1 /*******************************************************************************
3 Intel PRO/1000 Linux driver
4 Copyright(c) 1999 - 2009 Intel Corporation.
6 This program is free software; you can redistribute it and/or modify it
7 under the terms and conditions of the GNU General Public License,
8 version 2, as published by the Free Software Foundation.
10 This program is distributed in the hope it will be useful, but WITHOUT
11 ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
12 FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
15 You should have received a copy of the GNU General Public License along with
16 this program; if not, write to the Free Software Foundation, Inc.,
17 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
19 The full GNU General Public License is included in this distribution in
20 the file called "COPYING".
23 Linux NICS <linux.nics@intel.com>
24 e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
25 Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
27 *******************************************************************************/
29 #include <linux/module.h>
30 #include <linux/types.h>
31 #include <linux/init.h>
32 #include <linux/pci.h>
33 #include <linux/vmalloc.h>
34 #include <linux/pagemap.h>
35 #include <linux/delay.h>
36 #include <linux/netdevice.h>
37 #include <linux/tcp.h>
38 #include <linux/ipv6.h>
39 #include <net/checksum.h>
40 #include <net/ip6_checksum.h>
41 #include <linux/mii.h>
42 #include <linux/ethtool.h>
43 #include <linux/if_vlan.h>
44 #include <linux/cpu.h>
45 #include <linux/smp.h>
46 #include <linux/pm_qos_params.h>
47 #include <linux/aer.h>
51 #define DRV_VERSION "1.0.2-k2"
52 char e1000e_driver_name[] = "e1000e";
53 const char e1000e_driver_version[] = DRV_VERSION;
55 static const struct e1000_info *e1000_info_tbl[] = {
56 [board_82571] = &e1000_82571_info,
57 [board_82572] = &e1000_82572_info,
58 [board_82573] = &e1000_82573_info,
59 [board_82574] = &e1000_82574_info,
60 [board_82583] = &e1000_82583_info,
61 [board_80003es2lan] = &e1000_es2_info,
62 [board_ich8lan] = &e1000_ich8_info,
63 [board_ich9lan] = &e1000_ich9_info,
64 [board_ich10lan] = &e1000_ich10_info,
65 [board_pchlan] = &e1000_pch_info,
69 * e1000_desc_unused - calculate if we have unused descriptors
71 static int e1000_desc_unused(struct e1000_ring *ring)
73 if (ring->next_to_clean > ring->next_to_use)
74 return ring->next_to_clean - ring->next_to_use - 1;
76 return ring->count + ring->next_to_clean - ring->next_to_use - 1;
80 * e1000_receive_skb - helper function to handle Rx indications
81 * @adapter: board private structure
82 * @status: descriptor status field as written by hardware
83 * @vlan: descriptor vlan field as written by hardware (no le/be conversion)
84 * @skb: pointer to sk_buff to be indicated to stack
86 static void e1000_receive_skb(struct e1000_adapter *adapter,
87 struct net_device *netdev,
89 u8 status, __le16 vlan)
91 skb->protocol = eth_type_trans(skb, netdev);
93 if (adapter->vlgrp && (status & E1000_RXD_STAT_VP))
94 vlan_gro_receive(&adapter->napi, adapter->vlgrp,
95 le16_to_cpu(vlan), skb);
97 napi_gro_receive(&adapter->napi, skb);
101 * e1000_rx_checksum - Receive Checksum Offload for 82543
102 * @adapter: board private structure
103 * @status_err: receive descriptor status and error fields
104 * @csum: receive descriptor csum field
105 * @sk_buff: socket buffer with received data
107 static void e1000_rx_checksum(struct e1000_adapter *adapter, u32 status_err,
108 u32 csum, struct sk_buff *skb)
110 u16 status = (u16)status_err;
111 u8 errors = (u8)(status_err >> 24);
112 skb->ip_summed = CHECKSUM_NONE;
114 /* Ignore Checksum bit is set */
115 if (status & E1000_RXD_STAT_IXSM)
117 /* TCP/UDP checksum error bit is set */
118 if (errors & E1000_RXD_ERR_TCPE) {
119 /* let the stack verify checksum errors */
120 adapter->hw_csum_err++;
124 /* TCP/UDP Checksum has not been calculated */
125 if (!(status & (E1000_RXD_STAT_TCPCS | E1000_RXD_STAT_UDPCS)))
128 /* It must be a TCP or UDP packet with a valid checksum */
129 if (status & E1000_RXD_STAT_TCPCS) {
130 /* TCP checksum is good */
131 skb->ip_summed = CHECKSUM_UNNECESSARY;
134 * IP fragment with UDP payload
135 * Hardware complements the payload checksum, so we undo it
136 * and then put the value in host order for further stack use.
138 __sum16 sum = (__force __sum16)htons(csum);
139 skb->csum = csum_unfold(~sum);
140 skb->ip_summed = CHECKSUM_COMPLETE;
142 adapter->hw_csum_good++;
146 * e1000_alloc_rx_buffers - Replace used receive buffers; legacy & extended
147 * @adapter: address of board private structure
149 static void e1000_alloc_rx_buffers(struct e1000_adapter *adapter,
152 struct net_device *netdev = adapter->netdev;
153 struct pci_dev *pdev = adapter->pdev;
154 struct e1000_ring *rx_ring = adapter->rx_ring;
155 struct e1000_rx_desc *rx_desc;
156 struct e1000_buffer *buffer_info;
159 unsigned int bufsz = adapter->rx_buffer_len;
161 i = rx_ring->next_to_use;
162 buffer_info = &rx_ring->buffer_info[i];
164 while (cleaned_count--) {
165 skb = buffer_info->skb;
171 skb = netdev_alloc_skb_ip_align(netdev, bufsz);
173 /* Better luck next round */
174 adapter->alloc_rx_buff_failed++;
178 buffer_info->skb = skb;
180 buffer_info->dma = pci_map_single(pdev, skb->data,
181 adapter->rx_buffer_len,
183 if (pci_dma_mapping_error(pdev, buffer_info->dma)) {
184 dev_err(&pdev->dev, "RX DMA map failed\n");
185 adapter->rx_dma_failed++;
189 rx_desc = E1000_RX_DESC(*rx_ring, i);
190 rx_desc->buffer_addr = cpu_to_le64(buffer_info->dma);
193 if (i == rx_ring->count)
195 buffer_info = &rx_ring->buffer_info[i];
198 if (rx_ring->next_to_use != i) {
199 rx_ring->next_to_use = i;
201 i = (rx_ring->count - 1);
204 * Force memory writes to complete before letting h/w
205 * know there are new descriptors to fetch. (Only
206 * applicable for weak-ordered memory model archs,
210 writel(i, adapter->hw.hw_addr + rx_ring->tail);
215 * e1000_alloc_rx_buffers_ps - Replace used receive buffers; packet split
216 * @adapter: address of board private structure
218 static void e1000_alloc_rx_buffers_ps(struct e1000_adapter *adapter,
221 struct net_device *netdev = adapter->netdev;
222 struct pci_dev *pdev = adapter->pdev;
223 union e1000_rx_desc_packet_split *rx_desc;
224 struct e1000_ring *rx_ring = adapter->rx_ring;
225 struct e1000_buffer *buffer_info;
226 struct e1000_ps_page *ps_page;
230 i = rx_ring->next_to_use;
231 buffer_info = &rx_ring->buffer_info[i];
233 while (cleaned_count--) {
234 rx_desc = E1000_RX_DESC_PS(*rx_ring, i);
236 for (j = 0; j < PS_PAGE_BUFFERS; j++) {
237 ps_page = &buffer_info->ps_pages[j];
238 if (j >= adapter->rx_ps_pages) {
239 /* all unused desc entries get hw null ptr */
240 rx_desc->read.buffer_addr[j+1] = ~cpu_to_le64(0);
243 if (!ps_page->page) {
244 ps_page->page = alloc_page(GFP_ATOMIC);
245 if (!ps_page->page) {
246 adapter->alloc_rx_buff_failed++;
249 ps_page->dma = pci_map_page(pdev,
253 if (pci_dma_mapping_error(pdev, ps_page->dma)) {
254 dev_err(&adapter->pdev->dev,
255 "RX DMA page map failed\n");
256 adapter->rx_dma_failed++;
261 * Refresh the desc even if buffer_addrs
262 * didn't change because each write-back
265 rx_desc->read.buffer_addr[j+1] =
266 cpu_to_le64(ps_page->dma);
269 skb = netdev_alloc_skb_ip_align(netdev,
270 adapter->rx_ps_bsize0);
273 adapter->alloc_rx_buff_failed++;
277 buffer_info->skb = skb;
278 buffer_info->dma = pci_map_single(pdev, skb->data,
279 adapter->rx_ps_bsize0,
281 if (pci_dma_mapping_error(pdev, buffer_info->dma)) {
282 dev_err(&pdev->dev, "RX DMA map failed\n");
283 adapter->rx_dma_failed++;
285 dev_kfree_skb_any(skb);
286 buffer_info->skb = NULL;
290 rx_desc->read.buffer_addr[0] = cpu_to_le64(buffer_info->dma);
293 if (i == rx_ring->count)
295 buffer_info = &rx_ring->buffer_info[i];
299 if (rx_ring->next_to_use != i) {
300 rx_ring->next_to_use = i;
303 i = (rx_ring->count - 1);
306 * Force memory writes to complete before letting h/w
307 * know there are new descriptors to fetch. (Only
308 * applicable for weak-ordered memory model archs,
313 * Hardware increments by 16 bytes, but packet split
314 * descriptors are 32 bytes...so we increment tail
317 writel(i<<1, adapter->hw.hw_addr + rx_ring->tail);
322 * e1000_alloc_jumbo_rx_buffers - Replace used jumbo receive buffers
323 * @adapter: address of board private structure
324 * @cleaned_count: number of buffers to allocate this pass
327 static void e1000_alloc_jumbo_rx_buffers(struct e1000_adapter *adapter,
330 struct net_device *netdev = adapter->netdev;
331 struct pci_dev *pdev = adapter->pdev;
332 struct e1000_rx_desc *rx_desc;
333 struct e1000_ring *rx_ring = adapter->rx_ring;
334 struct e1000_buffer *buffer_info;
337 unsigned int bufsz = 256 - 16 /* for skb_reserve */;
339 i = rx_ring->next_to_use;
340 buffer_info = &rx_ring->buffer_info[i];
342 while (cleaned_count--) {
343 skb = buffer_info->skb;
349 skb = netdev_alloc_skb_ip_align(netdev, bufsz);
350 if (unlikely(!skb)) {
351 /* Better luck next round */
352 adapter->alloc_rx_buff_failed++;
356 buffer_info->skb = skb;
358 /* allocate a new page if necessary */
359 if (!buffer_info->page) {
360 buffer_info->page = alloc_page(GFP_ATOMIC);
361 if (unlikely(!buffer_info->page)) {
362 adapter->alloc_rx_buff_failed++;
367 if (!buffer_info->dma)
368 buffer_info->dma = pci_map_page(pdev,
369 buffer_info->page, 0,
373 rx_desc = E1000_RX_DESC(*rx_ring, i);
374 rx_desc->buffer_addr = cpu_to_le64(buffer_info->dma);
376 if (unlikely(++i == rx_ring->count))
378 buffer_info = &rx_ring->buffer_info[i];
381 if (likely(rx_ring->next_to_use != i)) {
382 rx_ring->next_to_use = i;
383 if (unlikely(i-- == 0))
384 i = (rx_ring->count - 1);
386 /* Force memory writes to complete before letting h/w
387 * know there are new descriptors to fetch. (Only
388 * applicable for weak-ordered memory model archs,
391 writel(i, adapter->hw.hw_addr + rx_ring->tail);
396 * e1000_clean_rx_irq - Send received data up the network stack; legacy
397 * @adapter: board private structure
399 * the return value indicates whether actual cleaning was done, there
400 * is no guarantee that everything was cleaned
402 static bool e1000_clean_rx_irq(struct e1000_adapter *adapter,
403 int *work_done, int work_to_do)
405 struct net_device *netdev = adapter->netdev;
406 struct pci_dev *pdev = adapter->pdev;
407 struct e1000_hw *hw = &adapter->hw;
408 struct e1000_ring *rx_ring = adapter->rx_ring;
409 struct e1000_rx_desc *rx_desc, *next_rxd;
410 struct e1000_buffer *buffer_info, *next_buffer;
413 int cleaned_count = 0;
415 unsigned int total_rx_bytes = 0, total_rx_packets = 0;
417 i = rx_ring->next_to_clean;
418 rx_desc = E1000_RX_DESC(*rx_ring, i);
419 buffer_info = &rx_ring->buffer_info[i];
421 while (rx_desc->status & E1000_RXD_STAT_DD) {
425 if (*work_done >= work_to_do)
429 status = rx_desc->status;
430 skb = buffer_info->skb;
431 buffer_info->skb = NULL;
433 prefetch(skb->data - NET_IP_ALIGN);
436 if (i == rx_ring->count)
438 next_rxd = E1000_RX_DESC(*rx_ring, i);
441 next_buffer = &rx_ring->buffer_info[i];
445 pci_unmap_single(pdev,
447 adapter->rx_buffer_len,
449 buffer_info->dma = 0;
451 length = le16_to_cpu(rx_desc->length);
454 * !EOP means multiple descriptors were used to store a single
455 * packet, if that's the case we need to toss it. In fact, we
456 * need to toss every packet with the EOP bit clear and the
457 * next frame that _does_ have the EOP bit set, as it is by
458 * definition only a frame fragment
460 if (unlikely(!(status & E1000_RXD_STAT_EOP)))
461 adapter->flags2 |= FLAG2_IS_DISCARDING;
463 if (adapter->flags2 & FLAG2_IS_DISCARDING) {
464 /* All receives must fit into a single buffer */
465 e_dbg("Receive packet consumed multiple buffers\n");
467 buffer_info->skb = skb;
468 if (status & E1000_RXD_STAT_EOP)
469 adapter->flags2 &= ~FLAG2_IS_DISCARDING;
473 if (rx_desc->errors & E1000_RXD_ERR_FRAME_ERR_MASK) {
475 buffer_info->skb = skb;
479 /* adjust length to remove Ethernet CRC */
480 if (!(adapter->flags2 & FLAG2_CRC_STRIPPING))
483 total_rx_bytes += length;
487 * code added for copybreak, this should improve
488 * performance for small packets with large amounts
489 * of reassembly being done in the stack
491 if (length < copybreak) {
492 struct sk_buff *new_skb =
493 netdev_alloc_skb_ip_align(netdev, length);
495 skb_copy_to_linear_data_offset(new_skb,
501 /* save the skb in buffer_info as good */
502 buffer_info->skb = skb;
505 /* else just continue with the old one */
507 /* end copybreak code */
508 skb_put(skb, length);
510 /* Receive Checksum Offload */
511 e1000_rx_checksum(adapter,
513 ((u32)(rx_desc->errors) << 24),
514 le16_to_cpu(rx_desc->csum), skb);
516 e1000_receive_skb(adapter, netdev, skb,status,rx_desc->special);
521 /* return some buffers to hardware, one at a time is too slow */
522 if (cleaned_count >= E1000_RX_BUFFER_WRITE) {
523 adapter->alloc_rx_buf(adapter, cleaned_count);
527 /* use prefetched values */
529 buffer_info = next_buffer;
531 rx_ring->next_to_clean = i;
533 cleaned_count = e1000_desc_unused(rx_ring);
535 adapter->alloc_rx_buf(adapter, cleaned_count);
537 adapter->total_rx_bytes += total_rx_bytes;
538 adapter->total_rx_packets += total_rx_packets;
539 netdev->stats.rx_bytes += total_rx_bytes;
540 netdev->stats.rx_packets += total_rx_packets;
544 static void e1000_put_txbuf(struct e1000_adapter *adapter,
545 struct e1000_buffer *buffer_info)
547 if (buffer_info->dma) {
548 if (buffer_info->mapped_as_page)
549 pci_unmap_page(adapter->pdev, buffer_info->dma,
550 buffer_info->length, PCI_DMA_TODEVICE);
552 pci_unmap_single(adapter->pdev, buffer_info->dma,
555 buffer_info->dma = 0;
557 if (buffer_info->skb) {
558 dev_kfree_skb_any(buffer_info->skb);
559 buffer_info->skb = NULL;
561 buffer_info->time_stamp = 0;
564 static void e1000_print_hw_hang(struct work_struct *work)
566 struct e1000_adapter *adapter = container_of(work,
567 struct e1000_adapter,
569 struct e1000_ring *tx_ring = adapter->tx_ring;
570 unsigned int i = tx_ring->next_to_clean;
571 unsigned int eop = tx_ring->buffer_info[i].next_to_watch;
572 struct e1000_tx_desc *eop_desc = E1000_TX_DESC(*tx_ring, eop);
573 struct e1000_hw *hw = &adapter->hw;
574 u16 phy_status, phy_1000t_status, phy_ext_status;
577 e1e_rphy(hw, PHY_STATUS, &phy_status);
578 e1e_rphy(hw, PHY_1000T_STATUS, &phy_1000t_status);
579 e1e_rphy(hw, PHY_EXT_STATUS, &phy_ext_status);
581 pci_read_config_word(adapter->pdev, PCI_STATUS, &pci_status);
583 /* detected Hardware unit hang */
584 e_err("Detected Hardware Unit Hang:\n"
587 " next_to_use <%x>\n"
588 " next_to_clean <%x>\n"
589 "buffer_info[next_to_clean]:\n"
590 " time_stamp <%lx>\n"
591 " next_to_watch <%x>\n"
593 " next_to_watch.status <%x>\n"
596 "PHY 1000BASE-T Status <%x>\n"
597 "PHY Extended Status <%x>\n"
599 readl(adapter->hw.hw_addr + tx_ring->head),
600 readl(adapter->hw.hw_addr + tx_ring->tail),
601 tx_ring->next_to_use,
602 tx_ring->next_to_clean,
603 tx_ring->buffer_info[eop].time_stamp,
606 eop_desc->upper.fields.status,
615 * e1000_clean_tx_irq - Reclaim resources after transmit completes
616 * @adapter: board private structure
618 * the return value indicates whether actual cleaning was done, there
619 * is no guarantee that everything was cleaned
621 static bool e1000_clean_tx_irq(struct e1000_adapter *adapter)
623 struct net_device *netdev = adapter->netdev;
624 struct e1000_hw *hw = &adapter->hw;
625 struct e1000_ring *tx_ring = adapter->tx_ring;
626 struct e1000_tx_desc *tx_desc, *eop_desc;
627 struct e1000_buffer *buffer_info;
629 unsigned int count = 0;
630 unsigned int total_tx_bytes = 0, total_tx_packets = 0;
632 i = tx_ring->next_to_clean;
633 eop = tx_ring->buffer_info[i].next_to_watch;
634 eop_desc = E1000_TX_DESC(*tx_ring, eop);
636 while ((eop_desc->upper.data & cpu_to_le32(E1000_TXD_STAT_DD)) &&
637 (count < tx_ring->count)) {
638 bool cleaned = false;
639 for (; !cleaned; count++) {
640 tx_desc = E1000_TX_DESC(*tx_ring, i);
641 buffer_info = &tx_ring->buffer_info[i];
642 cleaned = (i == eop);
645 struct sk_buff *skb = buffer_info->skb;
646 unsigned int segs, bytecount;
647 segs = skb_shinfo(skb)->gso_segs ?: 1;
648 /* multiply data chunks by size of headers */
649 bytecount = ((segs - 1) * skb_headlen(skb)) +
651 total_tx_packets += segs;
652 total_tx_bytes += bytecount;
655 e1000_put_txbuf(adapter, buffer_info);
656 tx_desc->upper.data = 0;
659 if (i == tx_ring->count)
663 eop = tx_ring->buffer_info[i].next_to_watch;
664 eop_desc = E1000_TX_DESC(*tx_ring, eop);
667 tx_ring->next_to_clean = i;
669 #define TX_WAKE_THRESHOLD 32
670 if (count && netif_carrier_ok(netdev) &&
671 e1000_desc_unused(tx_ring) >= TX_WAKE_THRESHOLD) {
672 /* Make sure that anybody stopping the queue after this
673 * sees the new next_to_clean.
677 if (netif_queue_stopped(netdev) &&
678 !(test_bit(__E1000_DOWN, &adapter->state))) {
679 netif_wake_queue(netdev);
680 ++adapter->restart_queue;
684 if (adapter->detect_tx_hung) {
686 * Detect a transmit hang in hardware, this serializes the
687 * check with the clearing of time_stamp and movement of i
689 adapter->detect_tx_hung = 0;
690 if (tx_ring->buffer_info[i].time_stamp &&
691 time_after(jiffies, tx_ring->buffer_info[i].time_stamp
692 + (adapter->tx_timeout_factor * HZ)) &&
693 !(er32(STATUS) & E1000_STATUS_TXOFF)) {
694 schedule_work(&adapter->print_hang_task);
695 netif_stop_queue(netdev);
698 adapter->total_tx_bytes += total_tx_bytes;
699 adapter->total_tx_packets += total_tx_packets;
700 netdev->stats.tx_bytes += total_tx_bytes;
701 netdev->stats.tx_packets += total_tx_packets;
702 return (count < tx_ring->count);
706 * e1000_clean_rx_irq_ps - Send received data up the network stack; packet split
707 * @adapter: board private structure
709 * the return value indicates whether actual cleaning was done, there
710 * is no guarantee that everything was cleaned
712 static bool e1000_clean_rx_irq_ps(struct e1000_adapter *adapter,
713 int *work_done, int work_to_do)
715 struct e1000_hw *hw = &adapter->hw;
716 union e1000_rx_desc_packet_split *rx_desc, *next_rxd;
717 struct net_device *netdev = adapter->netdev;
718 struct pci_dev *pdev = adapter->pdev;
719 struct e1000_ring *rx_ring = adapter->rx_ring;
720 struct e1000_buffer *buffer_info, *next_buffer;
721 struct e1000_ps_page *ps_page;
725 int cleaned_count = 0;
727 unsigned int total_rx_bytes = 0, total_rx_packets = 0;
729 i = rx_ring->next_to_clean;
730 rx_desc = E1000_RX_DESC_PS(*rx_ring, i);
731 staterr = le32_to_cpu(rx_desc->wb.middle.status_error);
732 buffer_info = &rx_ring->buffer_info[i];
734 while (staterr & E1000_RXD_STAT_DD) {
735 if (*work_done >= work_to_do)
738 skb = buffer_info->skb;
740 /* in the packet split case this is header only */
741 prefetch(skb->data - NET_IP_ALIGN);
744 if (i == rx_ring->count)
746 next_rxd = E1000_RX_DESC_PS(*rx_ring, i);
749 next_buffer = &rx_ring->buffer_info[i];
753 pci_unmap_single(pdev, buffer_info->dma,
754 adapter->rx_ps_bsize0,
756 buffer_info->dma = 0;
758 /* see !EOP comment in other rx routine */
759 if (!(staterr & E1000_RXD_STAT_EOP))
760 adapter->flags2 |= FLAG2_IS_DISCARDING;
762 if (adapter->flags2 & FLAG2_IS_DISCARDING) {
763 e_dbg("Packet Split buffers didn't pick up the full "
765 dev_kfree_skb_irq(skb);
766 if (staterr & E1000_RXD_STAT_EOP)
767 adapter->flags2 &= ~FLAG2_IS_DISCARDING;
771 if (staterr & E1000_RXDEXT_ERR_FRAME_ERR_MASK) {
772 dev_kfree_skb_irq(skb);
776 length = le16_to_cpu(rx_desc->wb.middle.length0);
779 e_dbg("Last part of the packet spanning multiple "
781 dev_kfree_skb_irq(skb);
786 skb_put(skb, length);
790 * this looks ugly, but it seems compiler issues make it
791 * more efficient than reusing j
793 int l1 = le16_to_cpu(rx_desc->wb.upper.length[0]);
796 * page alloc/put takes too long and effects small packet
797 * throughput, so unsplit small packets and save the alloc/put
798 * only valid in softirq (napi) context to call kmap_*
800 if (l1 && (l1 <= copybreak) &&
801 ((length + l1) <= adapter->rx_ps_bsize0)) {
804 ps_page = &buffer_info->ps_pages[0];
807 * there is no documentation about how to call
808 * kmap_atomic, so we can't hold the mapping
811 pci_dma_sync_single_for_cpu(pdev, ps_page->dma,
812 PAGE_SIZE, PCI_DMA_FROMDEVICE);
813 vaddr = kmap_atomic(ps_page->page, KM_SKB_DATA_SOFTIRQ);
814 memcpy(skb_tail_pointer(skb), vaddr, l1);
815 kunmap_atomic(vaddr, KM_SKB_DATA_SOFTIRQ);
816 pci_dma_sync_single_for_device(pdev, ps_page->dma,
817 PAGE_SIZE, PCI_DMA_FROMDEVICE);
820 if (!(adapter->flags2 & FLAG2_CRC_STRIPPING))
828 for (j = 0; j < PS_PAGE_BUFFERS; j++) {
829 length = le16_to_cpu(rx_desc->wb.upper.length[j]);
833 ps_page = &buffer_info->ps_pages[j];
834 pci_unmap_page(pdev, ps_page->dma, PAGE_SIZE,
837 skb_fill_page_desc(skb, j, ps_page->page, 0, length);
838 ps_page->page = NULL;
840 skb->data_len += length;
841 skb->truesize += length;
844 /* strip the ethernet crc, problem is we're using pages now so
845 * this whole operation can get a little cpu intensive
847 if (!(adapter->flags2 & FLAG2_CRC_STRIPPING))
848 pskb_trim(skb, skb->len - 4);
851 total_rx_bytes += skb->len;
854 e1000_rx_checksum(adapter, staterr, le16_to_cpu(
855 rx_desc->wb.lower.hi_dword.csum_ip.csum), skb);
857 if (rx_desc->wb.upper.header_status &
858 cpu_to_le16(E1000_RXDPS_HDRSTAT_HDRSP))
859 adapter->rx_hdr_split++;
861 e1000_receive_skb(adapter, netdev, skb,
862 staterr, rx_desc->wb.middle.vlan);
865 rx_desc->wb.middle.status_error &= cpu_to_le32(~0xFF);
866 buffer_info->skb = NULL;
868 /* return some buffers to hardware, one at a time is too slow */
869 if (cleaned_count >= E1000_RX_BUFFER_WRITE) {
870 adapter->alloc_rx_buf(adapter, cleaned_count);
874 /* use prefetched values */
876 buffer_info = next_buffer;
878 staterr = le32_to_cpu(rx_desc->wb.middle.status_error);
880 rx_ring->next_to_clean = i;
882 cleaned_count = e1000_desc_unused(rx_ring);
884 adapter->alloc_rx_buf(adapter, cleaned_count);
886 adapter->total_rx_bytes += total_rx_bytes;
887 adapter->total_rx_packets += total_rx_packets;
888 netdev->stats.rx_bytes += total_rx_bytes;
889 netdev->stats.rx_packets += total_rx_packets;
894 * e1000_consume_page - helper function
896 static void e1000_consume_page(struct e1000_buffer *bi, struct sk_buff *skb,
901 skb->data_len += length;
902 skb->truesize += length;
906 * e1000_clean_jumbo_rx_irq - Send received data up the network stack; legacy
907 * @adapter: board private structure
909 * the return value indicates whether actual cleaning was done, there
910 * is no guarantee that everything was cleaned
913 static bool e1000_clean_jumbo_rx_irq(struct e1000_adapter *adapter,
914 int *work_done, int work_to_do)
916 struct net_device *netdev = adapter->netdev;
917 struct pci_dev *pdev = adapter->pdev;
918 struct e1000_ring *rx_ring = adapter->rx_ring;
919 struct e1000_rx_desc *rx_desc, *next_rxd;
920 struct e1000_buffer *buffer_info, *next_buffer;
923 int cleaned_count = 0;
924 bool cleaned = false;
925 unsigned int total_rx_bytes=0, total_rx_packets=0;
927 i = rx_ring->next_to_clean;
928 rx_desc = E1000_RX_DESC(*rx_ring, i);
929 buffer_info = &rx_ring->buffer_info[i];
931 while (rx_desc->status & E1000_RXD_STAT_DD) {
935 if (*work_done >= work_to_do)
939 status = rx_desc->status;
940 skb = buffer_info->skb;
941 buffer_info->skb = NULL;
944 if (i == rx_ring->count)
946 next_rxd = E1000_RX_DESC(*rx_ring, i);
949 next_buffer = &rx_ring->buffer_info[i];
953 pci_unmap_page(pdev, buffer_info->dma, PAGE_SIZE,
955 buffer_info->dma = 0;
957 length = le16_to_cpu(rx_desc->length);
959 /* errors is only valid for DD + EOP descriptors */
960 if (unlikely((status & E1000_RXD_STAT_EOP) &&
961 (rx_desc->errors & E1000_RXD_ERR_FRAME_ERR_MASK))) {
962 /* recycle both page and skb */
963 buffer_info->skb = skb;
964 /* an error means any chain goes out the window
966 if (rx_ring->rx_skb_top)
967 dev_kfree_skb(rx_ring->rx_skb_top);
968 rx_ring->rx_skb_top = NULL;
972 #define rxtop rx_ring->rx_skb_top
973 if (!(status & E1000_RXD_STAT_EOP)) {
974 /* this descriptor is only the beginning (or middle) */
976 /* this is the beginning of a chain */
978 skb_fill_page_desc(rxtop, 0, buffer_info->page,
981 /* this is the middle of a chain */
982 skb_fill_page_desc(rxtop,
983 skb_shinfo(rxtop)->nr_frags,
984 buffer_info->page, 0, length);
985 /* re-use the skb, only consumed the page */
986 buffer_info->skb = skb;
988 e1000_consume_page(buffer_info, rxtop, length);
992 /* end of the chain */
993 skb_fill_page_desc(rxtop,
994 skb_shinfo(rxtop)->nr_frags,
995 buffer_info->page, 0, length);
996 /* re-use the current skb, we only consumed the
998 buffer_info->skb = skb;
1001 e1000_consume_page(buffer_info, skb, length);
1003 /* no chain, got EOP, this buf is the packet
1004 * copybreak to save the put_page/alloc_page */
1005 if (length <= copybreak &&
1006 skb_tailroom(skb) >= length) {
1008 vaddr = kmap_atomic(buffer_info->page,
1009 KM_SKB_DATA_SOFTIRQ);
1010 memcpy(skb_tail_pointer(skb), vaddr,
1012 kunmap_atomic(vaddr,
1013 KM_SKB_DATA_SOFTIRQ);
1014 /* re-use the page, so don't erase
1015 * buffer_info->page */
1016 skb_put(skb, length);
1018 skb_fill_page_desc(skb, 0,
1019 buffer_info->page, 0,
1021 e1000_consume_page(buffer_info, skb,
1027 /* Receive Checksum Offload XXX recompute due to CRC strip? */
1028 e1000_rx_checksum(adapter,
1030 ((u32)(rx_desc->errors) << 24),
1031 le16_to_cpu(rx_desc->csum), skb);
1033 /* probably a little skewed due to removing CRC */
1034 total_rx_bytes += skb->len;
1037 /* eth type trans needs skb->data to point to something */
1038 if (!pskb_may_pull(skb, ETH_HLEN)) {
1039 e_err("pskb_may_pull failed.\n");
1044 e1000_receive_skb(adapter, netdev, skb, status,
1048 rx_desc->status = 0;
1050 /* return some buffers to hardware, one at a time is too slow */
1051 if (unlikely(cleaned_count >= E1000_RX_BUFFER_WRITE)) {
1052 adapter->alloc_rx_buf(adapter, cleaned_count);
1056 /* use prefetched values */
1058 buffer_info = next_buffer;
1060 rx_ring->next_to_clean = i;
1062 cleaned_count = e1000_desc_unused(rx_ring);
1064 adapter->alloc_rx_buf(adapter, cleaned_count);
1066 adapter->total_rx_bytes += total_rx_bytes;
1067 adapter->total_rx_packets += total_rx_packets;
1068 netdev->stats.rx_bytes += total_rx_bytes;
1069 netdev->stats.rx_packets += total_rx_packets;
1074 * e1000_clean_rx_ring - Free Rx Buffers per Queue
1075 * @adapter: board private structure
1077 static void e1000_clean_rx_ring(struct e1000_adapter *adapter)
1079 struct e1000_ring *rx_ring = adapter->rx_ring;
1080 struct e1000_buffer *buffer_info;
1081 struct e1000_ps_page *ps_page;
1082 struct pci_dev *pdev = adapter->pdev;
1085 /* Free all the Rx ring sk_buffs */
1086 for (i = 0; i < rx_ring->count; i++) {
1087 buffer_info = &rx_ring->buffer_info[i];
1088 if (buffer_info->dma) {
1089 if (adapter->clean_rx == e1000_clean_rx_irq)
1090 pci_unmap_single(pdev, buffer_info->dma,
1091 adapter->rx_buffer_len,
1092 PCI_DMA_FROMDEVICE);
1093 else if (adapter->clean_rx == e1000_clean_jumbo_rx_irq)
1094 pci_unmap_page(pdev, buffer_info->dma,
1096 PCI_DMA_FROMDEVICE);
1097 else if (adapter->clean_rx == e1000_clean_rx_irq_ps)
1098 pci_unmap_single(pdev, buffer_info->dma,
1099 adapter->rx_ps_bsize0,
1100 PCI_DMA_FROMDEVICE);
1101 buffer_info->dma = 0;
1104 if (buffer_info->page) {
1105 put_page(buffer_info->page);
1106 buffer_info->page = NULL;
1109 if (buffer_info->skb) {
1110 dev_kfree_skb(buffer_info->skb);
1111 buffer_info->skb = NULL;
1114 for (j = 0; j < PS_PAGE_BUFFERS; j++) {
1115 ps_page = &buffer_info->ps_pages[j];
1118 pci_unmap_page(pdev, ps_page->dma, PAGE_SIZE,
1119 PCI_DMA_FROMDEVICE);
1121 put_page(ps_page->page);
1122 ps_page->page = NULL;
1126 /* there also may be some cached data from a chained receive */
1127 if (rx_ring->rx_skb_top) {
1128 dev_kfree_skb(rx_ring->rx_skb_top);
1129 rx_ring->rx_skb_top = NULL;
1132 /* Zero out the descriptor ring */
1133 memset(rx_ring->desc, 0, rx_ring->size);
1135 rx_ring->next_to_clean = 0;
1136 rx_ring->next_to_use = 0;
1137 adapter->flags2 &= ~FLAG2_IS_DISCARDING;
1139 writel(0, adapter->hw.hw_addr + rx_ring->head);
1140 writel(0, adapter->hw.hw_addr + rx_ring->tail);
1143 static void e1000e_downshift_workaround(struct work_struct *work)
1145 struct e1000_adapter *adapter = container_of(work,
1146 struct e1000_adapter, downshift_task);
1148 e1000e_gig_downshift_workaround_ich8lan(&adapter->hw);
1152 * e1000_intr_msi - Interrupt Handler
1153 * @irq: interrupt number
1154 * @data: pointer to a network interface device structure
1156 static irqreturn_t e1000_intr_msi(int irq, void *data)
1158 struct net_device *netdev = data;
1159 struct e1000_adapter *adapter = netdev_priv(netdev);
1160 struct e1000_hw *hw = &adapter->hw;
1161 u32 icr = er32(ICR);
1164 * read ICR disables interrupts using IAM
1167 if (icr & E1000_ICR_LSC) {
1168 hw->mac.get_link_status = 1;
1170 * ICH8 workaround-- Call gig speed drop workaround on cable
1171 * disconnect (LSC) before accessing any PHY registers
1173 if ((adapter->flags & FLAG_LSC_GIG_SPEED_DROP) &&
1174 (!(er32(STATUS) & E1000_STATUS_LU)))
1175 schedule_work(&adapter->downshift_task);
1178 * 80003ES2LAN workaround-- For packet buffer work-around on
1179 * link down event; disable receives here in the ISR and reset
1180 * adapter in watchdog
1182 if (netif_carrier_ok(netdev) &&
1183 adapter->flags & FLAG_RX_NEEDS_RESTART) {
1184 /* disable receives */
1185 u32 rctl = er32(RCTL);
1186 ew32(RCTL, rctl & ~E1000_RCTL_EN);
1187 adapter->flags |= FLAG_RX_RESTART_NOW;
1189 /* guard against interrupt when we're going down */
1190 if (!test_bit(__E1000_DOWN, &adapter->state))
1191 mod_timer(&adapter->watchdog_timer, jiffies + 1);
1194 if (napi_schedule_prep(&adapter->napi)) {
1195 adapter->total_tx_bytes = 0;
1196 adapter->total_tx_packets = 0;
1197 adapter->total_rx_bytes = 0;
1198 adapter->total_rx_packets = 0;
1199 __napi_schedule(&adapter->napi);
1206 * e1000_intr - Interrupt Handler
1207 * @irq: interrupt number
1208 * @data: pointer to a network interface device structure
1210 static irqreturn_t e1000_intr(int irq, void *data)
1212 struct net_device *netdev = data;
1213 struct e1000_adapter *adapter = netdev_priv(netdev);
1214 struct e1000_hw *hw = &adapter->hw;
1215 u32 rctl, icr = er32(ICR);
1217 if (!icr || test_bit(__E1000_DOWN, &adapter->state))
1218 return IRQ_NONE; /* Not our interrupt */
1221 * IMS will not auto-mask if INT_ASSERTED is not set, and if it is
1222 * not set, then the adapter didn't send an interrupt
1224 if (!(icr & E1000_ICR_INT_ASSERTED))
1228 * Interrupt Auto-Mask...upon reading ICR,
1229 * interrupts are masked. No need for the
1233 if (icr & E1000_ICR_LSC) {
1234 hw->mac.get_link_status = 1;
1236 * ICH8 workaround-- Call gig speed drop workaround on cable
1237 * disconnect (LSC) before accessing any PHY registers
1239 if ((adapter->flags & FLAG_LSC_GIG_SPEED_DROP) &&
1240 (!(er32(STATUS) & E1000_STATUS_LU)))
1241 schedule_work(&adapter->downshift_task);
1244 * 80003ES2LAN workaround--
1245 * For packet buffer work-around on link down event;
1246 * disable receives here in the ISR and
1247 * reset adapter in watchdog
1249 if (netif_carrier_ok(netdev) &&
1250 (adapter->flags & FLAG_RX_NEEDS_RESTART)) {
1251 /* disable receives */
1253 ew32(RCTL, rctl & ~E1000_RCTL_EN);
1254 adapter->flags |= FLAG_RX_RESTART_NOW;
1256 /* guard against interrupt when we're going down */
1257 if (!test_bit(__E1000_DOWN, &adapter->state))
1258 mod_timer(&adapter->watchdog_timer, jiffies + 1);
1261 if (napi_schedule_prep(&adapter->napi)) {
1262 adapter->total_tx_bytes = 0;
1263 adapter->total_tx_packets = 0;
1264 adapter->total_rx_bytes = 0;
1265 adapter->total_rx_packets = 0;
1266 __napi_schedule(&adapter->napi);
1272 static irqreturn_t e1000_msix_other(int irq, void *data)
1274 struct net_device *netdev = data;
1275 struct e1000_adapter *adapter = netdev_priv(netdev);
1276 struct e1000_hw *hw = &adapter->hw;
1277 u32 icr = er32(ICR);
1279 if (!(icr & E1000_ICR_INT_ASSERTED)) {
1280 if (!test_bit(__E1000_DOWN, &adapter->state))
1281 ew32(IMS, E1000_IMS_OTHER);
1285 if (icr & adapter->eiac_mask)
1286 ew32(ICS, (icr & adapter->eiac_mask));
1288 if (icr & E1000_ICR_OTHER) {
1289 if (!(icr & E1000_ICR_LSC))
1290 goto no_link_interrupt;
1291 hw->mac.get_link_status = 1;
1292 /* guard against interrupt when we're going down */
1293 if (!test_bit(__E1000_DOWN, &adapter->state))
1294 mod_timer(&adapter->watchdog_timer, jiffies + 1);
1298 if (!test_bit(__E1000_DOWN, &adapter->state))
1299 ew32(IMS, E1000_IMS_LSC | E1000_IMS_OTHER);
1305 static irqreturn_t e1000_intr_msix_tx(int irq, void *data)
1307 struct net_device *netdev = data;
1308 struct e1000_adapter *adapter = netdev_priv(netdev);
1309 struct e1000_hw *hw = &adapter->hw;
1310 struct e1000_ring *tx_ring = adapter->tx_ring;
1313 adapter->total_tx_bytes = 0;
1314 adapter->total_tx_packets = 0;
1316 if (!e1000_clean_tx_irq(adapter))
1317 /* Ring was not completely cleaned, so fire another interrupt */
1318 ew32(ICS, tx_ring->ims_val);
1323 static irqreturn_t e1000_intr_msix_rx(int irq, void *data)
1325 struct net_device *netdev = data;
1326 struct e1000_adapter *adapter = netdev_priv(netdev);
1328 /* Write the ITR value calculated at the end of the
1329 * previous interrupt.
1331 if (adapter->rx_ring->set_itr) {
1332 writel(1000000000 / (adapter->rx_ring->itr_val * 256),
1333 adapter->hw.hw_addr + adapter->rx_ring->itr_register);
1334 adapter->rx_ring->set_itr = 0;
1337 if (napi_schedule_prep(&adapter->napi)) {
1338 adapter->total_rx_bytes = 0;
1339 adapter->total_rx_packets = 0;
1340 __napi_schedule(&adapter->napi);
1346 * e1000_configure_msix - Configure MSI-X hardware
1348 * e1000_configure_msix sets up the hardware to properly
1349 * generate MSI-X interrupts.
1351 static void e1000_configure_msix(struct e1000_adapter *adapter)
1353 struct e1000_hw *hw = &adapter->hw;
1354 struct e1000_ring *rx_ring = adapter->rx_ring;
1355 struct e1000_ring *tx_ring = adapter->tx_ring;
1357 u32 ctrl_ext, ivar = 0;
1359 adapter->eiac_mask = 0;
1361 /* Workaround issue with spurious interrupts on 82574 in MSI-X mode */
1362 if (hw->mac.type == e1000_82574) {
1363 u32 rfctl = er32(RFCTL);
1364 rfctl |= E1000_RFCTL_ACK_DIS;
1368 #define E1000_IVAR_INT_ALLOC_VALID 0x8
1369 /* Configure Rx vector */
1370 rx_ring->ims_val = E1000_IMS_RXQ0;
1371 adapter->eiac_mask |= rx_ring->ims_val;
1372 if (rx_ring->itr_val)
1373 writel(1000000000 / (rx_ring->itr_val * 256),
1374 hw->hw_addr + rx_ring->itr_register);
1376 writel(1, hw->hw_addr + rx_ring->itr_register);
1377 ivar = E1000_IVAR_INT_ALLOC_VALID | vector;
1379 /* Configure Tx vector */
1380 tx_ring->ims_val = E1000_IMS_TXQ0;
1382 if (tx_ring->itr_val)
1383 writel(1000000000 / (tx_ring->itr_val * 256),
1384 hw->hw_addr + tx_ring->itr_register);
1386 writel(1, hw->hw_addr + tx_ring->itr_register);
1387 adapter->eiac_mask |= tx_ring->ims_val;
1388 ivar |= ((E1000_IVAR_INT_ALLOC_VALID | vector) << 8);
1390 /* set vector for Other Causes, e.g. link changes */
1392 ivar |= ((E1000_IVAR_INT_ALLOC_VALID | vector) << 16);
1393 if (rx_ring->itr_val)
1394 writel(1000000000 / (rx_ring->itr_val * 256),
1395 hw->hw_addr + E1000_EITR_82574(vector));
1397 writel(1, hw->hw_addr + E1000_EITR_82574(vector));
1399 /* Cause Tx interrupts on every write back */
1404 /* enable MSI-X PBA support */
1405 ctrl_ext = er32(CTRL_EXT);
1406 ctrl_ext |= E1000_CTRL_EXT_PBA_CLR;
1408 /* Auto-Mask Other interrupts upon ICR read */
1409 #define E1000_EIAC_MASK_82574 0x01F00000
1410 ew32(IAM, ~E1000_EIAC_MASK_82574 | E1000_IMS_OTHER);
1411 ctrl_ext |= E1000_CTRL_EXT_EIAME;
1412 ew32(CTRL_EXT, ctrl_ext);
1416 void e1000e_reset_interrupt_capability(struct e1000_adapter *adapter)
1418 if (adapter->msix_entries) {
1419 pci_disable_msix(adapter->pdev);
1420 kfree(adapter->msix_entries);
1421 adapter->msix_entries = NULL;
1422 } else if (adapter->flags & FLAG_MSI_ENABLED) {
1423 pci_disable_msi(adapter->pdev);
1424 adapter->flags &= ~FLAG_MSI_ENABLED;
1431 * e1000e_set_interrupt_capability - set MSI or MSI-X if supported
1433 * Attempt to configure interrupts using the best available
1434 * capabilities of the hardware and kernel.
1436 void e1000e_set_interrupt_capability(struct e1000_adapter *adapter)
1442 switch (adapter->int_mode) {
1443 case E1000E_INT_MODE_MSIX:
1444 if (adapter->flags & FLAG_HAS_MSIX) {
1445 numvecs = 3; /* RxQ0, TxQ0 and other */
1446 adapter->msix_entries = kcalloc(numvecs,
1447 sizeof(struct msix_entry),
1449 if (adapter->msix_entries) {
1450 for (i = 0; i < numvecs; i++)
1451 adapter->msix_entries[i].entry = i;
1453 err = pci_enable_msix(adapter->pdev,
1454 adapter->msix_entries,
1459 /* MSI-X failed, so fall through and try MSI */
1460 e_err("Failed to initialize MSI-X interrupts. "
1461 "Falling back to MSI interrupts.\n");
1462 e1000e_reset_interrupt_capability(adapter);
1464 adapter->int_mode = E1000E_INT_MODE_MSI;
1466 case E1000E_INT_MODE_MSI:
1467 if (!pci_enable_msi(adapter->pdev)) {
1468 adapter->flags |= FLAG_MSI_ENABLED;
1470 adapter->int_mode = E1000E_INT_MODE_LEGACY;
1471 e_err("Failed to initialize MSI interrupts. Falling "
1472 "back to legacy interrupts.\n");
1475 case E1000E_INT_MODE_LEGACY:
1476 /* Don't do anything; this is the system default */
1484 * e1000_request_msix - Initialize MSI-X interrupts
1486 * e1000_request_msix allocates MSI-X vectors and requests interrupts from the
1489 static int e1000_request_msix(struct e1000_adapter *adapter)
1491 struct net_device *netdev = adapter->netdev;
1492 int err = 0, vector = 0;
1494 if (strlen(netdev->name) < (IFNAMSIZ - 5))
1495 sprintf(adapter->rx_ring->name, "%s-rx-0", netdev->name);
1497 memcpy(adapter->rx_ring->name, netdev->name, IFNAMSIZ);
1498 err = request_irq(adapter->msix_entries[vector].vector,
1499 e1000_intr_msix_rx, 0, adapter->rx_ring->name,
1503 adapter->rx_ring->itr_register = E1000_EITR_82574(vector);
1504 adapter->rx_ring->itr_val = adapter->itr;
1507 if (strlen(netdev->name) < (IFNAMSIZ - 5))
1508 sprintf(adapter->tx_ring->name, "%s-tx-0", netdev->name);
1510 memcpy(adapter->tx_ring->name, netdev->name, IFNAMSIZ);
1511 err = request_irq(adapter->msix_entries[vector].vector,
1512 e1000_intr_msix_tx, 0, adapter->tx_ring->name,
1516 adapter->tx_ring->itr_register = E1000_EITR_82574(vector);
1517 adapter->tx_ring->itr_val = adapter->itr;
1520 err = request_irq(adapter->msix_entries[vector].vector,
1521 e1000_msix_other, 0, netdev->name, netdev);
1525 e1000_configure_msix(adapter);
1532 * e1000_request_irq - initialize interrupts
1534 * Attempts to configure interrupts using the best available
1535 * capabilities of the hardware and kernel.
1537 static int e1000_request_irq(struct e1000_adapter *adapter)
1539 struct net_device *netdev = adapter->netdev;
1542 if (adapter->msix_entries) {
1543 err = e1000_request_msix(adapter);
1546 /* fall back to MSI */
1547 e1000e_reset_interrupt_capability(adapter);
1548 adapter->int_mode = E1000E_INT_MODE_MSI;
1549 e1000e_set_interrupt_capability(adapter);
1551 if (adapter->flags & FLAG_MSI_ENABLED) {
1552 err = request_irq(adapter->pdev->irq, e1000_intr_msi, 0,
1553 netdev->name, netdev);
1557 /* fall back to legacy interrupt */
1558 e1000e_reset_interrupt_capability(adapter);
1559 adapter->int_mode = E1000E_INT_MODE_LEGACY;
1562 err = request_irq(adapter->pdev->irq, e1000_intr, IRQF_SHARED,
1563 netdev->name, netdev);
1565 e_err("Unable to allocate interrupt, Error: %d\n", err);
1570 static void e1000_free_irq(struct e1000_adapter *adapter)
1572 struct net_device *netdev = adapter->netdev;
1574 if (adapter->msix_entries) {
1577 free_irq(adapter->msix_entries[vector].vector, netdev);
1580 free_irq(adapter->msix_entries[vector].vector, netdev);
1583 /* Other Causes interrupt vector */
1584 free_irq(adapter->msix_entries[vector].vector, netdev);
1588 free_irq(adapter->pdev->irq, netdev);
1592 * e1000_irq_disable - Mask off interrupt generation on the NIC
1594 static void e1000_irq_disable(struct e1000_adapter *adapter)
1596 struct e1000_hw *hw = &adapter->hw;
1599 if (adapter->msix_entries)
1600 ew32(EIAC_82574, 0);
1602 synchronize_irq(adapter->pdev->irq);
1606 * e1000_irq_enable - Enable default interrupt generation settings
1608 static void e1000_irq_enable(struct e1000_adapter *adapter)
1610 struct e1000_hw *hw = &adapter->hw;
1612 if (adapter->msix_entries) {
1613 ew32(EIAC_82574, adapter->eiac_mask & E1000_EIAC_MASK_82574);
1614 ew32(IMS, adapter->eiac_mask | E1000_IMS_OTHER | E1000_IMS_LSC);
1616 ew32(IMS, IMS_ENABLE_MASK);
1622 * e1000_get_hw_control - get control of the h/w from f/w
1623 * @adapter: address of board private structure
1625 * e1000_get_hw_control sets {CTRL_EXT|SWSM}:DRV_LOAD bit.
1626 * For ASF and Pass Through versions of f/w this means that
1627 * the driver is loaded. For AMT version (only with 82573)
1628 * of the f/w this means that the network i/f is open.
1630 static void e1000_get_hw_control(struct e1000_adapter *adapter)
1632 struct e1000_hw *hw = &adapter->hw;
1636 /* Let firmware know the driver has taken over */
1637 if (adapter->flags & FLAG_HAS_SWSM_ON_LOAD) {
1639 ew32(SWSM, swsm | E1000_SWSM_DRV_LOAD);
1640 } else if (adapter->flags & FLAG_HAS_CTRLEXT_ON_LOAD) {
1641 ctrl_ext = er32(CTRL_EXT);
1642 ew32(CTRL_EXT, ctrl_ext | E1000_CTRL_EXT_DRV_LOAD);
1647 * e1000_release_hw_control - release control of the h/w to f/w
1648 * @adapter: address of board private structure
1650 * e1000_release_hw_control resets {CTRL_EXT|SWSM}:DRV_LOAD bit.
1651 * For ASF and Pass Through versions of f/w this means that the
1652 * driver is no longer loaded. For AMT version (only with 82573) i
1653 * of the f/w this means that the network i/f is closed.
1656 static void e1000_release_hw_control(struct e1000_adapter *adapter)
1658 struct e1000_hw *hw = &adapter->hw;
1662 /* Let firmware taken over control of h/w */
1663 if (adapter->flags & FLAG_HAS_SWSM_ON_LOAD) {
1665 ew32(SWSM, swsm & ~E1000_SWSM_DRV_LOAD);
1666 } else if (adapter->flags & FLAG_HAS_CTRLEXT_ON_LOAD) {
1667 ctrl_ext = er32(CTRL_EXT);
1668 ew32(CTRL_EXT, ctrl_ext & ~E1000_CTRL_EXT_DRV_LOAD);
1673 * @e1000_alloc_ring - allocate memory for a ring structure
1675 static int e1000_alloc_ring_dma(struct e1000_adapter *adapter,
1676 struct e1000_ring *ring)
1678 struct pci_dev *pdev = adapter->pdev;
1680 ring->desc = dma_alloc_coherent(&pdev->dev, ring->size, &ring->dma,
1689 * e1000e_setup_tx_resources - allocate Tx resources (Descriptors)
1690 * @adapter: board private structure
1692 * Return 0 on success, negative on failure
1694 int e1000e_setup_tx_resources(struct e1000_adapter *adapter)
1696 struct e1000_ring *tx_ring = adapter->tx_ring;
1697 int err = -ENOMEM, size;
1699 size = sizeof(struct e1000_buffer) * tx_ring->count;
1700 tx_ring->buffer_info = vmalloc(size);
1701 if (!tx_ring->buffer_info)
1703 memset(tx_ring->buffer_info, 0, size);
1705 /* round up to nearest 4K */
1706 tx_ring->size = tx_ring->count * sizeof(struct e1000_tx_desc);
1707 tx_ring->size = ALIGN(tx_ring->size, 4096);
1709 err = e1000_alloc_ring_dma(adapter, tx_ring);
1713 tx_ring->next_to_use = 0;
1714 tx_ring->next_to_clean = 0;
1718 vfree(tx_ring->buffer_info);
1719 e_err("Unable to allocate memory for the transmit descriptor ring\n");
1724 * e1000e_setup_rx_resources - allocate Rx resources (Descriptors)
1725 * @adapter: board private structure
1727 * Returns 0 on success, negative on failure
1729 int e1000e_setup_rx_resources(struct e1000_adapter *adapter)
1731 struct e1000_ring *rx_ring = adapter->rx_ring;
1732 struct e1000_buffer *buffer_info;
1733 int i, size, desc_len, err = -ENOMEM;
1735 size = sizeof(struct e1000_buffer) * rx_ring->count;
1736 rx_ring->buffer_info = vmalloc(size);
1737 if (!rx_ring->buffer_info)
1739 memset(rx_ring->buffer_info, 0, size);
1741 for (i = 0; i < rx_ring->count; i++) {
1742 buffer_info = &rx_ring->buffer_info[i];
1743 buffer_info->ps_pages = kcalloc(PS_PAGE_BUFFERS,
1744 sizeof(struct e1000_ps_page),
1746 if (!buffer_info->ps_pages)
1750 desc_len = sizeof(union e1000_rx_desc_packet_split);
1752 /* Round up to nearest 4K */
1753 rx_ring->size = rx_ring->count * desc_len;
1754 rx_ring->size = ALIGN(rx_ring->size, 4096);
1756 err = e1000_alloc_ring_dma(adapter, rx_ring);
1760 rx_ring->next_to_clean = 0;
1761 rx_ring->next_to_use = 0;
1762 rx_ring->rx_skb_top = NULL;
1767 for (i = 0; i < rx_ring->count; i++) {
1768 buffer_info = &rx_ring->buffer_info[i];
1769 kfree(buffer_info->ps_pages);
1772 vfree(rx_ring->buffer_info);
1773 e_err("Unable to allocate memory for the transmit descriptor ring\n");
1778 * e1000_clean_tx_ring - Free Tx Buffers
1779 * @adapter: board private structure
1781 static void e1000_clean_tx_ring(struct e1000_adapter *adapter)
1783 struct e1000_ring *tx_ring = adapter->tx_ring;
1784 struct e1000_buffer *buffer_info;
1788 for (i = 0; i < tx_ring->count; i++) {
1789 buffer_info = &tx_ring->buffer_info[i];
1790 e1000_put_txbuf(adapter, buffer_info);
1793 size = sizeof(struct e1000_buffer) * tx_ring->count;
1794 memset(tx_ring->buffer_info, 0, size);
1796 memset(tx_ring->desc, 0, tx_ring->size);
1798 tx_ring->next_to_use = 0;
1799 tx_ring->next_to_clean = 0;
1801 writel(0, adapter->hw.hw_addr + tx_ring->head);
1802 writel(0, adapter->hw.hw_addr + tx_ring->tail);
1806 * e1000e_free_tx_resources - Free Tx Resources per Queue
1807 * @adapter: board private structure
1809 * Free all transmit software resources
1811 void e1000e_free_tx_resources(struct e1000_adapter *adapter)
1813 struct pci_dev *pdev = adapter->pdev;
1814 struct e1000_ring *tx_ring = adapter->tx_ring;
1816 e1000_clean_tx_ring(adapter);
1818 vfree(tx_ring->buffer_info);
1819 tx_ring->buffer_info = NULL;
1821 dma_free_coherent(&pdev->dev, tx_ring->size, tx_ring->desc,
1823 tx_ring->desc = NULL;
1827 * e1000e_free_rx_resources - Free Rx Resources
1828 * @adapter: board private structure
1830 * Free all receive software resources
1833 void e1000e_free_rx_resources(struct e1000_adapter *adapter)
1835 struct pci_dev *pdev = adapter->pdev;
1836 struct e1000_ring *rx_ring = adapter->rx_ring;
1839 e1000_clean_rx_ring(adapter);
1841 for (i = 0; i < rx_ring->count; i++) {
1842 kfree(rx_ring->buffer_info[i].ps_pages);
1845 vfree(rx_ring->buffer_info);
1846 rx_ring->buffer_info = NULL;
1848 dma_free_coherent(&pdev->dev, rx_ring->size, rx_ring->desc,
1850 rx_ring->desc = NULL;
1854 * e1000_update_itr - update the dynamic ITR value based on statistics
1855 * @adapter: pointer to adapter
1856 * @itr_setting: current adapter->itr
1857 * @packets: the number of packets during this measurement interval
1858 * @bytes: the number of bytes during this measurement interval
1860 * Stores a new ITR value based on packets and byte
1861 * counts during the last interrupt. The advantage of per interrupt
1862 * computation is faster updates and more accurate ITR for the current
1863 * traffic pattern. Constants in this function were computed
1864 * based on theoretical maximum wire speed and thresholds were set based
1865 * on testing data as well as attempting to minimize response time
1866 * while increasing bulk throughput. This functionality is controlled
1867 * by the InterruptThrottleRate module parameter.
1869 static unsigned int e1000_update_itr(struct e1000_adapter *adapter,
1870 u16 itr_setting, int packets,
1873 unsigned int retval = itr_setting;
1876 goto update_itr_done;
1878 switch (itr_setting) {
1879 case lowest_latency:
1880 /* handle TSO and jumbo frames */
1881 if (bytes/packets > 8000)
1882 retval = bulk_latency;
1883 else if ((packets < 5) && (bytes > 512)) {
1884 retval = low_latency;
1887 case low_latency: /* 50 usec aka 20000 ints/s */
1888 if (bytes > 10000) {
1889 /* this if handles the TSO accounting */
1890 if (bytes/packets > 8000) {
1891 retval = bulk_latency;
1892 } else if ((packets < 10) || ((bytes/packets) > 1200)) {
1893 retval = bulk_latency;
1894 } else if ((packets > 35)) {
1895 retval = lowest_latency;
1897 } else if (bytes/packets > 2000) {
1898 retval = bulk_latency;
1899 } else if (packets <= 2 && bytes < 512) {
1900 retval = lowest_latency;
1903 case bulk_latency: /* 250 usec aka 4000 ints/s */
1904 if (bytes > 25000) {
1906 retval = low_latency;
1908 } else if (bytes < 6000) {
1909 retval = low_latency;
1918 static void e1000_set_itr(struct e1000_adapter *adapter)
1920 struct e1000_hw *hw = &adapter->hw;
1922 u32 new_itr = adapter->itr;
1924 /* for non-gigabit speeds, just fix the interrupt rate at 4000 */
1925 if (adapter->link_speed != SPEED_1000) {
1931 adapter->tx_itr = e1000_update_itr(adapter,
1933 adapter->total_tx_packets,
1934 adapter->total_tx_bytes);
1935 /* conservative mode (itr 3) eliminates the lowest_latency setting */
1936 if (adapter->itr_setting == 3 && adapter->tx_itr == lowest_latency)
1937 adapter->tx_itr = low_latency;
1939 adapter->rx_itr = e1000_update_itr(adapter,
1941 adapter->total_rx_packets,
1942 adapter->total_rx_bytes);
1943 /* conservative mode (itr 3) eliminates the lowest_latency setting */
1944 if (adapter->itr_setting == 3 && adapter->rx_itr == lowest_latency)
1945 adapter->rx_itr = low_latency;
1947 current_itr = max(adapter->rx_itr, adapter->tx_itr);
1949 switch (current_itr) {
1950 /* counts and packets in update_itr are dependent on these numbers */
1951 case lowest_latency:
1955 new_itr = 20000; /* aka hwitr = ~200 */
1965 if (new_itr != adapter->itr) {
1967 * this attempts to bias the interrupt rate towards Bulk
1968 * by adding intermediate steps when interrupt rate is
1971 new_itr = new_itr > adapter->itr ?
1972 min(adapter->itr + (new_itr >> 2), new_itr) :
1974 adapter->itr = new_itr;
1975 adapter->rx_ring->itr_val = new_itr;
1976 if (adapter->msix_entries)
1977 adapter->rx_ring->set_itr = 1;
1979 ew32(ITR, 1000000000 / (new_itr * 256));
1984 * e1000_alloc_queues - Allocate memory for all rings
1985 * @adapter: board private structure to initialize
1987 static int __devinit e1000_alloc_queues(struct e1000_adapter *adapter)
1989 adapter->tx_ring = kzalloc(sizeof(struct e1000_ring), GFP_KERNEL);
1990 if (!adapter->tx_ring)
1993 adapter->rx_ring = kzalloc(sizeof(struct e1000_ring), GFP_KERNEL);
1994 if (!adapter->rx_ring)
1999 e_err("Unable to allocate memory for queues\n");
2000 kfree(adapter->rx_ring);
2001 kfree(adapter->tx_ring);
2006 * e1000_clean - NAPI Rx polling callback
2007 * @napi: struct associated with this polling callback
2008 * @budget: amount of packets driver is allowed to process this poll
2010 static int e1000_clean(struct napi_struct *napi, int budget)
2012 struct e1000_adapter *adapter = container_of(napi, struct e1000_adapter, napi);
2013 struct e1000_hw *hw = &adapter->hw;
2014 struct net_device *poll_dev = adapter->netdev;
2015 int tx_cleaned = 1, work_done = 0;
2017 adapter = netdev_priv(poll_dev);
2019 if (adapter->msix_entries &&
2020 !(adapter->rx_ring->ims_val & adapter->tx_ring->ims_val))
2023 tx_cleaned = e1000_clean_tx_irq(adapter);
2026 adapter->clean_rx(adapter, &work_done, budget);
2031 /* If budget not fully consumed, exit the polling mode */
2032 if (work_done < budget) {
2033 if (adapter->itr_setting & 3)
2034 e1000_set_itr(adapter);
2035 napi_complete(napi);
2036 if (!test_bit(__E1000_DOWN, &adapter->state)) {
2037 if (adapter->msix_entries)
2038 ew32(IMS, adapter->rx_ring->ims_val);
2040 e1000_irq_enable(adapter);
2047 static void e1000_vlan_rx_add_vid(struct net_device *netdev, u16 vid)
2049 struct e1000_adapter *adapter = netdev_priv(netdev);
2050 struct e1000_hw *hw = &adapter->hw;
2053 /* don't update vlan cookie if already programmed */
2054 if ((adapter->hw.mng_cookie.status &
2055 E1000_MNG_DHCP_COOKIE_STATUS_VLAN) &&
2056 (vid == adapter->mng_vlan_id))
2059 /* add VID to filter table */
2060 if (adapter->flags & FLAG_HAS_HW_VLAN_FILTER) {
2061 index = (vid >> 5) & 0x7F;
2062 vfta = E1000_READ_REG_ARRAY(hw, E1000_VFTA, index);
2063 vfta |= (1 << (vid & 0x1F));
2064 hw->mac.ops.write_vfta(hw, index, vfta);
2068 static void e1000_vlan_rx_kill_vid(struct net_device *netdev, u16 vid)
2070 struct e1000_adapter *adapter = netdev_priv(netdev);
2071 struct e1000_hw *hw = &adapter->hw;
2074 if (!test_bit(__E1000_DOWN, &adapter->state))
2075 e1000_irq_disable(adapter);
2076 vlan_group_set_device(adapter->vlgrp, vid, NULL);
2078 if (!test_bit(__E1000_DOWN, &adapter->state))
2079 e1000_irq_enable(adapter);
2081 if ((adapter->hw.mng_cookie.status &
2082 E1000_MNG_DHCP_COOKIE_STATUS_VLAN) &&
2083 (vid == adapter->mng_vlan_id)) {
2084 /* release control to f/w */
2085 e1000_release_hw_control(adapter);
2089 /* remove VID from filter table */
2090 if (adapter->flags & FLAG_HAS_HW_VLAN_FILTER) {
2091 index = (vid >> 5) & 0x7F;
2092 vfta = E1000_READ_REG_ARRAY(hw, E1000_VFTA, index);
2093 vfta &= ~(1 << (vid & 0x1F));
2094 hw->mac.ops.write_vfta(hw, index, vfta);
2098 static void e1000_update_mng_vlan(struct e1000_adapter *adapter)
2100 struct net_device *netdev = adapter->netdev;
2101 u16 vid = adapter->hw.mng_cookie.vlan_id;
2102 u16 old_vid = adapter->mng_vlan_id;
2104 if (!adapter->vlgrp)
2107 if (!vlan_group_get_device(adapter->vlgrp, vid)) {
2108 adapter->mng_vlan_id = E1000_MNG_VLAN_NONE;
2109 if (adapter->hw.mng_cookie.status &
2110 E1000_MNG_DHCP_COOKIE_STATUS_VLAN) {
2111 e1000_vlan_rx_add_vid(netdev, vid);
2112 adapter->mng_vlan_id = vid;
2115 if ((old_vid != (u16)E1000_MNG_VLAN_NONE) &&
2117 !vlan_group_get_device(adapter->vlgrp, old_vid))
2118 e1000_vlan_rx_kill_vid(netdev, old_vid);
2120 adapter->mng_vlan_id = vid;
2125 static void e1000_vlan_rx_register(struct net_device *netdev,
2126 struct vlan_group *grp)
2128 struct e1000_adapter *adapter = netdev_priv(netdev);
2129 struct e1000_hw *hw = &adapter->hw;
2132 if (!test_bit(__E1000_DOWN, &adapter->state))
2133 e1000_irq_disable(adapter);
2134 adapter->vlgrp = grp;
2137 /* enable VLAN tag insert/strip */
2139 ctrl |= E1000_CTRL_VME;
2142 if (adapter->flags & FLAG_HAS_HW_VLAN_FILTER) {
2143 /* enable VLAN receive filtering */
2145 rctl &= ~E1000_RCTL_CFIEN;
2147 e1000_update_mng_vlan(adapter);
2150 /* disable VLAN tag insert/strip */
2152 ctrl &= ~E1000_CTRL_VME;
2155 if (adapter->flags & FLAG_HAS_HW_VLAN_FILTER) {
2156 if (adapter->mng_vlan_id !=
2157 (u16)E1000_MNG_VLAN_NONE) {
2158 e1000_vlan_rx_kill_vid(netdev,
2159 adapter->mng_vlan_id);
2160 adapter->mng_vlan_id = E1000_MNG_VLAN_NONE;
2165 if (!test_bit(__E1000_DOWN, &adapter->state))
2166 e1000_irq_enable(adapter);
2169 static void e1000_restore_vlan(struct e1000_adapter *adapter)
2173 e1000_vlan_rx_register(adapter->netdev, adapter->vlgrp);
2175 if (!adapter->vlgrp)
2178 for (vid = 0; vid < VLAN_GROUP_ARRAY_LEN; vid++) {
2179 if (!vlan_group_get_device(adapter->vlgrp, vid))
2181 e1000_vlan_rx_add_vid(adapter->netdev, vid);
2185 static void e1000_init_manageability(struct e1000_adapter *adapter)
2187 struct e1000_hw *hw = &adapter->hw;
2190 if (!(adapter->flags & FLAG_MNG_PT_ENABLED))
2196 * enable receiving management packets to the host. this will probably
2197 * generate destination unreachable messages from the host OS, but
2198 * the packets will be handled on SMBUS
2200 manc |= E1000_MANC_EN_MNG2HOST;
2201 manc2h = er32(MANC2H);
2202 #define E1000_MNG2HOST_PORT_623 (1 << 5)
2203 #define E1000_MNG2HOST_PORT_664 (1 << 6)
2204 manc2h |= E1000_MNG2HOST_PORT_623;
2205 manc2h |= E1000_MNG2HOST_PORT_664;
2206 ew32(MANC2H, manc2h);
2211 * e1000_configure_tx - Configure 8254x Transmit Unit after Reset
2212 * @adapter: board private structure
2214 * Configure the Tx unit of the MAC after a reset.
2216 static void e1000_configure_tx(struct e1000_adapter *adapter)
2218 struct e1000_hw *hw = &adapter->hw;
2219 struct e1000_ring *tx_ring = adapter->tx_ring;
2221 u32 tdlen, tctl, tipg, tarc;
2224 /* Setup the HW Tx Head and Tail descriptor pointers */
2225 tdba = tx_ring->dma;
2226 tdlen = tx_ring->count * sizeof(struct e1000_tx_desc);
2227 ew32(TDBAL, (tdba & DMA_BIT_MASK(32)));
2228 ew32(TDBAH, (tdba >> 32));
2232 tx_ring->head = E1000_TDH;
2233 tx_ring->tail = E1000_TDT;
2235 /* Set the default values for the Tx Inter Packet Gap timer */
2236 tipg = DEFAULT_82543_TIPG_IPGT_COPPER; /* 8 */
2237 ipgr1 = DEFAULT_82543_TIPG_IPGR1; /* 8 */
2238 ipgr2 = DEFAULT_82543_TIPG_IPGR2; /* 6 */
2240 if (adapter->flags & FLAG_TIPG_MEDIUM_FOR_80003ESLAN)
2241 ipgr2 = DEFAULT_80003ES2LAN_TIPG_IPGR2; /* 7 */
2243 tipg |= ipgr1 << E1000_TIPG_IPGR1_SHIFT;
2244 tipg |= ipgr2 << E1000_TIPG_IPGR2_SHIFT;
2247 /* Set the Tx Interrupt Delay register */
2248 ew32(TIDV, adapter->tx_int_delay);
2249 /* Tx irq moderation */
2250 ew32(TADV, adapter->tx_abs_int_delay);
2252 /* Program the Transmit Control Register */
2254 tctl &= ~E1000_TCTL_CT;
2255 tctl |= E1000_TCTL_PSP | E1000_TCTL_RTLC |
2256 (E1000_COLLISION_THRESHOLD << E1000_CT_SHIFT);
2258 if (adapter->flags & FLAG_TARC_SPEED_MODE_BIT) {
2259 tarc = er32(TARC(0));
2261 * set the speed mode bit, we'll clear it if we're not at
2262 * gigabit link later
2264 #define SPEED_MODE_BIT (1 << 21)
2265 tarc |= SPEED_MODE_BIT;
2266 ew32(TARC(0), tarc);
2269 /* errata: program both queues to unweighted RR */
2270 if (adapter->flags & FLAG_TARC_SET_BIT_ZERO) {
2271 tarc = er32(TARC(0));
2273 ew32(TARC(0), tarc);
2274 tarc = er32(TARC(1));
2276 ew32(TARC(1), tarc);
2279 /* Setup Transmit Descriptor Settings for eop descriptor */
2280 adapter->txd_cmd = E1000_TXD_CMD_EOP | E1000_TXD_CMD_IFCS;
2282 /* only set IDE if we are delaying interrupts using the timers */
2283 if (adapter->tx_int_delay)
2284 adapter->txd_cmd |= E1000_TXD_CMD_IDE;
2286 /* enable Report Status bit */
2287 adapter->txd_cmd |= E1000_TXD_CMD_RS;
2291 e1000e_config_collision_dist(hw);
2293 adapter->tx_queue_len = adapter->netdev->tx_queue_len;
2297 * e1000_setup_rctl - configure the receive control registers
2298 * @adapter: Board private structure
2300 #define PAGE_USE_COUNT(S) (((S) >> PAGE_SHIFT) + \
2301 (((S) & (PAGE_SIZE - 1)) ? 1 : 0))
2302 static void e1000_setup_rctl(struct e1000_adapter *adapter)
2304 struct e1000_hw *hw = &adapter->hw;
2309 /* Program MC offset vector base */
2311 rctl &= ~(3 << E1000_RCTL_MO_SHIFT);
2312 rctl |= E1000_RCTL_EN | E1000_RCTL_BAM |
2313 E1000_RCTL_LBM_NO | E1000_RCTL_RDMTS_HALF |
2314 (adapter->hw.mac.mc_filter_type << E1000_RCTL_MO_SHIFT);
2316 /* Do not Store bad packets */
2317 rctl &= ~E1000_RCTL_SBP;
2319 /* Enable Long Packet receive */
2320 if (adapter->netdev->mtu <= ETH_DATA_LEN)
2321 rctl &= ~E1000_RCTL_LPE;
2323 rctl |= E1000_RCTL_LPE;
2325 /* Some systems expect that the CRC is included in SMBUS traffic. The
2326 * hardware strips the CRC before sending to both SMBUS (BMC) and to
2327 * host memory when this is enabled
2329 if (adapter->flags2 & FLAG2_CRC_STRIPPING)
2330 rctl |= E1000_RCTL_SECRC;
2332 /* Workaround Si errata on 82577 PHY - configure IPG for jumbos */
2333 if ((hw->phy.type == e1000_phy_82577) && (rctl & E1000_RCTL_LPE)) {
2336 e1e_rphy(hw, PHY_REG(770, 26), &phy_data);
2338 phy_data |= (1 << 2);
2339 e1e_wphy(hw, PHY_REG(770, 26), phy_data);
2341 e1e_rphy(hw, 22, &phy_data);
2343 phy_data |= (1 << 14);
2344 e1e_wphy(hw, 0x10, 0x2823);
2345 e1e_wphy(hw, 0x11, 0x0003);
2346 e1e_wphy(hw, 22, phy_data);
2349 /* Setup buffer sizes */
2350 rctl &= ~E1000_RCTL_SZ_4096;
2351 rctl |= E1000_RCTL_BSEX;
2352 switch (adapter->rx_buffer_len) {
2355 rctl |= E1000_RCTL_SZ_2048;
2356 rctl &= ~E1000_RCTL_BSEX;
2359 rctl |= E1000_RCTL_SZ_4096;
2362 rctl |= E1000_RCTL_SZ_8192;
2365 rctl |= E1000_RCTL_SZ_16384;
2370 * 82571 and greater support packet-split where the protocol
2371 * header is placed in skb->data and the packet data is
2372 * placed in pages hanging off of skb_shinfo(skb)->nr_frags.
2373 * In the case of a non-split, skb->data is linearly filled,
2374 * followed by the page buffers. Therefore, skb->data is
2375 * sized to hold the largest protocol header.
2377 * allocations using alloc_page take too long for regular MTU
2378 * so only enable packet split for jumbo frames
2380 * Using pages when the page size is greater than 16k wastes
2381 * a lot of memory, since we allocate 3 pages at all times
2384 pages = PAGE_USE_COUNT(adapter->netdev->mtu);
2385 if (!(adapter->flags & FLAG_IS_ICH) && (pages <= 3) &&
2386 (PAGE_SIZE <= 16384) && (rctl & E1000_RCTL_LPE))
2387 adapter->rx_ps_pages = pages;
2389 adapter->rx_ps_pages = 0;
2391 if (adapter->rx_ps_pages) {
2392 /* Configure extra packet-split registers */
2393 rfctl = er32(RFCTL);
2394 rfctl |= E1000_RFCTL_EXTEN;
2396 * disable packet split support for IPv6 extension headers,
2397 * because some malformed IPv6 headers can hang the Rx
2399 rfctl |= (E1000_RFCTL_IPV6_EX_DIS |
2400 E1000_RFCTL_NEW_IPV6_EXT_DIS);
2404 /* Enable Packet split descriptors */
2405 rctl |= E1000_RCTL_DTYP_PS;
2407 psrctl |= adapter->rx_ps_bsize0 >>
2408 E1000_PSRCTL_BSIZE0_SHIFT;
2410 switch (adapter->rx_ps_pages) {
2412 psrctl |= PAGE_SIZE <<
2413 E1000_PSRCTL_BSIZE3_SHIFT;
2415 psrctl |= PAGE_SIZE <<
2416 E1000_PSRCTL_BSIZE2_SHIFT;
2418 psrctl |= PAGE_SIZE >>
2419 E1000_PSRCTL_BSIZE1_SHIFT;
2423 ew32(PSRCTL, psrctl);
2427 /* just started the receive unit, no need to restart */
2428 adapter->flags &= ~FLAG_RX_RESTART_NOW;
2432 * e1000_configure_rx - Configure Receive Unit after Reset
2433 * @adapter: board private structure
2435 * Configure the Rx unit of the MAC after a reset.
2437 static void e1000_configure_rx(struct e1000_adapter *adapter)
2439 struct e1000_hw *hw = &adapter->hw;
2440 struct e1000_ring *rx_ring = adapter->rx_ring;
2442 u32 rdlen, rctl, rxcsum, ctrl_ext;
2444 if (adapter->rx_ps_pages) {
2445 /* this is a 32 byte descriptor */
2446 rdlen = rx_ring->count *
2447 sizeof(union e1000_rx_desc_packet_split);
2448 adapter->clean_rx = e1000_clean_rx_irq_ps;
2449 adapter->alloc_rx_buf = e1000_alloc_rx_buffers_ps;
2450 } else if (adapter->netdev->mtu > ETH_FRAME_LEN + ETH_FCS_LEN) {
2451 rdlen = rx_ring->count * sizeof(struct e1000_rx_desc);
2452 adapter->clean_rx = e1000_clean_jumbo_rx_irq;
2453 adapter->alloc_rx_buf = e1000_alloc_jumbo_rx_buffers;
2455 rdlen = rx_ring->count * sizeof(struct e1000_rx_desc);
2456 adapter->clean_rx = e1000_clean_rx_irq;
2457 adapter->alloc_rx_buf = e1000_alloc_rx_buffers;
2460 /* disable receives while setting up the descriptors */
2462 ew32(RCTL, rctl & ~E1000_RCTL_EN);
2466 /* set the Receive Delay Timer Register */
2467 ew32(RDTR, adapter->rx_int_delay);
2469 /* irq moderation */
2470 ew32(RADV, adapter->rx_abs_int_delay);
2471 if (adapter->itr_setting != 0)
2472 ew32(ITR, 1000000000 / (adapter->itr * 256));
2474 ctrl_ext = er32(CTRL_EXT);
2475 /* Auto-Mask interrupts upon ICR access */
2476 ctrl_ext |= E1000_CTRL_EXT_IAME;
2477 ew32(IAM, 0xffffffff);
2478 ew32(CTRL_EXT, ctrl_ext);
2482 * Setup the HW Rx Head and Tail Descriptor Pointers and
2483 * the Base and Length of the Rx Descriptor Ring
2485 rdba = rx_ring->dma;
2486 ew32(RDBAL, (rdba & DMA_BIT_MASK(32)));
2487 ew32(RDBAH, (rdba >> 32));
2491 rx_ring->head = E1000_RDH;
2492 rx_ring->tail = E1000_RDT;
2494 /* Enable Receive Checksum Offload for TCP and UDP */
2495 rxcsum = er32(RXCSUM);
2496 if (adapter->flags & FLAG_RX_CSUM_ENABLED) {
2497 rxcsum |= E1000_RXCSUM_TUOFL;
2500 * IPv4 payload checksum for UDP fragments must be
2501 * used in conjunction with packet-split.
2503 if (adapter->rx_ps_pages)
2504 rxcsum |= E1000_RXCSUM_IPPCSE;
2506 rxcsum &= ~E1000_RXCSUM_TUOFL;
2507 /* no need to clear IPPCSE as it defaults to 0 */
2509 ew32(RXCSUM, rxcsum);
2512 * Enable early receives on supported devices, only takes effect when
2513 * packet size is equal or larger than the specified value (in 8 byte
2514 * units), e.g. using jumbo frames when setting to E1000_ERT_2048
2516 if (adapter->flags & FLAG_HAS_ERT) {
2517 if (adapter->netdev->mtu > ETH_DATA_LEN) {
2518 u32 rxdctl = er32(RXDCTL(0));
2519 ew32(RXDCTL(0), rxdctl | 0x3);
2520 ew32(ERT, E1000_ERT_2048 | (1 << 13));
2522 * With jumbo frames and early-receive enabled,
2523 * excessive C-state transition latencies result in
2524 * dropped transactions.
2526 pm_qos_update_requirement(PM_QOS_CPU_DMA_LATENCY,
2527 adapter->netdev->name, 55);
2529 pm_qos_update_requirement(PM_QOS_CPU_DMA_LATENCY,
2530 adapter->netdev->name,
2531 PM_QOS_DEFAULT_VALUE);
2535 /* Enable Receives */
2540 * e1000_update_mc_addr_list - Update Multicast addresses
2541 * @hw: pointer to the HW structure
2542 * @mc_addr_list: array of multicast addresses to program
2543 * @mc_addr_count: number of multicast addresses to program
2545 * Updates the Multicast Table Array.
2546 * The caller must have a packed mc_addr_list of multicast addresses.
2548 static void e1000_update_mc_addr_list(struct e1000_hw *hw, u8 *mc_addr_list,
2551 hw->mac.ops.update_mc_addr_list(hw, mc_addr_list, mc_addr_count);
2555 * e1000_set_multi - Multicast and Promiscuous mode set
2556 * @netdev: network interface device structure
2558 * The set_multi entry point is called whenever the multicast address
2559 * list or the network interface flags are updated. This routine is
2560 * responsible for configuring the hardware for proper multicast,
2561 * promiscuous mode, and all-multi behavior.
2563 static void e1000_set_multi(struct net_device *netdev)
2565 struct e1000_adapter *adapter = netdev_priv(netdev);
2566 struct e1000_hw *hw = &adapter->hw;
2567 struct dev_mc_list *mc_ptr;
2572 /* Check for Promiscuous and All Multicast modes */
2576 if (netdev->flags & IFF_PROMISC) {
2577 rctl |= (E1000_RCTL_UPE | E1000_RCTL_MPE);
2578 rctl &= ~E1000_RCTL_VFE;
2580 if (netdev->flags & IFF_ALLMULTI) {
2581 rctl |= E1000_RCTL_MPE;
2582 rctl &= ~E1000_RCTL_UPE;
2584 rctl &= ~(E1000_RCTL_UPE | E1000_RCTL_MPE);
2586 if (adapter->flags & FLAG_HAS_HW_VLAN_FILTER)
2587 rctl |= E1000_RCTL_VFE;
2592 if (!netdev_mc_empty(netdev)) {
2593 mta_list = kmalloc(netdev_mc_count(netdev) * 6, GFP_ATOMIC);
2597 /* prepare a packed array of only addresses. */
2599 netdev_for_each_mc_addr(mc_ptr, netdev)
2600 memcpy(mta_list + (i++ * ETH_ALEN),
2601 mc_ptr->dmi_addr, ETH_ALEN);
2603 e1000_update_mc_addr_list(hw, mta_list, i);
2607 * if we're called from probe, we might not have
2608 * anything to do here, so clear out the list
2610 e1000_update_mc_addr_list(hw, NULL, 0);
2615 * e1000_configure - configure the hardware for Rx and Tx
2616 * @adapter: private board structure
2618 static void e1000_configure(struct e1000_adapter *adapter)
2620 e1000_set_multi(adapter->netdev);
2622 e1000_restore_vlan(adapter);
2623 e1000_init_manageability(adapter);
2625 e1000_configure_tx(adapter);
2626 e1000_setup_rctl(adapter);
2627 e1000_configure_rx(adapter);
2628 adapter->alloc_rx_buf(adapter, e1000_desc_unused(adapter->rx_ring));
2632 * e1000e_power_up_phy - restore link in case the phy was powered down
2633 * @adapter: address of board private structure
2635 * The phy may be powered down to save power and turn off link when the
2636 * driver is unloaded and wake on lan is not enabled (among others)
2637 * *** this routine MUST be followed by a call to e1000e_reset ***
2639 void e1000e_power_up_phy(struct e1000_adapter *adapter)
2641 if (adapter->hw.phy.ops.power_up)
2642 adapter->hw.phy.ops.power_up(&adapter->hw);
2644 adapter->hw.mac.ops.setup_link(&adapter->hw);
2648 * e1000_power_down_phy - Power down the PHY
2650 * Power down the PHY so no link is implied when interface is down.
2651 * The PHY cannot be powered down if management or WoL is active.
2653 static void e1000_power_down_phy(struct e1000_adapter *adapter)
2655 /* WoL is enabled */
2659 if (adapter->hw.phy.ops.power_down)
2660 adapter->hw.phy.ops.power_down(&adapter->hw);
2664 * e1000e_reset - bring the hardware into a known good state
2666 * This function boots the hardware and enables some settings that
2667 * require a configuration cycle of the hardware - those cannot be
2668 * set/changed during runtime. After reset the device needs to be
2669 * properly configured for Rx, Tx etc.
2671 void e1000e_reset(struct e1000_adapter *adapter)
2673 struct e1000_mac_info *mac = &adapter->hw.mac;
2674 struct e1000_fc_info *fc = &adapter->hw.fc;
2675 struct e1000_hw *hw = &adapter->hw;
2676 u32 tx_space, min_tx_space, min_rx_space;
2677 u32 pba = adapter->pba;
2680 /* reset Packet Buffer Allocation to default */
2683 if (adapter->max_frame_size > ETH_FRAME_LEN + ETH_FCS_LEN) {
2685 * To maintain wire speed transmits, the Tx FIFO should be
2686 * large enough to accommodate two full transmit packets,
2687 * rounded up to the next 1KB and expressed in KB. Likewise,
2688 * the Rx FIFO should be large enough to accommodate at least
2689 * one full receive packet and is similarly rounded up and
2693 /* upper 16 bits has Tx packet buffer allocation size in KB */
2694 tx_space = pba >> 16;
2695 /* lower 16 bits has Rx packet buffer allocation size in KB */
2698 * the Tx fifo also stores 16 bytes of information about the tx
2699 * but don't include ethernet FCS because hardware appends it
2701 min_tx_space = (adapter->max_frame_size +
2702 sizeof(struct e1000_tx_desc) -
2704 min_tx_space = ALIGN(min_tx_space, 1024);
2705 min_tx_space >>= 10;
2706 /* software strips receive CRC, so leave room for it */
2707 min_rx_space = adapter->max_frame_size;
2708 min_rx_space = ALIGN(min_rx_space, 1024);
2709 min_rx_space >>= 10;
2712 * If current Tx allocation is less than the min Tx FIFO size,
2713 * and the min Tx FIFO size is less than the current Rx FIFO
2714 * allocation, take space away from current Rx allocation
2716 if ((tx_space < min_tx_space) &&
2717 ((min_tx_space - tx_space) < pba)) {
2718 pba -= min_tx_space - tx_space;
2721 * if short on Rx space, Rx wins and must trump tx
2722 * adjustment or use Early Receive if available
2724 if ((pba < min_rx_space) &&
2725 (!(adapter->flags & FLAG_HAS_ERT)))
2726 /* ERT enabled in e1000_configure_rx */
2735 * flow control settings
2737 * The high water mark must be low enough to fit one full frame
2738 * (or the size used for early receive) above it in the Rx FIFO.
2739 * Set it to the lower of:
2740 * - 90% of the Rx FIFO size, and
2741 * - the full Rx FIFO size minus the early receive size (for parts
2742 * with ERT support assuming ERT set to E1000_ERT_2048), or
2743 * - the full Rx FIFO size minus one full frame
2745 if (hw->mac.type == e1000_pchlan) {
2747 * Workaround PCH LOM adapter hangs with certain network
2748 * loads. If hangs persist, try disabling Tx flow control.
2750 if (adapter->netdev->mtu > ETH_DATA_LEN) {
2751 fc->high_water = 0x3500;
2752 fc->low_water = 0x1500;
2754 fc->high_water = 0x5000;
2755 fc->low_water = 0x3000;
2758 if ((adapter->flags & FLAG_HAS_ERT) &&
2759 (adapter->netdev->mtu > ETH_DATA_LEN))
2760 hwm = min(((pba << 10) * 9 / 10),
2761 ((pba << 10) - (E1000_ERT_2048 << 3)));
2763 hwm = min(((pba << 10) * 9 / 10),
2764 ((pba << 10) - adapter->max_frame_size));
2766 fc->high_water = hwm & E1000_FCRTH_RTH; /* 8-byte granularity */
2767 fc->low_water = fc->high_water - 8;
2770 if (adapter->flags & FLAG_DISABLE_FC_PAUSE_TIME)
2771 fc->pause_time = 0xFFFF;
2773 fc->pause_time = E1000_FC_PAUSE_TIME;
2775 fc->current_mode = fc->requested_mode;
2777 /* Allow time for pending master requests to run */
2778 mac->ops.reset_hw(hw);
2781 * For parts with AMT enabled, let the firmware know
2782 * that the network interface is in control
2784 if (adapter->flags & FLAG_HAS_AMT)
2785 e1000_get_hw_control(adapter);
2788 if (adapter->flags2 & FLAG2_HAS_PHY_WAKEUP)
2789 e1e_wphy(&adapter->hw, BM_WUC, 0);
2791 if (mac->ops.init_hw(hw))
2792 e_err("Hardware Error\n");
2794 /* additional part of the flow-control workaround above */
2795 if (hw->mac.type == e1000_pchlan)
2796 ew32(FCRTV_PCH, 0x1000);
2798 e1000_update_mng_vlan(adapter);
2800 /* Enable h/w to recognize an 802.1Q VLAN Ethernet packet */
2801 ew32(VET, ETH_P_8021Q);
2803 e1000e_reset_adaptive(hw);
2804 e1000_get_phy_info(hw);
2806 if ((adapter->flags & FLAG_HAS_SMART_POWER_DOWN) &&
2807 !(adapter->flags & FLAG_SMART_POWER_DOWN)) {
2810 * speed up time to link by disabling smart power down, ignore
2811 * the return value of this function because there is nothing
2812 * different we would do if it failed
2814 e1e_rphy(hw, IGP02E1000_PHY_POWER_MGMT, &phy_data);
2815 phy_data &= ~IGP02E1000_PM_SPD;
2816 e1e_wphy(hw, IGP02E1000_PHY_POWER_MGMT, phy_data);
2820 int e1000e_up(struct e1000_adapter *adapter)
2822 struct e1000_hw *hw = &adapter->hw;
2824 /* DMA latency requirement to workaround early-receive/jumbo issue */
2825 if (adapter->flags & FLAG_HAS_ERT)
2826 pm_qos_add_requirement(PM_QOS_CPU_DMA_LATENCY,
2827 adapter->netdev->name,
2828 PM_QOS_DEFAULT_VALUE);
2830 /* hardware has been reset, we need to reload some things */
2831 e1000_configure(adapter);
2833 clear_bit(__E1000_DOWN, &adapter->state);
2835 napi_enable(&adapter->napi);
2836 if (adapter->msix_entries)
2837 e1000_configure_msix(adapter);
2838 e1000_irq_enable(adapter);
2840 netif_wake_queue(adapter->netdev);
2842 /* fire a link change interrupt to start the watchdog */
2843 ew32(ICS, E1000_ICS_LSC);
2847 void e1000e_down(struct e1000_adapter *adapter)
2849 struct net_device *netdev = adapter->netdev;
2850 struct e1000_hw *hw = &adapter->hw;
2854 * signal that we're down so the interrupt handler does not
2855 * reschedule our watchdog timer
2857 set_bit(__E1000_DOWN, &adapter->state);
2859 /* disable receives in the hardware */
2861 ew32(RCTL, rctl & ~E1000_RCTL_EN);
2862 /* flush and sleep below */
2864 netif_stop_queue(netdev);
2866 /* disable transmits in the hardware */
2868 tctl &= ~E1000_TCTL_EN;
2870 /* flush both disables and wait for them to finish */
2874 napi_disable(&adapter->napi);
2875 e1000_irq_disable(adapter);
2877 del_timer_sync(&adapter->watchdog_timer);
2878 del_timer_sync(&adapter->phy_info_timer);
2880 netdev->tx_queue_len = adapter->tx_queue_len;
2881 netif_carrier_off(netdev);
2882 adapter->link_speed = 0;
2883 adapter->link_duplex = 0;
2885 if (!pci_channel_offline(adapter->pdev))
2886 e1000e_reset(adapter);
2887 e1000_clean_tx_ring(adapter);
2888 e1000_clean_rx_ring(adapter);
2890 if (adapter->flags & FLAG_HAS_ERT)
2891 pm_qos_remove_requirement(PM_QOS_CPU_DMA_LATENCY,
2892 adapter->netdev->name);
2895 * TODO: for power management, we could drop the link and
2896 * pci_disable_device here.
2900 void e1000e_reinit_locked(struct e1000_adapter *adapter)
2903 while (test_and_set_bit(__E1000_RESETTING, &adapter->state))
2905 e1000e_down(adapter);
2907 clear_bit(__E1000_RESETTING, &adapter->state);
2911 * e1000_sw_init - Initialize general software structures (struct e1000_adapter)
2912 * @adapter: board private structure to initialize
2914 * e1000_sw_init initializes the Adapter private data structure.
2915 * Fields are initialized based on PCI device information and
2916 * OS network device settings (MTU size).
2918 static int __devinit e1000_sw_init(struct e1000_adapter *adapter)
2920 struct net_device *netdev = adapter->netdev;
2922 adapter->rx_buffer_len = ETH_FRAME_LEN + VLAN_HLEN + ETH_FCS_LEN;
2923 adapter->rx_ps_bsize0 = 128;
2924 adapter->max_frame_size = netdev->mtu + ETH_HLEN + ETH_FCS_LEN;
2925 adapter->min_frame_size = ETH_ZLEN + ETH_FCS_LEN;
2927 e1000e_set_interrupt_capability(adapter);
2929 if (e1000_alloc_queues(adapter))
2932 /* Explicitly disable IRQ since the NIC can be in any state. */
2933 e1000_irq_disable(adapter);
2935 set_bit(__E1000_DOWN, &adapter->state);
2940 * e1000_intr_msi_test - Interrupt Handler
2941 * @irq: interrupt number
2942 * @data: pointer to a network interface device structure
2944 static irqreturn_t e1000_intr_msi_test(int irq, void *data)
2946 struct net_device *netdev = data;
2947 struct e1000_adapter *adapter = netdev_priv(netdev);
2948 struct e1000_hw *hw = &adapter->hw;
2949 u32 icr = er32(ICR);
2951 e_dbg("icr is %08X\n", icr);
2952 if (icr & E1000_ICR_RXSEQ) {
2953 adapter->flags &= ~FLAG_MSI_TEST_FAILED;
2961 * e1000_test_msi_interrupt - Returns 0 for successful test
2962 * @adapter: board private struct
2964 * code flow taken from tg3.c
2966 static int e1000_test_msi_interrupt(struct e1000_adapter *adapter)
2968 struct net_device *netdev = adapter->netdev;
2969 struct e1000_hw *hw = &adapter->hw;
2972 /* poll_enable hasn't been called yet, so don't need disable */
2973 /* clear any pending events */
2976 /* free the real vector and request a test handler */
2977 e1000_free_irq(adapter);
2978 e1000e_reset_interrupt_capability(adapter);
2980 /* Assume that the test fails, if it succeeds then the test
2981 * MSI irq handler will unset this flag */
2982 adapter->flags |= FLAG_MSI_TEST_FAILED;
2984 err = pci_enable_msi(adapter->pdev);
2986 goto msi_test_failed;
2988 err = request_irq(adapter->pdev->irq, e1000_intr_msi_test, 0,
2989 netdev->name, netdev);
2991 pci_disable_msi(adapter->pdev);
2992 goto msi_test_failed;
2997 e1000_irq_enable(adapter);
2999 /* fire an unusual interrupt on the test handler */
3000 ew32(ICS, E1000_ICS_RXSEQ);
3004 e1000_irq_disable(adapter);
3008 if (adapter->flags & FLAG_MSI_TEST_FAILED) {
3009 adapter->int_mode = E1000E_INT_MODE_LEGACY;
3011 e_info("MSI interrupt test failed!\n");
3014 free_irq(adapter->pdev->irq, netdev);
3015 pci_disable_msi(adapter->pdev);
3018 goto msi_test_failed;
3020 /* okay so the test worked, restore settings */
3021 e_dbg("MSI interrupt test succeeded!\n");
3023 e1000e_set_interrupt_capability(adapter);
3024 e1000_request_irq(adapter);
3029 * e1000_test_msi - Returns 0 if MSI test succeeds or INTx mode is restored
3030 * @adapter: board private struct
3032 * code flow taken from tg3.c, called with e1000 interrupts disabled.
3034 static int e1000_test_msi(struct e1000_adapter *adapter)
3039 if (!(adapter->flags & FLAG_MSI_ENABLED))
3042 /* disable SERR in case the MSI write causes a master abort */
3043 pci_read_config_word(adapter->pdev, PCI_COMMAND, &pci_cmd);
3044 pci_write_config_word(adapter->pdev, PCI_COMMAND,
3045 pci_cmd & ~PCI_COMMAND_SERR);
3047 err = e1000_test_msi_interrupt(adapter);
3049 /* restore previous setting of command word */
3050 pci_write_config_word(adapter->pdev, PCI_COMMAND, pci_cmd);
3056 /* EIO means MSI test failed */
3060 /* back to INTx mode */
3061 e_warn("MSI interrupt test failed, using legacy interrupt.\n");
3063 e1000_free_irq(adapter);
3065 err = e1000_request_irq(adapter);
3071 * e1000_open - Called when a network interface is made active
3072 * @netdev: network interface device structure
3074 * Returns 0 on success, negative value on failure
3076 * The open entry point is called when a network interface is made
3077 * active by the system (IFF_UP). At this point all resources needed
3078 * for transmit and receive operations are allocated, the interrupt
3079 * handler is registered with the OS, the watchdog timer is started,
3080 * and the stack is notified that the interface is ready.
3082 static int e1000_open(struct net_device *netdev)
3084 struct e1000_adapter *adapter = netdev_priv(netdev);
3085 struct e1000_hw *hw = &adapter->hw;
3088 /* disallow open during test */
3089 if (test_bit(__E1000_TESTING, &adapter->state))
3092 netif_carrier_off(netdev);
3094 /* allocate transmit descriptors */
3095 err = e1000e_setup_tx_resources(adapter);
3099 /* allocate receive descriptors */
3100 err = e1000e_setup_rx_resources(adapter);
3104 e1000e_power_up_phy(adapter);
3106 adapter->mng_vlan_id = E1000_MNG_VLAN_NONE;
3107 if ((adapter->hw.mng_cookie.status &
3108 E1000_MNG_DHCP_COOKIE_STATUS_VLAN))
3109 e1000_update_mng_vlan(adapter);
3112 * If AMT is enabled, let the firmware know that the network
3113 * interface is now open
3115 if (adapter->flags & FLAG_HAS_AMT)
3116 e1000_get_hw_control(adapter);
3119 * before we allocate an interrupt, we must be ready to handle it.
3120 * Setting DEBUG_SHIRQ in the kernel makes it fire an interrupt
3121 * as soon as we call pci_request_irq, so we have to setup our
3122 * clean_rx handler before we do so.
3124 e1000_configure(adapter);
3126 err = e1000_request_irq(adapter);
3131 * Work around PCIe errata with MSI interrupts causing some chipsets to
3132 * ignore e1000e MSI messages, which means we need to test our MSI
3135 if (adapter->int_mode != E1000E_INT_MODE_LEGACY) {
3136 err = e1000_test_msi(adapter);
3138 e_err("Interrupt allocation failed\n");
3143 /* From here on the code is the same as e1000e_up() */
3144 clear_bit(__E1000_DOWN, &adapter->state);
3146 napi_enable(&adapter->napi);
3148 e1000_irq_enable(adapter);
3150 netif_start_queue(netdev);
3152 /* fire a link status change interrupt to start the watchdog */
3153 ew32(ICS, E1000_ICS_LSC);
3158 e1000_release_hw_control(adapter);
3159 e1000_power_down_phy(adapter);
3160 e1000e_free_rx_resources(adapter);
3162 e1000e_free_tx_resources(adapter);
3164 e1000e_reset(adapter);
3170 * e1000_close - Disables a network interface
3171 * @netdev: network interface device structure
3173 * Returns 0, this is not allowed to fail
3175 * The close entry point is called when an interface is de-activated
3176 * by the OS. The hardware is still under the drivers control, but
3177 * needs to be disabled. A global MAC reset is issued to stop the
3178 * hardware, and all transmit and receive resources are freed.
3180 static int e1000_close(struct net_device *netdev)
3182 struct e1000_adapter *adapter = netdev_priv(netdev);
3184 WARN_ON(test_bit(__E1000_RESETTING, &adapter->state));
3185 e1000e_down(adapter);
3186 e1000_power_down_phy(adapter);
3187 e1000_free_irq(adapter);
3189 e1000e_free_tx_resources(adapter);
3190 e1000e_free_rx_resources(adapter);
3193 * kill manageability vlan ID if supported, but not if a vlan with
3194 * the same ID is registered on the host OS (let 8021q kill it)
3196 if ((adapter->hw.mng_cookie.status &
3197 E1000_MNG_DHCP_COOKIE_STATUS_VLAN) &&
3199 vlan_group_get_device(adapter->vlgrp, adapter->mng_vlan_id)))
3200 e1000_vlan_rx_kill_vid(netdev, adapter->mng_vlan_id);
3203 * If AMT is enabled, let the firmware know that the network
3204 * interface is now closed
3206 if (adapter->flags & FLAG_HAS_AMT)
3207 e1000_release_hw_control(adapter);
3212 * e1000_set_mac - Change the Ethernet Address of the NIC
3213 * @netdev: network interface device structure
3214 * @p: pointer to an address structure
3216 * Returns 0 on success, negative on failure
3218 static int e1000_set_mac(struct net_device *netdev, void *p)
3220 struct e1000_adapter *adapter = netdev_priv(netdev);
3221 struct sockaddr *addr = p;
3223 if (!is_valid_ether_addr(addr->sa_data))
3224 return -EADDRNOTAVAIL;
3226 memcpy(netdev->dev_addr, addr->sa_data, netdev->addr_len);
3227 memcpy(adapter->hw.mac.addr, addr->sa_data, netdev->addr_len);
3229 e1000e_rar_set(&adapter->hw, adapter->hw.mac.addr, 0);
3231 if (adapter->flags & FLAG_RESET_OVERWRITES_LAA) {
3232 /* activate the work around */
3233 e1000e_set_laa_state_82571(&adapter->hw, 1);
3236 * Hold a copy of the LAA in RAR[14] This is done so that
3237 * between the time RAR[0] gets clobbered and the time it
3238 * gets fixed (in e1000_watchdog), the actual LAA is in one
3239 * of the RARs and no incoming packets directed to this port
3240 * are dropped. Eventually the LAA will be in RAR[0] and
3243 e1000e_rar_set(&adapter->hw,
3244 adapter->hw.mac.addr,
3245 adapter->hw.mac.rar_entry_count - 1);
3252 * e1000e_update_phy_task - work thread to update phy
3253 * @work: pointer to our work struct
3255 * this worker thread exists because we must acquire a
3256 * semaphore to read the phy, which we could msleep while
3257 * waiting for it, and we can't msleep in a timer.
3259 static void e1000e_update_phy_task(struct work_struct *work)
3261 struct e1000_adapter *adapter = container_of(work,
3262 struct e1000_adapter, update_phy_task);
3263 e1000_get_phy_info(&adapter->hw);
3267 * Need to wait a few seconds after link up to get diagnostic information from
3270 static void e1000_update_phy_info(unsigned long data)
3272 struct e1000_adapter *adapter = (struct e1000_adapter *) data;
3273 schedule_work(&adapter->update_phy_task);
3277 * e1000e_update_stats - Update the board statistics counters
3278 * @adapter: board private structure
3280 void e1000e_update_stats(struct e1000_adapter *adapter)
3282 struct net_device *netdev = adapter->netdev;
3283 struct e1000_hw *hw = &adapter->hw;
3284 struct pci_dev *pdev = adapter->pdev;
3288 * Prevent stats update while adapter is being reset, or if the pci
3289 * connection is down.
3291 if (adapter->link_speed == 0)
3293 if (pci_channel_offline(pdev))
3296 adapter->stats.crcerrs += er32(CRCERRS);
3297 adapter->stats.gprc += er32(GPRC);
3298 adapter->stats.gorc += er32(GORCL);
3299 er32(GORCH); /* Clear gorc */
3300 adapter->stats.bprc += er32(BPRC);
3301 adapter->stats.mprc += er32(MPRC);
3302 adapter->stats.roc += er32(ROC);
3304 adapter->stats.mpc += er32(MPC);
3305 if ((hw->phy.type == e1000_phy_82578) ||
3306 (hw->phy.type == e1000_phy_82577)) {
3307 e1e_rphy(hw, HV_SCC_UPPER, &phy_data);
3308 if (!e1e_rphy(hw, HV_SCC_LOWER, &phy_data))
3309 adapter->stats.scc += phy_data;
3311 e1e_rphy(hw, HV_ECOL_UPPER, &phy_data);
3312 if (!e1e_rphy(hw, HV_ECOL_LOWER, &phy_data))
3313 adapter->stats.ecol += phy_data;
3315 e1e_rphy(hw, HV_MCC_UPPER, &phy_data);
3316 if (!e1e_rphy(hw, HV_MCC_LOWER, &phy_data))
3317 adapter->stats.mcc += phy_data;
3319 e1e_rphy(hw, HV_LATECOL_UPPER, &phy_data);
3320 if (!e1e_rphy(hw, HV_LATECOL_LOWER, &phy_data))
3321 adapter->stats.latecol += phy_data;
3323 e1e_rphy(hw, HV_DC_UPPER, &phy_data);
3324 if (!e1e_rphy(hw, HV_DC_LOWER, &phy_data))
3325 adapter->stats.dc += phy_data;
3327 adapter->stats.scc += er32(SCC);
3328 adapter->stats.ecol += er32(ECOL);
3329 adapter->stats.mcc += er32(MCC);
3330 adapter->stats.latecol += er32(LATECOL);
3331 adapter->stats.dc += er32(DC);
3333 adapter->stats.xonrxc += er32(XONRXC);
3334 adapter->stats.xontxc += er32(XONTXC);
3335 adapter->stats.xoffrxc += er32(XOFFRXC);
3336 adapter->stats.xofftxc += er32(XOFFTXC);
3337 adapter->stats.gptc += er32(GPTC);
3338 adapter->stats.gotc += er32(GOTCL);
3339 er32(GOTCH); /* Clear gotc */
3340 adapter->stats.rnbc += er32(RNBC);
3341 adapter->stats.ruc += er32(RUC);
3343 adapter->stats.mptc += er32(MPTC);
3344 adapter->stats.bptc += er32(BPTC);
3346 /* used for adaptive IFS */
3348 hw->mac.tx_packet_delta = er32(TPT);
3349 adapter->stats.tpt += hw->mac.tx_packet_delta;
3350 if ((hw->phy.type == e1000_phy_82578) ||
3351 (hw->phy.type == e1000_phy_82577)) {
3352 e1e_rphy(hw, HV_COLC_UPPER, &phy_data);
3353 if (!e1e_rphy(hw, HV_COLC_LOWER, &phy_data))
3354 hw->mac.collision_delta = phy_data;
3356 hw->mac.collision_delta = er32(COLC);
3358 adapter->stats.colc += hw->mac.collision_delta;
3360 adapter->stats.algnerrc += er32(ALGNERRC);
3361 adapter->stats.rxerrc += er32(RXERRC);
3362 if ((hw->phy.type == e1000_phy_82578) ||
3363 (hw->phy.type == e1000_phy_82577)) {
3364 e1e_rphy(hw, HV_TNCRS_UPPER, &phy_data);
3365 if (!e1e_rphy(hw, HV_TNCRS_LOWER, &phy_data))
3366 adapter->stats.tncrs += phy_data;
3368 if ((hw->mac.type != e1000_82574) &&
3369 (hw->mac.type != e1000_82583))
3370 adapter->stats.tncrs += er32(TNCRS);
3372 adapter->stats.cexterr += er32(CEXTERR);
3373 adapter->stats.tsctc += er32(TSCTC);
3374 adapter->stats.tsctfc += er32(TSCTFC);
3376 /* Fill out the OS statistics structure */
3377 netdev->stats.multicast = adapter->stats.mprc;
3378 netdev->stats.collisions = adapter->stats.colc;
3383 * RLEC on some newer hardware can be incorrect so build
3384 * our own version based on RUC and ROC
3386 netdev->stats.rx_errors = adapter->stats.rxerrc +
3387 adapter->stats.crcerrs + adapter->stats.algnerrc +
3388 adapter->stats.ruc + adapter->stats.roc +
3389 adapter->stats.cexterr;
3390 netdev->stats.rx_length_errors = adapter->stats.ruc +
3392 netdev->stats.rx_crc_errors = adapter->stats.crcerrs;
3393 netdev->stats.rx_frame_errors = adapter->stats.algnerrc;
3394 netdev->stats.rx_missed_errors = adapter->stats.mpc;
3397 netdev->stats.tx_errors = adapter->stats.ecol +
3398 adapter->stats.latecol;
3399 netdev->stats.tx_aborted_errors = adapter->stats.ecol;
3400 netdev->stats.tx_window_errors = adapter->stats.latecol;
3401 netdev->stats.tx_carrier_errors = adapter->stats.tncrs;
3403 /* Tx Dropped needs to be maintained elsewhere */
3405 /* Management Stats */
3406 adapter->stats.mgptc += er32(MGTPTC);
3407 adapter->stats.mgprc += er32(MGTPRC);
3408 adapter->stats.mgpdc += er32(MGTPDC);
3412 * e1000_phy_read_status - Update the PHY register status snapshot
3413 * @adapter: board private structure
3415 static void e1000_phy_read_status(struct e1000_adapter *adapter)
3417 struct e1000_hw *hw = &adapter->hw;
3418 struct e1000_phy_regs *phy = &adapter->phy_regs;
3421 if ((er32(STATUS) & E1000_STATUS_LU) &&
3422 (adapter->hw.phy.media_type == e1000_media_type_copper)) {
3423 ret_val = e1e_rphy(hw, PHY_CONTROL, &phy->bmcr);
3424 ret_val |= e1e_rphy(hw, PHY_STATUS, &phy->bmsr);
3425 ret_val |= e1e_rphy(hw, PHY_AUTONEG_ADV, &phy->advertise);
3426 ret_val |= e1e_rphy(hw, PHY_LP_ABILITY, &phy->lpa);
3427 ret_val |= e1e_rphy(hw, PHY_AUTONEG_EXP, &phy->expansion);
3428 ret_val |= e1e_rphy(hw, PHY_1000T_CTRL, &phy->ctrl1000);
3429 ret_val |= e1e_rphy(hw, PHY_1000T_STATUS, &phy->stat1000);
3430 ret_val |= e1e_rphy(hw, PHY_EXT_STATUS, &phy->estatus);
3432 e_warn("Error reading PHY register\n");
3435 * Do not read PHY registers if link is not up
3436 * Set values to typical power-on defaults
3438 phy->bmcr = (BMCR_SPEED1000 | BMCR_ANENABLE | BMCR_FULLDPLX);
3439 phy->bmsr = (BMSR_100FULL | BMSR_100HALF | BMSR_10FULL |
3440 BMSR_10HALF | BMSR_ESTATEN | BMSR_ANEGCAPABLE |
3442 phy->advertise = (ADVERTISE_PAUSE_ASYM | ADVERTISE_PAUSE_CAP |
3443 ADVERTISE_ALL | ADVERTISE_CSMA);
3445 phy->expansion = EXPANSION_ENABLENPAGE;
3446 phy->ctrl1000 = ADVERTISE_1000FULL;
3448 phy->estatus = (ESTATUS_1000_TFULL | ESTATUS_1000_THALF);
3452 static void e1000_print_link_info(struct e1000_adapter *adapter)
3454 struct e1000_hw *hw = &adapter->hw;
3455 u32 ctrl = er32(CTRL);
3457 /* Link status message must follow this format for user tools */
3458 printk(KERN_INFO "e1000e: %s NIC Link is Up %d Mbps %s, "
3459 "Flow Control: %s\n",
3460 adapter->netdev->name,
3461 adapter->link_speed,
3462 (adapter->link_duplex == FULL_DUPLEX) ?
3463 "Full Duplex" : "Half Duplex",
3464 ((ctrl & E1000_CTRL_TFCE) && (ctrl & E1000_CTRL_RFCE)) ?
3466 ((ctrl & E1000_CTRL_RFCE) ? "RX" :
3467 ((ctrl & E1000_CTRL_TFCE) ? "TX" : "None" )));
3470 bool e1000e_has_link(struct e1000_adapter *adapter)
3472 struct e1000_hw *hw = &adapter->hw;
3473 bool link_active = 0;
3477 * get_link_status is set on LSC (link status) interrupt or
3478 * Rx sequence error interrupt. get_link_status will stay
3479 * false until the check_for_link establishes link
3480 * for copper adapters ONLY
3482 switch (hw->phy.media_type) {
3483 case e1000_media_type_copper:
3484 if (hw->mac.get_link_status) {
3485 ret_val = hw->mac.ops.check_for_link(hw);
3486 link_active = !hw->mac.get_link_status;
3491 case e1000_media_type_fiber:
3492 ret_val = hw->mac.ops.check_for_link(hw);
3493 link_active = !!(er32(STATUS) & E1000_STATUS_LU);
3495 case e1000_media_type_internal_serdes:
3496 ret_val = hw->mac.ops.check_for_link(hw);
3497 link_active = adapter->hw.mac.serdes_has_link;
3500 case e1000_media_type_unknown:
3504 if ((ret_val == E1000_ERR_PHY) && (hw->phy.type == e1000_phy_igp_3) &&
3505 (er32(CTRL) & E1000_PHY_CTRL_GBE_DISABLE)) {
3506 /* See e1000_kmrn_lock_loss_workaround_ich8lan() */
3507 e_info("Gigabit has been disabled, downgrading speed\n");
3513 static void e1000e_enable_receives(struct e1000_adapter *adapter)
3515 /* make sure the receive unit is started */
3516 if ((adapter->flags & FLAG_RX_NEEDS_RESTART) &&
3517 (adapter->flags & FLAG_RX_RESTART_NOW)) {
3518 struct e1000_hw *hw = &adapter->hw;
3519 u32 rctl = er32(RCTL);
3520 ew32(RCTL, rctl | E1000_RCTL_EN);
3521 adapter->flags &= ~FLAG_RX_RESTART_NOW;
3526 * e1000_watchdog - Timer Call-back
3527 * @data: pointer to adapter cast into an unsigned long
3529 static void e1000_watchdog(unsigned long data)
3531 struct e1000_adapter *adapter = (struct e1000_adapter *) data;
3533 /* Do the rest outside of interrupt context */
3534 schedule_work(&adapter->watchdog_task);
3536 /* TODO: make this use queue_delayed_work() */
3539 static void e1000_watchdog_task(struct work_struct *work)
3541 struct e1000_adapter *adapter = container_of(work,
3542 struct e1000_adapter, watchdog_task);
3543 struct net_device *netdev = adapter->netdev;
3544 struct e1000_mac_info *mac = &adapter->hw.mac;
3545 struct e1000_phy_info *phy = &adapter->hw.phy;
3546 struct e1000_ring *tx_ring = adapter->tx_ring;
3547 struct e1000_hw *hw = &adapter->hw;
3551 link = e1000e_has_link(adapter);
3552 if ((netif_carrier_ok(netdev)) && link) {
3553 e1000e_enable_receives(adapter);
3557 if ((e1000e_enable_tx_pkt_filtering(hw)) &&
3558 (adapter->mng_vlan_id != adapter->hw.mng_cookie.vlan_id))
3559 e1000_update_mng_vlan(adapter);
3562 if (!netif_carrier_ok(netdev)) {
3564 /* update snapshot of PHY registers on LSC */
3565 e1000_phy_read_status(adapter);
3566 mac->ops.get_link_up_info(&adapter->hw,
3567 &adapter->link_speed,
3568 &adapter->link_duplex);
3569 e1000_print_link_info(adapter);
3571 * On supported PHYs, check for duplex mismatch only
3572 * if link has autonegotiated at 10/100 half
3574 if ((hw->phy.type == e1000_phy_igp_3 ||
3575 hw->phy.type == e1000_phy_bm) &&
3576 (hw->mac.autoneg == true) &&
3577 (adapter->link_speed == SPEED_10 ||
3578 adapter->link_speed == SPEED_100) &&
3579 (adapter->link_duplex == HALF_DUPLEX)) {
3582 e1e_rphy(hw, PHY_AUTONEG_EXP, &autoneg_exp);
3584 if (!(autoneg_exp & NWAY_ER_LP_NWAY_CAPS))
3585 e_info("Autonegotiated half duplex but"
3586 " link partner cannot autoneg. "
3587 " Try forcing full duplex if "
3588 "link gets many collisions.\n");
3592 * tweak tx_queue_len according to speed/duplex
3593 * and adjust the timeout factor
3595 netdev->tx_queue_len = adapter->tx_queue_len;
3596 adapter->tx_timeout_factor = 1;
3597 switch (adapter->link_speed) {
3600 netdev->tx_queue_len = 10;
3601 adapter->tx_timeout_factor = 16;
3605 netdev->tx_queue_len = 100;
3606 adapter->tx_timeout_factor = 10;
3611 * workaround: re-program speed mode bit after
3614 if ((adapter->flags & FLAG_TARC_SPEED_MODE_BIT) &&
3617 tarc0 = er32(TARC(0));
3618 tarc0 &= ~SPEED_MODE_BIT;
3619 ew32(TARC(0), tarc0);
3623 * disable TSO for pcie and 10/100 speeds, to avoid
3624 * some hardware issues
3626 if (!(adapter->flags & FLAG_TSO_FORCE)) {
3627 switch (adapter->link_speed) {
3630 e_info("10/100 speed: disabling TSO\n");
3631 netdev->features &= ~NETIF_F_TSO;
3632 netdev->features &= ~NETIF_F_TSO6;
3635 netdev->features |= NETIF_F_TSO;
3636 netdev->features |= NETIF_F_TSO6;
3645 * enable transmits in the hardware, need to do this
3646 * after setting TARC(0)
3649 tctl |= E1000_TCTL_EN;
3653 * Perform any post-link-up configuration before
3654 * reporting link up.
3656 if (phy->ops.cfg_on_link_up)
3657 phy->ops.cfg_on_link_up(hw);
3659 netif_carrier_on(netdev);
3661 if (!test_bit(__E1000_DOWN, &adapter->state))
3662 mod_timer(&adapter->phy_info_timer,
3663 round_jiffies(jiffies + 2 * HZ));
3666 if (netif_carrier_ok(netdev)) {
3667 adapter->link_speed = 0;
3668 adapter->link_duplex = 0;
3669 /* Link status message must follow this format */
3670 printk(KERN_INFO "e1000e: %s NIC Link is Down\n",
3671 adapter->netdev->name);
3672 netif_carrier_off(netdev);
3673 if (!test_bit(__E1000_DOWN, &adapter->state))
3674 mod_timer(&adapter->phy_info_timer,
3675 round_jiffies(jiffies + 2 * HZ));
3677 if (adapter->flags & FLAG_RX_NEEDS_RESTART)
3678 schedule_work(&adapter->reset_task);
3683 e1000e_update_stats(adapter);
3685 mac->tx_packet_delta = adapter->stats.tpt - adapter->tpt_old;
3686 adapter->tpt_old = adapter->stats.tpt;
3687 mac->collision_delta = adapter->stats.colc - adapter->colc_old;
3688 adapter->colc_old = adapter->stats.colc;
3690 adapter->gorc = adapter->stats.gorc - adapter->gorc_old;
3691 adapter->gorc_old = adapter->stats.gorc;
3692 adapter->gotc = adapter->stats.gotc - adapter->gotc_old;
3693 adapter->gotc_old = adapter->stats.gotc;
3695 e1000e_update_adaptive(&adapter->hw);
3697 if (!netif_carrier_ok(netdev)) {
3698 tx_pending = (e1000_desc_unused(tx_ring) + 1 <
3702 * We've lost link, so the controller stops DMA,
3703 * but we've got queued Tx work that's never going
3704 * to get done, so reset controller to flush Tx.
3705 * (Do the reset outside of interrupt context).
3707 adapter->tx_timeout_count++;
3708 schedule_work(&adapter->reset_task);
3709 /* return immediately since reset is imminent */
3714 /* Cause software interrupt to ensure Rx ring is cleaned */
3715 if (adapter->msix_entries)
3716 ew32(ICS, adapter->rx_ring->ims_val);
3718 ew32(ICS, E1000_ICS_RXDMT0);
3720 /* Force detection of hung controller every watchdog period */
3721 adapter->detect_tx_hung = 1;
3724 * With 82571 controllers, LAA may be overwritten due to controller
3725 * reset from the other port. Set the appropriate LAA in RAR[0]
3727 if (e1000e_get_laa_state_82571(hw))
3728 e1000e_rar_set(hw, adapter->hw.mac.addr, 0);
3730 /* Reset the timer */
3731 if (!test_bit(__E1000_DOWN, &adapter->state))
3732 mod_timer(&adapter->watchdog_timer,
3733 round_jiffies(jiffies + 2 * HZ));
3736 #define E1000_TX_FLAGS_CSUM 0x00000001
3737 #define E1000_TX_FLAGS_VLAN 0x00000002
3738 #define E1000_TX_FLAGS_TSO 0x00000004
3739 #define E1000_TX_FLAGS_IPV4 0x00000008
3740 #define E1000_TX_FLAGS_VLAN_MASK 0xffff0000
3741 #define E1000_TX_FLAGS_VLAN_SHIFT 16
3743 static int e1000_tso(struct e1000_adapter *adapter,
3744 struct sk_buff *skb)
3746 struct e1000_ring *tx_ring = adapter->tx_ring;
3747 struct e1000_context_desc *context_desc;
3748 struct e1000_buffer *buffer_info;
3751 u16 ipcse = 0, tucse, mss;
3752 u8 ipcss, ipcso, tucss, tucso, hdr_len;
3755 if (!skb_is_gso(skb))
3758 if (skb_header_cloned(skb)) {
3759 err = pskb_expand_head(skb, 0, 0, GFP_ATOMIC);
3764 hdr_len = skb_transport_offset(skb) + tcp_hdrlen(skb);
3765 mss = skb_shinfo(skb)->gso_size;
3766 if (skb->protocol == htons(ETH_P_IP)) {
3767 struct iphdr *iph = ip_hdr(skb);
3770 tcp_hdr(skb)->check = ~csum_tcpudp_magic(iph->saddr, iph->daddr,
3772 cmd_length = E1000_TXD_CMD_IP;
3773 ipcse = skb_transport_offset(skb) - 1;
3774 } else if (skb_is_gso_v6(skb)) {
3775 ipv6_hdr(skb)->payload_len = 0;
3776 tcp_hdr(skb)->check = ~csum_ipv6_magic(&ipv6_hdr(skb)->saddr,
3777 &ipv6_hdr(skb)->daddr,
3781 ipcss = skb_network_offset(skb);
3782 ipcso = (void *)&(ip_hdr(skb)->check) - (void *)skb->data;
3783 tucss = skb_transport_offset(skb);
3784 tucso = (void *)&(tcp_hdr(skb)->check) - (void *)skb->data;
3787 cmd_length |= (E1000_TXD_CMD_DEXT | E1000_TXD_CMD_TSE |
3788 E1000_TXD_CMD_TCP | (skb->len - (hdr_len)));
3790 i = tx_ring->next_to_use;
3791 context_desc = E1000_CONTEXT_DESC(*tx_ring, i);
3792 buffer_info = &tx_ring->buffer_info[i];
3794 context_desc->lower_setup.ip_fields.ipcss = ipcss;
3795 context_desc->lower_setup.ip_fields.ipcso = ipcso;
3796 context_desc->lower_setup.ip_fields.ipcse = cpu_to_le16(ipcse);
3797 context_desc->upper_setup.tcp_fields.tucss = tucss;
3798 context_desc->upper_setup.tcp_fields.tucso = tucso;
3799 context_desc->upper_setup.tcp_fields.tucse = cpu_to_le16(tucse);
3800 context_desc->tcp_seg_setup.fields.mss = cpu_to_le16(mss);
3801 context_desc->tcp_seg_setup.fields.hdr_len = hdr_len;
3802 context_desc->cmd_and_length = cpu_to_le32(cmd_length);
3804 buffer_info->time_stamp = jiffies;
3805 buffer_info->next_to_watch = i;
3808 if (i == tx_ring->count)
3810 tx_ring->next_to_use = i;
3815 static bool e1000_tx_csum(struct e1000_adapter *adapter, struct sk_buff *skb)
3817 struct e1000_ring *tx_ring = adapter->tx_ring;
3818 struct e1000_context_desc *context_desc;
3819 struct e1000_buffer *buffer_info;
3822 u32 cmd_len = E1000_TXD_CMD_DEXT;
3825 if (skb->ip_summed != CHECKSUM_PARTIAL)
3828 if (skb->protocol == cpu_to_be16(ETH_P_8021Q))
3829 protocol = vlan_eth_hdr(skb)->h_vlan_encapsulated_proto;
3831 protocol = skb->protocol;
3834 case cpu_to_be16(ETH_P_IP):
3835 if (ip_hdr(skb)->protocol == IPPROTO_TCP)
3836 cmd_len |= E1000_TXD_CMD_TCP;
3838 case cpu_to_be16(ETH_P_IPV6):
3839 /* XXX not handling all IPV6 headers */
3840 if (ipv6_hdr(skb)->nexthdr == IPPROTO_TCP)
3841 cmd_len |= E1000_TXD_CMD_TCP;
3844 if (unlikely(net_ratelimit()))
3845 e_warn("checksum_partial proto=%x!\n",
3846 be16_to_cpu(protocol));
3850 css = skb_transport_offset(skb);
3852 i = tx_ring->next_to_use;
3853 buffer_info = &tx_ring->buffer_info[i];
3854 context_desc = E1000_CONTEXT_DESC(*tx_ring, i);
3856 context_desc->lower_setup.ip_config = 0;
3857 context_desc->upper_setup.tcp_fields.tucss = css;
3858 context_desc->upper_setup.tcp_fields.tucso =
3859 css + skb->csum_offset;
3860 context_desc->upper_setup.tcp_fields.tucse = 0;
3861 context_desc->tcp_seg_setup.data = 0;
3862 context_desc->cmd_and_length = cpu_to_le32(cmd_len);
3864 buffer_info->time_stamp = jiffies;
3865 buffer_info->next_to_watch = i;
3868 if (i == tx_ring->count)
3870 tx_ring->next_to_use = i;
3875 #define E1000_MAX_PER_TXD 8192
3876 #define E1000_MAX_TXD_PWR 12
3878 static int e1000_tx_map(struct e1000_adapter *adapter,
3879 struct sk_buff *skb, unsigned int first,
3880 unsigned int max_per_txd, unsigned int nr_frags,
3883 struct e1000_ring *tx_ring = adapter->tx_ring;
3884 struct pci_dev *pdev = adapter->pdev;
3885 struct e1000_buffer *buffer_info;
3886 unsigned int len = skb_headlen(skb);
3887 unsigned int offset = 0, size, count = 0, i;
3890 i = tx_ring->next_to_use;
3893 buffer_info = &tx_ring->buffer_info[i];
3894 size = min(len, max_per_txd);
3896 buffer_info->length = size;
3897 buffer_info->time_stamp = jiffies;
3898 buffer_info->next_to_watch = i;
3899 buffer_info->dma = pci_map_single(pdev, skb->data + offset,
3900 size, PCI_DMA_TODEVICE);
3901 buffer_info->mapped_as_page = false;
3902 if (pci_dma_mapping_error(pdev, buffer_info->dma))
3911 if (i == tx_ring->count)
3916 for (f = 0; f < nr_frags; f++) {
3917 struct skb_frag_struct *frag;
3919 frag = &skb_shinfo(skb)->frags[f];
3921 offset = frag->page_offset;
3925 if (i == tx_ring->count)
3928 buffer_info = &tx_ring->buffer_info[i];
3929 size = min(len, max_per_txd);
3931 buffer_info->length = size;
3932 buffer_info->time_stamp = jiffies;
3933 buffer_info->next_to_watch = i;
3934 buffer_info->dma = pci_map_page(pdev, frag->page,
3937 buffer_info->mapped_as_page = true;
3938 if (pci_dma_mapping_error(pdev, buffer_info->dma))
3947 tx_ring->buffer_info[i].skb = skb;
3948 tx_ring->buffer_info[first].next_to_watch = i;
3953 dev_err(&pdev->dev, "TX DMA map failed\n");
3954 buffer_info->dma = 0;
3960 i += tx_ring->count;
3962 buffer_info = &tx_ring->buffer_info[i];
3963 e1000_put_txbuf(adapter, buffer_info);;
3969 static void e1000_tx_queue(struct e1000_adapter *adapter,
3970 int tx_flags, int count)
3972 struct e1000_ring *tx_ring = adapter->tx_ring;
3973 struct e1000_tx_desc *tx_desc = NULL;
3974 struct e1000_buffer *buffer_info;
3975 u32 txd_upper = 0, txd_lower = E1000_TXD_CMD_IFCS;
3978 if (tx_flags & E1000_TX_FLAGS_TSO) {
3979 txd_lower |= E1000_TXD_CMD_DEXT | E1000_TXD_DTYP_D |
3981 txd_upper |= E1000_TXD_POPTS_TXSM << 8;
3983 if (tx_flags & E1000_TX_FLAGS_IPV4)
3984 txd_upper |= E1000_TXD_POPTS_IXSM << 8;
3987 if (tx_flags & E1000_TX_FLAGS_CSUM) {
3988 txd_lower |= E1000_TXD_CMD_DEXT | E1000_TXD_DTYP_D;
3989 txd_upper |= E1000_TXD_POPTS_TXSM << 8;
3992 if (tx_flags & E1000_TX_FLAGS_VLAN) {
3993 txd_lower |= E1000_TXD_CMD_VLE;
3994 txd_upper |= (tx_flags & E1000_TX_FLAGS_VLAN_MASK);
3997 i = tx_ring->next_to_use;
4000 buffer_info = &tx_ring->buffer_info[i];
4001 tx_desc = E1000_TX_DESC(*tx_ring, i);
4002 tx_desc->buffer_addr = cpu_to_le64(buffer_info->dma);
4003 tx_desc->lower.data =
4004 cpu_to_le32(txd_lower | buffer_info->length);
4005 tx_desc->upper.data = cpu_to_le32(txd_upper);
4008 if (i == tx_ring->count)
4012 tx_desc->lower.data |= cpu_to_le32(adapter->txd_cmd);
4015 * Force memory writes to complete before letting h/w
4016 * know there are new descriptors to fetch. (Only
4017 * applicable for weak-ordered memory model archs,
4022 tx_ring->next_to_use = i;
4023 writel(i, adapter->hw.hw_addr + tx_ring->tail);
4025 * we need this if more than one processor can write to our tail
4026 * at a time, it synchronizes IO on IA64/Altix systems
4031 #define MINIMUM_DHCP_PACKET_SIZE 282
4032 static int e1000_transfer_dhcp_info(struct e1000_adapter *adapter,
4033 struct sk_buff *skb)
4035 struct e1000_hw *hw = &adapter->hw;
4038 if (vlan_tx_tag_present(skb)) {
4039 if (!((vlan_tx_tag_get(skb) == adapter->hw.mng_cookie.vlan_id) &&
4040 (adapter->hw.mng_cookie.status &
4041 E1000_MNG_DHCP_COOKIE_STATUS_VLAN)))
4045 if (skb->len <= MINIMUM_DHCP_PACKET_SIZE)
4048 if (((struct ethhdr *) skb->data)->h_proto != htons(ETH_P_IP))
4052 const struct iphdr *ip = (struct iphdr *)((u8 *)skb->data+14);
4055 if (ip->protocol != IPPROTO_UDP)
4058 udp = (struct udphdr *)((u8 *)ip + (ip->ihl << 2));
4059 if (ntohs(udp->dest) != 67)
4062 offset = (u8 *)udp + 8 - skb->data;
4063 length = skb->len - offset;
4064 return e1000e_mng_write_dhcp_info(hw, (u8 *)udp + 8, length);
4070 static int __e1000_maybe_stop_tx(struct net_device *netdev, int size)
4072 struct e1000_adapter *adapter = netdev_priv(netdev);
4074 netif_stop_queue(netdev);
4076 * Herbert's original patch had:
4077 * smp_mb__after_netif_stop_queue();
4078 * but since that doesn't exist yet, just open code it.
4083 * We need to check again in a case another CPU has just
4084 * made room available.
4086 if (e1000_desc_unused(adapter->tx_ring) < size)
4090 netif_start_queue(netdev);
4091 ++adapter->restart_queue;
4095 static int e1000_maybe_stop_tx(struct net_device *netdev, int size)
4097 struct e1000_adapter *adapter = netdev_priv(netdev);
4099 if (e1000_desc_unused(adapter->tx_ring) >= size)
4101 return __e1000_maybe_stop_tx(netdev, size);
4104 #define TXD_USE_COUNT(S, X) (((S) >> (X)) + 1 )
4105 static netdev_tx_t e1000_xmit_frame(struct sk_buff *skb,
4106 struct net_device *netdev)
4108 struct e1000_adapter *adapter = netdev_priv(netdev);
4109 struct e1000_ring *tx_ring = adapter->tx_ring;
4111 unsigned int max_per_txd = E1000_MAX_PER_TXD;
4112 unsigned int max_txd_pwr = E1000_MAX_TXD_PWR;
4113 unsigned int tx_flags = 0;
4114 unsigned int len = skb->len - skb->data_len;
4115 unsigned int nr_frags;
4121 if (test_bit(__E1000_DOWN, &adapter->state)) {
4122 dev_kfree_skb_any(skb);
4123 return NETDEV_TX_OK;
4126 if (skb->len <= 0) {
4127 dev_kfree_skb_any(skb);
4128 return NETDEV_TX_OK;
4131 mss = skb_shinfo(skb)->gso_size;
4133 * The controller does a simple calculation to
4134 * make sure there is enough room in the FIFO before
4135 * initiating the DMA for each buffer. The calc is:
4136 * 4 = ceil(buffer len/mss). To make sure we don't
4137 * overrun the FIFO, adjust the max buffer len if mss
4142 max_per_txd = min(mss << 2, max_per_txd);
4143 max_txd_pwr = fls(max_per_txd) - 1;
4146 * TSO Workaround for 82571/2/3 Controllers -- if skb->data
4147 * points to just header, pull a few bytes of payload from
4148 * frags into skb->data
4150 hdr_len = skb_transport_offset(skb) + tcp_hdrlen(skb);
4152 * we do this workaround for ES2LAN, but it is un-necessary,
4153 * avoiding it could save a lot of cycles
4155 if (skb->data_len && (hdr_len == len)) {
4156 unsigned int pull_size;
4158 pull_size = min((unsigned int)4, skb->data_len);
4159 if (!__pskb_pull_tail(skb, pull_size)) {
4160 e_err("__pskb_pull_tail failed.\n");
4161 dev_kfree_skb_any(skb);
4162 return NETDEV_TX_OK;
4164 len = skb->len - skb->data_len;
4168 /* reserve a descriptor for the offload context */
4169 if ((mss) || (skb->ip_summed == CHECKSUM_PARTIAL))
4173 count += TXD_USE_COUNT(len, max_txd_pwr);
4175 nr_frags = skb_shinfo(skb)->nr_frags;
4176 for (f = 0; f < nr_frags; f++)
4177 count += TXD_USE_COUNT(skb_shinfo(skb)->frags[f].size,
4180 if (adapter->hw.mac.tx_pkt_filtering)
4181 e1000_transfer_dhcp_info(adapter, skb);
4184 * need: count + 2 desc gap to keep tail from touching
4185 * head, otherwise try next time
4187 if (e1000_maybe_stop_tx(netdev, count + 2))
4188 return NETDEV_TX_BUSY;
4190 if (adapter->vlgrp && vlan_tx_tag_present(skb)) {
4191 tx_flags |= E1000_TX_FLAGS_VLAN;
4192 tx_flags |= (vlan_tx_tag_get(skb) << E1000_TX_FLAGS_VLAN_SHIFT);
4195 first = tx_ring->next_to_use;
4197 tso = e1000_tso(adapter, skb);
4199 dev_kfree_skb_any(skb);
4200 return NETDEV_TX_OK;
4204 tx_flags |= E1000_TX_FLAGS_TSO;
4205 else if (e1000_tx_csum(adapter, skb))
4206 tx_flags |= E1000_TX_FLAGS_CSUM;
4209 * Old method was to assume IPv4 packet by default if TSO was enabled.
4210 * 82571 hardware supports TSO capabilities for IPv6 as well...
4211 * no longer assume, we must.
4213 if (skb->protocol == htons(ETH_P_IP))
4214 tx_flags |= E1000_TX_FLAGS_IPV4;
4216 /* if count is 0 then mapping error has occured */
4217 count = e1000_tx_map(adapter, skb, first, max_per_txd, nr_frags, mss);
4219 e1000_tx_queue(adapter, tx_flags, count);
4220 /* Make sure there is space in the ring for the next send. */
4221 e1000_maybe_stop_tx(netdev, MAX_SKB_FRAGS + 2);
4224 dev_kfree_skb_any(skb);
4225 tx_ring->buffer_info[first].time_stamp = 0;
4226 tx_ring->next_to_use = first;
4229 return NETDEV_TX_OK;
4233 * e1000_tx_timeout - Respond to a Tx Hang
4234 * @netdev: network interface device structure
4236 static void e1000_tx_timeout(struct net_device *netdev)
4238 struct e1000_adapter *adapter = netdev_priv(netdev);
4240 /* Do the reset outside of interrupt context */
4241 adapter->tx_timeout_count++;
4242 schedule_work(&adapter->reset_task);
4245 static void e1000_reset_task(struct work_struct *work)
4247 struct e1000_adapter *adapter;
4248 adapter = container_of(work, struct e1000_adapter, reset_task);
4250 e1000e_reinit_locked(adapter);
4254 * e1000_get_stats - Get System Network Statistics
4255 * @netdev: network interface device structure
4257 * Returns the address of the device statistics structure.
4258 * The statistics are actually updated from the timer callback.
4260 static struct net_device_stats *e1000_get_stats(struct net_device *netdev)
4262 /* only return the current stats */
4263 return &netdev->stats;
4267 * e1000_change_mtu - Change the Maximum Transfer Unit
4268 * @netdev: network interface device structure
4269 * @new_mtu: new value for maximum frame size
4271 * Returns 0 on success, negative on failure
4273 static int e1000_change_mtu(struct net_device *netdev, int new_mtu)
4275 struct e1000_adapter *adapter = netdev_priv(netdev);
4276 int max_frame = new_mtu + ETH_HLEN + ETH_FCS_LEN;
4278 /* Jumbo frame support */
4279 if ((max_frame > ETH_FRAME_LEN + ETH_FCS_LEN) &&
4280 !(adapter->flags & FLAG_HAS_JUMBO_FRAMES)) {
4281 e_err("Jumbo Frames not supported.\n");
4285 /* Supported frame sizes */
4286 if ((new_mtu < ETH_ZLEN + ETH_FCS_LEN + VLAN_HLEN) ||
4287 (max_frame > adapter->max_hw_frame_size)) {
4288 e_err("Unsupported MTU setting\n");
4292 while (test_and_set_bit(__E1000_RESETTING, &adapter->state))
4294 /* e1000e_down -> e1000e_reset dependent on max_frame_size & mtu */
4295 adapter->max_frame_size = max_frame;
4296 e_info("changing MTU from %d to %d\n", netdev->mtu, new_mtu);
4297 netdev->mtu = new_mtu;
4298 if (netif_running(netdev))
4299 e1000e_down(adapter);
4302 * NOTE: netdev_alloc_skb reserves 16 bytes, and typically NET_IP_ALIGN
4303 * means we reserve 2 more, this pushes us to allocate from the next
4305 * i.e. RXBUFFER_2048 --> size-4096 slab
4306 * However with the new *_jumbo_rx* routines, jumbo receives will use
4310 if (max_frame <= 2048)
4311 adapter->rx_buffer_len = 2048;
4313 adapter->rx_buffer_len = 4096;
4315 /* adjust allocation if LPE protects us, and we aren't using SBP */
4316 if ((max_frame == ETH_FRAME_LEN + ETH_FCS_LEN) ||
4317 (max_frame == ETH_FRAME_LEN + VLAN_HLEN + ETH_FCS_LEN))
4318 adapter->rx_buffer_len = ETH_FRAME_LEN + VLAN_HLEN
4321 if (netif_running(netdev))
4324 e1000e_reset(adapter);
4326 clear_bit(__E1000_RESETTING, &adapter->state);
4331 static int e1000_mii_ioctl(struct net_device *netdev, struct ifreq *ifr,
4334 struct e1000_adapter *adapter = netdev_priv(netdev);
4335 struct mii_ioctl_data *data = if_mii(ifr);
4337 if (adapter->hw.phy.media_type != e1000_media_type_copper)
4342 data->phy_id = adapter->hw.phy.addr;
4345 e1000_phy_read_status(adapter);
4347 switch (data->reg_num & 0x1F) {
4349 data->val_out = adapter->phy_regs.bmcr;
4352 data->val_out = adapter->phy_regs.bmsr;
4355 data->val_out = (adapter->hw.phy.id >> 16);
4358 data->val_out = (adapter->hw.phy.id & 0xFFFF);
4361 data->val_out = adapter->phy_regs.advertise;
4364 data->val_out = adapter->phy_regs.lpa;
4367 data->val_out = adapter->phy_regs.expansion;
4370 data->val_out = adapter->phy_regs.ctrl1000;
4373 data->val_out = adapter->phy_regs.stat1000;
4376 data->val_out = adapter->phy_regs.estatus;
4389 static int e1000_ioctl(struct net_device *netdev, struct ifreq *ifr, int cmd)
4395 return e1000_mii_ioctl(netdev, ifr, cmd);
4401 static int e1000_init_phy_wakeup(struct e1000_adapter *adapter, u32 wufc)
4403 struct e1000_hw *hw = &adapter->hw;
4408 /* copy MAC RARs to PHY RARs */
4409 for (i = 0; i < adapter->hw.mac.rar_entry_count; i++) {
4410 mac_reg = er32(RAL(i));
4411 e1e_wphy(hw, BM_RAR_L(i), (u16)(mac_reg & 0xFFFF));
4412 e1e_wphy(hw, BM_RAR_M(i), (u16)((mac_reg >> 16) & 0xFFFF));
4413 mac_reg = er32(RAH(i));
4414 e1e_wphy(hw, BM_RAR_H(i), (u16)(mac_reg & 0xFFFF));
4415 e1e_wphy(hw, BM_RAR_CTRL(i), (u16)((mac_reg >> 16) & 0xFFFF));
4418 /* copy MAC MTA to PHY MTA */
4419 for (i = 0; i < adapter->hw.mac.mta_reg_count; i++) {
4420 mac_reg = E1000_READ_REG_ARRAY(hw, E1000_MTA, i);
4421 e1e_wphy(hw, BM_MTA(i), (u16)(mac_reg & 0xFFFF));
4422 e1e_wphy(hw, BM_MTA(i) + 1, (u16)((mac_reg >> 16) & 0xFFFF));
4425 /* configure PHY Rx Control register */
4426 e1e_rphy(&adapter->hw, BM_RCTL, &phy_reg);
4427 mac_reg = er32(RCTL);
4428 if (mac_reg & E1000_RCTL_UPE)
4429 phy_reg |= BM_RCTL_UPE;
4430 if (mac_reg & E1000_RCTL_MPE)
4431 phy_reg |= BM_RCTL_MPE;
4432 phy_reg &= ~(BM_RCTL_MO_MASK);
4433 if (mac_reg & E1000_RCTL_MO_3)
4434 phy_reg |= (((mac_reg & E1000_RCTL_MO_3) >> E1000_RCTL_MO_SHIFT)
4435 << BM_RCTL_MO_SHIFT);
4436 if (mac_reg & E1000_RCTL_BAM)
4437 phy_reg |= BM_RCTL_BAM;
4438 if (mac_reg & E1000_RCTL_PMCF)
4439 phy_reg |= BM_RCTL_PMCF;
4440 mac_reg = er32(CTRL);
4441 if (mac_reg & E1000_CTRL_RFCE)
4442 phy_reg |= BM_RCTL_RFCE;
4443 e1e_wphy(&adapter->hw, BM_RCTL, phy_reg);
4445 /* enable PHY wakeup in MAC register */
4447 ew32(WUC, E1000_WUC_PHY_WAKE | E1000_WUC_PME_EN);
4449 /* configure and enable PHY wakeup in PHY registers */
4450 e1e_wphy(&adapter->hw, BM_WUFC, wufc);
4451 e1e_wphy(&adapter->hw, BM_WUC, E1000_WUC_PME_EN);
4453 /* activate PHY wakeup */
4454 retval = hw->phy.ops.acquire(hw);
4456 e_err("Could not acquire PHY\n");
4459 e1000e_write_phy_reg_mdic(hw, IGP01E1000_PHY_PAGE_SELECT,
4460 (BM_WUC_ENABLE_PAGE << IGP_PAGE_SHIFT));
4461 retval = e1000e_read_phy_reg_mdic(hw, BM_WUC_ENABLE_REG, &phy_reg);
4463 e_err("Could not read PHY page 769\n");
4466 phy_reg |= BM_WUC_ENABLE_BIT | BM_WUC_HOST_WU_BIT;
4467 retval = e1000e_write_phy_reg_mdic(hw, BM_WUC_ENABLE_REG, phy_reg);
4469 e_err("Could not set PHY Host Wakeup bit\n");
4471 hw->phy.ops.release(hw);
4476 static int __e1000_shutdown(struct pci_dev *pdev, bool *enable_wake)
4478 struct net_device *netdev = pci_get_drvdata(pdev);
4479 struct e1000_adapter *adapter = netdev_priv(netdev);
4480 struct e1000_hw *hw = &adapter->hw;
4481 u32 ctrl, ctrl_ext, rctl, status;
4482 u32 wufc = adapter->wol;
4485 netif_device_detach(netdev);
4487 if (netif_running(netdev)) {
4488 WARN_ON(test_bit(__E1000_RESETTING, &adapter->state));
4489 e1000e_down(adapter);
4490 e1000_free_irq(adapter);
4492 e1000e_reset_interrupt_capability(adapter);
4494 retval = pci_save_state(pdev);
4498 status = er32(STATUS);
4499 if (status & E1000_STATUS_LU)
4500 wufc &= ~E1000_WUFC_LNKC;
4503 e1000_setup_rctl(adapter);
4504 e1000_set_multi(netdev);
4506 /* turn on all-multi mode if wake on multicast is enabled */
4507 if (wufc & E1000_WUFC_MC) {
4509 rctl |= E1000_RCTL_MPE;
4514 /* advertise wake from D3Cold */
4515 #define E1000_CTRL_ADVD3WUC 0x00100000
4516 /* phy power management enable */
4517 #define E1000_CTRL_EN_PHY_PWR_MGMT 0x00200000
4518 ctrl |= E1000_CTRL_ADVD3WUC;
4519 if (!(adapter->flags2 & FLAG2_HAS_PHY_WAKEUP))
4520 ctrl |= E1000_CTRL_EN_PHY_PWR_MGMT;
4523 if (adapter->hw.phy.media_type == e1000_media_type_fiber ||
4524 adapter->hw.phy.media_type ==
4525 e1000_media_type_internal_serdes) {
4526 /* keep the laser running in D3 */
4527 ctrl_ext = er32(CTRL_EXT);
4528 ctrl_ext |= E1000_CTRL_EXT_SDP3_DATA;
4529 ew32(CTRL_EXT, ctrl_ext);
4532 if (adapter->flags & FLAG_IS_ICH)
4533 e1000e_disable_gig_wol_ich8lan(&adapter->hw);
4535 /* Allow time for pending master requests to run */
4536 e1000e_disable_pcie_master(&adapter->hw);
4538 if (adapter->flags2 & FLAG2_HAS_PHY_WAKEUP) {
4539 /* enable wakeup by the PHY */
4540 retval = e1000_init_phy_wakeup(adapter, wufc);
4544 /* enable wakeup by the MAC */
4546 ew32(WUC, E1000_WUC_PME_EN);
4553 *enable_wake = !!wufc;
4555 /* make sure adapter isn't asleep if manageability is enabled */
4556 if ((adapter->flags & FLAG_MNG_PT_ENABLED) ||
4557 (hw->mac.ops.check_mng_mode(hw)))
4558 *enable_wake = true;
4560 if (adapter->hw.phy.type == e1000_phy_igp_3)
4561 e1000e_igp3_phy_powerdown_workaround_ich8lan(&adapter->hw);
4564 * Release control of h/w to f/w. If f/w is AMT enabled, this
4565 * would have already happened in close and is redundant.
4567 e1000_release_hw_control(adapter);
4569 pci_disable_device(pdev);
4574 static void e1000_power_off(struct pci_dev *pdev, bool sleep, bool wake)
4576 if (sleep && wake) {
4577 pci_prepare_to_sleep(pdev);
4581 pci_wake_from_d3(pdev, wake);
4582 pci_set_power_state(pdev, PCI_D3hot);
4585 static void e1000_complete_shutdown(struct pci_dev *pdev, bool sleep,
4588 struct net_device *netdev = pci_get_drvdata(pdev);
4589 struct e1000_adapter *adapter = netdev_priv(netdev);
4592 * The pci-e switch on some quad port adapters will report a
4593 * correctable error when the MAC transitions from D0 to D3. To
4594 * prevent this we need to mask off the correctable errors on the
4595 * downstream port of the pci-e switch.
4597 if (adapter->flags & FLAG_IS_QUAD_PORT) {
4598 struct pci_dev *us_dev = pdev->bus->self;
4599 int pos = pci_find_capability(us_dev, PCI_CAP_ID_EXP);
4602 pci_read_config_word(us_dev, pos + PCI_EXP_DEVCTL, &devctl);
4603 pci_write_config_word(us_dev, pos + PCI_EXP_DEVCTL,
4604 (devctl & ~PCI_EXP_DEVCTL_CERE));
4606 e1000_power_off(pdev, sleep, wake);
4608 pci_write_config_word(us_dev, pos + PCI_EXP_DEVCTL, devctl);
4610 e1000_power_off(pdev, sleep, wake);
4614 static void e1000e_disable_l1aspm(struct pci_dev *pdev)
4620 * 82573 workaround - disable L1 ASPM on mobile chipsets
4622 * L1 ASPM on various mobile (ich7) chipsets do not behave properly
4623 * resulting in lost data or garbage information on the pci-e link
4624 * level. This could result in (false) bad EEPROM checksum errors,
4625 * long ping times (up to 2s) or even a system freeze/hang.
4627 * Unfortunately this feature saves about 1W power consumption when
4630 pos = pci_find_capability(pdev, PCI_CAP_ID_EXP);
4631 pci_read_config_word(pdev, pos + PCI_EXP_LNKCTL, &val);
4633 dev_warn(&pdev->dev, "Disabling L1 ASPM\n");
4635 pci_write_config_word(pdev, pos + PCI_EXP_LNKCTL, val);
4640 static int e1000_suspend(struct pci_dev *pdev, pm_message_t state)
4645 retval = __e1000_shutdown(pdev, &wake);
4647 e1000_complete_shutdown(pdev, true, wake);
4652 static int e1000_resume(struct pci_dev *pdev)
4654 struct net_device *netdev = pci_get_drvdata(pdev);
4655 struct e1000_adapter *adapter = netdev_priv(netdev);
4656 struct e1000_hw *hw = &adapter->hw;
4659 pci_set_power_state(pdev, PCI_D0);
4660 pci_restore_state(pdev);
4661 pci_save_state(pdev);
4662 e1000e_disable_l1aspm(pdev);
4664 err = pci_enable_device_mem(pdev);
4667 "Cannot enable PCI device from suspend\n");
4671 pci_set_master(pdev);
4673 pci_enable_wake(pdev, PCI_D3hot, 0);
4674 pci_enable_wake(pdev, PCI_D3cold, 0);
4676 e1000e_set_interrupt_capability(adapter);
4677 if (netif_running(netdev)) {
4678 err = e1000_request_irq(adapter);
4683 e1000e_power_up_phy(adapter);
4685 /* report the system wakeup cause from S3/S4 */
4686 if (adapter->flags2 & FLAG2_HAS_PHY_WAKEUP) {
4689 e1e_rphy(&adapter->hw, BM_WUS, &phy_data);
4691 e_info("PHY Wakeup cause - %s\n",
4692 phy_data & E1000_WUS_EX ? "Unicast Packet" :
4693 phy_data & E1000_WUS_MC ? "Multicast Packet" :
4694 phy_data & E1000_WUS_BC ? "Broadcast Packet" :
4695 phy_data & E1000_WUS_MAG ? "Magic Packet" :
4696 phy_data & E1000_WUS_LNKC ? "Link Status "
4697 " Change" : "other");
4699 e1e_wphy(&adapter->hw, BM_WUS, ~0);
4701 u32 wus = er32(WUS);
4703 e_info("MAC Wakeup cause - %s\n",
4704 wus & E1000_WUS_EX ? "Unicast Packet" :
4705 wus & E1000_WUS_MC ? "Multicast Packet" :
4706 wus & E1000_WUS_BC ? "Broadcast Packet" :
4707 wus & E1000_WUS_MAG ? "Magic Packet" :
4708 wus & E1000_WUS_LNKC ? "Link Status Change" :
4714 e1000e_reset(adapter);
4716 e1000_init_manageability(adapter);
4718 if (netif_running(netdev))
4721 netif_device_attach(netdev);
4724 * If the controller has AMT, do not set DRV_LOAD until the interface
4725 * is up. For all other cases, let the f/w know that the h/w is now
4726 * under the control of the driver.
4728 if (!(adapter->flags & FLAG_HAS_AMT))
4729 e1000_get_hw_control(adapter);
4735 static void e1000_shutdown(struct pci_dev *pdev)
4739 __e1000_shutdown(pdev, &wake);
4741 if (system_state == SYSTEM_POWER_OFF)
4742 e1000_complete_shutdown(pdev, false, wake);
4745 #ifdef CONFIG_NET_POLL_CONTROLLER
4747 * Polling 'interrupt' - used by things like netconsole to send skbs
4748 * without having to re-enable interrupts. It's not called while
4749 * the interrupt routine is executing.
4751 static void e1000_netpoll(struct net_device *netdev)
4753 struct e1000_adapter *adapter = netdev_priv(netdev);
4755 disable_irq(adapter->pdev->irq);
4756 e1000_intr(adapter->pdev->irq, netdev);
4758 enable_irq(adapter->pdev->irq);
4763 * e1000_io_error_detected - called when PCI error is detected
4764 * @pdev: Pointer to PCI device
4765 * @state: The current pci connection state
4767 * This function is called after a PCI bus error affecting
4768 * this device has been detected.
4770 static pci_ers_result_t e1000_io_error_detected(struct pci_dev *pdev,
4771 pci_channel_state_t state)
4773 struct net_device *netdev = pci_get_drvdata(pdev);
4774 struct e1000_adapter *adapter = netdev_priv(netdev);
4776 netif_device_detach(netdev);
4778 if (state == pci_channel_io_perm_failure)
4779 return PCI_ERS_RESULT_DISCONNECT;
4781 if (netif_running(netdev))
4782 e1000e_down(adapter);
4783 pci_disable_device(pdev);
4785 /* Request a slot slot reset. */
4786 return PCI_ERS_RESULT_NEED_RESET;
4790 * e1000_io_slot_reset - called after the pci bus has been reset.
4791 * @pdev: Pointer to PCI device
4793 * Restart the card from scratch, as if from a cold-boot. Implementation
4794 * resembles the first-half of the e1000_resume routine.
4796 static pci_ers_result_t e1000_io_slot_reset(struct pci_dev *pdev)
4798 struct net_device *netdev = pci_get_drvdata(pdev);
4799 struct e1000_adapter *adapter = netdev_priv(netdev);
4800 struct e1000_hw *hw = &adapter->hw;
4802 pci_ers_result_t result;
4804 e1000e_disable_l1aspm(pdev);
4805 err = pci_enable_device_mem(pdev);
4808 "Cannot re-enable PCI device after reset.\n");
4809 result = PCI_ERS_RESULT_DISCONNECT;
4811 pci_set_master(pdev);
4812 pci_restore_state(pdev);
4813 pci_save_state(pdev);
4815 pci_enable_wake(pdev, PCI_D3hot, 0);
4816 pci_enable_wake(pdev, PCI_D3cold, 0);
4818 e1000e_reset(adapter);
4820 result = PCI_ERS_RESULT_RECOVERED;
4823 pci_cleanup_aer_uncorrect_error_status(pdev);
4829 * e1000_io_resume - called when traffic can start flowing again.
4830 * @pdev: Pointer to PCI device
4832 * This callback is called when the error recovery driver tells us that
4833 * its OK to resume normal operation. Implementation resembles the
4834 * second-half of the e1000_resume routine.
4836 static void e1000_io_resume(struct pci_dev *pdev)
4838 struct net_device *netdev = pci_get_drvdata(pdev);
4839 struct e1000_adapter *adapter = netdev_priv(netdev);
4841 e1000_init_manageability(adapter);
4843 if (netif_running(netdev)) {
4844 if (e1000e_up(adapter)) {
4846 "can't bring device back up after reset\n");
4851 netif_device_attach(netdev);
4854 * If the controller has AMT, do not set DRV_LOAD until the interface
4855 * is up. For all other cases, let the f/w know that the h/w is now
4856 * under the control of the driver.
4858 if (!(adapter->flags & FLAG_HAS_AMT))
4859 e1000_get_hw_control(adapter);
4863 static void e1000_print_device_info(struct e1000_adapter *adapter)
4865 struct e1000_hw *hw = &adapter->hw;
4866 struct net_device *netdev = adapter->netdev;
4869 /* print bus type/speed/width info */
4870 e_info("(PCI Express:2.5GB/s:%s) %pM\n",
4872 ((hw->bus.width == e1000_bus_width_pcie_x4) ? "Width x4" :
4876 e_info("Intel(R) PRO/%s Network Connection\n",
4877 (hw->phy.type == e1000_phy_ife) ? "10/100" : "1000");
4878 e1000e_read_pba_num(hw, &pba_num);
4879 e_info("MAC: %d, PHY: %d, PBA No: %06x-%03x\n",
4880 hw->mac.type, hw->phy.type, (pba_num >> 8), (pba_num & 0xff));
4883 static void e1000_eeprom_checks(struct e1000_adapter *adapter)
4885 struct e1000_hw *hw = &adapter->hw;
4889 if (hw->mac.type != e1000_82573)
4892 ret_val = e1000_read_nvm(hw, NVM_INIT_CONTROL2_REG, 1, &buf);
4893 if (!ret_val && (!(le16_to_cpu(buf) & (1 << 0)))) {
4894 /* Deep Smart Power Down (DSPD) */
4895 dev_warn(&adapter->pdev->dev,
4896 "Warning: detected DSPD enabled in EEPROM\n");
4899 ret_val = e1000_read_nvm(hw, NVM_INIT_3GIO_3, 1, &buf);
4900 if (!ret_val && (le16_to_cpu(buf) & (3 << 2))) {
4902 dev_warn(&adapter->pdev->dev,
4903 "Warning: detected ASPM enabled in EEPROM\n");
4907 static const struct net_device_ops e1000e_netdev_ops = {
4908 .ndo_open = e1000_open,
4909 .ndo_stop = e1000_close,
4910 .ndo_start_xmit = e1000_xmit_frame,
4911 .ndo_get_stats = e1000_get_stats,
4912 .ndo_set_multicast_list = e1000_set_multi,
4913 .ndo_set_mac_address = e1000_set_mac,
4914 .ndo_change_mtu = e1000_change_mtu,
4915 .ndo_do_ioctl = e1000_ioctl,
4916 .ndo_tx_timeout = e1000_tx_timeout,
4917 .ndo_validate_addr = eth_validate_addr,
4919 .ndo_vlan_rx_register = e1000_vlan_rx_register,
4920 .ndo_vlan_rx_add_vid = e1000_vlan_rx_add_vid,
4921 .ndo_vlan_rx_kill_vid = e1000_vlan_rx_kill_vid,
4922 #ifdef CONFIG_NET_POLL_CONTROLLER
4923 .ndo_poll_controller = e1000_netpoll,
4928 * e1000_probe - Device Initialization Routine
4929 * @pdev: PCI device information struct
4930 * @ent: entry in e1000_pci_tbl
4932 * Returns 0 on success, negative on failure
4934 * e1000_probe initializes an adapter identified by a pci_dev structure.
4935 * The OS initialization, configuring of the adapter private structure,
4936 * and a hardware reset occur.
4938 static int __devinit e1000_probe(struct pci_dev *pdev,
4939 const struct pci_device_id *ent)
4941 struct net_device *netdev;
4942 struct e1000_adapter *adapter;
4943 struct e1000_hw *hw;
4944 const struct e1000_info *ei = e1000_info_tbl[ent->driver_data];
4945 resource_size_t mmio_start, mmio_len;
4946 resource_size_t flash_start, flash_len;
4948 static int cards_found;
4949 int i, err, pci_using_dac;
4950 u16 eeprom_data = 0;
4951 u16 eeprom_apme_mask = E1000_EEPROM_APME;
4953 e1000e_disable_l1aspm(pdev);
4955 err = pci_enable_device_mem(pdev);
4960 err = pci_set_dma_mask(pdev, DMA_BIT_MASK(64));
4962 err = pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(64));
4966 err = pci_set_dma_mask(pdev, DMA_BIT_MASK(32));
4968 err = pci_set_consistent_dma_mask(pdev,
4971 dev_err(&pdev->dev, "No usable DMA "
4972 "configuration, aborting\n");
4978 err = pci_request_selected_regions_exclusive(pdev,
4979 pci_select_bars(pdev, IORESOURCE_MEM),
4980 e1000e_driver_name);
4984 /* AER (Advanced Error Reporting) hooks */
4985 pci_enable_pcie_error_reporting(pdev);
4987 pci_set_master(pdev);
4988 /* PCI config space info */
4989 err = pci_save_state(pdev);
4991 goto err_alloc_etherdev;
4994 netdev = alloc_etherdev(sizeof(struct e1000_adapter));
4996 goto err_alloc_etherdev;
4998 SET_NETDEV_DEV(netdev, &pdev->dev);
5000 pci_set_drvdata(pdev, netdev);
5001 adapter = netdev_priv(netdev);
5003 adapter->netdev = netdev;
5004 adapter->pdev = pdev;
5006 adapter->pba = ei->pba;
5007 adapter->flags = ei->flags;
5008 adapter->flags2 = ei->flags2;
5009 adapter->hw.adapter = adapter;
5010 adapter->hw.mac.type = ei->mac;
5011 adapter->max_hw_frame_size = ei->max_hw_frame_size;
5012 adapter->msg_enable = (1 << NETIF_MSG_DRV | NETIF_MSG_PROBE) - 1;
5014 mmio_start = pci_resource_start(pdev, 0);
5015 mmio_len = pci_resource_len(pdev, 0);
5018 adapter->hw.hw_addr = ioremap(mmio_start, mmio_len);
5019 if (!adapter->hw.hw_addr)
5022 if ((adapter->flags & FLAG_HAS_FLASH) &&
5023 (pci_resource_flags(pdev, 1) & IORESOURCE_MEM)) {
5024 flash_start = pci_resource_start(pdev, 1);
5025 flash_len = pci_resource_len(pdev, 1);
5026 adapter->hw.flash_address = ioremap(flash_start, flash_len);
5027 if (!adapter->hw.flash_address)
5031 /* construct the net_device struct */
5032 netdev->netdev_ops = &e1000e_netdev_ops;
5033 e1000e_set_ethtool_ops(netdev);
5034 netdev->watchdog_timeo = 5 * HZ;
5035 netif_napi_add(netdev, &adapter->napi, e1000_clean, 64);
5036 strncpy(netdev->name, pci_name(pdev), sizeof(netdev->name) - 1);
5038 netdev->mem_start = mmio_start;
5039 netdev->mem_end = mmio_start + mmio_len;
5041 adapter->bd_number = cards_found++;
5043 e1000e_check_options(adapter);
5045 /* setup adapter struct */
5046 err = e1000_sw_init(adapter);
5052 memcpy(&hw->mac.ops, ei->mac_ops, sizeof(hw->mac.ops));
5053 memcpy(&hw->nvm.ops, ei->nvm_ops, sizeof(hw->nvm.ops));
5054 memcpy(&hw->phy.ops, ei->phy_ops, sizeof(hw->phy.ops));
5056 err = ei->get_variants(adapter);
5060 if ((adapter->flags & FLAG_IS_ICH) &&
5061 (adapter->flags & FLAG_READ_ONLY_NVM))
5062 e1000e_write_protect_nvm_ich8lan(&adapter->hw);
5064 hw->mac.ops.get_bus_info(&adapter->hw);
5066 adapter->hw.phy.autoneg_wait_to_complete = 0;
5068 /* Copper options */
5069 if (adapter->hw.phy.media_type == e1000_media_type_copper) {
5070 adapter->hw.phy.mdix = AUTO_ALL_MODES;
5071 adapter->hw.phy.disable_polarity_correction = 0;
5072 adapter->hw.phy.ms_type = e1000_ms_hw_default;
5075 if (e1000_check_reset_block(&adapter->hw))
5076 e_info("PHY reset is blocked due to SOL/IDER session.\n");
5078 netdev->features = NETIF_F_SG |
5080 NETIF_F_HW_VLAN_TX |
5083 if (adapter->flags & FLAG_HAS_HW_VLAN_FILTER)
5084 netdev->features |= NETIF_F_HW_VLAN_FILTER;
5086 netdev->features |= NETIF_F_TSO;
5087 netdev->features |= NETIF_F_TSO6;
5089 netdev->vlan_features |= NETIF_F_TSO;
5090 netdev->vlan_features |= NETIF_F_TSO6;
5091 netdev->vlan_features |= NETIF_F_HW_CSUM;
5092 netdev->vlan_features |= NETIF_F_SG;
5095 netdev->features |= NETIF_F_HIGHDMA;
5097 if (e1000e_enable_mng_pass_thru(&adapter->hw))
5098 adapter->flags |= FLAG_MNG_PT_ENABLED;
5101 * before reading the NVM, reset the controller to
5102 * put the device in a known good starting state
5104 adapter->hw.mac.ops.reset_hw(&adapter->hw);
5107 * systems with ASPM and others may see the checksum fail on the first
5108 * attempt. Let's give it a few tries
5111 if (e1000_validate_nvm_checksum(&adapter->hw) >= 0)
5114 e_err("The NVM Checksum Is Not Valid\n");
5120 e1000_eeprom_checks(adapter);
5122 /* copy the MAC address */
5123 if (e1000e_read_mac_addr(&adapter->hw))
5124 e_err("NVM Read Error while reading MAC address\n");
5126 memcpy(netdev->dev_addr, adapter->hw.mac.addr, netdev->addr_len);
5127 memcpy(netdev->perm_addr, adapter->hw.mac.addr, netdev->addr_len);
5129 if (!is_valid_ether_addr(netdev->perm_addr)) {
5130 e_err("Invalid MAC Address: %pM\n", netdev->perm_addr);
5135 init_timer(&adapter->watchdog_timer);
5136 adapter->watchdog_timer.function = &e1000_watchdog;
5137 adapter->watchdog_timer.data = (unsigned long) adapter;
5139 init_timer(&adapter->phy_info_timer);
5140 adapter->phy_info_timer.function = &e1000_update_phy_info;
5141 adapter->phy_info_timer.data = (unsigned long) adapter;
5143 INIT_WORK(&adapter->reset_task, e1000_reset_task);
5144 INIT_WORK(&adapter->watchdog_task, e1000_watchdog_task);
5145 INIT_WORK(&adapter->downshift_task, e1000e_downshift_workaround);
5146 INIT_WORK(&adapter->update_phy_task, e1000e_update_phy_task);
5147 INIT_WORK(&adapter->print_hang_task, e1000_print_hw_hang);
5149 /* Initialize link parameters. User can change them with ethtool */
5150 adapter->hw.mac.autoneg = 1;
5151 adapter->fc_autoneg = 1;
5152 adapter->hw.fc.requested_mode = e1000_fc_default;
5153 adapter->hw.fc.current_mode = e1000_fc_default;
5154 adapter->hw.phy.autoneg_advertised = 0x2f;
5156 /* ring size defaults */
5157 adapter->rx_ring->count = 256;
5158 adapter->tx_ring->count = 256;
5161 * Initial Wake on LAN setting - If APM wake is enabled in
5162 * the EEPROM, enable the ACPI Magic Packet filter
5164 if (adapter->flags & FLAG_APME_IN_WUC) {
5165 /* APME bit in EEPROM is mapped to WUC.APME */
5166 eeprom_data = er32(WUC);
5167 eeprom_apme_mask = E1000_WUC_APME;
5168 if (eeprom_data & E1000_WUC_PHY_WAKE)
5169 adapter->flags2 |= FLAG2_HAS_PHY_WAKEUP;
5170 } else if (adapter->flags & FLAG_APME_IN_CTRL3) {
5171 if (adapter->flags & FLAG_APME_CHECK_PORT_B &&
5172 (adapter->hw.bus.func == 1))
5173 e1000_read_nvm(&adapter->hw,
5174 NVM_INIT_CONTROL3_PORT_B, 1, &eeprom_data);
5176 e1000_read_nvm(&adapter->hw,
5177 NVM_INIT_CONTROL3_PORT_A, 1, &eeprom_data);
5180 /* fetch WoL from EEPROM */
5181 if (eeprom_data & eeprom_apme_mask)
5182 adapter->eeprom_wol |= E1000_WUFC_MAG;
5185 * now that we have the eeprom settings, apply the special cases
5186 * where the eeprom may be wrong or the board simply won't support
5187 * wake on lan on a particular port
5189 if (!(adapter->flags & FLAG_HAS_WOL))
5190 adapter->eeprom_wol = 0;
5192 /* initialize the wol settings based on the eeprom settings */
5193 adapter->wol = adapter->eeprom_wol;
5194 device_set_wakeup_enable(&adapter->pdev->dev, adapter->wol);
5196 /* save off EEPROM version number */
5197 e1000_read_nvm(&adapter->hw, 5, 1, &adapter->eeprom_vers);
5199 /* reset the hardware with the new settings */
5200 e1000e_reset(adapter);
5203 * If the controller has AMT, do not set DRV_LOAD until the interface
5204 * is up. For all other cases, let the f/w know that the h/w is now
5205 * under the control of the driver.
5207 if (!(adapter->flags & FLAG_HAS_AMT))
5208 e1000_get_hw_control(adapter);
5210 strcpy(netdev->name, "eth%d");
5211 err = register_netdev(netdev);
5215 /* carrier off reporting is important to ethtool even BEFORE open */
5216 netif_carrier_off(netdev);
5218 e1000_print_device_info(adapter);
5223 if (!(adapter->flags & FLAG_HAS_AMT))
5224 e1000_release_hw_control(adapter);
5226 if (!e1000_check_reset_block(&adapter->hw))
5227 e1000_phy_hw_reset(&adapter->hw);
5230 kfree(adapter->tx_ring);
5231 kfree(adapter->rx_ring);
5233 if (adapter->hw.flash_address)
5234 iounmap(adapter->hw.flash_address);
5235 e1000e_reset_interrupt_capability(adapter);
5237 iounmap(adapter->hw.hw_addr);
5239 free_netdev(netdev);
5241 pci_release_selected_regions(pdev,
5242 pci_select_bars(pdev, IORESOURCE_MEM));
5245 pci_disable_device(pdev);
5250 * e1000_remove - Device Removal Routine
5251 * @pdev: PCI device information struct
5253 * e1000_remove is called by the PCI subsystem to alert the driver
5254 * that it should release a PCI device. The could be caused by a
5255 * Hot-Plug event, or because the driver is going to be removed from
5258 static void __devexit e1000_remove(struct pci_dev *pdev)
5260 struct net_device *netdev = pci_get_drvdata(pdev);
5261 struct e1000_adapter *adapter = netdev_priv(netdev);
5264 * flush_scheduled work may reschedule our watchdog task, so
5265 * explicitly disable watchdog tasks from being rescheduled
5267 set_bit(__E1000_DOWN, &adapter->state);
5268 del_timer_sync(&adapter->watchdog_timer);
5269 del_timer_sync(&adapter->phy_info_timer);
5271 cancel_work_sync(&adapter->reset_task);
5272 cancel_work_sync(&adapter->watchdog_task);
5273 cancel_work_sync(&adapter->downshift_task);
5274 cancel_work_sync(&adapter->update_phy_task);
5275 cancel_work_sync(&adapter->print_hang_task);
5276 flush_scheduled_work();
5278 if (!(netdev->flags & IFF_UP))
5279 e1000_power_down_phy(adapter);
5281 unregister_netdev(netdev);
5284 * Release control of h/w to f/w. If f/w is AMT enabled, this
5285 * would have already happened in close and is redundant.
5287 e1000_release_hw_control(adapter);
5289 e1000e_reset_interrupt_capability(adapter);
5290 kfree(adapter->tx_ring);
5291 kfree(adapter->rx_ring);
5293 iounmap(adapter->hw.hw_addr);
5294 if (adapter->hw.flash_address)
5295 iounmap(adapter->hw.flash_address);
5296 pci_release_selected_regions(pdev,
5297 pci_select_bars(pdev, IORESOURCE_MEM));
5299 free_netdev(netdev);
5302 pci_disable_pcie_error_reporting(pdev);
5304 pci_disable_device(pdev);
5307 /* PCI Error Recovery (ERS) */
5308 static struct pci_error_handlers e1000_err_handler = {
5309 .error_detected = e1000_io_error_detected,
5310 .slot_reset = e1000_io_slot_reset,
5311 .resume = e1000_io_resume,
5314 static DEFINE_PCI_DEVICE_TABLE(e1000_pci_tbl) = {
5315 { PCI_VDEVICE(INTEL, E1000_DEV_ID_82571EB_COPPER), board_82571 },
5316 { PCI_VDEVICE(INTEL, E1000_DEV_ID_82571EB_FIBER), board_82571 },
5317 { PCI_VDEVICE(INTEL, E1000_DEV_ID_82571EB_QUAD_COPPER), board_82571 },
5318 { PCI_VDEVICE(INTEL, E1000_DEV_ID_82571EB_QUAD_COPPER_LP), board_82571 },
5319 { PCI_VDEVICE(INTEL, E1000_DEV_ID_82571EB_QUAD_FIBER), board_82571 },
5320 { PCI_VDEVICE(INTEL, E1000_DEV_ID_82571EB_SERDES), board_82571 },
5321 { PCI_VDEVICE(INTEL, E1000_DEV_ID_82571EB_SERDES_DUAL), board_82571 },
5322 { PCI_VDEVICE(INTEL, E1000_DEV_ID_82571EB_SERDES_QUAD), board_82571 },
5323 { PCI_VDEVICE(INTEL, E1000_DEV_ID_82571PT_QUAD_COPPER), board_82571 },
5325 { PCI_VDEVICE(INTEL, E1000_DEV_ID_82572EI), board_82572 },
5326 { PCI_VDEVICE(INTEL, E1000_DEV_ID_82572EI_COPPER), board_82572 },
5327 { PCI_VDEVICE(INTEL, E1000_DEV_ID_82572EI_FIBER), board_82572 },
5328 { PCI_VDEVICE(INTEL, E1000_DEV_ID_82572EI_SERDES), board_82572 },
5330 { PCI_VDEVICE(INTEL, E1000_DEV_ID_82573E), board_82573 },
5331 { PCI_VDEVICE(INTEL, E1000_DEV_ID_82573E_IAMT), board_82573 },
5332 { PCI_VDEVICE(INTEL, E1000_DEV_ID_82573L), board_82573 },
5334 { PCI_VDEVICE(INTEL, E1000_DEV_ID_82574L), board_82574 },
5335 { PCI_VDEVICE(INTEL, E1000_DEV_ID_82574LA), board_82574 },
5336 { PCI_VDEVICE(INTEL, E1000_DEV_ID_82583V), board_82583 },
5338 { PCI_VDEVICE(INTEL, E1000_DEV_ID_80003ES2LAN_COPPER_DPT),
5339 board_80003es2lan },
5340 { PCI_VDEVICE(INTEL, E1000_DEV_ID_80003ES2LAN_COPPER_SPT),
5341 board_80003es2lan },
5342 { PCI_VDEVICE(INTEL, E1000_DEV_ID_80003ES2LAN_SERDES_DPT),
5343 board_80003es2lan },
5344 { PCI_VDEVICE(INTEL, E1000_DEV_ID_80003ES2LAN_SERDES_SPT),
5345 board_80003es2lan },
5347 { PCI_VDEVICE(INTEL, E1000_DEV_ID_ICH8_IFE), board_ich8lan },
5348 { PCI_VDEVICE(INTEL, E1000_DEV_ID_ICH8_IFE_G), board_ich8lan },
5349 { PCI_VDEVICE(INTEL, E1000_DEV_ID_ICH8_IFE_GT), board_ich8lan },
5350 { PCI_VDEVICE(INTEL, E1000_DEV_ID_ICH8_IGP_AMT), board_ich8lan },
5351 { PCI_VDEVICE(INTEL, E1000_DEV_ID_ICH8_IGP_C), board_ich8lan },
5352 { PCI_VDEVICE(INTEL, E1000_DEV_ID_ICH8_IGP_M), board_ich8lan },
5353 { PCI_VDEVICE(INTEL, E1000_DEV_ID_ICH8_IGP_M_AMT), board_ich8lan },
5354 { PCI_VDEVICE(INTEL, E1000_DEV_ID_ICH8_82567V_3), board_ich8lan },
5356 { PCI_VDEVICE(INTEL, E1000_DEV_ID_ICH9_IFE), board_ich9lan },
5357 { PCI_VDEVICE(INTEL, E1000_DEV_ID_ICH9_IFE_G), board_ich9lan },
5358 { PCI_VDEVICE(INTEL, E1000_DEV_ID_ICH9_IFE_GT), board_ich9lan },
5359 { PCI_VDEVICE(INTEL, E1000_DEV_ID_ICH9_IGP_AMT), board_ich9lan },
5360 { PCI_VDEVICE(INTEL, E1000_DEV_ID_ICH9_IGP_C), board_ich9lan },
5361 { PCI_VDEVICE(INTEL, E1000_DEV_ID_ICH9_BM), board_ich9lan },
5362 { PCI_VDEVICE(INTEL, E1000_DEV_ID_ICH9_IGP_M), board_ich9lan },
5363 { PCI_VDEVICE(INTEL, E1000_DEV_ID_ICH9_IGP_M_AMT), board_ich9lan },
5364 { PCI_VDEVICE(INTEL, E1000_DEV_ID_ICH9_IGP_M_V), board_ich9lan },
5366 { PCI_VDEVICE(INTEL, E1000_DEV_ID_ICH10_R_BM_LM), board_ich9lan },
5367 { PCI_VDEVICE(INTEL, E1000_DEV_ID_ICH10_R_BM_LF), board_ich9lan },
5368 { PCI_VDEVICE(INTEL, E1000_DEV_ID_ICH10_R_BM_V), board_ich9lan },
5370 { PCI_VDEVICE(INTEL, E1000_DEV_ID_ICH10_D_BM_LM), board_ich10lan },
5371 { PCI_VDEVICE(INTEL, E1000_DEV_ID_ICH10_D_BM_LF), board_ich10lan },
5373 { PCI_VDEVICE(INTEL, E1000_DEV_ID_PCH_M_HV_LM), board_pchlan },
5374 { PCI_VDEVICE(INTEL, E1000_DEV_ID_PCH_M_HV_LC), board_pchlan },
5375 { PCI_VDEVICE(INTEL, E1000_DEV_ID_PCH_D_HV_DM), board_pchlan },
5376 { PCI_VDEVICE(INTEL, E1000_DEV_ID_PCH_D_HV_DC), board_pchlan },
5378 { } /* terminate list */
5380 MODULE_DEVICE_TABLE(pci, e1000_pci_tbl);
5382 /* PCI Device API Driver */
5383 static struct pci_driver e1000_driver = {
5384 .name = e1000e_driver_name,
5385 .id_table = e1000_pci_tbl,
5386 .probe = e1000_probe,
5387 .remove = __devexit_p(e1000_remove),
5389 /* Power Management Hooks */
5390 .suspend = e1000_suspend,
5391 .resume = e1000_resume,
5393 .shutdown = e1000_shutdown,
5394 .err_handler = &e1000_err_handler
5398 * e1000_init_module - Driver Registration Routine
5400 * e1000_init_module is the first routine called when the driver is
5401 * loaded. All it does is register with the PCI subsystem.
5403 static int __init e1000_init_module(void)
5406 printk(KERN_INFO "%s: Intel(R) PRO/1000 Network Driver - %s\n",
5407 e1000e_driver_name, e1000e_driver_version);
5408 printk(KERN_INFO "%s: Copyright (c) 1999 - 2009 Intel Corporation.\n",
5409 e1000e_driver_name);
5410 ret = pci_register_driver(&e1000_driver);
5414 module_init(e1000_init_module);
5417 * e1000_exit_module - Driver Exit Cleanup Routine
5419 * e1000_exit_module is called just before the driver is removed
5422 static void __exit e1000_exit_module(void)
5424 pci_unregister_driver(&e1000_driver);
5426 module_exit(e1000_exit_module);
5429 MODULE_AUTHOR("Intel Corporation, <linux.nics@intel.com>");
5430 MODULE_DESCRIPTION("Intel(R) PRO/1000 Network Driver");
5431 MODULE_LICENSE("GPL");
5432 MODULE_VERSION(DRV_VERSION);