comp));
597 BNX2X_ERR("DMAE returned failure %d\n", rc);
598 #ifdef BNX2X_STOP_ON_ERROR
604 void bnx2x_read_dmae(struct bnx2x *bp, u32 src_addr, u32 len32)
607 struct dmae_command dmae;
609 if (!bp->dmae_ready) {
610 u32 *data = bnx2x_sp(bp, wb_data[0]);
614 for (i = 0; i < len32; i++)
615 data[i] = bnx2x_reg_rd_ind(bp, src_addr + i*4);
617 for (i = 0; i < len32; i++)
618 data[i] = REG_RD(bp, src_addr + i*4);
623 /* set opcode and fixed command fields */
624 bnx2x_prep_dmae_with_comp(bp, &dmae, DMAE_SRC_GRC, DMAE_DST_PCI);
626 /* fill in addresses and len */
627 dmae.src_addr_lo = src_addr >> 2;
628 dmae.src_addr_hi = 0;
629 dmae.dst_addr_lo = U64_LO(bnx2x_sp_mapping(bp, wb_data));
630 dmae.dst_addr_hi = U64_HI(bnx2x_sp_mapping(bp, wb_data));
633 /* issue the command and wait for completion */
634 rc = bnx2x_issue_dmae_with_comp(bp, &dmae, bnx2x_sp(bp, wb_comp));
636 BNX2X_ERR("DMAE returned failure %d\n", rc);
637 #ifdef BNX2X_STOP_ON_ERROR
643 static void bnx2x_write_dmae_phys_len(struct bnx2x *bp, dma_addr_t phys_addr,
646 int dmae_wr_max = DMAE_LEN32_WR_MAX(bp);
649 while (len > dmae_wr_max) {
650 bnx2x_write_dmae(bp, phys_addr + offset,
651 addr + offset, dmae_wr_max);
652 offset += dmae_wr_max * 4;
656 bnx2x_write_dmae(bp, phys_addr + offset, addr + offset, len);
668 #define REGS_IN_ENTRY 4
670 static inline int bnx2x_get_assert_list_entry(struct bnx2x *bp,
676 return XSTORM_ASSERT_LIST_OFFSET(entry);
678 return TSTORM_ASSERT_LIST_OFFSET(entry);
680 return CSTORM_ASSERT_LIST_OFFSET(entry);
682 return USTORM_ASSERT_LIST_OFFSET(entry);
685 BNX2X_ERR("unknown storm\n");
690 static int bnx2x_mc_assert(struct bnx2x *bp)
695 u32 regs[REGS_IN_ENTRY];
696 u32 bar_storm_intmem[STORMS_NUM] = {
702 u32 storm_assert_list_index[STORMS_NUM] = {
703 XSTORM_ASSERT_LIST_INDEX_OFFSET,
704 TSTORM_ASSERT_LIST_INDEX_OFFSET,
705 CSTORM_ASSERT_LIST_INDEX_OFFSET,
706 USTORM_ASSERT_LIST_INDEX_OFFSET
708 char *storms_string[STORMS_NUM] = {
715 for (storm = XSTORM; storm < MAX_STORMS; storm++) {
716 last_idx = REG_RD8(bp, bar_storm_intmem[storm] +
717 storm_assert_list_index[storm]);
719 BNX2X_ERR("%s_ASSERT_LIST_INDEX 0x%x\n",
720 storms_string[storm], last_idx);
722 /* print the asserts */
723 for (i = 0; i < STROM_ASSERT_ARRAY_SIZE; i++) {
724 /* read a single assert entry */
725 for (j = 0; j < REGS_IN_ENTRY; j++)
726 regs[j] = REG_RD(bp, bar_storm_intmem[storm] +
727 bnx2x_get_assert_list_entry(bp,
732 /* log entry if it contains a valid assert */
733 if (regs[0] != COMMON_ASM_INVALID_ASSERT_OPCODE) {
734 BNX2X_ERR("%s_ASSERT_INDEX 0x%x = 0x%08x 0x%08x 0x%08x 0x%08x\n",
735 storms_string[storm], i, regs[3],
736 regs[2], regs[1], regs[0]);
744 BNX2X_ERR("Chip Revision: %s, FW Version: %d_%d_%d\n",
745 CHIP_IS_E1(bp) ? "everest1" :
746 CHIP_IS_E1H(bp) ? "everest1h" :
747 CHIP_IS_E2(bp) ? "everest2" : "everest3",
748 BCM_5710_FW_MAJOR_VERSION,
749 BCM_5710_FW_MINOR_VERSION,
750 BCM_5710_FW_REVISION_VERSION);
755 #define MCPR_TRACE_BUFFER_SIZE (0x800)
756 #define SCRATCH_BUFFER_SIZE(bp) \
757 (CHIP_IS_E1(bp) ? 0x10000 : (CHIP_IS_E1H(bp) ? 0x20000 : 0x28000))
759 void bnx2x_fw_dump_lvl(struct bnx2x *bp, const char *lvl)
765 u32 trace_shmem_base;
767 BNX2X_ERR("NO MCP - can not dump\n");
770 netdev_printk(lvl, bp->dev, "bc %d.%d.%d\n",
771 (bp->common.bc_ver & 0xff0000) >> 16,
772 (bp->common.bc_ver & 0xff00) >> 8,
773 (bp->common.bc_ver & 0xff));
775 if (pci_channel_offline(bp->pdev)) {
776 BNX2X_ERR("Cannot dump MCP info while in PCI error\n");
780 val = REG_RD(bp, MCP_REG_MCPR_CPU_PROGRAM_COUNTER);
781 if (val == REG_RD(bp, MCP_REG_MCPR_CPU_PROGRAM_COUNTER))
782 BNX2X_ERR("%s" "MCP PC at 0x%x\n", lvl, val);
784 if (BP_PATH(bp) == 0)
785 trace_shmem_base = bp->common.shmem_base;
787 trace_shmem_base = SHMEM2_RD(bp, other_shmem_base_addr);
790 if (trace_shmem_base < MCPR_SCRATCH_BASE(bp) + MCPR_TRACE_BUFFER_SIZE ||
791 trace_shmem_base >= MCPR_SCRATCH_BASE(bp) +
792 SCRATCH_BUFFER_SIZE(bp)) {
793 BNX2X_ERR("Unable to dump trace buffer (mark %x)\n",
798 addr = trace_shmem_base - MCPR_TRACE_BUFFER_SIZE;
800 /* validate TRCB signature */
801 mark = REG_RD(bp, addr);
802 if (mark != MFW_TRACE_SIGNATURE) {
803 BNX2X_ERR("Trace buffer signature is missing.");
807 /* read cyclic buffer pointer */
809 mark = REG_RD(bp, addr);
810 mark = MCPR_SCRATCH_BASE(bp) + ((mark + 0x3) & ~0x3) - 0x08000000;
811 if (mark >= trace_shmem_base || mark < addr + 4) {
812 BNX2X_ERR("Mark doesn't fall inside Trace Buffer\n");
815 printk("%s" "begin fw dump (mark 0x%x)\n", lvl, mark);
819 /* dump buffer after the mark */
820 for (offset = mark; offset < trace_shmem_base; offset += 0x8*4) {
821 for (word = 0; word < 8; word++)
822 data[word] = htonl(REG_RD(bp, offset + 4*word));
824 pr_cont("%s", (char *)data);
827 /* dump buffer before the mark */
828 for (offset = addr + 4; offset <= mark; offset += 0x8*4) {
829 for (word = 0; word < 8; word++)
830 data[word] = htonl(REG_RD(bp, offset + 4*word));
832 pr_cont("%s", (char *)data);
834 printk("%s" "end of fw dump\n", lvl);
837 static void bnx2x_fw_dump(struct bnx2x *bp)
839 bnx2x_fw_dump_lvl(bp, KERN_ERR);
842 static void bnx2x_hc_int_disable(struct bnx2x *bp)
844 int port = BP_PORT(bp);
845 u32 addr = port ? HC_REG_CONFIG_1 : HC_REG_CONFIG_0;
846 u32 val = REG_RD(bp, addr);
848 /* in E1 we must use only PCI configuration space to disable
849 * MSI/MSIX capability
850 * It's forbidden to disable IGU_PF_CONF_MSI_MSIX_EN in HC block
852 if (CHIP_IS_E1(bp)) {
853 /* Since IGU_PF_CONF_MSI_MSIX_EN still always on
854 * Use mask register to prevent from HC sending interrupts
855 * after we exit the function
857 REG_WR(bp, HC_REG_INT_MASK + port*4, 0);
859 val &= ~(HC_CONFIG_0_REG_SINGLE_ISR_EN_0 |
860 HC_CONFIG_0_REG_INT_LINE_EN_0 |
861 HC_CONFIG_0_REG_ATTN_BIT_EN_0);
863 val &= ~(HC_CONFIG_0_REG_SINGLE_ISR_EN_0 |
864 HC_CONFIG_0_REG_MSI_MSIX_INT_EN_0 |
865 HC_CONFIG_0_REG_INT_LINE_EN_0 |
866 HC_CONFIG_0_REG_ATTN_BIT_EN_0);
869 "write %x to HC %d (addr 0x%x)\n",
872 REG_WR(bp, addr, val);
873 if (REG_RD(bp, addr) != val)
874 BNX2X_ERR("BUG! Proper val not read from IGU!\n");
877 static void bnx2x_igu_int_disable(struct bnx2x *bp)
879 u32 val = REG_RD(bp, IGU_REG_PF_CONFIGURATION);
881 val &= ~(IGU_PF_CONF_MSI_MSIX_EN |
882 IGU_PF_CONF_INT_LINE_EN |
883 IGU_PF_CONF_ATTN_BIT_EN);
885 DP(NETIF_MSG_IFDOWN, "write %x to IGU\n", val);
887 REG_WR(bp, IGU_REG_PF_CONFIGURATION, val);
888 if (REG_RD(bp, IGU_REG_PF_CONFIGURATION) != val)
889 BNX2X_ERR("BUG! Proper val not read from IGU!\n");
892 static void bnx2x_int_disable(struct bnx2x *bp)
894 if (bp->common.int_block == INT_BLOCK_HC)
895 bnx2x_hc_int_disable(bp);
897 bnx2x_igu_int_disable(bp);
900 void bnx2x_panic_dump(struct bnx2x *bp, bool disable_int)
904 struct hc_sp_status_block_data sp_sb_data;
905 int func = BP_FUNC(bp);
906 #ifdef BNX2X_STOP_ON_ERROR
907 u16 start = 0, end = 0;
910 if (IS_PF(bp) && disable_int)
911 bnx2x_int_disable(bp);
913 bp->stats_state = STATS_STATE_DISABLED;
914 bp->eth_stats.unrecoverable_error++;
915 DP(BNX2X_MSG_STATS, "stats_state - DISABLED\n");
917 BNX2X_ERR("begin crash dump -----------------\n");
922 struct host_sp_status_block *def_sb = bp->def_status_blk;
923 int data_size, cstorm_offset;
925 BNX2X_ERR("def_idx(0x%x) def_att_idx(0x%x) attn_state(0x%x) spq_prod_idx(0x%x) next_stats_cnt(0x%x)\n",
926 bp->def_idx, bp->def_att_idx, bp->attn_state,
927 bp->spq_prod_idx, bp->stats_counter);
928 BNX2X_ERR("DSB: attn bits(0x%x) ack(0x%x) id(0x%x) idx(0x%x)\n",
929 def_sb->atten_status_block.attn_bits,
930 def_sb->atten_status_block.attn_bits_ack,
931 def_sb->atten_status_block.status_block_id,
932 def_sb->atten_status_block.attn_bits_index);
934 for (i = 0; i < HC_SP_SB_MAX_INDICES; i++)
936 def_sb->sp_sb.index_values[i],
937 (i == HC_SP_SB_MAX_INDICES - 1) ? ") " : " ");
939 data_size = sizeof(struct hc_sp_status_block_data) /
941 cstorm_offset = CSTORM_SP_STATUS_BLOCK_DATA_OFFSET(func);
942 for (i = 0; i < data_size; i++)
943 *((u32 *)&sp_sb_data + i) =
944 REG_RD(bp, BAR_CSTRORM_INTMEM + cstorm_offset +
947 pr_cont("igu_sb_id(0x%x) igu_seg_id(0x%x) pf_id(0x%x) vnic_id(0x%x) vf_id(0x%x) vf_valid (0x%x) state(0x%x)\n",
948 sp_sb_data.igu_sb_id,
949 sp_sb_data.igu_seg_id,
950 sp_sb_data.p_func.pf_id,
951 sp_sb_data.p_func.vnic_id,
952 sp_sb_data.p_func.vf_id,
953 sp_sb_data.p_func.vf_valid,
957 for_each_eth_queue(bp, i) {
958 struct bnx2x_fastpath *fp = &bp->fp[i];
960 struct hc_status_block_data_e2 sb_data_e2;
961 struct hc_status_block_data_e1x sb_data_e1x;
962 struct hc_status_block_sm *hc_sm_p =
964 sb_data_e1x.common.state_machine :
965 sb_data_e2.common.state_machine;
966 struct hc_index_data *hc_index_p =
968 sb_data_e1x.index_data :
969 sb_data_e2.index_data;
972 struct bnx2x_fp_txdata txdata;
981 BNX2X_ERR("fp%d: rx_bd_prod(0x%x) rx_bd_cons(0x%x) rx_comp_prod(0x%x) rx_comp_cons(0x%x) *rx_cons_sb(0x%x)\n",
982 i, fp->rx_bd_prod, fp->rx_bd_cons,
984 fp->rx_comp_cons, le16_to_cpu(*fp->rx_cons_sb));
985 BNX2X_ERR(" rx_sge_prod(0x%x) last_max_sge(0x%x) fp_hc_idx(0x%x)\n",
986 fp->rx_sge_prod, fp->last_max_sge,
987 le16_to_cpu(fp->fp_hc_idx));
990 for_each_cos_in_tx_queue(fp, cos)
992 if (!fp->txdata_ptr[cos])
995 txdata = *fp->txdata_ptr[cos];
997 if (!txdata.tx_cons_sb)
1000 BNX2X_ERR("fp%d: tx_pkt_prod(0x%x) tx_pkt_cons(0x%x) tx_bd_prod(0x%x) tx_bd_cons(0x%x) *tx_cons_sb(0x%x)\n",
1001 i, txdata.tx_pkt_prod,
1002 txdata.tx_pkt_cons, txdata.tx_bd_prod,
1004 le16_to_cpu(*txdata.tx_cons_sb));
1007 loop = CHIP_IS_E1x(bp) ?
1008 HC_SB_MAX_INDICES_E1X : HC_SB_MAX_INDICES_E2;
1015 BNX2X_ERR(" run indexes (");
1016 for (j = 0; j < HC_SB_MAX_SM; j++)
1018 fp->sb_running_index[j],
1019 (j == HC_SB_MAX_SM - 1) ? ")" : " ");
1021 BNX2X_ERR(" indexes (");
1022 for (j = 0; j < loop; j++)
1024 fp->sb_index_values[j],
1025 (j == loop - 1) ? ")" : " ");
1027 /* VF cannot access FW refelection for status block */
1032 data_size = CHIP_IS_E1x(bp) ?
1033 sizeof(struct hc_status_block_data_e1x) :
1034 sizeof(struct hc_status_block_data_e2);
1035 data_size /= sizeof(u32);
1036 sb_data_p = CHIP_IS_E1x(bp) ?
1037 (u32 *)&sb_data_e1x :
1039 /* copy sb data in here */
1040 for (j = 0; j < data_size; j++)
1041 *(sb_data_p + j) = REG_RD(bp, BAR_CSTRORM_INTMEM +
1042 CSTORM_STATUS_BLOCK_DATA_OFFSET(fp->fw_sb_id) +
1045 if (!CHIP_IS_E1x(bp)) {
1046 pr_cont("pf_id(0x%x) vf_id(0x%x) vf_valid(0x%x) vnic_id(0x%x) same_igu_sb_1b(0x%x) state(0x%x)\n",
1047 sb_data_e2.common.p_func.pf_id,
1048 sb_data_e2.common.p_func.vf_id,
1049 sb_data_e2.common.p_func.vf_valid,
1050 sb_data_e2.common.p_func.vnic_id,
1051 sb_data_e2.common.same_igu_sb_1b,
1052 sb_data_e2.common.state);
1054 pr_cont("pf_id(0x%x) vf_id(0x%x) vf_valid(0x%x) vnic_id(0x%x) same_igu_sb_1b(0x%x) state(0x%x)\n",
1055 sb_data_e1x.common.p_func.pf_id,
1056 sb_data_e1x.common.p_func.vf_id,
1057 sb_data_e1x.common.p_func.vf_valid,
1058 sb_data_e1x.common.p_func.vnic_id,
1059 sb_data_e1x.common.same_igu_sb_1b,
1060 sb_data_e1x.common.state);
1064 for (j = 0; j < HC_SB_MAX_SM; j++) {
1065 pr_cont("SM[%d] __flags (0x%x) igu_sb_id (0x%x) igu_seg_id(0x%x) time_to_expire (0x%x) timer_value(0x%x)\n",
1066 j, hc_sm_p[j].__flags,
1067 hc_sm_p[j].igu_sb_id,
1068 hc_sm_p[j].igu_seg_id,
1069 hc_sm_p[j].time_to_expire,
1070 hc_sm_p[j].timer_value);
1074 for (j = 0; j < loop; j++) {
1075 pr_cont("INDEX[%d] flags (0x%x) timeout (0x%x)\n", j,
1076 hc_index_p[j].flags,
1077 hc_index_p[j].timeout);
1081 #ifdef BNX2X_STOP_ON_ERROR
1084 BNX2X_ERR("eq cons %x prod %x\n", bp->eq_cons, bp->eq_prod);
1085 for (i = 0; i < NUM_EQ_DESC; i++) {
1086 u32 *data = (u32 *)&bp->eq_ring[i].message.data;
1088 BNX2X_ERR("event queue [%d]: header: opcode %d, error %d\n",
1089 i, bp->eq_ring[i].message.opcode,
1090 bp->eq_ring[i].message.error);
1091 BNX2X_ERR("data: %x %x %x\n",
1092 data[0], data[1], data[2]);
1098 for_each_valid_rx_queue(bp, i) {
1099 struct bnx2x_fastpath *fp = &bp->fp[i];
1104 if (!fp->rx_cons_sb)
1107 start = RX_BD(le16_to_cpu(*fp->rx_cons_sb) - 10);
1108 end = RX_BD(le16_to_cpu(*fp->rx_cons_sb) + 503);
1109 for (j = start; j != end; j = RX_BD(j + 1)) {
1110 u32 *rx_bd = (u32 *)&fp->rx_desc_ring[j];
1111 struct sw_rx_bd *sw_bd = &fp->rx_buf_ring[j];
1113 BNX2X_ERR("fp%d: rx_bd[%x]=[%x:%x] sw_bd=[%p]\n",
1114 i, j, rx_bd[1], rx_bd[0], sw_bd->data);
1117 start = RX_SGE(fp->rx_sge_prod);
1118 end = RX_SGE(fp->last_max_sge);
1119 for (j = start; j != end; j = RX_SGE(j + 1)) {
1120 u32 *rx_sge = (u32 *)&fp->rx_sge_ring[j];
1121 struct sw_rx_page *sw_page = &fp->rx_page_ring[j];
1123 BNX2X_ERR("fp%d: rx_sge[%x]=[%x:%x] sw_page=[%p]\n",
1124 i, j, rx_sge[1], rx_sge[0], sw_page->page);
1127 start = RCQ_BD(fp->rx_comp_cons - 10);
1128 end = RCQ_BD(fp->rx_comp_cons + 503);
1129 for (j = start; j != end; j = RCQ_BD(j + 1)) {
1130 u32 *cqe = (u32 *)&fp->rx_comp_ring[j];
1132 BNX2X_ERR("fp%d: cqe[%x]=[%x:%x:%x:%x]\n",
1133 i, j, cqe[0], cqe[1], cqe[2], cqe[3]);
1138 for_each_valid_tx_queue(bp, i) {
1139 struct bnx2x_fastpath *fp = &bp->fp[i];
1144 for_each_cos_in_tx_queue(fp, cos) {
1145 struct bnx2x_fp_txdata *txdata = fp->txdata_ptr[cos];
1147 if (!fp->txdata_ptr[cos])
1150 if (!txdata->tx_cons_sb)
1153 start = TX_BD(le16_to_cpu(*txdata->tx_cons_sb) - 10);
1154 end = TX_BD(le16_to_cpu(*txdata->tx_cons_sb) + 245);
1155 for (j = start; j != end; j = TX_BD(j + 1)) {
1156 struct sw_tx_bd *sw_bd =
1157 &txdata->tx_buf_ring[j];
1159 BNX2X_ERR("fp%d: txdata %d, packet[%x]=[%p,%x]\n",
1160 i, cos, j, sw_bd->skb,
1164 start = TX_BD(txdata->tx_bd_cons - 10);
1165 end = TX_BD(txdata->tx_bd_cons + 254);
1166 for (j = start; j != end; j = TX_BD(j + 1)) {
1167 u32 *tx_bd = (u32 *)&txdata->tx_desc_ring[j];
1169 BNX2X_ERR("fp%d: txdata %d, tx_bd[%x]=[%x:%x:%x:%x]\n",
1170 i, cos, j, tx_bd[0], tx_bd[1],
1171 tx_bd[2], tx_bd[3]);
1178 bnx2x_mc_assert(bp);
1180 BNX2X_ERR("end crash dump -----------------\n");
1184 * FLR Support for E2
1186 * bnx2x_pf_flr_clnup() is called during nic_load in the per function HW
1189 #define FLR_WAIT_USEC 10000 /* 10 milliseconds */
1190 #define FLR_WAIT_INTERVAL 50 /* usec */
1191 #define FLR_POLL_CNT (FLR_WAIT_USEC/FLR_WAIT_INTERVAL) /* 200 */
1193 struct pbf_pN_buf_regs {
1200 struct pbf_pN_cmd_regs {
1206 static void bnx2x_pbf_pN_buf_flushed(struct bnx2x *bp,
1207 struct pbf_pN_buf_regs *regs,
1210 u32 init_crd, crd, crd_start, crd_freed, crd_freed_start;
1211 u32 cur_cnt = poll_count;
1213 crd_freed = crd_freed_start = REG_RD(bp, regs->crd_freed);
1214 crd = crd_start = REG_RD(bp, regs->crd);
1215 init_crd = REG_RD(bp, regs->init_crd);
1217 DP(BNX2X_MSG_SP, "INIT CREDIT[%d] : %x\n", regs->pN, init_crd);
1218 DP(BNX2X_MSG_SP, "CREDIT[%d] : s:%x\n", regs->pN, crd);
1219 DP(BNX2X_MSG_SP, "CREDIT_FREED[%d]: s:%x\n", regs->pN, crd_freed);
1221 while ((crd != init_crd) && ((u32)SUB_S32(crd_freed, crd_freed_start) <
1222 (init_crd - crd_start))) {
1224 udelay(FLR_WAIT_INTERVAL);
1225 crd = REG_RD(bp, regs->crd);
1226 crd_freed = REG_RD(bp, regs->crd_freed);
1228 DP(BNX2X_MSG_SP, "PBF tx buffer[%d] timed out\n",
1230 DP(BNX2X_MSG_SP, "CREDIT[%d] : c:%x\n",
1232 DP(BNX2X_MSG_SP, "CREDIT_FREED[%d]: c:%x\n",
1233 regs->pN, crd_freed);
1237 DP(BNX2X_MSG_SP, "Waited %d*%d usec for PBF tx buffer[%d]\n",
1238 poll_count-cur_cnt, FLR_WAIT_INTERVAL, regs->pN);
1241 static void bnx2x_pbf_pN_cmd_flushed(struct bnx2x *bp,
1242 struct pbf_pN_cmd_regs *regs,
1245 u32 occup, to_free, freed, freed_start;
1246 u32 cur_cnt = poll_count;
1248 occup = to_free = REG_RD(bp, regs->lines_occup);
1249 freed = freed_start = REG_RD(bp, regs->lines_freed);
1251 DP(BNX2X_MSG_SP, "OCCUPANCY[%d] : s:%x\n", regs->pN, occup);
1252 DP(BNX2X_MSG_SP, "LINES_FREED[%d] : s:%x\n", regs->pN, freed);
1254 while (occup && ((u32)SUB_S32(freed, freed_start) < to_free)) {
1256 udelay(FLR_WAIT_INTERVAL);
1257 occup = REG_RD(bp, regs->lines_occup);
1258 freed = REG_RD(bp, regs->lines_freed);
1260 DP(BNX2X_MSG_SP, "PBF cmd queue[%d] timed out\n",
1262 DP(BNX2X_MSG_SP, "OCCUPANCY[%d] : s:%x\n",
1264 DP(BNX2X_MSG_SP, "LINES_FREED[%d] : s:%x\n",
1269 DP(BNX2X_MSG_SP, "Waited %d*%d usec for PBF cmd queue[%d]\n",
1270 poll_count-cur_cnt, FLR_WAIT_INTERVAL, regs->pN);
1273 static u32 bnx2x_flr_clnup_reg_poll(struct bnx2x *bp, u32 reg,
1274 u32 expected, u32 poll_count)
1276 u32 cur_cnt = poll_count;
1279 while ((val = REG_RD(bp, reg)) != expected && cur_cnt--)
1280 udelay(FLR_WAIT_INTERVAL);
1285 int bnx2x_flr_clnup_poll_hw_counter(struct bnx2x *bp, u32 reg,
1286 char *msg, u32 poll_cnt)
1288 u32 val = bnx2x_flr_clnup_reg_poll(bp, reg, 0, poll_cnt);
1290 BNX2X_ERR("%s usage count=%d\n", msg, val);
1296 /* Common routines with VF FLR cleanup */
1297 u32 bnx2x_flr_clnup_poll_count(struct bnx2x *bp)
1299 /* adjust polling timeout */
1300 if (CHIP_REV_IS_EMUL(bp))
1301 return FLR_POLL_CNT * 2000;
1303 if (CHIP_REV_IS_FPGA(bp))
1304 return FLR_POLL_CNT * 120;
1306 return FLR_POLL_CNT;
1309 void bnx2x_tx_hw_flushed(struct bnx2x *bp, u32 poll_count)
1311 struct pbf_pN_cmd_regs cmd_regs[] = {
1312 {0, (CHIP_IS_E3B0(bp)) ?
1313 PBF_REG_TQ_OCCUPANCY_Q0 :
1314 PBF_REG_P0_TQ_OCCUPANCY,
1315 (CHIP_IS_E3B0(bp)) ?
1316 PBF_REG_TQ_LINES_FREED_CNT_Q0 :
1317 PBF_REG_P0_TQ_LINES_FREED_CNT},
1318 {1, (CHIP_IS_E3B0(bp)) ?
1319 PBF_REG_TQ_OCCUPANCY_Q1 :
1320 PBF_REG_P1_TQ_OCCUPANCY,
1321 (CHIP_IS_E3B0(bp)) ?
1322 PBF_REG_TQ_LINES_FREED_CNT_Q1 :
1323 PBF_REG_P1_TQ_LINES_FREED_CNT},
1324 {4, (CHIP_IS_E3B0(bp)) ?
1325 PBF_REG_TQ_OCCUPANCY_LB_Q :
1326 PBF_REG_P4_TQ_OCCUPANCY,
1327 (CHIP_IS_E3B0(bp)) ?
1328 PBF_REG_TQ_LINES_FREED_CNT_LB_Q :
1329 PBF_REG_P4_TQ_LINES_FREED_CNT}
1332 struct pbf_pN_buf_regs buf_regs[] = {
1333 {0, (CHIP_IS_E3B0(bp)) ?
1334 PBF_REG_INIT_CRD_Q0 :
1335 PBF_REG_P0_INIT_CRD ,
1336 (CHIP_IS_E3B0(bp)) ?
1339 (CHIP_IS_E3B0(bp)) ?
1340 PBF_REG_INTERNAL_CRD_FREED_CNT_Q0 :
1341 PBF_REG_P0_INTERNAL_CRD_FREED_CNT},
1342 {1, (CHIP_IS_E3B0(bp)) ?
1343 PBF_REG_INIT_CRD_Q1 :
1344 PBF_REG_P1_INIT_CRD,
1345 (CHIP_IS_E3B0(bp)) ?
1348 (CHIP_IS_E3B0(bp)) ?
1349 PBF_REG_INTERNAL_CRD_FREED_CNT_Q1 :
1350 PBF_REG_P1_INTERNAL_CRD_FREED_CNT},
1351 {4, (CHIP_IS_E3B0(bp)) ?
1352 PBF_REG_INIT_CRD_LB_Q :
1353 PBF_REG_P4_INIT_CRD,
1354 (CHIP_IS_E3B0(bp)) ?
1355 PBF_REG_CREDIT_LB_Q :
1357 (CHIP_IS_E3B0(bp)) ?
1358 PBF_REG_INTERNAL_CRD_FREED_CNT_LB_Q :
1359 PBF_REG_P4_INTERNAL_CRD_FREED_CNT},
1364 /* Verify the command queues are flushed P0, P1, P4 */
1365 for (i = 0; i < ARRAY_SIZE(cmd_regs); i++)
1366 bnx2x_pbf_pN_cmd_flushed(bp, &cmd_regs[i], poll_count);
1368 /* Verify the transmission buffers are flushed P0, P1, P4 */
1369 for (i = 0; i < ARRAY_SIZE(buf_regs); i++)
1370 bnx2x_pbf_pN_buf_flushed(bp, &buf_regs[i], poll_count);
1373 #define OP_GEN_PARAM(param) \
1374 (((param) << SDM_OP_GEN_COMP_PARAM_SHIFT) & SDM_OP_GEN_COMP_PARAM)
1376 #define OP_GEN_TYPE(type) \
1377 (((type) << SDM_OP_GEN_COMP_TYPE_SHIFT) & SDM_OP_GEN_COMP_TYPE)
1379 #define OP_GEN_AGG_VECT(index) \
1380 (((index) << SDM_OP_GEN_AGG_VECT_IDX_SHIFT) & SDM_OP_GEN_AGG_VECT_IDX)
1382 int bnx2x_send_final_clnup(struct bnx2x *bp, u8 clnup_func, u32 poll_cnt)
1384 u32 op_gen_command = 0;
1385 u32 comp_addr = BAR_CSTRORM_INTMEM +
1386 CSTORM_FINAL_CLEANUP_COMPLETE_OFFSET(clnup_func);
1389 if (REG_RD(bp, comp_addr)) {
1390 BNX2X_ERR("Cleanup complete was not 0 before sending\n");
1394 op_gen_command |= OP_GEN_PARAM(XSTORM_AGG_INT_FINAL_CLEANUP_INDEX);
1395 op_gen_command |= OP_GEN_TYPE(XSTORM_AGG_INT_FINAL_CLEANUP_COMP_TYPE);
1396 op_gen_command |= OP_GEN_AGG_VECT(clnup_func);
1397 op_gen_command |= 1 << SDM_OP_GEN_AGG_VECT_IDX_VALID_SHIFT;
1399 DP(BNX2X_MSG_SP, "sending FW Final cleanup\n");
1400 REG_WR(bp, XSDM_REG_OPERATION_GEN, op_gen_command);
1402 if (bnx2x_flr_clnup_reg_poll(bp, comp_addr, 1, poll_cnt) != 1) {
1403 BNX2X_ERR("FW final cleanup did not succeed\n");
1404 DP(BNX2X_MSG_SP, "At timeout completion address contained %x\n",
1405 (REG_RD(bp, comp_addr)));
1409 /* Zero completion for next FLR */
1410 REG_WR(bp, comp_addr, 0);
1415 u8 bnx2x_is_pcie_pending(struct pci_dev *dev)
1419 pcie_capability_read_word(dev, PCI_EXP_DEVSTA, &status);
1420 return status & PCI_EXP_DEVSTA_TRPND;
1423 /* PF FLR specific routines
1425 static int bnx2x_poll_hw_usage_counters(struct bnx2x *bp, u32 poll_cnt)
1427 /* wait for CFC PF usage-counter to zero (includes all the VFs) */
1428 if (bnx2x_flr_clnup_poll_hw_counter(bp,
1429 CFC_REG_NUM_LCIDS_INSIDE_PF,
1430 "CFC PF usage counter timed out",
1434 /* Wait for DQ PF usage-counter to zero (until DQ cleanup) */
1435 if (bnx2x_flr_clnup_poll_hw_counter(bp,
1436 DORQ_REG_PF_USAGE_CNT,
1437 "DQ PF usage counter timed out",
1441 /* Wait for QM PF usage-counter to zero (until DQ cleanup) */
1442 if (bnx2x_flr_clnup_poll_hw_counter(bp,
1443 QM_REG_PF_USG_CNT_0 + 4*BP_FUNC(bp),
1444 "QM PF usage counter timed out",
1448 /* Wait for Timer PF usage-counters to zero (until DQ cleanup) */
1449 if (bnx2x_flr_clnup_poll_hw_counter(bp,
1450 TM_REG_LIN0_VNIC_UC + 4*BP_PORT(bp),
1451 "Timers VNIC usage counter timed out",
1454 if (bnx2x_flr_clnup_poll_hw_counter(bp,
1455 TM_REG_LIN0_NUM_SCANS + 4*BP_PORT(bp),
1456 "Timers NUM_SCANS usage counter timed out",
1460 /* Wait DMAE PF usage counter to zero */
1461 if (bnx2x_flr_clnup_poll_hw_counter(bp,
1462 dmae_reg_go_c[INIT_DMAE_C(bp)],
1463 "DMAE command register timed out",
1470 static void bnx2x_hw_enable_status(struct bnx2x *bp)
1474 val = REG_RD(bp, CFC_REG_WEAK_ENABLE_PF);
1475 DP(BNX2X_MSG_SP, "CFC_REG_WEAK_ENABLE_PF is 0x%x\n", val);
1477 val = REG_RD(bp, PBF_REG_DISABLE_PF);
1478 DP(BNX2X_MSG_SP, "PBF_REG_DISABLE_PF is 0x%x\n", val);
1480 val = REG_RD(bp, IGU_REG_PCI_PF_MSI_EN);
1481 DP(BNX2X_MSG_SP, "IGU_REG_PCI_PF_MSI_EN is 0x%x\n", val);
1483 val = REG_RD(bp, IGU_REG_PCI_PF_MSIX_EN);
1484 DP(BNX2X_MSG_SP, "IGU_REG_PCI_PF_MSIX_EN is 0x%x\n", val);
1486 val = REG_RD(bp, IGU_REG_PCI_PF_MSIX_FUNC_MASK);
1487 DP(BNX2X_MSG_SP, "IGU_REG_PCI_PF_MSIX_FUNC_MASK is 0x%x\n", val);
1489 val = REG_RD(bp, PGLUE_B_REG_SHADOW_BME_PF_7_0_CLR);
1490 DP(BNX2X_MSG_SP, "PGLUE_B_REG_SHADOW_BME_PF_7_0_CLR is 0x%x\n", val);
1492 val = REG_RD(bp, PGLUE_B_REG_FLR_REQUEST_PF_7_0_CLR);
1493 DP(BNX2X_MSG_SP, "PGLUE_B_REG_FLR_REQUEST_PF_7_0_CLR is 0x%x\n", val);
1495 val = REG_RD(bp, PGLUE_B_REG_INTERNAL_PFID_ENABLE_MASTER);
1496 DP(BNX2X_MSG_SP, "PGLUE_B_REG_INTERNAL_PFID_ENABLE_MASTER is 0x%x\n",
1500 static int bnx2x_pf_flr_clnup(struct bnx2x *bp)
1502 u32 poll_cnt = bnx2x_flr_clnup_poll_count(bp);
1504 DP(BNX2X_MSG_SP, "Cleanup after FLR PF[%d]\n", BP_ABS_FUNC(bp));
1506 /* Re-enable PF target read access */
1507 REG_WR(bp, PGLUE_B_REG_INTERNAL_PFID_ENABLE_TARGET_READ, 1);
1509 /* Poll HW usage counters */
1510 DP(BNX2X_MSG_SP, "Polling usage counters\n");
1511 if (bnx2x_poll_hw_usage_counters(bp, poll_cnt))
1514 /* Zero the igu 'trailing edge' and 'leading edge' */
1516 /* Send the FW cleanup command */
1517 if (bnx2x_send_final_clnup(bp, (u8)BP_FUNC(bp), poll_cnt))
1522 /* Verify TX hw is flushed */
1523 bnx2x_tx_hw_flushed(bp, poll_cnt);
1525 /* Wait 100ms (not adjusted according to platform) */
1528 /* Verify no pending pci transactions */
1529 if (bnx2x_is_pcie_pending(bp->pdev))
1530 BNX2X_ERR("PCIE Transactions still pending\n");
1533 bnx2x_hw_enable_status(bp);
1536 * Master enable - Due to WB DMAE writes performed before this
1537 * register is re-initialized as part of the regular function init
1539 REG_WR(bp, PGLUE_B_REG_INTERNAL_PFID_ENABLE_MASTER, 1);
1544 static void bnx2x_hc_int_enable(struct bnx2x *bp)
1546 int port = BP_PORT(bp);
1547 u32 addr = port ? HC_REG_CONFIG_1 : HC_REG_CONFIG_0;
1548 u32 val = REG_RD(bp, addr);
1549 bool msix = (bp->flags & USING_MSIX_FLAG) ? true : false;
1550 bool single_msix = (bp->flags & USING_SINGLE_MSIX_FLAG) ? true : false;
1551 bool msi = (bp->flags & USING_MSI_FLAG) ? true : false;
1554 val &= ~(HC_CONFIG_0_REG_SINGLE_ISR_EN_0 |
1555 HC_CONFIG_0_REG_INT_LINE_EN_0);
1556 val |= (HC_CONFIG_0_REG_MSI_MSIX_INT_EN_0 |
1557 HC_CONFIG_0_REG_ATTN_BIT_EN_0);
1559 val |= HC_CONFIG_0_REG_SINGLE_ISR_EN_0;
1561 val &= ~HC_CONFIG_0_REG_INT_LINE_EN_0;
1562 val |= (HC_CONFIG_0_REG_SINGLE_ISR_EN_0 |
1563 HC_CONFIG_0_REG_MSI_MSIX_INT_EN_0 |
1564 HC_CONFIG_0_REG_ATTN_BIT_EN_0);
1566 val |= (HC_CONFIG_0_REG_SINGLE_ISR_EN_0 |
1567 HC_CONFIG_0_REG_MSI_MSIX_INT_EN_0 |
1568 HC_CONFIG_0_REG_INT_LINE_EN_0 |
1569 HC_CONFIG_0_REG_ATTN_BIT_EN_0);
1571 if (!CHIP_IS_E1(bp)) {
1573 "write %x to HC %d (addr 0x%x)\n", val, port, addr);
1575 REG_WR(bp, addr, val);
1577 val &= ~HC_CONFIG_0_REG_MSI_MSIX_INT_EN_0;
1582 REG_WR(bp, HC_REG_INT_MASK + port*4, 0x1FFFF);
1585 "write %x to HC %d (addr 0x%x) mode %s\n", val, port, addr,
1586 (msix ? "MSI-X" : (msi ? "MSI" : "INTx")));
1588 REG_WR(bp, addr, val);
1590 * Ensure that HC_CONFIG is written before leading/trailing edge config
1594 if (!CHIP_IS_E1(bp)) {
1595 /* init leading/trailing edge */
1597 val = (0xee0f | (1 << (BP_VN(bp) + 4)));
1599 /* enable nig and gpio3 attention */
1604 REG_WR(bp, HC_REG_TRAILING_EDGE_0 + port*8, val);
1605 REG_WR(bp, HC_REG_LEADING_EDGE_0 + port*8, val);
1609 static void bnx2x_igu_int_enable(struct bnx2x *bp)
1612 bool msix = (bp->flags & USING_MSIX_FLAG) ? true : false;
1613 bool single_msix = (bp->flags & USING_SINGLE_MSIX_FLAG) ? true : false;
1614 bool msi = (bp->flags & USING_MSI_FLAG) ? true : false;
1616 val = REG_RD(bp, IGU_REG_PF_CONFIGURATION);
1619 val &= ~(IGU_PF_CONF_INT_LINE_EN |
1620 IGU_PF_CONF_SINGLE_ISR_EN);
1621 val |= (IGU_PF_CONF_MSI_MSIX_EN |
1622 IGU_PF_CONF_ATTN_BIT_EN);
1625 val |= IGU_PF_CONF_SINGLE_ISR_EN;
1627 val &= ~IGU_PF_CONF_INT_LINE_EN;
1628 val |= (IGU_PF_CONF_MSI_MSIX_EN |
1629 IGU_PF_CONF_ATTN_BIT_EN |
1630 IGU_PF_CONF_SINGLE_ISR_EN);
1632 val &= ~IGU_PF_CONF_MSI_MSIX_EN;
1633 val |= (IGU_PF_CONF_INT_LINE_EN |
1634 IGU_PF_CONF_ATTN_BIT_EN |
1635 IGU_PF_CONF_SINGLE_ISR_EN);
1638 /* Clean previous status - need to configure igu prior to ack*/
1639 if ((!msix) || single_msix) {
1640 REG_WR(bp, IGU_REG_PF_CONFIGURATION, val);
1644 val |= IGU_PF_CONF_FUNC_EN;
1646 DP(NETIF_MSG_IFUP, "write 0x%x to IGU mode %s\n",
1647 val, (msix ? "MSI-X" : (msi ? "MSI" : "INTx")));
1649 REG_WR(bp, IGU_REG_PF_CONFIGURATION, val);
1651 if (val & IGU_PF_CONF_INT_LINE_EN)
1652 pci_intx(bp->pdev, true);
1656 /* init leading/trailing edge */
1658 val = (0xee0f | (1 << (BP_VN(bp) + 4)));
1660 /* enable nig and gpio3 attention */
1665 REG_WR(bp, IGU_REG_TRAILING_EDGE_LATCH, val);
1666 REG_WR(bp, IGU_REG_LEADING_EDGE_LATCH, val);
1669 void bnx2x_int_enable(struct bnx2x *bp)
1671 if (bp->common.int_block == INT_BLOCK_HC)
1672 bnx2x_hc_int_enable(bp);
1674 bnx2x_igu_int_enable(bp);
1677 void bnx2x_int_disable_sync(struct bnx2x *bp, int disable_hw)
1679 int msix = (bp->flags & USING_MSIX_FLAG) ? 1 : 0;
1683 /* prevent the HW from sending interrupts */
1684 bnx2x_int_disable(bp);
1686 /* make sure all ISRs are done */
1688 synchronize_irq(bp->msix_table[0].vector);
1690 if (CNIC_SUPPORT(bp))
1692 for_each_eth_queue(bp, i)
1693 synchronize_irq(bp->msix_table[offset++].vector);
1695 synchronize_irq(bp->pdev->irq);
1697 /* make sure sp_task is not running */
1698 cancel_delayed_work(&bp->sp_task);
1699 cancel_delayed_work(&bp->period_task);
1700 flush_workqueue(bnx2x_wq);
1706 * General service functions
1709 /* Return true if succeeded to acquire the lock */
1710 static bool bnx2x_trylock_hw_lock(struct bnx2x *bp, u32 resource)
1713 u32 resource_bit = (1 << resource);
1714 int func = BP_FUNC(bp);
1715 u32 hw_lock_control_reg;
1717 DP(NETIF_MSG_HW | NETIF_MSG_IFUP,
1718 "Trying to take a lock on resource %d\n", resource);
1720 /* Validating that the resource is within range */
1721 if (resource > HW_LOCK_MAX_RESOURCE_VALUE) {
1722 DP(NETIF_MSG_HW | NETIF_MSG_IFUP,
1723 "resource(0x%x) > HW_LOCK_MAX_RESOURCE_VALUE(0x%x)\n",
1724 resource, HW_LOCK_MAX_RESOURCE_VALUE);
1729 hw_lock_control_reg = (MISC_REG_DRIVER_CONTROL_1 + func*8);
1731 hw_lock_control_reg =
1732 (MISC_REG_DRIVER_CONTROL_7 + (func - 6)*8);
1734 /* Try to acquire the lock */
1735 REG_WR(bp, hw_lock_control_reg + 4, resource_bit);
1736 lock_status = REG_RD(bp, hw_lock_control_reg);
1737 if (lock_status & resource_bit)
1740 DP(NETIF_MSG_HW | NETIF_MSG_IFUP,
1741 "Failed to get a lock on resource %d\n", resource);
1746 * bnx2x_get_leader_lock_resource - get the recovery leader resource id
1748 * @bp: driver handle
1750 * Returns the recovery leader resource id according to the engine this function
1751 * belongs to. Currently only only 2 engines is supported.
1753 static int bnx2x_get_leader_lock_resource(struct bnx2x *bp)
1756 return HW_LOCK_RESOURCE_RECOVERY_LEADER_1;
1758 return HW_LOCK_RESOURCE_RECOVERY_LEADER_0;
1762 * bnx2x_trylock_leader_lock- try to acquire a leader lock.
1764 * @bp: driver handle
1766 * Tries to acquire a leader lock for current engine.
1768 static bool bnx2x_trylock_leader_lock(struct bnx2x *bp)
1770 return bnx2x_trylock_hw_lock(bp, bnx2x_get_leader_lock_resource(bp));
1773 static void bnx2x_cnic_cfc_comp(struct bnx2x *bp, int cid, u8 err);
1775 /* schedule the sp task and mark that interrupt occurred (runs from ISR) */
1776 static int bnx2x_schedule_sp_task(struct bnx2x *bp)
1778 /* Set the interrupt occurred bit for the sp-task to recognize it
1779 * must ack the interrupt and transition according to the IGU
1782 atomic_set(&bp->interrupt_occurred, 1);
1784 /* The sp_task must execute only after this bit
1785 * is set, otherwise we will get out of sync and miss all
1786 * further interrupts. Hence, the barrier.
1790 /* schedule sp_task to workqueue */
1791 return queue_delayed_work(bnx2x_wq, &bp->sp_task, 0);
1794 void bnx2x_sp_event(struct bnx2x_fastpath *fp, union eth_rx_cqe *rr_cqe)
1796 struct bnx2x *bp = fp->bp;
1797 int cid = SW_CID(rr_cqe->ramrod_cqe.conn_and_cmd_data);
1798 int command = CQE_CMD(rr_cqe->ramrod_cqe.conn_and_cmd_data);
1799 enum bnx2x_queue_cmd drv_cmd = BNX2X_Q_CMD_MAX;
1800 struct bnx2x_queue_sp_obj *q_obj = &bnx2x_sp_obj(bp, fp).q_obj;
1803 "fp %d cid %d got ramrod #%d state is %x type is %d\n",
1804 fp->index, cid, command, bp->state,
1805 rr_cqe->ramrod_cqe.ramrod_type);
1807 /* If cid is within VF range, replace the slowpath object with the
1808 * one corresponding to this VF
1810 if (cid >= BNX2X_FIRST_VF_CID &&
1811 cid < BNX2X_FIRST_VF_CID + BNX2X_VF_CIDS)
1812 bnx2x_iov_set_queue_sp_obj(bp, cid, &q_obj);
1815 case (RAMROD_CMD_ID_ETH_CLIENT_UPDATE):
1816 DP(BNX2X_MSG_SP, "got UPDATE ramrod. CID %d\n", cid);
1817 drv_cmd = BNX2X_Q_CMD_UPDATE;
1820 case (RAMROD_CMD_ID_ETH_CLIENT_SETUP):
1821 DP(BNX2X_MSG_SP, "got MULTI[%d] setup ramrod\n", cid);
1822 drv_cmd = BNX2X_Q_CMD_SETUP;
1825 case (RAMROD_CMD_ID_ETH_TX_QUEUE_SETUP):
1826 DP(BNX2X_MSG_SP, "got MULTI[%d] tx-only setup ramrod\n", cid);
1827 drv_cmd = BNX2X_Q_CMD_SETUP_TX_ONLY;
1830 case (RAMROD_CMD_ID_ETH_HALT):
1831 DP(BNX2X_MSG_SP, "got MULTI[%d] halt ramrod\n", cid);
1832 drv_cmd = BNX2X_Q_CMD_HALT;
1835 case (RAMROD_CMD_ID_ETH_TERMINATE):
1836 DP(BNX2X_MSG_SP, "got MULTI[%d] terminate ramrod\n", cid);
1837 drv_cmd = BNX2X_Q_CMD_TERMINATE;
1840 case (RAMROD_CMD_ID_ETH_EMPTY):
1841 DP(BNX2X_MSG_SP, "got MULTI[%d] empty ramrod\n", cid);
1842 drv_cmd = BNX2X_Q_CMD_EMPTY;
1845 case (RAMROD_CMD_ID_ETH_TPA_UPDATE):
1846 DP(BNX2X_MSG_SP, "got tpa update ramrod CID=%d\n", cid);
1847 drv_cmd = BNX2X_Q_CMD_UPDATE_TPA;
1851 BNX2X_ERR("unexpected MC reply (%d) on fp[%d]\n",
1852 command, fp->index);
1856 if ((drv_cmd != BNX2X_Q_CMD_MAX) &&
1857 q_obj->complete_cmd(bp, q_obj, drv_cmd))
1858 /* q_obj->complete_cmd() failure means that this was
1859 * an unexpected completion.
1861 * In this case we don't want to increase the bp->spq_left
1862 * because apparently we haven't sent this command the first
1865 #ifdef BNX2X_STOP_ON_ERROR
1871 smp_mb__before_atomic();
1872 atomic_inc(&bp->cq_spq_left);
1873 /* push the change in bp->spq_left and towards the memory */
1874 smp_mb__after_atomic();
1876 DP(BNX2X_MSG_SP, "bp->cq_spq_left %x\n", atomic_read(&bp->cq_spq_left));
1878 if ((drv_cmd == BNX2X_Q_CMD_UPDATE) && (IS_FCOE_FP(fp)) &&
1879 (!!test_bit(BNX2X_AFEX_FCOE_Q_UPDATE_PENDING, &bp->sp_state))) {
1880 /* if Q update ramrod is completed for last Q in AFEX vif set
1881 * flow, then ACK MCP at the end
1883 * mark pending ACK to MCP bit.
1884 * prevent case that both bits are cleared.
1885 * At the end of load/unload driver checks that
1886 * sp_state is cleared, and this order prevents
1889 smp_mb__before_atomic();
1890 set_bit(BNX2X_AFEX_PENDING_VIFSET_MCP_ACK, &bp->sp_state);
1892 clear_bit(BNX2X_AFEX_FCOE_Q_UPDATE_PENDING, &bp->sp_state);
1893 smp_mb__after_atomic();
1895 /* schedule the sp task as mcp ack is required */
1896 bnx2x_schedule_sp_task(bp);
1902 irqreturn_t bnx2x_interrupt(int irq, void *dev_instance)
1904 struct bnx2x *bp = netdev_priv(dev_instance);
1905 u16 status = bnx2x_ack_int(bp);
1910 /* Return here if interrupt is shared and it's not for us */
1911 if (unlikely(status == 0)) {
1912 DP(NETIF_MSG_INTR, "not our interrupt!\n");
1915 DP(NETIF_MSG_INTR, "got an interrupt status 0x%x\n", status);
1917 #ifdef BNX2X_STOP_ON_ERROR
1918 if (unlikely(bp->panic))
1922 for_each_eth_queue(bp, i) {
1923 struct bnx2x_fastpath *fp = &bp->fp[i];
1925 mask = 0x2 << (fp->index + CNIC_SUPPORT(bp));
1926 if (status & mask) {
1927 /* Handle Rx or Tx according to SB id */
1928 for_each_cos_in_tx_queue(fp, cos)
1929 prefetch(fp->txdata_ptr[cos]->tx_cons_sb);
1930 prefetch(&fp->sb_running_index[SM_RX_ID]);
1931 napi_schedule_irqoff(&bnx2x_fp(bp, fp->index, napi));
1936 if (CNIC_SUPPORT(bp)) {
1938 if (status & (mask | 0x1)) {
1939 struct cnic_ops *c_ops = NULL;
1942 c_ops = rcu_dereference(bp->cnic_ops);
1943 if (c_ops && (bp->cnic_eth_dev.drv_state &
1944 CNIC_DRV_STATE_HANDLES_IRQ))
1945 c_ops->cnic_handler(bp->cnic_data, NULL);
1952 if (unlikely(status & 0x1)) {
1954 /* schedule sp task to perform default status block work, ack
1955 * attentions and enable interrupts.
1957 bnx2x_schedule_sp_task(bp);
1964 if (unlikely(status))
1965 DP(NETIF_MSG_INTR, "got an unknown interrupt! (status 0x%x)\n",
1974 * General service functions
1977 int bnx2x_acquire_hw_lock(struct bnx2x *bp, u32 resource)
1980 u32 resource_bit = (1 << resource);
1981 int func = BP_FUNC(bp);
1982 u32 hw_lock_control_reg;
1985 /* Validating that the resource is within range */
1986 if (resource > HW_LOCK_MAX_RESOURCE_VALUE) {
1987 BNX2X_ERR("resource(0x%x) > HW_LOCK_MAX_RESOURCE_VALUE(0x%x)\n",
1988 resource, HW_LOCK_MAX_RESOURCE_VALUE);
1993 hw_lock_control_reg = (MISC_REG_DRIVER_CONTROL_1 + func*8);
1995 hw_lock_control_reg =
1996 (MISC_REG_DRIVER_CONTROL_7 + (func - 6)*8);
1999 /* Validating that the resource is not already taken */
2000 lock_status = REG_RD(bp, hw_lock_control_reg);
2001 if (lock_status & resource_bit) {
2002 BNX2X_ERR("lock_status 0x%x resource_bit 0x%x\n",
2003 lock_status, resource_bit);
2007 /* Try for 5 second every 5ms */
2008 for (cnt = 0; cnt < 1000; cnt++) {
2009 /* Try to acquire the lock */
2010 REG_WR(bp, hw_lock_control_reg + 4, resource_bit);
2011 lock_status = REG_RD(bp, hw_lock_control_reg);
2012 if (lock_status & resource_bit)
2015 usleep_range(5000, 10000);
2017 BNX2X_ERR("Timeout\n");
2021 int bnx2x_release_leader_lock(struct bnx2x *bp)
2023 return bnx2x_release_hw_lock(bp, bnx2x_get_leader_lock_resource(bp));
2026 int bnx2x_release_hw_lock(struct bnx2x *bp, u32 resource)
2029 u32 resource_bit = (1 << resource);
2030 int func = BP_FUNC(bp);
2031 u32 hw_lock_control_reg;
2033 /* Validating that the resource is within range */
2034 if (resource > HW_LOCK_MAX_RESOURCE_VALUE) {
2035 BNX2X_ERR("resource(0x%x) > HW_LOCK_MAX_RESOURCE_VALUE(0x%x)\n",
2036 resource, HW_LOCK_MAX_RESOURCE_VALUE);
2041 hw_lock_control_reg = (MISC_REG_DRIVER_CONTROL_1 + func*8);
2043 hw_lock_control_reg =
2044 (MISC_REG_DRIVER_CONTROL_7 + (func - 6)*8);
2047 /* Validating that the resource is currently taken */
2048 lock_status = REG_RD(bp, hw_lock_control_reg);
2049 if (!(lock_status & resource_bit)) {
2050 BNX2X_ERR("lock_status 0x%x resource_bit 0x%x. Unlock was called but lock wasn't taken!\n",
2051 lock_status, resource_bit);
2055 REG_WR(bp, hw_lock_control_reg, resource_bit);
2059 int bnx2x_get_gpio(struct bnx2x *bp, int gpio_num, u8 port)
2061 /* The GPIO should be swapped if swap register is set and active */
2062 int gpio_port = (REG_RD(bp, NIG_REG_PORT_SWAP) &&
2063 REG_RD(bp, NIG_REG_STRAP_OVERRIDE)) ^ port;
2064 int gpio_shift = gpio_num +
2065 (gpio_port ? MISC_REGISTERS_GPIO_PORT_SHIFT : 0);
2066 u32 gpio_mask = (1 << gpio_shift);
2070 if (gpio_num > MISC_REGISTERS_GPIO_3) {
2071 BNX2X_ERR("Invalid GPIO %d\n", gpio_num);
2075 /* read GPIO value */
2076 gpio_reg = REG_RD(bp, MISC_REG_GPIO);
2078 /* get the requested pin value */
2079 if ((gpio_reg & gpio_mask) == gpio_mask)
2087 int bnx2x_set_gpio(struct bnx2x *bp, int gpio_num, u32 mode, u8 port)
2089 /* The GPIO should be swapped if swap register is set and active */
2090 int gpio_port = (REG_RD(bp, NIG_REG_PORT_SWAP) &&
2091 REG_RD(bp, NIG_REG_STRAP_OVERRIDE)) ^ port;
2092 int gpio_shift = gpio_num +
2093 (gpio_port ? MISC_REGISTERS_GPIO_PORT_SHIFT : 0);
2094 u32 gpio_mask = (1 << gpio_shift);
2097 if (gpio_num > MISC_REGISTERS_GPIO_3) {
2098 BNX2X_ERR("Invalid GPIO %d\n", gpio_num);
2102 bnx2x_acquire_hw_lock(bp, HW_LOCK_RESOURCE_GPIO);
2103 /* read GPIO and mask except the float bits */
2104 gpio_reg = (REG_RD(bp, MISC_REG_GPIO) & MISC_REGISTERS_GPIO_FLOAT);
2107 case MISC_REGISTERS_GPIO_OUTPUT_LOW:
2109 "Set GPIO %d (shift %d) -> output low\n",
2110 gpio_num, gpio_shift);
2111 /* clear FLOAT and set CLR */
2112 gpio_reg &= ~(gpio_mask << MISC_REGISTERS_GPIO_FLOAT_POS);
2113 gpio_reg |= (gpio_mask << MISC_REGISTERS_GPIO_CLR_POS);
2116 case MISC_REGISTERS_GPIO_OUTPUT_HIGH:
2118 "Set GPIO %d (shift %d) -> output high\n",
2119 gpio_num, gpio_shift);
2120 /* clear FLOAT and set SET */
2121 gpio_reg &= ~(gpio_mask << MISC_REGISTERS_GPIO_FLOAT_POS);
2122 gpio_reg |= (gpio_mask << MISC_REGISTERS_GPIO_SET_POS);
2125 case MISC_REGISTERS_GPIO_INPUT_HI_Z:
2127 "Set GPIO %d (shift %d) -> input\n",
2128 gpio_num, gpio_shift);
2130 gpio_reg |= (gpio_mask << MISC_REGISTERS_GPIO_FLOAT_POS);
2137 REG_WR(bp, MISC_REG_GPIO, gpio_reg);
2138 bnx2x_release_hw_lock(bp, HW_LOCK_RESOURCE_GPIO);
2143 int bnx2x_set_mult_gpio(struct bnx2x *bp, u8 pins, u32 mode)
2148 /* Any port swapping should be handled by caller. */
2150 bnx2x_acquire_hw_lock(bp, HW_LOCK_RESOURCE_GPIO);
2151 /* read GPIO and mask except the float bits */
2152 gpio_reg = REG_RD(bp, MISC_REG_GPIO);
2153 gpio_reg &= ~(pins << MISC_REGISTERS_GPIO_FLOAT_POS);
2154 gpio_reg &= ~(pins << MISC_REGISTERS_GPIO_CLR_POS);
2155 gpio_reg &= ~(pins << MISC_REGISTERS_GPIO_SET_POS);
2158 case MISC_REGISTERS_GPIO_OUTPUT_LOW:
2159 DP(NETIF_MSG_LINK, "Set GPIO 0x%x -> output low\n", pins);
2161 gpio_reg |= (pins << MISC_REGISTERS_GPIO_CLR_POS);
2164 case MISC_REGISTERS_GPIO_OUTPUT_HIGH:
2165 DP(NETIF_MSG_LINK, "Set GPIO 0x%x -> output high\n", pins);
2167 gpio_reg |= (pins << MISC_REGISTERS_GPIO_SET_POS);
2170 case MISC_REGISTERS_GPIO_INPUT_HI_Z:
2171 DP(NETIF_MSG_LINK, "Set GPIO 0x%x -> input\n", pins);
2173 gpio_reg |= (pins << MISC_REGISTERS_GPIO_FLOAT_POS);
2177 BNX2X_ERR("Invalid GPIO mode assignment %d\n", mode);
2183 REG_WR(bp, MISC_REG_GPIO, gpio_reg);
2185 bnx2x_release_hw_lock(bp, HW_LOCK_RESOURCE_GPIO);
2190 int bnx2x_set_gpio_int(struct bnx2x *bp, int gpio_num, u32 mode, u8 port)
2192 /* The GPIO should be swapped if swap register is set and active */
2193 int gpio_port = (REG_RD(bp, NIG_REG_PORT_SWAP) &&
2194 REG_RD(bp, NIG_REG_STRAP_OVERRIDE)) ^ port;
2195 int gpio_shift = gpio_num +
2196 (gpio_port ? MISC_REGISTERS_GPIO_PORT_SHIFT : 0);
2197 u32 gpio_mask = (1 << gpio_shift);
2200 if (gpio_num > MISC_REGISTERS_GPIO_3) {
2201 BNX2X_ERR("Invalid GPIO %d\n", gpio_num);
2205 bnx2x_acquire_hw_lock(bp, HW_LOCK_RESOURCE_GPIO);
2207 gpio_reg = REG_RD(bp, MISC_REG_GPIO_INT);
2210 case MISC_REGISTERS_GPIO_INT_OUTPUT_CLR:
2212 "Clear GPIO INT %d (shift %d) -> output low\n",
2213 gpio_num, gpio_shift);
2214 /* clear SET and set CLR */
2215 gpio_reg &= ~(gpio_mask << MISC_REGISTERS_GPIO_INT_SET_POS);
2216 gpio_reg |= (gpio_mask << MISC_REGISTERS_GPIO_INT_CLR_POS);
2219 case MISC_REGISTERS_GPIO_INT_OUTPUT_SET:
2221 "Set GPIO INT %d (shift %d) -> output high\n",
2222 gpio_num, gpio_shift);
2223 /* clear CLR and set SET */
2224 gpio_reg &= ~(gpio_mask << MISC_REGISTERS_GPIO_INT_CLR_POS);
2225 gpio_reg |= (gpio_mask << MISC_REGISTERS_GPIO_INT_SET_POS);
2232 REG_WR(bp, MISC_REG_GPIO_INT, gpio_reg);
2233 bnx2x_release_hw_lock(bp, HW_LOCK_RESOURCE_GPIO);
2238 static int bnx2x_set_spio(struct bnx2x *bp, int spio, u32 mode)
2242 /* Only 2 SPIOs are configurable */
2243 if ((spio != MISC_SPIO_SPIO4) && (spio != MISC_SPIO_SPIO5)) {
2244 BNX2X_ERR("Invalid SPIO 0x%x\n", spio);
2248 bnx2x_acquire_hw_lock(bp, HW_LOCK_RESOURCE_SPIO);
2249 /* read SPIO and mask except the float bits */
2250 spio_reg = (REG_RD(bp, MISC_REG_SPIO) & MISC_SPIO_FLOAT);
2253 case MISC_SPIO_OUTPUT_LOW:
2254 DP(NETIF_MSG_HW, "Set SPIO 0x%x -> output low\n", spio);
2255 /* clear FLOAT and set CLR */
2256 spio_reg &= ~(spio << MISC_SPIO_FLOAT_POS);
2257 spio_reg |= (spio << MISC_SPIO_CLR_POS);
2260 case MISC_SPIO_OUTPUT_HIGH:
2261 DP(NETIF_MSG_HW, "Set SPIO 0x%x -> output high\n", spio);
2262 /* clear FLOAT and set SET */
2263 spio_reg &= ~(spio << MISC_SPIO_FLOAT_POS);
2264 spio_reg |= (spio << MISC_SPIO_SET_POS);
2267 case MISC_SPIO_INPUT_HI_Z:
2268 DP(NETIF_MSG_HW, "Set SPIO 0x%x -> input\n", spio);
2270 spio_reg |= (spio << MISC_SPIO_FLOAT_POS);
2277 REG_WR(bp, MISC_REG_SPIO, spio_reg);
2278 bnx2x_release_hw_lock(bp, HW_LOCK_RESOURCE_SPIO);
2283 void bnx2x_calc_fc_adv(struct bnx2x *bp)
2285 u8 cfg_idx = bnx2x_get_link_cfg_idx(bp);
2287 bp->port.advertising[cfg_idx] &= ~(ADVERTISED_Asym_Pause |
2289 switch (bp->link_vars.ieee_fc &
2290 MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_MASK) {
2291 case MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_BOTH:
2292 bp->port.advertising[cfg_idx] |= (ADVERTISED_Asym_Pause |
2296 case MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_ASYMMETRIC:
2297 bp->port.advertising[cfg_idx] |= ADVERTISED_Asym_Pause;
2305 static void bnx2x_set_requested_fc(struct bnx2x *bp)
2307 /* Initialize link parameters structure variables
2308 * It is recommended to turn off RX FC for jumbo frames
2309 * for better performance
2311 if (CHIP_IS_E1x(bp) && (bp->dev->mtu > 5000))
2312 bp->link_params.req_fc_auto_adv = BNX2X_FLOW_CTRL_TX;
2314 bp->link_params.req_fc_auto_adv = BNX2X_FLOW_CTRL_BOTH;
2317 static void bnx2x_init_dropless_fc(struct bnx2x *bp)
2319 u32 pause_enabled = 0;
2321 if (!CHIP_IS_E1(bp) && bp->dropless_fc && bp->link_vars.link_up) {
2322 if (bp->link_vars.flow_ctrl & BNX2X_FLOW_CTRL_TX)
2325 REG_WR(bp, BAR_USTRORM_INTMEM +
2326 USTORM_ETH_PAUSE_ENABLED_OFFSET(BP_PORT(bp)),
2330 DP(NETIF_MSG_IFUP | NETIF_MSG_LINK, "dropless_fc is %s\n",
2331 pause_enabled ? "enabled" : "disabled");
2334 int bnx2x_initial_phy_init(struct bnx2x *bp, int load_mode)
2336 int rc, cfx_idx = bnx2x_get_link_cfg_idx(bp);
2337 u16 req_line_speed = bp->link_params.req_line_speed[cfx_idx];
2339 if (!BP_NOMCP(bp)) {
2340 bnx2x_set_requested_fc(bp);
2341 bnx2x_acquire_phy_lock(bp);
2343 if (load_mode == LOAD_DIAG) {
2344 struct link_params *lp = &bp->link_params;
2345 lp->loopback_mode = LOOPBACK_XGXS;
2346 /* Prefer doing PHY loopback at highest speed */
2347 if (lp->req_line_speed[cfx_idx] < SPEED_20000) {
2348 if (lp->speed_cap_mask[cfx_idx] &
2349 PORT_HW_CFG_SPEED_CAPABILITY_D0_20G)
2350 lp->req_line_speed[cfx_idx] =
2352 else if (lp->speed_cap_mask[cfx_idx] &
2353 PORT_HW_CFG_SPEED_CAPABILITY_D0_10G)
2354 lp->req_line_speed[cfx_idx] =
2357 lp->req_line_speed[cfx_idx] =
2362 if (load_mode == LOAD_LOOPBACK_EXT) {
2363 struct link_params *lp = &bp->link_params;
2364 lp->loopback_mode = LOOPBACK_EXT;
2367 rc = bnx2x_phy_init(&bp->link_params, &bp->link_vars);
2369 bnx2x_release_phy_lock(bp);
2371 bnx2x_init_dropless_fc(bp);
2373 bnx2x_calc_fc_adv(bp);
2375 if (bp->link_vars.link_up) {
2376 bnx2x_stats_handle(bp, STATS_EVENT_LINK_UP);
2377 bnx2x_link_report(bp);
2379 queue_delayed_work(bnx2x_wq, &bp->period_task, 0);
2380 bp->link_params.req_line_speed[cfx_idx] = req_line_speed;
2383 BNX2X_ERR("Bootcode is missing - can not initialize link\n");
2387 void bnx2x_link_set(struct bnx2x *bp)
2389 if (!BP_NOMCP(bp)) {
2390 bnx2x_acquire_phy_lock(bp);
2391 bnx2x_phy_init(&bp->link_params, &bp->link_vars);
2392 bnx2x_release_phy_lock(bp);
2394 bnx2x_init_dropless_fc(bp);
2396 bnx2x_calc_fc_adv(bp);
2398 BNX2X_ERR("Bootcode is missing - can not set link\n");
2401 static void bnx2x__link_reset(struct bnx2x *bp)
2403 if (!BP_NOMCP(bp)) {
2404 bnx2x_acquire_phy_lock(bp);
2405 bnx2x_lfa_reset(&bp->link_params, &bp->link_vars);
2406 bnx2x_release_phy_lock(bp);
2408 BNX2X_ERR("Bootcode is missing - can not reset link\n");
2411 void bnx2x_force_link_reset(struct bnx2x *bp)
2413 bnx2x_acquire_phy_lock(bp);
2414 bnx2x_link_reset(&bp->link_params, &bp->link_vars, 1);
2415 bnx2x_release_phy_lock(bp);
2418 u8 bnx2x_link_test(struct bnx2x *bp, u8 is_serdes)
2422 if (!BP_NOMCP(bp)) {
2423 bnx2x_acquire_phy_lock(bp);
2424 rc = bnx2x_test_link(&bp->link_params, &bp->link_vars,
2426 bnx2x_release_phy_lock(bp);
2428 BNX2X_ERR("Bootcode is missing - can not test link\n");
2433 /* Calculates the sum of vn_min_rates.
2434 It's needed for further normalizing of the min_rates.
2436 sum of vn_min_rates.
2438 0 - if all the min_rates are 0.
2439 In the later case fairness algorithm should be deactivated.
2440 If not all min_rates are zero then those that are zeroes will be set to 1.
2442 static void bnx2x_calc_vn_min(struct bnx2x *bp,
2443 struct cmng_init_input *input)
2448 for (vn = VN_0; vn < BP_MAX_VN_NUM(bp); vn++) {
2449 u32 vn_cfg = bp->mf_config[vn];
2450 u32 vn_min_rate = ((vn_cfg & FUNC_MF_CFG_MIN_BW_MASK) >>
2451 FUNC_MF_CFG_MIN_BW_SHIFT) * 100;
2453 /* Skip hidden vns */
2454 if (vn_cfg & FUNC_MF_CFG_FUNC_HIDE)
2456 /* If min rate is zero - set it to 1 */
2457 else if (!vn_min_rate)
2458 vn_min_rate = DEF_MIN_RATE;
2462 input->vnic_min_rate[vn] = vn_min_rate;
2465 /* if ETS or all min rates are zeros - disable fairness */
2466 if (BNX2X_IS_ETS_ENABLED(bp)) {
2467 input->flags.cmng_enables &=
2468 ~CMNG_FLAGS_PER_PORT_FAIRNESS_VN;
2469 DP(NETIF_MSG_IFUP, "Fairness will be disabled due to ETS\n");
2470 } else if (all_zero) {
2471 input->flags.cmng_enables &=
2472 ~CMNG_FLAGS_PER_PORT_FAIRNESS_VN;
2474 "All MIN values are zeroes fairness will be disabled\n");
2476 input->flags.cmng_enables |=
2477 CMNG_FLAGS_PER_PORT_FAIRNESS_VN;
2480 static void bnx2x_calc_vn_max(struct bnx2x *bp, int vn,
2481 struct cmng_init_input *input)
2484 u32 vn_cfg = bp->mf_config[vn];
2486 if (vn_cfg & FUNC_MF_CFG_FUNC_HIDE)
2489 u32 maxCfg = bnx2x_extract_max_cfg(bp, vn_cfg);
2491 if (IS_MF_PERCENT_BW(bp)) {
2492 /* maxCfg in percents of linkspeed */
2493 vn_max_rate = (bp->link_vars.line_speed * maxCfg) / 100;
2494 } else /* SD modes */
2495 /* maxCfg is absolute in 100Mb units */
2496 vn_max_rate = maxCfg * 100;
2499 DP(NETIF_MSG_IFUP, "vn %d: vn_max_rate %d\n", vn, vn_max_rate);
2501 input->vnic_max_rate[vn] = vn_max_rate;
2504 static int bnx2x_get_cmng_fns_mode(struct bnx2x *bp)
2506 if (CHIP_REV_IS_SLOW(bp))
2507 return CMNG_FNS_NONE;
2509 return CMNG_FNS_MINMAX;
2511 return CMNG_FNS_NONE;
2514 void bnx2x_read_mf_cfg(struct bnx2x *bp)
2516 int vn, n = (CHIP_MODE_IS_4_PORT(bp) ? 2 : 1);
2519 return; /* what should be the default value in this case */
2521 /* For 2 port configuration the absolute function number formula
2523 * abs_func = 2 * vn + BP_PORT + BP_PATH
2525 * and there are 4 functions per port
2527 * For 4 port configuration it is
2528 * abs_func = 4 * vn + 2 * BP_PORT + BP_PATH
2530 * and there are 2 functions per port
2532 for (vn = VN_0; vn < BP_MAX_VN_NUM(bp); vn++) {
2533 int /*abs*/func = n * (2 * vn + BP_PORT(bp)) + BP_PATH(bp);
2535 if (func >= E1H_FUNC_MAX)
2539 MF_CFG_RD(bp, func_mf_config[func].config);
2541 if (bp->mf_config[BP_VN(bp)] & FUNC_MF_CFG_FUNC_DISABLED) {
2542 DP(NETIF_MSG_IFUP, "mf_cfg function disabled\n");
2543 bp->flags |= MF_FUNC_DIS;
2545 DP(NETIF_MSG_IFUP, "mf_cfg function enabled\n");
2546 bp->flags &= ~MF_FUNC_DIS;
2550 static void bnx2x_cmng_fns_init(struct bnx2x *bp, u8 read_cfg, u8 cmng_type)
2552 struct cmng_init_input input;
2553 memset(&input, 0, sizeof(struct cmng_init_input));
2555 input.port_rate = bp->link_vars.line_speed;
2557 if (cmng_type == CMNG_FNS_MINMAX && input.port_rate) {
2560 /* read mf conf from shmem */
2562 bnx2x_read_mf_cfg(bp);
2564 /* vn_weight_sum and enable fairness if not 0 */
2565 bnx2x_calc_vn_min(bp, &input);
2567 /* calculate and set min-max rate for each vn */
2569 for (vn = VN_0; vn < BP_MAX_VN_NUM(bp); vn++)
2570 bnx2x_calc_vn_max(bp, vn, &input);
2572 /* always enable rate shaping and fairness */
2573 input.flags.cmng_enables |=
2574 CMNG_FLAGS_PER_PORT_RATE_SHAPING_VN;
2576 bnx2x_init_cmng(&input, &bp->cmng);
2580 /* rate shaping and fairness are disabled */
2582 "rate shaping and fairness are disabled\n");
2585 static void storm_memset_cmng(struct bnx2x *bp,
2586 struct cmng_init *cmng,
2590 size_t size = sizeof(struct cmng_struct_per_port);
2592 u32 addr = BAR_XSTRORM_INTMEM +
2593 XSTORM_CMNG_PER_PORT_VARS_OFFSET(port);
2595 __storm_memset_struct(bp, addr, size, (u32 *)&cmng->port);
2597 for (vn = VN_0; vn < BP_MAX_VN_NUM(bp); vn++) {
2598 int func = func_by_vn(bp, vn);
2600 addr = BAR_XSTRORM_INTMEM +
2601 XSTORM_RATE_SHAPING_PER_VN_VARS_OFFSET(func);
2602 size = sizeof(struct rate_shaping_vars_per_vn);
2603 __storm_memset_struct(bp, addr, size,
2604 (u32 *)&cmng->vnic.vnic_max_rate[vn]);
2606 addr = BAR_XSTRORM_INTMEM +
2607 XSTORM_FAIRNESS_PER_VN_VARS_OFFSET(func);
2608 size = sizeof(struct fairness_vars_per_vn);
2609 __storm_memset_struct(bp, addr, size,
2610 (u32 *)&cmng->vnic.vnic_min_rate[vn]);
2614 /* init cmng mode in HW according to local configuration */
2615 void bnx2x_set_local_cmng(struct bnx2x *bp)
2617 int cmng_fns = bnx2x_get_cmng_fns_mode(bp);
2619 if (cmng_fns != CMNG_FNS_NONE) {
2620 bnx2x_cmng_fns_init(bp, false, cmng_fns);
2621 storm_memset_cmng(bp, &bp->cmng, BP_PORT(bp));
2623 /* rate shaping and fairness are disabled */
2625 "single function mode without fairness\n");
2629 /* This function is called upon link interrupt */
2630 static void bnx2x_link_attn(struct bnx2x *bp)
2632 /* Make sure that we are synced with the current statistics */
2633 bnx2x_stats_handle(bp, STATS_EVENT_STOP);
2635 bnx2x_link_update(&bp->link_params, &bp->link_vars);
2637 bnx2x_init_dropless_fc(bp);
2639 if (bp->link_vars.link_up) {
2641 if (bp->link_vars.mac_type != MAC_TYPE_EMAC) {
2642 struct host_port_stats *pstats;
2644 pstats = bnx2x_sp(bp, port_stats);
2645 /* reset old mac stats */
2646 memset(&(pstats->mac_stx[0]), 0,
2647 sizeof(struct mac_stx));
2649 if (bp->state == BNX2X_STATE_OPEN)
2650 bnx2x_stats_handle(bp, STATS_EVENT_LINK_UP);
2653 if (bp->link_vars.link_up && bp->link_vars.line_speed)
2654 bnx2x_set_local_cmng(bp);
2656 __bnx2x_link_report(bp);
2659 bnx2x_link_sync_notify(bp);
2662 void bnx2x__link_status_update(struct bnx2x *bp)
2664 if (bp->state != BNX2X_STATE_OPEN)
2667 /* read updated dcb configuration */
2669 bnx2x_dcbx_pmf_update(bp);
2670 bnx2x_link_status_update(&bp->link_params, &bp->link_vars);
2671 if (bp->link_vars.link_up)
2672 bnx2x_stats_handle(bp, STATS_EVENT_LINK_UP);
2674 bnx2x_stats_handle(bp, STATS_EVENT_STOP);
2675 /* indicate link status */
2676 bnx2x_link_report(bp);
2679 bp->port.supported[0] |= (SUPPORTED_10baseT_Half |
2680 SUPPORTED_10baseT_Full |
2681 SUPPORTED_100baseT_Half |
2682 SUPPORTED_100baseT_Full |
2683 SUPPORTED_1000baseT_Full |
2684 SUPPORTED_2500baseX_Full |
2685 SUPPORTED_10000baseT_Full |
2690 SUPPORTED_Asym_Pause);
2691 bp->port.advertising[0] = bp->port.supported[0];
2693 bp->link_params.bp = bp;
2694 bp->link_params.port = BP_PORT(bp);
2695 bp->link_params.req_duplex[0] = DUPLEX_FULL;
2696 bp->link_params.req_flow_ctrl[0] = BNX2X_FLOW_CTRL_NONE;
2697 bp->link_params.req_line_speed[0] = SPEED_10000;
2698 bp->link_params.speed_cap_mask[0] = 0x7f0000;
2699 bp->link_params.switch_cfg = SWITCH_CFG_10G;
2700 bp->link_vars.mac_type = MAC_TYPE_BMAC;
2701 bp->link_vars.line_speed = SPEED_10000;
2702 bp->link_vars.link_status =
2703 (LINK_STATUS_LINK_UP |
2704 LINK_STATUS_SPEED_AND_DUPLEX_10GTFD);
2705 bp->link_vars.link_up = 1;
2706 bp->link_vars.duplex = DUPLEX_FULL;
2707 bp->link_vars.flow_ctrl = BNX2X_FLOW_CTRL_NONE;
2708 __bnx2x_link_report(bp);
2710 bnx2x_sample_bulletin(bp);
2712 /* if bulletin board did not have an update for link status
2713 * __bnx2x_link_report will report current status
2714 * but it will NOT duplicate report in case of already reported
2715 * during sampling bulletin board.
2717 bnx2x_stats_handle(bp, STATS_EVENT_LINK_UP);
2721 static int bnx2x_afex_func_update(struct bnx2x *bp, u16 vifid,
2722 u16 vlan_val, u8 allowed_prio)
2724 struct bnx2x_func_state_params func_params = {NULL};
2725 struct bnx2x_func_afex_update_params *f_update_params =
2726 &func_params.params.afex_update;
2728 func_params.f_obj = &bp->func_obj;
2729 func_params.cmd = BNX2X_F_CMD_AFEX_UPDATE;
2731 /* no need to wait for RAMROD completion, so don't
2732 * set RAMROD_COMP_WAIT flag
2735 f_update_params->vif_id = vifid;
2736 f_update_params->afex_default_vlan = vlan_val;
2737 f_update_params->allowed_priorities = allowed_prio;
2739 /* if ramrod can not be sent, response to MCP immediately */
2740 if (bnx2x_func_state_change(bp, &func_params) < 0)
2741 bnx2x_fw_command(bp, DRV_MSG_CODE_AFEX_VIFSET_ACK, 0);
2746 static int bnx2x_afex_handle_vif_list_cmd(struct bnx2x *bp, u8 cmd_type,
2747 u16 vif_index, u8 func_bit_map)
2749 struct bnx2x_func_state_params func_params = {NULL};
2750 struct bnx2x_func_afex_viflists_params *update_params =
2751 &func_params.params.afex_viflists;
2755 /* validate only LIST_SET and LIST_GET are received from switch */
2756 if ((cmd_type != VIF_LIST_RULE_GET) && (cmd_type != VIF_LIST_RULE_SET))
2757 BNX2X_ERR("BUG! afex_handle_vif_list_cmd invalid type 0x%x\n",
2760 func_params.f_obj = &bp->func_obj;
2761 func_params.cmd = BNX2X_F_CMD_AFEX_VIFLISTS;
2763 /* set parameters according to cmd_type */
2764 update_params->afex_vif_list_command = cmd_type;
2765 update_params->vif_list_index = vif_index;
2766 update_params->func_bit_map =
2767 (cmd_type == VIF_LIST_RULE_GET) ? 0 : func_bit_map;
2768 update_params->func_to_clear = 0;
2770 (cmd_type == VIF_LIST_RULE_GET) ?
2771 DRV_MSG_CODE_AFEX_LISTGET_ACK :
2772 DRV_MSG_CODE_AFEX_LISTSET_ACK;
2774 /* if ramrod can not be sent, respond to MCP immediately for
2775 * SET and GET requests (other are not triggered from MCP)
2777 rc = bnx2x_func_state_change(bp, &func_params);
2779 bnx2x_fw_command(bp, drv_msg_code, 0);
2784 static void bnx2x_handle_afex_cmd(struct bnx2x *bp, u32 cmd)
2786 struct afex_stats afex_stats;
2787 u32 func = BP_ABS_FUNC(bp);
2794 u32 addr_to_write, vifid, addrs, stats_type, i;
2796 if (cmd & DRV_STATUS_AFEX_LISTGET_REQ) {
2797 vifid = SHMEM2_RD(bp, afex_param1_to_driver[BP_FW_MB_IDX(bp)]);
2799 "afex: got MCP req LISTGET_REQ for vifid 0x%x\n", vifid);
2800 bnx2x_afex_handle_vif_list_cmd(bp, VIF_LIST_RULE_GET, vifid, 0);
2803 if (cmd & DRV_STATUS_AFEX_LISTSET_REQ) {
2804 vifid = SHMEM2_RD(bp, afex_param1_to_driver[BP_FW_MB_IDX(bp)]);
2805 addrs = SHMEM2_RD(bp, afex_param2_to_driver[BP_FW_MB_IDX(bp)]);
2807 "afex: got MCP req LISTSET_REQ for vifid 0x%x addrs 0x%x\n",
2809 bnx2x_afex_handle_vif_list_cmd(bp, VIF_LIST_RULE_SET, vifid,
2813 if (cmd & DRV_STATUS_AFEX_STATSGET_REQ) {
2814 addr_to_write = SHMEM2_RD(bp,
2815 afex_scratchpad_addr_to_write[BP_FW_MB_IDX(bp)]);
2816 stats_type = SHMEM2_RD(bp,
2817 afex_param1_to_driver[BP_FW_MB_IDX(bp)]);
2820 "afex: got MCP req STATSGET_REQ, write to addr 0x%x\n",
2823 bnx2x_afex_collect_stats(bp, (void *)&afex_stats, stats_type);
2825 /* write response to scratchpad, for MCP */
2826 for (i = 0; i < (sizeof(struct afex_stats)/sizeof(u32)); i++)
2827 REG_WR(bp, addr_to_write + i*sizeof(u32),
2828 *(((u32 *)(&afex_stats))+i));
2830 /* send ack message to MCP */
2831 bnx2x_fw_command(bp, DRV_MSG_CODE_AFEX_STATSGET_ACK, 0);
2834 if (cmd & DRV_STATUS_AFEX_VIFSET_REQ) {
2835 mf_config = MF_CFG_RD(bp, func_mf_config[func].config);
2836 bp->mf_config[BP_VN(bp)] = mf_config;
2838 "afex: got MCP req VIFSET_REQ, mf_config 0x%x\n",
2841 /* if VIF_SET is "enabled" */
2842 if (!(mf_config & FUNC_MF_CFG_FUNC_DISABLED)) {
2843 /* set rate limit directly to internal RAM */
2844 struct cmng_init_input cmng_input;
2845 struct rate_shaping_vars_per_vn m_rs_vn;
2846 size_t size = sizeof(struct rate_shaping_vars_per_vn);
2847 u32 addr = BAR_XSTRORM_INTMEM +
2848 XSTORM_RATE_SHAPING_PER_VN_VARS_OFFSET(BP_FUNC(bp));
2850 bp->mf_config[BP_VN(bp)] = mf_config;
2852 bnx2x_calc_vn_max(bp, BP_VN(bp), &cmng_input);
2853 m_rs_vn.vn_counter.rate =
2854 cmng_input.vnic_max_rate[BP_VN(bp)];
2855 m_rs_vn.vn_counter.quota =
2856 (m_rs_vn.vn_counter.rate *
2857 RS_PERIODIC_TIMEOUT_USEC) / 8;
2859 __storm_memset_struct(bp, addr, size, (u32 *)&m_rs_vn);
2861 /* read relevant values from mf_cfg struct in shmem */
2863 (MF_CFG_RD(bp, func_mf_config[func].e1hov_tag) &
2864 FUNC_MF_CFG_E1HOV_TAG_MASK) >>
2865 FUNC_MF_CFG_E1HOV_TAG_SHIFT;
2867 (MF_CFG_RD(bp, func_mf_config[func].e1hov_tag) &
2868 FUNC_MF_CFG_AFEX_VLAN_MASK) >>
2869 FUNC_MF_CFG_AFEX_VLAN_SHIFT;
2870 vlan_prio = (mf_config &
2871 FUNC_MF_CFG_TRANSMIT_PRIORITY_MASK) >>
2872 FUNC_MF_CFG_TRANSMIT_PRIORITY_SHIFT;
2873 vlan_val |= (vlan_prio << VLAN_PRIO_SHIFT);
2876 func_mf_config[func].afex_config) &
2877 FUNC_MF_CFG_AFEX_VLAN_MODE_MASK) >>
2878 FUNC_MF_CFG_AFEX_VLAN_MODE_SHIFT;
2881 func_mf_config[func].afex_config) &
2882 FUNC_MF_CFG_AFEX_COS_FILTER_MASK) >>
2883 FUNC_MF_CFG_AFEX_COS_FILTER_SHIFT;
2885 /* send ramrod to FW, return in case of failure */
2886 if (bnx2x_afex_func_update(bp, vif_id, vlan_val,
2890 bp->afex_def_vlan_tag = vlan_val;
2891 bp->afex_vlan_mode = vlan_mode;
2893 /* notify link down because BP->flags is disabled */
2894 bnx2x_link_report(bp);
2896 /* send INVALID VIF ramrod to FW */
2897 bnx2x_afex_func_update(bp, 0xFFFF, 0, 0);
2899 /* Reset the default afex VLAN */
2900 bp->afex_def_vlan_tag = -1;
2905 static void bnx2x_handle_update_svid_cmd(struct bnx2x *bp)
2907 struct bnx2x_func_switch_update_params *switch_update_params;
2908 struct bnx2x_func_state_params func_params;
2910 memset(&func_params, 0, sizeof(struct bnx2x_func_state_params));
2911 switch_update_params = &func_params.params.switch_update;
2912 func_params.f_obj = &bp->func_obj;
2913 func_params.cmd = BNX2X_F_CMD_SWITCH_UPDATE;
2915 /* Prepare parameters for function state transitions */
2916 __set_bit(RAMROD_COMP_WAIT, &func_params.ramrod_flags);
2917 __set_bit(RAMROD_RETRY, &func_params.ramrod_flags);
2919 if (IS_MF_UFP(bp) || IS_MF_BD(bp)) {
2920 int func = BP_ABS_FUNC(bp);
2923 /* Re-learn the S-tag from shmem */
2924 val = MF_CFG_RD(bp, func_mf_config[func].e1hov_tag) &
2925 FUNC_MF_CFG_E1HOV_TAG_MASK;
2926 if (val != FUNC_MF_CFG_E1HOV_TAG_DEFAULT) {
2929 BNX2X_ERR("Got an SVID event, but no tag is configured in shmem\n");
2933 /* Configure new S-tag in LLH */
2934 REG_WR(bp, NIG_REG_LLH0_FUNC_VLAN_ID + BP_PORT(bp) * 8,
2937 /* Send Ramrod to update FW of change */
2938 __set_bit(BNX2X_F_UPDATE_SD_VLAN_TAG_CHNG,
2939 &switch_update_params->changes);
2940 switch_update_params->vlan = bp->mf_ov;
2942 if (bnx2x_func_state_change(bp, &func_params) < 0) {
2943 BNX2X_ERR("Failed to configure FW of S-tag Change to %02x\n",
2947 DP(BNX2X_MSG_MCP, "Configured S-tag %02x\n",
2954 bnx2x_fw_command(bp, DRV_MSG_CODE_OEM_UPDATE_SVID_OK, 0);
2957 bnx2x_fw_command(bp, DRV_MSG_CODE_OEM_UPDATE_SVID_FAILURE, 0);
2960 static void bnx2x_pmf_update(struct bnx2x *bp)
2962 int port = BP_PORT(bp);
2966 DP(BNX2X_MSG_MCP, "pmf %d\n", bp->port.pmf);
2969 * We need the mb() to ensure the ordering between the writing to
2970 * bp->port.pmf here and reading it from the bnx2x_periodic_task().
2974 /* queue a periodic task */
2975 queue_delayed_work(bnx2x_wq, &bp->period_task, 0);
2977 bnx2x_dcbx_pmf_update(bp);
2979 /* enable nig attention */
2980 val = (0xff0f | (1 << (BP_VN(bp) + 4)));
2981 if (bp->common.int_block == INT_BLOCK_HC) {
2982 REG_WR(bp, HC_REG_TRAILING_EDGE_0 + port*8, val);
2983 REG_WR(bp, HC_REG_LEADING_EDGE_0 + port*8, val);
2984 } else if (!CHIP_IS_E1x(bp)) {
2985 REG_WR(bp, IGU_REG_TRAILING_EDGE_LATCH, val);
2986 REG_WR(bp, IGU_REG_LEADING_EDGE_LATCH, val);
2989 bnx2x_stats_handle(bp, STATS_EVENT_PMF);
2997 * General service functions
3000 /* send the MCP a request, block until there is a reply */
3001 u32 bnx2x_fw_command(struct bnx2x *bp, u32 command, u32 param)
3003 int mb_idx = BP_FW_MB_IDX(bp);
3007 u8 delay = CHIP_REV_IS_SLOW(bp) ? 100 : 10;
3009 mutex_lock(&bp->fw_mb_mutex);
3011 SHMEM_WR(bp, func_mb[mb_idx].drv_mb_param, param);
3012 SHMEM_WR(bp, func_mb[mb_idx].drv_mb_header, (command | seq));
3014 DP(BNX2X_MSG_MCP, "wrote command (%x) to FW MB param 0x%08x\n",
3015 (command | seq), param);
3018 /* let the FW do it's magic ... */
3021 rc = SHMEM_RD(bp, func_mb[mb_idx].fw_mb_header);
3023 /* Give the FW up to 5 second (500*10ms) */
3024 } while ((seq != (rc & FW_MSG_SEQ_NUMBER_MASK)) && (cnt++ < 500));
3026 DP(BNX2X_MSG_MCP, "[after %d ms] read (%x) seq is (%x) from FW MB\n",
3027 cnt*delay, rc, seq);
3029 /* is this a reply to our command? */
3030 if (seq == (rc & FW_MSG_SEQ_NUMBER_MASK))
3031 rc &= FW_MSG_CODE_MASK;
3034 BNX2X_ERR("FW failed to respond!\n");
3038 mutex_unlock(&bp->fw_mb_mutex);
3043 static void storm_memset_func_cfg(struct bnx2x *bp,
3044 struct tstorm_eth_function_common_config *tcfg,
3047 size_t size = sizeof(struct tstorm_eth_function_common_config);
3049 u32 addr = BAR_TSTRORM_INTMEM +
3050 TSTORM_FUNCTION_COMMON_CONFIG_OFFSET(abs_fid);
3052 __storm_memset_struct(bp, addr, size, (u32 *)tcfg);
3055 void bnx2x_func_init(struct bnx2x *bp, struct bnx2x_func_init_params *p)
3057 if (CHIP_IS_E1x(bp)) {
3058 struct tstorm_eth_function_common_config tcfg = {0};
3060 storm_memset_func_cfg(bp, &tcfg, p->func_id);
3063 /* Enable the function in the FW */
3064 storm_memset_vf_to_pf(bp, p->func_id, p->pf_id);
3065 storm_memset_func_en(bp, p->func_id, 1);
3068 if (p->spq_active) {
3069 storm_memset_spq_addr(bp, p->spq_map, p->func_id);
3070 REG_WR(bp, XSEM_REG_FAST_MEMORY +
3071 XSTORM_SPQ_PROD_OFFSET(p->func_id), p->spq_prod);
3076 * bnx2x_get_common_flags - Return common flags
3080 * @zero_stats TRUE if statistics zeroing is needed
3082 * Return the flags that are common for the Tx-only and not normal connections.
3084 static unsigned long bnx2x_get_common_flags(struct bnx2x *bp,
3085 struct bnx2x_fastpath *fp,
3088 unsigned long flags = 0;
3090 /* PF driver will always initialize the Queue to an ACTIVE state */
3091 __set_bit(BNX2X_Q_FLG_ACTIVE, &flags);
3093 /* tx only connections collect statistics (on the same index as the
3094 * parent connection). The statistics are zeroed when the parent
3095 * connection is initialized.
3098 __set_bit(BNX2X_Q_FLG_STATS, &flags);
3100 __set_bit(BNX2X_Q_FLG_ZERO_STATS, &flags);
3102 if (bp->flags & TX_SWITCHING)
3103 __set_bit(BNX2X_Q_FLG_TX_SWITCH, &flags);
3105 __set_bit(BNX2X_Q_FLG_PCSUM_ON_PKT, &flags);
3106 __set_bit(BNX2X_Q_FLG_TUN_INC_INNER_IP_ID, &flags);
3108 #ifdef BNX2X_STOP_ON_ERROR
3109 __set_bit(BNX2X_Q_FLG_TX_SEC, &flags);
3115 static unsigned long bnx2x_get_q_flags(struct bnx2x *bp,
3116 struct bnx2x_fastpath *fp,
3119 unsigned long flags = 0;
3121 /* calculate other queue flags */
3123 __set_bit(BNX2X_Q_FLG_OV, &flags);
3125 if (IS_FCOE_FP(fp)) {
3126 __set_bit(BNX2X_Q_FLG_FCOE, &flags);
3127 /* For FCoE - force usage of default priority (for afex) */
3128 __set_bit(BNX2X_Q_FLG_FORCE_DEFAULT_PRI, &flags);
3131 if (fp->mode != TPA_MODE_DISABLED) {
3132 __set_bit(BNX2X_Q_FLG_TPA, &flags);
3133 __set_bit(BNX2X_Q_FLG_TPA_IPV6, &flags);
3134 if (fp->mode == TPA_MODE_GRO)
3135 __set_bit(BNX2X_Q_FLG_TPA_GRO, &flags);
3139 __set_bit(BNX2X_Q_FLG_LEADING_RSS, &flags);
3140 __set_bit(BNX2X_Q_FLG_MCAST, &flags);
3143 /* Always set HW VLAN stripping */
3144 __set_bit(BNX2X_Q_FLG_VLAN, &flags);
3146 /* configure silent vlan removal */
3148 __set_bit(BNX2X_Q_FLG_SILENT_VLAN_REM, &flags);
3150 return flags | bnx2x_get_common_flags(bp, fp, true);
3153 static void bnx2x_pf_q_prep_general(struct bnx2x *bp,
3154 struct bnx2x_fastpath *fp, struct bnx2x_general_setup_params *gen_init,
3157 gen_init->stat_id = bnx2x_stats_id(fp);
3158 gen_init->spcl_id = fp->cl_id;
3160 /* Always use mini-jumbo MTU for FCoE L2 ring */
3162 gen_init->mtu = BNX2X_FCOE_MINI_JUMBO_MTU;
3164 gen_init->mtu = bp->dev->mtu;
3166 gen_init->cos = cos;
3168 gen_init->fp_hsi = ETH_FP_HSI_VERSION;
3171 static void bnx2x_pf_rx_q_prep(struct bnx2x *bp,
3172 struct bnx2x_fastpath *fp, struct rxq_pause_params *pause,
3173 struct bnx2x_rxq_setup_params *rxq_init)
3177 u16 tpa_agg_size = 0;
3179 if (fp->mode != TPA_MODE_DISABLED) {
3180 pause->sge_th_lo = SGE_TH_LO(bp);
3181 pause->sge_th_hi = SGE_TH_HI(bp);
3183 /* validate SGE ring has enough to cross high threshold */
3184 WARN_ON(bp->dropless_fc &&
3185 pause->sge_th_hi + FW_PREFETCH_CNT >
3186 MAX_RX_SGE_CNT * NUM_RX_SGE_PAGES);
3188 tpa_agg_size = TPA_AGG_SIZE;
3189 max_sge = SGE_PAGE_ALIGN(bp->dev->mtu) >>
3191 max_sge = ((max_sge + PAGES_PER_SGE - 1) &
3192 (~(PAGES_PER_SGE-1))) >> PAGES_PER_SGE_SHIFT;
3193 sge_sz = (u16)min_t(u32, SGE_PAGES, 0xffff);
3196 /* pause - not for e1 */
3197 if (!CHIP_IS_E1(bp)) {
3198 pause->bd_th_lo = BD_TH_LO(bp);
3199 pause->bd_th_hi = BD_TH_HI(bp);
3201 pause->rcq_th_lo = RCQ_TH_LO(bp);
3202 pause->rcq_th_hi = RCQ_TH_HI(bp);
3204 * validate that rings have enough entries to cross
3207 WARN_ON(bp->dropless_fc &&
3208 pause->bd_th_hi + FW_PREFETCH_CNT >
3210 WARN_ON(bp->dropless_fc &&
3211 pause->rcq_th_hi + FW_PREFETCH_CNT >
3212 NUM_RCQ_RINGS * MAX_RCQ_DESC_CNT);
3218 rxq_init->dscr_map = fp->rx_desc_mapping;
3219 rxq_init->sge_map = fp->rx_sge_mapping;
3220 rxq_init->rcq_map = fp->rx_comp_mapping;
3221 rxq_init->rcq_np_map = fp->rx_comp_mapping + BCM_PAGE_SIZE;
3223 /* This should be a maximum number of data bytes that may be
3224 * placed on the BD (not including paddings).
3226 rxq_init->buf_sz = fp->rx_buf_size - BNX2X_FW_RX_ALIGN_START -
3227 BNX2X_FW_RX_ALIGN_END - IP_HEADER_ALIGNMENT_PADDING;
3229 rxq_init->cl_qzone_id = fp->cl_qzone_id;
3230 rxq_init->tpa_agg_sz = tpa_agg_size;
3231 rxq_init->sge_buf_sz = sge_sz;
3232 rxq_init->max_sges_pkt = max_sge;
3233 rxq_init->rss_engine_id = BP_FUNC(bp);
3234 rxq_init->mcast_engine_id = BP_FUNC(bp);
3236 /* Maximum number or simultaneous TPA aggregation for this Queue.
3238 * For PF Clients it should be the maximum available number.
3239 * VF driver(s) may want to define it to a smaller value.
3241 rxq_init->max_tpa_queues = MAX_AGG_QS(bp);
3243 rxq_init->cache_line_log = BNX2X_RX_ALIGN_SHIFT;
3244 rxq_init->fw_sb_id = fp->fw_sb_id;
3247 rxq_init->sb_cq_index = HC_SP_INDEX_ETH_FCOE_RX_CQ_CONS;
3249 rxq_init->sb_cq_index = HC_INDEX_ETH_RX_CQ_CONS;
3250 /* configure silent vlan removal
3251 * if multi function mode is afex, then mask default vlan
3253 if (IS_MF_AFEX(bp)) {
3254 rxq_init->silent_removal_value = bp->afex_def_vlan_tag;
3255 rxq_init->silent_removal_mask = VLAN_VID_MASK;
3259 static void bnx2x_pf_tx_q_prep(struct bnx2x *bp,
3260 struct bnx2x_fastpath *fp, struct bnx2x_txq_setup_params *txq_init,
3263 txq_init->dscr_map = fp->txdata_ptr[cos]->tx_desc_mapping;
3264 txq_init->sb_cq_index = HC_INDEX_ETH_FIRST_TX_CQ_CONS + cos;
3265 txq_init->traffic_type = LLFC_TRAFFIC_TYPE_NW;
3266 txq_init->fw_sb_id = fp->fw_sb_id;
3269 * set the tss leading client id for TX classification ==
3270 * leading RSS client id
3272 txq_init->tss_leading_cl_id = bnx2x_fp(bp, 0, cl_id);
3274 if (IS_FCOE_FP(fp)) {
3275 txq_init->sb_cq_index = HC_SP_INDEX_ETH_FCOE_TX_CQ_CONS;
3276 txq_init->traffic_type = LLFC_TRAFFIC_TYPE_FCOE;
3280 static void bnx2x_pf_init(struct bnx2x *bp)
3282 struct bnx2x_func_init_params func_init = {0};
3283 struct event_ring_data eq_data = { {0} };
3285 if (!CHIP_IS_E1x(bp)) {
3286 /* reset IGU PF statistics: MSIX + ATTN */
3288 REG_WR(bp, IGU_REG_STATISTIC_NUM_MESSAGE_SENT +
3289 BNX2X_IGU_STAS_MSG_VF_CNT*4 +
3290 (CHIP_MODE_IS_4_PORT(bp) ?
3291 BP_FUNC(bp) : BP_VN(bp))*4, 0);
3293 REG_WR(bp, IGU_REG_STATISTIC_NUM_MESSAGE_SENT +
3294 BNX2X_IGU_STAS_MSG_VF_CNT*4 +
3295 BNX2X_IGU_STAS_MSG_PF_CNT*4 +
3296 (CHIP_MODE_IS_4_PORT(bp) ?
3297 BP_FUNC(bp) : BP_VN(bp))*4, 0);
3300 func_init.spq_active = true;
3301 func_init.pf_id = BP_FUNC(bp);
3302 func_init.func_id = BP_FUNC(bp);
3303 func_init.spq_map = bp->spq_mapping;
3304 func_init.spq_prod = bp->spq_prod_idx;
3306 bnx2x_func_init(bp, &func_init);
3308 memset(&(bp->cmng), 0, sizeof(struct cmng_struct_per_port));
3311 * Congestion management values depend on the link rate
3312 * There is no active link so initial link rate is set to 10 Gbps.
3313 * When the link comes up The congestion management values are
3314 * re-calculated according to the actual link rate.
3316 bp->link_vars.line_speed = SPEED_10000;
3317 bnx2x_cmng_fns_init(bp, true, bnx2x_get_cmng_fns_mode(bp));
3319 /* Only the PMF sets the HW */
3321 storm_memset_cmng(bp, &bp->cmng, BP_PORT(bp));
3323 /* init Event Queue - PCI bus guarantees correct endianity*/
3324 eq_data.base_addr.hi = U64_HI(bp->eq_mapping);
3325 eq_data.base_addr.lo = U64_LO(bp->eq_mapping);
3326 eq_data.producer = bp->eq_prod;
3327 eq_data.index_id = HC_SP_INDEX_EQ_CONS;
3328 eq_data.sb_id = DEF_SB_ID;
3329 storm_memset_eq_data(bp, &eq_data, BP_FUNC(bp));
3332 static void bnx2x_e1h_disable(struct bnx2x *bp)
3334 int port = BP_PORT(bp);
3336 bnx2x_tx_disable(bp);
3338 REG_WR(bp, NIG_REG_LLH0_FUNC_EN + port*8, 0);
3341 static void bnx2x_e1h_enable(struct bnx2x *bp)
3343 int port = BP_PORT(bp);
3345 if (!(IS_MF_UFP(bp) && BNX2X_IS_MF_SD_PROTOCOL_FCOE(bp)))
3346 REG_WR(bp, NIG_REG_LLH0_FUNC_EN + port * 8, 1);
3348 /* Tx queue should be only re-enabled */
3349 netif_tx_wake_all_queues(bp->dev);
3352 * Should not call netif_carrier_on since it will be called if the link
3353 * is up when checking for link state
3357 #define DRV_INFO_ETH_STAT_NUM_MACS_REQUIRED 3
3359 static void bnx2x_drv_info_ether_stat(struct bnx2x *bp)
3361 struct eth_stats_info *ether_stat =
3362 &bp->slowpath->drv_info_to_mcp.ether_stat;
3363 struct bnx2x_vlan_mac_obj *mac_obj =
3364 &bp->sp_objs->mac_obj;
3367 strlcpy(ether_stat->version, DRV_MODULE_VERSION,
3368 ETH_STAT_INFO_VERSION_LEN);
3370 /* get DRV_INFO_ETH_STAT_NUM_MACS_REQUIRED macs, placing them in the
3371 * mac_local field in ether_stat struct. The base address is offset by 2
3372 * bytes to account for the field being 8 bytes but a mac address is
3373 * only 6 bytes. Likewise, the stride for the get_n_elements function is
3374 * 2 bytes to compensate from the 6 bytes of a mac to the 8 bytes
3375 * allocated by the ether_stat struct, so the macs will land in their
3378 for (i = 0; i < DRV_INFO_ETH_STAT_NUM_MACS_REQUIRED; i++)
3379 memset(ether_stat->mac_local + i, 0,
3380 sizeof(ether_stat->mac_local[0]));
3381 mac_obj->get_n_elements(bp, &bp->sp_objs[0].mac_obj,
3382 DRV_INFO_ETH_STAT_NUM_MACS_REQUIRED,
3383 ether_stat->mac_local + MAC_PAD, MAC_PAD,
3385 ether_stat->mtu_size = bp->dev->mtu;
3386 if (bp->dev->features & NETIF_F_RXCSUM)
3387 ether_stat->feature_flags |= FEATURE_ETH_CHKSUM_OFFLOAD_MASK;
3388 if (bp->dev->features & NETIF_F_TSO)
3389 ether_stat->feature_flags |= FEATURE_ETH_LSO_MASK;
3390 ether_stat->feature_flags |= bp->common.boot_mode;
3392 ether_stat->promiscuous_mode = (bp->dev->flags & IFF_PROMISC) ? 1 : 0;
3394 ether_stat->txq_size = bp->tx_ring_size;
3395 ether_stat->rxq_size = bp->rx_ring_size;
3397 #ifdef CONFIG_BNX2X_SRIOV
3398 ether_stat->vf_cnt = IS_SRIOV(bp) ? bp->vfdb->sriov.nr_virtfn : 0;
3402 static void bnx2x_drv_info_fcoe_stat(struct bnx2x *bp)
3404 struct bnx2x_dcbx_app_params *app = &bp->dcbx_port_params.app;
3405 struct fcoe_stats_info *fcoe_stat =
3406 &bp->slowpath->drv_info_to_mcp.fcoe_stat;
3408 if (!CNIC_LOADED(bp))
3411 memcpy(fcoe_stat->mac_local + MAC_PAD, bp->fip_mac, ETH_ALEN);
3413 fcoe_stat->qos_priority =
3414 app->traffic_type_priority[LLFC_TRAFFIC_TYPE_FCOE];
3416 /* insert FCoE stats from ramrod response */
3418 struct tstorm_per_queue_stats *fcoe_q_tstorm_stats =
3419 &bp->fw_stats_data->queue_stats[FCOE_IDX(bp)].
3420 tstorm_queue_statistics;
3422 struct xstorm_per_queue_stats *fcoe_q_xstorm_stats =
3423 &bp->fw_stats_data->queue_stats[FCOE_IDX(bp)].
3424 xstorm_queue_statistics;
3426 struct fcoe_statistics_params *fw_fcoe_stat =
3427 &bp->fw_stats_data->fcoe;
3429 ADD_64_LE(fcoe_stat->rx_bytes_hi, LE32_0,
3430 fcoe_stat->rx_bytes_lo,
3431 fw_fcoe_stat->rx_stat0.fcoe_rx_byte_cnt);
3433 ADD_64_LE(fcoe_stat->rx_bytes_hi,
3434 fcoe_q_tstorm_stats->rcv_ucast_bytes.hi,
3435 fcoe_stat->rx_bytes_lo,
3436 fcoe_q_tstorm_stats->rcv_ucast_bytes.lo);
3438 ADD_64_LE(fcoe_stat->rx_bytes_hi,
3439 fcoe_q_tstorm_stats->rcv_bcast_bytes.hi,
3440 fcoe_stat->rx_bytes_lo,
3441 fcoe_q_tstorm_stats->rcv_bcast_bytes.lo);
3443 ADD_64_LE(fcoe_stat->rx_bytes_hi,
3444 fcoe_q_tstorm_stats->rcv_mcast_bytes.hi,
3445 fcoe_stat->rx_bytes_lo,
3446 fcoe_q_tstorm_stats->rcv_mcast_bytes.lo);
3448 ADD_64_LE(fcoe_stat->rx_frames_hi, LE32_0,
3449 fcoe_stat->rx_frames_lo,
3450 fw_fcoe_stat->rx_stat0.fcoe_rx_pkt_cnt);
3452 ADD_64_LE(fcoe_stat->rx_frames_hi, LE32_0,
3453 fcoe_stat->rx_frames_lo,
3454 fcoe_q_tstorm_stats->rcv_ucast_pkts);
3456 ADD_64_LE(fcoe_stat->rx_frames_hi, LE32_0,
3457 fcoe_stat->rx_frames_lo,
3458 fcoe_q_tstorm_stats->rcv_bcast_pkts);
3460 ADD_64_LE(fcoe_stat->rx_frames_hi, LE32_0,
3461 fcoe_stat->rx_frames_lo,
3462 fcoe_q_tstorm_stats->rcv_mcast_pkts);
3464 ADD_64_LE(fcoe_stat->tx_bytes_hi, LE32_0,
3465 fcoe_stat->tx_bytes_lo,
3466 fw_fcoe_stat->tx_stat.fcoe_tx_byte_cnt);
3468 ADD_64_LE(fcoe_stat->tx_bytes_hi,
3469 fcoe_q_xstorm_stats->ucast_bytes_sent.hi,
3470 fcoe_stat->tx_bytes_lo,
3471 fcoe_q_xstorm_stats->ucast_bytes_sent.lo);
3473 ADD_64_LE(fcoe_stat->tx_bytes_hi,
3474 fcoe_q_xstorm_stats->bcast_bytes_sent.hi,
3475 fcoe_stat->tx_bytes_lo,
3476 fcoe_q_xstorm_stats->bcast_bytes_sent.lo);
3478 ADD_64_LE(fcoe_stat->tx_bytes_hi,
3479 fcoe_q_xstorm_stats->mcast_bytes_sent.hi,
3480 fcoe_stat->tx_bytes_lo,
3481 fcoe_q_xstorm_stats->mcast_bytes_sent.lo);
3483 ADD_64_LE(fcoe_stat->tx_frames_hi, LE32_0,
3484 fcoe_stat->tx_frames_lo,
3485 fw_fcoe_stat->tx_stat.fcoe_tx_pkt_cnt);
3487 ADD_64_LE(fcoe_stat->tx_frames_hi, LE32_0,
3488 fcoe_stat->tx_frames_lo,
3489 fcoe_q_xstorm_stats->ucast_pkts_sent);
3491 ADD_64_LE(fcoe_stat->tx_frames_hi, LE32_0,
3492 fcoe_stat->tx_frames_lo,
3493 fcoe_q_xstorm_stats->bcast_pkts_sent);
3495 ADD_64_LE(fcoe_stat->tx_frames_hi, LE32_0,
3496 fcoe_stat->tx_frames_lo,
3497 fcoe_q_xstorm_stats->mcast_pkts_sent);
3500 /* ask L5 driver to add data to the struct */
3501 bnx2x_cnic_notify(bp, CNIC_CTL_FCOE_STATS_GET_CMD);
3504 static void bnx2x_drv_info_iscsi_stat(struct bnx2x *bp)
3506 struct bnx2x_dcbx_app_params *app = &bp->dcbx_port_params.app;
3507 struct iscsi_stats_info *iscsi_stat =
3508 &bp->slowpath->drv_info_to_mcp.iscsi_stat;
3510 if (!CNIC_LOADED(bp))
3513 memcpy(iscsi_stat->mac_local + MAC_PAD, bp->cnic_eth_dev.iscsi_mac,
3516 iscsi_stat->qos_priority =
3517 app->traffic_type_priority[LLFC_TRAFFIC_TYPE_ISCSI];
3519 /* ask L5 driver to add data to the struct */
3520 bnx2x_cnic_notify(bp, CNIC_CTL_ISCSI_STATS_GET_CMD);
3523 /* called due to MCP event (on pmf):
3524 * reread new bandwidth configuration
3526 * notify others function about the change
3528 static void bnx2x_config_mf_bw(struct bnx2x *bp)
3530 /* Workaround for MFW bug.
3531 * MFW is not supposed to generate BW attention in
3532 * single function mode.
3536 "Ignoring MF BW config in single function mode\n");
3540 if (bp->link_vars.link_up) {
3541 bnx2x_cmng_fns_init(bp, true, CMNG_FNS_MINMAX);
3542 bnx2x_link_sync_notify(bp);
3544 storm_memset_cmng(bp, &bp->cmng, BP_PORT(bp));
3547 static void bnx2x_set_mf_bw(struct bnx2x *bp)
3549 bnx2x_config_mf_bw(bp);
3550 bnx2x_fw_command(bp, DRV_MSG_CODE_SET_MF_BW_ACK, 0);
3553 static void bnx2x_handle_eee_event(struct bnx2x *bp)
3555 DP(BNX2X_MSG_MCP, "EEE - LLDP event\n");
3556 bnx2x_fw_command(bp, DRV_MSG_CODE_EEE_RESULTS_ACK, 0);
3559 #define BNX2X_UPDATE_DRV_INFO_IND_LENGTH (20)
3560 #define BNX2X_UPDATE_DRV_INFO_IND_COUNT (25)
3562 static void bnx2x_handle_drv_info_req(struct bnx2x *bp)
3564 enum drv_info_opcode op_code;
3565 u32 drv_info_ctl = SHMEM2_RD(bp, drv_info_control);
3566 bool release = false;
3569 /* if drv_info version supported by MFW doesn't match - send NACK */
3570 if ((drv_info_ctl & DRV_INFO_CONTROL_VER_MASK) != DRV_INFO_CUR_VER) {
3571 bnx2x_fw_command(bp, DRV_MSG_CODE_DRV_INFO_NACK, 0);
3575 op_code = (drv_info_ctl & DRV_INFO_CONTROL_OP_CODE_MASK) >>
3576 DRV_INFO_CONTROL_OP_CODE_SHIFT;
3578 /* Must prevent other flows from accessing drv_info_to_mcp */
3579 mutex_lock(&bp->drv_info_mutex);
3581 memset(&bp->slowpath->drv_info_to_mcp, 0,
3582 sizeof(union drv_info_to_mcp));
3585 case ETH_STATS_OPCODE:
3586 bnx2x_drv_info_ether_stat(bp);
3588 case FCOE_STATS_OPCODE:
3589 bnx2x_drv_info_fcoe_stat(bp);
3591 case ISCSI_STATS_OPCODE:
3592 bnx2x_drv_info_iscsi_stat(bp);
3595 /* if op code isn't supported - send NACK */
3596 bnx2x_fw_command(bp, DRV_MSG_CODE_DRV_INFO_NACK, 0);
3600 /* if we got drv_info attn from MFW then these fields are defined in
3603 SHMEM2_WR(bp, drv_info_host_addr_lo,
3604 U64_LO(bnx2x_sp_mapping(bp, drv_info_to_mcp)));
3605 SHMEM2_WR(bp, drv_info_host_addr_hi,
3606 U64_HI(bnx2x_sp_mapping(bp, drv_info_to_mcp)));
3608 bnx2x_fw_command(bp, DRV_MSG_CODE_DRV_INFO_ACK, 0);
3610 /* Since possible management wants both this and get_driver_version
3611 * need to wait until management notifies us it finished utilizing
3614 if (!SHMEM2_HAS(bp, mfw_drv_indication)) {
3615 DP(BNX2X_MSG_MCP, "Management does not support indication\n");
3616 } else if (!bp->drv_info_mng_owner) {
3617 u32 bit = MFW_DRV_IND_READ_DONE_OFFSET((BP_ABS_FUNC(bp) >> 1));
3619 for (wait = 0; wait < BNX2X_UPDATE_DRV_INFO_IND_COUNT; wait++) {
3620 u32 indication = SHMEM2_RD(bp, mfw_drv_indication);
3622 /* Management is done; need to clear indication */
3623 if (indication & bit) {
3624 SHMEM2_WR(bp, mfw_drv_indication,
3630 msleep(BNX2X_UPDATE_DRV_INFO_IND_LENGTH);
3634 DP(BNX2X_MSG_MCP, "Management did not release indication\n");
3635 bp->drv_info_mng_owner = true;
3639 mutex_unlock(&bp->drv_info_mutex);
3642 static u32 bnx2x_update_mng_version_utility(u8 *version, bool bnx2x_format)
3648 i = sscanf(version, "1.%c%hhd.%hhd.%hhd",
3649 &vals[0], &vals[1], &vals[2], &vals[3]);
3653 i = sscanf(version, "%hhd.%hhd.%hhd.%hhd",
3654 &vals[0], &vals[1], &vals[2], &vals[3]);
3660 return (vals[0] << 24) | (vals[1] << 16) | (vals[2] << 8) | vals[3];
3663 void bnx2x_update_mng_version(struct bnx2x *bp)
3665 u32 iscsiver = DRV_VER_NOT_LOADED;
3666 u32 fcoever = DRV_VER_NOT_LOADED;
3667 u32 ethver = DRV_VER_NOT_LOADED;
3668 int idx = BP_FW_MB_IDX(bp);
3671 if (!SHMEM2_HAS(bp, func_os_drv_ver))
3674 mutex_lock(&bp->drv_info_mutex);
3675 /* Must not proceed when `bnx2x_handle_drv_info_req' is feasible */
3676 if (bp->drv_info_mng_owner)
3679 if (bp->state != BNX2X_STATE_OPEN)
3682 /* Parse ethernet driver version */
3683 ethver = bnx2x_update_mng_version_utility(DRV_MODULE_VERSION, true);
3684 if (!CNIC_LOADED(bp))
3687 /* Try getting storage driver version via cnic */
3688 memset(&bp->slowpath->drv_info_to_mcp, 0,
3689 sizeof(union drv_info_to_mcp));
3690 bnx2x_drv_info_iscsi_stat(bp);
3691 version = bp->slowpath->drv_info_to_mcp.iscsi_stat.version;
3692 iscsiver = bnx2x_update_mng_version_utility(version, false);
3694 memset(&bp->slowpath->drv_info_to_mcp, 0,
3695 sizeof(union drv_info_to_mcp));
3696 bnx2x_drv_info_fcoe_stat(bp);
3697 version = bp->slowpath->drv_info_to_mcp.fcoe_stat.version;
3698 fcoever = bnx2x_update_mng_version_utility(version, false);
3701 SHMEM2_WR(bp, func_os_drv_ver[idx].versions[DRV_PERS_ETHERNET], ethver);
3702 SHMEM2_WR(bp, func_os_drv_ver[idx].versions[DRV_PERS_ISCSI], iscsiver);
3703 SHMEM2_WR(bp, func_os_drv_ver[idx].versions[DRV_PERS_FCOE], fcoever);
3705 mutex_unlock(&bp->drv_info_mutex);
3707 DP(BNX2X_MSG_MCP, "Setting driver version: ETH [%08x] iSCSI [%08x] FCoE [%08x]\n",
3708 ethver, iscsiver, fcoever);
3711 void bnx2x_update_mfw_dump(struct bnx2x *bp)
3716 if (!SHMEM2_HAS(bp, drv_info))
3719 /* Update Driver load time, possibly broken in y2038 */
3720 SHMEM2_WR(bp, drv_info.epoc, (u32)ktime_get_real_seconds());
3722 drv_ver = bnx2x_update_mng_version_utility(DRV_MODULE_VERSION, true);
3723 SHMEM2_WR(bp, drv_info.drv_ver, drv_ver);
3725 SHMEM2_WR(bp, drv_info.fw_ver, REG_RD(bp, XSEM_REG_PRAM));
3727 /* Check & notify On-Chip dump. */
3728 valid_dump = SHMEM2_RD(bp, drv_info.valid_dump);
3730 if (valid_dump & FIRST_DUMP_VALID)
3731 DP(NETIF_MSG_IFUP, "A valid On-Chip MFW dump found on 1st partition\n");
3733 if (valid_dump & SECOND_DUMP_VALID)
3734 DP(NETIF_MSG_IFUP, "A valid On-Chip MFW dump found on 2nd partition\n");
3737 static void bnx2x_oem_event(struct bnx2x *bp, u32 event)
3739 u32 cmd_ok, cmd_fail;
3742 if (event & DRV_STATUS_DCC_EVENT_MASK &&
3743 event & DRV_STATUS_OEM_EVENT_MASK) {
3744 BNX2X_ERR("Received simultaneous events %08x\n", event);
3748 if (event & DRV_STATUS_DCC_EVENT_MASK) {
3749 cmd_fail = DRV_MSG_CODE_DCC_FAILURE;
3750 cmd_ok = DRV_MSG_CODE_DCC_OK;
3751 } else /* if (event & DRV_STATUS_OEM_EVENT_MASK) */ {
3752 cmd_fail = DRV_MSG_CODE_OEM_FAILURE;
3753 cmd_ok = DRV_MSG_CODE_OEM_OK;
3756 DP(BNX2X_MSG_MCP, "oem_event 0x%x\n", event);
3758 if (event & (DRV_STATUS_DCC_DISABLE_ENABLE_PF |
3759 DRV_STATUS_OEM_DISABLE_ENABLE_PF)) {
3760 /* This is the only place besides the function initialization
3761 * where the bp->flags can change so it is done without any
3764 if (bp->mf_config[BP_VN(bp)] & FUNC_MF_CFG_FUNC_DISABLED) {
3765 DP(BNX2X_MSG_MCP, "mf_cfg function disabled\n");
3766 bp->flags |= MF_FUNC_DIS;
3768 bnx2x_e1h_disable(bp);
3770 DP(BNX2X_MSG_MCP, "mf_cfg function enabled\n");
3771 bp->flags &= ~MF_FUNC_DIS;
3773 bnx2x_e1h_enable(bp);
3775 event &= ~(DRV_STATUS_DCC_DISABLE_ENABLE_PF |
3776 DRV_STATUS_OEM_DISABLE_ENABLE_PF);
3779 if (event & (DRV_STATUS_DCC_BANDWIDTH_ALLOCATION |
3780 DRV_STATUS_OEM_BANDWIDTH_ALLOCATION)) {
3781 bnx2x_config_mf_bw(bp);
3782 event &= ~(DRV_STATUS_DCC_BANDWIDTH_ALLOCATION |
3783 DRV_STATUS_OEM_BANDWIDTH_ALLOCATION);
3786 /* Report results to MCP */
3788 bnx2x_fw_command(bp, cmd_fail, 0);
3790 bnx2x_fw_command(bp, cmd_ok, 0);
3793 /* must be called under the spq lock */
3794 static struct eth_spe *bnx2x_sp_get_next(struct bnx2x *bp)
3796 struct eth_spe *next_spe = bp->spq_prod_bd;
3798 if (bp->spq_prod_bd == bp->spq_last_bd) {
3799 bp->spq_prod_bd = bp->spq;
3800 bp->spq_prod_idx = 0;
3801 DP(BNX2X_MSG_SP, "end of spq\n");
3809 /* must be called under the spq lock */
3810 static void bnx2x_sp_prod_update(struct bnx2x *bp)
3812 int func = BP_FUNC(bp);
3815 * Make sure that BD data is updated before writing the producer:
3816 * BD data is written to the memory, the producer is read from the
3817 * memory, thus we need a full memory barrier to ensure the ordering.
3821 REG_WR16_RELAXED(bp, BAR_XSTRORM_INTMEM + XSTORM_SPQ_PROD_OFFSET(func),
3826 * bnx2x_is_contextless_ramrod - check if the current command ends on EQ
3828 * @cmd: command to check
3829 * @cmd_type: command type
3831 static bool bnx2x_is_contextless_ramrod(int cmd, int cmd_type)
3833 if ((cmd_type == NONE_CONNECTION_TYPE) ||
3834 (cmd == RAMROD_CMD_ID_ETH_FORWARD_SETUP) ||
3835 (cmd == RAMROD_CMD_ID_ETH_CLASSIFICATION_RULES) ||
3836 (cmd == RAMROD_CMD_ID_ETH_FILTER_RULES) ||
3837 (cmd == RAMROD_CMD_ID_ETH_MULTICAST_RULES) ||
3838 (cmd == RAMROD_CMD_ID_ETH_SET_MAC) ||
3839 (cmd == RAMROD_CMD_ID_ETH_RSS_UPDATE))
3846 * bnx2x_sp_post - place a single command on an SP ring
3848 * @bp: driver handle
3849 * @command: command to place (e.g. SETUP, FILTER_RULES, etc.)
3850 * @cid: SW CID the command is related to
3851 * @data_hi: command private data address (high 32 bits)
3852 * @data_lo: command private data address (low 32 bits)
3853 * @cmd_type: command type (e.g. NONE, ETH)
3855 * SP data is handled as if it's always an address pair, thus data fields are
3856 * not swapped to little endian in upper functions. Instead this function swaps
3857 * data as if it's two u32 fields.
3859 int bnx2x_sp_post(struct bnx2x *bp, int command, int cid,
3860 u32 data_hi, u32 data_lo, int cmd_type)
3862 struct eth_spe *spe;
3864 bool common = bnx2x_is_contextless_ramrod(command, cmd_type);
3866 #ifdef BNX2X_STOP_ON_ERROR
3867 if (unlikely(bp->panic)) {
3868 BNX2X_ERR("Can't post SP when there is panic\n");
3873 spin_lock_bh(&bp->spq_lock);
3876 if (!atomic_read(&bp->eq_spq_left)) {
3877 BNX2X_ERR("BUG! EQ ring full!\n");
3878 spin_unlock_bh(&bp->spq_lock);
3882 } else if (!atomic_read(&bp->cq_spq_left)) {
3883 BNX2X_ERR("BUG! SPQ ring full!\n");
3884 spin_unlock_bh(&bp->spq_lock);
3889 spe = bnx2x_sp_get_next(bp);
3891 /* CID needs port number to be encoded int it */
3892 spe->hdr.conn_and_cmd_data =
3893 cpu_to_le32((command << SPE_HDR_CMD_ID_SHIFT) |
3896 /* In some cases, type may already contain the func-id
3897 * mainly in SRIOV related use cases, so we add it here only
3898 * if it's not already set.
3900 if (!(cmd_type & SPE_HDR_FUNCTION_ID)) {
3901 type = (cmd_type << SPE_HDR_CONN_TYPE_SHIFT) &
3903 type |= ((BP_FUNC(bp) << SPE_HDR_FUNCTION_ID_SHIFT) &
3904 SPE_HDR_FUNCTION_ID);
3909 spe->hdr.type = cpu_to_le16(type);
3911 spe->data.update_data_addr.hi = cpu_to_le32(data_hi);
3912 spe->data.update_data_addr.lo = cpu_to_le32(data_lo);
3915 * It's ok if the actual decrement is issued towards the memory
3916 * somewhere between the spin_lock and spin_unlock. Thus no
3917 * more explicit memory barrier is needed.
3920 atomic_dec(&bp->eq_spq_left);
3922 atomic_dec(&bp->cq_spq_left);
3925 "SPQE[%x] (%x:%x) (cmd, common?) (%d,%d) hw_cid %x data (%x:%x) type(0x%x) left (CQ, EQ) (%x,%x)\n",
3926 bp->spq_prod_idx, (u32)U64_HI(bp->spq_mapping),
3927 (u32)(U64_LO(bp->spq_mapping) +
3928 (void *)bp->spq_prod_bd - (void *)bp->spq), command, common,
3929 HW_CID(bp, cid), data_hi, data_lo, type,
3930 atomic_read(&bp->cq_spq_left), atomic_read(&bp->eq_spq_left));
3932 bnx2x_sp_prod_update(bp);
3933 spin_unlock_bh(&bp->spq_lock);
3937 /* acquire split MCP access lock register */
3938 static int bnx2x_acquire_alr(struct bnx2x *bp)
3944 for (j = 0; j < 1000; j++) {
3945 REG_WR(bp, MCP_REG_MCPR_ACCESS_LOCK, MCPR_ACCESS_LOCK_LOCK);
3946 val = REG_RD(bp, MCP_REG_MCPR_ACCESS_LOCK);
3947 if (val & MCPR_ACCESS_LOCK_LOCK)
3950 usleep_range(5000, 10000);
3952 if (!(val & MCPR_ACCESS_LOCK_LOCK)) {
3953 BNX2X_ERR("Cannot acquire MCP access lock register\n");
3960 /* release split MCP access lock register */
3961 static void bnx2x_release_alr(struct bnx2x *bp)
3963 REG_WR(bp, MCP_REG_MCPR_ACCESS_LOCK, 0);
3966 #define BNX2X_DEF_SB_ATT_IDX 0x0001
3967 #define BNX2X_DEF_SB_IDX 0x0002
3969 static u16 bnx2x_update_dsb_idx(struct bnx2x *bp)
3971 struct host_sp_status_block *def_sb = bp->def_status_blk;
3974 barrier(); /* status block is written to by the chip */
3975 if (bp->def_att_idx != def_sb->atten_status_block.attn_bits_index) {
3976 bp->def_att_idx = def_sb->atten_status_block.attn_bits_index;
3977 rc |= BNX2X_DEF_SB_ATT_IDX;
3980 if (bp->def_idx != def_sb->sp_sb.running_index) {
3981 bp->def_idx = def_sb->sp_sb.running_index;
3982 rc |= BNX2X_DEF_SB_IDX;
3985 /* Do not reorder: indices reading should complete before handling */
3991 * slow path service functions
3994 static void bnx2x_attn_int_asserted(struct bnx2x *bp, u32 asserted)
3996 int port = BP_PORT(bp);
3997 u32 aeu_addr = port ? MISC_REG_AEU_MASK_ATTN_FUNC_1 :
3998 MISC_REG_AEU_MASK_ATTN_FUNC_0;
3999 u32 nig_int_mask_addr = port ? NIG_REG_MASK_INTERRUPT_PORT1 :
4000 NIG_REG_MASK_INTERRUPT_PORT0;
4005 if (bp->attn_state & asserted)
4006 BNX2X_ERR("IGU ERROR\n");
4008 bnx2x_acquire_hw_lock(bp, HW_LOCK_RESOURCE_PORT0_ATT_MASK + port);
4009 aeu_mask = REG_RD(bp, aeu_addr);
4011 DP(NETIF_MSG_HW, "aeu_mask %x newly asserted %x\n",
4012 aeu_mask, asserted);
4013 aeu_mask &= ~(asserted & 0x3ff);
4014 DP(NETIF_MSG_HW, "new mask %x\n", aeu_mask);
4016 REG_WR(bp, aeu_addr, aeu_mask);
4017 bnx2x_release_hw_lock(bp, HW_LOCK_RESOURCE_PORT0_ATT_MASK + port);
4019 DP(NETIF_MSG_HW, "attn_state %x\n", bp->attn_state);
4020 bp->attn_state |= asserted;
4021 DP(NETIF_MSG_HW, "new state %x\n", bp->attn_state);
4023 if (asserted & ATTN_HARD_WIRED_MASK) {
4024 if (asserted & ATTN_NIG_FOR_FUNC) {
4026 bnx2x_acquire_phy_lock(bp);
4028 /* save nig interrupt mask */
4029 nig_mask = REG_RD(bp, nig_int_mask_addr);
4031 /* If nig_mask is not set, no need to call the update
4035 REG_WR(bp, nig_int_mask_addr, 0);
4037 bnx2x_link_attn(bp);
4040 /* handle unicore attn? */
4042 if (asserted & ATTN_SW_TIMER_4_FUNC)
4043 DP(NETIF_MSG_HW, "ATTN_SW_TIMER_4_FUNC!\n");
4045 if (asserted & GPIO_2_FUNC)
4046 DP(NETIF_MSG_HW, "GPIO_2_FUNC!\n");
4048 if (asserted & GPIO_3_FUNC)
4049 DP(NETIF_MSG_HW, "GPIO_3_FUNC!\n");
4051 if (asserted & GPIO_4_FUNC)
4052 DP(NETIF_MSG_HW, "GPIO_4_FUNC!\n");
4055 if (asserted & ATTN_GENERAL_ATTN_1) {
4056 DP(NETIF_MSG_HW, "ATTN_GENERAL_ATTN_1!\n");
4057 REG_WR(bp, MISC_REG_AEU_GENERAL_ATTN_1, 0x0);
4059 if (asserted & ATTN_GENERAL_ATTN_2) {
4060 DP(NETIF_MSG_HW, "ATTN_GENERAL_ATTN_2!\n");
4061 REG_WR(bp, MISC_REG_AEU_GENERAL_ATTN_2, 0x0);
4063 if (asserted & ATTN_GENERAL_ATTN_3) {
4064 DP(NETIF_MSG_HW, "ATTN_GENERAL_ATTN_3!\n");
4065 REG_WR(bp, MISC_REG_AEU_GENERAL_ATTN_3, 0x0);
4068 if (asserted & ATTN_GENERAL_ATTN_4) {
4069 DP(NETIF_MSG_HW, "ATTN_GENERAL_ATTN_4!\n");
4070 REG_WR(bp, MISC_REG_AEU_GENERAL_ATTN_4, 0x0);
4072 if (asserted & ATTN_GENERAL_ATTN_5) {
4073 DP(NETIF_MSG_HW, "ATTN_GENERAL_ATTN_5!\n");
4074 REG_WR(bp, MISC_REG_AEU_GENERAL_ATTN_5, 0x0);
4076 if (asserted & ATTN_GENERAL_ATTN_6) {
4077 DP(NETIF_MSG_HW, "ATTN_GENERAL_ATTN_6!\n");
4078 REG_WR(bp, MISC_REG_AEU_GENERAL_ATTN_6, 0x0);
4082 } /* if hardwired */
4084 if (bp->common.int_block == INT_BLOCK_HC)
4085 reg_addr = (HC_REG_COMMAND_REG + port*32 +
4086 COMMAND_REG_ATTN_BITS_SET);
4088 reg_addr = (BAR_IGU_INTMEM + IGU_CMD_ATTN_BIT_SET_UPPER*8);
4090 DP(NETIF_MSG_HW, "about to mask 0x%08x at %s addr 0x%x\n", asserted,
4091 (bp->common.int_block == INT_BLOCK_HC) ? "HC" : "IGU", reg_addr);
4092 REG_WR(bp, reg_addr, asserted);
4094 /* now set back the mask */
4095 if (asserted & ATTN_NIG_FOR_FUNC) {
4096 /* Verify that IGU ack through BAR was written before restoring
4097 * NIG mask. This loop should exit after 2-3 iterations max.
4099 if (bp->common.int_block != INT_BLOCK_HC) {
4100 u32 cnt = 0, igu_acked;
4102 igu_acked = REG_RD(bp,
4103 IGU_REG_ATTENTION_ACK_BITS);
4104 } while (((igu_acked & ATTN_NIG_FOR_FUNC) == 0) &&
4105 (++cnt < MAX_IGU_ATTN_ACK_TO));
4108 "Failed to verify IGU ack on time\n");
4111 REG_WR(bp, nig_int_mask_addr, nig_mask);
4112 bnx2x_release_phy_lock(bp);
4116 static void bnx2x_fan_failure(struct bnx2x *bp)
4118 int port = BP_PORT(bp);
4120 /* mark the failure */
4123 dev_info.port_hw_config[port].external_phy_config);
4125 ext_phy_config &= ~PORT_HW_CFG_XGXS_EXT_PHY_TYPE_MASK;
4126 ext_phy_config |= PORT_HW_CFG_XGXS_EXT_PHY_TYPE_FAILURE;
4127 SHMEM_WR(bp, dev_info.port_hw_config[port].external_phy_config,
4130 /* log the failure */
4131 netdev_err(bp->dev, "Fan Failure on Network Controller has caused the driver to shutdown the card to prevent permanent damage.\n"
4132 "Please contact OEM Support for assistance\n");
4134 /* Schedule device reset (unload)
4135 * This is due to some boards consuming sufficient power when driver is
4136 * up to overheat if fan fails.
4138 bnx2x_schedule_sp_rtnl(bp, BNX2X_SP_RTNL_FAN_FAILURE, 0);
4141 static void bnx2x_attn_int_deasserted0(struct bnx2x *bp, u32 attn)
4143 int port = BP_PORT(bp);
4147 reg_offset = (port ? MISC_REG_AEU_ENABLE1_FUNC_1_OUT_0 :
4148 MISC_REG_AEU_ENABLE1_FUNC_0_OUT_0);
4150 if (attn & AEU_INPUTS_ATTN_BITS_SPIO5) {
4152 val = REG_RD(bp, reg_offset);
4153 val &= ~AEU_INPUTS_ATTN_BITS_SPIO5;
4154 REG_WR(bp, reg_offset, val);
4156 BNX2X_ERR("SPIO5 hw attention\n");
4158 /* Fan failure attention */
4159 bnx2x_hw_reset_phy(&bp->link_params);
4160 bnx2x_fan_failure(bp);
4163 if ((attn & bp->link_vars.aeu_int_mask) && bp->port.pmf) {
4164 bnx2x_acquire_phy_lock(bp);
4165 bnx2x_handle_module_detect_int(&bp->link_params);
4166 bnx2x_release_phy_lock(bp);
4169 if (attn & HW_INTERRUPT_ASSERT_SET_0) {
4171 val = REG_RD(bp, reg_offset);
4172 val &= ~(attn & HW_INTERRUPT_ASSERT_SET_0);
4173 REG_WR(bp, reg_offset, val);
4175 BNX2X_ERR("FATAL HW block attention set0 0x%x\n",
4176 (u32)(attn & HW_INTERRUPT_ASSERT_SET_0));
4181 static void bnx2x_attn_int_deasserted1(struct bnx2x *bp, u32 attn)
4185 if (attn & AEU_INPUTS_ATTN_BITS_DOORBELLQ_HW_INTERRUPT) {
4187 val = REG_RD(bp, DORQ_REG_DORQ_INT_STS_CLR);
4188 BNX2X_ERR("DB hw attention 0x%x\n", val);
4189 /* DORQ discard attention */
4191 BNX2X_ERR("FATAL error from DORQ\n");
4194 if (attn & HW_INTERRUPT_ASSERT_SET_1) {
4196 int port = BP_PORT(bp);
4199 reg_offset = (port ? MISC_REG_AEU_ENABLE1_FUNC_1_OUT_1 :
4200 MISC_REG_AEU_ENABLE1_FUNC_0_OUT_1);
4202 val = REG_RD(bp, reg_offset);
4203 val &= ~(attn & HW_INTERRUPT_ASSERT_SET_1);
4204 REG_WR(bp, reg_offset, val);
4206 BNX2X_ERR("FATAL HW block attention set1 0x%x\n",
4207 (u32)(attn & HW_INTERRUPT_ASSERT_SET_1));
4212 static void bnx2x_attn_int_deasserted2(struct bnx2x *bp, u32 attn)
4216 if (attn & AEU_INPUTS_ATTN_BITS_CFC_HW_INTERRUPT) {
4218 val = REG_RD(bp, CFC_REG_CFC_INT_STS_CLR);
4219 BNX2X_ERR("CFC hw attention 0x%x\n", val);
4220 /* CFC error attention */
4222 BNX2X_ERR("FATAL error from CFC\n");
4225 if (attn & AEU_INPUTS_ATTN_BITS_PXP_HW_INTERRUPT) {
4226 val = REG_RD(bp, PXP_REG_PXP_INT_STS_CLR_0);
4227 BNX2X_ERR("PXP hw attention-0 0x%x\n", val);
4228 /* RQ_USDMDP_FIFO_OVERFLOW */
4230 BNX2X_ERR("FATAL error from PXP\n");
4232 if (!CHIP_IS_E1x(bp)) {
4233 val = REG_RD(bp, PXP_REG_PXP_INT_STS_CLR_1);
4234 BNX2X_ERR("PXP hw attention-1 0x%x\n", val);
4238 if (attn & HW_INTERRUPT_ASSERT_SET_2) {
4240 int port = BP_PORT(bp);
4243 reg_offset = (port ? MISC_REG_AEU_ENABLE1_FUNC_1_OUT_2 :
4244 MISC_REG_AEU_ENABLE1_FUNC_0_OUT_2);
4246 val = REG_RD(bp, reg_offset);
4247 val &= ~(attn & HW_INTERRUPT_ASSERT_SET_2);
4248 REG_WR(bp, reg_offset, val);
4250 BNX2X_ERR("FATAL HW block attention set2 0x%x\n",
4251 (u32)(attn & HW_INTERRUPT_ASSERT_SET_2));
4256 static void bnx2x_attn_int_deasserted3(struct bnx2x *bp, u32 attn)
4260 if (attn & EVEREST_GEN_ATTN_IN_USE_MASK) {
4262 if (attn & BNX2X_PMF_LINK_ASSERT) {
4263 int func = BP_FUNC(bp);
4265 REG_WR(bp, MISC_REG_AEU_GENERAL_ATTN_12 + func*4, 0);
4266 bnx2x_read_mf_cfg(bp);
4267 bp->mf_config[BP_VN(bp)] = MF_CFG_RD(bp,
4268 func_mf_config[BP_ABS_FUNC(bp)].config);
4270 func_mb[BP_FW_MB_IDX(bp)].drv_status);
4272 if (val & (DRV_STATUS_DCC_EVENT_MASK |
4273 DRV_STATUS_OEM_EVENT_MASK))
4275 (val & (DRV_STATUS_DCC_EVENT_MASK |
4276 DRV_STATUS_OEM_EVENT_MASK)));
4278 if (val & DRV_STATUS_SET_MF_BW)
4279 bnx2x_set_mf_bw(bp);
4281 if (val & DRV_STATUS_DRV_INFO_REQ)
4282 bnx2x_handle_drv_info_req(bp);
4284 if (val & DRV_STATUS_VF_DISABLED)
4285 bnx2x_schedule_iov_task(bp,
4286 BNX2X_IOV_HANDLE_FLR);
4288 if ((bp->port.pmf == 0) && (val & DRV_STATUS_PMF))
4289 bnx2x_pmf_update(bp);
4292 (val & DRV_STATUS_DCBX_NEGOTIATION_RESULTS) &&
4293 bp->dcbx_enabled > 0)
4294 /* start dcbx state machine */
4295 bnx2x_dcbx_set_params(bp,
4296 BNX2X_DCBX_STATE_NEG_RECEIVED);
4297 if (val & DRV_STATUS_AFEX_EVENT_MASK)
4298 bnx2x_handle_afex_cmd(bp,
4299 val & DRV_STATUS_AFEX_EVENT_MASK);
4300 if (val & DRV_STATUS_EEE_NEGOTIATION_RESULTS)
4301 bnx2x_handle_eee_event(bp);
4303 if (val & DRV_STATUS_OEM_UPDATE_SVID)
4304 bnx2x_schedule_sp_rtnl(bp,
4305 BNX2X_SP_RTNL_UPDATE_SVID, 0);
4307 if (bp->link_vars.periodic_flags &
4308 PERIODIC_FLAGS_LINK_EVENT) {
4309 /* sync with link */
4310 bnx2x_acquire_phy_lock(bp);
4311 bp->link_vars.periodic_flags &=
4312 ~PERIODIC_FLAGS_LINK_EVENT;
4313 bnx2x_release_phy_lock(bp);
4315 bnx2x_link_sync_notify(bp);
4316 bnx2x_link_report(bp);
4318 /* Always call it here: bnx2x_link_report() will
4319 * prevent the link indication duplication.
4321 bnx2x__link_status_update(bp);
4322 } else if (attn & BNX2X_MC_ASSERT_BITS) {
4324 BNX2X_ERR("MC assert!\n");
4325 bnx2x_mc_assert(bp);
4326 REG_WR(bp, MISC_REG_AEU_GENERAL_ATTN_10, 0);
4327 REG_WR(bp, MISC_REG_AEU_GENERAL_ATTN_9, 0);
4328 REG_WR(bp, MISC_REG_AEU_GENERAL_ATTN_8, 0);
4329 REG_WR(bp, MISC_REG_AEU_GENERAL_ATTN_7, 0);
4332 } else if (attn & BNX2X_MCP_ASSERT) {
4334 BNX2X_ERR("MCP assert!\n");
4335 REG_WR(bp, MISC_REG_AEU_GENERAL_ATTN_11, 0);
4339 BNX2X_ERR("Unknown HW assert! (attn 0x%x)\n", attn);
4342 if (attn & EVEREST_LATCHED_ATTN_IN_USE_MASK) {
4343 BNX2X_ERR("LATCHED attention 0x%08x (masked)\n", attn);
4344 if (attn & BNX2X_GRC_TIMEOUT) {
4345 val = CHIP_IS_E1(bp) ? 0 :
4346 REG_RD(bp, MISC_REG_GRC_TIMEOUT_ATTN);
4347 BNX2X_ERR("GRC time-out 0x%08x\n", val);
4349 if (attn & BNX2X_GRC_RSV) {
4350 val = CHIP_IS_E1(bp) ? 0 :
4351 REG_RD(bp, MISC_REG_GRC_RSV_ATTN);
4352 BNX2X_ERR("GRC reserved 0x%08x\n", val);
4354 REG_WR(bp, MISC_REG_AEU_CLR_LATCH_SIGNAL, 0x7ff);
4360 * 0-7 - Engine0 load counter.
4361 * 8-15 - Engine1 load counter.
4362 * 16 - Engine0 RESET_IN_PROGRESS bit.
4363 * 17 - Engine1 RESET_IN_PROGRESS bit.
4364 * 18 - Engine0 ONE_IS_LOADED. Set when there is at least one active function
4366 * 19 - Engine1 ONE_IS_LOADED.
4367 * 20 - Chip reset flow bit. When set none-leader must wait for both engines
4368 * leader to complete (check for both RESET_IN_PROGRESS bits and not for
4369 * just the one belonging to its engine).
4372 #define BNX2X_RECOVERY_GLOB_REG MISC_REG_GENERIC_POR_1
4374 #define BNX2X_PATH0_LOAD_CNT_MASK 0x000000ff
4375 #define BNX2X_PATH0_LOAD_CNT_SHIFT 0
4376 #define BNX2X_PATH1_LOAD_CNT_MASK 0x0000ff00
4377 #define BNX2X_PATH1_LOAD_CNT_SHIFT 8
4378 #define BNX2X_PATH0_RST_IN_PROG_BIT 0x00010000
4379 #define BNX2X_PATH1_RST_IN_PROG_BIT 0x00020000
4380 #define BNX2X_GLOBAL_RESET_BIT 0x00040000
4383 * Set the GLOBAL_RESET bit.
4385 * Should be run under rtnl lock
4387 void bnx2x_set_reset_global(struct bnx2x *bp)
4390 bnx2x_acquire_hw_lock(bp, HW_LOCK_RESOURCE_RECOVERY_REG);
4391 val = REG_RD(bp, BNX2X_RECOVERY_GLOB_REG);
4392 REG_WR(bp, BNX2X_RECOVERY_GLOB_REG, val | BNX2X_GLOBAL_RESET_BIT);
4393 bnx2x_release_hw_lock(bp, HW_LOCK_RESOURCE_RECOVERY_REG);
4397 * Clear the GLOBAL_RESET bit.
4399 * Should be run under rtnl lock
4401 static void bnx2x_clear_reset_global(struct bnx2x *bp)
4404 bnx2x_acquire_hw_lock(bp, HW_LOCK_RESOURCE_RECOVERY_REG);
4405 val = REG_RD(bp, BNX2X_RECOVERY_GLOB_REG);
4406 REG_WR(bp, BNX2X_RECOVERY_GLOB_REG, val & (~BNX2X_GLOBAL_RESET_BIT));
4407 bnx2x_release_hw_lock(bp, HW_LOCK_RESOURCE_RECOVERY_REG);
4411 * Checks the GLOBAL_RESET bit.
4413 * should be run under rtnl lock
4415 static bool bnx2x_reset_is_global(struct bnx2x *bp)
4417 u32 val = REG_RD(bp, BNX2X_RECOVERY_GLOB_REG);
4419 DP(NETIF_MSG_HW, "GEN_REG_VAL=0x%08x\n", val);
4420 return (val & BNX2X_GLOBAL_RESET_BIT) ? true : false;
4424 * Clear RESET_IN_PROGRESS bit for the current engine.
4426 * Should be run under rtnl lock
4428 static void bnx2x_set_reset_done(struct bnx2x *bp)
4431 u32 bit = BP_PATH(bp) ?
4432 BNX2X_PATH1_RST_IN_PROG_BIT : BNX2X_PATH0_RST_IN_PROG_BIT;
4433 bnx2x_acquire_hw_lock(bp, HW_LOCK_RESOURCE_RECOVERY_REG);
4434 val = REG_RD(bp, BNX2X_RECOVERY_GLOB_REG);
4438 REG_WR(bp, BNX2X_RECOVERY_GLOB_REG, val);
4440 bnx2x_release_hw_lock(bp, HW_LOCK_RESOURCE_RECOVERY_REG);
4444 * Set RESET_IN_PROGRESS for the current engine.
4446 * should be run under rtnl lock
4448 void bnx2x_set_reset_in_progress(struct bnx2x *bp)
4451 u32 bit = BP_PATH(bp) ?
4452 BNX2X_PATH1_RST_IN_PROG_BIT : BNX2X_PATH0_RST_IN_PROG_BIT;
4453 bnx2x_acquire_hw_lock(bp, HW_LOCK_RESOURCE_RECOVERY_REG);
4454 val = REG_RD(bp, BNX2X_RECOVERY_GLOB_REG);
4458 REG_WR(bp, BNX2X_RECOVERY_GLOB_REG, val);
4459 bnx2x_release_hw_lock(bp, HW_LOCK_RESOURCE_RECOVERY_REG);
4463 * Checks the RESET_IN_PROGRESS bit for the given engine.
4464 * should be run under rtnl lock
4466 bool bnx2x_reset_is_done(struct bnx2x *bp, int engine)
4468 u32 val = REG_RD(bp, BNX2X_RECOVERY_GLOB_REG);
4470 BNX2X_PATH1_RST_IN_PROG_BIT : BNX2X_PATH0_RST_IN_PROG_BIT;
4472 /* return false if bit is set */
4473 return (val & bit) ? false : true;
4477 * set pf load for the current pf.
4479 * should be run under rtnl lock
4481 void bnx2x_set_pf_load(struct bnx2x *bp)
4484 u32 mask = BP_PATH(bp) ? BNX2X_PATH1_LOAD_CNT_MASK :
4485 BNX2X_PATH0_LOAD_CNT_MASK;
4486 u32 shift = BP_PATH(bp) ? BNX2X_PATH1_LOAD_CNT_SHIFT :
4487 BNX2X_PATH0_LOAD_CNT_SHIFT;
4489 bnx2x_acquire_hw_lock(bp, HW_LOCK_RESOURCE_RECOVERY_REG);
4490 val = REG_RD(bp, BNX2X_RECOVERY_GLOB_REG);
4492 DP(NETIF_MSG_IFUP, "Old GEN_REG_VAL=0x%08x\n", val);
4494 /* get the current counter value */
4495 val1 = (val & mask) >> shift;
4497 /* set bit of that PF */
4498 val1 |= (1 << bp->pf_num);
4500 /* clear the old value */
4503 /* set the new one */
4504 val |= ((val1 << shift) & mask);
4506 REG_WR(bp, BNX2X_RECOVERY_GLOB_REG, val);
4507 bnx2x_release_hw_lock(bp, HW_LOCK_RESOURCE_RECOVERY_REG);
4511 * bnx2x_clear_pf_load - clear pf load mark
4513 * @bp: driver handle
4515 * Should be run under rtnl lock.
4516 * Decrements the load counter for the current engine. Returns
4517 * whether other functions are still loaded
4519 bool bnx2x_clear_pf_load(struct bnx2x *bp)
4522 u32 mask = BP_PATH(bp) ? BNX2X_PATH1_LOAD_CNT_MASK :
4523 BNX2X_PATH0_LOAD_CNT_MASK;
4524 u32 shift = BP_PATH(bp) ? BNX2X_PATH1_LOAD_CNT_SHIFT :
4525 BNX2X_PATH0_LOAD_CNT_SHIFT;
4527 bnx2x_acquire_hw_lock(bp, HW_LOCK_RESOURCE_RECOVERY_REG);
4528 val = REG_RD(bp, BNX2X_RECOVERY_GLOB_REG);
4529 DP(NETIF_MSG_IFDOWN, "Old GEN_REG_VAL=0x%08x\n", val);
4531 /* get the current counter value */
4532 val1 = (val & mask) >> shift;
4534 /* clear bit of that PF */
4535 val1 &= ~(1 << bp->pf_num);
4537 /* clear the old value */
4540 /* set the new one */
4541 val |= ((val1 << shift) & mask);
4543 REG_WR(bp, BNX2X_RECOVERY_GLOB_REG, val);
4544 bnx2x_release_hw_lock(bp, HW_LOCK_RESOURCE_RECOVERY_REG);
4549 * Read the load status for the current engine.
4551 * should be run under rtnl lock
4553 static bool bnx2x_get_load_status(struct bnx2x *bp, int engine)
4555 u32 mask = (engine ? BNX2X_PATH1_LOAD_CNT_MASK :
4556 BNX2X_PATH0_LOAD_CNT_MASK);
4557 u32 shift = (engine ? BNX2X_PATH1_LOAD_CNT_SHIFT :
4558 BNX2X_PATH0_LOAD_CNT_SHIFT);
4559 u32 val = REG_RD(bp, BNX2X_RECOVERY_GLOB_REG);
4561 DP(NETIF_MSG_HW | NETIF_MSG_IFUP, "GLOB_REG=0x%08x\n", val);
4563 val = (val & mask) >> shift;
4565 DP(NETIF_MSG_HW | NETIF_MSG_IFUP, "load mask for engine %d = 0x%x\n",
4571 static void _print_parity(struct bnx2x *bp, u32 reg)
4573 pr_cont(" [0x%08x] ", REG_RD(bp, reg));
4576 static void _print_next_block(int idx, const char *blk)
4578 pr_cont("%s%s", idx ? ", " : "", blk);
4581 static bool bnx2x_check_blocks_with_parity0(struct bnx2x *bp, u32 sig,
4582 int *par_num, bool print)
4590 for (i = 0; sig; i++) {
4591 cur_bit = (0x1UL << i);
4592 if (sig & cur_bit) {
4593 res |= true; /* Each bit is real error! */
4597 case AEU_INPUTS_ATTN_BITS_BRB_PARITY_ERROR:
4598 _print_next_block((*par_num)++, "BRB");
4600 BRB1_REG_BRB1_PRTY_STS);
4602 case AEU_INPUTS_ATTN_BITS_PARSER_PARITY_ERROR:
4603 _print_next_block((*par_num)++,
4605 _print_parity(bp, PRS_REG_PRS_PRTY_STS);
4607 case AEU_INPUTS_ATTN_BITS_TSDM_PARITY_ERROR:
4608 _print_next_block((*par_num)++, "TSDM");
4610 TSDM_REG_TSDM_PRTY_STS);
4612 case AEU_INPUTS_ATTN_BITS_SEARCHER_PARITY_ERROR:
4613 _print_next_block((*par_num)++,
4615 _print_parity(bp, SRC_REG_SRC_PRTY_STS);
4617 case AEU_INPUTS_ATTN_BITS_TCM_PARITY_ERROR:
4618 _print_next_block((*par_num)++, "TCM");
4619 _print_parity(bp, TCM_REG_TCM_PRTY_STS);
4621 case AEU_INPUTS_ATTN_BITS_TSEMI_PARITY_ERROR:
4622 _print_next_block((*par_num)++,
4625 TSEM_REG_TSEM_PRTY_STS_0);
4627 TSEM_REG_TSEM_PRTY_STS_1);
4629 case AEU_INPUTS_ATTN_BITS_PBCLIENT_PARITY_ERROR:
4630 _print_next_block((*par_num)++, "XPB");
4631 _print_parity(bp, GRCBASE_XPB +
4632 PB_REG_PB_PRTY_STS);
4645 static bool bnx2x_check_blocks_with_parity1(struct bnx2x *bp, u32 sig,
4646 int *par_num, bool *global,
4655 for (i = 0; sig; i++) {
4656 cur_bit = (0x1UL << i);
4657 if (sig & cur_bit) {
4658 res |= true; /* Each bit is real error! */
4660 case AEU_INPUTS_ATTN_BITS_PBF_PARITY_ERROR:
4662 _print_next_block((*par_num)++, "PBF");
4663 _print_parity(bp, PBF_REG_PBF_PRTY_STS);
4666 case AEU_INPUTS_ATTN_BITS_QM_PARITY_ERROR:
4668 _print_next_block((*par_num)++, "QM");
4669 _print_parity(bp, QM_REG_QM_PRTY_STS);
4672 case AEU_INPUTS_ATTN_BITS_TIMERS_PARITY_ERROR:
4674 _print_next_block((*par_num)++, "TM");
4675 _print_parity(bp, TM_REG_TM_PRTY_STS);
4678 case AEU_INPUTS_ATTN_BITS_XSDM_PARITY_ERROR:
4680 _print_next_block((*par_num)++, "XSDM");
4682 XSDM_REG_XSDM_PRTY_STS);
4685 case AEU_INPUTS_ATTN_BITS_XCM_PARITY_ERROR:
4687 _print_next_block((*par_num)++, "XCM");
4688 _print_parity(bp, XCM_REG_XCM_PRTY_STS);
4691 case AEU_INPUTS_ATTN_BITS_XSEMI_PARITY_ERROR:
4693 _print_next_block((*par_num)++,
4696 XSEM_REG_XSEM_PRTY_STS_0);
4698 XSEM_REG_XSEM_PRTY_STS_1);
4701 case AEU_INPUTS_ATTN_BITS_DOORBELLQ_PARITY_ERROR:
4703 _print_next_block((*par_num)++,
4706 DORQ_REG_DORQ_PRTY_STS);
4709 case AEU_INPUTS_ATTN_BITS_NIG_PARITY_ERROR:
4711 _print_next_block((*par_num)++, "NIG");
4712 if (CHIP_IS_E1x(bp)) {
4714 NIG_REG_NIG_PRTY_STS);
4717 NIG_REG_NIG_PRTY_STS_0);
4719 NIG_REG_NIG_PRTY_STS_1);
4723 case AEU_INPUTS_ATTN_BITS_VAUX_PCI_CORE_PARITY_ERROR:
4725 _print_next_block((*par_num)++,
4729 case AEU_INPUTS_ATTN_BITS_DEBUG_PARITY_ERROR:
4731 _print_next_block((*par_num)++,
4733 _print_parity(bp, DBG_REG_DBG_PRTY_STS);
4736 case AEU_INPUTS_ATTN_BITS_USDM_PARITY_ERROR:
4738 _print_next_block((*par_num)++, "USDM");
4740 USDM_REG_USDM_PRTY_STS);
4743 case AEU_INPUTS_ATTN_BITS_UCM_PARITY_ERROR:
4745 _print_next_block((*par_num)++, "UCM");
4746 _print_parity(bp, UCM_REG_UCM_PRTY_STS);
4749 case AEU_INPUTS_ATTN_BITS_USEMI_PARITY_ERROR:
4751 _print_next_block((*par_num)++,
4754 USEM_REG_USEM_PRTY_STS_0);
4756 USEM_REG_USEM_PRTY_STS_1);
4759 case AEU_INPUTS_ATTN_BITS_UPB_PARITY_ERROR:
4761 _print_next_block((*par_num)++, "UPB");
4762 _print_parity(bp, GRCBASE_UPB +
4763 PB_REG_PB_PRTY_STS);
4766 case AEU_INPUTS_ATTN_BITS_CSDM_PARITY_ERROR:
4768 _print_next_block((*par_num)++, "CSDM");
4770 CSDM_REG_CSDM_PRTY_STS);
4773 case AEU_INPUTS_ATTN_BITS_CCM_PARITY_ERROR:
4775 _print_next_block((*par_num)++, "CCM");
4776 _print_parity(bp, CCM_REG_CCM_PRTY_STS);
4789 static bool bnx2x_check_blocks_with_parity2(struct bnx2x *bp, u32 sig,
4790 int *par_num, bool print)
4798 for (i = 0; sig; i++) {
4799 cur_bit = (0x1UL << i);
4800 if (sig & cur_bit) {
4801 res = true; /* Each bit is real error! */
4804 case AEU_INPUTS_ATTN_BITS_CSEMI_PARITY_ERROR:
4805 _print_next_block((*par_num)++,
4808 CSEM_REG_CSEM_PRTY_STS_0);
4810 CSEM_REG_CSEM_PRTY_STS_1);
4812 case AEU_INPUTS_ATTN_BITS_PXP_PARITY_ERROR:
4813 _print_next_block((*par_num)++, "PXP");
4814 _print_parity(bp, PXP_REG_PXP_PRTY_STS);
4816 PXP2_REG_PXP2_PRTY_STS_0);
4818 PXP2_REG_PXP2_PRTY_STS_1);
4820 case AEU_IN_ATTN_BITS_PXPPCICLOCKCLIENT_PARITY_ERROR:
4821 _print_next_block((*par_num)++,
4822 "PXPPCICLOCKCLIENT");
4824 case AEU_INPUTS_ATTN_BITS_CFC_PARITY_ERROR:
4825 _print_next_block((*par_num)++, "CFC");
4827 CFC_REG_CFC_PRTY_STS);
4829 case AEU_INPUTS_ATTN_BITS_CDU_PARITY_ERROR:
4830 _print_next_block((*par_num)++, "CDU");
4831 _print_parity(bp, CDU_REG_CDU_PRTY_STS);
4833 case AEU_INPUTS_ATTN_BITS_DMAE_PARITY_ERROR:
4834 _print_next_block((*par_num)++, "DMAE");
4836 DMAE_REG_DMAE_PRTY_STS);
4838 case AEU_INPUTS_ATTN_BITS_IGU_PARITY_ERROR:
4839 _print_next_block((*par_num)++, "IGU");
4840 if (CHIP_IS_E1x(bp))
4842 HC_REG_HC_PRTY_STS);
4845 IGU_REG_IGU_PRTY_STS);
4847 case AEU_INPUTS_ATTN_BITS_MISC_PARITY_ERROR:
4848 _print_next_block((*par_num)++, "MISC");
4850 MISC_REG_MISC_PRTY_STS);
4863 static bool bnx2x_check_blocks_with_parity3(struct bnx2x *bp, u32 sig,
4864 int *par_num, bool *global,
4871 for (i = 0; sig; i++) {
4872 cur_bit = (0x1UL << i);
4873 if (sig & cur_bit) {
4875 case AEU_INPUTS_ATTN_BITS_MCP_LATCHED_ROM_PARITY:
4877 _print_next_block((*par_num)++,
4882 case AEU_INPUTS_ATTN_BITS_MCP_LATCHED_UMP_RX_PARITY:
4884 _print_next_block((*par_num)++,
4889 case AEU_INPUTS_ATTN_BITS_MCP_LATCHED_UMP_TX_PARITY:
4891 _print_next_block((*par_num)++,
4896 case AEU_INPUTS_ATTN_BITS_MCP_LATCHED_SCPAD_PARITY:
4898 /* clear latched SCPAD PATIRY from MCP */
4899 REG_WR(bp, MISC_REG_AEU_CLR_LATCH_SIGNAL,
4912 static bool bnx2x_check_blocks_with_parity4(struct bnx2x *bp, u32 sig,
4913 int *par_num, bool print)
4921 for (i = 0; sig; i++) {
4922 cur_bit = (0x1UL << i);
4923 if (sig & cur_bit) {
4924 res = true; /* Each bit is real error! */
4927 case AEU_INPUTS_ATTN_BITS_PGLUE_PARITY_ERROR:
4928 _print_next_block((*par_num)++,
4931 PGLUE_B_REG_PGLUE_B_PRTY_STS);
4933 case AEU_INPUTS_ATTN_BITS_ATC_PARITY_ERROR:
4934 _print_next_block((*par_num)++, "ATC");
4936 ATC_REG_ATC_PRTY_STS);
4948 static bool bnx2x_parity_attn(struct bnx2x *bp, bool *global, bool print,
4953 if ((sig[0] & HW_PRTY_ASSERT_SET_0) ||
4954 (sig[1] & HW_PRTY_ASSERT_SET_1) ||
4955 (sig[2] & HW_PRTY_ASSERT_SET_2) ||
4956 (sig[3] & HW_PRTY_ASSERT_SET_3) ||
4957 (sig[4] & HW_PRTY_ASSERT_SET_4)) {
4960 DP(NETIF_MSG_HW, "Was parity error: HW block parity attention:\n"
4961 "[0]:0x%08x [1]:0x%08x [2]:0x%08x [3]:0x%08x [4]:0x%08x\n",
4962 sig[0] & HW_PRTY_ASSERT_SET_0,
4963 sig[1] & HW_PRTY_ASSERT_SET_1,
4964 sig[2] & HW_PRTY_ASSERT_SET_2,
4965 sig[3] & HW_PRTY_ASSERT_SET_3,
4966 sig[4] & HW_PRTY_ASSERT_SET_4);
4968 if (((sig[0] & HW_PRTY_ASSERT_SET_0) ||
4969 (sig[1] & HW_PRTY_ASSERT_SET_1) ||
4970 (sig[2] & HW_PRTY_ASSERT_SET_2) ||
4971 (sig[4] & HW_PRTY_ASSERT_SET_4)) ||
4972 (sig[3] & HW_PRTY_ASSERT_SET_3_WITHOUT_SCPAD)) {
4974 "Parity errors detected in blocks: ");
4979 res |= bnx2x_check_blocks_with_parity0(bp,
4980 sig[0] & HW_PRTY_ASSERT_SET_0, &par_num, print);
4981 res |= bnx2x_check_blocks_with_parity1(bp,
4982 sig[1] & HW_PRTY_ASSERT_SET_1, &par_num, global, print);
4983 res |= bnx2x_check_blocks_with_parity2(bp,
4984 sig[2] & HW_PRTY_ASSERT_SET_2, &par_num, print);
4985 res |= bnx2x_check_blocks_with_parity3(bp,
4986 sig[3] & HW_PRTY_ASSERT_SET_3, &par_num, global, print);
4987 res |= bnx2x_check_blocks_with_parity4(bp,
4988 sig[4] & HW_PRTY_ASSERT_SET_4, &par_num, print);
4998 * bnx2x_chk_parity_attn - checks for parity attentions.
5000 * @bp: driver handle
5001 * @global: true if there was a global attention
5002 * @print: show parity attention in syslog
5004 bool bnx2x_chk_parity_attn(struct bnx2x *bp, bool *global, bool print)
5006 struct attn_route attn = { {0} };
5007 int port = BP_PORT(bp);
5009 attn.sig[0] = REG_RD(bp,
5010 MISC_REG_AEU_AFTER_INVERT_1_FUNC_0 +
5012 attn.sig[1] = REG_RD(bp,
5013 MISC_REG_AEU_AFTER_INVERT_2_FUNC_0 +
5015 attn.sig[2] = REG_RD(bp,
5016 MISC_REG_AEU_AFTER_INVERT_3_FUNC_0 +
5018 attn.sig[3] = REG_RD(bp,
5019 MISC_REG_AEU_AFTER_INVERT_4_FUNC_0 +
5021 /* Since MCP attentions can't be disabled inside the block, we need to
5022 * read AEU registers to see whether they're currently disabled
5024 attn.sig[3] &= ((REG_RD(bp,
5025 !port ? MISC_REG_AEU_ENABLE4_FUNC_0_OUT_0
5026 : MISC_REG_AEU_ENABLE4_FUNC_1_OUT_0) &
5027 MISC_AEU_ENABLE_MCP_PRTY_BITS) |
5028 ~MISC_AEU_ENABLE_MCP_PRTY_BITS);
5030 if (!CHIP_IS_E1x(bp))
5031 attn.sig[4] = REG_RD(bp,
5032 MISC_REG_AEU_AFTER_INVERT_5_FUNC_0 +
5035 return bnx2x_parity_attn(bp, global, print, attn.sig);
5038 static void bnx2x_attn_int_deasserted4(struct bnx2x *bp, u32 attn)
5041 if (attn & AEU_INPUTS_ATTN_BITS_PGLUE_HW_INTERRUPT) {
5043 val = REG_RD(bp, PGLUE_B_REG_PGLUE_B_INT_STS_CLR);
5044 BNX2X_ERR("PGLUE hw attention 0x%x\n", val);
5045 if (val & PGLUE_B_PGLUE_B_INT_STS_REG_ADDRESS_ERROR)
5046 BNX2X_ERR("PGLUE_B_PGLUE_B_INT_STS_REG_ADDRESS_ERROR\n");
5047 if (val & PGLUE_B_PGLUE_B_INT_STS_REG_INCORRECT_RCV_BEHAVIOR)
5048 BNX2X_ERR("PGLUE_B_PGLUE_B_INT_STS_REG_INCORRECT_RCV_BEHAVIOR\n");
5049 if (val & PGLUE_B_PGLUE_B_INT_STS_REG_WAS_ERROR_ATTN)
5050 BNX2X_ERR("PGLUE_B_PGLUE_B_INT_STS_REG_WAS_ERROR_ATTN\n");
5051 if (val & PGLUE_B_PGLUE_B_INT_STS_REG_VF_LENGTH_VIOLATION_ATTN)
5052 BNX2X_ERR("PGLUE_B_PGLUE_B_INT_STS_REG_VF_LENGTH_VIOLATION_ATTN\n");
5054 PGLUE_B_PGLUE_B_INT_STS_REG_VF_GRC_SPACE_VIOLATION_ATTN)
5055 BNX2X_ERR("PGLUE_B_PGLUE_B_INT_STS_REG_VF_GRC_SPACE_VIOLATION_ATTN\n");
5057 PGLUE_B_PGLUE_B_INT_STS_REG_VF_MSIX_BAR_VIOLATION_ATTN)
5058 BNX2X_ERR("PGLUE_B_PGLUE_B_INT_STS_REG_VF_MSIX_BAR_VIOLATION_ATTN\n");
5059 if (val & PGLUE_B_PGLUE_B_INT_STS_REG_TCPL_ERROR_ATTN)
5060 BNX2X_ERR("PGLUE_B_PGLUE_B_INT_STS_REG_TCPL_ERROR_ATTN\n");
5061 if (val & PGLUE_B_PGLUE_B_INT_STS_REG_TCPL_IN_TWO_RCBS_ATTN)
5062 BNX2X_ERR("PGLUE_B_PGLUE_B_INT_STS_REG_TCPL_IN_TWO_RCBS_ATTN\n");
5063 if (val & PGLUE_B_PGLUE_B_INT_STS_REG_CSSNOOP_FIFO_OVERFLOW)
5064 BNX2X_ERR("PGLUE_B_PGLUE_B_INT_STS_REG_CSSNOOP_FIFO_OVERFLOW\n");
5066 if (attn & AEU_INPUTS_ATTN_BITS_ATC_HW_INTERRUPT) {
5067 val = REG_RD(bp, ATC_REG_ATC_INT_STS_CLR);
5068 BNX2X_ERR("ATC hw attention 0x%x\n", val);
5069 if (val & ATC_ATC_INT_STS_REG_ADDRESS_ERROR)
5070 BNX2X_ERR("ATC_ATC_INT_STS_REG_ADDRESS_ERROR\n");
5071 if (val & ATC_ATC_INT_STS_REG_ATC_TCPL_TO_NOT_PEND)
5072 BNX2X_ERR("ATC_ATC_INT_STS_REG_ATC_TCPL_TO_NOT_PEND\n");
5073 if (val & ATC_ATC_INT_STS_REG_ATC_GPA_MULTIPLE_HITS)
5074 BNX2X_ERR("ATC_ATC_INT_STS_REG_ATC_GPA_MULTIPLE_HITS\n");
5075 if (val & ATC_ATC_INT_STS_REG_ATC_RCPL_TO_EMPTY_CNT)
5076 BNX2X_ERR("ATC_ATC_INT_STS_REG_ATC_RCPL_TO_EMPTY_CNT\n");
5077 if (val & ATC_ATC_INT_STS_REG_ATC_TCPL_ERROR)
5078 BNX2X_ERR("ATC_ATC_INT_STS_REG_ATC_TCPL_ERROR\n");
5079 if (val & ATC_ATC_INT_STS_REG_ATC_IREQ_LESS_THAN_STU)
5080 BNX2X_ERR("ATC_ATC_INT_STS_REG_ATC_IREQ_LESS_THAN_STU\n");
5083 if (attn & (AEU_INPUTS_ATTN_BITS_PGLUE_PARITY_ERROR |
5084 AEU_INPUTS_ATTN_BITS_ATC_PARITY_ERROR)) {
5085 BNX2X_ERR("FATAL parity attention set4 0x%x\n",
5086 (u32)(attn & (AEU_INPUTS_ATTN_BITS_PGLUE_PARITY_ERROR |
5087 AEU_INPUTS_ATTN_BITS_ATC_PARITY_ERROR)));
5091 static void bnx2x_attn_int_deasserted(struct bnx2x *bp, u32 deasserted)
5093 struct attn_route attn, *group_mask;
5094 int port = BP_PORT(bp);
5099 bool global = false;
5101 /* need to take HW lock because MCP or other port might also
5102 try to handle this event */
5103 bnx2x_acquire_alr(bp);
5105 if (bnx2x_chk_parity_attn(bp, &global, true)) {
5106 #ifndef BNX2X_STOP_ON_ERROR
5107 bp->recovery_state = BNX2X_RECOVERY_INIT;
5108 schedule_delayed_work(&bp->sp_rtnl_task, 0);
5109 /* Disable HW interrupts */
5110 bnx2x_int_disable(bp);
5111 /* In case of parity errors don't handle attentions so that
5112 * other function would "see" parity errors.
5117 bnx2x_release_alr(bp);
5121 attn.sig[0] = REG_RD(bp, MISC_REG_AEU_AFTER_INVERT_1_FUNC_0 + port*4);
5122 attn.sig[1] = REG_RD(bp, MISC_REG_AEU_AFTER_INVERT_2_FUNC_0 + port*4);
5123 attn.sig[2] = REG_RD(bp, MISC_REG_AEU_AFTER_INVERT_3_FUNC_0 + port*4);
5124 attn.sig[3] = REG_RD(bp, MISC_REG_AEU_AFTER_INVERT_4_FUNC_0 + port*4);
5125 if (!CHIP_IS_E1x(bp))
5127 REG_RD(bp, MISC_REG_AEU_AFTER_INVERT_5_FUNC_0 + port*4);
5131 DP(NETIF_MSG_HW, "attn: %08x %08x %08x %08x %08x\n",
5132 attn.sig[0], attn.sig[1], attn.sig[2], attn.sig[3], attn.sig[4]);
5134 for (index = 0; index < MAX_DYNAMIC_ATTN_GRPS; index++) {
5135 if (deasserted & (1 << index)) {
5136 group_mask = &bp->attn_group[index];
5138 DP(NETIF_MSG_HW, "group[%d]: %08x %08x %08x %08x %08x\n",
5140 group_mask->sig[0], group_mask->sig[1],
5141 group_mask->sig[2], group_mask->sig[3],
5142 group_mask->sig[4]);
5144 bnx2x_attn_int_deasserted4(bp,
5145 attn.sig[4] & group_mask->sig[4]);
5146 bnx2x_attn_int_deasserted3(bp,
5147 attn.sig[3] & group_mask->sig[3]);
5148 bnx2x_attn_int_deasserted1(bp,
5149 attn.sig[1] & group_mask->sig[1]);
5150 bnx2x_attn_int_deasserted2(bp,
5151 attn.sig[2] & group_mask->sig[2]);
5152 bnx2x_attn_int_deasserted0(bp,
5153 attn.sig[0] & group_mask->sig[0]);
5157 bnx2x_release_alr(bp);
5159 if (bp->common.int_block == INT_BLOCK_HC)
5160 reg_addr = (HC_REG_COMMAND_REG + port*32 +
5161 COMMAND_REG_ATTN_BITS_CLR);
5163 reg_addr = (BAR_IGU_INTMEM + IGU_CMD_ATTN_BIT_CLR_UPPER*8);
5166 DP(NETIF_MSG_HW, "about to mask 0x%08x at %s addr 0x%x\n", val,
5167 (bp->common.int_block == INT_BLOCK_HC) ? "HC" : "IGU", reg_addr);
5168 REG_WR(bp, reg_addr, val);
5170 if (~bp->attn_state & deasserted)
5171 BNX2X_ERR("IGU ERROR\n");
5173 reg_addr = port ? MISC_REG_AEU_MASK_ATTN_FUNC_1 :
5174 MISC_REG_AEU_MASK_ATTN_FUNC_0;
5176 bnx2x_acquire_hw_lock(bp, HW_LOCK_RESOURCE_PORT0_ATT_MASK + port);
5177 aeu_mask = REG_RD(bp, reg_addr);
5179 DP(NETIF_MSG_HW, "aeu_mask %x newly deasserted %x\n",
5180 aeu_mask, deasserted);
5181 aeu_mask |= (deasserted & 0x3ff);
5182 DP(NETIF_MSG_HW, "new mask %x\n", aeu_mask);
5184 REG_WR(bp, reg_addr, aeu_mask);
5185 bnx2x_release_hw_lock(bp, HW_LOCK_RESOURCE_PORT0_ATT_MASK + port);
5187 DP(NETIF_MSG_HW, "attn_state %x\n", bp->attn_state);
5188 bp->attn_state &= ~deasserted;
5189 DP(NETIF_MSG_HW, "new state %x\n", bp->attn_state);
5192 static void bnx2x_attn_int(struct bnx2x *bp)
5194 /* read local copy of bits */
5195 u32 attn_bits = le32_to_cpu(bp->def_status_blk->atten_status_block.
5197 u32 attn_ack = le32_to_cpu(bp->def_status_blk->atten_status_block.
5199 u32 attn_state = bp->attn_state;
5201 /* look for changed bits */
5202 u32 asserted = attn_bits & ~attn_ack & ~attn_state;
5203 u32 deasserted = ~attn_bits & attn_ack & attn_state;
5206 "attn_bits %x attn_ack %x asserted %x deasserted %x\n",
5207 attn_bits, attn_ack, asserted, deasserted);
5209 if (~(attn_bits ^ attn_ack) & (attn_bits ^ attn_state))
5210 BNX2X_ERR("BAD attention state\n");
5212 /* handle bits that were raised */
5214 bnx2x_attn_int_asserted(bp, asserted);
5217 bnx2x_attn_int_deasserted(bp, deasserted);
5220 void bnx2x_igu_ack_sb(struct bnx2x *bp, u8 igu_sb_id, u8 segment,
5221 u16 index, u8 op, u8 update)
5223 u32 igu_addr = bp->igu_base_addr;
5224 igu_addr += (IGU_CMD_INT_ACK_BASE + igu_sb_id)*8;
5225 bnx2x_igu_ack_sb_gen(bp, igu_sb_id, segment, index, op, update,
5229 static void bnx2x_update_eq_prod(struct bnx2x *bp, u16 prod)
5231 /* No memory barriers */
5232 storm_memset_eq_prod(bp, prod, BP_FUNC(bp));
5235 static int bnx2x_cnic_handle_cfc_del(struct bnx2x *bp, u32 cid,
5236 union event_ring_elem *elem)
5238 u8 err = elem->message.error;
5240 if (!bp->cnic_eth_dev.starting_cid ||
5241 (cid < bp->cnic_eth_dev.starting_cid &&
5242 cid != bp->cnic_eth_dev.iscsi_l2_cid))
5245 DP(BNX2X_MSG_SP, "got delete ramrod for CNIC CID %d\n", cid);
5247 if (unlikely(err)) {
5249 BNX2X_ERR("got delete ramrod for CNIC CID %d with error!\n",
5251 bnx2x_panic_dump(bp, false);
5253 bnx2x_cnic_cfc_comp(bp, cid, err);
5257 static void bnx2x_handle_mcast_eqe(struct bnx2x *bp)
5259 struct bnx2x_mcast_ramrod_params rparam;
5262 memset(&rparam, 0, sizeof(rparam));
5264 rparam.mcast_obj = &bp->mcast_obj;
5266 netif_addr_lock_bh(bp->dev);
5268 /* Clear pending state for the last command */
5269 bp->mcast_obj.raw.clear_pending(&bp->mcast_obj.raw);
5271 /* If there are pending mcast commands - send them */
5272 if (bp->mcast_obj.check_pending(&bp->mcast_obj)) {
5273 rc = bnx2x_config_mcast(bp, &rparam, BNX2X_MCAST_CMD_CONT);
5275 BNX2X_ERR("Failed to send pending mcast commands: %d\n",
5279 netif_addr_unlock_bh(bp->dev);
5282 static void bnx2x_handle_classification_eqe(struct bnx2x *bp,
5283 union event_ring_elem *elem)
5285 unsigned long ramrod_flags = 0;
5287 u32 echo = le32_to_cpu(elem->message.data.eth_event.echo);
5288 u32 cid = echo & BNX2X_SWCID_MASK;
5289 struct bnx2x_vlan_mac_obj *vlan_mac_obj;
5291 /* Always push next commands out, don't wait here */
5292 __set_bit(RAMROD_CONT, &ramrod_flags);
5294 switch (echo >> BNX2X_SWCID_SHIFT) {
5295 case BNX2X_FILTER_MAC_PENDING:
5296 DP(BNX2X_MSG_SP, "Got SETUP_MAC completions\n");
5297 if (CNIC_LOADED(bp) && (cid == BNX2X_ISCSI_ETH_CID(bp)))
5298 vlan_mac_obj = &bp->iscsi_l2_mac_obj;
5300 vlan_mac_obj = &bp->sp_objs[cid].mac_obj;
5303 case BNX2X_FILTER_VLAN_PENDING:
5304 DP(BNX2X_MSG_SP, "Got SETUP_VLAN completions\n");
5305 vlan_mac_obj = &bp->sp_objs[cid].vlan_obj;
5307 case BNX2X_FILTER_MCAST_PENDING:
5308 DP(BNX2X_MSG_SP, "Got SETUP_MCAST completions\n");
5309 /* This is only relevant for 57710 where multicast MACs are
5310 * configured as unicast MACs using the same ramrod.
5312 bnx2x_handle_mcast_eqe(bp);
5315 BNX2X_ERR("Unsupported classification command: 0x%x\n", echo);
5319 rc = vlan_mac_obj->complete(bp, vlan_mac_obj, elem, &ramrod_flags);
5322 BNX2X_ERR("Failed to schedule new commands: %d\n", rc);
5324 DP(BNX2X_MSG_SP, "Scheduled next pending commands...\n");
5327 static void bnx2x_set_iscsi_eth_rx_mode(struct bnx2x *bp, bool start);
5329 static void bnx2x_handle_rx_mode_eqe(struct bnx2x *bp)
5331 netif_addr_lock_bh(bp->dev);
5333 clear_bit(BNX2X_FILTER_RX_MODE_PENDING, &bp->sp_state);
5335 /* Send rx_mode command again if was requested */
5336 if (test_and_clear_bit(BNX2X_FILTER_RX_MODE_SCHED, &bp->sp_state))
5337 bnx2x_set_storm_rx_mode(bp);
5338 else if (test_and_clear_bit(BNX2X_FILTER_ISCSI_ETH_START_SCHED,
5340 bnx2x_set_iscsi_eth_rx_mode(bp, true);
5341 else if (test_and_clear_bit(BNX2X_FILTER_ISCSI_ETH_STOP_SCHED,
5343 bnx2x_set_iscsi_eth_rx_mode(bp, false);
5345 netif_addr_unlock_bh(bp->dev);
5348 static void bnx2x_after_afex_vif_lists(struct bnx2x *bp,
5349 union event_ring_elem *elem)
5351 if (elem->message.data.vif_list_event.echo == VIF_LIST_RULE_GET) {
5353 "afex: ramrod completed VIF LIST_GET, addrs 0x%x\n",
5354 elem->message.data.vif_list_event.func_bit_map);
5355 bnx2x_fw_command(bp, DRV_MSG_CODE_AFEX_LISTGET_ACK,
5356 elem->message.data.vif_list_event.func_bit_map);
5357 } else if (elem->message.data.vif_list_event.echo ==
5358 VIF_LIST_RULE_SET) {
5359 DP(BNX2X_MSG_SP, "afex: ramrod completed VIF LIST_SET\n");
5360 bnx2x_fw_command(bp, DRV_MSG_CODE_AFEX_LISTSET_ACK, 0);
5364 /* called with rtnl_lock */
5365 static void bnx2x_after_function_update(struct bnx2x *bp)
5368 struct bnx2x_fastpath *fp;
5369 struct bnx2x_queue_state_params queue_params = {NULL};
5370 struct bnx2x_queue_update_params *q_update_params =
5371 &queue_params.params.update;
5373 /* Send Q update command with afex vlan removal values for all Qs */
5374 queue_params.cmd = BNX2X_Q_CMD_UPDATE;
5376 /* set silent vlan removal values according to vlan mode */
5377 __set_bit(BNX2X_Q_UPDATE_SILENT_VLAN_REM_CHNG,
5378 &q_update_params->update_flags);
5379 __set_bit(BNX2X_Q_UPDATE_SILENT_VLAN_REM,
5380 &q_update_params->update_flags);
5381 __set_bit(RAMROD_COMP_WAIT, &queue_params.ramrod_flags);
5383 /* in access mode mark mask and value are 0 to strip all vlans */
5384 if (bp->afex_vlan_mode == FUNC_MF_CFG_AFEX_VLAN_ACCESS_MODE) {
5385 q_update_params->silent_removal_value = 0;
5386 q_update_params->silent_removal_mask = 0;
5388 q_update_params->silent_removal_value =
5389 (bp->afex_def_vlan_tag & VLAN_VID_MASK);
5390 q_update_params->silent_removal_mask = VLAN_VID_MASK;
5393 for_each_eth_queue(bp, q) {
5394 /* Set the appropriate Queue object */
5396 queue_params.q_obj = &bnx2x_sp_obj(bp, fp).q_obj;
5398 /* send the ramrod */
5399 rc = bnx2x_queue_state_change(bp, &queue_params);
5401 BNX2X_ERR("Failed to config silent vlan rem for Q %d\n",
5405 if (!NO_FCOE(bp) && CNIC_ENABLED(bp)) {
5406 fp = &bp->fp[FCOE_IDX(bp)];
5407 queue_params.q_obj = &bnx2x_sp_obj(bp, fp).q_obj;
5409 /* clear pending completion bit */
5410 __clear_bit(RAMROD_COMP_WAIT, &queue_params.ramrod_flags);
5412 /* mark latest Q bit */
5413 smp_mb__before_atomic();
5414 set_bit(BNX2X_AFEX_FCOE_Q_UPDATE_PENDING, &bp->sp_state);
5415 smp_mb__after_atomic();
5417 /* send Q update ramrod for FCoE Q */
5418 rc = bnx2x_queue_state_change(bp, &queue_params);
5420 BNX2X_ERR("Failed to config silent vlan rem for Q %d\n",
5423 /* If no FCoE ring - ACK MCP now */
5424 bnx2x_link_report(bp);
5425 bnx2x_fw_command(bp, DRV_MSG_CODE_AFEX_VIFSET_ACK, 0);
5429 static struct bnx2x_queue_sp_obj *bnx2x_cid_to_q_obj(
5430 struct bnx2x *bp, u32 cid)
5432 DP(BNX2X_MSG_SP, "retrieving fp from cid %d\n", cid);
5434 if (CNIC_LOADED(bp) && (cid == BNX2X_FCOE_ETH_CID(bp)))
5435 return &bnx2x_fcoe_sp_obj(bp, q_obj);
5437 return &bp->sp_objs[CID_TO_FP(cid, bp)].q_obj;
5440 static void bnx2x_eq_int(struct bnx2x *bp)
5442 u16 hw_cons, sw_cons, sw_prod;
5443 union event_ring_elem *elem;
5447 int rc, spqe_cnt = 0;
5448 struct bnx2x_queue_sp_obj *q_obj;
5449 struct bnx2x_func_sp_obj *f_obj = &bp->func_obj;
5450 struct bnx2x_raw_obj *rss_raw = &bp->rss_conf_obj.raw;
5452 hw_cons = le16_to_cpu(*bp->eq_cons_sb);
5454 /* The hw_cos range is 1-255, 257 - the sw_cons range is 0-254, 256.
5455 * when we get the next-page we need to adjust so the loop
5456 * condition below will be met. The next element is the size of a
5457 * regular element and hence incrementing by 1
5459 if ((hw_cons & EQ_DESC_MAX_PAGE) == EQ_DESC_MAX_PAGE)
5462 /* This function may never run in parallel with itself for a
5463 * specific bp, thus there is no need in "paired" read memory
5466 sw_cons = bp->eq_cons;
5467 sw_prod = bp->eq_prod;
5469 DP(BNX2X_MSG_SP, "EQ: hw_cons %u sw_cons %u bp->eq_spq_left %x\n",
5470 hw_cons, sw_cons, atomic_read(&bp->eq_spq_left));
5472 for (; sw_cons != hw_cons;
5473 sw_prod = NEXT_EQ_IDX(sw_prod), sw_cons = NEXT_EQ_IDX(sw_cons)) {
5475 elem = &bp->eq_ring[EQ_DESC(sw_cons)];
5477 rc = bnx2x_iov_eq_sp_event(bp, elem);
5479 DP(BNX2X_MSG_IOV, "bnx2x_iov_eq_sp_event returned %d\n",
5484 opcode = elem->message.opcode;
5486 /* handle eq element */
5488 case EVENT_RING_OPCODE_VF_PF_CHANNEL:
5489 bnx2x_vf_mbx_schedule(bp,
5490 &elem->message.data.vf_pf_event);
5493 case EVENT_RING_OPCODE_STAT_QUERY:
5494 DP_AND((BNX2X_MSG_SP | BNX2X_MSG_STATS),
5495 "got statistics comp event %d\n",
5497 /* nothing to do with stats comp */
5500 case EVENT_RING_OPCODE_CFC_DEL:
5501 /* handle according to cid range */
5503 * we may want to verify here that the bp state is
5507 /* elem CID originates from FW; actually LE */
5508 cid = SW_CID(elem->message.data.cfc_del_event.cid);
5511 "got delete ramrod for MULTI[%d]\n", cid);
5513 if (CNIC_LOADED(bp) &&
5514 !bnx2x_cnic_handle_cfc_del(bp, cid, elem))
5517 q_obj = bnx2x_cid_to_q_obj(bp, cid);
5519 if (q_obj->complete_cmd(bp, q_obj, BNX2X_Q_CMD_CFC_DEL))
5524 case EVENT_RING_OPCODE_STOP_TRAFFIC:
5525 DP(BNX2X_MSG_SP | BNX2X_MSG_DCB, "got STOP TRAFFIC\n");
5526 bnx2x_dcbx_set_params(bp, BNX2X_DCBX_STATE_TX_PAUSED);
5527 if (f_obj->complete_cmd(bp, f_obj,
5528 BNX2X_F_CMD_TX_STOP))
5532 case EVENT_RING_OPCODE_START_TRAFFIC:
5533 DP(BNX2X_MSG_SP | BNX2X_MSG_DCB, "got START TRAFFIC\n");
5534 bnx2x_dcbx_set_params(bp, BNX2X_DCBX_STATE_TX_RELEASED);
5535 if (f_obj->complete_cmd(bp, f_obj,
5536 BNX2X_F_CMD_TX_START))
5540 case EVENT_RING_OPCODE_FUNCTION_UPDATE:
5541 echo = elem->message.data.function_update_event.echo;
5542 if (echo == SWITCH_UPDATE) {
5543 DP(BNX2X_MSG_SP | NETIF_MSG_IFUP,
5544 "got FUNC_SWITCH_UPDATE ramrod\n");
5545 if (f_obj->complete_cmd(
5546 bp, f_obj, BNX2X_F_CMD_SWITCH_UPDATE))
5550 int cmd = BNX2X_SP_RTNL_AFEX_F_UPDATE;
5552 DP(BNX2X_MSG_SP | BNX2X_MSG_MCP,
5553 "AFEX: ramrod completed FUNCTION_UPDATE\n");
5554 f_obj->complete_cmd(bp, f_obj,
5555 BNX2X_F_CMD_AFEX_UPDATE);
5557 /* We will perform the Queues update from
5558 * sp_rtnl task as all Queue SP operations
5559 * should run under rtnl_lock.
5561 bnx2x_schedule_sp_rtnl(bp, cmd, 0);
5566 case EVENT_RING_OPCODE_AFEX_VIF_LISTS:
5567 f_obj->complete_cmd(bp, f_obj,
5568 BNX2X_F_CMD_AFEX_VIFLISTS);
5569 bnx2x_after_afex_vif_lists(bp, elem);
5571 case EVENT_RING_OPCODE_FUNCTION_START:
5572 DP(BNX2X_MSG_SP | NETIF_MSG_IFUP,
5573 "got FUNC_START ramrod\n");
5574 if (f_obj->complete_cmd(bp, f_obj, BNX2X_F_CMD_START))
5579 case EVENT_RING_OPCODE_FUNCTION_STOP:
5580 DP(BNX2X_MSG_SP | NETIF_MSG_IFUP,
5581 "got FUNC_STOP ramrod\n");
5582 if (f_obj->complete_cmd(bp, f_obj, BNX2X_F_CMD_STOP))
5587 case EVENT_RING_OPCODE_SET_TIMESYNC:
5588 DP(BNX2X_MSG_SP | BNX2X_MSG_PTP,
5589 "got set_timesync ramrod completion\n");
5590 if (f_obj->complete_cmd(bp, f_obj,
5591 BNX2X_F_CMD_SET_TIMESYNC))
5596 switch (opcode | bp->state) {
5597 case (EVENT_RING_OPCODE_RSS_UPDATE_RULES |
5599 case (EVENT_RING_OPCODE_RSS_UPDATE_RULES |
5600 BNX2X_STATE_OPENING_WAIT4_PORT):
5601 case (EVENT_RING_OPCODE_RSS_UPDATE_RULES |
5602 BNX2X_STATE_CLOSING_WAIT4_HALT):
5603 DP(BNX2X_MSG_SP, "got RSS_UPDATE ramrod. CID %d\n",
5604 SW_CID(elem->message.data.eth_event.echo));
5605 rss_raw->clear_pending(rss_raw);
5608 case (EVENT_RING_OPCODE_SET_MAC | BNX2X_STATE_OPEN):
5609 case (EVENT_RING_OPCODE_SET_MAC | BNX2X_STATE_DIAG):
5610 case (EVENT_RING_OPCODE_SET_MAC |
5611 BNX2X_STATE_CLOSING_WAIT4_HALT):
5612 case (EVENT_RING_OPCODE_CLASSIFICATION_RULES |
5614 case (EVENT_RING_OPCODE_CLASSIFICATION_RULES |
5616 case (EVENT_RING_OPCODE_CLASSIFICATION_RULES |
5617 BNX2X_STATE_CLOSING_WAIT4_HALT):
5618 DP(BNX2X_MSG_SP, "got (un)set vlan/mac ramrod\n");
5619 bnx2x_handle_classification_eqe(bp, elem);
5622 case (EVENT_RING_OPCODE_MULTICAST_RULES |
5624 case (EVENT_RING_OPCODE_MULTICAST_RULES |
5626 case (EVENT_RING_OPCODE_MULTICAST_RULES |
5627 BNX2X_STATE_CLOSING_WAIT4_HALT):
5628 DP(BNX2X_MSG_SP, "got mcast ramrod\n");
5629 bnx2x_handle_mcast_eqe(bp);
5632 case (EVENT_RING_OPCODE_FILTERS_RULES |
5634 case (EVENT_RING_OPCODE_FILTERS_RULES |
5636 case (EVENT_RING_OPCODE_FILTERS_RULES |
5637 BNX2X_STATE_CLOSING_WAIT4_HALT):
5638 DP(BNX2X_MSG_SP, "got rx_mode ramrod\n");
5639 bnx2x_handle_rx_mode_eqe(bp);
5642 /* unknown event log error and continue */
5643 BNX2X_ERR("Unknown EQ event %d, bp->state 0x%x\n",
5644 elem->message.opcode, bp->state);
5650 smp_mb__before_atomic();
5651 atomic_add(spqe_cnt, &bp->eq_spq_left);
5653 bp->eq_cons = sw_cons;
5654 bp->eq_prod = sw_prod;
5655 /* Make sure that above mem writes were issued towards the memory */
5658 /* update producer */
5659 bnx2x_update_eq_prod(bp, bp->eq_prod);
5662 static void bnx2x_sp_task(struct work_struct *work)
5664 struct bnx2x *bp = container_of(work, struct bnx2x, sp_task.work);
5666 DP(BNX2X_MSG_SP, "sp task invoked\n");
5668 /* make sure the atomic interrupt_occurred has been written */
5670 if (atomic_read(&bp->interrupt_occurred)) {
5672 /* what work needs to be performed? */
5673 u16 status = bnx2x_update_dsb_idx(bp);
5675 DP(BNX2X_MSG_SP, "status %x\n", status);
5676 DP(BNX2X_MSG_SP, "setting interrupt_occurred to 0\n");
5677 atomic_set(&bp->interrupt_occurred, 0);
5680 if (status & BNX2X_DEF_SB_ATT_IDX) {
5682 status &= ~BNX2X_DEF_SB_ATT_IDX;
5685 /* SP events: STAT_QUERY and others */
5686 if (status & BNX2X_DEF_SB_IDX) {
5687 struct bnx2x_fastpath *fp = bnx2x_fcoe_fp(bp);
5689 if (FCOE_INIT(bp) &&
5690 (bnx2x_has_rx_work(fp) || bnx2x_has_tx_work(fp))) {
5691 /* Prevent local bottom-halves from running as
5692 * we are going to change the local NAPI list.
5695 napi_schedule(&bnx2x_fcoe(bp, napi));
5699 /* Handle EQ completions */
5701 bnx2x_ack_sb(bp, bp->igu_dsb_id, USTORM_ID,
5702 le16_to_cpu(bp->def_idx), IGU_INT_NOP, 1);
5704 status &= ~BNX2X_DEF_SB_IDX;
5707 /* if status is non zero then perhaps something went wrong */
5708 if (unlikely(status))
5710 "got an unknown interrupt! (status 0x%x)\n", status);
5712 /* ack status block only if something was actually handled */
5713 bnx2x_ack_sb(bp, bp->igu_dsb_id, ATTENTION_ID,
5714 le16_to_cpu(bp->def_att_idx), IGU_INT_ENABLE, 1);
5717 /* afex - poll to check if VIFSET_ACK should be sent to MFW */
5718 if (test_and_clear_bit(BNX2X_AFEX_PENDING_VIFSET_MCP_ACK,
5720 bnx2x_link_report(bp);
5721 bnx2x_fw_command(bp, DRV_MSG_CODE_AFEX_VIFSET_ACK, 0);
5725 irqreturn_t bnx2x_msix_sp_int(int irq, void *dev_instance)
5727 struct net_device *dev = dev_instance;
5728 struct bnx2x *bp = netdev_priv(dev);
5730 bnx2x_ack_sb(bp, bp->igu_dsb_id, USTORM_ID, 0,
5731 IGU_INT_DISABLE, 0);
5733 #ifdef BNX2X_STOP_ON_ERROR
5734 if (unlikely(bp->panic))
5738 if (CNIC_LOADED(bp)) {
5739 struct cnic_ops *c_ops;
5742 c_ops = rcu_dereference(bp->cnic_ops);
5744 c_ops->cnic_handler(bp->cnic_data, NULL);
5748 /* schedule sp task to perform default status block work, ack
5749 * attentions and enable interrupts.
5751 bnx2x_schedule_sp_task(bp);
5756 /* end of slow path */
5758 void bnx2x_drv_pulse(struct bnx2x *bp)
5760 SHMEM_WR(bp, func_mb[BP_FW_MB_IDX(bp)].drv_pulse_mb,
5761 bp->fw_drv_pulse_wr_seq);
5764 static void bnx2x_timer(struct timer_list *t)
5766 struct bnx2x *bp = from_timer(bp, t, timer);
5768 if (!netif_running(bp->dev))
5773 int mb_idx = BP_FW_MB_IDX(bp);
5777 ++bp->fw_drv_pulse_wr_seq;
5778 bp->fw_drv_pulse_wr_seq &= DRV_PULSE_SEQ_MASK;
5779 drv_pulse = bp->fw_drv_pulse_wr_seq;
5780 bnx2x_drv_pulse(bp);
5782 mcp_pulse = (SHMEM_RD(bp, func_mb[mb_idx].mcp_pulse_mb) &
5783 MCP_PULSE_SEQ_MASK);
5784 /* The delta between driver pulse and mcp response
5785 * should not get too big. If the MFW is more than 5 pulses
5786 * behind, we should worry about it enough to generate an error
5789 if (((drv_pulse - mcp_pulse) & MCP_PULSE_SEQ_MASK) > 5)
5790 BNX2X_ERR("MFW seems hanged: drv_pulse (0x%x) != mcp_pulse (0x%x)\n",
5791 drv_pulse, mcp_pulse);
5794 if (bp->state == BNX2X_STATE_OPEN)
5795 bnx2x_stats_handle(bp, STATS_EVENT_UPDATE);
5797 /* sample pf vf bulletin board for new posts from pf */
5799 bnx2x_timer_sriov(bp);
5801 mod_timer(&bp->timer, jiffies + bp->current_interval);
5804 /* end of Statistics */
5809 * nic init service functions
5812 static void bnx2x_fill(struct bnx2x *bp, u32 addr, int fill, u32 len)
5815 if (!(len%4) && !(addr%4))
5816 for (i = 0; i < len; i += 4)
5817 REG_WR(bp, addr + i, fill);
5819 for (i = 0; i < len; i++)
5820 REG_WR8(bp, addr + i, fill);
5823 /* helper: writes FP SP data to FW - data_size in dwords */
5824 static void bnx2x_wr_fp_sb_data(struct bnx2x *bp,
5830 for (index = 0; index < data_size; index++)
5831 REG_WR(bp, BAR_CSTRORM_INTMEM +
5832 CSTORM_STATUS_BLOCK_DATA_OFFSET(fw_sb_id) +
5834 *(sb_data_p + index));
5837 static void bnx2x_zero_fp_sb(struct bnx2x *bp, int fw_sb_id)
5841 struct hc_status_block_data_e2 sb_data_e2;
5842 struct hc_status_block_data_e1x sb_data_e1x;
5844 /* disable the function first */
5845 if (!CHIP_IS_E1x(bp)) {
5846 memset(&sb_data_e2, 0, sizeof(struct hc_status_block_data_e2));
5847 sb_data_e2.common.state = SB_DISABLED;
5848 sb_data_e2.common.p_func.vf_valid = false;
5849 sb_data_p = (u32 *)&sb_data_e2;
5850 data_size = sizeof(struct hc_status_block_data_e2)/sizeof(u32);
5852 memset(&sb_data_e1x, 0,
5853 sizeof(struct hc_status_block_data_e1x));
5854 sb_data_e1x.common.state = SB_DISABLED;
5855 sb_data_e1x.common.p_func.vf_valid = false;
5856 sb_data_p = (u32 *)&sb_data_e1x;
5857 data_size = sizeof(struct hc_status_block_data_e1x)/sizeof(u32);
5859 bnx2x_wr_fp_sb_data(bp, fw_sb_id, sb_data_p, data_size);
5861 bnx2x_fill(bp, BAR_CSTRORM_INTMEM +
5862 CSTORM_STATUS_BLOCK_OFFSET(fw_sb_id), 0,
5863 CSTORM_STATUS_BLOCK_SIZE);
5864 bnx2x_fill(bp, BAR_CSTRORM_INTMEM +
5865 CSTORM_SYNC_BLOCK_OFFSET(fw_sb_id), 0,
5866 CSTORM_SYNC_BLOCK_SIZE);
5869 /* helper: writes SP SB data to FW */
5870 static void bnx2x_wr_sp_sb_data(struct bnx2x *bp,
5871 struct hc_sp_status_block_data *sp_sb_data)
5873 int func = BP_FUNC(bp);
5875 for (i = 0; i < sizeof(struct hc_sp_status_block_data)/sizeof(u32); i++)
5876 REG_WR(bp, BAR_CSTRORM_INTMEM +
5877 CSTORM_SP_STATUS_BLOCK_DATA_OFFSET(func) +
5879 *((u32 *)sp_sb_data + i));
5882 static void bnx2x_zero_sp_sb(struct bnx2x *bp)
5884 int func = BP_FUNC(bp);
5885 struct hc_sp_status_block_data sp_sb_data;
5886 memset(&sp_sb_data, 0, sizeof(struct hc_sp_status_block_data));
5888 sp_sb_data.state = SB_DISABLED;
5889 sp_sb_data.p_func.vf_valid = false;
5891 bnx2x_wr_sp_sb_data(bp, &sp_sb_data);
5893 bnx2x_fill(bp, BAR_CSTRORM_INTMEM +
5894 CSTORM_SP_STATUS_BLOCK_OFFSET(func), 0,
5895 CSTORM_SP_STATUS_BLOCK_SIZE);
5896 bnx2x_fill(bp, BAR_CSTRORM_INTMEM +
5897 CSTORM_SP_SYNC_BLOCK_OFFSET(func), 0,
5898 CSTORM_SP_SYNC_BLOCK_SIZE);
5901 static void bnx2x_setup_ndsb_state_machine(struct hc_status_block_sm *hc_sm,
5902 int igu_sb_id, int igu_seg_id)
5904 hc_sm->igu_sb_id = igu_sb_id;
5905 hc_sm->igu_seg_id = igu_seg_id;
5906 hc_sm->timer_value = 0xFF;
5907 hc_sm->time_to_expire = 0xFFFFFFFF;
5910 /* allocates state machine ids. */
5911 static void bnx2x_map_sb_state_machines(struct hc_index_data *index_data)
5913 /* zero out state machine indices */
5915 index_data[HC_INDEX_ETH_RX_CQ_CONS].flags &= ~HC_INDEX_DATA_SM_ID;
5918 index_data[HC_INDEX_OOO_TX_CQ_CONS].flags &= ~HC_INDEX_DATA_SM_ID;
5919 index_data[HC_INDEX_ETH_TX_CQ_CONS_COS0].flags &= ~HC_INDEX_DATA_SM_ID;
5920 index_data[HC_INDEX_ETH_TX_CQ_CONS_COS1].flags &= ~HC_INDEX_DATA_SM_ID;
5921 index_data[HC_INDEX_ETH_TX_CQ_CONS_COS2].flags &= ~HC_INDEX_DATA_SM_ID;
5925 index_data[HC_INDEX_ETH_RX_CQ_CONS].flags |=
5926 SM_RX_ID << HC_INDEX_DATA_SM_ID_SHIFT;
5929 index_data[HC_INDEX_OOO_TX_CQ_CONS].flags |=
5930 SM_TX_ID << HC_INDEX_DATA_SM_ID_SHIFT;
5931 index_data[HC_INDEX_ETH_TX_CQ_CONS_COS0].flags |=
5932 SM_TX_ID << HC_INDEX_DATA_SM_ID_SHIFT;
5933 index_data[HC_INDEX_ETH_TX_CQ_CONS_COS1].flags |=
5934 SM_TX_ID << HC_INDEX_DATA_SM_ID_SHIFT;
5935 index_data[HC_INDEX_ETH_TX_CQ_CONS_COS2].flags |=
5936 SM_TX_ID << HC_INDEX_DATA_SM_ID_SHIFT;
5939 void bnx2x_init_sb(struct bnx2x *bp, dma_addr_t mapping, int vfid,
5940 u8 vf_valid, int fw_sb_id, int igu_sb_id)
5944 struct hc_status_block_data_e2 sb_data_e2;
5945 struct hc_status_block_data_e1x sb_data_e1x;
5946 struct hc_status_block_sm *hc_sm_p;
5950 if (CHIP_INT_MODE_IS_BC(bp))
5951 igu_seg_id = HC_SEG_ACCESS_NORM;
5953 igu_seg_id = IGU_SEG_ACCESS_NORM;
5955 bnx2x_zero_fp_sb(bp, fw_sb_id);
5957 if (!CHIP_IS_E1x(bp)) {
5958 memset(&sb_data_e2, 0, sizeof(struct hc_status_block_data_e2));
5959 sb_data_e2.common.state = SB_ENABLED;
5960 sb_data_e2.common.p_func.pf_id = BP_FUNC(bp);
5961 sb_data_e2.common.p_func.vf_id = vfid;
5962 sb_data_e2.common.p_func.vf_valid = vf_valid;
5963 sb_data_e2.common.p_func.vnic_id = BP_VN(bp);
5964 sb_data_e2.common.same_igu_sb_1b = true;
5965 sb_data_e2.common.host_sb_addr.hi = U64_HI(mapping);
5966 sb_data_e2.common.host_sb_addr.lo = U64_LO(mapping);
5967 hc_sm_p = sb_data_e2.common.state_machine;
5968 sb_data_p = (u32 *)&sb_data_e2;
5969 data_size = sizeof(struct hc_status_block_data_e2)/sizeof(u32);
5970 bnx2x_map_sb_state_machines(sb_data_e2.index_data);
5972 memset(&sb_data_e1x, 0,
5973 sizeof(struct hc_status_block_data_e1x));
5974 sb_data_e1x.common.state = SB_ENABLED;
5975 sb_data_e1x.common.p_func.pf_id = BP_FUNC(bp);
5976 sb_data_e1x.common.p_func.vf_id = 0xff;
5977 sb_data_e1x.common.p_func.vf_valid = false;
5978 sb_data_e1x.common.p_func.vnic_id = BP_VN(bp);
5979 sb_data_e1x.common.same_igu_sb_1b = true;
5980 sb_data_e1x.common.host_sb_addr.hi = U64_HI(mapping);
5981 sb_data_e1x.common.host_sb_addr.lo = U64_LO(mapping);
5982 hc_sm_p = sb_data_e1x.common.state_machine;
5983 sb_data_p = (u32 *)&sb_data_e1x;
5984 data_size = sizeof(struct hc_status_block_data_e1x)/sizeof(u32);
5985 bnx2x_map_sb_state_machines(sb_data_e1x.index_data);
5988 bnx2x_setup_ndsb_state_machine(&hc_sm_p[SM_RX_ID],
5989 igu_sb_id, igu_seg_id);
5990 bnx2x_setup_ndsb_state_machine(&hc_sm_p[SM_TX_ID],
5991 igu_sb_id, igu_seg_id);
5993 DP(NETIF_MSG_IFUP, "Init FW SB %d\n", fw_sb_id);
5995 /* write indices to HW - PCI guarantees endianity of regpairs */
5996 bnx2x_wr_fp_sb_data(bp, fw_sb_id, sb_data_p, data_size);
5999 static void bnx2x_update_coalesce_sb(struct bnx2x *bp, u8 fw_sb_id,
6000 u16 tx_usec, u16 rx_usec)
6002 bnx2x_update_coalesce_sb_index(bp, fw_sb_id, HC_INDEX_ETH_RX_CQ_CONS,
6004 bnx2x_update_coalesce_sb_index(bp, fw_sb_id,
6005 HC_INDEX_ETH_TX_CQ_CONS_COS0, false,
6007 bnx2x_update_coalesce_sb_index(bp, fw_sb_id,
6008 HC_INDEX_ETH_TX_CQ_CONS_COS1, false,
6010 bnx2x_update_coalesce_sb_index(bp, fw_sb_id,
6011 HC_INDEX_ETH_TX_CQ_CONS_COS2, false,
6015 static void bnx2x_init_def_sb(struct bnx2x *bp)
6017 struct host_sp_status_block *def_sb = bp->def_status_blk;
6018 dma_addr_t mapping = bp->def_status_blk_mapping;
6019 int igu_sp_sb_index;
6021 int port = BP_PORT(bp);
6022 int func = BP_FUNC(bp);
6023 int reg_offset, reg_offset_en5;
6026 struct hc_sp_status_block_data sp_sb_data;
6027 memset(&sp_sb_data, 0, sizeof(struct hc_sp_status_block_data));
6029 if (CHIP_INT_MODE_IS_BC(bp)) {
6030 igu_sp_sb_index = DEF_SB_IGU_ID;
6031 igu_seg_id = HC_SEG_ACCESS_DEF;
6033 igu_sp_sb_index = bp->igu_dsb_id;
6034 igu_seg_id = IGU_SEG_ACCESS_DEF;
6038 section = ((u64)mapping) + offsetof(struct host_sp_status_block,
6039 atten_status_block);
6040 def_sb->atten_status_block.status_block_id = igu_sp_sb_index;
6044 reg_offset = (port ? MISC_REG_AEU_ENABLE1_FUNC_1_OUT_0 :
6045 MISC_REG_AEU_ENABLE1_FUNC_0_OUT_0);
6046 reg_offset_en5 = (port ? MISC_REG_AEU_ENABLE5_FUNC_1_OUT_0 :
6047 MISC_REG_AEU_ENABLE5_FUNC_0_OUT_0);
6048 for (index = 0; index < MAX_DYNAMIC_ATTN_GRPS; index++) {
6050 /* take care of sig[0]..sig[4] */
6051 for (sindex = 0; sindex < 4; sindex++)
6052 bp->attn_group[index].sig[sindex] =
6053 REG_RD(bp, reg_offset + sindex*0x4 + 0x10*index);
6055 if (!CHIP_IS_E1x(bp))
6057 * enable5 is separate from the rest of the registers,
6058 * and therefore the address skip is 4
6059 * and not 16 between the different groups
6061 bp->attn_group[index].sig[4] = REG_RD(bp,
6062 reg_offset_en5 + 0x4*index);
6064 bp->attn_group[index].sig[4] = 0;
6067 if (bp->common.int_block == INT_BLOCK_HC) {
6068 reg_offset = (port ? HC_REG_ATTN_MSG1_ADDR_L :
6069 HC_REG_ATTN_MSG0_ADDR_L);
6071 REG_WR(bp, reg_offset, U64_LO(section));
6072 REG_WR(bp, reg_offset + 4, U64_HI(section));
6073 } else if (!CHIP_IS_E1x(bp)) {
6074 REG_WR(bp, IGU_REG_ATTN_MSG_ADDR_L, U64_LO(section));
6075 REG_WR(bp, IGU_REG_ATTN_MSG_ADDR_H, U64_HI(section));
6078 section = ((u64)mapping) + offsetof(struct host_sp_status_block,
6081 bnx2x_zero_sp_sb(bp);
6083 /* PCI guarantees endianity of regpairs */
6084 sp_sb_data.state = SB_ENABLED;
6085 sp_sb_data.host_sb_addr.lo = U64_LO(section);
6086 sp_sb_data.host_sb_addr.hi = U64_HI(section);
6087 sp_sb_data.igu_sb_id = igu_sp_sb_index;
6088 sp_sb_data.igu_seg_id = igu_seg_id;
6089 sp_sb_data.p_func.pf_id = func;
6090 sp_sb_data.p_func.vnic_id = BP_VN(bp);
6091 sp_sb_data.p_func.vf_id = 0xff;
6093 bnx2x_wr_sp_sb_data(bp, &sp_sb_data);
6095 bnx2x_ack_sb(bp, bp->igu_dsb_id, USTORM_ID, 0, IGU_INT_ENABLE, 0);
6098 void bnx2x_update_coalesce(struct bnx2x *bp)
6102 for_each_eth_queue(bp, i)
6103 bnx2x_update_coalesce_sb(bp, bp->fp[i].fw_sb_id,
6104 bp->tx_ticks, bp->rx_ticks);
6107 static void bnx2x_init_sp_ring(struct bnx2x *bp)
6109 spin_lock_init(&bp->spq_lock);
6110 atomic_set(&bp->cq_spq_left, MAX_SPQ_PENDING);
6112 bp->spq_prod_idx = 0;
6113 bp->dsb_sp_prod = BNX2X_SP_DSB_INDEX;
6114 bp->spq_prod_bd = bp->spq;
6115 bp->spq_last_bd = bp->spq_prod_bd + MAX_SP_DESC_CNT;
6118 static void bnx2x_init_eq_ring(struct bnx2x *bp)
6121 for (i = 1; i <= NUM_EQ_PAGES; i++) {
6122 union event_ring_elem *elem =
6123 &bp->eq_ring[EQ_DESC_CNT_PAGE * i - 1];
6125 elem->next_page.addr.hi =
6126 cpu_to_le32(U64_HI(bp->eq_mapping +
6127 BCM_PAGE_SIZE * (i % NUM_EQ_PAGES)));
6128 elem->next_page.addr.lo =
6129 cpu_to_le32(U64_LO(bp->eq_mapping +
6130 BCM_PAGE_SIZE*(i % NUM_EQ_PAGES)));
6133 bp->eq_prod = NUM_EQ_DESC;
6134 bp->eq_cons_sb = BNX2X_EQ_INDEX;
6135 /* we want a warning message before it gets wrought... */
6136 atomic_set(&bp->eq_spq_left,
6137 min_t(int, MAX_SP_DESC_CNT - MAX_SPQ_PENDING, NUM_EQ_DESC) - 1);
6140 /* called with netif_addr_lock_bh() */
6141 static int bnx2x_set_q_rx_mode(struct bnx2x *bp, u8 cl_id,
6142 unsigned long rx_mode_flags,
6143 unsigned long rx_accept_flags,
6144 unsigned long tx_accept_flags,
6145 unsigned long ramrod_flags)
6147 struct bnx2x_rx_mode_ramrod_params ramrod_param;
6150 memset(&ramrod_param, 0, sizeof(ramrod_param));
6152 /* Prepare ramrod parameters */
6153 ramrod_param.cid = 0;
6154 ramrod_param.cl_id = cl_id;
6155 ramrod_param.rx_mode_obj = &bp->rx_mode_obj;
6156 ramrod_param.func_id = BP_FUNC(bp);
6158 ramrod_param.pstate = &bp->sp_state;
6159 ramrod_param.state = BNX2X_FILTER_RX_MODE_PENDING;
6161 ramrod_param.rdata = bnx2x_sp(bp, rx_mode_rdata);
6162 ramrod_param.rdata_mapping = bnx2x_sp_mapping(bp, rx_mode_rdata);
6164 set_bit(BNX2X_FILTER_RX_MODE_PENDING, &bp->sp_state);
6166 ramrod_param.ramrod_flags = ramrod_flags;
6167 ramrod_param.rx_mode_flags = rx_mode_flags;
6169 ramrod_param.rx_accept_flags = rx_accept_flags;
6170 ramrod_param.tx_accept_flags = tx_accept_flags;
6172 rc = bnx2x_config_rx_mode(bp, &ramrod_param);
6174 BNX2X_ERR("Set rx_mode %d failed\n", bp->rx_mode);
6181 static int bnx2x_fill_accept_flags(struct bnx2x *bp, u32 rx_mode,
6182 unsigned long *rx_accept_flags,
6183 unsigned long *tx_accept_flags)
6185 /* Clear the flags first */
6186 *rx_accept_flags = 0;
6187 *tx_accept_flags = 0;
6190 case BNX2X_RX_MODE_NONE:
6192 * 'drop all' supersedes any accept flags that may have been
6193 * passed to the function.
6196 case BNX2X_RX_MODE_NORMAL:
6197 __set_bit(BNX2X_ACCEPT_UNICAST, rx_accept_flags);
6198 __set_bit(BNX2X_ACCEPT_MULTICAST, rx_accept_flags);
6199 __set_bit(BNX2X_ACCEPT_BROADCAST, rx_accept_flags);
6201 /* internal switching mode */
6202 __set_bit(BNX2X_ACCEPT_UNICAST, tx_accept_flags);
6203 __set_bit(BNX2X_ACCEPT_MULTICAST, tx_accept_flags);
6204 __set_bit(BNX2X_ACCEPT_BROADCAST, tx_accept_flags);
6206 if (bp->accept_any_vlan) {
6207 __set_bit(BNX2X_ACCEPT_ANY_VLAN, rx_accept_flags);
6208 __set_bit(BNX2X_ACCEPT_ANY_VLAN, tx_accept_flags);
6212 case BNX2X_RX_MODE_ALLMULTI:
6213 __set_bit(BNX2X_ACCEPT_UNICAST, rx_accept_flags);
6214 __set_bit(BNX2X_ACCEPT_ALL_MULTICAST, rx_accept_flags);
6215 __set_bit(BNX2X_ACCEPT_BROADCAST, rx_accept_flags);
6217 /* internal switching mode */
6218 __set_bit(BNX2X_ACCEPT_UNICAST, tx_accept_flags);
6219 __set_bit(BNX2X_ACCEPT_ALL_MULTICAST, tx_accept_flags);
6220 __set_bit(BNX2X_ACCEPT_BROADCAST, tx_accept_flags);
6222 if (bp->accept_any_vlan) {
6223 __set_bit(BNX2X_ACCEPT_ANY_VLAN, rx_accept_flags);
6224 __set_bit(BNX2X_ACCEPT_ANY_VLAN, tx_accept_flags);
6228 case BNX2X_RX_MODE_PROMISC:
6229 /* According to definition of SI mode, iface in promisc mode
6230 * should receive matched and unmatched (in resolution of port)
6233 __set_bit(BNX2X_ACCEPT_UNMATCHED, rx_accept_flags);
6234 __set_bit(BNX2X_ACCEPT_UNICAST, rx_accept_flags);
6235 __set_bit(BNX2X_ACCEPT_ALL_MULTICAST, rx_accept_flags);
6236 __set_bit(BNX2X_ACCEPT_BROADCAST, rx_accept_flags);
6238 /* internal switching mode */
6239 __set_bit(BNX2X_ACCEPT_ALL_MULTICAST, tx_accept_flags);
6240 __set_bit(BNX2X_ACCEPT_BROADCAST, tx_accept_flags);
6243 __set_bit(BNX2X_ACCEPT_ALL_UNICAST, tx_accept_flags);
6245 __set_bit(BNX2X_ACCEPT_UNICAST, tx_accept_flags);
6247 __set_bit(BNX2X_ACCEPT_ANY_VLAN, rx_accept_flags);
6248 __set_bit(BNX2X_ACCEPT_ANY_VLAN, tx_accept_flags);
6252 BNX2X_ERR("Unknown rx_mode: %d\n", rx_mode);
6259 /* called with netif_addr_lock_bh() */
6260 static int bnx2x_set_storm_rx_mode(struct bnx2x *bp)
6262 unsigned long rx_mode_flags = 0, ramrod_flags = 0;
6263 unsigned long rx_accept_flags = 0, tx_accept_flags = 0;
6267 /* Configure rx_mode of FCoE Queue */
6268 __set_bit(BNX2X_RX_MODE_FCOE_ETH, &rx_mode_flags);
6270 rc = bnx2x_fill_accept_flags(bp, bp->rx_mode, &rx_accept_flags,
6275 __set_bit(RAMROD_RX, &ramrod_flags);
6276 __set_bit(RAMROD_TX, &ramrod_flags);
6278 return bnx2x_set_q_rx_mode(bp, bp->fp->cl_id, rx_mode_flags,
6279 rx_accept_flags, tx_accept_flags,
6283 static void bnx2x_init_internal_common(struct bnx2x *bp)
6287 /* Zero this manually as its initialization is
6288 currently missing in the initTool */
6289 for (i = 0; i < (USTORM_AGG_DATA_SIZE >> 2); i++)
6290 REG_WR(bp, BAR_USTRORM_INTMEM +
6291 USTORM_AGG_DATA_OFFSET + i * 4, 0);
6292 if (!CHIP_IS_E1x(bp)) {
6293 REG_WR8(bp, BAR_CSTRORM_INTMEM + CSTORM_IGU_MODE_OFFSET,
6294 CHIP_INT_MODE_IS_BC(bp) ?
6295 HC_IGU_BC_MODE : HC_IGU_NBC_MODE);
6299 static void bnx2x_init_internal(struct bnx2x *bp, u32 load_code)
6301 switch (load_code) {
6302 case FW_MSG_CODE_DRV_LOAD_COMMON:
6303 case FW_MSG_CODE_DRV_LOAD_COMMON_CHIP:
6304 bnx2x_init_internal_common(bp);
6307 case FW_MSG_CODE_DRV_LOAD_PORT:
6311 case FW_MSG_CODE_DRV_LOAD_FUNCTION:
6312 /* internal memory per function is
6313 initialized inside bnx2x_pf_init */
6317 BNX2X_ERR("Unknown load_code (0x%x) from MCP\n", load_code);
6322 static inline u8 bnx2x_fp_igu_sb_id(struct bnx2x_fastpath *fp)
6324 return fp->bp->igu_base_sb + fp->index + CNIC_SUPPORT(fp->bp);
6327 static inline u8 bnx2x_fp_fw_sb_id(struct bnx2x_fastpath *fp)
6329 return fp->bp->base_fw_ndsb + fp->index + CNIC_SUPPORT(fp->bp);
6332 static u8 bnx2x_fp_cl_id(struct bnx2x_fastpath *fp)
6334 if (CHIP_IS_E1x(fp->bp))
6335 return BP_L_ID(fp->bp) + fp->index;
6336 else /* We want Client ID to be the same as IGU SB ID for 57712 */
6337 return bnx2x_fp_igu_sb_id(fp);
6340 static void bnx2x_init_eth_fp(struct bnx2x *bp, int fp_idx)
6342 struct bnx2x_fastpath *fp = &bp->fp[fp_idx];
6344 unsigned long q_type = 0;
6345 u32 cids[BNX2X_MULTI_TX_COS] = { 0 };
6346 fp->rx_queue = fp_idx;
6348 fp->cl_id = bnx2x_fp_cl_id(fp);
6349 fp->fw_sb_id = bnx2x_fp_fw_sb_id(fp);
6350 fp->igu_sb_id = bnx2x_fp_igu_sb_id(fp);
6351 /* qZone id equals to FW (per path) client id */
6352 fp->cl_qzone_id = bnx2x_fp_qzone_id(fp);
6355 fp->ustorm_rx_prods_offset = bnx2x_rx_ustorm_prods_offset(fp);
6357 /* Setup SB indices */
6358 fp->rx_cons_sb = BNX2X_RX_SB_INDEX;
6360 /* Configure Queue State object */
6361 __set_bit(BNX2X_Q_TYPE_HAS_RX, &q_type);
6362 __set_bit(BNX2X_Q_TYPE_HAS_TX, &q_type);
6364 BUG_ON(fp->max_cos > BNX2X_MULTI_TX_COS);
6367 for_each_cos_in_tx_queue(fp, cos) {
6368 bnx2x_init_txdata(bp, fp->txdata_ptr[cos],
6369 CID_COS_TO_TX_ONLY_CID(fp->cid, cos, bp),
6370 FP_COS_TO_TXQ(fp, cos, bp),
6371 BNX2X_TX_SB_INDEX_BASE + cos, fp);
6372 cids[cos] = fp->txdata_ptr[cos]->cid;
6375 /* nothing more for vf to do here */
6379 bnx2x_init_sb(bp, fp->status_blk_mapping, BNX2X_VF_ID_INVALID, false,
6380 fp->fw_sb_id, fp->igu_sb_id);
6381 bnx2x_update_fpsb_idx(fp);
6382 bnx2x_init_queue_obj(bp, &bnx2x_sp_obj(bp, fp).q_obj, fp->cl_id, cids,
6383 fp->max_cos, BP_FUNC(bp), bnx2x_sp(bp, q_rdata),
6384 bnx2x_sp_mapping(bp, q_rdata), q_type);
6387 * Configure classification DBs: Always enable Tx switching
6389 bnx2x_init_vlan_mac_fp_objs(fp, BNX2X_OBJ_TYPE_RX_TX);
6392 "queue[%d]: bnx2x_init_sb(%p,%p) cl_id %d fw_sb %d igu_sb %d\n",
6393 fp_idx, bp, fp->status_blk.e2_sb, fp->cl_id, fp->fw_sb_id,
6397 static void bnx2x_init_tx_ring_one(struct bnx2x_fp_txdata *txdata)
6401 for (i = 1; i <= NUM_TX_RINGS; i++) {
6402 struct eth_tx_next_bd *tx_next_bd =
6403 &txdata->tx_desc_ring[TX_DESC_CNT * i - 1].next_bd;
6405 tx_next_bd->addr_hi =
6406 cpu_to_le32(U64_HI(txdata->tx_desc_mapping +
6407 BCM_PAGE_SIZE*(i % NUM_TX_RINGS)));
6408 tx_next_bd->addr_lo =
6409 cpu_to_le32(U64_LO(txdata->tx_desc_mapping +
6410 BCM_PAGE_SIZE*(i % NUM_TX_RINGS)));
6413 *txdata->tx_cons_sb = cpu_to_le16(0);
6415 SET_FLAG(txdata->tx_db.data.header.header, DOORBELL_HDR_DB_TYPE, 1);
6416 txdata->tx_db.data.zero_fill1 = 0;
6417 txdata->tx_db.data.prod = 0;
6419 txdata->tx_pkt_prod = 0;
6420 txdata->tx_pkt_cons = 0;
6421 txdata->tx_bd_prod = 0;
6422 txdata->tx_bd_cons = 0;
6426 static void bnx2x_init_tx_rings_cnic(struct bnx2x *bp)
6430 for_each_tx_queue_cnic(bp, i)
6431 bnx2x_init_tx_ring_one(bp->fp[i].txdata_ptr[0]);
6434 static void bnx2x_init_tx_rings(struct bnx2x *bp)
6439 for_each_eth_queue(bp, i)
6440 for_each_cos_in_tx_queue(&bp->fp[i], cos)
6441 bnx2x_init_tx_ring_one(bp->fp[i].txdata_ptr[cos]);
6444 static void bnx2x_init_fcoe_fp(struct bnx2x *bp)
6446 struct bnx2x_fastpath *fp = bnx2x_fcoe_fp(bp);
6447 unsigned long q_type = 0;
6449 bnx2x_fcoe(bp, rx_queue) = BNX2X_NUM_ETH_QUEUES(bp);
6450 bnx2x_fcoe(bp, cl_id) = bnx2x_cnic_eth_cl_id(bp,
6451 BNX2X_FCOE_ETH_CL_ID_IDX);
6452 bnx2x_fcoe(bp, cid) = BNX2X_FCOE_ETH_CID(bp);
6453 bnx2x_fcoe(bp, fw_sb_id) = DEF_SB_ID;
6454 bnx2x_fcoe(bp, igu_sb_id) = bp->igu_dsb_id;
6455 bnx2x_fcoe(bp, rx_cons_sb) = BNX2X_FCOE_L2_RX_INDEX;
6456 bnx2x_init_txdata(bp, bnx2x_fcoe(bp, txdata_ptr[0]),
6457 fp->cid, FCOE_TXQ_IDX(bp), BNX2X_FCOE_L2_TX_INDEX,
6460 DP(NETIF_MSG_IFUP, "created fcoe tx data (fp index %d)\n", fp->index);
6462 /* qZone id equals to FW (per path) client id */
6463 bnx2x_fcoe(bp, cl_qzone_id) = bnx2x_fp_qzone_id(fp);
6465 bnx2x_fcoe(bp, ustorm_rx_prods_offset) =
6466 bnx2x_rx_ustorm_prods_offset(fp);
6468 /* Configure Queue State object */
6469 __set_bit(BNX2X_Q_TYPE_HAS_RX, &q_type);
6470 __set_bit(BNX2X_Q_TYPE_HAS_TX, &q_type);
6472 /* No multi-CoS for FCoE L2 client */
6473 BUG_ON(fp->max_cos != 1);
6475 bnx2x_init_queue_obj(bp, &bnx2x_sp_obj(bp, fp).q_obj, fp->cl_id,
6476 &fp->cid, 1, BP_FUNC(bp), bnx2x_sp(bp, q_rdata),
6477 bnx2x_sp_mapping(bp, q_rdata), q_type);
6480 "queue[%d]: bnx2x_init_sb(%p,%p) cl_id %d fw_sb %d igu_sb %d\n",
6481 fp->index, bp, fp->status_blk.e2_sb, fp->cl_id, fp->fw_sb_id,
6485 void bnx2x_nic_init_cnic(struct bnx2x *bp)
6488 bnx2x_init_fcoe_fp(bp);
6490 bnx2x_init_sb(bp, bp->cnic_sb_mapping,
6491 BNX2X_VF_ID_INVALID, false,
6492 bnx2x_cnic_fw_sb_id(bp), bnx2x_cnic_igu_sb_id(bp));
6494 /* ensure status block indices were read */
6496 bnx2x_init_rx_rings_cnic(bp);
6497 bnx2x_init_tx_rings_cnic(bp);
6503 void bnx2x_pre_irq_nic_init(struct bnx2x *bp)
6507 /* Setup NIC internals and enable interrupts */
6508 for_each_eth_queue(bp, i)
6509 bnx2x_init_eth_fp(bp, i);
6511 /* ensure status block indices were read */
6513 bnx2x_init_rx_rings(bp);
6514 bnx2x_init_tx_rings(bp);
6517 /* Initialize MOD_ABS interrupts */
6518 bnx2x_init_mod_abs_int(bp, &bp->link_vars, bp->common.chip_id,
6519 bp->common.shmem_base,
6520 bp->common.shmem2_base, BP_PORT(bp));
6522 /* initialize the default status block and sp ring */
6523 bnx2x_init_def_sb(bp);
6524 bnx2x_update_dsb_idx(bp);
6525 bnx2x_init_sp_ring(bp);
6527 bnx2x_memset_stats(bp);
6531 void bnx2x_post_irq_nic_init(struct bnx2x *bp, u32 load_code)
6533 bnx2x_init_eq_ring(bp);
6534 bnx2x_init_internal(bp, load_code);
6536 bnx2x_stats_init(bp);
6538 /* flush all before enabling interrupts */
6541 bnx2x_int_enable(bp);
6543 /* Check for SPIO5 */
6544 bnx2x_attn_int_deasserted0(bp,
6545 REG_RD(bp, MISC_REG_AEU_AFTER_INVERT_1_FUNC_0 + BP_PORT(bp)*4) &
6546 AEU_INPUTS_ATTN_BITS_SPIO5);
6549 /* gzip service functions */
6550 static int bnx2x_gunzip_init(struct bnx2x *bp)
6552 bp->gunzip_buf = dma_alloc_coherent(&bp->pdev->dev, FW_BUF_SIZE,
6553 &bp->gunzip_mapping, GFP_KERNEL);
6554 if (bp->gunzip_buf == NULL)
6557 bp->strm = kmalloc(sizeof(*bp->strm), GFP_KERNEL);
6558 if (bp->strm == NULL)
6561 bp->strm->workspace = vmalloc(zlib_inflate_workspacesize());
6562 if (bp->strm->workspace == NULL)
6572 dma_free_coherent(&bp->pdev->dev, FW_BUF_SIZE, bp->gunzip_buf,
6573 bp->gunzip_mapping);
6574 bp->gunzip_buf = NULL;
6577 BNX2X_ERR("Cannot allocate firmware buffer for un-compression\n");
6581 static void bnx2x_gunzip_end(struct bnx2x *bp)
6584 vfree(bp->strm->workspace);
6589 if (bp->gunzip_buf) {
6590 dma_free_coherent(&bp->pdev->dev, FW_BUF_SIZE, bp->gunzip_buf,
6591 bp->gunzip_mapping);
6592 bp->gunzip_buf = NULL;
6596 static int bnx2x_gunzip(struct bnx2x *bp, const u8 *zbuf, int len)
6600 /* check gzip header */
6601 if ((zbuf[0] != 0x1f) || (zbuf[1] != 0x8b) || (zbuf[2] != Z_DEFLATED)) {
6602 BNX2X_ERR("Bad gzip header\n");
6610 if (zbuf[3] & FNAME)
6611 while ((zbuf[n++] != 0) && (n < len));
6613 bp->strm->next_in = (typeof(bp->strm->next_in))zbuf + n;
6614 bp->strm->avail_in = len - n;
6615 bp->strm->next_out = bp->gunzip_buf;
6616 bp->strm->avail_out = FW_BUF_SIZE;
6618 rc = zlib_inflateInit2(bp->strm, -MAX_WBITS);
6622 rc = zlib_inflate(bp->strm, Z_FINISH);
6623 if ((rc != Z_OK) && (rc != Z_STREAM_END))
6624 netdev_err(bp->dev, "Firmware decompression error: %s\n",
6627 bp->gunzip_outlen = (FW_BUF_SIZE - bp->strm->avail_out);
6628 if (bp->gunzip_outlen & 0x3)
6630 "Firmware decompression error: gunzip_outlen (%d) not aligned\n",
6632 bp->gunzip_outlen >>= 2;
6634 zlib_inflateEnd(bp->strm);
6636 if (rc == Z_STREAM_END)
6642 /* nic load/unload */
6645 * General service functions
6648 /* send a NIG loopback debug packet */
6649 static void bnx2x_lb_pckt(struct bnx2x *bp)
6653 /* Ethernet source and destination addresses */
6654 wb_write[0] = 0x55555555;
6655 wb_write[1] = 0x55555555;
6656 wb_write[2] = 0x20; /* SOP */
6657 REG_WR_DMAE(bp, NIG_REG_DEBUG_PACKET_LB, wb_write, 3);
6659 /* NON-IP protocol */
6660 wb_write[0] = 0x09000000;
6661 wb_write[1] = 0x55555555;
6662 wb_write[2] = 0x10; /* EOP, eop_bvalid = 0 */
6663 REG_WR_DMAE(bp, NIG_REG_DEBUG_PACKET_LB, wb_write, 3);
6666 /* some of the internal memories
6667 * are not directly readable from the driver
6668 * to test them we send debug packets
6670 static int bnx2x_int_mem_test(struct bnx2x *bp)
6676 if (CHIP_REV_IS_FPGA(bp))
6678 else if (CHIP_REV_IS_EMUL(bp))
6683 /* Disable inputs of parser neighbor blocks */
6684 REG_WR(bp, TSDM_REG_ENABLE_IN1, 0x0);
6685 REG_WR(bp, TCM_REG_PRS_IFEN, 0x0);
6686 REG_WR(bp, CFC_REG_DEBUG0, 0x1);
6687 REG_WR(bp, NIG_REG_PRS_REQ_IN_EN, 0x0);
6689 /* Write 0 to parser credits for CFC search request */
6690 REG_WR(bp, PRS_REG_CFC_SEARCH_INITIAL_CREDIT, 0x0);
6692 /* send Ethernet packet */
6695 /* TODO do i reset NIG statistic? */
6696 /* Wait until NIG register shows 1 packet of size 0x10 */
6697 count = 1000 * factor;
6700 bnx2x_read_dmae(bp, NIG_REG_STAT2_BRB_OCTET, 2);
6701 val = *bnx2x_sp(bp, wb_data[0]);
6705 usleep_range(10000, 20000);
6709 BNX2X_ERR("NIG timeout val = 0x%x\n", val);
6713 /* Wait until PRS register shows 1 packet */
6714 count = 1000 * factor;
6716 val = REG_RD(bp, PRS_REG_NUM_OF_PACKETS);
6720 usleep_range(10000, 20000);
6724 BNX2X_ERR("PRS timeout val = 0x%x\n", val);
6728 /* Reset and init BRB, PRS */
6729 REG_WR(bp, GRCBASE_MISC + MISC_REGISTERS_RESET_REG_1_CLEAR, 0x03);
6731 REG_WR(bp, GRCBASE_MISC + MISC_REGISTERS_RESET_REG_1_SET, 0x03);
6733 bnx2x_init_block(bp, BLOCK_BRB1, PHASE_COMMON);
6734 bnx2x_init_block(bp, BLOCK_PRS, PHASE_COMMON);
6736 DP(NETIF_MSG_HW, "part2\n");
6738 /* Disable inputs of parser neighbor blocks */
6739 REG_WR(bp, TSDM_REG_ENABLE_IN1, 0x0);
6740 REG_WR(bp, TCM_REG_PRS_IFEN, 0x0);
6741 REG_WR(bp, CFC_REG_DEBUG0, 0x1);
6742 REG_WR(bp, NIG_REG_PRS_REQ_IN_EN, 0x0);
6744 /* Write 0 to parser credits for CFC search request */
6745 REG_WR(bp, PRS_REG_CFC_SEARCH_INITIAL_CREDIT, 0x0);
6747 /* send 10 Ethernet packets */
6748 for (i = 0; i < 10; i++)
6751 /* Wait until NIG register shows 10 + 1
6752 packets of size 11*0x10 = 0xb0 */
6753 count = 1000 * factor;
6756 bnx2x_read_dmae(bp, NIG_REG_STAT2_BRB_OCTET, 2);
6757 val = *bnx2x_sp(bp, wb_data[0]);
6761 usleep_range(10000, 20000);
6765 BNX2X_ERR("NIG timeout val = 0x%x\n", val);
6769 /* Wait until PRS register shows 2 packets */
6770 val = REG_RD(bp, PRS_REG_NUM_OF_PACKETS);
6772 BNX2X_ERR("PRS timeout val = 0x%x\n", val);
6774 /* Write 1 to parser credits for CFC search request */
6775 REG_WR(bp, PRS_REG_CFC_SEARCH_INITIAL_CREDIT, 0x1);
6777 /* Wait until PRS register shows 3 packets */
6778 msleep(10 * factor);
6779 /* Wait until NIG register shows 1 packet of size 0x10 */
6780 val = REG_RD(bp, PRS_REG_NUM_OF_PACKETS);
6782 BNX2X_ERR("PRS timeout val = 0x%x\n", val);
6784 /* clear NIG EOP FIFO */
6785 for (i = 0; i < 11; i++)
6786 REG_RD(bp, NIG_REG_INGRESS_EOP_LB_FIFO);
6787 val = REG_RD(bp, NIG_REG_INGRESS_EOP_LB_EMPTY);
6789 BNX2X_ERR("clear of NIG failed\n");
6793 /* Reset and init BRB, PRS, NIG */
6794 REG_WR(bp, GRCBASE_MISC + MISC_REGISTERS_RESET_REG_1_CLEAR, 0x03);
6796 REG_WR(bp, GRCBASE_MISC + MISC_REGISTERS_RESET_REG_1_SET, 0x03);
6798 bnx2x_init_block(bp, BLOCK_BRB1, PHASE_COMMON);
6799 bnx2x_init_block(bp, BLOCK_PRS, PHASE_COMMON);
6800 if (!CNIC_SUPPORT(bp))
6802 REG_WR(bp, PRS_REG_NIC_MODE, 1);
6804 /* Enable inputs of parser neighbor blocks */
6805 REG_WR(bp, TSDM_REG_ENABLE_IN1, 0x7fffffff);
6806 REG_WR(bp, TCM_REG_PRS_IFEN, 0x1);
6807 REG_WR(bp, CFC_REG_DEBUG0, 0x0);
6808 REG_WR(bp, NIG_REG_PRS_REQ_IN_EN, 0x1);
6810 DP(NETIF_MSG_HW, "done\n");
6815 static void bnx2x_enable_blocks_attention(struct bnx2x *bp)
6819 REG_WR(bp, PXP_REG_PXP_INT_MASK_0, 0);
6820 if (!CHIP_IS_E1x(bp))
6821 REG_WR(bp, PXP_REG_PXP_INT_MASK_1, 0x40);
6823 REG_WR(bp, PXP_REG_PXP_INT_MASK_1, 0);
6824 REG_WR(bp, DORQ_REG_DORQ_INT_MASK, 0);
6825 REG_WR(bp, CFC_REG_CFC_INT_MASK, 0);
6827 * mask read length error interrupts in brb for parser
6828 * (parsing unit and 'checksum and crc' unit)
6829 * these errors are legal (PU reads fixed length and CAC can cause
6830 * read length error on truncated packets)
6832 REG_WR(bp, BRB1_REG_BRB1_INT_MASK, 0xFC00);
6833 REG_WR(bp, QM_REG_QM_INT_MASK, 0);
6834 REG_WR(bp, TM_REG_TM_INT_MASK, 0);
6835 REG_WR(bp, XSDM_REG_XSDM_INT_MASK_0, 0);
6836 REG_WR(bp, XSDM_REG_XSDM_INT_MASK_1, 0);
6837 REG_WR(bp, XCM_REG_XCM_INT_MASK, 0);
6838 /* REG_WR(bp, XSEM_REG_XSEM_INT_MASK_0, 0); */
6839 /* REG_WR(bp, XSEM_REG_XSEM_INT_MASK_1, 0); */
6840 REG_WR(bp, USDM_REG_USDM_INT_MASK_0, 0);
6841 REG_WR(bp, USDM_REG_USDM_INT_MASK_1, 0);
6842 REG_WR(bp, UCM_REG_UCM_INT_MASK, 0);
6843 /* REG_WR(bp, USEM_REG_USEM_INT_MASK_0, 0); */
6844 /* REG_WR(bp, USEM_REG_USEM_INT_MASK_1, 0); */
6845 REG_WR(bp, GRCBASE_UPB + PB_REG_PB_INT_MASK, 0);
6846 REG_WR(bp, CSDM_REG_CSDM_INT_MASK_0, 0);
6847 REG_WR(bp, CSDM_REG_CSDM_INT_MASK_1, 0);
6848 REG_WR(bp, CCM_REG_CCM_INT_MASK, 0);
6849 /* REG_WR(bp, CSEM_REG_CSEM_INT_MASK_0, 0); */
6850 /* REG_WR(bp, CSEM_REG_CSEM_INT_MASK_1, 0); */
6852 val = PXP2_PXP2_INT_MASK_0_REG_PGL_CPL_AFT |
6853 PXP2_PXP2_INT_MASK_0_REG_PGL_CPL_OF |
6854 PXP2_PXP2_INT_MASK_0_REG_PGL_PCIE_ATTN;
6855 if (!CHIP_IS_E1x(bp))
6856 val |= PXP2_PXP2_INT_MASK_0_REG_PGL_READ_BLOCKED |
6857 PXP2_PXP2_INT_MASK_0_REG_PGL_WRITE_BLOCKED;
6858 REG_WR(bp, PXP2_REG_PXP2_INT_MASK_0, val);
6860 REG_WR(bp, TSDM_REG_TSDM_INT_MASK_0, 0);
6861 REG_WR(bp, TSDM_REG_TSDM_INT_MASK_1, 0);
6862 REG_WR(bp, TCM_REG_TCM_INT_MASK, 0);
6863 /* REG_WR(bp, TSEM_REG_TSEM_INT_MASK_0, 0); */
6865 if (!CHIP_IS_E1x(bp))
6866 /* enable VFC attentions: bits 11 and 12, bits 31:13 reserved */
6867 REG_WR(bp, TSEM_REG_TSEM_INT_MASK_1, 0x07ff);
6869 REG_WR(bp, CDU_REG_CDU_INT_MASK, 0);
6870 REG_WR(bp, DMAE_REG_DMAE_INT_MASK, 0);
6871 /* REG_WR(bp, MISC_REG_MISC_INT_MASK, 0); */
6872 REG_WR(bp, PBF_REG_PBF_INT_MASK, 0x18); /* bit 3,4 masked */
6875 static void bnx2x_reset_common(struct bnx2x *bp)
6880 REG_WR(bp, GRCBASE_MISC + MISC_REGISTERS_RESET_REG_1_CLEAR,
6883 if (CHIP_IS_E3(bp)) {
6884 val |= MISC_REGISTERS_RESET_REG_2_MSTAT0;
6885 val |= MISC_REGISTERS_RESET_REG_2_MSTAT1;
6888 REG_WR(bp, GRCBASE_MISC + MISC_REGISTERS_RESET_REG_2_CLEAR, val);
6891 static void bnx2x_setup_dmae(struct bnx2x *bp)
6894 spin_lock_init(&bp->dmae_lock);
6897 static void bnx2x_init_pxp(struct bnx2x *bp)
6900 int r_order, w_order;
6902 pcie_capability_read_word(bp->pdev, PCI_EXP_DEVCTL, &devctl);
6903 DP(NETIF_MSG_HW, "read 0x%x from devctl\n", devctl);
6904 w_order = ((devctl & PCI_EXP_DEVCTL_PAYLOAD) >> 5);
6906 r_order = ((devctl & PCI_EXP_DEVCTL_READRQ) >> 12);
6908 DP(NETIF_MSG_HW, "force read order to %d\n", bp->mrrs);
6912 bnx2x_init_pxp_arb(bp, r_order, w_order);
6915 static void bnx2x_setup_fan_failure_detection(struct bnx2x *bp)
6925 val = SHMEM_RD(bp, dev_info.shared_hw_config.config2) &
6926 SHARED_HW_CFG_FAN_FAILURE_MASK;
6928 if (val == SHARED_HW_CFG_FAN_FAILURE_ENABLED)
6932 * The fan failure mechanism is usually related to the PHY type since
6933 * the power consumption of the board is affected by the PHY. Currently,
6934 * fan is required for most designs with SFX7101, BCM8727 and BCM8481.
6936 else if (val == SHARED_HW_CFG_FAN_FAILURE_PHY_TYPE)
6937 for (port = PORT_0; port < PORT_MAX; port++) {
6939 bnx2x_fan_failure_det_req(
6941 bp->common.shmem_base,
6942 bp->common.shmem2_base,
6946 DP(NETIF_MSG_HW, "fan detection setting: %d\n", is_required);
6948 if (is_required == 0)
6951 /* Fan failure is indicated by SPIO 5 */
6952 bnx2x_set_spio(bp, MISC_SPIO_SPIO5, MISC_SPIO_INPUT_HI_Z);
6954 /* set to active low mode */
6955 val = REG_RD(bp, MISC_REG_SPIO_INT);
6956 val |= (MISC_SPIO_SPIO5 << MISC_SPIO_INT_OLD_SET_POS);
6957 REG_WR(bp, MISC_REG_SPIO_INT, val);
6959 /* enable interrupt to signal the IGU */
6960 val = REG_RD(bp, MISC_REG_SPIO_EVENT_EN);
6961 val |= MISC_SPIO_SPIO5;
6962 REG_WR(bp, MISC_REG_SPIO_EVENT_EN, val);
6965 void bnx2x_pf_disable(struct bnx2x *bp)
6967 u32 val = REG_RD(bp, IGU_REG_PF_CONFIGURATION);
6968 val &= ~IGU_PF_CONF_FUNC_EN;
6970 REG_WR(bp, IGU_REG_PF_CONFIGURATION, val);
6971 REG_WR(bp, PGLUE_B_REG_INTERNAL_PFID_ENABLE_MASTER, 0);
6972 REG_WR(bp, CFC_REG_WEAK_ENABLE_PF, 0);
6975 static void bnx2x__common_init_phy(struct bnx2x *bp)
6977 u32 shmem_base[2], shmem2_base[2];
6978 /* Avoid common init in case MFW supports LFA */
6979 if (SHMEM2_RD(bp, size) >
6980 (u32)offsetof(struct shmem2_region, lfa_host_addr[BP_PORT(bp)]))
6982 shmem_base[0] = bp->common.shmem_base;
6983 shmem2_base[0] = bp->common.shmem2_base;
6984 if (!CHIP_IS_E1x(bp)) {
6986 SHMEM2_RD(bp, other_shmem_base_addr);
6988 SHMEM2_RD(bp, other_shmem2_base_addr);
6990 bnx2x_acquire_phy_lock(bp);
6991 bnx2x_common_init_phy(bp, shmem_base, shmem2_base,
6992 bp->common.chip_id);
6993 bnx2x_release_phy_lock(bp);
6996 static void bnx2x_config_endianity(struct bnx2x *bp, u32 val)
6998 REG_WR(bp, PXP2_REG_RQ_QM_ENDIAN_M, val);
6999 REG_WR(bp, PXP2_REG_RQ_TM_ENDIAN_M, val);
7000 REG_WR(bp, PXP2_REG_RQ_SRC_ENDIAN_M, val);
7001 REG_WR(bp, PXP2_REG_RQ_CDU_ENDIAN_M, val);
7002 REG_WR(bp, PXP2_REG_RQ_DBG_ENDIAN_M, val);
7004 /* make sure this value is 0 */
7005 REG_WR(bp, PXP2_REG_RQ_HC_ENDIAN_M, 0);
7007 REG_WR(bp, PXP2_REG_RD_QM_SWAP_MODE, val);
7008 REG_WR(bp, PXP2_REG_RD_TM_SWAP_MODE, val);
7009 REG_WR(bp, PXP2_REG_RD_SRC_SWAP_MODE, val);
7010 REG_WR(bp, PXP2_REG_RD_CDURD_SWAP_MODE, val);
7013 static void bnx2x_set_endianity(struct bnx2x *bp)
7016 bnx2x_config_endianity(bp, 1);
7018 bnx2x_config_endianity(bp, 0);
7022 static void bnx2x_reset_endianity(struct bnx2x *bp)
7024 bnx2x_config_endianity(bp, 0);
7028 * bnx2x_init_hw_common - initialize the HW at the COMMON phase.
7030 * @bp: driver handle
7032 static int bnx2x_init_hw_common(struct bnx2x *bp)
7036 DP(NETIF_MSG_HW, "starting common init func %d\n", BP_ABS_FUNC(bp));
7039 * take the RESET lock to protect undi_unload flow from accessing
7040 * registers while we're resetting the chip
7042 bnx2x_acquire_hw_lock(bp, HW_LOCK_RESOURCE_RESET);
7044 bnx2x_reset_common(bp);
7045 REG_WR(bp, GRCBASE_MISC + MISC_REGISTERS_RESET_REG_1_SET, 0xffffffff);
7048 if (CHIP_IS_E3(bp)) {
7049 val |= MISC_REGISTERS_RESET_REG_2_MSTAT0;
7050 val |= MISC_REGISTERS_RESET_REG_2_MSTAT1;
7052 REG_WR(bp, GRCBASE_MISC + MISC_REGISTERS_RESET_REG_2_SET, val);
7054 bnx2x_release_hw_lock(bp, HW_LOCK_RESOURCE_RESET);
7056 bnx2x_init_block(bp, BLOCK_MISC, PHASE_COMMON);
7058 if (!CHIP_IS_E1x(bp)) {
7062 * 4-port mode or 2-port mode we need to turn of master-enable
7063 * for everyone, after that, turn it back on for self.
7064 * so, we disregard multi-function or not, and always disable
7065 * for all functions on the given path, this means 0,2,4,6 for
7066 * path 0 and 1,3,5,7 for path 1
7068 for (abs_func_id = BP_PATH(bp);
7069 abs_func_id < E2_FUNC_MAX*2; abs_func_id += 2) {
7070 if (abs_func_id == BP_ABS_FUNC(bp)) {
7072 PGLUE_B_REG_INTERNAL_PFID_ENABLE_MASTER,
7077 bnx2x_pretend_func(bp, abs_func_id);
7078 /* clear pf enable */
7079 bnx2x_pf_disable(bp);
7080 bnx2x_pretend_func(bp, BP_ABS_FUNC(bp));
7084 bnx2x_init_block(bp, BLOCK_PXP, PHASE_COMMON);
7085 if (CHIP_IS_E1(bp)) {
7086 /* enable HW interrupt from PXP on USDM overflow
7087 bit 16 on INT_MASK_0 */
7088 REG_WR(bp, PXP_REG_PXP_INT_MASK_0, 0);
7091 bnx2x_init_block(bp, BLOCK_PXP2, PHASE_COMMON);
7093 bnx2x_set_endianity(bp);
7094 bnx2x_ilt_init_page_size(bp, INITOP_SET);
7096 if (CHIP_REV_IS_FPGA(bp) && CHIP_IS_E1H(bp))
7097 REG_WR(bp, PXP2_REG_PGL_TAGS_LIMIT, 0x1);
7099 /* let the HW do it's magic ... */
7101 /* finish PXP init */
7102 val = REG_RD(bp, PXP2_REG_RQ_CFG_DONE);
7104 BNX2X_ERR("PXP2 CFG failed\n");
7107 val = REG_RD(bp, PXP2_REG_RD_INIT_DONE);
7109 BNX2X_ERR("PXP2 RD_INIT failed\n");
7113 /* Timers bug workaround E2 only. We need to set the entire ILT to
7114 * have entries with value "0" and valid bit on.
7115 * This needs to be done by the first PF that is loaded in a path
7116 * (i.e. common phase)
7118 if (!CHIP_IS_E1x(bp)) {
7119 /* In E2 there is a bug in the timers block that can cause function 6 / 7
7120 * (i.e. vnic3) to start even if it is marked as "scan-off".
7121 * This occurs when a different function (func2,3) is being marked
7122 * as "scan-off". Real-life scenario for example: if a driver is being
7123 * load-unloaded while func6,7 are down. This will cause the timer to access
7124 * the ilt, translate to a logical address and send a request to read/write.
7125 * Since the ilt for the function that is down is not valid, this will cause
7126 * a translation error which is unrecoverable.
7127 * The Workaround is intended to make sure that when this happens nothing fatal
7128 * will occur. The workaround:
7129 * 1. First PF driver which loads on a path will:
7130 * a. After taking the chip out of reset, by using pretend,
7131 * it will write "0" to the following registers of
7133 * REG_WR(pdev, PGLUE_B_REG_INTERNAL_PFID_ENABLE_MASTER, 0);
7134 * REG_WR(pdev, CFC_REG_WEAK_ENABLE_PF,0);
7135 * REG_WR(pdev, CFC_REG_STRONG_ENABLE_PF,0);
7136 * And for itself it will write '1' to
7137 * PGLUE_B_REG_INTERNAL_PFID_ENABLE_MASTER to enable
7138 * dmae-operations (writing to pram for example.)
7139 * note: can be done for only function 6,7 but cleaner this
7141 * b. Write zero+valid to the entire ILT.
7142 * c. Init the first_timers_ilt_entry, last_timers_ilt_entry of
7143 * VNIC3 (of that port). The range allocated will be the
7144 * entire ILT. This is needed to prevent ILT range error.
7145 * 2. Any PF driver load flow:
7146 * a. ILT update with the physical addresses of the allocated
7148 * b. Wait 20msec. - note that this timeout is needed to make
7149 * sure there are no requests in one of the PXP internal
7150 * queues with "old" ILT addresses.
7151 * c. PF enable in the PGLC.
7152 * d. Clear the was_error of the PF in the PGLC. (could have
7153 * occurred while driver was down)
7154 * e. PF enable in the CFC (WEAK + STRONG)
7155 * f. Timers scan enable
7156 * 3. PF driver unload flow:
7157 * a. Clear the Timers scan_en.
7158 * b. Polling for scan_on=0 for that PF.
7159 * c. Clear the PF enable bit in the PXP.
7160 * d. Clear the PF enable in the CFC (WEAK + STRONG)
7161 * e. Write zero+valid to all ILT entries (The valid bit must
7163 * f. If this is VNIC 3 of a port then also init
7164 * first_timers_ilt_entry to zero and last_timers_ilt_entry
7165 * to the last entry in the ILT.
7168 * Currently the PF error in the PGLC is non recoverable.
7169 * In the future the there will be a recovery routine for this error.
7170 * Currently attention is masked.
7171 * Having an MCP lock on the load/unload process does not guarantee that
7172 * there is no Timer disable during Func6/7 enable. This is because the
7173 * Timers scan is currently being cleared by the MCP on FLR.
7174 * Step 2.d can be done only for PF6/7 and the driver can also check if
7175 * there is error before clearing it. But the flow above is simpler and
7177 * All ILT entries are written by zero+valid and not just PF6/7
7178 * ILT entries since in the future the ILT entries allocation for
7179 * PF-s might be dynamic.
7181 struct ilt_client_info ilt_cli;
7182 struct bnx2x_ilt ilt;
7183 memset(&ilt_cli, 0, sizeof(struct ilt_client_info));
7184 memset(&ilt, 0, sizeof(struct bnx2x_ilt));
7186 /* initialize dummy TM client */
7188 ilt_cli.end = ILT_NUM_PAGE_ENTRIES - 1;
7189 ilt_cli.client_num = ILT_CLIENT_TM;
7191 /* Step 1: set zeroes to all ilt page entries with valid bit on
7192 * Step 2: set the timers first/last ilt entry to point
7193 * to the entire range to prevent ILT range error for 3rd/4th
7194 * vnic (this code assumes existence of the vnic)
7196 * both steps performed by call to bnx2x_ilt_client_init_op()
7197 * with dummy TM client
7199 * we must use pretend since PXP2_REG_RQ_##blk##_FIRST_ILT
7200 * and his brother are split registers
7202 bnx2x_pretend_func(bp, (BP_PATH(bp) + 6));
7203 bnx2x_ilt_client_init_op_ilt(bp, &ilt, &ilt_cli, INITOP_CLEAR);
7204 bnx2x_pretend_func(bp, BP_ABS_FUNC(bp));
7206 REG_WR(bp, PXP2_REG_RQ_DRAM_ALIGN, BNX2X_PXP_DRAM_ALIGN);
7207 REG_WR(bp, PXP2_REG_RQ_DRAM_ALIGN_RD, BNX2X_PXP_DRAM_ALIGN);
7208 REG_WR(bp, PXP2_REG_RQ_DRAM_ALIGN_SEL, 1);
7211 REG_WR(bp, PXP2_REG_RQ_DISABLE_INPUTS, 0);
7212 REG_WR(bp, PXP2_REG_RD_DISABLE_INPUTS, 0);
7214 if (!CHIP_IS_E1x(bp)) {
7215 int factor = CHIP_REV_IS_EMUL(bp) ? 1000 :
7216 (CHIP_REV_IS_FPGA(bp) ? 400 : 0);
7217 bnx2x_init_block(bp, BLOCK_PGLUE_B, PHASE_COMMON);
7219 bnx2x_init_block(bp, BLOCK_ATC, PHASE_COMMON);
7221 /* let the HW do it's magic ... */
7224 val = REG_RD(bp, ATC_REG_ATC_INIT_DONE);
7225 } while (factor-- && (val != 1));
7228 BNX2X_ERR("ATC_INIT failed\n");
7233 bnx2x_init_block(bp, BLOCK_DMAE, PHASE_COMMON);
7235 bnx2x_iov_init_dmae(bp);
7237 /* clean the DMAE memory */
7239 bnx2x_init_fill(bp, TSEM_REG_PRAM, 0, 8, 1);
7241 bnx2x_init_block(bp, BLOCK_TCM, PHASE_COMMON);
7243 bnx2x_init_block(bp, BLOCK_UCM, PHASE_COMMON);
7245 bnx2x_init_block(bp, BLOCK_CCM, PHASE_COMMON);
7247 bnx2x_init_block(bp, BLOCK_XCM, PHASE_COMMON);
7249 bnx2x_read_dmae(bp, XSEM_REG_PASSIVE_BUFFER, 3);
7250 bnx2x_read_dmae(bp, CSEM_REG_PASSIVE_BUFFER, 3);
7251 bnx2x_read_dmae(bp, TSEM_REG_PASSIVE_BUFFER, 3);
7252 bnx2x_read_dmae(bp, USEM_REG_PASSIVE_BUFFER, 3);
7254 bnx2x_init_block(bp, BLOCK_QM, PHASE_COMMON);
7256 /* QM queues pointers table */
7257 bnx2x_qm_init_ptr_table(bp, bp->qm_cid_count, INITOP_SET);
7259 /* soft reset pulse */
7260 REG_WR(bp, QM_REG_SOFT_RESET, 1);
7261 REG_WR(bp, QM_REG_SOFT_RESET, 0);
7263 if (CNIC_SUPPORT(bp))
7264 bnx2x_init_block(bp, BLOCK_TM, PHASE_COMMON);
7266 bnx2x_init_block(bp, BLOCK_DORQ, PHASE_COMMON);
7268 if (!CHIP_REV_IS_SLOW(bp))
7269 /* enable hw interrupt from doorbell Q */
7270 REG_WR(bp, DORQ_REG_DORQ_INT_MASK, 0);
7272 bnx2x_init_block(bp, BLOCK_BRB1, PHASE_COMMON);
7274 bnx2x_init_block(bp, BLOCK_PRS, PHASE_COMMON);
7275 REG_WR(bp, PRS_REG_A_PRSU_20, 0xf);
7277 if (!CHIP_IS_E1(bp))
7278 REG_WR(bp, PRS_REG_E1HOV_MODE, bp->path_has_ovlan);
7280 if (!CHIP_IS_E1x(bp) && !CHIP_IS_E3B0(bp)) {
7281 if (IS_MF_AFEX(bp)) {
7282 /* configure that VNTag and VLAN headers must be
7283 * received in afex mode
7285 REG_WR(bp, PRS_REG_HDRS_AFTER_BASIC, 0xE);
7286 REG_WR(bp, PRS_REG_MUST_HAVE_HDRS, 0xA);
7287 REG_WR(bp, PRS_REG_HDRS_AFTER_TAG_0, 0x6);
7288 REG_WR(bp, PRS_REG_TAG_ETHERTYPE_0, 0x8926);
7289 REG_WR(bp, PRS_REG_TAG_LEN_0, 0x4);
7291 /* Bit-map indicating which L2 hdrs may appear
7292 * after the basic Ethernet header
7294 REG_WR(bp, PRS_REG_HDRS_AFTER_BASIC,
7295 bp->path_has_ovlan ? 7 : 6);
7299 bnx2x_init_block(bp, BLOCK_TSDM, PHASE_COMMON);
7300 bnx2x_init_block(bp, BLOCK_CSDM, PHASE_COMMON);
7301 bnx2x_init_block(bp, BLOCK_USDM, PHASE_COMMON);
7302 bnx2x_init_block(bp, BLOCK_XSDM, PHASE_COMMON);
7304 if (!CHIP_IS_E1x(bp)) {
7305 /* reset VFC memories */
7306 REG_WR(bp, TSEM_REG_FAST_MEMORY + VFC_REG_MEMORIES_RST,
7307 VFC_MEMORIES_RST_REG_CAM_RST |
7308 VFC_MEMORIES_RST_REG_RAM_RST);
7309 REG_WR(bp, XSEM_REG_FAST_MEMORY + VFC_REG_MEMORIES_RST,
7310 VFC_MEMORIES_RST_REG_CAM_RST |
7311 VFC_MEMORIES_RST_REG_RAM_RST);
7316 bnx2x_init_block(bp, BLOCK_TSEM, PHASE_COMMON);
7317 bnx2x_init_block(bp, BLOCK_USEM, PHASE_COMMON);
7318 bnx2x_init_block(bp, BLOCK_CSEM, PHASE_COMMON);
7319 bnx2x_init_block(bp, BLOCK_XSEM, PHASE_COMMON);
7322 REG_WR(bp, GRCBASE_MISC + MISC_REGISTERS_RESET_REG_1_CLEAR,
7324 REG_WR(bp, GRCBASE_MISC + MISC_REGISTERS_RESET_REG_1_SET,
7327 bnx2x_init_block(bp, BLOCK_UPB, PHASE_COMMON);
7328 bnx2x_init_block(bp, BLOCK_XPB, PHASE_COMMON);
7329 bnx2x_init_block(bp, BLOCK_PBF, PHASE_COMMON);
7331 if (!CHIP_IS_E1x(bp)) {
7332 if (IS_MF_AFEX(bp)) {
7333 /* configure that VNTag and VLAN headers must be
7336 REG_WR(bp, PBF_REG_HDRS_AFTER_BASIC, 0xE);
7337 REG_WR(bp, PBF_REG_MUST_HAVE_HDRS, 0xA);
7338 REG_WR(bp, PBF_REG_HDRS_AFTER_TAG_0, 0x6);
7339 REG_WR(bp, PBF_REG_TAG_ETHERTYPE_0, 0x8926);
7340 REG_WR(bp, PBF_REG_TAG_LEN_0, 0x4);
7342 REG_WR(bp, PBF_REG_HDRS_AFTER_BASIC,
7343 bp->path_has_ovlan ? 7 : 6);
7347 REG_WR(bp, SRC_REG_SOFT_RST, 1);
7349 bnx2x_init_block(bp, BLOCK_SRC, PHASE_COMMON);
7351 if (CNIC_SUPPORT(bp)) {
7352 REG_WR(bp, SRC_REG_KEYSEARCH_0, 0x63285672);
7353 REG_WR(bp, SRC_REG_KEYSEARCH_1, 0x24b8f2cc);
7354 REG_WR(bp, SRC_REG_KEYSEARCH_2, 0x223aef9b);
7355 REG_WR(bp, SRC_REG_KEYSEARCH_3, 0x26001e3a);
7356 REG_WR(bp, SRC_REG_KEYSEARCH_4, 0x7ae91116);
7357 REG_WR(bp, SRC_REG_KEYSEARCH_5, 0x5ce5230b);
7358 REG_WR(bp, SRC_REG_KEYSEARCH_6, 0x298d8adf);
7359 REG_WR(bp, SRC_REG_KEYSEARCH_7, 0x6eb0ff09);
7360 REG_WR(bp, SRC_REG_KEYSEARCH_8, 0x1830f82f);
7361 REG_WR(bp, SRC_REG_KEYSEARCH_9, 0x01e46be7);
7363 REG_WR(bp, SRC_REG_SOFT_RST, 0);
7365 if (sizeof(union cdu_context) != 1024)
7366 /* we currently assume that a context is 1024 bytes */
7367 dev_alert(&bp->pdev->dev,
7368 "please adjust the size of cdu_context(%ld)\n",
7369 (long)sizeof(union cdu_context));
7371 bnx2x_init_block(bp, BLOCK_CDU, PHASE_COMMON);
7372 val = (4 << 24) + (0 << 12) + 1024;
7373 REG_WR(bp, CDU_REG_CDU_GLOBAL_PARAMS, val);
7375 bnx2x_init_block(bp, BLOCK_CFC, PHASE_COMMON);
7376 REG_WR(bp, CFC_REG_INIT_REG, 0x7FF);
7377 /* enable context validation interrupt from CFC */
7378 REG_WR(bp, CFC_REG_CFC_INT_MASK, 0);
7380 /* set the thresholds to prevent CFC/CDU race */
7381 REG_WR(bp, CFC_REG_DEBUG0, 0x20020000);
7383 bnx2x_init_block(bp, BLOCK_HC, PHASE_COMMON);
7385 if (!CHIP_IS_E1x(bp) && BP_NOMCP(bp))
7386 REG_WR(bp, IGU_REG_RESET_MEMORIES, 0x36);
7388 bnx2x_init_block(bp, BLOCK_IGU, PHASE_COMMON);
7389 bnx2x_init_block(bp, BLOCK_MISC_AEU, PHASE_COMMON);
7391 /* Reset PCIE errors for debug */
7392 REG_WR(bp, 0x2814, 0xffffffff);
7393 REG_WR(bp, 0x3820, 0xffffffff);
7395 if (!CHIP_IS_E1x(bp)) {
7396 REG_WR(bp, PCICFG_OFFSET + PXPCS_TL_CONTROL_5,
7397 (PXPCS_TL_CONTROL_5_ERR_UNSPPORT1 |
7398 PXPCS_TL_CONTROL_5_ERR_UNSPPORT));
7399 REG_WR(bp, PCICFG_OFFSET + PXPCS_TL_FUNC345_STAT,
7400 (PXPCS_TL_FUNC345_STAT_ERR_UNSPPORT4 |
7401 PXPCS_TL_FUNC345_STAT_ERR_UNSPPORT3 |
7402 PXPCS_TL_FUNC345_STAT_ERR_UNSPPORT2));
7403 REG_WR(bp, PCICFG_OFFSET + PXPCS_TL_FUNC678_STAT,
7404 (PXPCS_TL_FUNC678_STAT_ERR_UNSPPORT7 |
7405 PXPCS_TL_FUNC678_STAT_ERR_UNSPPORT6 |
7406 PXPCS_TL_FUNC678_STAT_ERR_UNSPPORT5));
7409 bnx2x_init_block(bp, BLOCK_NIG, PHASE_COMMON);
7410 if (!CHIP_IS_E1(bp)) {
7411 /* in E3 this done in per-port section */
7412 if (!CHIP_IS_E3(bp))
7413 REG_WR(bp, NIG_REG_LLH_MF_MODE, IS_MF(bp));
7415 if (CHIP_IS_E1H(bp))
7416 /* not applicable for E2 (and above ...) */
7417 REG_WR(bp, NIG_REG_LLH_E1HOV_MODE, IS_MF_SD(bp));
7419 if (CHIP_REV_IS_SLOW(bp))
7422 /* finish CFC init */
7423 val = reg_poll(bp, CFC_REG_LL_INIT_DONE, 1, 100, 10);
7425 BNX2X_ERR("CFC LL_INIT failed\n");
7428 val = reg_poll(bp, CFC_REG_AC_INIT_DONE, 1, 100, 10);
7430 BNX2X_ERR("CFC AC_INIT failed\n");
7433 val = reg_poll(bp, CFC_REG_CAM_INIT_DONE, 1, 100, 10);
7435 BNX2X_ERR("CFC CAM_INIT failed\n");
7438 REG_WR(bp, CFC_REG_DEBUG0, 0);
7440 if (CHIP_IS_E1(bp)) {
7441 /* read NIG statistic
7442 to see if this is our first up since powerup */
7443 bnx2x_read_dmae(bp, NIG_REG_STAT2_BRB_OCTET, 2);
7444 val = *bnx2x_sp(bp, wb_data[0]);
7446 /* do internal memory self test */
7447 if ((val == 0) && bnx2x_int_mem_test(bp)) {
7448 BNX2X_ERR("internal mem self test failed\n");
7453 bnx2x_setup_fan_failure_detection(bp);
7455 /* clear PXP2 attentions */
7456 REG_RD(bp, PXP2_REG_PXP2_INT_STS_CLR_0);
7458 bnx2x_enable_blocks_attention(bp);
7459 bnx2x_enable_blocks_parity(bp);
7461 if (!BP_NOMCP(bp)) {
7462 if (CHIP_IS_E1x(bp))
7463 bnx2x__common_init_phy(bp);
7465 BNX2X_ERR("Bootcode is missing - can not initialize link\n");
7467 if (SHMEM2_HAS(bp, netproc_fw_ver))
7468 SHMEM2_WR(bp, netproc_fw_ver, REG_RD(bp, XSEM_REG_PRAM));
7474 * bnx2x_init_hw_common_chip - init HW at the COMMON_CHIP phase.
7476 * @bp: driver handle
7478 static int bnx2x_init_hw_common_chip(struct bnx2x *bp)
7480 int rc = bnx2x_init_hw_common(bp);
7485 /* In E2 2-PORT mode, same ext phy is used for the two paths */
7487 bnx2x__common_init_phy(bp);
7492 static int bnx2x_init_hw_port(struct bnx2x *bp)
7494 int port = BP_PORT(bp);
7495 int init_phase = port ? PHASE_PORT1 : PHASE_PORT0;
7499 DP(NETIF_MSG_HW, "starting port init port %d\n", port);
7501 REG_WR(bp, NIG_REG_MASK_INTERRUPT_PORT0 + port*4, 0);
7503 bnx2x_init_block(bp, BLOCK_MISC, init_phase);
7504 bnx2x_init_block(bp, BLOCK_PXP, init_phase);
7505 bnx2x_init_block(bp, BLOCK_PXP2, init_phase);
7507 /* Timers bug workaround: disables the pf_master bit in pglue at
7508 * common phase, we need to enable it here before any dmae access are
7509 * attempted. Therefore we manually added the enable-master to the
7510 * port phase (it also happens in the function phase)
7512 if (!CHIP_IS_E1x(bp))
7513 REG_WR(bp, PGLUE_B_REG_INTERNAL_PFID_ENABLE_MASTER, 1);
7515 bnx2x_init_block(bp, BLOCK_ATC, init_phase);
7516 bnx2x_init_block(bp, BLOCK_DMAE, init_phase);
7517 bnx2x_init_block(bp, BLOCK_PGLUE_B, init_phase);
7518 bnx2x_init_block(bp, BLOCK_QM, init_phase);
7520 bnx2x_init_block(bp, BLOCK_TCM, init_phase);
7521 bnx2x_init_block(bp, BLOCK_UCM, init_phase);
7522 bnx2x_init_block(bp, BLOCK_CCM, init_phase);
7523 bnx2x_init_block(bp, BLOCK_XCM, init_phase);
7525 /* QM cid (connection) count */
7526 bnx2x_qm_init_cid_count(bp, bp->qm_cid_count, INITOP_SET);
7528 if (CNIC_SUPPORT(bp)) {
7529 bnx2x_init_block(bp, BLOCK_TM, init_phase);
7530 REG_WR(bp, TM_REG_LIN0_SCAN_TIME + port*4, 20);
7531 REG_WR(bp, TM_REG_LIN0_MAX_ACTIVE_CID + port*4, 31);
7534 bnx2x_init_block(bp, BLOCK_DORQ, init_phase);
7536 bnx2x_init_block(bp, BLOCK_BRB1, init_phase);
7538 if (CHIP_IS_E1(bp) || CHIP_IS_E1H(bp)) {
7541 low = ((bp->flags & ONE_PORT_FLAG) ? 160 : 246);
7542 else if (bp->dev->mtu > 4096) {
7543 if (bp->flags & ONE_PORT_FLAG)
7547 /* (24*1024 + val*4)/256 */
7548 low = 96 + (val/64) +
7549 ((val % 64) ? 1 : 0);
7552 low = ((bp->flags & ONE_PORT_FLAG) ? 80 : 160);
7553 high = low + 56; /* 14*1024/256 */
7554 REG_WR(bp, BRB1_REG_PAUSE_LOW_THRESHOLD_0 + port*4, low);
7555 REG_WR(bp, BRB1_REG_PAUSE_HIGH_THRESHOLD_0 + port*4, high);
7558 if (CHIP_MODE_IS_4_PORT(bp))
7559 REG_WR(bp, (BP_PORT(bp) ?
7560 BRB1_REG_MAC_GUARANTIED_1 :
7561 BRB1_REG_MAC_GUARANTIED_0), 40);
7563 bnx2x_init_block(bp, BLOCK_PRS, init_phase);
7564 if (CHIP_IS_E3B0(bp)) {
7565 if (IS_MF_AFEX(bp)) {
7566 /* configure headers for AFEX mode */
7567 REG_WR(bp, BP_PORT(bp) ?
7568 PRS_REG_HDRS_AFTER_BASIC_PORT_1 :
7569 PRS_REG_HDRS_AFTER_BASIC_PORT_0, 0xE);
7570 REG_WR(bp, BP_PORT(bp) ?
7571 PRS_REG_HDRS_AFTER_TAG_0_PORT_1 :
7572 PRS_REG_HDRS_AFTER_TAG_0_PORT_0, 0x6);
7573 REG_WR(bp, BP_PORT(bp) ?
7574 PRS_REG_MUST_HAVE_HDRS_PORT_1 :
7575 PRS_REG_MUST_HAVE_HDRS_PORT_0, 0xA);
7577 /* Ovlan exists only if we are in multi-function +
7578 * switch-dependent mode, in switch-independent there
7579 * is no ovlan headers
7581 REG_WR(bp, BP_PORT(bp) ?
7582 PRS_REG_HDRS_AFTER_BASIC_PORT_1 :
7583 PRS_REG_HDRS_AFTER_BASIC_PORT_0,
7584 (bp->path_has_ovlan ? 7 : 6));
7588 bnx2x_init_block(bp, BLOCK_TSDM, init_phase);
7589 bnx2x_init_block(bp, BLOCK_CSDM, init_phase);
7590 bnx2x_init_block(bp, BLOCK_USDM, init_phase);
7591 bnx2x_init_block(bp, BLOCK_XSDM, init_phase);
7593 bnx2x_init_block(bp, BLOCK_TSEM, init_phase);
7594 bnx2x_init_block(bp, BLOCK_USEM, init_phase);
7595 bnx2x_init_block(bp, BLOCK_CSEM, init_phase);
7596 bnx2x_init_block(bp, BLOCK_XSEM, init_phase);
7598 bnx2x_init_block(bp, BLOCK_UPB, init_phase);
7599 bnx2x_init_block(bp, BLOCK_XPB, init_phase);
7601 bnx2x_init_block(bp, BLOCK_PBF, init_phase);
7603 if (CHIP_IS_E1x(bp)) {
7604 /* configure PBF to work without PAUSE mtu 9000 */
7605 REG_WR(bp, PBF_REG_P0_PAUSE_ENABLE + port*4, 0);
7607 /* update threshold */
7608 REG_WR(bp, PBF_REG_P0_ARB_THRSH + port*4, (9040/16));
7609 /* update init credit */
7610 REG_WR(bp, PBF_REG_P0_INIT_CRD + port*4, (9040/16) + 553 - 22);
7613 REG_WR(bp, PBF_REG_INIT_P0 + port*4, 1);
7615 REG_WR(bp, PBF_REG_INIT_P0 + port*4, 0);
7618 if (CNIC_SUPPORT(bp))
7619 bnx2x_init_block(bp, BLOCK_SRC, init_phase);
7621 bnx2x_init_block(bp, BLOCK_CDU, init_phase);
7622 bnx2x_init_block(bp, BLOCK_CFC, init_phase);
7624 if (CHIP_IS_E1(bp)) {
7625 REG_WR(bp, HC_REG_LEADING_EDGE_0 + port*8, 0);
7626 REG_WR(bp, HC_REG_TRAILING_EDGE_0 + port*8, 0);
7628 bnx2x_init_block(bp, BLOCK_HC, init_phase);
7630 bnx2x_init_block(bp, BLOCK_IGU, init_phase);
7632 bnx2x_init_block(bp, BLOCK_MISC_AEU, init_phase);
7633 /* init aeu_mask_attn_func_0/1:
7634 * - SF mode: bits 3-7 are masked. Only bits 0-2 are in use
7635 * - MF mode: bit 3 is masked. Bits 0-2 are in use as in SF
7636 * bits 4-7 are used for "per vn group attention" */
7637 val = IS_MF(bp) ? 0xF7 : 0x7;
7638 /* Enable DCBX attention for all but E1 */
7639 val |= CHIP_IS_E1(bp) ? 0 : 0x10;
7640 REG_WR(bp, MISC_REG_AEU_MASK_ATTN_FUNC_0 + port*4, val);
7642 /* SCPAD_PARITY should NOT trigger close the gates */
7643 reg = port ? MISC_REG_AEU_ENABLE4_NIG_1 : MISC_REG_AEU_ENABLE4_NIG_0;
7646 ~AEU_INPUTS_ATTN_BITS_MCP_LATCHED_SCPAD_PARITY);
7648 reg = port ? MISC_REG_AEU_ENABLE4_PXP_1 : MISC_REG_AEU_ENABLE4_PXP_0;
7651 ~AEU_INPUTS_ATTN_BITS_MCP_LATCHED_SCPAD_PARITY);
7653 bnx2x_init_block(bp, BLOCK_NIG, init_phase);
7655 if (!CHIP_IS_E1x(bp)) {
7656 /* Bit-map indicating which L2 hdrs may appear after the
7657 * basic Ethernet header
7660 REG_WR(bp, BP_PORT(bp) ?
7661 NIG_REG_P1_HDRS_AFTER_BASIC :
7662 NIG_REG_P0_HDRS_AFTER_BASIC, 0xE);
7664 REG_WR(bp, BP_PORT(bp) ?
7665 NIG_REG_P1_HDRS_AFTER_BASIC :
7666 NIG_REG_P0_HDRS_AFTER_BASIC,
7667 IS_MF_SD(bp) ? 7 : 6);
7670 REG_WR(bp, BP_PORT(bp) ?
7671 NIG_REG_LLH1_MF_MODE :
7672 NIG_REG_LLH_MF_MODE, IS_MF(bp));
7674 if (!CHIP_IS_E3(bp))
7675 REG_WR(bp, NIG_REG_XGXS_SERDES0_MODE_SEL + port*4, 1);
7677 if (!CHIP_IS_E1(bp)) {
7678 /* 0x2 disable mf_ov, 0x1 enable */
7679 REG_WR(bp, NIG_REG_LLH0_BRB1_DRV_MASK_MF + port*4,
7680 (IS_MF_SD(bp) ? 0x1 : 0x2));
7682 if (!CHIP_IS_E1x(bp)) {
7684 switch (bp->mf_mode) {
7685 case MULTI_FUNCTION_SD:
7688 case MULTI_FUNCTION_SI:
7689 case MULTI_FUNCTION_AFEX:
7694 REG_WR(bp, (BP_PORT(bp) ? NIG_REG_LLH1_CLS_TYPE :
7695 NIG_REG_LLH0_CLS_TYPE), val);
7698 REG_WR(bp, NIG_REG_LLFC_ENABLE_0 + port*4, 0);
7699 REG_WR(bp, NIG_REG_LLFC_OUT_EN_0 + port*4, 0);
7700 REG_WR(bp, NIG_REG_PAUSE_ENABLE_0 + port*4, 1);
7704 /* If SPIO5 is set to generate interrupts, enable it for this port */
7705 val = REG_RD(bp, MISC_REG_SPIO_EVENT_EN);
7706 if (val & MISC_SPIO_SPIO5) {
7707 u32 reg_addr = (port ? MISC_REG_AEU_ENABLE1_FUNC_1_OUT_0 :
7708 MISC_REG_AEU_ENABLE1_FUNC_0_OUT_0);
7709 val = REG_RD(bp, reg_addr);
7710 val |= AEU_INPUTS_ATTN_BITS_SPIO5;
7711 REG_WR(bp, reg_addr, val);
7714 if (CHIP_IS_E3B0(bp))
7715 bp->flags |= PTP_SUPPORTED;
7720 static void bnx2x_ilt_wr(struct bnx2x *bp, u32 index, dma_addr_t addr)
7726 reg = PXP2_REG_RQ_ONCHIP_AT + index*8;
7728 reg = PXP2_REG_RQ_ONCHIP_AT_B0 + index*8;
7730 wb_write[0] = ONCHIP_ADDR1(addr);
7731 wb_write[1] = ONCHIP_ADDR2(addr);
7732 REG_WR_DMAE(bp, reg, wb_write, 2);
7735 void bnx2x_igu_clear_sb_gen(struct bnx2x *bp, u8 func, u8 idu_sb_id, bool is_pf)
7737 u32 data, ctl, cnt = 100;
7738 u32 igu_addr_data = IGU_REG_COMMAND_REG_32LSB_DATA;
7739 u32 igu_addr_ctl = IGU_REG_COMMAND_REG_CTRL;
7740 u32 igu_addr_ack = IGU_REG_CSTORM_TYPE_0_SB_CLEANUP + (idu_sb_id/32)*4;
7741 u32 sb_bit = 1 << (idu_sb_id%32);
7742 u32 func_encode = func | (is_pf ? 1 : 0) << IGU_FID_ENCODE_IS_PF_SHIFT;
7743 u32 addr_encode = IGU_CMD_E2_PROD_UPD_BASE + idu_sb_id;
7745 /* Not supported in BC mode */
7746 if (CHIP_INT_MODE_IS_BC(bp))
7749 data = (IGU_USE_REGISTER_cstorm_type_0_sb_cleanup
7750 << IGU_REGULAR_CLEANUP_TYPE_SHIFT) |
7751 IGU_REGULAR_CLEANUP_SET |
7752 IGU_REGULAR_BCLEANUP;
7754 ctl = addr_encode << IGU_CTRL_REG_ADDRESS_SHIFT |
7755 func_encode << IGU_CTRL_REG_FID_SHIFT |
7756 IGU_CTRL_CMD_TYPE_WR << IGU_CTRL_REG_TYPE_SHIFT;
7758 DP(NETIF_MSG_HW, "write 0x%08x to IGU(via GRC) addr 0x%x\n",
7759 data, igu_addr_data);
7760 REG_WR(bp, igu_addr_data, data);
7762 DP(NETIF_MSG_HW, "write 0x%08x to IGU(via GRC) addr 0x%x\n",
7764 REG_WR(bp, igu_addr_ctl, ctl);
7767 /* wait for clean up to finish */
7768 while (!(REG_RD(bp, igu_addr_ack) & sb_bit) && --cnt)
7771 if (!(REG_RD(bp, igu_addr_ack) & sb_bit)) {
7773 "Unable to finish IGU cleanup: idu_sb_id %d offset %d bit %d (cnt %d)\n",
7774 idu_sb_id, idu_sb_id/32, idu_sb_id%32, cnt);
7778 static void bnx2x_igu_clear_sb(struct bnx2x *bp, u8 idu_sb_id)
7780 bnx2x_igu_clear_sb_gen(bp, BP_FUNC(bp), idu_sb_id, true /*PF*/);
7783 static void bnx2x_clear_func_ilt(struct bnx2x *bp, u32 func)
7785 u32 i, base = FUNC_ILT_BASE(func);
7786 for (i = base; i < base + ILT_PER_FUNC; i++)
7787 bnx2x_ilt_wr(bp, i, 0);
7790 static void bnx2x_init_searcher(struct bnx2x *bp)
7792 int port = BP_PORT(bp);
7793 bnx2x_src_init_t2(bp, bp->t2, bp->t2_mapping, SRC_CONN_NUM);
7794 /* T1 hash bits value determines the T1 number of entries */
7795 REG_WR(bp, SRC_REG_NUMBER_HASH_BITS0 + port*4, SRC_HASH_BITS);
7798 static inline int bnx2x_func_switch_update(struct bnx2x *bp, int suspend)
7801 struct bnx2x_func_state_params func_params = {NULL};
7802 struct bnx2x_func_switch_update_params *switch_update_params =
7803 &func_params.params.switch_update;
7805 /* Prepare parameters for function state transitions */
7806 __set_bit(RAMROD_COMP_WAIT, &func_params.ramrod_flags);
7807 __set_bit(RAMROD_RETRY, &func_params.ramrod_flags);
7809 func_params.f_obj = &bp->func_obj;
7810 func_params.cmd = BNX2X_F_CMD_SWITCH_UPDATE;
7812 /* Function parameters */
7813 __set_bit(BNX2X_F_UPDATE_TX_SWITCH_SUSPEND_CHNG,
7814 &switch_update_params->changes);
7816 __set_bit(BNX2X_F_UPDATE_TX_SWITCH_SUSPEND,
7817 &switch_update_params->changes);
7819 rc = bnx2x_func_state_change(bp, &func_params);
7824 static int bnx2x_reset_nic_mode(struct bnx2x *bp)
7826 int rc, i, port = BP_PORT(bp);
7827 int vlan_en = 0, mac_en[NUM_MACS];
7829 /* Close input from network */
7830 if (bp->mf_mode == SINGLE_FUNCTION) {
7831 bnx2x_set_rx_filter(&bp->link_params, 0);
7833 vlan_en = REG_RD(bp, port ? NIG_REG_LLH1_FUNC_EN :
7834 NIG_REG_LLH0_FUNC_EN);
7835 REG_WR(bp, port ? NIG_REG_LLH1_FUNC_EN :
7836 NIG_REG_LLH0_FUNC_EN, 0);
7837 for (i = 0; i < NUM_MACS; i++) {
7838 mac_en[i] = REG_RD(bp, port ?
7839 (NIG_REG_LLH1_FUNC_MEM_ENABLE +
7841 (NIG_REG_LLH0_FUNC_MEM_ENABLE +
7843 REG_WR(bp, port ? (NIG_REG_LLH1_FUNC_MEM_ENABLE +
7845 (NIG_REG_LLH0_FUNC_MEM_ENABLE + 4 * i), 0);
7849 /* Close BMC to host */
7850 REG_WR(bp, port ? NIG_REG_P0_TX_MNG_HOST_ENABLE :
7851 NIG_REG_P1_TX_MNG_HOST_ENABLE, 0);
7853 /* Suspend Tx switching to the PF. Completion of this ramrod
7854 * further guarantees that all the packets of that PF / child
7855 * VFs in BRB were processed by the Parser, so it is safe to
7856 * change the NIC_MODE register.
7858 rc = bnx2x_func_switch_update(bp, 1);
7860 BNX2X_ERR("Can't suspend tx-switching!\n");
7864 /* Change NIC_MODE register */
7865 REG_WR(bp, PRS_REG_NIC_MODE, 0);
7867 /* Open input from network */
7868 if (bp->mf_mode == SINGLE_FUNCTION) {
7869 bnx2x_set_rx_filter(&bp->link_params, 1);
7871 REG_WR(bp, port ? NIG_REG_LLH1_FUNC_EN :
7872 NIG_REG_LLH0_FUNC_EN, vlan_en);
7873 for (i = 0; i < NUM_MACS; i++) {
7874 REG_WR(bp, port ? (NIG_REG_LLH1_FUNC_MEM_ENABLE +
7876 (NIG_REG_LLH0_FUNC_MEM_ENABLE + 4 * i),
7881 /* Enable BMC to host */
7882 REG_WR(bp, port ? NIG_REG_P0_TX_MNG_HOST_ENABLE :
7883 NIG_REG_P1_TX_MNG_HOST_ENABLE, 1);
7885 /* Resume Tx switching to the PF */
7886 rc = bnx2x_func_switch_update(bp, 0);
7888 BNX2X_ERR("Can't resume tx-switching!\n");
7892 DP(NETIF_MSG_IFUP, "NIC MODE disabled\n");
7896 int bnx2x_init_hw_func_cnic(struct bnx2x *bp)
7900 bnx2x_ilt_init_op_cnic(bp, INITOP_SET);
7902 if (CONFIGURE_NIC_MODE(bp)) {
7903 /* Configure searcher as part of function hw init */
7904 bnx2x_init_searcher(bp);
7906 /* Reset NIC mode */
7907 rc = bnx2x_reset_nic_mode(bp);
7909 BNX2X_ERR("Can't change NIC mode!\n");
7916 /* previous driver DMAE transaction may have occurred when pre-boot stage ended
7917 * and boot began, or when kdump kernel was loaded. Either case would invalidate
7918 * the addresses of the transaction, resulting in was-error bit set in the pci
7919 * causing all hw-to-host pcie transactions to timeout. If this happened we want
7920 * to clear the interrupt which detected this from the pglueb and the was done
7923 static void bnx2x_clean_pglue_errors(struct bnx2x *bp)
7925 if (!CHIP_IS_E1x(bp))
7926 REG_WR(bp, PGLUE_B_REG_WAS_ERROR_PF_7_0_CLR,
7927 1 << BP_ABS_FUNC(bp));
7930 static int bnx2x_init_hw_func(struct bnx2x *bp)
7932 int port = BP_PORT(bp);
7933 int func = BP_FUNC(bp);
7934 int init_phase = PHASE_PF0 + func;
7935 struct bnx2x_ilt *ilt = BP_ILT(bp);
7938 u32 main_mem_base, main_mem_size, main_mem_prty_clr;
7939 int i, main_mem_width, rc;
7941 DP(NETIF_MSG_HW, "starting func init func %d\n", func);
7943 /* FLR cleanup - hmmm */
7944 if (!CHIP_IS_E1x(bp)) {
7945 rc = bnx2x_pf_flr_clnup(bp);
7952 /* set MSI reconfigure capability */
7953 if (bp->common.int_block == INT_BLOCK_HC) {
7954 addr = (port ? HC_REG_CONFIG_1 : HC_REG_CONFIG_0);
7955 val = REG_RD(bp, addr);
7956 val |= HC_CONFIG_0_REG_MSI_ATTN_EN_0;
7957 REG_WR(bp, addr, val);
7960 bnx2x_init_block(bp, BLOCK_PXP, init_phase);
7961 bnx2x_init_block(bp, BLOCK_PXP2, init_phase);
7964 cdu_ilt_start = ilt->clients[ILT_CLIENT_CDU].start;
7967 cdu_ilt_start += BNX2X_FIRST_VF_CID/ILT_PAGE_CIDS;
7968 cdu_ilt_start = bnx2x_iov_init_ilt(bp, cdu_ilt_start);
7970 /* since BNX2X_FIRST_VF_CID > 0 the PF L2 cids precedes
7971 * those of the VFs, so start line should be reset
7973 cdu_ilt_start = ilt->clients[ILT_CLIENT_CDU].start;
7974 for (i = 0; i < L2_ILT_LINES(bp); i++) {
7975 ilt->lines[cdu_ilt_start + i].page = bp->context[i].vcxt;
7976 ilt->lines[cdu_ilt_start + i].page_mapping =
7977 bp->context[i].cxt_mapping;
7978 ilt->lines[cdu_ilt_start + i].size = bp->context[i].size;
7981 bnx2x_ilt_init_op(bp, INITOP_SET);
7983 if (!CONFIGURE_NIC_MODE(bp)) {
7984 bnx2x_init_searcher(bp);
7985 REG_WR(bp, PRS_REG_NIC_MODE, 0);
7986 DP(NETIF_MSG_IFUP, "NIC MODE disabled\n");
7989 REG_WR(bp, PRS_REG_NIC_MODE, 1);
7990 DP(NETIF_MSG_IFUP, "NIC MODE configured\n");
7993 if (!CHIP_IS_E1x(bp)) {
7994 u32 pf_conf = IGU_PF_CONF_FUNC_EN;
7996 /* Turn on a single ISR mode in IGU if driver is going to use
7999 if (!(bp->flags & USING_MSIX_FLAG))
8000 pf_conf |= IGU_PF_CONF_SINGLE_ISR_EN;
8002 * Timers workaround bug: function init part.
8003 * Need to wait 20msec after initializing ILT,
8004 * needed to make sure there are no requests in
8005 * one of the PXP internal queues with "old" ILT addresses
8009 * Master enable - Due to WB DMAE writes performed before this
8010 * register is re-initialized as part of the regular function
8013 REG_WR(bp, PGLUE_B_REG_INTERNAL_PFID_ENABLE_MASTER, 1);
8014 /* Enable the function in IGU */
8015 REG_WR(bp, IGU_REG_PF_CONFIGURATION, pf_conf);
8020 bnx2x_init_block(bp, BLOCK_PGLUE_B, init_phase);
8022 bnx2x_clean_pglue_errors(bp);
8024 bnx2x_init_block(bp, BLOCK_ATC, init_phase);
8025 bnx2x_init_block(bp, BLOCK_DMAE, init_phase);
8026 bnx2x_init_block(bp, BLOCK_NIG, init_phase);
8027 bnx2x_init_block(bp, BLOCK_SRC, init_phase);
8028 bnx2x_init_block(bp, BLOCK_MISC, init_phase);
8029 bnx2x_init_block(bp, BLOCK_TCM, init_phase);
8030 bnx2x_init_block(bp, BLOCK_UCM, init_phase);
8031 bnx2x_init_block(bp, BLOCK_CCM, init_phase);
8032 bnx2x_init_block(bp, BLOCK_XCM, init_phase);
8033 bnx2x_init_block(bp, BLOCK_TSEM, init_phase);
8034 bnx2x_init_block(bp, BLOCK_USEM, init_phase);
8035 bnx2x_init_block(bp, BLOCK_CSEM, init_phase);
8036 bnx2x_init_block(bp, BLOCK_XSEM, init_phase);
8038 if (!CHIP_IS_E1x(bp))
8039 REG_WR(bp, QM_REG_PF_EN, 1);
8041 if (!CHIP_IS_E1x(bp)) {
8042 REG_WR(bp, TSEM_REG_VFPF_ERR_NUM, BNX2X_MAX_NUM_OF_VFS + func);
8043 REG_WR(bp, USEM_REG_VFPF_ERR_NUM, BNX2X_MAX_NUM_OF_VFS + func);
8044 REG_WR(bp, CSEM_REG_VFPF_ERR_NUM, BNX2X_MAX_NUM_OF_VFS + func);
8045 REG_WR(bp, XSEM_REG_VFPF_ERR_NUM, BNX2X_MAX_NUM_OF_VFS + func);
8047 bnx2x_init_block(bp, BLOCK_QM, init_phase);
8049 bnx2x_init_block(bp, BLOCK_TM, init_phase);
8050 bnx2x_init_block(bp, BLOCK_DORQ, init_phase);
8051 REG_WR(bp, DORQ_REG_MODE_ACT, 1); /* no dpm */
8053 bnx2x_iov_init_dq(bp);
8055 bnx2x_init_block(bp, BLOCK_BRB1, init_phase);
8056 bnx2x_init_block(bp, BLOCK_PRS, init_phase);
8057 bnx2x_init_block(bp, BLOCK_TSDM, init_phase);
8058 bnx2x_init_block(bp, BLOCK_CSDM, init_phase);
8059 bnx2x_init_block(bp, BLOCK_USDM, init_phase);
8060 bnx2x_init_block(bp, BLOCK_XSDM, init_phase);
8061 bnx2x_init_block(bp, BLOCK_UPB, init_phase);
8062 bnx2x_init_block(bp, BLOCK_XPB, init_phase);
8063 bnx2x_init_block(bp, BLOCK_PBF, init_phase);
8064 if (!CHIP_IS_E1x(bp))
8065 REG_WR(bp, PBF_REG_DISABLE_PF, 0);
8067 bnx2x_init_block(bp, BLOCK_CDU, init_phase);
8069 bnx2x_init_block(bp, BLOCK_CFC, init_phase);
8071 if (!CHIP_IS_E1x(bp))
8072 REG_WR(bp, CFC_REG_WEAK_ENABLE_PF, 1);
8075 if (!(IS_MF_UFP(bp) && BNX2X_IS_MF_SD_PROTOCOL_FCOE(bp))) {
8076 REG_WR(bp, NIG_REG_LLH0_FUNC_EN + port * 8, 1);
8077 REG_WR(bp, NIG_REG_LLH0_FUNC_VLAN_ID + port * 8,
8082 bnx2x_init_block(bp, BLOCK_MISC_AEU, init_phase);
8084 /* HC init per function */
8085 if (bp->common.int_block == INT_BLOCK_HC) {
8086 if (CHIP_IS_E1H(bp)) {
8087 REG_WR(bp, MISC_REG_AEU_GENERAL_ATTN_12 + func*4, 0);
8089 REG_WR(bp, HC_REG_LEADING_EDGE_0 + port*8, 0);
8090 REG_WR(bp, HC_REG_TRAILING_EDGE_0 + port*8, 0);
8092 bnx2x_init_block(bp, BLOCK_HC, init_phase);
8095 int num_segs, sb_idx, prod_offset;
8097 REG_WR(bp, MISC_REG_AEU_GENERAL_ATTN_12 + func*4, 0);
8099 if (!CHIP_IS_E1x(bp)) {
8100 REG_WR(bp, IGU_REG_LEADING_EDGE_LATCH, 0);
8101 REG_WR(bp, IGU_REG_TRAILING_EDGE_LATCH, 0);
8104 bnx2x_init_block(bp, BLOCK_IGU, init_phase);
8106 if (!CHIP_IS_E1x(bp)) {
8110 * E2 mode: address 0-135 match to the mapping memory;
8111 * 136 - PF0 default prod; 137 - PF1 default prod;
8112 * 138 - PF2 default prod; 139 - PF3 default prod;
8113 * 140 - PF0 attn prod; 141 - PF1 attn prod;
8114 * 142 - PF2 attn prod; 143 - PF3 attn prod;
8117 * E1.5 mode - In backward compatible mode;
8118 * for non default SB; each even line in the memory
8119 * holds the U producer and each odd line hold
8120 * the C producer. The first 128 producers are for
8121 * NDSB (PF0 - 0-31; PF1 - 32-63 and so on). The last 20
8122 * producers are for the DSB for each PF.
8123 * Each PF has five segments: (the order inside each
8124 * segment is PF0; PF1; PF2; PF3) - 128-131 U prods;
8125 * 132-135 C prods; 136-139 X prods; 140-143 T prods;
8126 * 144-147 attn prods;
8128 /* non-default-status-blocks */
8129 num_segs = CHIP_INT_MODE_IS_BC(bp) ?
8130 IGU_BC_NDSB_NUM_SEGS : IGU_NORM_NDSB_NUM_SEGS;
8131 for (sb_idx = 0; sb_idx < bp->igu_sb_cnt; sb_idx++) {
8132 prod_offset = (bp->igu_base_sb + sb_idx) *
8135 for (i = 0; i < num_segs; i++) {
8136 addr = IGU_REG_PROD_CONS_MEMORY +
8137 (prod_offset + i) * 4;
8138 REG_WR(bp, addr, 0);
8140 /* send consumer update with value 0 */
8141 bnx2x_ack_sb(bp, bp->igu_base_sb + sb_idx,
8142 USTORM_ID, 0, IGU_INT_NOP, 1);
8143 bnx2x_igu_clear_sb(bp,
8144 bp->igu_base_sb + sb_idx);
8147 /* default-status-blocks */
8148 num_segs = CHIP_INT_MODE_IS_BC(bp) ?
8149 IGU_BC_DSB_NUM_SEGS : IGU_NORM_DSB_NUM_SEGS;
8151 if (CHIP_MODE_IS_4_PORT(bp))
8152 dsb_idx = BP_FUNC(bp);
8154 dsb_idx = BP_VN(bp);
8156 prod_offset = (CHIP_INT_MODE_IS_BC(bp) ?
8157 IGU_BC_BASE_DSB_PROD + dsb_idx :
8158 IGU_NORM_BASE_DSB_PROD + dsb_idx);
8161 * igu prods come in chunks of E1HVN_MAX (4) -
8162 * does not matters what is the current chip mode
8164 for (i = 0; i < (num_segs * E1HVN_MAX);
8166 addr = IGU_REG_PROD_CONS_MEMORY +
8167 (prod_offset + i)*4;
8168 REG_WR(bp, addr, 0);
8170 /* send consumer update with 0 */
8171 if (CHIP_INT_MODE_IS_BC(bp)) {
8172 bnx2x_ack_sb(bp, bp->igu_dsb_id,
8173 USTORM_ID, 0, IGU_INT_NOP, 1);
8174 bnx2x_ack_sb(bp, bp->igu_dsb_id,
8175 CSTORM_ID, 0, IGU_INT_NOP, 1);
8176 bnx2x_ack_sb(bp, bp->igu_dsb_id,
8177 XSTORM_ID, 0, IGU_INT_NOP, 1);
8178 bnx2x_ack_sb(bp, bp->igu_dsb_id,
8179 TSTORM_ID, 0, IGU_INT_NOP, 1);
8180 bnx2x_ack_sb(bp, bp->igu_dsb_id,
8181 ATTENTION_ID, 0, IGU_INT_NOP, 1);
8183 bnx2x_ack_sb(bp, bp->igu_dsb_id,
8184 USTORM_ID, 0, IGU_INT_NOP, 1);
8185 bnx2x_ack_sb(bp, bp->igu_dsb_id,
8186 ATTENTION_ID, 0, IGU_INT_NOP, 1);
8188 bnx2x_igu_clear_sb(bp, bp->igu_dsb_id);
8190 /* !!! These should become driver const once
8191 rf-tool supports split-68 const */
8192 REG_WR(bp, IGU_REG_SB_INT_BEFORE_MASK_LSB, 0);
8193 REG_WR(bp, IGU_REG_SB_INT_BEFORE_MASK_MSB, 0);
8194 REG_WR(bp, IGU_REG_SB_MASK_LSB, 0);
8195 REG_WR(bp, IGU_REG_SB_MASK_MSB, 0);
8196 REG_WR(bp, IGU_REG_PBA_STATUS_LSB, 0);
8197 REG_WR(bp, IGU_REG_PBA_STATUS_MSB, 0);
8201 /* Reset PCIE errors for debug */
8202 REG_WR(bp, 0x2114, 0xffffffff);
8203 REG_WR(bp, 0x2120, 0xffffffff);
8205 if (CHIP_IS_E1x(bp)) {
8206 main_mem_size = HC_REG_MAIN_MEMORY_SIZE / 2; /*dwords*/
8207 main_mem_base = HC_REG_MAIN_MEMORY +
8208 BP_PORT(bp) * (main_mem_size * 4);
8209 main_mem_prty_clr = HC_REG_HC_PRTY_STS_CLR;
8212 val = REG_RD(bp, main_mem_prty_clr);
8215 "Hmmm... Parity errors in HC block during function init (0x%x)!\n",
8218 /* Clear "false" parity errors in MSI-X table */
8219 for (i = main_mem_base;
8220 i < main_mem_base + main_mem_size * 4;
8221 i += main_mem_width) {
8222 bnx2x_read_dmae(bp, i, main_mem_width / 4);
8223 bnx2x_write_dmae(bp, bnx2x_sp_mapping(bp, wb_data),
8224 i, main_mem_width / 4);
8226 /* Clear HC parity attention */
8227 REG_RD(bp, main_mem_prty_clr);
8230 #ifdef BNX2X_STOP_ON_ERROR
8231 /* Enable STORMs SP logging */
8232 REG_WR8(bp, BAR_USTRORM_INTMEM +
8233 USTORM_RECORD_SLOW_PATH_OFFSET(BP_FUNC(bp)), 1);
8234 REG_WR8(bp, BAR_TSTRORM_INTMEM +
8235 TSTORM_RECORD_SLOW_PATH_OFFSET(BP_FUNC(bp)), 1);
8236 REG_WR8(bp, BAR_CSTRORM_INTMEM +
8237 CSTORM_RECORD_SLOW_PATH_OFFSET(BP_FUNC(bp)), 1);
8238 REG_WR8(bp, BAR_XSTRORM_INTMEM +
8239 XSTORM_RECORD_SLOW_PATH_OFFSET(BP_FUNC(bp)), 1);
8242 bnx2x_phy_probe(&bp->link_params);
8247 void bnx2x_free_mem_cnic(struct bnx2x *bp)
8249 bnx2x_ilt_mem_op_cnic(bp, ILT_MEMOP_FREE);
8251 if (!CHIP_IS_E1x(bp))
8252 BNX2X_PCI_FREE(bp->cnic_sb.e2_sb, bp->cnic_sb_mapping,
8253 sizeof(struct host_hc_status_block_e2));
8255 BNX2X_PCI_FREE(bp->cnic_sb.e1x_sb, bp->cnic_sb_mapping,
8256 sizeof(struct host_hc_status_block_e1x));
8258 BNX2X_PCI_FREE(bp->t2, bp->t2_mapping, SRC_T2_SZ);
8261 void bnx2x_free_mem(struct bnx2x *bp)
8265 BNX2X_PCI_FREE(bp->fw_stats, bp->fw_stats_mapping,
8266 bp->fw_stats_data_sz + bp->fw_stats_req_sz);
8271 BNX2X_PCI_FREE(bp->def_status_blk, bp->def_status_blk_mapping,
8272 sizeof(struct host_sp_status_block));
8274 BNX2X_PCI_FREE(bp->slowpath, bp->slowpath_mapping,
8275 sizeof(struct bnx2x_slowpath));
8277 for (i = 0; i < L2_ILT_LINES(bp); i++)
8278 BNX2X_PCI_FREE(bp->context[i].vcxt, bp->context[i].cxt_mapping,
8279 bp->context[i].size);
8280 bnx2x_ilt_mem_op(bp, ILT_MEMOP_FREE);
8282 BNX2X_FREE(bp->ilt->lines);
8284 BNX2X_PCI_FREE(bp->spq, bp->spq_mapping, BCM_PAGE_SIZE);
8286 BNX2X_PCI_FREE(bp->eq_ring, bp->eq_mapping,
8287 BCM_PAGE_SIZE * NUM_EQ_PAGES);
8289 BNX2X_PCI_FREE(bp->t2, bp->t2_mapping, SRC_T2_SZ);
8291 bnx2x_iov_free_mem(bp);
8294 int bnx2x_alloc_mem_cnic(struct bnx2x *bp)
8296 if (!CHIP_IS_E1x(bp)) {
8297 /* size = the status block + ramrod buffers */
8298 bp->cnic_sb.e2_sb = BNX2X_PCI_ALLOC(&bp->cnic_sb_mapping,
8299 sizeof(struct host_hc_status_block_e2));
8300 if (!bp->cnic_sb.e2_sb)
8303 bp->cnic_sb.e1x_sb = BNX2X_PCI_ALLOC(&bp->cnic_sb_mapping,
8304 sizeof(struct host_hc_status_block_e1x));
8305 if (!bp->cnic_sb.e1x_sb)
8309 if (CONFIGURE_NIC_MODE(bp) && !bp->t2) {
8310 /* allocate searcher T2 table, as it wasn't allocated before */
8311 bp->t2 = BNX2X_PCI_ALLOC(&bp->t2_mapping, SRC_T2_SZ);
8316 /* write address to which L5 should insert its values */
8317 bp->cnic_eth_dev.addr_drv_info_to_mcp =
8318 &bp->slowpath->drv_info_to_mcp;
8320 if (bnx2x_ilt_mem_op_cnic(bp, ILT_MEMOP_ALLOC))
8326 bnx2x_free_mem_cnic(bp);
8327 BNX2X_ERR("Can't allocate memory\n");
8331 int bnx2x_alloc_mem(struct bnx2x *bp)
8333 int i, allocated, context_size;
8335 if (!CONFIGURE_NIC_MODE(bp) && !bp->t2) {
8336 /* allocate searcher T2 table */
8337 bp->t2 = BNX2X_PCI_ALLOC(&bp->t2_mapping, SRC_T2_SZ);
8342 bp->def_status_blk = BNX2X_PCI_ALLOC(&bp->def_status_blk_mapping,
8343 sizeof(struct host_sp_status_block));
8344 if (!bp->def_status_blk)
8347 bp->slowpath = BNX2X_PCI_ALLOC(&bp->slowpath_mapping,
8348 sizeof(struct bnx2x_slowpath));
8352 /* Allocate memory for CDU context:
8353 * This memory is allocated separately and not in the generic ILT
8354 * functions because CDU differs in few aspects:
8355 * 1. There are multiple entities allocating memory for context -
8356 * 'regular' driver, CNIC and SRIOV driver. Each separately controls
8357 * its own ILT lines.
8358 * 2. Since CDU page-size is not a single 4KB page (which is the case
8359 * for the other ILT clients), to be efficient we want to support
8360 * allocation of sub-page-size in the last entry.
8361 * 3. Context pointers are used by the driver to pass to FW / update
8362 * the context (for the other ILT clients the pointers are used just to
8363 * free the memory during unload).
8365 context_size = sizeof(union cdu_context) * BNX2X_L2_CID_COUNT(bp);
8367 for (i = 0, allocated = 0; allocated < context_size; i++) {
8368 bp->context[i].size = min(CDU_ILT_PAGE_SZ,
8369 (context_size - allocated));
8370 bp->context[i].vcxt = BNX2X_PCI_ALLOC(&bp->context[i].cxt_mapping,
8371 bp->context[i].size);
8372 if (!bp->context[i].vcxt)
8374 allocated += bp->context[i].size;
8376 bp->ilt->lines = kcalloc(ILT_MAX_LINES, sizeof(struct ilt_line),
8378 if (!bp->ilt->lines)
8381 if (bnx2x_ilt_mem_op(bp, ILT_MEMOP_ALLOC))
8384 if (bnx2x_iov_alloc_mem(bp))
8387 /* Slow path ring */
8388 bp->spq = BNX2X_PCI_ALLOC(&bp->spq_mapping, BCM_PAGE_SIZE);
8393 bp->eq_ring = BNX2X_PCI_ALLOC(&bp->eq_mapping,
8394 BCM_PAGE_SIZE * NUM_EQ_PAGES);
8402 BNX2X_ERR("Can't allocate memory\n");
8407 * Init service functions
8410 int bnx2x_set_mac_one(struct bnx2x *bp, u8 *mac,
8411 struct bnx2x_vlan_mac_obj *obj, bool set,
8412 int mac_type, unsigned long *ramrod_flags)
8415 struct bnx2x_vlan_mac_ramrod_params ramrod_param;
8417 memset(&ramrod_param, 0, sizeof(ramrod_param));
8419 /* Fill general parameters */
8420 ramrod_param.vlan_mac_obj = obj;
8421 ramrod_param.ramrod_flags = *ramrod_flags;
8423 /* Fill a user request section if needed */
8424 if (!test_bit(RAMROD_CONT, ramrod_flags)) {
8425 memcpy(ramrod_param.user_req.u.mac.mac, mac, ETH_ALEN);
8427 __set_bit(mac_type, &ramrod_param.user_req.vlan_mac_flags);
8429 /* Set the command: ADD or DEL */
8431 ramrod_param.user_req.cmd = BNX2X_VLAN_MAC_ADD;
8433 ramrod_param.user_req.cmd = BNX2X_VLAN_MAC_DEL;
8436 rc = bnx2x_config_vlan_mac(bp, &ramrod_param);
8438 if (rc == -EEXIST) {
8439 DP(BNX2X_MSG_SP, "Failed to schedule ADD operations: %d\n", rc);
8440 /* do not treat adding same MAC as error */
8443 BNX2X_ERR("%s MAC failed\n", (set ? "Set" : "Del"));
8448 int bnx2x_set_vlan_one(struct bnx2x *bp, u16 vlan,
8449 struct bnx2x_vlan_mac_obj *obj, bool set,
8450 unsigned long *ramrod_flags)
8453 struct bnx2x_vlan_mac_ramrod_params ramrod_param;
8455 memset(&ramrod_param, 0, sizeof(ramrod_param));
8457 /* Fill general parameters */
8458 ramrod_param.vlan_mac_obj = obj;
8459 ramrod_param.ramrod_flags = *ramrod_flags;
8461 /* Fill a user request section if needed */
8462 if (!test_bit(RAMROD_CONT, ramrod_flags)) {
8463 ramrod_param.user_req.u.vlan.vlan = vlan;
8464 __set_bit(BNX2X_VLAN, &ramrod_param.user_req.vlan_mac_flags);
8465 /* Set the command: ADD or DEL */
8467 ramrod_param.user_req.cmd = BNX2X_VLAN_MAC_ADD;
8469 ramrod_param.user_req.cmd = BNX2X_VLAN_MAC_DEL;
8472 rc = bnx2x_config_vlan_mac(bp, &ramrod_param);
8474 if (rc == -EEXIST) {
8475 /* Do not treat adding same vlan as error. */
8476 DP(BNX2X_MSG_SP, "Failed to schedule ADD operations: %d\n", rc);
8478 } else if (rc < 0) {
8479 BNX2X_ERR("%s VLAN failed\n", (set ? "Set" : "Del"));
8485 static int bnx2x_del_all_vlans(struct bnx2x *bp)
8487 struct bnx2x_vlan_mac_obj *vlan_obj = &bp->sp_objs[0].vlan_obj;
8488 unsigned long ramrod_flags = 0, vlan_flags = 0;
8489 struct bnx2x_vlan_entry *vlan;
8492 __set_bit(RAMROD_COMP_WAIT, &ramrod_flags);
8493 __set_bit(BNX2X_VLAN, &vlan_flags);
8494 rc = vlan_obj->delete_all(bp, vlan_obj, &vlan_flags, &ramrod_flags);
8498 /* Mark that hw forgot all entries */
8499 list_for_each_entry(vlan, &bp->vlan_reg, link)
8506 int bnx2x_del_all_macs(struct bnx2x *bp,
8507 struct bnx2x_vlan_mac_obj *mac_obj,
8508 int mac_type, bool wait_for_comp)
8511 unsigned long ramrod_flags = 0, vlan_mac_flags = 0;
8513 /* Wait for completion of requested */
8515 __set_bit(RAMROD_COMP_WAIT, &ramrod_flags);
8517 /* Set the mac type of addresses we want to clear */
8518 __set_bit(mac_type, &vlan_mac_flags);
8520 rc = mac_obj->delete_all(bp, mac_obj, &vlan_mac_flags, &ramrod_flags);
8522 BNX2X_ERR("Failed to delete MACs: %d\n", rc);
8527 int bnx2x_set_eth_mac(struct bnx2x *bp, bool set)
8530 unsigned long ramrod_flags = 0;
8532 DP(NETIF_MSG_IFUP, "Adding Eth MAC\n");
8533 __set_bit(RAMROD_COMP_WAIT, &ramrod_flags);
8534 return bnx2x_set_mac_one(bp, bp->dev->dev_addr,
8535 &bp->sp_objs->mac_obj, set,
8536 BNX2X_ETH_MAC, &ramrod_flags);
8538 return bnx2x_vfpf_config_mac(bp, bp->dev->dev_addr,
8539 bp->fp->index, set);
8543 int bnx2x_setup_leading(struct bnx2x *bp)
8546 return bnx2x_setup_queue(bp, &bp->fp[0], true);
8548 return bnx2x_vfpf_setup_q(bp, &bp->fp[0], true);
8552 * bnx2x_set_int_mode - configure interrupt mode
8554 * @bp: driver handle
8556 * In case of MSI-X it will also try to enable MSI-X.
8558 int bnx2x_set_int_mode(struct bnx2x *bp)
8562 if (IS_VF(bp) && int_mode != BNX2X_INT_MODE_MSIX) {
8563 BNX2X_ERR("VF not loaded since interrupt mode not msix\n");
8568 case BNX2X_INT_MODE_MSIX:
8569 /* attempt to enable msix */
8570 rc = bnx2x_enable_msix(bp);
8576 /* vfs use only msix */
8577 if (rc && IS_VF(bp))
8580 /* failed to enable multiple MSI-X */
8581 BNX2X_DEV_INFO("Failed to enable multiple MSI-X (%d), set number of queues to %d\n",
8583 1 + bp->num_cnic_queues);
8586 case BNX2X_INT_MODE_MSI:
8587 bnx2x_enable_msi(bp);
8590 case BNX2X_INT_MODE_INTX:
8591 bp->num_ethernet_queues = 1;
8592 bp->num_queues = bp->num_ethernet_queues + bp->num_cnic_queues;
8593 BNX2X_DEV_INFO("set number of queues to 1\n");
8596 BNX2X_DEV_INFO("unknown value in int_mode module parameter\n");
8602 /* must be called prior to any HW initializations */
8603 static inline u16 bnx2x_cid_ilt_lines(struct bnx2x *bp)
8606 return (BNX2X_FIRST_VF_CID + BNX2X_VF_CIDS)/ILT_PAGE_CIDS;
8607 return L2_ILT_LINES(bp);
8610 void bnx2x_ilt_set_info(struct bnx2x *bp)
8612 struct ilt_client_info *ilt_client;
8613 struct bnx2x_ilt *ilt = BP_ILT(bp);
8616 ilt->start_line = FUNC_ILT_BASE(BP_FUNC(bp));
8617 DP(BNX2X_MSG_SP, "ilt starts at line %d\n", ilt->start_line);
8620 ilt_client = &ilt->clients[ILT_CLIENT_CDU];
8621 ilt_client->client_num = ILT_CLIENT_CDU;
8622 ilt_client->page_size = CDU_ILT_PAGE_SZ;
8623 ilt_client->flags = ILT_CLIENT_SKIP_MEM;
8624 ilt_client->start = line;
8625 line += bnx2x_cid_ilt_lines(bp);
8627 if (CNIC_SUPPORT(bp))
8628 line += CNIC_ILT_LINES;
8629 ilt_client->end = line - 1;
8631 DP(NETIF_MSG_IFUP, "ilt client[CDU]: start %d, end %d, psz 0x%x, flags 0x%x, hw psz %d\n",
8634 ilt_client->page_size,
8636 ilog2(ilt_client->page_size >> 12));
8639 if (QM_INIT(bp->qm_cid_count)) {
8640 ilt_client = &ilt->clients[ILT_CLIENT_QM];
8641 ilt_client->client_num = ILT_CLIENT_QM;
8642 ilt_client->page_size = QM_ILT_PAGE_SZ;
8643 ilt_client->flags = 0;
8644 ilt_client->start = line;
8646 /* 4 bytes for each cid */
8647 line += DIV_ROUND_UP(bp->qm_cid_count * QM_QUEUES_PER_FUNC * 4,
8650 ilt_client->end = line - 1;
8653 "ilt client[QM]: start %d, end %d, psz 0x%x, flags 0x%x, hw psz %d\n",
8656 ilt_client->page_size,
8658 ilog2(ilt_client->page_size >> 12));
8661 if (CNIC_SUPPORT(bp)) {
8663 ilt_client = &ilt->clients[ILT_CLIENT_SRC];
8664 ilt_client->client_num = ILT_CLIENT_SRC;
8665 ilt_client->page_size = SRC_ILT_PAGE_SZ;
8666 ilt_client->flags = 0;
8667 ilt_client->start = line;
8668 line += SRC_ILT_LINES;
8669 ilt_client->end = line - 1;
8672 "ilt client[SRC]: start %d, end %d, psz 0x%x, flags 0x%x, hw psz %d\n",
8675 ilt_client->page_size,
8677 ilog2(ilt_client->page_size >> 12));
8680 ilt_client = &ilt->clients[ILT_CLIENT_TM];
8681 ilt_client->client_num = ILT_CLIENT_TM;
8682 ilt_client->page_size = TM_ILT_PAGE_SZ;
8683 ilt_client->flags = 0;
8684 ilt_client->start = line;
8685 line += TM_ILT_LINES;
8686 ilt_client->end = line - 1;
8689 "ilt client[TM]: start %d, end %d, psz 0x%x, flags 0x%x, hw psz %d\n",
8692 ilt_client->page_size,
8694 ilog2(ilt_client->page_size >> 12));
8697 BUG_ON(line > ILT_MAX_LINES);
8701 * bnx2x_pf_q_prep_init - prepare INIT transition parameters
8703 * @bp: driver handle
8704 * @fp: pointer to fastpath
8705 * @init_params: pointer to parameters structure
8707 * parameters configured:
8708 * - HC configuration
8709 * - Queue's CDU context
8711 static void bnx2x_pf_q_prep_init(struct bnx2x *bp,
8712 struct bnx2x_fastpath *fp, struct bnx2x_queue_init_params *init_params)
8715 int cxt_index, cxt_offset;
8717 /* FCoE Queue uses Default SB, thus has no HC capabilities */
8718 if (!IS_FCOE_FP(fp)) {
8719 __set_bit(BNX2X_Q_FLG_HC, &init_params->rx.flags);
8720 __set_bit(BNX2X_Q_FLG_HC, &init_params->tx.flags);
8722 /* If HC is supported, enable host coalescing in the transition
8725 __set_bit(BNX2X_Q_FLG_HC_EN, &init_params->rx.flags);
8726 __set_bit(BNX2X_Q_FLG_HC_EN, &init_params->tx.flags);
8729 init_params->rx.hc_rate = bp->rx_ticks ?
8730 (1000000 / bp->rx_ticks) : 0;
8731 init_params->tx.hc_rate = bp->tx_ticks ?
8732 (1000000 / bp->tx_ticks) : 0;
8735 init_params->rx.fw_sb_id = init_params->tx.fw_sb_id =
8739 * CQ index among the SB indices: FCoE clients uses the default
8740 * SB, therefore it's different.
8742 init_params->rx.sb_cq_index = HC_INDEX_ETH_RX_CQ_CONS;
8743 init_params->tx.sb_cq_index = HC_INDEX_ETH_FIRST_TX_CQ_CONS;
8746 /* set maximum number of COSs supported by this queue */
8747 init_params->max_cos = fp->max_cos;
8749 DP(NETIF_MSG_IFUP, "fp: %d setting queue params max cos to: %d\n",
8750 fp->index, init_params->max_cos);
8752 /* set the context pointers queue object */
8753 for (cos = FIRST_TX_COS_INDEX; cos < init_params->max_cos; cos++) {
8754 cxt_index = fp->txdata_ptr[cos]->cid / ILT_PAGE_CIDS;
8755 cxt_offset = fp->txdata_ptr[cos]->cid - (cxt_index *
8757 init_params->cxts[cos] =
8758 &bp->context[cxt_index].vcxt[cxt_offset].eth;
8762 static int bnx2x_setup_tx_only(struct bnx2x *bp, struct bnx2x_fastpath *fp,
8763 struct bnx2x_queue_state_params *q_params,
8764 struct bnx2x_queue_setup_tx_only_params *tx_only_params,
8765 int tx_index, bool leading)
8767 memset(tx_only_params, 0, sizeof(*tx_only_params));
8769 /* Set the command */
8770 q_params->cmd = BNX2X_Q_CMD_SETUP_TX_ONLY;
8772 /* Set tx-only QUEUE flags: don't zero statistics */
8773 tx_only_params->flags = bnx2x_get_common_flags(bp, fp, false);
8775 /* choose the index of the cid to send the slow path on */
8776 tx_only_params->cid_index = tx_index;
8778 /* Set general TX_ONLY_SETUP parameters */
8779 bnx2x_pf_q_prep_general(bp, fp, &tx_only_params->gen_params, tx_index);
8781 /* Set Tx TX_ONLY_SETUP parameters */
8782 bnx2x_pf_tx_q_prep(bp, fp, &tx_only_params->txq_params, tx_index);
8785 "preparing to send tx-only ramrod for connection: cos %d, primary cid %d, cid %d, client id %d, sp-client id %d, flags %lx\n",
8786 tx_index, q_params->q_obj->cids[FIRST_TX_COS_INDEX],
8787 q_params->q_obj->cids[tx_index], q_params->q_obj->cl_id,
8788 tx_only_params->gen_params.spcl_id, tx_only_params->flags);
8790 /* send the ramrod */
8791 return bnx2x_queue_state_change(bp, q_params);
8795 * bnx2x_setup_queue - setup queue
8797 * @bp: driver handle
8798 * @fp: pointer to fastpath
8799 * @leading: is leading
8801 * This function performs 2 steps in a Queue state machine
8802 * actually: 1) RESET->INIT 2) INIT->SETUP
8805 int bnx2x_setup_queue(struct bnx2x *bp, struct bnx2x_fastpath *fp,
8808 struct bnx2x_queue_state_params q_params = {NULL};
8809 struct bnx2x_queue_setup_params *setup_params =
8810 &q_params.params.setup;
8811 struct bnx2x_queue_setup_tx_only_params *tx_only_params =
8812 &q_params.params.tx_only;
8816 DP(NETIF_MSG_IFUP, "setting up queue %d\n", fp->index);
8818 /* reset IGU state skip FCoE L2 queue */
8819 if (!IS_FCOE_FP(fp))
8820 bnx2x_ack_sb(bp, fp->igu_sb_id, USTORM_ID, 0,
8823 q_params.q_obj = &bnx2x_sp_obj(bp, fp).q_obj;
8824 /* We want to wait for completion in this context */
8825 __set_bit(RAMROD_COMP_WAIT, &q_params.ramrod_flags);
8827 /* Prepare the INIT parameters */
8828 bnx2x_pf_q_prep_init(bp, fp, &q_params.params.init);
8830 /* Set the command */
8831 q_params.cmd = BNX2X_Q_CMD_INIT;
8833 /* Change the state to INIT */
8834 rc = bnx2x_queue_state_change(bp, &q_params);
8836 BNX2X_ERR("Queue(%d) INIT failed\n", fp->index);
8840 DP(NETIF_MSG_IFUP, "init complete\n");
8842 /* Now move the Queue to the SETUP state... */
8843 memset(setup_params, 0, sizeof(*setup_params));
8845 /* Set QUEUE flags */
8846 setup_params->flags = bnx2x_get_q_flags(bp, fp, leading);
8848 /* Set general SETUP parameters */
8849 bnx2x_pf_q_prep_general(bp, fp, &setup_params->gen_params,
8850 FIRST_TX_COS_INDEX);
8852 bnx2x_pf_rx_q_prep(bp, fp, &setup_params->pause_params,
8853 &setup_params->rxq_params);
8855 bnx2x_pf_tx_q_prep(bp, fp, &setup_params->txq_params,
8856 FIRST_TX_COS_INDEX);
8858 /* Set the command */
8859 q_params.cmd = BNX2X_Q_CMD_SETUP;
8862 bp->fcoe_init = true;
8864 /* Change the state to SETUP */
8865 rc = bnx2x_queue_state_change(bp, &q_params);
8867 BNX2X_ERR("Queue(%d) SETUP failed\n", fp->index);
8871 /* loop through the relevant tx-only indices */
8872 for (tx_index = FIRST_TX_ONLY_COS_INDEX;
8873 tx_index < fp->max_cos;
8876 /* prepare and send tx-only ramrod*/
8877 rc = bnx2x_setup_tx_only(bp, fp, &q_params,
8878 tx_only_params, tx_index, leading);
8880 BNX2X_ERR("Queue(%d.%d) TX_ONLY_SETUP failed\n",
8881 fp->index, tx_index);
8889 static int bnx2x_stop_queue(struct bnx2x *bp, int index)
8891 struct bnx2x_fastpath *fp = &bp->fp[index];
8892 struct bnx2x_fp_txdata *txdata;
8893 struct bnx2x_queue_state_params q_params = {NULL};
8896 DP(NETIF_MSG_IFDOWN, "stopping queue %d cid %d\n", index, fp->cid);
8898 q_params.q_obj = &bnx2x_sp_obj(bp, fp).q_obj;
8899 /* We want to wait for completion in this context */
8900 __set_bit(RAMROD_COMP_WAIT, &q_params.ramrod_flags);
8902 /* close tx-only connections */
8903 for (tx_index = FIRST_TX_ONLY_COS_INDEX;
8904 tx_index < fp->max_cos;
8907 /* ascertain this is a normal queue*/
8908 txdata = fp->txdata_ptr[tx_index];
8910 DP(NETIF_MSG_IFDOWN, "stopping tx-only queue %d\n",
8913 /* send halt terminate on tx-only connection */
8914 q_params.cmd = BNX2X_Q_CMD_TERMINATE;
8915 memset(&q_params.params.terminate, 0,
8916 sizeof(q_params.params.terminate));
8917 q_params.params.terminate.cid_index = tx_index;
8919 rc = bnx2x_queue_state_change(bp, &q_params);
8923 /* send halt terminate on tx-only connection */
8924 q_params.cmd = BNX2X_Q_CMD_CFC_DEL;
8925 memset(&q_params.params.cfc_del, 0,
8926 sizeof(q_params.params.cfc_del));
8927 q_params.params.cfc_del.cid_index = tx_index;
8928 rc = bnx2x_queue_state_change(bp, &q_params);
8932 /* Stop the primary connection: */
8933 /* ...halt the connection */
8934 q_params.cmd = BNX2X_Q_CMD_HALT;
8935 rc = bnx2x_queue_state_change(bp, &q_params);
8939 /* ...terminate the connection */
8940 q_params.cmd = BNX2X_Q_CMD_TERMINATE;
8941 memset(&q_params.params.terminate, 0,
8942 sizeof(q_params.params.terminate));
8943 q_params.params.terminate.cid_index = FIRST_TX_COS_INDEX;
8944 rc = bnx2x_queue_state_change(bp, &q_params);
8947 /* ...delete cfc entry */
8948 q_params.cmd = BNX2X_Q_CMD_CFC_DEL;
8949 memset(&q_params.params.cfc_del, 0,
8950 sizeof(q_params.params.cfc_del));
8951 q_params.params.cfc_del.cid_index = FIRST_TX_COS_INDEX;
8952 return bnx2x_queue_state_change(bp, &q_params);
8955 static void bnx2x_reset_func(struct bnx2x *bp)
8957 int port = BP_PORT(bp);
8958 int func = BP_FUNC(bp);
8961 /* Disable the function in the FW */
8962 REG_WR8(bp, BAR_XSTRORM_INTMEM + XSTORM_FUNC_EN_OFFSET(func), 0);
8963 REG_WR8(bp, BAR_CSTRORM_INTMEM + CSTORM_FUNC_EN_OFFSET(func), 0);
8964 REG_WR8(bp, BAR_TSTRORM_INTMEM + TSTORM_FUNC_EN_OFFSET(func), 0);
8965 REG_WR8(bp, BAR_USTRORM_INTMEM + USTORM_FUNC_EN_OFFSET(func), 0);
8968 for_each_eth_queue(bp, i) {
8969 struct bnx2x_fastpath *fp = &bp->fp[i];
8970 REG_WR8(bp, BAR_CSTRORM_INTMEM +
8971 CSTORM_STATUS_BLOCK_DATA_STATE_OFFSET(fp->fw_sb_id),
8975 if (CNIC_LOADED(bp))
8977 REG_WR8(bp, BAR_CSTRORM_INTMEM +
8978 CSTORM_STATUS_BLOCK_DATA_STATE_OFFSET
8979 (bnx2x_cnic_fw_sb_id(bp)), SB_DISABLED);
8982 REG_WR8(bp, BAR_CSTRORM_INTMEM +
8983 CSTORM_SP_STATUS_BLOCK_DATA_STATE_OFFSET(func),
8986 for (i = 0; i < XSTORM_SPQ_DATA_SIZE / 4; i++)
8987 REG_WR(bp, BAR_XSTRORM_INTMEM + XSTORM_SPQ_DATA_OFFSET(func),
8991 if (bp->common.int_block == INT_BLOCK_HC) {
8992 REG_WR(bp, HC_REG_LEADING_EDGE_0 + port*8, 0);
8993 REG_WR(bp, HC_REG_TRAILING_EDGE_0 + port*8, 0);
8995 REG_WR(bp, IGU_REG_LEADING_EDGE_LATCH, 0);
8996 REG_WR(bp, IGU_REG_TRAILING_EDGE_LATCH, 0);
8999 if (CNIC_LOADED(bp)) {
9000 /* Disable Timer scan */
9001 REG_WR(bp, TM_REG_EN_LINEAR0_TIMER + port*4, 0);
9003 * Wait for at least 10ms and up to 2 second for the timers
9006 for (i = 0; i < 200; i++) {
9007 usleep_range(10000, 20000);
9008 if (!REG_RD(bp, TM_REG_LIN0_SCAN_ON + port*4))
9013 bnx2x_clear_func_ilt(bp, func);
9015 /* Timers workaround bug for E2: if this is vnic-3,
9016 * we need to set the entire ilt range for this timers.
9018 if (!CHIP_IS_E1x(bp) && BP_VN(bp) == 3) {
9019 struct ilt_client_info ilt_cli;
9020 /* use dummy TM client */
9021 memset(&ilt_cli, 0, sizeof(struct ilt_client_info));
9023 ilt_cli.end = ILT_NUM_PAGE_ENTRIES - 1;
9024 ilt_cli.client_num = ILT_CLIENT_TM;
9026 bnx2x_ilt_boundry_init_op(bp, &ilt_cli, 0, INITOP_CLEAR);
9029 /* this assumes that reset_port() called before reset_func()*/
9030 if (!CHIP_IS_E1x(bp))
9031 bnx2x_pf_disable(bp);
9036 static void bnx2x_reset_port(struct bnx2x *bp)
9038 int port = BP_PORT(bp);
9041 /* Reset physical Link */
9042 bnx2x__link_reset(bp);
9044 REG_WR(bp, NIG_REG_MASK_INTERRUPT_PORT0 + port*4, 0);
9046 /* Do not rcv packets to BRB */
9047 REG_WR(bp, NIG_REG_LLH0_BRB1_DRV_MASK + port*4, 0x0);
9048 /* Do not direct rcv packets that are not for MCP to the BRB */
9049 REG_WR(bp, (port ? NIG_REG_LLH1_BRB1_NOT_MCP :
9050 NIG_REG_LLH0_BRB1_NOT_MCP), 0x0);
9053 REG_WR(bp, MISC_REG_AEU_MASK_ATTN_FUNC_0 + port*4, 0);
9056 /* Check for BRB port occupancy */
9057 val = REG_RD(bp, BRB1_REG_PORT_NUM_OCC_BLOCKS_0 + port*4);
9059 DP(NETIF_MSG_IFDOWN,
9060 "BRB1 is not empty %d blocks are occupied\n", val);
9062 /* TODO: Close Doorbell port? */
9065 static int bnx2x_reset_hw(struct bnx2x *bp, u32 load_code)
9067 struct bnx2x_func_state_params func_params = {NULL};
9069 /* Prepare parameters for function state transitions */
9070 __set_bit(RAMROD_COMP_WAIT, &func_params.ramrod_flags);
9072 func_params.f_obj = &bp->func_obj;
9073 func_params.cmd = BNX2X_F_CMD_HW_RESET;
9075 func_params.params.hw_init.load_phase = load_code;
9077 return bnx2x_func_state_change(bp, &func_params);
9080 static int bnx2x_func_stop(struct bnx2x *bp)
9082 struct bnx2x_func_state_params func_params = {NULL};
9085 /* Prepare parameters for function state transitions */
9086 __set_bit(RAMROD_COMP_WAIT, &func_params.ramrod_flags);
9087 func_params.f_obj = &bp->func_obj;
9088 func_params.cmd = BNX2X_F_CMD_STOP;
9091 * Try to stop the function the 'good way'. If fails (in case
9092 * of a parity error during bnx2x_chip_cleanup()) and we are
9093 * not in a debug mode, perform a state transaction in order to
9094 * enable further HW_RESET transaction.
9096 rc = bnx2x_func_state_change(bp, &func_params);
9098 #ifdef BNX2X_STOP_ON_ERROR
9101 BNX2X_ERR("FUNC_STOP ramrod failed. Running a dry transaction\n");
9102 __set_bit(RAMROD_DRV_CLR_ONLY, &func_params.ramrod_flags);
9103 return bnx2x_func_state_change(bp, &func_params);
9111 * bnx2x_send_unload_req - request unload mode from the MCP.
9113 * @bp: driver handle
9114 * @unload_mode: requested function's unload mode
9116 * Return unload mode returned by the MCP: COMMON, PORT or FUNC.
9118 u32 bnx2x_send_unload_req(struct bnx2x *bp, int unload_mode)
9121 int port = BP_PORT(bp);
9123 /* Select the UNLOAD request mode */
9124 if (unload_mode == UNLOAD_NORMAL)
9125 reset_code = DRV_MSG_CODE_UNLOAD_REQ_WOL_DIS;
9127 else if (bp->flags & NO_WOL_FLAG)
9128 reset_code = DRV_MSG_CODE_UNLOAD_REQ_WOL_MCP;
9131 u32 emac_base = port ? GRCBASE_EMAC1 : GRCBASE_EMAC0;
9132 u8 *mac_addr = bp->dev->dev_addr;
9133 struct pci_dev *pdev = bp->pdev;
9137 /* The mac address is written to entries 1-4 to
9138 * preserve entry 0 which is used by the PMF
9140 u8 entry = (BP_VN(bp) + 1)*8;
9142 val = (mac_addr[0] << 8) | mac_addr[1];
9143 EMAC_WR(bp, EMAC_REG_EMAC_MAC_MATCH + entry, val);
9145 val = (mac_addr[2] << 24) | (mac_addr[3] << 16) |
9146 (mac_addr[4] << 8) | mac_addr[5];
9147 EMAC_WR(bp, EMAC_REG_EMAC_MAC_MATCH + entry + 4, val);
9149 /* Enable the PME and clear the status */
9150 pci_read_config_word(pdev, pdev->pm_cap + PCI_PM_CTRL, &pmc);
9151 pmc |= PCI_PM_CTRL_PME_ENABLE | PCI_PM_CTRL_PME_STATUS;
9152 pci_write_config_word(pdev, pdev->pm_cap + PCI_PM_CTRL, pmc);
9154 reset_code = DRV_MSG_CODE_UNLOAD_REQ_WOL_EN;
9157 reset_code = DRV_MSG_CODE_UNLOAD_REQ_WOL_DIS;
9159 /* Send the request to the MCP */
9161 reset_code = bnx2x_fw_command(bp, reset_code, 0);
9163 int path = BP_PATH(bp);
9165 DP(NETIF_MSG_IFDOWN, "NO MCP - load counts[%d] %d, %d, %d\n",
9166 path, bnx2x_load_count[path][0], bnx2x_load_count[path][1],
9167 bnx2x_load_count[path][2]);
9168 bnx2x_load_count[path][0]--;
9169 bnx2x_load_count[path][1 + port]--;
9170 DP(NETIF_MSG_IFDOWN, "NO MCP - new load counts[%d] %d, %d, %d\n",
9171 path, bnx2x_load_count[path][0], bnx2x_load_count[path][1],
9172 bnx2x_load_count[path][2]);
9173 if (bnx2x_load_count[path][0] == 0)
9174 reset_code = FW_MSG_CODE_DRV_UNLOAD_COMMON;
9175 else if (bnx2x_load_count[path][1 + port] == 0)
9176 reset_code = FW_MSG_CODE_DRV_UNLOAD_PORT;
9178 reset_code = FW_MSG_CODE_DRV_UNLOAD_FUNCTION;
9185 * bnx2x_send_unload_done - send UNLOAD_DONE command to the MCP.
9187 * @bp: driver handle
9188 * @keep_link: true iff link should be kept up
9190 void bnx2x_send_unload_done(struct bnx2x *bp, bool keep_link)
9192 u32 reset_param = keep_link ? DRV_MSG_CODE_UNLOAD_SKIP_LINK_RESET : 0;
9194 /* Report UNLOAD_DONE to MCP */
9196 bnx2x_fw_command(bp, DRV_MSG_CODE_UNLOAD_DONE, reset_param);
9199 static int bnx2x_func_wait_started(struct bnx2x *bp)
9202 int msix = (bp->flags & USING_MSIX_FLAG) ? 1 : 0;
9208 * (assumption: No Attention from MCP at this stage)
9209 * PMF probably in the middle of TX disable/enable transaction
9210 * 1. Sync IRS for default SB
9211 * 2. Sync SP queue - this guarantees us that attention handling started
9212 * 3. Wait, that TX disable/enable transaction completes
9214 * 1+2 guarantee that if DCBx attention was scheduled it already changed
9215 * pending bit of transaction from STARTED-->TX_STOPPED, if we already
9216 * received completion for the transaction the state is TX_STOPPED.
9217 * State will return to STARTED after completion of TX_STOPPED-->STARTED
9221 /* make sure default SB ISR is done */
9223 synchronize_irq(bp->msix_table[0].vector);
9225 synchronize_irq(bp->pdev->irq);
9227 flush_workqueue(bnx2x_wq);
9228 flush_workqueue(bnx2x_iov_wq);
9230 while (bnx2x_func_get_state(bp, &bp->func_obj) !=
9231 BNX2X_F_STATE_STARTED && tout--)
9234 if (bnx2x_func_get_state(bp, &bp->func_obj) !=
9235 BNX2X_F_STATE_STARTED) {
9236 #ifdef BNX2X_STOP_ON_ERROR
9237 BNX2X_ERR("Wrong function state\n");
9241 * Failed to complete the transaction in a "good way"
9242 * Force both transactions with CLR bit
9244 struct bnx2x_func_state_params func_params = {NULL};
9246 DP(NETIF_MSG_IFDOWN,
9247 "Hmmm... Unexpected function state! Forcing STARTED-->TX_STOPPED-->STARTED\n");
9249 func_params.f_obj = &bp->func_obj;
9250 __set_bit(RAMROD_DRV_CLR_ONLY,
9251 &func_params.ramrod_flags);
9253 /* STARTED-->TX_ST0PPED */
9254 func_params.cmd = BNX2X_F_CMD_TX_STOP;
9255 bnx2x_func_state_change(bp, &func_params);
9257 /* TX_ST0PPED-->STARTED */
9258 func_params.cmd = BNX2X_F_CMD_TX_START;
9259 return bnx2x_func_state_change(bp, &func_params);
9266 static void bnx2x_disable_ptp(struct bnx2x *bp)
9268 int port = BP_PORT(bp);
9270 /* Disable sending PTP packets to host */
9271 REG_WR(bp, port ? NIG_REG_P1_LLH_PTP_TO_HOST :
9272 NIG_REG_P0_LLH_PTP_TO_HOST, 0x0);
9274 /* Reset PTP event detection rules */
9275 REG_WR(bp, port ? NIG_REG_P1_LLH_PTP_PARAM_MASK :
9276 NIG_REG_P0_LLH_PTP_PARAM_MASK, 0x7FF);
9277 REG_WR(bp, port ? NIG_REG_P1_LLH_PTP_RULE_MASK :
9278 NIG_REG_P0_LLH_PTP_RULE_MASK, 0x3FFF);
9279 REG_WR(bp, port ? NIG_REG_P1_TLLH_PTP_PARAM_MASK :
9280 NIG_REG_P0_TLLH_PTP_PARAM_MASK, 0x7FF);
9281 REG_WR(bp, port ? NIG_REG_P1_TLLH_PTP_RULE_MASK :
9282 NIG_REG_P0_TLLH_PTP_RULE_MASK, 0x3FFF);
9284 /* Disable the PTP feature */
9285 REG_WR(bp, port ? NIG_REG_P1_PTP_EN :
9286 NIG_REG_P0_PTP_EN, 0x0);
9289 /* Called during unload, to stop PTP-related stuff */
9290 static void bnx2x_stop_ptp(struct bnx2x *bp)
9292 /* Cancel PTP work queue. Should be done after the Tx queues are
9293 * drained to prevent additional scheduling.
9295 cancel_work_sync(&bp->ptp_task);
9297 if (bp->ptp_tx_skb) {
9298 dev_kfree_skb_any(bp->ptp_tx_skb);
9299 bp->ptp_tx_skb = NULL;
9302 /* Disable PTP in HW */
9303 bnx2x_disable_ptp(bp);
9305 DP(BNX2X_MSG_PTP, "PTP stop ended successfully\n");
9308 void bnx2x_chip_cleanup(struct bnx2x *bp, int unload_mode, bool keep_link)
9310 int port = BP_PORT(bp);
9313 struct bnx2x_mcast_ramrod_params rparam = {NULL};
9316 /* Wait until tx fastpath tasks complete */
9317 for_each_tx_queue(bp, i) {
9318 struct bnx2x_fastpath *fp = &bp->fp[i];
9320 for_each_cos_in_tx_queue(fp, cos)
9321 rc = bnx2x_clean_tx_queue(bp, fp->txdata_ptr[cos]);
9322 #ifdef BNX2X_STOP_ON_ERROR
9328 /* Give HW time to discard old tx messages */
9329 usleep_range(1000, 2000);
9331 /* Clean all ETH MACs */
9332 rc = bnx2x_del_all_macs(bp, &bp->sp_objs[0].mac_obj, BNX2X_ETH_MAC,
9335 BNX2X_ERR("Failed to delete all ETH macs: %d\n", rc);
9337 /* Clean up UC list */
9338 rc = bnx2x_del_all_macs(bp, &bp->sp_objs[0].mac_obj, BNX2X_UC_LIST_MAC,
9341 BNX2X_ERR("Failed to schedule DEL commands for UC MACs list: %d\n",
9344 /* The whole *vlan_obj structure may be not initialized if VLAN
9345 * filtering offload is not supported by hardware. Currently this is
9346 * true for all hardware covered by CHIP_IS_E1x().
9348 if (!CHIP_IS_E1x(bp)) {
9349 /* Remove all currently configured VLANs */
9350 rc = bnx2x_del_all_vlans(bp);
9352 BNX2X_ERR("Failed to delete all VLANs\n");
9356 if (!CHIP_IS_E1(bp))
9357 REG_WR(bp, NIG_REG_LLH0_FUNC_EN + port*8, 0);
9359 /* Set "drop all" (stop Rx).
9360 * We need to take a netif_addr_lock() here in order to prevent
9361 * a race between the completion code and this code.
9363 netif_addr_lock_bh(bp->dev);
9364 /* Schedule the rx_mode command */
9365 if (test_bit(BNX2X_FILTER_RX_MODE_PENDING, &bp->sp_state))
9366 set_bit(BNX2X_FILTER_RX_MODE_SCHED, &bp->sp_state);
9367 else if (bp->slowpath)
9368 bnx2x_set_storm_rx_mode(bp);
9370 /* Cleanup multicast configuration */
9371 rparam.mcast_obj = &bp->mcast_obj;
9372 rc = bnx2x_config_mcast(bp, &rparam, BNX2X_MCAST_CMD_DEL);
9374 BNX2X_ERR("Failed to send DEL multicast command: %d\n", rc);
9376 netif_addr_unlock_bh(bp->dev);
9378 bnx2x_iov_chip_cleanup(bp);
9381 * Send the UNLOAD_REQUEST to the MCP. This will return if
9382 * this function should perform FUNC, PORT or COMMON HW
9385 reset_code = bnx2x_send_unload_req(bp, unload_mode);
9388 * (assumption: No Attention from MCP at this stage)
9389 * PMF probably in the middle of TX disable/enable transaction
9391 rc = bnx2x_func_wait_started(bp);
9393 BNX2X_ERR("bnx2x_func_wait_started failed\n");
9394 #ifdef BNX2X_STOP_ON_ERROR
9399 /* Close multi and leading connections
9400 * Completions for ramrods are collected in a synchronous way
9402 for_each_eth_queue(bp, i)
9403 if (bnx2x_stop_queue(bp, i))
9404 #ifdef BNX2X_STOP_ON_ERROR
9410 if (CNIC_LOADED(bp)) {
9411 for_each_cnic_queue(bp, i)
9412 if (bnx2x_stop_queue(bp, i))
9413 #ifdef BNX2X_STOP_ON_ERROR
9420 /* If SP settings didn't get completed so far - something
9421 * very wrong has happen.
9423 if (!bnx2x_wait_sp_comp(bp, ~0x0UL))
9424 BNX2X_ERR("Hmmm... Common slow path ramrods got stuck!\n");
9426 #ifndef BNX2X_STOP_ON_ERROR
9429 rc = bnx2x_func_stop(bp);
9431 BNX2X_ERR("Function stop failed!\n");
9432 #ifdef BNX2X_STOP_ON_ERROR
9437 /* stop_ptp should be after the Tx queues are drained to prevent
9438 * scheduling to the cancelled PTP work queue. It should also be after
9439 * function stop ramrod is sent, since as part of this ramrod FW access
9442 if (bp->flags & PTP_SUPPORTED) {
9444 if (bp->ptp_clock) {
9445 ptp_clock_unregister(bp->ptp_clock);
9446 bp->ptp_clock = NULL;
9450 /* Disable HW interrupts, NAPI */
9451 bnx2x_netif_stop(bp, 1);
9452 /* Delete all NAPI objects */
9453 bnx2x_del_all_napi(bp);
9454 if (CNIC_LOADED(bp))
9455 bnx2x_del_all_napi_cnic(bp);
9460 /* Reset the chip, unless PCI function is offline. If we reach this
9461 * point following a PCI error handling, it means device is really
9462 * in a bad state and we're about to remove it, so reset the chip
9463 * is not a good idea.
9465 if (!pci_channel_offline(bp->pdev)) {
9466 rc = bnx2x_reset_hw(bp, reset_code);
9468 BNX2X_ERR("HW_RESET failed\n");
9471 /* Report UNLOAD_DONE to MCP */
9472 bnx2x_send_unload_done(bp, keep_link);
9475 void bnx2x_disable_close_the_gate(struct bnx2x *bp)
9479 DP(NETIF_MSG_IFDOWN, "Disabling \"close the gates\"\n");
9481 if (CHIP_IS_E1(bp)) {
9482 int port = BP_PORT(bp);
9483 u32 addr = port ? MISC_REG_AEU_MASK_ATTN_FUNC_1 :
9484 MISC_REG_AEU_MASK_ATTN_FUNC_0;
9486 val = REG_RD(bp, addr);
9488 REG_WR(bp, addr, val);
9490 val = REG_RD(bp, MISC_REG_AEU_GENERAL_MASK);
9491 val &= ~(MISC_AEU_GENERAL_MASK_REG_AEU_PXP_CLOSE_MASK |
9492 MISC_AEU_GENERAL_MASK_REG_AEU_NIG_CLOSE_MASK);
9493 REG_WR(bp, MISC_REG_AEU_GENERAL_MASK, val);
9497 /* Close gates #2, #3 and #4: */
9498 static void bnx2x_set_234_gates(struct bnx2x *bp, bool close)
9502 /* Gates #2 and #4a are closed/opened for "not E1" only */
9503 if (!CHIP_IS_E1(bp)) {
9505 REG_WR(bp, PXP_REG_HST_DISCARD_DOORBELLS, !!close);
9507 REG_WR(bp, PXP_REG_HST_DISCARD_INTERNAL_WRITES, !!close);
9511 if (CHIP_IS_E1x(bp)) {
9512 /* Prevent interrupts from HC on both ports */
9513 val = REG_RD(bp, HC_REG_CONFIG_1);
9514 REG_WR(bp, HC_REG_CONFIG_1,
9515 (!close) ? (val | HC_CONFIG_1_REG_BLOCK_DISABLE_1) :
9516 (val & ~(u32)HC_CONFIG_1_REG_BLOCK_DISABLE_1));
9518 val = REG_RD(bp, HC_REG_CONFIG_0);
9519 REG_WR(bp, HC_REG_CONFIG_0,
9520 (!close) ? (val | HC_CONFIG_0_REG_BLOCK_DISABLE_0) :
9521 (val & ~(u32)HC_CONFIG_0_REG_BLOCK_DISABLE_0));
9523 /* Prevent incoming interrupts in IGU */
9524 val = REG_RD(bp, IGU_REG_BLOCK_CONFIGURATION);
9526 REG_WR(bp, IGU_REG_BLOCK_CONFIGURATION,
9528 (val | IGU_BLOCK_CONFIGURATION_REG_BLOCK_ENABLE) :
9529 (val & ~(u32)IGU_BLOCK_CONFIGURATION_REG_BLOCK_ENABLE));
9532 DP(NETIF_MSG_HW | NETIF_MSG_IFUP, "%s gates #2, #3 and #4\n",
9533 close ? "closing" : "opening");
9536 #define SHARED_MF_CLP_MAGIC 0x80000000 /* `magic' bit */
9538 static void bnx2x_clp_reset_prep(struct bnx2x *bp, u32 *magic_val)
9540 /* Do some magic... */
9541 u32 val = MF_CFG_RD(bp, shared_mf_config.clp_mb);
9542 *magic_val = val & SHARED_MF_CLP_MAGIC;
9543 MF_CFG_WR(bp, shared_mf_config.clp_mb, val | SHARED_MF_CLP_MAGIC);
9547 * bnx2x_clp_reset_done - restore the value of the `magic' bit.
9549 * @bp: driver handle
9550 * @magic_val: old value of the `magic' bit.
9552 static void bnx2x_clp_reset_done(struct bnx2x *bp, u32 magic_val)
9554 /* Restore the `magic' bit value... */
9555 u32 val = MF_CFG_RD(bp, shared_mf_config.clp_mb);
9556 MF_CFG_WR(bp, shared_mf_config.clp_mb,
9557 (val & (~SHARED_MF_CLP_MAGIC)) | magic_val);
9561 * bnx2x_reset_mcp_prep - prepare for MCP reset.
9563 * @bp: driver handle
9564 * @magic_val: old value of 'magic' bit.
9566 * Takes care of CLP configurations.
9568 static void bnx2x_reset_mcp_prep(struct bnx2x *bp, u32 *magic_val)
9571 u32 validity_offset;
9573 DP(NETIF_MSG_HW | NETIF_MSG_IFUP, "Starting\n");
9575 /* Set `magic' bit in order to save MF config */
9576 if (!CHIP_IS_E1(bp))
9577 bnx2x_clp_reset_prep(bp, magic_val);
9579 /* Get shmem offset */
9580 shmem = REG_RD(bp, MISC_REG_SHARED_MEM_ADDR);
9582 offsetof(struct shmem_region, validity_map[BP_PORT(bp)]);
9584 /* Clear validity map flags */
9586 REG_WR(bp, shmem + validity_offset, 0);
9589 #define MCP_TIMEOUT 5000 /* 5 seconds (in ms) */
9590 #define MCP_ONE_TIMEOUT 100 /* 100 ms */
9593 * bnx2x_mcp_wait_one - wait for MCP_ONE_TIMEOUT
9595 * @bp: driver handle
9597 static void bnx2x_mcp_wait_one(struct bnx2x *bp)
9599 /* special handling for emulation and FPGA,
9600 wait 10 times longer */
9601 if (CHIP_REV_IS_SLOW(bp))
9602 msleep(MCP_ONE_TIMEOUT*10);
9604 msleep(MCP_ONE_TIMEOUT);
9608 * initializes bp->common.shmem_base and waits for validity signature to appear
9610 static int bnx2x_init_shmem(struct bnx2x *bp)
9616 bp->common.shmem_base = REG_RD(bp, MISC_REG_SHARED_MEM_ADDR);
9618 /* If we read all 0xFFs, means we are in PCI error state and
9619 * should bail out to avoid crashes on adapter's FW reads.
9621 if (bp->common.shmem_base == 0xFFFFFFFF) {
9622 bp->flags |= NO_MCP_FLAG;
9626 if (bp->common.shmem_base) {
9627 val = SHMEM_RD(bp, validity_map[BP_PORT(bp)]);
9628 if (val & SHR_MEM_VALIDITY_MB)
9632 bnx2x_mcp_wait_one(bp);
9634 } while (cnt++ < (MCP_TIMEOUT / MCP_ONE_TIMEOUT));
9636 BNX2X_ERR("BAD MCP validity signature\n");
9641 static int bnx2x_reset_mcp_comp(struct bnx2x *bp, u32 magic_val)
9643 int rc = bnx2x_init_shmem(bp);
9645 /* Restore the `magic' bit value */
9646 if (!CHIP_IS_E1(bp))
9647 bnx2x_clp_reset_done(bp, magic_val);
9652 static void bnx2x_pxp_prep(struct bnx2x *bp)
9654 if (!CHIP_IS_E1(bp)) {
9655 REG_WR(bp, PXP2_REG_RD_START_INIT, 0);
9656 REG_WR(bp, PXP2_REG_RQ_RBC_DONE, 0);
9661 * Reset the whole chip except for:
9663 * - PCI Glue, PSWHST, PXP/PXP2 RF (all controlled by
9666 * - MISC (including AEU)
9670 static void bnx2x_process_kill_chip_reset(struct bnx2x *bp, bool global)
9672 u32 not_reset_mask1, reset_mask1, not_reset_mask2, reset_mask2;
9673 u32 global_bits2, stay_reset2;
9676 * Bits that have to be set in reset_mask2 if we want to reset 'global'
9677 * (per chip) blocks.
9680 MISC_REGISTERS_RESET_REG_2_RST_MCP_N_RESET_CMN_CPU |
9681 MISC_REGISTERS_RESET_REG_2_RST_MCP_N_RESET_CMN_CORE;
9683 /* Don't reset the following blocks.
9684 * Important: per port blocks (such as EMAC, BMAC, UMAC) can't be
9685 * reset, as in 4 port device they might still be owned
9686 * by the MCP (there is only one leader per path).
9689 MISC_REGISTERS_RESET_REG_1_RST_HC |
9690 MISC_REGISTERS_RESET_REG_1_RST_PXPV |
9691 MISC_REGISTERS_RESET_REG_1_RST_PXP;
9694 MISC_REGISTERS_RESET_REG_2_RST_PCI_MDIO |
9695 MISC_REGISTERS_RESET_REG_2_RST_EMAC0_HARD_CORE |
9696 MISC_REGISTERS_RESET_REG_2_RST_EMAC1_HARD_CORE |
9697 MISC_REGISTERS_RESET_REG_2_RST_MISC_CORE |
9698 MISC_REGISTERS_RESET_REG_2_RST_RBCN |
9699 MISC_REGISTERS_RESET_REG_2_RST_GRC |
9700 MISC_REGISTERS_RESET_REG_2_RST_MCP_N_RESET_REG_HARD_CORE |
9701 MISC_REGISTERS_RESET_REG_2_RST_MCP_N_HARD_CORE_RST_B |
9702 MISC_REGISTERS_RESET_REG_2_RST_ATC |
9703 MISC_REGISTERS_RESET_REG_2_PGLC |
9704 MISC_REGISTERS_RESET_REG_2_RST_BMAC0 |
9705 MISC_REGISTERS_RESET_REG_2_RST_BMAC1 |
9706 MISC_REGISTERS_RESET_REG_2_RST_EMAC0 |
9707 MISC_REGISTERS_RESET_REG_2_RST_EMAC1 |
9708 MISC_REGISTERS_RESET_REG_2_UMAC0 |
9709 MISC_REGISTERS_RESET_REG_2_UMAC1;
9712 * Keep the following blocks in reset:
9713 * - all xxMACs are handled by the bnx2x_link code.
9716 MISC_REGISTERS_RESET_REG_2_XMAC |
9717 MISC_REGISTERS_RESET_REG_2_XMAC_SOFT;
9719 /* Full reset masks according to the chip */
9720 reset_mask1 = 0xffffffff;
9723 reset_mask2 = 0xffff;
9724 else if (CHIP_IS_E1H(bp))
9725 reset_mask2 = 0x1ffff;
9726 else if (CHIP_IS_E2(bp))
9727 reset_mask2 = 0xfffff;
9728 else /* CHIP_IS_E3 */
9729 reset_mask2 = 0x3ffffff;
9731 /* Don't reset global blocks unless we need to */
9733 reset_mask2 &= ~global_bits2;
9736 * In case of attention in the QM, we need to reset PXP
9737 * (MISC_REGISTERS_RESET_REG_2_RST_PXP_RQ_RD_WR) before QM
9738 * because otherwise QM reset would release 'close the gates' shortly
9739 * before resetting the PXP, then the PSWRQ would send a write
9740 * request to PGLUE. Then when PXP is reset, PGLUE would try to
9741 * read the payload data from PSWWR, but PSWWR would not
9742 * respond. The write queue in PGLUE would stuck, dmae commands
9743 * would not return. Therefore it's important to reset the second
9744 * reset register (containing the
9745 * MISC_REGISTERS_RESET_REG_2_RST_PXP_RQ_RD_WR bit) before the
9746 * first one (containing the MISC_REGISTERS_RESET_REG_1_RST_QM
9749 REG_WR(bp, GRCBASE_MISC + MISC_REGISTERS_RESET_REG_2_CLEAR,
9750 reset_mask2 & (~not_reset_mask2));
9752 REG_WR(bp, GRCBASE_MISC + MISC_REGISTERS_RESET_REG_1_CLEAR,
9753 reset_mask1 & (~not_reset_mask1));
9757 REG_WR(bp, GRCBASE_MISC + MISC_REGISTERS_RESET_REG_2_SET,
9758 reset_mask2 & (~stay_reset2));
9762 REG_WR(bp, GRCBASE_MISC + MISC_REGISTERS_RESET_REG_1_SET, reset_mask1);
9766 * bnx2x_er_poll_igu_vq - poll for pending writes bit.
9767 * It should get cleared in no more than 1s.
9769 * @bp: driver handle
9771 * It should get cleared in no more than 1s. Returns 0 if
9772 * pending writes bit gets cleared.
9774 static int bnx2x_er_poll_igu_vq(struct bnx2x *bp)
9780 pend_bits = REG_RD(bp, IGU_REG_PENDING_BITS_STATUS);
9785 usleep_range(1000, 2000);
9786 } while (cnt-- > 0);
9789 BNX2X_ERR("Still pending IGU requests pend_bits=%x!\n",
9797 static int bnx2x_process_kill(struct bnx2x *bp, bool global)
9801 u32 sr_cnt, blk_cnt, port_is_idle_0, port_is_idle_1, pgl_exp_rom2;
9804 /* Empty the Tetris buffer, wait for 1s */
9806 sr_cnt = REG_RD(bp, PXP2_REG_RD_SR_CNT);
9807 blk_cnt = REG_RD(bp, PXP2_REG_RD_BLK_CNT);
9808 port_is_idle_0 = REG_RD(bp, PXP2_REG_RD_PORT_IS_IDLE_0);
9809 port_is_idle_1 = REG_RD(bp, PXP2_REG_RD_PORT_IS_IDLE_1);
9810 pgl_exp_rom2 = REG_RD(bp, PXP2_REG_PGL_EXP_ROM2);
9812 tags_63_32 = REG_RD(bp, PGLUE_B_REG_TAGS_63_32);
9814 if ((sr_cnt == 0x7e) && (blk_cnt == 0xa0) &&
9815 ((port_is_idle_0 & 0x1) == 0x1) &&
9816 ((port_is_idle_1 & 0x1) == 0x1) &&
9817 (pgl_exp_rom2 == 0xffffffff) &&
9818 (!CHIP_IS_E3(bp) || (tags_63_32 == 0xffffffff)))
9820 usleep_range(1000, 2000);
9821 } while (cnt-- > 0);
9824 BNX2X_ERR("Tetris buffer didn't get empty or there are still outstanding read requests after 1s!\n");
9825 BNX2X_ERR("sr_cnt=0x%08x, blk_cnt=0x%08x, port_is_idle_0=0x%08x, port_is_idle_1=0x%08x, pgl_exp_rom2=0x%08x\n",
9826 sr_cnt, blk_cnt, port_is_idle_0, port_is_idle_1,
9833 /* Close gates #2, #3 and #4 */
9834 bnx2x_set_234_gates(bp, true);
9836 /* Poll for IGU VQs for 57712 and newer chips */
9837 if (!CHIP_IS_E1x(bp) && bnx2x_er_poll_igu_vq(bp))
9840 /* TBD: Indicate that "process kill" is in progress to MCP */
9842 /* Clear "unprepared" bit */
9843 REG_WR(bp, MISC_REG_UNPREPARED, 0);
9846 /* Wait for 1ms to empty GLUE and PCI-E core queues,
9847 * PSWHST, GRC and PSWRD Tetris buffer.
9849 usleep_range(1000, 2000);
9851 /* Prepare to chip reset: */
9854 bnx2x_reset_mcp_prep(bp, &val);
9860 /* reset the chip */
9861 bnx2x_process_kill_chip_reset(bp, global);
9864 /* clear errors in PGB */
9865 if (!CHIP_IS_E1x(bp))
9866 REG_WR(bp, PGLUE_B_REG_LATCHED_ERRORS_CLR, 0x7f);
9868 /* Recover after reset: */
9870 if (global && bnx2x_reset_mcp_comp(bp, val))
9873 /* TBD: Add resetting the NO_MCP mode DB here */
9875 /* Open the gates #2, #3 and #4 */
9876 bnx2x_set_234_gates(bp, false);
9878 /* TBD: IGU/AEU preparation bring back the AEU/IGU to a
9879 * reset state, re-enable attentions. */
9884 static int bnx2x_leader_reset(struct bnx2x *bp)
9887 bool global = bnx2x_reset_is_global(bp);
9890 /* if not going to reset MCP - load "fake" driver to reset HW while
9891 * driver is owner of the HW
9893 if (!global && !BP_NOMCP(bp)) {
9894 load_code = bnx2x_fw_command(bp, DRV_MSG_CODE_LOAD_REQ,
9895 DRV_MSG_CODE_LOAD_REQ_WITH_LFA);
9897 BNX2X_ERR("MCP response failure, aborting\n");
9899 goto exit_leader_reset;
9901 if ((load_code != FW_MSG_CODE_DRV_LOAD_COMMON_CHIP) &&
9902 (load_code != FW_MSG_CODE_DRV_LOAD_COMMON)) {
9903 BNX2X_ERR("MCP unexpected resp, aborting\n");
9905 goto exit_leader_reset2;
9907 load_code = bnx2x_fw_command(bp, DRV_MSG_CODE_LOAD_DONE, 0);
9909 BNX2X_ERR("MCP response failure, aborting\n");
9911 goto exit_leader_reset2;
9915 /* Try to recover after the failure */
9916 if (bnx2x_process_kill(bp, global)) {
9917 BNX2X_ERR("Something bad had happen on engine %d! Aii!\n",
9920 goto exit_leader_reset2;
9924 * Clear RESET_IN_PROGRES and RESET_GLOBAL bits and update the driver
9927 bnx2x_set_reset_done(bp);
9929 bnx2x_clear_reset_global(bp);
9932 /* unload "fake driver" if it was loaded */
9933 if (!global && !BP_NOMCP(bp)) {
9934 bnx2x_fw_command(bp, DRV_MSG_CODE_UNLOAD_REQ_WOL_MCP, 0);
9935 bnx2x_fw_command(bp, DRV_MSG_CODE_UNLOAD_DONE, 0);
9939 bnx2x_release_leader_lock(bp);
9944 static void bnx2x_recovery_failed(struct bnx2x *bp)
9946 netdev_err(bp->dev, "Recovery has failed. Power cycle is needed.\n");
9948 /* Disconnect this device */
9949 netif_device_detach(bp->dev);
9952 * Block ifup for all function on this engine until "process kill"
9955 bnx2x_set_reset_in_progress(bp);
9957 /* Shut down the power */
9958 bnx2x_set_power_state(bp, PCI_D3hot);
9960 bp->recovery_state = BNX2X_RECOVERY_FAILED;
9966 * Assumption: runs under rtnl lock. This together with the fact
9967 * that it's called only from bnx2x_sp_rtnl() ensure that it
9968 * will never be called when netif_running(bp->dev) is false.
9970 static void bnx2x_parity_recover(struct bnx2x *bp)
9972 bool global = false;
9973 u32 error_recovered, error_unrecovered;
9976 DP(NETIF_MSG_HW, "Handling parity\n");
9978 switch (bp->recovery_state) {
9979 case BNX2X_RECOVERY_INIT:
9980 DP(NETIF_MSG_HW, "State is BNX2X_RECOVERY_INIT\n");
9981 is_parity = bnx2x_chk_parity_attn(bp, &global, false);
9982 WARN_ON(!is_parity);
9984 /* Try to get a LEADER_LOCK HW lock */
9985 if (bnx2x_trylock_leader_lock(bp)) {
9986 bnx2x_set_reset_in_progress(bp);
9988 * Check if there is a global attention and if
9989 * there was a global attention, set the global
9994 bnx2x_set_reset_global(bp);
9999 /* Stop the driver */
10000 /* If interface has been removed - break */
10001 if (bnx2x_nic_unload(bp, UNLOAD_RECOVERY, false))
10004 bp->recovery_state = BNX2X_RECOVERY_WAIT;
10006 /* Ensure "is_leader", MCP command sequence and
10007 * "recovery_state" update values are seen on other
10013 case BNX2X_RECOVERY_WAIT:
10014 DP(NETIF_MSG_HW, "State is BNX2X_RECOVERY_WAIT\n");
10015 if (bp->is_leader) {
10016 int other_engine = BP_PATH(bp) ? 0 : 1;
10017 bool other_load_status =
10018 bnx2x_get_load_status(bp, other_engine);
10020 bnx2x_get_load_status(bp, BP_PATH(bp));
10021 global = bnx2x_reset_is_global(bp);
10024 * In case of a parity in a global block, let
10025 * the first leader that performs a
10026 * leader_reset() reset the global blocks in
10027 * order to clear global attentions. Otherwise
10028 * the gates will remain closed for that
10032 (global && other_load_status)) {
10033 /* Wait until all other functions get
10036 schedule_delayed_work(&bp->sp_rtnl_task,
10040 /* If all other functions got down -
10041 * try to bring the chip back to
10042 * normal. In any case it's an exit
10043 * point for a leader.
10045 if (bnx2x_leader_reset(bp)) {
10046 bnx2x_recovery_failed(bp);
10050 /* If we are here, means that the
10051 * leader has succeeded and doesn't
10052 * want to be a leader any more. Try
10053 * to continue as a none-leader.
10057 } else { /* non-leader */
10058 if (!bnx2x_reset_is_done(bp, BP_PATH(bp))) {
10059 /* Try to get a LEADER_LOCK HW lock as
10060 * long as a former leader may have
10061 * been unloaded by the user or
10062 * released a leadership by another
10065 if (bnx2x_trylock_leader_lock(bp)) {
10066 /* I'm a leader now! Restart a
10073 schedule_delayed_work(&bp->sp_rtnl_task,
10079 * If there was a global attention, wait
10080 * for it to be cleared.
10082 if (bnx2x_reset_is_global(bp)) {
10083 schedule_delayed_work(
10090 bp->eth_stats.recoverable_error;
10091 error_unrecovered =
10092 bp->eth_stats.unrecoverable_error;
10093 bp->recovery_state =
10094 BNX2X_RECOVERY_NIC_LOADING;
10095 if (bnx2x_nic_load(bp, LOAD_NORMAL)) {
10096 error_unrecovered++;
10097 netdev_err(bp->dev,
10098 "Recovery failed. Power cycle needed\n");
10099 /* Disconnect this device */
10100 netif_device_detach(bp->dev);
10101 /* Shut down the power */
10102 bnx2x_set_power_state(
10106 bp->recovery_state =
10107 BNX2X_RECOVERY_DONE;
10111 bp->eth_stats.recoverable_error =
10113 bp->eth_stats.unrecoverable_error =
10125 static int bnx2x_udp_port_update(struct bnx2x *bp)
10127 struct bnx2x_func_switch_update_params *switch_update_params;
10128 struct bnx2x_func_state_params func_params = {NULL};
10129 struct bnx2x_udp_tunnel *udp_tunnel;
10130 u16 vxlan_port = 0, geneve_port = 0;
10133 switch_update_params = &func_params.params.switch_update;
10135 /* Prepare parameters for function state transitions */
10136 __set_bit(RAMROD_COMP_WAIT, &func_params.ramrod_flags);
10137 __set_bit(RAMROD_RETRY, &func_params.ramrod_flags);
10139 func_params.f_obj = &bp->func_obj;
10140 func_params.cmd = BNX2X_F_CMD_SWITCH_UPDATE;
10142 /* Function parameters */
10143 __set_bit(BNX2X_F_UPDATE_TUNNEL_CFG_CHNG,
10144 &switch_update_params->changes);
10146 if (bp->udp_tunnel_ports[BNX2X_UDP_PORT_GENEVE].count) {
10147 udp_tunnel = &bp->udp_tunnel_ports[BNX2X_UDP_PORT_GENEVE];
10148 geneve_port = udp_tunnel->dst_port;
10149 switch_update_params->geneve_dst_port = geneve_port;
10152 if (bp->udp_tunnel_ports[BNX2X_UDP_PORT_VXLAN].count) {
10153 udp_tunnel = &bp->udp_tunnel_ports[BNX2X_UDP_PORT_VXLAN];
10154 vxlan_port = udp_tunnel->dst_port;
10155 switch_update_params->vxlan_dst_port = vxlan_port;
10158 /* Re-enable inner-rss for the offloaded UDP tunnels */
10159 __set_bit(BNX2X_F_UPDATE_TUNNEL_INNER_RSS,
10160 &switch_update_params->changes);
10162 rc = bnx2x_func_state_change(bp, &func_params);
10164 BNX2X_ERR("failed to set UDP dst port to %04x %04x (rc = 0x%x)\n",
10165 vxlan_port, geneve_port, rc);
10168 "Configured UDP ports: Vxlan [%04x] Geneve [%04x]\n",
10169 vxlan_port, geneve_port);
10174 static void __bnx2x_add_udp_port(struct bnx2x *bp, u16 port,
10175 enum bnx2x_udp_port_type type)
10177 struct bnx2x_udp_tunnel *udp_port = &bp->udp_tunnel_ports[type];
10179 if (!netif_running(bp->dev) || !IS_PF(bp) || CHIP_IS_E1x(bp))
10182 if (udp_port->count && udp_port->dst_port == port) {
10187 if (udp_port->count) {
10189 "UDP tunnel [%d] - destination port limit reached\n",
10194 udp_port->dst_port = port;
10195 udp_port->count = 1;
10196 bnx2x_schedule_sp_rtnl(bp, BNX2X_SP_RTNL_CHANGE_UDP_PORT, 0);
10199 static void __bnx2x_del_udp_port(struct bnx2x *bp, u16 port,
10200 enum bnx2x_udp_port_type type)
10202 struct bnx2x_udp_tunnel *udp_port = &bp->udp_tunnel_ports[type];
10204 if (!IS_PF(bp) || CHIP_IS_E1x(bp))
10207 if (!udp_port->count || udp_port->dst_port != port) {
10208 DP(BNX2X_MSG_SP, "Invalid UDP tunnel [%d] port\n",
10213 /* Remove reference, and make certain it's no longer in use */
10215 if (udp_port->count)
10217 udp_port->dst_port = 0;
10219 if (netif_running(bp->dev))
10220 bnx2x_schedule_sp_rtnl(bp, BNX2X_SP_RTNL_CHANGE_UDP_PORT, 0);
10222 DP(BNX2X_MSG_SP, "Deleted UDP tunnel [%d] port %d\n",
10226 static void bnx2x_udp_tunnel_add(struct net_device *netdev,
10227 struct udp_tunnel_info *ti)
10229 struct bnx2x *bp = netdev_priv(netdev);
10230 u16 t_port = ntohs(ti->port);
10232 switch (ti->type) {
10233 case UDP_TUNNEL_TYPE_VXLAN:
10234 __bnx2x_add_udp_port(bp, t_port, BNX2X_UDP_PORT_VXLAN);
10236 case UDP_TUNNEL_TYPE_GENEVE:
10237 __bnx2x_add_udp_port(bp, t_port, BNX2X_UDP_PORT_GENEVE);
10244 static void bnx2x_udp_tunnel_del(struct net_device *netdev,
10245 struct udp_tunnel_info *ti)
10247 struct bnx2x *bp = netdev_priv(netdev);
10248 u16 t_port = ntohs(ti->port);
10250 switch (ti->type) {
10251 case UDP_TUNNEL_TYPE_VXLAN:
10252 __bnx2x_del_udp_port(bp, t_port, BNX2X_UDP_PORT_VXLAN);
10254 case UDP_TUNNEL_TYPE_GENEVE:
10255 __bnx2x_del_udp_port(bp, t_port, BNX2X_UDP_PORT_GENEVE);
10262 static int bnx2x_close(struct net_device *dev);
10264 /* bnx2x_nic_unload() flushes the bnx2x_wq, thus reset task is
10265 * scheduled on a general queue in order to prevent a dead lock.
10267 static void bnx2x_sp_rtnl_task(struct work_struct *work)
10269 struct bnx2x *bp = container_of(work, struct bnx2x, sp_rtnl_task.work);
10273 if (!netif_running(bp->dev)) {
10278 if (unlikely(bp->recovery_state != BNX2X_RECOVERY_DONE)) {
10279 #ifdef BNX2X_STOP_ON_ERROR
10280 BNX2X_ERR("recovery flow called but STOP_ON_ERROR defined so reset not done to allow debug dump,\n"
10281 "you will need to reboot when done\n");
10282 goto sp_rtnl_not_reset;
10285 * Clear all pending SP commands as we are going to reset the
10288 bp->sp_rtnl_state = 0;
10291 bnx2x_parity_recover(bp);
10297 if (test_and_clear_bit(BNX2X_SP_RTNL_TX_TIMEOUT, &bp->sp_rtnl_state)) {
10298 #ifdef BNX2X_STOP_ON_ERROR
10299 BNX2X_ERR("recovery flow called but STOP_ON_ERROR defined so reset not done to allow debug dump,\n"
10300 "you will need to reboot when done\n");
10301 goto sp_rtnl_not_reset;
10305 * Clear all pending SP commands as we are going to reset the
10308 bp->sp_rtnl_state = 0;
10311 /* Immediately indicate link as down */
10312 bp->link_vars.link_up = 0;
10313 bp->force_link_down = true;
10314 netif_carrier_off(bp->dev);
10315 BNX2X_ERR("Indicating link is down due to Tx-timeout\n");
10317 bnx2x_nic_unload(bp, UNLOAD_NORMAL, true);
10318 /* When ret value shows failure of allocation failure,
10319 * the nic is rebooted again. If open still fails, a error
10320 * message to notify the user.
10322 if (bnx2x_nic_load(bp, LOAD_NORMAL) == -ENOMEM) {
10323 bnx2x_nic_unload(bp, UNLOAD_NORMAL, true);
10324 if (bnx2x_nic_load(bp, LOAD_NORMAL))
10325 BNX2X_ERR("Open the NIC fails again!\n");
10330 #ifdef BNX2X_STOP_ON_ERROR
10333 if (test_and_clear_bit(BNX2X_SP_RTNL_SETUP_TC, &bp->sp_rtnl_state))
10334 bnx2x_setup_tc(bp->dev, bp->dcbx_port_params.ets.num_of_cos);
10335 if (test_and_clear_bit(BNX2X_SP_RTNL_AFEX_F_UPDATE, &bp->sp_rtnl_state))
10336 bnx2x_after_function_update(bp);
10338 * in case of fan failure we need to reset id if the "stop on error"
10339 * debug flag is set, since we trying to prevent permanent overheating
10342 if (test_and_clear_bit(BNX2X_SP_RTNL_FAN_FAILURE, &bp->sp_rtnl_state)) {
10343 DP(NETIF_MSG_HW, "fan failure detected. Unloading driver\n");
10344 netif_device_detach(bp->dev);
10345 bnx2x_close(bp->dev);
10350 if (test_and_clear_bit(BNX2X_SP_RTNL_VFPF_MCAST, &bp->sp_rtnl_state)) {
10352 "sending set mcast vf pf channel message from rtnl sp-task\n");
10353 bnx2x_vfpf_set_mcast(bp->dev);
10355 if (test_and_clear_bit(BNX2X_SP_RTNL_VFPF_CHANNEL_DOWN,
10356 &bp->sp_rtnl_state)){
10357 if (netif_carrier_ok(bp->dev)) {
10358 bnx2x_tx_disable(bp);
10359 BNX2X_ERR("PF indicated channel is not servicable anymore. This means this VF device is no longer operational\n");
10363 if (test_and_clear_bit(BNX2X_SP_RTNL_RX_MODE, &bp->sp_rtnl_state)) {
10364 DP(BNX2X_MSG_SP, "Handling Rx Mode setting\n");
10365 bnx2x_set_rx_mode_inner(bp);
10368 if (test_and_clear_bit(BNX2X_SP_RTNL_HYPERVISOR_VLAN,
10369 &bp->sp_rtnl_state))
10370 bnx2x_pf_set_vfs_vlan(bp);
10372 if (test_and_clear_bit(BNX2X_SP_RTNL_TX_STOP, &bp->sp_rtnl_state)) {
10373 bnx2x_dcbx_stop_hw_tx(bp);
10374 bnx2x_dcbx_resume_hw_tx(bp);
10377 if (test_and_clear_bit(BNX2X_SP_RTNL_GET_DRV_VERSION,
10378 &bp->sp_rtnl_state))
10379 bnx2x_update_mng_version(bp);
10381 if (test_and_clear_bit(BNX2X_SP_RTNL_UPDATE_SVID, &bp->sp_rtnl_state))
10382 bnx2x_handle_update_svid_cmd(bp);
10384 if (test_and_clear_bit(BNX2X_SP_RTNL_CHANGE_UDP_PORT,
10385 &bp->sp_rtnl_state)) {
10386 if (bnx2x_udp_port_update(bp)) {
10387 /* On error, forget configuration */
10388 memset(bp->udp_tunnel_ports, 0,
10389 sizeof(struct bnx2x_udp_tunnel) *
10390 BNX2X_UDP_PORT_MAX);
10392 /* Since we don't store additional port information,
10393 * if no ports are configured for any feature ask for
10394 * information about currently configured ports.
10396 if (!bp->udp_tunnel_ports[BNX2X_UDP_PORT_VXLAN].count &&
10397 !bp->udp_tunnel_ports[BNX2X_UDP_PORT_GENEVE].count)
10398 udp_tunnel_get_rx_info(bp->dev);
10402 /* work which needs rtnl lock not-taken (as it takes the lock itself and
10403 * can be called from other contexts as well)
10407 /* enable SR-IOV if applicable */
10408 if (IS_SRIOV(bp) && test_and_clear_bit(BNX2X_SP_RTNL_ENABLE_SRIOV,
10409 &bp->sp_rtnl_state)) {
10410 bnx2x_disable_sriov(bp);
10411 bnx2x_enable_sriov(bp);
10415 static void bnx2x_period_task(struct work_struct *work)
10417 struct bnx2x *bp = container_of(work, struct bnx2x, period_task.work);
10419 if (!netif_running(bp->dev))
10420 goto period_task_exit;
10422 if (CHIP_REV_IS_SLOW(bp)) {
10423 BNX2X_ERR("period task called on emulation, ignoring\n");
10424 goto period_task_exit;
10427 bnx2x_acquire_phy_lock(bp);
10429 * The barrier is needed to ensure the ordering between the writing to
10430 * the bp->port.pmf in the bnx2x_nic_load() or bnx2x_pmf_update() and
10431 * the reading here.
10434 if (bp->port.pmf) {
10435 bnx2x_period_func(&bp->link_params, &bp->link_vars);
10437 /* Re-queue task in 1 sec */
10438 queue_delayed_work(bnx2x_wq, &bp->period_task, 1*HZ);
10441 bnx2x_release_phy_lock(bp);
10447 * Init service functions
10450 static u32 bnx2x_get_pretend_reg(struct bnx2x *bp)
10452 u32 base = PXP2_REG_PGL_PRETEND_FUNC_F0;
10453 u32 stride = PXP2_REG_PGL_PRETEND_FUNC_F1 - base;
10454 return base + (BP_ABS_FUNC(bp)) * stride;
10457 static bool bnx2x_prev_unload_close_umac(struct bnx2x *bp,
10458 u8 port, u32 reset_reg,
10459 struct bnx2x_mac_vals *vals)
10461 u32 mask = MISC_REGISTERS_RESET_REG_2_UMAC0 << port;
10464 if (!(mask & reset_reg))
10467 BNX2X_DEV_INFO("Disable umac Rx %02x\n", port);
10468 base_addr = port ? GRCBASE_UMAC1 : GRCBASE_UMAC0;
10469 vals->umac_addr[port] = base_addr + UMAC_REG_COMMAND_CONFIG;
10470 vals->umac_val[port] = REG_RD(bp, vals->umac_addr[port]);
10471 REG_WR(bp, vals->umac_addr[port], 0);
10476 static void bnx2x_prev_unload_close_mac(struct bnx2x *bp,
10477 struct bnx2x_mac_vals *vals)
10479 u32 val, base_addr, offset, mask, reset_reg;
10480 bool mac_stopped = false;
10481 u8 port = BP_PORT(bp);
10483 /* reset addresses as they also mark which values were changed */
10484 memset(vals, 0, sizeof(*vals));
10486 reset_reg = REG_RD(bp, MISC_REG_RESET_REG_2);
10488 if (!CHIP_IS_E3(bp)) {
10489 val = REG_RD(bp, NIG_REG_BMAC0_REGS_OUT_EN + port * 4);
10490 mask = MISC_REGISTERS_RESET_REG_2_RST_BMAC0 << port;
10491 if ((mask & reset_reg) && val) {
10493 BNX2X_DEV_INFO("Disable bmac Rx\n");
10494 base_addr = BP_PORT(bp) ? NIG_REG_INGRESS_BMAC1_MEM
10495 : NIG_REG_INGRESS_BMAC0_MEM;
10496 offset = CHIP_IS_E2(bp) ? BIGMAC2_REGISTER_BMAC_CONTROL
10497 : BIGMAC_REGISTER_BMAC_CONTROL;
10500 * use rd/wr since we cannot use dmae. This is safe
10501 * since MCP won't access the bus due to the request
10502 * to unload, and no function on the path can be
10503 * loaded at this time.
10505 wb_data[0] = REG_RD(bp, base_addr + offset);
10506 wb_data[1] = REG_RD(bp, base_addr + offset + 0x4);
10507 vals->bmac_addr = base_addr + offset;
10508 vals->bmac_val[0] = wb_data[0];
10509 vals->bmac_val[1] = wb_data[1];
10510 wb_data[0] &= ~BMAC_CONTROL_RX_ENABLE;
10511 REG_WR(bp, vals->bmac_addr, wb_data[0]);
10512 REG_WR(bp, vals->bmac_addr + 0x4, wb_data[1]);
10514 BNX2X_DEV_INFO("Disable emac Rx\n");
10515 vals->emac_addr = NIG_REG_NIG_EMAC0_EN + BP_PORT(bp)*4;
10516 vals->emac_val = REG_RD(bp, vals->emac_addr);
10517 REG_WR(bp, vals->emac_addr, 0);
10518 mac_stopped = true;
10520 if (reset_reg & MISC_REGISTERS_RESET_REG_2_XMAC) {
10521 BNX2X_DEV_INFO("Disable xmac Rx\n");
10522 base_addr = BP_PORT(bp) ? GRCBASE_XMAC1 : GRCBASE_XMAC0;
10523 val = REG_RD(bp, base_addr + XMAC_REG_PFC_CTRL_HI);
10524 REG_WR(bp, base_addr + XMAC_REG_PFC_CTRL_HI,
10526 REG_WR(bp, base_addr + XMAC_REG_PFC_CTRL_HI,
10528 vals->xmac_addr = base_addr + XMAC_REG_CTRL;
10529 vals->xmac_val = REG_RD(bp, vals->xmac_addr);
10530 REG_WR(bp, vals->xmac_addr, 0);
10531 mac_stopped = true;
10534 mac_stopped |= bnx2x_prev_unload_close_umac(bp, 0,
10536 mac_stopped |= bnx2x_prev_unload_close_umac(bp, 1,
10544 #define BNX2X_PREV_UNDI_PROD_ADDR(p) (BAR_TSTRORM_INTMEM + 0x1508 + ((p) << 4))
10545 #define BNX2X_PREV_UNDI_PROD_ADDR_H(f) (BAR_TSTRORM_INTMEM + \
10546 0x1848 + ((f) << 4))
10547 #define BNX2X_PREV_UNDI_RCQ(val) ((val) & 0xffff)
10548 #define BNX2X_PREV_UNDI_BD(val) ((val) >> 16 & 0xffff)
10549 #define BNX2X_PREV_UNDI_PROD(rcq, bd) ((bd) << 16 | (rcq))
10551 #define BCM_5710_UNDI_FW_MF_MAJOR (0x07)
10552 #define BCM_5710_UNDI_FW_MF_MINOR (0x08)
10553 #define BCM_5710_UNDI_FW_MF_VERS (0x05)
10555 static bool bnx2x_prev_is_after_undi(struct bnx2x *bp)
10557 /* UNDI marks its presence in DORQ -
10558 * it initializes CID offset for normal bell to 0x7
10560 if (!(REG_RD(bp, MISC_REG_RESET_REG_1) &
10561 MISC_REGISTERS_RESET_REG_1_RST_DORQ))
10564 if (REG_RD(bp, DORQ_REG_NORM_CID_OFST) == 0x7) {
10565 BNX2X_DEV_INFO("UNDI previously loaded\n");
10572 static void bnx2x_prev_unload_undi_inc(struct bnx2x *bp, u8 inc)
10577 if (BP_FUNC(bp) < 2)
10578 addr = BNX2X_PREV_UNDI_PROD_ADDR(BP_PORT(bp));
10580 addr = BNX2X_PREV_UNDI_PROD_ADDR_H(BP_FUNC(bp) - 2);
10582 tmp_reg = REG_RD(bp, addr);
10583 rcq = BNX2X_PREV_UNDI_RCQ(tmp_reg) + inc;
10584 bd = BNX2X_PREV_UNDI_BD(tmp_reg) + inc;
10586 tmp_reg = BNX2X_PREV_UNDI_PROD(rcq, bd);
10587 REG_WR(bp, addr, tmp_reg);
10589 BNX2X_DEV_INFO("UNDI producer [%d/%d][%08x] rings bd -> 0x%04x, rcq -> 0x%04x\n",
10590 BP_PORT(bp), BP_FUNC(bp), addr, bd, rcq);
10593 static int bnx2x_prev_mcp_done(struct bnx2x *bp)
10595 u32 rc = bnx2x_fw_command(bp, DRV_MSG_CODE_UNLOAD_DONE,
10596 DRV_MSG_CODE_UNLOAD_SKIP_LINK_RESET);
10598 BNX2X_ERR("MCP response failure, aborting\n");
10605 static struct bnx2x_prev_path_list *
10606 bnx2x_prev_path_get_entry(struct bnx2x *bp)
10608 struct bnx2x_prev_path_list *tmp_list;
10610 list_for_each_entry(tmp_list, &bnx2x_prev_list, list)
10611 if (PCI_SLOT(bp->pdev->devfn) == tmp_list->slot &&
10612 bp->pdev->bus->number == tmp_list->bus &&
10613 BP_PATH(bp) == tmp_list->path)
10619 static int bnx2x_prev_path_mark_eeh(struct bnx2x *bp)
10621 struct bnx2x_prev_path_list *tmp_list;
10624 rc = down_interruptible(&bnx2x_prev_sem);
10626 BNX2X_ERR("Received %d when tried to take lock\n", rc);
10630 tmp_list = bnx2x_prev_path_get_entry(bp);
10635 BNX2X_ERR("path %d: Entry does not exist for eeh; Flow occurs before initial insmod is over ?\n",
10639 up(&bnx2x_prev_sem);
10644 static bool bnx2x_prev_is_path_marked(struct bnx2x *bp)
10646 struct bnx2x_prev_path_list *tmp_list;
10649 if (down_trylock(&bnx2x_prev_sem))
10652 tmp_list = bnx2x_prev_path_get_entry(bp);
10654 if (tmp_list->aer) {
10655 DP(NETIF_MSG_HW, "Path %d was marked by AER\n",
10659 BNX2X_DEV_INFO("Path %d was already cleaned from previous drivers\n",
10664 up(&bnx2x_prev_sem);
10669 bool bnx2x_port_after_undi(struct bnx2x *bp)
10671 struct bnx2x_prev_path_list *entry;
10674 down(&bnx2x_prev_sem);
10676 entry = bnx2x_prev_path_get_entry(bp);
10677 val = !!(entry && (entry->undi & (1 << BP_PORT(bp))));
10679 up(&bnx2x_prev_sem);
10684 static int bnx2x_prev_mark_path(struct bnx2x *bp, bool after_undi)
10686 struct bnx2x_prev_path_list *tmp_list;
10689 rc = down_interruptible(&bnx2x_prev_sem);
10691 BNX2X_ERR("Received %d when tried to take lock\n", rc);
10695 /* Check whether the entry for this path already exists */
10696 tmp_list = bnx2x_prev_path_get_entry(bp);
10698 if (!tmp_list->aer) {
10699 BNX2X_ERR("Re-Marking the path.\n");
10701 DP(NETIF_MSG_HW, "Removing AER indication from path %d\n",
10705 up(&bnx2x_prev_sem);
10708 up(&bnx2x_prev_sem);
10710 /* Create an entry for this path and add it */
10711 tmp_list = kmalloc(sizeof(struct bnx2x_prev_path_list), GFP_KERNEL);
10713 BNX2X_ERR("Failed to allocate 'bnx2x_prev_path_list'\n");
10717 tmp_list->bus = bp->pdev->bus->number;
10718 tmp_list->slot = PCI_SLOT(bp->pdev->devfn);
10719 tmp_list->path = BP_PATH(bp);
10721 tmp_list->undi = after_undi ? (1 << BP_PORT(bp)) : 0;
10723 rc = down_interruptible(&bnx2x_prev_sem);
10725 BNX2X_ERR("Received %d when tried to take lock\n", rc);
10728 DP(NETIF_MSG_HW, "Marked path [%d] - finished previous unload\n",
10730 list_add(&tmp_list->list, &bnx2x_prev_list);
10731 up(&bnx2x_prev_sem);
10737 static int bnx2x_do_flr(struct bnx2x *bp)
10739 struct pci_dev *dev = bp->pdev;
10741 if (CHIP_IS_E1x(bp)) {
10742 BNX2X_DEV_INFO("FLR not supported in E1/E1H\n");
10746 /* only bootcode REQ_BC_VER_4_INITIATE_FLR and onwards support flr */
10747 if (bp->common.bc_ver < REQ_BC_VER_4_INITIATE_FLR) {
10748 BNX2X_ERR("FLR not supported by BC_VER: 0x%x\n",
10749 bp->common.bc_ver);
10753 if (!pci_wait_for_pending_transaction(dev))
10754 dev_err(&dev->dev, "transaction is not cleared; proceeding with reset anyway\n");
10756 BNX2X_DEV_INFO("Initiating FLR\n");
10757 bnx2x_fw_command(bp, DRV_MSG_CODE_INITIATE_FLR, 0);
10762 static int bnx2x_prev_unload_uncommon(struct bnx2x *bp)
10766 BNX2X_DEV_INFO("Uncommon unload Flow\n");
10768 /* Test if previous unload process was already finished for this path */
10769 if (bnx2x_prev_is_path_marked(bp))
10770 return bnx2x_prev_mcp_done(bp);
10772 BNX2X_DEV_INFO("Path is unmarked\n");
10774 /* Cannot proceed with FLR if UNDI is loaded, since FW does not match */
10775 if (bnx2x_prev_is_after_undi(bp))
10778 /* If function has FLR capabilities, and existing FW version matches
10779 * the one required, then FLR will be sufficient to clean any residue
10780 * left by previous driver
10782 rc = bnx2x_compare_fw_ver(bp, FW_MSG_CODE_DRV_LOAD_FUNCTION, false);
10785 /* fw version is good */
10786 BNX2X_DEV_INFO("FW version matches our own. Attempting FLR\n");
10787 rc = bnx2x_do_flr(bp);
10791 /* FLR was performed */
10792 BNX2X_DEV_INFO("FLR successful\n");
10796 BNX2X_DEV_INFO("Could not FLR\n");
10799 /* Close the MCP request, return failure*/
10800 rc = bnx2x_prev_mcp_done(bp);
10802 rc = BNX2X_PREV_WAIT_NEEDED;
10807 static int bnx2x_prev_unload_common(struct bnx2x *bp)
10809 u32 reset_reg, tmp_reg = 0, rc;
10810 bool prev_undi = false;
10811 struct bnx2x_mac_vals mac_vals;
10813 /* It is possible a previous function received 'common' answer,
10814 * but hasn't loaded yet, therefore creating a scenario of
10815 * multiple functions receiving 'common' on the same path.
10817 BNX2X_DEV_INFO("Common unload Flow\n");
10819 memset(&mac_vals, 0, sizeof(mac_vals));
10821 if (bnx2x_prev_is_path_marked(bp))
10822 return bnx2x_prev_mcp_done(bp);
10824 reset_reg = REG_RD(bp, MISC_REG_RESET_REG_1);
10826 /* Reset should be performed after BRB is emptied */
10827 if (reset_reg & MISC_REGISTERS_RESET_REG_1_RST_BRB1) {
10828 u32 timer_count = 1000;
10830 /* Close the MAC Rx to prevent BRB from filling up */
10831 bnx2x_prev_unload_close_mac(bp, &mac_vals);
10833 /* close LLH filters for both ports towards the BRB */
10834 bnx2x_set_rx_filter(&bp->link_params, 0);
10835 bp->link_params.port ^= 1;
10836 bnx2x_set_rx_filter(&bp->link_params, 0);
10837 bp->link_params.port ^= 1;
10839 /* Check if the UNDI driver was previously loaded */
10840 if (bnx2x_prev_is_after_undi(bp)) {
10842 /* clear the UNDI indication */
10843 REG_WR(bp, DORQ_REG_NORM_CID_OFST, 0);
10844 /* clear possible idle check errors */
10845 REG_RD(bp, NIG_REG_NIG_INT_STS_CLR_0);
10847 if (!CHIP_IS_E1x(bp))
10848 /* block FW from writing to host */
10849 REG_WR(bp, PGLUE_B_REG_INTERNAL_PFID_ENABLE_MASTER, 0);
10851 /* wait until BRB is empty */
10852 tmp_reg = REG_RD(bp, BRB1_REG_NUM_OF_FULL_BLOCKS);
10853 while (timer_count) {
10854 u32 prev_brb = tmp_reg;
10856 tmp_reg = REG_RD(bp, BRB1_REG_NUM_OF_FULL_BLOCKS);
10860 BNX2X_DEV_INFO("BRB still has 0x%08x\n", tmp_reg);
10862 /* reset timer as long as BRB actually gets emptied */
10863 if (prev_brb > tmp_reg)
10864 timer_count = 1000;
10868 /* If UNDI resides in memory, manually increment it */
10870 bnx2x_prev_unload_undi_inc(bp, 1);
10876 BNX2X_ERR("Failed to empty BRB, hope for the best\n");
10879 /* No packets are in the pipeline, path is ready for reset */
10880 bnx2x_reset_common(bp);
10882 if (mac_vals.xmac_addr)
10883 REG_WR(bp, mac_vals.xmac_addr, mac_vals.xmac_val);
10884 if (mac_vals.umac_addr[0])
10885 REG_WR(bp, mac_vals.umac_addr[0], mac_vals.umac_val[0]);
10886 if (mac_vals.umac_addr[1])
10887 REG_WR(bp, mac_vals.umac_addr[1], mac_vals.umac_val[1]);
10888 if (mac_vals.emac_addr)
10889 REG_WR(bp, mac_vals.emac_addr, mac_vals.emac_val);
10890 if (mac_vals.bmac_addr) {
10891 REG_WR(bp, mac_vals.bmac_addr, mac_vals.bmac_val[0]);
10892 REG_WR(bp, mac_vals.bmac_addr + 4, mac_vals.bmac_val[1]);
10895 rc = bnx2x_prev_mark_path(bp, prev_undi);
10897 bnx2x_prev_mcp_done(bp);
10901 return bnx2x_prev_mcp_done(bp);
10904 static int bnx2x_prev_unload(struct bnx2x *bp)
10906 int time_counter = 10;
10907 u32 rc, fw, hw_lock_reg, hw_lock_val;
10908 BNX2X_DEV_INFO("Entering Previous Unload Flow\n");
10910 /* clear hw from errors which may have resulted from an interrupted
10911 * dmae transaction.
10913 bnx2x_clean_pglue_errors(bp);
10915 /* Release previously held locks */
10916 hw_lock_reg = (BP_FUNC(bp) <= 5) ?
10917 (MISC_REG_DRIVER_CONTROL_1 + BP_FUNC(bp) * 8) :
10918 (MISC_REG_DRIVER_CONTROL_7 + (BP_FUNC(bp) - 6) * 8);
10920 hw_lock_val = REG_RD(bp, hw_lock_reg);
10922 if (hw_lock_val & HW_LOCK_RESOURCE_NVRAM) {
10923 BNX2X_DEV_INFO("Release Previously held NVRAM lock\n");
10924 REG_WR(bp, MCP_REG_MCPR_NVM_SW_ARB,
10925 (MCPR_NVM_SW_ARB_ARB_REQ_CLR1 << BP_PORT(bp)));
10928 BNX2X_DEV_INFO("Release Previously held hw lock\n");
10929 REG_WR(bp, hw_lock_reg, 0xffffffff);
10931 BNX2X_DEV_INFO("No need to release hw/nvram locks\n");
10933 if (MCPR_ACCESS_LOCK_LOCK & REG_RD(bp, MCP_REG_MCPR_ACCESS_LOCK)) {
10934 BNX2X_DEV_INFO("Release previously held alr\n");
10935 bnx2x_release_alr(bp);
10940 /* Lock MCP using an unload request */
10941 fw = bnx2x_fw_command(bp, DRV_MSG_CODE_UNLOAD_REQ_WOL_DIS, 0);
10943 BNX2X_ERR("MCP response failure, aborting\n");
10948 rc = down_interruptible(&bnx2x_prev_sem);
10950 BNX2X_ERR("Cannot check for AER; Received %d when tried to take lock\n",
10953 /* If Path is marked by EEH, ignore unload status */
10954 aer = !!(bnx2x_prev_path_get_entry(bp) &&
10955 bnx2x_prev_path_get_entry(bp)->aer);
10956 up(&bnx2x_prev_sem);
10959 if (fw == FW_MSG_CODE_DRV_UNLOAD_COMMON || aer) {
10960 rc = bnx2x_prev_unload_common(bp);
10964 /* non-common reply from MCP might require looping */
10965 rc = bnx2x_prev_unload_uncommon(bp);
10966 if (rc != BNX2X_PREV_WAIT_NEEDED)
10970 } while (--time_counter);
10972 if (!time_counter || rc) {
10973 BNX2X_DEV_INFO("Unloading previous driver did not occur, Possibly due to MF UNDI\n");
10974 rc = -EPROBE_DEFER;
10977 /* Mark function if its port was used to boot from SAN */
10978 if (bnx2x_port_after_undi(bp))
10979 bp->link_params.feature_config_flags |=
10980 FEATURE_CONFIG_BOOT_FROM_SAN;
10982 BNX2X_DEV_INFO("Finished Previous Unload Flow [%d]\n", rc);
10987 static void bnx2x_get_common_hwinfo(struct bnx2x *bp)
10989 u32 val, val2, val3, val4, id, boot_mode;
10992 /* Get the chip revision id and number. */
10993 /* chip num:16-31, rev:12-15, metal:4-11, bond_id:0-3 */
10994 val = REG_RD(bp, MISC_REG_CHIP_NUM);
10995 id = ((val & 0xffff) << 16);
10996 val = REG_RD(bp, MISC_REG_CHIP_REV);
10997 id |= ((val & 0xf) << 12);
10999 /* Metal is read from PCI regs, but we can't access >=0x400 from
11000 * the configuration space (so we need to reg_rd)
11002 val = REG_RD(bp, PCICFG_OFFSET + PCI_ID_VAL3);
11003 id |= (((val >> 24) & 0xf) << 4);
11004 val = REG_RD(bp, MISC_REG_BOND_ID);
11006 bp->common.chip_id = id;
11008 /* force 57811 according to MISC register */
11009 if (REG_RD(bp, MISC_REG_CHIP_TYPE) & MISC_REG_CHIP_TYPE_57811_MASK) {
11010 if (CHIP_IS_57810(bp))
11011 bp->common.chip_id = (CHIP_NUM_57811 << 16) |
11012 (bp->common.chip_id & 0x0000FFFF);
11013 else if (CHIP_IS_57810_MF(bp))
11014 bp->common.chip_id = (CHIP_NUM_57811_MF << 16) |
11015 (bp->common.chip_id & 0x0000FFFF);
11016 bp->common.chip_id |= 0x1;
11019 /* Set doorbell size */
11020 bp->db_size = (1 << BNX2X_DB_SHIFT);
11022 if (!CHIP_IS_E1x(bp)) {
11023 val = REG_RD(bp, MISC_REG_PORT4MODE_EN_OVWR);
11024 if ((val & 1) == 0)
11025 val = REG_RD(bp, MISC_REG_PORT4MODE_EN);
11027 val = (val >> 1) & 1;
11028 BNX2X_DEV_INFO("chip is in %s\n", val ? "4_PORT_MODE" :
11030 bp->common.chip_port_mode = val ? CHIP_4_PORT_MODE :
11033 if (CHIP_MODE_IS_4_PORT(bp))
11034 bp->pfid = (bp->pf_num >> 1); /* 0..3 */
11036 bp->pfid = (bp->pf_num & 0x6); /* 0, 2, 4, 6 */
11038 bp->common.chip_port_mode = CHIP_PORT_MODE_NONE; /* N/A */
11039 bp->pfid = bp->pf_num; /* 0..7 */
11042 BNX2X_DEV_INFO("pf_id: %x", bp->pfid);
11044 bp->link_params.chip_id = bp->common.chip_id;
11045 BNX2X_DEV_INFO("chip ID is 0x%x\n", id);
11047 val = (REG_RD(bp, 0x2874) & 0x55);
11048 if ((bp->common.chip_id & 0x1) ||
11049 (CHIP_IS_E1(bp) && val) || (CHIP_IS_E1H(bp) && (val == 0x55))) {
11050 bp->flags |= ONE_PORT_FLAG;
11051 BNX2X_DEV_INFO("single port device\n");
11054 val = REG_RD(bp, MCP_REG_MCPR_NVM_CFG4);
11055 bp->common.flash_size = (BNX2X_NVRAM_1MB_SIZE <<
11056 (val & MCPR_NVM_CFG4_FLASH_SIZE));
11057 BNX2X_DEV_INFO("flash_size 0x%x (%d)\n",
11058 bp->common.flash_size, bp->common.flash_size);
11060 bnx2x_init_shmem(bp);
11062 bp->common.shmem2_base = REG_RD(bp, (BP_PATH(bp) ?
11063 MISC_REG_GENERIC_CR_1 :
11064 MISC_REG_GENERIC_CR_0));
11066 bp->link_params.shmem_base = bp->common.shmem_base;
11067 bp->link_params.shmem2_base = bp->common.shmem2_base;
11068 if (SHMEM2_RD(bp, size) >
11069 (u32)offsetof(struct shmem2_region, lfa_host_addr[BP_PORT(bp)]))
11070 bp->link_params.lfa_base =
11071 REG_RD(bp, bp->common.shmem2_base +
11072 (u32)offsetof(struct shmem2_region,
11073 lfa_host_addr[BP_PORT(bp)]));
11075 bp->link_params.lfa_base = 0;
11076 BNX2X_DEV_INFO("shmem offset 0x%x shmem2 offset 0x%x\n",
11077 bp->common.shmem_base, bp->common.shmem2_base);
11079 if (!bp->common.shmem_base) {
11080 BNX2X_DEV_INFO("MCP not active\n");
11081 bp->flags |= NO_MCP_FLAG;
11085 bp->common.hw_config = SHMEM_RD(bp, dev_info.shared_hw_config.config);
11086 BNX2X_DEV_INFO("hw_config 0x%08x\n", bp->common.hw_config);
11088 bp->link_params.hw_led_mode = ((bp->common.hw_config &
11089 SHARED_HW_CFG_LED_MODE_MASK) >>
11090 SHARED_HW_CFG_LED_MODE_SHIFT);
11092 bp->link_params.feature_config_flags = 0;
11093 val = SHMEM_RD(bp, dev_info.shared_feature_config.config);
11094 if (val & SHARED_FEAT_CFG_OVERRIDE_PREEMPHASIS_CFG_ENABLED)
11095 bp->link_params.feature_config_flags |=
11096 FEATURE_CONFIG_OVERRIDE_PREEMPHASIS_ENABLED;
11098 bp->link_params.feature_config_flags &=
11099 ~FEATURE_CONFIG_OVERRIDE_PREEMPHASIS_ENABLED;
11101 val = SHMEM_RD(bp, dev_info.bc_rev) >> 8;
11102 bp->common.bc_ver = val;
11103 BNX2X_DEV_INFO("bc_ver %X\n", val);
11104 if (val < BNX2X_BC_VER) {
11105 /* for now only warn
11106 * later we might need to enforce this */
11107 BNX2X_ERR("This driver needs bc_ver %X but found %X, please upgrade BC\n",
11108 BNX2X_BC_VER, val);
11110 bp->link_params.feature_config_flags |=
11111 (val >= REQ_BC_VER_4_VRFY_FIRST_PHY_OPT_MDL) ?
11112 FEATURE_CONFIG_BC_SUPPORTS_OPT_MDL_VRFY : 0;
11114 bp->link_params.feature_config_flags |=
11115 (val >= REQ_BC_VER_4_VRFY_SPECIFIC_PHY_OPT_MDL) ?
11116 FEATURE_CONFIG_BC_SUPPORTS_DUAL_PHY_OPT_MDL_VRFY : 0;
11117 bp->link_params.feature_config_flags |=
11118 (val >= REQ_BC_VER_4_VRFY_AFEX_SUPPORTED) ?
11119 FEATURE_CONFIG_BC_SUPPORTS_AFEX : 0;
11120 bp->link_params.feature_config_flags |=
11121 (val >= REQ_BC_VER_4_SFP_TX_DISABLE_SUPPORTED) ?
11122 FEATURE_CONFIG_BC_SUPPORTS_SFP_TX_DISABLED : 0;
11124 bp->link_params.feature_config_flags |=
11125 (val >= REQ_BC_VER_4_MT_SUPPORTED) ?
11126 FEATURE_CONFIG_MT_SUPPORT : 0;
11128 bp->flags |= (val >= REQ_BC_VER_4_PFC_STATS_SUPPORTED) ?
11129 BC_SUPPORTS_PFC_STATS : 0;
11131 bp->flags |= (val >= REQ_BC_VER_4_FCOE_FEATURES) ?
11132 BC_SUPPORTS_FCOE_FEATURES : 0;
11134 bp->flags |= (val >= REQ_BC_VER_4_DCBX_ADMIN_MSG_NON_PMF) ?
11135 BC_SUPPORTS_DCBX_MSG_NON_PMF : 0;
11137 bp->flags |= (val >= REQ_BC_VER_4_RMMOD_CMD) ?
11138 BC_SUPPORTS_RMMOD_CMD : 0;
11140 boot_mode = SHMEM_RD(bp,
11141 dev_info.port_feature_config[BP_PORT(bp)].mba_config) &
11142 PORT_FEATURE_MBA_BOOT_AGENT_TYPE_MASK;
11143 switch (boot_mode) {
11144 case PORT_FEATURE_MBA_BOOT_AGENT_TYPE_PXE:
11145 bp->common.boot_mode = FEATURE_ETH_BOOTMODE_PXE;
11147 case PORT_FEATURE_MBA_BOOT_AGENT_TYPE_ISCSIB:
11148 bp->common.boot_mode = FEATURE_ETH_BOOTMODE_ISCSI;
11150 case PORT_FEATURE_MBA_BOOT_AGENT_TYPE_FCOE_BOOT:
11151 bp->common.boot_mode = FEATURE_ETH_BOOTMODE_FCOE;
11153 case PORT_FEATURE_MBA_BOOT_AGENT_TYPE_NONE:
11154 bp->common.boot_mode = FEATURE_ETH_BOOTMODE_NONE;
11158 pci_read_config_word(bp->pdev, bp->pdev->pm_cap + PCI_PM_PMC, &pmc);
11159 bp->flags |= (pmc & PCI_PM_CAP_PME_D3cold) ? 0 : NO_WOL_FLAG;
11161 BNX2X_DEV_INFO("%sWoL capable\n",
11162 (bp->flags & NO_WOL_FLAG) ? "not " : "");
11164 val = SHMEM_RD(bp, dev_info.shared_hw_config.part_num);
11165 val2 = SHMEM_RD(bp, dev_info.shared_hw_config.part_num[4]);
11166 val3 = SHMEM_RD(bp, dev_info.shared_hw_config.part_num[8]);
11167 val4 = SHMEM_RD(bp, dev_info.shared_hw_config.part_num[12]);
11169 dev_info(&bp->pdev->dev, "part number %X-%X-%X-%X\n",
11170 val, val2, val3, val4);
11173 #define IGU_FID(val) GET_FIELD((val), IGU_REG_MAPPING_MEMORY_FID)
11174 #define IGU_VEC(val) GET_FIELD((val), IGU_REG_MAPPING_MEMORY_VECTOR)
11176 static int bnx2x_get_igu_cam_info(struct bnx2x *bp)
11178 int pfid = BP_FUNC(bp);
11181 u8 fid, igu_sb_cnt = 0;
11183 bp->igu_base_sb = 0xff;
11184 if (CHIP_INT_MODE_IS_BC(bp)) {
11185 int vn = BP_VN(bp);
11186 igu_sb_cnt = bp->igu_sb_cnt;
11187 bp->igu_base_sb = (CHIP_MODE_IS_4_PORT(bp) ? pfid : vn) *
11190 bp->igu_dsb_id = E1HVN_MAX * FP_SB_MAX_E1x +
11191 (CHIP_MODE_IS_4_PORT(bp) ? pfid : vn);
11196 /* IGU in normal mode - read CAM */
11197 for (igu_sb_id = 0; igu_sb_id < IGU_REG_MAPPING_MEMORY_SIZE;
11199 val = REG_RD(bp, IGU_REG_MAPPING_MEMORY + igu_sb_id * 4);
11200 if (!(val & IGU_REG_MAPPING_MEMORY_VALID))
11202 fid = IGU_FID(val);
11203 if ((fid & IGU_FID_ENCODE_IS_PF)) {
11204 if ((fid & IGU_FID_PF_NUM_MASK) != pfid)
11206 if (IGU_VEC(val) == 0)
11207 /* default status block */
11208 bp->igu_dsb_id = igu_sb_id;
11210 if (bp->igu_base_sb == 0xff)
11211 bp->igu_base_sb = igu_sb_id;
11217 #ifdef CONFIG_PCI_MSI
11218 /* Due to new PF resource allocation by MFW T7.4 and above, it's
11219 * optional that number of CAM entries will not be equal to the value
11220 * advertised in PCI.
11221 * Driver should use the minimal value of both as the actual status
11224 bp->igu_sb_cnt = min_t(int, bp->igu_sb_cnt, igu_sb_cnt);
11227 if (igu_sb_cnt == 0) {
11228 BNX2X_ERR("CAM configuration error\n");
11235 static void bnx2x_link_settings_supported(struct bnx2x *bp, u32 switch_cfg)
11237 int cfg_size = 0, idx, port = BP_PORT(bp);
11239 /* Aggregation of supported attributes of all external phys */
11240 bp->port.supported[0] = 0;
11241 bp->port.supported[1] = 0;
11242 switch (bp->link_params.num_phys) {
11244 bp->port.supported[0] = bp->link_params.phy[INT_PHY].supported;
11248 bp->port.supported[0] = bp->link_params.phy[EXT_PHY1].supported;
11252 if (bp->link_params.multi_phy_config &
11253 PORT_HW_CFG_PHY_SWAPPED_ENABLED) {
11254 bp->port.supported[1] =
11255 bp->link_params.phy[EXT_PHY1].supported;
11256 bp->port.supported[0] =
11257 bp->link_params.phy[EXT_PHY2].supported;
11259 bp->port.supported[0] =
11260 bp->link_params.phy[EXT_PHY1].supported;
11261 bp->port.supported[1] =
11262 bp->link_params.phy[EXT_PHY2].supported;
11268 if (!(bp->port.supported[0] || bp->port.supported[1])) {
11269 BNX2X_ERR("NVRAM config error. BAD phy config. PHY1 config 0x%x, PHY2 config 0x%x\n",
11271 dev_info.port_hw_config[port].external_phy_config),
11273 dev_info.port_hw_config[port].external_phy_config2));
11277 if (CHIP_IS_E3(bp))
11278 bp->port.phy_addr = REG_RD(bp, MISC_REG_WC0_CTRL_PHY_ADDR);
11280 switch (switch_cfg) {
11281 case SWITCH_CFG_1G:
11282 bp->port.phy_addr = REG_RD(
11283 bp, NIG_REG_SERDES0_CTRL_PHY_ADDR + port*0x10);
11285 case SWITCH_CFG_10G:
11286 bp->port.phy_addr = REG_RD(
11287 bp, NIG_REG_XGXS0_CTRL_PHY_ADDR + port*0x18);
11290 BNX2X_ERR("BAD switch_cfg link_config 0x%x\n",
11291 bp->port.link_config[0]);
11295 BNX2X_DEV_INFO("phy_addr 0x%x\n", bp->port.phy_addr);
11296 /* mask what we support according to speed_cap_mask per configuration */
11297 for (idx = 0; idx < cfg_size; idx++) {
11298 if (!(bp->link_params.speed_cap_mask[idx] &
11299 PORT_HW_CFG_SPEED_CAPABILITY_D0_10M_HALF))
11300 bp->port.supported[idx] &= ~SUPPORTED_10baseT_Half;
11302 if (!(bp->link_params.speed_cap_mask[idx] &
11303 PORT_HW_CFG_SPEED_CAPABILITY_D0_10M_FULL))
11304 bp->port.supported[idx] &= ~SUPPORTED_10baseT_Full;
11306 if (!(bp->link_params.speed_cap_mask[idx] &
11307 PORT_HW_CFG_SPEED_CAPABILITY_D0_100M_HALF))
11308 bp->port.supported[idx] &= ~SUPPORTED_100baseT_Half;
11310 if (!(bp->link_params.speed_cap_mask[idx] &
11311 PORT_HW_CFG_SPEED_CAPABILITY_D0_100M_FULL))
11312 bp->port.supported[idx] &= ~SUPPORTED_100baseT_Full;
11314 if (!(bp->link_params.speed_cap_mask[idx] &
11315 PORT_HW_CFG_SPEED_CAPABILITY_D0_1G))
11316 bp->port.supported[idx] &= ~(SUPPORTED_1000baseT_Half |
11317 SUPPORTED_1000baseT_Full);
11319 if (!(bp->link_params.speed_cap_mask[idx] &
11320 PORT_HW_CFG_SPEED_CAPABILITY_D0_2_5G))
11321 bp->port.supported[idx] &= ~SUPPORTED_2500baseX_Full;
11323 if (!(bp->link_params.speed_cap_mask[idx] &
11324 PORT_HW_CFG_SPEED_CAPABILITY_D0_10G))
11325 bp->port.supported[idx] &= ~SUPPORTED_10000baseT_Full;
11327 if (!(bp->link_params.speed_cap_mask[idx] &
11328 PORT_HW_CFG_SPEED_CAPABILITY_D0_20G))
11329 bp->port.supported[idx] &= ~SUPPORTED_20000baseKR2_Full;
11332 BNX2X_DEV_INFO("supported 0x%x 0x%x\n", bp->port.supported[0],
11333 bp->port.supported[1]);
11336 static void bnx2x_link_settings_requested(struct bnx2x *bp)
11338 u32 link_config, idx, cfg_size = 0;
11339 bp->port.advertising[0] = 0;
11340 bp->port.advertising[1] = 0;
11341 switch (bp->link_params.num_phys) {
11350 for (idx = 0; idx < cfg_size; idx++) {
11351 bp->link_params.req_duplex[idx] = DUPLEX_FULL;
11352 link_config = bp->port.link_config[idx];
11353 switch (link_config & PORT_FEATURE_LINK_SPEED_MASK) {
11354 case PORT_FEATURE_LINK_SPEED_AUTO:
11355 if (bp->port.supported[idx] & SUPPORTED_Autoneg) {
11356 bp->link_params.req_line_speed[idx] =
11358 bp->port.advertising[idx] |=
11359 bp->port.supported[idx];
11360 if (bp->link_params.phy[EXT_PHY1].type ==
11361 PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM84833)
11362 bp->port.advertising[idx] |=
11363 (SUPPORTED_100baseT_Half |
11364 SUPPORTED_100baseT_Full);
11366 /* force 10G, no AN */
11367 bp->link_params.req_line_speed[idx] =
11369 bp->port.advertising[idx] |=
11370 (ADVERTISED_10000baseT_Full |
11376 case PORT_FEATURE_LINK_SPEED_10M_FULL:
11377 if (bp->port.supported[idx] & SUPPORTED_10baseT_Full) {
11378 bp->link_params.req_line_speed[idx] =
11380 bp->port.advertising[idx] |=
11381 (ADVERTISED_10baseT_Full |
11384 BNX2X_ERR("NVRAM config error. Invalid link_config 0x%x speed_cap_mask 0x%x\n",
11386 bp->link_params.speed_cap_mask[idx]);
11391 case PORT_FEATURE_LINK_SPEED_10M_HALF:
11392 if (bp->port.supported[idx] & SUPPORTED_10baseT_Half) {
11393 bp->link_params.req_line_speed[idx] =
11395 bp->link_params.req_duplex[idx] =
11397 bp->port.advertising[idx] |=
11398 (ADVERTISED_10baseT_Half |
11401 BNX2X_ERR("NVRAM config error. Invalid link_config 0x%x speed_cap_mask 0x%x\n",
11403 bp->link_params.speed_cap_mask[idx]);
11408 case PORT_FEATURE_LINK_SPEED_100M_FULL:
11409 if (bp->port.supported[idx] &
11410 SUPPORTED_100baseT_Full) {
11411 bp->link_params.req_line_speed[idx] =
11413 bp->port.advertising[idx] |=
11414 (ADVERTISED_100baseT_Full |
11417 BNX2X_ERR("NVRAM config error. Invalid link_config 0x%x speed_cap_mask 0x%x\n",
11419 bp->link_params.speed_cap_mask[idx]);
11424 case PORT_FEATURE_LINK_SPEED_100M_HALF:
11425 if (bp->port.supported[idx] &
11426 SUPPORTED_100baseT_Half) {
11427 bp->link_params.req_line_speed[idx] =
11429 bp->link_params.req_duplex[idx] =
11431 bp->port.advertising[idx] |=
11432 (ADVERTISED_100baseT_Half |
11435 BNX2X_ERR("NVRAM config error. Invalid link_config 0x%x speed_cap_mask 0x%x\n",
11437 bp->link_params.speed_cap_mask[idx]);
11442 case PORT_FEATURE_LINK_SPEED_1G:
11443 if (bp->port.supported[idx] &
11444 SUPPORTED_1000baseT_Full) {
11445 bp->link_params.req_line_speed[idx] =
11447 bp->port.advertising[idx] |=
11448 (ADVERTISED_1000baseT_Full |
11450 } else if (bp->port.supported[idx] &
11451 SUPPORTED_1000baseKX_Full) {
11452 bp->link_params.req_line_speed[idx] =
11454 bp->port.advertising[idx] |=
11455 ADVERTISED_1000baseKX_Full;
11457 BNX2X_ERR("NVRAM config error. Invalid link_config 0x%x speed_cap_mask 0x%x\n",
11459 bp->link_params.speed_cap_mask[idx]);
11464 case PORT_FEATURE_LINK_SPEED_2_5G:
11465 if (bp->port.supported[idx] &
11466 SUPPORTED_2500baseX_Full) {
11467 bp->link_params.req_line_speed[idx] =
11469 bp->port.advertising[idx] |=
11470 (ADVERTISED_2500baseX_Full |
11473 BNX2X_ERR("NVRAM config error. Invalid link_config 0x%x speed_cap_mask 0x%x\n",
11475 bp->link_params.speed_cap_mask[idx]);
11480 case PORT_FEATURE_LINK_SPEED_10G_CX4:
11481 if (bp->port.supported[idx] &
11482 SUPPORTED_10000baseT_Full) {
11483 bp->link_params.req_line_speed[idx] =
11485 bp->port.advertising[idx] |=
11486 (ADVERTISED_10000baseT_Full |
11488 } else if (bp->port.supported[idx] &
11489 SUPPORTED_10000baseKR_Full) {
11490 bp->link_params.req_line_speed[idx] =
11492 bp->port.advertising[idx] |=
11493 (ADVERTISED_10000baseKR_Full |
11496 BNX2X_ERR("NVRAM config error. Invalid link_config 0x%x speed_cap_mask 0x%x\n",
11498 bp->link_params.speed_cap_mask[idx]);
11502 case PORT_FEATURE_LINK_SPEED_20G:
11503 bp->link_params.req_line_speed[idx] = SPEED_20000;
11507 BNX2X_ERR("NVRAM config error. BAD link speed link_config 0x%x\n",
11509 bp->link_params.req_line_speed[idx] =
11511 bp->port.advertising[idx] =
11512 bp->port.supported[idx];
11516 bp->link_params.req_flow_ctrl[idx] = (link_config &
11517 PORT_FEATURE_FLOW_CONTROL_MASK);
11518 if (bp->link_params.req_flow_ctrl[idx] ==
11519 BNX2X_FLOW_CTRL_AUTO) {
11520 if (!(bp->port.supported[idx] & SUPPORTED_Autoneg))
11521 bp->link_params.req_flow_ctrl[idx] =
11522 BNX2X_FLOW_CTRL_NONE;
11524 bnx2x_set_requested_fc(bp);
11527 BNX2X_DEV_INFO("req_line_speed %d req_duplex %d req_flow_ctrl 0x%x advertising 0x%x\n",
11528 bp->link_params.req_line_speed[idx],
11529 bp->link_params.req_duplex[idx],
11530 bp->link_params.req_flow_ctrl[idx],
11531 bp->port.advertising[idx]);
11535 static void bnx2x_set_mac_buf(u8 *mac_buf, u32 mac_lo, u16 mac_hi)
11537 __be16 mac_hi_be = cpu_to_be16(mac_hi);
11538 __be32 mac_lo_be = cpu_to_be32(mac_lo);
11539 memcpy(mac_buf, &mac_hi_be, sizeof(mac_hi_be));
11540 memcpy(mac_buf + sizeof(mac_hi_be), &mac_lo_be, sizeof(mac_lo_be));
11543 static void bnx2x_get_port_hwinfo(struct bnx2x *bp)
11545 int port = BP_PORT(bp);
11547 u32 ext_phy_type, ext_phy_config, eee_mode;
11549 bp->link_params.bp = bp;
11550 bp->link_params.port = port;
11552 bp->link_params.lane_config =
11553 SHMEM_RD(bp, dev_info.port_hw_config[port].lane_config);
11555 bp->link_params.speed_cap_mask[0] =
11557 dev_info.port_hw_config[port].speed_capability_mask) &
11558 PORT_HW_CFG_SPEED_CAPABILITY_D0_MASK;
11559 bp->link_params.speed_cap_mask[1] =
11561 dev_info.port_hw_config[port].speed_capability_mask2) &
11562 PORT_HW_CFG_SPEED_CAPABILITY_D0_MASK;
11563 bp->port.link_config[0] =
11564 SHMEM_RD(bp, dev_info.port_feature_config[port].link_config);
11566 bp->port.link_config[1] =
11567 SHMEM_RD(bp, dev_info.port_feature_config[port].link_config2);
11569 bp->link_params.multi_phy_config =
11570 SHMEM_RD(bp, dev_info.port_hw_config[port].multi_phy_config);
11571 /* If the device is capable of WoL, set the default state according
11574 config = SHMEM_RD(bp, dev_info.port_feature_config[port].config);
11575 bp->wol = (!(bp->flags & NO_WOL_FLAG) &&
11576 (config & PORT_FEATURE_WOL_ENABLED));
11578 if ((config & PORT_FEAT_CFG_STORAGE_PERSONALITY_MASK) ==
11579 PORT_FEAT_CFG_STORAGE_PERSONALITY_FCOE && !IS_MF(bp))
11580 bp->flags |= NO_ISCSI_FLAG;
11581 if ((config & PORT_FEAT_CFG_STORAGE_PERSONALITY_MASK) ==
11582 PORT_FEAT_CFG_STORAGE_PERSONALITY_ISCSI && !(IS_MF(bp)))
11583 bp->flags |= NO_FCOE_FLAG;
11585 BNX2X_DEV_INFO("lane_config 0x%08x speed_cap_mask0 0x%08x link_config0 0x%08x\n",
11586 bp->link_params.lane_config,
11587 bp->link_params.speed_cap_mask[0],
11588 bp->port.link_config[0]);
11590 bp->link_params.switch_cfg = (bp->port.link_config[0] &
11591 PORT_FEATURE_CONNECTED_SWITCH_MASK);
11592 bnx2x_phy_probe(&bp->link_params);
11593 bnx2x_link_settings_supported(bp, bp->link_params.switch_cfg);
11595 bnx2x_link_settings_requested(bp);
11598 * If connected directly, work with the internal PHY, otherwise, work
11599 * with the external PHY
11603 dev_info.port_hw_config[port].external_phy_config);
11604 ext_phy_type = XGXS_EXT_PHY_TYPE(ext_phy_config);
11605 if (ext_phy_type == PORT_HW_CFG_XGXS_EXT_PHY_TYPE_DIRECT)
11606 bp->mdio.prtad = bp->port.phy_addr;
11608 else if ((ext_phy_type != PORT_HW_CFG_XGXS_EXT_PHY_TYPE_FAILURE) &&
11609 (ext_phy_type != PORT_HW_CFG_XGXS_EXT_PHY_TYPE_NOT_CONN))
11611 XGXS_EXT_PHY_ADDR(ext_phy_config);
11613 /* Configure link feature according to nvram value */
11614 eee_mode = (((SHMEM_RD(bp, dev_info.
11615 port_feature_config[port].eee_power_mode)) &
11616 PORT_FEAT_CFG_EEE_POWER_MODE_MASK) >>
11617 PORT_FEAT_CFG_EEE_POWER_MODE_SHIFT);
11618 if (eee_mode != PORT_FEAT_CFG_EEE_POWER_MODE_DISABLED) {
11619 bp->link_params.eee_mode = EEE_MODE_ADV_LPI |
11620 EEE_MODE_ENABLE_LPI |
11621 EEE_MODE_OUTPUT_TIME;
11623 bp->link_params.eee_mode = 0;
11627 void bnx2x_get_iscsi_info(struct bnx2x *bp)
11629 u32 no_flags = NO_ISCSI_FLAG;
11630 int port = BP_PORT(bp);
11631 u32 max_iscsi_conn = FW_ENCODE_32BIT_PATTERN ^ SHMEM_RD(bp,
11632 drv_lic_key[port].max_iscsi_conn);
11634 if (!CNIC_SUPPORT(bp)) {
11635 bp->flags |= no_flags;
11639 /* Get the number of maximum allowed iSCSI connections */
11640 bp->cnic_eth_dev.max_iscsi_conn =
11641 (max_iscsi_conn & BNX2X_MAX_ISCSI_INIT_CONN_MASK) >>
11642 BNX2X_MAX_ISCSI_INIT_CONN_SHIFT;
11644 BNX2X_DEV_INFO("max_iscsi_conn 0x%x\n",
11645 bp->cnic_eth_dev.max_iscsi_conn);
11648 * If maximum allowed number of connections is zero -
11649 * disable the feature.
11651 if (!bp->cnic_eth_dev.max_iscsi_conn)
11652 bp->flags |= no_flags;
11655 static void bnx2x_get_ext_wwn_info(struct bnx2x *bp, int func)
11658 bp->cnic_eth_dev.fcoe_wwn_port_name_hi =
11659 MF_CFG_RD(bp, func_ext_config[func].fcoe_wwn_port_name_upper);
11660 bp->cnic_eth_dev.fcoe_wwn_port_name_lo =
11661 MF_CFG_RD(bp, func_ext_config[func].fcoe_wwn_port_name_lower);
11664 bp->cnic_eth_dev.fcoe_wwn_node_name_hi =
11665 MF_CFG_RD(bp, func_ext_config[func].fcoe_wwn_node_name_upper);
11666 bp->cnic_eth_dev.fcoe_wwn_node_name_lo =
11667 MF_CFG_RD(bp, func_ext_config[func].fcoe_wwn_node_name_lower);
11670 static int bnx2x_shared_fcoe_funcs(struct bnx2x *bp)
11677 /* iterate over absolute function ids for this path: */
11678 for (fid = BP_PATH(bp); fid < E2_FUNC_MAX * 2; fid += 2) {
11679 if (IS_MF_SD(bp)) {
11680 u32 cfg = MF_CFG_RD(bp,
11681 func_mf_config[fid].config);
11683 if (!(cfg & FUNC_MF_CFG_FUNC_HIDE) &&
11684 ((cfg & FUNC_MF_CFG_PROTOCOL_MASK) ==
11685 FUNC_MF_CFG_PROTOCOL_FCOE))
11688 u32 cfg = MF_CFG_RD(bp,
11689 func_ext_config[fid].
11692 if ((cfg & MACP_FUNC_CFG_FLAGS_ENABLED) &&
11693 (cfg & MACP_FUNC_CFG_FLAGS_FCOE_OFFLOAD))
11698 int port, port_cnt = CHIP_MODE_IS_4_PORT(bp) ? 2 : 1;
11700 for (port = 0; port < port_cnt; port++) {
11701 u32 lic = SHMEM_RD(bp,
11702 drv_lic_key[port].max_fcoe_conn) ^
11703 FW_ENCODE_32BIT_PATTERN;
11712 static void bnx2x_get_fcoe_info(struct bnx2x *bp)
11714 int port = BP_PORT(bp);
11715 int func = BP_ABS_FUNC(bp);
11716 u32 max_fcoe_conn = FW_ENCODE_32BIT_PATTERN ^ SHMEM_RD(bp,
11717 drv_lic_key[port].max_fcoe_conn);
11718 u8 num_fcoe_func = bnx2x_shared_fcoe_funcs(bp);
11720 if (!CNIC_SUPPORT(bp)) {
11721 bp->flags |= NO_FCOE_FLAG;
11725 /* Get the number of maximum allowed FCoE connections */
11726 bp->cnic_eth_dev.max_fcoe_conn =
11727 (max_fcoe_conn & BNX2X_MAX_FCOE_INIT_CONN_MASK) >>
11728 BNX2X_MAX_FCOE_INIT_CONN_SHIFT;
11730 /* Calculate the number of maximum allowed FCoE tasks */
11731 bp->cnic_eth_dev.max_fcoe_exchanges = MAX_NUM_FCOE_TASKS_PER_ENGINE;
11733 /* check if FCoE resources must be shared between different functions */
11735 bp->cnic_eth_dev.max_fcoe_exchanges /= num_fcoe_func;
11737 /* Read the WWN: */
11740 bp->cnic_eth_dev.fcoe_wwn_port_name_hi =
11742 dev_info.port_hw_config[port].
11743 fcoe_wwn_port_name_upper);
11744 bp->cnic_eth_dev.fcoe_wwn_port_name_lo =
11746 dev_info.port_hw_config[port].
11747 fcoe_wwn_port_name_lower);
11750 bp->cnic_eth_dev.fcoe_wwn_node_name_hi =
11752 dev_info.port_hw_config[port].
11753 fcoe_wwn_node_name_upper);
11754 bp->cnic_eth_dev.fcoe_wwn_node_name_lo =
11756 dev_info.port_hw_config[port].
11757 fcoe_wwn_node_name_lower);
11758 } else if (!IS_MF_SD(bp)) {
11759 /* Read the WWN info only if the FCoE feature is enabled for
11762 if (BNX2X_HAS_MF_EXT_PROTOCOL_FCOE(bp))
11763 bnx2x_get_ext_wwn_info(bp, func);
11765 if (BNX2X_IS_MF_SD_PROTOCOL_FCOE(bp) && !CHIP_IS_E1x(bp))
11766 bnx2x_get_ext_wwn_info(bp, func);
11769 BNX2X_DEV_INFO("max_fcoe_conn 0x%x\n", bp->cnic_eth_dev.max_fcoe_conn);
11772 * If maximum allowed number of connections is zero -
11773 * disable the feature.
11775 if (!bp->cnic_eth_dev.max_fcoe_conn) {
11776 bp->flags |= NO_FCOE_FLAG;
11777 eth_zero_addr(bp->fip_mac);
11781 static void bnx2x_get_cnic_info(struct bnx2x *bp)
11784 * iSCSI may be dynamically disabled but reading
11785 * info here we will decrease memory usage by driver
11786 * if the feature is disabled for good
11788 bnx2x_get_iscsi_info(bp);
11789 bnx2x_get_fcoe_info(bp);
11792 static void bnx2x_get_cnic_mac_hwinfo(struct bnx2x *bp)
11795 int func = BP_ABS_FUNC(bp);
11796 int port = BP_PORT(bp);
11797 u8 *iscsi_mac = bp->cnic_eth_dev.iscsi_mac;
11798 u8 *fip_mac = bp->fip_mac;
11801 /* iSCSI and FCoE NPAR MACs: if there is no either iSCSI or
11802 * FCoE MAC then the appropriate feature should be disabled.
11803 * In non SD mode features configuration comes from struct
11806 if (!IS_MF_SD(bp)) {
11807 u32 cfg = MF_CFG_RD(bp, func_ext_config[func].func_cfg);
11808 if (cfg & MACP_FUNC_CFG_FLAGS_ISCSI_OFFLOAD) {
11809 val2 = MF_CFG_RD(bp, func_ext_config[func].
11810 iscsi_mac_addr_upper);
11811 val = MF_CFG_RD(bp, func_ext_config[func].
11812 iscsi_mac_addr_lower);
11813 bnx2x_set_mac_buf(iscsi_mac, val, val2);
11815 ("Read iSCSI MAC: %pM\n", iscsi_mac);
11817 bp->flags |= NO_ISCSI_OOO_FLAG | NO_ISCSI_FLAG;
11820 if (cfg & MACP_FUNC_CFG_FLAGS_FCOE_OFFLOAD) {
11821 val2 = MF_CFG_RD(bp, func_ext_config[func].
11822 fcoe_mac_addr_upper);
11823 val = MF_CFG_RD(bp, func_ext_config[func].
11824 fcoe_mac_addr_lower);
11825 bnx2x_set_mac_buf(fip_mac, val, val2);
11827 ("Read FCoE L2 MAC: %pM\n", fip_mac);
11829 bp->flags |= NO_FCOE_FLAG;
11832 bp->mf_ext_config = cfg;
11834 } else { /* SD MODE */
11835 if (BNX2X_IS_MF_SD_PROTOCOL_ISCSI(bp)) {
11836 /* use primary mac as iscsi mac */
11837 memcpy(iscsi_mac, bp->dev->dev_addr, ETH_ALEN);
11839 BNX2X_DEV_INFO("SD ISCSI MODE\n");
11841 ("Read iSCSI MAC: %pM\n", iscsi_mac);
11842 } else if (BNX2X_IS_MF_SD_PROTOCOL_FCOE(bp)) {
11843 /* use primary mac as fip mac */
11844 memcpy(fip_mac, bp->dev->dev_addr, ETH_ALEN);
11845 BNX2X_DEV_INFO("SD FCoE MODE\n");
11847 ("Read FIP MAC: %pM\n", fip_mac);
11851 /* If this is a storage-only interface, use SAN mac as
11852 * primary MAC. Notice that for SD this is already the case,
11853 * as the SAN mac was copied from the primary MAC.
11855 if (IS_MF_FCOE_AFEX(bp))
11856 memcpy(bp->dev->dev_addr, fip_mac, ETH_ALEN);
11858 val2 = SHMEM_RD(bp, dev_info.port_hw_config[port].
11860 val = SHMEM_RD(bp, dev_info.port_hw_config[port].
11862 bnx2x_set_mac_buf(iscsi_mac, val, val2);
11864 val2 = SHMEM_RD(bp, dev_info.port_hw_config[port].
11865 fcoe_fip_mac_upper);
11866 val = SHMEM_RD(bp, dev_info.port_hw_config[port].
11867 fcoe_fip_mac_lower);
11868 bnx2x_set_mac_buf(fip_mac, val, val2);
11871 /* Disable iSCSI OOO if MAC configuration is invalid. */
11872 if (!is_valid_ether_addr(iscsi_mac)) {
11873 bp->flags |= NO_ISCSI_OOO_FLAG | NO_ISCSI_FLAG;
11874 eth_zero_addr(iscsi_mac);
11877 /* Disable FCoE if MAC configuration is invalid. */
11878 if (!is_valid_ether_addr(fip_mac)) {
11879 bp->flags |= NO_FCOE_FLAG;
11880 eth_zero_addr(bp->fip_mac);
11884 static void bnx2x_get_mac_hwinfo(struct bnx2x *bp)
11887 int func = BP_ABS_FUNC(bp);
11888 int port = BP_PORT(bp);
11890 /* Zero primary MAC configuration */
11891 eth_zero_addr(bp->dev->dev_addr);
11893 if (BP_NOMCP(bp)) {
11894 BNX2X_ERROR("warning: random MAC workaround active\n");
11895 eth_hw_addr_random(bp->dev);
11896 } else if (IS_MF(bp)) {
11897 val2 = MF_CFG_RD(bp, func_mf_config[func].mac_upper);
11898 val = MF_CFG_RD(bp, func_mf_config[func].mac_lower);
11899 if ((val2 != FUNC_MF_CFG_UPPERMAC_DEFAULT) &&
11900 (val != FUNC_MF_CFG_LOWERMAC_DEFAULT))
11901 bnx2x_set_mac_buf(bp->dev->dev_addr, val, val2);
11903 if (CNIC_SUPPORT(bp))
11904 bnx2x_get_cnic_mac_hwinfo(bp);
11906 /* in SF read MACs from port configuration */
11907 val2 = SHMEM_RD(bp, dev_info.port_hw_config[port].mac_upper);
11908 val = SHMEM_RD(bp, dev_info.port_hw_config[port].mac_lower);
11909 bnx2x_set_mac_buf(bp->dev->dev_addr, val, val2);
11911 if (CNIC_SUPPORT(bp))
11912 bnx2x_get_cnic_mac_hwinfo(bp);
11915 if (!BP_NOMCP(bp)) {
11916 /* Read physical port identifier from shmem */
11917 val2 = SHMEM_RD(bp, dev_info.port_hw_config[port].mac_upper);
11918 val = SHMEM_RD(bp, dev_info.port_hw_config[port].mac_lower);
11919 bnx2x_set_mac_buf(bp->phys_port_id, val, val2);
11920 bp->flags |= HAS_PHYS_PORT_ID;
11923 memcpy(bp->link_params.mac_addr, bp->dev->dev_addr, ETH_ALEN);
11925 if (!is_valid_ether_addr(bp->dev->dev_addr))
11926 dev_err(&bp->pdev->dev,
11927 "bad Ethernet MAC address configuration: %pM\n"
11928 "change it manually before bringing up the appropriate network interface\n",
11929 bp->dev->dev_addr);
11932 static bool bnx2x_get_dropless_info(struct bnx2x *bp)
11940 if (IS_MF(bp) && !CHIP_IS_E1x(bp)) {
11941 /* Take function: tmp = func */
11942 tmp = BP_ABS_FUNC(bp);
11943 cfg = MF_CFG_RD(bp, func_ext_config[tmp].func_cfg);
11944 cfg = !!(cfg & MACP_FUNC_CFG_PAUSE_ON_HOST_RING);
11946 /* Take port: tmp = port */
11949 dev_info.port_hw_config[tmp].generic_features);
11950 cfg = !!(cfg & PORT_HW_CFG_PAUSE_ON_HOST_RING_ENABLED);
11955 static void validate_set_si_mode(struct bnx2x *bp)
11957 u8 func = BP_ABS_FUNC(bp);
11960 val = MF_CFG_RD(bp, func_mf_config[func].mac_upper);
11962 /* check for legal mac (upper bytes) */
11963 if (val != 0xffff) {
11964 bp->mf_mode = MULTI_FUNCTION_SI;
11965 bp->mf_config[BP_VN(bp)] =
11966 MF_CFG_RD(bp, func_mf_config[func].config);
11968 BNX2X_DEV_INFO("illegal MAC address for SI\n");
11971 static int bnx2x_get_hwinfo(struct bnx2x *bp)
11973 int /*abs*/func = BP_ABS_FUNC(bp);
11975 u32 val = 0, val2 = 0;
11978 /* Validate that chip access is feasible */
11979 if (REG_RD(bp, MISC_REG_CHIP_NUM) == 0xffffffff) {
11980 dev_err(&bp->pdev->dev,
11981 "Chip read returns all Fs. Preventing probe from continuing\n");
11985 bnx2x_get_common_hwinfo(bp);
11988 * initialize IGU parameters
11990 if (CHIP_IS_E1x(bp)) {
11991 bp->common.int_block = INT_BLOCK_HC;
11993 bp->igu_dsb_id = DEF_SB_IGU_ID;
11994 bp->igu_base_sb = 0;
11996 bp->common.int_block = INT_BLOCK_IGU;
11998 /* do not allow device reset during IGU info processing */
11999 bnx2x_acquire_hw_lock(bp, HW_LOCK_RESOURCE_RESET);
12001 val = REG_RD(bp, IGU_REG_BLOCK_CONFIGURATION);
12003 if (val & IGU_BLOCK_CONFIGURATION_REG_BACKWARD_COMP_EN) {
12006 BNX2X_DEV_INFO("FORCING Normal Mode\n");
12008 val &= ~(IGU_BLOCK_CONFIGURATION_REG_BACKWARD_COMP_EN);
12009 REG_WR(bp, IGU_REG_BLOCK_CONFIGURATION, val);
12010 REG_WR(bp, IGU_REG_RESET_MEMORIES, 0x7f);
12012 while (tout && REG_RD(bp, IGU_REG_RESET_MEMORIES)) {
12014 usleep_range(1000, 2000);
12017 if (REG_RD(bp, IGU_REG_RESET_MEMORIES)) {
12018 dev_err(&bp->pdev->dev,
12019 "FORCING Normal Mode failed!!!\n");
12020 bnx2x_release_hw_lock(bp,
12021 HW_LOCK_RESOURCE_RESET);
12026 if (val & IGU_BLOCK_CONFIGURATION_REG_BACKWARD_COMP_EN) {
12027 BNX2X_DEV_INFO("IGU Backward Compatible Mode\n");
12028 bp->common.int_block |= INT_BLOCK_MODE_BW_COMP;
12030 BNX2X_DEV_INFO("IGU Normal Mode\n");
12032 rc = bnx2x_get_igu_cam_info(bp);
12033 bnx2x_release_hw_lock(bp, HW_LOCK_RESOURCE_RESET);
12039 * set base FW non-default (fast path) status block id, this value is
12040 * used to initialize the fw_sb_id saved on the fp/queue structure to
12041 * determine the id used by the FW.
12043 if (CHIP_IS_E1x(bp))
12044 bp->base_fw_ndsb = BP_PORT(bp) * FP_SB_MAX_E1x + BP_L_ID(bp);
12046 * 57712 - we currently use one FW SB per IGU SB (Rx and Tx of
12047 * the same queue are indicated on the same IGU SB). So we prefer
12048 * FW and IGU SBs to be the same value.
12050 bp->base_fw_ndsb = bp->igu_base_sb;
12052 BNX2X_DEV_INFO("igu_dsb_id %d igu_base_sb %d igu_sb_cnt %d\n"
12053 "base_fw_ndsb %d\n", bp->igu_dsb_id, bp->igu_base_sb,
12054 bp->igu_sb_cnt, bp->base_fw_ndsb);
12057 * Initialize MF configuration
12061 bp->mf_sub_mode = 0;
12064 if (!CHIP_IS_E1(bp) && !BP_NOMCP(bp)) {
12065 BNX2X_DEV_INFO("shmem2base 0x%x, size %d, mfcfg offset %d\n",
12066 bp->common.shmem2_base, SHMEM2_RD(bp, size),
12067 (u32)offsetof(struct shmem2_region, mf_cfg_addr));
12069 if (SHMEM2_HAS(bp, mf_cfg_addr))
12070 bp->common.mf_cfg_base = SHMEM2_RD(bp, mf_cfg_addr);
12072 bp->common.mf_cfg_base = bp->common.shmem_base +
12073 offsetof(struct shmem_region, func_mb) +
12074 E1H_FUNC_MAX * sizeof(struct drv_func_mb);
12076 * get mf configuration:
12077 * 1. Existence of MF configuration
12078 * 2. MAC address must be legal (check only upper bytes)
12079 * for Switch-Independent mode;
12080 * OVLAN must be legal for Switch-Dependent mode
12081 * 3. SF_MODE configures specific MF mode
12083 if (bp->common.mf_cfg_base != SHMEM_MF_CFG_ADDR_NONE) {
12084 /* get mf configuration */
12086 dev_info.shared_feature_config.config);
12087 val &= SHARED_FEAT_CFG_FORCE_SF_MODE_MASK;
12090 case SHARED_FEAT_CFG_FORCE_SF_MODE_SWITCH_INDEPT:
12091 validate_set_si_mode(bp);
12093 case SHARED_FEAT_CFG_FORCE_SF_MODE_AFEX_MODE:
12094 if ((!CHIP_IS_E1x(bp)) &&
12095 (MF_CFG_RD(bp, func_mf_config[func].
12096 mac_upper) != 0xffff) &&
12098 afex_driver_support))) {
12099 bp->mf_mode = MULTI_FUNCTION_AFEX;
12100 bp->mf_config[vn] = MF_CFG_RD(bp,
12101 func_mf_config[func].config);
12103 BNX2X_DEV_INFO("can not configure afex mode\n");
12106 case SHARED_FEAT_CFG_FORCE_SF_MODE_MF_ALLOWED:
12107 /* get OV configuration */
12108 val = MF_CFG_RD(bp,
12109 func_mf_config[FUNC_0].e1hov_tag);
12110 val &= FUNC_MF_CFG_E1HOV_TAG_MASK;
12112 if (val != FUNC_MF_CFG_E1HOV_TAG_DEFAULT) {
12113 bp->mf_mode = MULTI_FUNCTION_SD;
12114 bp->mf_config[vn] = MF_CFG_RD(bp,
12115 func_mf_config[func].config);
12117 BNX2X_DEV_INFO("illegal OV for SD\n");
12119 case SHARED_FEAT_CFG_FORCE_SF_MODE_BD_MODE:
12120 bp->mf_mode = MULTI_FUNCTION_SD;
12121 bp->mf_sub_mode = SUB_MF_MODE_BD;
12122 bp->mf_config[vn] =
12124 func_mf_config[func].config);
12126 if (SHMEM2_HAS(bp, mtu_size)) {
12127 int mtu_idx = BP_FW_MB_IDX(bp);
12131 mtu = SHMEM2_RD(bp, mtu_size[mtu_idx]);
12132 mtu_size = (u16)mtu;
12133 DP(NETIF_MSG_IFUP, "Read MTU size %04x [%08x]\n",
12136 /* if valid: update device mtu */
12137 if ((mtu_size >= ETH_MIN_PACKET_SIZE) &&
12139 ETH_MAX_JUMBO_PACKET_SIZE))
12140 bp->dev->mtu = mtu_size;
12143 case SHARED_FEAT_CFG_FORCE_SF_MODE_UFP_MODE:
12144 bp->mf_mode = MULTI_FUNCTION_SD;
12145 bp->mf_sub_mode = SUB_MF_MODE_UFP;
12146 bp->mf_config[vn] =
12148 func_mf_config[func].config);
12150 case SHARED_FEAT_CFG_FORCE_SF_MODE_FORCED_SF:
12151 bp->mf_config[vn] = 0;
12153 case SHARED_FEAT_CFG_FORCE_SF_MODE_EXTENDED_MODE:
12154 val2 = SHMEM_RD(bp,
12155 dev_info.shared_hw_config.config_3);
12156 val2 &= SHARED_HW_CFG_EXTENDED_MF_MODE_MASK;
12158 case SHARED_HW_CFG_EXTENDED_MF_MODE_NPAR1_DOT_5:
12159 validate_set_si_mode(bp);
12161 SUB_MF_MODE_NPAR1_DOT_5;
12164 /* Unknown configuration */
12165 bp->mf_config[vn] = 0;
12166 BNX2X_DEV_INFO("unknown extended MF mode 0x%x\n",
12171 /* Unknown configuration: reset mf_config */
12172 bp->mf_config[vn] = 0;
12173 BNX2X_DEV_INFO("unknown MF mode 0x%x\n", val);
12177 BNX2X_DEV_INFO("%s function mode\n",
12178 IS_MF(bp) ? "multi" : "single");
12180 switch (bp->mf_mode) {
12181 case MULTI_FUNCTION_SD:
12182 val = MF_CFG_RD(bp, func_mf_config[func].e1hov_tag) &
12183 FUNC_MF_CFG_E1HOV_TAG_MASK;
12184 if (val != FUNC_MF_CFG_E1HOV_TAG_DEFAULT) {
12186 bp->path_has_ovlan = true;
12188 BNX2X_DEV_INFO("MF OV for func %d is %d (0x%04x)\n",
12189 func, bp->mf_ov, bp->mf_ov);
12190 } else if ((bp->mf_sub_mode == SUB_MF_MODE_UFP) ||
12191 (bp->mf_sub_mode == SUB_MF_MODE_BD)) {
12192 dev_err(&bp->pdev->dev,
12193 "Unexpected - no valid MF OV for func %d in UFP/BD mode\n",
12195 bp->path_has_ovlan = true;
12197 dev_err(&bp->pdev->dev,
12198 "No valid MF OV for func %d, aborting\n",
12203 case MULTI_FUNCTION_AFEX:
12204 BNX2X_DEV_INFO("func %d is in MF afex mode\n", func);
12206 case MULTI_FUNCTION_SI:
12207 BNX2X_DEV_INFO("func %d is in MF switch-independent mode\n",
12212 dev_err(&bp->pdev->dev,
12213 "VN %d is in a single function mode, aborting\n",
12220 /* check if other port on the path needs ovlan:
12221 * Since MF configuration is shared between ports
12222 * Possible mixed modes are only
12223 * {SF, SI} {SF, SD} {SD, SF} {SI, SF}
12225 if (CHIP_MODE_IS_4_PORT(bp) &&
12226 !bp->path_has_ovlan &&
12228 bp->common.mf_cfg_base != SHMEM_MF_CFG_ADDR_NONE) {
12229 u8 other_port = !BP_PORT(bp);
12230 u8 other_func = BP_PATH(bp) + 2*other_port;
12231 val = MF_CFG_RD(bp,
12232 func_mf_config[other_func].e1hov_tag);
12233 if (val != FUNC_MF_CFG_E1HOV_TAG_DEFAULT)
12234 bp->path_has_ovlan = true;
12238 /* adjust igu_sb_cnt to MF for E1H */
12239 if (CHIP_IS_E1H(bp) && IS_MF(bp))
12240 bp->igu_sb_cnt = min_t(u8, bp->igu_sb_cnt, E1H_MAX_MF_SB_COUNT);
12243 bnx2x_get_port_hwinfo(bp);
12245 /* Get MAC addresses */
12246 bnx2x_get_mac_hwinfo(bp);
12248 bnx2x_get_cnic_info(bp);
12253 static void bnx2x_read_fwinfo(struct bnx2x *bp)
12255 int cnt, i, block_end, rodi;
12256 char vpd_start[BNX2X_VPD_LEN+1];
12257 char str_id_reg[VENDOR_ID_LEN+1];
12258 char str_id_cap[VENDOR_ID_LEN+1];
12260 char *vpd_extended_data = NULL;
12263 cnt = pci_read_vpd(bp->pdev, 0, BNX2X_VPD_LEN, vpd_start);
12264 memset(bp->fw_ver, 0, sizeof(bp->fw_ver));
12266 if (cnt < BNX2X_VPD_LEN)
12267 goto out_not_found;
12269 /* VPD RO tag should be first tag after identifier string, hence
12270 * we should be able to find it in first BNX2X_VPD_LEN chars
12272 i = pci_vpd_find_tag(vpd_start, 0, BNX2X_VPD_LEN,
12273 PCI_VPD_LRDT_RO_DATA);
12275 goto out_not_found;
12277 block_end = i + PCI_VPD_LRDT_TAG_SIZE +
12278 pci_vpd_lrdt_size(&vpd_start[i]);
12280 i += PCI_VPD_LRDT_TAG_SIZE;
12282 if (block_end > BNX2X_VPD_LEN) {
12283 vpd_extended_data = kmalloc(block_end, GFP_KERNEL);
12284 if (vpd_extended_data == NULL)
12285 goto out_not_found;
12287 /* read rest of vpd image into vpd_extended_data */
12288 memcpy(vpd_extended_data, vpd_start, BNX2X_VPD_LEN);
12289 cnt = pci_read_vpd(bp->pdev, BNX2X_VPD_LEN,
12290 block_end - BNX2X_VPD_LEN,
12291 vpd_extended_data + BNX2X_VPD_LEN);
12292 if (cnt < (block_end - BNX2X_VPD_LEN))
12293 goto out_not_found;
12294 vpd_data = vpd_extended_data;
12296 vpd_data = vpd_start;
12298 /* now vpd_data holds full vpd content in both cases */
12300 rodi = pci_vpd_find_info_keyword(vpd_data, i, block_end,
12301 PCI_VPD_RO_KEYWORD_MFR_ID);
12303 goto out_not_found;
12305 len = pci_vpd_info_field_size(&vpd_data[rodi]);
12307 if (len != VENDOR_ID_LEN)
12308 goto out_not_found;
12310 rodi += PCI_VPD_INFO_FLD_HDR_SIZE;
12312 /* vendor specific info */
12313 snprintf(str_id_reg, VENDOR_ID_LEN + 1, "%04x", PCI_VENDOR_ID_DELL);
12314 snprintf(str_id_cap, VENDOR_ID_LEN + 1, "%04X", PCI_VENDOR_ID_DELL);
12315 if (!strncmp(str_id_reg, &vpd_data[rodi], VENDOR_ID_LEN) ||
12316 !strncmp(str_id_cap, &vpd_data[rodi], VENDOR_ID_LEN)) {
12318 rodi = pci_vpd_find_info_keyword(vpd_data, i, block_end,
12319 PCI_VPD_RO_KEYWORD_VENDOR0);
12321 len = pci_vpd_info_field_size(&vpd_data[rodi]);
12323 rodi += PCI_VPD_INFO_FLD_HDR_SIZE;
12325 if (len < 32 && (len + rodi) <= BNX2X_VPD_LEN) {
12326 memcpy(bp->fw_ver, &vpd_data[rodi], len);
12327 bp->fw_ver[len] = ' ';
12330 kfree(vpd_extended_data);
12334 kfree(vpd_extended_data);
12338 static void bnx2x_set_modes_bitmap(struct bnx2x *bp)
12342 if (CHIP_REV_IS_FPGA(bp))
12343 SET_FLAGS(flags, MODE_FPGA);
12344 else if (CHIP_REV_IS_EMUL(bp))
12345 SET_FLAGS(flags, MODE_EMUL);
12347 SET_FLAGS(flags, MODE_ASIC);
12349 if (CHIP_MODE_IS_4_PORT(bp))
12350 SET_FLAGS(flags, MODE_PORT4);
12352 SET_FLAGS(flags, MODE_PORT2);
12354 if (CHIP_IS_E2(bp))
12355 SET_FLAGS(flags, MODE_E2);
12356 else if (CHIP_IS_E3(bp)) {
12357 SET_FLAGS(flags, MODE_E3);
12358 if (CHIP_REV(bp) == CHIP_REV_Ax)
12359 SET_FLAGS(flags, MODE_E3_A0);
12360 else /*if (CHIP_REV(bp) == CHIP_REV_Bx)*/
12361 SET_FLAGS(flags, MODE_E3_B0 | MODE_COS3);
12365 SET_FLAGS(flags, MODE_MF);
12366 switch (bp->mf_mode) {
12367 case MULTI_FUNCTION_SD:
12368 SET_FLAGS(flags, MODE_MF_SD);
12370 case MULTI_FUNCTION_SI:
12371 SET_FLAGS(flags, MODE_MF_SI);
12373 case MULTI_FUNCTION_AFEX:
12374 SET_FLAGS(flags, MODE_MF_AFEX);
12378 SET_FLAGS(flags, MODE_SF);
12380 #if defined(__LITTLE_ENDIAN)
12381 SET_FLAGS(flags, MODE_LITTLE_ENDIAN);
12382 #else /*(__BIG_ENDIAN)*/
12383 SET_FLAGS(flags, MODE_BIG_ENDIAN);
12385 INIT_MODE_FLAGS(bp) = flags;
12388 static int bnx2x_init_bp(struct bnx2x *bp)
12393 mutex_init(&bp->port.phy_mutex);
12394 mutex_init(&bp->fw_mb_mutex);
12395 mutex_init(&bp->drv_info_mutex);
12396 sema_init(&bp->stats_lock, 1);
12397 bp->drv_info_mng_owner = false;
12398 INIT_LIST_HEAD(&bp->vlan_reg);
12400 INIT_DELAYED_WORK(&bp->sp_task, bnx2x_sp_task);
12401 INIT_DELAYED_WORK(&bp->sp_rtnl_task, bnx2x_sp_rtnl_task);
12402 INIT_DELAYED_WORK(&bp->period_task, bnx2x_period_task);
12403 INIT_DELAYED_WORK(&bp->iov_task, bnx2x_iov_task);
12405 rc = bnx2x_get_hwinfo(bp);
12409 eth_zero_addr(bp->dev->dev_addr);
12412 bnx2x_set_modes_bitmap(bp);
12414 rc = bnx2x_alloc_mem_bp(bp);
12418 bnx2x_read_fwinfo(bp);
12420 func = BP_FUNC(bp);
12422 /* need to reset chip if undi was active */
12423 if (IS_PF(bp) && !BP_NOMCP(bp)) {
12426 SHMEM_RD(bp, func_mb[BP_FW_MB_IDX(bp)].drv_mb_header) &
12427 DRV_MSG_SEQ_NUMBER_MASK;
12428 BNX2X_DEV_INFO("fw_seq 0x%08x\n", bp->fw_seq);
12430 rc = bnx2x_prev_unload(bp);
12432 bnx2x_free_mem_bp(bp);
12437 if (CHIP_REV_IS_FPGA(bp))
12438 dev_err(&bp->pdev->dev, "FPGA detected\n");
12440 if (BP_NOMCP(bp) && (func == 0))
12441 dev_err(&bp->pdev->dev, "MCP disabled, must load devices in order!\n");
12443 bp->disable_tpa = disable_tpa;
12444 bp->disable_tpa |= !!IS_MF_STORAGE_ONLY(bp);
12445 /* Reduce memory usage in kdump environment by disabling TPA */
12446 bp->disable_tpa |= is_kdump_kernel();
12448 /* Set TPA flags */
12449 if (bp->disable_tpa) {
12450 bp->dev->hw_features &= ~(NETIF_F_LRO | NETIF_F_GRO_HW);
12451 bp->dev->features &= ~(NETIF_F_LRO | NETIF_F_GRO_HW);
12454 if (CHIP_IS_E1(bp))
12455 bp->dropless_fc = 0;
12457 bp->dropless_fc = dropless_fc | bnx2x_get_dropless_info(bp);
12461 bp->tx_ring_size = IS_MF_STORAGE_ONLY(bp) ? 0 : MAX_TX_AVAIL;
12463 bp->rx_ring_size = MAX_RX_AVAIL;
12465 /* make sure that the numbers are in the right granularity */
12466 bp->tx_ticks = (50 / BNX2X_BTR) * BNX2X_BTR;
12467 bp->rx_ticks = (25 / BNX2X_BTR) * BNX2X_BTR;
12469 bp->current_interval = CHIP_REV_IS_SLOW(bp) ? 5*HZ : HZ;
12471 timer_setup(&bp->timer, bnx2x_timer, 0);
12472 bp->timer.expires = jiffies + bp->current_interval;
12474 if (SHMEM2_HAS(bp, dcbx_lldp_params_offset) &&
12475 SHMEM2_HAS(bp, dcbx_lldp_dcbx_stat_offset) &&
12476 SHMEM2_HAS(bp, dcbx_en) &&
12477 SHMEM2_RD(bp, dcbx_lldp_params_offset) &&
12478 SHMEM2_RD(bp, dcbx_lldp_dcbx_stat_offset) &&
12479 SHMEM2_RD(bp, dcbx_en[BP_PORT(bp)])) {
12480 bnx2x_dcbx_set_state(bp, true, BNX2X_DCBX_ENABLED_ON_NEG_ON);
12481 bnx2x_dcbx_init_params(bp);
12483 bnx2x_dcbx_set_state(bp, false, BNX2X_DCBX_ENABLED_OFF);
12486 if (CHIP_IS_E1x(bp))
12487 bp->cnic_base_cl_id = FP_SB_MAX_E1x;
12489 bp->cnic_base_cl_id = FP_SB_MAX_E2;
12491 /* multiple tx priority */
12494 else if (CHIP_IS_E1x(bp))
12495 bp->max_cos = BNX2X_MULTI_TX_COS_E1X;
12496 else if (CHIP_IS_E2(bp) || CHIP_IS_E3A0(bp))
12497 bp->max_cos = BNX2X_MULTI_TX_COS_E2_E3A0;
12498 else if (CHIP_IS_E3B0(bp))
12499 bp->max_cos = BNX2X_MULTI_TX_COS_E3B0;
12501 BNX2X_ERR("unknown chip %x revision %x\n",
12502 CHIP_NUM(bp), CHIP_REV(bp));
12503 BNX2X_DEV_INFO("set bp->max_cos to %d\n", bp->max_cos);
12505 /* We need at least one default status block for slow-path events,
12506 * second status block for the L2 queue, and a third status block for
12507 * CNIC if supported.
12510 bp->min_msix_vec_cnt = 1;
12511 else if (CNIC_SUPPORT(bp))
12512 bp->min_msix_vec_cnt = 3;
12513 else /* PF w/o cnic */
12514 bp->min_msix_vec_cnt = 2;
12515 BNX2X_DEV_INFO("bp->min_msix_vec_cnt %d", bp->min_msix_vec_cnt);
12517 bp->dump_preset_idx = 1;
12522 /****************************************************************************
12523 * General service functions
12524 ****************************************************************************/
12527 * net_device service functions
12530 /* called with rtnl_lock */
12531 static int bnx2x_open(struct net_device *dev)
12533 struct bnx2x *bp = netdev_priv(dev);
12536 bp->stats_init = true;
12538 netif_carrier_off(dev);
12540 bnx2x_set_power_state(bp, PCI_D0);
12542 /* If parity had happen during the unload, then attentions
12543 * and/or RECOVERY_IN_PROGRES may still be set. In this case we
12544 * want the first function loaded on the current engine to
12545 * complete the recovery.
12546 * Parity recovery is only relevant for PF driver.
12549 int other_engine = BP_PATH(bp) ? 0 : 1;
12550 bool other_load_status, load_status;
12551 bool global = false;
12553 other_load_status = bnx2x_get_load_status(bp, other_engine);
12554 load_status = bnx2x_get_load_status(bp, BP_PATH(bp));
12555 if (!bnx2x_reset_is_done(bp, BP_PATH(bp)) ||
12556 bnx2x_chk_parity_attn(bp, &global, true)) {
12558 /* If there are attentions and they are in a
12559 * global blocks, set the GLOBAL_RESET bit
12560 * regardless whether it will be this function
12561 * that will complete the recovery or not.
12564 bnx2x_set_reset_global(bp);
12566 /* Only the first function on the current
12567 * engine should try to recover in open. In case
12568 * of attentions in global blocks only the first
12569 * in the chip should try to recover.
12571 if ((!load_status &&
12572 (!global || !other_load_status)) &&
12573 bnx2x_trylock_leader_lock(bp) &&
12574 !bnx2x_leader_reset(bp)) {
12575 netdev_info(bp->dev,
12576 "Recovered in open\n");
12580 /* recovery has failed... */
12581 bnx2x_set_power_state(bp, PCI_D3hot);
12582 bp->recovery_state = BNX2X_RECOVERY_FAILED;
12584 BNX2X_ERR("Recovery flow hasn't been properly completed yet. Try again later.\n"
12585 "If you still see this message after a few retries then power cycle is required.\n");
12592 bp->recovery_state = BNX2X_RECOVERY_DONE;
12593 rc = bnx2x_nic_load(bp, LOAD_OPEN);
12598 udp_tunnel_get_rx_info(dev);
12603 /* called with rtnl_lock */
12604 static int bnx2x_close(struct net_device *dev)
12606 struct bnx2x *bp = netdev_priv(dev);
12608 /* Unload the driver, release IRQs */
12609 bnx2x_nic_unload(bp, UNLOAD_CLOSE, false);
12614 struct bnx2x_mcast_list_elem_group
12616 struct list_head mcast_group_link;
12617 struct bnx2x_mcast_list_elem mcast_elems[];
12620 #define MCAST_ELEMS_PER_PG \
12621 ((PAGE_SIZE - sizeof(struct bnx2x_mcast_list_elem_group)) / \
12622 sizeof(struct bnx2x_mcast_list_elem))
12624 static void bnx2x_free_mcast_macs_list(struct list_head *mcast_group_list)
12626 struct bnx2x_mcast_list_elem_group *current_mcast_group;
12628 while (!list_empty(mcast_group_list)) {
12629 current_mcast_group = list_first_entry(mcast_group_list,
12630 struct bnx2x_mcast_list_elem_group,
12632 list_del(¤t_mcast_group->mcast_group_link);
12633 free_page((unsigned long)current_mcast_group);
12637 static int bnx2x_init_mcast_macs_list(struct bnx2x *bp,
12638 struct bnx2x_mcast_ramrod_params *p,
12639 struct list_head *mcast_group_list)
12641 struct bnx2x_mcast_list_elem *mc_mac;
12642 struct netdev_hw_addr *ha;
12643 struct bnx2x_mcast_list_elem_group *current_mcast_group = NULL;
12644 int mc_count = netdev_mc_count(bp->dev);
12647 INIT_LIST_HEAD(&p->mcast_list);
12648 netdev_for_each_mc_addr(ha, bp->dev) {
12650 current_mcast_group =
12651 (struct bnx2x_mcast_list_elem_group *)
12652 __get_free_page(GFP_ATOMIC);
12653 if (!current_mcast_group) {
12654 bnx2x_free_mcast_macs_list(mcast_group_list);
12655 BNX2X_ERR("Failed to allocate mc MAC list\n");
12658 list_add(¤t_mcast_group->mcast_group_link,
12661 mc_mac = ¤t_mcast_group->mcast_elems[offset];
12662 mc_mac->mac = bnx2x_mc_addr(ha);
12663 list_add_tail(&mc_mac->link, &p->mcast_list);
12665 if (offset == MCAST_ELEMS_PER_PG)
12668 p->mcast_list_len = mc_count;
12673 * bnx2x_set_uc_list - configure a new unicast MACs list.
12675 * @bp: driver handle
12677 * We will use zero (0) as a MAC type for these MACs.
12679 static int bnx2x_set_uc_list(struct bnx2x *bp)
12682 struct net_device *dev = bp->dev;
12683 struct netdev_hw_addr *ha;
12684 struct bnx2x_vlan_mac_obj *mac_obj = &bp->sp_objs->mac_obj;
12685 unsigned long ramrod_flags = 0;
12687 /* First schedule a cleanup up of old configuration */
12688 rc = bnx2x_del_all_macs(bp, mac_obj, BNX2X_UC_LIST_MAC, false);
12690 BNX2X_ERR("Failed to schedule DELETE operations: %d\n", rc);
12694 netdev_for_each_uc_addr(ha, dev) {
12695 rc = bnx2x_set_mac_one(bp, bnx2x_uc_addr(ha), mac_obj, true,
12696 BNX2X_UC_LIST_MAC, &ramrod_flags);
12697 if (rc == -EEXIST) {
12699 "Failed to schedule ADD operations: %d\n", rc);
12700 /* do not treat adding same MAC as error */
12703 } else if (rc < 0) {
12705 BNX2X_ERR("Failed to schedule ADD operations: %d\n",
12711 /* Execute the pending commands */
12712 __set_bit(RAMROD_CONT, &ramrod_flags);
12713 return bnx2x_set_mac_one(bp, NULL, mac_obj, false /* don't care */,
12714 BNX2X_UC_LIST_MAC, &ramrod_flags);
12717 static int bnx2x_set_mc_list_e1x(struct bnx2x *bp)
12719 LIST_HEAD(mcast_group_list);
12720 struct net_device *dev = bp->dev;
12721 struct bnx2x_mcast_ramrod_params rparam = {NULL};
12724 rparam.mcast_obj = &bp->mcast_obj;
12726 /* first, clear all configured multicast MACs */
12727 rc = bnx2x_config_mcast(bp, &rparam, BNX2X_MCAST_CMD_DEL);
12729 BNX2X_ERR("Failed to clear multicast configuration: %d\n", rc);
12733 /* then, configure a new MACs list */
12734 if (netdev_mc_count(dev)) {
12735 rc = bnx2x_init_mcast_macs_list(bp, &rparam, &mcast_group_list);
12739 /* Now add the new MACs */
12740 rc = bnx2x_config_mcast(bp, &rparam,
12741 BNX2X_MCAST_CMD_ADD);
12743 BNX2X_ERR("Failed to set a new multicast configuration: %d\n",
12746 bnx2x_free_mcast_macs_list(&mcast_group_list);
12752 static int bnx2x_set_mc_list(struct bnx2x *bp)
12754 LIST_HEAD(mcast_group_list);
12755 struct bnx2x_mcast_ramrod_params rparam = {NULL};
12756 struct net_device *dev = bp->dev;
12759 /* On older adapters, we need to flush and re-add filters */
12760 if (CHIP_IS_E1x(bp))
12761 return bnx2x_set_mc_list_e1x(bp);
12763 rparam.mcast_obj = &bp->mcast_obj;
12765 if (netdev_mc_count(dev)) {
12766 rc = bnx2x_init_mcast_macs_list(bp, &rparam, &mcast_group_list);
12770 /* Override the curently configured set of mc filters */
12771 rc = bnx2x_config_mcast(bp, &rparam,
12772 BNX2X_MCAST_CMD_SET);
12774 BNX2X_ERR("Failed to set a new multicast configuration: %d\n",
12777 bnx2x_free_mcast_macs_list(&mcast_group_list);
12779 /* If no mc addresses are required, flush the configuration */
12780 rc = bnx2x_config_mcast(bp, &rparam, BNX2X_MCAST_CMD_DEL);
12782 BNX2X_ERR("Failed to clear multicast configuration %d\n",
12789 /* If bp->state is OPEN, should be called with netif_addr_lock_bh() */
12790 static void bnx2x_set_rx_mode(struct net_device *dev)
12792 struct bnx2x *bp = netdev_priv(dev);
12794 if (bp->state != BNX2X_STATE_OPEN) {
12795 DP(NETIF_MSG_IFUP, "state is %x, returning\n", bp->state);
12798 /* Schedule an SP task to handle rest of change */
12799 bnx2x_schedule_sp_rtnl(bp, BNX2X_SP_RTNL_RX_MODE,
12804 void bnx2x_set_rx_mode_inner(struct bnx2x *bp)
12806 u32 rx_mode = BNX2X_RX_MODE_NORMAL;
12808 DP(NETIF_MSG_IFUP, "dev->flags = %x\n", bp->dev->flags);
12810 netif_addr_lock_bh(bp->dev);
12812 if (bp->dev->flags & IFF_PROMISC) {
12813 rx_mode = BNX2X_RX_MODE_PROMISC;
12814 } else if ((bp->dev->flags & IFF_ALLMULTI) ||
12815 ((netdev_mc_count(bp->dev) > BNX2X_MAX_MULTICAST) &&
12817 rx_mode = BNX2X_RX_MODE_ALLMULTI;
12820 /* some multicasts */
12821 if (bnx2x_set_mc_list(bp) < 0)
12822 rx_mode = BNX2X_RX_MODE_ALLMULTI;
12824 /* release bh lock, as bnx2x_set_uc_list might sleep */
12825 netif_addr_unlock_bh(bp->dev);
12826 if (bnx2x_set_uc_list(bp) < 0)
12827 rx_mode = BNX2X_RX_MODE_PROMISC;
12828 netif_addr_lock_bh(bp->dev);
12830 /* configuring mcast to a vf involves sleeping (when we
12831 * wait for the pf's response).
12833 bnx2x_schedule_sp_rtnl(bp,
12834 BNX2X_SP_RTNL_VFPF_MCAST, 0);
12838 bp->rx_mode = rx_mode;
12839 /* handle ISCSI SD mode */
12840 if (IS_MF_ISCSI_ONLY(bp))
12841 bp->rx_mode = BNX2X_RX_MODE_NONE;
12843 /* Schedule the rx_mode command */
12844 if (test_bit(BNX2X_FILTER_RX_MODE_PENDING, &bp->sp_state)) {
12845 set_bit(BNX2X_FILTER_RX_MODE_SCHED, &bp->sp_state);
12846 netif_addr_unlock_bh(bp->dev);
12851 bnx2x_set_storm_rx_mode(bp);
12852 netif_addr_unlock_bh(bp->dev);
12854 /* VF will need to request the PF to make this change, and so
12855 * the VF needs to release the bottom-half lock prior to the
12856 * request (as it will likely require sleep on the VF side)
12858 netif_addr_unlock_bh(bp->dev);
12859 bnx2x_vfpf_storm_rx_mode(bp);
12863 /* called with rtnl_lock */
12864 static int bnx2x_mdio_read(struct net_device *netdev, int prtad,
12865 int devad, u16 addr)
12867 struct bnx2x *bp = netdev_priv(netdev);
12871 DP(NETIF_MSG_LINK, "mdio_read: prtad 0x%x, devad 0x%x, addr 0x%x\n",
12872 prtad, devad, addr);
12874 /* The HW expects different devad if CL22 is used */
12875 devad = (devad == MDIO_DEVAD_NONE) ? DEFAULT_PHY_DEV_ADDR : devad;
12877 bnx2x_acquire_phy_lock(bp);
12878 rc = bnx2x_phy_read(&bp->link_params, prtad, devad, addr, &value);
12879 bnx2x_release_phy_lock(bp);
12880 DP(NETIF_MSG_LINK, "mdio_read_val 0x%x rc = 0x%x\n", value, rc);
12887 /* called with rtnl_lock */
12888 static int bnx2x_mdio_write(struct net_device *netdev, int prtad, int devad,
12889 u16 addr, u16 value)
12891 struct bnx2x *bp = netdev_priv(netdev);
12895 "mdio_write: prtad 0x%x, devad 0x%x, addr 0x%x, value 0x%x\n",
12896 prtad, devad, addr, value);
12898 /* The HW expects different devad if CL22 is used */
12899 devad = (devad == MDIO_DEVAD_NONE) ? DEFAULT_PHY_DEV_ADDR : devad;
12901 bnx2x_acquire_phy_lock(bp);
12902 rc = bnx2x_phy_write(&bp->link_params, prtad, devad, addr, value);
12903 bnx2x_release_phy_lock(bp);
12907 /* called with rtnl_lock */
12908 static int bnx2x_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd)
12910 struct bnx2x *bp = netdev_priv(dev);
12911 struct mii_ioctl_data *mdio = if_mii(ifr);
12913 if (!netif_running(dev))
12917 case SIOCSHWTSTAMP:
12918 return bnx2x_hwtstamp_ioctl(bp, ifr);
12920 DP(NETIF_MSG_LINK, "ioctl: phy id 0x%x, reg 0x%x, val_in 0x%x\n",
12921 mdio->phy_id, mdio->reg_num, mdio->val_in);
12922 return mdio_mii_ioctl(&bp->mdio, mdio, cmd);
12926 static int bnx2x_validate_addr(struct net_device *dev)
12928 struct bnx2x *bp = netdev_priv(dev);
12930 /* query the bulletin board for mac address configured by the PF */
12932 bnx2x_sample_bulletin(bp);
12934 if (!is_valid_ether_addr(dev->dev_addr)) {
12935 BNX2X_ERR("Non-valid Ethernet address\n");
12936 return -EADDRNOTAVAIL;
12941 static int bnx2x_get_phys_port_id(struct net_device *netdev,
12942 struct netdev_phys_item_id *ppid)
12944 struct bnx2x *bp = netdev_priv(netdev);
12946 if (!(bp->flags & HAS_PHYS_PORT_ID))
12947 return -EOPNOTSUPP;
12949 ppid->id_len = sizeof(bp->phys_port_id);
12950 memcpy(ppid->id, bp->phys_port_id, ppid->id_len);
12955 static netdev_features_t bnx2x_features_check(struct sk_buff *skb,
12956 struct net_device *dev,
12957 netdev_features_t features)
12960 * A skb with gso_size + header length > 9700 will cause a
12961 * firmware panic. Drop GSO support.
12963 * Eventually the upper layer should not pass these packets down.
12965 * For speed, if the gso_size is <= 9000, assume there will
12966 * not be 700 bytes of headers and pass it through. Only do a
12967 * full (slow) validation if the gso_size is > 9000.
12969 * (Due to the way SKB_BY_FRAGS works this will also do a full
12970 * validation in that case.)
12972 if (unlikely(skb_is_gso(skb) &&
12973 (skb_shinfo(skb)->gso_size > 9000) &&
12974 !skb_gso_validate_mac_len(skb, 9700)))
12975 features &= ~NETIF_F_GSO_MASK;
12977 features = vlan_features_check(skb, features);
12978 return vxlan_features_check(skb, features);
12981 static int __bnx2x_vlan_configure_vid(struct bnx2x *bp, u16 vid, bool add)
12986 unsigned long ramrod_flags = 0;
12988 __set_bit(RAMROD_COMP_WAIT, &ramrod_flags);
12989 rc = bnx2x_set_vlan_one(bp, vid, &bp->sp_objs->vlan_obj,
12990 add, &ramrod_flags);
12992 rc = bnx2x_vfpf_update_vlan(bp, vid, bp->fp->index, add);
12998 static int bnx2x_vlan_configure_vid_list(struct bnx2x *bp)
13000 struct bnx2x_vlan_entry *vlan;
13003 /* Configure all non-configured entries */
13004 list_for_each_entry(vlan, &bp->vlan_reg, link) {
13008 if (bp->vlan_cnt >= bp->vlan_credit)
13011 rc = __bnx2x_vlan_configure_vid(bp, vlan->vid, true);
13013 BNX2X_ERR("Unable to config VLAN %d\n", vlan->vid);
13017 DP(NETIF_MSG_IFUP, "HW configured for VLAN %d\n", vlan->vid);
13025 static void bnx2x_vlan_configure(struct bnx2x *bp, bool set_rx_mode)
13027 bool need_accept_any_vlan;
13029 need_accept_any_vlan = !!bnx2x_vlan_configure_vid_list(bp);
13031 if (bp->accept_any_vlan != need_accept_any_vlan) {
13032 bp->accept_any_vlan = need_accept_any_vlan;
13033 DP(NETIF_MSG_IFUP, "Accept all VLAN %s\n",
13034 bp->accept_any_vlan ? "raised" : "cleared");
13037 bnx2x_set_rx_mode_inner(bp);
13039 bnx2x_vfpf_storm_rx_mode(bp);
13044 int bnx2x_vlan_reconfigure_vid(struct bnx2x *bp)
13046 /* Don't set rx mode here. Our caller will do it. */
13047 bnx2x_vlan_configure(bp, false);
13052 static int bnx2x_vlan_rx_add_vid(struct net_device *dev, __be16 proto, u16 vid)
13054 struct bnx2x *bp = netdev_priv(dev);
13055 struct bnx2x_vlan_entry *vlan;
13057 DP(NETIF_MSG_IFUP, "Adding VLAN %d\n", vid);
13059 vlan = kmalloc(sizeof(*vlan), GFP_KERNEL);
13065 list_add_tail(&vlan->link, &bp->vlan_reg);
13067 if (netif_running(dev))
13068 bnx2x_vlan_configure(bp, true);
13073 static int bnx2x_vlan_rx_kill_vid(struct net_device *dev, __be16 proto, u16 vid)
13075 struct bnx2x *bp = netdev_priv(dev);
13076 struct bnx2x_vlan_entry *vlan;
13077 bool found = false;
13080 DP(NETIF_MSG_IFUP, "Removing VLAN %d\n", vid);
13082 list_for_each_entry(vlan, &bp->vlan_reg, link)
13083 if (vlan->vid == vid) {
13089 BNX2X_ERR("Unable to kill VLAN %d - not found\n", vid);
13093 if (netif_running(dev) && vlan->hw) {
13094 rc = __bnx2x_vlan_configure_vid(bp, vid, false);
13095 DP(NETIF_MSG_IFUP, "HW deconfigured for VLAN %d\n", vid);
13099 list_del(&vlan->link);
13102 if (netif_running(dev))
13103 bnx2x_vlan_configure(bp, true);
13105 DP(NETIF_MSG_IFUP, "Removing VLAN result %d\n", rc);
13110 static const struct net_device_ops bnx2x_netdev_ops = {
13111 .ndo_open = bnx2x_open,
13112 .ndo_stop = bnx2x_close,
13113 .ndo_start_xmit = bnx2x_start_xmit,
13114 .ndo_select_queue = bnx2x_select_queue,
13115 .ndo_set_rx_mode = bnx2x_set_rx_mode,
13116 .ndo_set_mac_address = bnx2x_change_mac_addr,
13117 .ndo_validate_addr = bnx2x_validate_addr,
13118 .ndo_do_ioctl = bnx2x_ioctl,
13119 .ndo_change_mtu = bnx2x_change_mtu,
13120 .ndo_fix_features = bnx2x_fix_features,
13121 .ndo_set_features = bnx2x_set_features,
13122 .ndo_tx_timeout = bnx2x_tx_timeout,
13123 .ndo_vlan_rx_add_vid = bnx2x_vlan_rx_add_vid,
13124 .ndo_vlan_rx_kill_vid = bnx2x_vlan_rx_kill_vid,
13125 .ndo_setup_tc = __bnx2x_setup_tc,
13126 #ifdef CONFIG_BNX2X_SRIOV
13127 .ndo_set_vf_mac = bnx2x_set_vf_mac,
13128 .ndo_set_vf_vlan = bnx2x_set_vf_vlan,
13129 .ndo_get_vf_config = bnx2x_get_vf_config,
13130 .ndo_set_vf_spoofchk = bnx2x_set_vf_spoofchk,
13132 #ifdef NETDEV_FCOE_WWNN
13133 .ndo_fcoe_get_wwn = bnx2x_fcoe_get_wwn,
13136 .ndo_get_phys_port_id = bnx2x_get_phys_port_id,
13137 .ndo_set_vf_link_state = bnx2x_set_vf_link_state,
13138 .ndo_features_check = bnx2x_features_check,
13139 .ndo_udp_tunnel_add = bnx2x_udp_tunnel_add,
13140 .ndo_udp_tunnel_del = bnx2x_udp_tunnel_del,
13143 static int bnx2x_set_coherency_mask(struct bnx2x *bp)
13145 struct device *dev = &bp->pdev->dev;
13147 if (dma_set_mask_and_coherent(dev, DMA_BIT_MASK(64)) != 0 &&
13148 dma_set_mask_and_coherent(dev, DMA_BIT_MASK(32)) != 0) {
13149 dev_err(dev, "System does not support DMA, aborting\n");
13156 static void bnx2x_disable_pcie_error_reporting(struct bnx2x *bp)
13158 if (bp->flags & AER_ENABLED) {
13159 pci_disable_pcie_error_reporting(bp->pdev);
13160 bp->flags &= ~AER_ENABLED;
13164 static int bnx2x_init_dev(struct bnx2x *bp, struct pci_dev *pdev,
13165 struct net_device *dev, unsigned long board_type)
13169 bool chip_is_e1x = (board_type == BCM57710 ||
13170 board_type == BCM57711 ||
13171 board_type == BCM57711E);
13173 SET_NETDEV_DEV(dev, &pdev->dev);
13178 rc = pci_enable_device(pdev);
13180 dev_err(&bp->pdev->dev,
13181 "Cannot enable PCI device, aborting\n");
13185 if (!(pci_resource_flags(pdev, 0) & IORESOURCE_MEM)) {
13186 dev_err(&bp->pdev->dev,
13187 "Cannot find PCI device base address, aborting\n");
13189 goto err_out_disable;
13192 if (IS_PF(bp) && !(pci_resource_flags(pdev, 2) & IORESOURCE_MEM)) {
13193 dev_err(&bp->pdev->dev, "Cannot find second PCI device base address, aborting\n");
13195 goto err_out_disable;
13198 pci_read_config_dword(pdev, PCICFG_REVISION_ID_OFFSET, &pci_cfg_dword);
13199 if ((pci_cfg_dword & PCICFG_REVESION_ID_MASK) ==
13200 PCICFG_REVESION_ID_ERROR_VAL) {
13201 pr_err("PCI device error, probably due to fan failure, aborting\n");
13203 goto err_out_disable;
13206 if (atomic_read(&pdev->enable_cnt) == 1) {
13207 rc = pci_request_regions(pdev, DRV_MODULE_NAME);
13209 dev_err(&bp->pdev->dev,
13210 "Cannot obtain PCI resources, aborting\n");
13211 goto err_out_disable;
13214 pci_set_master(pdev);
13215 pci_save_state(pdev);
13219 if (!pdev->pm_cap) {
13220 dev_err(&bp->pdev->dev,
13221 "Cannot find power management capability, aborting\n");
13223 goto err_out_release;
13227 if (!pci_is_pcie(pdev)) {
13228 dev_err(&bp->pdev->dev, "Not PCI Express, aborting\n");
13230 goto err_out_release;
13233 rc = bnx2x_set_coherency_mask(bp);
13235 goto err_out_release;
13237 dev->mem_start = pci_resource_start(pdev, 0);
13238 dev->base_addr = dev->mem_start;
13239 dev->mem_end = pci_resource_end(pdev, 0);
13241 dev->irq = pdev->irq;
13243 bp->regview = pci_ioremap_bar(pdev, 0);
13244 if (!bp->regview) {
13245 dev_err(&bp->pdev->dev,
13246 "Cannot map register space, aborting\n");
13248 goto err_out_release;
13251 /* In E1/E1H use pci device function given by kernel.
13252 * In E2/E3 read physical function from ME register since these chips
13253 * support Physical Device Assignment where kernel BDF maybe arbitrary
13254 * (depending on hypervisor).
13257 bp->pf_num = PCI_FUNC(pdev->devfn);
13260 pci_read_config_dword(bp->pdev,
13261 PCICFG_ME_REGISTER, &pci_cfg_dword);
13262 bp->pf_num = (u8)((pci_cfg_dword & ME_REG_ABS_PF_NUM) >>
13263 ME_REG_ABS_PF_NUM_SHIFT);
13265 BNX2X_DEV_INFO("me reg PF num: %d\n", bp->pf_num);
13267 /* clean indirect addresses */
13268 pci_write_config_dword(bp->pdev, PCICFG_GRC_ADDRESS,
13269 PCICFG_VENDOR_ID_OFFSET);
13271 /* Set PCIe reset type to fundamental for EEH recovery */
13272 pdev->needs_freset = 1;
13274 /* AER (Advanced Error reporting) configuration */
13275 rc = pci_enable_pcie_error_reporting(pdev);
13277 bp->flags |= AER_ENABLED;
13279 BNX2X_DEV_INFO("Failed To configure PCIe AER [%d]\n", rc);
13282 * Clean the following indirect addresses for all functions since it
13283 * is not used by the driver.
13286 REG_WR(bp, PXP2_REG_PGL_ADDR_88_F0, 0);
13287 REG_WR(bp, PXP2_REG_PGL_ADDR_8C_F0, 0);
13288 REG_WR(bp, PXP2_REG_PGL_ADDR_90_F0, 0);
13289 REG_WR(bp, PXP2_REG_PGL_ADDR_94_F0, 0);
13292 REG_WR(bp, PXP2_REG_PGL_ADDR_88_F1, 0);
13293 REG_WR(bp, PXP2_REG_PGL_ADDR_8C_F1, 0);
13294 REG_WR(bp, PXP2_REG_PGL_ADDR_90_F1, 0);
13295 REG_WR(bp, PXP2_REG_PGL_ADDR_94_F1, 0);
13298 /* Enable internal target-read (in case we are probed after PF
13299 * FLR). Must be done prior to any BAR read access. Only for
13304 PGLUE_B_REG_INTERNAL_PFID_ENABLE_TARGET_READ, 1);
13307 dev->watchdog_timeo = TX_TIMEOUT;
13309 dev->netdev_ops = &bnx2x_netdev_ops;
13310 bnx2x_set_ethtool_ops(bp, dev);
13312 dev->priv_flags |= IFF_UNICAST_FLT;
13314 dev->hw_features = NETIF_F_SG | NETIF_F_IP_CSUM | NETIF_F_IPV6_CSUM |
13315 NETIF_F_TSO | NETIF_F_TSO_ECN | NETIF_F_TSO6 |
13316 NETIF_F_RXCSUM | NETIF_F_LRO | NETIF_F_GRO | NETIF_F_GRO_HW |
13317 NETIF_F_RXHASH | NETIF_F_HW_VLAN_CTAG_TX;
13318 if (!chip_is_e1x) {
13319 dev->hw_features |= NETIF_F_GSO_GRE | NETIF_F_GSO_GRE_CSUM |
13320 NETIF_F_GSO_IPXIP4 |
13321 NETIF_F_GSO_UDP_TUNNEL |
13322 NETIF_F_GSO_UDP_TUNNEL_CSUM |
13323 NETIF_F_GSO_PARTIAL;
13325 dev->hw_enc_features =
13326 NETIF_F_IP_CSUM | NETIF_F_IPV6_CSUM | NETIF_F_SG |
13327 NETIF_F_TSO | NETIF_F_TSO_ECN | NETIF_F_TSO6 |
13328 NETIF_F_GSO_IPXIP4 |
13329 NETIF_F_GSO_GRE | NETIF_F_GSO_GRE_CSUM |
13330 NETIF_F_GSO_UDP_TUNNEL | NETIF_F_GSO_UDP_TUNNEL_CSUM |
13331 NETIF_F_GSO_PARTIAL;
13333 dev->gso_partial_features = NETIF_F_GSO_GRE_CSUM |
13334 NETIF_F_GSO_UDP_TUNNEL_CSUM;
13337 dev->vlan_features = NETIF_F_SG | NETIF_F_IP_CSUM | NETIF_F_IPV6_CSUM |
13338 NETIF_F_TSO | NETIF_F_TSO_ECN | NETIF_F_TSO6 | NETIF_F_HIGHDMA;
13342 bp->accept_any_vlan = true;
13344 dev->hw_features |= NETIF_F_HW_VLAN_CTAG_FILTER;
13346 /* For VF we'll know whether to enable VLAN filtering after
13347 * getting a response to CHANNEL_TLV_ACQUIRE from PF.
13350 dev->features |= dev->hw_features | NETIF_F_HW_VLAN_CTAG_RX;
13351 dev->features |= NETIF_F_HIGHDMA;
13352 if (dev->features & NETIF_F_LRO)
13353 dev->features &= ~NETIF_F_GRO_HW;
13355 /* Add Loopback capability to the device */
13356 dev->hw_features |= NETIF_F_LOOPBACK;
13359 dev->dcbnl_ops = &bnx2x_dcbnl_ops;
13362 /* MTU range, 46 - 9600 */
13363 dev->min_mtu = ETH_MIN_PACKET_SIZE;
13364 dev->max_mtu = ETH_MAX_JUMBO_PACKET_SIZE;
13366 /* get_port_hwinfo() will set prtad and mmds properly */
13367 bp->mdio.prtad = MDIO_PRTAD_NONE;
13369 bp->mdio.mode_support = MDIO_SUPPORTS_C45 | MDIO_EMULATE_C22;
13370 bp->mdio.dev = dev;
13371 bp->mdio.mdio_read = bnx2x_mdio_read;
13372 bp->mdio.mdio_write = bnx2x_mdio_write;
13377 if (atomic_read(&pdev->enable_cnt) == 1)
13378 pci_release_regions(pdev);
13381 pci_disable_device(pdev);
13387 static int bnx2x_check_firmware(struct bnx2x *bp)
13389 const struct firmware *firmware = bp->firmware;
13390 struct bnx2x_fw_file_hdr *fw_hdr;
13391 struct bnx2x_fw_file_section *sections;
13392 u32 offset, len, num_ops;
13393 __be16 *ops_offsets;
13397 if (firmware->size < sizeof(struct bnx2x_fw_file_hdr)) {
13398 BNX2X_ERR("Wrong FW size\n");
13402 fw_hdr = (struct bnx2x_fw_file_hdr *)firmware->data;
13403 sections = (struct bnx2x_fw_file_section *)fw_hdr;
13405 /* Make sure none of the offsets and sizes make us read beyond
13406 * the end of the firmware data */
13407 for (i = 0; i < sizeof(*fw_hdr) / sizeof(*sections); i++) {
13408 offset = be32_to_cpu(sections[i].offset);
13409 len = be32_to_cpu(sections[i].len);
13410 if (offset + len > firmware->size) {
13411 BNX2X_ERR("Section %d length is out of bounds\n", i);
13416 /* Likewise for the init_ops offsets */
13417 offset = be32_to_cpu(fw_hdr->init_ops_offsets.offset);
13418 ops_offsets = (__force __be16 *)(firmware->data + offset);
13419 num_ops = be32_to_cpu(fw_hdr->init_ops.len) / sizeof(struct raw_op);
13421 for (i = 0; i < be32_to_cpu(fw_hdr->init_ops_offsets.len) / 2; i++) {
13422 if (be16_to_cpu(ops_offsets[i]) > num_ops) {
13423 BNX2X_ERR("Section offset %d is out of bounds\n", i);
13428 /* Check FW version */
13429 offset = be32_to_cpu(fw_hdr->fw_version.offset);
13430 fw_ver = firmware->data + offset;
13431 if ((fw_ver[0] != BCM_5710_FW_MAJOR_VERSION) ||
13432 (fw_ver[1] != BCM_5710_FW_MINOR_VERSION) ||
13433 (fw_ver[2] != BCM_5710_FW_REVISION_VERSION) ||
13434 (fw_ver[3] != BCM_5710_FW_ENGINEERING_VERSION)) {
13435 BNX2X_ERR("Bad FW version:%d.%d.%d.%d. Should be %d.%d.%d.%d\n",
13436 fw_ver[0], fw_ver[1], fw_ver[2], fw_ver[3],
13437 BCM_5710_FW_MAJOR_VERSION,
13438 BCM_5710_FW_MINOR_VERSION,
13439 BCM_5710_FW_REVISION_VERSION,
13440 BCM_5710_FW_ENGINEERING_VERSION);
13447 static void be32_to_cpu_n(const u8 *_source, u8 *_target, u32 n)
13449 const __be32 *source = (const __be32 *)_source;
13450 u32 *target = (u32 *)_target;
13453 for (i = 0; i < n/4; i++)
13454 target[i] = be32_to_cpu(source[i]);
13458 Ops array is stored in the following format:
13459 {op(8bit), offset(24bit, big endian), data(32bit, big endian)}
13461 static void bnx2x_prep_ops(const u8 *_source, u8 *_target, u32 n)
13463 const __be32 *source = (const __be32 *)_source;
13464 struct raw_op *target = (struct raw_op *)_target;
13467 for (i = 0, j = 0; i < n/8; i++, j += 2) {
13468 tmp = be32_to_cpu(source[j]);
13469 target[i].op = (tmp >> 24) & 0xff;
13470 target[i].offset = tmp & 0xffffff;
13471 target[i].raw_data = be32_to_cpu(source[j + 1]);
13475 /* IRO array is stored in the following format:
13476 * {base(24bit), m1(16bit), m2(16bit), m3(16bit), size(16bit) }
13478 static void bnx2x_prep_iro(const u8 *_source, u8 *_target, u32 n)
13480 const __be32 *source = (const __be32 *)_source;
13481 struct iro *target = (struct iro *)_target;
13484 for (i = 0, j = 0; i < n/sizeof(struct iro); i++) {
13485 target[i].base = be32_to_cpu(source[j]);
13487 tmp = be32_to_cpu(source[j]);
13488 target[i].m1 = (tmp >> 16) & 0xffff;
13489 target[i].m2 = tmp & 0xffff;
13491 tmp = be32_to_cpu(source[j]);
13492 target[i].m3 = (tmp >> 16) & 0xffff;
13493 target[i].size = tmp & 0xffff;
13498 static void be16_to_cpu_n(const u8 *_source, u8 *_target, u32 n)
13500 const __be16 *source = (const __be16 *)_source;
13501 u16 *target = (u16 *)_target;
13504 for (i = 0; i < n/2; i++)
13505 target[i] = be16_to_cpu(source[i]);
13508 #define BNX2X_ALLOC_AND_SET(arr, lbl, func) \
13510 u32 len = be32_to_cpu(fw_hdr->arr.len); \
13511 bp->arr = kmalloc(len, GFP_KERNEL); \
13514 func(bp->firmware->data + be32_to_cpu(fw_hdr->arr.offset), \
13515 (u8 *)bp->arr, len); \
13518 static int bnx2x_init_firmware(struct bnx2x *bp)
13520 const char *fw_file_name;
13521 struct bnx2x_fw_file_hdr *fw_hdr;
13527 if (CHIP_IS_E1(bp))
13528 fw_file_name = FW_FILE_NAME_E1;
13529 else if (CHIP_IS_E1H(bp))
13530 fw_file_name = FW_FILE_NAME_E1H;
13531 else if (!CHIP_IS_E1x(bp))
13532 fw_file_name = FW_FILE_NAME_E2;
13534 BNX2X_ERR("Unsupported chip revision\n");
13537 BNX2X_DEV_INFO("Loading %s\n", fw_file_name);
13539 rc = request_firmware(&bp->firmware, fw_file_name, &bp->pdev->dev);
13541 BNX2X_ERR("Can't load firmware file %s\n",
13543 goto request_firmware_exit;
13546 rc = bnx2x_check_firmware(bp);
13548 BNX2X_ERR("Corrupt firmware file %s\n", fw_file_name);
13549 goto request_firmware_exit;
13552 fw_hdr = (struct bnx2x_fw_file_hdr *)bp->firmware->data;
13554 /* Initialize the pointers to the init arrays */
13557 BNX2X_ALLOC_AND_SET(init_data, request_firmware_exit, be32_to_cpu_n);
13560 BNX2X_ALLOC_AND_SET(init_ops, init_ops_alloc_err, bnx2x_prep_ops);
13563 BNX2X_ALLOC_AND_SET(init_ops_offsets, init_offsets_alloc_err,
13566 /* STORMs firmware */
13567 INIT_TSEM_INT_TABLE_DATA(bp) = bp->firmware->data +
13568 be32_to_cpu(fw_hdr->tsem_int_table_data.offset);
13569 INIT_TSEM_PRAM_DATA(bp) = bp->firmware->data +
13570 be32_to_cpu(fw_hdr->tsem_pram_data.offset);
13571 INIT_USEM_INT_TABLE_DATA(bp) = bp->firmware->data +
13572 be32_to_cpu(fw_hdr->usem_int_table_data.offset);
13573 INIT_USEM_PRAM_DATA(bp) = bp->firmware->data +
13574 be32_to_cpu(fw_hdr->usem_pram_data.offset);
13575 INIT_XSEM_INT_TABLE_DATA(bp) = bp->firmware->data +
13576 be32_to_cpu(fw_hdr->xsem_int_table_data.offset);
13577 INIT_XSEM_PRAM_DATA(bp) = bp->firmware->data +
13578 be32_to_cpu(fw_hdr->xsem_pram_data.offset);
13579 INIT_CSEM_INT_TABLE_DATA(bp) = bp->firmware->data +
13580 be32_to_cpu(fw_hdr->csem_int_table_data.offset);
13581 INIT_CSEM_PRAM_DATA(bp) = bp->firmware->data +
13582 be32_to_cpu(fw_hdr->csem_pram_data.offset);
13584 BNX2X_ALLOC_AND_SET(iro_arr, iro_alloc_err, bnx2x_prep_iro);
13589 kfree(bp->init_ops_offsets);
13590 init_offsets_alloc_err:
13591 kfree(bp->init_ops);
13592 init_ops_alloc_err:
13593 kfree(bp->init_data);
13594 request_firmware_exit:
13595 release_firmware(bp->firmware);
13596 bp->firmware = NULL;
13601 static void bnx2x_release_firmware(struct bnx2x *bp)
13603 kfree(bp->init_ops_offsets);
13604 kfree(bp->init_ops);
13605 kfree(bp->init_data);
13606 release_firmware(bp->firmware);
13607 bp->firmware = NULL;
13610 static struct bnx2x_func_sp_drv_ops bnx2x_func_sp_drv = {
13611 .init_hw_cmn_chip = bnx2x_init_hw_common_chip,
13612 .init_hw_cmn = bnx2x_init_hw_common,
13613 .init_hw_port = bnx2x_init_hw_port,
13614 .init_hw_func = bnx2x_init_hw_func,
13616 .reset_hw_cmn = bnx2x_reset_common,
13617 .reset_hw_port = bnx2x_reset_port,
13618 .reset_hw_func = bnx2x_reset_func,
13620 .gunzip_init = bnx2x_gunzip_init,
13621 .gunzip_end = bnx2x_gunzip_end,
13623 .init_fw = bnx2x_init_firmware,
13624 .release_fw = bnx2x_release_firmware,
13627 void bnx2x__init_func_obj(struct bnx2x *bp)
13629 /* Prepare DMAE related driver resources */
13630 bnx2x_setup_dmae(bp);
13632 bnx2x_init_func_obj(bp, &bp->func_obj,
13633 bnx2x_sp(bp, func_rdata),
13634 bnx2x_sp_mapping(bp, func_rdata),
13635 bnx2x_sp(bp, func_afex_rdata),
13636 bnx2x_sp_mapping(bp, func_afex_rdata),
13637 &bnx2x_func_sp_drv);
13640 /* must be called after sriov-enable */
13641 static int bnx2x_set_qm_cid_count(struct bnx2x *bp)
13643 int cid_count = BNX2X_L2_MAX_CID(bp);
13646 cid_count += BNX2X_VF_CIDS;
13648 if (CNIC_SUPPORT(bp))
13649 cid_count += CNIC_CID_MAX;
13651 return roundup(cid_count, QM_CID_ROUND);
13655 * bnx2x_get_num_none_def_sbs - return the number of none default SBs
13660 static int bnx2x_get_num_non_def_sbs(struct pci_dev *pdev, int cnic_cnt)
13666 * If MSI-X is not supported - return number of SBs needed to support
13667 * one fast path queue: one FP queue + SB for CNIC
13669 if (!pdev->msix_cap) {
13670 dev_info(&pdev->dev, "no msix capability found\n");
13671 return 1 + cnic_cnt;
13673 dev_info(&pdev->dev, "msix capability found\n");
13676 * The value in the PCI configuration space is the index of the last
13677 * entry, namely one less than the actual size of the table, which is
13678 * exactly what we want to return from this function: number of all SBs
13679 * without the default SB.
13680 * For VFs there is no default SB, then we return (index+1).
13682 pci_read_config_word(pdev, pdev->msix_cap + PCI_MSIX_FLAGS, &control);
13684 index = control & PCI_MSIX_FLAGS_QSIZE;
13689 static int set_max_cos_est(int chip_id)
13695 return BNX2X_MULTI_TX_COS_E1X;
13698 return BNX2X_MULTI_TX_COS_E2_E3A0;
13703 case BCM57840_4_10:
13704 case BCM57840_2_20:
13710 return BNX2X_MULTI_TX_COS_E3B0;
13718 pr_err("Unknown board_type (%d), aborting\n", chip_id);
13723 static int set_is_vf(int chip_id)
13737 /* nig_tsgen registers relative address */
13738 #define tsgen_ctrl 0x0
13739 #define tsgen_freecount 0x10
13740 #define tsgen_synctime_t0 0x20
13741 #define tsgen_offset_t0 0x28
13742 #define tsgen_drift_t0 0x30
13743 #define tsgen_synctime_t1 0x58
13744 #define tsgen_offset_t1 0x60
13745 #define tsgen_drift_t1 0x68
13747 /* FW workaround for setting drift */
13748 static int bnx2x_send_update_drift_ramrod(struct bnx2x *bp, int drift_dir,
13749 int best_val, int best_period)
13751 struct bnx2x_func_state_params func_params = {NULL};
13752 struct bnx2x_func_set_timesync_params *set_timesync_params =
13753 &func_params.params.set_timesync;
13755 /* Prepare parameters for function state transitions */
13756 __set_bit(RAMROD_COMP_WAIT, &func_params.ramrod_flags);
13757 __set_bit(RAMROD_RETRY, &func_params.ramrod_flags);
13759 func_params.f_obj = &bp->func_obj;
13760 func_params.cmd = BNX2X_F_CMD_SET_TIMESYNC;
13762 /* Function parameters */
13763 set_timesync_params->drift_adjust_cmd = TS_DRIFT_ADJUST_SET;
13764 set_timesync_params->offset_cmd = TS_OFFSET_KEEP;
13765 set_timesync_params->add_sub_drift_adjust_value =
13766 drift_dir ? TS_ADD_VALUE : TS_SUB_VALUE;
13767 set_timesync_params->drift_adjust_value = best_val;
13768 set_timesync_params->drift_adjust_period = best_period;
13770 return bnx2x_func_state_change(bp, &func_params);
13773 static int bnx2x_ptp_adjfreq(struct ptp_clock_info *ptp, s32 ppb)
13775 struct bnx2x *bp = container_of(ptp, struct bnx2x, ptp_clock_info);
13778 int val, period, period1, period2, dif, dif1, dif2;
13779 int best_dif = BNX2X_MAX_PHC_DRIFT, best_period = 0, best_val = 0;
13781 DP(BNX2X_MSG_PTP, "PTP adjfreq called, ppb = %d\n", ppb);
13783 if (!netif_running(bp->dev)) {
13785 "PTP adjfreq called while the interface is down\n");
13796 best_period = 0x1FFFFFF;
13797 } else if (ppb >= BNX2X_MAX_PHC_DRIFT) {
13801 /* Changed not to allow val = 8, 16, 24 as these values
13802 * are not supported in workaround.
13804 for (val = 0; val <= 31; val++) {
13805 if ((val & 0x7) == 0)
13807 period1 = val * 1000000 / ppb;
13808 period2 = period1 + 1;
13810 dif1 = ppb - (val * 1000000 / period1);
13812 dif1 = BNX2X_MAX_PHC_DRIFT;
13815 dif2 = ppb - (val * 1000000 / period2);
13818 dif = (dif1 < dif2) ? dif1 : dif2;
13819 period = (dif1 < dif2) ? period1 : period2;
13820 if (dif < best_dif) {
13823 best_period = period;
13828 rc = bnx2x_send_update_drift_ramrod(bp, drift_dir, best_val,
13831 BNX2X_ERR("Failed to set drift\n");
13835 DP(BNX2X_MSG_PTP, "Configured val = %d, period = %d\n", best_val,
13841 static int bnx2x_ptp_adjtime(struct ptp_clock_info *ptp, s64 delta)
13843 struct bnx2x *bp = container_of(ptp, struct bnx2x, ptp_clock_info);
13845 if (!netif_running(bp->dev)) {
13847 "PTP adjtime called while the interface is down\n");
13851 DP(BNX2X_MSG_PTP, "PTP adjtime called, delta = %llx\n", delta);
13853 timecounter_adjtime(&bp->timecounter, delta);
13858 static int bnx2x_ptp_gettime(struct ptp_clock_info *ptp, struct timespec64 *ts)
13860 struct bnx2x *bp = container_of(ptp, struct bnx2x, ptp_clock_info);
13863 if (!netif_running(bp->dev)) {
13865 "PTP gettime called while the interface is down\n");
13869 ns = timecounter_read(&bp->timecounter);
13871 DP(BNX2X_MSG_PTP, "PTP gettime called, ns = %llu\n", ns);
13873 *ts = ns_to_timespec64(ns);
13878 static int bnx2x_ptp_settime(struct ptp_clock_info *ptp,
13879 const struct timespec64 *ts)
13881 struct bnx2x *bp = container_of(ptp, struct bnx2x, ptp_clock_info);
13884 if (!netif_running(bp->dev)) {
13886 "PTP settime called while the interface is down\n");
13890 ns = timespec64_to_ns(ts);
13892 DP(BNX2X_MSG_PTP, "PTP settime called, ns = %llu\n", ns);
13894 /* Re-init the timecounter */
13895 timecounter_init(&bp->timecounter, &bp->cyclecounter, ns);
13900 /* Enable (or disable) ancillary features of the phc subsystem */
13901 static int bnx2x_ptp_enable(struct ptp_clock_info *ptp,
13902 struct ptp_clock_request *rq, int on)
13904 struct bnx2x *bp = container_of(ptp, struct bnx2x, ptp_clock_info);
13906 BNX2X_ERR("PHC ancillary features are not supported\n");
13910 void bnx2x_register_phc(struct bnx2x *bp)
13912 /* Fill the ptp_clock_info struct and register PTP clock*/
13913 bp->ptp_clock_info.owner = THIS_MODULE;
13914 snprintf(bp->ptp_clock_info.name, 16, "%s", bp->dev->name);
13915 bp->ptp_clock_info.max_adj = BNX2X_MAX_PHC_DRIFT; /* In PPB */
13916 bp->ptp_clock_info.n_alarm = 0;
13917 bp->ptp_clock_info.n_ext_ts = 0;
13918 bp->ptp_clock_info.n_per_out = 0;
13919 bp->ptp_clock_info.pps = 0;
13920 bp->ptp_clock_info.adjfreq = bnx2x_ptp_adjfreq;
13921 bp->ptp_clock_info.adjtime = bnx2x_ptp_adjtime;
13922 bp->ptp_clock_info.gettime64 = bnx2x_ptp_gettime;
13923 bp->ptp_clock_info.settime64 = bnx2x_ptp_settime;
13924 bp->ptp_clock_info.enable = bnx2x_ptp_enable;
13926 bp->ptp_clock = ptp_clock_register(&bp->ptp_clock_info, &bp->pdev->dev);
13927 if (IS_ERR(bp->ptp_clock)) {
13928 bp->ptp_clock = NULL;
13929 BNX2X_ERR("PTP clock registration failed\n");
13933 static int bnx2x_init_one(struct pci_dev *pdev,
13934 const struct pci_device_id *ent)
13936 struct net_device *dev = NULL;
13938 int rc, max_non_def_sbs;
13939 int rx_count, tx_count, rss_count, doorbell_size;
13944 /* Management FW 'remembers' living interfaces. Allow it some time
13945 * to forget previously living interfaces, allowing a proper re-load.
13947 if (is_kdump_kernel()) {
13948 ktime_t now = ktime_get_boottime();
13949 ktime_t fw_ready_time = ktime_set(5, 0);
13951 if (ktime_before(now, fw_ready_time))
13952 msleep(ktime_ms_delta(fw_ready_time, now));
13955 /* An estimated maximum supported CoS number according to the chip
13957 * We will try to roughly estimate the maximum number of CoSes this chip
13958 * may support in order to minimize the memory allocated for Tx
13959 * netdev_queue's. This number will be accurately calculated during the
13960 * initialization of bp->max_cos based on the chip versions AND chip
13961 * revision in the bnx2x_init_bp().
13963 max_cos_est = set_max_cos_est(ent->driver_data);
13964 if (max_cos_est < 0)
13965 return max_cos_est;
13966 is_vf = set_is_vf(ent->driver_data);
13967 cnic_cnt = is_vf ? 0 : 1;
13969 max_non_def_sbs = bnx2x_get_num_non_def_sbs(pdev, cnic_cnt);
13971 /* add another SB for VF as it has no default SB */
13972 max_non_def_sbs += is_vf ? 1 : 0;
13974 /* Maximum number of RSS queues: one IGU SB goes to CNIC */
13975 rss_count = max_non_def_sbs - cnic_cnt;
13980 /* Maximum number of netdev Rx queues: RSS + FCoE L2 */
13981 rx_count = rss_count + cnic_cnt;
13983 /* Maximum number of netdev Tx queues:
13984 * Maximum TSS queues * Maximum supported number of CoS + FCoE L2
13986 tx_count = rss_count * max_cos_est + cnic_cnt;
13988 /* dev zeroed in init_etherdev */
13989 dev = alloc_etherdev_mqs(sizeof(*bp), tx_count, rx_count);
13993 bp = netdev_priv(dev);
13997 bp->flags |= IS_VF_FLAG;
13999 bp->igu_sb_cnt = max_non_def_sbs;
14000 bp->igu_base_addr = IS_VF(bp) ? PXP_VF_ADDR_IGU_START : BAR_IGU_INTMEM;
14001 bp->msg_enable = debug;
14002 bp->cnic_support = cnic_cnt;
14003 bp->cnic_probe = bnx2x_cnic_probe;
14005 pci_set_drvdata(pdev, dev);
14007 rc = bnx2x_init_dev(bp, pdev, dev, ent->driver_data);
14013 BNX2X_DEV_INFO("This is a %s function\n",
14014 IS_PF(bp) ? "physical" : "virtual");
14015 BNX2X_DEV_INFO("Cnic support is %s\n", CNIC_SUPPORT(bp) ? "on" : "off");
14016 BNX2X_DEV_INFO("Max num of status blocks %d\n", max_non_def_sbs);
14017 BNX2X_DEV_INFO("Allocated netdev with %d tx and %d rx queues\n",
14018 tx_count, rx_count);
14020 rc = bnx2x_init_bp(bp);
14022 goto init_one_exit;
14024 /* Map doorbells here as we need the real value of bp->max_cos which
14025 * is initialized in bnx2x_init_bp() to determine the number of
14029 bp->doorbells = bnx2x_vf_doorbells(bp);
14030 rc = bnx2x_vf_pci_alloc(bp);
14032 goto init_one_freemem;
14034 doorbell_size = BNX2X_L2_MAX_CID(bp) * (1 << BNX2X_DB_SHIFT);
14035 if (doorbell_size > pci_resource_len(pdev, 2)) {
14036 dev_err(&bp->pdev->dev,
14037 "Cannot map doorbells, bar size too small, aborting\n");
14039 goto init_one_freemem;
14041 bp->doorbells = ioremap_nocache(pci_resource_start(pdev, 2),
14044 if (!bp->doorbells) {
14045 dev_err(&bp->pdev->dev,
14046 "Cannot map doorbell space, aborting\n");
14048 goto init_one_freemem;
14052 rc = bnx2x_vfpf_acquire(bp, tx_count, rx_count);
14054 goto init_one_freemem;
14056 #ifdef CONFIG_BNX2X_SRIOV
14057 /* VF with OLD Hypervisor or old PF do not support filtering */
14058 if (bp->acquire_resp.pfdev_info.pf_cap & PFVF_CAP_VLAN_FILTER) {
14059 dev->hw_features |= NETIF_F_HW_VLAN_CTAG_FILTER;
14060 dev->features |= NETIF_F_HW_VLAN_CTAG_FILTER;
14065 /* Enable SRIOV if capability found in configuration space */
14066 rc = bnx2x_iov_init_one(bp, int_mode, BNX2X_MAX_NUM_OF_VFS);
14068 goto init_one_freemem;
14070 /* calc qm_cid_count */
14071 bp->qm_cid_count = bnx2x_set_qm_cid_count(bp);
14072 BNX2X_DEV_INFO("qm_cid_count %d\n", bp->qm_cid_count);
14074 /* disable FCOE L2 queue for E1x*/
14075 if (CHIP_IS_E1x(bp))
14076 bp->flags |= NO_FCOE_FLAG;
14078 /* Set bp->num_queues for MSI-X mode*/
14079 bnx2x_set_num_queues(bp);
14081 /* Configure interrupt mode: try to enable MSI-X/MSI if
14084 rc = bnx2x_set_int_mode(bp);
14086 dev_err(&pdev->dev, "Cannot set interrupts\n");
14087 goto init_one_freemem;
14089 BNX2X_DEV_INFO("set interrupts successfully\n");
14091 /* register the net device */
14092 rc = register_netdev(dev);
14094 dev_err(&pdev->dev, "Cannot register net device\n");
14095 goto init_one_freemem;
14097 BNX2X_DEV_INFO("device name after netdev register %s\n", dev->name);
14099 if (!NO_FCOE(bp)) {
14100 /* Add storage MAC address */
14102 dev_addr_add(bp->dev, bp->fip_mac, NETDEV_HW_ADDR_T_SAN);
14106 "%s (%c%d) PCI-E found at mem %lx, IRQ %d, node addr %pM\n",
14107 board_info[ent->driver_data].name,
14108 (CHIP_REV(bp) >> 12) + 'A', (CHIP_METAL(bp) >> 4),
14109 dev->base_addr, bp->pdev->irq, dev->dev_addr);
14110 pcie_print_link_status(bp->pdev);
14112 if (!IS_MF_SD_STORAGE_PERSONALITY_ONLY(bp))
14113 bnx2x_set_os_driver_state(bp, OS_DRIVER_STATE_DISABLED);
14118 bnx2x_free_mem_bp(bp);
14121 bnx2x_disable_pcie_error_reporting(bp);
14124 iounmap(bp->regview);
14126 if (IS_PF(bp) && bp->doorbells)
14127 iounmap(bp->doorbells);
14131 if (atomic_read(&pdev->enable_cnt) == 1)
14132 pci_release_regions(pdev);
14134 pci_disable_device(pdev);
14139 static void __bnx2x_remove(struct pci_dev *pdev,
14140 struct net_device *dev,
14142 bool remove_netdev)
14144 /* Delete storage MAC address */
14145 if (!NO_FCOE(bp)) {
14147 dev_addr_del(bp->dev, bp->fip_mac, NETDEV_HW_ADDR_T_SAN);
14152 /* Delete app tlvs from dcbnl */
14153 bnx2x_dcbnl_update_applist(bp, true);
14158 (bp->flags & BC_SUPPORTS_RMMOD_CMD))
14159 bnx2x_fw_command(bp, DRV_MSG_CODE_RMMOD, 0);
14161 /* Close the interface - either directly or implicitly */
14162 if (remove_netdev) {
14163 unregister_netdev(dev);
14170 bnx2x_iov_remove_one(bp);
14172 /* Power on: we can't let PCI layer write to us while we are in D3 */
14174 bnx2x_set_power_state(bp, PCI_D0);
14175 bnx2x_set_os_driver_state(bp, OS_DRIVER_STATE_NOT_LOADED);
14177 /* Set endianity registers to reset values in case next driver
14178 * boots in different endianty environment.
14180 bnx2x_reset_endianity(bp);
14183 /* Disable MSI/MSI-X */
14184 bnx2x_disable_msi(bp);
14188 bnx2x_set_power_state(bp, PCI_D3hot);
14190 /* Make sure RESET task is not scheduled before continuing */
14191 cancel_delayed_work_sync(&bp->sp_rtnl_task);
14193 /* send message via vfpf channel to release the resources of this vf */
14195 bnx2x_vfpf_release(bp);
14197 /* Assumes no further PCIe PM changes will occur */
14198 if (system_state == SYSTEM_POWER_OFF) {
14199 pci_wake_from_d3(pdev, bp->wol);
14200 pci_set_power_state(pdev, PCI_D3hot);
14203 bnx2x_disable_pcie_error_reporting(bp);
14204 if (remove_netdev) {
14206 iounmap(bp->regview);
14208 /* For vfs, doorbells are part of the regview and were unmapped
14209 * along with it. FW is only loaded by PF.
14213 iounmap(bp->doorbells);
14215 bnx2x_release_firmware(bp);
14217 bnx2x_vf_pci_dealloc(bp);
14219 bnx2x_free_mem_bp(bp);
14223 if (atomic_read(&pdev->enable_cnt) == 1)
14224 pci_release_regions(pdev);
14226 pci_disable_device(pdev);
14230 static void bnx2x_remove_one(struct pci_dev *pdev)
14232 struct net_device *dev = pci_get_drvdata(pdev);
14236 dev_err(&pdev->dev, "BAD net device from bnx2x_init_one\n");
14239 bp = netdev_priv(dev);
14241 __bnx2x_remove(pdev, dev, bp, true);
14244 static int bnx2x_eeh_nic_unload(struct bnx2x *bp)
14246 bp->state = BNX2X_STATE_CLOSING_WAIT4_HALT;
14248 bp->rx_mode = BNX2X_RX_MODE_NONE;
14250 if (CNIC_LOADED(bp))
14251 bnx2x_cnic_notify(bp, CNIC_CTL_STOP_CMD);
14254 bnx2x_tx_disable(bp);
14255 /* Delete all NAPI objects */
14256 bnx2x_del_all_napi(bp);
14257 if (CNIC_LOADED(bp))
14258 bnx2x_del_all_napi_cnic(bp);
14259 netdev_reset_tc(bp->dev);
14261 del_timer_sync(&bp->timer);
14262 cancel_delayed_work_sync(&bp->sp_task);
14263 cancel_delayed_work_sync(&bp->period_task);
14265 if (!down_timeout(&bp->stats_lock, HZ / 10)) {
14266 bp->stats_state = STATS_STATE_DISABLED;
14267 up(&bp->stats_lock);
14270 bnx2x_save_statistics(bp);
14272 netif_carrier_off(bp->dev);
14278 * bnx2x_io_error_detected - called when PCI error is detected
14279 * @pdev: Pointer to PCI device
14280 * @state: The current pci connection state
14282 * This function is called after a PCI bus error affecting
14283 * this device has been detected.
14285 static pci_ers_result_t bnx2x_io_error_detected(struct pci_dev *pdev,
14286 pci_channel_state_t state)
14288 struct net_device *dev = pci_get_drvdata(pdev);
14289 struct bnx2x *bp = netdev_priv(dev);
14293 BNX2X_ERR("IO error detected\n");
14295 netif_device_detach(dev);
14297 if (state == pci_channel_io_perm_failure) {
14299 return PCI_ERS_RESULT_DISCONNECT;
14302 if (netif_running(dev))
14303 bnx2x_eeh_nic_unload(bp);
14305 bnx2x_prev_path_mark_eeh(bp);
14307 pci_disable_device(pdev);
14311 /* Request a slot reset */
14312 return PCI_ERS_RESULT_NEED_RESET;
14316 * bnx2x_io_slot_reset - called after the PCI bus has been reset
14317 * @pdev: Pointer to PCI device
14319 * Restart the card from scratch, as if from a cold-boot.
14321 static pci_ers_result_t bnx2x_io_slot_reset(struct pci_dev *pdev)
14323 struct net_device *dev = pci_get_drvdata(pdev);
14324 struct bnx2x *bp = netdev_priv(dev);
14328 BNX2X_ERR("IO slot reset initializing...\n");
14329 if (pci_enable_device(pdev)) {
14330 dev_err(&pdev->dev,
14331 "Cannot re-enable PCI device after reset\n");
14333 return PCI_ERS_RESULT_DISCONNECT;
14336 pci_set_master(pdev);
14337 pci_restore_state(pdev);
14338 pci_save_state(pdev);
14340 if (netif_running(dev))
14341 bnx2x_set_power_state(bp, PCI_D0);
14343 if (netif_running(dev)) {
14344 BNX2X_ERR("IO slot reset --> driver unload\n");
14346 /* MCP should have been reset; Need to wait for validity */
14347 if (bnx2x_init_shmem(bp)) {
14349 return PCI_ERS_RESULT_DISCONNECT;
14352 if (IS_PF(bp) && SHMEM2_HAS(bp, drv_capabilities_flag)) {
14356 drv_capabilities_flag[BP_FW_MB_IDX(bp)]);
14357 SHMEM2_WR(bp, drv_capabilities_flag[BP_FW_MB_IDX(bp)],
14358 v & ~DRV_FLAGS_CAPABILITIES_LOADED_L2);
14360 bnx2x_drain_tx_queues(bp);
14361 bnx2x_send_unload_req(bp, UNLOAD_RECOVERY);
14362 bnx2x_netif_stop(bp, 1);
14363 bnx2x_free_irq(bp);
14365 /* Report UNLOAD_DONE to MCP */
14366 bnx2x_send_unload_done(bp, true);
14371 bnx2x_prev_unload(bp);
14373 /* We should have reseted the engine, so It's fair to
14374 * assume the FW will no longer write to the bnx2x driver.
14376 bnx2x_squeeze_objects(bp);
14377 bnx2x_free_skbs(bp);
14378 for_each_rx_queue(bp, i)
14379 bnx2x_free_rx_sge_range(bp, bp->fp + i, NUM_RX_SGE);
14380 bnx2x_free_fp_mem(bp);
14381 bnx2x_free_mem(bp);
14383 bp->state = BNX2X_STATE_CLOSED;
14388 return PCI_ERS_RESULT_RECOVERED;
14392 * bnx2x_io_resume - called when traffic can start flowing again
14393 * @pdev: Pointer to PCI device
14395 * This callback is called when the error recovery driver tells us that
14396 * its OK to resume normal operation.
14398 static void bnx2x_io_resume(struct pci_dev *pdev)
14400 struct net_device *dev = pci_get_drvdata(pdev);
14401 struct bnx2x *bp = netdev_priv(dev);
14403 if (bp->recovery_state != BNX2X_RECOVERY_DONE) {
14404 netdev_err(bp->dev, "Handling parity error recovery. Try again later\n");
14410 bp->fw_seq = SHMEM_RD(bp, func_mb[BP_FW_MB_IDX(bp)].drv_mb_header) &
14411 DRV_MSG_SEQ_NUMBER_MASK;
14413 if (netif_running(dev))
14414 bnx2x_nic_load(bp, LOAD_NORMAL);
14416 netif_device_attach(dev);
14421 static const struct pci_error_handlers bnx2x_err_handler = {
14422 .error_detected = bnx2x_io_error_detected,
14423 .slot_reset = bnx2x_io_slot_reset,
14424 .resume = bnx2x_io_resume,
14427 static void bnx2x_shutdown(struct pci_dev *pdev)
14429 struct net_device *dev = pci_get_drvdata(pdev);
14435 bp = netdev_priv(dev);
14440 netif_device_detach(dev);
14443 /* Don't remove the netdevice, as there are scenarios which will cause
14444 * the kernel to hang, e.g., when trying to remove bnx2i while the
14445 * rootfs is mounted from SAN.
14447 __bnx2x_remove(pdev, dev, bp, false);
14450 static struct pci_driver bnx2x_pci_driver = {
14451 .name = DRV_MODULE_NAME,
14452 .id_table = bnx2x_pci_tbl,
14453 .probe = bnx2x_init_one,
14454 .remove = bnx2x_remove_one,
14455 .suspend = bnx2x_suspend,
14456 .resume = bnx2x_resume,
14457 .err_handler = &bnx2x_err_handler,
14458 #ifdef CONFIG_BNX2X_SRIOV
14459 .sriov_configure = bnx2x_sriov_configure,
14461 .shutdown = bnx2x_shutdown,
14464 static int __init bnx2x_init(void)
14468 pr_info("%s", version);
14470 bnx2x_wq = create_singlethread_workqueue("bnx2x");
14471 if (bnx2x_wq == NULL) {
14472 pr_err("Cannot create workqueue\n");
14475 bnx2x_iov_wq = create_singlethread_workqueue("bnx2x_iov");
14476 if (!bnx2x_iov_wq) {
14477 pr_err("Cannot create iov workqueue\n");
14478 destroy_workqueue(bnx2x_wq);
14482 ret = pci_register_driver(&bnx2x_pci_driver);
14484 pr_err("Cannot register driver\n");
14485 destroy_workqueue(bnx2x_wq);
14486 destroy_workqueue(bnx2x_iov_wq);
14491 static void __exit bnx2x_cleanup(void)
14493 struct list_head *pos, *q;
14495 pci_unregister_driver(&bnx2x_pci_driver);
14497 destroy_workqueue(bnx2x_wq);
14498 destroy_workqueue(bnx2x_iov_wq);
14500 /* Free globally allocated resources */
14501 list_for_each_safe(pos, q, &bnx2x_prev_list) {
14502 struct bnx2x_prev_path_list *tmp =
14503 list_entry(pos, struct bnx2x_prev_path_list, list);
14509 void bnx2x_notify_link_changed(struct bnx2x *bp)
14511 REG_WR(bp, MISC_REG_AEU_GENERAL_ATTN_12 + BP_FUNC(bp)*sizeof(u32), 1);
14514 module_init(bnx2x_init);
14515 module_exit(bnx2x_cleanup);
14518 * bnx2x_set_iscsi_eth_mac_addr - set iSCSI MAC(s).
14520 * @bp: driver handle
14521 * @set: set or clear the CAM entry
14523 * This function will wait until the ramrod completion returns.
14524 * Return 0 if success, -ENODEV if ramrod doesn't return.
14526 static int bnx2x_set_iscsi_eth_mac_addr(struct bnx2x *bp)
14528 unsigned long ramrod_flags = 0;
14530 __set_bit(RAMROD_COMP_WAIT, &ramrod_flags);
14531 return bnx2x_set_mac_one(bp, bp->cnic_eth_dev.iscsi_mac,
14532 &bp->iscsi_l2_mac_obj, true,
14533 BNX2X_ISCSI_ETH_MAC, &ramrod_flags);
14536 /* count denotes the number of new completions we have seen */
14537 static void bnx2x_cnic_sp_post(struct bnx2x *bp, int count)
14539 struct eth_spe *spe;
14540 int cxt_index, cxt_offset;
14542 #ifdef BNX2X_STOP_ON_ERROR
14543 if (unlikely(bp->panic))
14547 spin_lock_bh(&bp->spq_lock);
14548 BUG_ON(bp->cnic_spq_pending < count);
14549 bp->cnic_spq_pending -= count;
14551 for (; bp->cnic_kwq_pending; bp->cnic_kwq_pending--) {
14552 u16 type = (le16_to_cpu(bp->cnic_kwq_cons->hdr.type)
14553 & SPE_HDR_CONN_TYPE) >>
14554 SPE_HDR_CONN_TYPE_SHIFT;
14555 u8 cmd = (le32_to_cpu(bp->cnic_kwq_cons->hdr.conn_and_cmd_data)
14556 >> SPE_HDR_CMD_ID_SHIFT) & 0xff;
14558 /* Set validation for iSCSI L2 client before sending SETUP
14561 if (type == ETH_CONNECTION_TYPE) {
14562 if (cmd == RAMROD_CMD_ID_ETH_CLIENT_SETUP) {
14563 cxt_index = BNX2X_ISCSI_ETH_CID(bp) /
14565 cxt_offset = BNX2X_ISCSI_ETH_CID(bp) -
14566 (cxt_index * ILT_PAGE_CIDS);
14567 bnx2x_set_ctx_validation(bp,
14568 &bp->context[cxt_index].
14569 vcxt[cxt_offset].eth,
14570 BNX2X_ISCSI_ETH_CID(bp));
14575 * There may be not more than 8 L2, not more than 8 L5 SPEs
14576 * and in the air. We also check that number of outstanding
14577 * COMMON ramrods is not more than the EQ and SPQ can
14580 if (type == ETH_CONNECTION_TYPE) {
14581 if (!atomic_read(&bp->cq_spq_left))
14584 atomic_dec(&bp->cq_spq_left);
14585 } else if (type == NONE_CONNECTION_TYPE) {
14586 if (!atomic_read(&bp->eq_spq_left))
14589 atomic_dec(&bp->eq_spq_left);
14590 } else if ((type == ISCSI_CONNECTION_TYPE) ||
14591 (type == FCOE_CONNECTION_TYPE)) {
14592 if (bp->cnic_spq_pending >=
14593 bp->cnic_eth_dev.max_kwqe_pending)
14596 bp->cnic_spq_pending++;
14598 BNX2X_ERR("Unknown SPE type: %d\n", type);
14603 spe = bnx2x_sp_get_next(bp);
14604 *spe = *bp->cnic_kwq_cons;
14606 DP(BNX2X_MSG_SP, "pending on SPQ %d, on KWQ %d count %d\n",
14607 bp->cnic_spq_pending, bp->cnic_kwq_pending, count);
14609 if (bp->cnic_kwq_cons == bp->cnic_kwq_last)
14610 bp->cnic_kwq_cons = bp->cnic_kwq;
14612 bp->cnic_kwq_cons++;
14614 bnx2x_sp_prod_update(bp);
14615 spin_unlock_bh(&bp->spq_lock);
14618 static int bnx2x_cnic_sp_queue(struct net_device *dev,
14619 struct kwqe_16 *kwqes[], u32 count)
14621 struct bnx2x *bp = netdev_priv(dev);
14624 #ifdef BNX2X_STOP_ON_ERROR
14625 if (unlikely(bp->panic)) {
14626 BNX2X_ERR("Can't post to SP queue while panic\n");
14631 if ((bp->recovery_state != BNX2X_RECOVERY_DONE) &&
14632 (bp->recovery_state != BNX2X_RECOVERY_NIC_LOADING)) {
14633 BNX2X_ERR("Handling parity error recovery. Try again later\n");
14637 spin_lock_bh(&bp->spq_lock);
14639 for (i = 0; i < count; i++) {
14640 struct eth_spe *spe = (struct eth_spe *)kwqes[i];
14642 if (bp->cnic_kwq_pending == MAX_SP_DESC_CNT)
14645 *bp->cnic_kwq_prod = *spe;
14647 bp->cnic_kwq_pending++;
14649 DP(BNX2X_MSG_SP, "L5 SPQE %x %x %x:%x pos %d\n",
14650 spe->hdr.conn_and_cmd_data, spe->hdr.type,
14651 spe->data.update_data_addr.hi,
14652 spe->data.update_data_addr.lo,
14653 bp->cnic_kwq_pending);
14655 if (bp->cnic_kwq_prod == bp->cnic_kwq_last)
14656 bp->cnic_kwq_prod = bp->cnic_kwq;
14658 bp->cnic_kwq_prod++;
14661 spin_unlock_bh(&bp->spq_lock);
14663 if (bp->cnic_spq_pending < bp->cnic_eth_dev.max_kwqe_pending)
14664 bnx2x_cnic_sp_post(bp, 0);
14669 static int bnx2x_cnic_ctl_send(struct bnx2x *bp, struct cnic_ctl_info *ctl)
14671 struct cnic_ops *c_ops;
14674 mutex_lock(&bp->cnic_mutex);
14675 c_ops = rcu_dereference_protected(bp->cnic_ops,
14676 lockdep_is_held(&bp->cnic_mutex));
14678 rc = c_ops->cnic_ctl(bp->cnic_data, ctl);
14679 mutex_unlock(&bp->cnic_mutex);
14684 static int bnx2x_cnic_ctl_send_bh(struct bnx2x *bp, struct cnic_ctl_info *ctl)
14686 struct cnic_ops *c_ops;
14690 c_ops = rcu_dereference(bp->cnic_ops);
14692 rc = c_ops->cnic_ctl(bp->cnic_data, ctl);
14699 * for commands that have no data
14701 int bnx2x_cnic_notify(struct bnx2x *bp, int cmd)
14703 struct cnic_ctl_info ctl = {0};
14707 return bnx2x_cnic_ctl_send(bp, &ctl);
14710 static void bnx2x_cnic_cfc_comp(struct bnx2x *bp, int cid, u8 err)
14712 struct cnic_ctl_info ctl = {0};
14714 /* first we tell CNIC and only then we count this as a completion */
14715 ctl.cmd = CNIC_CTL_COMPLETION_CMD;
14716 ctl.data.comp.cid = cid;
14717 ctl.data.comp.error = err;
14719 bnx2x_cnic_ctl_send_bh(bp, &ctl);
14720 bnx2x_cnic_sp_post(bp, 0);
14723 /* Called with netif_addr_lock_bh() taken.
14724 * Sets an rx_mode config for an iSCSI ETH client.
14726 * Completion should be checked outside.
14728 static void bnx2x_set_iscsi_eth_rx_mode(struct bnx2x *bp, bool start)
14730 unsigned long accept_flags = 0, ramrod_flags = 0;
14731 u8 cl_id = bnx2x_cnic_eth_cl_id(bp, BNX2X_ISCSI_ETH_CL_ID_IDX);
14732 int sched_state = BNX2X_FILTER_ISCSI_ETH_STOP_SCHED;
14735 /* Start accepting on iSCSI L2 ring. Accept all multicasts
14736 * because it's the only way for UIO Queue to accept
14737 * multicasts (in non-promiscuous mode only one Queue per
14738 * function will receive multicast packets (leading in our
14741 __set_bit(BNX2X_ACCEPT_UNICAST, &accept_flags);
14742 __set_bit(BNX2X_ACCEPT_ALL_MULTICAST, &accept_flags);
14743 __set_bit(BNX2X_ACCEPT_BROADCAST, &accept_flags);
14744 __set_bit(BNX2X_ACCEPT_ANY_VLAN, &accept_flags);
14746 /* Clear STOP_PENDING bit if START is requested */
14747 clear_bit(BNX2X_FILTER_ISCSI_ETH_STOP_SCHED, &bp->sp_state);
14749 sched_state = BNX2X_FILTER_ISCSI_ETH_START_SCHED;
14751 /* Clear START_PENDING bit if STOP is requested */
14752 clear_bit(BNX2X_FILTER_ISCSI_ETH_START_SCHED, &bp->sp_state);
14754 if (test_bit(BNX2X_FILTER_RX_MODE_PENDING, &bp->sp_state))
14755 set_bit(sched_state, &bp->sp_state);
14757 __set_bit(RAMROD_RX, &ramrod_flags);
14758 bnx2x_set_q_rx_mode(bp, cl_id, 0, accept_flags, 0,
14763 static int bnx2x_drv_ctl(struct net_device *dev, struct drv_ctl_info *ctl)
14765 struct bnx2x *bp = netdev_priv(dev);
14768 switch (ctl->cmd) {
14769 case DRV_CTL_CTXTBL_WR_CMD: {
14770 u32 index = ctl->data.io.offset;
14771 dma_addr_t addr = ctl->data.io.dma_addr;
14773 bnx2x_ilt_wr(bp, index, addr);
14777 case DRV_CTL_RET_L5_SPQ_CREDIT_CMD: {
14778 int count = ctl->data.credit.credit_count;
14780 bnx2x_cnic_sp_post(bp, count);
14784 /* rtnl_lock is held. */
14785 case DRV_CTL_START_L2_CMD: {
14786 struct cnic_eth_dev *cp = &bp->cnic_eth_dev;
14787 unsigned long sp_bits = 0;
14789 /* Configure the iSCSI classification object */
14790 bnx2x_init_mac_obj(bp, &bp->iscsi_l2_mac_obj,
14791 cp->iscsi_l2_client_id,
14792 cp->iscsi_l2_cid, BP_FUNC(bp),
14793 bnx2x_sp(bp, mac_rdata),
14794 bnx2x_sp_mapping(bp, mac_rdata),
14795 BNX2X_FILTER_MAC_PENDING,
14796 &bp->sp_state, BNX2X_OBJ_TYPE_RX,
14799 /* Set iSCSI MAC address */
14800 rc = bnx2x_set_iscsi_eth_mac_addr(bp);
14806 /* Start accepting on iSCSI L2 ring */
14808 netif_addr_lock_bh(dev);
14809 bnx2x_set_iscsi_eth_rx_mode(bp, true);
14810 netif_addr_unlock_bh(dev);
14812 /* bits to wait on */
14813 __set_bit(BNX2X_FILTER_RX_MODE_PENDING, &sp_bits);
14814 __set_bit(BNX2X_FILTER_ISCSI_ETH_START_SCHED, &sp_bits);
14816 if (!bnx2x_wait_sp_comp(bp, sp_bits))
14817 BNX2X_ERR("rx_mode completion timed out!\n");
14822 /* rtnl_lock is held. */
14823 case DRV_CTL_STOP_L2_CMD: {
14824 unsigned long sp_bits = 0;
14826 /* Stop accepting on iSCSI L2 ring */
14827 netif_addr_lock_bh(dev);
14828 bnx2x_set_iscsi_eth_rx_mode(bp, false);
14829 netif_addr_unlock_bh(dev);
14831 /* bits to wait on */
14832 __set_bit(BNX2X_FILTER_RX_MODE_PENDING, &sp_bits);
14833 __set_bit(BNX2X_FILTER_ISCSI_ETH_STOP_SCHED, &sp_bits);
14835 if (!bnx2x_wait_sp_comp(bp, sp_bits))
14836 BNX2X_ERR("rx_mode completion timed out!\n");
14840 /* Unset iSCSI L2 MAC */
14841 rc = bnx2x_del_all_macs(bp, &bp->iscsi_l2_mac_obj,
14842 BNX2X_ISCSI_ETH_MAC, true);
14845 case DRV_CTL_RET_L2_SPQ_CREDIT_CMD: {
14846 int count = ctl->data.credit.credit_count;
14848 smp_mb__before_atomic();
14849 atomic_add(count, &bp->cq_spq_left);
14850 smp_mb__after_atomic();
14853 case DRV_CTL_ULP_REGISTER_CMD: {
14854 int ulp_type = ctl->data.register_data.ulp_type;
14856 if (CHIP_IS_E3(bp)) {
14857 int idx = BP_FW_MB_IDX(bp);
14858 u32 cap = SHMEM2_RD(bp, drv_capabilities_flag[idx]);
14859 int path = BP_PATH(bp);
14860 int port = BP_PORT(bp);
14862 u32 scratch_offset;
14865 /* first write capability to shmem2 */
14866 if (ulp_type == CNIC_ULP_ISCSI)
14867 cap |= DRV_FLAGS_CAPABILITIES_LOADED_ISCSI;
14868 else if (ulp_type == CNIC_ULP_FCOE)
14869 cap |= DRV_FLAGS_CAPABILITIES_LOADED_FCOE;
14870 SHMEM2_WR(bp, drv_capabilities_flag[idx], cap);
14872 if ((ulp_type != CNIC_ULP_FCOE) ||
14873 (!SHMEM2_HAS(bp, ncsi_oem_data_addr)) ||
14874 (!(bp->flags & BC_SUPPORTS_FCOE_FEATURES)))
14877 /* if reached here - should write fcoe capabilities */
14878 scratch_offset = SHMEM2_RD(bp, ncsi_oem_data_addr);
14879 if (!scratch_offset)
14881 scratch_offset += offsetof(struct glob_ncsi_oem_data,
14882 fcoe_features[path][port]);
14883 host_addr = (u32 *) &(ctl->data.register_data.
14885 for (i = 0; i < sizeof(struct fcoe_capabilities);
14887 REG_WR(bp, scratch_offset + i,
14888 *(host_addr + i/4));
14890 bnx2x_schedule_sp_rtnl(bp, BNX2X_SP_RTNL_GET_DRV_VERSION, 0);
14894 case DRV_CTL_ULP_UNREGISTER_CMD: {
14895 int ulp_type = ctl->data.ulp_type;
14897 if (CHIP_IS_E3(bp)) {
14898 int idx = BP_FW_MB_IDX(bp);
14901 cap = SHMEM2_RD(bp, drv_capabilities_flag[idx]);
14902 if (ulp_type == CNIC_ULP_ISCSI)
14903 cap &= ~DRV_FLAGS_CAPABILITIES_LOADED_ISCSI;
14904 else if (ulp_type == CNIC_ULP_FCOE)
14905 cap &= ~DRV_FLAGS_CAPABILITIES_LOADED_FCOE;
14906 SHMEM2_WR(bp, drv_capabilities_flag[idx], cap);
14908 bnx2x_schedule_sp_rtnl(bp, BNX2X_SP_RTNL_GET_DRV_VERSION, 0);
14913 BNX2X_ERR("unknown command %x\n", ctl->cmd);
14917 /* For storage-only interfaces, change driver state */
14918 if (IS_MF_SD_STORAGE_PERSONALITY_ONLY(bp)) {
14919 switch (ctl->drv_state) {
14923 bnx2x_set_os_driver_state(bp,
14924 OS_DRIVER_STATE_ACTIVE);
14927 bnx2x_set_os_driver_state(bp,
14928 OS_DRIVER_STATE_DISABLED);
14931 bnx2x_set_os_driver_state(bp,
14932 OS_DRIVER_STATE_NOT_LOADED);
14935 BNX2X_ERR("Unknown cnic driver state: %d\n", ctl->drv_state);
14942 static int bnx2x_get_fc_npiv(struct net_device *dev,
14943 struct cnic_fc_npiv_tbl *cnic_tbl)
14945 struct bnx2x *bp = netdev_priv(dev);
14946 struct bdn_fc_npiv_tbl *tbl = NULL;
14947 u32 offset, entries;
14951 if (!SHMEM2_HAS(bp, fc_npiv_nvram_tbl_addr[0]))
14954 DP(BNX2X_MSG_MCP, "About to read the FC-NPIV table\n");
14956 tbl = kmalloc(sizeof(*tbl), GFP_KERNEL);
14958 BNX2X_ERR("Failed to allocate fc_npiv table\n");
14962 offset = SHMEM2_RD(bp, fc_npiv_nvram_tbl_addr[BP_PORT(bp)]);
14964 DP(BNX2X_MSG_MCP, "No FC-NPIV in NVRAM\n");
14967 DP(BNX2X_MSG_MCP, "Offset of FC-NPIV in NVRAM: %08x\n", offset);
14969 /* Read the table contents from nvram */
14970 if (bnx2x_nvram_read(bp, offset, (u8 *)tbl, sizeof(*tbl))) {
14971 BNX2X_ERR("Failed to read FC-NPIV table\n");
14975 /* Since bnx2x_nvram_read() returns data in be32, we need to convert
14976 * the number of entries back to cpu endianness.
14978 entries = tbl->fc_npiv_cfg.num_of_npiv;
14979 entries = (__force u32)be32_to_cpu((__force __be32)entries);
14980 tbl->fc_npiv_cfg.num_of_npiv = entries;
14982 if (!tbl->fc_npiv_cfg.num_of_npiv) {
14984 "No FC-NPIV table [valid, simply not present]\n");
14986 } else if (tbl->fc_npiv_cfg.num_of_npiv > MAX_NUMBER_NPIV) {
14987 BNX2X_ERR("FC-NPIV table with bad length 0x%08x\n",
14988 tbl->fc_npiv_cfg.num_of_npiv);
14991 DP(BNX2X_MSG_MCP, "Read 0x%08x entries from NVRAM\n",
14992 tbl->fc_npiv_cfg.num_of_npiv);
14995 /* Copy the data into cnic-provided struct */
14996 cnic_tbl->count = tbl->fc_npiv_cfg.num_of_npiv;
14997 for (i = 0; i < cnic_tbl->count; i++) {
14998 memcpy(cnic_tbl->wwpn[i], tbl->settings[i].npiv_wwpn, 8);
14999 memcpy(cnic_tbl->wwnn[i], tbl->settings[i].npiv_wwnn, 8);
15008 void bnx2x_setup_cnic_irq_info(struct bnx2x *bp)
15010 struct cnic_eth_dev *cp = &bp->cnic_eth_dev;
15012 if (bp->flags & USING_MSIX_FLAG) {
15013 cp->drv_state |= CNIC_DRV_STATE_USING_MSIX;
15014 cp->irq_arr[0].irq_flags |= CNIC_IRQ_FL_MSIX;
15015 cp->irq_arr[0].vector = bp->msix_table[1].vector;
15017 cp->drv_state &= ~CNIC_DRV_STATE_USING_MSIX;
15018 cp->irq_arr[0].irq_flags &= ~CNIC_IRQ_FL_MSIX;
15020 if (!CHIP_IS_E1x(bp))
15021 cp->irq_arr[0].status_blk = (void *)bp->cnic_sb.e2_sb;
15023 cp->irq_arr[0].status_blk = (void *)bp->cnic_sb.e1x_sb;
15025 cp->irq_arr[0].status_blk_num = bnx2x_cnic_fw_sb_id(bp);
15026 cp->irq_arr[0].status_blk_num2 = bnx2x_cnic_igu_sb_id(bp);
15027 cp->irq_arr[1].status_blk = bp->def_status_blk;
15028 cp->irq_arr[1].status_blk_num = DEF_SB_ID;
15029 cp->irq_arr[1].status_blk_num2 = DEF_SB_IGU_ID;
15034 void bnx2x_setup_cnic_info(struct bnx2x *bp)
15036 struct cnic_eth_dev *cp = &bp->cnic_eth_dev;
15038 cp->ctx_tbl_offset = FUNC_ILT_BASE(BP_FUNC(bp)) +
15039 bnx2x_cid_ilt_lines(bp);
15040 cp->starting_cid = bnx2x_cid_ilt_lines(bp) * ILT_PAGE_CIDS;
15041 cp->fcoe_init_cid = BNX2X_FCOE_ETH_CID(bp);
15042 cp->iscsi_l2_cid = BNX2X_ISCSI_ETH_CID(bp);
15044 DP(NETIF_MSG_IFUP, "BNX2X_1st_NON_L2_ETH_CID(bp) %x, cp->starting_cid %x, cp->fcoe_init_cid %x, cp->iscsi_l2_cid %x\n",
15045 BNX2X_1st_NON_L2_ETH_CID(bp), cp->starting_cid, cp->fcoe_init_cid,
15048 if (NO_ISCSI_OOO(bp))
15049 cp->drv_state |= CNIC_DRV_STATE_NO_ISCSI_OOO;
15052 static int bnx2x_register_cnic(struct net_device *dev, struct cnic_ops *ops,
15055 struct bnx2x *bp = netdev_priv(dev);
15056 struct cnic_eth_dev *cp = &bp->cnic_eth_dev;
15059 DP(NETIF_MSG_IFUP, "Register_cnic called\n");
15062 BNX2X_ERR("NULL ops received\n");
15066 if (!CNIC_SUPPORT(bp)) {
15067 BNX2X_ERR("Can't register CNIC when not supported\n");
15068 return -EOPNOTSUPP;
15071 if (!CNIC_LOADED(bp)) {
15072 rc = bnx2x_load_cnic(bp);
15074 BNX2X_ERR("CNIC-related load failed\n");
15079 bp->cnic_enabled = true;
15081 bp->cnic_kwq = kzalloc(PAGE_SIZE, GFP_KERNEL);
15085 bp->cnic_kwq_cons = bp->cnic_kwq;
15086 bp->cnic_kwq_prod = bp->cnic_kwq;
15087 bp->cnic_kwq_last = bp->cnic_kwq + MAX_SP_DESC_CNT;
15089 bp->cnic_spq_pending = 0;
15090 bp->cnic_kwq_pending = 0;
15092 bp->cnic_data = data;
15095 cp->drv_state |= CNIC_DRV_STATE_REGD;
15096 cp->iro_arr = bp->iro_arr;
15098 bnx2x_setup_cnic_irq_info(bp);
15100 rcu_assign_pointer(bp->cnic_ops, ops);
15102 /* Schedule driver to read CNIC driver versions */
15103 bnx2x_schedule_sp_rtnl(bp, BNX2X_SP_RTNL_GET_DRV_VERSION, 0);
15108 static int bnx2x_unregister_cnic(struct net_device *dev)
15110 struct bnx2x *bp = netdev_priv(dev);
15111 struct cnic_eth_dev *cp = &bp->cnic_eth_dev;
15113 mutex_lock(&bp->cnic_mutex);
15115 RCU_INIT_POINTER(bp->cnic_ops, NULL);
15116 mutex_unlock(&bp->cnic_mutex);
15118 bp->cnic_enabled = false;
15119 kfree(bp->cnic_kwq);
15120 bp->cnic_kwq = NULL;
15125 static struct cnic_eth_dev *bnx2x_cnic_probe(struct net_device *dev)
15127 struct bnx2x *bp = netdev_priv(dev);
15128 struct cnic_eth_dev *cp = &bp->cnic_eth_dev;
15130 /* If both iSCSI and FCoE are disabled - return NULL in
15131 * order to indicate CNIC that it should not try to work
15132 * with this device.
15134 if (NO_ISCSI(bp) && NO_FCOE(bp))
15137 cp->drv_owner = THIS_MODULE;
15138 cp->chip_id = CHIP_ID(bp);
15139 cp->pdev = bp->pdev;
15140 cp->io_base = bp->regview;
15141 cp->io_base2 = bp->doorbells;
15142 cp->max_kwqe_pending = 8;
15143 cp->ctx_blk_size = CDU_ILT_PAGE_SZ;
15144 cp->ctx_tbl_offset = FUNC_ILT_BASE(BP_FUNC(bp)) +
15145 bnx2x_cid_ilt_lines(bp);
15146 cp->ctx_tbl_len = CNIC_ILT_LINES;
15147 cp->starting_cid = bnx2x_cid_ilt_lines(bp) * ILT_PAGE_CIDS;
15148 cp->drv_submit_kwqes_16 = bnx2x_cnic_sp_queue;
15149 cp->drv_ctl = bnx2x_drv_ctl;
15150 cp->drv_get_fc_npiv_tbl = bnx2x_get_fc_npiv;
15151 cp->drv_register_cnic = bnx2x_register_cnic;
15152 cp->drv_unregister_cnic = bnx2x_unregister_cnic;
15153 cp->fcoe_init_cid = BNX2X_FCOE_ETH_CID(bp);
15154 cp->iscsi_l2_client_id =
15155 bnx2x_cnic_eth_cl_id(bp, BNX2X_ISCSI_ETH_CL_ID_IDX);
15156 cp->iscsi_l2_cid = BNX2X_ISCSI_ETH_CID(bp);
15158 if (NO_ISCSI_OOO(bp))
15159 cp->drv_state |= CNIC_DRV_STATE_NO_ISCSI_OOO;
15162 cp->drv_state |= CNIC_DRV_STATE_NO_ISCSI;
15165 cp->drv_state |= CNIC_DRV_STATE_NO_FCOE;
15168 "page_size %d, tbl_offset %d, tbl_lines %d, starting cid %d\n",
15170 cp->ctx_tbl_offset,
15176 static u32 bnx2x_rx_ustorm_prods_offset(struct bnx2x_fastpath *fp)
15178 struct bnx2x *bp = fp->bp;
15179 u32 offset = BAR_USTRORM_INTMEM;
15182 return bnx2x_vf_ustorm_prods_offset(bp, fp);
15183 else if (!CHIP_IS_E1x(bp))
15184 offset += USTORM_RX_PRODS_E2_OFFSET(fp->cl_qzone_id);
15186 offset += USTORM_RX_PRODS_E1X_OFFSET(BP_PORT(bp), fp->cl_id);
15191 /* called only on E1H or E2.
15192 * When pretending to be PF, the pretend value is the function number 0...7
15193 * When pretending to be VF, the pretend val is the PF-num:VF-valid:ABS-VFID
15196 int bnx2x_pretend_func(struct bnx2x *bp, u16 pretend_func_val)
15200 if (CHIP_IS_E1H(bp) && pretend_func_val >= E1H_FUNC_MAX)
15203 /* get my own pretend register */
15204 pretend_reg = bnx2x_get_pretend_reg(bp);
15205 REG_WR(bp, pretend_reg, pretend_func_val);
15206 REG_RD(bp, pretend_reg);
15210 static void bnx2x_ptp_task(struct work_struct *work)
15212 struct bnx2x *bp = container_of(work, struct bnx2x, ptp_task);
15213 int port = BP_PORT(bp);
15216 struct skb_shared_hwtstamps shhwtstamps;
15220 /* FW may take a while to complete timestamping; try a bit and if it's
15221 * still not complete, may indicate an error state - bail out then.
15223 for (i = 0; i < 10; i++) {
15224 /* Read Tx timestamp registers */
15225 val_seq = REG_RD(bp, port ? NIG_REG_P1_TLLH_PTP_BUF_SEQID :
15226 NIG_REG_P0_TLLH_PTP_BUF_SEQID);
15227 if (val_seq & 0x10000) {
15235 /* There is a valid timestamp value */
15236 timestamp = REG_RD(bp, port ? NIG_REG_P1_TLLH_PTP_BUF_TS_MSB :
15237 NIG_REG_P0_TLLH_PTP_BUF_TS_MSB);
15239 timestamp |= REG_RD(bp, port ? NIG_REG_P1_TLLH_PTP_BUF_TS_LSB :
15240 NIG_REG_P0_TLLH_PTP_BUF_TS_LSB);
15241 /* Reset timestamp register to allow new timestamp */
15242 REG_WR(bp, port ? NIG_REG_P1_TLLH_PTP_BUF_SEQID :
15243 NIG_REG_P0_TLLH_PTP_BUF_SEQID, 0x10000);
15244 ns = timecounter_cyc2time(&bp->timecounter, timestamp);
15246 memset(&shhwtstamps, 0, sizeof(shhwtstamps));
15247 shhwtstamps.hwtstamp = ns_to_ktime(ns);
15248 skb_tstamp_tx(bp->ptp_tx_skb, &shhwtstamps);
15250 DP(BNX2X_MSG_PTP, "Tx timestamp, timestamp cycles = %llu, ns = %llu\n",
15254 "Tx timestamp is not recorded (register read=%u)\n",
15256 bp->eth_stats.ptp_skip_tx_ts++;
15259 dev_kfree_skb_any(bp->ptp_tx_skb);
15260 bp->ptp_tx_skb = NULL;
15263 void bnx2x_set_rx_ts(struct bnx2x *bp, struct sk_buff *skb)
15265 int port = BP_PORT(bp);
15268 timestamp = REG_RD(bp, port ? NIG_REG_P1_LLH_PTP_HOST_BUF_TS_MSB :
15269 NIG_REG_P0_LLH_PTP_HOST_BUF_TS_MSB);
15271 timestamp |= REG_RD(bp, port ? NIG_REG_P1_LLH_PTP_HOST_BUF_TS_LSB :
15272 NIG_REG_P0_LLH_PTP_HOST_BUF_TS_LSB);
15274 /* Reset timestamp register to allow new timestamp */
15275 REG_WR(bp, port ? NIG_REG_P1_LLH_PTP_HOST_BUF_SEQID :
15276 NIG_REG_P0_LLH_PTP_HOST_BUF_SEQID, 0x10000);
15278 ns = timecounter_cyc2time(&bp->timecounter, timestamp);
15280 skb_hwtstamps(skb)->hwtstamp = ns_to_ktime(ns);
15282 DP(BNX2X_MSG_PTP, "Rx timestamp, timestamp cycles = %llu, ns = %llu\n",
15287 static u64 bnx2x_cyclecounter_read(const struct cyclecounter *cc)
15289 struct bnx2x *bp = container_of(cc, struct bnx2x, cyclecounter);
15290 int port = BP_PORT(bp);
15294 REG_RD_DMAE(bp, port ? NIG_REG_TIMESYNC_GEN_REG + tsgen_synctime_t1 :
15295 NIG_REG_TIMESYNC_GEN_REG + tsgen_synctime_t0, wb_data, 2);
15296 phc_cycles = wb_data[1];
15297 phc_cycles = (phc_cycles << 32) + wb_data[0];
15299 DP(BNX2X_MSG_PTP, "PHC read cycles = %llu\n", phc_cycles);
15304 static void bnx2x_init_cyclecounter(struct bnx2x *bp)
15306 memset(&bp->cyclecounter, 0, sizeof(bp->cyclecounter));
15307 bp->cyclecounter.read = bnx2x_cyclecounter_read;
15308 bp->cyclecounter.mask = CYCLECOUNTER_MASK(64);
15309 bp->cyclecounter.shift = 0;
15310 bp->cyclecounter.mult = 1;
15313 static int bnx2x_send_reset_timesync_ramrod(struct bnx2x *bp)
15315 struct bnx2x_func_state_params func_params = {NULL};
15316 struct bnx2x_func_set_timesync_params *set_timesync_params =
15317 &func_params.params.set_timesync;
15319 /* Prepare parameters for function state transitions */
15320 __set_bit(RAMROD_COMP_WAIT, &func_params.ramrod_flags);
15321 __set_bit(RAMROD_RETRY, &func_params.ramrod_flags);
15323 func_params.f_obj = &bp->func_obj;
15324 func_params.cmd = BNX2X_F_CMD_SET_TIMESYNC;
15326 /* Function parameters */
15327 set_timesync_params->drift_adjust_cmd = TS_DRIFT_ADJUST_RESET;
15328 set_timesync_params->offset_cmd = TS_OFFSET_KEEP;
15330 return bnx2x_func_state_change(bp, &func_params);
15333 static int bnx2x_enable_ptp_packets(struct bnx2x *bp)
15335 struct bnx2x_queue_state_params q_params;
15338 /* send queue update ramrod to enable PTP packets */
15339 memset(&q_params, 0, sizeof(q_params));
15340 __set_bit(RAMROD_COMP_WAIT, &q_params.ramrod_flags);
15341 q_params.cmd = BNX2X_Q_CMD_UPDATE;
15342 __set_bit(BNX2X_Q_UPDATE_PTP_PKTS_CHNG,
15343 &q_params.params.update.update_flags);
15344 __set_bit(BNX2X_Q_UPDATE_PTP_PKTS,
15345 &q_params.params.update.update_flags);
15347 /* send the ramrod on all the queues of the PF */
15348 for_each_eth_queue(bp, i) {
15349 struct bnx2x_fastpath *fp = &bp->fp[i];
15351 /* Set the appropriate Queue object */
15352 q_params.q_obj = &bnx2x_sp_obj(bp, fp).q_obj;
15354 /* Update the Queue state */
15355 rc = bnx2x_queue_state_change(bp, &q_params);
15357 BNX2X_ERR("Failed to enable PTP packets\n");
15365 #define BNX2X_P2P_DETECT_PARAM_MASK 0x5F5
15366 #define BNX2X_P2P_DETECT_RULE_MASK 0x3DBB
15367 #define BNX2X_PTP_TX_ON_PARAM_MASK (BNX2X_P2P_DETECT_PARAM_MASK & 0x6AA)
15368 #define BNX2X_PTP_TX_ON_RULE_MASK (BNX2X_P2P_DETECT_RULE_MASK & 0x3EEE)
15369 #define BNX2X_PTP_V1_L4_PARAM_MASK (BNX2X_P2P_DETECT_PARAM_MASK & 0x7EE)
15370 #define BNX2X_PTP_V1_L4_RULE_MASK (BNX2X_P2P_DETECT_RULE_MASK & 0x3FFE)
15371 #define BNX2X_PTP_V2_L4_PARAM_MASK (BNX2X_P2P_DETECT_PARAM_MASK & 0x7EA)
15372 #define BNX2X_PTP_V2_L4_RULE_MASK (BNX2X_P2P_DETECT_RULE_MASK & 0x3FEE)
15373 #define BNX2X_PTP_V2_L2_PARAM_MASK (BNX2X_P2P_DETECT_PARAM_MASK & 0x6BF)
15374 #define BNX2X_PTP_V2_L2_RULE_MASK (BNX2X_P2P_DETECT_RULE_MASK & 0x3EFF)
15375 #define BNX2X_PTP_V2_PARAM_MASK (BNX2X_P2P_DETECT_PARAM_MASK & 0x6AA)
15376 #define BNX2X_PTP_V2_RULE_MASK (BNX2X_P2P_DETECT_RULE_MASK & 0x3EEE)
15378 int bnx2x_configure_ptp_filters(struct bnx2x *bp)
15380 int port = BP_PORT(bp);
15384 if (!bp->hwtstamp_ioctl_called)
15387 param = port ? NIG_REG_P1_TLLH_PTP_PARAM_MASK :
15388 NIG_REG_P0_TLLH_PTP_PARAM_MASK;
15389 rule = port ? NIG_REG_P1_TLLH_PTP_RULE_MASK :
15390 NIG_REG_P0_TLLH_PTP_RULE_MASK;
15391 switch (bp->tx_type) {
15392 case HWTSTAMP_TX_ON:
15393 bp->flags |= TX_TIMESTAMPING_EN;
15394 REG_WR(bp, param, BNX2X_PTP_TX_ON_PARAM_MASK);
15395 REG_WR(bp, rule, BNX2X_PTP_TX_ON_RULE_MASK);
15397 case HWTSTAMP_TX_ONESTEP_SYNC:
15398 BNX2X_ERR("One-step timestamping is not supported\n");
15402 param = port ? NIG_REG_P1_LLH_PTP_PARAM_MASK :
15403 NIG_REG_P0_LLH_PTP_PARAM_MASK;
15404 rule = port ? NIG_REG_P1_LLH_PTP_RULE_MASK :
15405 NIG_REG_P0_LLH_PTP_RULE_MASK;
15406 switch (bp->rx_filter) {
15407 case HWTSTAMP_FILTER_NONE:
15409 case HWTSTAMP_FILTER_ALL:
15410 case HWTSTAMP_FILTER_SOME:
15411 case HWTSTAMP_FILTER_NTP_ALL:
15412 bp->rx_filter = HWTSTAMP_FILTER_NONE;
15414 case HWTSTAMP_FILTER_PTP_V1_L4_EVENT:
15415 case HWTSTAMP_FILTER_PTP_V1_L4_SYNC:
15416 case HWTSTAMP_FILTER_PTP_V1_L4_DELAY_REQ:
15417 bp->rx_filter = HWTSTAMP_FILTER_PTP_V1_L4_EVENT;
15418 /* Initialize PTP detection for UDP/IPv4 events */
15419 REG_WR(bp, param, BNX2X_PTP_V1_L4_PARAM_MASK);
15420 REG_WR(bp, rule, BNX2X_PTP_V1_L4_RULE_MASK);
15422 case HWTSTAMP_FILTER_PTP_V2_L4_EVENT:
15423 case HWTSTAMP_FILTER_PTP_V2_L4_SYNC:
15424 case HWTSTAMP_FILTER_PTP_V2_L4_DELAY_REQ:
15425 bp->rx_filter = HWTSTAMP_FILTER_PTP_V2_L4_EVENT;
15426 /* Initialize PTP detection for UDP/IPv4 or UDP/IPv6 events */
15427 REG_WR(bp, param, BNX2X_PTP_V2_L4_PARAM_MASK);
15428 REG_WR(bp, rule, BNX2X_PTP_V2_L4_RULE_MASK);
15430 case HWTSTAMP_FILTER_PTP_V2_L2_EVENT:
15431 case HWTSTAMP_FILTER_PTP_V2_L2_SYNC:
15432 case HWTSTAMP_FILTER_PTP_V2_L2_DELAY_REQ:
15433 bp->rx_filter = HWTSTAMP_FILTER_PTP_V2_L2_EVENT;
15434 /* Initialize PTP detection L2 events */
15435 REG_WR(bp, param, BNX2X_PTP_V2_L2_PARAM_MASK);
15436 REG_WR(bp, rule, BNX2X_PTP_V2_L2_RULE_MASK);
15439 case HWTSTAMP_FILTER_PTP_V2_EVENT:
15440 case HWTSTAMP_FILTER_PTP_V2_SYNC:
15441 case HWTSTAMP_FILTER_PTP_V2_DELAY_REQ:
15442 bp->rx_filter = HWTSTAMP_FILTER_PTP_V2_EVENT;
15443 /* Initialize PTP detection L2, UDP/IPv4 or UDP/IPv6 events */
15444 REG_WR(bp, param, BNX2X_PTP_V2_PARAM_MASK);
15445 REG_WR(bp, rule, BNX2X_PTP_V2_RULE_MASK);
15449 /* Indicate to FW that this PF expects recorded PTP packets */
15450 rc = bnx2x_enable_ptp_packets(bp);
15454 /* Enable sending PTP packets to host */
15455 REG_WR(bp, port ? NIG_REG_P1_LLH_PTP_TO_HOST :
15456 NIG_REG_P0_LLH_PTP_TO_HOST, 0x1);
15461 static int bnx2x_hwtstamp_ioctl(struct bnx2x *bp, struct ifreq *ifr)
15463 struct hwtstamp_config config;
15466 DP(BNX2X_MSG_PTP, "HWTSTAMP IOCTL called\n");
15468 if (copy_from_user(&config, ifr->ifr_data, sizeof(config)))
15471 DP(BNX2X_MSG_PTP, "Requested tx_type: %d, requested rx_filters = %d\n",
15472 config.tx_type, config.rx_filter);
15474 if (config.flags) {
15475 BNX2X_ERR("config.flags is reserved for future use\n");
15479 bp->hwtstamp_ioctl_called = 1;
15480 bp->tx_type = config.tx_type;
15481 bp->rx_filter = config.rx_filter;
15483 rc = bnx2x_configure_ptp_filters(bp);
15487 config.rx_filter = bp->rx_filter;
15489 return copy_to_user(ifr->ifr_data, &config, sizeof(config)) ?
15493 /* Configures HW for PTP */
15494 static int bnx2x_configure_ptp(struct bnx2x *bp)
15496 int rc, port = BP_PORT(bp);
15499 /* Reset PTP event detection rules - will be configured in the IOCTL */
15500 REG_WR(bp, port ? NIG_REG_P1_LLH_PTP_PARAM_MASK :
15501 NIG_REG_P0_LLH_PTP_PARAM_MASK, 0x7FF);
15502 REG_WR(bp, port ? NIG_REG_P1_LLH_PTP_RULE_MASK :
15503 NIG_REG_P0_LLH_PTP_RULE_MASK, 0x3FFF);
15504 REG_WR(bp, port ? NIG_REG_P1_TLLH_PTP_PARAM_MASK :
15505 NIG_REG_P0_TLLH_PTP_PARAM_MASK, 0x7FF);
15506 REG_WR(bp, port ? NIG_REG_P1_TLLH_PTP_RULE_MASK :
15507 NIG_REG_P0_TLLH_PTP_RULE_MASK, 0x3FFF);
15509 /* Disable PTP packets to host - will be configured in the IOCTL*/
15510 REG_WR(bp, port ? NIG_REG_P1_LLH_PTP_TO_HOST :
15511 NIG_REG_P0_LLH_PTP_TO_HOST, 0x0);
15513 /* Enable the PTP feature */
15514 REG_WR(bp, port ? NIG_REG_P1_PTP_EN :
15515 NIG_REG_P0_PTP_EN, 0x3F);
15517 /* Enable the free-running counter */
15520 REG_WR_DMAE(bp, NIG_REG_TIMESYNC_GEN_REG + tsgen_ctrl, wb_data, 2);
15522 /* Reset drift register (offset register is not reset) */
15523 rc = bnx2x_send_reset_timesync_ramrod(bp);
15525 BNX2X_ERR("Failed to reset PHC drift register\n");
15529 /* Reset possibly old timestamps */
15530 REG_WR(bp, port ? NIG_REG_P1_LLH_PTP_HOST_BUF_SEQID :
15531 NIG_REG_P0_LLH_PTP_HOST_BUF_SEQID, 0x10000);
15532 REG_WR(bp, port ? NIG_REG_P1_TLLH_PTP_BUF_SEQID :
15533 NIG_REG_P0_TLLH_PTP_BUF_SEQID, 0x10000);
15538 /* Called during load, to initialize PTP-related stuff */
15539 void bnx2x_init_ptp(struct bnx2x *bp)
15543 /* Configure PTP in HW */
15544 rc = bnx2x_configure_ptp(bp);
15546 BNX2X_ERR("Stopping PTP initialization\n");
15550 /* Init work queue for Tx timestamping */
15551 INIT_WORK(&bp->ptp_task, bnx2x_ptp_task);
15553 /* Init cyclecounter and timecounter. This is done only in the first
15554 * load. If done in every load, PTP application will fail when doing
15555 * unload / load (e.g. MTU change) while it is running.
15557 if (!bp->timecounter_init_done) {
15558 bnx2x_init_cyclecounter(bp);
15559 timecounter_init(&bp->timecounter, &bp->cyclecounter,
15560 ktime_to_ns(ktime_get_real()));
15561 bp->timecounter_init_done = 1;
15564 DP(BNX2X_MSG_PTP, "PTP initialization ended successfully\n");