drivers/input/misc/cm109.c

   1 // SPDX-License-Identifier: GPL-2.0-only
   2 /*
   3  * Driver for the VoIP USB phones with CM109 chipsets.
   4  *
   5  * Copyright (C) 2007 - 2008 Alfred E. Heggestad <aeh@db.org>
   6  */
   7
   8 /*
   9  *   Tested devices:
  10  *      - Komunikate KIP1000
  11  *      - Genius G-talk
  12  *      - Allied-Telesis Corega USBPH01
  13  *      - ...
  14  *
  15  * This driver is based on the yealink.c driver
  16  *
  17  * Thanks to:
  18  *   - Authors of yealink.c
  19  *   - Thomas Reitmayr
  20  *   - Oliver Neukum for good review comments and code
  21  *   - Shaun Jackman <sjackman@gmail.com> for Genius G-talk keymap
  22  *   - Dmitry Torokhov for valuable input and review
  23  *
  24  * Todo:
  25  *   - Read/write EEPROM
  26  */
  27
  28 #include <linux/kernel.h>
  29 #include <linux/init.h>
  30 #include <linux/slab.h>
  31 #include <linux/module.h>
  32 #include <linux/moduleparam.h>
  33 #include <linux/rwsem.h>
  34 #include <linux/usb/input.h>
  35
  36 #define DRIVER_VERSION "20080805"
  37 #define DRIVER_AUTHOR  "Alfred E. Heggestad"
  38 #define DRIVER_DESC    "CM109 phone driver"
  39
  40 static char *phone = "kip1000";
  41 module_param(phone, charp, S_IRUSR);
  42 MODULE_PARM_DESC(phone, "Phone name {kip1000, gtalk, usbph01, atcom}");
  43
  44 enum {
  45         /* HID Registers */
  46         HID_IR0 = 0x00, /* Record/Playback-mute button, Volume up/down  */
  47         HID_IR1 = 0x01, /* GPI, generic registers or EEPROM_DATA0       */
  48         HID_IR2 = 0x02, /* Generic registers or EEPROM_DATA1            */
  49         HID_IR3 = 0x03, /* Generic registers or EEPROM_CTRL             */
  50         HID_OR0 = 0x00, /* Mapping control, buzzer, SPDIF (offset 0x04) */
  51         HID_OR1 = 0x01, /* GPO - General Purpose Output                 */
  52         HID_OR2 = 0x02, /* Set GPIO to input/output mode                */
  53         HID_OR3 = 0x03, /* SPDIF status channel or EEPROM_CTRL          */
  54
  55         /* HID_IR0 */
  56         RECORD_MUTE   = 1 << 3,
  57         PLAYBACK_MUTE = 1 << 2,
  58         VOLUME_DOWN   = 1 << 1,
  59         VOLUME_UP     = 1 << 0,
  60
  61         /* HID_OR0 */
  62         /* bits 7-6
  63            0: HID_OR1-2 are used for GPO; HID_OR0, 3 are used for buzzer
  64               and SPDIF
  65            1: HID_OR0-3 are used as generic HID registers
  66            2: Values written to HID_OR0-3 are also mapped to MCU_CTRL,
  67               EEPROM_DATA0-1, EEPROM_CTRL (see Note)
  68            3: Reserved
  69          */
  70         HID_OR_GPO_BUZ_SPDIF   = 0 << 6,
  71         HID_OR_GENERIC_HID_REG = 1 << 6,
  72         HID_OR_MAP_MCU_EEPROM  = 2 << 6,
  73
  74         BUZZER_ON = 1 << 5,
  75
  76         /* up to 256 normal keys, up to 15 special key combinations */
  77         KEYMAP_SIZE = 256 + 15,
  78 };
  79
  80 /* CM109 protocol packet */
  81 struct cm109_ctl_packet {
  82         u8 byte[4];
  83 } __attribute__ ((packed));
  84
  85 enum { USB_PKT_LEN = sizeof(struct cm109_ctl_packet) };
  86
  87 /* CM109 device structure */
  88 struct cm109_dev {
  89         struct input_dev *idev;  /* input device */
  90         struct usb_device *udev; /* usb device */
  91         struct usb_interface *intf;
  92
  93         /* irq input channel */
  94         struct cm109_ctl_packet *irq_data;
  95         dma_addr_t irq_dma;
  96         struct urb *urb_irq;
  97
  98         /* control output channel */
  99         struct cm109_ctl_packet *ctl_data;
 100         dma_addr_t ctl_dma;
 101         struct usb_ctrlrequest *ctl_req;
 102         struct urb *urb_ctl;
 103         /*
 104          * The 3 bitfields below are protected by ctl_submit_lock.
 105          * They have to be separate since they are accessed from IRQ
 106          * context.
 107          */
 108         unsigned irq_urb_pending:1;     /* irq_urb is in flight */
 109         unsigned ctl_urb_pending:1;     /* ctl_urb is in flight */
 110         unsigned buzzer_pending:1;      /* need to issue buzz command */
 111         spinlock_t ctl_submit_lock;
 112
 113         unsigned char buzzer_state;     /* on/off */
 114
 115         /* flags */
 116         unsigned open:1;
 117         unsigned resetting:1;
 118         unsigned shutdown:1;
 119
 120         /* This mutex protects writes to the above flags */
 121         struct mutex pm_mutex;
 122
 123         unsigned short keymap[KEYMAP_SIZE];
 124
 125         char phys[64];          /* physical device path */
 126         int key_code;           /* last reported key */
 127         int keybit;             /* 0=new scan  1,2,4,8=scan columns  */
 128         u8 gpi;                 /* Cached value of GPI (high nibble) */
 129 };
 130
 131 /******************************************************************************
 132  * CM109 key interface
 133  *****************************************************************************/
 134
 135 static unsigned short special_keymap(int code)
 136 {
 137         if (code > 0xff) {
 138                 switch (code - 0xff) {
 139                 case RECORD_MUTE:       return KEY_MICMUTE;
 140                 case PLAYBACK_MUTE:     return KEY_MUTE;
 141                 case VOLUME_DOWN:       return KEY_VOLUMEDOWN;
 142                 case VOLUME_UP:         return KEY_VOLUMEUP;
 143                 }
 144         }
 145         return KEY_RESERVED;
 146 }
 147
 148 /* Map device buttons to internal key events.
 149  *
 150  * The "up" and "down" keys, are symbolised by arrows on the button.
 151  * The "pickup" and "hangup" keys are symbolised by a green and red phone
 152  * on the button.
 153
 154  Komunikate KIP1000 Keyboard Matrix
 155
 156      -> -- 1 -- 2 -- 3  --> GPI pin 4 (0x10)
 157       |    |    |    |
 158      <- -- 4 -- 5 -- 6  --> GPI pin 5 (0x20)
 159       |    |    |    |
 160      END - 7 -- 8 -- 9  --> GPI pin 6 (0x40)
 161       |    |    |    |
 162      OK -- * -- 0 -- #  --> GPI pin 7 (0x80)
 163       |    |    |    |
 164
 165      /|\  /|\  /|\  /|\
 166       |    |    |    |
 167 GPO
 168 pin:  3    2    1    0
 169      0x8  0x4  0x2  0x1
 170
 171  */
 172 static unsigned short keymap_kip1000(int scancode)
 173 {
 174         switch (scancode) {                             /* phone key:   */
 175         case 0x82: return KEY_NUMERIC_0;                /*   0          */
 176         case 0x14: return KEY_NUMERIC_1;                /*   1          */
 177         case 0x12: return KEY_NUMERIC_2;                /*   2          */
 178         case 0x11: return KEY_NUMERIC_3;                /*   3          */
 179         case 0x24: return KEY_NUMERIC_4;                /*   4          */
 180         case 0x22: return KEY_NUMERIC_5;                /*   5          */
 181         case 0x21: return KEY_NUMERIC_6;                /*   6          */
 182         case 0x44: return KEY_NUMERIC_7;                /*   7          */
 183         case 0x42: return KEY_NUMERIC_8;                /*   8          */
 184         case 0x41: return KEY_NUMERIC_9;                /*   9          */
 185         case 0x81: return KEY_NUMERIC_POUND;            /*   #          */
 186         case 0x84: return KEY_NUMERIC_STAR;             /*   *          */
 187         case 0x88: return KEY_ENTER;                    /*   pickup     */
 188         case 0x48: return KEY_ESC;                      /*   hangup     */
 189         case 0x28: return KEY_LEFT;                     /*   IN         */
 190         case 0x18: return KEY_RIGHT;                    /*   OUT        */
 191         default:   return special_keymap(scancode);
 192         }
 193 }
 194
 195 /*
 196   Contributed by Shaun Jackman <sjackman@gmail.com>
 197
 198   Genius G-Talk keyboard matrix
 199      0 1 2 3
 200   4: 0 4 8 Talk
 201   5: 1 5 9 End
 202   6: 2 6 # Up
 203   7: 3 7 * Down
 204 */
 205 static unsigned short keymap_gtalk(int scancode)
 206 {
 207         switch (scancode) {
 208         case 0x11: return KEY_NUMERIC_0;
 209         case 0x21: return KEY_NUMERIC_1;
 210         case 0x41: return KEY_NUMERIC_2;
 211         case 0x81: return KEY_NUMERIC_3;
 212         case 0x12: return KEY_NUMERIC_4;
 213         case 0x22: return KEY_NUMERIC_5;
 214         case 0x42: return KEY_NUMERIC_6;
 215         case 0x82: return KEY_NUMERIC_7;
 216         case 0x14: return KEY_NUMERIC_8;
 217         case 0x24: return KEY_NUMERIC_9;
 218         case 0x44: return KEY_NUMERIC_POUND;    /* # */
 219         case 0x84: return KEY_NUMERIC_STAR;     /* * */
 220         case 0x18: return KEY_ENTER;            /* Talk (green handset) */
 221         case 0x28: return KEY_ESC;              /* End (red handset) */
 222         case 0x48: return KEY_UP;               /* Menu up (rocker switch) */
 223         case 0x88: return KEY_DOWN;             /* Menu down (rocker switch) */
 224         default:   return special_keymap(scancode);
 225         }
 226 }
 227
 228 /*
 229  * Keymap for Allied-Telesis Corega USBPH01
 230  * http://www.alliedtelesis-corega.com/2/1344/1437/1360/chprd.html
 231  *
 232  * Contributed by july@nat.bg
 233  */
 234 static unsigned short keymap_usbph01(int scancode)
 235 {
 236         switch (scancode) {
 237         case 0x11: return KEY_NUMERIC_0;                /*   0          */
 238         case 0x21: return KEY_NUMERIC_1;                /*   1          */
 239         case 0x41: return KEY_NUMERIC_2;                /*   2          */
 240         case 0x81: return KEY_NUMERIC_3;                /*   3          */
 241         case 0x12: return KEY_NUMERIC_4;                /*   4          */
 242         case 0x22: return KEY_NUMERIC_5;                /*   5          */
 243         case 0x42: return KEY_NUMERIC_6;                /*   6          */
 244         case 0x82: return KEY_NUMERIC_7;                /*   7          */
 245         case 0x14: return KEY_NUMERIC_8;                /*   8          */
 246         case 0x24: return KEY_NUMERIC_9;                /*   9          */
 247         case 0x44: return KEY_NUMERIC_POUND;            /*   #          */
 248         case 0x84: return KEY_NUMERIC_STAR;             /*   *          */
 249         case 0x18: return KEY_ENTER;                    /*   pickup     */
 250         case 0x28: return KEY_ESC;                      /*   hangup     */
 251         case 0x48: return KEY_LEFT;                     /*   IN         */
 252         case 0x88: return KEY_RIGHT;                    /*   OUT        */
 253         default:   return special_keymap(scancode);
 254         }
 255 }
 256
 257 /*
 258  * Keymap for ATCom AU-100
 259  * http://www.atcom.cn/products.html
 260  * http://www.packetizer.com/products/au100/
 261  * http://www.voip-info.org/wiki/view/AU-100
 262  *
 263  * Contributed by daniel@gimpelevich.san-francisco.ca.us
 264  */
 265 static unsigned short keymap_atcom(int scancode)
 266 {
 267         switch (scancode) {                             /* phone key:   */
 268         case 0x82: return KEY_NUMERIC_0;                /*   0          */
 269         case 0x11: return KEY_NUMERIC_1;                /*   1          */
 270         case 0x12: return KEY_NUMERIC_2;                /*   2          */
 271         case 0x14: return KEY_NUMERIC_3;                /*   3          */
 272         case 0x21: return KEY_NUMERIC_4;                /*   4          */
 273         case 0x22: return KEY_NUMERIC_5;                /*   5          */
 274         case 0x24: return KEY_NUMERIC_6;                /*   6          */
 275         case 0x41: return KEY_NUMERIC_7;                /*   7          */
 276         case 0x42: return KEY_NUMERIC_8;                /*   8          */
 277         case 0x44: return KEY_NUMERIC_9;                /*   9          */
 278         case 0x84: return KEY_NUMERIC_POUND;            /*   #          */
 279         case 0x81: return KEY_NUMERIC_STAR;             /*   *          */
 280         case 0x18: return KEY_ENTER;                    /*   pickup     */
 281         case 0x28: return KEY_ESC;                      /*   hangup     */
 282         case 0x48: return KEY_LEFT;                     /* left arrow   */
 283         case 0x88: return KEY_RIGHT;                    /* right arrow  */
 284         default:   return special_keymap(scancode);
 285         }
 286 }
 287
 288 static unsigned short (*keymap)(int) = keymap_kip1000;
 289
 290 /*
 291  * Completes a request by converting the data into events for the
 292  * input subsystem.
 293  */
 294 static void report_key(struct cm109_dev *dev, int key)
 295 {
 296         struct input_dev *idev = dev->idev;
 297
 298         if (dev->key_code >= 0) {
 299                 /* old key up */
 300                 input_report_key(idev, dev->key_code, 0);
 301         }
 302
 303         dev->key_code = key;
 304         if (key >= 0) {
 305                 /* new valid key */
 306                 input_report_key(idev, key, 1);
 307         }
 308
 309         input_sync(idev);
 310 }
 311
 312 /*
 313  * Converts data of special key presses (volume, mute) into events
 314  * for the input subsystem, sends press-n-release for mute keys.
 315  */
 316 static void cm109_report_special(struct cm109_dev *dev)
 317 {
 318         static const u8 autorelease = RECORD_MUTE | PLAYBACK_MUTE;
 319         struct input_dev *idev = dev->idev;
 320         u8 data = dev->irq_data->byte[HID_IR0];
 321         unsigned short keycode;
 322         int i;
 323
 324         for (i = 0; i < 4; i++) {
 325                 keycode = dev->keymap[0xff + BIT(i)];
 326                 if (keycode == KEY_RESERVED)
 327                         continue;
 328
 329                 input_report_key(idev, keycode, data & BIT(i));
 330                 if (data & autorelease & BIT(i)) {
 331                         input_sync(idev);
 332                         input_report_key(idev, keycode, 0);
 333                 }
 334         }
 335         input_sync(idev);
 336 }
 337
 338 /******************************************************************************
 339  * CM109 usb communication interface
 340  *****************************************************************************/
 341
 342 static void cm109_submit_buzz_toggle(struct cm109_dev *dev)
 343 {
 344         int error;
 345
 346         if (dev->buzzer_state)
 347                 dev->ctl_data->byte[HID_OR0] |= BUZZER_ON;
 348         else
 349                 dev->ctl_data->byte[HID_OR0] &= ~BUZZER_ON;
 350
 351         error = usb_submit_urb(dev->urb_ctl, GFP_ATOMIC);
 352         if (error)
 353                 dev_err(&dev->intf->dev,
 354                         "%s: usb_submit_urb (urb_ctl) failed %d\n",
 355                         __func__, error);
 356 }
 357
 358 /*
 359  * IRQ handler
 360  */
 361 static void cm109_urb_irq_callback(struct urb *urb)
 362 {
 363         struct cm109_dev *dev = urb->context;
 364         const int status = urb->status;
 365         int error;
 366         unsigned long flags;
 367
 368         dev_dbg(&dev->intf->dev, "### URB IRQ: [0x%02x 0x%02x 0x%02x 0x%02x] keybit=0x%02x\n",
 369              dev->irq_data->byte[0],
 370              dev->irq_data->byte[1],
 371              dev->irq_data->byte[2],
 372              dev->irq_data->byte[3],
 373              dev->keybit);
 374
 375         if (status) {
 376                 if (status == -ESHUTDOWN)
 377                         return;
 378                 dev_err_ratelimited(&dev->intf->dev, "%s: urb status %d\n",
 379                                     __func__, status);
 380                 goto out;
 381         }
 382
 383         /* Special keys */
 384         cm109_report_special(dev);
 385
 386         /* Scan key column */
 387         if (dev->keybit == 0xf) {
 388
 389                 /* Any changes ? */
 390                 if ((dev->gpi & 0xf0) == (dev->irq_data->byte[HID_IR1] & 0xf0))
 391                         goto out;
 392
 393                 dev->gpi = dev->irq_data->byte[HID_IR1] & 0xf0;
 394                 dev->keybit = 0x1;
 395         } else {
 396                 report_key(dev, dev->keymap[dev->irq_data->byte[HID_IR1]]);
 397
 398                 dev->keybit <<= 1;
 399                 if (dev->keybit > 0x8)
 400                         dev->keybit = 0xf;
 401         }
 402
 403  out:
 404
 405         spin_lock_irqsave(&dev->ctl_submit_lock, flags);
 406
 407         dev->irq_urb_pending = 0;
 408
 409         if (likely(!dev->shutdown)) {
 410
 411                 if (dev->buzzer_state)
 412                         dev->ctl_data->byte[HID_OR0] |= BUZZER_ON;
 413                 else
 414                         dev->ctl_data->byte[HID_OR0] &= ~BUZZER_ON;
 415
 416                 dev->ctl_data->byte[HID_OR1] = dev->keybit;
 417                 dev->ctl_data->byte[HID_OR2] = dev->keybit;
 418
 419                 dev->buzzer_pending = 0;
 420                 dev->ctl_urb_pending = 1;
 421
 422                 error = usb_submit_urb(dev->urb_ctl, GFP_ATOMIC);
 423                 if (error)
 424                         dev_err(&dev->intf->dev,
 425                                 "%s: usb_submit_urb (urb_ctl) failed %d\n",
 426                                 __func__, error);
 427         }
 428
 429         spin_unlock_irqrestore(&dev->ctl_submit_lock, flags);
 430 }
 431
 432 static void cm109_urb_ctl_callback(struct urb *urb)
 433 {
 434         struct cm109_dev *dev = urb->context;
 435         const int status = urb->status;
 436         int error;
 437         unsigned long flags;
 438
 439         dev_dbg(&dev->intf->dev, "### URB CTL: [0x%02x 0x%02x 0x%02x 0x%02x]\n",
 440              dev->ctl_data->byte[0],
 441              dev->ctl_data->byte[1],
 442              dev->ctl_data->byte[2],
 443              dev->ctl_data->byte[3]);
 444
 445         if (status) {
 446                 if (status == -ESHUTDOWN)
 447                         return;
 448                 dev_err_ratelimited(&dev->intf->dev, "%s: urb status %d\n",
 449                                     __func__, status);
 450         }
 451
 452         spin_lock_irqsave(&dev->ctl_submit_lock, flags);
 453
 454         dev->ctl_urb_pending = 0;
 455
 456         if (likely(!dev->shutdown)) {
 457
 458                 if (dev->buzzer_pending || status) {
 459                         dev->buzzer_pending = 0;
 460                         dev->ctl_urb_pending = 1;
 461                         cm109_submit_buzz_toggle(dev);
 462                 } else if (likely(!dev->irq_urb_pending)) {
 463                         /* ask for key data */
 464                         dev->irq_urb_pending = 1;
 465                         error = usb_submit_urb(dev->urb_irq, GFP_ATOMIC);
 466                         if (error)
 467                                 dev_err(&dev->intf->dev,
 468                                         "%s: usb_submit_urb (urb_irq) failed %d\n",
 469                                         __func__, error);
 470                 }
 471         }
 472
 473         spin_unlock_irqrestore(&dev->ctl_submit_lock, flags);
 474 }
 475
 476 static void cm109_toggle_buzzer_async(struct cm109_dev *dev)
 477 {
 478         unsigned long flags;
 479
 480         spin_lock_irqsave(&dev->ctl_submit_lock, flags);
 481
 482         if (dev->ctl_urb_pending) {
 483                 /* URB completion will resubmit */
 484                 dev->buzzer_pending = 1;
 485         } else {
 486                 dev->ctl_urb_pending = 1;
 487                 cm109_submit_buzz_toggle(dev);
 488         }
 489
 490         spin_unlock_irqrestore(&dev->ctl_submit_lock, flags);
 491 }
 492
 493 static void cm109_toggle_buzzer_sync(struct cm109_dev *dev, int on)
 494 {
 495         int error;
 496
 497         if (on)
 498                 dev->ctl_data->byte[HID_OR0] |= BUZZER_ON;
 499         else
 500                 dev->ctl_data->byte[HID_OR0] &= ~BUZZER_ON;
 501
 502         error = usb_control_msg(dev->udev,
 503                                 usb_sndctrlpipe(dev->udev, 0),
 504                                 dev->ctl_req->bRequest,
 505                                 dev->ctl_req->bRequestType,
 506                                 le16_to_cpu(dev->ctl_req->wValue),
 507                                 le16_to_cpu(dev->ctl_req->wIndex),
 508                                 dev->ctl_data,
 509                                 USB_PKT_LEN, USB_CTRL_SET_TIMEOUT);
 510         if (error < 0 && error != -EINTR)
 511                 dev_err(&dev->intf->dev, "%s: usb_control_msg() failed %d\n",
 512                         __func__, error);
 513 }
 514
 515 static void cm109_stop_traffic(struct cm109_dev *dev)
 516 {
 517         dev->shutdown = 1;
 518         /*
 519          * Make sure other CPUs see this
 520          */
 521         smp_wmb();
 522
 523         usb_kill_urb(dev->urb_ctl);
 524         usb_kill_urb(dev->urb_irq);
 525
 526         cm109_toggle_buzzer_sync(dev, 0);
 527
 528         dev->shutdown = 0;
 529         smp_wmb();
 530 }
 531
 532 static void cm109_restore_state(struct cm109_dev *dev)
 533 {
 534         if (dev->open) {
 535                 /*
 536                  * Restore buzzer state.
 537                  * This will also kick regular URB submission
 538                  */
 539                 cm109_toggle_buzzer_async(dev);
 540         }
 541 }
 542
 543 /******************************************************************************
 544  * input event interface
 545  *****************************************************************************/
 546
 547 static int cm109_input_open(struct input_dev *idev)
 548 {
 549         struct cm109_dev *dev = input_get_drvdata(idev);
 550         int error;
 551
 552         error = usb_autopm_get_interface(dev->intf);
 553         if (error < 0) {
 554                 dev_err(&idev->dev, "%s - cannot autoresume, result %d\n",
 555                         __func__, error);
 556                 return error;
 557         }
 558
 559         mutex_lock(&dev->pm_mutex);
 560
 561         dev->buzzer_state = 0;
 562         dev->key_code = -1;     /* no keys pressed */
 563         dev->keybit = 0xf;
 564
 565         /* issue INIT */
 566         dev->ctl_data->byte[HID_OR0] = HID_OR_GPO_BUZ_SPDIF;
 567         dev->ctl_data->byte[HID_OR1] = dev->keybit;
 568         dev->ctl_data->byte[HID_OR2] = dev->keybit;
 569         dev->ctl_data->byte[HID_OR3] = 0x00;
 570
 571         error = usb_submit_urb(dev->urb_ctl, GFP_KERNEL);
 572         if (error)
 573                 dev_err(&dev->intf->dev, "%s: usb_submit_urb (urb_ctl) failed %d\n",
 574                         __func__, error);
 575         else
 576                 dev->open = 1;
 577
 578         mutex_unlock(&dev->pm_mutex);
 579
 580         if (error)
 581                 usb_autopm_put_interface(dev->intf);
 582
 583         return error;
 584 }
 585
 586 static void cm109_input_close(struct input_dev *idev)
 587 {
 588         struct cm109_dev *dev = input_get_drvdata(idev);
 589
 590         mutex_lock(&dev->pm_mutex);
 591
 592         /*
 593          * Once we are here event delivery is stopped so we
 594          * don't need to worry about someone starting buzzer
 595          * again
 596          */
 597         cm109_stop_traffic(dev);
 598         dev->open = 0;
 599
 600         mutex_unlock(&dev->pm_mutex);
 601
 602         usb_autopm_put_interface(dev->intf);
 603 }
 604
 605 static int cm109_input_ev(struct input_dev *idev, unsigned int type,
 606                           unsigned int code, int value)
 607 {
 608         struct cm109_dev *dev = input_get_drvdata(idev);
 609
 610         dev_dbg(&dev->intf->dev,
 611                 "input_ev: type=%u code=%u value=%d\n", type, code, value);
 612
 613         if (type != EV_SND)
 614                 return -EINVAL;
 615
 616         switch (code) {
 617         case SND_TONE:
 618         case SND_BELL:
 619                 dev->buzzer_state = !!value;
 620                 if (!dev->resetting)
 621                         cm109_toggle_buzzer_async(dev);
 622                 return 0;
 623
 624         default:
 625                 return -EINVAL;
 626         }
 627 }
 628
 629
 630 /******************************************************************************
 631  * Linux interface and usb initialisation
 632  *****************************************************************************/
 633
 634 struct driver_info {
 635         char *name;
 636 };
 637
 638 static const struct driver_info info_cm109 = {
 639         .name = "CM109 USB driver",
 640 };
 641
 642 enum {
 643         VENDOR_ID        = 0x0d8c, /* C-Media Electronics */
 644         PRODUCT_ID_CM109 = 0x000e, /* CM109 defines range 0x0008 - 0x000f */
 645 };
 646
 647 /* table of devices that work with this driver */
 648 static const struct usb_device_id cm109_usb_table[] = {
 649         {
 650                 .match_flags = USB_DEVICE_ID_MATCH_DEVICE |
 651                                 USB_DEVICE_ID_MATCH_INT_INFO,
 652                 .idVendor = VENDOR_ID,
 653                 .idProduct = PRODUCT_ID_CM109,
 654                 .bInterfaceClass = USB_CLASS_HID,
 655                 .bInterfaceSubClass = 0,
 656                 .bInterfaceProtocol = 0,
 657                 .driver_info = (kernel_ulong_t) &info_cm109
 658         },
 659         /* you can add more devices here with product ID 0x0008 - 0x000f */
 660         { }
 661 };
 662
 663 static void cm109_usb_cleanup(struct cm109_dev *dev)
 664 {
 665         kfree(dev->ctl_req);
 666         if (dev->ctl_data)
 667                 usb_free_coherent(dev->udev, USB_PKT_LEN,
 668                                   dev->ctl_data, dev->ctl_dma);
 669         if (dev->irq_data)
 670                 usb_free_coherent(dev->udev, USB_PKT_LEN,
 671                                   dev->irq_data, dev->irq_dma);
 672
 673         usb_free_urb(dev->urb_irq);     /* parameter validation in core/urb */
 674         usb_free_urb(dev->urb_ctl);     /* parameter validation in core/urb */
 675         kfree(dev);
 676 }
 677
 678 static void cm109_usb_disconnect(struct usb_interface *interface)
 679 {
 680         struct cm109_dev *dev = usb_get_intfdata(interface);
 681
 682         usb_set_intfdata(interface, NULL);
 683         input_unregister_device(dev->idev);
 684         cm109_usb_cleanup(dev);
 685 }
 686
 687 static int cm109_usb_probe(struct usb_interface *intf,
 688                            const struct usb_device_id *id)
 689 {
 690         struct usb_device *udev = interface_to_usbdev(intf);
 691         struct driver_info *nfo = (struct driver_info *)id->driver_info;
 692         struct usb_host_interface *interface;
 693         struct usb_endpoint_descriptor *endpoint;
 694         struct cm109_dev *dev;
 695         struct input_dev *input_dev = NULL;
 696         int ret, pipe, i;
 697         int error = -ENOMEM;
 698
 699         interface = intf->cur_altsetting;
 700
 701         if (interface->desc.bNumEndpoints < 1)
 702                 return -ENODEV;
 703
 704         endpoint = &interface->endpoint[0].desc;
 705
 706         if (!usb_endpoint_is_int_in(endpoint))
 707                 return -ENODEV;
 708
 709         dev = kzalloc(sizeof(*dev), GFP_KERNEL);
 710         if (!dev)
 711                 return -ENOMEM;
 712
 713         spin_lock_init(&dev->ctl_submit_lock);
 714         mutex_init(&dev->pm_mutex);
 715
 716         dev->udev = udev;
 717         dev->intf = intf;
 718
 719         dev->idev = input_dev = input_allocate_device();
 720         if (!input_dev)
 721                 goto err_out;
 722
 723         /* allocate usb buffers */
 724         dev->irq_data = usb_alloc_coherent(udev, USB_PKT_LEN,
 725                                            GFP_KERNEL, &dev->irq_dma);
 726         if (!dev->irq_data)
 727                 goto err_out;
 728
 729         dev->ctl_data = usb_alloc_coherent(udev, USB_PKT_LEN,
 730                                            GFP_KERNEL, &dev->ctl_dma);
 731         if (!dev->ctl_data)
 732                 goto err_out;
 733
 734         dev->ctl_req = kmalloc(sizeof(*(dev->ctl_req)), GFP_KERNEL);
 735         if (!dev->ctl_req)
 736                 goto err_out;
 737
 738         /* allocate urb structures */
 739         dev->urb_irq = usb_alloc_urb(0, GFP_KERNEL);
 740         if (!dev->urb_irq)
 741                 goto err_out;
 742
 743         dev->urb_ctl = usb_alloc_urb(0, GFP_KERNEL);
 744         if (!dev->urb_ctl)
 745                 goto err_out;
 746
 747         /* get a handle to the interrupt data pipe */
 748         pipe = usb_rcvintpipe(udev, endpoint->bEndpointAddress);
 749         ret = usb_maxpacket(udev, pipe, usb_pipeout(pipe));
 750         if (ret != USB_PKT_LEN)
 751                 dev_err(&intf->dev, "invalid payload size %d, expected %d\n",
 752                         ret, USB_PKT_LEN);
 753
 754         /* initialise irq urb */
 755         usb_fill_int_urb(dev->urb_irq, udev, pipe, dev->irq_data,
 756                          USB_PKT_LEN,
 757                          cm109_urb_irq_callback, dev, endpoint->bInterval);
 758         dev->urb_irq->transfer_dma = dev->irq_dma;
 759         dev->urb_irq->transfer_flags |= URB_NO_TRANSFER_DMA_MAP;
 760         dev->urb_irq->dev = udev;
 761
 762         /* initialise ctl urb */
 763         dev->ctl_req->bRequestType = USB_TYPE_CLASS | USB_RECIP_INTERFACE |
 764                                         USB_DIR_OUT;
 765         dev->ctl_req->bRequest = USB_REQ_SET_CONFIGURATION;
 766         dev->ctl_req->wValue = cpu_to_le16(0x200);
 767         dev->ctl_req->wIndex = cpu_to_le16(interface->desc.bInterfaceNumber);
 768         dev->ctl_req->wLength = cpu_to_le16(USB_PKT_LEN);
 769
 770         usb_fill_control_urb(dev->urb_ctl, udev, usb_sndctrlpipe(udev, 0),
 771                              (void *)dev->ctl_req, dev->ctl_data, USB_PKT_LEN,
 772                              cm109_urb_ctl_callback, dev);
 773         dev->urb_ctl->transfer_dma = dev->ctl_dma;
 774         dev->urb_ctl->transfer_flags |= URB_NO_TRANSFER_DMA_MAP;
 775         dev->urb_ctl->dev = udev;
 776
 777         /* find out the physical bus location */
 778         usb_make_path(udev, dev->phys, sizeof(dev->phys));
 779         strlcat(dev->phys, "/input0", sizeof(dev->phys));
 780
 781         /* register settings for the input device */
 782         input_dev->name = nfo->name;
 783         input_dev->phys = dev->phys;
 784         usb_to_input_id(udev, &input_dev->id);
 785         input_dev->dev.parent = &intf->dev;
 786
 787         input_set_drvdata(input_dev, dev);
 788         input_dev->open = cm109_input_open;
 789         input_dev->close = cm109_input_close;
 790         input_dev->event = cm109_input_ev;
 791
 792         input_dev->keycode = dev->keymap;
 793         input_dev->keycodesize = sizeof(unsigned char);
 794         input_dev->keycodemax = ARRAY_SIZE(dev->keymap);
 795
 796         input_dev->evbit[0] = BIT_MASK(EV_KEY) | BIT_MASK(EV_SND);
 797         input_dev->sndbit[0] = BIT_MASK(SND_BELL) | BIT_MASK(SND_TONE);
 798
 799         /* register available key events */
 800         for (i = 0; i < KEYMAP_SIZE; i++) {
 801                 unsigned short k = keymap(i);
 802                 dev->keymap[i] = k;
 803                 __set_bit(k, input_dev->keybit);
 804         }
 805         __clear_bit(KEY_RESERVED, input_dev->keybit);
 806
 807         error = input_register_device(dev->idev);
 808         if (error)
 809                 goto err_out;
 810
 811         usb_set_intfdata(intf, dev);
 812
 813         return 0;
 814
 815  err_out:
 816         input_free_device(input_dev);
 817         cm109_usb_cleanup(dev);
 818         return error;
 819 }
 820
 821 static int cm109_usb_suspend(struct usb_interface *intf, pm_message_t message)
 822 {
 823         struct cm109_dev *dev = usb_get_intfdata(intf);
 824
 825         dev_info(&intf->dev, "cm109: usb_suspend (event=%d)\n", message.event);
 826
 827         mutex_lock(&dev->pm_mutex);
 828         cm109_stop_traffic(dev);
 829         mutex_unlock(&dev->pm_mutex);
 830
 831         return 0;
 832 }
 833
 834 static int cm109_usb_resume(struct usb_interface *intf)
 835 {
 836         struct cm109_dev *dev = usb_get_intfdata(intf);
 837
 838         dev_info(&intf->dev, "cm109: usb_resume\n");
 839
 840         mutex_lock(&dev->pm_mutex);
 841         cm109_restore_state(dev);
 842         mutex_unlock(&dev->pm_mutex);
 843
 844         return 0;
 845 }
 846
 847 static int cm109_usb_pre_reset(struct usb_interface *intf)
 848 {
 849         struct cm109_dev *dev = usb_get_intfdata(intf);
 850
 851         mutex_lock(&dev->pm_mutex);
 852
 853         /*
 854          * Make sure input events don't try to toggle buzzer
 855          * while we are resetting
 856          */
 857         dev->resetting = 1;
 858         smp_wmb();
 859
 860         cm109_stop_traffic(dev);
 861
 862         return 0;
 863 }
 864
 865 static int cm109_usb_post_reset(struct usb_interface *intf)
 866 {
 867         struct cm109_dev *dev = usb_get_intfdata(intf);
 868
 869         dev->resetting = 0;
 870         smp_wmb();
 871
 872         cm109_restore_state(dev);
 873
 874         mutex_unlock(&dev->pm_mutex);
 875
 876         return 0;
 877 }
 878
 879 static struct usb_driver cm109_driver = {
 880         .name           = "cm109",
 881         .probe          = cm109_usb_probe,
 882         .disconnect     = cm109_usb_disconnect,
 883         .suspend        = cm109_usb_suspend,
 884         .resume         = cm109_usb_resume,
 885         .reset_resume   = cm109_usb_resume,
 886         .pre_reset      = cm109_usb_pre_reset,
 887         .post_reset     = cm109_usb_post_reset,
 888         .id_table       = cm109_usb_table,
 889         .supports_autosuspend = 1,
 890 };
 891
 892 static int __init cm109_select_keymap(void)
 893 {
 894         /* Load the phone keymap */
 895         if (!strcasecmp(phone, "kip1000")) {
 896                 keymap = keymap_kip1000;
 897                 printk(KERN_INFO KBUILD_MODNAME ": "
 898                         "Keymap for Komunikate KIP1000 phone loaded\n");
 899         } else if (!strcasecmp(phone, "gtalk")) {
 900                 keymap = keymap_gtalk;
 901                 printk(KERN_INFO KBUILD_MODNAME ": "
 902                         "Keymap for Genius G-talk phone loaded\n");
 903         } else if (!strcasecmp(phone, "usbph01")) {
 904                 keymap = keymap_usbph01;
 905                 printk(KERN_INFO KBUILD_MODNAME ": "
 906                         "Keymap for Allied-Telesis Corega USBPH01 phone loaded\n");
 907         } else if (!strcasecmp(phone, "atcom")) {
 908                 keymap = keymap_atcom;
 909                 printk(KERN_INFO KBUILD_MODNAME ": "
 910                         "Keymap for ATCom AU-100 phone loaded\n");
 911         } else {
 912                 printk(KERN_ERR KBUILD_MODNAME ": "
 913                         "Unsupported phone: %s\n", phone);
 914                 return -EINVAL;
 915         }
 916
 917         return 0;
 918 }
 919
 920 static int __init cm109_init(void)
 921 {
 922         int err;
 923
 924         err = cm109_select_keymap();
 925         if (err)
 926                 return err;
 927
 928         err = usb_register(&cm109_driver);
 929         if (err)
 930                 return err;
 931
 932         printk(KERN_INFO KBUILD_MODNAME ": "
 933                 DRIVER_DESC ": " DRIVER_VERSION " (C) " DRIVER_AUTHOR "\n");
 934
 935         return 0;
 936 }
 937
 938 static void __exit cm109_exit(void)
 939 {
 940         usb_deregister(&cm109_driver);
 941 }
 942
 943 module_init(cm109_init);
 944 module_exit(cm109_exit);
 945
 946 MODULE_DEVICE_TABLE(usb, cm109_usb_table);
 947
 948 MODULE_AUTHOR(DRIVER_AUTHOR);
 949 MODULE_DESCRIPTION(DRIVER_DESC);
 950 MODULE_LICENSE("GPL");