Merge remote-tracking branch 'regulator/topic/tps65218' into regulator-next
[linux-2.6-microblaze.git] / drivers / mmc / host / dw_mmc-k3.c
1 /*
2  * Copyright (c) 2013 Linaro Ltd.
3  * Copyright (c) 2013 Hisilicon Limited.
4  *
5  * This program is free software; you can redistribute it and/or modify
6  * it under the terms of the GNU General Public License as published by
7  * the Free Software Foundation; either version 2 of the License, or
8  * (at your option) any later version.
9  */
10
11 #include <linux/bitops.h>
12 #include <linux/bitfield.h>
13 #include <linux/clk.h>
14 #include <linux/mfd/syscon.h>
15 #include <linux/mmc/host.h>
16 #include <linux/module.h>
17 #include <linux/of_address.h>
18 #include <linux/platform_device.h>
19 #include <linux/pm_runtime.h>
20 #include <linux/regmap.h>
21 #include <linux/regulator/consumer.h>
22
23 #include "dw_mmc.h"
24 #include "dw_mmc-pltfm.h"
25
26 /*
27  * hi6220 sd only support io voltage 1.8v and 3v
28  * Also need config AO_SCTRL_SEL18 accordingly
29  */
30 #define AO_SCTRL_SEL18          BIT(10)
31 #define AO_SCTRL_CTRL3          0x40C
32
33 #define DWMMC_SDIO_ID 2
34
35 #define SOC_SCTRL_SCPERCTRL5    (0x314)
36 #define SDCARD_IO_SEL18         BIT(2)
37
38 #define SDCARD_RD_THRESHOLD  (512)
39
40 #define GENCLK_DIV (7)
41
42 #define GPIO_CLK_ENABLE                   BIT(16)
43 #define GPIO_CLK_DIV_MASK                 GENMASK(11, 8)
44 #define GPIO_USE_SAMPLE_DLY_MASK          GENMASK(13, 13)
45 #define UHS_REG_EXT_SAMPLE_PHASE_MASK     GENMASK(20, 16)
46 #define UHS_REG_EXT_SAMPLE_DRVPHASE_MASK  GENMASK(25, 21)
47 #define UHS_REG_EXT_SAMPLE_DLY_MASK       GENMASK(30, 26)
48
49 #define TIMING_MODE     3
50 #define TIMING_CFG_NUM 10
51
52 #define NUM_PHASES (40)
53
54 #define ENABLE_SHIFT_MIN_SMPL (4)
55 #define ENABLE_SHIFT_MAX_SMPL (12)
56 #define USE_DLY_MIN_SMPL (11)
57 #define USE_DLY_MAX_SMPL (14)
58
59 struct k3_priv {
60         int ctrl_id;
61         u32 cur_speed;
62         struct regmap   *reg;
63 };
64
65 static unsigned long dw_mci_hi6220_caps[] = {
66         MMC_CAP_CMD23,
67         MMC_CAP_CMD23,
68         0
69 };
70
71 struct hs_timing {
72         u32 drv_phase;
73         u32 smpl_dly;
74         u32 smpl_phase_max;
75         u32 smpl_phase_min;
76 };
77
78 static struct hs_timing hs_timing_cfg[TIMING_MODE][TIMING_CFG_NUM] = {
79         { /* reserved */ },
80         { /* SD */
81                 {7, 0, 15, 15,},  /* 0: LEGACY 400k */
82                 {6, 0,  4,  4,},  /* 1: MMC_HS */
83                 {6, 0,  3,  3,},  /* 2: SD_HS */
84                 {6, 0, 15, 15,},  /* 3: SDR12 */
85                 {6, 0,  2,  2,},  /* 4: SDR25 */
86                 {4, 0, 11,  0,},  /* 5: SDR50 */
87                 {6, 4, 15,  0,},  /* 6: SDR104 */
88                 {0},              /* 7: DDR50 */
89                 {0},              /* 8: DDR52 */
90                 {0},              /* 9: HS200 */
91         },
92         { /* SDIO */
93                 {7, 0, 15, 15,},  /* 0: LEGACY 400k */
94                 {0},              /* 1: MMC_HS */
95                 {6, 0, 15, 15,},  /* 2: SD_HS */
96                 {6, 0, 15, 15,},  /* 3: SDR12 */
97                 {6, 0,  0,  0,},  /* 4: SDR25 */
98                 {4, 0, 12,  0,},  /* 5: SDR50 */
99                 {5, 4, 15,  0,},  /* 6: SDR104 */
100                 {0},              /* 7: DDR50 */
101                 {0},              /* 8: DDR52 */
102                 {0},              /* 9: HS200 */
103         }
104 };
105
106 static void dw_mci_k3_set_ios(struct dw_mci *host, struct mmc_ios *ios)
107 {
108         int ret;
109
110         ret = clk_set_rate(host->ciu_clk, ios->clock);
111         if (ret)
112                 dev_warn(host->dev, "failed to set rate %uHz\n", ios->clock);
113
114         host->bus_hz = clk_get_rate(host->ciu_clk);
115 }
116
117 static const struct dw_mci_drv_data k3_drv_data = {
118         .set_ios                = dw_mci_k3_set_ios,
119 };
120
121 static int dw_mci_hi6220_parse_dt(struct dw_mci *host)
122 {
123         struct k3_priv *priv;
124
125         priv = devm_kzalloc(host->dev, sizeof(*priv), GFP_KERNEL);
126         if (!priv)
127                 return -ENOMEM;
128
129         priv->reg = syscon_regmap_lookup_by_phandle(host->dev->of_node,
130                                          "hisilicon,peripheral-syscon");
131         if (IS_ERR(priv->reg))
132                 priv->reg = NULL;
133
134         priv->ctrl_id = of_alias_get_id(host->dev->of_node, "mshc");
135         if (priv->ctrl_id < 0)
136                 priv->ctrl_id = 0;
137
138         host->priv = priv;
139         return 0;
140 }
141
142 static int dw_mci_hi6220_switch_voltage(struct mmc_host *mmc, struct mmc_ios *ios)
143 {
144         struct dw_mci_slot *slot = mmc_priv(mmc);
145         struct k3_priv *priv;
146         struct dw_mci *host;
147         int min_uv, max_uv;
148         int ret;
149
150         host = slot->host;
151         priv = host->priv;
152
153         if (!priv || !priv->reg)
154                 return 0;
155
156         if (ios->signal_voltage == MMC_SIGNAL_VOLTAGE_330) {
157                 ret = regmap_update_bits(priv->reg, AO_SCTRL_CTRL3,
158                                          AO_SCTRL_SEL18, 0);
159                 min_uv = 3000000;
160                 max_uv = 3000000;
161         } else if (ios->signal_voltage == MMC_SIGNAL_VOLTAGE_180) {
162                 ret = regmap_update_bits(priv->reg, AO_SCTRL_CTRL3,
163                                          AO_SCTRL_SEL18, AO_SCTRL_SEL18);
164                 min_uv = 1800000;
165                 max_uv = 1800000;
166         } else {
167                 dev_dbg(host->dev, "voltage not supported\n");
168                 return -EINVAL;
169         }
170
171         if (ret) {
172                 dev_dbg(host->dev, "switch voltage failed\n");
173                 return ret;
174         }
175
176         if (IS_ERR_OR_NULL(mmc->supply.vqmmc))
177                 return 0;
178
179         ret = regulator_set_voltage(mmc->supply.vqmmc, min_uv, max_uv);
180         if (ret) {
181                 dev_dbg(host->dev, "Regulator set error %d: %d - %d\n",
182                                  ret, min_uv, max_uv);
183                 return ret;
184         }
185
186         return 0;
187 }
188
189 static void dw_mci_hi6220_set_ios(struct dw_mci *host, struct mmc_ios *ios)
190 {
191         int ret;
192         unsigned int clock;
193
194         clock = (ios->clock <= 25000000) ? 25000000 : ios->clock;
195
196         ret = clk_set_rate(host->biu_clk, clock);
197         if (ret)
198                 dev_warn(host->dev, "failed to set rate %uHz\n", clock);
199
200         host->bus_hz = clk_get_rate(host->biu_clk);
201 }
202
203 static int dw_mci_hi6220_execute_tuning(struct dw_mci_slot *slot, u32 opcode)
204 {
205         return 0;
206 }
207
208 static const struct dw_mci_drv_data hi6220_data = {
209         .caps                   = dw_mci_hi6220_caps,
210         .switch_voltage         = dw_mci_hi6220_switch_voltage,
211         .set_ios                = dw_mci_hi6220_set_ios,
212         .parse_dt               = dw_mci_hi6220_parse_dt,
213         .execute_tuning         = dw_mci_hi6220_execute_tuning,
214 };
215
216 static void dw_mci_hs_set_timing(struct dw_mci *host, int timing,
217                                      int smpl_phase)
218 {
219         u32 drv_phase;
220         u32 smpl_dly;
221         u32 use_smpl_dly = 0;
222         u32 enable_shift = 0;
223         u32 reg_value;
224         int ctrl_id;
225         struct k3_priv *priv;
226
227         priv = host->priv;
228         ctrl_id = priv->ctrl_id;
229
230         drv_phase = hs_timing_cfg[ctrl_id][timing].drv_phase;
231         smpl_dly   = hs_timing_cfg[ctrl_id][timing].smpl_dly;
232         if (smpl_phase == -1)
233                 smpl_phase = (hs_timing_cfg[ctrl_id][timing].smpl_phase_max +
234                              hs_timing_cfg[ctrl_id][timing].smpl_phase_min) / 2;
235
236         switch (timing) {
237         case MMC_TIMING_UHS_SDR104:
238                 if (smpl_phase >= USE_DLY_MIN_SMPL &&
239                                 smpl_phase <= USE_DLY_MAX_SMPL)
240                         use_smpl_dly = 1;
241                         /* fallthrough */
242         case MMC_TIMING_UHS_SDR50:
243                 if (smpl_phase >= ENABLE_SHIFT_MIN_SMPL &&
244                                 smpl_phase <= ENABLE_SHIFT_MAX_SMPL)
245                         enable_shift = 1;
246                 break;
247         }
248
249         mci_writel(host, GPIO, 0x0);
250         usleep_range(5, 10);
251
252         reg_value = FIELD_PREP(UHS_REG_EXT_SAMPLE_PHASE_MASK, smpl_phase) |
253                     FIELD_PREP(UHS_REG_EXT_SAMPLE_DLY_MASK, smpl_dly) |
254                     FIELD_PREP(UHS_REG_EXT_SAMPLE_DRVPHASE_MASK, drv_phase);
255         mci_writel(host, UHS_REG_EXT, reg_value);
256
257         mci_writel(host, ENABLE_SHIFT, enable_shift);
258
259         reg_value = FIELD_PREP(GPIO_CLK_DIV_MASK, GENCLK_DIV) |
260                              FIELD_PREP(GPIO_USE_SAMPLE_DLY_MASK, use_smpl_dly);
261         mci_writel(host, GPIO, (unsigned int)reg_value | GPIO_CLK_ENABLE);
262
263         /* We should delay 1ms wait for timing setting finished. */
264         usleep_range(1000, 2000);
265 }
266
267 static int dw_mci_hi3660_init(struct dw_mci *host)
268 {
269         mci_writel(host, CDTHRCTL, SDMMC_SET_THLD(SDCARD_RD_THRESHOLD,
270                     SDMMC_CARD_RD_THR_EN));
271
272         dw_mci_hs_set_timing(host, MMC_TIMING_LEGACY, -1);
273         host->bus_hz /= (GENCLK_DIV + 1);
274
275         return 0;
276 }
277
278 static int dw_mci_set_sel18(struct dw_mci *host, bool set)
279 {
280         int ret;
281         unsigned int val;
282         struct k3_priv *priv;
283
284         priv = host->priv;
285
286         val = set ? SDCARD_IO_SEL18 : 0;
287         ret = regmap_update_bits(priv->reg, SOC_SCTRL_SCPERCTRL5,
288                                  SDCARD_IO_SEL18, val);
289         if (ret) {
290                 dev_err(host->dev, "sel18 %u error\n", val);
291                 return ret;
292         }
293
294         return 0;
295 }
296
297 static void dw_mci_hi3660_set_ios(struct dw_mci *host, struct mmc_ios *ios)
298 {
299         int ret;
300         unsigned long wanted;
301         unsigned long actual;
302         struct k3_priv *priv = host->priv;
303
304         if (!ios->clock || ios->clock == priv->cur_speed)
305                 return;
306
307         wanted = ios->clock * (GENCLK_DIV + 1);
308         ret = clk_set_rate(host->ciu_clk, wanted);
309         if (ret) {
310                 dev_err(host->dev, "failed to set rate %luHz\n", wanted);
311                 return;
312         }
313         actual = clk_get_rate(host->ciu_clk);
314
315         dw_mci_hs_set_timing(host, ios->timing, -1);
316         host->bus_hz = actual / (GENCLK_DIV + 1);
317         host->current_speed = 0;
318         priv->cur_speed = host->bus_hz;
319 }
320
321 static int dw_mci_get_best_clksmpl(unsigned int sample_flag)
322 {
323         int i;
324         int interval;
325         unsigned int v;
326         unsigned int len;
327         unsigned int range_start = 0;
328         unsigned int range_length = 0;
329         unsigned int middle_range = 0;
330
331         if (!sample_flag)
332                 return -EIO;
333
334         if (~sample_flag == 0)
335                 return 0;
336
337         i = ffs(sample_flag) - 1;
338
339         /*
340         * A clock cycle is divided into 32 phases,
341         * each of which is represented by a bit,
342         * finding the optimal phase.
343         */
344         while (i < 32) {
345                 v = ror32(sample_flag, i);
346                 len = ffs(~v) - 1;
347
348                 if (len > range_length) {
349                         range_length = len;
350                         range_start = i;
351                 }
352
353                 interval = ffs(v >> len) - 1;
354                 if (interval < 0)
355                         break;
356
357                 i += len + interval;
358         }
359
360         middle_range = range_start + range_length / 2;
361         if (middle_range >= 32)
362                 middle_range %= 32;
363
364         return middle_range;
365 }
366
367 static int dw_mci_hi3660_execute_tuning(struct dw_mci_slot *slot, u32 opcode)
368 {
369         int i = 0;
370         struct dw_mci *host = slot->host;
371         struct mmc_host *mmc = slot->mmc;
372         int smpl_phase = 0;
373         u32 tuning_sample_flag = 0;
374         int best_clksmpl = 0;
375
376         for (i = 0; i < NUM_PHASES; ++i, ++smpl_phase) {
377                 smpl_phase %= 32;
378
379                 mci_writel(host, TMOUT, ~0);
380                 dw_mci_hs_set_timing(host, mmc->ios.timing, smpl_phase);
381
382                 if (!mmc_send_tuning(mmc, opcode, NULL))
383                         tuning_sample_flag |= (1 << smpl_phase);
384                 else
385                         tuning_sample_flag &= ~(1 << smpl_phase);
386         }
387
388         best_clksmpl = dw_mci_get_best_clksmpl(tuning_sample_flag);
389         if (best_clksmpl < 0) {
390                 dev_err(host->dev, "All phases bad!\n");
391                 return -EIO;
392         }
393
394         dw_mci_hs_set_timing(host, mmc->ios.timing, best_clksmpl);
395
396         dev_info(host->dev, "tuning ok best_clksmpl %u tuning_sample_flag %x\n",
397                  best_clksmpl, tuning_sample_flag);
398         return 0;
399 }
400
401 static int dw_mci_hi3660_switch_voltage(struct mmc_host *mmc,
402                                         struct mmc_ios *ios)
403 {
404         int ret = 0;
405         struct dw_mci_slot *slot = mmc_priv(mmc);
406         struct k3_priv *priv;
407         struct dw_mci *host;
408
409         host = slot->host;
410         priv = host->priv;
411
412         if (!priv || !priv->reg)
413                 return 0;
414
415         if (priv->ctrl_id == DWMMC_SDIO_ID)
416                 return 0;
417
418         if (ios->signal_voltage == MMC_SIGNAL_VOLTAGE_330)
419                 ret = dw_mci_set_sel18(host, 0);
420         else if (ios->signal_voltage == MMC_SIGNAL_VOLTAGE_180)
421                 ret = dw_mci_set_sel18(host, 1);
422         if (ret)
423                 return ret;
424
425         if (!IS_ERR(mmc->supply.vqmmc)) {
426                 ret = mmc_regulator_set_vqmmc(mmc, ios);
427                 if (ret) {
428                         dev_err(host->dev, "Regulator set error %d\n", ret);
429                         return ret;
430                 }
431         }
432
433         return 0;
434 }
435
436 static const struct dw_mci_drv_data hi3660_data = {
437         .init = dw_mci_hi3660_init,
438         .set_ios = dw_mci_hi3660_set_ios,
439         .parse_dt = dw_mci_hi6220_parse_dt,
440         .execute_tuning = dw_mci_hi3660_execute_tuning,
441         .switch_voltage  = dw_mci_hi3660_switch_voltage,
442 };
443
444 static const struct of_device_id dw_mci_k3_match[] = {
445         { .compatible = "hisilicon,hi3660-dw-mshc", .data = &hi3660_data, },
446         { .compatible = "hisilicon,hi4511-dw-mshc", .data = &k3_drv_data, },
447         { .compatible = "hisilicon,hi6220-dw-mshc", .data = &hi6220_data, },
448         {},
449 };
450 MODULE_DEVICE_TABLE(of, dw_mci_k3_match);
451
452 static int dw_mci_k3_probe(struct platform_device *pdev)
453 {
454         const struct dw_mci_drv_data *drv_data;
455         const struct of_device_id *match;
456
457         match = of_match_node(dw_mci_k3_match, pdev->dev.of_node);
458         drv_data = match->data;
459
460         return dw_mci_pltfm_register(pdev, drv_data);
461 }
462
463 static const struct dev_pm_ops dw_mci_k3_dev_pm_ops = {
464         SET_SYSTEM_SLEEP_PM_OPS(pm_runtime_force_suspend,
465                                 pm_runtime_force_resume)
466         SET_RUNTIME_PM_OPS(dw_mci_runtime_suspend,
467                            dw_mci_runtime_resume,
468                            NULL)
469 };
470
471 static struct platform_driver dw_mci_k3_pltfm_driver = {
472         .probe          = dw_mci_k3_probe,
473         .remove         = dw_mci_pltfm_remove,
474         .driver         = {
475                 .name           = "dwmmc_k3",
476                 .of_match_table = dw_mci_k3_match,
477                 .pm             = &dw_mci_k3_dev_pm_ops,
478         },
479 };
480
481 module_platform_driver(dw_mci_k3_pltfm_driver);
482
483 MODULE_DESCRIPTION("K3 Specific DW-MSHC Driver Extension");
484 MODULE_LICENSE("GPL v2");
485 MODULE_ALIAS("platform:dwmmc_k3");