drivers/i2c/busses/i2c-designware-slave.c

   1 // SPDX-License-Identifier: GPL-2.0
   2 /*
   3  * Synopsys DesignWare I2C adapter driver (slave only).
   4  *
   5  * Based on the Synopsys DesignWare I2C adapter driver (master).
   6  *
   7  * Copyright (C) 2016 Synopsys Inc.
   8  */
   9 #include <linux/delay.h>
  10 #include <linux/err.h>
  11 #include <linux/errno.h>
  12 #include <linux/i2c.h>
  13 #include <linux/interrupt.h>
  14 #include <linux/io.h>
  15 #include <linux/module.h>
  16 #include <linux/pm_runtime.h>
  17
  18 #include "i2c-designware-core.h"
  19
  20 static void i2c_dw_configure_fifo_slave(struct dw_i2c_dev *dev)
  21 {
  22         /* Configure Tx/Rx FIFO threshold levels. */
  23         dw_writel(dev, 0, DW_IC_TX_TL);
  24         dw_writel(dev, 0, DW_IC_RX_TL);
  25
  26         /* Configure the I2C slave. */
  27         dw_writel(dev, dev->slave_cfg, DW_IC_CON);
  28         dw_writel(dev, DW_IC_INTR_SLAVE_MASK, DW_IC_INTR_MASK);
  29 }
  30
  31 /**
  32  * i2c_dw_init_slave() - Initialize the designware i2c slave hardware
  33  * @dev: device private data
  34  *
  35  * This function configures and enables the I2C in slave mode.
  36  * This function is called during I2C init function, and in case of timeout at
  37  * run time.
  38  */
  39 static int i2c_dw_init_slave(struct dw_i2c_dev *dev)
  40 {
  41         int ret;
  42
  43         ret = i2c_dw_acquire_lock(dev);
  44         if (ret)
  45                 return ret;
  46
  47         /* Disable the adapter. */
  48         __i2c_dw_disable(dev);
  49
  50         /* Write SDA hold time if supported */
  51         if (dev->sda_hold_time)
  52                 dw_writel(dev, dev->sda_hold_time, DW_IC_SDA_HOLD);
  53
  54         i2c_dw_configure_fifo_slave(dev);
  55         i2c_dw_release_lock(dev);
  56
  57         return 0;
  58 }
  59
  60 static int i2c_dw_reg_slave(struct i2c_client *slave)
  61 {
  62         struct dw_i2c_dev *dev = i2c_get_adapdata(slave->adapter);
  63
  64         if (dev->slave)
  65                 return -EBUSY;
  66         if (slave->flags & I2C_CLIENT_TEN)
  67                 return -EAFNOSUPPORT;
  68         pm_runtime_get_sync(dev->dev);
  69
  70         /*
  71          * Set slave address in the IC_SAR register,
  72          * the address to which the DW_apb_i2c responds.
  73          */
  74         __i2c_dw_disable_nowait(dev);
  75         dw_writel(dev, slave->addr, DW_IC_SAR);
  76         dev->slave = slave;
  77
  78         __i2c_dw_enable(dev);
  79
  80         dev->cmd_err = 0;
  81         dev->msg_write_idx = 0;
  82         dev->msg_read_idx = 0;
  83         dev->msg_err = 0;
  84         dev->status = STATUS_IDLE;
  85         dev->abort_source = 0;
  86         dev->rx_outstanding = 0;
  87
  88         return 0;
  89 }
  90
  91 static int i2c_dw_unreg_slave(struct i2c_client *slave)
  92 {
  93         struct dw_i2c_dev *dev = i2c_get_adapdata(slave->adapter);
  94
  95         dev->disable_int(dev);
  96         dev->disable(dev);
  97         dev->slave = NULL;
  98         pm_runtime_put(dev->dev);
  99
 100         return 0;
 101 }
 102
 103 static u32 i2c_dw_read_clear_intrbits_slave(struct dw_i2c_dev *dev)
 104 {
 105         u32 stat;
 106
 107         /*
 108          * The IC_INTR_STAT register just indicates "enabled" interrupts.
 109          * Ths unmasked raw version of interrupt status bits are available
 110          * in the IC_RAW_INTR_STAT register.
 111          *
 112          * That is,
 113          *   stat = dw_readl(IC_INTR_STAT);
 114          * equals to,
 115          *   stat = dw_readl(IC_RAW_INTR_STAT) & dw_readl(IC_INTR_MASK);
 116          *
 117          * The raw version might be useful for debugging purposes.
 118          */
 119         stat = dw_readl(dev, DW_IC_INTR_STAT);
 120
 121         /*
 122          * Do not use the IC_CLR_INTR register to clear interrupts, or
 123          * you'll miss some interrupts, triggered during the period from
 124          * dw_readl(IC_INTR_STAT) to dw_readl(IC_CLR_INTR).
 125          *
 126          * Instead, use the separately-prepared IC_CLR_* registers.
 127          */
 128         if (stat & DW_IC_INTR_TX_ABRT)
 129                 dw_readl(dev, DW_IC_CLR_TX_ABRT);
 130         if (stat & DW_IC_INTR_RX_UNDER)
 131                 dw_readl(dev, DW_IC_CLR_RX_UNDER);
 132         if (stat & DW_IC_INTR_RX_OVER)
 133                 dw_readl(dev, DW_IC_CLR_RX_OVER);
 134         if (stat & DW_IC_INTR_TX_OVER)
 135                 dw_readl(dev, DW_IC_CLR_TX_OVER);
 136         if (stat & DW_IC_INTR_RX_DONE)
 137                 dw_readl(dev, DW_IC_CLR_RX_DONE);
 138         if (stat & DW_IC_INTR_ACTIVITY)
 139                 dw_readl(dev, DW_IC_CLR_ACTIVITY);
 140         if (stat & DW_IC_INTR_STOP_DET)
 141                 dw_readl(dev, DW_IC_CLR_STOP_DET);
 142         if (stat & DW_IC_INTR_START_DET)
 143                 dw_readl(dev, DW_IC_CLR_START_DET);
 144         if (stat & DW_IC_INTR_GEN_CALL)
 145                 dw_readl(dev, DW_IC_CLR_GEN_CALL);
 146
 147         return stat;
 148 }
 149
 150 /*
 151  * Interrupt service routine. This gets called whenever an I2C slave interrupt
 152  * occurs.
 153  */
 154
 155 static int i2c_dw_irq_handler_slave(struct dw_i2c_dev *dev)
 156 {
 157         u32 raw_stat, stat, enabled;
 158         u8 val, slave_activity;
 159
 160         stat = dw_readl(dev, DW_IC_INTR_STAT);
 161         enabled = dw_readl(dev, DW_IC_ENABLE);
 162         raw_stat = dw_readl(dev, DW_IC_RAW_INTR_STAT);
 163         slave_activity = ((dw_readl(dev, DW_IC_STATUS) &
 164                 DW_IC_STATUS_SLAVE_ACTIVITY) >> 6);
 165
 166         if (!enabled || !(raw_stat & ~DW_IC_INTR_ACTIVITY) || !dev->slave)
 167                 return 0;
 168
 169         dev_dbg(dev->dev,
 170                 "%#x STATUS SLAVE_ACTIVITY=%#x : RAW_INTR_STAT=%#x : INTR_STAT=%#x\n",
 171                 enabled, slave_activity, raw_stat, stat);
 172
 173         if ((stat & DW_IC_INTR_RX_FULL) && (stat & DW_IC_INTR_STOP_DET))
 174                 i2c_slave_event(dev->slave, I2C_SLAVE_WRITE_REQUESTED, &val);
 175
 176         if (stat & DW_IC_INTR_RD_REQ) {
 177                 if (slave_activity) {
 178                         if (stat & DW_IC_INTR_RX_FULL) {
 179                                 val = dw_readl(dev, DW_IC_DATA_CMD);
 180
 181                                 if (!i2c_slave_event(dev->slave,
 182                                                      I2C_SLAVE_WRITE_RECEIVED,
 183                                                      &val)) {
 184                                         dev_vdbg(dev->dev, "Byte %X acked!",
 185                                                  val);
 186                                 }
 187                                 dw_readl(dev, DW_IC_CLR_RD_REQ);
 188                                 stat = i2c_dw_read_clear_intrbits_slave(dev);
 189                         } else {
 190                                 dw_readl(dev, DW_IC_CLR_RD_REQ);
 191                                 dw_readl(dev, DW_IC_CLR_RX_UNDER);
 192                                 stat = i2c_dw_read_clear_intrbits_slave(dev);
 193                         }
 194                         if (!i2c_slave_event(dev->slave,
 195                                              I2C_SLAVE_READ_REQUESTED,
 196                                              &val))
 197                                 dw_writel(dev, val, DW_IC_DATA_CMD);
 198                 }
 199         }
 200
 201         if (stat & DW_IC_INTR_RX_DONE) {
 202                 if (!i2c_slave_event(dev->slave, I2C_SLAVE_READ_PROCESSED,
 203                                      &val))
 204                         dw_readl(dev, DW_IC_CLR_RX_DONE);
 205
 206                 i2c_slave_event(dev->slave, I2C_SLAVE_STOP, &val);
 207                 stat = i2c_dw_read_clear_intrbits_slave(dev);
 208                 return 1;
 209         }
 210
 211         if (stat & DW_IC_INTR_RX_FULL) {
 212                 val = dw_readl(dev, DW_IC_DATA_CMD);
 213                 if (!i2c_slave_event(dev->slave, I2C_SLAVE_WRITE_RECEIVED,
 214                                      &val))
 215                         dev_vdbg(dev->dev, "Byte %X acked!", val);
 216         } else {
 217                 i2c_slave_event(dev->slave, I2C_SLAVE_STOP, &val);
 218                 stat = i2c_dw_read_clear_intrbits_slave(dev);
 219         }
 220
 221         return 1;
 222 }
 223
 224 static irqreturn_t i2c_dw_isr_slave(int this_irq, void *dev_id)
 225 {
 226         struct dw_i2c_dev *dev = dev_id;
 227         int ret;
 228
 229         i2c_dw_read_clear_intrbits_slave(dev);
 230         ret = i2c_dw_irq_handler_slave(dev);
 231         if (ret > 0)
 232                 complete(&dev->cmd_complete);
 233
 234         return IRQ_RETVAL(ret);
 235 }
 236
 237 static const struct i2c_algorithm i2c_dw_algo = {
 238         .functionality = i2c_dw_func,
 239         .reg_slave = i2c_dw_reg_slave,
 240         .unreg_slave = i2c_dw_unreg_slave,
 241 };
 242
 243 int i2c_dw_probe_slave(struct dw_i2c_dev *dev)
 244 {
 245         struct i2c_adapter *adap = &dev->adapter;
 246         int ret;
 247
 248         init_completion(&dev->cmd_complete);
 249
 250         dev->init = i2c_dw_init_slave;
 251         dev->disable = i2c_dw_disable;
 252         dev->disable_int = i2c_dw_disable_int;
 253
 254         ret = i2c_dw_set_reg_access(dev);
 255         if (ret)
 256                 return ret;
 257
 258         ret = i2c_dw_set_sda_hold(dev);
 259         if (ret)
 260                 return ret;
 261
 262         ret = dev->init(dev);
 263         if (ret)
 264                 return ret;
 265
 266         snprintf(adap->name, sizeof(adap->name),
 267                  "Synopsys DesignWare I2C Slave adapter");
 268         adap->retries = 3;
 269         adap->algo = &i2c_dw_algo;
 270         adap->dev.parent = dev->dev;
 271         i2c_set_adapdata(adap, dev);
 272
 273         ret = devm_request_irq(dev->dev, dev->irq, i2c_dw_isr_slave,
 274                                IRQF_SHARED, dev_name(dev->dev), dev);
 275         if (ret) {
 276                 dev_err(dev->dev, "failure requesting irq %i: %d\n",
 277                         dev->irq, ret);
 278                 return ret;
 279         }
 280
 281         ret = i2c_add_numbered_adapter(adap);
 282         if (ret)
 283                 dev_err(dev->dev, "failure adding adapter: %d\n", ret);
 284
 285         return ret;
 286 }
 287 EXPORT_SYMBOL_GPL(i2c_dw_probe_slave);
 288
 289 MODULE_AUTHOR("Luis Oliveira <lolivei@synopsys.com>");
 290 MODULE_DESCRIPTION("Synopsys DesignWare I2C bus slave adapter");
 291 MODULE_LICENSE("GPL v2");