1 # SPDX-License-Identifier: GPL-2.0-only
3 # Touchscreen driver configuration
5 menuconfig INPUT_TOUCHSCREEN
8 Say Y here, and a list of supported touchscreens will be displayed.
9 This option doesn't affect the kernel.
15 config TOUCHSCREEN_88PM860X
16 tristate "Marvell 88PM860x touchscreen"
17 depends on MFD_88PM860X
19 Say Y here if you have a 88PM860x PMIC and want to enable
20 support for the built-in touchscreen.
24 To compile this driver as a module, choose M here: the
25 module will be called 88pm860x-ts.
27 config TOUCHSCREEN_ADS7846
28 tristate "ADS7846/TSC2046/AD7873 and AD(S)7843 based touchscreens"
30 depends on HWMON = n || HWMON
32 Say Y here if you have a touchscreen interface using the
33 ADS7846/TSC2046/AD7873 or ADS7843/AD7843 controller,
34 and your board-specific setup code includes that in its
37 If HWMON is selected, and the driver is told the reference voltage
38 on your board, you will also get hwmon interfaces for the voltage
39 (and on ads7846/tsc2046/ad7873, temperature) sensors of this chip.
41 If unsure, say N (but it's safe to say "Y").
43 To compile this driver as a module, choose M here: the
44 module will be called ads7846.
46 config TOUCHSCREEN_AD7877
47 tristate "AD7877 based touchscreens"
50 Say Y here if you have a touchscreen interface using the
51 AD7877 controller, and your board-specific initialization
52 code includes that in its table of SPI devices.
54 If unsure, say N (but it's safe to say "Y").
56 To compile this driver as a module, choose M here: the
57 module will be called ad7877.
59 config TOUCHSCREEN_AD7879
60 tristate "Analog Devices AD7879-1/AD7889-1 touchscreen interface"
62 Say Y here if you want to support a touchscreen interface using
63 the AD7879-1/AD7889-1 controller.
65 You should select a bus connection too.
67 To compile this driver as a module, choose M here: the
68 module will be called ad7879.
70 config TOUCHSCREEN_AD7879_I2C
71 tristate "support I2C bus connection"
72 depends on TOUCHSCREEN_AD7879 && I2C
75 Say Y here if you have AD7879-1/AD7889-1 hooked to an I2C bus.
77 To compile this driver as a module, choose M here: the
78 module will be called ad7879-i2c.
80 config TOUCHSCREEN_AD7879_SPI
81 tristate "support SPI bus connection"
82 depends on TOUCHSCREEN_AD7879 && SPI_MASTER
85 Say Y here if you have AD7879-1/AD7889-1 hooked to a SPI bus.
87 If unsure, say N (but it's safe to say "Y").
89 To compile this driver as a module, choose M here: the
90 module will be called ad7879-spi.
92 config TOUCHSCREEN_ADC
93 tristate "Generic ADC based resistive touchscreen"
98 Say Y here if you want to use the generic ADC
99 resistive touchscreen driver.
101 If unsure, say N (but it's safe to say "Y").
103 To compile this driver as a module, choose M here: the
104 module will be called resistive-adc-touch.ko.
106 config TOUCHSCREEN_AR1021_I2C
107 tristate "Microchip AR1020/1021 i2c touchscreen"
110 Say Y here if you have the Microchip AR1020 or AR1021 touchscreen
111 controller chip in your system.
115 To compile this driver as a module, choose M here: the
116 module will be called ar1021_i2c.
118 config TOUCHSCREEN_ATMEL_MXT
119 tristate "Atmel mXT I2C Touchscreen"
123 Say Y here if you have Atmel mXT series I2C touchscreen,
124 such as AT42QT602240/ATMXT224, connected to your system.
128 To compile this driver as a module, choose M here: the
129 module will be called atmel_mxt_ts.
131 config TOUCHSCREEN_ATMEL_MXT_T37
132 bool "Support T37 Diagnostic Data"
133 depends on TOUCHSCREEN_ATMEL_MXT
134 depends on VIDEO_DEV=y || (TOUCHSCREEN_ATMEL_MXT=m && VIDEO_DEV=m)
135 select VIDEOBUF2_VMALLOC
137 Say Y here if you want support to output data from the T37
138 Diagnostic Data object using a V4L device.
140 config TOUCHSCREEN_AUO_PIXCIR
141 tristate "AUO in-cell touchscreen using Pixcir ICs"
143 depends on GPIOLIB || COMPILE_TEST
145 Say Y here if you have a AUO display with in-cell touchscreen
150 To compile this driver as a module, choose M here: the
151 module will be called auo-pixcir-ts.
153 config TOUCHSCREEN_BU21013
154 tristate "BU21013 based touch panel controllers"
157 Say Y here if you have a bu21013 touchscreen connected to
162 To compile this driver as a module, choose M here: the
163 module will be called bu21013_ts.
165 config TOUCHSCREEN_BU21029
166 tristate "Rohm BU21029 based touch panel controllers"
169 Say Y here if you have a Rohm BU21029 touchscreen controller
170 connected to your system.
174 To compile this driver as a module, choose M here: the
175 module will be called bu21029_ts.
177 config TOUCHSCREEN_CHIPONE_ICN8318
178 tristate "chipone icn8318 touchscreen controller"
179 depends on GPIOLIB || COMPILE_TEST
183 Say Y here if you have a ChipOne icn8318 based I2C touchscreen.
187 To compile this driver as a module, choose M here: the
188 module will be called chipone_icn8318.
190 config TOUCHSCREEN_CHIPONE_ICN8505
191 tristate "chipone icn8505 touchscreen controller"
192 depends on I2C && ACPI
194 Say Y here if you have a ChipOne icn8505 based I2C touchscreen.
198 To compile this driver as a module, choose M here: the
199 module will be called chipone_icn8505.
201 config TOUCHSCREEN_CY8CTMA140
202 tristate "cy8ctma140 touchscreen"
205 Say Y here if you have a Cypress CY8CTMA140 capacitive
206 touchscreen also just known as "TMA140"
210 To compile this driver as a module, choose M here: the
211 module will be called cy8ctma140.
213 config TOUCHSCREEN_CY8CTMG110
214 tristate "cy8ctmg110 touchscreen"
216 depends on GPIOLIB || COMPILE_TEST
218 Say Y here if you have a cy8ctmg110 capacitive touchscreen on
223 To compile this driver as a module, choose M here: the
224 module will be called cy8ctmg110_ts.
226 config TOUCHSCREEN_CYTTSP_CORE
227 tristate "Cypress TTSP touchscreen"
229 Say Y here if you have a touchscreen using controller from
230 the Cypress TrueTouch(tm) Standard Product family connected
231 to your system. You will also need to select appropriate
232 bus connection below.
236 To compile this driver as a module, choose M here: the
237 module will be called cyttsp_core.
239 config TOUCHSCREEN_CYTTSP_I2C
240 tristate "support I2C bus connection"
241 depends on TOUCHSCREEN_CYTTSP_CORE && I2C
243 Say Y here if the touchscreen is connected via I2C bus.
245 To compile this driver as a module, choose M here: the
246 module will be called cyttsp_i2c.
248 config TOUCHSCREEN_CYTTSP_SPI
249 tristate "support SPI bus connection"
250 depends on TOUCHSCREEN_CYTTSP_CORE && SPI_MASTER
252 Say Y here if the touchscreen is connected via SPI bus.
254 To compile this driver as a module, choose M here: the
255 module will be called cyttsp_spi.
257 config TOUCHSCREEN_CYTTSP4_CORE
258 tristate "Cypress TrueTouch Gen4 Touchscreen Driver"
260 Core driver for Cypress TrueTouch(tm) Standard Product
261 Generation4 touchscreen controllers.
263 Say Y here if you have a Cypress Gen4 touchscreen.
267 To compile this driver as a module, choose M here.
269 config TOUCHSCREEN_CYTTSP4_I2C
270 tristate "support I2C bus connection"
271 depends on TOUCHSCREEN_CYTTSP4_CORE && I2C
273 Say Y here if the touchscreen is connected via I2C bus.
275 To compile this driver as a module, choose M here: the
276 module will be called cyttsp4_i2c.
278 config TOUCHSCREEN_CYTTSP4_SPI
279 tristate "support SPI bus connection"
280 depends on TOUCHSCREEN_CYTTSP4_CORE && SPI_MASTER
282 Say Y here if the touchscreen is connected via SPI bus.
284 To compile this driver as a module, choose M here: the
285 module will be called cyttsp4_spi.
287 config TOUCHSCREEN_CYTTSP5
288 tristate "Cypress TrueTouch Gen5 Touchscreen Driver"
293 Driver for Parade TrueTouch Standard Product Generation 5
294 touchscreen controllers. I2C bus interface support only.
296 Say Y here if you have a Cypress Gen5 touchscreen.
300 To compile this driver as a module, choose M here: the
301 module will be called cyttsp5.
303 config TOUCHSCREEN_DA9034
304 tristate "Touchscreen support for Dialog Semiconductor DA9034"
305 depends on PMIC_DA903X
308 Say Y here to enable the support for the touchscreen found
309 on Dialog Semiconductor DA9034 PMIC.
313 To compile this driver as a module, choose M here: the
314 module will be called da9034-ts.
316 config TOUCHSCREEN_DA9052
317 tristate "Dialog DA9052/DA9053 TSI"
318 depends on PMIC_DA9052
320 Say Y here to support the touchscreen found on Dialog Semiconductor
321 DA9052-BC and DA9053-AA/Bx PMICs.
325 To compile this driver as a module, choose M here: the
326 module will be called da9052_tsi.
328 config TOUCHSCREEN_DYNAPRO
329 tristate "Dynapro serial touchscreen"
332 Say Y here if you have a Dynapro serial touchscreen connected to
337 To compile this driver as a module, choose M here: the
338 module will be called dynapro.
340 config TOUCHSCREEN_HAMPSHIRE
341 tristate "Hampshire serial touchscreen"
344 Say Y here if you have a Hampshire serial touchscreen connected to
349 To compile this driver as a module, choose M here: the
350 module will be called hampshire.
352 config TOUCHSCREEN_EETI
353 tristate "EETI touchscreen panel support"
356 Say Y here to enable support for I2C connected EETI touch panels.
358 To compile this driver as a module, choose M here: the
359 module will be called eeti_ts.
361 config TOUCHSCREEN_EGALAX
362 tristate "EETI eGalax multi-touch panel support"
365 Say Y here to enable support for I2C connected EETI
366 eGalax multi-touch panels.
368 To compile this driver as a module, choose M here: the
369 module will be called egalax_ts.
371 config TOUCHSCREEN_EGALAX_SERIAL
372 tristate "EETI eGalax serial touchscreen"
375 Say Y here to enable support for serial connected EETI
378 To compile this driver as a module, choose M here: the
379 module will be called egalax_ts_serial.
381 config TOUCHSCREEN_EXC3000
382 tristate "EETI EXC3000 multi-touch panel support"
385 Say Y here to enable support for I2C connected EETI
386 EXC3000 multi-touch panels.
388 To compile this driver as a module, choose M here: the
389 module will be called exc3000.
391 config TOUCHSCREEN_FUJITSU
392 tristate "Fujitsu serial touchscreen"
395 Say Y here if you have the Fujitsu touchscreen (such as one
396 installed in Lifebook P series laptop) connected to your
401 To compile this driver as a module, choose M here: the
402 module will be called fujitsu-ts.
404 config TOUCHSCREEN_GOODIX
405 tristate "Goodix I2C touchscreen"
407 depends on GPIOLIB || COMPILE_TEST
409 Say Y here if you have the Goodix touchscreen (such as one
410 installed in Onda v975w tablets) connected to your
411 system. It also supports 5-finger chip models, which can be
412 found on ARM tablets, like Wexler TAB7200 and MSI Primo73.
416 To compile this driver as a module, choose M here: the
417 module will be called goodix.
419 config TOUCHSCREEN_HIDEEP
420 tristate "HiDeep Touch IC"
423 Say Y here if you have a touchscreen using HiDeep.
427 To compile this driver as a module, choose M here : the
428 module will be called hideep_ts.
430 config TOUCHSCREEN_HYCON_HY46XX
431 tristate "Hycon hy46xx touchscreen support"
434 Say Y here if you have a touchscreen using Hycon hy46xx
438 To compile this driver as a module, choose M here: the
439 module will be called hycon-hy46xx.
441 config TOUCHSCREEN_HYNITRON_CSTXXX
442 tristate "Hynitron touchscreen support"
445 Say Y here if you have a touchscreen using a Hynitron
446 touchscreen controller.
450 To compile this driver as a module, choose M here: the
451 module will be called hynitron-cstxxx.
453 config TOUCHSCREEN_ILI210X
454 tristate "Ilitek ILI210X based touchscreen"
458 Say Y here if you have a ILI210X based touchscreen
459 controller. This driver supports models ILI2102,
460 ILI2102s, ILI2103, ILI2103s and ILI2105.
461 Such kind of chipsets can be found in Amazon Kindle Fire
466 To compile this driver as a module, choose M here: the
467 module will be called ili210x.
469 config TOUCHSCREEN_ILITEK
470 tristate "Ilitek I2C 213X/23XX/25XX/Lego Series Touch ICs"
473 Say Y here if you have touchscreen with ILITEK touch IC,
474 it supports 213X/23XX/25XX and other Lego series.
478 To compile this driver as a module, choose M here: the
479 module will be called ilitek_ts_i2c.
481 config TOUCHSCREEN_IPROC
482 tristate "IPROC touch panel driver support"
483 depends on ARCH_BCM_IPROC || COMPILE_TEST
485 Say Y here if you want to add support for the IPROC touch
486 controller to your system.
490 To compile this driver as a module, choose M here: the
491 module will be called bcm_iproc_tsc.
493 config TOUCHSCREEN_S6SY761
494 tristate "Samsung S6SY761 Touchscreen driver"
497 Say Y if you have the Samsung S6SY761 driver
501 To compile this driver as module, choose M here: the
502 module will be called s6sy761.
504 config TOUCHSCREEN_GUNZE
505 tristate "Gunze AHL-51S touchscreen"
508 Say Y here if you have the Gunze AHL-51 touchscreen connected to
513 To compile this driver as a module, choose M here: the
514 module will be called gunze.
516 config TOUCHSCREEN_EKTF2127
517 tristate "Elan eKTF2127 I2C touchscreen"
520 Say Y here if you have an Elan eKTF2127 touchscreen
521 connected to your system.
525 To compile this driver as a module, choose M here: the
526 module will be called ektf2127.
528 config TOUCHSCREEN_ELAN
529 tristate "Elan eKTH I2C touchscreen"
532 Say Y here if you have an Elan eKTH I2C touchscreen
533 connected to your system.
537 To compile this driver as a module, choose M here: the
538 module will be called elants_i2c.
540 config TOUCHSCREEN_ELO
541 tristate "Elo serial touchscreens"
544 Say Y here if you have an Elo serial touchscreen connected to
549 To compile this driver as a module, choose M here: the
550 module will be called elo.
552 config TOUCHSCREEN_WACOM_W8001
553 tristate "Wacom W8001 penabled serial touchscreen"
556 Say Y here if you have an Wacom W8001 penabled serial touchscreen
557 connected to your system.
561 To compile this driver as a module, choose M here: the
562 module will be called wacom_w8001.
564 config TOUCHSCREEN_WACOM_I2C
565 tristate "Wacom Tablet support (I2C)"
568 Say Y here if you want to use the I2C version of the Wacom
573 To compile this driver as a module, choose M here: the module
574 will be called wacom_i2c.
576 config TOUCHSCREEN_LPC32XX
577 tristate "LPC32XX touchscreen controller"
578 depends on ARCH_LPC32XX
580 Say Y here if you have a LPC32XX device and want
581 to support the built-in touchscreen.
583 To compile this driver as a module, choose M here: the
584 module will be called lpc32xx_ts.
586 config TOUCHSCREEN_MAX11801
587 tristate "MAX11801 based touchscreens"
590 Say Y here if you have a MAX11801 based touchscreen
595 To compile this driver as a module, choose M here: the
596 module will be called max11801_ts.
598 config TOUCHSCREEN_MCS5000
599 tristate "MELFAS MCS-5000 touchscreen"
602 Say Y here if you have the MELFAS MCS-5000 touchscreen controller
607 To compile this driver as a module, choose M here: the
608 module will be called mcs5000_ts.
610 config TOUCHSCREEN_MMS114
611 tristate "MELFAS MMS114 touchscreen"
614 Say Y here if you have the MELFAS MMS114 touchscreen controller
619 To compile this driver as a module, choose M here: the
620 module will be called mms114.
622 config TOUCHSCREEN_MELFAS_MIP4
623 tristate "MELFAS MIP4 Touchscreen"
626 Say Y here if you have a MELFAS MIP4 Touchscreen device.
630 To compile this driver as a module, choose M here:
631 the module will be called melfas_mip4.
633 config TOUCHSCREEN_MSG2638
634 tristate "MStar msg2638 touchscreen support"
636 depends on GPIOLIB || COMPILE_TEST
638 Say Y here if you have an I2C touchscreen using MStar msg2638.
642 To compile this driver as a module, choose M here: the
643 module will be called msg2638.
645 config TOUCHSCREEN_MTOUCH
646 tristate "MicroTouch serial touchscreens"
649 Say Y here if you have a MicroTouch (3M) serial touchscreen connected to
654 To compile this driver as a module, choose M here: the
655 module will be called mtouch.
657 config TOUCHSCREEN_IMAGIS
658 tristate "Imagis touchscreen support"
661 Say Y here if you have an Imagis IST30xxC touchscreen.
664 To compile this driver as a module, choose M here: the
665 module will be called imagis.
667 config TOUCHSCREEN_IMX6UL_TSC
668 tristate "Freescale i.MX6UL touchscreen controller"
669 depends on ((OF && GPIOLIB) || COMPILE_TEST) && HAS_IOMEM
671 Say Y here if you have a Freescale i.MX6UL, and want to
672 use the internal touchscreen controller.
676 To compile this driver as a module, choose M here: the
677 module will be called imx6ul_tsc.
679 config TOUCHSCREEN_INEXIO
680 tristate "iNexio serial touchscreens"
683 Say Y here if you have an iNexio serial touchscreen connected to
688 To compile this driver as a module, choose M here: the
689 module will be called inexio.
691 config TOUCHSCREEN_MK712
692 tristate "ICS MicroClock MK712 touchscreen"
694 Say Y here if you have the ICS MicroClock MK712 touchscreen
695 controller chip in your system.
699 To compile this driver as a module, choose M here: the
700 module will be called mk712.
702 config TOUCHSCREEN_HP600
703 tristate "HP Jornada 6xx touchscreen"
704 depends on SH_HP6XX && SH_ADC
706 Say Y here if you have a HP Jornada 620/660/680/690 and want to
707 support the built-in touchscreen.
709 To compile this driver as a module, choose M here: the
710 module will be called hp680_ts_input.
712 config TOUCHSCREEN_HP7XX
713 tristate "HP Jornada 7xx touchscreen"
714 depends on SA1100_JORNADA720_SSP
716 Say Y here if you have a HP Jornada 710/720/728 and want
717 to support the built-in touchscreen.
719 To compile this driver as a module, choose M here: the
720 module will be called jornada720_ts.
722 config TOUCHSCREEN_IPAQ_MICRO
723 tristate "HP iPAQ Atmel Micro ASIC touchscreen"
724 depends on MFD_IPAQ_MICRO
726 Say Y here to enable support for the touchscreen attached to
727 the Atmel Micro peripheral controller on iPAQ h3100/h3600/h3700
731 To compile this driver as a module, choose M here: the
732 module will be called ipaq-micro-ts.
734 config TOUCHSCREEN_HTCPEN
735 tristate "HTC Shift X9500 touchscreen"
738 Say Y here if you have an HTC Shift UMPC also known as HTC X9500
739 Clio / Shangrila and want to support the built-in touchscreen.
743 To compile this driver as a module, choose M here: the
744 module will be called htcpen.
746 config TOUCHSCREEN_PENMOUNT
747 tristate "Penmount serial touchscreen"
750 Say Y here if you have a Penmount serial touchscreen connected to
755 To compile this driver as a module, choose M here: the
756 module will be called penmount.
758 config TOUCHSCREEN_EDT_FT5X06
759 tristate "EDT FocalTech FT5x06 I2C Touchscreen support"
762 Say Y here if you have an EDT "Polytouch" touchscreen based
763 on the FocalTech FT5x06 family of controllers connected to
768 To compile this driver as a module, choose M here: the
769 module will be called edt-ft5x06.
771 config TOUCHSCREEN_RASPBERRYPI_FW
772 tristate "Raspberry Pi's firmware base touch screen support"
773 depends on RASPBERRYPI_FIRMWARE || (RASPBERRYPI_FIRMWARE=n && COMPILE_TEST)
775 Say Y here if you have the official Raspberry Pi 7 inch screen on
780 To compile this driver as a module, choose M here: the
781 module will be called raspberrypi-ts.
783 config TOUCHSCREEN_MIGOR
784 tristate "Renesas MIGO-R touchscreen"
785 depends on (SH_MIGOR || COMPILE_TEST) && I2C
787 Say Y here to enable MIGO-R touchscreen support.
791 To compile this driver as a module, choose M here: the
792 module will be called migor_ts.
794 config TOUCHSCREEN_TOUCHRIGHT
795 tristate "Touchright serial touchscreen"
798 Say Y here if you have a Touchright serial touchscreen connected to
803 To compile this driver as a module, choose M here: the
804 module will be called touchright.
806 config TOUCHSCREEN_TOUCHWIN
807 tristate "Touchwin serial touchscreen"
810 Say Y here if you have a Touchwin serial touchscreen connected to
815 To compile this driver as a module, choose M here: the
816 module will be called touchwin.
818 config TOUCHSCREEN_TI_AM335X_TSC
819 tristate "TI Touchscreen Interface"
820 depends on MFD_TI_AM335X_TSCADC
822 Say Y here if you have 4/5/8 wire touchscreen controller
823 to be connected to the ADC controller on your TI AM335x SoC.
827 To compile this driver as a module, choose M here: the
828 module will be called ti_am335x_tsc.
830 config TOUCHSCREEN_PIXCIR
831 tristate "PIXCIR I2C touchscreens"
834 Say Y here if you have a pixcir i2c touchscreen
839 To compile this driver as a module, choose M here: the
840 module will be called pixcir_i2c_ts.
842 config TOUCHSCREEN_WDT87XX_I2C
843 tristate "Weida HiTech I2C touchscreen"
846 Say Y here if you have a Weida WDT87XX I2C touchscreen
847 connected to your system.
851 To compile this driver as a module, choose M here: the
852 module will be called wdt87xx_i2c.
854 config TOUCHSCREEN_WM831X
855 tristate "Support for WM831x touchscreen controllers"
856 depends on MFD_WM831X
858 This enables support for the touchscreen controller on the WM831x
861 To compile this driver as a module, choose M here: the
862 module will be called wm831x-ts.
864 config TOUCHSCREEN_WM97XX
865 tristate "Support for WM97xx AC97 touchscreen controllers"
866 depends on AC97_BUS || AC97_BUS_NEW
868 Say Y here if you have a Wolfson Microelectronics WM97xx
869 touchscreen connected to your system. Note that this option
870 only enables core driver, you will also need to select
871 support for appropriate chip below.
875 To compile this driver as a module, choose M here: the
876 module will be called wm97xx-ts.
878 config TOUCHSCREEN_WM9705
879 bool "WM9705 Touchscreen interface support"
880 depends on TOUCHSCREEN_WM97XX
883 Say Y here to enable support for the Wolfson Microelectronics
884 WM9705 touchscreen controller.
886 config TOUCHSCREEN_WM9712
887 bool "WM9712 Touchscreen interface support"
888 depends on TOUCHSCREEN_WM97XX
891 Say Y here to enable support for the Wolfson Microelectronics
892 WM9712 touchscreen controller.
894 config TOUCHSCREEN_WM9713
895 bool "WM9713 Touchscreen interface support"
896 depends on TOUCHSCREEN_WM97XX
899 Say Y here to enable support for the Wolfson Microelectronics
900 WM9713 touchscreen controller.
902 config TOUCHSCREEN_WM97XX_MAINSTONE
903 tristate "WM97xx Mainstone/Palm accelerated touch"
904 depends on TOUCHSCREEN_WM97XX && ARCH_PXA
905 depends on SND_PXA2XX_LIB_AC97
907 Say Y here for support for streaming mode with WM97xx touchscreens
908 on Mainstone, Palm Tungsten T5, TX and LifeDrive systems.
912 To compile this driver as a module, choose M here: the
913 module will be called mainstone-wm97xx.
915 config TOUCHSCREEN_USB_COMPOSITE
916 tristate "USB Touchscreen Driver"
917 depends on USB_ARCH_HAS_HCD
920 USB Touchscreen driver for:
921 - eGalax Touchkit USB (also includes eTurboTouch CT-410/510/700)
922 - PanJit TouchSet USB
923 - 3M MicroTouch USB (EX II series)
925 - some other eTurboTouch
928 - IRTOUCHSYSTEMS/UNITOP
930 - GoTop Super_Q2/GogoPen/PenPower tablets
931 - JASTEC USB Touch Controller/DigiTech DTR-02U
932 - Zytronic controllers
933 - Elo TouchSystems 2700 IntelliTouch
934 - EasyTouch USB Touch Controller from Data Module
935 - e2i (Mimo monitors)
937 Have a look at <http://linux.chapter7.ch/touchkit/> for
938 a usage description and the required user-space stuff.
940 To compile this driver as a module, choose M here: the
941 module will be called usbtouchscreen.
943 config TOUCHSCREEN_MXS_LRADC
944 tristate "Freescale i.MX23/i.MX28 LRADC touchscreen"
945 depends on MFD_MXS_LRADC
947 Say Y here if you have a touchscreen connected to the low-resolution
948 analog-to-digital converter (LRADC) on an i.MX23 or i.MX28 processor.
950 To compile this driver as a module, choose M here: the module will be
953 config TOUCHSCREEN_MX25
954 tristate "Freescale i.MX25 touchscreen input driver"
955 depends on MFD_MX25_TSADC
957 Enable support for touchscreen connected to your i.MX25.
959 To compile this driver as a module, choose M here: the
960 module will be called fsl-imx25-tcq.
962 config TOUCHSCREEN_MC13783
963 tristate "Freescale MC13783 touchscreen input driver"
964 depends on MFD_MC13XXX
966 Say Y here if you have an Freescale MC13783 PMIC on your
967 board and want to use its touchscreen
971 To compile this driver as a module, choose M here: the
972 module will be called mc13783_ts.
974 config TOUCHSCREEN_USB_EGALAX
976 bool "eGalax, eTurboTouch CT-410/510/700 device support" if EXPERT
977 depends on TOUCHSCREEN_USB_COMPOSITE
979 config TOUCHSCREEN_USB_PANJIT
981 bool "PanJit device support" if EXPERT
982 depends on TOUCHSCREEN_USB_COMPOSITE
984 config TOUCHSCREEN_USB_3M
986 bool "3M/Microtouch EX II series device support" if EXPERT
987 depends on TOUCHSCREEN_USB_COMPOSITE
989 config TOUCHSCREEN_USB_ITM
991 bool "ITM device support" if EXPERT
992 depends on TOUCHSCREEN_USB_COMPOSITE
994 config TOUCHSCREEN_USB_ETURBO
996 bool "eTurboTouch (non-eGalax compatible) device support" if EXPERT
997 depends on TOUCHSCREEN_USB_COMPOSITE
999 config TOUCHSCREEN_USB_GUNZE
1001 bool "Gunze AHL61 device support" if EXPERT
1002 depends on TOUCHSCREEN_USB_COMPOSITE
1004 config TOUCHSCREEN_USB_DMC_TSC10
1006 bool "DMC TSC-10/25 device support" if EXPERT
1007 depends on TOUCHSCREEN_USB_COMPOSITE
1009 config TOUCHSCREEN_USB_IRTOUCH
1011 bool "IRTOUCHSYSTEMS/UNITOP device support" if EXPERT
1012 depends on TOUCHSCREEN_USB_COMPOSITE
1014 config TOUCHSCREEN_USB_IDEALTEK
1016 bool "IdealTEK URTC1000 device support" if EXPERT
1017 depends on TOUCHSCREEN_USB_COMPOSITE
1019 config TOUCHSCREEN_USB_GENERAL_TOUCH
1021 bool "GeneralTouch Touchscreen device support" if EXPERT
1022 depends on TOUCHSCREEN_USB_COMPOSITE
1024 config TOUCHSCREEN_USB_GOTOP
1026 bool "GoTop Super_Q2/GogoPen/PenPower tablet device support" if EXPERT
1027 depends on TOUCHSCREEN_USB_COMPOSITE
1029 config TOUCHSCREEN_USB_JASTEC
1031 bool "JASTEC/DigiTech DTR-02U USB touch controller device support" if EXPERT
1032 depends on TOUCHSCREEN_USB_COMPOSITE
1034 config TOUCHSCREEN_USB_ELO
1036 bool "Elo TouchSystems 2700 IntelliTouch controller device support" if EXPERT
1037 depends on TOUCHSCREEN_USB_COMPOSITE
1039 config TOUCHSCREEN_USB_E2I
1041 bool "e2i Touchscreen controller (e.g. from Mimo 740)" if EXPERT
1042 depends on TOUCHSCREEN_USB_COMPOSITE
1044 config TOUCHSCREEN_USB_ZYTRONIC
1046 bool "Zytronic controller" if EXPERT
1047 depends on TOUCHSCREEN_USB_COMPOSITE
1049 config TOUCHSCREEN_USB_ETT_TC45USB
1051 bool "ET&T USB series TC4UM/TC5UH touchscreen controller support" if EXPERT
1052 depends on TOUCHSCREEN_USB_COMPOSITE
1054 config TOUCHSCREEN_USB_NEXIO
1056 bool "NEXIO/iNexio device support" if EXPERT
1057 depends on TOUCHSCREEN_USB_COMPOSITE
1059 config TOUCHSCREEN_USB_EASYTOUCH
1061 bool "EasyTouch USB Touch controller device support" if EXPERT
1062 depends on TOUCHSCREEN_USB_COMPOSITE
1064 Say Y here if you have an EasyTouch USB Touch controller.
1067 config TOUCHSCREEN_TOUCHIT213
1068 tristate "Sahara TouchIT-213 touchscreen"
1071 Say Y here if you have a Sahara TouchIT-213 Tablet PC.
1075 To compile this driver as a module, choose M here: the
1076 module will be called touchit213.
1078 config TOUCHSCREEN_TS4800
1079 tristate "TS-4800 touchscreen"
1080 depends on HAS_IOMEM && OF
1081 depends on SOC_IMX51 || COMPILE_TEST
1084 Say Y here if you have a touchscreen on a TS-4800 board.
1086 On TS-4800, the touchscreen is not handled directly by Linux but by
1091 To compile this driver as a module, choose M here: the
1092 module will be called ts4800_ts.
1094 config TOUCHSCREEN_TSC_SERIO
1095 tristate "TSC-10/25/40 serial touchscreen support"
1098 Say Y here if you have a TSC-10, 25 or 40 serial touchscreen connected
1103 To compile this driver as a module, choose M here: the
1104 module will be called tsc40.
1106 config TOUCHSCREEN_TSC200X_CORE
1109 config TOUCHSCREEN_TSC2004
1110 tristate "TSC2004 based touchscreens"
1113 select TOUCHSCREEN_TSC200X_CORE
1115 Say Y here if you have a TSC2004 based touchscreen.
1119 To compile this driver as a module, choose M here: the
1120 module will be called tsc2004.
1122 config TOUCHSCREEN_TSC2005
1123 tristate "TSC2005 based touchscreens"
1124 depends on SPI_MASTER
1126 select TOUCHSCREEN_TSC200X_CORE
1128 Say Y here if you have a TSC2005 based touchscreen.
1132 To compile this driver as a module, choose M here: the
1133 module will be called tsc2005.
1135 config TOUCHSCREEN_TSC2007
1136 tristate "TSC2007 based touchscreens"
1139 Say Y here if you have a TSC2007 based touchscreen.
1143 To compile this driver as a module, choose M here: the
1144 module will be called tsc2007.
1146 config TOUCHSCREEN_TSC2007_IIO
1147 bool "IIO interface for external ADC input and temperature"
1148 depends on TOUCHSCREEN_TSC2007
1149 depends on IIO=y || IIO=TOUCHSCREEN_TSC2007
1151 Saying Y here adds an iio interface to the tsc2007 which
1152 provides values for the AUX input (used for e.g. battery
1153 or ambient light monitoring), temperature and raw input
1156 config TOUCHSCREEN_PCAP
1157 tristate "Motorola PCAP touchscreen"
1160 Say Y here if you have a Motorola EZX telephone and
1161 want to enable support for the built-in touchscreen.
1163 To compile this driver as a module, choose M here: the
1164 module will be called pcap_ts.
1166 config TOUCHSCREEN_RM_TS
1167 tristate "Raydium I2C Touchscreen"
1169 depends on GPIOLIB || COMPILE_TEST
1171 Say Y here if you have Raydium series I2C touchscreen,
1172 such as RM32380, connected to your system.
1176 To compile this driver as a module, choose M here: the
1177 module will be called raydium_i2c_ts.
1179 config TOUCHSCREEN_SILEAD
1180 tristate "Silead I2C touchscreen"
1183 Say Y here if you have the Silead touchscreen connected to
1188 To compile this driver as a module, choose M here: the
1189 module will be called silead.
1191 config TOUCHSCREEN_SIS_I2C
1192 tristate "SiS 9200 family I2C touchscreen"
1195 depends on GPIOLIB || COMPILE_TEST
1197 This enables support for SiS 9200 family over I2C based touchscreens.
1201 To compile this driver as a module, choose M here: the
1202 module will be called sis_i2c.
1204 config TOUCHSCREEN_ST1232
1205 tristate "Sitronix ST1232 or ST1633 touchscreen controllers"
1208 Say Y here if you want to support the Sitronix ST1232
1209 or ST1633 touchscreen controller.
1213 To compile this driver as a module, choose M here: the
1214 module will be called st1232_ts.
1216 config TOUCHSCREEN_STMFTS
1217 tristate "STMicroelectronics STMFTS touchscreen"
1219 depends on LEDS_CLASS
1221 Say Y here if you want support for STMicroelectronics
1224 To compile this driver as a module, choose M here: the
1225 module will be called stmfts.
1227 config TOUCHSCREEN_STMPE
1228 tristate "STMicroelectronics STMPE touchscreens"
1229 depends on MFD_STMPE
1232 Say Y here if you want support for STMicroelectronics
1233 STMPE touchscreen controllers.
1235 To compile this driver as a module, choose M here: the
1236 module will be called stmpe-ts.
1238 config TOUCHSCREEN_SUN4I
1239 tristate "Allwinner sun4i resistive touchscreen controller support"
1240 depends on ARCH_SUNXI || COMPILE_TEST
1242 depends on THERMAL || !THERMAL_OF
1244 This selects support for the resistive touchscreen controller
1245 found on Allwinner sunxi SoCs.
1247 To compile this driver as a module, choose M here: the
1248 module will be called sun4i-ts.
1250 config TOUCHSCREEN_SUR40
1251 tristate "Samsung SUR40 (Surface 2.0/PixelSense) touchscreen"
1252 depends on USB && MEDIA_USB_SUPPORT && HAS_DMA
1253 depends on VIDEO_DEV
1254 select VIDEOBUF2_DMA_SG
1256 Say Y here if you want support for the Samsung SUR40 touchscreen
1257 (also known as Microsoft Surface 2.0 or Microsoft PixelSense).
1259 To compile this driver as a module, choose M here: the
1260 module will be called sur40.
1262 config TOUCHSCREEN_SURFACE3_SPI
1263 tristate "Ntrig/Microsoft Surface 3 SPI touchscreen"
1265 depends on GPIOLIB || COMPILE_TEST
1267 Say Y here if you have the Ntrig/Microsoft SPI touchscreen
1268 controller chip as found on the Surface 3 in your system.
1272 To compile this driver as a module, choose M here: the
1273 module will be called surface3_spi.
1275 config TOUCHSCREEN_SX8654
1276 tristate "Semtech SX8654 touchscreen"
1279 Say Y here if you have a Semtech SX8654 touchscreen controller.
1283 To compile this driver as a module, choose M here: the
1284 module will be called sx8654.
1286 config TOUCHSCREEN_TPS6507X
1287 tristate "TPS6507x based touchscreens"
1290 Say Y here if you have a TPS6507x based touchscreen
1295 To compile this driver as a module, choose M here: the
1296 module will be called tps6507x_ts.
1298 config TOUCHSCREEN_ZET6223
1299 tristate "Zeitec ZET6223 touchscreen driver"
1302 Say Y here if you have a touchscreen using Zeitec ZET6223
1306 To compile this driver as a module, choose M here: the
1307 module will be called zet6223.
1309 config TOUCHSCREEN_ZFORCE
1310 tristate "Neonode zForce infrared touchscreens"
1312 depends on GPIOLIB || COMPILE_TEST
1314 Say Y here if you have a touchscreen using the zforce
1315 infraread technology from Neonode.
1319 To compile this driver as a module, choose M here: the
1320 module will be called zforce_ts.
1322 config TOUCHSCREEN_COLIBRI_VF50
1323 tristate "Toradex Colibri on board touchscreen driver"
1325 depends on GPIOLIB || COMPILE_TEST
1327 Say Y here if you have a Colibri VF50 and plan to use
1328 the on-board provided 4-wire touchscreen driver.
1332 To compile this driver as a module, choose M here: the
1333 module will be called colibri_vf50_ts.
1335 config TOUCHSCREEN_ROHM_BU21023
1336 tristate "ROHM BU21023/24 Dual touch support resistive touchscreens"
1339 Say Y here if you have a touchscreen using ROHM BU21023/24.
1343 To compile this driver as a module, choose M here: the
1344 module will be called bu21023_ts.
1346 config TOUCHSCREEN_IQS5XX
1347 tristate "Azoteq IQS550/572/525 trackpad/touchscreen controller"
1350 Say Y to enable support for the Azoteq IQS550/572/525
1351 family of trackpad/touchscreen controllers.
1353 To compile this driver as a module, choose M here: the
1354 module will be called iqs5xx.
1356 config TOUCHSCREEN_ZINITIX
1357 tristate "Zinitix touchscreen support"
1360 Say Y here if you have a touchscreen using Zinitix bt541,
1361 or something similar enough.
1365 To compile this driver as a module, choose M here: the
1366 module will be called zinitix.
1368 config TOUCHSCREEN_HIMAX_HX83112B
1369 tristate "Himax hx83112b touchscreen driver"
1373 Say Y here to enable support for Himax hx83112b touchscreens.
1377 To compile this driver as a module, choose M here: the
1378 module will be called himax_hx83112b.