drivers/iio/light/tsl2563.c

   1 // SPDX-License-Identifier: GPL-2.0-only
   2 /*
   3  * drivers/iio/light/tsl2563.c
   4  *
   5  * Copyright (C) 2008 Nokia Corporation
   6  *
   7  * Written by Timo O. Karjalainen <timo.o.karjalainen@nokia.com>
   8  * Contact: Amit Kucheria <amit.kucheria@verdurent.com>
   9  *
  10  * Converted to IIO driver
  11  * Amit Kucheria <amit.kucheria@verdurent.com>
  12  */
  13
  14 #include <linux/module.h>
  15 #include <linux/mod_devicetable.h>
  16 #include <linux/property.h>
  17 #include <linux/i2c.h>
  18 #include <linux/interrupt.h>
  19 #include <linux/irq.h>
  20 #include <linux/sched.h>
  21 #include <linux/mutex.h>
  22 #include <linux/delay.h>
  23 #include <linux/pm.h>
  24 #include <linux/err.h>
  25 #include <linux/slab.h>
  26
  27 #include <linux/iio/iio.h>
  28 #include <linux/iio/sysfs.h>
  29 #include <linux/iio/events.h>
  30 #include <linux/platform_data/tsl2563.h>
  31
  32 /* Use this many bits for fraction part. */
  33 #define ADC_FRAC_BITS           14
  34
  35 /* Given number of 1/10000's in ADC_FRAC_BITS precision. */
  36 #define FRAC10K(f)              (((f) * (1L << (ADC_FRAC_BITS))) / (10000))
  37
  38 /* Bits used for fraction in calibration coefficients.*/
  39 #define CALIB_FRAC_BITS         10
  40 /* 0.5 in CALIB_FRAC_BITS precision */
  41 #define CALIB_FRAC_HALF         (1 << (CALIB_FRAC_BITS - 1))
  42 /* Make a fraction from a number n that was multiplied with b. */
  43 #define CALIB_FRAC(n, b)        (((n) << CALIB_FRAC_BITS) / (b))
  44 /* Decimal 10^(digits in sysfs presentation) */
  45 #define CALIB_BASE_SYSFS        1000
  46
  47 #define TSL2563_CMD             0x80
  48 #define TSL2563_CLEARINT        0x40
  49
  50 #define TSL2563_REG_CTRL        0x00
  51 #define TSL2563_REG_TIMING      0x01
  52 #define TSL2563_REG_LOWLOW      0x02 /* data0 low threshold, 2 bytes */
  53 #define TSL2563_REG_LOWHIGH     0x03
  54 #define TSL2563_REG_HIGHLOW     0x04 /* data0 high threshold, 2 bytes */
  55 #define TSL2563_REG_HIGHHIGH    0x05
  56 #define TSL2563_REG_INT         0x06
  57 #define TSL2563_REG_ID          0x0a
  58 #define TSL2563_REG_DATA0LOW    0x0c /* broadband sensor value, 2 bytes */
  59 #define TSL2563_REG_DATA0HIGH   0x0d
  60 #define TSL2563_REG_DATA1LOW    0x0e /* infrared sensor value, 2 bytes */
  61 #define TSL2563_REG_DATA1HIGH   0x0f
  62
  63 #define TSL2563_CMD_POWER_ON    0x03
  64 #define TSL2563_CMD_POWER_OFF   0x00
  65 #define TSL2563_CTRL_POWER_MASK 0x03
  66
  67 #define TSL2563_TIMING_13MS     0x00
  68 #define TSL2563_TIMING_100MS    0x01
  69 #define TSL2563_TIMING_400MS    0x02
  70 #define TSL2563_TIMING_MASK     0x03
  71 #define TSL2563_TIMING_GAIN16   0x10
  72 #define TSL2563_TIMING_GAIN1    0x00
  73
  74 #define TSL2563_INT_DISABLED    0x00
  75 #define TSL2563_INT_LEVEL       0x10
  76 #define TSL2563_INT_PERSIST(n)  ((n) & 0x0F)
  77
  78 struct tsl2563_gainlevel_coeff {
  79         u8 gaintime;
  80         u16 min;
  81         u16 max;
  82 };
  83
  84 static const struct tsl2563_gainlevel_coeff tsl2563_gainlevel_table[] = {
  85         {
  86                 .gaintime       = TSL2563_TIMING_400MS | TSL2563_TIMING_GAIN16,
  87                 .min            = 0,
  88                 .max            = 65534,
  89         }, {
  90                 .gaintime       = TSL2563_TIMING_400MS | TSL2563_TIMING_GAIN1,
  91                 .min            = 2048,
  92                 .max            = 65534,
  93         }, {
  94                 .gaintime       = TSL2563_TIMING_100MS | TSL2563_TIMING_GAIN1,
  95                 .min            = 4095,
  96                 .max            = 37177,
  97         }, {
  98                 .gaintime       = TSL2563_TIMING_13MS | TSL2563_TIMING_GAIN1,
  99                 .min            = 3000,
 100                 .max            = 65535,
 101         },
 102 };
 103
 104 struct tsl2563_chip {
 105         struct mutex            lock;
 106         struct i2c_client       *client;
 107         struct delayed_work     poweroff_work;
 108
 109         /* Remember state for suspend and resume functions */
 110         bool suspended;
 111
 112         struct tsl2563_gainlevel_coeff const *gainlevel;
 113
 114         u16                     low_thres;
 115         u16                     high_thres;
 116         u8                      intr;
 117         bool                    int_enabled;
 118
 119         /* Calibration coefficients */
 120         u32                     calib0;
 121         u32                     calib1;
 122         int                     cover_comp_gain;
 123
 124         /* Cache current values, to be returned while suspended */
 125         u32                     data0;
 126         u32                     data1;
 127 };
 128
 129 static int tsl2563_set_power(struct tsl2563_chip *chip, int on)
 130 {
 131         struct i2c_client *client = chip->client;
 132         u8 cmd;
 133
 134         cmd = on ? TSL2563_CMD_POWER_ON : TSL2563_CMD_POWER_OFF;
 135         return i2c_smbus_write_byte_data(client,
 136                                          TSL2563_CMD | TSL2563_REG_CTRL, cmd);
 137 }
 138
 139 /*
 140  * Return value is 0 for off, 1 for on, or a negative error
 141  * code if reading failed.
 142  */
 143 static int tsl2563_get_power(struct tsl2563_chip *chip)
 144 {
 145         struct i2c_client *client = chip->client;
 146         int ret;
 147
 148         ret = i2c_smbus_read_byte_data(client, TSL2563_CMD | TSL2563_REG_CTRL);
 149         if (ret < 0)
 150                 return ret;
 151
 152         return (ret & TSL2563_CTRL_POWER_MASK) == TSL2563_CMD_POWER_ON;
 153 }
 154
 155 static int tsl2563_configure(struct tsl2563_chip *chip)
 156 {
 157         int ret;
 158
 159         ret = i2c_smbus_write_byte_data(chip->client,
 160                         TSL2563_CMD | TSL2563_REG_TIMING,
 161                         chip->gainlevel->gaintime);
 162         if (ret)
 163                 goto error_ret;
 164         ret = i2c_smbus_write_byte_data(chip->client,
 165                         TSL2563_CMD | TSL2563_REG_HIGHLOW,
 166                         chip->high_thres & 0xFF);
 167         if (ret)
 168                 goto error_ret;
 169         ret = i2c_smbus_write_byte_data(chip->client,
 170                         TSL2563_CMD | TSL2563_REG_HIGHHIGH,
 171                         (chip->high_thres >> 8) & 0xFF);
 172         if (ret)
 173                 goto error_ret;
 174         ret = i2c_smbus_write_byte_data(chip->client,
 175                         TSL2563_CMD | TSL2563_REG_LOWLOW,
 176                         chip->low_thres & 0xFF);
 177         if (ret)
 178                 goto error_ret;
 179         ret = i2c_smbus_write_byte_data(chip->client,
 180                         TSL2563_CMD | TSL2563_REG_LOWHIGH,
 181                         (chip->low_thres >> 8) & 0xFF);
 182 /*
 183  * Interrupt register is automatically written anyway if it is relevant
 184  * so is not here.
 185  */
 186 error_ret:
 187         return ret;
 188 }
 189
 190 static void tsl2563_poweroff_work(struct work_struct *work)
 191 {
 192         struct tsl2563_chip *chip =
 193                 container_of(work, struct tsl2563_chip, poweroff_work.work);
 194         tsl2563_set_power(chip, 0);
 195 }
 196
 197 static int tsl2563_detect(struct tsl2563_chip *chip)
 198 {
 199         int ret;
 200
 201         ret = tsl2563_set_power(chip, 1);
 202         if (ret)
 203                 return ret;
 204
 205         ret = tsl2563_get_power(chip);
 206         if (ret < 0)
 207                 return ret;
 208
 209         return ret ? 0 : -ENODEV;
 210 }
 211
 212 static int tsl2563_read_id(struct tsl2563_chip *chip, u8 *id)
 213 {
 214         struct i2c_client *client = chip->client;
 215         int ret;
 216
 217         ret = i2c_smbus_read_byte_data(client, TSL2563_CMD | TSL2563_REG_ID);
 218         if (ret < 0)
 219                 return ret;
 220
 221         *id = ret;
 222
 223         return 0;
 224 }
 225
 226 /*
 227  * "Normalized" ADC value is one obtained with 400ms of integration time and
 228  * 16x gain. This function returns the number of bits of shift needed to
 229  * convert between normalized values and HW values obtained using given
 230  * timing and gain settings.
 231  */
 232 static int tsl2563_adc_shiftbits(u8 timing)
 233 {
 234         int shift = 0;
 235
 236         switch (timing & TSL2563_TIMING_MASK) {
 237         case TSL2563_TIMING_13MS:
 238                 shift += 5;
 239                 break;
 240         case TSL2563_TIMING_100MS:
 241                 shift += 2;
 242                 break;
 243         case TSL2563_TIMING_400MS:
 244                 /* no-op */
 245                 break;
 246         }
 247
 248         if (!(timing & TSL2563_TIMING_GAIN16))
 249                 shift += 4;
 250
 251         return shift;
 252 }
 253
 254 /* Convert a HW ADC value to normalized scale. */
 255 static u32 tsl2563_normalize_adc(u16 adc, u8 timing)
 256 {
 257         return adc << tsl2563_adc_shiftbits(timing);
 258 }
 259
 260 static void tsl2563_wait_adc(struct tsl2563_chip *chip)
 261 {
 262         unsigned int delay;
 263
 264         switch (chip->gainlevel->gaintime & TSL2563_TIMING_MASK) {
 265         case TSL2563_TIMING_13MS:
 266                 delay = 14;
 267                 break;
 268         case TSL2563_TIMING_100MS:
 269                 delay = 101;
 270                 break;
 271         default:
 272                 delay = 402;
 273         }
 274         /*
 275          * TODO: Make sure that we wait at least required delay but why we
 276          * have to extend it one tick more?
 277          */
 278         schedule_timeout_interruptible(msecs_to_jiffies(delay) + 2);
 279 }
 280
 281 static int tsl2563_adjust_gainlevel(struct tsl2563_chip *chip, u16 adc)
 282 {
 283         struct i2c_client *client = chip->client;
 284
 285         if (adc > chip->gainlevel->max || adc < chip->gainlevel->min) {
 286
 287                 (adc > chip->gainlevel->max) ?
 288                         chip->gainlevel++ : chip->gainlevel--;
 289
 290                 i2c_smbus_write_byte_data(client,
 291                                           TSL2563_CMD | TSL2563_REG_TIMING,
 292                                           chip->gainlevel->gaintime);
 293
 294                 tsl2563_wait_adc(chip);
 295                 tsl2563_wait_adc(chip);
 296
 297                 return 1;
 298         } else
 299                 return 0;
 300 }
 301
 302 static int tsl2563_get_adc(struct tsl2563_chip *chip)
 303 {
 304         struct i2c_client *client = chip->client;
 305         u16 adc0, adc1;
 306         int retry = 1;
 307         int ret = 0;
 308
 309         if (chip->suspended)
 310                 goto out;
 311
 312         if (!chip->int_enabled) {
 313                 cancel_delayed_work(&chip->poweroff_work);
 314
 315                 if (!tsl2563_get_power(chip)) {
 316                         ret = tsl2563_set_power(chip, 1);
 317                         if (ret)
 318                                 goto out;
 319                         ret = tsl2563_configure(chip);
 320                         if (ret)
 321                                 goto out;
 322                         tsl2563_wait_adc(chip);
 323                 }
 324         }
 325
 326         while (retry) {
 327                 ret = i2c_smbus_read_word_data(client,
 328                                 TSL2563_CMD | TSL2563_REG_DATA0LOW);
 329                 if (ret < 0)
 330                         goto out;
 331                 adc0 = ret;
 332
 333                 ret = i2c_smbus_read_word_data(client,
 334                                 TSL2563_CMD | TSL2563_REG_DATA1LOW);
 335                 if (ret < 0)
 336                         goto out;
 337                 adc1 = ret;
 338
 339                 retry = tsl2563_adjust_gainlevel(chip, adc0);
 340         }
 341
 342         chip->data0 = tsl2563_normalize_adc(adc0, chip->gainlevel->gaintime);
 343         chip->data1 = tsl2563_normalize_adc(adc1, chip->gainlevel->gaintime);
 344
 345         if (!chip->int_enabled)
 346                 schedule_delayed_work(&chip->poweroff_work, 5 * HZ);
 347
 348         ret = 0;
 349 out:
 350         return ret;
 351 }
 352
 353 static inline int tsl2563_calib_to_sysfs(u32 calib)
 354 {
 355         return (int) (((calib * CALIB_BASE_SYSFS) +
 356                        CALIB_FRAC_HALF) >> CALIB_FRAC_BITS);
 357 }
 358
 359 static inline u32 tsl2563_calib_from_sysfs(int value)
 360 {
 361         return (((u32) value) << CALIB_FRAC_BITS) / CALIB_BASE_SYSFS;
 362 }
 363
 364 /*
 365  * Conversions between lux and ADC values.
 366  *
 367  * The basic formula is lux = c0 * adc0 - c1 * adc1, where c0 and c1 are
 368  * appropriate constants. Different constants are needed for different
 369  * kinds of light, determined by the ratio adc1/adc0 (basically the ratio
 370  * of the intensities in infrared and visible wavelengths). lux_table below
 371  * lists the upper threshold of the adc1/adc0 ratio and the corresponding
 372  * constants.
 373  */
 374
 375 struct tsl2563_lux_coeff {
 376         unsigned long ch_ratio;
 377         unsigned long ch0_coeff;
 378         unsigned long ch1_coeff;
 379 };
 380
 381 static const struct tsl2563_lux_coeff lux_table[] = {
 382         {
 383                 .ch_ratio       = FRAC10K(1300),
 384                 .ch0_coeff      = FRAC10K(315),
 385                 .ch1_coeff      = FRAC10K(262),
 386         }, {
 387                 .ch_ratio       = FRAC10K(2600),
 388                 .ch0_coeff      = FRAC10K(337),
 389                 .ch1_coeff      = FRAC10K(430),
 390         }, {
 391                 .ch_ratio       = FRAC10K(3900),
 392                 .ch0_coeff      = FRAC10K(363),
 393                 .ch1_coeff      = FRAC10K(529),
 394         }, {
 395                 .ch_ratio       = FRAC10K(5200),
 396                 .ch0_coeff      = FRAC10K(392),
 397                 .ch1_coeff      = FRAC10K(605),
 398         }, {
 399                 .ch_ratio       = FRAC10K(6500),
 400                 .ch0_coeff      = FRAC10K(229),
 401                 .ch1_coeff      = FRAC10K(291),
 402         }, {
 403                 .ch_ratio       = FRAC10K(8000),
 404                 .ch0_coeff      = FRAC10K(157),
 405                 .ch1_coeff      = FRAC10K(180),
 406         }, {
 407                 .ch_ratio       = FRAC10K(13000),
 408                 .ch0_coeff      = FRAC10K(34),
 409                 .ch1_coeff      = FRAC10K(26),
 410         }, {
 411                 .ch_ratio       = ULONG_MAX,
 412                 .ch0_coeff      = 0,
 413                 .ch1_coeff      = 0,
 414         },
 415 };
 416
 417 /* Convert normalized, scaled ADC values to lux. */
 418 static unsigned int tsl2563_adc_to_lux(u32 adc0, u32 adc1)
 419 {
 420         const struct tsl2563_lux_coeff *lp = lux_table;
 421         unsigned long ratio, lux, ch0 = adc0, ch1 = adc1;
 422
 423         ratio = ch0 ? ((ch1 << ADC_FRAC_BITS) / ch0) : ULONG_MAX;
 424
 425         while (lp->ch_ratio < ratio)
 426                 lp++;
 427
 428         lux = ch0 * lp->ch0_coeff - ch1 * lp->ch1_coeff;
 429
 430         return (unsigned int) (lux >> ADC_FRAC_BITS);
 431 }
 432
 433 /* Apply calibration coefficient to ADC count. */
 434 static u32 tsl2563_calib_adc(u32 adc, u32 calib)
 435 {
 436         unsigned long scaled = adc;
 437
 438         scaled *= calib;
 439         scaled >>= CALIB_FRAC_BITS;
 440
 441         return (u32) scaled;
 442 }
 443
 444 static int tsl2563_write_raw(struct iio_dev *indio_dev,
 445                                struct iio_chan_spec const *chan,
 446                                int val,
 447                                int val2,
 448                                long mask)
 449 {
 450         struct tsl2563_chip *chip = iio_priv(indio_dev);
 451
 452         if (mask != IIO_CHAN_INFO_CALIBSCALE)
 453                 return -EINVAL;
 454         if (chan->channel2 == IIO_MOD_LIGHT_BOTH)
 455                 chip->calib0 = tsl2563_calib_from_sysfs(val);
 456         else if (chan->channel2 == IIO_MOD_LIGHT_IR)
 457                 chip->calib1 = tsl2563_calib_from_sysfs(val);
 458         else
 459                 return -EINVAL;
 460
 461         return 0;
 462 }
 463
 464 static int tsl2563_read_raw(struct iio_dev *indio_dev,
 465                             struct iio_chan_spec const *chan,
 466                             int *val,
 467                             int *val2,
 468                             long mask)
 469 {
 470         int ret = -EINVAL;
 471         u32 calib0, calib1;
 472         struct tsl2563_chip *chip = iio_priv(indio_dev);
 473
 474         mutex_lock(&chip->lock);
 475         switch (mask) {
 476         case IIO_CHAN_INFO_RAW:
 477         case IIO_CHAN_INFO_PROCESSED:
 478                 switch (chan->type) {
 479                 case IIO_LIGHT:
 480                         ret = tsl2563_get_adc(chip);
 481                         if (ret)
 482                                 goto error_ret;
 483                         calib0 = tsl2563_calib_adc(chip->data0, chip->calib0) *
 484                                 chip->cover_comp_gain;
 485                         calib1 = tsl2563_calib_adc(chip->data1, chip->calib1) *
 486                                 chip->cover_comp_gain;
 487                         *val = tsl2563_adc_to_lux(calib0, calib1);
 488                         ret = IIO_VAL_INT;
 489                         break;
 490                 case IIO_INTENSITY:
 491                         ret = tsl2563_get_adc(chip);
 492                         if (ret)
 493                                 goto error_ret;
 494                         if (chan->channel2 == IIO_MOD_LIGHT_BOTH)
 495                                 *val = chip->data0;
 496                         else
 497                                 *val = chip->data1;
 498                         ret = IIO_VAL_INT;
 499                         break;
 500                 default:
 501                         break;
 502                 }
 503                 break;
 504
 505         case IIO_CHAN_INFO_CALIBSCALE:
 506                 if (chan->channel2 == IIO_MOD_LIGHT_BOTH)
 507                         *val = tsl2563_calib_to_sysfs(chip->calib0);
 508                 else
 509                         *val = tsl2563_calib_to_sysfs(chip->calib1);
 510                 ret = IIO_VAL_INT;
 511                 break;
 512         default:
 513                 ret = -EINVAL;
 514                 goto error_ret;
 515         }
 516
 517 error_ret:
 518         mutex_unlock(&chip->lock);
 519         return ret;
 520 }
 521
 522 static const struct iio_event_spec tsl2563_events[] = {
 523         {
 524                 .type = IIO_EV_TYPE_THRESH,
 525                 .dir = IIO_EV_DIR_RISING,
 526                 .mask_separate = BIT(IIO_EV_INFO_VALUE) |
 527                                 BIT(IIO_EV_INFO_ENABLE),
 528         }, {
 529                 .type = IIO_EV_TYPE_THRESH,
 530                 .dir = IIO_EV_DIR_FALLING,
 531                 .mask_separate = BIT(IIO_EV_INFO_VALUE) |
 532                                 BIT(IIO_EV_INFO_ENABLE),
 533         },
 534 };
 535
 536 static const struct iio_chan_spec tsl2563_channels[] = {
 537         {
 538                 .type = IIO_LIGHT,
 539                 .indexed = 1,
 540                 .info_mask_separate = BIT(IIO_CHAN_INFO_PROCESSED),
 541                 .channel = 0,
 542         }, {
 543                 .type = IIO_INTENSITY,
 544                 .modified = 1,
 545                 .channel2 = IIO_MOD_LIGHT_BOTH,
 546                 .info_mask_separate = BIT(IIO_CHAN_INFO_RAW) |
 547                 BIT(IIO_CHAN_INFO_CALIBSCALE),
 548                 .event_spec = tsl2563_events,
 549                 .num_event_specs = ARRAY_SIZE(tsl2563_events),
 550         }, {
 551                 .type = IIO_INTENSITY,
 552                 .modified = 1,
 553                 .channel2 = IIO_MOD_LIGHT_IR,
 554                 .info_mask_separate = BIT(IIO_CHAN_INFO_RAW) |
 555                 BIT(IIO_CHAN_INFO_CALIBSCALE),
 556         }
 557 };
 558
 559 static int tsl2563_read_thresh(struct iio_dev *indio_dev,
 560         const struct iio_chan_spec *chan, enum iio_event_type type,
 561         enum iio_event_direction dir, enum iio_event_info info, int *val,
 562         int *val2)
 563 {
 564         struct tsl2563_chip *chip = iio_priv(indio_dev);
 565
 566         switch (dir) {
 567         case IIO_EV_DIR_RISING:
 568                 *val = chip->high_thres;
 569                 break;
 570         case IIO_EV_DIR_FALLING:
 571                 *val = chip->low_thres;
 572                 break;
 573         default:
 574                 return -EINVAL;
 575         }
 576
 577         return IIO_VAL_INT;
 578 }
 579
 580 static int tsl2563_write_thresh(struct iio_dev *indio_dev,
 581         const struct iio_chan_spec *chan, enum iio_event_type type,
 582         enum iio_event_direction dir, enum iio_event_info info, int val,
 583         int val2)
 584 {
 585         struct tsl2563_chip *chip = iio_priv(indio_dev);
 586         int ret;
 587         u8 address;
 588
 589         if (dir == IIO_EV_DIR_RISING)
 590                 address = TSL2563_REG_HIGHLOW;
 591         else
 592                 address = TSL2563_REG_LOWLOW;
 593         mutex_lock(&chip->lock);
 594         ret = i2c_smbus_write_byte_data(chip->client, TSL2563_CMD | address,
 595                                         val & 0xFF);
 596         if (ret)
 597                 goto error_ret;
 598         ret = i2c_smbus_write_byte_data(chip->client,
 599                                         TSL2563_CMD | (address + 1),
 600                                         (val >> 8) & 0xFF);
 601         if (dir == IIO_EV_DIR_RISING)
 602                 chip->high_thres = val;
 603         else
 604                 chip->low_thres = val;
 605
 606 error_ret:
 607         mutex_unlock(&chip->lock);
 608
 609         return ret;
 610 }
 611
 612 static irqreturn_t tsl2563_event_handler(int irq, void *private)
 613 {
 614         struct iio_dev *dev_info = private;
 615         struct tsl2563_chip *chip = iio_priv(dev_info);
 616
 617         iio_push_event(dev_info,
 618                        IIO_UNMOD_EVENT_CODE(IIO_INTENSITY,
 619                                             0,
 620                                             IIO_EV_TYPE_THRESH,
 621                                             IIO_EV_DIR_EITHER),
 622                        iio_get_time_ns(dev_info));
 623
 624         /* clear the interrupt and push the event */
 625         i2c_smbus_write_byte(chip->client, TSL2563_CMD | TSL2563_CLEARINT);
 626         return IRQ_HANDLED;
 627 }
 628
 629 static int tsl2563_write_interrupt_config(struct iio_dev *indio_dev,
 630         const struct iio_chan_spec *chan, enum iio_event_type type,
 631         enum iio_event_direction dir, int state)
 632 {
 633         struct tsl2563_chip *chip = iio_priv(indio_dev);
 634         int ret = 0;
 635
 636         mutex_lock(&chip->lock);
 637         if (state && !(chip->intr & 0x30)) {
 638                 chip->intr &= ~0x30;
 639                 chip->intr |= 0x10;
 640                 /* ensure the chip is actually on */
 641                 cancel_delayed_work(&chip->poweroff_work);
 642                 if (!tsl2563_get_power(chip)) {
 643                         ret = tsl2563_set_power(chip, 1);
 644                         if (ret)
 645                                 goto out;
 646                         ret = tsl2563_configure(chip);
 647                         if (ret)
 648                                 goto out;
 649                 }
 650                 ret = i2c_smbus_write_byte_data(chip->client,
 651                                                 TSL2563_CMD | TSL2563_REG_INT,
 652                                                 chip->intr);
 653                 chip->int_enabled = true;
 654         }
 655
 656         if (!state && (chip->intr & 0x30)) {
 657                 chip->intr &= ~0x30;
 658                 ret = i2c_smbus_write_byte_data(chip->client,
 659                                                 TSL2563_CMD | TSL2563_REG_INT,
 660                                                 chip->intr);
 661                 chip->int_enabled = false;
 662                 /* now the interrupt is not enabled, we can go to sleep */
 663                 schedule_delayed_work(&chip->poweroff_work, 5 * HZ);
 664         }
 665 out:
 666         mutex_unlock(&chip->lock);
 667
 668         return ret;
 669 }
 670
 671 static int tsl2563_read_interrupt_config(struct iio_dev *indio_dev,
 672         const struct iio_chan_spec *chan, enum iio_event_type type,
 673         enum iio_event_direction dir)
 674 {
 675         struct tsl2563_chip *chip = iio_priv(indio_dev);
 676         int ret;
 677
 678         mutex_lock(&chip->lock);
 679         ret = i2c_smbus_read_byte_data(chip->client,
 680                                        TSL2563_CMD | TSL2563_REG_INT);
 681         mutex_unlock(&chip->lock);
 682         if (ret < 0)
 683                 return ret;
 684
 685         return !!(ret & 0x30);
 686 }
 687
 688 static const struct iio_info tsl2563_info_no_irq = {
 689         .read_raw = &tsl2563_read_raw,
 690         .write_raw = &tsl2563_write_raw,
 691 };
 692
 693 static const struct iio_info tsl2563_info = {
 694         .read_raw = &tsl2563_read_raw,
 695         .write_raw = &tsl2563_write_raw,
 696         .read_event_value = &tsl2563_read_thresh,
 697         .write_event_value = &tsl2563_write_thresh,
 698         .read_event_config = &tsl2563_read_interrupt_config,
 699         .write_event_config = &tsl2563_write_interrupt_config,
 700 };
 701
 702 static int tsl2563_probe(struct i2c_client *client,
 703                                 const struct i2c_device_id *device_id)
 704 {
 705         struct iio_dev *indio_dev;
 706         struct tsl2563_chip *chip;
 707         struct tsl2563_platform_data *pdata = client->dev.platform_data;
 708         int err = 0;
 709         u8 id = 0;
 710
 711         indio_dev = devm_iio_device_alloc(&client->dev, sizeof(*chip));
 712         if (!indio_dev)
 713                 return -ENOMEM;
 714
 715         chip = iio_priv(indio_dev);
 716
 717         i2c_set_clientdata(client, indio_dev);
 718         chip->client = client;
 719
 720         err = tsl2563_detect(chip);
 721         if (err) {
 722                 dev_err(&client->dev, "detect error %d\n", -err);
 723                 return err;
 724         }
 725
 726         err = tsl2563_read_id(chip, &id);
 727         if (err) {
 728                 dev_err(&client->dev, "read id error %d\n", -err);
 729                 return err;
 730         }
 731
 732         mutex_init(&chip->lock);
 733
 734         /* Default values used until userspace says otherwise */
 735         chip->low_thres = 0x0;
 736         chip->high_thres = 0xffff;
 737         chip->gainlevel = tsl2563_gainlevel_table;
 738         chip->intr = TSL2563_INT_PERSIST(4);
 739         chip->calib0 = tsl2563_calib_from_sysfs(CALIB_BASE_SYSFS);
 740         chip->calib1 = tsl2563_calib_from_sysfs(CALIB_BASE_SYSFS);
 741
 742         if (pdata) {
 743                 chip->cover_comp_gain = pdata->cover_comp_gain;
 744         } else {
 745                 err = device_property_read_u32(&client->dev, "amstaos,cover-comp-gain",
 746                                                &chip->cover_comp_gain);
 747                 if (err)
 748                         chip->cover_comp_gain = 1;
 749         }
 750
 751         dev_info(&client->dev, "model %d, rev. %d\n", id >> 4, id & 0x0f);
 752         indio_dev->name = client->name;
 753         indio_dev->channels = tsl2563_channels;
 754         indio_dev->num_channels = ARRAY_SIZE(tsl2563_channels);
 755         indio_dev->modes = INDIO_DIRECT_MODE;
 756
 757         if (client->irq)
 758                 indio_dev->info = &tsl2563_info;
 759         else
 760                 indio_dev->info = &tsl2563_info_no_irq;
 761
 762         if (client->irq) {
 763                 err = devm_request_threaded_irq(&client->dev, client->irq,
 764                                            NULL,
 765                                            &tsl2563_event_handler,
 766                                            IRQF_TRIGGER_RISING | IRQF_ONESHOT,
 767                                            "tsl2563_event",
 768                                            indio_dev);
 769                 if (err) {
 770                         dev_err(&client->dev, "irq request error %d\n", -err);
 771                         return err;
 772                 }
 773         }
 774
 775         err = tsl2563_configure(chip);
 776         if (err) {
 777                 dev_err(&client->dev, "configure error %d\n", -err);
 778                 return err;
 779         }
 780
 781         INIT_DELAYED_WORK(&chip->poweroff_work, tsl2563_poweroff_work);
 782
 783         /* The interrupt cannot yet be enabled so this is fine without lock */
 784         schedule_delayed_work(&chip->poweroff_work, 5 * HZ);
 785
 786         err = iio_device_register(indio_dev);
 787         if (err) {
 788                 dev_err(&client->dev, "iio registration error %d\n", -err);
 789                 goto fail;
 790         }
 791
 792         return 0;
 793
 794 fail:
 795         cancel_delayed_work_sync(&chip->poweroff_work);
 796         return err;
 797 }
 798
 799 static int tsl2563_remove(struct i2c_client *client)
 800 {
 801         struct iio_dev *indio_dev = i2c_get_clientdata(client);
 802         struct tsl2563_chip *chip = iio_priv(indio_dev);
 803
 804         iio_device_unregister(indio_dev);
 805         if (!chip->int_enabled)
 806                 cancel_delayed_work(&chip->poweroff_work);
 807         /* Ensure that interrupts are disabled - then flush any bottom halves */
 808         chip->intr &= ~0x30;
 809         i2c_smbus_write_byte_data(chip->client, TSL2563_CMD | TSL2563_REG_INT,
 810                                   chip->intr);
 811         flush_scheduled_work();
 812         tsl2563_set_power(chip, 0);
 813
 814         return 0;
 815 }
 816
 817 #ifdef CONFIG_PM_SLEEP
 818 static int tsl2563_suspend(struct device *dev)
 819 {
 820         struct iio_dev *indio_dev = i2c_get_clientdata(to_i2c_client(dev));
 821         struct tsl2563_chip *chip = iio_priv(indio_dev);
 822         int ret;
 823
 824         mutex_lock(&chip->lock);
 825
 826         ret = tsl2563_set_power(chip, 0);
 827         if (ret)
 828                 goto out;
 829
 830         chip->suspended = true;
 831
 832 out:
 833         mutex_unlock(&chip->lock);
 834         return ret;
 835 }
 836
 837 static int tsl2563_resume(struct device *dev)
 838 {
 839         struct iio_dev *indio_dev = i2c_get_clientdata(to_i2c_client(dev));
 840         struct tsl2563_chip *chip = iio_priv(indio_dev);
 841         int ret;
 842
 843         mutex_lock(&chip->lock);
 844
 845         ret = tsl2563_set_power(chip, 1);
 846         if (ret)
 847                 goto out;
 848
 849         ret = tsl2563_configure(chip);
 850         if (ret)
 851                 goto out;
 852
 853         chip->suspended = false;
 854
 855 out:
 856         mutex_unlock(&chip->lock);
 857         return ret;
 858 }
 859
 860 static SIMPLE_DEV_PM_OPS(tsl2563_pm_ops, tsl2563_suspend, tsl2563_resume);
 861 #define TSL2563_PM_OPS (&tsl2563_pm_ops)
 862 #else
 863 #define TSL2563_PM_OPS NULL
 864 #endif
 865
 866 static const struct i2c_device_id tsl2563_id[] = {
 867         { "tsl2560", 0 },
 868         { "tsl2561", 1 },
 869         { "tsl2562", 2 },
 870         { "tsl2563", 3 },
 871         {}
 872 };
 873 MODULE_DEVICE_TABLE(i2c, tsl2563_id);
 874
 875 static const struct of_device_id tsl2563_of_match[] = {
 876         { .compatible = "amstaos,tsl2560" },
 877         { .compatible = "amstaos,tsl2561" },
 878         { .compatible = "amstaos,tsl2562" },
 879         { .compatible = "amstaos,tsl2563" },
 880         {}
 881 };
 882 MODULE_DEVICE_TABLE(of, tsl2563_of_match);
 883
 884 static struct i2c_driver tsl2563_i2c_driver = {
 885         .driver = {
 886                 .name    = "tsl2563",
 887                 .of_match_table = tsl2563_of_match,
 888                 .pm     = TSL2563_PM_OPS,
 889         },
 890         .probe          = tsl2563_probe,
 891         .remove         = tsl2563_remove,
 892         .id_table       = tsl2563_id,
 893 };
 894 module_i2c_driver(tsl2563_i2c_driver);
 895
 896 MODULE_AUTHOR("Nokia Corporation");
 897 MODULE_DESCRIPTION("tsl2563 light sensor driver");
 898 MODULE_LICENSE("GPL");