1 // SPDX-License-Identifier: GPL-2.0-only
3 * ICS MK712 touchscreen controller driver
5 * Copyright (c) 1999-2002 Transmeta Corporation
6 * Copyright (c) 2005 Rick Koch <n1gp@hotmail.com>
7 * Copyright (c) 2005 Vojtech Pavlik <vojtech@suse.cz>
12 * This driver supports the ICS MicroClock MK712 TouchScreen controller,
13 * found in Gateway AOL Connected Touchpad computers.
15 * Documentation for ICS MK712 can be found at:
16 * https://www.idt.com/general-parts/mk712-touch-screen-controller
20 * 1999-12-18: original version, Daniel Quinlan
21 * 1999-12-19: added anti-jitter code, report pen-up events, fixed mk712_poll
22 * to use queue_empty, Nathan Laredo
23 * 1999-12-20: improved random point rejection, Nathan Laredo
24 * 2000-01-05: checked in new anti-jitter code, changed mouse protocol, fixed
25 * queue code, added module options, other fixes, Daniel Quinlan
26 * 2002-03-15: Clean up for kernel merge <alan@redhat.com>
27 * Fixed multi open race, fixed memory checks, fixed resource
28 * allocation, fixed close/powerdown bug, switched to new init
29 * 2005-01-18: Ported to 2.6 from 2.4.28, Rick Koch
30 * 2005-02-05: Rewritten for the input layer, Vojtech Pavlik
34 #include <linux/module.h>
35 #include <linux/kernel.h>
36 #include <linux/init.h>
37 #include <linux/errno.h>
38 #include <linux/delay.h>
39 #include <linux/ioport.h>
40 #include <linux/interrupt.h>
41 #include <linux/input.h>
44 MODULE_AUTHOR("Daniel Quinlan <quinlan@pathname.com>, Vojtech Pavlik <vojtech@suse.cz>");
45 MODULE_DESCRIPTION("ICS MicroClock MK712 TouchScreen driver");
46 MODULE_LICENSE("GPL");
48 static unsigned int mk712_io = 0x260; /* Also 0x200, 0x208, 0x300 */
49 module_param_hw_named(io, mk712_io, uint, ioport, 0);
50 MODULE_PARM_DESC(io, "I/O base address of MK712 touchscreen controller");
52 static unsigned int mk712_irq = 10; /* Also 12, 14, 15 */
53 module_param_hw_named(irq, mk712_irq, uint, irq, 0);
54 MODULE_PARM_DESC(irq, "IRQ of MK712 touchscreen controller");
56 /* eight 8-bit registers */
57 #define MK712_STATUS 0
60 #define MK712_CONTROL 6
64 #define MK712_STATUS_TOUCH 0x10
65 #define MK712_CONVERSION_COMPLETE 0x80
68 #define MK712_ENABLE_INT 0x01
69 #define MK712_INT_ON_CONVERSION_COMPLETE 0x02
70 #define MK712_INT_ON_CHANGE_IN_TOUCH_STATUS 0x04
71 #define MK712_ENABLE_PERIODIC_CONVERSIONS 0x10
72 #define MK712_READ_ONE_POINT 0x20
73 #define MK712_POWERUP 0x40
75 static struct input_dev *mk712_dev;
76 static DEFINE_SPINLOCK(mk712_lock);
78 static irqreturn_t mk712_interrupt(int irq, void *dev_id)
81 static int debounce = 1;
82 static unsigned short last_x;
83 static unsigned short last_y;
85 spin_lock(&mk712_lock);
87 status = inb(mk712_io + MK712_STATUS);
89 if (~status & MK712_CONVERSION_COMPLETE) {
94 if (~status & MK712_STATUS_TOUCH) {
96 input_report_key(mk712_dev, BTN_TOUCH, 0);
105 input_report_key(mk712_dev, BTN_TOUCH, 1);
106 input_report_abs(mk712_dev, ABS_X, last_x);
107 input_report_abs(mk712_dev, ABS_Y, last_y);
110 last_x = inw(mk712_io + MK712_X) & 0x0fff;
111 last_y = inw(mk712_io + MK712_Y) & 0x0fff;
112 input_sync(mk712_dev);
113 spin_unlock(&mk712_lock);
117 static int mk712_open(struct input_dev *dev)
121 spin_lock_irqsave(&mk712_lock, flags);
123 outb(0, mk712_io + MK712_CONTROL); /* Reset */
125 outb(MK712_ENABLE_INT | MK712_INT_ON_CONVERSION_COMPLETE |
126 MK712_INT_ON_CHANGE_IN_TOUCH_STATUS |
127 MK712_ENABLE_PERIODIC_CONVERSIONS |
128 MK712_POWERUP, mk712_io + MK712_CONTROL);
130 outb(10, mk712_io + MK712_RATE); /* 187 points per second */
132 spin_unlock_irqrestore(&mk712_lock, flags);
137 static void mk712_close(struct input_dev *dev)
141 spin_lock_irqsave(&mk712_lock, flags);
143 outb(0, mk712_io + MK712_CONTROL);
145 spin_unlock_irqrestore(&mk712_lock, flags);
148 static int __init mk712_init(void)
152 if (!request_region(mk712_io, 8, "mk712")) {
153 printk(KERN_WARNING "mk712: unable to get IO region\n");
157 outb(0, mk712_io + MK712_CONTROL);
159 if ((inw(mk712_io + MK712_X) & 0xf000) || /* Sanity check */
160 (inw(mk712_io + MK712_Y) & 0xf000) ||
161 (inw(mk712_io + MK712_STATUS) & 0xf333)) {
162 printk(KERN_WARNING "mk712: device not present\n");
167 mk712_dev = input_allocate_device();
169 printk(KERN_ERR "mk712: not enough memory\n");
174 mk712_dev->name = "ICS MicroClock MK712 TouchScreen";
175 mk712_dev->phys = "isa0260/input0";
176 mk712_dev->id.bustype = BUS_ISA;
177 mk712_dev->id.vendor = 0x0005;
178 mk712_dev->id.product = 0x0001;
179 mk712_dev->id.version = 0x0100;
181 mk712_dev->open = mk712_open;
182 mk712_dev->close = mk712_close;
184 mk712_dev->evbit[0] = BIT_MASK(EV_KEY) | BIT_MASK(EV_ABS);
185 mk712_dev->keybit[BIT_WORD(BTN_TOUCH)] = BIT_MASK(BTN_TOUCH);
186 input_set_abs_params(mk712_dev, ABS_X, 0, 0xfff, 88, 0);
187 input_set_abs_params(mk712_dev, ABS_Y, 0, 0xfff, 88, 0);
189 if (request_irq(mk712_irq, mk712_interrupt, 0, "mk712", mk712_dev)) {
190 printk(KERN_WARNING "mk712: unable to get IRQ\n");
195 err = input_register_device(mk712_dev);
201 fail2: free_irq(mk712_irq, mk712_dev);
202 fail1: input_free_device(mk712_dev);
203 release_region(mk712_io, 8);
207 static void __exit mk712_exit(void)
209 input_unregister_device(mk712_dev);
210 free_irq(mk712_irq, mk712_dev);
211 release_region(mk712_io, 8);
214 module_init(mk712_init);
215 module_exit(mk712_exit);