drivers/net/dsa/microchip/ksz9477.c

   1 // SPDX-License-Identifier: GPL-2.0
   2 /*
   3  * Microchip KSZ9477 switch driver main logic
   4  *
   5  * Copyright (C) 2017-2019 Microchip Technology Inc.
   6  */
   7
   8 #include <linux/kernel.h>
   9 #include <linux/module.h>
  10 #include <linux/iopoll.h>
  11 #include <linux/platform_data/microchip-ksz.h>
  12 #include <linux/phy.h>
  13 #include <linux/if_bridge.h>
  14 #include <net/dsa.h>
  15 #include <net/switchdev.h>
  16
  17 #include "ksz_priv.h"
  18 #include "ksz9477_reg.h"
  19 #include "ksz_common.h"
  20
  21 /* Used with variable features to indicate capabilities. */
  22 #define GBIT_SUPPORT                    BIT(0)
  23 #define NEW_XMII                        BIT(1)
  24 #define IS_9893                         BIT(2)
  25
  26 static const struct {
  27         int index;
  28         char string[ETH_GSTRING_LEN];
  29 } ksz9477_mib_names[TOTAL_SWITCH_COUNTER_NUM] = {
  30         { 0x00, "rx_hi" },
  31         { 0x01, "rx_undersize" },
  32         { 0x02, "rx_fragments" },
  33         { 0x03, "rx_oversize" },
  34         { 0x04, "rx_jabbers" },
  35         { 0x05, "rx_symbol_err" },
  36         { 0x06, "rx_crc_err" },
  37         { 0x07, "rx_align_err" },
  38         { 0x08, "rx_mac_ctrl" },
  39         { 0x09, "rx_pause" },
  40         { 0x0A, "rx_bcast" },
  41         { 0x0B, "rx_mcast" },
  42         { 0x0C, "rx_ucast" },
  43         { 0x0D, "rx_64_or_less" },
  44         { 0x0E, "rx_65_127" },
  45         { 0x0F, "rx_128_255" },
  46         { 0x10, "rx_256_511" },
  47         { 0x11, "rx_512_1023" },
  48         { 0x12, "rx_1024_1522" },
  49         { 0x13, "rx_1523_2000" },
  50         { 0x14, "rx_2001" },
  51         { 0x15, "tx_hi" },
  52         { 0x16, "tx_late_col" },
  53         { 0x17, "tx_pause" },
  54         { 0x18, "tx_bcast" },
  55         { 0x19, "tx_mcast" },
  56         { 0x1A, "tx_ucast" },
  57         { 0x1B, "tx_deferred" },
  58         { 0x1C, "tx_total_col" },
  59         { 0x1D, "tx_exc_col" },
  60         { 0x1E, "tx_single_col" },
  61         { 0x1F, "tx_mult_col" },
  62         { 0x80, "rx_total" },
  63         { 0x81, "tx_total" },
  64         { 0x82, "rx_discards" },
  65         { 0x83, "tx_discards" },
  66 };
  67
  68 static void ksz9477_cfg32(struct ksz_device *dev, u32 addr, u32 bits, bool set)
  69 {
  70         u32 data;
  71
  72         ksz_read32(dev, addr, &data);
  73         if (set)
  74                 data |= bits;
  75         else
  76                 data &= ~bits;
  77         ksz_write32(dev, addr, data);
  78 }
  79
  80 static void ksz9477_port_cfg32(struct ksz_device *dev, int port, int offset,
  81                                u32 bits, bool set)
  82 {
  83         u32 addr;
  84         u32 data;
  85
  86         addr = PORT_CTRL_ADDR(port, offset);
  87         ksz_read32(dev, addr, &data);
  88
  89         if (set)
  90                 data |= bits;
  91         else
  92                 data &= ~bits;
  93
  94         ksz_write32(dev, addr, data);
  95 }
  96
  97 static int ksz9477_wait_vlan_ctrl_ready(struct ksz_device *dev, u32 waiton,
  98                                         int timeout)
  99 {
 100         u8 data;
 101
 102         do {
 103                 ksz_read8(dev, REG_SW_VLAN_CTRL, &data);
 104                 if (!(data & waiton))
 105                         break;
 106                 usleep_range(1, 10);
 107         } while (timeout-- > 0);
 108
 109         if (timeout <= 0)
 110                 return -ETIMEDOUT;
 111
 112         return 0;
 113 }
 114
 115 static int ksz9477_get_vlan_table(struct ksz_device *dev, u16 vid,
 116                                   u32 *vlan_table)
 117 {
 118         int ret;
 119
 120         mutex_lock(&dev->vlan_mutex);
 121
 122         ksz_write16(dev, REG_SW_VLAN_ENTRY_INDEX__2, vid & VLAN_INDEX_M);
 123         ksz_write8(dev, REG_SW_VLAN_CTRL, VLAN_READ | VLAN_START);
 124
 125         /* wait to be cleared */
 126         ret = ksz9477_wait_vlan_ctrl_ready(dev, VLAN_START, 1000);
 127         if (ret < 0) {
 128                 dev_dbg(dev->dev, "Failed to read vlan table\n");
 129                 goto exit;
 130         }
 131
 132         ksz_read32(dev, REG_SW_VLAN_ENTRY__4, &vlan_table[0]);
 133         ksz_read32(dev, REG_SW_VLAN_ENTRY_UNTAG__4, &vlan_table[1]);
 134         ksz_read32(dev, REG_SW_VLAN_ENTRY_PORTS__4, &vlan_table[2]);
 135
 136         ksz_write8(dev, REG_SW_VLAN_CTRL, 0);
 137
 138 exit:
 139         mutex_unlock(&dev->vlan_mutex);
 140
 141         return ret;
 142 }
 143
 144 static int ksz9477_set_vlan_table(struct ksz_device *dev, u16 vid,
 145                                   u32 *vlan_table)
 146 {
 147         int ret;
 148
 149         mutex_lock(&dev->vlan_mutex);
 150
 151         ksz_write32(dev, REG_SW_VLAN_ENTRY__4, vlan_table[0]);
 152         ksz_write32(dev, REG_SW_VLAN_ENTRY_UNTAG__4, vlan_table[1]);
 153         ksz_write32(dev, REG_SW_VLAN_ENTRY_PORTS__4, vlan_table[2]);
 154
 155         ksz_write16(dev, REG_SW_VLAN_ENTRY_INDEX__2, vid & VLAN_INDEX_M);
 156         ksz_write8(dev, REG_SW_VLAN_CTRL, VLAN_START | VLAN_WRITE);
 157
 158         /* wait to be cleared */
 159         ret = ksz9477_wait_vlan_ctrl_ready(dev, VLAN_START, 1000);
 160         if (ret < 0) {
 161                 dev_dbg(dev->dev, "Failed to write vlan table\n");
 162                 goto exit;
 163         }
 164
 165         ksz_write8(dev, REG_SW_VLAN_CTRL, 0);
 166
 167         /* update vlan cache table */
 168         dev->vlan_cache[vid].table[0] = vlan_table[0];
 169         dev->vlan_cache[vid].table[1] = vlan_table[1];
 170         dev->vlan_cache[vid].table[2] = vlan_table[2];
 171
 172 exit:
 173         mutex_unlock(&dev->vlan_mutex);
 174
 175         return ret;
 176 }
 177
 178 static void ksz9477_read_table(struct ksz_device *dev, u32 *table)
 179 {
 180         ksz_read32(dev, REG_SW_ALU_VAL_A, &table[0]);
 181         ksz_read32(dev, REG_SW_ALU_VAL_B, &table[1]);
 182         ksz_read32(dev, REG_SW_ALU_VAL_C, &table[2]);
 183         ksz_read32(dev, REG_SW_ALU_VAL_D, &table[3]);
 184 }
 185
 186 static void ksz9477_write_table(struct ksz_device *dev, u32 *table)
 187 {
 188         ksz_write32(dev, REG_SW_ALU_VAL_A, table[0]);
 189         ksz_write32(dev, REG_SW_ALU_VAL_B, table[1]);
 190         ksz_write32(dev, REG_SW_ALU_VAL_C, table[2]);
 191         ksz_write32(dev, REG_SW_ALU_VAL_D, table[3]);
 192 }
 193
 194 static int ksz9477_wait_alu_ready(struct ksz_device *dev, u32 waiton,
 195                                   int timeout)
 196 {
 197         u32 data;
 198
 199         do {
 200                 ksz_read32(dev, REG_SW_ALU_CTRL__4, &data);
 201                 if (!(data & waiton))
 202                         break;
 203                 usleep_range(1, 10);
 204         } while (timeout-- > 0);
 205
 206         if (timeout <= 0)
 207                 return -ETIMEDOUT;
 208
 209         return 0;
 210 }
 211
 212 static int ksz9477_wait_alu_sta_ready(struct ksz_device *dev, u32 waiton,
 213                                       int timeout)
 214 {
 215         u32 data;
 216
 217         do {
 218                 ksz_read32(dev, REG_SW_ALU_STAT_CTRL__4, &data);
 219                 if (!(data & waiton))
 220                         break;
 221                 usleep_range(1, 10);
 222         } while (timeout-- > 0);
 223
 224         if (timeout <= 0)
 225                 return -ETIMEDOUT;
 226
 227         return 0;
 228 }
 229
 230 static int ksz9477_reset_switch(struct ksz_device *dev)
 231 {
 232         u8 data8;
 233         u16 data16;
 234         u32 data32;
 235
 236         /* reset switch */
 237         ksz_cfg(dev, REG_SW_OPERATION, SW_RESET, true);
 238
 239         /* turn off SPI DO Edge select */
 240         ksz_read8(dev, REG_SW_GLOBAL_SERIAL_CTRL_0, &data8);
 241         data8 &= ~SPI_AUTO_EDGE_DETECTION;
 242         ksz_write8(dev, REG_SW_GLOBAL_SERIAL_CTRL_0, data8);
 243
 244         /* default configuration */
 245         ksz_read8(dev, REG_SW_LUE_CTRL_1, &data8);
 246         data8 = SW_AGING_ENABLE | SW_LINK_AUTO_AGING |
 247               SW_SRC_ADDR_FILTER | SW_FLUSH_STP_TABLE | SW_FLUSH_MSTP_TABLE;
 248         ksz_write8(dev, REG_SW_LUE_CTRL_1, data8);
 249
 250         /* disable interrupts */
 251         ksz_write32(dev, REG_SW_INT_MASK__4, SWITCH_INT_MASK);
 252         ksz_write32(dev, REG_SW_PORT_INT_MASK__4, 0x7F);
 253         ksz_read32(dev, REG_SW_PORT_INT_STATUS__4, &data32);
 254
 255         /* set broadcast storm protection 10% rate */
 256         ksz_read16(dev, REG_SW_MAC_CTRL_2, &data16);
 257         data16 &= ~BROADCAST_STORM_RATE;
 258         data16 |= (BROADCAST_STORM_VALUE * BROADCAST_STORM_PROT_RATE) / 100;
 259         ksz_write16(dev, REG_SW_MAC_CTRL_2, data16);
 260
 261         return 0;
 262 }
 263
 264 static void ksz9477_r_mib_cnt(struct ksz_device *dev, int port, u16 addr,
 265                               u64 *cnt)
 266 {
 267         struct ksz_poll_ctx ctx = {
 268                 .dev = dev,
 269                 .port = port,
 270                 .offset = REG_PORT_MIB_CTRL_STAT__4,
 271         };
 272         struct ksz_port *p = &dev->ports[port];
 273         u32 data;
 274         int ret;
 275
 276         /* retain the flush/freeze bit */
 277         data = p->freeze ? MIB_COUNTER_FLUSH_FREEZE : 0;
 278         data |= MIB_COUNTER_READ;
 279         data |= (addr << MIB_COUNTER_INDEX_S);
 280         ksz_pwrite32(dev, port, REG_PORT_MIB_CTRL_STAT__4, data);
 281
 282         ret = readx_poll_timeout(ksz_pread32_poll, &ctx, data,
 283                                  !(data & MIB_COUNTER_READ), 10, 1000);
 284
 285         /* failed to read MIB. get out of loop */
 286         if (ret < 0) {
 287                 dev_dbg(dev->dev, "Failed to get MIB\n");
 288                 return;
 289         }
 290
 291         /* count resets upon read */
 292         ksz_pread32(dev, port, REG_PORT_MIB_DATA, &data);
 293         *cnt += data;
 294 }
 295
 296 static void ksz9477_r_mib_pkt(struct ksz_device *dev, int port, u16 addr,
 297                               u64 *dropped, u64 *cnt)
 298 {
 299         addr = ksz9477_mib_names[addr].index;
 300         ksz9477_r_mib_cnt(dev, port, addr, cnt);
 301 }
 302
 303 static void ksz9477_freeze_mib(struct ksz_device *dev, int port, bool freeze)
 304 {
 305         u32 val = freeze ? MIB_COUNTER_FLUSH_FREEZE : 0;
 306         struct ksz_port *p = &dev->ports[port];
 307
 308         /* enable/disable the port for flush/freeze function */
 309         mutex_lock(&p->mib.cnt_mutex);
 310         ksz_pwrite32(dev, port, REG_PORT_MIB_CTRL_STAT__4, val);
 311
 312         /* used by MIB counter reading code to know freeze is enabled */
 313         p->freeze = freeze;
 314         mutex_unlock(&p->mib.cnt_mutex);
 315 }
 316
 317 static void ksz9477_port_init_cnt(struct ksz_device *dev, int port)
 318 {
 319         struct ksz_port_mib *mib = &dev->ports[port].mib;
 320
 321         /* flush all enabled port MIB counters */
 322         mutex_lock(&mib->cnt_mutex);
 323         ksz_pwrite32(dev, port, REG_PORT_MIB_CTRL_STAT__4,
 324                      MIB_COUNTER_FLUSH_FREEZE);
 325         ksz_write8(dev, REG_SW_MAC_CTRL_6, SW_MIB_COUNTER_FLUSH);
 326         ksz_pwrite32(dev, port, REG_PORT_MIB_CTRL_STAT__4, 0);
 327         mutex_unlock(&mib->cnt_mutex);
 328
 329         mib->cnt_ptr = 0;
 330         memset(mib->counters, 0, dev->mib_cnt * sizeof(u64));
 331 }
 332
 333 static enum dsa_tag_protocol ksz9477_get_tag_protocol(struct dsa_switch *ds,
 334                                                       int port)
 335 {
 336         enum dsa_tag_protocol proto = DSA_TAG_PROTO_KSZ9477;
 337         struct ksz_device *dev = ds->priv;
 338
 339         if (dev->features & IS_9893)
 340                 proto = DSA_TAG_PROTO_KSZ9893;
 341         return proto;
 342 }
 343
 344 static int ksz9477_phy_read16(struct dsa_switch *ds, int addr, int reg)
 345 {
 346         struct ksz_device *dev = ds->priv;
 347         u16 val = 0xffff;
 348
 349         /* No real PHY after this. Simulate the PHY.
 350          * A fixed PHY can be setup in the device tree, but this function is
 351          * still called for that port during initialization.
 352          * For RGMII PHY there is no way to access it so the fixed PHY should
 353          * be used.  For SGMII PHY the supporting code will be added later.
 354          */
 355         if (addr >= dev->phy_port_cnt) {
 356                 struct ksz_port *p = &dev->ports[addr];
 357
 358                 switch (reg) {
 359                 case MII_BMCR:
 360                         val = 0x1140;
 361                         break;
 362                 case MII_BMSR:
 363                         val = 0x796d;
 364                         break;
 365                 case MII_PHYSID1:
 366                         val = 0x0022;
 367                         break;
 368                 case MII_PHYSID2:
 369                         val = 0x1631;
 370                         break;
 371                 case MII_ADVERTISE:
 372                         val = 0x05e1;
 373                         break;
 374                 case MII_LPA:
 375                         val = 0xc5e1;
 376                         break;
 377                 case MII_CTRL1000:
 378                         val = 0x0700;
 379                         break;
 380                 case MII_STAT1000:
 381                         if (p->phydev.speed == SPEED_1000)
 382                                 val = 0x3800;
 383                         else
 384                                 val = 0;
 385                         break;
 386                 }
 387         } else {
 388                 ksz_pread16(dev, addr, 0x100 + (reg << 1), &val);
 389         }
 390
 391         return val;
 392 }
 393
 394 static int ksz9477_phy_write16(struct dsa_switch *ds, int addr, int reg,
 395                                u16 val)
 396 {
 397         struct ksz_device *dev = ds->priv;
 398
 399         /* No real PHY after this. */
 400         if (addr >= dev->phy_port_cnt)
 401                 return 0;
 402
 403         /* No gigabit support.  Do not write to this register. */
 404         if (!(dev->features & GBIT_SUPPORT) && reg == MII_CTRL1000)
 405                 return 0;
 406         ksz_pwrite16(dev, addr, 0x100 + (reg << 1), val);
 407
 408         return 0;
 409 }
 410
 411 static void ksz9477_get_strings(struct dsa_switch *ds, int port,
 412                                 u32 stringset, uint8_t *buf)
 413 {
 414         int i;
 415
 416         if (stringset != ETH_SS_STATS)
 417                 return;
 418
 419         for (i = 0; i < TOTAL_SWITCH_COUNTER_NUM; i++) {
 420                 memcpy(buf + i * ETH_GSTRING_LEN, ksz9477_mib_names[i].string,
 421                        ETH_GSTRING_LEN);
 422         }
 423 }
 424
 425 static void ksz9477_cfg_port_member(struct ksz_device *dev, int port,
 426                                     u8 member)
 427 {
 428         ksz_pwrite32(dev, port, REG_PORT_VLAN_MEMBERSHIP__4, member);
 429         dev->ports[port].member = member;
 430 }
 431
 432 static void ksz9477_port_stp_state_set(struct dsa_switch *ds, int port,
 433                                        u8 state)
 434 {
 435         struct ksz_device *dev = ds->priv;
 436         struct ksz_port *p = &dev->ports[port];
 437         u8 data;
 438         int member = -1;
 439         int forward = dev->member;
 440
 441         ksz_pread8(dev, port, P_STP_CTRL, &data);
 442         data &= ~(PORT_TX_ENABLE | PORT_RX_ENABLE | PORT_LEARN_DISABLE);
 443
 444         switch (state) {
 445         case BR_STATE_DISABLED:
 446                 data |= PORT_LEARN_DISABLE;
 447                 if (port != dev->cpu_port)
 448                         member = 0;
 449                 break;
 450         case BR_STATE_LISTENING:
 451                 data |= (PORT_RX_ENABLE | PORT_LEARN_DISABLE);
 452                 if (port != dev->cpu_port &&
 453                     p->stp_state == BR_STATE_DISABLED)
 454                         member = dev->host_mask | p->vid_member;
 455                 break;
 456         case BR_STATE_LEARNING:
 457                 data |= PORT_RX_ENABLE;
 458                 break;
 459         case BR_STATE_FORWARDING:
 460                 data |= (PORT_TX_ENABLE | PORT_RX_ENABLE);
 461
 462                 /* This function is also used internally. */
 463                 if (port == dev->cpu_port)
 464                         break;
 465
 466                 member = dev->host_mask | p->vid_member;
 467                 mutex_lock(&dev->dev_mutex);
 468
 469                 /* Port is a member of a bridge. */
 470                 if (dev->br_member & (1 << port)) {
 471                         dev->member |= (1 << port);
 472                         member = dev->member;
 473                 }
 474                 mutex_unlock(&dev->dev_mutex);
 475                 break;
 476         case BR_STATE_BLOCKING:
 477                 data |= PORT_LEARN_DISABLE;
 478                 if (port != dev->cpu_port &&
 479                     p->stp_state == BR_STATE_DISABLED)
 480                         member = dev->host_mask | p->vid_member;
 481                 break;
 482         default:
 483                 dev_err(ds->dev, "invalid STP state: %d\n", state);
 484                 return;
 485         }
 486
 487         ksz_pwrite8(dev, port, P_STP_CTRL, data);
 488         p->stp_state = state;
 489         mutex_lock(&dev->dev_mutex);
 490         if (data & PORT_RX_ENABLE)
 491                 dev->rx_ports |= (1 << port);
 492         else
 493                 dev->rx_ports &= ~(1 << port);
 494         if (data & PORT_TX_ENABLE)
 495                 dev->tx_ports |= (1 << port);
 496         else
 497                 dev->tx_ports &= ~(1 << port);
 498
 499         /* Port membership may share register with STP state. */
 500         if (member >= 0 && member != p->member)
 501                 ksz9477_cfg_port_member(dev, port, (u8)member);
 502
 503         /* Check if forwarding needs to be updated. */
 504         if (state != BR_STATE_FORWARDING) {
 505                 if (dev->br_member & (1 << port))
 506                         dev->member &= ~(1 << port);
 507         }
 508
 509         /* When topology has changed the function ksz_update_port_member
 510          * should be called to modify port forwarding behavior.
 511          */
 512         if (forward != dev->member)
 513                 ksz_update_port_member(dev, port);
 514         mutex_unlock(&dev->dev_mutex);
 515 }
 516
 517 static void ksz9477_flush_dyn_mac_table(struct ksz_device *dev, int port)
 518 {
 519         u8 data;
 520
 521         ksz_read8(dev, REG_SW_LUE_CTRL_2, &data);
 522         data &= ~(SW_FLUSH_OPTION_M << SW_FLUSH_OPTION_S);
 523         data |= (SW_FLUSH_OPTION_DYN_MAC << SW_FLUSH_OPTION_S);
 524         ksz_write8(dev, REG_SW_LUE_CTRL_2, data);
 525         if (port < dev->mib_port_cnt) {
 526                 /* flush individual port */
 527                 ksz_pread8(dev, port, P_STP_CTRL, &data);
 528                 if (!(data & PORT_LEARN_DISABLE))
 529                         ksz_pwrite8(dev, port, P_STP_CTRL,
 530                                     data | PORT_LEARN_DISABLE);
 531                 ksz_cfg(dev, S_FLUSH_TABLE_CTRL, SW_FLUSH_DYN_MAC_TABLE, true);
 532                 ksz_pwrite8(dev, port, P_STP_CTRL, data);
 533         } else {
 534                 /* flush all */
 535                 ksz_cfg(dev, S_FLUSH_TABLE_CTRL, SW_FLUSH_STP_TABLE, true);
 536         }
 537 }
 538
 539 static int ksz9477_port_vlan_filtering(struct dsa_switch *ds, int port,
 540                                        bool flag)
 541 {
 542         struct ksz_device *dev = ds->priv;
 543
 544         if (flag) {
 545                 ksz_port_cfg(dev, port, REG_PORT_LUE_CTRL,
 546                              PORT_VLAN_LOOKUP_VID_0, true);
 547                 ksz_cfg(dev, REG_SW_LUE_CTRL_0, SW_VLAN_ENABLE, true);
 548         } else {
 549                 ksz_cfg(dev, REG_SW_LUE_CTRL_0, SW_VLAN_ENABLE, false);
 550                 ksz_port_cfg(dev, port, REG_PORT_LUE_CTRL,
 551                              PORT_VLAN_LOOKUP_VID_0, false);
 552         }
 553
 554         return 0;
 555 }
 556
 557 static void ksz9477_port_vlan_add(struct dsa_switch *ds, int port,
 558                                   const struct switchdev_obj_port_vlan *vlan)
 559 {
 560         struct ksz_device *dev = ds->priv;
 561         u32 vlan_table[3];
 562         u16 vid;
 563         bool untagged = vlan->flags & BRIDGE_VLAN_INFO_UNTAGGED;
 564
 565         for (vid = vlan->vid_begin; vid <= vlan->vid_end; vid++) {
 566                 if (ksz9477_get_vlan_table(dev, vid, vlan_table)) {
 567                         dev_dbg(dev->dev, "Failed to get vlan table\n");
 568                         return;
 569                 }
 570
 571                 vlan_table[0] = VLAN_VALID | (vid & VLAN_FID_M);
 572                 if (untagged)
 573                         vlan_table[1] |= BIT(port);
 574                 else
 575                         vlan_table[1] &= ~BIT(port);
 576                 vlan_table[1] &= ~(BIT(dev->cpu_port));
 577
 578                 vlan_table[2] |= BIT(port) | BIT(dev->cpu_port);
 579
 580                 if (ksz9477_set_vlan_table(dev, vid, vlan_table)) {
 581                         dev_dbg(dev->dev, "Failed to set vlan table\n");
 582                         return;
 583                 }
 584
 585                 /* change PVID */
 586                 if (vlan->flags & BRIDGE_VLAN_INFO_PVID)
 587                         ksz_pwrite16(dev, port, REG_PORT_DEFAULT_VID, vid);
 588         }
 589 }
 590
 591 static int ksz9477_port_vlan_del(struct dsa_switch *ds, int port,
 592                                  const struct switchdev_obj_port_vlan *vlan)
 593 {
 594         struct ksz_device *dev = ds->priv;
 595         bool untagged = vlan->flags & BRIDGE_VLAN_INFO_UNTAGGED;
 596         u32 vlan_table[3];
 597         u16 vid;
 598         u16 pvid;
 599
 600         ksz_pread16(dev, port, REG_PORT_DEFAULT_VID, &pvid);
 601         pvid = pvid & 0xFFF;
 602
 603         for (vid = vlan->vid_begin; vid <= vlan->vid_end; vid++) {
 604                 if (ksz9477_get_vlan_table(dev, vid, vlan_table)) {
 605                         dev_dbg(dev->dev, "Failed to get vlan table\n");
 606                         return -ETIMEDOUT;
 607                 }
 608
 609                 vlan_table[2] &= ~BIT(port);
 610
 611                 if (pvid == vid)
 612                         pvid = 1;
 613
 614                 if (untagged)
 615                         vlan_table[1] &= ~BIT(port);
 616
 617                 if (ksz9477_set_vlan_table(dev, vid, vlan_table)) {
 618                         dev_dbg(dev->dev, "Failed to set vlan table\n");
 619                         return -ETIMEDOUT;
 620                 }
 621         }
 622
 623         ksz_pwrite16(dev, port, REG_PORT_DEFAULT_VID, pvid);
 624
 625         return 0;
 626 }
 627
 628 static int ksz9477_port_fdb_add(struct dsa_switch *ds, int port,
 629                                 const unsigned char *addr, u16 vid)
 630 {
 631         struct ksz_device *dev = ds->priv;
 632         u32 alu_table[4];
 633         u32 data;
 634         int ret = 0;
 635
 636         mutex_lock(&dev->alu_mutex);
 637
 638         /* find any entry with mac & vid */
 639         data = vid << ALU_FID_INDEX_S;
 640         data |= ((addr[0] << 8) | addr[1]);
 641         ksz_write32(dev, REG_SW_ALU_INDEX_0, data);
 642
 643         data = ((addr[2] << 24) | (addr[3] << 16));
 644         data |= ((addr[4] << 8) | addr[5]);
 645         ksz_write32(dev, REG_SW_ALU_INDEX_1, data);
 646
 647         /* start read operation */
 648         ksz_write32(dev, REG_SW_ALU_CTRL__4, ALU_READ | ALU_START);
 649
 650         /* wait to be finished */
 651         ret = ksz9477_wait_alu_ready(dev, ALU_START, 1000);
 652         if (ret < 0) {
 653                 dev_dbg(dev->dev, "Failed to read ALU\n");
 654                 goto exit;
 655         }
 656
 657         /* read ALU entry */
 658         ksz9477_read_table(dev, alu_table);
 659
 660         /* update ALU entry */
 661         alu_table[0] = ALU_V_STATIC_VALID;
 662         alu_table[1] |= BIT(port);
 663         if (vid)
 664                 alu_table[1] |= ALU_V_USE_FID;
 665         alu_table[2] = (vid << ALU_V_FID_S);
 666         alu_table[2] |= ((addr[0] << 8) | addr[1]);
 667         alu_table[3] = ((addr[2] << 24) | (addr[3] << 16));
 668         alu_table[3] |= ((addr[4] << 8) | addr[5]);
 669
 670         ksz9477_write_table(dev, alu_table);
 671
 672         ksz_write32(dev, REG_SW_ALU_CTRL__4, ALU_WRITE | ALU_START);
 673
 674         /* wait to be finished */
 675         ret = ksz9477_wait_alu_ready(dev, ALU_START, 1000);
 676         if (ret < 0)
 677                 dev_dbg(dev->dev, "Failed to write ALU\n");
 678
 679 exit:
 680         mutex_unlock(&dev->alu_mutex);
 681
 682         return ret;
 683 }
 684
 685 static int ksz9477_port_fdb_del(struct dsa_switch *ds, int port,
 686                                 const unsigned char *addr, u16 vid)
 687 {
 688         struct ksz_device *dev = ds->priv;
 689         u32 alu_table[4];
 690         u32 data;
 691         int ret = 0;
 692
 693         mutex_lock(&dev->alu_mutex);
 694
 695         /* read any entry with mac & vid */
 696         data = vid << ALU_FID_INDEX_S;
 697         data |= ((addr[0] << 8) | addr[1]);
 698         ksz_write32(dev, REG_SW_ALU_INDEX_0, data);
 699
 700         data = ((addr[2] << 24) | (addr[3] << 16));
 701         data |= ((addr[4] << 8) | addr[5]);
 702         ksz_write32(dev, REG_SW_ALU_INDEX_1, data);
 703
 704         /* start read operation */
 705         ksz_write32(dev, REG_SW_ALU_CTRL__4, ALU_READ | ALU_START);
 706
 707         /* wait to be finished */
 708         ret = ksz9477_wait_alu_ready(dev, ALU_START, 1000);
 709         if (ret < 0) {
 710                 dev_dbg(dev->dev, "Failed to read ALU\n");
 711                 goto exit;
 712         }
 713
 714         ksz_read32(dev, REG_SW_ALU_VAL_A, &alu_table[0]);
 715         if (alu_table[0] & ALU_V_STATIC_VALID) {
 716                 ksz_read32(dev, REG_SW_ALU_VAL_B, &alu_table[1]);
 717                 ksz_read32(dev, REG_SW_ALU_VAL_C, &alu_table[2]);
 718                 ksz_read32(dev, REG_SW_ALU_VAL_D, &alu_table[3]);
 719
 720                 /* clear forwarding port */
 721                 alu_table[2] &= ~BIT(port);
 722
 723                 /* if there is no port to forward, clear table */
 724                 if ((alu_table[2] & ALU_V_PORT_MAP) == 0) {
 725                         alu_table[0] = 0;
 726                         alu_table[1] = 0;
 727                         alu_table[2] = 0;
 728                         alu_table[3] = 0;
 729                 }
 730         } else {
 731                 alu_table[0] = 0;
 732                 alu_table[1] = 0;
 733                 alu_table[2] = 0;
 734                 alu_table[3] = 0;
 735         }
 736
 737         ksz9477_write_table(dev, alu_table);
 738
 739         ksz_write32(dev, REG_SW_ALU_CTRL__4, ALU_WRITE | ALU_START);
 740
 741         /* wait to be finished */
 742         ret = ksz9477_wait_alu_ready(dev, ALU_START, 1000);
 743         if (ret < 0)
 744                 dev_dbg(dev->dev, "Failed to write ALU\n");
 745
 746 exit:
 747         mutex_unlock(&dev->alu_mutex);
 748
 749         return ret;
 750 }
 751
 752 static void ksz9477_convert_alu(struct alu_struct *alu, u32 *alu_table)
 753 {
 754         alu->is_static = !!(alu_table[0] & ALU_V_STATIC_VALID);
 755         alu->is_src_filter = !!(alu_table[0] & ALU_V_SRC_FILTER);
 756         alu->is_dst_filter = !!(alu_table[0] & ALU_V_DST_FILTER);
 757         alu->prio_age = (alu_table[0] >> ALU_V_PRIO_AGE_CNT_S) &
 758                         ALU_V_PRIO_AGE_CNT_M;
 759         alu->mstp = alu_table[0] & ALU_V_MSTP_M;
 760
 761         alu->is_override = !!(alu_table[1] & ALU_V_OVERRIDE);
 762         alu->is_use_fid = !!(alu_table[1] & ALU_V_USE_FID);
 763         alu->port_forward = alu_table[1] & ALU_V_PORT_MAP;
 764
 765         alu->fid = (alu_table[2] >> ALU_V_FID_S) & ALU_V_FID_M;
 766
 767         alu->mac[0] = (alu_table[2] >> 8) & 0xFF;
 768         alu->mac[1] = alu_table[2] & 0xFF;
 769         alu->mac[2] = (alu_table[3] >> 24) & 0xFF;
 770         alu->mac[3] = (alu_table[3] >> 16) & 0xFF;
 771         alu->mac[4] = (alu_table[3] >> 8) & 0xFF;
 772         alu->mac[5] = alu_table[3] & 0xFF;
 773 }
 774
 775 static int ksz9477_port_fdb_dump(struct dsa_switch *ds, int port,
 776                                  dsa_fdb_dump_cb_t *cb, void *data)
 777 {
 778         struct ksz_device *dev = ds->priv;
 779         int ret = 0;
 780         u32 ksz_data;
 781         u32 alu_table[4];
 782         struct alu_struct alu;
 783         int timeout;
 784
 785         mutex_lock(&dev->alu_mutex);
 786
 787         /* start ALU search */
 788         ksz_write32(dev, REG_SW_ALU_CTRL__4, ALU_START | ALU_SEARCH);
 789
 790         do {
 791                 timeout = 1000;
 792                 do {
 793                         ksz_read32(dev, REG_SW_ALU_CTRL__4, &ksz_data);
 794                         if ((ksz_data & ALU_VALID) || !(ksz_data & ALU_START))
 795                                 break;
 796                         usleep_range(1, 10);
 797                 } while (timeout-- > 0);
 798
 799                 if (!timeout) {
 800                         dev_dbg(dev->dev, "Failed to search ALU\n");
 801                         ret = -ETIMEDOUT;
 802                         goto exit;
 803                 }
 804
 805                 /* read ALU table */
 806                 ksz9477_read_table(dev, alu_table);
 807
 808                 ksz9477_convert_alu(&alu, alu_table);
 809
 810                 if (alu.port_forward & BIT(port)) {
 811                         ret = cb(alu.mac, alu.fid, alu.is_static, data);
 812                         if (ret)
 813                                 goto exit;
 814                 }
 815         } while (ksz_data & ALU_START);
 816
 817 exit:
 818
 819         /* stop ALU search */
 820         ksz_write32(dev, REG_SW_ALU_CTRL__4, 0);
 821
 822         mutex_unlock(&dev->alu_mutex);
 823
 824         return ret;
 825 }
 826
 827 static void ksz9477_port_mdb_add(struct dsa_switch *ds, int port,
 828                                  const struct switchdev_obj_port_mdb *mdb)
 829 {
 830         struct ksz_device *dev = ds->priv;
 831         u32 static_table[4];
 832         u32 data;
 833         int index;
 834         u32 mac_hi, mac_lo;
 835
 836         mac_hi = ((mdb->addr[0] << 8) | mdb->addr[1]);
 837         mac_lo = ((mdb->addr[2] << 24) | (mdb->addr[3] << 16));
 838         mac_lo |= ((mdb->addr[4] << 8) | mdb->addr[5]);
 839
 840         mutex_lock(&dev->alu_mutex);
 841
 842         for (index = 0; index < dev->num_statics; index++) {
 843                 /* find empty slot first */
 844                 data = (index << ALU_STAT_INDEX_S) |
 845                         ALU_STAT_READ | ALU_STAT_START;
 846                 ksz_write32(dev, REG_SW_ALU_STAT_CTRL__4, data);
 847
 848                 /* wait to be finished */
 849                 if (ksz9477_wait_alu_sta_ready(dev, ALU_STAT_START, 1000) < 0) {
 850                         dev_dbg(dev->dev, "Failed to read ALU STATIC\n");
 851                         goto exit;
 852                 }
 853
 854                 /* read ALU static table */
 855                 ksz9477_read_table(dev, static_table);
 856
 857                 if (static_table[0] & ALU_V_STATIC_VALID) {
 858                         /* check this has same vid & mac address */
 859                         if (((static_table[2] >> ALU_V_FID_S) == mdb->vid) &&
 860                             ((static_table[2] & ALU_V_MAC_ADDR_HI) == mac_hi) &&
 861                             static_table[3] == mac_lo) {
 862                                 /* found matching one */
 863                                 break;
 864                         }
 865                 } else {
 866                         /* found empty one */
 867                         break;
 868                 }
 869         }
 870
 871         /* no available entry */
 872         if (index == dev->num_statics)
 873                 goto exit;
 874
 875         /* add entry */
 876         static_table[0] = ALU_V_STATIC_VALID;
 877         static_table[1] |= BIT(port);
 878         if (mdb->vid)
 879                 static_table[1] |= ALU_V_USE_FID;
 880         static_table[2] = (mdb->vid << ALU_V_FID_S);
 881         static_table[2] |= mac_hi;
 882         static_table[3] = mac_lo;
 883
 884         ksz9477_write_table(dev, static_table);
 885
 886         data = (index << ALU_STAT_INDEX_S) | ALU_STAT_START;
 887         ksz_write32(dev, REG_SW_ALU_STAT_CTRL__4, data);
 888
 889         /* wait to be finished */
 890         if (ksz9477_wait_alu_sta_ready(dev, ALU_STAT_START, 1000) < 0)
 891                 dev_dbg(dev->dev, "Failed to read ALU STATIC\n");
 892
 893 exit:
 894         mutex_unlock(&dev->alu_mutex);
 895 }
 896
 897 static int ksz9477_port_mdb_del(struct dsa_switch *ds, int port,
 898                                 const struct switchdev_obj_port_mdb *mdb)
 899 {
 900         struct ksz_device *dev = ds->priv;
 901         u32 static_table[4];
 902         u32 data;
 903         int index;
 904         int ret = 0;
 905         u32 mac_hi, mac_lo;
 906
 907         mac_hi = ((mdb->addr[0] << 8) | mdb->addr[1]);
 908         mac_lo = ((mdb->addr[2] << 24) | (mdb->addr[3] << 16));
 909         mac_lo |= ((mdb->addr[4] << 8) | mdb->addr[5]);
 910
 911         mutex_lock(&dev->alu_mutex);
 912
 913         for (index = 0; index < dev->num_statics; index++) {
 914                 /* find empty slot first */
 915                 data = (index << ALU_STAT_INDEX_S) |
 916                         ALU_STAT_READ | ALU_STAT_START;
 917                 ksz_write32(dev, REG_SW_ALU_STAT_CTRL__4, data);
 918
 919                 /* wait to be finished */
 920                 ret = ksz9477_wait_alu_sta_ready(dev, ALU_STAT_START, 1000);
 921                 if (ret < 0) {
 922                         dev_dbg(dev->dev, "Failed to read ALU STATIC\n");
 923                         goto exit;
 924                 }
 925
 926                 /* read ALU static table */
 927                 ksz9477_read_table(dev, static_table);
 928
 929                 if (static_table[0] & ALU_V_STATIC_VALID) {
 930                         /* check this has same vid & mac address */
 931
 932                         if (((static_table[2] >> ALU_V_FID_S) == mdb->vid) &&
 933                             ((static_table[2] & ALU_V_MAC_ADDR_HI) == mac_hi) &&
 934                             static_table[3] == mac_lo) {
 935                                 /* found matching one */
 936                                 break;
 937                         }
 938                 }
 939         }
 940
 941         /* no available entry */
 942         if (index == dev->num_statics)
 943                 goto exit;
 944
 945         /* clear port */
 946         static_table[1] &= ~BIT(port);
 947
 948         if ((static_table[1] & ALU_V_PORT_MAP) == 0) {
 949                 /* delete entry */
 950                 static_table[0] = 0;
 951                 static_table[1] = 0;
 952                 static_table[2] = 0;
 953                 static_table[3] = 0;
 954         }
 955
 956         ksz9477_write_table(dev, static_table);
 957
 958         data = (index << ALU_STAT_INDEX_S) | ALU_STAT_START;
 959         ksz_write32(dev, REG_SW_ALU_STAT_CTRL__4, data);
 960
 961         /* wait to be finished */
 962         ret = ksz9477_wait_alu_sta_ready(dev, ALU_STAT_START, 1000);
 963         if (ret < 0)
 964                 dev_dbg(dev->dev, "Failed to read ALU STATIC\n");
 965
 966 exit:
 967         mutex_unlock(&dev->alu_mutex);
 968
 969         return ret;
 970 }
 971
 972 static int ksz9477_port_mirror_add(struct dsa_switch *ds, int port,
 973                                    struct dsa_mall_mirror_tc_entry *mirror,
 974                                    bool ingress)
 975 {
 976         struct ksz_device *dev = ds->priv;
 977
 978         if (ingress)
 979                 ksz_port_cfg(dev, port, P_MIRROR_CTRL, PORT_MIRROR_RX, true);
 980         else
 981                 ksz_port_cfg(dev, port, P_MIRROR_CTRL, PORT_MIRROR_TX, true);
 982
 983         ksz_port_cfg(dev, port, P_MIRROR_CTRL, PORT_MIRROR_SNIFFER, false);
 984
 985         /* configure mirror port */
 986         ksz_port_cfg(dev, mirror->to_local_port, P_MIRROR_CTRL,
 987                      PORT_MIRROR_SNIFFER, true);
 988
 989         ksz_cfg(dev, S_MIRROR_CTRL, SW_MIRROR_RX_TX, false);
 990
 991         return 0;
 992 }
 993
 994 static void ksz9477_port_mirror_del(struct dsa_switch *ds, int port,
 995                                     struct dsa_mall_mirror_tc_entry *mirror)
 996 {
 997         struct ksz_device *dev = ds->priv;
 998         u8 data;
 999
1000         if (mirror->ingress)
1001                 ksz_port_cfg(dev, port, P_MIRROR_CTRL, PORT_MIRROR_RX, false);
1002         else
1003                 ksz_port_cfg(dev, port, P_MIRROR_CTRL, PORT_MIRROR_TX, false);
1004
1005         ksz_pread8(dev, port, P_MIRROR_CTRL, &data);
1006
1007         if (!(data & (PORT_MIRROR_RX | PORT_MIRROR_TX)))
1008                 ksz_port_cfg(dev, mirror->to_local_port, P_MIRROR_CTRL,
1009                              PORT_MIRROR_SNIFFER, false);
1010 }
1011
1012 static void ksz9477_phy_setup(struct ksz_device *dev, int port,
1013                               struct phy_device *phy)
1014 {
1015         /* Only apply to port with PHY. */
1016         if (port >= dev->phy_port_cnt)
1017                 return;
1018
1019         /* The MAC actually cannot run in 1000 half-duplex mode. */
1020         phy_remove_link_mode(phy,
1021                              ETHTOOL_LINK_MODE_1000baseT_Half_BIT);
1022
1023         /* PHY does not support gigabit. */
1024         if (!(dev->features & GBIT_SUPPORT))
1025                 phy_remove_link_mode(phy,
1026                                      ETHTOOL_LINK_MODE_1000baseT_Full_BIT);
1027 }
1028
1029 static bool ksz9477_get_gbit(struct ksz_device *dev, u8 data)
1030 {
1031         bool gbit;
1032
1033         if (dev->features & NEW_XMII)
1034                 gbit = !(data & PORT_MII_NOT_1GBIT);
1035         else
1036                 gbit = !!(data & PORT_MII_1000MBIT_S1);
1037         return gbit;
1038 }
1039
1040 static void ksz9477_set_gbit(struct ksz_device *dev, bool gbit, u8 *data)
1041 {
1042         if (dev->features & NEW_XMII) {
1043                 if (gbit)
1044                         *data &= ~PORT_MII_NOT_1GBIT;
1045                 else
1046                         *data |= PORT_MII_NOT_1GBIT;
1047         } else {
1048                 if (gbit)
1049                         *data |= PORT_MII_1000MBIT_S1;
1050                 else
1051                         *data &= ~PORT_MII_1000MBIT_S1;
1052         }
1053 }
1054
1055 static int ksz9477_get_xmii(struct ksz_device *dev, u8 data)
1056 {
1057         int mode;
1058
1059         if (dev->features & NEW_XMII) {
1060                 switch (data & PORT_MII_SEL_M) {
1061                 case PORT_MII_SEL:
1062                         mode = 0;
1063                         break;
1064                 case PORT_RMII_SEL:
1065                         mode = 1;
1066                         break;
1067                 case PORT_GMII_SEL:
1068                         mode = 2;
1069                         break;
1070                 default:
1071                         mode = 3;
1072                 }
1073         } else {
1074                 switch (data & PORT_MII_SEL_M) {
1075                 case PORT_MII_SEL_S1:
1076                         mode = 0;
1077                         break;
1078                 case PORT_RMII_SEL_S1:
1079                         mode = 1;
1080                         break;
1081                 case PORT_GMII_SEL_S1:
1082                         mode = 2;
1083                         break;
1084                 default:
1085                         mode = 3;
1086                 }
1087         }
1088         return mode;
1089 }
1090
1091 static void ksz9477_set_xmii(struct ksz_device *dev, int mode, u8 *data)
1092 {
1093         u8 xmii;
1094
1095         if (dev->features & NEW_XMII) {
1096                 switch (mode) {
1097                 case 0:
1098                         xmii = PORT_MII_SEL;
1099                         break;
1100                 case 1:
1101                         xmii = PORT_RMII_SEL;
1102                         break;
1103                 case 2:
1104                         xmii = PORT_GMII_SEL;
1105                         break;
1106                 default:
1107                         xmii = PORT_RGMII_SEL;
1108                         break;
1109                 }
1110         } else {
1111                 switch (mode) {
1112                 case 0:
1113                         xmii = PORT_MII_SEL_S1;
1114                         break;
1115                 case 1:
1116                         xmii = PORT_RMII_SEL_S1;
1117                         break;
1118                 case 2:
1119                         xmii = PORT_GMII_SEL_S1;
1120                         break;
1121                 default:
1122                         xmii = PORT_RGMII_SEL_S1;
1123                         break;
1124                 }
1125         }
1126         *data &= ~PORT_MII_SEL_M;
1127         *data |= xmii;
1128 }
1129
1130 static phy_interface_t ksz9477_get_interface(struct ksz_device *dev, int port)
1131 {
1132         phy_interface_t interface;
1133         bool gbit;
1134         int mode;
1135         u8 data8;
1136
1137         if (port < dev->phy_port_cnt)
1138                 return PHY_INTERFACE_MODE_NA;
1139         ksz_pread8(dev, port, REG_PORT_XMII_CTRL_1, &data8);
1140         gbit = ksz9477_get_gbit(dev, data8);
1141         mode = ksz9477_get_xmii(dev, data8);
1142         switch (mode) {
1143         case 2:
1144                 interface = PHY_INTERFACE_MODE_GMII;
1145                 if (gbit)
1146                         break;
1147                 /* fall through */
1148         case 0:
1149                 interface = PHY_INTERFACE_MODE_MII;
1150                 break;
1151         case 1:
1152                 interface = PHY_INTERFACE_MODE_RMII;
1153                 break;
1154         default:
1155                 interface = PHY_INTERFACE_MODE_RGMII;
1156                 if (data8 & PORT_RGMII_ID_EG_ENABLE)
1157                         interface = PHY_INTERFACE_MODE_RGMII_TXID;
1158                 if (data8 & PORT_RGMII_ID_IG_ENABLE) {
1159                         interface = PHY_INTERFACE_MODE_RGMII_RXID;
1160                         if (data8 & PORT_RGMII_ID_EG_ENABLE)
1161                                 interface = PHY_INTERFACE_MODE_RGMII_ID;
1162                 }
1163                 break;
1164         }
1165         return interface;
1166 }
1167
1168 static void ksz9477_port_setup(struct ksz_device *dev, int port, bool cpu_port)
1169 {
1170         u8 data8;
1171         u8 member;
1172         u16 data16;
1173         struct ksz_port *p = &dev->ports[port];
1174
1175         /* enable tag tail for host port */
1176         if (cpu_port)
1177                 ksz_port_cfg(dev, port, REG_PORT_CTRL_0, PORT_TAIL_TAG_ENABLE,
1178                              true);
1179
1180         ksz_port_cfg(dev, port, REG_PORT_CTRL_0, PORT_MAC_LOOPBACK, false);
1181
1182         /* set back pressure */
1183         ksz_port_cfg(dev, port, REG_PORT_MAC_CTRL_1, PORT_BACK_PRESSURE, true);
1184
1185         /* enable broadcast storm limit */
1186         ksz_port_cfg(dev, port, P_BCAST_STORM_CTRL, PORT_BROADCAST_STORM, true);
1187
1188         /* disable DiffServ priority */
1189         ksz_port_cfg(dev, port, P_PRIO_CTRL, PORT_DIFFSERV_PRIO_ENABLE, false);
1190
1191         /* replace priority */
1192         ksz_port_cfg(dev, port, REG_PORT_MRI_MAC_CTRL, PORT_USER_PRIO_CEILING,
1193                      false);
1194         ksz9477_port_cfg32(dev, port, REG_PORT_MTI_QUEUE_CTRL_0__4,
1195                            MTI_PVID_REPLACE, false);
1196
1197         /* enable 802.1p priority */
1198         ksz_port_cfg(dev, port, P_PRIO_CTRL, PORT_802_1P_PRIO_ENABLE, true);
1199
1200         if (port < dev->phy_port_cnt) {
1201                 /* do not force flow control */
1202                 ksz_port_cfg(dev, port, REG_PORT_CTRL_0,
1203                              PORT_FORCE_TX_FLOW_CTRL | PORT_FORCE_RX_FLOW_CTRL,
1204                              false);
1205
1206         } else {
1207                 /* force flow control */
1208                 ksz_port_cfg(dev, port, REG_PORT_CTRL_0,
1209                              PORT_FORCE_TX_FLOW_CTRL | PORT_FORCE_RX_FLOW_CTRL,
1210                              true);
1211
1212                 /* configure MAC to 1G & RGMII mode */
1213                 ksz_pread8(dev, port, REG_PORT_XMII_CTRL_1, &data8);
1214                 switch (dev->interface) {
1215                 case PHY_INTERFACE_MODE_MII:
1216                         ksz9477_set_xmii(dev, 0, &data8);
1217                         ksz9477_set_gbit(dev, false, &data8);
1218                         p->phydev.speed = SPEED_100;
1219                         break;
1220                 case PHY_INTERFACE_MODE_RMII:
1221                         ksz9477_set_xmii(dev, 1, &data8);
1222                         ksz9477_set_gbit(dev, false, &data8);
1223                         p->phydev.speed = SPEED_100;
1224                         break;
1225                 case PHY_INTERFACE_MODE_GMII:
1226                         ksz9477_set_xmii(dev, 2, &data8);
1227                         ksz9477_set_gbit(dev, true, &data8);
1228                         p->phydev.speed = SPEED_1000;
1229                         break;
1230                 default:
1231                         ksz9477_set_xmii(dev, 3, &data8);
1232                         ksz9477_set_gbit(dev, true, &data8);
1233                         data8 &= ~PORT_RGMII_ID_IG_ENABLE;
1234                         data8 &= ~PORT_RGMII_ID_EG_ENABLE;
1235                         if (dev->interface == PHY_INTERFACE_MODE_RGMII_ID ||
1236                             dev->interface == PHY_INTERFACE_MODE_RGMII_RXID)
1237                                 data8 |= PORT_RGMII_ID_IG_ENABLE;
1238                         if (dev->interface == PHY_INTERFACE_MODE_RGMII_ID ||
1239                             dev->interface == PHY_INTERFACE_MODE_RGMII_TXID)
1240                                 data8 |= PORT_RGMII_ID_EG_ENABLE;
1241                         p->phydev.speed = SPEED_1000;
1242                         break;
1243                 }
1244                 ksz_pwrite8(dev, port, REG_PORT_XMII_CTRL_1, data8);
1245                 p->phydev.duplex = 1;
1246         }
1247         mutex_lock(&dev->dev_mutex);
1248         if (cpu_port) {
1249                 member = dev->port_mask;
1250                 dev->on_ports = dev->host_mask;
1251                 dev->live_ports = dev->host_mask;
1252         } else {
1253                 member = dev->host_mask | p->vid_member;
1254                 dev->on_ports |= (1 << port);
1255
1256                 /* Link was detected before port is enabled. */
1257                 if (p->phydev.link)
1258                         dev->live_ports |= (1 << port);
1259         }
1260         mutex_unlock(&dev->dev_mutex);
1261         ksz9477_cfg_port_member(dev, port, member);
1262
1263         /* clear pending interrupts */
1264         if (port < dev->phy_port_cnt)
1265                 ksz_pread16(dev, port, REG_PORT_PHY_INT_ENABLE, &data16);
1266 }
1267
1268 static void ksz9477_config_cpu_port(struct dsa_switch *ds)
1269 {
1270         struct ksz_device *dev = ds->priv;
1271         struct ksz_port *p;
1272         int i;
1273
1274         ds->num_ports = dev->port_cnt;
1275
1276         for (i = 0; i < dev->port_cnt; i++) {
1277                 if (dsa_is_cpu_port(ds, i) && (dev->cpu_ports & (1 << i))) {
1278                         phy_interface_t interface;
1279
1280                         dev->cpu_port = i;
1281                         dev->host_mask = (1 << dev->cpu_port);
1282                         dev->port_mask |= dev->host_mask;
1283
1284                         /* Read from XMII register to determine host port
1285                          * interface.  If set specifically in device tree
1286                          * note the difference to help debugging.
1287                          */
1288                         interface = ksz9477_get_interface(dev, i);
1289                         if (!dev->interface)
1290                                 dev->interface = interface;
1291                         if (interface && interface != dev->interface)
1292                                 dev_info(dev->dev,
1293                                          "use %s instead of %s\n",
1294                                           phy_modes(dev->interface),
1295                                           phy_modes(interface));
1296
1297                         /* enable cpu port */
1298                         ksz9477_port_setup(dev, i, true);
1299                         p = &dev->ports[dev->cpu_port];
1300                         p->vid_member = dev->port_mask;
1301                         p->on = 1;
1302                 }
1303         }
1304
1305         dev->member = dev->host_mask;
1306
1307         for (i = 0; i < dev->mib_port_cnt; i++) {
1308                 if (i == dev->cpu_port)
1309                         continue;
1310                 p = &dev->ports[i];
1311
1312                 /* Initialize to non-zero so that ksz_cfg_port_member() will
1313                  * be called.
1314                  */
1315                 p->vid_member = (1 << i);
1316                 p->member = dev->port_mask;
1317                 ksz9477_port_stp_state_set(ds, i, BR_STATE_DISABLED);
1318                 p->on = 1;
1319                 if (i < dev->phy_port_cnt)
1320                         p->phy = 1;
1321                 if (dev->chip_id == 0x00947700 && i == 6) {
1322                         p->sgmii = 1;
1323
1324                         /* SGMII PHY detection code is not implemented yet. */
1325                         p->phy = 0;
1326                 }
1327         }
1328 }
1329
1330 static int ksz9477_setup(struct dsa_switch *ds)
1331 {
1332         struct ksz_device *dev = ds->priv;
1333         int ret = 0;
1334
1335         dev->vlan_cache = devm_kcalloc(dev->dev, sizeof(struct vlan_table),
1336                                        dev->num_vlans, GFP_KERNEL);
1337         if (!dev->vlan_cache)
1338                 return -ENOMEM;
1339
1340         ret = ksz9477_reset_switch(dev);
1341         if (ret) {
1342                 dev_err(ds->dev, "failed to reset switch\n");
1343                 return ret;
1344         }
1345
1346         /* Required for port partitioning. */
1347         ksz9477_cfg32(dev, REG_SW_QM_CTRL__4, UNICAST_VLAN_BOUNDARY,
1348                       true);
1349
1350         /* Do not work correctly with tail tagging. */
1351         ksz_cfg(dev, REG_SW_MAC_CTRL_0, SW_CHECK_LENGTH, false);
1352
1353         /* accept packet up to 2000bytes */
1354         ksz_cfg(dev, REG_SW_MAC_CTRL_1, SW_LEGAL_PACKET_DISABLE, true);
1355
1356         ksz9477_config_cpu_port(ds);
1357
1358         ksz_cfg(dev, REG_SW_MAC_CTRL_1, MULTICAST_STORM_DISABLE, true);
1359
1360         /* queue based egress rate limit */
1361         ksz_cfg(dev, REG_SW_MAC_CTRL_5, SW_OUT_RATE_LIMIT_QUEUE_BASED, true);
1362
1363         /* enable global MIB counter freeze function */
1364         ksz_cfg(dev, REG_SW_MAC_CTRL_6, SW_MIB_COUNTER_FREEZE, true);
1365
1366         /* start switch */
1367         ksz_cfg(dev, REG_SW_OPERATION, SW_START, true);
1368
1369         ksz_init_mib_timer(dev);
1370
1371         return 0;
1372 }
1373
1374 static const struct dsa_switch_ops ksz9477_switch_ops = {
1375         .get_tag_protocol       = ksz9477_get_tag_protocol,
1376         .setup                  = ksz9477_setup,
1377         .phy_read               = ksz9477_phy_read16,
1378         .phy_write              = ksz9477_phy_write16,
1379         .adjust_link            = ksz_adjust_link,
1380         .port_enable            = ksz_enable_port,
1381         .port_disable           = ksz_disable_port,
1382         .get_strings            = ksz9477_get_strings,
1383         .get_ethtool_stats      = ksz_get_ethtool_stats,
1384         .get_sset_count         = ksz_sset_count,
1385         .port_bridge_join       = ksz_port_bridge_join,
1386         .port_bridge_leave      = ksz_port_bridge_leave,
1387         .port_stp_state_set     = ksz9477_port_stp_state_set,
1388         .port_fast_age          = ksz_port_fast_age,
1389         .port_vlan_filtering    = ksz9477_port_vlan_filtering,
1390         .port_vlan_prepare      = ksz_port_vlan_prepare,
1391         .port_vlan_add          = ksz9477_port_vlan_add,
1392         .port_vlan_del          = ksz9477_port_vlan_del,
1393         .port_fdb_dump          = ksz9477_port_fdb_dump,
1394         .port_fdb_add           = ksz9477_port_fdb_add,
1395         .port_fdb_del           = ksz9477_port_fdb_del,
1396         .port_mdb_prepare       = ksz_port_mdb_prepare,
1397         .port_mdb_add           = ksz9477_port_mdb_add,
1398         .port_mdb_del           = ksz9477_port_mdb_del,
1399         .port_mirror_add        = ksz9477_port_mirror_add,
1400         .port_mirror_del        = ksz9477_port_mirror_del,
1401 };
1402
1403 static u32 ksz9477_get_port_addr(int port, int offset)
1404 {
1405         return PORT_CTRL_ADDR(port, offset);
1406 }
1407
1408 static int ksz9477_switch_detect(struct ksz_device *dev)
1409 {
1410         u8 data8;
1411         u8 id_hi;
1412         u8 id_lo;
1413         u32 id32;
1414         int ret;
1415
1416         /* turn off SPI DO Edge select */
1417         ret = ksz_read8(dev, REG_SW_GLOBAL_SERIAL_CTRL_0, &data8);
1418         if (ret)
1419                 return ret;
1420
1421         data8 &= ~SPI_AUTO_EDGE_DETECTION;
1422         ret = ksz_write8(dev, REG_SW_GLOBAL_SERIAL_CTRL_0, data8);
1423         if (ret)
1424                 return ret;
1425
1426         /* read chip id */
1427         ret = ksz_read32(dev, REG_CHIP_ID0__1, &id32);
1428         if (ret)
1429                 return ret;
1430         ret = ksz_read8(dev, REG_GLOBAL_OPTIONS, &data8);
1431         if (ret)
1432                 return ret;
1433
1434         /* Number of ports can be reduced depending on chip. */
1435         dev->mib_port_cnt = TOTAL_PORT_NUM;
1436         dev->phy_port_cnt = 5;
1437
1438         /* Default capability is gigabit capable. */
1439         dev->features = GBIT_SUPPORT;
1440
1441         id_hi = (u8)(id32 >> 16);
1442         id_lo = (u8)(id32 >> 8);
1443         if ((id_lo & 0xf) == 3) {
1444                 /* Chip is from KSZ9893 design. */
1445                 dev->features |= IS_9893;
1446
1447                 /* Chip does not support gigabit. */
1448                 if (data8 & SW_QW_ABLE)
1449                         dev->features &= ~GBIT_SUPPORT;
1450                 dev->mib_port_cnt = 3;
1451                 dev->phy_port_cnt = 2;
1452         } else {
1453                 /* Chip uses new XMII register definitions. */
1454                 dev->features |= NEW_XMII;
1455
1456                 /* Chip does not support gigabit. */
1457                 if (!(data8 & SW_GIGABIT_ABLE))
1458                         dev->features &= ~GBIT_SUPPORT;
1459         }
1460
1461         /* Change chip id to known ones so it can be matched against them. */
1462         id32 = (id_hi << 16) | (id_lo << 8);
1463
1464         dev->chip_id = id32;
1465
1466         return 0;
1467 }
1468
1469 struct ksz_chip_data {
1470         u32 chip_id;
1471         const char *dev_name;
1472         int num_vlans;
1473         int num_alus;
1474         int num_statics;
1475         int cpu_ports;
1476         int port_cnt;
1477 };
1478
1479 static const struct ksz_chip_data ksz9477_switch_chips[] = {
1480         {
1481                 .chip_id = 0x00947700,
1482                 .dev_name = "KSZ9477",
1483                 .num_vlans = 4096,
1484                 .num_alus = 4096,
1485                 .num_statics = 16,
1486                 .cpu_ports = 0x7F,      /* can be configured as cpu port */
1487                 .port_cnt = 7,          /* total physical port count */
1488         },
1489         {
1490                 .chip_id = 0x00989700,
1491                 .dev_name = "KSZ9897",
1492                 .num_vlans = 4096,
1493                 .num_alus = 4096,
1494                 .num_statics = 16,
1495                 .cpu_ports = 0x7F,      /* can be configured as cpu port */
1496                 .port_cnt = 7,          /* total physical port count */
1497         },
1498         {
1499                 .chip_id = 0x00989300,
1500                 .dev_name = "KSZ9893",
1501                 .num_vlans = 4096,
1502                 .num_alus = 4096,
1503                 .num_statics = 16,
1504                 .cpu_ports = 0x07,      /* can be configured as cpu port */
1505                 .port_cnt = 3,          /* total port count */
1506         },
1507 };
1508
1509 static int ksz9477_switch_init(struct ksz_device *dev)
1510 {
1511         int i;
1512
1513         dev->ds->ops = &ksz9477_switch_ops;
1514
1515         for (i = 0; i < ARRAY_SIZE(ksz9477_switch_chips); i++) {
1516                 const struct ksz_chip_data *chip = &ksz9477_switch_chips[i];
1517
1518                 if (dev->chip_id == chip->chip_id) {
1519                         dev->name = chip->dev_name;
1520                         dev->num_vlans = chip->num_vlans;
1521                         dev->num_alus = chip->num_alus;
1522                         dev->num_statics = chip->num_statics;
1523                         dev->port_cnt = chip->port_cnt;
1524                         dev->cpu_ports = chip->cpu_ports;
1525
1526                         break;
1527                 }
1528         }
1529
1530         /* no switch found */
1531         if (!dev->port_cnt)
1532                 return -ENODEV;
1533
1534         dev->port_mask = (1 << dev->port_cnt) - 1;
1535
1536         dev->reg_mib_cnt = SWITCH_COUNTER_NUM;
1537         dev->mib_cnt = TOTAL_SWITCH_COUNTER_NUM;
1538
1539         i = dev->mib_port_cnt;
1540         dev->ports = devm_kzalloc(dev->dev, sizeof(struct ksz_port) * i,
1541                                   GFP_KERNEL);
1542         if (!dev->ports)
1543                 return -ENOMEM;
1544         for (i = 0; i < dev->mib_port_cnt; i++) {
1545                 mutex_init(&dev->ports[i].mib.cnt_mutex);
1546                 dev->ports[i].mib.counters =
1547                         devm_kzalloc(dev->dev,
1548                                      sizeof(u64) *
1549                                      (TOTAL_SWITCH_COUNTER_NUM + 1),
1550                                      GFP_KERNEL);
1551                 if (!dev->ports[i].mib.counters)
1552                         return -ENOMEM;
1553         }
1554
1555         return 0;
1556 }
1557
1558 static void ksz9477_switch_exit(struct ksz_device *dev)
1559 {
1560         ksz9477_reset_switch(dev);
1561 }
1562
1563 static const struct ksz_dev_ops ksz9477_dev_ops = {
1564         .get_port_addr = ksz9477_get_port_addr,
1565         .cfg_port_member = ksz9477_cfg_port_member,
1566         .flush_dyn_mac_table = ksz9477_flush_dyn_mac_table,
1567         .phy_setup = ksz9477_phy_setup,
1568         .port_setup = ksz9477_port_setup,
1569         .r_mib_cnt = ksz9477_r_mib_cnt,
1570         .r_mib_pkt = ksz9477_r_mib_pkt,
1571         .freeze_mib = ksz9477_freeze_mib,
1572         .port_init_cnt = ksz9477_port_init_cnt,
1573         .shutdown = ksz9477_reset_switch,
1574         .detect = ksz9477_switch_detect,
1575         .init = ksz9477_switch_init,
1576         .exit = ksz9477_switch_exit,
1577 };
1578
1579 int ksz9477_switch_register(struct ksz_device *dev)
1580 {
1581         return ksz_switch_register(dev, &ksz9477_dev_ops);
1582 }
1583 EXPORT_SYMBOL(ksz9477_switch_register);
1584
1585 MODULE_AUTHOR("Woojung Huh <Woojung.Huh@microchip.com>");
1586 MODULE_DESCRIPTION("Microchip KSZ9477 Series Switch DSA Driver");
1587 MODULE_LICENSE("GPL");