drivers/i2c/busses/i2c-designware-master.c

   1 // SPDX-License-Identifier: GPL-2.0-or-later
   2 /*
   3  * Synopsys DesignWare I2C adapter driver (master only).
   4  *
   5  * Based on the TI DAVINCI I2C adapter driver.
   6  *
   7  * Copyright (C) 2006 Texas Instruments.
   8  * Copyright (C) 2007 MontaVista Software Inc.
   9  * Copyright (C) 2009 Provigent Ltd.
  10  */
  11 #include <linux/delay.h>
  12 #include <linux/err.h>
  13 #include <linux/errno.h>
  14 #include <linux/export.h>
  15 #include <linux/gpio/consumer.h>
  16 #include <linux/i2c.h>
  17 #include <linux/interrupt.h>
  18 #include <linux/io.h>
  19 #include <linux/module.h>
  20 #include <linux/pm_runtime.h>
  21 #include <linux/regmap.h>
  22 #include <linux/reset.h>
  23
  24 #include "i2c-designware-core.h"
  25
  26 #define AMD_TIMEOUT_MIN_US      25
  27 #define AMD_TIMEOUT_MAX_US      250
  28 #define AMD_MASTERCFG_MASK      GENMASK(15, 0)
  29
  30 static void i2c_dw_configure_fifo_master(struct dw_i2c_dev *dev)
  31 {
  32         /* Configure Tx/Rx FIFO threshold levels */
  33         regmap_write(dev->map, DW_IC_TX_TL, dev->tx_fifo_depth / 2);
  34         regmap_write(dev->map, DW_IC_RX_TL, 0);
  35
  36         /* Configure the I2C master */
  37         regmap_write(dev->map, DW_IC_CON, dev->master_cfg);
  38 }
  39
  40 static int i2c_dw_set_timings_master(struct dw_i2c_dev *dev)
  41 {
  42         u32 comp_param1;
  43         u32 sda_falling_time, scl_falling_time;
  44         struct i2c_timings *t = &dev->timings;
  45         const char *fp_str = "";
  46         u32 ic_clk;
  47         int ret;
  48
  49         ret = i2c_dw_acquire_lock(dev);
  50         if (ret)
  51                 return ret;
  52
  53         ret = regmap_read(dev->map, DW_IC_COMP_PARAM_1, &comp_param1);
  54         i2c_dw_release_lock(dev);
  55         if (ret)
  56                 return ret;
  57
  58         /* Set standard and fast speed dividers for high/low periods */
  59         sda_falling_time = t->sda_fall_ns ?: 300; /* ns */
  60         scl_falling_time = t->scl_fall_ns ?: 300; /* ns */
  61
  62         /* Calculate SCL timing parameters for standard mode if not set */
  63         if (!dev->ss_hcnt || !dev->ss_lcnt) {
  64                 ic_clk = i2c_dw_clk_rate(dev);
  65                 dev->ss_hcnt =
  66                         i2c_dw_scl_hcnt(ic_clk,
  67                                         4000,   /* tHD;STA = tHIGH = 4.0 us */
  68                                         sda_falling_time,
  69                                         0,      /* 0: DW default, 1: Ideal */
  70                                         0);     /* No offset */
  71                 dev->ss_lcnt =
  72                         i2c_dw_scl_lcnt(ic_clk,
  73                                         4700,   /* tLOW = 4.7 us */
  74                                         scl_falling_time,
  75                                         0);     /* No offset */
  76         }
  77         dev_dbg(dev->dev, "Standard Mode HCNT:LCNT = %d:%d\n",
  78                 dev->ss_hcnt, dev->ss_lcnt);
  79
  80         /*
  81          * Set SCL timing parameters for fast mode or fast mode plus. Only
  82          * difference is the timing parameter values since the registers are
  83          * the same.
  84          */
  85         if (t->bus_freq_hz == I2C_MAX_FAST_MODE_PLUS_FREQ) {
  86                 /*
  87                  * Check are Fast Mode Plus parameters available. Calculate
  88                  * SCL timing parameters for Fast Mode Plus if not set.
  89                  */
  90                 if (dev->fp_hcnt && dev->fp_lcnt) {
  91                         dev->fs_hcnt = dev->fp_hcnt;
  92                         dev->fs_lcnt = dev->fp_lcnt;
  93                 } else {
  94                         ic_clk = i2c_dw_clk_rate(dev);
  95                         dev->fs_hcnt =
  96                                 i2c_dw_scl_hcnt(ic_clk,
  97                                                 260,    /* tHIGH = 260 ns */
  98                                                 sda_falling_time,
  99                                                 0,      /* DW default */
 100                                                 0);     /* No offset */
 101                         dev->fs_lcnt =
 102                                 i2c_dw_scl_lcnt(ic_clk,
 103                                                 500,    /* tLOW = 500 ns */
 104                                                 scl_falling_time,
 105                                                 0);     /* No offset */
 106                 }
 107                 fp_str = " Plus";
 108         }
 109         /*
 110          * Calculate SCL timing parameters for fast mode if not set. They are
 111          * needed also in high speed mode.
 112          */
 113         if (!dev->fs_hcnt || !dev->fs_lcnt) {
 114                 ic_clk = i2c_dw_clk_rate(dev);
 115                 dev->fs_hcnt =
 116                         i2c_dw_scl_hcnt(ic_clk,
 117                                         600,    /* tHD;STA = tHIGH = 0.6 us */
 118                                         sda_falling_time,
 119                                         0,      /* 0: DW default, 1: Ideal */
 120                                         0);     /* No offset */
 121                 dev->fs_lcnt =
 122                         i2c_dw_scl_lcnt(ic_clk,
 123                                         1300,   /* tLOW = 1.3 us */
 124                                         scl_falling_time,
 125                                         0);     /* No offset */
 126         }
 127         dev_dbg(dev->dev, "Fast Mode%s HCNT:LCNT = %d:%d\n",
 128                 fp_str, dev->fs_hcnt, dev->fs_lcnt);
 129
 130         /* Check is high speed possible and fall back to fast mode if not */
 131         if ((dev->master_cfg & DW_IC_CON_SPEED_MASK) ==
 132                 DW_IC_CON_SPEED_HIGH) {
 133                 if ((comp_param1 & DW_IC_COMP_PARAM_1_SPEED_MODE_MASK)
 134                         != DW_IC_COMP_PARAM_1_SPEED_MODE_HIGH) {
 135                         dev_err(dev->dev, "High Speed not supported!\n");
 136                         t->bus_freq_hz = I2C_MAX_FAST_MODE_FREQ;
 137                         dev->master_cfg &= ~DW_IC_CON_SPEED_MASK;
 138                         dev->master_cfg |= DW_IC_CON_SPEED_FAST;
 139                         dev->hs_hcnt = 0;
 140                         dev->hs_lcnt = 0;
 141                 } else if (!dev->hs_hcnt || !dev->hs_lcnt) {
 142                         ic_clk = i2c_dw_clk_rate(dev);
 143                         dev->hs_hcnt =
 144                                 i2c_dw_scl_hcnt(ic_clk,
 145                                                 160,    /* tHIGH = 160 ns */
 146                                                 sda_falling_time,
 147                                                 0,      /* DW default */
 148                                                 0);     /* No offset */
 149                         dev->hs_lcnt =
 150                                 i2c_dw_scl_lcnt(ic_clk,
 151                                                 320,    /* tLOW = 320 ns */
 152                                                 scl_falling_time,
 153                                                 0);     /* No offset */
 154                 }
 155                 dev_dbg(dev->dev, "High Speed Mode HCNT:LCNT = %d:%d\n",
 156                         dev->hs_hcnt, dev->hs_lcnt);
 157         }
 158
 159         ret = i2c_dw_set_sda_hold(dev);
 160         if (ret)
 161                 return ret;
 162
 163         dev_dbg(dev->dev, "Bus speed: %s\n", i2c_freq_mode_string(t->bus_freq_hz));
 164         return 0;
 165 }
 166
 167 /**
 168  * i2c_dw_init_master() - Initialize the designware I2C master hardware
 169  * @dev: device private data
 170  *
 171  * This functions configures and enables the I2C master.
 172  * This function is called during I2C init function, and in case of timeout at
 173  * run time.
 174  */
 175 static int i2c_dw_init_master(struct dw_i2c_dev *dev)
 176 {
 177         int ret;
 178
 179         ret = i2c_dw_acquire_lock(dev);
 180         if (ret)
 181                 return ret;
 182
 183         /* Disable the adapter */
 184         __i2c_dw_disable(dev);
 185
 186         /* Write standard speed timing parameters */
 187         regmap_write(dev->map, DW_IC_SS_SCL_HCNT, dev->ss_hcnt);
 188         regmap_write(dev->map, DW_IC_SS_SCL_LCNT, dev->ss_lcnt);
 189
 190         /* Write fast mode/fast mode plus timing parameters */
 191         regmap_write(dev->map, DW_IC_FS_SCL_HCNT, dev->fs_hcnt);
 192         regmap_write(dev->map, DW_IC_FS_SCL_LCNT, dev->fs_lcnt);
 193
 194         /* Write high speed timing parameters if supported */
 195         if (dev->hs_hcnt && dev->hs_lcnt) {
 196                 regmap_write(dev->map, DW_IC_HS_SCL_HCNT, dev->hs_hcnt);
 197                 regmap_write(dev->map, DW_IC_HS_SCL_LCNT, dev->hs_lcnt);
 198         }
 199
 200         /* Write SDA hold time if supported */
 201         if (dev->sda_hold_time)
 202                 regmap_write(dev->map, DW_IC_SDA_HOLD, dev->sda_hold_time);
 203
 204         i2c_dw_configure_fifo_master(dev);
 205         i2c_dw_release_lock(dev);
 206
 207         return 0;
 208 }
 209
 210 static void i2c_dw_xfer_init(struct dw_i2c_dev *dev)
 211 {
 212         struct i2c_msg *msgs = dev->msgs;
 213         u32 ic_con = 0, ic_tar = 0;
 214         u32 dummy;
 215
 216         /* Disable the adapter */
 217         __i2c_dw_disable(dev);
 218
 219         /* If the slave address is ten bit address, enable 10BITADDR */
 220         if (msgs[dev->msg_write_idx].flags & I2C_M_TEN) {
 221                 ic_con = DW_IC_CON_10BITADDR_MASTER;
 222                 /*
 223                  * If I2C_DYNAMIC_TAR_UPDATE is set, the 10-bit addressing
 224                  * mode has to be enabled via bit 12 of IC_TAR register.
 225                  * We set it always as I2C_DYNAMIC_TAR_UPDATE can't be
 226                  * detected from registers.
 227                  */
 228                 ic_tar = DW_IC_TAR_10BITADDR_MASTER;
 229         }
 230
 231         regmap_update_bits(dev->map, DW_IC_CON, DW_IC_CON_10BITADDR_MASTER,
 232                            ic_con);
 233
 234         /*
 235          * Set the slave (target) address and enable 10-bit addressing mode
 236          * if applicable.
 237          */
 238         regmap_write(dev->map, DW_IC_TAR,
 239                      msgs[dev->msg_write_idx].addr | ic_tar);
 240
 241         /* Enforce disabled interrupts (due to HW issues) */
 242         i2c_dw_disable_int(dev);
 243
 244         /* Enable the adapter */
 245         __i2c_dw_enable(dev);
 246
 247         /* Dummy read to avoid the register getting stuck on Bay Trail */
 248         regmap_read(dev->map, DW_IC_ENABLE_STATUS, &dummy);
 249
 250         /* Clear and enable interrupts */
 251         regmap_read(dev->map, DW_IC_CLR_INTR, &dummy);
 252         regmap_write(dev->map, DW_IC_INTR_MASK, DW_IC_INTR_MASTER_MASK);
 253 }
 254
 255 static int i2c_dw_check_stopbit(struct dw_i2c_dev *dev)
 256 {
 257         u32 val;
 258         int ret;
 259
 260         ret = regmap_read_poll_timeout(dev->map, DW_IC_INTR_STAT, val,
 261                                        !(val & DW_IC_INTR_STOP_DET),
 262                                         1100, 20000);
 263         if (ret)
 264                 dev_err(dev->dev, "i2c timeout error %d\n", ret);
 265
 266         return ret;
 267 }
 268
 269 static int i2c_dw_status(struct dw_i2c_dev *dev)
 270 {
 271         int status;
 272
 273         status = i2c_dw_wait_bus_not_busy(dev);
 274         if (status)
 275                 return status;
 276
 277         return i2c_dw_check_stopbit(dev);
 278 }
 279
 280 /*
 281  * Initiate and continue master read/write transaction with polling
 282  * based transfer routine afterward write messages into the Tx buffer.
 283  */
 284 static int amd_i2c_dw_xfer_quirk(struct i2c_adapter *adap, struct i2c_msg *msgs, int num_msgs)
 285 {
 286         struct dw_i2c_dev *dev = i2c_get_adapdata(adap);
 287         int msg_wrt_idx, msg_itr_lmt, buf_len, data_idx;
 288         int cmd = 0, status;
 289         u8 *tx_buf;
 290         u32 val;
 291
 292         /*
 293          * In order to enable the interrupt for UCSI i.e. AMD NAVI GPU card,
 294          * it is mandatory to set the right value in specific register
 295          * (offset:0x474) as per the hardware IP specification.
 296          */
 297         regmap_write(dev->map, AMD_UCSI_INTR_REG, AMD_UCSI_INTR_EN);
 298
 299         dev->msgs = msgs;
 300         dev->msgs_num = num_msgs;
 301         i2c_dw_xfer_init(dev);
 302         i2c_dw_disable_int(dev);
 303
 304         /* Initiate messages read/write transaction */
 305         for (msg_wrt_idx = 0; msg_wrt_idx < num_msgs; msg_wrt_idx++) {
 306                 tx_buf = msgs[msg_wrt_idx].buf;
 307                 buf_len = msgs[msg_wrt_idx].len;
 308
 309                 if (!(msgs[msg_wrt_idx].flags & I2C_M_RD))
 310                         regmap_write(dev->map, DW_IC_TX_TL, buf_len - 1);
 311                 /*
 312                  * Initiate the i2c read/write transaction of buffer length,
 313                  * and poll for bus busy status. For the last message transfer,
 314                  * update the command with stopbit enable.
 315                  */
 316                 for (msg_itr_lmt = buf_len; msg_itr_lmt > 0; msg_itr_lmt--) {
 317                         if (msg_wrt_idx == num_msgs - 1 && msg_itr_lmt == 1)
 318                                 cmd |= BIT(9);
 319
 320                         if (msgs[msg_wrt_idx].flags & I2C_M_RD) {
 321                                 /* Due to hardware bug, need to write the same command twice. */
 322                                 regmap_write(dev->map, DW_IC_DATA_CMD, 0x100);
 323                                 regmap_write(dev->map, DW_IC_DATA_CMD, 0x100 | cmd);
 324                                 if (cmd) {
 325                                         regmap_write(dev->map, DW_IC_TX_TL, 2 * (buf_len - 1));
 326                                         regmap_write(dev->map, DW_IC_RX_TL, 2 * (buf_len - 1));
 327                                         /*
 328                                          * Need to check the stop bit. However, it cannot be
 329                                          * detected from the registers so we check it always
 330                                          * when read/write the last byte.
 331                                          */
 332                                         status = i2c_dw_status(dev);
 333                                         if (status)
 334                                                 return status;
 335
 336                                         for (data_idx = 0; data_idx < buf_len; data_idx++) {
 337                                                 regmap_read(dev->map, DW_IC_DATA_CMD, &val);
 338                                                 tx_buf[data_idx] = val;
 339                                         }
 340                                         status = i2c_dw_check_stopbit(dev);
 341                                         if (status)
 342                                                 return status;
 343                                 }
 344                         } else {
 345                                 regmap_write(dev->map, DW_IC_DATA_CMD, *tx_buf++ | cmd);
 346                                 usleep_range(AMD_TIMEOUT_MIN_US, AMD_TIMEOUT_MAX_US);
 347                         }
 348                 }
 349                 status = i2c_dw_check_stopbit(dev);
 350                 if (status)
 351                         return status;
 352         }
 353
 354         return 0;
 355 }
 356
 357 /*
 358  * Initiate (and continue) low level master read/write transaction.
 359  * This function is only called from i2c_dw_isr, and pumping i2c_msg
 360  * messages into the tx buffer.  Even if the size of i2c_msg data is
 361  * longer than the size of the tx buffer, it handles everything.
 362  */
 363 static void
 364 i2c_dw_xfer_msg(struct dw_i2c_dev *dev)
 365 {
 366         struct i2c_msg *msgs = dev->msgs;
 367         u32 intr_mask;
 368         int tx_limit, rx_limit;
 369         u32 addr = msgs[dev->msg_write_idx].addr;
 370         u32 buf_len = dev->tx_buf_len;
 371         u8 *buf = dev->tx_buf;
 372         bool need_restart = false;
 373         unsigned int flr;
 374
 375         intr_mask = DW_IC_INTR_MASTER_MASK;
 376
 377         for (; dev->msg_write_idx < dev->msgs_num; dev->msg_write_idx++) {
 378                 u32 flags = msgs[dev->msg_write_idx].flags;
 379
 380                 /*
 381                  * If target address has changed, we need to
 382                  * reprogram the target address in the I2C
 383                  * adapter when we are done with this transfer.
 384                  */
 385                 if (msgs[dev->msg_write_idx].addr != addr) {
 386                         dev_err(dev->dev,
 387                                 "%s: invalid target address\n", __func__);
 388                         dev->msg_err = -EINVAL;
 389                         break;
 390                 }
 391
 392                 if (!(dev->status & STATUS_WRITE_IN_PROGRESS)) {
 393                         /* new i2c_msg */
 394                         buf = msgs[dev->msg_write_idx].buf;
 395                         buf_len = msgs[dev->msg_write_idx].len;
 396
 397                         /* If both IC_EMPTYFIFO_HOLD_MASTER_EN and
 398                          * IC_RESTART_EN are set, we must manually
 399                          * set restart bit between messages.
 400                          */
 401                         if ((dev->master_cfg & DW_IC_CON_RESTART_EN) &&
 402                                         (dev->msg_write_idx > 0))
 403                                 need_restart = true;
 404                 }
 405
 406                 regmap_read(dev->map, DW_IC_TXFLR, &flr);
 407                 tx_limit = dev->tx_fifo_depth - flr;
 408
 409                 regmap_read(dev->map, DW_IC_RXFLR, &flr);
 410                 rx_limit = dev->rx_fifo_depth - flr;
 411
 412                 while (buf_len > 0 && tx_limit > 0 && rx_limit > 0) {
 413                         u32 cmd = 0;
 414
 415                         /*
 416                          * If IC_EMPTYFIFO_HOLD_MASTER_EN is set we must
 417                          * manually set the stop bit. However, it cannot be
 418                          * detected from the registers so we set it always
 419                          * when writing/reading the last byte.
 420                          */
 421
 422                         /*
 423                          * i2c-core always sets the buffer length of
 424                          * I2C_FUNC_SMBUS_BLOCK_DATA to 1. The length will
 425                          * be adjusted when receiving the first byte.
 426                          * Thus we can't stop the transaction here.
 427                          */
 428                         if (dev->msg_write_idx == dev->msgs_num - 1 &&
 429                             buf_len == 1 && !(flags & I2C_M_RECV_LEN))
 430                                 cmd |= BIT(9);
 431
 432                         if (need_restart) {
 433                                 cmd |= BIT(10);
 434                                 need_restart = false;
 435                         }
 436
 437                         if (msgs[dev->msg_write_idx].flags & I2C_M_RD) {
 438
 439                                 /* Avoid rx buffer overrun */
 440                                 if (dev->rx_outstanding >= dev->rx_fifo_depth)
 441                                         break;
 442
 443                                 regmap_write(dev->map, DW_IC_DATA_CMD,
 444                                              cmd | 0x100);
 445                                 rx_limit--;
 446                                 dev->rx_outstanding++;
 447                         } else {
 448                                 regmap_write(dev->map, DW_IC_DATA_CMD,
 449                                              cmd | *buf++);
 450                         }
 451                         tx_limit--; buf_len--;
 452                 }
 453
 454                 dev->tx_buf = buf;
 455                 dev->tx_buf_len = buf_len;
 456
 457                 /*
 458                  * Because we don't know the buffer length in the
 459                  * I2C_FUNC_SMBUS_BLOCK_DATA case, we can't stop
 460                  * the transaction here.
 461                  */
 462                 if (buf_len > 0 || flags & I2C_M_RECV_LEN) {
 463                         /* more bytes to be written */
 464                         dev->status |= STATUS_WRITE_IN_PROGRESS;
 465                         break;
 466                 } else
 467                         dev->status &= ~STATUS_WRITE_IN_PROGRESS;
 468         }
 469
 470         /*
 471          * If i2c_msg index search is completed, we don't need TX_EMPTY
 472          * interrupt any more.
 473          */
 474         if (dev->msg_write_idx == dev->msgs_num)
 475                 intr_mask &= ~DW_IC_INTR_TX_EMPTY;
 476
 477         if (dev->msg_err)
 478                 intr_mask = 0;
 479
 480         regmap_write(dev->map,  DW_IC_INTR_MASK, intr_mask);
 481 }
 482
 483 static u8
 484 i2c_dw_recv_len(struct dw_i2c_dev *dev, u8 len)
 485 {
 486         struct i2c_msg *msgs = dev->msgs;
 487         u32 flags = msgs[dev->msg_read_idx].flags;
 488
 489         /*
 490          * Adjust the buffer length and mask the flag
 491          * after receiving the first byte.
 492          */
 493         len += (flags & I2C_CLIENT_PEC) ? 2 : 1;
 494         dev->tx_buf_len = len - min_t(u8, len, dev->rx_outstanding);
 495         msgs[dev->msg_read_idx].len = len;
 496         msgs[dev->msg_read_idx].flags &= ~I2C_M_RECV_LEN;
 497
 498         return len;
 499 }
 500
 501 static void
 502 i2c_dw_read(struct dw_i2c_dev *dev)
 503 {
 504         struct i2c_msg *msgs = dev->msgs;
 505         unsigned int rx_valid;
 506
 507         for (; dev->msg_read_idx < dev->msgs_num; dev->msg_read_idx++) {
 508                 u32 len, tmp;
 509                 u8 *buf;
 510
 511                 if (!(msgs[dev->msg_read_idx].flags & I2C_M_RD))
 512                         continue;
 513
 514                 if (!(dev->status & STATUS_READ_IN_PROGRESS)) {
 515                         len = msgs[dev->msg_read_idx].len;
 516                         buf = msgs[dev->msg_read_idx].buf;
 517                 } else {
 518                         len = dev->rx_buf_len;
 519                         buf = dev->rx_buf;
 520                 }
 521
 522                 regmap_read(dev->map, DW_IC_RXFLR, &rx_valid);
 523
 524                 for (; len > 0 && rx_valid > 0; len--, rx_valid--) {
 525                         u32 flags = msgs[dev->msg_read_idx].flags;
 526
 527                         regmap_read(dev->map, DW_IC_DATA_CMD, &tmp);
 528                         /* Ensure length byte is a valid value */
 529                         if (flags & I2C_M_RECV_LEN &&
 530                             (tmp & DW_IC_DATA_CMD_DAT) <= I2C_SMBUS_BLOCK_MAX && tmp > 0) {
 531                                 len = i2c_dw_recv_len(dev, tmp);
 532                         }
 533                         *buf++ = tmp;
 534                         dev->rx_outstanding--;
 535                 }
 536
 537                 if (len > 0) {
 538                         dev->status |= STATUS_READ_IN_PROGRESS;
 539                         dev->rx_buf_len = len;
 540                         dev->rx_buf = buf;
 541                         return;
 542                 } else
 543                         dev->status &= ~STATUS_READ_IN_PROGRESS;
 544         }
 545 }
 546
 547 /*
 548  * Prepare controller for a transaction and call i2c_dw_xfer_msg.
 549  */
 550 static int
 551 i2c_dw_xfer(struct i2c_adapter *adap, struct i2c_msg msgs[], int num)
 552 {
 553         struct dw_i2c_dev *dev = i2c_get_adapdata(adap);
 554         int ret;
 555
 556         dev_dbg(dev->dev, "%s: msgs: %d\n", __func__, num);
 557
 558         pm_runtime_get_sync(dev->dev);
 559
 560         /*
 561          * Initiate I2C message transfer when AMD NAVI GPU card is enabled,
 562          * As it is polling based transfer mechanism, which does not support
 563          * interrupt based functionalities of existing DesignWare driver.
 564          */
 565         if ((dev->flags & MODEL_MASK) == MODEL_AMD_NAVI_GPU) {
 566                 ret = amd_i2c_dw_xfer_quirk(adap, msgs, num);
 567                 goto done_nolock;
 568         }
 569
 570         if (dev_WARN_ONCE(dev->dev, dev->suspended, "Transfer while suspended\n")) {
 571                 ret = -ESHUTDOWN;
 572                 goto done_nolock;
 573         }
 574
 575         reinit_completion(&dev->cmd_complete);
 576         dev->msgs = msgs;
 577         dev->msgs_num = num;
 578         dev->cmd_err = 0;
 579         dev->msg_write_idx = 0;
 580         dev->msg_read_idx = 0;
 581         dev->msg_err = 0;
 582         dev->status = STATUS_IDLE;
 583         dev->abort_source = 0;
 584         dev->rx_outstanding = 0;
 585
 586         ret = i2c_dw_acquire_lock(dev);
 587         if (ret)
 588                 goto done_nolock;
 589
 590         ret = i2c_dw_wait_bus_not_busy(dev);
 591         if (ret < 0)
 592                 goto done;
 593
 594         /* Start the transfers */
 595         i2c_dw_xfer_init(dev);
 596
 597         /* Wait for tx to complete */
 598         if (!wait_for_completion_timeout(&dev->cmd_complete, adap->timeout)) {
 599                 dev_err(dev->dev, "controller timed out\n");
 600                 /* i2c_dw_init implicitly disables the adapter */
 601                 i2c_recover_bus(&dev->adapter);
 602                 i2c_dw_init_master(dev);
 603                 ret = -ETIMEDOUT;
 604                 goto done;
 605         }
 606
 607         /*
 608          * We must disable the adapter before returning and signaling the end
 609          * of the current transfer. Otherwise the hardware might continue
 610          * generating interrupts which in turn causes a race condition with
 611          * the following transfer.  Needs some more investigation if the
 612          * additional interrupts are a hardware bug or this driver doesn't
 613          * handle them correctly yet.
 614          */
 615         __i2c_dw_disable_nowait(dev);
 616
 617         if (dev->msg_err) {
 618                 ret = dev->msg_err;
 619                 goto done;
 620         }
 621
 622         /* No error */
 623         if (likely(!dev->cmd_err && !dev->status)) {
 624                 ret = num;
 625                 goto done;
 626         }
 627
 628         /* We have an error */
 629         if (dev->cmd_err == DW_IC_ERR_TX_ABRT) {
 630                 ret = i2c_dw_handle_tx_abort(dev);
 631                 goto done;
 632         }
 633
 634         if (dev->status)
 635                 dev_err(dev->dev,
 636                         "transfer terminated early - interrupt latency too high?\n");
 637
 638         ret = -EIO;
 639
 640 done:
 641         i2c_dw_release_lock(dev);
 642
 643 done_nolock:
 644         pm_runtime_mark_last_busy(dev->dev);
 645         pm_runtime_put_autosuspend(dev->dev);
 646
 647         return ret;
 648 }
 649
 650 static const struct i2c_algorithm i2c_dw_algo = {
 651         .master_xfer = i2c_dw_xfer,
 652         .functionality = i2c_dw_func,
 653 };
 654
 655 static const struct i2c_adapter_quirks i2c_dw_quirks = {
 656         .flags = I2C_AQ_NO_ZERO_LEN,
 657 };
 658
 659 static u32 i2c_dw_read_clear_intrbits(struct dw_i2c_dev *dev)
 660 {
 661         u32 stat, dummy;
 662
 663         /*
 664          * The IC_INTR_STAT register just indicates "enabled" interrupts.
 665          * The unmasked raw version of interrupt status bits is available
 666          * in the IC_RAW_INTR_STAT register.
 667          *
 668          * That is,
 669          *   stat = readl(IC_INTR_STAT);
 670          * equals to,
 671          *   stat = readl(IC_RAW_INTR_STAT) & readl(IC_INTR_MASK);
 672          *
 673          * The raw version might be useful for debugging purposes.
 674          */
 675         regmap_read(dev->map, DW_IC_INTR_STAT, &stat);
 676
 677         /*
 678          * Do not use the IC_CLR_INTR register to clear interrupts, or
 679          * you'll miss some interrupts, triggered during the period from
 680          * readl(IC_INTR_STAT) to readl(IC_CLR_INTR).
 681          *
 682          * Instead, use the separately-prepared IC_CLR_* registers.
 683          */
 684         if (stat & DW_IC_INTR_RX_UNDER)
 685                 regmap_read(dev->map, DW_IC_CLR_RX_UNDER, &dummy);
 686         if (stat & DW_IC_INTR_RX_OVER)
 687                 regmap_read(dev->map, DW_IC_CLR_RX_OVER, &dummy);
 688         if (stat & DW_IC_INTR_TX_OVER)
 689                 regmap_read(dev->map, DW_IC_CLR_TX_OVER, &dummy);
 690         if (stat & DW_IC_INTR_RD_REQ)
 691                 regmap_read(dev->map, DW_IC_CLR_RD_REQ, &dummy);
 692         if (stat & DW_IC_INTR_TX_ABRT) {
 693                 /*
 694                  * The IC_TX_ABRT_SOURCE register is cleared whenever
 695                  * the IC_CLR_TX_ABRT is read.  Preserve it beforehand.
 696                  */
 697                 regmap_read(dev->map, DW_IC_TX_ABRT_SOURCE, &dev->abort_source);
 698                 regmap_read(dev->map, DW_IC_CLR_TX_ABRT, &dummy);
 699         }
 700         if (stat & DW_IC_INTR_RX_DONE)
 701                 regmap_read(dev->map, DW_IC_CLR_RX_DONE, &dummy);
 702         if (stat & DW_IC_INTR_ACTIVITY)
 703                 regmap_read(dev->map, DW_IC_CLR_ACTIVITY, &dummy);
 704         if (stat & DW_IC_INTR_STOP_DET)
 705                 regmap_read(dev->map, DW_IC_CLR_STOP_DET, &dummy);
 706         if (stat & DW_IC_INTR_START_DET)
 707                 regmap_read(dev->map, DW_IC_CLR_START_DET, &dummy);
 708         if (stat & DW_IC_INTR_GEN_CALL)
 709                 regmap_read(dev->map, DW_IC_CLR_GEN_CALL, &dummy);
 710
 711         return stat;
 712 }
 713
 714 /*
 715  * Interrupt service routine. This gets called whenever an I2C master interrupt
 716  * occurs.
 717  */
 718 static int i2c_dw_irq_handler_master(struct dw_i2c_dev *dev)
 719 {
 720         u32 stat;
 721
 722         stat = i2c_dw_read_clear_intrbits(dev);
 723         if (stat & DW_IC_INTR_TX_ABRT) {
 724                 dev->cmd_err |= DW_IC_ERR_TX_ABRT;
 725                 dev->status = STATUS_IDLE;
 726
 727                 /*
 728                  * Anytime TX_ABRT is set, the contents of the tx/rx
 729                  * buffers are flushed. Make sure to skip them.
 730                  */
 731                 regmap_write(dev->map, DW_IC_INTR_MASK, 0);
 732                 goto tx_aborted;
 733         }
 734
 735         if (stat & DW_IC_INTR_RX_FULL)
 736                 i2c_dw_read(dev);
 737
 738         if (stat & DW_IC_INTR_TX_EMPTY)
 739                 i2c_dw_xfer_msg(dev);
 740
 741         /*
 742          * No need to modify or disable the interrupt mask here.
 743          * i2c_dw_xfer_msg() will take care of it according to
 744          * the current transmit status.
 745          */
 746
 747 tx_aborted:
 748         if ((stat & (DW_IC_INTR_TX_ABRT | DW_IC_INTR_STOP_DET)) || dev->msg_err)
 749                 complete(&dev->cmd_complete);
 750         else if (unlikely(dev->flags & ACCESS_INTR_MASK)) {
 751                 /* Workaround to trigger pending interrupt */
 752                 regmap_read(dev->map, DW_IC_INTR_MASK, &stat);
 753                 i2c_dw_disable_int(dev);
 754                 regmap_write(dev->map, DW_IC_INTR_MASK, stat);
 755         }
 756
 757         return 0;
 758 }
 759
 760 static irqreturn_t i2c_dw_isr(int this_irq, void *dev_id)
 761 {
 762         struct dw_i2c_dev *dev = dev_id;
 763         u32 stat, enabled;
 764
 765         regmap_read(dev->map, DW_IC_ENABLE, &enabled);
 766         regmap_read(dev->map, DW_IC_RAW_INTR_STAT, &stat);
 767         dev_dbg(dev->dev, "enabled=%#x stat=%#x\n", enabled, stat);
 768         if (!enabled || !(stat & ~DW_IC_INTR_ACTIVITY))
 769                 return IRQ_NONE;
 770
 771         i2c_dw_irq_handler_master(dev);
 772
 773         return IRQ_HANDLED;
 774 }
 775
 776 void i2c_dw_configure_master(struct dw_i2c_dev *dev)
 777 {
 778         struct i2c_timings *t = &dev->timings;
 779
 780         dev->functionality = I2C_FUNC_10BIT_ADDR | DW_IC_DEFAULT_FUNCTIONALITY;
 781
 782         dev->master_cfg = DW_IC_CON_MASTER | DW_IC_CON_SLAVE_DISABLE |
 783                           DW_IC_CON_RESTART_EN;
 784
 785         dev->mode = DW_IC_MASTER;
 786
 787         switch (t->bus_freq_hz) {
 788         case I2C_MAX_STANDARD_MODE_FREQ:
 789                 dev->master_cfg |= DW_IC_CON_SPEED_STD;
 790                 break;
 791         case I2C_MAX_HIGH_SPEED_MODE_FREQ:
 792                 dev->master_cfg |= DW_IC_CON_SPEED_HIGH;
 793                 break;
 794         default:
 795                 dev->master_cfg |= DW_IC_CON_SPEED_FAST;
 796         }
 797 }
 798 EXPORT_SYMBOL_GPL(i2c_dw_configure_master);
 799
 800 static void i2c_dw_prepare_recovery(struct i2c_adapter *adap)
 801 {
 802         struct dw_i2c_dev *dev = i2c_get_adapdata(adap);
 803
 804         i2c_dw_disable(dev);
 805         reset_control_assert(dev->rst);
 806         i2c_dw_prepare_clk(dev, false);
 807 }
 808
 809 static void i2c_dw_unprepare_recovery(struct i2c_adapter *adap)
 810 {
 811         struct dw_i2c_dev *dev = i2c_get_adapdata(adap);
 812
 813         i2c_dw_prepare_clk(dev, true);
 814         reset_control_deassert(dev->rst);
 815         i2c_dw_init_master(dev);
 816 }
 817
 818 static int i2c_dw_init_recovery_info(struct dw_i2c_dev *dev)
 819 {
 820         struct i2c_bus_recovery_info *rinfo = &dev->rinfo;
 821         struct i2c_adapter *adap = &dev->adapter;
 822         struct gpio_desc *gpio;
 823
 824         gpio = devm_gpiod_get_optional(dev->dev, "scl", GPIOD_OUT_HIGH);
 825         if (IS_ERR_OR_NULL(gpio))
 826                 return PTR_ERR_OR_ZERO(gpio);
 827
 828         rinfo->scl_gpiod = gpio;
 829
 830         gpio = devm_gpiod_get_optional(dev->dev, "sda", GPIOD_IN);
 831         if (IS_ERR(gpio))
 832                 return PTR_ERR(gpio);
 833         rinfo->sda_gpiod = gpio;
 834
 835         rinfo->recover_bus = i2c_generic_scl_recovery;
 836         rinfo->prepare_recovery = i2c_dw_prepare_recovery;
 837         rinfo->unprepare_recovery = i2c_dw_unprepare_recovery;
 838         adap->bus_recovery_info = rinfo;
 839
 840         dev_info(dev->dev, "running with gpio recovery mode! scl%s",
 841                  rinfo->sda_gpiod ? ",sda" : "");
 842
 843         return 0;
 844 }
 845
 846 static int amd_i2c_adap_quirk(struct dw_i2c_dev *dev)
 847 {
 848         struct i2c_adapter *adap = &dev->adapter;
 849         int ret;
 850
 851         pm_runtime_get_noresume(dev->dev);
 852         ret = i2c_add_numbered_adapter(adap);
 853         if (ret)
 854                 dev_err(dev->dev, "Failed to add adapter: %d\n", ret);
 855         pm_runtime_put_noidle(dev->dev);
 856
 857         return ret;
 858 }
 859
 860 int i2c_dw_probe_master(struct dw_i2c_dev *dev)
 861 {
 862         struct i2c_adapter *adap = &dev->adapter;
 863         unsigned long irq_flags;
 864         int ret;
 865
 866         init_completion(&dev->cmd_complete);
 867
 868         dev->init = i2c_dw_init_master;
 869         dev->disable = i2c_dw_disable;
 870         dev->disable_int = i2c_dw_disable_int;
 871
 872         ret = i2c_dw_init_regmap(dev);
 873         if (ret)
 874                 return ret;
 875
 876         ret = i2c_dw_set_timings_master(dev);
 877         if (ret)
 878                 return ret;
 879
 880         ret = i2c_dw_set_fifo_size(dev);
 881         if (ret)
 882                 return ret;
 883
 884         ret = dev->init(dev);
 885         if (ret)
 886                 return ret;
 887
 888         snprintf(adap->name, sizeof(adap->name),
 889                  "Synopsys DesignWare I2C adapter");
 890         adap->retries = 3;
 891         adap->algo = &i2c_dw_algo;
 892         adap->quirks = &i2c_dw_quirks;
 893         adap->dev.parent = dev->dev;
 894         i2c_set_adapdata(adap, dev);
 895
 896         if ((dev->flags & MODEL_MASK) == MODEL_AMD_NAVI_GPU)
 897                 return amd_i2c_adap_quirk(dev);
 898
 899         if (dev->flags & ACCESS_NO_IRQ_SUSPEND) {
 900                 irq_flags = IRQF_NO_SUSPEND;
 901         } else {
 902                 irq_flags = IRQF_SHARED | IRQF_COND_SUSPEND;
 903         }
 904
 905         i2c_dw_disable_int(dev);
 906         ret = devm_request_irq(dev->dev, dev->irq, i2c_dw_isr, irq_flags,
 907                                dev_name(dev->dev), dev);
 908         if (ret) {
 909                 dev_err(dev->dev, "failure requesting irq %i: %d\n",
 910                         dev->irq, ret);
 911                 return ret;
 912         }
 913
 914         ret = i2c_dw_init_recovery_info(dev);
 915         if (ret)
 916                 return ret;
 917
 918         /*
 919          * Increment PM usage count during adapter registration in order to
 920          * avoid possible spurious runtime suspend when adapter device is
 921          * registered to the device core and immediate resume in case bus has
 922          * registered I2C slaves that do I2C transfers in their probe.
 923          */
 924         pm_runtime_get_noresume(dev->dev);
 925         ret = i2c_add_numbered_adapter(adap);
 926         if (ret)
 927                 dev_err(dev->dev, "failure adding adapter: %d\n", ret);
 928         pm_runtime_put_noidle(dev->dev);
 929
 930         return ret;
 931 }
 932 EXPORT_SYMBOL_GPL(i2c_dw_probe_master);
 933
 934 MODULE_DESCRIPTION("Synopsys DesignWare I2C bus master adapter");
 935 MODULE_LICENSE("GPL");