drivers/iio/pressure/hid-sensor-press.c

   1 // SPDX-License-Identifier: GPL-2.0-only
   2 /*
   3  * HID Sensors Driver
   4  * Copyright (c) 2014, Intel Corporation.
   5  */
   6 #include <linux/device.h>
   7 #include <linux/platform_device.h>
   8 #include <linux/module.h>
   9 #include <linux/interrupt.h>
  10 #include <linux/irq.h>
  11 #include <linux/slab.h>
  12 #include <linux/delay.h>
  13 #include <linux/hid-sensor-hub.h>
  14 #include <linux/iio/iio.h>
  15 #include <linux/iio/sysfs.h>
  16 #include <linux/iio/buffer.h>
  17 #include <linux/iio/trigger_consumer.h>
  18 #include <linux/iio/triggered_buffer.h>
  19 #include "../common/hid-sensors/hid-sensor-trigger.h"
  20
  21 #define CHANNEL_SCAN_INDEX_PRESSURE 0
  22
  23 struct press_state {
  24         struct hid_sensor_hub_callbacks callbacks;
  25         struct hid_sensor_common common_attributes;
  26         struct hid_sensor_hub_attribute_info press_attr;
  27         u32 press_data;
  28         int scale_pre_decml;
  29         int scale_post_decml;
  30         int scale_precision;
  31         int value_offset;
  32 };
  33
  34 /* Channel definitions */
  35 static const struct iio_chan_spec press_channels[] = {
  36         {
  37                 .type = IIO_PRESSURE,
  38                 .info_mask_separate = BIT(IIO_CHAN_INFO_RAW),
  39                 .info_mask_shared_by_type = BIT(IIO_CHAN_INFO_OFFSET) |
  40                 BIT(IIO_CHAN_INFO_SCALE) |
  41                 BIT(IIO_CHAN_INFO_SAMP_FREQ) |
  42                 BIT(IIO_CHAN_INFO_HYSTERESIS),
  43                 .scan_index = CHANNEL_SCAN_INDEX_PRESSURE,
  44         }
  45 };
  46
  47 /* Adjust channel real bits based on report descriptor */
  48 static void press_adjust_channel_bit_mask(struct iio_chan_spec *channels,
  49                                         int channel, int size)
  50 {
  51         channels[channel].scan_type.sign = 's';
  52         /* Real storage bits will change based on the report desc. */
  53         channels[channel].scan_type.realbits = size * 8;
  54         /* Maximum size of a sample to capture is u32 */
  55         channels[channel].scan_type.storagebits = sizeof(u32) * 8;
  56 }
  57
  58 /* Channel read_raw handler */
  59 static int press_read_raw(struct iio_dev *indio_dev,
  60                               struct iio_chan_spec const *chan,
  61                               int *val, int *val2,
  62                               long mask)
  63 {
  64         struct press_state *press_state = iio_priv(indio_dev);
  65         int report_id = -1;
  66         u32 address;
  67         int ret_type;
  68         s32 min;
  69
  70         *val = 0;
  71         *val2 = 0;
  72         switch (mask) {
  73         case IIO_CHAN_INFO_RAW:
  74                 switch (chan->scan_index) {
  75                 case  CHANNEL_SCAN_INDEX_PRESSURE:
  76                         report_id = press_state->press_attr.report_id;
  77                         min = press_state->press_attr.logical_minimum;
  78                         address = HID_USAGE_SENSOR_ATMOSPHERIC_PRESSURE;
  79                         break;
  80                 default:
  81                         report_id = -1;
  82                         break;
  83                 }
  84                 if (report_id >= 0) {
  85                         hid_sensor_power_state(&press_state->common_attributes,
  86                                                 true);
  87                         *val = sensor_hub_input_attr_get_raw_value(
  88                                 press_state->common_attributes.hsdev,
  89                                 HID_USAGE_SENSOR_PRESSURE, address,
  90                                 report_id,
  91                                 SENSOR_HUB_SYNC,
  92                                 min < 0);
  93                         hid_sensor_power_state(&press_state->common_attributes,
  94                                                 false);
  95                 } else {
  96                         *val = 0;
  97                         return -EINVAL;
  98                 }
  99                 ret_type = IIO_VAL_INT;
 100                 break;
 101         case IIO_CHAN_INFO_SCALE:
 102                 *val = press_state->scale_pre_decml;
 103                 *val2 = press_state->scale_post_decml;
 104                 ret_type = press_state->scale_precision;
 105                 break;
 106         case IIO_CHAN_INFO_OFFSET:
 107                 *val = press_state->value_offset;
 108                 ret_type = IIO_VAL_INT;
 109                 break;
 110         case IIO_CHAN_INFO_SAMP_FREQ:
 111                 ret_type = hid_sensor_read_samp_freq_value(
 112                                 &press_state->common_attributes, val, val2);
 113                 break;
 114         case IIO_CHAN_INFO_HYSTERESIS:
 115                 ret_type = hid_sensor_read_raw_hyst_value(
 116                                 &press_state->common_attributes, val, val2);
 117                 break;
 118         default:
 119                 ret_type = -EINVAL;
 120                 break;
 121         }
 122
 123         return ret_type;
 124 }
 125
 126 /* Channel write_raw handler */
 127 static int press_write_raw(struct iio_dev *indio_dev,
 128                                struct iio_chan_spec const *chan,
 129                                int val,
 130                                int val2,
 131                                long mask)
 132 {
 133         struct press_state *press_state = iio_priv(indio_dev);
 134         int ret = 0;
 135
 136         switch (mask) {
 137         case IIO_CHAN_INFO_SAMP_FREQ:
 138                 ret = hid_sensor_write_samp_freq_value(
 139                                 &press_state->common_attributes, val, val2);
 140                 break;
 141         case IIO_CHAN_INFO_HYSTERESIS:
 142                 ret = hid_sensor_write_raw_hyst_value(
 143                                 &press_state->common_attributes, val, val2);
 144                 break;
 145         default:
 146                 ret = -EINVAL;
 147         }
 148
 149         return ret;
 150 }
 151
 152 static const struct iio_info press_info = {
 153         .read_raw = &press_read_raw,
 154         .write_raw = &press_write_raw,
 155 };
 156
 157 /* Function to push data to buffer */
 158 static void hid_sensor_push_data(struct iio_dev *indio_dev, const void *data,
 159                                         int len)
 160 {
 161         dev_dbg(&indio_dev->dev, "hid_sensor_push_data\n");
 162         iio_push_to_buffers(indio_dev, data);
 163 }
 164
 165 /* Callback handler to send event after all samples are received and captured */
 166 static int press_proc_event(struct hid_sensor_hub_device *hsdev,
 167                                 unsigned usage_id,
 168                                 void *priv)
 169 {
 170         struct iio_dev *indio_dev = platform_get_drvdata(priv);
 171         struct press_state *press_state = iio_priv(indio_dev);
 172
 173         dev_dbg(&indio_dev->dev, "press_proc_event\n");
 174         if (atomic_read(&press_state->common_attributes.data_ready))
 175                 hid_sensor_push_data(indio_dev,
 176                                 &press_state->press_data,
 177                                 sizeof(press_state->press_data));
 178
 179         return 0;
 180 }
 181
 182 /* Capture samples in local storage */
 183 static int press_capture_sample(struct hid_sensor_hub_device *hsdev,
 184                                 unsigned usage_id,
 185                                 size_t raw_len, char *raw_data,
 186                                 void *priv)
 187 {
 188         struct iio_dev *indio_dev = platform_get_drvdata(priv);
 189         struct press_state *press_state = iio_priv(indio_dev);
 190         int ret = -EINVAL;
 191
 192         switch (usage_id) {
 193         case HID_USAGE_SENSOR_ATMOSPHERIC_PRESSURE:
 194                 press_state->press_data = *(u32 *)raw_data;
 195                 ret = 0;
 196                 break;
 197         default:
 198                 break;
 199         }
 200
 201         return ret;
 202 }
 203
 204 /* Parse report which is specific to an usage id*/
 205 static int press_parse_report(struct platform_device *pdev,
 206                                 struct hid_sensor_hub_device *hsdev,
 207                                 struct iio_chan_spec *channels,
 208                                 unsigned usage_id,
 209                                 struct press_state *st)
 210 {
 211         int ret;
 212
 213         ret = sensor_hub_input_get_attribute_info(hsdev, HID_INPUT_REPORT,
 214                         usage_id,
 215                         HID_USAGE_SENSOR_ATMOSPHERIC_PRESSURE,
 216                         &st->press_attr);
 217         if (ret < 0)
 218                 return ret;
 219         press_adjust_channel_bit_mask(channels, CHANNEL_SCAN_INDEX_PRESSURE,
 220                                         st->press_attr.size);
 221
 222         dev_dbg(&pdev->dev, "press %x:%x\n", st->press_attr.index,
 223                         st->press_attr.report_id);
 224
 225         st->scale_precision = hid_sensor_format_scale(
 226                                 HID_USAGE_SENSOR_PRESSURE,
 227                                 &st->press_attr,
 228                                 &st->scale_pre_decml, &st->scale_post_decml);
 229
 230         /* Set Sensitivity field ids, when there is no individual modifier */
 231         if (st->common_attributes.sensitivity.index < 0) {
 232                 sensor_hub_input_get_attribute_info(hsdev,
 233                         HID_FEATURE_REPORT, usage_id,
 234                         HID_USAGE_SENSOR_DATA_MOD_CHANGE_SENSITIVITY_ABS |
 235                         HID_USAGE_SENSOR_DATA_ATMOSPHERIC_PRESSURE,
 236                         &st->common_attributes.sensitivity);
 237                 dev_dbg(&pdev->dev, "Sensitivity index:report %d:%d\n",
 238                         st->common_attributes.sensitivity.index,
 239                         st->common_attributes.sensitivity.report_id);
 240         }
 241         return ret;
 242 }
 243
 244 /* Function to initialize the processing for usage id */
 245 static int hid_press_probe(struct platform_device *pdev)
 246 {
 247         int ret = 0;
 248         static const char *name = "press";
 249         struct iio_dev *indio_dev;
 250         struct press_state *press_state;
 251         struct hid_sensor_hub_device *hsdev = pdev->dev.platform_data;
 252
 253         indio_dev = devm_iio_device_alloc(&pdev->dev,
 254                                 sizeof(struct press_state));
 255         if (!indio_dev)
 256                 return -ENOMEM;
 257         platform_set_drvdata(pdev, indio_dev);
 258
 259         press_state = iio_priv(indio_dev);
 260         press_state->common_attributes.hsdev = hsdev;
 261         press_state->common_attributes.pdev = pdev;
 262
 263         ret = hid_sensor_parse_common_attributes(hsdev,
 264                                         HID_USAGE_SENSOR_PRESSURE,
 265                                         &press_state->common_attributes);
 266         if (ret) {
 267                 dev_err(&pdev->dev, "failed to setup common attributes\n");
 268                 return ret;
 269         }
 270
 271         indio_dev->channels = kmemdup(press_channels, sizeof(press_channels),
 272                                       GFP_KERNEL);
 273         if (!indio_dev->channels) {
 274                 dev_err(&pdev->dev, "failed to duplicate channels\n");
 275                 return -ENOMEM;
 276         }
 277
 278         ret = press_parse_report(pdev, hsdev,
 279                                  (struct iio_chan_spec *)indio_dev->channels,
 280                                  HID_USAGE_SENSOR_PRESSURE, press_state);
 281         if (ret) {
 282                 dev_err(&pdev->dev, "failed to setup attributes\n");
 283                 goto error_free_dev_mem;
 284         }
 285
 286         indio_dev->num_channels =
 287                                 ARRAY_SIZE(press_channels);
 288         indio_dev->dev.parent = &pdev->dev;
 289         indio_dev->info = &press_info;
 290         indio_dev->name = name;
 291         indio_dev->modes = INDIO_DIRECT_MODE;
 292
 293         ret = iio_triggered_buffer_setup(indio_dev, &iio_pollfunc_store_time,
 294                 NULL, NULL);
 295         if (ret) {
 296                 dev_err(&pdev->dev, "failed to initialize trigger buffer\n");
 297                 goto error_free_dev_mem;
 298         }
 299         atomic_set(&press_state->common_attributes.data_ready, 0);
 300         ret = hid_sensor_setup_trigger(indio_dev, name,
 301                                 &press_state->common_attributes);
 302         if (ret) {
 303                 dev_err(&pdev->dev, "trigger setup failed\n");
 304                 goto error_unreg_buffer_funcs;
 305         }
 306
 307         ret = iio_device_register(indio_dev);
 308         if (ret) {
 309                 dev_err(&pdev->dev, "device register failed\n");
 310                 goto error_remove_trigger;
 311         }
 312
 313         press_state->callbacks.send_event = press_proc_event;
 314         press_state->callbacks.capture_sample = press_capture_sample;
 315         press_state->callbacks.pdev = pdev;
 316         ret = sensor_hub_register_callback(hsdev, HID_USAGE_SENSOR_PRESSURE,
 317                                         &press_state->callbacks);
 318         if (ret < 0) {
 319                 dev_err(&pdev->dev, "callback reg failed\n");
 320                 goto error_iio_unreg;
 321         }
 322
 323         return ret;
 324
 325 error_iio_unreg:
 326         iio_device_unregister(indio_dev);
 327 error_remove_trigger:
 328         hid_sensor_remove_trigger(&press_state->common_attributes);
 329 error_unreg_buffer_funcs:
 330         iio_triggered_buffer_cleanup(indio_dev);
 331 error_free_dev_mem:
 332         kfree(indio_dev->channels);
 333         return ret;
 334 }
 335
 336 /* Function to deinitialize the processing for usage id */
 337 static int hid_press_remove(struct platform_device *pdev)
 338 {
 339         struct hid_sensor_hub_device *hsdev = pdev->dev.platform_data;
 340         struct iio_dev *indio_dev = platform_get_drvdata(pdev);
 341         struct press_state *press_state = iio_priv(indio_dev);
 342
 343         sensor_hub_remove_callback(hsdev, HID_USAGE_SENSOR_PRESSURE);
 344         iio_device_unregister(indio_dev);
 345         hid_sensor_remove_trigger(&press_state->common_attributes);
 346         iio_triggered_buffer_cleanup(indio_dev);
 347         kfree(indio_dev->channels);
 348
 349         return 0;
 350 }
 351
 352 static const struct platform_device_id hid_press_ids[] = {
 353         {
 354                 /* Format: HID-SENSOR-usage_id_in_hex_lowercase */
 355                 .name = "HID-SENSOR-200031",
 356         },
 357         { /* sentinel */ }
 358 };
 359 MODULE_DEVICE_TABLE(platform, hid_press_ids);
 360
 361 static struct platform_driver hid_press_platform_driver = {
 362         .id_table = hid_press_ids,
 363         .driver = {
 364                 .name   = KBUILD_MODNAME,
 365                 .pm     = &hid_sensor_pm_ops,
 366         },
 367         .probe          = hid_press_probe,
 368         .remove         = hid_press_remove,
 369 };
 370 module_platform_driver(hid_press_platform_driver);
 371
 372 MODULE_DESCRIPTION("HID Sensor Pressure");
 373 MODULE_AUTHOR("Archana Patni <archana.patni@intel.com>");
 374 MODULE_LICENSE("GPL");