drivers/mfd/qcom-pm8008.c

   1 // SPDX-License-Identifier: GPL-2.0-only
   2 /*
   3  * Copyright (c) 2021, The Linux Foundation. All rights reserved.
   4  */
   5
   6 #include <linux/bitops.h>
   7 #include <linux/i2c.h>
   8 #include <linux/interrupt.h>
   9 #include <linux/irq.h>
  10 #include <linux/irqdomain.h>
  11 #include <linux/module.h>
  12 #include <linux/of_device.h>
  13 #include <linux/of_platform.h>
  14 #include <linux/pinctrl/consumer.h>
  15 #include <linux/regmap.h>
  16 #include <linux/slab.h>
  17
  18 #include <dt-bindings/mfd/qcom-pm8008.h>
  19
  20 #define I2C_INTR_STATUS_BASE            0x0550
  21 #define INT_RT_STS_OFFSET               0x10
  22 #define INT_SET_TYPE_OFFSET             0x11
  23 #define INT_POL_HIGH_OFFSET             0x12
  24 #define INT_POL_LOW_OFFSET              0x13
  25 #define INT_LATCHED_CLR_OFFSET          0x14
  26 #define INT_EN_SET_OFFSET               0x15
  27 #define INT_EN_CLR_OFFSET               0x16
  28 #define INT_LATCHED_STS_OFFSET          0x18
  29
  30 enum {
  31         PM8008_MISC,
  32         PM8008_TEMP_ALARM,
  33         PM8008_GPIO1,
  34         PM8008_GPIO2,
  35         PM8008_NUM_PERIPHS,
  36 };
  37
  38 #define PM8008_PERIPH_0_BASE    0x900
  39 #define PM8008_PERIPH_1_BASE    0x2400
  40 #define PM8008_PERIPH_2_BASE    0xC000
  41 #define PM8008_PERIPH_3_BASE    0xC100
  42
  43 #define PM8008_TEMP_ALARM_ADDR  PM8008_PERIPH_1_BASE
  44 #define PM8008_GPIO1_ADDR       PM8008_PERIPH_2_BASE
  45 #define PM8008_GPIO2_ADDR       PM8008_PERIPH_3_BASE
  46
  47 enum {
  48         SET_TYPE_INDEX,
  49         POLARITY_HI_INDEX,
  50         POLARITY_LO_INDEX,
  51 };
  52
  53 static unsigned int pm8008_config_regs[] = {
  54         INT_SET_TYPE_OFFSET,
  55         INT_POL_HIGH_OFFSET,
  56         INT_POL_LOW_OFFSET,
  57 };
  58
  59 static struct regmap_irq pm8008_irqs[] = {
  60         REGMAP_IRQ_REG(PM8008_IRQ_MISC_UVLO,    PM8008_MISC,    BIT(0)),
  61         REGMAP_IRQ_REG(PM8008_IRQ_MISC_OVLO,    PM8008_MISC,    BIT(1)),
  62         REGMAP_IRQ_REG(PM8008_IRQ_MISC_OTST2,   PM8008_MISC,    BIT(2)),
  63         REGMAP_IRQ_REG(PM8008_IRQ_MISC_OTST3,   PM8008_MISC,    BIT(3)),
  64         REGMAP_IRQ_REG(PM8008_IRQ_MISC_LDO_OCP, PM8008_MISC,    BIT(4)),
  65         REGMAP_IRQ_REG(PM8008_IRQ_TEMP_ALARM,   PM8008_TEMP_ALARM, BIT(0)),
  66         REGMAP_IRQ_REG(PM8008_IRQ_GPIO1,        PM8008_GPIO1,   BIT(0)),
  67         REGMAP_IRQ_REG(PM8008_IRQ_GPIO2,        PM8008_GPIO2,   BIT(0)),
  68 };
  69
  70 static const unsigned int pm8008_periph_base[] = {
  71         PM8008_PERIPH_0_BASE,
  72         PM8008_PERIPH_1_BASE,
  73         PM8008_PERIPH_2_BASE,
  74         PM8008_PERIPH_3_BASE,
  75 };
  76
  77 static unsigned int pm8008_get_irq_reg(struct regmap_irq_chip_data *data,
  78                                        unsigned int base, int index)
  79 {
  80         /* Simple linear addressing for the main status register */
  81         if (base == I2C_INTR_STATUS_BASE)
  82                 return base + index;
  83
  84         return pm8008_periph_base[index] + base;
  85 }
  86
  87 static int pm8008_set_type_config(unsigned int **buf, unsigned int type,
  88                                   const struct regmap_irq *irq_data, int idx,
  89                                   void *irq_drv_data)
  90 {
  91         switch (type) {
  92         case IRQ_TYPE_EDGE_FALLING:
  93         case IRQ_TYPE_LEVEL_LOW:
  94                 buf[POLARITY_HI_INDEX][idx] &= ~irq_data->mask;
  95                 buf[POLARITY_LO_INDEX][idx] |= irq_data->mask;
  96                 break;
  97
  98         case IRQ_TYPE_EDGE_RISING:
  99         case IRQ_TYPE_LEVEL_HIGH:
 100                 buf[POLARITY_HI_INDEX][idx] |= irq_data->mask;
 101                 buf[POLARITY_LO_INDEX][idx] &= ~irq_data->mask;
 102                 break;
 103
 104         case IRQ_TYPE_EDGE_BOTH:
 105                 buf[POLARITY_HI_INDEX][idx] |= irq_data->mask;
 106                 buf[POLARITY_LO_INDEX][idx] |= irq_data->mask;
 107                 break;
 108
 109         default:
 110                 return -EINVAL;
 111         }
 112
 113         if (type & IRQ_TYPE_EDGE_BOTH)
 114                 buf[SET_TYPE_INDEX][idx] |= irq_data->mask;
 115         else
 116                 buf[SET_TYPE_INDEX][idx] &= ~irq_data->mask;
 117
 118         return 0;
 119 }
 120
 121 static struct regmap_irq_chip pm8008_irq_chip = {
 122         .name                   = "pm8008_irq",
 123         .main_status            = I2C_INTR_STATUS_BASE,
 124         .num_main_regs          = 1,
 125         .irqs                   = pm8008_irqs,
 126         .num_irqs               = ARRAY_SIZE(pm8008_irqs),
 127         .num_regs               = PM8008_NUM_PERIPHS,
 128         .status_base            = INT_LATCHED_STS_OFFSET,
 129         .mask_base              = INT_EN_CLR_OFFSET,
 130         .unmask_base            = INT_EN_SET_OFFSET,
 131         .mask_unmask_non_inverted = true,
 132         .ack_base               = INT_LATCHED_CLR_OFFSET,
 133         .config_base            = pm8008_config_regs,
 134         .num_config_bases       = ARRAY_SIZE(pm8008_config_regs),
 135         .num_config_regs        = PM8008_NUM_PERIPHS,
 136         .set_type_config        = pm8008_set_type_config,
 137         .get_irq_reg            = pm8008_get_irq_reg,
 138 };
 139
 140 static struct regmap_config qcom_mfd_regmap_cfg = {
 141         .reg_bits       = 16,
 142         .val_bits       = 8,
 143         .max_register   = 0xFFFF,
 144 };
 145
 146 static int pm8008_probe_irq_peripherals(struct device *dev,
 147                                         struct regmap *regmap,
 148                                         int client_irq)
 149 {
 150         int rc, i;
 151         struct regmap_irq_type *type;
 152         struct regmap_irq_chip_data *irq_data;
 153
 154         for (i = 0; i < ARRAY_SIZE(pm8008_irqs); i++) {
 155                 type = &pm8008_irqs[i].type;
 156
 157                 type->type_reg_offset = pm8008_irqs[i].reg_offset;
 158
 159                 if (type->type_reg_offset == PM8008_MISC)
 160                         type->types_supported = IRQ_TYPE_EDGE_RISING;
 161                 else
 162                         type->types_supported = (IRQ_TYPE_EDGE_BOTH |
 163                                 IRQ_TYPE_LEVEL_HIGH | IRQ_TYPE_LEVEL_LOW);
 164         }
 165
 166         rc = devm_regmap_add_irq_chip(dev, regmap, client_irq,
 167                         IRQF_SHARED, 0, &pm8008_irq_chip, &irq_data);
 168         if (rc) {
 169                 dev_err(dev, "Failed to add IRQ chip: %d\n", rc);
 170                 return rc;
 171         }
 172
 173         return 0;
 174 }
 175
 176 static int pm8008_probe(struct i2c_client *client)
 177 {
 178         int rc;
 179         struct device *dev;
 180         struct regmap *regmap;
 181
 182         dev = &client->dev;
 183         regmap = devm_regmap_init_i2c(client, &qcom_mfd_regmap_cfg);
 184         if (IS_ERR(regmap))
 185                 return PTR_ERR(regmap);
 186
 187         i2c_set_clientdata(client, regmap);
 188
 189         if (of_property_read_bool(dev->of_node, "interrupt-controller")) {
 190                 rc = pm8008_probe_irq_peripherals(dev, regmap, client->irq);
 191                 if (rc)
 192                         dev_err(dev, "Failed to probe irq periphs: %d\n", rc);
 193         }
 194
 195         return devm_of_platform_populate(dev);
 196 }
 197
 198 static const struct of_device_id pm8008_match[] = {
 199         { .compatible = "qcom,pm8008", },
 200         { },
 201 };
 202 MODULE_DEVICE_TABLE(of, pm8008_match);
 203
 204 static struct i2c_driver pm8008_mfd_driver = {
 205         .driver = {
 206                 .name = "pm8008",
 207                 .of_match_table = pm8008_match,
 208         },
 209         .probe = pm8008_probe,
 210 };
 211 module_i2c_driver(pm8008_mfd_driver);
 212
 213 MODULE_LICENSE("GPL v2");