2 * SPEAr Keyboard Driver
3 * Based on omap-keypad driver
5 * Copyright (C) 2010 ST Microelectronics
6 * Rajeev Kumar <rajeevkumar.linux@gmail.com>
8 * This file is licensed under the terms of the GNU General Public
9 * License version 2. This program is licensed "as is" without any
10 * warranty of any kind, whether express or implied.
13 #include <linux/clk.h>
14 #include <linux/errno.h>
15 #include <linux/interrupt.h>
16 #include <linux/input.h>
18 #include <linux/irq.h>
19 #include <linux/kernel.h>
20 #include <linux/module.h>
22 #include <linux/platform_device.h>
23 #include <linux/pm_wakeup.h>
24 #include <linux/slab.h>
25 #include <linux/types.h>
26 #include <linux/platform_data/keyboard-spear.h>
28 /* Keyboard Registers */
29 #define MODE_CTL_REG 0x00
30 #define STATUS_REG 0x0C
32 #define INTR_MASK 0x54
37 #define MODE_CTL_PCLK_FREQ_SHIFT 9
38 #define MODE_CTL_PCLK_FREQ_MSK 0x7F
40 #define MODE_CTL_KEYBOARD (0x2 << 0)
41 #define MODE_CTL_SCAN_RATE_10 (0x0 << 2)
42 #define MODE_CTL_SCAN_RATE_20 (0x1 << 2)
43 #define MODE_CTL_SCAN_RATE_40 (0x2 << 2)
44 #define MODE_CTL_SCAN_RATE_80 (0x3 << 2)
45 #define MODE_CTL_KEYNUM_SHIFT 6
46 #define MODE_CTL_START_SCAN (0x1 << 8)
48 #define STATUS_DATA_AVAIL (0x1 << 1)
50 #define DATA_ROW_MASK 0xF0
51 #define DATA_COLUMN_MASK 0x0F
56 struct input_dev *input;
57 void __iomem *io_base;
61 unsigned int suspended_rate;
62 unsigned short last_key;
63 unsigned short keycodes[NUM_ROWS * NUM_COLS];
65 bool irq_wake_enabled;
69 static irqreturn_t spear_kbd_interrupt(int irq, void *dev_id)
71 struct spear_kbd *kbd = dev_id;
72 struct input_dev *input = kbd->input;
76 sts = readl_relaxed(kbd->io_base + STATUS_REG);
77 if (!(sts & STATUS_DATA_AVAIL))
80 if (kbd->last_key != KEY_RESERVED) {
81 input_report_key(input, kbd->last_key, 0);
82 kbd->last_key = KEY_RESERVED;
85 /* following reads active (row, col) pair */
86 val = readl_relaxed(kbd->io_base + DATA_REG) &
87 (DATA_ROW_MASK | DATA_COLUMN_MASK);
88 key = kbd->keycodes[val];
90 input_event(input, EV_MSC, MSC_SCAN, val);
91 input_report_key(input, key, 1);
97 writel_relaxed(0, kbd->io_base + STATUS_REG);
102 static int spear_kbd_open(struct input_dev *dev)
104 struct spear_kbd *kbd = input_get_drvdata(dev);
108 kbd->last_key = KEY_RESERVED;
110 error = clk_enable(kbd->clk);
114 /* keyboard rate to be programmed is input clock (in MHz) - 1 */
115 val = clk_get_rate(kbd->clk) / 1000000 - 1;
116 val = (val & MODE_CTL_PCLK_FREQ_MSK) << MODE_CTL_PCLK_FREQ_SHIFT;
118 /* program keyboard */
119 val = MODE_CTL_SCAN_RATE_80 | MODE_CTL_KEYBOARD | val |
120 (kbd->mode << MODE_CTL_KEYNUM_SHIFT);
121 writel_relaxed(val, kbd->io_base + MODE_CTL_REG);
122 writel_relaxed(1, kbd->io_base + STATUS_REG);
125 val = readl_relaxed(kbd->io_base + MODE_CTL_REG);
126 val |= MODE_CTL_START_SCAN;
127 writel_relaxed(val, kbd->io_base + MODE_CTL_REG);
132 static void spear_kbd_close(struct input_dev *dev)
134 struct spear_kbd *kbd = input_get_drvdata(dev);
138 val = readl_relaxed(kbd->io_base + MODE_CTL_REG);
139 val &= ~MODE_CTL_START_SCAN;
140 writel_relaxed(val, kbd->io_base + MODE_CTL_REG);
142 clk_disable(kbd->clk);
144 kbd->last_key = KEY_RESERVED;
148 static int spear_kbd_parse_dt(struct platform_device *pdev,
149 struct spear_kbd *kbd)
151 struct device_node *np = pdev->dev.of_node;
153 u32 val, suspended_rate;
156 dev_err(&pdev->dev, "Missing DT data\n");
160 if (of_property_read_bool(np, "autorepeat"))
163 if (of_property_read_u32(np, "suspended_rate", &suspended_rate))
164 kbd->suspended_rate = suspended_rate;
166 error = of_property_read_u32(np, "st,mode", &val);
168 dev_err(&pdev->dev, "DT: Invalid or missing mode\n");
176 static inline int spear_kbd_parse_dt(struct platform_device *pdev,
177 struct spear_kbd *kbd)
183 static int spear_kbd_probe(struct platform_device *pdev)
185 struct kbd_platform_data *pdata = dev_get_platdata(&pdev->dev);
186 const struct matrix_keymap_data *keymap = pdata ? pdata->keymap : NULL;
187 struct spear_kbd *kbd;
188 struct input_dev *input_dev;
192 irq = platform_get_irq(pdev, 0);
196 kbd = devm_kzalloc(&pdev->dev, sizeof(*kbd), GFP_KERNEL);
198 dev_err(&pdev->dev, "not enough memory for driver data\n");
202 input_dev = devm_input_allocate_device(&pdev->dev);
204 dev_err(&pdev->dev, "unable to allocate input device\n");
208 kbd->input = input_dev;
212 error = spear_kbd_parse_dt(pdev, kbd);
216 kbd->mode = pdata->mode;
217 kbd->rep = pdata->rep;
218 kbd->suspended_rate = pdata->suspended_rate;
221 kbd->io_base = devm_platform_get_and_ioremap_resource(pdev, 0, NULL);
222 if (IS_ERR(kbd->io_base))
223 return PTR_ERR(kbd->io_base);
225 kbd->clk = devm_clk_get(&pdev->dev, NULL);
226 if (IS_ERR(kbd->clk))
227 return PTR_ERR(kbd->clk);
229 input_dev->name = "Spear Keyboard";
230 input_dev->phys = "keyboard/input0";
231 input_dev->id.bustype = BUS_HOST;
232 input_dev->id.vendor = 0x0001;
233 input_dev->id.product = 0x0001;
234 input_dev->id.version = 0x0100;
235 input_dev->open = spear_kbd_open;
236 input_dev->close = spear_kbd_close;
238 error = matrix_keypad_build_keymap(keymap, NULL, NUM_ROWS, NUM_COLS,
239 kbd->keycodes, input_dev);
241 dev_err(&pdev->dev, "Failed to build keymap\n");
246 __set_bit(EV_REP, input_dev->evbit);
247 input_set_capability(input_dev, EV_MSC, MSC_SCAN);
249 input_set_drvdata(input_dev, kbd);
251 error = devm_request_irq(&pdev->dev, irq, spear_kbd_interrupt, 0,
254 dev_err(&pdev->dev, "request_irq failed\n");
258 error = clk_prepare(kbd->clk);
262 error = input_register_device(input_dev);
264 dev_err(&pdev->dev, "Unable to register keyboard device\n");
265 clk_unprepare(kbd->clk);
269 device_init_wakeup(&pdev->dev, 1);
270 platform_set_drvdata(pdev, kbd);
275 static void spear_kbd_remove(struct platform_device *pdev)
277 struct spear_kbd *kbd = platform_get_drvdata(pdev);
279 input_unregister_device(kbd->input);
280 clk_unprepare(kbd->clk);
283 static int spear_kbd_suspend(struct device *dev)
285 struct platform_device *pdev = to_platform_device(dev);
286 struct spear_kbd *kbd = platform_get_drvdata(pdev);
287 struct input_dev *input_dev = kbd->input;
288 unsigned int rate = 0, mode_ctl_reg, val;
290 mutex_lock(&input_dev->mutex);
292 /* explicitly enable clock as we may program device */
293 clk_enable(kbd->clk);
295 mode_ctl_reg = readl_relaxed(kbd->io_base + MODE_CTL_REG);
297 if (device_may_wakeup(&pdev->dev)) {
298 if (!enable_irq_wake(kbd->irq))
299 kbd->irq_wake_enabled = true;
302 * reprogram the keyboard operating frequency as on some
303 * platform it may change during system suspended
305 if (kbd->suspended_rate)
306 rate = kbd->suspended_rate / 1000000 - 1;
308 rate = clk_get_rate(kbd->clk) / 1000000 - 1;
311 ~(MODE_CTL_PCLK_FREQ_MSK << MODE_CTL_PCLK_FREQ_SHIFT);
312 val |= (rate & MODE_CTL_PCLK_FREQ_MSK)
313 << MODE_CTL_PCLK_FREQ_SHIFT;
314 writel_relaxed(val, kbd->io_base + MODE_CTL_REG);
317 if (input_device_enabled(input_dev)) {
318 writel_relaxed(mode_ctl_reg & ~MODE_CTL_START_SCAN,
319 kbd->io_base + MODE_CTL_REG);
320 clk_disable(kbd->clk);
324 /* store current configuration */
325 if (input_device_enabled(input_dev))
326 kbd->mode_ctl_reg = mode_ctl_reg;
328 /* restore previous clk state */
329 clk_disable(kbd->clk);
331 mutex_unlock(&input_dev->mutex);
336 static int spear_kbd_resume(struct device *dev)
338 struct platform_device *pdev = to_platform_device(dev);
339 struct spear_kbd *kbd = platform_get_drvdata(pdev);
340 struct input_dev *input_dev = kbd->input;
342 mutex_lock(&input_dev->mutex);
344 if (device_may_wakeup(&pdev->dev)) {
345 if (kbd->irq_wake_enabled) {
346 kbd->irq_wake_enabled = false;
347 disable_irq_wake(kbd->irq);
350 if (input_device_enabled(input_dev))
351 clk_enable(kbd->clk);
354 /* restore current configuration */
355 if (input_device_enabled(input_dev))
356 writel_relaxed(kbd->mode_ctl_reg, kbd->io_base + MODE_CTL_REG);
358 mutex_unlock(&input_dev->mutex);
363 static DEFINE_SIMPLE_DEV_PM_OPS(spear_kbd_pm_ops,
364 spear_kbd_suspend, spear_kbd_resume);
367 static const struct of_device_id spear_kbd_id_table[] = {
368 { .compatible = "st,spear300-kbd" },
371 MODULE_DEVICE_TABLE(of, spear_kbd_id_table);
374 static struct platform_driver spear_kbd_driver = {
375 .probe = spear_kbd_probe,
376 .remove_new = spear_kbd_remove,
379 .pm = pm_sleep_ptr(&spear_kbd_pm_ops),
380 .of_match_table = of_match_ptr(spear_kbd_id_table),
383 module_platform_driver(spear_kbd_driver);
385 MODULE_AUTHOR("Rajeev Kumar");
386 MODULE_DESCRIPTION("SPEAr Keyboard Driver");
387 MODULE_LICENSE("GPL");