Merge tag 'trace-v5.14-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt...
[linux-2.6-microblaze.git] / drivers / mmc / host / sdhci-xenon.h
1 /* SPDX-License-Identifier: GPL-2.0-only */
2 /*
3  * Copyright (C) 2016 Marvell, All Rights Reserved.
4  *
5  * Author:      Hu Ziji <huziji@marvell.com>
6  * Date:        2016-8-24
7  */
8 #ifndef SDHCI_XENON_H_
9 #define SDHCI_XENON_H_
10
11 /* Register Offset of Xenon SDHC self-defined register */
12 #define XENON_SYS_CFG_INFO                      0x0104
13 #define XENON_SLOT_TYPE_SDIO_SHIFT              24
14 #define XENON_NR_SUPPORTED_SLOT_MASK            0x7
15
16 #define XENON_SYS_OP_CTRL                       0x0108
17 #define XENON_AUTO_CLKGATE_DISABLE_MASK         BIT(20)
18 #define XENON_SDCLK_IDLEOFF_ENABLE_SHIFT        8
19 #define XENON_SLOT_ENABLE_SHIFT                 0
20
21 #define XENON_SYS_EXT_OP_CTRL                   0x010C
22 #define XENON_MASK_CMD_CONFLICT_ERR             BIT(8)
23
24 #define XENON_SLOT_OP_STATUS_CTRL               0x0128
25 #define XENON_TUN_CONSECUTIVE_TIMES_SHIFT       16
26 #define XENON_TUN_CONSECUTIVE_TIMES_MASK        0x7
27 #define XENON_TUN_CONSECUTIVE_TIMES             0x4
28 #define XENON_TUNING_STEP_SHIFT                 12
29 #define XENON_TUNING_STEP_MASK                  0xF
30 #define XENON_TUNING_STEP_DIVIDER               BIT(6)
31
32 #define XENON_SLOT_EMMC_CTRL                    0x0130
33 #define XENON_ENABLE_RESP_STROBE                BIT(25)
34 #define XENON_ENABLE_DATA_STROBE                BIT(24)
35
36 #define XENON_SLOT_RETUNING_REQ_CTRL            0x0144
37 /* retuning compatible */
38 #define XENON_RETUNING_COMPATIBLE               0x1
39
40 #define XENON_SLOT_EXT_PRESENT_STATE            0x014C
41 #define XENON_DLL_LOCK_STATE                    0x1
42
43 #define XENON_SLOT_DLL_CUR_DLY_VAL              0x0150
44
45 /* Tuning Parameter */
46 #define XENON_TMR_RETUN_NO_PRESENT              0xF
47 #define XENON_DEF_TUNING_COUNT                  0x9
48
49 #define XENON_DEFAULT_SDCLK_FREQ                400000
50 #define XENON_LOWEST_SDCLK_FREQ                 100000
51
52 /* Xenon specific Mode Select value */
53 #define XENON_CTRL_HS200                        0x5
54 #define XENON_CTRL_HS400                        0x6
55
56 enum xenon_variant {
57         XENON_A3700,
58         XENON_AP806,
59         XENON_AP807,
60         XENON_CP110
61 };
62
63 struct xenon_priv {
64         unsigned char   tuning_count;
65         /* idx of SDHC */
66         u8              sdhc_id;
67
68         /*
69          * eMMC/SD/SDIO require different register settings.
70          * Xenon driver has to recognize card type
71          * before mmc_host->card is not available.
72          * This field records the card type during init.
73          * It is updated in xenon_init_card().
74          *
75          * It is only valid during initialization after it is updated.
76          * Do not access this variable in normal transfers after
77          * initialization completes.
78          */
79         unsigned int    init_card_type;
80
81         /*
82          * The bus_width, timing, and clock fields in below
83          * record the current ios setting of Xenon SDHC.
84          * Driver will adjust PHY setting if any change to
85          * ios affects PHY timing.
86          */
87         unsigned char   bus_width;
88         unsigned char   timing;
89         unsigned int    clock;
90         struct clk      *axi_clk;
91
92         int             phy_type;
93         /*
94          * Contains board-specific PHY parameters
95          * passed from device tree.
96          */
97         void            *phy_params;
98         struct xenon_emmc_phy_regs *emmc_phy_regs;
99         bool restore_needed;
100         enum xenon_variant hw_version;
101 };
102
103 int xenon_phy_adj(struct sdhci_host *host, struct mmc_ios *ios);
104 int xenon_phy_parse_params(struct device *dev,
105                            struct sdhci_host *host);
106 void xenon_soc_pad_ctrl(struct sdhci_host *host,
107                         unsigned char signal_voltage);
108 #endif