Merge tag 'asm-generic-5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd...
[linux-2.6-microblaze.git] / drivers / mmc / host / dw_mmc.h
1 /* SPDX-License-Identifier: GPL-2.0-or-later */
2 /*
3  * Synopsys DesignWare Multimedia Card Interface driver
4  *  (Based on NXP driver for lpc 31xx)
5  *
6  * Copyright (C) 2009 NXP Semiconductors
7  * Copyright (C) 2009, 2010 Imagination Technologies Ltd.
8  */
9
10 #ifndef _DW_MMC_H_
11 #define _DW_MMC_H_
12
13 #include <linux/scatterlist.h>
14 #include <linux/mmc/core.h>
15 #include <linux/dmaengine.h>
16 #include <linux/reset.h>
17 #include <linux/fault-inject.h>
18 #include <linux/hrtimer.h>
19 #include <linux/interrupt.h>
20
21 enum dw_mci_state {
22         STATE_IDLE = 0,
23         STATE_SENDING_CMD,
24         STATE_SENDING_DATA,
25         STATE_DATA_BUSY,
26         STATE_SENDING_STOP,
27         STATE_DATA_ERROR,
28         STATE_SENDING_CMD11,
29         STATE_WAITING_CMD11_DONE,
30 };
31
32 enum {
33         EVENT_CMD_COMPLETE = 0,
34         EVENT_XFER_COMPLETE,
35         EVENT_DATA_COMPLETE,
36         EVENT_DATA_ERROR,
37 };
38
39 enum dw_mci_cookie {
40         COOKIE_UNMAPPED,
41         COOKIE_PRE_MAPPED,      /* mapped by pre_req() of dwmmc */
42         COOKIE_MAPPED,          /* mapped by prepare_data() of dwmmc */
43 };
44
45 struct mmc_data;
46
47 enum {
48         TRANS_MODE_PIO = 0,
49         TRANS_MODE_IDMAC,
50         TRANS_MODE_EDMAC
51 };
52
53 struct dw_mci_dma_slave {
54         struct dma_chan *ch;
55         enum dma_transfer_direction direction;
56 };
57
58 /**
59  * struct dw_mci - MMC controller state shared between all slots
60  * @lock: Spinlock protecting the queue and associated data.
61  * @irq_lock: Spinlock protecting the INTMASK setting.
62  * @regs: Pointer to MMIO registers.
63  * @fifo_reg: Pointer to MMIO registers for data FIFO
64  * @sg: Scatterlist entry currently being processed by PIO code, if any.
65  * @sg_miter: PIO mapping scatterlist iterator.
66  * @mrq: The request currently being processed on @slot,
67  *      or NULL if the controller is idle.
68  * @cmd: The command currently being sent to the card, or NULL.
69  * @data: The data currently being transferred, or NULL if no data
70  *      transfer is in progress.
71  * @stop_abort: The command currently prepared for stoping transfer.
72  * @prev_blksz: The former transfer blksz record.
73  * @timing: Record of current ios timing.
74  * @use_dma: Which DMA channel is in use for the current transfer, zero
75  *      denotes PIO mode.
76  * @using_dma: Whether DMA is in use for the current transfer.
77  * @dma_64bit_address: Whether DMA supports 64-bit address mode or not.
78  * @sg_dma: Bus address of DMA buffer.
79  * @sg_cpu: Virtual address of DMA buffer.
80  * @dma_ops: Pointer to platform-specific DMA callbacks.
81  * @cmd_status: Snapshot of SR taken upon completion of the current
82  * @ring_size: Buffer size for idma descriptors.
83  *      command. Only valid when EVENT_CMD_COMPLETE is pending.
84  * @dms: structure of slave-dma private data.
85  * @phy_regs: physical address of controller's register map
86  * @data_status: Snapshot of SR taken upon completion of the current
87  *      data transfer. Only valid when EVENT_DATA_COMPLETE or
88  *      EVENT_DATA_ERROR is pending.
89  * @stop_cmdr: Value to be loaded into CMDR when the stop command is
90  *      to be sent.
91  * @dir_status: Direction of current transfer.
92  * @tasklet: Tasklet running the request state machine.
93  * @pending_events: Bitmask of events flagged by the interrupt handler
94  *      to be processed by the tasklet.
95  * @completed_events: Bitmask of events which the state machine has
96  *      processed.
97  * @state: Tasklet state.
98  * @queue: List of slots waiting for access to the controller.
99  * @bus_hz: The rate of @mck in Hz. This forms the basis for MMC bus
100  *      rate and timeout calculations.
101  * @current_speed: Configured rate of the controller.
102  * @fifoth_val: The value of FIFOTH register.
103  * @verid: Denote Version ID.
104  * @dev: Device associated with the MMC controller.
105  * @pdata: Platform data associated with the MMC controller.
106  * @drv_data: Driver specific data for identified variant of the controller
107  * @priv: Implementation defined private data.
108  * @biu_clk: Pointer to bus interface unit clock instance.
109  * @ciu_clk: Pointer to card interface unit clock instance.
110  * @slot: Slots sharing this MMC controller.
111  * @fifo_depth: depth of FIFO.
112  * @data_addr_override: override fifo reg offset with this value.
113  * @wm_aligned: force fifo watermark equal with data length in PIO mode.
114  *      Set as true if alignment is needed.
115  * @data_shift: log2 of FIFO item size.
116  * @part_buf_start: Start index in part_buf.
117  * @part_buf_count: Bytes of partial data in part_buf.
118  * @part_buf: Simple buffer for partial fifo reads/writes.
119  * @push_data: Pointer to FIFO push function.
120  * @pull_data: Pointer to FIFO pull function.
121  * @vqmmc_enabled: Status of vqmmc, should be true or false.
122  * @irq_flags: The flags to be passed to request_irq.
123  * @irq: The irq value to be passed to request_irq.
124  * @sdio_id0: Number of slot0 in the SDIO interrupt registers.
125  * @cmd11_timer: Timer for SD3.0 voltage switch over scheme.
126  * @cto_timer: Timer for broken command transfer over scheme.
127  * @dto_timer: Timer for broken data transfer over scheme.
128  *
129  * Locking
130  * =======
131  *
132  * @lock is a softirq-safe spinlock protecting @queue as well as
133  * @slot, @mrq and @state. These must always be updated
134  * at the same time while holding @lock.
135  * The @mrq field of struct dw_mci_slot is also protected by @lock,
136  * and must always be written at the same time as the slot is added to
137  * @queue.
138  *
139  * @irq_lock is an irq-safe spinlock protecting the INTMASK register
140  * to allow the interrupt handler to modify it directly.  Held for only long
141  * enough to read-modify-write INTMASK and no other locks are grabbed when
142  * holding this one.
143  *
144  * @pending_events and @completed_events are accessed using atomic bit
145  * operations, so they don't need any locking.
146  *
147  * None of the fields touched by the interrupt handler need any
148  * locking. However, ordering is important: Before EVENT_DATA_ERROR or
149  * EVENT_DATA_COMPLETE is set in @pending_events, all data-related
150  * interrupts must be disabled and @data_status updated with a
151  * snapshot of SR. Similarly, before EVENT_CMD_COMPLETE is set, the
152  * CMDRDY interrupt must be disabled and @cmd_status updated with a
153  * snapshot of SR, and before EVENT_XFER_COMPLETE can be set, the
154  * bytes_xfered field of @data must be written. This is ensured by
155  * using barriers.
156  */
157 struct dw_mci {
158         spinlock_t              lock;
159         spinlock_t              irq_lock;
160         void __iomem            *regs;
161         void __iomem            *fifo_reg;
162         u32                     data_addr_override;
163         bool                    wm_aligned;
164
165         struct scatterlist      *sg;
166         struct sg_mapping_iter  sg_miter;
167
168         struct mmc_request      *mrq;
169         struct mmc_command      *cmd;
170         struct mmc_data         *data;
171         struct mmc_command      stop_abort;
172         unsigned int            prev_blksz;
173         unsigned char           timing;
174
175         /* DMA interface members*/
176         int                     use_dma;
177         int                     using_dma;
178         int                     dma_64bit_address;
179
180         dma_addr_t              sg_dma;
181         void                    *sg_cpu;
182         const struct dw_mci_dma_ops     *dma_ops;
183         /* For idmac */
184         unsigned int            ring_size;
185
186         /* For edmac */
187         struct dw_mci_dma_slave *dms;
188         /* Registers's physical base address */
189         resource_size_t         phy_regs;
190
191         u32                     cmd_status;
192         u32                     data_status;
193         u32                     stop_cmdr;
194         u32                     dir_status;
195         struct tasklet_struct   tasklet;
196         unsigned long           pending_events;
197         unsigned long           completed_events;
198         enum dw_mci_state       state;
199         struct list_head        queue;
200
201         u32                     bus_hz;
202         u32                     current_speed;
203         u32                     fifoth_val;
204         u16                     verid;
205         struct device           *dev;
206         struct dw_mci_board     *pdata;
207         const struct dw_mci_drv_data    *drv_data;
208         void                    *priv;
209         struct clk              *biu_clk;
210         struct clk              *ciu_clk;
211         struct dw_mci_slot      *slot;
212
213         /* FIFO push and pull */
214         int                     fifo_depth;
215         int                     data_shift;
216         u8                      part_buf_start;
217         u8                      part_buf_count;
218         union {
219                 u16             part_buf16;
220                 u32             part_buf32;
221                 u64             part_buf;
222         };
223         void (*push_data)(struct dw_mci *host, void *buf, int cnt);
224         void (*pull_data)(struct dw_mci *host, void *buf, int cnt);
225
226         bool                    vqmmc_enabled;
227         unsigned long           irq_flags; /* IRQ flags */
228         int                     irq;
229
230         int                     sdio_id0;
231
232         struct timer_list       cmd11_timer;
233         struct timer_list       cto_timer;
234         struct timer_list       dto_timer;
235
236 #ifdef CONFIG_FAULT_INJECTION
237         struct fault_attr       fail_data_crc;
238         struct hrtimer          fault_timer;
239 #endif
240 };
241
242 /* DMA ops for Internal/External DMAC interface */
243 struct dw_mci_dma_ops {
244         /* DMA Ops */
245         int (*init)(struct dw_mci *host);
246         int (*start)(struct dw_mci *host, unsigned int sg_len);
247         void (*complete)(void *host);
248         void (*stop)(struct dw_mci *host);
249         void (*cleanup)(struct dw_mci *host);
250         void (*exit)(struct dw_mci *host);
251 };
252
253 struct dma_pdata;
254
255 /* Board platform data */
256 struct dw_mci_board {
257         unsigned int bus_hz; /* Clock speed at the cclk_in pad */
258
259         u32 caps;       /* Capabilities */
260         u32 caps2;      /* More capabilities */
261         u32 pm_caps;    /* PM capabilities */
262         /*
263          * Override fifo depth. If 0, autodetect it from the FIFOTH register,
264          * but note that this may not be reliable after a bootloader has used
265          * it.
266          */
267         unsigned int fifo_depth;
268
269         /* delay in mS before detecting cards after interrupt */
270         u32 detect_delay_ms;
271
272         struct reset_control *rstc;
273         struct dw_mci_dma_ops *dma_ops;
274         struct dma_pdata *data;
275 };
276
277 #define DW_MMC_240A             0x240a
278 #define DW_MMC_280A             0x280a
279
280 #define SDMMC_CTRL              0x000
281 #define SDMMC_PWREN             0x004
282 #define SDMMC_CLKDIV            0x008
283 #define SDMMC_CLKSRC            0x00c
284 #define SDMMC_CLKENA            0x010
285 #define SDMMC_TMOUT             0x014
286 #define SDMMC_CTYPE             0x018
287 #define SDMMC_BLKSIZ            0x01c
288 #define SDMMC_BYTCNT            0x020
289 #define SDMMC_INTMASK           0x024
290 #define SDMMC_CMDARG            0x028
291 #define SDMMC_CMD               0x02c
292 #define SDMMC_RESP0             0x030
293 #define SDMMC_RESP1             0x034
294 #define SDMMC_RESP2             0x038
295 #define SDMMC_RESP3             0x03c
296 #define SDMMC_MINTSTS           0x040
297 #define SDMMC_RINTSTS           0x044
298 #define SDMMC_STATUS            0x048
299 #define SDMMC_FIFOTH            0x04c
300 #define SDMMC_CDETECT           0x050
301 #define SDMMC_WRTPRT            0x054
302 #define SDMMC_GPIO              0x058
303 #define SDMMC_TCBCNT            0x05c
304 #define SDMMC_TBBCNT            0x060
305 #define SDMMC_DEBNCE            0x064
306 #define SDMMC_USRID             0x068
307 #define SDMMC_VERID             0x06c
308 #define SDMMC_HCON              0x070
309 #define SDMMC_UHS_REG           0x074
310 #define SDMMC_RST_N             0x078
311 #define SDMMC_BMOD              0x080
312 #define SDMMC_PLDMND            0x084
313 #define SDMMC_DBADDR            0x088
314 #define SDMMC_IDSTS             0x08c
315 #define SDMMC_IDINTEN           0x090
316 #define SDMMC_DSCADDR           0x094
317 #define SDMMC_BUFADDR           0x098
318 #define SDMMC_CDTHRCTL          0x100
319 #define SDMMC_UHS_REG_EXT       0x108
320 #define SDMMC_DDR_REG           0x10c
321 #define SDMMC_ENABLE_SHIFT      0x110
322 #define SDMMC_DATA(x)           (x)
323 /*
324  * Registers to support idmac 64-bit address mode
325  */
326 #define SDMMC_DBADDRL           0x088
327 #define SDMMC_DBADDRU           0x08c
328 #define SDMMC_IDSTS64           0x090
329 #define SDMMC_IDINTEN64         0x094
330 #define SDMMC_DSCADDRL          0x098
331 #define SDMMC_DSCADDRU          0x09c
332 #define SDMMC_BUFADDRL          0x0A0
333 #define SDMMC_BUFADDRU          0x0A4
334
335 /*
336  * Data offset is difference according to Version
337  * Lower than 2.40a : data register offest is 0x100
338  */
339 #define DATA_OFFSET             0x100
340 #define DATA_240A_OFFSET        0x200
341
342 /* shift bit field */
343 #define _SBF(f, v)              ((v) << (f))
344
345 /* Control register defines */
346 #define SDMMC_CTRL_USE_IDMAC            BIT(25)
347 #define SDMMC_CTRL_CEATA_INT_EN         BIT(11)
348 #define SDMMC_CTRL_SEND_AS_CCSD         BIT(10)
349 #define SDMMC_CTRL_SEND_CCSD            BIT(9)
350 #define SDMMC_CTRL_ABRT_READ_DATA       BIT(8)
351 #define SDMMC_CTRL_SEND_IRQ_RESP        BIT(7)
352 #define SDMMC_CTRL_READ_WAIT            BIT(6)
353 #define SDMMC_CTRL_DMA_ENABLE           BIT(5)
354 #define SDMMC_CTRL_INT_ENABLE           BIT(4)
355 #define SDMMC_CTRL_DMA_RESET            BIT(2)
356 #define SDMMC_CTRL_FIFO_RESET           BIT(1)
357 #define SDMMC_CTRL_RESET                BIT(0)
358 /* Clock Enable register defines */
359 #define SDMMC_CLKEN_LOW_PWR             BIT(16)
360 #define SDMMC_CLKEN_ENABLE              BIT(0)
361 /* time-out register defines */
362 #define SDMMC_TMOUT_DATA(n)             _SBF(8, (n))
363 #define SDMMC_TMOUT_DATA_MSK            0xFFFFFF00
364 #define SDMMC_TMOUT_RESP(n)             ((n) & 0xFF)
365 #define SDMMC_TMOUT_RESP_MSK            0xFF
366 /* card-type register defines */
367 #define SDMMC_CTYPE_8BIT                BIT(16)
368 #define SDMMC_CTYPE_4BIT                BIT(0)
369 #define SDMMC_CTYPE_1BIT                0
370 /* Interrupt status & mask register defines */
371 #define SDMMC_INT_SDIO(n)               BIT(16 + (n))
372 #define SDMMC_INT_EBE                   BIT(15)
373 #define SDMMC_INT_ACD                   BIT(14)
374 #define SDMMC_INT_SBE                   BIT(13)
375 #define SDMMC_INT_HLE                   BIT(12)
376 #define SDMMC_INT_FRUN                  BIT(11)
377 #define SDMMC_INT_HTO                   BIT(10)
378 #define SDMMC_INT_VOLT_SWITCH           BIT(10) /* overloads bit 10! */
379 #define SDMMC_INT_DRTO                  BIT(9)
380 #define SDMMC_INT_RTO                   BIT(8)
381 #define SDMMC_INT_DCRC                  BIT(7)
382 #define SDMMC_INT_RCRC                  BIT(6)
383 #define SDMMC_INT_RXDR                  BIT(5)
384 #define SDMMC_INT_TXDR                  BIT(4)
385 #define SDMMC_INT_DATA_OVER             BIT(3)
386 #define SDMMC_INT_CMD_DONE              BIT(2)
387 #define SDMMC_INT_RESP_ERR              BIT(1)
388 #define SDMMC_INT_CD                    BIT(0)
389 #define SDMMC_INT_ERROR                 0xbfc2
390 /* Command register defines */
391 #define SDMMC_CMD_START                 BIT(31)
392 #define SDMMC_CMD_USE_HOLD_REG  BIT(29)
393 #define SDMMC_CMD_VOLT_SWITCH           BIT(28)
394 #define SDMMC_CMD_CCS_EXP               BIT(23)
395 #define SDMMC_CMD_CEATA_RD              BIT(22)
396 #define SDMMC_CMD_UPD_CLK               BIT(21)
397 #define SDMMC_CMD_INIT                  BIT(15)
398 #define SDMMC_CMD_STOP                  BIT(14)
399 #define SDMMC_CMD_PRV_DAT_WAIT          BIT(13)
400 #define SDMMC_CMD_SEND_STOP             BIT(12)
401 #define SDMMC_CMD_STRM_MODE             BIT(11)
402 #define SDMMC_CMD_DAT_WR                BIT(10)
403 #define SDMMC_CMD_DAT_EXP               BIT(9)
404 #define SDMMC_CMD_RESP_CRC              BIT(8)
405 #define SDMMC_CMD_RESP_LONG             BIT(7)
406 #define SDMMC_CMD_RESP_EXP              BIT(6)
407 #define SDMMC_CMD_INDX(n)               ((n) & 0x1F)
408 /* Status register defines */
409 #define SDMMC_GET_FCNT(x)               (((x)>>17) & 0x1FFF)
410 #define SDMMC_STATUS_DMA_REQ            BIT(31)
411 #define SDMMC_STATUS_BUSY               BIT(9)
412 /* FIFOTH register defines */
413 #define SDMMC_SET_FIFOTH(m, r, t)       (((m) & 0x7) << 28 | \
414                                          ((r) & 0xFFF) << 16 | \
415                                          ((t) & 0xFFF))
416 /* HCON register defines */
417 #define DMA_INTERFACE_IDMA              (0x0)
418 #define DMA_INTERFACE_DWDMA             (0x1)
419 #define DMA_INTERFACE_GDMA              (0x2)
420 #define DMA_INTERFACE_NODMA             (0x3)
421 #define SDMMC_GET_TRANS_MODE(x)         (((x)>>16) & 0x3)
422 #define SDMMC_GET_SLOT_NUM(x)           ((((x)>>1) & 0x1F) + 1)
423 #define SDMMC_GET_HDATA_WIDTH(x)        (((x)>>7) & 0x7)
424 #define SDMMC_GET_ADDR_CONFIG(x)        (((x)>>27) & 0x1)
425 /* Internal DMAC interrupt defines */
426 #define SDMMC_IDMAC_INT_AI              BIT(9)
427 #define SDMMC_IDMAC_INT_NI              BIT(8)
428 #define SDMMC_IDMAC_INT_CES             BIT(5)
429 #define SDMMC_IDMAC_INT_DU              BIT(4)
430 #define SDMMC_IDMAC_INT_FBE             BIT(2)
431 #define SDMMC_IDMAC_INT_RI              BIT(1)
432 #define SDMMC_IDMAC_INT_TI              BIT(0)
433 /* Internal DMAC bus mode bits */
434 #define SDMMC_IDMAC_ENABLE              BIT(7)
435 #define SDMMC_IDMAC_FB                  BIT(1)
436 #define SDMMC_IDMAC_SWRESET             BIT(0)
437 /* H/W reset */
438 #define SDMMC_RST_HWACTIVE              0x1
439 /* Version ID register define */
440 #define SDMMC_GET_VERID(x)              ((x) & 0xFFFF)
441 /* Card read threshold */
442 #define SDMMC_SET_THLD(v, x)            (((v) & 0xFFF) << 16 | (x))
443 #define SDMMC_CARD_WR_THR_EN            BIT(2)
444 #define SDMMC_CARD_RD_THR_EN            BIT(0)
445 /* UHS-1 register defines */
446 #define SDMMC_UHS_DDR                   BIT(16)
447 #define SDMMC_UHS_18V                   BIT(0)
448 /* DDR register defines */
449 #define SDMMC_DDR_HS400                 BIT(31)
450 /* Enable shift register defines */
451 #define SDMMC_ENABLE_PHASE              BIT(0)
452 /* All ctrl reset bits */
453 #define SDMMC_CTRL_ALL_RESET_FLAGS \
454         (SDMMC_CTRL_RESET | SDMMC_CTRL_FIFO_RESET | SDMMC_CTRL_DMA_RESET)
455
456 /* FIFO register access macros. These should not change the data endian-ness
457  * as they are written to memory to be dealt with by the upper layers
458  */
459 #define mci_fifo_readw(__reg)   __raw_readw(__reg)
460 #define mci_fifo_readl(__reg)   __raw_readl(__reg)
461 #define mci_fifo_readq(__reg)   __raw_readq(__reg)
462
463 #define mci_fifo_writew(__value, __reg) __raw_writew(__reg, __value)
464 #define mci_fifo_writel(__value, __reg) __raw_writel(__reg, __value)
465 #define mci_fifo_writeq(__value, __reg) __raw_writeq(__reg, __value)
466
467 /* Register access macros */
468 #define mci_readl(dev, reg)                     \
469         readl_relaxed((dev)->regs + SDMMC_##reg)
470 #define mci_writel(dev, reg, value)                     \
471         writel_relaxed((value), (dev)->regs + SDMMC_##reg)
472
473 /* 16-bit FIFO access macros */
474 #define mci_readw(dev, reg)                     \
475         readw_relaxed((dev)->regs + SDMMC_##reg)
476 #define mci_writew(dev, reg, value)                     \
477         writew_relaxed((value), (dev)->regs + SDMMC_##reg)
478
479 /* 64-bit FIFO access macros */
480 #ifdef readq
481 #define mci_readq(dev, reg)                     \
482         readq_relaxed((dev)->regs + SDMMC_##reg)
483 #define mci_writeq(dev, reg, value)                     \
484         writeq_relaxed((value), (dev)->regs + SDMMC_##reg)
485 #else
486 /*
487  * Dummy readq implementation for architectures that don't define it.
488  *
489  * We would assume that none of these architectures would configure
490  * the IP block with a 64bit FIFO width, so this code will never be
491  * executed on those machines. Defining these macros here keeps the
492  * rest of the code free from ifdefs.
493  */
494 #define mci_readq(dev, reg)                     \
495         (*(volatile u64 __force *)((dev)->regs + SDMMC_##reg))
496 #define mci_writeq(dev, reg, value)                     \
497         (*(volatile u64 __force *)((dev)->regs + SDMMC_##reg) = (value))
498
499 #define __raw_writeq(__value, __reg) \
500         (*(volatile u64 __force *)(__reg) = (__value))
501 #define __raw_readq(__reg) (*(volatile u64 __force *)(__reg))
502 #endif
503
504 extern int dw_mci_probe(struct dw_mci *host);
505 extern void dw_mci_remove(struct dw_mci *host);
506 #ifdef CONFIG_PM
507 extern int dw_mci_runtime_suspend(struct device *device);
508 extern int dw_mci_runtime_resume(struct device *device);
509 #endif
510
511 /**
512  * struct dw_mci_slot - MMC slot state
513  * @mmc: The mmc_host representing this slot.
514  * @host: The MMC controller this slot is using.
515  * @ctype: Card type for this slot.
516  * @mrq: mmc_request currently being processed or waiting to be
517  *      processed, or NULL when the slot is idle.
518  * @queue_node: List node for placing this node in the @queue list of
519  *      &struct dw_mci.
520  * @clock: Clock rate configured by set_ios(). Protected by host->lock.
521  * @__clk_old: The last clock value that was requested from core.
522  *      Keeping track of this helps us to avoid spamming the console.
523  * @flags: Random state bits associated with the slot.
524  * @id: Number of this slot.
525  * @sdio_id: Number of this slot in the SDIO interrupt registers.
526  */
527 struct dw_mci_slot {
528         struct mmc_host         *mmc;
529         struct dw_mci           *host;
530
531         u32                     ctype;
532
533         struct mmc_request      *mrq;
534         struct list_head        queue_node;
535
536         unsigned int            clock;
537         unsigned int            __clk_old;
538
539         unsigned long           flags;
540 #define DW_MMC_CARD_PRESENT     0
541 #define DW_MMC_CARD_NEED_INIT   1
542 #define DW_MMC_CARD_NO_LOW_PWR  2
543 #define DW_MMC_CARD_NO_USE_HOLD 3
544 #define DW_MMC_CARD_NEEDS_POLL  4
545         int                     id;
546         int                     sdio_id;
547 };
548
549 /**
550  * dw_mci driver data - dw-mshc implementation specific driver data.
551  * @caps: mmc subsystem specified capabilities of the controller(s).
552  * @num_caps: number of capabilities specified by @caps.
553  * @init: early implementation specific initialization.
554  * @set_ios: handle bus specific extensions.
555  * @parse_dt: parse implementation specific device tree properties.
556  * @execute_tuning: implementation specific tuning procedure.
557  *
558  * Provide controller implementation specific extensions. The usage of this
559  * data structure is fully optional and usage of each member in this structure
560  * is optional as well.
561  */
562 struct dw_mci_drv_data {
563         unsigned long   *caps;
564         u32             num_caps;
565         int             (*init)(struct dw_mci *host);
566         void            (*set_ios)(struct dw_mci *host, struct mmc_ios *ios);
567         int             (*parse_dt)(struct dw_mci *host);
568         int             (*execute_tuning)(struct dw_mci_slot *slot, u32 opcode);
569         int             (*prepare_hs400_tuning)(struct dw_mci *host,
570                                                 struct mmc_ios *ios);
571         int             (*switch_voltage)(struct mmc_host *mmc,
572                                           struct mmc_ios *ios);
573 };
574 #endif /* _DW_MMC_H_ */