1 # SPDX-License-Identifier: GPL-2.0-only
3 # Broadcom device configuration
6 config NET_VENDOR_BROADCOM
7 bool "Broadcom devices"
9 depends on (SSB_POSSIBLE && HAS_DMA) || PCI || BCM63XX || \
12 If you have a network (Ethernet) chipset belonging to this class,
15 Note that the answer to this question does not directly affect
16 the kernel: saying N will just cause the configurator to skip all
17 the questions regarding Broadcom chipsets. If you say Y, you will
18 be asked for your specific chipset/driver in the following questions.
20 if NET_VENDOR_BROADCOM
23 tristate "Broadcom 440x/47xx ethernet support"
24 depends on SSB_POSSIBLE && HAS_DMA
29 If you have a network (Ethernet) controller of this type, say Y
32 To compile this driver as a module, choose M here. The module
35 # Auto-select SSB PCI-HOST support, if possible
36 config B44_PCI_AUTOSELECT
38 depends on B44 && SSB_PCIHOST_POSSIBLE
42 # Auto-select SSB PCICORE driver, if possible
43 config B44_PCICORE_AUTOSELECT
45 depends on B44 && SSB_DRIVER_PCICORE_POSSIBLE
46 select SSB_DRIVER_PCICORE
51 depends on B44_PCI_AUTOSELECT && B44_PCICORE_AUTOSELECT
55 tristate "Broadcom BCM4908 internal mac support"
56 depends on ARCH_BCM4908 || COMPILE_TEST
59 This driver supports Ethernet controller integrated into Broadcom
63 tristate "Broadcom 63xx internal mac support"
68 This driver supports the ethernet MACs in the Broadcom 63xx
69 MIPS chipset family (BCM63XX).
72 tristate "Broadcom GENET internal MAC support"
78 select MDIO_BCM_UNIMAC
80 select BROADCOM_PHY if ARCH_BCM2835
82 This driver supports the built-in Ethernet MACs found in the
83 Broadcom BCM7xxx Set Top Box family chipset.
86 tristate "QLogic bnx2 support"
91 This driver supports QLogic bnx2 gigabit Ethernet cards.
93 To compile this driver as a module, choose M here: the module
94 will be called bnx2. This is recommended.
97 tristate "QLogic CNIC support"
98 depends on PCI && (IPV6 || IPV6=n)
103 This driver supports offload features of QLogic bnx2 gigabit
106 To compile this driver as a module, choose M here: the module
107 will be called cnic. This is recommended.
110 tristate "SB1250 Gigabit Ethernet support"
111 depends on SIBYTE_SB1xxx_SOC
114 This driver supports Gigabit Ethernet interfaces based on the
115 Broadcom SiByte family of System-On-a-Chip parts. They include
116 the BCM1120, BCM1125, BCM1125H, BCM1250, BCM1255, BCM1280, BCM1455
119 To compile this driver as a module, choose M here: the module
120 will be called sb1250-mac.
123 tristate "Broadcom Tigon3 support"
128 This driver supports Broadcom Tigon3 based gigabit Ethernet cards.
130 To compile this driver as a module, choose M here: the module
131 will be called tg3. This is recommended.
134 bool "Broadcom Tigon3 HWMON support"
136 depends on TIGON3 && HWMON && !(TIGON3=y && HWMON=m)
138 Say Y if you want to expose the thermal sensor on Tigon3 devices.
141 tristate "Broadcom NetXtremeII 10Gb support"
149 This driver supports Broadcom NetXtremeII 10 gigabit Ethernet cards.
150 To compile this driver as a module, choose M here: the module
151 will be called bnx2x. This is recommended.
154 bool "Broadcom 578xx and 57712 SR-IOV support"
155 depends on BNX2X && PCI_IOV
158 This configuration parameter enables Single Root Input Output
159 Virtualization support in the 578xx and 57712 products. This
160 allows for virtual function acceleration in virtual environments.
165 This enables the integrated ethernet controller support for many
166 Broadcom (mostly iProc) SoCs. An appropriate bus interface driver
167 needs to be enabled to select this.
170 tristate "Broadcom iProc GBit BCMA support"
171 depends on BCMA && BCMA_HOST_SOC
172 depends on BCM47XX || ARCH_BCM_5301X || COMPILE_TEST
177 This driver supports GBit MAC and BCM4706 GBit MAC cores on BCMA bus.
178 They can be found on BCM47xx SoCs and provide gigabit ethernet.
179 In case of using this driver on BCM4706 it's also requires to enable
180 BCMA_DRIVER_GMAC_CMN to make it work.
182 config BGMAC_PLATFORM
183 tristate "Broadcom iProc GBit platform support"
184 depends on ARCH_BCM_IPROC || COMPILE_TEST
188 default ARCH_BCM_IPROC
190 Say Y here if you want to use the Broadcom iProc Gigabit Ethernet
191 controller through the generic platform interface
194 tristate "Broadcom SYSTEMPORT internal MAC support"
196 depends on NET_DSA || !NET_DSA
202 This driver supports the built-in Ethernet MACs found in the
203 Broadcom BCM7xxx Set Top Box family chipset using an internal
207 tristate "Broadcom NetXtreme-C/E support"
215 This driver supports Broadcom NetXtreme-C/E 10/25/40/50 gigabit
216 Ethernet cards. To compile this driver as a module, choose M here:
217 the module will be called bnxt_en. This is recommended.
220 bool "Broadcom NetXtreme-C/E SR-IOV support"
221 depends on BNXT && PCI_IOV
224 This configuration parameter enables Single Root Input Output
225 Virtualization support in the NetXtreme-C/E products. This
226 allows for virtual function acceleration in virtual environments.
228 config BNXT_FLOWER_OFFLOAD
229 bool "TC Flower offload support for NetXtreme-C/E"
233 This configuration parameter enables TC Flower packet classifier
234 offload for eswitch. This option enables SR-IOV switchdev eswitch
238 bool "Data Center Bridging (DCB) Support"
240 depends on BNXT && DCB
242 Say Y here if you want to use Data Center Bridging (DCB) in the
248 bool "Broadcom NetXtreme-C/E HWMON support"
250 depends on BNXT && HWMON && !(BNXT=y && HWMON=m)
252 Say Y if you want to expose the thermal sensor data on NetXtreme-C/E
253 devices, via the hwmon sysfs interface.
255 endif # NET_VENDOR_BROADCOM