Merge remote-tracking branch 'spi/for-5.9' into spi-linus
[linux-2.6-microblaze.git] / drivers / mfd / rn5t618.c
1 // SPDX-License-Identifier: GPL-2.0-only
2 /*
3  * MFD core driver for Ricoh RN5T618 PMIC
4  *
5  * Copyright (C) 2014 Beniamino Galvani <b.galvani@gmail.com>
6  * Copyright (C) 2016 Toradex AG
7  */
8
9 #include <linux/delay.h>
10 #include <linux/i2c.h>
11 #include <linux/interrupt.h>
12 #include <linux/irq.h>
13 #include <linux/mfd/core.h>
14 #include <linux/mfd/rn5t618.h>
15 #include <linux/module.h>
16 #include <linux/of_device.h>
17 #include <linux/platform_device.h>
18 #include <linux/reboot.h>
19 #include <linux/regmap.h>
20
21 static const struct mfd_cell rn5t618_cells[] = {
22         { .name = "rn5t618-regulator" },
23         { .name = "rn5t618-wdt" },
24 };
25
26 static const struct mfd_cell rc5t619_cells[] = {
27         { .name = "rn5t618-adc" },
28         { .name = "rn5t618-regulator" },
29         { .name = "rc5t619-rtc" },
30         { .name = "rn5t618-wdt" },
31 };
32
33 static bool rn5t618_volatile_reg(struct device *dev, unsigned int reg)
34 {
35         switch (reg) {
36         case RN5T618_WATCHDOGCNT:
37         case RN5T618_DCIRQ:
38         case RN5T618_ILIMDATAH ... RN5T618_AIN0DATAL:
39         case RN5T618_ADCCNT3:
40         case RN5T618_IR_ADC1 ... RN5T618_IR_ADC3:
41         case RN5T618_IR_GPR:
42         case RN5T618_IR_GPF:
43         case RN5T618_MON_IOIN:
44         case RN5T618_INTMON:
45         case RN5T618_RTC_CTRL1 ... RN5T618_RTC_CTRL2:
46         case RN5T618_RTC_SECONDS ... RN5T618_RTC_YEAR:
47         case RN5T618_CHGSTATE:
48         case RN5T618_CHGCTRL_IRR ... RN5T618_CHGERR_MONI:
49         case RN5T618_CONTROL ... RN5T618_CC_AVEREG0:
50                 return true;
51         default:
52                 return false;
53         }
54 }
55
56 static const struct regmap_config rn5t618_regmap_config = {
57         .reg_bits       = 8,
58         .val_bits       = 8,
59         .volatile_reg   = rn5t618_volatile_reg,
60         .max_register   = RN5T618_MAX_REG,
61         .cache_type     = REGCACHE_RBTREE,
62 };
63
64 static const struct regmap_irq rc5t619_irqs[] = {
65         REGMAP_IRQ_REG(RN5T618_IRQ_SYS, 0, BIT(0)),
66         REGMAP_IRQ_REG(RN5T618_IRQ_DCDC, 0, BIT(1)),
67         REGMAP_IRQ_REG(RN5T618_IRQ_RTC, 0, BIT(2)),
68         REGMAP_IRQ_REG(RN5T618_IRQ_ADC, 0, BIT(3)),
69         REGMAP_IRQ_REG(RN5T618_IRQ_GPIO, 0, BIT(4)),
70         REGMAP_IRQ_REG(RN5T618_IRQ_CHG, 0, BIT(6)),
71 };
72
73 static const struct regmap_irq_chip rc5t619_irq_chip = {
74         .name = "rc5t619",
75         .irqs = rc5t619_irqs,
76         .num_irqs = ARRAY_SIZE(rc5t619_irqs),
77         .num_regs = 1,
78         .status_base = RN5T618_INTMON,
79         .mask_base = RN5T618_INTEN,
80         .mask_invert = true,
81 };
82
83 static struct i2c_client *rn5t618_pm_power_off;
84 static struct notifier_block rn5t618_restart_handler;
85
86 static int rn5t618_irq_init(struct rn5t618 *rn5t618)
87 {
88         const struct regmap_irq_chip *irq_chip = NULL;
89         int ret;
90
91         if (!rn5t618->irq)
92                 return 0;
93
94         switch (rn5t618->variant) {
95         case RC5T619:
96                 irq_chip = &rc5t619_irq_chip;
97                 break;
98         default:
99                 dev_err(rn5t618->dev, "Currently no IRQ support for variant %d\n",
100                         (int)rn5t618->variant);
101                 return -ENOENT;
102         }
103
104         ret = devm_regmap_add_irq_chip(rn5t618->dev, rn5t618->regmap,
105                                        rn5t618->irq,
106                                        IRQF_TRIGGER_FALLING | IRQF_ONESHOT,
107                                        0, irq_chip, &rn5t618->irq_data);
108         if (ret)
109                 dev_err(rn5t618->dev, "Failed to register IRQ chip\n");
110
111         return ret;
112 }
113
114 static void rn5t618_trigger_poweroff_sequence(bool repower)
115 {
116         int ret;
117
118         /* disable automatic repower-on */
119         ret = i2c_smbus_read_byte_data(rn5t618_pm_power_off, RN5T618_REPCNT);
120         if (ret < 0)
121                 goto err;
122
123         ret &= ~RN5T618_REPCNT_REPWRON;
124         if (repower)
125                 ret |= RN5T618_REPCNT_REPWRON;
126
127         ret = i2c_smbus_write_byte_data(rn5t618_pm_power_off,
128                                         RN5T618_REPCNT, (u8)ret);
129         if (ret < 0)
130                 goto err;
131
132         /* start power-off sequence */
133         ret = i2c_smbus_read_byte_data(rn5t618_pm_power_off, RN5T618_SLPCNT);
134         if (ret < 0)
135                 goto err;
136
137         ret |= RN5T618_SLPCNT_SWPWROFF;
138
139         ret = i2c_smbus_write_byte_data(rn5t618_pm_power_off,
140                                         RN5T618_SLPCNT, (u8)ret);
141         if (ret < 0)
142                 goto err;
143
144         return;
145
146 err:
147         dev_alert(&rn5t618_pm_power_off->dev, "Failed to shutdown (err = %d)\n", ret);
148 }
149
150 static void rn5t618_power_off(void)
151 {
152         rn5t618_trigger_poweroff_sequence(false);
153 }
154
155 static int rn5t618_restart(struct notifier_block *this,
156                             unsigned long mode, void *cmd)
157 {
158         rn5t618_trigger_poweroff_sequence(true);
159
160         /*
161          * Re-power factor detection on PMIC side is not instant. 1ms
162          * proved to be enough time until reset takes effect.
163          */
164         mdelay(1);
165
166         return NOTIFY_DONE;
167 }
168
169 static const struct of_device_id rn5t618_of_match[] = {
170         { .compatible = "ricoh,rn5t567", .data = (void *)RN5T567 },
171         { .compatible = "ricoh,rn5t618", .data = (void *)RN5T618 },
172         { .compatible = "ricoh,rc5t619", .data = (void *)RC5T619 },
173         { }
174 };
175 MODULE_DEVICE_TABLE(of, rn5t618_of_match);
176
177 static int rn5t618_i2c_probe(struct i2c_client *i2c)
178 {
179         const struct of_device_id *of_id;
180         struct rn5t618 *priv;
181         int ret;
182
183         of_id = of_match_device(rn5t618_of_match, &i2c->dev);
184         if (!of_id) {
185                 dev_err(&i2c->dev, "Failed to find matching DT ID\n");
186                 return -EINVAL;
187         }
188
189         priv = devm_kzalloc(&i2c->dev, sizeof(*priv), GFP_KERNEL);
190         if (!priv)
191                 return -ENOMEM;
192
193         i2c_set_clientdata(i2c, priv);
194         priv->variant = (long)of_id->data;
195         priv->irq = i2c->irq;
196         priv->dev = &i2c->dev;
197
198         priv->regmap = devm_regmap_init_i2c(i2c, &rn5t618_regmap_config);
199         if (IS_ERR(priv->regmap)) {
200                 ret = PTR_ERR(priv->regmap);
201                 dev_err(&i2c->dev, "regmap init failed: %d\n", ret);
202                 return ret;
203         }
204
205         if (priv->variant == RC5T619)
206                 ret = devm_mfd_add_devices(&i2c->dev, PLATFORM_DEVID_NONE,
207                                            rc5t619_cells,
208                                            ARRAY_SIZE(rc5t619_cells),
209                                            NULL, 0, NULL);
210         else
211                 ret = devm_mfd_add_devices(&i2c->dev, PLATFORM_DEVID_NONE,
212                                            rn5t618_cells,
213                                            ARRAY_SIZE(rn5t618_cells),
214                                            NULL, 0, NULL);
215         if (ret) {
216                 dev_err(&i2c->dev, "failed to add sub-devices: %d\n", ret);
217                 return ret;
218         }
219
220         rn5t618_pm_power_off = i2c;
221         if (of_device_is_system_power_controller(i2c->dev.of_node)) {
222                 if (!pm_power_off)
223                         pm_power_off = rn5t618_power_off;
224                 else
225                         dev_warn(&i2c->dev, "Poweroff callback already assigned\n");
226         }
227
228         rn5t618_restart_handler.notifier_call = rn5t618_restart;
229         rn5t618_restart_handler.priority = 192;
230
231         ret = register_restart_handler(&rn5t618_restart_handler);
232         if (ret) {
233                 dev_err(&i2c->dev, "cannot register restart handler, %d\n", ret);
234                 return ret;
235         }
236
237         return rn5t618_irq_init(priv);
238 }
239
240 static int rn5t618_i2c_remove(struct i2c_client *i2c)
241 {
242         if (i2c == rn5t618_pm_power_off) {
243                 rn5t618_pm_power_off = NULL;
244                 pm_power_off = NULL;
245         }
246
247         unregister_restart_handler(&rn5t618_restart_handler);
248
249         return 0;
250 }
251
252 static int __maybe_unused rn5t618_i2c_suspend(struct device *dev)
253 {
254         struct rn5t618 *priv = dev_get_drvdata(dev);
255
256         if (priv->irq)
257                 disable_irq(priv->irq);
258
259         return 0;
260 }
261
262 static int __maybe_unused rn5t618_i2c_resume(struct device *dev)
263 {
264         struct rn5t618 *priv = dev_get_drvdata(dev);
265
266         if (priv->irq)
267                 enable_irq(priv->irq);
268
269         return 0;
270 }
271
272 static SIMPLE_DEV_PM_OPS(rn5t618_i2c_dev_pm_ops,
273                         rn5t618_i2c_suspend,
274                         rn5t618_i2c_resume);
275
276 static struct i2c_driver rn5t618_i2c_driver = {
277         .driver = {
278                 .name = "rn5t618",
279                 .of_match_table = of_match_ptr(rn5t618_of_match),
280                 .pm = &rn5t618_i2c_dev_pm_ops,
281         },
282         .probe_new = rn5t618_i2c_probe,
283         .remove = rn5t618_i2c_remove,
284 };
285
286 module_i2c_driver(rn5t618_i2c_driver);
287
288 MODULE_AUTHOR("Beniamino Galvani <b.galvani@gmail.com>");
289 MODULE_DESCRIPTION("Ricoh RN5T567/618 MFD driver");
290 MODULE_LICENSE("GPL v2");