Merge tag 'x86-urgent-2022-08-06' of git://git.kernel.org/pub/scm/linux/kernel/git...

[linux-2.6-microblaze.git] / drivers / md / raid10.c

// SPDX-License-Identifier: GPL-2.0-or-later
/*
 * raid10.c : Multiple Devices driver for Linux
 *
 * Copyright (C) 2000-2004 Neil Brown
 *
 * RAID-10 support for md.
 *
 * Base on code in raid1.c.  See raid1.c for further copyright information.
 */

#include <linux/slab.h>
#include <linux/delay.h>
#include <linux/blkdev.h>
#include <linux/module.h>
#include <linux/seq_file.h>
#include <linux/ratelimit.h>
#include <linux/kthread.h>
#include <linux/raid/md_p.h>
#include <trace/events/block.h>
#include "md.h"
#include "raid10.h"
#include "raid0.h"
#include "md-bitmap.h"

/*
 * RAID10 provides a combination of RAID0 and RAID1 functionality.
 * The layout of data is defined by
 *    chunk_size
 *    raid_disks
 *    near_copies (stored in low byte of layout)
 *    far_copies (stored in second byte of layout)
 *    far_offset (stored in bit 16 of layout )
 *    use_far_sets (stored in bit 17 of layout )
 *    use_far_sets_bugfixed (stored in bit 18 of layout )
 *
 * The data to be stored is divided into chunks using chunksize.  Each device
 * is divided into far_copies sections.   In each section, chunks are laid out
 * in a style similar to raid0, but near_copies copies of each chunk is stored
 * (each on a different drive).  The starting device for each section is offset
 * near_copies from the starting device of the previous section.  Thus there
 * are (near_copies * far_copies) of each chunk, and each is on a different
 * drive.  near_copies and far_copies must be at least one, and their product
 * is at most raid_disks.
 *
 * If far_offset is true, then the far_copies are handled a bit differently.
 * The copies are still in different stripes, but instead of being very far
 * apart on disk, there are adjacent stripes.
 *
 * The far and offset algorithms are handled slightly differently if
 * 'use_far_sets' is true.  In this case, the array's devices are grouped into
 * sets that are (near_copies * far_copies) in size.  The far copied stripes
 * are still shifted by 'near_copies' devices, but this shifting stays confined
 * to the set rather than the entire array.  This is done to improve the number
 * of device combinations that can fail without causing the array to fail.
 * Example 'far' algorithm w/o 'use_far_sets' (each letter represents a chunk
 * on a device):
 *    A B C D    A B C D E
 *      ...         ...
 *    D A B C    E A B C D
 * Example 'far' algorithm w/ 'use_far_sets' enabled (sets illustrated w/ []'s):
 *    [A B] [C D]    [A B] [C D E]
 *    |...| |...|    |...| | ... |
 *    [B A] [D C]    [B A] [E C D]
 */

static void allow_barrier(struct r10conf *conf);
static void lower_barrier(struct r10conf *conf);
static int _enough(struct r10conf *conf, int previous, int ignore);
static int enough(struct r10conf *conf, int ignore);
static sector_t reshape_request(struct mddev *mddev, sector_t sector_nr,
                                int *skipped);
static void reshape_request_write(struct mddev *mddev, struct r10bio *r10_bio);
static void end_reshape_write(struct bio *bio);
static void end_reshape(struct r10conf *conf);

#define raid10_log(md, fmt, args...)                            \
        do { if ((md)->queue) blk_add_trace_msg((md)->queue, "raid10 " fmt, ##args); } while (0)

#include "raid1-10.c"

/*
 * for resync bio, r10bio pointer can be retrieved from the per-bio
 * 'struct resync_pages'.
 */
static inline struct r10bio *get_resync_r10bio(struct bio *bio)
{
        return get_resync_pages(bio)->raid_bio;
}

static void * r10bio_pool_alloc(gfp_t gfp_flags, void *data)
{
        struct r10conf *conf = data;
        int size = offsetof(struct r10bio, devs[conf->geo.raid_disks]);

        /* allocate a r10bio with room for raid_disks entries in the
         * bios array */
        return kzalloc(size, gfp_flags);
}

#define RESYNC_SECTORS (RESYNC_BLOCK_SIZE >> 9)
/* amount of memory to reserve for resync requests */
#define RESYNC_WINDOW (1024*1024)
/* maximum number of concurrent requests, memory permitting */
#define RESYNC_DEPTH (32*1024*1024/RESYNC_BLOCK_SIZE)
#define CLUSTER_RESYNC_WINDOW (32 * RESYNC_WINDOW)
#define CLUSTER_RESYNC_WINDOW_SECTORS (CLUSTER_RESYNC_WINDOW >> 9)

/*
 * When performing a resync, we need to read and compare, so
 * we need as many pages are there are copies.
 * When performing a recovery, we need 2 bios, one for read,
 * one for write (we recover only one drive per r10buf)
 *
 */
static void * r10buf_pool_alloc(gfp_t gfp_flags, void *data)
{
        struct r10conf *conf = data;
        struct r10bio *r10_bio;
        struct bio *bio;
        int j;
        int nalloc, nalloc_rp;
        struct resync_pages *rps;

        r10_bio = r10bio_pool_alloc(gfp_flags, conf);
        if (!r10_bio)
                return NULL;

        if (test_bit(MD_RECOVERY_SYNC, &conf->mddev->recovery) ||
            test_bit(MD_RECOVERY_RESHAPE, &conf->mddev->recovery))
                nalloc = conf->copies; /* resync */
        else
                nalloc = 2; /* recovery */

        /* allocate once for all bios */
        if (!conf->have_replacement)
                nalloc_rp = nalloc;
        else
                nalloc_rp = nalloc * 2;
        rps = kmalloc_array(nalloc_rp, sizeof(struct resync_pages), gfp_flags);
        if (!rps)
                goto out_free_r10bio;

        /*
         * Allocate bios.
         */
        for (j = nalloc ; j-- ; ) {
                bio = bio_kmalloc(RESYNC_PAGES, gfp_flags);
                if (!bio)
                        goto out_free_bio;
                bio_init(bio, NULL, bio->bi_inline_vecs, RESYNC_PAGES, 0);
                r10_bio->devs[j].bio = bio;
                if (!conf->have_replacement)
                        continue;
                bio = bio_kmalloc(RESYNC_PAGES, gfp_flags);
                if (!bio)
                        goto out_free_bio;
                bio_init(bio, NULL, bio->bi_inline_vecs, RESYNC_PAGES, 0);
                r10_bio->devs[j].repl_bio = bio;
        }
        /*
         * Allocate RESYNC_PAGES data pages and attach them
         * where needed.
         */
        for (j = 0; j < nalloc; j++) {
                struct bio *rbio = r10_bio->devs[j].repl_bio;
                struct resync_pages *rp, *rp_repl;

                rp = &rps[j];
                if (rbio)
                        rp_repl = &rps[nalloc + j];

                bio = r10_bio->devs[j].bio;

                if (!j || test_bit(MD_RECOVERY_SYNC,
                                   &conf->mddev->recovery)) {
                        if (resync_alloc_pages(rp, gfp_flags))
                                goto out_free_pages;
                } else {
                        memcpy(rp, &rps[0], sizeof(*rp));
                        resync_get_all_pages(rp);
                }

                rp->raid_bio = r10_bio;
                bio->bi_private = rp;
                if (rbio) {
                        memcpy(rp_repl, rp, sizeof(*rp));
                        rbio->bi_private = rp_repl;
                }
        }

        return r10_bio;

out_free_pages:
        while (--j >= 0)
                resync_free_pages(&rps[j]);

        j = 0;
out_free_bio:
        for ( ; j < nalloc; j++) {
                if (r10_bio->devs[j].bio)
                        bio_uninit(r10_bio->devs[j].bio);
                kfree(r10_bio->devs[j].bio);
                if (r10_bio->devs[j].repl_bio)
                        bio_uninit(r10_bio->devs[j].repl_bio);
                kfree(r10_bio->devs[j].repl_bio);
        }
        kfree(rps);
out_free_r10bio:
        rbio_pool_free(r10_bio, conf);
        return NULL;
}

static void r10buf_pool_free(void *__r10_bio, void *data)
{
        struct r10conf *conf = data;
        struct r10bio *r10bio = __r10_bio;
        int j;
        struct resync_pages *rp = NULL;

        for (j = conf->copies; j--; ) {
                struct bio *bio = r10bio->devs[j].bio;

                if (bio) {
                        rp = get_resync_pages(bio);
                        resync_free_pages(rp);
                        bio_uninit(bio);
                        kfree(bio);
                }

                bio = r10bio->devs[j].repl_bio;
                if (bio) {
                        bio_uninit(bio);
                        kfree(bio);
                }
        }

        /* resync pages array stored in the 1st bio's .bi_private */
        kfree(rp);

        rbio_pool_free(r10bio, conf);
}

static void put_all_bios(struct r10conf *conf, struct r10bio *r10_bio)
{
        int i;

        for (i = 0; i < conf->geo.raid_disks; i++) {
                struct bio **bio = & r10_bio->devs[i].bio;
                if (!BIO_SPECIAL(*bio))
                        bio_put(*bio);
                *bio = NULL;
                bio = &r10_bio->devs[i].repl_bio;
                if (r10_bio->read_slot < 0 && !BIO_SPECIAL(*bio))
                        bio_put(*bio);
                *bio = NULL;
        }
}

static void free_r10bio(struct r10bio *r10_bio)
{
        struct r10conf *conf = r10_bio->mddev->private;

        put_all_bios(conf, r10_bio);
        mempool_free(r10_bio, &conf->r10bio_pool);
}

static void put_buf(struct r10bio *r10_bio)
{
        struct r10conf *conf = r10_bio->mddev->private;

        mempool_free(r10_bio, &conf->r10buf_pool);

        lower_barrier(conf);
}

static void reschedule_retry(struct r10bio *r10_bio)
{
        unsigned long flags;
        struct mddev *mddev = r10_bio->mddev;
        struct r10conf *conf = mddev->private;

        spin_lock_irqsave(&conf->device_lock, flags);
        list_add(&r10_bio->retry_list, &conf->retry_list);
        conf->nr_queued ++;
        spin_unlock_irqrestore(&conf->device_lock, flags);

        /* wake up frozen array... */
        wake_up(&conf->wait_barrier);

        md_wakeup_thread(mddev->thread);
}

/*
 * raid_end_bio_io() is called when we have finished servicing a mirrored
 * operation and are ready to return a success/failure code to the buffer
 * cache layer.
 */
static void raid_end_bio_io(struct r10bio *r10_bio)
{
        struct bio *bio = r10_bio->master_bio;
        struct r10conf *conf = r10_bio->mddev->private;

        if (!test_bit(R10BIO_Uptodate, &r10_bio->state))
                bio->bi_status = BLK_STS_IOERR;

        if (blk_queue_io_stat(bio->bi_bdev->bd_disk->queue))
                bio_end_io_acct(bio, r10_bio->start_time);
        bio_endio(bio);
        /*
         * Wake up any possible resync thread that waits for the device
         * to go idle.
         */
        allow_barrier(conf);

        free_r10bio(r10_bio);
}

/*
 * Update disk head position estimator based on IRQ completion info.
 */
static inline void update_head_pos(int slot, struct r10bio *r10_bio)
{
        struct r10conf *conf = r10_bio->mddev->private;

        conf->mirrors[r10_bio->devs[slot].devnum].head_position =
                r10_bio->devs[slot].addr + (r10_bio->sectors);
}

/*
 * Find the disk number which triggered given bio
 */
static int find_bio_disk(struct r10conf *conf, struct r10bio *r10_bio,
                         struct bio *bio, int *slotp, int *replp)
{
        int slot;
        int repl = 0;

        for (slot = 0; slot < conf->geo.raid_disks; slot++) {
                if (r10_bio->devs[slot].bio == bio)
                        break;
                if (r10_bio->devs[slot].repl_bio == bio) {
                        repl = 1;
                        break;
                }
        }

        update_head_pos(slot, r10_bio);

        if (slotp)
                *slotp = slot;
        if (replp)
                *replp = repl;
        return r10_bio->devs[slot].devnum;
}

static void raid10_end_read_request(struct bio *bio)
{
        int uptodate = !bio->bi_status;
        struct r10bio *r10_bio = bio->bi_private;
        int slot;
        struct md_rdev *rdev;
        struct r10conf *conf = r10_bio->mddev->private;

        slot = r10_bio->read_slot;
        rdev = r10_bio->devs[slot].rdev;
        /*
         * this branch is our 'one mirror IO has finished' event handler:
         */
        update_head_pos(slot, r10_bio);

        if (uptodate) {
                /*
                 * Set R10BIO_Uptodate in our master bio, so that
                 * we will return a good error code to the higher
                 * levels even if IO on some other mirrored buffer fails.
                 *
                 * The 'master' represents the composite IO operation to
                 * user-side. So if something waits for IO, then it will
                 * wait for the 'master' bio.
                 */
                set_bit(R10BIO_Uptodate, &r10_bio->state);
        } else {
                /* If all other devices that store this block have
                 * failed, we want to return the error upwards rather
                 * than fail the last device.  Here we redefine
                 * "uptodate" to mean "Don't want to retry"
                 */
                if (!_enough(conf, test_bit(R10BIO_Previous, &r10_bio->state),
                             rdev->raid_disk))
                        uptodate = 1;
        }
        if (uptodate) {
                raid_end_bio_io(r10_bio);
                rdev_dec_pending(rdev, conf->mddev);
        } else {
                /*
                 * oops, read error - keep the refcount on the rdev
                 */
                pr_err_ratelimited("md/raid10:%s: %pg: rescheduling sector %llu\n",
                                   mdname(conf->mddev),
                                   rdev->bdev,
                                   (unsigned long long)r10_bio->sector);
                set_bit(R10BIO_ReadError, &r10_bio->state);
                reschedule_retry(r10_bio);
        }
}

static void close_write(struct r10bio *r10_bio)
{
        /* clear the bitmap if all writes complete successfully */
        md_bitmap_endwrite(r10_bio->mddev->bitmap, r10_bio->sector,
                           r10_bio->sectors,
                           !test_bit(R10BIO_Degraded, &r10_bio->state),
                           0);
        md_write_end(r10_bio->mddev);
}

static void one_write_done(struct r10bio *r10_bio)
{
        if (atomic_dec_and_test(&r10_bio->remaining)) {
                if (test_bit(R10BIO_WriteError, &r10_bio->state))
                        reschedule_retry(r10_bio);
                else {
                        close_write(r10_bio);
                        if (test_bit(R10BIO_MadeGood, &r10_bio->state))
                                reschedule_retry(r10_bio);
                        else
                                raid_end_bio_io(r10_bio);
                }
        }
}

static void raid10_end_write_request(struct bio *bio)
{
        struct r10bio *r10_bio = bio->bi_private;
        int dev;
        int dec_rdev = 1;
        struct r10conf *conf = r10_bio->mddev->private;
        int slot, repl;
        struct md_rdev *rdev = NULL;
        struct bio *to_put = NULL;
        bool discard_error;

        discard_error = bio->bi_status && bio_op(bio) == REQ_OP_DISCARD;

        dev = find_bio_disk(conf, r10_bio, bio, &slot, &repl);

        if (repl)
                rdev = conf->mirrors[dev].replacement;
        if (!rdev) {
                smp_rmb();
                repl = 0;
                rdev = conf->mirrors[dev].rdev;
        }
        /*
         * this branch is our 'one mirror IO has finished' event handler:
         */
        if (bio->bi_status && !discard_error) {
                if (repl)
                        /* Never record new bad blocks to replacement,
                         * just fail it.
                         */
                        md_error(rdev->mddev, rdev);
                else {
                        set_bit(WriteErrorSeen, &rdev->flags);
                        if (!test_and_set_bit(WantReplacement, &rdev->flags))
                                set_bit(MD_RECOVERY_NEEDED,
                                        &rdev->mddev->recovery);

                        dec_rdev = 0;
                        if (test_bit(FailFast, &rdev->flags) &&
                            (bio->bi_opf & MD_FAILFAST)) {
                                md_error(rdev->mddev, rdev);
                        }

                        /*
                         * When the device is faulty, it is not necessary to
                         * handle write error.
                         */
                        if (!test_bit(Faulty, &rdev->flags))
                                set_bit(R10BIO_WriteError, &r10_bio->state);
                        else {
                                /* Fail the request */
                                set_bit(R10BIO_Degraded, &r10_bio->state);
                                r10_bio->devs[slot].bio = NULL;
                                to_put = bio;
                                dec_rdev = 1;
                        }
                }
        } else {
                /*
                 * Set R10BIO_Uptodate in our master bio, so that
                 * we will return a good error code for to the higher
                 * levels even if IO on some other mirrored buffer fails.
                 *
                 * The 'master' represents the composite IO operation to
                 * user-side. So if something waits for IO, then it will
                 * wait for the 'master' bio.
                 */
                sector_t first_bad;
                int bad_sectors;

                /*
                 * Do not set R10BIO_Uptodate if the current device is
                 * rebuilding or Faulty. This is because we cannot use
                 * such device for properly reading the data back (we could
                 * potentially use it, if the current write would have felt
                 * before rdev->recovery_offset, but for simplicity we don't
                 * check this here.
                 */
                if (test_bit(In_sync, &rdev->flags) &&
                    !test_bit(Faulty, &rdev->flags))
                        set_bit(R10BIO_Uptodate, &r10_bio->state);

                /* Maybe we can clear some bad blocks. */
                if (is_badblock(rdev,
                                r10_bio->devs[slot].addr,
                                r10_bio->sectors,
                                &first_bad, &bad_sectors) && !discard_error) {
                        bio_put(bio);
                        if (repl)
                                r10_bio->devs[slot].repl_bio = IO_MADE_GOOD;
                        else
                                r10_bio->devs[slot].bio = IO_MADE_GOOD;
                        dec_rdev = 0;
                        set_bit(R10BIO_MadeGood, &r10_bio->state);
                }
        }

        /*
         *
         * Let's see if all mirrored write operations have finished
         * already.
         */
        one_write_done(r10_bio);
        if (dec_rdev)
                rdev_dec_pending(rdev, conf->mddev);
        if (to_put)
                bio_put(to_put);
}

/*
 * RAID10 layout manager
 * As well as the chunksize and raid_disks count, there are two
 * parameters: near_copies and far_copies.
 * near_copies * far_copies must be <= raid_disks.
 * Normally one of these will be 1.
 * If both are 1, we get raid0.
 * If near_copies == raid_disks, we get raid1.
 *
 * Chunks are laid out in raid0 style with near_copies copies of the
 * first chunk, followed by near_copies copies of the next chunk and
 * so on.
 * If far_copies > 1, then after 1/far_copies of the array has been assigned
 * as described above, we start again with a device offset of near_copies.
 * So we effectively have another copy of the whole array further down all
 * the drives, but with blocks on different drives.
 * With this layout, and block is never stored twice on the one device.
 *
 * raid10_find_phys finds the sector offset of a given virtual sector
 * on each device that it is on.
 *
 * raid10_find_virt does the reverse mapping, from a device and a
 * sector offset to a virtual address
 */

static void __raid10_find_phys(struct geom *geo, struct r10bio *r10bio)
{
        int n,f;
        sector_t sector;
        sector_t chunk;
        sector_t stripe;
        int dev;
        int slot = 0;
        int last_far_set_start, last_far_set_size;

        last_far_set_start = (geo->raid_disks / geo->far_set_size) - 1;
        last_far_set_start *= geo->far_set_size;

        last_far_set_size = geo->far_set_size;
        last_far_set_size += (geo->raid_disks % geo->far_set_size);

        /* now calculate first sector/dev */
        chunk = r10bio->sector >> geo->chunk_shift;
        sector = r10bio->sector & geo->chunk_mask;

        chunk *= geo->near_copies;
        stripe = chunk;
        dev = sector_div(stripe, geo->raid_disks);
        if (geo->far_offset)
                stripe *= geo->far_copies;

        sector += stripe << geo->chunk_shift;

        /* and calculate all the others */
        for (n = 0; n < geo->near_copies; n++) {
                int d = dev;
                int set;
                sector_t s = sector;
                r10bio->devs[slot].devnum = d;
                r10bio->devs[slot].addr = s;
                slot++;

                for (f = 1; f < geo->far_copies; f++) {
                        set = d / geo->far_set_size;
                        d += geo->near_copies;

                        if ((geo->raid_disks % geo->far_set_size) &&
                            (d > last_far_set_start)) {
                                d -= last_far_set_start;
                                d %= last_far_set_size;
                                d += last_far_set_start;
                        } else {
                                d %= geo->far_set_size;
                                d += geo->far_set_size * set;
                        }
                        s += geo->stride;
                        r10bio->devs[slot].devnum = d;
                        r10bio->devs[slot].addr = s;
                        slot++;
                }
                dev++;
                if (dev >= geo->raid_disks) {
                        dev = 0;
                        sector += (geo->chunk_mask + 1);
                }
        }
}

static void raid10_find_phys(struct r10conf *conf, struct r10bio *r10bio)
{
        struct geom *geo = &conf->geo;

        if (conf->reshape_progress != MaxSector &&
            ((r10bio->sector >= conf->reshape_progress) !=
             conf->mddev->reshape_backwards)) {
                set_bit(R10BIO_Previous, &r10bio->state);
                geo = &conf->prev;
        } else
                clear_bit(R10BIO_Previous, &r10bio->state);

        __raid10_find_phys(geo, r10bio);
}

static sector_t raid10_find_virt(struct r10conf *conf, sector_t sector, int dev)
{
        sector_t offset, chunk, vchunk;
        /* Never use conf->prev as this is only called during resync
         * or recovery, so reshape isn't happening
         */
        struct geom *geo = &conf->geo;
        int far_set_start = (dev / geo->far_set_size) * geo->far_set_size;
        int far_set_size = geo->far_set_size;
        int last_far_set_start;

        if (geo->raid_disks % geo->far_set_size) {
                last_far_set_start = (geo->raid_disks / geo->far_set_size) - 1;
                last_far_set_start *= geo->far_set_size;

                if (dev >= last_far_set_start) {
                        far_set_size = geo->far_set_size;
                        far_set_size += (geo->raid_disks % geo->far_set_size);
                        far_set_start = last_far_set_start;
                }
        }

        offset = sector & geo->chunk_mask;
        if (geo->far_offset) {
                int fc;
                chunk = sector >> geo->chunk_shift;
                fc = sector_div(chunk, geo->far_copies);
                dev -= fc * geo->near_copies;
                if (dev < far_set_start)
                        dev += far_set_size;
        } else {
                while (sector >= geo->stride) {
                        sector -= geo->stride;
                        if (dev < (geo->near_copies + far_set_start))
                                dev += far_set_size - geo->near_copies;
                        else
                                dev -= geo->near_copies;
                }
                chunk = sector >> geo->chunk_shift;
        }
        vchunk = chunk * geo->raid_disks + dev;
        sector_div(vchunk, geo->near_copies);
        return (vchunk << geo->chunk_shift) + offset;
}

/*
 * This routine returns the disk from which the requested read should
 * be done. There is a per-array 'next expected sequential IO' sector
 * number - if this matches on the next IO then we use the last disk.
 * There is also a per-disk 'last know head position' sector that is
 * maintained from IRQ contexts, both the normal and the resync IO
 * completion handlers update this position correctly. If there is no
 * perfect sequential match then we pick the disk whose head is closest.
 *
 * If there are 2 mirrors in the same 2 devices, performance degrades
 * because position is mirror, not device based.
 *
 * The rdev for the device selected will have nr_pending incremented.
 */

/*
 * FIXME: possibly should rethink readbalancing and do it differently
 * depending on near_copies / far_copies geometry.
 */
static struct md_rdev *read_balance(struct r10conf *conf,
                                    struct r10bio *r10_bio,
                                    int *max_sectors)
{
        const sector_t this_sector = r10_bio->sector;
        int disk, slot;
        int sectors = r10_bio->sectors;
        int best_good_sectors;
        sector_t new_distance, best_dist;
        struct md_rdev *best_dist_rdev, *best_pending_rdev, *rdev = NULL;
        int do_balance;
        int best_dist_slot, best_pending_slot;
        bool has_nonrot_disk = false;
        unsigned int min_pending;
        struct geom *geo = &conf->geo;

        raid10_find_phys(conf, r10_bio);
        rcu_read_lock();
        best_dist_slot = -1;
        min_pending = UINT_MAX;
        best_dist_rdev = NULL;
        best_pending_rdev = NULL;
        best_dist = MaxSector;
        best_good_sectors = 0;
        do_balance = 1;
        clear_bit(R10BIO_FailFast, &r10_bio->state);
        /*
         * Check if we can balance. We can balance on the whole
         * device if no resync is going on (recovery is ok), or below
         * the resync window. We take the first readable disk when
         * above the resync window.
         */
        if ((conf->mddev->recovery_cp < MaxSector
             && (this_sector + sectors >= conf->next_resync)) ||
            (mddev_is_clustered(conf->mddev) &&
             md_cluster_ops->area_resyncing(conf->mddev, READ, this_sector,
                                            this_sector + sectors)))
                do_balance = 0;

        for (slot = 0; slot < conf->copies ; slot++) {
                sector_t first_bad;
                int bad_sectors;
                sector_t dev_sector;
                unsigned int pending;
                bool nonrot;

                if (r10_bio->devs[slot].bio == IO_BLOCKED)
                        continue;
                disk = r10_bio->devs[slot].devnum;
                rdev = rcu_dereference(conf->mirrors[disk].replacement);
                if (rdev == NULL || test_bit(Faulty, &rdev->flags) ||
                    r10_bio->devs[slot].addr + sectors > rdev->recovery_offset)
                        rdev = rcu_dereference(conf->mirrors[disk].rdev);
                if (rdev == NULL ||
                    test_bit(Faulty, &rdev->flags))
                        continue;
                if (!test_bit(In_sync, &rdev->flags) &&
                    r10_bio->devs[slot].addr + sectors > rdev->recovery_offset)
                        continue;

                dev_sector = r10_bio->devs[slot].addr;
                if (is_badblock(rdev, dev_sector, sectors,
                                &first_bad, &bad_sectors)) {
                        if (best_dist < MaxSector)
                                /* Already have a better slot */
                                continue;
                        if (first_bad <= dev_sector) {
                                /* Cannot read here.  If this is the
                                 * 'primary' device, then we must not read
                                 * beyond 'bad_sectors' from another device.
                                 */
                                bad_sectors -= (dev_sector - first_bad);
                                if (!do_balance && sectors > bad_sectors)
                                        sectors = bad_sectors;
                                if (best_good_sectors > sectors)
                                        best_good_sectors = sectors;
                        } else {
                                sector_t good_sectors =
                                        first_bad - dev_sector;
                                if (good_sectors > best_good_sectors) {
                                        best_good_sectors = good_sectors;
                                        best_dist_slot = slot;
                                        best_dist_rdev = rdev;
                                }
                                if (!do_balance)
                                        /* Must read from here */
                                        break;
                        }
                        continue;
                } else
                        best_good_sectors = sectors;

                if (!do_balance)
                        break;

                nonrot = bdev_nonrot(rdev->bdev);
                has_nonrot_disk |= nonrot;
                pending = atomic_read(&rdev->nr_pending);
                if (min_pending > pending && nonrot) {
                        min_pending = pending;
                        best_pending_slot = slot;
                        best_pending_rdev = rdev;
                }

                if (best_dist_slot >= 0)
                        /* At least 2 disks to choose from so failfast is OK */
                        set_bit(R10BIO_FailFast, &r10_bio->state);
                /* This optimisation is debatable, and completely destroys
                 * sequential read speed for 'far copies' arrays.  So only
                 * keep it for 'near' arrays, and review those later.
                 */
                if (geo->near_copies > 1 && !pending)
                        new_distance = 0;

                /* for far > 1 always use the lowest address */
                else if (geo->far_copies > 1)
                        new_distance = r10_bio->devs[slot].addr;
                else
                        new_distance = abs(r10_bio->devs[slot].addr -
                                           conf->mirrors[disk].head_position);

                if (new_distance < best_dist) {
                        best_dist = new_distance;
                        best_dist_slot = slot;
                        best_dist_rdev = rdev;
                }
        }
        if (slot >= conf->copies) {
                if (has_nonrot_disk) {
                        slot = best_pending_slot;
                        rdev = best_pending_rdev;
                } else {
                        slot = best_dist_slot;
                        rdev = best_dist_rdev;
                }
        }

        if (slot >= 0) {
                atomic_inc(&rdev->nr_pending);
                r10_bio->read_slot = slot;
        } else
                rdev = NULL;
        rcu_read_unlock();
        *max_sectors = best_good_sectors;

        return rdev;
}

static void flush_pending_writes(struct r10conf *conf)
{
        /* Any writes that have been queued but are awaiting
         * bitmap updates get flushed here.
         */
        spin_lock_irq(&conf->device_lock);

        if (conf->pending_bio_list.head) {
                struct blk_plug plug;
                struct bio *bio;

                bio = bio_list_get(&conf->pending_bio_list);
                spin_unlock_irq(&conf->device_lock);

                /*
                 * As this is called in a wait_event() loop (see freeze_array),
                 * current->state might be TASK_UNINTERRUPTIBLE which will
                 * cause a warning when we prepare to wait again.  As it is
                 * rare that this path is taken, it is perfectly safe to force
                 * us to go around the wait_event() loop again, so the warning
                 * is a false-positive. Silence the warning by resetting
                 * thread state
                 */
                __set_current_state(TASK_RUNNING);

                blk_start_plug(&plug);
                /* flush any pending bitmap writes to disk
                 * before proceeding w/ I/O */
                md_bitmap_unplug(conf->mddev->bitmap);
                wake_up(&conf->wait_barrier);

                while (bio) { /* submit pending writes */
                        struct bio *next = bio->bi_next;
                        struct md_rdev *rdev = (void*)bio->bi_bdev;
                        bio->bi_next = NULL;
                        bio_set_dev(bio, rdev->bdev);
                        if (test_bit(Faulty, &rdev->flags)) {
                                bio_io_error(bio);
                        } else if (unlikely((bio_op(bio) ==  REQ_OP_DISCARD) &&
                                            !bdev_max_discard_sectors(bio->bi_bdev)))
                                /* Just ignore it */
                                bio_endio(bio);
                        else
                                submit_bio_noacct(bio);
                        bio = next;
                }
                blk_finish_plug(&plug);
        } else
                spin_unlock_irq(&conf->device_lock);
}

/* Barriers....
 * Sometimes we need to suspend IO while we do something else,
 * either some resync/recovery, or reconfigure the array.
 * To do this we raise a 'barrier'.
 * The 'barrier' is a counter that can be raised multiple times
 * to count how many activities are happening which preclude
 * normal IO.
 * We can only raise the barrier if there is no pending IO.
 * i.e. if nr_pending == 0.
 * We choose only to raise the barrier if no-one is waiting for the
 * barrier to go down.  This means that as soon as an IO request
 * is ready, no other operations which require a barrier will start
 * until the IO request has had a chance.
 *
 * So: regular IO calls 'wait_barrier'.  When that returns there
 *    is no backgroup IO happening,  It must arrange to call
 *    allow_barrier when it has finished its IO.
 * backgroup IO calls must call raise_barrier.  Once that returns
 *    there is no normal IO happeing.  It must arrange to call
 *    lower_barrier when the particular background IO completes.
 */

static void raise_barrier(struct r10conf *conf, int force)
{
        BUG_ON(force && !conf->barrier);
        spin_lock_irq(&conf->resync_lock);

        /* Wait until no block IO is waiting (unless 'force') */
        wait_event_lock_irq(conf->wait_barrier, force || !conf->nr_waiting,
                            conf->resync_lock);

        /* block any new IO from starting */
        conf->barrier++;

        /* Now wait for all pending IO to complete */
        wait_event_lock_irq(conf->wait_barrier,
                            !atomic_read(&conf->nr_pending) && conf->barrier < RESYNC_DEPTH,
                            conf->resync_lock);

        spin_unlock_irq(&conf->resync_lock);
}

static void lower_barrier(struct r10conf *conf)
{
        unsigned long flags;
        spin_lock_irqsave(&conf->resync_lock, flags);
        conf->barrier--;
        spin_unlock_irqrestore(&conf->resync_lock, flags);
        wake_up(&conf->wait_barrier);
}

static bool wait_barrier(struct r10conf *conf, bool nowait)
{
        bool ret = true;

        spin_lock_irq(&conf->resync_lock);
        if (conf->barrier) {
                struct bio_list *bio_list = current->bio_list;
                conf->nr_waiting++;
                /* Wait for the barrier to drop.
                 * However if there are already pending
                 * requests (preventing the barrier from
                 * rising completely), and the
                 * pre-process bio queue isn't empty,
                 * then don't wait, as we need to empty
                 * that queue to get the nr_pending
                 * count down.
                 */
                /* Return false when nowait flag is set */
                if (nowait) {
                        ret = false;
                } else {
                        raid10_log(conf->mddev, "wait barrier");
                        wait_event_lock_irq(conf->wait_barrier,
                                            !conf->barrier ||
                                            (atomic_read(&conf->nr_pending) &&
                                             bio_list &&
                                             (!bio_list_empty(&bio_list[0]) ||
                                              !bio_list_empty(&bio_list[1]))) ||
                                             /* move on if recovery thread is
                                              * blocked by us
                                              */
                                             (conf->mddev->thread->tsk == current &&
                                              test_bit(MD_RECOVERY_RUNNING,
                                                       &conf->mddev->recovery) &&
                                              conf->nr_queued > 0),
                                            conf->resync_lock);
                }
                conf->nr_waiting--;
                if (!conf->nr_waiting)
                        wake_up(&conf->wait_barrier);
        }
        /* Only increment nr_pending when we wait */
        if (ret)
                atomic_inc(&conf->nr_pending);
        spin_unlock_irq(&conf->resync_lock);
        return ret;
}

static void allow_barrier(struct r10conf *conf)
{
        if ((atomic_dec_and_test(&conf->nr_pending)) ||
                        (conf->array_freeze_pending))
                wake_up(&conf->wait_barrier);
}

static void freeze_array(struct r10conf *conf, int extra)
{
        /* stop syncio and normal IO and wait for everything to
         * go quiet.
         * We increment barrier and nr_waiting, and then
         * wait until nr_pending match nr_queued+extra
         * This is called in the context of one normal IO request
         * that has failed. Thus any sync request that might be pending
         * will be blocked by nr_pending, and we need to wait for
         * pending IO requests to complete or be queued for re-try.
         * Thus the number queued (nr_queued) plus this request (extra)
         * must match the number of pending IOs (nr_pending) before
         * we continue.
         */
        spin_lock_irq(&conf->resync_lock);
        conf->array_freeze_pending++;
        conf->barrier++;
        conf->nr_waiting++;
        wait_event_lock_irq_cmd(conf->wait_barrier,
                                atomic_read(&conf->nr_pending) == conf->nr_queued+extra,
                                conf->resync_lock,
                                flush_pending_writes(conf));

        conf->array_freeze_pending--;
        spin_unlock_irq(&conf->resync_lock);
}

static void unfreeze_array(struct r10conf *conf)
{
        /* reverse the effect of the freeze */
        spin_lock_irq(&conf->resync_lock);
        conf->barrier--;
        conf->nr_waiting--;
        wake_up(&conf->wait_barrier);
        spin_unlock_irq(&conf->resync_lock);
}

static sector_t choose_data_offset(struct r10bio *r10_bio,
                                   struct md_rdev *rdev)
{
        if (!test_bit(MD_RECOVERY_RESHAPE, &rdev->mddev->recovery) ||
            test_bit(R10BIO_Previous, &r10_bio->state))
                return rdev->data_offset;
        else
                return rdev->new_data_offset;
}

static void raid10_unplug(struct blk_plug_cb *cb, bool from_schedule)
{
        struct raid1_plug_cb *plug = container_of(cb, struct raid1_plug_cb, cb);
        struct mddev *mddev = plug->cb.data;
        struct r10conf *conf = mddev->private;
        struct bio *bio;

        if (from_schedule || current->bio_list) {
                spin_lock_irq(&conf->device_lock);
                bio_list_merge(&conf->pending_bio_list, &plug->pending);
                spin_unlock_irq(&conf->device_lock);
                wake_up(&conf->wait_barrier);
                md_wakeup_thread(mddev->thread);
                kfree(plug);
                return;
        }

        /* we aren't scheduling, so we can do the write-out directly. */
        bio = bio_list_get(&plug->pending);
        md_bitmap_unplug(mddev->bitmap);
        wake_up(&conf->wait_barrier);

        while (bio) { /* submit pending writes */
                struct bio *next = bio->bi_next;
                struct md_rdev *rdev = (void*)bio->bi_bdev;
                bio->bi_next = NULL;
                bio_set_dev(bio, rdev->bdev);
                if (test_bit(Faulty, &rdev->flags)) {
                        bio_io_error(bio);
                } else if (unlikely((bio_op(bio) ==  REQ_OP_DISCARD) &&
                                    !bdev_max_discard_sectors(bio->bi_bdev)))
                        /* Just ignore it */
                        bio_endio(bio);
                else
                        submit_bio_noacct(bio);
                bio = next;
        }
        kfree(plug);
}

/*
 * 1. Register the new request and wait if the reconstruction thread has put
 * up a bar for new requests. Continue immediately if no resync is active
 * currently.
 * 2. If IO spans the reshape position.  Need to wait for reshape to pass.
 */
static bool regular_request_wait(struct mddev *mddev, struct r10conf *conf,
                                 struct bio *bio, sector_t sectors)
{
        /* Bail out if REQ_NOWAIT is set for the bio */
        if (!wait_barrier(conf, bio->bi_opf & REQ_NOWAIT)) {
                bio_wouldblock_error(bio);
                return false;
        }
        while (test_bit(MD_RECOVERY_RESHAPE, &mddev->recovery) &&
            bio->bi_iter.bi_sector < conf->reshape_progress &&
            bio->bi_iter.bi_sector + sectors > conf->reshape_progress) {
                allow_barrier(conf);
                if (bio->bi_opf & REQ_NOWAIT) {
                        bio_wouldblock_error(bio);
                        return false;
                }
                raid10_log(conf->mddev, "wait reshape");
                wait_event(conf->wait_barrier,
                           conf->reshape_progress <= bio->bi_iter.bi_sector ||
                           conf->reshape_progress >= bio->bi_iter.bi_sector +
                           sectors);
                wait_barrier(conf, false);
        }
        return true;
}

static void raid10_read_request(struct mddev *mddev, struct bio *bio,
                                struct r10bio *r10_bio)
{
        struct r10conf *conf = mddev->private;
        struct bio *read_bio;
        const enum req_op op = bio_op(bio);
        const blk_opf_t do_sync = bio->bi_opf & REQ_SYNC;
        int max_sectors;
        struct md_rdev *rdev;
        char b[BDEVNAME_SIZE];
        int slot = r10_bio->read_slot;
        struct md_rdev *err_rdev = NULL;
        gfp_t gfp = GFP_NOIO;

        if (slot >= 0 && r10_bio->devs[slot].rdev) {
                /*
                 * This is an error retry, but we cannot
                 * safely dereference the rdev in the r10_bio,
                 * we must use the one in conf.
                 * If it has already been disconnected (unlikely)
                 * we lose the device name in error messages.
                 */
                int disk;
                /*
                 * As we are blocking raid10, it is a little safer to
                 * use __GFP_HIGH.
                 */
                gfp = GFP_NOIO | __GFP_HIGH;

                rcu_read_lock();
                disk = r10_bio->devs[slot].devnum;
                err_rdev = rcu_dereference(conf->mirrors[disk].rdev);
                if (err_rdev)
                        snprintf(b, sizeof(b), "%pg", err_rdev->bdev);
                else {
                        strcpy(b, "???");
                        /* This never gets dereferenced */
                        err_rdev = r10_bio->devs[slot].rdev;
                }
                rcu_read_unlock();
        }

        if (!regular_request_wait(mddev, conf, bio, r10_bio->sectors))
                return;
        rdev = read_balance(conf, r10_bio, &max_sectors);
        if (!rdev) {
                if (err_rdev) {
                        pr_crit_ratelimited("md/raid10:%s: %s: unrecoverable I/O read error for block %llu\n",
                                            mdname(mddev), b,
                                            (unsigned long long)r10_bio->sector);
                }
                raid_end_bio_io(r10_bio);
                return;
        }
        if (err_rdev)
                pr_err_ratelimited("md/raid10:%s: %pg: redirecting sector %llu to another mirror\n",
                                   mdname(mddev),
                                   rdev->bdev,
                                   (unsigned long long)r10_bio->sector);
        if (max_sectors < bio_sectors(bio)) {
                struct bio *split = bio_split(bio, max_sectors,
                                              gfp, &conf->bio_split);
                bio_chain(split, bio);
                allow_barrier(conf);
                submit_bio_noacct(bio);
                wait_barrier(conf, false);
                bio = split;
                r10_bio->master_bio = bio;
                r10_bio->sectors = max_sectors;
        }
        slot = r10_bio->read_slot;

        if (blk_queue_io_stat(bio->bi_bdev->bd_disk->queue))
                r10_bio->start_time = bio_start_io_acct(bio);
        read_bio = bio_alloc_clone(rdev->bdev, bio, gfp, &mddev->bio_set);

        r10_bio->devs[slot].bio = read_bio;
        r10_bio->devs[slot].rdev = rdev;

        read_bio->bi_iter.bi_sector = r10_bio->devs[slot].addr +
                choose_data_offset(r10_bio, rdev);
        read_bio->bi_end_io = raid10_end_read_request;
        bio_set_op_attrs(read_bio, op, do_sync);
        if (test_bit(FailFast, &rdev->flags) &&
            test_bit(R10BIO_FailFast, &r10_bio->state))
                read_bio->bi_opf |= MD_FAILFAST;
        read_bio->bi_private = r10_bio;

        if (mddev->gendisk)
                trace_block_bio_remap(read_bio, disk_devt(mddev->gendisk),
                                      r10_bio->sector);
        submit_bio_noacct(read_bio);
        return;
}

static void raid10_write_one_disk(struct mddev *mddev, struct r10bio *r10_bio,
                                  struct bio *bio, bool replacement,
                                  int n_copy)
{
        const enum req_op op = bio_op(bio);
        const blk_opf_t do_sync = bio->bi_opf & REQ_SYNC;
        const blk_opf_t do_fua = bio->bi_opf & REQ_FUA;
        unsigned long flags;
        struct blk_plug_cb *cb;
        struct raid1_plug_cb *plug = NULL;
        struct r10conf *conf = mddev->private;
        struct md_rdev *rdev;
        int devnum = r10_bio->devs[n_copy].devnum;
        struct bio *mbio;

        if (replacement) {
                rdev = conf->mirrors[devnum].replacement;
                if (rdev == NULL) {
                        /* Replacement just got moved to main 'rdev' */
                        smp_mb();
                        rdev = conf->mirrors[devnum].rdev;
                }
        } else
                rdev = conf->mirrors[devnum].rdev;

        mbio = bio_alloc_clone(rdev->bdev, bio, GFP_NOIO, &mddev->bio_set);
        if (replacement)
                r10_bio->devs[n_copy].repl_bio = mbio;
        else
                r10_bio->devs[n_copy].bio = mbio;

        mbio->bi_iter.bi_sector = (r10_bio->devs[n_copy].addr +
                                   choose_data_offset(r10_bio, rdev));
        mbio->bi_end_io = raid10_end_write_request;
        bio_set_op_attrs(mbio, op, do_sync | do_fua);
        if (!replacement && test_bit(FailFast,
                                     &conf->mirrors[devnum].rdev->flags)
                         && enough(conf, devnum))
                mbio->bi_opf |= MD_FAILFAST;
        mbio->bi_private = r10_bio;

        if (conf->mddev->gendisk)
                trace_block_bio_remap(mbio, disk_devt(conf->mddev->gendisk),
                                      r10_bio->sector);
        /* flush_pending_writes() needs access to the rdev so...*/
        mbio->bi_bdev = (void *)rdev;

        atomic_inc(&r10_bio->remaining);

        cb = blk_check_plugged(raid10_unplug, mddev, sizeof(*plug));
        if (cb)
                plug = container_of(cb, struct raid1_plug_cb, cb);
        else
                plug = NULL;
        if (plug) {
                bio_list_add(&plug->pending, mbio);
        } else {
                spin_lock_irqsave(&conf->device_lock, flags);
                bio_list_add(&conf->pending_bio_list, mbio);
                spin_unlock_irqrestore(&conf->device_lock, flags);
                md_wakeup_thread(mddev->thread);
        }
}

static void wait_blocked_dev(struct mddev *mddev, struct r10bio *r10_bio)
{
        int i;
        struct r10conf *conf = mddev->private;
        struct md_rdev *blocked_rdev;

retry_wait:
        blocked_rdev = NULL;
        rcu_read_lock();
        for (i = 0; i < conf->copies; i++) {
                struct md_rdev *rdev = rcu_dereference(conf->mirrors[i].rdev);
                struct md_rdev *rrdev = rcu_dereference(
                        conf->mirrors[i].replacement);
                if (rdev == rrdev)
                        rrdev = NULL;
                if (rdev && unlikely(test_bit(Blocked, &rdev->flags))) {
                        atomic_inc(&rdev->nr_pending);
                        blocked_rdev = rdev;
                        break;
                }
                if (rrdev && unlikely(test_bit(Blocked, &rrdev->flags))) {
                        atomic_inc(&rrdev->nr_pending);
                        blocked_rdev = rrdev;
                        break;
                }

                if (rdev && test_bit(WriteErrorSeen, &rdev->flags)) {
                        sector_t first_bad;
                        sector_t dev_sector = r10_bio->devs[i].addr;
                        int bad_sectors;
                        int is_bad;

                        /*
                         * Discard request doesn't care the write result
                         * so it doesn't need to wait blocked disk here.
                         */
                        if (!r10_bio->sectors)
                                continue;

                        is_bad = is_badblock(rdev, dev_sector, r10_bio->sectors,
                                             &first_bad, &bad_sectors);
                        if (is_bad < 0) {
                                /*
                                 * Mustn't write here until the bad block
                                 * is acknowledged
                                 */
                                atomic_inc(&rdev->nr_pending);
                                set_bit(BlockedBadBlocks, &rdev->flags);
                                blocked_rdev = rdev;
                                break;
                        }
                }
        }
        rcu_read_unlock();

        if (unlikely(blocked_rdev)) {
                /* Have to wait for this device to get unblocked, then retry */
                allow_barrier(conf);
                raid10_log(conf->mddev, "%s wait rdev %d blocked",
                                __func__, blocked_rdev->raid_disk);
                md_wait_for_blocked_rdev(blocked_rdev, mddev);
                wait_barrier(conf, false);
                goto retry_wait;
        }
}

static void raid10_write_request(struct mddev *mddev, struct bio *bio,
                                 struct r10bio *r10_bio)
{
        struct r10conf *conf = mddev->private;
        int i;
        sector_t sectors;
        int max_sectors;

        if ((mddev_is_clustered(mddev) &&
             md_cluster_ops->area_resyncing(mddev, WRITE,
                                            bio->bi_iter.bi_sector,
                                            bio_end_sector(bio)))) {
                DEFINE_WAIT(w);
                /* Bail out if REQ_NOWAIT is set for the bio */
                if (bio->bi_opf & REQ_NOWAIT) {
                        bio_wouldblock_error(bio);
                        return;
                }
                for (;;) {
                        prepare_to_wait(&conf->wait_barrier,
                                        &w, TASK_IDLE);
                        if (!md_cluster_ops->area_resyncing(mddev, WRITE,
                                 bio->bi_iter.bi_sector, bio_end_sector(bio)))
                                break;
                        schedule();
                }
                finish_wait(&conf->wait_barrier, &w);
        }

        sectors = r10_bio->sectors;
        if (!regular_request_wait(mddev, conf, bio, sectors))
                return;
        if (test_bit(MD_RECOVERY_RESHAPE, &mddev->recovery) &&
            (mddev->reshape_backwards
             ? (bio->bi_iter.bi_sector < conf->reshape_safe &&
                bio->bi_iter.bi_sector + sectors > conf->reshape_progress)
             : (bio->bi_iter.bi_sector + sectors > conf->reshape_safe &&
                bio->bi_iter.bi_sector < conf->reshape_progress))) {
                /* Need to update reshape_position in metadata */
                mddev->reshape_position = conf->reshape_progress;
                set_mask_bits(&mddev->sb_flags, 0,
                              BIT(MD_SB_CHANGE_DEVS) | BIT(MD_SB_CHANGE_PENDING));
                md_wakeup_thread(mddev->thread);
                if (bio->bi_opf & REQ_NOWAIT) {
                        allow_barrier(conf);
                        bio_wouldblock_error(bio);
                        return;
                }
                raid10_log(conf->mddev, "wait reshape metadata");
                wait_event(mddev->sb_wait,
                           !test_bit(MD_SB_CHANGE_PENDING, &mddev->sb_flags));

                conf->reshape_safe = mddev->reshape_position;
        }

        /* first select target devices under rcu_lock and
         * inc refcount on their rdev.  Record them by setting
         * bios[x] to bio
         * If there are known/acknowledged bad blocks on any device
         * on which we have seen a write error, we want to avoid
         * writing to those blocks.  This potentially requires several
         * writes to write around the bad blocks.  Each set of writes
         * gets its own r10_bio with a set of bios attached.
         */

        r10_bio->read_slot = -1; /* make sure repl_bio gets freed */
        raid10_find_phys(conf, r10_bio);

        wait_blocked_dev(mddev, r10_bio);

        rcu_read_lock();
        max_sectors = r10_bio->sectors;

        for (i = 0;  i < conf->copies; i++) {
                int d = r10_bio->devs[i].devnum;
                struct md_rdev *rdev = rcu_dereference(conf->mirrors[d].rdev);
                struct md_rdev *rrdev = rcu_dereference(
                        conf->mirrors[d].replacement);
                if (rdev == rrdev)
                        rrdev = NULL;
                if (rdev && (test_bit(Faulty, &rdev->flags)))
                        rdev = NULL;
                if (rrdev && (test_bit(Faulty, &rrdev->flags)))
                        rrdev = NULL;

                r10_bio->devs[i].bio = NULL;
                r10_bio->devs[i].repl_bio = NULL;

                if (!rdev && !rrdev) {
                        set_bit(R10BIO_Degraded, &r10_bio->state);
                        continue;
                }
                if (rdev && test_bit(WriteErrorSeen, &rdev->flags)) {
                        sector_t first_bad;
                        sector_t dev_sector = r10_bio->devs[i].addr;
                        int bad_sectors;
                        int is_bad;

                        is_bad = is_badblock(rdev, dev_sector, max_sectors,
                                             &first_bad, &bad_sectors);
                        if (is_bad && first_bad <= dev_sector) {
                                /* Cannot write here at all */
                                bad_sectors -= (dev_sector - first_bad);
                                if (bad_sectors < max_sectors)
                                        /* Mustn't write more than bad_sectors
                                         * to other devices yet
                                         */
                                        max_sectors = bad_sectors;
                                /* We don't set R10BIO_Degraded as that
                                 * only applies if the disk is missing,
                                 * so it might be re-added, and we want to
                                 * know to recover this chunk.
                                 * In this case the device is here, and the
                                 * fact that this chunk is not in-sync is
                                 * recorded in the bad block log.
                                 */
                                continue;
                        }
                        if (is_bad) {
                                int good_sectors = first_bad - dev_sector;
                                if (good_sectors < max_sectors)
                                        max_sectors = good_sectors;
                        }
                }
                if (rdev) {
                        r10_bio->devs[i].bio = bio;
                        atomic_inc(&rdev->nr_pending);
                }
                if (rrdev) {
                        r10_bio->devs[i].repl_bio = bio;
                        atomic_inc(&rrdev->nr_pending);
                }
        }
        rcu_read_unlock();

        if (max_sectors < r10_bio->sectors)
                r10_bio->sectors = max_sectors;

        if (r10_bio->sectors < bio_sectors(bio)) {
                struct bio *split = bio_split(bio, r10_bio->sectors,
                                              GFP_NOIO, &conf->bio_split);
                bio_chain(split, bio);
                allow_barrier(conf);
                submit_bio_noacct(bio);
                wait_barrier(conf, false);
                bio = split;
                r10_bio->master_bio = bio;
        }

        if (blk_queue_io_stat(bio->bi_bdev->bd_disk->queue))
                r10_bio->start_time = bio_start_io_acct(bio);
        atomic_set(&r10_bio->remaining, 1);
        md_bitmap_startwrite(mddev->bitmap, r10_bio->sector, r10_bio->sectors, 0);

        for (i = 0; i < conf->copies; i++) {
                if (r10_bio->devs[i].bio)
                        raid10_write_one_disk(mddev, r10_bio, bio, false, i);
                if (r10_bio->devs[i].repl_bio)
                        raid10_write_one_disk(mddev, r10_bio, bio, true, i);
        }
        one_write_done(r10_bio);
}

static void __make_request(struct mddev *mddev, struct bio *bio, int sectors)
{
        struct r10conf *conf = mddev->private;
        struct r10bio *r10_bio;

        r10_bio = mempool_alloc(&conf->r10bio_pool, GFP_NOIO);

        r10_bio->master_bio = bio;
        r10_bio->sectors = sectors;

        r10_bio->mddev = mddev;
        r10_bio->sector = bio->bi_iter.bi_sector;
        r10_bio->state = 0;
        r10_bio->read_slot = -1;
        memset(r10_bio->devs, 0, sizeof(r10_bio->devs[0]) *
                        conf->geo.raid_disks);

        if (bio_data_dir(bio) == READ)
                raid10_read_request(mddev, bio, r10_bio);
        else
                raid10_write_request(mddev, bio, r10_bio);
}

static void raid_end_discard_bio(struct r10bio *r10bio)
{
        struct r10conf *conf = r10bio->mddev->private;
        struct r10bio *first_r10bio;

        while (atomic_dec_and_test(&r10bio->remaining)) {

                allow_barrier(conf);

                if (!test_bit(R10BIO_Discard, &r10bio->state)) {
                        first_r10bio = (struct r10bio *)r10bio->master_bio;
                        free_r10bio(r10bio);
                        r10bio = first_r10bio;
                } else {
                        md_write_end(r10bio->mddev);
                        bio_endio(r10bio->master_bio);
                        free_r10bio(r10bio);
                        break;
                }
        }
}

static void raid10_end_discard_request(struct bio *bio)
{
        struct r10bio *r10_bio = bio->bi_private;
        struct r10conf *conf = r10_bio->mddev->private;
        struct md_rdev *rdev = NULL;
        int dev;
        int slot, repl;

        /*
         * We don't care the return value of discard bio
         */
        if (!test_bit(R10BIO_Uptodate, &r10_bio->state))
                set_bit(R10BIO_Uptodate, &r10_bio->state);

        dev = find_bio_disk(conf, r10_bio, bio, &slot, &repl);
        if (repl)
                rdev = conf->mirrors[dev].replacement;
        if (!rdev) {
                /*
                 * raid10_remove_disk uses smp_mb to make sure rdev is set to
                 * replacement before setting replacement to NULL. It can read
                 * rdev first without barrier protect even replacment is NULL
                 */
                smp_rmb();
                rdev = conf->mirrors[dev].rdev;
        }

        raid_end_discard_bio(r10_bio);
        rdev_dec_pending(rdev, conf->mddev);
}

/*
 * There are some limitations to handle discard bio
 * 1st, the discard size is bigger than stripe_size*2.
 * 2st, if the discard bio spans reshape progress, we use the old way to
 * handle discard bio
 */
static int raid10_handle_discard(struct mddev *mddev, struct bio *bio)
{
        struct r10conf *conf = mddev->private;
        struct geom *geo = &conf->geo;
        int far_copies = geo->far_copies;
        bool first_copy = true;
        struct r10bio *r10_bio, *first_r10bio;
        struct bio *split;
        int disk;
        sector_t chunk;
        unsigned int stripe_size;
        unsigned int stripe_data_disks;
        sector_t split_size;
        sector_t bio_start, bio_end;
        sector_t first_stripe_index, last_stripe_index;
        sector_t start_disk_offset;
        unsigned int start_disk_index;
        sector_t end_disk_offset;
        unsigned int end_disk_index;
        unsigned int remainder;

        if (test_bit(MD_RECOVERY_RESHAPE, &mddev->recovery))
                return -EAGAIN;

        if (WARN_ON_ONCE(bio->bi_opf & REQ_NOWAIT)) {
                bio_wouldblock_error(bio);
                return 0;
        }
        wait_barrier(conf, false);

        /*
         * Check reshape again to avoid reshape happens after checking
         * MD_RECOVERY_RESHAPE and before wait_barrier
         */
        if (test_bit(MD_RECOVERY_RESHAPE, &mddev->recovery))
                goto out;

        if (geo->near_copies)
                stripe_data_disks = geo->raid_disks / geo->near_copies +
                                        geo->raid_disks % geo->near_copies;
        else
                stripe_data_disks = geo->raid_disks;

        stripe_size = stripe_data_disks << geo->chunk_shift;

        bio_start = bio->bi_iter.bi_sector;
        bio_end = bio_end_sector(bio);

        /*
         * Maybe one discard bio is smaller than strip size or across one
         * stripe and discard region is larger than one stripe size. For far
         * offset layout, if the discard region is not aligned with stripe
         * size, there is hole when we submit discard bio to member disk.
         * For simplicity, we only handle discard bio which discard region
         * is bigger than stripe_size * 2
         */
        if (bio_sectors(bio) < stripe_size*2)
                goto out;

        /*
         * Keep bio aligned with strip size.
         */
        div_u64_rem(bio_start, stripe_size, &remainder);
        if (remainder) {
                split_size = stripe_size - remainder;
                split = bio_split(bio, split_size, GFP_NOIO, &conf->bio_split);
                bio_chain(split, bio);
                allow_barrier(conf);
                /* Resend the fist split part */
                submit_bio_noacct(split);
                wait_barrier(conf, false);
        }
        div_u64_rem(bio_end, stripe_size, &remainder);
        if (remainder) {
                split_size = bio_sectors(bio) - remainder;
                split = bio_split(bio, split_size, GFP_NOIO, &conf->bio_split);
                bio_chain(split, bio);
                allow_barrier(conf);
                /* Resend the second split part */
                submit_bio_noacct(bio);
                bio = split;
                wait_barrier(conf, false);
        }

        bio_start = bio->bi_iter.bi_sector;
        bio_end = bio_end_sector(bio);

        /*
         * Raid10 uses chunk as the unit to store data. It's similar like raid0.
         * One stripe contains the chunks from all member disk (one chunk from
         * one disk at the same HBA address). For layout detail, see 'man md 4'
         */
        chunk = bio_start >> geo->chunk_shift;
        chunk *= geo->near_copies;
        first_stripe_index = chunk;
        start_disk_index = sector_div(first_stripe_index, geo->raid_disks);
        if (geo->far_offset)
                first_stripe_index *= geo->far_copies;
        start_disk_offset = (bio_start & geo->chunk_mask) +
                                (first_stripe_index << geo->chunk_shift);

        chunk = bio_end >> geo->chunk_shift;
        chunk *= geo->near_copies;
        last_stripe_index = chunk;
        end_disk_index = sector_div(last_stripe_index, geo->raid_disks);
        if (geo->far_offset)
                last_stripe_index *= geo->far_copies;
        end_disk_offset = (bio_end & geo->chunk_mask) +
                                (last_stripe_index << geo->chunk_shift);

retry_discard:
        r10_bio = mempool_alloc(&conf->r10bio_pool, GFP_NOIO);
        r10_bio->mddev = mddev;
        r10_bio->state = 0;
        r10_bio->sectors = 0;
        memset(r10_bio->devs, 0, sizeof(r10_bio->devs[0]) * geo->raid_disks);
        wait_blocked_dev(mddev, r10_bio);

        /*
         * For far layout it needs more than one r10bio to cover all regions.
         * Inspired by raid10_sync_request, we can use the first r10bio->master_bio
         * to record the discard bio. Other r10bio->master_bio record the first
         * r10bio. The first r10bio only release after all other r10bios finish.
         * The discard bio returns only first r10bio finishes
         */
        if (first_copy) {
                r10_bio->master_bio = bio;
                set_bit(R10BIO_Discard, &r10_bio->state);
                first_copy = false;
                first_r10bio = r10_bio;
        } else
                r10_bio->master_bio = (struct bio *)first_r10bio;

        /*
         * first select target devices under rcu_lock and
         * inc refcount on their rdev.  Record them by setting
         * bios[x] to bio
         */
        rcu_read_lock();
        for (disk = 0; disk < geo->raid_disks; disk++) {
                struct md_rdev *rdev = rcu_dereference(conf->mirrors[disk].rdev);
                struct md_rdev *rrdev = rcu_dereference(
                        conf->mirrors[disk].replacement);

                r10_bio->devs[disk].bio = NULL;
                r10_bio->devs[disk].repl_bio = NULL;

                if (rdev && (test_bit(Faulty, &rdev->flags)))
                        rdev = NULL;
                if (rrdev && (test_bit(Faulty, &rrdev->flags)))
                        rrdev = NULL;
                if (!rdev && !rrdev)
                        continue;

                if (rdev) {
                        r10_bio->devs[disk].bio = bio;
                        atomic_inc(&rdev->nr_pending);
                }
                if (rrdev) {
                        r10_bio->devs[disk].repl_bio = bio;
                        atomic_inc(&rrdev->nr_pending);
                }
        }
        rcu_read_unlock();

        atomic_set(&r10_bio->remaining, 1);
        for (disk = 0; disk < geo->raid_disks; disk++) {
                sector_t dev_start, dev_end;
                struct bio *mbio, *rbio = NULL;

                /*
                 * Now start to calculate the start and end address for each disk.
                 * The space between dev_start and dev_end is the discard region.
                 *
                 * For dev_start, it needs to consider three conditions:
                 * 1st, the disk is before start_disk, you can imagine the disk in
                 * the next stripe. So the dev_start is the start address of next
                 * stripe.
                 * 2st, the disk is after start_disk, it means the disk is at the
                 * same stripe of first disk
                 * 3st, the first disk itself, we can use start_disk_offset directly
                 */
                if (disk < start_disk_index)
                        dev_start = (first_stripe_index + 1) * mddev->chunk_sectors;
                else if (disk > start_disk_index)
                        dev_start = first_stripe_index * mddev->chunk_sectors;
                else
                        dev_start = start_disk_offset;

                if (disk < end_disk_index)
                        dev_end = (last_stripe_index + 1) * mddev->chunk_sectors;
                else if (disk > end_disk_index)
                        dev_end = last_stripe_index * mddev->chunk_sectors;
                else
                        dev_end = end_disk_offset;

                /*
                 * It only handles discard bio which size is >= stripe size, so
                 * dev_end > dev_start all the time.
                 * It doesn't need to use rcu lock to get rdev here. We already
                 * add rdev->nr_pending in the first loop.
                 */
                if (r10_bio->devs[disk].bio) {
                        struct md_rdev *rdev = conf->mirrors[disk].rdev;
                        mbio = bio_alloc_clone(bio->bi_bdev, bio, GFP_NOIO,
                                               &mddev->bio_set);
                        mbio->bi_end_io = raid10_end_discard_request;
                        mbio->bi_private = r10_bio;
                        r10_bio->devs[disk].bio = mbio;
                        r10_bio->devs[disk].devnum = disk;
                        atomic_inc(&r10_bio->remaining);
                        md_submit_discard_bio(mddev, rdev, mbio,
                                        dev_start + choose_data_offset(r10_bio, rdev),
                                        dev_end - dev_start);
                        bio_endio(mbio);
                }
                if (r10_bio->devs[disk].repl_bio) {
                        struct md_rdev *rrdev = conf->mirrors[disk].replacement;
                        rbio = bio_alloc_clone(bio->bi_bdev, bio, GFP_NOIO,
                                               &mddev->bio_set);
                        rbio->bi_end_io = raid10_end_discard_request;
                        rbio->bi_private = r10_bio;
                        r10_bio->devs[disk].repl_bio = rbio;
                        r10_bio->devs[disk].devnum = disk;
                        atomic_inc(&r10_bio->remaining);
                        md_submit_discard_bio(mddev, rrdev, rbio,
                                        dev_start + choose_data_offset(r10_bio, rrdev),
                                        dev_end - dev_start);
                        bio_endio(rbio);
                }
        }

        if (!geo->far_offset && --far_copies) {
                first_stripe_index += geo->stride >> geo->chunk_shift;
                start_disk_offset += geo->stride;
                last_stripe_index += geo->stride >> geo->chunk_shift;
                end_disk_offset += geo->stride;
                atomic_inc(&first_r10bio->remaining);
                raid_end_discard_bio(r10_bio);
                wait_barrier(conf, false);
                goto retry_discard;
        }

        raid_end_discard_bio(r10_bio);

        return 0;
out:
        allow_barrier(conf);
        return -EAGAIN;
}

static bool raid10_make_request(struct mddev *mddev, struct bio *bio)
{
        struct r10conf *conf = mddev->private;
        sector_t chunk_mask = (conf->geo.chunk_mask & conf->prev.chunk_mask);
        int chunk_sects = chunk_mask + 1;
        int sectors = bio_sectors(bio);

        if (unlikely(bio->bi_opf & REQ_PREFLUSH)
            && md_flush_request(mddev, bio))
                return true;

        if (!md_write_start(mddev, bio))
                return false;

        if (unlikely(bio_op(bio) == REQ_OP_DISCARD))
                if (!raid10_handle_discard(mddev, bio))
                        return true;

        /*
         * If this request crosses a chunk boundary, we need to split
         * it.
         */
        if (unlikely((bio->bi_iter.bi_sector & chunk_mask) +
                     sectors > chunk_sects
                     && (conf->geo.near_copies < conf->geo.raid_disks
                         || conf->prev.near_copies <
                         conf->prev.raid_disks)))
                sectors = chunk_sects -
                        (bio->bi_iter.bi_sector &
                         (chunk_sects - 1));
        __make_request(mddev, bio, sectors);

        /* In case raid10d snuck in to freeze_array */
        wake_up(&conf->wait_barrier);
        return true;
}

static void raid10_status(struct seq_file *seq, struct mddev *mddev)
{
        struct r10conf *conf = mddev->private;
        int i;

        if (conf->geo.near_copies < conf->geo.raid_disks)
                seq_printf(seq, " %dK chunks", mddev->chunk_sectors / 2);
        if (conf->geo.near_copies > 1)
                seq_printf(seq, " %d near-copies", conf->geo.near_copies);
        if (conf->geo.far_copies > 1) {
                if (conf->geo.far_offset)
                        seq_printf(seq, " %d offset-copies", conf->geo.far_copies);
                else
                        seq_printf(seq, " %d far-copies", conf->geo.far_copies);
                if (conf->geo.far_set_size != conf->geo.raid_disks)
                        seq_printf(seq, " %d devices per set", conf->geo.far_set_size);
        }
        seq_printf(seq, " [%d/%d] [", conf->geo.raid_disks,
                                        conf->geo.raid_disks - mddev->degraded);
        rcu_read_lock();
        for (i = 0; i < conf->geo.raid_disks; i++) {
                struct md_rdev *rdev = rcu_dereference(conf->mirrors[i].rdev);
                seq_printf(seq, "%s", rdev && test_bit(In_sync, &rdev->flags) ? "U" : "_");
        }
        rcu_read_unlock();
        seq_printf(seq, "]");
}

/* check if there are enough drives for
 * every block to appear on atleast one.
 * Don't consider the device numbered 'ignore'
 * as we might be about to remove it.
 */
static int _enough(struct r10conf *conf, int previous, int ignore)
{
        int first = 0;
        int has_enough = 0;
        int disks, ncopies;
        if (previous) {
                disks = conf->prev.raid_disks;
                ncopies = conf->prev.near_copies;
        } else {
                disks = conf->geo.raid_disks;
                ncopies = conf->geo.near_copies;
        }

        rcu_read_lock();
        do {
                int n = conf->copies;
                int cnt = 0;
                int this = first;
                while (n--) {
                        struct md_rdev *rdev;
                        if (this != ignore &&
                            (rdev = rcu_dereference(conf->mirrors[this].rdev)) &&
                            test_bit(In_sync, &rdev->flags))
                                cnt++;
                        this = (this+1) % disks;
                }
                if (cnt == 0)
                        goto out;
                first = (first + ncopies) % disks;
        } while (first != 0);
        has_enough = 1;
out:
        rcu_read_unlock();
        return has_enough;
}

static int enough(struct r10conf *conf, int ignore)
{
        /* when calling 'enough', both 'prev' and 'geo' must
         * be stable.
         * This is ensured if ->reconfig_mutex or ->device_lock
         * is held.
         */
        return _enough(conf, 0, ignore) &&
                _enough(conf, 1, ignore);
}

/**
 * raid10_error() - RAID10 error handler.
 * @mddev: affected md device.
 * @rdev: member device to fail.
 *
 * The routine acknowledges &rdev failure and determines new @mddev state.
 * If it failed, then:
 *      - &MD_BROKEN flag is set in &mddev->flags.
 * Otherwise, it must be degraded:
 *      - recovery is interrupted.
 *      - &mddev->degraded is bumped.

 * @rdev is marked as &Faulty excluding case when array is failed and
 * &mddev->fail_last_dev is off.
 */
static void raid10_error(struct mddev *mddev, struct md_rdev *rdev)
{
        struct r10conf *conf = mddev->private;
        unsigned long flags;

        spin_lock_irqsave(&conf->device_lock, flags);

        if (test_bit(In_sync, &rdev->flags) && !enough(conf, rdev->raid_disk)) {
                set_bit(MD_BROKEN, &mddev->flags);

                if (!mddev->fail_last_dev) {
                        spin_unlock_irqrestore(&conf->device_lock, flags);
                        return;
                }
        }
        if (test_and_clear_bit(In_sync, &rdev->flags))
                mddev->degraded++;

        set_bit(MD_RECOVERY_INTR, &mddev->recovery);
        set_bit(Blocked, &rdev->flags);
        set_bit(Faulty, &rdev->flags);
        set_mask_bits(&mddev->sb_flags, 0,
                      BIT(MD_SB_CHANGE_DEVS) | BIT(MD_SB_CHANGE_PENDING));
        spin_unlock_irqrestore(&conf->device_lock, flags);
        pr_crit("md/raid10:%s: Disk failure on %pg, disabling device.\n"
                "md/raid10:%s: Operation continuing on %d devices.\n",
                mdname(mddev), rdev->bdev,
                mdname(mddev), conf->geo.raid_disks - mddev->degraded);
}

static void print_conf(struct r10conf *conf)
{
        int i;
        struct md_rdev *rdev;

        pr_debug("RAID10 conf printout:\n");
        if (!conf) {
                pr_debug("(!conf)\n");
                return;
        }
        pr_debug(" --- wd:%d rd:%d\n", conf->geo.raid_disks - conf->mddev->degraded,
                 conf->geo.raid_disks);

        /* This is only called with ->reconfix_mutex held, so
         * rcu protection of rdev is not needed */
        for (i = 0; i < conf->geo.raid_disks; i++) {
                rdev = conf->mirrors[i].rdev;
                if (rdev)
                        pr_debug(" disk %d, wo:%d, o:%d, dev:%pg\n",
                                 i, !test_bit(In_sync, &rdev->flags),
                                 !test_bit(Faulty, &rdev->flags),
                                 rdev->bdev);
        }
}

static void close_sync(struct r10conf *conf)
{
        wait_barrier(conf, false);
        allow_barrier(conf);

        mempool_exit(&conf->r10buf_pool);
}

static int raid10_spare_active(struct mddev *mddev)
{
        int i;
        struct r10conf *conf = mddev->private;
        struct raid10_info *tmp;
        int count = 0;
        unsigned long flags;

        /*
         * Find all non-in_sync disks within the RAID10 configuration
         * and mark them in_sync
         */
        for (i = 0; i < conf->geo.raid_disks; i++) {
                tmp = conf->mirrors + i;
                if (tmp->replacement
                    && tmp->replacement->recovery_offset == MaxSector
                    && !test_bit(Faulty, &tmp->replacement->flags)
                    && !test_and_set_bit(In_sync, &tmp->replacement->flags)) {
                        /* Replacement has just become active */
                        if (!tmp->rdev
                            || !test_and_clear_bit(In_sync, &tmp->rdev->flags))
                                count++;
                        if (tmp->rdev) {
                                /* Replaced device not technically faulty,
                                 * but we need to be sure it gets removed
                                 * and never re-added.
                                 */
                                set_bit(Faulty, &tmp->rdev->flags);
                                sysfs_notify_dirent_safe(
                                        tmp->rdev->sysfs_state);
                        }
                        sysfs_notify_dirent_safe(tmp->replacement->sysfs_state);
                } else if (tmp->rdev
                           && tmp->rdev->recovery_offset == MaxSector
                           && !test_bit(Faulty, &tmp->rdev->flags)
                           && !test_and_set_bit(In_sync, &tmp->rdev->flags)) {
                        count++;
                        sysfs_notify_dirent_safe(tmp->rdev->sysfs_state);
                }
        }
        spin_lock_irqsave(&conf->device_lock, flags);
        mddev->degraded -= count;
        spin_unlock_irqrestore(&conf->device_lock, flags);

        print_conf(conf);
        return count;
}

static int raid10_add_disk(struct mddev *mddev, struct md_rdev *rdev)
{
        struct r10conf *conf = mddev->private;
        int err = -EEXIST;
        int mirror;
        int first = 0;
        int last = conf->geo.raid_disks - 1;

        if (mddev->recovery_cp < MaxSector)
                /* only hot-add to in-sync arrays, as recovery is
                 * very different from resync
                 */
                return -EBUSY;
        if (rdev->saved_raid_disk < 0 && !_enough(conf, 1, -1))
                return -EINVAL;

        if (md_integrity_add_rdev(rdev, mddev))
                return -ENXIO;

        if (rdev->raid_disk >= 0)
                first = last = rdev->raid_disk;

        if (rdev->saved_raid_disk >= first &&
            rdev->saved_raid_disk < conf->geo.raid_disks &&
            conf->mirrors[rdev->saved_raid_disk].rdev == NULL)
                mirror = rdev->saved_raid_disk;
        else
                mirror = first;
        for ( ; mirror <= last ; mirror++) {
                struct raid10_info *p = &conf->mirrors[mirror];
                if (p->recovery_disabled == mddev->recovery_disabled)
                        continue;
                if (p->rdev) {
                        if (!test_bit(WantReplacement, &p->rdev->flags) ||
                            p->replacement != NULL)
                                continue;
                        clear_bit(In_sync, &rdev->flags);
                        set_bit(Replacement, &rdev->flags);
                        rdev->raid_disk = mirror;
                        err = 0;
                        if (mddev->gendisk)
                                disk_stack_limits(mddev->gendisk, rdev->bdev,
                                                  rdev->data_offset << 9);
                        conf->fullsync = 1;
                        rcu_assign_pointer(p->replacement, rdev);
                        break;
                }

                if (mddev->gendisk)
                        disk_stack_limits(mddev->gendisk, rdev->bdev,
                                          rdev->data_offset << 9);

                p->head_position = 0;
                p->recovery_disabled = mddev->recovery_disabled - 1;
                rdev->raid_disk = mirror;
                err = 0;
                if (rdev->saved_raid_disk != mirror)
                        conf->fullsync = 1;
                rcu_assign_pointer(p->rdev, rdev);
                break;
        }

        print_conf(conf);
        return err;
}

static int raid10_remove_disk(struct mddev *mddev, struct md_rdev *rdev)
{
        struct r10conf *conf = mddev->private;
        int err = 0;
        int number = rdev->raid_disk;
        struct md_rdev **rdevp;
        struct raid10_info *p;

        print_conf(conf);
        if (unlikely(number >= mddev->raid_disks))
                return 0;
        p = conf->mirrors + number;
        if (rdev == p->rdev)
                rdevp = &p->rdev;
        else if (rdev == p->replacement)
                rdevp = &p->replacement;
        else
                return 0;

        if (test_bit(In_sync, &rdev->flags) ||
            atomic_read(&rdev->nr_pending)) {
                err = -EBUSY;
                goto abort;
        }
        /* Only remove non-faulty devices if recovery
         * is not possible.
         */
        if (!test_bit(Faulty, &rdev->flags) &&
            mddev->recovery_disabled != p->recovery_disabled &&
            (!p->replacement || p->replacement == rdev) &&
            number < conf->geo.raid_disks &&
            enough(conf, -1)) {
                err = -EBUSY;
                goto abort;
        }
        *rdevp = NULL;
        if (!test_bit(RemoveSynchronized, &rdev->flags)) {
                synchronize_rcu();
                if (atomic_read(&rdev->nr_pending)) {
                        /* lost the race, try later */
                        err = -EBUSY;
                        *rdevp = rdev;
                        goto abort;
                }
        }
        if (p->replacement) {
                /* We must have just cleared 'rdev' */
                p->rdev = p->replacement;
                clear_bit(Replacement, &p->replacement->flags);
                smp_mb(); /* Make sure other CPUs may see both as identical
                           * but will never see neither -- if they are careful.
                           */
                p->replacement = NULL;
        }

        clear_bit(WantReplacement, &rdev->flags);
        err = md_integrity_register(mddev);

abort:

        print_conf(conf);
        return err;
}

static void __end_sync_read(struct r10bio *r10_bio, struct bio *bio, int d)
{
        struct r10conf *conf = r10_bio->mddev->private;

        if (!bio->bi_status)
                set_bit(R10BIO_Uptodate, &r10_bio->state);
        else
                /* The write handler will notice the lack of
                 * R10BIO_Uptodate and record any errors etc
                 */
                atomic_add(r10_bio->sectors,
                           &conf->mirrors[d].rdev->corrected_errors);

        /* for reconstruct, we always reschedule after a read.
         * for resync, only after all reads
         */
        rdev_dec_pending(conf->mirrors[d].rdev, conf->mddev);
        if (test_bit(R10BIO_IsRecover, &r10_bio->state) ||
            atomic_dec_and_test(&r10_bio->remaining)) {
                /* we have read all the blocks,
                 * do the comparison in process context in raid10d
                 */
                reschedule_retry(r10_bio);
        }
}

static void end_sync_read(struct bio *bio)
{
        struct r10bio *r10_bio = get_resync_r10bio(bio);
        struct r10conf *conf = r10_bio->mddev->private;
        int d = find_bio_disk(conf, r10_bio, bio, NULL, NULL);

        __end_sync_read(r10_bio, bio, d);
}

static void end_reshape_read(struct bio *bio)
{
        /* reshape read bio isn't allocated from r10buf_pool */
        struct r10bio *r10_bio = bio->bi_private;

        __end_sync_read(r10_bio, bio, r10_bio->read_slot);
}

static void end_sync_request(struct r10bio *r10_bio)
{
        struct mddev *mddev = r10_bio->mddev;

        while (atomic_dec_and_test(&r10_bio->remaining)) {
                if (r10_bio->master_bio == NULL) {
                        /* the primary of several recovery bios */
                        sector_t s = r10_bio->sectors;
                        if (test_bit(R10BIO_MadeGood, &r10_bio->state) ||
                            test_bit(R10BIO_WriteError, &r10_bio->state))
                                reschedule_retry(r10_bio);
                        else
                                put_buf(r10_bio);
                        md_done_sync(mddev, s, 1);
                        break;
                } else {
                        struct r10bio *r10_bio2 = (struct r10bio *)r10_bio->master_bio;
                        if (test_bit(R10BIO_MadeGood, &r10_bio->state) ||
                            test_bit(R10BIO_WriteError, &r10_bio->state))
                                reschedule_retry(r10_bio);
                        else
                                put_buf(r10_bio);
                        r10_bio = r10_bio2;
                }
        }
}

static void end_sync_write(struct bio *bio)
{
        struct r10bio *r10_bio = get_resync_r10bio(bio);
        struct mddev *mddev = r10_bio->mddev;
        struct r10conf *conf = mddev->private;
        int d;
        sector_t first_bad;
        int bad_sectors;
        int slot;
        int repl;
        struct md_rdev *rdev = NULL;

        d = find_bio_disk(conf, r10_bio, bio, &slot, &repl);
        if (repl)
                rdev = conf->mirrors[d].replacement;
        else
                rdev = conf->mirrors[d].rdev;

        if (bio->bi_status) {
                if (repl)
                        md_error(mddev, rdev);
                else {
                        set_bit(WriteErrorSeen, &rdev->flags);
                        if (!test_and_set_bit(WantReplacement, &rdev->flags))
                                set_bit(MD_RECOVERY_NEEDED,
                                        &rdev->mddev->recovery);
                        set_bit(R10BIO_WriteError, &r10_bio->state);
                }
        } else if (is_badblock(rdev,
                             r10_bio->devs[slot].addr,
                             r10_bio->sectors,
                             &first_bad, &bad_sectors))
                set_bit(R10BIO_MadeGood, &r10_bio->state);

        rdev_dec_pending(rdev, mddev);

        end_sync_request(r10_bio);
}

/*
 * Note: sync and recover and handled very differently for raid10
 * This code is for resync.
 * For resync, we read through virtual addresses and read all blocks.
 * If there is any error, we schedule a write.  The lowest numbered
 * drive is authoritative.
 * However requests come for physical address, so we need to map.
 * For every physical address there are raid_disks/copies virtual addresses,
 * which is always are least one, but is not necessarly an integer.
 * This means that a physical address can span multiple chunks, so we may
 * have to submit multiple io requests for a single sync request.
 */
/*
 * We check if all blocks are in-sync and only write to blocks that
 * aren't in sync
 */
static void sync_request_write(struct mddev *mddev, struct r10bio *r10_bio)
{
        struct r10conf *conf = mddev->private;
        int i, first;
        struct bio *tbio, *fbio;
        int vcnt;
        struct page **tpages, **fpages;

        atomic_set(&r10_bio->remaining, 1);

        /* find the first device with a block */
        for (i=0; i<conf->copies; i++)
                if (!r10_bio->devs[i].bio->bi_status)
                        break;

        if (i == conf->copies)
                goto done;

        first = i;
        fbio = r10_bio->devs[i].bio;
        fbio->bi_iter.bi_size = r10_bio->sectors << 9;
        fbio->bi_iter.bi_idx = 0;
        fpages = get_resync_pages(fbio)->pages;

        vcnt = (r10_bio->sectors + (PAGE_SIZE >> 9) - 1) >> (PAGE_SHIFT - 9);
        /* now find blocks with errors */
        for (i=0 ; i < conf->copies ; i++) {
                int  j, d;
                struct md_rdev *rdev;
                struct resync_pages *rp;

                tbio = r10_bio->devs[i].bio;

                if (tbio->bi_end_io != end_sync_read)
                        continue;
                if (i == first)
                        continue;

                tpages = get_resync_pages(tbio)->pages;
                d = r10_bio->devs[i].devnum;
                rdev = conf->mirrors[d].rdev;
                if (!r10_bio->devs[i].bio->bi_status) {
                        /* We know that the bi_io_vec layout is the same for
                         * both 'first' and 'i', so we just compare them.
                         * All vec entries are PAGE_SIZE;
                         */
                        int sectors = r10_bio->sectors;
                        for (j = 0; j < vcnt; j++) {
                                int len = PAGE_SIZE;
                                if (sectors < (len / 512))
                                        len = sectors * 512;
                                if (memcmp(page_address(fpages[j]),
                                           page_address(tpages[j]),
                                           len))
                                        break;
                                sectors -= len/512;
                        }
                        if (j == vcnt)
                                continue;
                        atomic64_add(r10_bio->sectors, &mddev->resync_mismatches);
                        if (test_bit(MD_RECOVERY_CHECK, &mddev->recovery))
                                /* Don't fix anything. */
                                continue;
                } else if (test_bit(FailFast, &rdev->flags)) {
                        /* Just give up on this device */
                        md_error(rdev->mddev, rdev);
                        continue;
                }
                /* Ok, we need to write this bio, either to correct an
                 * inconsistency or to correct an unreadable block.
                 * First we need to fixup bv_offset, bv_len and
                 * bi_vecs, as the read request might have corrupted these
                 */
                rp = get_resync_pages(tbio);
                bio_reset(tbio, conf->mirrors[d].rdev->bdev, REQ_OP_WRITE);

                md_bio_reset_resync_pages(tbio, rp, fbio->bi_iter.bi_size);

                rp->raid_bio = r10_bio;
                tbio->bi_private = rp;
                tbio->bi_iter.bi_sector = r10_bio->devs[i].addr;
                tbio->bi_end_io = end_sync_write;

                bio_copy_data(tbio, fbio);

                atomic_inc(&conf->mirrors[d].rdev->nr_pending);
                atomic_inc(&r10_bio->remaining);
                md_sync_acct(conf->mirrors[d].rdev->bdev, bio_sectors(tbio));

                if (test_bit(FailFast, &conf->mirrors[d].rdev->flags))
                        tbio->bi_opf |= MD_FAILFAST;
                tbio->bi_iter.bi_sector += conf->mirrors[d].rdev->data_offset;
                submit_bio_noacct(tbio);
        }

        /* Now write out to any replacement devices
         * that are active
         */
        for (i = 0; i < conf->copies; i++) {
                int d;

                tbio = r10_bio->devs[i].repl_bio;
                if (!tbio || !tbio->bi_end_io)
                        continue;
                if (r10_bio->devs[i].bio->bi_end_io != end_sync_write
                    && r10_bio->devs[i].bio != fbio)
                        bio_copy_data(tbio, fbio);
                d = r10_bio->devs[i].devnum;
                atomic_inc(&r10_bio->remaining);
                md_sync_acct(conf->mirrors[d].replacement->bdev,
                             bio_sectors(tbio));
                submit_bio_noacct(tbio);
        }

done:
        if (atomic_dec_and_test(&r10_bio->remaining)) {
                md_done_sync(mddev, r10_bio->sectors, 1);
                put_buf(r10_bio);
        }
}

/*
 * Now for the recovery code.
 * Recovery happens across physical sectors.
 * We recover all non-is_sync drives by finding the virtual address of
 * each, and then choose a working drive that also has that virt address.
 * There is a separate r10_bio for each non-in_sync drive.
 * Only the first two slots are in use. The first for reading,
 * The second for writing.
 *
 */
static void fix_recovery_read_error(struct r10bio *r10_bio)
{
        /* We got a read error during recovery.
         * We repeat the read in smaller page-sized sections.
         * If a read succeeds, write it to the new device or record
         * a bad block if we cannot.
         * If a read fails, record a bad block on both old and
         * new devices.
         */
        struct mddev *mddev = r10_bio->mddev;
        struct r10conf *conf = mddev->private;
        struct bio *bio = r10_bio->devs[0].bio;
        sector_t sect = 0;
        int sectors = r10_bio->sectors;
        int idx = 0;
        int dr = r10_bio->devs[0].devnum;
        int dw = r10_bio->devs[1].devnum;
        struct page **pages = get_resync_pages(bio)->pages;

        while (sectors) {
                int s = sectors;
                struct md_rdev *rdev;
                sector_t addr;
                int ok;

                if (s > (PAGE_SIZE>>9))
                        s = PAGE_SIZE >> 9;

                rdev = conf->mirrors[dr].rdev;
                addr = r10_bio->devs[0].addr + sect,
                ok = sync_page_io(rdev,
                                  addr,
                                  s << 9,
                                  pages[idx],
                                  REQ_OP_READ, false);
                if (ok) {
                        rdev = conf->mirrors[dw].rdev;
                        addr = r10_bio->devs[1].addr + sect;
                        ok = sync_page_io(rdev,
                                          addr,
                                          s << 9,
                                          pages[idx],
                                          REQ_OP_WRITE, false);
                        if (!ok) {
                                set_bit(WriteErrorSeen, &rdev->flags);
                                if (!test_and_set_bit(WantReplacement,
                                                      &rdev->flags))
                                        set_bit(MD_RECOVERY_NEEDED,
                                                &rdev->mddev->recovery);
                        }
                }
                if (!ok) {
                        /* We don't worry if we cannot set a bad block -
                         * it really is bad so there is no loss in not
                         * recording it yet
                         */
                        rdev_set_badblocks(rdev, addr, s, 0);

                        if (rdev != conf->mirrors[dw].rdev) {
                                /* need bad block on destination too */
                                struct md_rdev *rdev2 = conf->mirrors[dw].rdev;
                                addr = r10_bio->devs[1].addr + sect;
                                ok = rdev_set_badblocks(rdev2, addr, s, 0);
                                if (!ok) {
                                        /* just abort the recovery */
                                        pr_notice("md/raid10:%s: recovery aborted due to read error\n",
                                                  mdname(mddev));

                                        conf->mirrors[dw].recovery_disabled
                                                = mddev->recovery_disabled;
                                        set_bit(MD_RECOVERY_INTR,
                                                &mddev->recovery);
                                        break;
                                }
                        }
                }

                sectors -= s;
                sect += s;
                idx++;
        }
}

static void recovery_request_write(struct mddev *mddev, struct r10bio *r10_bio)
{
        struct r10conf *conf = mddev->private;
        int d;
        struct bio *wbio, *wbio2;

        if (!test_bit(R10BIO_Uptodate, &r10_bio->state)) {
                fix_recovery_read_error(r10_bio);
                end_sync_request(r10_bio);
                return;
        }

        /*
         * share the pages with the first bio
         * and submit the write request
         */
        d = r10_bio->devs[1].devnum;
        wbio = r10_bio->devs[1].bio;
        wbio2 = r10_bio->devs[1].repl_bio;
        /* Need to test wbio2->bi_end_io before we call
         * submit_bio_noacct as if the former is NULL,
         * the latter is free to free wbio2.
         */
        if (wbio2 && !wbio2->bi_end_io)
                wbio2 = NULL;
        if (wbio->bi_end_io) {
                atomic_inc(&conf->mirrors[d].rdev->nr_pending);
                md_sync_acct(conf->mirrors[d].rdev->bdev, bio_sectors(wbio));
                submit_bio_noacct(wbio);
        }
        if (wbio2) {
                atomic_inc(&conf->mirrors[d].replacement->nr_pending);
                md_sync_acct(conf->mirrors[d].replacement->bdev,
                             bio_sectors(wbio2));
                submit_bio_noacct(wbio2);
        }
}

/*
 * Used by fix_read_error() to decay the per rdev read_errors.
 * We halve the read error count for every hour that has elapsed
 * since the last recorded read error.
 *
 */
static void check_decay_read_errors(struct mddev *mddev, struct md_rdev *rdev)
{
        long cur_time_mon;
        unsigned long hours_since_last;
        unsigned int read_errors = atomic_read(&rdev->read_errors);

        cur_time_mon = ktime_get_seconds();

        if (rdev->last_read_error == 0) {
                /* first time we've seen a read error */
                rdev->last_read_error = cur_time_mon;
                return;
        }

        hours_since_last = (long)(cur_time_mon -
                            rdev->last_read_error) / 3600;

        rdev->last_read_error = cur_time_mon;

        /*
         * if hours_since_last is > the number of bits in read_errors
         * just set read errors to 0. We do this to avoid
         * overflowing the shift of read_errors by hours_since_last.
         */
        if (hours_since_last >= 8 * sizeof(read_errors))
                atomic_set(&rdev->read_errors, 0);
        else
                atomic_set(&rdev->read_errors, read_errors >> hours_since_last);
}

static int r10_sync_page_io(struct md_rdev *rdev, sector_t sector,
                            int sectors, struct page *page, int rw)
{
        sector_t first_bad;
        int bad_sectors;

        if (is_badblock(rdev, sector, sectors, &first_bad, &bad_sectors)
            && (rw == READ || test_bit(WriteErrorSeen, &rdev->flags)))
                return -1;
        if (sync_page_io(rdev, sector, sectors << 9, page, rw, false))
                /* success */
                return 1;
        if (rw == WRITE) {
                set_bit(WriteErrorSeen, &rdev->flags);
                if (!test_and_set_bit(WantReplacement, &rdev->flags))
                        set_bit(MD_RECOVERY_NEEDED,
                                &rdev->mddev->recovery);
        }
        /* need to record an error - either for the block or the device */
        if (!rdev_set_badblocks(rdev, sector, sectors, 0))
                md_error(rdev->mddev, rdev);
        return 0;
}

/*
 * This is a kernel thread which:
 *
 *      1.      Retries failed read operations on working mirrors.
 *      2.      Updates the raid superblock when problems encounter.
 *      3.      Performs writes following reads for array synchronising.
 */

static void fix_read_error(struct r10conf *conf, struct mddev *mddev, struct r10bio *r10_bio)
{
        int sect = 0; /* Offset from r10_bio->sector */
        int sectors = r10_bio->sectors;
        struct md_rdev *rdev;
        int max_read_errors = atomic_read(&mddev->max_corr_read_errors);
        int d = r10_bio->devs[r10_bio->read_slot].devnum;

        /* still own a reference to this rdev, so it cannot
         * have been cleared recently.
         */
        rdev = conf->mirrors[d].rdev;

        if (test_bit(Faulty, &rdev->flags))
                /* drive has already been failed, just ignore any
                   more fix_read_error() attempts */
                return;

        check_decay_read_errors(mddev, rdev);
        atomic_inc(&rdev->read_errors);
        if (atomic_read(&rdev->read_errors) > max_read_errors) {
                pr_notice("md/raid10:%s: %pg: Raid device exceeded read_error threshold [cur %d:max %d]\n",
                          mdname(mddev), rdev->bdev,
                          atomic_read(&rdev->read_errors), max_read_errors);
                pr_notice("md/raid10:%s: %pg: Failing raid device\n",
                          mdname(mddev), rdev->bdev);
                md_error(mddev, rdev);
                r10_bio->devs[r10_bio->read_slot].bio = IO_BLOCKED;
                return;
        }

        while(sectors) {
                int s = sectors;
                int sl = r10_bio->read_slot;
                int success = 0;
                int start;

                if (s > (PAGE_SIZE>>9))
                        s = PAGE_SIZE >> 9;

                rcu_read_lock();
                do {
                        sector_t first_bad;
                        int bad_sectors;

                        d = r10_bio->devs[sl].devnum;
                        rdev = rcu_dereference(conf->mirrors[d].rdev);
                        if (rdev &&
                            test_bit(In_sync, &rdev->flags) &&
                            !test_bit(Faulty, &rdev->flags) &&
                            is_badblock(rdev, r10_bio->devs[sl].addr + sect, s,
                                        &first_bad, &bad_sectors) == 0) {
                                atomic_inc(&rdev->nr_pending);
                                rcu_read_unlock();
                                success = sync_page_io(rdev,
                                                       r10_bio->devs[sl].addr +
                                                       sect,
                                                       s<<9,
                                                       conf->tmppage,
                                                       REQ_OP_READ, false);
                                rdev_dec_pending(rdev, mddev);
                                rcu_read_lock();
                                if (success)
                                        break;
                        }
                        sl++;
                        if (sl == conf->copies)
                                sl = 0;
                } while (!success && sl != r10_bio->read_slot);
                rcu_read_unlock();

                if (!success) {
                        /* Cannot read from anywhere, just mark the block
                         * as bad on the first device to discourage future
                         * reads.
                         */
                        int dn = r10_bio->devs[r10_bio->read_slot].devnum;
                        rdev = conf->mirrors[dn].rdev;

                        if (!rdev_set_badblocks(
                                    rdev,
                                    r10_bio->devs[r10_bio->read_slot].addr
                                    + sect,
                                    s, 0)) {
                                md_error(mddev, rdev);
                                r10_bio->devs[r10_bio->read_slot].bio
                                        = IO_BLOCKED;
                        }
                        break;
                }

                start = sl;
                /* write it back and re-read */
                rcu_read_lock();
                while (sl != r10_bio->read_slot) {
                        if (sl==0)
                                sl = conf->copies;
                        sl--;
                        d = r10_bio->devs[sl].devnum;
                        rdev = rcu_dereference(conf->mirrors[d].rdev);
                        if (!rdev ||
                            test_bit(Faulty, &rdev->flags) ||
                            !test_bit(In_sync, &rdev->flags))
                                continue;

                        atomic_inc(&rdev->nr_pending);
                        rcu_read_unlock();
                        if (r10_sync_page_io(rdev,
                                             r10_bio->devs[sl].addr +
                                             sect,
                                             s, conf->tmppage, WRITE)
                            == 0) {
                                /* Well, this device is dead */
                                pr_notice("md/raid10:%s: read correction write failed (%d sectors at %llu on %pg)\n",
                                          mdname(mddev), s,
                                          (unsigned long long)(
                                                  sect +
                                                  choose_data_offset(r10_bio,
                                                                     rdev)),
                                          rdev->bdev);
                                pr_notice("md/raid10:%s: %pg: failing drive\n",
                                          mdname(mddev),
                                          rdev->bdev);
                        }
                        rdev_dec_pending(rdev, mddev);
                        rcu_read_lock();
                }
                sl = start;
                while (sl != r10_bio->read_slot) {
                        if (sl==0)
                                sl = conf->copies;
                        sl--;
                        d = r10_bio->devs[sl].devnum;
                        rdev = rcu_dereference(conf->mirrors[d].rdev);
                        if (!rdev ||
                            test_bit(Faulty, &rdev->flags) ||
                            !test_bit(In_sync, &rdev->flags))
                                continue;

                        atomic_inc(&rdev->nr_pending);
                        rcu_read_unlock();
                        switch (r10_sync_page_io(rdev,
                                             r10_bio->devs[sl].addr +
                                             sect,
                                             s, conf->tmppage,
                                                 READ)) {
                        case 0:
                                /* Well, this device is dead */
                                pr_notice("md/raid10:%s: unable to read back corrected sectors (%d sectors at %llu on %pg)\n",
                                       mdname(mddev), s,
                                       (unsigned long long)(
                                               sect +
                                               choose_data_offset(r10_bio, rdev)),
                                       rdev->bdev);
                                pr_notice("md/raid10:%s: %pg: failing drive\n",
                                       mdname(mddev),
                                       rdev->bdev);
                                break;
                        case 1:
                                pr_info("md/raid10:%s: read error corrected (%d sectors at %llu on %pg)\n",
                                       mdname(mddev), s,
                                       (unsigned long long)(
                                               sect +
                                               choose_data_offset(r10_bio, rdev)),
                                       rdev->bdev);
                                atomic_add(s, &rdev->corrected_errors);
                        }

                        rdev_dec_pending(rdev, mddev);
                        rcu_read_lock();
                }
                rcu_read_unlock();

                sectors -= s;
                sect += s;
        }
}

static int narrow_write_error(struct r10bio *r10_bio, int i)
{
        struct bio *bio = r10_bio->master_bio;
        struct mddev *mddev = r10_bio->mddev;
        struct r10conf *conf = mddev->private;
        struct md_rdev *rdev = conf->mirrors[r10_bio->devs[i].devnum].rdev;
        /* bio has the data to be written to slot 'i' where
         * we just recently had a write error.
         * We repeatedly clone the bio and trim down to one block,
         * then try the write.  Where the write fails we record
         * a bad block.
         * It is conceivable that the bio doesn't exactly align with
         * blocks.  We must handle this.
         *
         * We currently own a reference to the rdev.
         */

        int block_sectors;
        sector_t sector;
        int sectors;
        int sect_to_write = r10_bio->sectors;
        int ok = 1;

        if (rdev->badblocks.shift < 0)
                return 0;

        block_sectors = roundup(1 << rdev->badblocks.shift,
                                bdev_logical_block_size(rdev->bdev) >> 9);
        sector = r10_bio->sector;
        sectors = ((r10_bio->sector + block_sectors)
                   & ~(sector_t)(block_sectors - 1))
                - sector;

        while (sect_to_write) {
                struct bio *wbio;
                sector_t wsector;
                if (sectors > sect_to_write)
                        sectors = sect_to_write;
                /* Write at 'sector' for 'sectors' */
                wbio = bio_alloc_clone(rdev->bdev, bio, GFP_NOIO,
                                       &mddev->bio_set);
                bio_trim(wbio, sector - bio->bi_iter.bi_sector, sectors);
                wsector = r10_bio->devs[i].addr + (sector - r10_bio->sector);
                wbio->bi_iter.bi_sector = wsector +
                                   choose_data_offset(r10_bio, rdev);
                bio_set_op_attrs(wbio, REQ_OP_WRITE, 0);

                if (submit_bio_wait(wbio) < 0)
                        /* Failure! */
                        ok = rdev_set_badblocks(rdev, wsector,
                                                sectors, 0)
                                && ok;

                bio_put(wbio);
                sect_to_write -= sectors;
                sector += sectors;
                sectors = block_sectors;
        }
        return ok;
}

static void handle_read_error(struct mddev *mddev, struct r10bio *r10_bio)
{
        int slot = r10_bio->read_slot;
        struct bio *bio;
        struct r10conf *conf = mddev->private;
        struct md_rdev *rdev = r10_bio->devs[slot].rdev;

        /* we got a read error. Maybe the drive is bad.  Maybe just
         * the block and we can fix it.
         * We freeze all other IO, and try reading the block from
         * other devices.  When we find one, we re-write
         * and check it that fixes the read error.
         * This is all done synchronously while the array is
         * frozen.
         */
        bio = r10_bio->devs[slot].bio;
        bio_put(bio);
        r10_bio->devs[slot].bio = NULL;

        if (mddev->ro)
                r10_bio->devs[slot].bio = IO_BLOCKED;
        else if (!test_bit(FailFast, &rdev->flags)) {
                freeze_array(conf, 1);
                fix_read_error(conf, mddev, r10_bio);
                unfreeze_array(conf);
        } else
                md_error(mddev, rdev);

        rdev_dec_pending(rdev, mddev);
        allow_barrier(conf);
        r10_bio->state = 0;
        raid10_read_request(mddev, r10_bio->master_bio, r10_bio);
}

static void handle_write_completed(struct r10conf *conf, struct r10bio *r10_bio)
{
        /* Some sort of write request has finished and it
         * succeeded in writing where we thought there was a
         * bad block.  So forget the bad block.
         * Or possibly if failed and we need to record
         * a bad block.
         */
        int m;
        struct md_rdev *rdev;

        if (test_bit(R10BIO_IsSync, &r10_bio->state) ||
            test_bit(R10BIO_IsRecover, &r10_bio->state)) {
                for (m = 0; m < conf->copies; m++) {
                        int dev = r10_bio->devs[m].devnum;
                        rdev = conf->mirrors[dev].rdev;
                        if (r10_bio->devs[m].bio == NULL ||
                                r10_bio->devs[m].bio->bi_end_io == NULL)
                                continue;
                        if (!r10_bio->devs[m].bio->bi_status) {
                                rdev_clear_badblocks(
                                        rdev,
                                        r10_bio->devs[m].addr,
                                        r10_bio->sectors, 0);
                        } else {
                                if (!rdev_set_badblocks(
                                            rdev,
                                            r10_bio->devs[m].addr,
                                            r10_bio->sectors, 0))
                                        md_error(conf->mddev, rdev);
                        }
                        rdev = conf->mirrors[dev].replacement;
                        if (r10_bio->devs[m].repl_bio == NULL ||
                                r10_bio->devs[m].repl_bio->bi_end_io == NULL)
                                continue;

                        if (!r10_bio->devs[m].repl_bio->bi_status) {
                                rdev_clear_badblocks(
                                        rdev,
                                        r10_bio->devs[m].addr,
                                        r10_bio->sectors, 0);
                        } else {
                                if (!rdev_set_badblocks(
                                            rdev,
                                            r10_bio->devs[m].addr,
                                            r10_bio->sectors, 0))
                                        md_error(conf->mddev, rdev);
                        }
                }
                put_buf(r10_bio);
        } else {
                bool fail = false;
                for (m = 0; m < conf->copies; m++) {
                        int dev = r10_bio->devs[m].devnum;
                        struct bio *bio = r10_bio->devs[m].bio;
                        rdev = conf->mirrors[dev].rdev;
                        if (bio == IO_MADE_GOOD) {
                                rdev_clear_badblocks(
                                        rdev,
                                        r10_bio->devs[m].addr,
                                        r10_bio->sectors, 0);
                                rdev_dec_pending(rdev, conf->mddev);
                        } else if (bio != NULL && bio->bi_status) {
                                fail = true;
                                if (!narrow_write_error(r10_bio, m)) {
                                        md_error(conf->mddev, rdev);
                                        set_bit(R10BIO_Degraded,
                                                &r10_bio->state);
                                }
                                rdev_dec_pending(rdev, conf->mddev);
                        }
                        bio = r10_bio->devs[m].repl_bio;
                        rdev = conf->mirrors[dev].replacement;
                        if (rdev && bio == IO_MADE_GOOD) {
                                rdev_clear_badblocks(
                                        rdev,
                                        r10_bio->devs[m].addr,
                                        r10_bio->sectors, 0);
                                rdev_dec_pending(rdev, conf->mddev);
                        }
                }
                if (fail) {
                        spin_lock_irq(&conf->device_lock);
                        list_add(&r10_bio->retry_list, &conf->bio_end_io_list);
                        conf->nr_queued++;
                        spin_unlock_irq(&conf->device_lock);
                        /*
                         * In case freeze_array() is waiting for condition
                         * nr_pending == nr_queued + extra to be true.
                         */
                        wake_up(&conf->wait_barrier);
                        md_wakeup_thread(conf->mddev->thread);
                } else {
                        if (test_bit(R10BIO_WriteError,
                                     &r10_bio->state))
                                close_write(r10_bio);
                        raid_end_bio_io(r10_bio);
                }
        }
}

static void raid10d(struct md_thread *thread)
{
        struct mddev *mddev = thread->mddev;
        struct r10bio *r10_bio;
        unsigned long flags;
        struct r10conf *conf = mddev->private;
        struct list_head *head = &conf->retry_list;
        struct blk_plug plug;

        md_check_recovery(mddev);

        if (!list_empty_careful(&conf->bio_end_io_list) &&
            !test_bit(MD_SB_CHANGE_PENDING, &mddev->sb_flags)) {
                LIST_HEAD(tmp);
                spin_lock_irqsave(&conf->device_lock, flags);
                if (!test_bit(MD_SB_CHANGE_PENDING, &mddev->sb_flags)) {
                        while (!list_empty(&conf->bio_end_io_list)) {
                                list_move(conf->bio_end_io_list.prev, &tmp);
                                conf->nr_queued--;
                        }
                }
                spin_unlock_irqrestore(&conf->device_lock, flags);
                while (!list_empty(&tmp)) {
                        r10_bio = list_first_entry(&tmp, struct r10bio,
                                                   retry_list);
                        list_del(&r10_bio->retry_list);
                        if (mddev->degraded)
                                set_bit(R10BIO_Degraded, &r10_bio->state);

                        if (test_bit(R10BIO_WriteError,
                                     &r10_bio->state))
                                close_write(r10_bio);
                        raid_end_bio_io(r10_bio);
                }
        }

        blk_start_plug(&plug);
        for (;;) {

                flush_pending_writes(conf);

                spin_lock_irqsave(&conf->device_lock, flags);
                if (list_empty(head)) {
                        spin_unlock_irqrestore(&conf->device_lock, flags);
                        break;
                }
                r10_bio = list_entry(head->prev, struct r10bio, retry_list);
                list_del(head->prev);
                conf->nr_queued--;
                spin_unlock_irqrestore(&conf->device_lock, flags);

                mddev = r10_bio->mddev;
                conf = mddev->private;
                if (test_bit(R10BIO_MadeGood, &r10_bio->state) ||
                    test_bit(R10BIO_WriteError, &r10_bio->state))
                        handle_write_completed(conf, r10_bio);
                else if (test_bit(R10BIO_IsReshape, &r10_bio->state))
                        reshape_request_write(mddev, r10_bio);
                else if (test_bit(R10BIO_IsSync, &r10_bio->state))
                        sync_request_write(mddev, r10_bio);
                else if (test_bit(R10BIO_IsRecover, &r10_bio->state))
                        recovery_request_write(mddev, r10_bio);
                else if (test_bit(R10BIO_ReadError, &r10_bio->state))
                        handle_read_error(mddev, r10_bio);
                else
                        WARN_ON_ONCE(1);

                cond_resched();
                if (mddev->sb_flags & ~(1<<MD_SB_CHANGE_PENDING))
                        md_check_recovery(mddev);
        }
        blk_finish_plug(&plug);
}

static int init_resync(struct r10conf *conf)
{
        int ret, buffs, i;

        buffs = RESYNC_WINDOW / RESYNC_BLOCK_SIZE;
        BUG_ON(mempool_initialized(&conf->r10buf_pool));
        conf->have_replacement = 0;
        for (i = 0; i < conf->geo.raid_disks; i++)
                if (conf->mirrors[i].replacement)
                        conf->have_replacement = 1;
        ret = mempool_init(&conf->r10buf_pool, buffs,
                           r10buf_pool_alloc, r10buf_pool_free, conf);
        if (ret)
                return ret;
        conf->next_resync = 0;
        return 0;
}

static struct r10bio *raid10_alloc_init_r10buf(struct r10conf *conf)
{
        struct r10bio *r10bio = mempool_alloc(&conf->r10buf_pool, GFP_NOIO);
        struct rsync_pages *rp;
        struct bio *bio;
        int nalloc;
        int i;

        if (test_bit(MD_RECOVERY_SYNC, &conf->mddev->recovery) ||
            test_bit(MD_RECOVERY_RESHAPE, &conf->mddev->recovery))
                nalloc = conf->copies; /* resync */
        else
                nalloc = 2; /* recovery */

        for (i = 0; i < nalloc; i++) {
                bio = r10bio->devs[i].bio;
                rp = bio->bi_private;
                bio_reset(bio, NULL, 0);
                bio->bi_private = rp;
                bio = r10bio->devs[i].repl_bio;
                if (bio) {
                        rp = bio->bi_private;
                        bio_reset(bio, NULL, 0);
                        bio->bi_private = rp;
                }
        }
        return r10bio;
}

/*
 * Set cluster_sync_high since we need other nodes to add the
 * range [cluster_sync_low, cluster_sync_high] to suspend list.
 */
static void raid10_set_cluster_sync_high(struct r10conf *conf)
{
        sector_t window_size;
        int extra_chunk, chunks;

        /*
         * First, here we define "stripe" as a unit which across
         * all member devices one time, so we get chunks by use
         * raid_disks / near_copies. Otherwise, if near_copies is
         * close to raid_disks, then resync window could increases
         * linearly with the increase of raid_disks, which means
         * we will suspend a really large IO window while it is not
         * necessary. If raid_disks is not divisible by near_copies,
         * an extra chunk is needed to ensure the whole "stripe" is
         * covered.
         */

        chunks = conf->geo.raid_disks / conf->geo.near_copies;
        if (conf->geo.raid_disks % conf->geo.near_copies == 0)
                extra_chunk = 0;
        else
                extra_chunk = 1;
        window_size = (chunks + extra_chunk) * conf->mddev->chunk_sectors;

        /*
         * At least use a 32M window to align with raid1's resync window
         */
        window_size = (CLUSTER_RESYNC_WINDOW_SECTORS > window_size) ?
                        CLUSTER_RESYNC_WINDOW_SECTORS : window_size;

        conf->cluster_sync_high = conf->cluster_sync_low + window_size;
}

/*
 * perform a "sync" on one "block"
 *
 * We need to make sure that no normal I/O request - particularly write
 * requests - conflict with active sync requests.
 *
 * This is achieved by tracking pending requests and a 'barrier' concept
 * that can be installed to exclude normal IO requests.
 *
 * Resync and recovery are handled very differently.
 * We differentiate by looking at MD_RECOVERY_SYNC in mddev->recovery.
 *
 * For resync, we iterate over virtual addresses, read all copies,
 * and update if there are differences.  If only one copy is live,
 * skip it.
 * For recovery, we iterate over physical addresses, read a good
 * value for each non-in_sync drive, and over-write.
 *
 * So, for recovery we may have several outstanding complex requests for a
 * given address, one for each out-of-sync device.  We model this by allocating
 * a number of r10_bio structures, one for each out-of-sync device.
 * As we setup these structures, we collect all bio's together into a list
 * which we then process collectively to add pages, and then process again
 * to pass to submit_bio_noacct.
 *
 * The r10_bio structures are linked using a borrowed master_bio pointer.
 * This link is counted in ->remaining.  When the r10_bio that points to NULL
 * has its remaining count decremented to 0, the whole complex operation
 * is complete.
 *
 */

static sector_t raid10_sync_request(struct mddev *mddev, sector_t sector_nr,
                             int *skipped)
{
        struct r10conf *conf = mddev->private;
        struct r10bio *r10_bio;
        struct bio *biolist = NULL, *bio;
        sector_t max_sector, nr_sectors;
        int i;
        int max_sync;
        sector_t sync_blocks;
        sector_t sectors_skipped = 0;
        int chunks_skipped = 0;
        sector_t chunk_mask = conf->geo.chunk_mask;
        int page_idx = 0;

        if (!mempool_initialized(&conf->r10buf_pool))
                if (init_resync(conf))
                        return 0;

        /*
         * Allow skipping a full rebuild for incremental assembly
         * of a clean array, like RAID1 does.
         */
        if (mddev->bitmap == NULL &&
            mddev->recovery_cp == MaxSector &&
            mddev->reshape_position == MaxSector &&
            !test_bit(MD_RECOVERY_SYNC, &mddev->recovery) &&
            !test_bit(MD_RECOVERY_REQUESTED, &mddev->recovery) &&
            !test_bit(MD_RECOVERY_RESHAPE, &mddev->recovery) &&
            conf->fullsync == 0) {
                *skipped = 1;
                return mddev->dev_sectors - sector_nr;
        }

 skipped:
        max_sector = mddev->dev_sectors;
        if (test_bit(MD_RECOVERY_SYNC, &mddev->recovery) ||
            test_bit(MD_RECOVERY_RESHAPE, &mddev->recovery))
                max_sector = mddev->resync_max_sectors;
        if (sector_nr >= max_sector) {
                conf->cluster_sync_low = 0;
                conf->cluster_sync_high = 0;

                /* If we aborted, we need to abort the
                 * sync on the 'current' bitmap chucks (there can
                 * be several when recovering multiple devices).
                 * as we may have started syncing it but not finished.
                 * We can find the current address in
                 * mddev->curr_resync, but for recovery,
                 * we need to convert that to several
                 * virtual addresses.
                 */
                if (test_bit(MD_RECOVERY_RESHAPE, &mddev->recovery)) {
                        end_reshape(conf);
                        close_sync(conf);
                        return 0;
                }

                if (mddev->curr_resync < max_sector) { /* aborted */
                        if (test_bit(MD_RECOVERY_SYNC, &mddev->recovery))
                                md_bitmap_end_sync(mddev->bitmap, mddev->curr_resync,
                                                   &sync_blocks, 1);
                        else for (i = 0; i < conf->geo.raid_disks; i++) {
                                sector_t sect =
                                        raid10_find_virt(conf, mddev->curr_resync, i);
                                md_bitmap_end_sync(mddev->bitmap, sect,
                                                   &sync_blocks, 1);
                        }
                } else {
                        /* completed sync */
                        if ((!mddev->bitmap || conf->fullsync)
                            && conf->have_replacement
                            && test_bit(MD_RECOVERY_SYNC, &mddev->recovery)) {
                                /* Completed a full sync so the replacements
                                 * are now fully recovered.
                                 */
                                rcu_read_lock();
                                for (i = 0; i < conf->geo.raid_disks; i++) {
                                        struct md_rdev *rdev =
                                                rcu_dereference(conf->mirrors[i].replacement);
                                        if (rdev)
                                                rdev->recovery_offset = MaxSector;
                                }
                                rcu_read_unlock();
                        }
                        conf->fullsync = 0;
                }
                md_bitmap_close_sync(mddev->bitmap);
                close_sync(conf);
                *skipped = 1;
                return sectors_skipped;
        }

        if (test_bit(MD_RECOVERY_RESHAPE, &mddev->recovery))
                return reshape_request(mddev, sector_nr, skipped);

        if (chunks_skipped >= conf->geo.raid_disks) {
                /* if there has been nothing to do on any drive,
                 * then there is nothing to do at all..
                 */
                *skipped = 1;
                return (max_sector - sector_nr) + sectors_skipped;
        }

        if (max_sector > mddev->resync_max)
                max_sector = mddev->resync_max; /* Don't do IO beyond here */

        /* make sure whole request will fit in a chunk - if chunks
         * are meaningful
         */
        if (conf->geo.near_copies < conf->geo.raid_disks &&
            max_sector > (sector_nr | chunk_mask))
                max_sector = (sector_nr | chunk_mask) + 1;

        /*
         * If there is non-resync activity waiting for a turn, then let it
         * though before starting on this new sync request.
         */
        if (conf->nr_waiting)
                schedule_timeout_uninterruptible(1);

        /* Again, very different code for resync and recovery.
         * Both must result in an r10bio with a list of bios that
         * have bi_end_io, bi_sector, bi_bdev set,
         * and bi_private set to the r10bio.
         * For recovery, we may actually create several r10bios
         * with 2 bios in each, that correspond to the bios in the main one.
         * In this case, the subordinate r10bios link back through a
         * borrowed master_bio pointer, and the counter in the master
         * includes a ref from each subordinate.
         */
        /* First, we decide what to do and set ->bi_end_io
         * To end_sync_read if we want to read, and
         * end_sync_write if we will want to write.
         */

        max_sync = RESYNC_PAGES << (PAGE_SHIFT-9);
        if (!test_bit(MD_RECOVERY_SYNC, &mddev->recovery)) {
                /* recovery... the complicated one */
                int j;
                r10_bio = NULL;

                for (i = 0 ; i < conf->geo.raid_disks; i++) {
                        int still_degraded;
                        struct r10bio *rb2;
                        sector_t sect;
                        int must_sync;
                        int any_working;
                        int need_recover = 0;
                        int need_replace = 0;
                        struct raid10_info *mirror = &conf->mirrors[i];
                        struct md_rdev *mrdev, *mreplace;

                        rcu_read_lock();
                        mrdev = rcu_dereference(mirror->rdev);
                        mreplace = rcu_dereference(mirror->replacement);

                        if (mrdev != NULL &&
                            !test_bit(Faulty, &mrdev->flags) &&
                            !test_bit(In_sync, &mrdev->flags))
                                need_recover = 1;
                        if (mreplace != NULL &&
                            !test_bit(Faulty, &mreplace->flags))
                                need_replace = 1;

                        if (!need_recover && !need_replace) {
                                rcu_read_unlock();
                                continue;
                        }

                        still_degraded = 0;
                        /* want to reconstruct this device */
                        rb2 = r10_bio;
                        sect = raid10_find_virt(conf, sector_nr, i);
                        if (sect >= mddev->resync_max_sectors) {
                                /* last stripe is not complete - don't
                                 * try to recover this sector.
                                 */
                                rcu_read_unlock();
                                continue;
                        }
                        if (mreplace && test_bit(Faulty, &mreplace->flags))
                                mreplace = NULL;
                        /* Unless we are doing a full sync, or a replacement
                         * we only need to recover the block if it is set in
                         * the bitmap
                         */
                        must_sync = md_bitmap_start_sync(mddev->bitmap, sect,
                                                         &sync_blocks, 1);
                        if (sync_blocks < max_sync)
                                max_sync = sync_blocks;
                        if (!must_sync &&
                            mreplace == NULL &&
                            !conf->fullsync) {
                                /* yep, skip the sync_blocks here, but don't assume
                                 * that there will never be anything to do here
                                 */
                                chunks_skipped = -1;
                                rcu_read_unlock();
                                continue;
                        }
                        atomic_inc(&mrdev->nr_pending);
                        if (mreplace)
                                atomic_inc(&mreplace->nr_pending);
                        rcu_read_unlock();

                        r10_bio = raid10_alloc_init_r10buf(conf);
                        r10_bio->state = 0;
                        raise_barrier(conf, rb2 != NULL);
                        atomic_set(&r10_bio->remaining, 0);

                        r10_bio->master_bio = (struct bio*)rb2;
                        if (rb2)
                                atomic_inc(&rb2->remaining);
                        r10_bio->mddev = mddev;
                        set_bit(R10BIO_IsRecover, &r10_bio->state);
                        r10_bio->sector = sect;

                        raid10_find_phys(conf, r10_bio);

                        /* Need to check if the array will still be
                         * degraded
                         */
                        rcu_read_lock();
                        for (j = 0; j < conf->geo.raid_disks; j++) {
                                struct md_rdev *rdev = rcu_dereference(
                                        conf->mirrors[j].rdev);
                                if (rdev == NULL || test_bit(Faulty, &rdev->flags)) {
                                        still_degraded = 1;
                                        break;
                                }
                        }

                        must_sync = md_bitmap_start_sync(mddev->bitmap, sect,
                                                         &sync_blocks, still_degraded);

                        any_working = 0;
                        for (j=0; j<conf->copies;j++) {
                                int k;
                                int d = r10_bio->devs[j].devnum;
                                sector_t from_addr, to_addr;
                                struct md_rdev *rdev =
                                        rcu_dereference(conf->mirrors[d].rdev);
                                sector_t sector, first_bad;
                                int bad_sectors;
                                if (!rdev ||
                                    !test_bit(In_sync, &rdev->flags))
                                        continue;
                                /* This is where we read from */
                                any_working = 1;
                                sector = r10_bio->devs[j].addr;

                                if (is_badblock(rdev, sector, max_sync,
                                                &first_bad, &bad_sectors)) {
                                        if (first_bad > sector)
                                                max_sync = first_bad - sector;
                                        else {
                                                bad_sectors -= (sector
                                                                - first_bad);
                                                if (max_sync > bad_sectors)
                                                        max_sync = bad_sectors;
                                                continue;
                                        }
                                }
                                bio = r10_bio->devs[0].bio;
                                bio->bi_next = biolist;
                                biolist = bio;
                                bio->bi_end_io = end_sync_read;
                                bio_set_op_attrs(bio, REQ_OP_READ, 0);
                                if (test_bit(FailFast, &rdev->flags))
                                        bio->bi_opf |= MD_FAILFAST;
                                from_addr = r10_bio->devs[j].addr;
                                bio->bi_iter.bi_sector = from_addr +
                                        rdev->data_offset;
                                bio_set_dev(bio, rdev->bdev);
                                atomic_inc(&rdev->nr_pending);
                                /* and we write to 'i' (if not in_sync) */

                                for (k=0; k<conf->copies; k++)
                                        if (r10_bio->devs[k].devnum == i)
                                                break;
                                BUG_ON(k == conf->copies);
                                to_addr = r10_bio->devs[k].addr;
                                r10_bio->devs[0].devnum = d;
                                r10_bio->devs[0].addr = from_addr;
                                r10_bio->devs[1].devnum = i;
                                r10_bio->devs[1].addr = to_addr;

                                if (need_recover) {
                                        bio = r10_bio->devs[1].bio;
                                        bio->bi_next = biolist;
                                        biolist = bio;
                                        bio->bi_end_io = end_sync_write;
                                        bio_set_op_attrs(bio, REQ_OP_WRITE, 0);
                                        bio->bi_iter.bi_sector = to_addr
                                                + mrdev->data_offset;
                                        bio_set_dev(bio, mrdev->bdev);
                                        atomic_inc(&r10_bio->remaining);
                                } else
                                        r10_bio->devs[1].bio->bi_end_io = NULL;

                                /* and maybe write to replacement */
                                bio = r10_bio->devs[1].repl_bio;
                                if (bio)
                                        bio->bi_end_io = NULL;
                                /* Note: if need_replace, then bio
                                 * cannot be NULL as r10buf_pool_alloc will
                                 * have allocated it.
                                 */
                                if (!need_replace)
                                        break;
                                bio->bi_next = biolist;
                                biolist = bio;
                                bio->bi_end_io = end_sync_write;
                                bio_set_op_attrs(bio, REQ_OP_WRITE, 0);
                                bio->bi_iter.bi_sector = to_addr +
                                        mreplace->data_offset;
                                bio_set_dev(bio, mreplace->bdev);
                                atomic_inc(&r10_bio->remaining);
                                break;
                        }
                        rcu_read_unlock();
                        if (j == conf->copies) {
                                /* Cannot recover, so abort the recovery or
                                 * record a bad block */
                                if (any_working) {
                                        /* problem is that there are bad blocks
                                         * on other device(s)
                                         */
                                        int k;
                                        for (k = 0; k < conf->copies; k++)
                                                if (r10_bio->devs[k].devnum == i)
                                                        break;
                                        if (!test_bit(In_sync,
                                                      &mrdev->flags)
                                            && !rdev_set_badblocks(
                                                    mrdev,
                                                    r10_bio->devs[k].addr,
                                                    max_sync, 0))
                                                any_working = 0;
                                        if (mreplace &&
                                            !rdev_set_badblocks(
                                                    mreplace,
                                                    r10_bio->devs[k].addr,
                                                    max_sync, 0))
                                                any_working = 0;
                                }
                                if (!any_working)  {
                                        if (!test_and_set_bit(MD_RECOVERY_INTR,
                                                              &mddev->recovery))
                                                pr_warn("md/raid10:%s: insufficient working devices for recovery.\n",
                                                       mdname(mddev));
                                        mirror->recovery_disabled
                                                = mddev->recovery_disabled;
                                }
                                put_buf(r10_bio);
                                if (rb2)
                                        atomic_dec(&rb2->remaining);
                                r10_bio = rb2;
                                rdev_dec_pending(mrdev, mddev);
                                if (mreplace)
                                        rdev_dec_pending(mreplace, mddev);
                                break;
                        }
                        rdev_dec_pending(mrdev, mddev);
                        if (mreplace)
                                rdev_dec_pending(mreplace, mddev);
                        if (r10_bio->devs[0].bio->bi_opf & MD_FAILFAST) {
                                /* Only want this if there is elsewhere to
                                 * read from. 'j' is currently the first
                                 * readable copy.
                                 */
                                int targets = 1;
                                for (; j < conf->copies; j++) {
                                        int d = r10_bio->devs[j].devnum;
                                        if (conf->mirrors[d].rdev &&
                                            test_bit(In_sync,
                                                      &conf->mirrors[d].rdev->flags))
                                                targets++;
                                }
                                if (targets == 1)
                                        r10_bio->devs[0].bio->bi_opf
                                                &= ~MD_FAILFAST;
                        }
                }
                if (biolist == NULL) {
                        while (r10_bio) {
                                struct r10bio *rb2 = r10_bio;
                                r10_bio = (struct r10bio*) rb2->master_bio;
                                rb2->master_bio = NULL;
                                put_buf(rb2);
                        }
                        goto giveup;
                }
        } else {
                /* resync. Schedule a read for every block at this virt offset */
                int count = 0;

                /*
                 * Since curr_resync_completed could probably not update in
                 * time, and we will set cluster_sync_low based on it.
                 * Let's check against "sector_nr + 2 * RESYNC_SECTORS" for
                 * safety reason, which ensures curr_resync_completed is
                 * updated in bitmap_cond_end_sync.
                 */
                md_bitmap_cond_end_sync(mddev->bitmap, sector_nr,
                                        mddev_is_clustered(mddev) &&
                                        (sector_nr + 2 * RESYNC_SECTORS > conf->cluster_sync_high));

                if (!md_bitmap_start_sync(mddev->bitmap, sector_nr,
                                          &sync_blocks, mddev->degraded) &&
                    !conf->fullsync && !test_bit(MD_RECOVERY_REQUESTED,
                                                 &mddev->recovery)) {
                        /* We can skip this block */
                        *skipped = 1;
                        return sync_blocks + sectors_skipped;
                }
                if (sync_blocks < max_sync)
                        max_sync = sync_blocks;
                r10_bio = raid10_alloc_init_r10buf(conf);
                r10_bio->state = 0;

                r10_bio->mddev = mddev;
                atomic_set(&r10_bio->remaining, 0);
                raise_barrier(conf, 0);
                conf->next_resync = sector_nr;

                r10_bio->master_bio = NULL;
                r10_bio->sector = sector_nr;
                set_bit(R10BIO_IsSync, &r10_bio->state);
                raid10_find_phys(conf, r10_bio);
                r10_bio->sectors = (sector_nr | chunk_mask) - sector_nr + 1;

                for (i = 0; i < conf->copies; i++) {
                        int d = r10_bio->devs[i].devnum;
                        sector_t first_bad, sector;
                        int bad_sectors;
                        struct md_rdev *rdev;

                        if (r10_bio->devs[i].repl_bio)
                                r10_bio->devs[i].repl_bio->bi_end_io = NULL;

                        bio = r10_bio->devs[i].bio;
                        bio->bi_status = BLK_STS_IOERR;
                        rcu_read_lock();
                        rdev = rcu_dereference(conf->mirrors[d].rdev);
                        if (rdev == NULL || test_bit(Faulty, &rdev->flags)) {
                                rcu_read_unlock();
                                continue;
                        }
                        sector = r10_bio->devs[i].addr;
                        if (is_badblock(rdev, sector, max_sync,
                                        &first_bad, &bad_sectors)) {
                                if (first_bad > sector)
                                        max_sync = first_bad - sector;
                                else {
                                        bad_sectors -= (sector - first_bad);
                                        if (max_sync > bad_sectors)
                                                max_sync = bad_sectors;
                                        rcu_read_unlock();
                                        continue;
                                }
                        }
                        atomic_inc(&rdev->nr_pending);
                        atomic_inc(&r10_bio->remaining);
                        bio->bi_next = biolist;
                        biolist = bio;
                        bio->bi_end_io = end_sync_read;
                        bio_set_op_attrs(bio, REQ_OP_READ, 0);
                        if (test_bit(FailFast, &rdev->flags))
                                bio->bi_opf |= MD_FAILFAST;
                        bio->bi_iter.bi_sector = sector + rdev->data_offset;
                        bio_set_dev(bio, rdev->bdev);
                        count++;

                        rdev = rcu_dereference(conf->mirrors[d].replacement);
                        if (rdev == NULL || test_bit(Faulty, &rdev->flags)) {
                                rcu_read_unlock();
                                continue;
                        }
                        atomic_inc(&rdev->nr_pending);

                        /* Need to set up for writing to the replacement */
                        bio = r10_bio->devs[i].repl_bio;
                        bio->bi_status = BLK_STS_IOERR;

                        sector = r10_bio->devs[i].addr;
                        bio->bi_next = biolist;
                        biolist = bio;
                        bio->bi_end_io = end_sync_write;
                        bio_set_op_attrs(bio, REQ_OP_WRITE, 0);
                        if (test_bit(FailFast, &rdev->flags))
                                bio->bi_opf |= MD_FAILFAST;
                        bio->bi_iter.bi_sector = sector + rdev->data_offset;
                        bio_set_dev(bio, rdev->bdev);
                        count++;
                        rcu_read_unlock();
                }

                if (count < 2) {
                        for (i=0; i<conf->copies; i++) {
                                int d = r10_bio->devs[i].devnum;
                                if (r10_bio->devs[i].bio->bi_end_io)
                                        rdev_dec_pending(conf->mirrors[d].rdev,
                                                         mddev);
                                if (r10_bio->devs[i].repl_bio &&
                                    r10_bio->devs[i].repl_bio->bi_end_io)
                                        rdev_dec_pending(
                                                conf->mirrors[d].replacement,
                                                mddev);
                        }
                        put_buf(r10_bio);
                        biolist = NULL;
                        goto giveup;
                }
        }

        nr_sectors = 0;
        if (sector_nr + max_sync < max_sector)
                max_sector = sector_nr + max_sync;
        do {
                struct page *page;
                int len = PAGE_SIZE;
                if (sector_nr + (len>>9) > max_sector)
                        len = (max_sector - sector_nr) << 9;
                if (len == 0)
                        break;
                for (bio= biolist ; bio ; bio=bio->bi_next) {
                        struct resync_pages *rp = get_resync_pages(bio);
                        page = resync_fetch_page(rp, page_idx);
                        /*
                         * won't fail because the vec table is big enough
                         * to hold all these pages
                         */
                        bio_add_page(bio, page, len, 0);
                }
                nr_sectors += len>>9;
                sector_nr += len>>9;
        } while (++page_idx < RESYNC_PAGES);
        r10_bio->sectors = nr_sectors;

        if (mddev_is_clustered(mddev) &&
            test_bit(MD_RECOVERY_SYNC, &mddev->recovery)) {
                /* It is resync not recovery */
                if (conf->cluster_sync_high < sector_nr + nr_sectors) {
                        conf->cluster_sync_low = mddev->curr_resync_completed;
                        raid10_set_cluster_sync_high(conf);
                        /* Send resync message */
                        md_cluster_ops->resync_info_update(mddev,
                                                conf->cluster_sync_low,
                                                conf->cluster_sync_high);
                }
        } else if (mddev_is_clustered(mddev)) {
                /* This is recovery not resync */
                sector_t sect_va1, sect_va2;
                bool broadcast_msg = false;

                for (i = 0; i < conf->geo.raid_disks; i++) {
                        /*
                         * sector_nr is a device address for recovery, so we
                         * need translate it to array address before compare
                         * with cluster_sync_high.
                         */
                        sect_va1 = raid10_find_virt(conf, sector_nr, i);

                        if (conf->cluster_sync_high < sect_va1 + nr_sectors) {
                                broadcast_msg = true;
                                /*
                                 * curr_resync_completed is similar as
                                 * sector_nr, so make the translation too.
                                 */
                                sect_va2 = raid10_find_virt(conf,
                                        mddev->curr_resync_completed, i);

                                if (conf->cluster_sync_low == 0 ||
                                    conf->cluster_sync_low > sect_va2)
                                        conf->cluster_sync_low = sect_va2;
                        }
                }
                if (broadcast_msg) {
                        raid10_set_cluster_sync_high(conf);
                        md_cluster_ops->resync_info_update(mddev,
                                                conf->cluster_sync_low,
                                                conf->cluster_sync_high);
                }
        }

        while (biolist) {
                bio = biolist;
                biolist = biolist->bi_next;

                bio->bi_next = NULL;
                r10_bio = get_resync_r10bio(bio);
                r10_bio->sectors = nr_sectors;

                if (bio->bi_end_io == end_sync_read) {
                        md_sync_acct_bio(bio, nr_sectors);
                        bio->bi_status = 0;
                        submit_bio_noacct(bio);
                }
        }

        if (sectors_skipped)
                /* pretend they weren't skipped, it makes
                 * no important difference in this case
                 */
                md_done_sync(mddev, sectors_skipped, 1);

        return sectors_skipped + nr_sectors;
 giveup:
        /* There is nowhere to write, so all non-sync
         * drives must be failed or in resync, all drives
         * have a bad block, so try the next chunk...
         */
        if (sector_nr + max_sync < max_sector)
                max_sector = sector_nr + max_sync;

        sectors_skipped += (max_sector - sector_nr);
        chunks_skipped ++;
        sector_nr = max_sector;
        goto skipped;
}

static sector_t
raid10_size(struct mddev *mddev, sector_t sectors, int raid_disks)
{
        sector_t size;
        struct r10conf *conf = mddev->private;

        if (!raid_disks)
                raid_disks = min(conf->geo.raid_disks,
                                 conf->prev.raid_disks);
        if (!sectors)
                sectors = conf->dev_sectors;

        size = sectors >> conf->geo.chunk_shift;
        sector_div(size, conf->geo.far_copies);
        size = size * raid_disks;
        sector_div(size, conf->geo.near_copies);

        return size << conf->geo.chunk_shift;
}

static void calc_sectors(struct r10conf *conf, sector_t size)
{
        /* Calculate the number of sectors-per-device that will
         * actually be used, and set conf->dev_sectors and
         * conf->stride
         */

        size = size >> conf->geo.chunk_shift;
        sector_div(size, conf->geo.far_copies);
        size = size * conf->geo.raid_disks;
        sector_div(size, conf->geo.near_copies);
        /* 'size' is now the number of chunks in the array */
        /* calculate "used chunks per device" */
        size = size * conf->copies;

        /* We need to round up when dividing by raid_disks to
         * get the stride size.
         */
        size = DIV_ROUND_UP_SECTOR_T(size, conf->geo.raid_disks);

        conf->dev_sectors = size << conf->geo.chunk_shift;

        if (conf->geo.far_offset)
                conf->geo.stride = 1 << conf->geo.chunk_shift;
        else {
                sector_div(size, conf->geo.far_copies);
                conf->geo.stride = size << conf->geo.chunk_shift;
        }
}

enum geo_type {geo_new, geo_old, geo_start};
static int setup_geo(struct geom *geo, struct mddev *mddev, enum geo_type new)
{
        int nc, fc, fo;
        int layout, chunk, disks;
        switch (new) {
        case geo_old:
                layout = mddev->layout;
                chunk = mddev->chunk_sectors;
                disks = mddev->raid_disks - mddev->delta_disks;
                break;
        case geo_new:
                layout = mddev->new_layout;
                chunk = mddev->new_chunk_sectors;
                disks = mddev->raid_disks;
                break;
        default: /* avoid 'may be unused' warnings */
        case geo_start: /* new when starting reshape - raid_disks not
                         * updated yet. */
                layout = mddev->new_layout;
                chunk = mddev->new_chunk_sectors;
                disks = mddev->raid_disks + mddev->delta_disks;
                break;
        }
        if (layout >> 19)
                return -1;
        if (chunk < (PAGE_SIZE >> 9) ||
            !is_power_of_2(chunk))
                return -2;
        nc = layout & 255;
        fc = (layout >> 8) & 255;
        fo = layout & (1<<16);
        geo->raid_disks = disks;
        geo->near_copies = nc;
        geo->far_copies = fc;
        geo->far_offset = fo;
        switch (layout >> 17) {
        case 0: /* original layout.  simple but not always optimal */
                geo->far_set_size = disks;
                break;
        case 1: /* "improved" layout which was buggy.  Hopefully no-one is
                 * actually using this, but leave code here just in case.*/
                geo->far_set_size = disks/fc;
                WARN(geo->far_set_size < fc,
                     "This RAID10 layout does not provide data safety - please backup and create new array\n");
                break;
        case 2: /* "improved" layout fixed to match documentation */
                geo->far_set_size = fc * nc;
                break;
        default: /* Not a valid layout */
                return -1;
        }
        geo->chunk_mask = chunk - 1;
        geo->chunk_shift = ffz(~chunk);
        return nc*fc;
}

static struct r10conf *setup_conf(struct mddev *mddev)
{
        struct r10conf *conf = NULL;
        int err = -EINVAL;
        struct geom geo;
        int copies;

        copies = setup_geo(&geo, mddev, geo_new);

        if (copies == -2) {
                pr_warn("md/raid10:%s: chunk size must be at least PAGE_SIZE(%ld) and be a power of 2.\n",
                        mdname(mddev), PAGE_SIZE);
                goto out;
        }

        if (copies < 2 || copies > mddev->raid_disks) {
                pr_warn("md/raid10:%s: unsupported raid10 layout: 0x%8x\n",
                        mdname(mddev), mddev->new_layout);
                goto out;
        }

        err = -ENOMEM;
        conf = kzalloc(sizeof(struct r10conf), GFP_KERNEL);
        if (!conf)
                goto out;

        /* FIXME calc properly */
        conf->mirrors = kcalloc(mddev->raid_disks + max(0, -mddev->delta_disks),
                                sizeof(struct raid10_info),
                                GFP_KERNEL);
        if (!conf->mirrors)
                goto out;

        conf->tmppage = alloc_page(GFP_KERNEL);
        if (!conf->tmppage)
                goto out;

        conf->geo = geo;
        conf->copies = copies;
        err = mempool_init(&conf->r10bio_pool, NR_RAID_BIOS, r10bio_pool_alloc,
                           rbio_pool_free, conf);
        if (err)
                goto out;

        err = bioset_init(&conf->bio_split, BIO_POOL_SIZE, 0, 0);
        if (err)
                goto out;

        calc_sectors(conf, mddev->dev_sectors);
        if (mddev->reshape_position == MaxSector) {
                conf->prev = conf->geo;
                conf->reshape_progress = MaxSector;
        } else {
                if (setup_geo(&conf->prev, mddev, geo_old) != conf->copies) {
                        err = -EINVAL;
                        goto out;
                }
                conf->reshape_progress = mddev->reshape_position;
                if (conf->prev.far_offset)
                        conf->prev.stride = 1 << conf->prev.chunk_shift;
                else
                        /* far_copies must be 1 */
                        conf->prev.stride = conf->dev_sectors;
        }
        conf->reshape_safe = conf->reshape_progress;
        spin_lock_init(&conf->device_lock);
        INIT_LIST_HEAD(&conf->retry_list);
        INIT_LIST_HEAD(&conf->bio_end_io_list);

        spin_lock_init(&conf->resync_lock);
        init_waitqueue_head(&conf->wait_barrier);
        atomic_set(&conf->nr_pending, 0);

        err = -ENOMEM;
        conf->thread = md_register_thread(raid10d, mddev, "raid10");
        if (!conf->thread)
                goto out;

        conf->mddev = mddev;
        return conf;

 out:
        if (conf) {
                mempool_exit(&conf->r10bio_pool);
                kfree(conf->mirrors);
                safe_put_page(conf->tmppage);
                bioset_exit(&conf->bio_split);
                kfree(conf);
        }
        return ERR_PTR(err);
}

static void raid10_set_io_opt(struct r10conf *conf)
{
        int raid_disks = conf->geo.raid_disks;

        if (!(conf->geo.raid_disks % conf->geo.near_copies))
                raid_disks /= conf->geo.near_copies;
        blk_queue_io_opt(conf->mddev->queue, (conf->mddev->chunk_sectors << 9) *
                         raid_disks);
}

static int raid10_run(struct mddev *mddev)
{
        struct r10conf *conf;
        int i, disk_idx;
        struct raid10_info *disk;
        struct md_rdev *rdev;
        sector_t size;
        sector_t min_offset_diff = 0;
        int first = 1;

        if (mddev_init_writes_pending(mddev) < 0)
                return -ENOMEM;

        if (mddev->private == NULL) {
                conf = setup_conf(mddev);
                if (IS_ERR(conf))
                        return PTR_ERR(conf);
                mddev->private = conf;
        }
        conf = mddev->private;
        if (!conf)
                goto out;

        if (mddev_is_clustered(conf->mddev)) {
                int fc, fo;

                fc = (mddev->layout >> 8) & 255;
                fo = mddev->layout & (1<<16);
                if (fc > 1 || fo > 0) {
                        pr_err("only near layout is supported by clustered"
                                " raid10\n");
                        goto out_free_conf;
                }
        }

        mddev->thread = conf->thread;
        conf->thread = NULL;

        if (mddev->queue) {
                blk_queue_max_discard_sectors(mddev->queue,
                                              UINT_MAX);
                blk_queue_max_write_zeroes_sectors(mddev->queue, 0);
                blk_queue_io_min(mddev->queue, mddev->chunk_sectors << 9);
                raid10_set_io_opt(conf);
        }

        rdev_for_each(rdev, mddev) {
                long long diff;

                disk_idx = rdev->raid_disk;
                if (disk_idx < 0)
                        continue;
                if (disk_idx >= conf->geo.raid_disks &&
                    disk_idx >= conf->prev.raid_disks)
                        continue;
                disk = conf->mirrors + disk_idx;

                if (test_bit(Replacement, &rdev->flags)) {
                        if (disk->replacement)
                                goto out_free_conf;
                        disk->replacement = rdev;
                } else {
                        if (disk->rdev)
                                goto out_free_conf;
                        disk->rdev = rdev;
                }
                diff = (rdev->new_data_offset - rdev->data_offset);
                if (!mddev->reshape_backwards)
                        diff = -diff;
                if (diff < 0)
                        diff = 0;
                if (first || diff < min_offset_diff)
                        min_offset_diff = diff;

                if (mddev->gendisk)
                        disk_stack_limits(mddev->gendisk, rdev->bdev,
                                          rdev->data_offset << 9);

                disk->head_position = 0;
                first = 0;
        }

        /* need to check that every block has at least one working mirror */
        if (!enough(conf, -1)) {
                pr_err("md/raid10:%s: not enough operational mirrors.\n",
                       mdname(mddev));
                goto out_free_conf;
        }

        if (conf->reshape_progress != MaxSector) {
                /* must ensure that shape change is supported */
                if (conf->geo.far_copies != 1 &&
                    conf->geo.far_offset == 0)
                        goto out_free_conf;
                if (conf->prev.far_copies != 1 &&
                    conf->prev.far_offset == 0)
                        goto out_free_conf;
        }

        mddev->degraded = 0;
        for (i = 0;
             i < conf->geo.raid_disks
                     || i < conf->prev.raid_disks;
             i++) {

                disk = conf->mirrors + i;

                if (!disk->rdev && disk->replacement) {
                        /* The replacement is all we have - use it */
                        disk->rdev = disk->replacement;
                        disk->replacement = NULL;
                        clear_bit(Replacement, &disk->rdev->flags);
                }

                if (!disk->rdev ||
                    !test_bit(In_sync, &disk->rdev->flags)) {
                        disk->head_position = 0;
                        mddev->degraded++;
                        if (disk->rdev &&
                            disk->rdev->saved_raid_disk < 0)
                                conf->fullsync = 1;
                }

                if (disk->replacement &&
                    !test_bit(In_sync, &disk->replacement->flags) &&
                    disk->replacement->saved_raid_disk < 0) {
                        conf->fullsync = 1;
                }

                disk->recovery_disabled = mddev->recovery_disabled - 1;
        }

        if (mddev->recovery_cp != MaxSector)
                pr_notice("md/raid10:%s: not clean -- starting background reconstruction\n",
                          mdname(mddev));
        pr_info("md/raid10:%s: active with %d out of %d devices\n",
                mdname(mddev), conf->geo.raid_disks - mddev->degraded,
                conf->geo.raid_disks);
        /*
         * Ok, everything is just fine now
         */
        mddev->dev_sectors = conf->dev_sectors;
        size = raid10_size(mddev, 0, 0);
        md_set_array_sectors(mddev, size);
        mddev->resync_max_sectors = size;
        set_bit(MD_FAILFAST_SUPPORTED, &mddev->flags);

        if (md_integrity_register(mddev))
                goto out_free_conf;

        if (conf->reshape_progress != MaxSector) {
                unsigned long before_length, after_length;

                before_length = ((1 << conf->prev.chunk_shift) *
                                 conf->prev.far_copies);
                after_length = ((1 << conf->geo.chunk_shift) *
                                conf->geo.far_copies);

                if (max(before_length, after_length) > min_offset_diff) {
                        /* This cannot work */
                        pr_warn("md/raid10: offset difference not enough to continue reshape\n");
                        goto out_free_conf;
                }
                conf->offset_diff = min_offset_diff;

                clear_bit(MD_RECOVERY_SYNC, &mddev->recovery);
                clear_bit(MD_RECOVERY_CHECK, &mddev->recovery);
                set_bit(MD_RECOVERY_RESHAPE, &mddev->recovery);
                set_bit(MD_RECOVERY_RUNNING, &mddev->recovery);
                mddev->sync_thread = md_register_thread(md_do_sync, mddev,
                                                        "reshape");
                if (!mddev->sync_thread)
                        goto out_free_conf;
        }

        return 0;

out_free_conf:
        md_unregister_thread(&mddev->thread);
        mempool_exit(&conf->r10bio_pool);
        safe_put_page(conf->tmppage);
        kfree(conf->mirrors);
        kfree(conf);
        mddev->private = NULL;
out:
        return -EIO;
}

static void raid10_free(struct mddev *mddev, void *priv)
{
        struct r10conf *conf = priv;

        mempool_exit(&conf->r10bio_pool);
        safe_put_page(conf->tmppage);
        kfree(conf->mirrors);
        kfree(conf->mirrors_old);
        kfree(conf->mirrors_new);
        bioset_exit(&conf->bio_split);
        kfree(conf);
}

static void raid10_quiesce(struct mddev *mddev, int quiesce)
{
        struct r10conf *conf = mddev->private;

        if (quiesce)
                raise_barrier(conf, 0);
        else
                lower_barrier(conf);
}

static int raid10_resize(struct mddev *mddev, sector_t sectors)
{
        /* Resize of 'far' arrays is not supported.
         * For 'near' and 'offset' arrays we can set the
         * number of sectors used to be an appropriate multiple
         * of the chunk size.
         * For 'offset', this is far_copies*chunksize.
         * For 'near' the multiplier is the LCM of
         * near_copies and raid_disks.
         * So if far_copies > 1 && !far_offset, fail.
         * Else find LCM(raid_disks, near_copy)*far_copies and
         * multiply by chunk_size.  Then round to this number.
         * This is mostly done by raid10_size()
         */
        struct r10conf *conf = mddev->private;
        sector_t oldsize, size;

        if (mddev->reshape_position != MaxSector)
                return -EBUSY;

        if (conf->geo.far_copies > 1 && !conf->geo.far_offset)
                return -EINVAL;

        oldsize = raid10_size(mddev, 0, 0);
        size = raid10_size(mddev, sectors, 0);
        if (mddev->external_size &&
            mddev->array_sectors > size)
                return -EINVAL;
        if (mddev->bitmap) {
                int ret = md_bitmap_resize(mddev->bitmap, size, 0, 0);
                if (ret)
                        return ret;
        }
        md_set_array_sectors(mddev, size);
        if (sectors > mddev->dev_sectors &&
            mddev->recovery_cp > oldsize) {
                mddev->recovery_cp = oldsize;
                set_bit(MD_RECOVERY_NEEDED, &mddev->recovery);
        }
        calc_sectors(conf, sectors);
        mddev->dev_sectors = conf->dev_sectors;
        mddev->resync_max_sectors = size;
        return 0;
}

static void *raid10_takeover_raid0(struct mddev *mddev, sector_t size, int devs)
{
        struct md_rdev *rdev;
        struct r10conf *conf;

        if (mddev->degraded > 0) {
                pr_warn("md/raid10:%s: Error: degraded raid0!\n",
                        mdname(mddev));
                return ERR_PTR(-EINVAL);
        }
        sector_div(size, devs);

        /* Set new parameters */
        mddev->new_level = 10;
        /* new layout: far_copies = 1, near_copies = 2 */
        mddev->new_layout = (1<<8) + 2;
        mddev->new_chunk_sectors = mddev->chunk_sectors;
        mddev->delta_disks = mddev->raid_disks;
        mddev->raid_disks *= 2;
        /* make sure it will be not marked as dirty */
        mddev->recovery_cp = MaxSector;
        mddev->dev_sectors = size;

        conf = setup_conf(mddev);
        if (!IS_ERR(conf)) {
                rdev_for_each(rdev, mddev)
                        if (rdev->raid_disk >= 0) {
                                rdev->new_raid_disk = rdev->raid_disk * 2;
                                rdev->sectors = size;
                        }
                conf->barrier = 1;
        }

        return conf;
}

static void *raid10_takeover(struct mddev *mddev)
{
        struct r0conf *raid0_conf;

        /* raid10 can take over:
         *  raid0 - providing it has only two drives
         */
        if (mddev->level == 0) {
                /* for raid0 takeover only one zone is supported */
                raid0_conf = mddev->private;
                if (raid0_conf->nr_strip_zones > 1) {
                        pr_warn("md/raid10:%s: cannot takeover raid 0 with more than one zone.\n",
                                mdname(mddev));
                        return ERR_PTR(-EINVAL);
                }
                return raid10_takeover_raid0(mddev,
                        raid0_conf->strip_zone->zone_end,
                        raid0_conf->strip_zone->nb_dev);
        }
        return ERR_PTR(-EINVAL);
}

static int raid10_check_reshape(struct mddev *mddev)
{
        /* Called when there is a request to change
         * - layout (to ->new_layout)
         * - chunk size (to ->new_chunk_sectors)
         * - raid_disks (by delta_disks)
         * or when trying to restart a reshape that was ongoing.
         *
         * We need to validate the request and possibly allocate
         * space if that might be an issue later.
         *
         * Currently we reject any reshape of a 'far' mode array,
         * allow chunk size to change if new is generally acceptable,
         * allow raid_disks to increase, and allow
         * a switch between 'near' mode and 'offset' mode.
         */
        struct r10conf *conf = mddev->private;
        struct geom geo;

        if (conf->geo.far_copies != 1 && !conf->geo.far_offset)
                return -EINVAL;

        if (setup_geo(&geo, mddev, geo_start) != conf->copies)
                /* mustn't change number of copies */
                return -EINVAL;
        if (geo.far_copies > 1 && !geo.far_offset)
                /* Cannot switch to 'far' mode */
                return -EINVAL;

        if (mddev->array_sectors & geo.chunk_mask)
                        /* not factor of array size */
                        return -EINVAL;

        if (!enough(conf, -1))
                return -EINVAL;

        kfree(conf->mirrors_new);
        conf->mirrors_new = NULL;
        if (mddev->delta_disks > 0) {
                /* allocate new 'mirrors' list */
                conf->mirrors_new =
                        kcalloc(mddev->raid_disks + mddev->delta_disks,
                                sizeof(struct raid10_info),
                                GFP_KERNEL);
                if (!conf->mirrors_new)
                        return -ENOMEM;
        }
        return 0;
}

/*
 * Need to check if array has failed when deciding whether to:
 *  - start an array
 *  - remove non-faulty devices
 *  - add a spare
 *  - allow a reshape
 * This determination is simple when no reshape is happening.
 * However if there is a reshape, we need to carefully check
 * both the before and after sections.
 * This is because some failed devices may only affect one
 * of the two sections, and some non-in_sync devices may
 * be insync in the section most affected by failed devices.
 */
static int calc_degraded(struct r10conf *conf)
{
        int degraded, degraded2;
        int i;

        rcu_read_lock();
        degraded = 0;
        /* 'prev' section first */
        for (i = 0; i < conf->prev.raid_disks; i++) {
                struct md_rdev *rdev = rcu_dereference(conf->mirrors[i].rdev);
                if (!rdev || test_bit(Faulty, &rdev->flags))
                        degraded++;
                else if (!test_bit(In_sync, &rdev->flags))
                        /* When we can reduce the number of devices in
                         * an array, this might not contribute to
                         * 'degraded'.  It does now.
                         */
                        degraded++;
        }
        rcu_read_unlock();
        if (conf->geo.raid_disks == conf->prev.raid_disks)
                return degraded;
        rcu_read_lock();
        degraded2 = 0;
        for (i = 0; i < conf->geo.raid_disks; i++) {
                struct md_rdev *rdev = rcu_dereference(conf->mirrors[i].rdev);
                if (!rdev || test_bit(Faulty, &rdev->flags))
                        degraded2++;
                else if (!test_bit(In_sync, &rdev->flags)) {
                        /* If reshape is increasing the number of devices,
                         * this section has already been recovered, so
                         * it doesn't contribute to degraded.
                         * else it does.
                         */
                        if (conf->geo.raid_disks <= conf->prev.raid_disks)
                                degraded2++;
                }
        }
        rcu_read_unlock();
        if (degraded2 > degraded)
                return degraded2;
        return degraded;
}

static int raid10_start_reshape(struct mddev *mddev)
{
        /* A 'reshape' has been requested. This commits
         * the various 'new' fields and sets MD_RECOVER_RESHAPE
         * This also checks if there are enough spares and adds them
         * to the array.
         * We currently require enough spares to make the final
         * array non-degraded.  We also require that the difference
         * between old and new data_offset - on each device - is
         * enough that we never risk over-writing.
         */

        unsigned long before_length, after_length;
        sector_t min_offset_diff = 0;
        int first = 1;
        struct geom new;
        struct r10conf *conf = mddev->private;
        struct md_rdev *rdev;
        int spares = 0;
        int ret;

        if (test_bit(MD_RECOVERY_RUNNING, &mddev->recovery))
                return -EBUSY;

        if (setup_geo(&new, mddev, geo_start) != conf->copies)
                return -EINVAL;

        before_length = ((1 << conf->prev.chunk_shift) *
                         conf->prev.far_copies);
        after_length = ((1 << conf->geo.chunk_shift) *
                        conf->geo.far_copies);

        rdev_for_each(rdev, mddev) {
                if (!test_bit(In_sync, &rdev->flags)
                    && !test_bit(Faulty, &rdev->flags))
                        spares++;
                if (rdev->raid_disk >= 0) {
                        long long diff = (rdev->new_data_offset
                                          - rdev->data_offset);
                        if (!mddev->reshape_backwards)
                                diff = -diff;
                        if (diff < 0)
                                diff = 0;
                        if (first || diff < min_offset_diff)
                                min_offset_diff = diff;
                        first = 0;
                }
        }

        if (max(before_length, after_length) > min_offset_diff)
                return -EINVAL;

        if (spares < mddev->delta_disks)
                return -EINVAL;

        conf->offset_diff = min_offset_diff;
        spin_lock_irq(&conf->device_lock);
        if (conf->mirrors_new) {
                memcpy(conf->mirrors_new, conf->mirrors,
                       sizeof(struct raid10_info)*conf->prev.raid_disks);
                smp_mb();
                kfree(conf->mirrors_old);
                conf->mirrors_old = conf->mirrors;
                conf->mirrors = conf->mirrors_new;
                conf->mirrors_new = NULL;
        }
        setup_geo(&conf->geo, mddev, geo_start);
        smp_mb();
        if (mddev->reshape_backwards) {
                sector_t size = raid10_size(mddev, 0, 0);
                if (size < mddev->array_sectors) {
                        spin_unlock_irq(&conf->device_lock);
                        pr_warn("md/raid10:%s: array size must be reduce before number of disks\n",
                                mdname(mddev));
                        return -EINVAL;
                }
                mddev->resync_max_sectors = size;
                conf->reshape_progress = size;
        } else
                conf->reshape_progress = 0;
        conf->reshape_safe = conf->reshape_progress;
        spin_unlock_irq(&conf->device_lock);

        if (mddev->delta_disks && mddev->bitmap) {
                struct mdp_superblock_1 *sb = NULL;
                sector_t oldsize, newsize;

                oldsize = raid10_size(mddev, 0, 0);
                newsize = raid10_size(mddev, 0, conf->geo.raid_disks);

                if (!mddev_is_clustered(mddev)) {
                        ret = md_bitmap_resize(mddev->bitmap, newsize, 0, 0);
                        if (ret)
                                goto abort;
                        else
                                goto out;
                }

                rdev_for_each(rdev, mddev) {
                        if (rdev->raid_disk > -1 &&
                            !test_bit(Faulty, &rdev->flags))
                                sb = page_address(rdev->sb_page);
                }

                /*
                 * some node is already performing reshape, and no need to
                 * call md_bitmap_resize again since it should be called when
                 * receiving BITMAP_RESIZE msg
                 */
                if ((sb && (le32_to_cpu(sb->feature_map) &
                            MD_FEATURE_RESHAPE_ACTIVE)) || (oldsize == newsize))
                        goto out;

                ret = md_bitmap_resize(mddev->bitmap, newsize, 0, 0);
                if (ret)
                        goto abort;

                ret = md_cluster_ops->resize_bitmaps(mddev, newsize, oldsize);
                if (ret) {
                        md_bitmap_resize(mddev->bitmap, oldsize, 0, 0);
                        goto abort;
                }
        }
out:
        if (mddev->delta_disks > 0) {
                rdev_for_each(rdev, mddev)
                        if (rdev->raid_disk < 0 &&
                            !test_bit(Faulty, &rdev->flags)) {
                                if (raid10_add_disk(mddev, rdev) == 0) {
                                        if (rdev->raid_disk >=
                                            conf->prev.raid_disks)
                                                set_bit(In_sync, &rdev->flags);
                                        else
                                                rdev->recovery_offset = 0;

                                        /* Failure here is OK */
                                        sysfs_link_rdev(mddev, rdev);
                                }
                        } else if (rdev->raid_disk >= conf->prev.raid_disks
                                   && !test_bit(Faulty, &rdev->flags)) {
                                /* This is a spare that was manually added */
                                set_bit(In_sync, &rdev->flags);
                        }
        }
        /* When a reshape changes the number of devices,
         * ->degraded is measured against the larger of the
         * pre and  post numbers.
         */
        spin_lock_irq(&conf->device_lock);
        mddev->degraded = calc_degraded(conf);
        spin_unlock_irq(&conf->device_lock);
        mddev->raid_disks = conf->geo.raid_disks;
        mddev->reshape_position = conf->reshape_progress;
        set_bit(MD_SB_CHANGE_DEVS, &mddev->sb_flags);

        clear_bit(MD_RECOVERY_SYNC, &mddev->recovery);
        clear_bit(MD_RECOVERY_CHECK, &mddev->recovery);
        clear_bit(MD_RECOVERY_DONE, &mddev->recovery);
        set_bit(MD_RECOVERY_RESHAPE, &mddev->recovery);
        set_bit(MD_RECOVERY_RUNNING, &mddev->recovery);

        mddev->sync_thread = md_register_thread(md_do_sync, mddev,
                                                "reshape");
        if (!mddev->sync_thread) {
                ret = -EAGAIN;
                goto abort;
        }
        conf->reshape_checkpoint = jiffies;
        md_wakeup_thread(mddev->sync_thread);
        md_new_event();
        return 0;

abort:
        mddev->recovery = 0;
        spin_lock_irq(&conf->device_lock);
        conf->geo = conf->prev;
        mddev->raid_disks = conf->geo.raid_disks;
        rdev_for_each(rdev, mddev)
                rdev->new_data_offset = rdev->data_offset;
        smp_wmb();
        conf->reshape_progress = MaxSector;
        conf->reshape_safe = MaxSector;
        mddev->reshape_position = MaxSector;
        spin_unlock_irq(&conf->device_lock);
        return ret;
}

/* Calculate the last device-address that could contain
 * any block from the chunk that includes the array-address 's'
 * and report the next address.
 * i.e. the address returned will be chunk-aligned and after
 * any data that is in the chunk containing 's'.
 */
static sector_t last_dev_address(sector_t s, struct geom *geo)
{
        s = (s | geo->chunk_mask) + 1;
        s >>= geo->chunk_shift;
        s *= geo->near_copies;
        s = DIV_ROUND_UP_SECTOR_T(s, geo->raid_disks);
        s *= geo->far_copies;
        s <<= geo->chunk_shift;
        return s;
}

/* Calculate the first device-address that could contain
 * any block from the chunk that includes the array-address 's'.
 * This too will be the start of a chunk
 */
static sector_t first_dev_address(sector_t s, struct geom *geo)
{
        s >>= geo->chunk_shift;
        s *= geo->near_copies;
        sector_div(s, geo->raid_disks);
        s *= geo->far_copies;
        s <<= geo->chunk_shift;
        return s;
}

static sector_t reshape_request(struct mddev *mddev, sector_t sector_nr,
                                int *skipped)
{
        /* We simply copy at most one chunk (smallest of old and new)
         * at a time, possibly less if that exceeds RESYNC_PAGES,
         * or we hit a bad block or something.
         * This might mean we pause for normal IO in the middle of
         * a chunk, but that is not a problem as mddev->reshape_position
         * can record any location.
         *
         * If we will want to write to a location that isn't
         * yet recorded as 'safe' (i.e. in metadata on disk) then
         * we need to flush all reshape requests and update the metadata.
         *
         * When reshaping forwards (e.g. to more devices), we interpret
         * 'safe' as the earliest block which might not have been copied
         * down yet.  We divide this by previous stripe size and multiply
         * by previous stripe length to get lowest device offset that we
         * cannot write to yet.
         * We interpret 'sector_nr' as an address that we want to write to.
         * From this we use last_device_address() to find where we might
         * write to, and first_device_address on the  'safe' position.
         * If this 'next' write position is after the 'safe' position,
         * we must update the metadata to increase the 'safe' position.
         *
         * When reshaping backwards, we round in the opposite direction
         * and perform the reverse test:  next write position must not be
         * less than current safe position.
         *
         * In all this the minimum difference in data offsets
         * (conf->offset_diff - always positive) allows a bit of slack,
         * so next can be after 'safe', but not by more than offset_diff
         *
         * We need to prepare all the bios here before we start any IO
         * to ensure the size we choose is acceptable to all devices.
         * The means one for each copy for write-out and an extra one for
         * read-in.
         * We store the read-in bio in ->master_bio and the others in
         * ->devs[x].bio and ->devs[x].repl_bio.
         */
        struct r10conf *conf = mddev->private;
        struct r10bio *r10_bio;
        sector_t next, safe, last;
        int max_sectors;
        int nr_sectors;
        int s;
        struct md_rdev *rdev;
        int need_flush = 0;
        struct bio *blist;
        struct bio *bio, *read_bio;
        int sectors_done = 0;
        struct page **pages;

        if (sector_nr == 0) {
                /* If restarting in the middle, skip the initial sectors */
                if (mddev->reshape_backwards &&
                    conf->reshape_progress < raid10_size(mddev, 0, 0)) {
                        sector_nr = (raid10_size(mddev, 0, 0)
                                     - conf->reshape_progress);
                } else if (!mddev->reshape_backwards &&
                           conf->reshape_progress > 0)
                        sector_nr = conf->reshape_progress;
                if (sector_nr) {
                        mddev->curr_resync_completed = sector_nr;
                        sysfs_notify_dirent_safe(mddev->sysfs_completed);
                        *skipped = 1;
                        return sector_nr;
                }
        }

        /* We don't use sector_nr to track where we are up to
         * as that doesn't work well for ->reshape_backwards.
         * So just use ->reshape_progress.
         */
        if (mddev->reshape_backwards) {
                /* 'next' is the earliest device address that we might
                 * write to for this chunk in the new layout
                 */
                next = first_dev_address(conf->reshape_progress - 1,
                                         &conf->geo);

                /* 'safe' is the last device address that we might read from
                 * in the old layout after a restart
                 */
                safe = last_dev_address(conf->reshape_safe - 1,
                                        &conf->prev);

                if (next + conf->offset_diff < safe)
                        need_flush = 1;

                last = conf->reshape_progress - 1;
                sector_nr = last & ~(sector_t)(conf->geo.chunk_mask
                                               & conf->prev.chunk_mask);
                if (sector_nr + RESYNC_SECTORS < last)
                        sector_nr = last + 1 - RESYNC_SECTORS;
        } else {
                /* 'next' is after the last device address that we
                 * might write to for this chunk in the new layout
                 */
                next = last_dev_address(conf->reshape_progress, &conf->geo);

                /* 'safe' is the earliest device address that we might
                 * read from in the old layout after a restart
                 */
                safe = first_dev_address(conf->reshape_safe, &conf->prev);

                /* Need to update metadata if 'next' might be beyond 'safe'
                 * as that would possibly corrupt data
                 */
                if (next > safe + conf->offset_diff)
                        need_flush = 1;

                sector_nr = conf->reshape_progress;
                last  = sector_nr | (conf->geo.chunk_mask
                                     & conf->prev.chunk_mask);

                if (sector_nr + RESYNC_SECTORS <= last)
                        last = sector_nr + RESYNC_SECTORS - 1;
        }

        if (need_flush ||
            time_after(jiffies, conf->reshape_checkpoint + 10*HZ)) {
                /* Need to update reshape_position in metadata */
                wait_barrier(conf, false);
                mddev->reshape_position = conf->reshape_progress;
                if (mddev->reshape_backwards)
                        mddev->curr_resync_completed = raid10_size(mddev, 0, 0)
                                - conf->reshape_progress;
                else
                        mddev->curr_resync_completed = conf->reshape_progress;
                conf->reshape_checkpoint = jiffies;
                set_bit(MD_SB_CHANGE_DEVS, &mddev->sb_flags);
                md_wakeup_thread(mddev->thread);
                wait_event(mddev->sb_wait, mddev->sb_flags == 0 ||
                           test_bit(MD_RECOVERY_INTR, &mddev->recovery));
                if (test_bit(MD_RECOVERY_INTR, &mddev->recovery)) {
                        allow_barrier(conf);
                        return sectors_done;
                }
                conf->reshape_safe = mddev->reshape_position;
                allow_barrier(conf);
        }

        raise_barrier(conf, 0);
read_more:
        /* Now schedule reads for blocks from sector_nr to last */
        r10_bio = raid10_alloc_init_r10buf(conf);
        r10_bio->state = 0;
        raise_barrier(conf, 1);
        atomic_set(&r10_bio->remaining, 0);
        r10_bio->mddev = mddev;
        r10_bio->sector = sector_nr;
        set_bit(R10BIO_IsReshape, &r10_bio->state);
        r10_bio->sectors = last - sector_nr + 1;
        rdev = read_balance(conf, r10_bio, &max_sectors);
        BUG_ON(!test_bit(R10BIO_Previous, &r10_bio->state));

        if (!rdev) {
                /* Cannot read from here, so need to record bad blocks
                 * on all the target devices.
                 */
                // FIXME
                mempool_free(r10_bio, &conf->r10buf_pool);
                set_bit(MD_RECOVERY_INTR, &mddev->recovery);
                return sectors_done;
        }

        read_bio = bio_alloc_bioset(rdev->bdev, RESYNC_PAGES, REQ_OP_READ,
                                    GFP_KERNEL, &mddev->bio_set);
        read_bio->bi_iter.bi_sector = (r10_bio->devs[r10_bio->read_slot].addr
                               + rdev->data_offset);
        read_bio->bi_private = r10_bio;
        read_bio->bi_end_io = end_reshape_read;
        r10_bio->master_bio = read_bio;
        r10_bio->read_slot = r10_bio->devs[r10_bio->read_slot].devnum;

        /*
         * Broadcast RESYNC message to other nodes, so all nodes would not
         * write to the region to avoid conflict.
        */
        if (mddev_is_clustered(mddev) && conf->cluster_sync_high <= sector_nr) {
                struct mdp_superblock_1 *sb = NULL;
                int sb_reshape_pos = 0;

                conf->cluster_sync_low = sector_nr;
                conf->cluster_sync_high = sector_nr + CLUSTER_RESYNC_WINDOW_SECTORS;
                sb = page_address(rdev->sb_page);
                if (sb) {
                        sb_reshape_pos = le64_to_cpu(sb->reshape_position);
                        /*
                         * Set cluster_sync_low again if next address for array
                         * reshape is less than cluster_sync_low. Since we can't
                         * update cluster_sync_low until it has finished reshape.
                         */
                        if (sb_reshape_pos < conf->cluster_sync_low)
                                conf->cluster_sync_low = sb_reshape_pos;
                }

                md_cluster_ops->resync_info_update(mddev, conf->cluster_sync_low,
                                                          conf->cluster_sync_high);
        }

        /* Now find the locations in the new layout */
        __raid10_find_phys(&conf->geo, r10_bio);

        blist = read_bio;
        read_bio->bi_next = NULL;

        rcu_read_lock();
        for (s = 0; s < conf->copies*2; s++) {
                struct bio *b;
                int d = r10_bio->devs[s/2].devnum;
                struct md_rdev *rdev2;
                if (s&1) {
                        rdev2 = rcu_dereference(conf->mirrors[d].replacement);
                        b = r10_bio->devs[s/2].repl_bio;
                } else {
                        rdev2 = rcu_dereference(conf->mirrors[d].rdev);
                        b = r10_bio->devs[s/2].bio;
                }
                if (!rdev2 || test_bit(Faulty, &rdev2->flags))
                        continue;

                bio_set_dev(b, rdev2->bdev);
                b->bi_iter.bi_sector = r10_bio->devs[s/2].addr +
                        rdev2->new_data_offset;
                b->bi_end_io = end_reshape_write;
                bio_set_op_attrs(b, REQ_OP_WRITE, 0);
                b->bi_next = blist;
                blist = b;
        }

        /* Now add as many pages as possible to all of these bios. */

        nr_sectors = 0;
        pages = get_resync_pages(r10_bio->devs[0].bio)->pages;
        for (s = 0 ; s < max_sectors; s += PAGE_SIZE >> 9) {
                struct page *page = pages[s / (PAGE_SIZE >> 9)];
                int len = (max_sectors - s) << 9;
                if (len > PAGE_SIZE)
                        len = PAGE_SIZE;
                for (bio = blist; bio ; bio = bio->bi_next) {
                        /*
                         * won't fail because the vec table is big enough
                         * to hold all these pages
                         */
                        bio_add_page(bio, page, len, 0);
                }
                sector_nr += len >> 9;
                nr_sectors += len >> 9;
        }
        rcu_read_unlock();
        r10_bio->sectors = nr_sectors;

        /* Now submit the read */
        md_sync_acct_bio(read_bio, r10_bio->sectors);
        atomic_inc(&r10_bio->remaining);
        read_bio->bi_next = NULL;
        submit_bio_noacct(read_bio);
        sectors_done += nr_sectors;
        if (sector_nr <= last)
                goto read_more;

        lower_barrier(conf);

        /* Now that we have done the whole section we can
         * update reshape_progress
         */
        if (mddev->reshape_backwards)
                conf->reshape_progress -= sectors_done;
        else
                conf->reshape_progress += sectors_done;

        return sectors_done;
}

static void end_reshape_request(struct r10bio *r10_bio);
static int handle_reshape_read_error(struct mddev *mddev,
                                     struct r10bio *r10_bio);
static void reshape_request_write(struct mddev *mddev, struct r10bio *r10_bio)
{
        /* Reshape read completed.  Hopefully we have a block
         * to write out.
         * If we got a read error then we do sync 1-page reads from
         * elsewhere until we find the data - or give up.
         */
        struct r10conf *conf = mddev->private;
        int s;

        if (!test_bit(R10BIO_Uptodate, &r10_bio->state))
                if (handle_reshape_read_error(mddev, r10_bio) < 0) {
                        /* Reshape has been aborted */
                        md_done_sync(mddev, r10_bio->sectors, 0);
                        return;
                }

        /* We definitely have the data in the pages, schedule the
         * writes.
         */
        atomic_set(&r10_bio->remaining, 1);
        for (s = 0; s < conf->copies*2; s++) {
                struct bio *b;
                int d = r10_bio->devs[s/2].devnum;
                struct md_rdev *rdev;
                rcu_read_lock();
                if (s&1) {
                        rdev = rcu_dereference(conf->mirrors[d].replacement);
                        b = r10_bio->devs[s/2].repl_bio;
                } else {
                        rdev = rcu_dereference(conf->mirrors[d].rdev);
                        b = r10_bio->devs[s/2].bio;
                }
                if (!rdev || test_bit(Faulty, &rdev->flags)) {
                        rcu_read_unlock();
                        continue;
                }
                atomic_inc(&rdev->nr_pending);
                rcu_read_unlock();
                md_sync_acct_bio(b, r10_bio->sectors);
                atomic_inc(&r10_bio->remaining);
                b->bi_next = NULL;
                submit_bio_noacct(b);
        }
        end_reshape_request(r10_bio);
}

static void end_reshape(struct r10conf *conf)
{
        if (test_bit(MD_RECOVERY_INTR, &conf->mddev->recovery))
                return;

        spin_lock_irq(&conf->device_lock);
        conf->prev = conf->geo;
        md_finish_reshape(conf->mddev);
        smp_wmb();
        conf->reshape_progress = MaxSector;
        conf->reshape_safe = MaxSector;
        spin_unlock_irq(&conf->device_lock);

        if (conf->mddev->queue)
                raid10_set_io_opt(conf);
        conf->fullsync = 0;
}

static void raid10_update_reshape_pos(struct mddev *mddev)
{
        struct r10conf *conf = mddev->private;
        sector_t lo, hi;

        md_cluster_ops->resync_info_get(mddev, &lo, &hi);
        if (((mddev->reshape_position <= hi) && (mddev->reshape_position >= lo))
            || mddev->reshape_position == MaxSector)
                conf->reshape_progress = mddev->reshape_position;
        else
                WARN_ON_ONCE(1);
}

static int handle_reshape_read_error(struct mddev *mddev,
                                     struct r10bio *r10_bio)
{
        /* Use sync reads to get the blocks from somewhere else */
        int sectors = r10_bio->sectors;
        struct r10conf *conf = mddev->private;
        struct r10bio *r10b;
        int slot = 0;
        int idx = 0;
        struct page **pages;

        r10b = kmalloc(struct_size(r10b, devs, conf->copies), GFP_NOIO);
        if (!r10b) {
                set_bit(MD_RECOVERY_INTR, &mddev->recovery);
                return -ENOMEM;
        }

        /* reshape IOs share pages from .devs[0].bio */
        pages = get_resync_pages(r10_bio->devs[0].bio)->pages;

        r10b->sector = r10_bio->sector;
        __raid10_find_phys(&conf->prev, r10b);

        while (sectors) {
                int s = sectors;
                int success = 0;
                int first_slot = slot;

                if (s > (PAGE_SIZE >> 9))
                        s = PAGE_SIZE >> 9;

                rcu_read_lock();
                while (!success) {
                        int d = r10b->devs[slot].devnum;
                        struct md_rdev *rdev = rcu_dereference(conf->mirrors[d].rdev);
                        sector_t addr;
                        if (rdev == NULL ||
                            test_bit(Faulty, &rdev->flags) ||
                            !test_bit(In_sync, &rdev->flags))
                                goto failed;

                        addr = r10b->devs[slot].addr + idx * PAGE_SIZE;
                        atomic_inc(&rdev->nr_pending);
                        rcu_read_unlock();
                        success = sync_page_io(rdev,
                                               addr,
                                               s << 9,
                                               pages[idx],
                                               REQ_OP_READ, false);
                        rdev_dec_pending(rdev, mddev);
                        rcu_read_lock();
                        if (success)
                                break;
                failed:
                        slot++;
                        if (slot >= conf->copies)
                                slot = 0;
                        if (slot == first_slot)
                                break;
                }
                rcu_read_unlock();
                if (!success) {
                        /* couldn't read this block, must give up */
                        set_bit(MD_RECOVERY_INTR,
                                &mddev->recovery);
                        kfree(r10b);
                        return -EIO;
                }
                sectors -= s;
                idx++;
        }
        kfree(r10b);
        return 0;
}

static void end_reshape_write(struct bio *bio)
{
        struct r10bio *r10_bio = get_resync_r10bio(bio);
        struct mddev *mddev = r10_bio->mddev;
        struct r10conf *conf = mddev->private;
        int d;
        int slot;
        int repl;
        struct md_rdev *rdev = NULL;

        d = find_bio_disk(conf, r10_bio, bio, &slot, &repl);
        if (repl)
                rdev = conf->mirrors[d].replacement;
        if (!rdev) {
                smp_mb();
                rdev = conf->mirrors[d].rdev;
        }

        if (bio->bi_status) {
                /* FIXME should record badblock */
                md_error(mddev, rdev);
        }

        rdev_dec_pending(rdev, mddev);
        end_reshape_request(r10_bio);
}

static void end_reshape_request(struct r10bio *r10_bio)
{
        if (!atomic_dec_and_test(&r10_bio->remaining))
                return;
        md_done_sync(r10_bio->mddev, r10_bio->sectors, 1);
        bio_put(r10_bio->master_bio);
        put_buf(r10_bio);
}

static void raid10_finish_reshape(struct mddev *mddev)
{
        struct r10conf *conf = mddev->private;

        if (test_bit(MD_RECOVERY_INTR, &mddev->recovery))
                return;

        if (mddev->delta_disks > 0) {
                if (mddev->recovery_cp > mddev->resync_max_sectors) {
                        mddev->recovery_cp = mddev->resync_max_sectors;
                        set_bit(MD_RECOVERY_NEEDED, &mddev->recovery);
                }
                mddev->resync_max_sectors = mddev->array_sectors;
        } else {
                int d;
                rcu_read_lock();
                for (d = conf->geo.raid_disks ;
                     d < conf->geo.raid_disks - mddev->delta_disks;
                     d++) {
                        struct md_rdev *rdev = rcu_dereference(conf->mirrors[d].rdev);
                        if (rdev)
                                clear_bit(In_sync, &rdev->flags);
                        rdev = rcu_dereference(conf->mirrors[d].replacement);
                        if (rdev)
                                clear_bit(In_sync, &rdev->flags);
                }
                rcu_read_unlock();
        }
        mddev->layout = mddev->new_layout;
        mddev->chunk_sectors = 1 << conf->geo.chunk_shift;
        mddev->reshape_position = MaxSector;
        mddev->delta_disks = 0;
        mddev->reshape_backwards = 0;
}

static struct md_personality raid10_personality =
{
        .name           = "raid10",
        .level          = 10,
        .owner          = THIS_MODULE,
        .make_request   = raid10_make_request,
        .run            = raid10_run,
        .free           = raid10_free,
        .status         = raid10_status,
        .error_handler  = raid10_error,
        .hot_add_disk   = raid10_add_disk,
        .hot_remove_disk= raid10_remove_disk,
        .spare_active   = raid10_spare_active,
        .sync_request   = raid10_sync_request,
        .quiesce        = raid10_quiesce,
        .size           = raid10_size,
        .resize         = raid10_resize,
        .takeover       = raid10_takeover,
        .check_reshape  = raid10_check_reshape,
        .start_reshape  = raid10_start_reshape,
        .finish_reshape = raid10_finish_reshape,
        .update_reshape_pos = raid10_update_reshape_pos,
};

static int __init raid_init(void)
{
        return register_md_personality(&raid10_personality);
}

static void raid_exit(void)
{
        unregister_md_personality(&raid10_personality);
}

module_init(raid_init);
module_exit(raid_exit);
MODULE_LICENSE("GPL");
MODULE_DESCRIPTION("RAID10 (striped mirror) personality for MD");
MODULE_ALIAS("md-personality-9"); /* RAID10 */
MODULE_ALIAS("md-raid10");
MODULE_ALIAS("md-level-10");