2 # MMC/SD host controller drivers
5 comment "MMC/SD/SDIO Host Controller Drivers"
8 bool "MMC host drivers debugging"
11 This is an option for use by developers; most people should
12 say N here. This enables MMC host driver debugging. And further
13 added host drivers please don't invent their private macro for
17 tristate "ARM AMBA Multimedia Card Interface support"
20 This selects the ARM(R) AMBA(R) PrimeCell Multimedia Card
21 Interface (PL180 and PL181) support. If you have an ARM(R)
22 platform with a Multimedia Card slot, say Y or M here.
27 bool "Qualcomm Data Mover for SD Card Controller"
28 depends on MMC_ARMMMCI && QCOM_BAM_DMA
31 This selects the Qualcomm Data Mover lite/local on SD Card controller.
32 This option will enable the dma to work correctly, if you are using
33 Qcom SOCs and MMC, you would probably need this option to get DMA working.
38 tristate "Intel PXA25x/26x/27x Multimedia Card Interface support"
41 This selects the Intel(R) PXA(R) Multimedia card Interface.
42 If you have a PXA(R) platform with a Multimedia Card slot,
48 tristate "Secure Digital Host Controller Interface support"
51 This selects the generic Secure Digital Host Controller Interface.
52 It is used by manufacturers such as Texas Instruments(R), Ricoh(R)
53 and Toshiba(R). Most controllers found in laptops are of this type.
55 If you have a controller with this interface, say Y or M here. You
56 also need to enable an appropriate bus interface.
60 config MMC_SDHCI_IO_ACCESSORS
64 This is silent Kconfig symbol that is selected by the drivers that
65 need to overwrite SDHCI IO memory accessors.
67 config MMC_SDHCI_BIG_ENDIAN_32BIT_BYTE_SWAPPER
70 select MMC_SDHCI_IO_ACCESSORS
72 This option is selected by drivers running on big endian hosts
73 and performing I/O to a SDHCI controller through a bus that
74 implements a hardware byte swapper using a 32-bit datum.
75 This endian mapping mode is called "data invariance" and
76 has the effect of scrambling the addresses and formats of data
77 accessed in sizes other than the datum size.
79 This is the case for the Nintendo Wii SDHCI.
82 tristate "SDHCI support on PCI bus"
83 depends on MMC_SDHCI && PCI
86 This selects the PCI Secure Digital Host Controller Interface.
87 Most controllers found today are PCI devices.
89 If you have a controller with this interface, say Y or M here.
94 bool "Ricoh MMC Controller Disabler"
95 depends on MMC_SDHCI_PCI
98 This adds a pci quirk to disable Ricoh MMC Controller. This
99 proprietary controller is unnecessary because the SDHCI driver
100 supports MMC cards on the SD controller, but if it is not
101 disabled, it will steal the MMC cards away - rendering them
102 useless. It is safe to select this even if you don't
103 have a Ricoh based card reader.
107 config MMC_SDHCI_ACPI
108 tristate "SDHCI support for ACPI enumerated SDHCI controllers"
109 depends on MMC_SDHCI && ACPI
110 select IOSF_MBI if X86
112 This selects support for ACPI enumerated SDHCI controllers,
113 identified by ACPI Compatibility ID PNP0D40 or specific
116 If you have a controller with this interface, say Y or M here.
120 config MMC_SDHCI_PLTFM
121 tristate "SDHCI platform and OF driver helper"
124 This selects the common helper functions support for Secure Digital
125 Host Controller Interface based platform and OF drivers.
127 If you have a controller with this interface, say Y or M here.
131 config MMC_SDHCI_OF_ARASAN
132 tristate "SDHCI OF support for the Arasan SDHCI controllers"
133 depends on MMC_SDHCI_PLTFM
135 depends on COMMON_CLK
138 This selects the Arasan Secure Digital Host Controller Interface
139 (SDHCI). This hardware is found e.g. in Xilinx' Zynq SoC.
141 If you have a controller with this interface, say Y or M here.
145 config MMC_SDHCI_OF_AT91
146 tristate "SDHCI OF support for the Atmel SDMMC controller"
147 depends on MMC_SDHCI_PLTFM
150 This selects the Atmel SDMMC driver
152 config MMC_SDHCI_OF_ESDHC
153 tristate "SDHCI OF support for the Freescale eSDHC controller"
154 depends on MMC_SDHCI_PLTFM
155 depends on PPC || ARCH_MXC || ARCH_LAYERSCAPE
156 select MMC_SDHCI_IO_ACCESSORS
159 This selects the Freescale eSDHC controller support.
161 If you have a controller with this interface, say Y or M here.
165 config MMC_SDHCI_OF_HLWD
166 tristate "SDHCI OF support for the Nintendo Wii SDHCI controllers"
167 depends on MMC_SDHCI_PLTFM
169 select MMC_SDHCI_BIG_ENDIAN_32BIT_BYTE_SWAPPER
171 This selects the Secure Digital Host Controller Interface (SDHCI)
172 found in the "Hollywood" chipset of the Nintendo Wii video game
175 If you have a controller with this interface, say Y or M here.
179 config MMC_SDHCI_CADENCE
180 tristate "SDHCI support for the Cadence SD/SDIO/eMMC controller"
181 depends on MMC_SDHCI_PLTFM
184 This selects the Cadence SD/SDIO/eMMC driver.
186 If you have a controller with this interface, say Y or M here.
190 config MMC_SDHCI_CNS3XXX
191 tristate "SDHCI support on the Cavium Networks CNS3xxx SoC"
192 depends on ARCH_CNS3XXX
193 depends on MMC_SDHCI_PLTFM
195 This selects the SDHCI support for CNS3xxx System-on-Chip devices.
197 If you have a controller with this interface, say Y or M here.
201 config MMC_SDHCI_ESDHC_IMX
202 tristate "SDHCI support for the Freescale eSDHC/uSDHC i.MX controller"
204 depends on MMC_SDHCI_PLTFM
205 select MMC_SDHCI_IO_ACCESSORS
207 This selects the Freescale eSDHC/uSDHC controller support
208 found on i.MX25, i.MX35 i.MX5x and i.MX6x.
210 If you have a controller with this interface, say Y or M here.
214 config MMC_SDHCI_DOVE
215 tristate "SDHCI support on Marvell's Dove SoC"
216 depends on ARCH_DOVE || MACH_DOVE
217 depends on MMC_SDHCI_PLTFM
218 select MMC_SDHCI_IO_ACCESSORS
220 This selects the Secure Digital Host Controller Interface in
223 If you have a controller with this interface, say Y or M here.
227 config MMC_SDHCI_TEGRA
228 tristate "SDHCI platform support for the Tegra SD/MMC Controller"
229 depends on ARCH_TEGRA
230 depends on MMC_SDHCI_PLTFM
231 select MMC_SDHCI_IO_ACCESSORS
233 This selects the Tegra SD/MMC controller. If you have a Tegra
234 platform with SD or MMC devices, say Y or M here.
239 tristate "SDHCI support on Samsung S3C SoC"
240 depends on MMC_SDHCI && PLAT_SAMSUNG
242 This selects the Secure Digital Host Controller Interface (SDHCI)
243 often referrered to as the HSMMC block in some of the Samsung S3C
246 If you have a controller with this interface, say Y or M here.
250 config MMC_SDHCI_SIRF
251 tristate "SDHCI support on CSR SiRFprimaII and SiRFmarco SoCs"
253 depends on MMC_SDHCI_PLTFM
254 select MMC_SDHCI_IO_ACCESSORS
256 This selects the SDHCI support for SiRF System-on-Chip devices.
258 If you have a controller with this interface, say Y or M here.
262 config MMC_SDHCI_PXAV3
263 tristate "Marvell MMP2 SD Host Controller support (PXAV3)"
264 depends on CLKDEV_LOOKUP
265 depends on MMC_SDHCI_PLTFM
266 depends on ARCH_BERLIN || ARCH_MMP || ARCH_MVEBU || COMPILE_TEST
269 This selects the Marvell(R) PXAV3 SD Host Controller.
270 If you have a MMP2 platform with SD Host Controller
271 and a card slot, say Y or M here.
275 config MMC_SDHCI_PXAV2
276 tristate "Marvell PXA9XX SD Host Controller support (PXAV2)"
277 depends on CLKDEV_LOOKUP
278 depends on MMC_SDHCI_PLTFM
279 depends on ARCH_MMP || COMPILE_TEST
282 This selects the Marvell(R) PXAV2 SD Host Controller.
283 If you have a PXA9XX platform with SD Host Controller
284 and a card slot, say Y or M here.
288 config MMC_SDHCI_SPEAR
289 tristate "SDHCI support on ST SPEAr platform"
290 depends on MMC_SDHCI && PLAT_SPEAR
293 This selects the Secure Digital Host Controller Interface (SDHCI)
294 often referrered to as the HSMMC block in some of the ST SPEAR range
297 If you have a controller with this interface, say Y or M here.
301 config MMC_SDHCI_S3C_DMA
302 bool "DMA support on S3C SDHCI"
303 depends on MMC_SDHCI_S3C
305 Enable DMA support on the Samsung S3C SDHCI glue. The DMA
306 has proved to be problematic if the controller encounters
307 certain errors, and thus should be treated with care.
311 config MMC_SDHCI_BCM_KONA
312 tristate "SDHCI support on Broadcom KONA platform"
313 depends on ARCH_BCM_MOBILE
314 depends on MMC_SDHCI_PLTFM
316 This selects the Broadcom Kona Secure Digital Host Controller
317 Interface(SDHCI) support.
318 This is used in Broadcom mobile SoCs.
320 If you have a controller with this interface, say Y or M here.
322 config MMC_SDHCI_F_SDH30
323 tristate "SDHCI support for Fujitsu Semiconductor F_SDH30"
324 depends on MMC_SDHCI_PLTFM
325 depends on OF || ACPI
327 This selects the Secure Digital Host Controller Interface (SDHCI)
328 Needed by some Fujitsu SoC for MMC / SD / SDIO support.
329 If you have a controller with this interface, say Y or M here.
333 config MMC_SDHCI_IPROC
334 tristate "SDHCI support for the BCM2835 & iProc SD/MMC Controller"
335 depends on ARCH_BCM2835 || ARCH_BCM_IPROC || COMPILE_TEST
336 depends on MMC_SDHCI_PLTFM
337 default ARCH_BCM_IPROC
338 select MMC_SDHCI_IO_ACCESSORS
340 This selects the iProc SD/MMC controller.
342 If you have a BCM2835 or IPROC platform with SD or MMC devices,
348 tristate "Amlogic S905/GX* SD/MMC Host Controller support"
349 depends on ARCH_MESON && MMC
351 This selects support for the Amlogic SD/MMC Host Controller
352 found on the S905/GX* family of SoCs. This controller is
353 MMC 5.1 compliant and supports SD, eMMC and SDIO interfaces.
355 If you have a controller with this interface, say Y here.
357 config MMC_MESON_MX_SDIO
358 tristate "Amlogic Meson6/Meson8/Meson8b SD/MMC Host Controller support"
359 depends on ARCH_MESON || COMPILE_TEST
360 depends on COMMON_CLK
364 This selects support for the SD/MMC Host Controller on
365 Amlogic Meson6, Meson8 and Meson8b SoCs.
367 If you have a controller with this interface, say Y or M here.
371 tristate "MOXART SD/MMC Host Controller support"
372 depends on ARCH_MOXART && MMC
374 This selects support for the MOXART SD/MMC Host Controller.
375 MOXA provides one multi-functional card reader which can
376 be found on some embedded hardware such as UC-7112-LX.
377 If you have a controller with this interface, say Y here.
380 tristate "SDHCI support on STMicroelectronics SoC"
381 depends on ARCH_STI || FSP2
382 depends on MMC_SDHCI_PLTFM
383 select MMC_SDHCI_IO_ACCESSORS
385 This selects the Secure Digital Host Controller Interface in
386 STMicroelectronics SoCs.
388 If you have a controller with this interface, say Y or M here.
392 tristate "TI OMAP Multimedia Card Interface support"
394 depends on TPS65010 || !MACH_OMAP_H2
396 This selects the TI OMAP Multimedia card Interface.
397 If you have an OMAP board with a Multimedia Card slot,
403 tristate "TI OMAP High Speed Multimedia Card Interface support"
405 depends on ARCH_OMAP2PLUS || ARCH_KEYSTONE || COMPILE_TEST
407 This selects the TI OMAP High Speed Multimedia card Interface.
408 If you have an omap2plus board with a Multimedia Card slot,
414 tristate "Winbond W83L51xD SD/MMC Card Interface support"
415 depends on ISA_DMA_API
417 This selects the Winbond(R) W83L51xD Secure digital and
418 Multimedia card Interface.
419 If you have a machine with a integrated W83L518D or W83L519D
420 SD/MMC card reader, say Y or M here.
425 tristate "Alchemy AU1XX0 MMC Card Interface support"
426 depends on MIPS_ALCHEMY
428 This selects the AMD Alchemy(R) Multimedia card interface.
429 If you have a Alchemy platform with a MMC slot, say Y or M here.
434 tristate "Atmel SD/MMC Driver (Multimedia Card Interface)"
437 This selects the Atmel Multimedia Card Interface driver.
438 If you have an AT91 platform with a Multimedia Card slot,
444 tristate "Qualcomm SDHCI Controller Support"
445 depends on ARCH_QCOM || (ARM && COMPILE_TEST)
446 depends on MMC_SDHCI_PLTFM
447 select MMC_SDHCI_IO_ACCESSORS
449 This selects the Secure Digital Host Controller Interface (SDHCI)
450 support present in Qualcomm SOCs. The controller supports
453 If you have a controller with this interface, say Y or M here.
458 tristate "Freescale i.MX21/27/31 or MPC512x Multimedia Card support"
459 depends on ARCH_MXC || PPC_MPC512x
461 This selects the Freescale i.MX21, i.MX27, i.MX31 or MPC512x
462 Multimedia Card Interface. If you have an i.MX or MPC512x platform
463 with a Multimedia Card slot, say Y or M here.
468 tristate "Freescale MXS Multimedia Card Interface support"
469 depends on ARCH_MXS && MXS_DMA
471 This selects the Freescale SSP MMC controller found on MXS based
472 platforms like mx23/28.
477 tristate "TI Flash Media MMC/SD Interface support"
481 Say Y here if you want to be able to access MMC/SD cards with
482 the Texas Instruments(R) Flash Media card reader, found in many
484 This option 'selects' (turns on, enables) 'TIFM_CORE', but you
485 probably also need appropriate card reader host adapter, such as
486 'Misc devices: TI Flash Media PCI74xx/PCI76xx host adapter support
489 To compile this driver as a module, choose M here: the
490 module will be called tifm_sd.
493 tristate "Marvell MMC/SD/SDIO host driver"
494 depends on PLAT_ORION
497 This selects the Marvell SDIO host driver.
498 SDIO may currently be found on the Kirkwood 88F6281 and 88F6192
501 To compile this driver as a module, choose M here: the
502 module will be called mvsdio.
505 tristate "TI DAVINCI Multimedia Card Interface support"
506 depends on ARCH_DAVINCI
508 This selects the TI DAVINCI Multimedia card Interface.
509 If you have an DAVINCI board with a Multimedia Card slot,
510 say Y or M here. If unsure, say N.
513 tristate "goldfish qemu Multimedia Card Interface support"
515 depends on GOLDFISH || COMPILE_TEST
517 This selects the Goldfish Multimedia card Interface emulation
518 found on the Goldfish Android virtual device emulation.
521 tristate "MMC/SD/SDIO over SPI"
522 depends on SPI_MASTER && HAS_DMA
526 Some systems access MMC/SD/SDIO cards using a SPI controller
527 instead of using a "native" MMC/SD/SDIO controller. This has a
528 disadvantage of being relatively high overhead, but a compensating
529 advantage of working on many systems without dedicated MMC/SD/SDIO
532 If unsure, or if your system has no SPI master driver, say N.
535 tristate "Samsung S3C SD/MMC Card Interface support"
536 depends on ARCH_S3C24XX
537 depends on S3C24XX_DMAC
539 This selects a driver for the MCI interface found in
540 Samsung's S3C2410, S3C2412, S3C2440, S3C2442 CPUs.
541 If you have a board based on one of those and a MMC/SD
542 slot, say Y or M here.
546 config MMC_S3C_HW_SDIO_IRQ
547 bool "Hardware support for SDIO IRQ"
550 Enable the hardware support for SDIO interrupts instead of using
551 the generic polling code.
554 prompt "Samsung S3C SD/MMC transfer code"
558 bool "Use PIO transfers only"
560 Use PIO to transfer data between memory and the hardware.
562 PIO is slower than DMA as it requires CPU instructions to
563 move the data. This has been the traditional default for
567 bool "Use DMA transfers only"
569 Use DMA to transfer data between memory and the hardare.
571 Currently, the DMA support in this driver seems to not be
572 working properly and needs to be debugged before this
577 config MMC_SDRICOH_CS
578 tristate "MMC/SD driver for Ricoh Bay1Controllers"
579 depends on PCI && PCMCIA
581 Say Y here if your Notebook reports a Ricoh Bay1Controller PCMCIA
582 card whenever you insert a MMC or SD card into the card slot.
584 To compile this driver as a module, choose M here: the
585 module will be called sdricoh_cs.
591 tristate "Toshiba Mobile IO Controller (TMIO) MMC/SD function support"
592 depends on MFD_TMIO || MFD_ASIC3
595 This provides support for the SD/MMC cell found in TC6393XB,
596 T7L66XB and also HTC ASIC3
599 tristate "Renesas SDHI SD/SDIO controller support"
600 depends on SUPERH || ARCH_RENESAS || COMPILE_TEST
603 This provides support for the SDHI SD/SDIO controller found in
604 Renesas SuperH, ARM and ARM64 based SoCs
606 config MMC_SDHI_SYS_DMAC
607 tristate "DMA for SDHI SD/SDIO controllers using SYS-DMAC"
608 depends on MMC_SDHI && HAS_DMA
609 default MMC_SDHI if (SUPERH || ARM)
611 This provides DMA support for SDHI SD/SDIO controllers
612 using SYS-DMAC via DMA Engine. This supports the controllers
613 found in SuperH and Renesas ARM based SoCs.
615 config MMC_SDHI_INTERNAL_DMAC
616 tristate "DMA for SDHI SD/SDIO controllers using on-chip bus mastering"
617 depends on ARM64 || COMPILE_TEST
618 depends on MMC_SDHI && HAS_DMA
619 default MMC_SDHI if ARM64
621 This provides DMA support for SDHI SD/SDIO controllers
622 using on-chip bus mastering. This supports the controllers
623 found in arm64 based SoCs.
626 tristate "ENE CB710 MMC/SD Interface support"
630 This option enables support for MMC/SD part of ENE CB710/720 Flash
631 memory card reader found in some laptops (ie. some versions of
634 This driver can also be built as a module. If so, the module
635 will be called cb710-mmc.
638 tristate "VIA SD/MMC Card Reader Driver"
641 This selects the VIA SD/MMC Card Reader driver, say Y or M here.
642 VIA provides one multi-functional card reader which integrated into
643 some motherboards manufactured by VIA. This card reader supports
645 If you have a controller with this interface, say Y or M here.
649 config MMC_CAVIUM_OCTEON
650 tristate "Cavium OCTEON SD/MMC Card Interface support"
651 depends on CAVIUM_OCTEON_SOC
653 This selects Cavium OCTEON SD/MMC card Interface.
654 If you have an OCTEON board with a Multimedia Card slot,
659 config MMC_CAVIUM_THUNDERX
660 tristate "Cavium ThunderX SD/MMC Card Interface support"
661 depends on PCI && 64BIT && (ARM64 || COMPILE_TEST)
662 depends on GPIO_THUNDERX
663 depends on OF_ADDRESS
665 This selects Cavium ThunderX SD/MMC Card Interface.
666 If you have an Cavium ARM64 board with a Multimedia Card slot
667 or builtin eMMC chip say Y or M here. If built as a module
668 the module will be called thunderx_mmc.ko.
671 tristate "Synopsys DesignWare Memory Card Interface"
673 depends on ARC || ARM || ARM64 || MIPS || COMPILE_TEST
675 This selects support for the Synopsys DesignWare Mobile Storage IP
676 block, this provides host support for SD and MMC interfaces, in both
677 PIO, internal DMA mode and external DMA mode.
680 tristate "Synopsys Designware MCI Support as platform device"
684 This selects the common helper functions support for Host Controller
685 Interface based platform driver. Please select this option if the IP
686 is present as a platform device. This is the common interface for the
687 Synopsys Designware IP.
689 If you have a controller with this interface, say Y or M here.
694 tristate "Exynos specific extensions for Synopsys DW Memory Card Interface"
698 This selects support for Samsung Exynos SoC specific extensions to the
699 Synopsys DesignWare Memory Card Interface driver. Select this option
700 for platforms based on Exynos4 and Exynos5 SoC's.
702 config MMC_DW_HI3798CV200
703 tristate "Hi3798CV200 specific extensions for Synopsys DW Memory Card Interface"
707 This selects support for HiSilicon Hi3798CV200 SoC specific extensions to the
708 Synopsys DesignWare Memory Card Interface driver. Select this option
709 for platforms based on HiSilicon Hi3798CV200 SoC.
712 tristate "K3 specific extensions for Synopsys DW Memory Card Interface"
716 This selects support for Hisilicon K3 SoC specific extensions to the
717 Synopsys DesignWare Memory Card Interface driver. Select this option
718 for platforms based on Hisilicon K3 SoC's.
721 tristate "Synopsys Designware MCI support on PCI bus"
722 depends on MMC_DW && PCI
724 This selects the PCI bus for the Synopsys Designware Mobile Storage IP.
725 Select this option if the IP is present on PCI platform.
727 If you have a controller with this interface, say Y or M here.
731 config MMC_DW_ROCKCHIP
732 tristate "Rockchip specific extensions for Synopsys DW Memory Card Interface"
733 depends on MMC_DW && ARCH_ROCKCHIP
736 This selects support for Rockchip SoC specific extensions to the
737 Synopsys DesignWare Memory Card Interface driver. Select this option
738 for platforms based on RK3066, RK3188 and RK3288 SoC's.
741 tristate "ZTE specific extensions for Synopsys DW Memory Card Interface"
742 depends on MMC_DW && ARCH_ZX
745 This selects support for ZTE SoC specific extensions to the
746 Synopsys DesignWare Memory Card Interface driver. Select this option
747 for platforms based on ZX296718 SoC's.
750 tristate "SuperH Internal MMCIF support"
752 depends on SUPERH || ARCH_RENESAS || COMPILE_TEST
754 This selects the MMC Host Interface controller (MMCIF) found in various
755 Renesas SoCs for SH and ARM architectures.
759 tristate "JZ4740 SD/Multimedia Card Interface support"
760 depends on MACH_JZ4740
762 This selects support for the SD/MMC controller on Ingenic JZ4740
764 If you have a board based on such a SoC and with a SD/MMC slot,
768 tristate "VUB300 USB to SDIO/SD/MMC Host Controller support"
771 This selects support for Elan Digital Systems' VUB300 chip.
773 The VUB300 is a USB-SDIO Host Controller Interface chip
774 that enables the host computer to use SDIO/SD/MMC cards
775 via a USB 2.0 or USB 1.1 host.
777 The VUB300 chip will be found in both physically separate
778 USB to SDIO/SD/MMC adapters and embedded on some motherboards.
780 The VUB300 chip supports SD and MMC memory cards in addition
781 to single and multifunction SDIO cards.
783 Some SDIO cards will need a firmware file to be loaded and
784 sent to VUB300 chip in order to achieve better data throughput.
785 Download these "Offload Pseudocode" from Elan Digital Systems'
786 web-site http://www.elandigitalsystems.com/support/downloads.php
787 and put them in /lib/firmware. Note that without these additional
788 firmware files the VUB300 chip will still function, but not at
789 the best obtainable data rate.
791 To compile this mmc host controller driver as a module,
792 choose M here: the module will be called vub300.
794 If you have a computer with an embedded VUB300 chip
795 or if you intend connecting a USB adapter based on a
796 VUB300 chip say Y or M here.
799 tristate "USB SD Host Controller (USHC) support"
802 This selects support for USB SD Host Controllers based on
803 the Cypress Astoria chip with firmware compliant with CSR's
804 USB SD Host Controller specification (CS-118793-SP).
806 CSR boards with this device include: USB<>SDIO (M1985v2),
809 Note: These controllers only support SDIO cards and do not
810 support MMC or SD memory cards.
813 tristate "Wondermedia SD/MMC Host Controller support"
814 depends on ARCH_VT8500
817 This selects support for the SD/MMC Host Controller on
818 Wondermedia WM8505/WM8650 based SoCs.
820 To compile this driver as a module, choose M here: the
821 module will be called wmt-sdmmc.
823 config MMC_USDHI6ROL0
824 tristate "Renesas USDHI6ROL0 SD/SDIO Host Controller support"
827 This selects support for the Renesas USDHI6ROL0 SD/SDIO
830 config MMC_REALTEK_PCI
831 tristate "Realtek PCI-E SD/MMC Card Interface Driver"
832 depends on MISC_RTSX_PCI
834 Say Y here to include driver code to support SD/MMC card interface
835 of Realtek PCI-E card reader
837 config MMC_REALTEK_USB
838 tristate "Realtek USB SD/MMC Card Interface Driver"
839 depends on MISC_RTSX_USB
841 Say Y here to include driver code to support SD/MMC card interface
842 of Realtek RTS5129/39 series card reader
845 tristate "Allwinner sunxi SD/MMC Host Controller support"
846 depends on ARCH_SUNXI
848 This selects support for the SD/MMC Host Controller on
849 Allwinner sunxi SoCs.
852 tristate "Command Queue Host Controller Interface support"
855 This selects the Command Queue Host Controller Interface (CQHCI)
856 support present in host controllers of Qualcomm Technologies, Inc
858 This controller supports eMMC devices with command queue support.
860 If you have a controller with this interface, say Y or M here.
864 config MMC_TOSHIBA_PCI
865 tristate "Toshiba Type A SD/MMC Card Interface Driver"
869 tristate "Broadcom BCM2835 SDHOST MMC Controller support"
870 depends on ARCH_BCM2835 || COMPILE_TEST
873 This selects the BCM2835 SDHOST MMC controller. If you have
874 a BCM2835 platform with SD or MMC devices, say Y or M here.
876 Note that the BCM2835 has two SD controllers: The Arasan
877 sdhci controller (supported by MMC_SDHCI_IPROC) and a custom
878 sdhost controller (supported by this driver).
883 tristate "MediaTek SD/MMC Card Interface support"
886 This selects the MediaTek(R) Secure digital and Multimedia card Interface.
887 If you have a machine with a integrated SD/MMC card reader, say Y or M here.
888 This is needed if support for any SD/SDIO/MMC devices is required.
891 config MMC_SDHCI_MICROCHIP_PIC32
892 tristate "Microchip PIC32MZDA SDHCI support"
893 depends on MMC_SDHCI && PIC32MZDA && MMC_SDHCI_PLTFM
895 This selects the Secure Digital Host Controller Interface (SDHCI)
896 for PIC32MZDA platform.
898 If you have a controller with this interface, say Y or M here.
901 config MMC_SDHCI_BRCMSTB
902 tristate "Broadcom SDIO/SD/MMC support"
903 depends on ARCH_BRCMSTB || BMIPS_GENERIC
904 depends on MMC_SDHCI_PLTFM
907 This selects support for the SDIO/SD/MMC Host Controller on
912 config MMC_SDHCI_XENON
913 tristate "Marvell Xenon eMMC/SD/SDIO SDHCI driver"
914 depends on MMC_SDHCI_PLTFM
916 This selects Marvell Xenon eMMC/SD/SDIO SDHCI.
917 If you have a controller with this interface, say Y or M here.
920 config MMC_SDHCI_OMAP
921 tristate "TI SDHCI Controller Support"
922 depends on MMC_SDHCI_PLTFM && OF
924 This selects the Secure Digital Host Controller Interface (SDHCI)
925 support present in TI's DRA7 SOCs. The controller supports
928 If you have a controller with this interface, say Y or M here.