Merge tag 'docs-5.15' of git://git.lwn.net/linux
[linux-2.6-microblaze.git] / drivers / media / dvb-frontends / m88ds3103.h
1 /* SPDX-License-Identifier: GPL-2.0-or-later */
2 /*
3  * Montage Technology M88DS3103/M88RS6000 demodulator driver
4  *
5  * Copyright (C) 2013 Antti Palosaari <crope@iki.fi>
6  */
7
8 #ifndef M88DS3103_H
9 #define M88DS3103_H
10
11 #include <linux/dvb/frontend.h>
12
13 /*
14  * I2C address
15  * 0x68,
16  */
17
18 /**
19  * enum m88ds3103_ts_mode - TS connection mode
20  * @M88DS3103_TS_SERIAL:        TS output pin D0, normal
21  * @M88DS3103_TS_SERIAL_D7:     TS output pin D7
22  * @M88DS3103_TS_PARALLEL:      TS Parallel mode
23  * @M88DS3103_TS_CI:            TS CI Mode
24  */
25 enum m88ds3103_ts_mode {
26         M88DS3103_TS_SERIAL,
27         M88DS3103_TS_SERIAL_D7,
28         M88DS3103_TS_PARALLEL,
29         M88DS3103_TS_CI
30 };
31
32 /**
33  * enum m88ds3103_clock_out
34  * @M88DS3103_CLOCK_OUT_DISABLED:       Clock output is disabled
35  * @M88DS3103_CLOCK_OUT_ENABLED:        Clock output is enabled with crystal
36  *                                      clock.
37  * @M88DS3103_CLOCK_OUT_ENABLED_DIV2:   Clock output is enabled with half
38  *                                      crystal clock.
39  */
40 enum m88ds3103_clock_out {
41         M88DS3103_CLOCK_OUT_DISABLED,
42         M88DS3103_CLOCK_OUT_ENABLED,
43         M88DS3103_CLOCK_OUT_ENABLED_DIV2
44 };
45
46 /**
47  * struct m88ds3103_platform_data - Platform data for the m88ds3103 driver
48  * @clk: Clock frequency.
49  * @i2c_wr_max: Max bytes I2C adapter can write at once.
50  * @ts_mode: TS mode.
51  * @ts_clk: TS clock (KHz).
52  * @ts_clk_pol: TS clk polarity. 1-active at falling edge; 0-active at rising
53  *  edge.
54  * @spec_inv: Input spectrum inversion.
55  * @agc: AGC configuration.
56  * @agc_inv: AGC polarity.
57  * @clk_out: Clock output.
58  * @envelope_mode: DiSEqC envelope mode.
59  * @lnb_hv_pol: LNB H/V pin polarity. 0: pin high set to VOLTAGE_18, pin low to
60  *  set VOLTAGE_13. 1: pin high set to VOLTAGE_13, pin low to set VOLTAGE_18.
61  * @lnb_en_pol: LNB enable pin polarity. 0: pin high to disable, pin low to
62  *  enable. 1: pin high to enable, pin low to disable.
63  * @get_dvb_frontend: Get DVB frontend.
64  * @get_i2c_adapter: Get I2C adapter.
65  */
66 struct m88ds3103_platform_data {
67         u32 clk;
68         u16 i2c_wr_max;
69         enum m88ds3103_ts_mode ts_mode;
70         u32 ts_clk;
71         enum m88ds3103_clock_out clk_out;
72         u8 ts_clk_pol:1;
73         u8 spec_inv:1;
74         u8 agc;
75         u8 agc_inv:1;
76         u8 envelope_mode:1;
77         u8 lnb_hv_pol:1;
78         u8 lnb_en_pol:1;
79
80         struct dvb_frontend* (*get_dvb_frontend)(struct i2c_client *);
81         struct i2c_adapter* (*get_i2c_adapter)(struct i2c_client *);
82
83 /* private: For legacy media attach wrapper. Do not set value. */
84         u8 attach_in_use:1;
85 };
86
87 /**
88  * struct m88ds3103_config - m88ds3102 configuration
89  *
90  * @i2c_addr:   I2C address. Default: none, must set. Example: 0x68, ...
91  * @clock:      Device's clock. Default: none, must set. Example: 27000000
92  * @i2c_wr_max: Max bytes I2C provider is asked to write at once.
93  *              Default: none, must set. Example: 33, 65, ...
94  * @ts_mode:    TS output mode, as defined by &enum m88ds3103_ts_mode.
95  *              Default: M88DS3103_TS_SERIAL.
96  * @ts_clk:     TS clk in KHz. Default: 0.
97  * @ts_clk_pol: TS clk polarity.Default: 0.
98  *              1-active at falling edge; 0-active at rising edge.
99  * @spec_inv:   Spectrum inversion. Default: 0.
100  * @agc_inv:    AGC polarity. Default: 0.
101  * @clock_out:  Clock output, as defined by &enum m88ds3103_clock_out.
102  *              Default: M88DS3103_CLOCK_OUT_DISABLED.
103  * @envelope_mode: DiSEqC envelope mode. Default: 0.
104  * @agc:        AGC configuration. Default: none, must set.
105  * @lnb_hv_pol: LNB H/V pin polarity. Default: 0. Values:
106  *              1: pin high set to VOLTAGE_13, pin low to set VOLTAGE_18;
107  *              0: pin high set to VOLTAGE_18, pin low to set VOLTAGE_13.
108  * @lnb_en_pol: LNB enable pin polarity. Default: 0. Values:
109  *              1: pin high to enable, pin low to disable;
110  *              0: pin high to disable, pin low to enable.
111  */
112 struct m88ds3103_config {
113         u8 i2c_addr;
114         u32 clock;
115         u16 i2c_wr_max;
116         u8 ts_mode;
117         u32 ts_clk;
118         u8 ts_clk_pol:1;
119         u8 spec_inv:1;
120         u8 agc_inv:1;
121         u8 clock_out;
122         u8 envelope_mode:1;
123         u8 agc;
124         u8 lnb_hv_pol:1;
125         u8 lnb_en_pol:1;
126 };
127
128 #if defined(CONFIG_DVB_M88DS3103) || \
129                 (defined(CONFIG_DVB_M88DS3103_MODULE) && defined(MODULE))
130 /**
131  * m88ds3103_attach - Attach a m88ds3103 demod
132  *
133  * @config: pointer to &struct m88ds3103_config with demod configuration.
134  * @i2c: i2c adapter to use.
135  * @tuner_i2c: on success, returns the I2C adapter associated with
136  *              m88ds3103 tuner.
137  *
138  * return: FE pointer on success, NULL on failure.
139  * Note: Do not add new m88ds3103_attach() users! Use I2C bindings instead.
140  */
141 extern struct dvb_frontend *m88ds3103_attach(
142                 const struct m88ds3103_config *config,
143                 struct i2c_adapter *i2c,
144                 struct i2c_adapter **tuner_i2c);
145 extern int m88ds3103_get_agc_pwm(struct dvb_frontend *fe, u8 *_agc_pwm);
146 #else
147 static inline struct dvb_frontend *m88ds3103_attach(
148                 const struct m88ds3103_config *config,
149                 struct i2c_adapter *i2c,
150                 struct i2c_adapter **tuner_i2c)
151 {
152         pr_warn("%s: driver disabled by Kconfig\n", __func__);
153         return NULL;
154 }
155 #define m88ds3103_get_agc_pwm NULL
156 #endif
157
158 #endif