drivers/i2c/busses/i2c-aspeed.c

   1 // SPDX-License-Identifier: GPL-2.0-only
   2 /*
   3  *  Aspeed 24XX/25XX I2C Controller.
   4  *
   5  *  Copyright (C) 2012-2017 ASPEED Technology Inc.
   6  *  Copyright 2017 IBM Corporation
   7  *  Copyright 2017 Google, Inc.
   8  */
   9
  10 #include <linux/clk.h>
  11 #include <linux/completion.h>
  12 #include <linux/err.h>
  13 #include <linux/errno.h>
  14 #include <linux/i2c.h>
  15 #include <linux/init.h>
  16 #include <linux/interrupt.h>
  17 #include <linux/io.h>
  18 #include <linux/irq.h>
  19 #include <linux/irqchip/chained_irq.h>
  20 #include <linux/irqdomain.h>
  21 #include <linux/kernel.h>
  22 #include <linux/module.h>
  23 #include <linux/of_address.h>
  24 #include <linux/of_irq.h>
  25 #include <linux/of_platform.h>
  26 #include <linux/platform_device.h>
  27 #include <linux/reset.h>
  28 #include <linux/slab.h>
  29
  30 /* I2C Register */
  31 #define ASPEED_I2C_FUN_CTRL_REG                         0x00
  32 #define ASPEED_I2C_AC_TIMING_REG1                       0x04
  33 #define ASPEED_I2C_AC_TIMING_REG2                       0x08
  34 #define ASPEED_I2C_INTR_CTRL_REG                        0x0c
  35 #define ASPEED_I2C_INTR_STS_REG                         0x10
  36 #define ASPEED_I2C_CMD_REG                              0x14
  37 #define ASPEED_I2C_DEV_ADDR_REG                         0x18
  38 #define ASPEED_I2C_BYTE_BUF_REG                         0x20
  39
  40 /* Global Register Definition */
  41 /* 0x00 : I2C Interrupt Status Register  */
  42 /* 0x08 : I2C Interrupt Target Assignment  */
  43
  44 /* Device Register Definition */
  45 /* 0x00 : I2CD Function Control Register  */
  46 #define ASPEED_I2CD_MULTI_MASTER_DIS                    BIT(15)
  47 #define ASPEED_I2CD_SDA_DRIVE_1T_EN                     BIT(8)
  48 #define ASPEED_I2CD_M_SDA_DRIVE_1T_EN                   BIT(7)
  49 #define ASPEED_I2CD_M_HIGH_SPEED_EN                     BIT(6)
  50 #define ASPEED_I2CD_SLAVE_EN                            BIT(1)
  51 #define ASPEED_I2CD_MASTER_EN                           BIT(0)
  52
  53 /* 0x04 : I2CD Clock and AC Timing Control Register #1 */
  54 #define ASPEED_I2CD_TIME_TBUF_MASK                      GENMASK(31, 28)
  55 #define ASPEED_I2CD_TIME_THDSTA_MASK                    GENMASK(27, 24)
  56 #define ASPEED_I2CD_TIME_TACST_MASK                     GENMASK(23, 20)
  57 #define ASPEED_I2CD_TIME_SCL_HIGH_SHIFT                 16
  58 #define ASPEED_I2CD_TIME_SCL_HIGH_MASK                  GENMASK(19, 16)
  59 #define ASPEED_I2CD_TIME_SCL_LOW_SHIFT                  12
  60 #define ASPEED_I2CD_TIME_SCL_LOW_MASK                   GENMASK(15, 12)
  61 #define ASPEED_I2CD_TIME_BASE_DIVISOR_MASK              GENMASK(3, 0)
  62 #define ASPEED_I2CD_TIME_SCL_REG_MAX                    GENMASK(3, 0)
  63 /* 0x08 : I2CD Clock and AC Timing Control Register #2 */
  64 #define ASPEED_NO_TIMEOUT_CTRL                          0
  65
  66 /* 0x0c : I2CD Interrupt Control Register &
  67  * 0x10 : I2CD Interrupt Status Register
  68  *
  69  * These share bit definitions, so use the same values for the enable &
  70  * status bits.
  71  */
  72 #define ASPEED_I2CD_INTR_SDA_DL_TIMEOUT                 BIT(14)
  73 #define ASPEED_I2CD_INTR_BUS_RECOVER_DONE               BIT(13)
  74 #define ASPEED_I2CD_INTR_SLAVE_MATCH                    BIT(7)
  75 #define ASPEED_I2CD_INTR_SCL_TIMEOUT                    BIT(6)
  76 #define ASPEED_I2CD_INTR_ABNORMAL                       BIT(5)
  77 #define ASPEED_I2CD_INTR_NORMAL_STOP                    BIT(4)
  78 #define ASPEED_I2CD_INTR_ARBIT_LOSS                     BIT(3)
  79 #define ASPEED_I2CD_INTR_RX_DONE                        BIT(2)
  80 #define ASPEED_I2CD_INTR_TX_NAK                         BIT(1)
  81 #define ASPEED_I2CD_INTR_TX_ACK                         BIT(0)
  82 #define ASPEED_I2CD_INTR_MASTER_ERRORS                                         \
  83                 (ASPEED_I2CD_INTR_SDA_DL_TIMEOUT |                             \
  84                  ASPEED_I2CD_INTR_SCL_TIMEOUT |                                \
  85                  ASPEED_I2CD_INTR_ABNORMAL |                                   \
  86                  ASPEED_I2CD_INTR_ARBIT_LOSS)
  87 #define ASPEED_I2CD_INTR_ALL                                                   \
  88                 (ASPEED_I2CD_INTR_SDA_DL_TIMEOUT |                             \
  89                  ASPEED_I2CD_INTR_BUS_RECOVER_DONE |                           \
  90                  ASPEED_I2CD_INTR_SCL_TIMEOUT |                                \
  91                  ASPEED_I2CD_INTR_ABNORMAL |                                   \
  92                  ASPEED_I2CD_INTR_NORMAL_STOP |                                \
  93                  ASPEED_I2CD_INTR_ARBIT_LOSS |                                 \
  94                  ASPEED_I2CD_INTR_RX_DONE |                                    \
  95                  ASPEED_I2CD_INTR_TX_NAK |                                     \
  96                  ASPEED_I2CD_INTR_TX_ACK)
  97
  98 /* 0x14 : I2CD Command/Status Register   */
  99 #define ASPEED_I2CD_SCL_LINE_STS                        BIT(18)
 100 #define ASPEED_I2CD_SDA_LINE_STS                        BIT(17)
 101 #define ASPEED_I2CD_BUS_BUSY_STS                        BIT(16)
 102 #define ASPEED_I2CD_BUS_RECOVER_CMD                     BIT(11)
 103
 104 /* Command Bit */
 105 #define ASPEED_I2CD_M_STOP_CMD                          BIT(5)
 106 #define ASPEED_I2CD_M_S_RX_CMD_LAST                     BIT(4)
 107 #define ASPEED_I2CD_M_RX_CMD                            BIT(3)
 108 #define ASPEED_I2CD_S_TX_CMD                            BIT(2)
 109 #define ASPEED_I2CD_M_TX_CMD                            BIT(1)
 110 #define ASPEED_I2CD_M_START_CMD                         BIT(0)
 111 #define ASPEED_I2CD_MASTER_CMDS_MASK                                           \
 112                 (ASPEED_I2CD_M_STOP_CMD |                                      \
 113                  ASPEED_I2CD_M_S_RX_CMD_LAST |                                 \
 114                  ASPEED_I2CD_M_RX_CMD |                                        \
 115                  ASPEED_I2CD_M_TX_CMD |                                        \
 116                  ASPEED_I2CD_M_START_CMD)
 117
 118 /* 0x18 : I2CD Slave Device Address Register   */
 119 #define ASPEED_I2CD_DEV_ADDR_MASK                       GENMASK(6, 0)
 120
 121 enum aspeed_i2c_master_state {
 122         ASPEED_I2C_MASTER_INACTIVE,
 123         ASPEED_I2C_MASTER_PENDING,
 124         ASPEED_I2C_MASTER_START,
 125         ASPEED_I2C_MASTER_TX_FIRST,
 126         ASPEED_I2C_MASTER_TX,
 127         ASPEED_I2C_MASTER_RX_FIRST,
 128         ASPEED_I2C_MASTER_RX,
 129         ASPEED_I2C_MASTER_STOP,
 130 };
 131
 132 enum aspeed_i2c_slave_state {
 133         ASPEED_I2C_SLAVE_INACTIVE,
 134         ASPEED_I2C_SLAVE_START,
 135         ASPEED_I2C_SLAVE_READ_REQUESTED,
 136         ASPEED_I2C_SLAVE_READ_PROCESSED,
 137         ASPEED_I2C_SLAVE_WRITE_REQUESTED,
 138         ASPEED_I2C_SLAVE_WRITE_RECEIVED,
 139         ASPEED_I2C_SLAVE_STOP,
 140 };
 141
 142 struct aspeed_i2c_bus {
 143         struct i2c_adapter              adap;
 144         struct device                   *dev;
 145         void __iomem                    *base;
 146         struct reset_control            *rst;
 147         /* Synchronizes I/O mem access to base. */
 148         spinlock_t                      lock;
 149         struct completion               cmd_complete;
 150         u32                             (*get_clk_reg_val)(struct device *dev,
 151                                                            u32 divisor);
 152         unsigned long                   parent_clk_frequency;
 153         u32                             bus_frequency;
 154         /* Transaction state. */
 155         enum aspeed_i2c_master_state    master_state;
 156         struct i2c_msg                  *msgs;
 157         size_t                          buf_index;
 158         size_t                          msgs_index;
 159         size_t                          msgs_count;
 160         bool                            send_stop;
 161         int                             cmd_err;
 162         /* Protected only by i2c_lock_bus */
 163         int                             master_xfer_result;
 164         /* Multi-master */
 165         bool                            multi_master;
 166 #if IS_ENABLED(CONFIG_I2C_SLAVE)
 167         struct i2c_client               *slave;
 168         enum aspeed_i2c_slave_state     slave_state;
 169 #endif /* CONFIG_I2C_SLAVE */
 170 };
 171
 172 static int aspeed_i2c_reset(struct aspeed_i2c_bus *bus);
 173
 174 static int aspeed_i2c_recover_bus(struct aspeed_i2c_bus *bus)
 175 {
 176         unsigned long time_left, flags;
 177         int ret = 0;
 178         u32 command;
 179
 180         spin_lock_irqsave(&bus->lock, flags);
 181         command = readl(bus->base + ASPEED_I2C_CMD_REG);
 182
 183         if (command & ASPEED_I2CD_SDA_LINE_STS) {
 184                 /* Bus is idle: no recovery needed. */
 185                 if (command & ASPEED_I2CD_SCL_LINE_STS)
 186                         goto out;
 187                 dev_dbg(bus->dev, "SCL hung (state %x), attempting recovery\n",
 188                         command);
 189
 190                 reinit_completion(&bus->cmd_complete);
 191                 writel(ASPEED_I2CD_M_STOP_CMD, bus->base + ASPEED_I2C_CMD_REG);
 192                 spin_unlock_irqrestore(&bus->lock, flags);
 193
 194                 time_left = wait_for_completion_timeout(
 195                                 &bus->cmd_complete, bus->adap.timeout);
 196
 197                 spin_lock_irqsave(&bus->lock, flags);
 198                 if (time_left == 0)
 199                         goto reset_out;
 200                 else if (bus->cmd_err)
 201                         goto reset_out;
 202                 /* Recovery failed. */
 203                 else if (!(readl(bus->base + ASPEED_I2C_CMD_REG) &
 204                            ASPEED_I2CD_SCL_LINE_STS))
 205                         goto reset_out;
 206         /* Bus error. */
 207         } else {
 208                 dev_dbg(bus->dev, "SDA hung (state %x), attempting recovery\n",
 209                         command);
 210
 211                 reinit_completion(&bus->cmd_complete);
 212                 /* Writes 1 to 8 SCL clock cycles until SDA is released. */
 213                 writel(ASPEED_I2CD_BUS_RECOVER_CMD,
 214                        bus->base + ASPEED_I2C_CMD_REG);
 215                 spin_unlock_irqrestore(&bus->lock, flags);
 216
 217                 time_left = wait_for_completion_timeout(
 218                                 &bus->cmd_complete, bus->adap.timeout);
 219
 220                 spin_lock_irqsave(&bus->lock, flags);
 221                 if (time_left == 0)
 222                         goto reset_out;
 223                 else if (bus->cmd_err)
 224                         goto reset_out;
 225                 /* Recovery failed. */
 226                 else if (!(readl(bus->base + ASPEED_I2C_CMD_REG) &
 227                            ASPEED_I2CD_SDA_LINE_STS))
 228                         goto reset_out;
 229         }
 230
 231 out:
 232         spin_unlock_irqrestore(&bus->lock, flags);
 233
 234         return ret;
 235
 236 reset_out:
 237         spin_unlock_irqrestore(&bus->lock, flags);
 238
 239         return aspeed_i2c_reset(bus);
 240 }
 241
 242 #if IS_ENABLED(CONFIG_I2C_SLAVE)
 243 static u32 aspeed_i2c_slave_irq(struct aspeed_i2c_bus *bus, u32 irq_status)
 244 {
 245         u32 command, irq_handled = 0;
 246         struct i2c_client *slave = bus->slave;
 247         u8 value;
 248
 249         if (!slave)
 250                 return 0;
 251
 252         command = readl(bus->base + ASPEED_I2C_CMD_REG);
 253
 254         /* Slave was requested, restart state machine. */
 255         if (irq_status & ASPEED_I2CD_INTR_SLAVE_MATCH) {
 256                 irq_handled |= ASPEED_I2CD_INTR_SLAVE_MATCH;
 257                 bus->slave_state = ASPEED_I2C_SLAVE_START;
 258         }
 259
 260         /* Slave is not currently active, irq was for someone else. */
 261         if (bus->slave_state == ASPEED_I2C_SLAVE_INACTIVE)
 262                 return irq_handled;
 263
 264         dev_dbg(bus->dev, "slave irq status 0x%08x, cmd 0x%08x\n",
 265                 irq_status, command);
 266
 267         /* Slave was sent something. */
 268         if (irq_status & ASPEED_I2CD_INTR_RX_DONE) {
 269                 value = readl(bus->base + ASPEED_I2C_BYTE_BUF_REG) >> 8;
 270                 /* Handle address frame. */
 271                 if (bus->slave_state == ASPEED_I2C_SLAVE_START) {
 272                         if (value & 0x1)
 273                                 bus->slave_state =
 274                                                 ASPEED_I2C_SLAVE_READ_REQUESTED;
 275                         else
 276                                 bus->slave_state =
 277                                                 ASPEED_I2C_SLAVE_WRITE_REQUESTED;
 278                 }
 279                 irq_handled |= ASPEED_I2CD_INTR_RX_DONE;
 280         }
 281
 282         /* Slave was asked to stop. */
 283         if (irq_status & ASPEED_I2CD_INTR_NORMAL_STOP) {
 284                 irq_handled |= ASPEED_I2CD_INTR_NORMAL_STOP;
 285                 bus->slave_state = ASPEED_I2C_SLAVE_STOP;
 286         }
 287         if (irq_status & ASPEED_I2CD_INTR_TX_NAK &&
 288             bus->slave_state == ASPEED_I2C_SLAVE_READ_PROCESSED) {
 289                 irq_handled |= ASPEED_I2CD_INTR_TX_NAK;
 290                 bus->slave_state = ASPEED_I2C_SLAVE_STOP;
 291         }
 292
 293         switch (bus->slave_state) {
 294         case ASPEED_I2C_SLAVE_READ_REQUESTED:
 295                 if (unlikely(irq_status & ASPEED_I2CD_INTR_TX_ACK))
 296                         dev_err(bus->dev, "Unexpected ACK on read request.\n");
 297                 bus->slave_state = ASPEED_I2C_SLAVE_READ_PROCESSED;
 298                 i2c_slave_event(slave, I2C_SLAVE_READ_REQUESTED, &value);
 299                 writel(value, bus->base + ASPEED_I2C_BYTE_BUF_REG);
 300                 writel(ASPEED_I2CD_S_TX_CMD, bus->base + ASPEED_I2C_CMD_REG);
 301                 break;
 302         case ASPEED_I2C_SLAVE_READ_PROCESSED:
 303                 if (unlikely(!(irq_status & ASPEED_I2CD_INTR_TX_ACK))) {
 304                         dev_err(bus->dev,
 305                                 "Expected ACK after processed read.\n");
 306                         break;
 307                 }
 308                 irq_handled |= ASPEED_I2CD_INTR_TX_ACK;
 309                 i2c_slave_event(slave, I2C_SLAVE_READ_PROCESSED, &value);
 310                 writel(value, bus->base + ASPEED_I2C_BYTE_BUF_REG);
 311                 writel(ASPEED_I2CD_S_TX_CMD, bus->base + ASPEED_I2C_CMD_REG);
 312                 break;
 313         case ASPEED_I2C_SLAVE_WRITE_REQUESTED:
 314                 bus->slave_state = ASPEED_I2C_SLAVE_WRITE_RECEIVED;
 315                 i2c_slave_event(slave, I2C_SLAVE_WRITE_REQUESTED, &value);
 316                 break;
 317         case ASPEED_I2C_SLAVE_WRITE_RECEIVED:
 318                 i2c_slave_event(slave, I2C_SLAVE_WRITE_RECEIVED, &value);
 319                 break;
 320         case ASPEED_I2C_SLAVE_STOP:
 321                 i2c_slave_event(slave, I2C_SLAVE_STOP, &value);
 322                 bus->slave_state = ASPEED_I2C_SLAVE_INACTIVE;
 323                 break;
 324         case ASPEED_I2C_SLAVE_START:
 325                 /* Slave was just started. Waiting for the next event. */;
 326                 break;
 327         default:
 328                 dev_err(bus->dev, "unknown slave_state: %d\n",
 329                         bus->slave_state);
 330                 bus->slave_state = ASPEED_I2C_SLAVE_INACTIVE;
 331                 break;
 332         }
 333
 334         return irq_handled;
 335 }
 336 #endif /* CONFIG_I2C_SLAVE */
 337
 338 /* precondition: bus.lock has been acquired. */
 339 static void aspeed_i2c_do_start(struct aspeed_i2c_bus *bus)
 340 {
 341         u32 command = ASPEED_I2CD_M_START_CMD | ASPEED_I2CD_M_TX_CMD;
 342         struct i2c_msg *msg = &bus->msgs[bus->msgs_index];
 343         u8 slave_addr = i2c_8bit_addr_from_msg(msg);
 344
 345 #if IS_ENABLED(CONFIG_I2C_SLAVE)
 346         /*
 347          * If it's requested in the middle of a slave session, set the master
 348          * state to 'pending' then H/W will continue handling this master
 349          * command when the bus comes back to the idle state.
 350          */
 351         if (bus->slave_state != ASPEED_I2C_SLAVE_INACTIVE) {
 352                 bus->master_state = ASPEED_I2C_MASTER_PENDING;
 353                 return;
 354         }
 355 #endif /* CONFIG_I2C_SLAVE */
 356
 357         bus->master_state = ASPEED_I2C_MASTER_START;
 358         bus->buf_index = 0;
 359
 360         if (msg->flags & I2C_M_RD) {
 361                 command |= ASPEED_I2CD_M_RX_CMD;
 362                 /* Need to let the hardware know to NACK after RX. */
 363                 if (msg->len == 1 && !(msg->flags & I2C_M_RECV_LEN))
 364                         command |= ASPEED_I2CD_M_S_RX_CMD_LAST;
 365         }
 366
 367         writel(slave_addr, bus->base + ASPEED_I2C_BYTE_BUF_REG);
 368         writel(command, bus->base + ASPEED_I2C_CMD_REG);
 369 }
 370
 371 /* precondition: bus.lock has been acquired. */
 372 static void aspeed_i2c_do_stop(struct aspeed_i2c_bus *bus)
 373 {
 374         bus->master_state = ASPEED_I2C_MASTER_STOP;
 375         writel(ASPEED_I2CD_M_STOP_CMD, bus->base + ASPEED_I2C_CMD_REG);
 376 }
 377
 378 /* precondition: bus.lock has been acquired. */
 379 static void aspeed_i2c_next_msg_or_stop(struct aspeed_i2c_bus *bus)
 380 {
 381         if (bus->msgs_index + 1 < bus->msgs_count) {
 382                 bus->msgs_index++;
 383                 aspeed_i2c_do_start(bus);
 384         } else {
 385                 aspeed_i2c_do_stop(bus);
 386         }
 387 }
 388
 389 static int aspeed_i2c_is_irq_error(u32 irq_status)
 390 {
 391         if (irq_status & ASPEED_I2CD_INTR_ARBIT_LOSS)
 392                 return -EAGAIN;
 393         if (irq_status & (ASPEED_I2CD_INTR_SDA_DL_TIMEOUT |
 394                           ASPEED_I2CD_INTR_SCL_TIMEOUT))
 395                 return -EBUSY;
 396         if (irq_status & (ASPEED_I2CD_INTR_ABNORMAL))
 397                 return -EPROTO;
 398
 399         return 0;
 400 }
 401
 402 static u32 aspeed_i2c_master_irq(struct aspeed_i2c_bus *bus, u32 irq_status)
 403 {
 404         u32 irq_handled = 0, command = 0;
 405         struct i2c_msg *msg;
 406         u8 recv_byte;
 407         int ret;
 408
 409         if (irq_status & ASPEED_I2CD_INTR_BUS_RECOVER_DONE) {
 410                 bus->master_state = ASPEED_I2C_MASTER_INACTIVE;
 411                 irq_handled |= ASPEED_I2CD_INTR_BUS_RECOVER_DONE;
 412                 goto out_complete;
 413         }
 414
 415         /*
 416          * We encountered an interrupt that reports an error: the hardware
 417          * should clear the command queue effectively taking us back to the
 418          * INACTIVE state.
 419          */
 420         ret = aspeed_i2c_is_irq_error(irq_status);
 421         if (ret) {
 422                 dev_dbg(bus->dev, "received error interrupt: 0x%08x\n",
 423                         irq_status);
 424                 irq_handled |= (irq_status & ASPEED_I2CD_INTR_MASTER_ERRORS);
 425                 if (bus->master_state != ASPEED_I2C_MASTER_INACTIVE) {
 426                         bus->cmd_err = ret;
 427                         bus->master_state = ASPEED_I2C_MASTER_INACTIVE;
 428                         goto out_complete;
 429                 }
 430         }
 431
 432         /* Master is not currently active, irq was for someone else. */
 433         if (bus->master_state == ASPEED_I2C_MASTER_INACTIVE ||
 434             bus->master_state == ASPEED_I2C_MASTER_PENDING)
 435                 goto out_no_complete;
 436
 437         /* We are in an invalid state; reset bus to a known state. */
 438         if (!bus->msgs) {
 439                 dev_err(bus->dev, "bus in unknown state. irq_status: 0x%x\n",
 440                         irq_status);
 441                 bus->cmd_err = -EIO;
 442                 if (bus->master_state != ASPEED_I2C_MASTER_STOP &&
 443                     bus->master_state != ASPEED_I2C_MASTER_INACTIVE)
 444                         aspeed_i2c_do_stop(bus);
 445                 goto out_no_complete;
 446         }
 447         msg = &bus->msgs[bus->msgs_index];
 448
 449         /*
 450          * START is a special case because we still have to handle a subsequent
 451          * TX or RX immediately after we handle it, so we handle it here and
 452          * then update the state and handle the new state below.
 453          */
 454         if (bus->master_state == ASPEED_I2C_MASTER_START) {
 455 #if IS_ENABLED(CONFIG_I2C_SLAVE)
 456                 /*
 457                  * If a peer master starts a xfer immediately after it queues a
 458                  * master command, clear the queued master command and change
 459                  * its state to 'pending'. To simplify handling of pending
 460                  * cases, it uses S/W solution instead of H/W command queue
 461                  * handling.
 462                  */
 463                 if (unlikely(irq_status & ASPEED_I2CD_INTR_SLAVE_MATCH)) {
 464                         writel(readl(bus->base + ASPEED_I2C_CMD_REG) &
 465                                 ~ASPEED_I2CD_MASTER_CMDS_MASK,
 466                                bus->base + ASPEED_I2C_CMD_REG);
 467                         bus->master_state = ASPEED_I2C_MASTER_PENDING;
 468                         dev_dbg(bus->dev,
 469                                 "master goes pending due to a slave start\n");
 470                         goto out_no_complete;
 471                 }
 472 #endif /* CONFIG_I2C_SLAVE */
 473                 if (unlikely(!(irq_status & ASPEED_I2CD_INTR_TX_ACK))) {
 474                         if (unlikely(!(irq_status & ASPEED_I2CD_INTR_TX_NAK))) {
 475                                 bus->cmd_err = -ENXIO;
 476                                 bus->master_state = ASPEED_I2C_MASTER_INACTIVE;
 477                                 goto out_complete;
 478                         }
 479                         pr_devel("no slave present at %02x\n", msg->addr);
 480                         irq_handled |= ASPEED_I2CD_INTR_TX_NAK;
 481                         bus->cmd_err = -ENXIO;
 482                         aspeed_i2c_do_stop(bus);
 483                         goto out_no_complete;
 484                 }
 485                 irq_handled |= ASPEED_I2CD_INTR_TX_ACK;
 486                 if (msg->len == 0) { /* SMBUS_QUICK */
 487                         aspeed_i2c_do_stop(bus);
 488                         goto out_no_complete;
 489                 }
 490                 if (msg->flags & I2C_M_RD)
 491                         bus->master_state = ASPEED_I2C_MASTER_RX_FIRST;
 492                 else
 493                         bus->master_state = ASPEED_I2C_MASTER_TX_FIRST;
 494         }
 495
 496         switch (bus->master_state) {
 497         case ASPEED_I2C_MASTER_TX:
 498                 if (unlikely(irq_status & ASPEED_I2CD_INTR_TX_NAK)) {
 499                         dev_dbg(bus->dev, "slave NACKed TX\n");
 500                         irq_handled |= ASPEED_I2CD_INTR_TX_NAK;
 501                         goto error_and_stop;
 502                 } else if (unlikely(!(irq_status & ASPEED_I2CD_INTR_TX_ACK))) {
 503                         dev_err(bus->dev, "slave failed to ACK TX\n");
 504                         goto error_and_stop;
 505                 }
 506                 irq_handled |= ASPEED_I2CD_INTR_TX_ACK;
 507                 /* fall through */
 508         case ASPEED_I2C_MASTER_TX_FIRST:
 509                 if (bus->buf_index < msg->len) {
 510                         bus->master_state = ASPEED_I2C_MASTER_TX;
 511                         writel(msg->buf[bus->buf_index++],
 512                                bus->base + ASPEED_I2C_BYTE_BUF_REG);
 513                         writel(ASPEED_I2CD_M_TX_CMD,
 514                                bus->base + ASPEED_I2C_CMD_REG);
 515                 } else {
 516                         aspeed_i2c_next_msg_or_stop(bus);
 517                 }
 518                 goto out_no_complete;
 519         case ASPEED_I2C_MASTER_RX_FIRST:
 520                 /* RX may not have completed yet (only address cycle) */
 521                 if (!(irq_status & ASPEED_I2CD_INTR_RX_DONE))
 522                         goto out_no_complete;
 523                 /* fall through */
 524         case ASPEED_I2C_MASTER_RX:
 525                 if (unlikely(!(irq_status & ASPEED_I2CD_INTR_RX_DONE))) {
 526                         dev_err(bus->dev, "master failed to RX\n");
 527                         goto error_and_stop;
 528                 }
 529                 irq_handled |= ASPEED_I2CD_INTR_RX_DONE;
 530
 531                 recv_byte = readl(bus->base + ASPEED_I2C_BYTE_BUF_REG) >> 8;
 532                 msg->buf[bus->buf_index++] = recv_byte;
 533
 534                 if (msg->flags & I2C_M_RECV_LEN) {
 535                         if (unlikely(recv_byte > I2C_SMBUS_BLOCK_MAX)) {
 536                                 bus->cmd_err = -EPROTO;
 537                                 aspeed_i2c_do_stop(bus);
 538                                 goto out_no_complete;
 539                         }
 540                         msg->len = recv_byte +
 541                                         ((msg->flags & I2C_CLIENT_PEC) ? 2 : 1);
 542                         msg->flags &= ~I2C_M_RECV_LEN;
 543                 }
 544
 545                 if (bus->buf_index < msg->len) {
 546                         bus->master_state = ASPEED_I2C_MASTER_RX;
 547                         command = ASPEED_I2CD_M_RX_CMD;
 548                         if (bus->buf_index + 1 == msg->len)
 549                                 command |= ASPEED_I2CD_M_S_RX_CMD_LAST;
 550                         writel(command, bus->base + ASPEED_I2C_CMD_REG);
 551                 } else {
 552                         aspeed_i2c_next_msg_or_stop(bus);
 553                 }
 554                 goto out_no_complete;
 555         case ASPEED_I2C_MASTER_STOP:
 556                 if (unlikely(!(irq_status & ASPEED_I2CD_INTR_NORMAL_STOP))) {
 557                         dev_err(bus->dev,
 558                                 "master failed to STOP. irq_status:0x%x\n",
 559                                 irq_status);
 560                         bus->cmd_err = -EIO;
 561                         /* Do not STOP as we have already tried. */
 562                 } else {
 563                         irq_handled |= ASPEED_I2CD_INTR_NORMAL_STOP;
 564                 }
 565
 566                 bus->master_state = ASPEED_I2C_MASTER_INACTIVE;
 567                 goto out_complete;
 568         case ASPEED_I2C_MASTER_INACTIVE:
 569                 dev_err(bus->dev,
 570                         "master received interrupt 0x%08x, but is inactive\n",
 571                         irq_status);
 572                 bus->cmd_err = -EIO;
 573                 /* Do not STOP as we should be inactive. */
 574                 goto out_complete;
 575         default:
 576                 WARN(1, "unknown master state\n");
 577                 bus->master_state = ASPEED_I2C_MASTER_INACTIVE;
 578                 bus->cmd_err = -EINVAL;
 579                 goto out_complete;
 580         }
 581 error_and_stop:
 582         bus->cmd_err = -EIO;
 583         aspeed_i2c_do_stop(bus);
 584         goto out_no_complete;
 585 out_complete:
 586         bus->msgs = NULL;
 587         if (bus->cmd_err)
 588                 bus->master_xfer_result = bus->cmd_err;
 589         else
 590                 bus->master_xfer_result = bus->msgs_index + 1;
 591         complete(&bus->cmd_complete);
 592 out_no_complete:
 593         return irq_handled;
 594 }
 595
 596 static irqreturn_t aspeed_i2c_bus_irq(int irq, void *dev_id)
 597 {
 598         struct aspeed_i2c_bus *bus = dev_id;
 599         u32 irq_received, irq_remaining, irq_handled;
 600
 601         spin_lock(&bus->lock);
 602         irq_received = readl(bus->base + ASPEED_I2C_INTR_STS_REG);
 603         /* Ack all interrupts except for Rx done */
 604         writel(irq_received & ~ASPEED_I2CD_INTR_RX_DONE,
 605                bus->base + ASPEED_I2C_INTR_STS_REG);
 606         irq_remaining = irq_received;
 607
 608 #if IS_ENABLED(CONFIG_I2C_SLAVE)
 609         /*
 610          * In most cases, interrupt bits will be set one by one, although
 611          * multiple interrupt bits could be set at the same time. It's also
 612          * possible that master interrupt bits could be set along with slave
 613          * interrupt bits. Each case needs to be handled using corresponding
 614          * handlers depending on the current state.
 615          */
 616         if (bus->master_state != ASPEED_I2C_MASTER_INACTIVE &&
 617             bus->master_state != ASPEED_I2C_MASTER_PENDING) {
 618                 irq_handled = aspeed_i2c_master_irq(bus, irq_remaining);
 619                 irq_remaining &= ~irq_handled;
 620                 if (irq_remaining)
 621                         irq_handled |= aspeed_i2c_slave_irq(bus, irq_remaining);
 622         } else {
 623                 irq_handled = aspeed_i2c_slave_irq(bus, irq_remaining);
 624                 irq_remaining &= ~irq_handled;
 625                 if (irq_remaining)
 626                         irq_handled |= aspeed_i2c_master_irq(bus,
 627                                                              irq_remaining);
 628         }
 629
 630         /*
 631          * Start a pending master command at here if a slave operation is
 632          * completed.
 633          */
 634         if (bus->master_state == ASPEED_I2C_MASTER_PENDING &&
 635             bus->slave_state == ASPEED_I2C_SLAVE_INACTIVE)
 636                 aspeed_i2c_do_start(bus);
 637 #else
 638         irq_handled = aspeed_i2c_master_irq(bus, irq_remaining);
 639 #endif /* CONFIG_I2C_SLAVE */
 640
 641         irq_remaining &= ~irq_handled;
 642         if (irq_remaining)
 643                 dev_err(bus->dev,
 644                         "irq handled != irq. expected 0x%08x, but was 0x%08x\n",
 645                         irq_received, irq_handled);
 646
 647         /* Ack Rx done */
 648         if (irq_received & ASPEED_I2CD_INTR_RX_DONE)
 649                 writel(ASPEED_I2CD_INTR_RX_DONE,
 650                        bus->base + ASPEED_I2C_INTR_STS_REG);
 651         spin_unlock(&bus->lock);
 652         return irq_remaining ? IRQ_NONE : IRQ_HANDLED;
 653 }
 654
 655 static int aspeed_i2c_master_xfer(struct i2c_adapter *adap,
 656                                   struct i2c_msg *msgs, int num)
 657 {
 658         struct aspeed_i2c_bus *bus = i2c_get_adapdata(adap);
 659         unsigned long time_left, flags;
 660
 661         spin_lock_irqsave(&bus->lock, flags);
 662         bus->cmd_err = 0;
 663
 664         /* If bus is busy in a single master environment, attempt recovery. */
 665         if (!bus->multi_master &&
 666             (readl(bus->base + ASPEED_I2C_CMD_REG) &
 667              ASPEED_I2CD_BUS_BUSY_STS)) {
 668                 int ret;
 669
 670                 spin_unlock_irqrestore(&bus->lock, flags);
 671                 ret = aspeed_i2c_recover_bus(bus);
 672                 if (ret)
 673                         return ret;
 674                 spin_lock_irqsave(&bus->lock, flags);
 675         }
 676
 677         bus->cmd_err = 0;
 678         bus->msgs = msgs;
 679         bus->msgs_index = 0;
 680         bus->msgs_count = num;
 681
 682         reinit_completion(&bus->cmd_complete);
 683         aspeed_i2c_do_start(bus);
 684         spin_unlock_irqrestore(&bus->lock, flags);
 685
 686         time_left = wait_for_completion_timeout(&bus->cmd_complete,
 687                                                 bus->adap.timeout);
 688
 689         if (time_left == 0) {
 690                 /*
 691                  * If timed out and bus is still busy in a multi master
 692                  * environment, attempt recovery at here.
 693                  */
 694                 if (bus->multi_master &&
 695                     (readl(bus->base + ASPEED_I2C_CMD_REG) &
 696                      ASPEED_I2CD_BUS_BUSY_STS))
 697                         aspeed_i2c_recover_bus(bus);
 698
 699                 /*
 700                  * If timed out and the state is still pending, drop the pending
 701                  * master command.
 702                  */
 703                 spin_lock_irqsave(&bus->lock, flags);
 704                 if (bus->master_state == ASPEED_I2C_MASTER_PENDING)
 705                         bus->master_state = ASPEED_I2C_MASTER_INACTIVE;
 706                 spin_unlock_irqrestore(&bus->lock, flags);
 707
 708                 return -ETIMEDOUT;
 709         }
 710
 711         return bus->master_xfer_result;
 712 }
 713
 714 static u32 aspeed_i2c_functionality(struct i2c_adapter *adap)
 715 {
 716         return I2C_FUNC_I2C | I2C_FUNC_SMBUS_EMUL | I2C_FUNC_SMBUS_BLOCK_DATA;
 717 }
 718
 719 #if IS_ENABLED(CONFIG_I2C_SLAVE)
 720 /* precondition: bus.lock has been acquired. */
 721 static void __aspeed_i2c_reg_slave(struct aspeed_i2c_bus *bus, u16 slave_addr)
 722 {
 723         u32 addr_reg_val, func_ctrl_reg_val;
 724
 725         /* Set slave addr. */
 726         addr_reg_val = readl(bus->base + ASPEED_I2C_DEV_ADDR_REG);
 727         addr_reg_val &= ~ASPEED_I2CD_DEV_ADDR_MASK;
 728         addr_reg_val |= slave_addr & ASPEED_I2CD_DEV_ADDR_MASK;
 729         writel(addr_reg_val, bus->base + ASPEED_I2C_DEV_ADDR_REG);
 730
 731         /* Turn on slave mode. */
 732         func_ctrl_reg_val = readl(bus->base + ASPEED_I2C_FUN_CTRL_REG);
 733         func_ctrl_reg_val |= ASPEED_I2CD_SLAVE_EN;
 734         writel(func_ctrl_reg_val, bus->base + ASPEED_I2C_FUN_CTRL_REG);
 735 }
 736
 737 static int aspeed_i2c_reg_slave(struct i2c_client *client)
 738 {
 739         struct aspeed_i2c_bus *bus = i2c_get_adapdata(client->adapter);
 740         unsigned long flags;
 741
 742         spin_lock_irqsave(&bus->lock, flags);
 743         if (bus->slave) {
 744                 spin_unlock_irqrestore(&bus->lock, flags);
 745                 return -EINVAL;
 746         }
 747
 748         __aspeed_i2c_reg_slave(bus, client->addr);
 749
 750         bus->slave = client;
 751         bus->slave_state = ASPEED_I2C_SLAVE_INACTIVE;
 752         spin_unlock_irqrestore(&bus->lock, flags);
 753
 754         return 0;
 755 }
 756
 757 static int aspeed_i2c_unreg_slave(struct i2c_client *client)
 758 {
 759         struct aspeed_i2c_bus *bus = i2c_get_adapdata(client->adapter);
 760         u32 func_ctrl_reg_val;
 761         unsigned long flags;
 762
 763         spin_lock_irqsave(&bus->lock, flags);
 764         if (!bus->slave) {
 765                 spin_unlock_irqrestore(&bus->lock, flags);
 766                 return -EINVAL;
 767         }
 768
 769         /* Turn off slave mode. */
 770         func_ctrl_reg_val = readl(bus->base + ASPEED_I2C_FUN_CTRL_REG);
 771         func_ctrl_reg_val &= ~ASPEED_I2CD_SLAVE_EN;
 772         writel(func_ctrl_reg_val, bus->base + ASPEED_I2C_FUN_CTRL_REG);
 773
 774         bus->slave = NULL;
 775         spin_unlock_irqrestore(&bus->lock, flags);
 776
 777         return 0;
 778 }
 779 #endif /* CONFIG_I2C_SLAVE */
 780
 781 static const struct i2c_algorithm aspeed_i2c_algo = {
 782         .master_xfer    = aspeed_i2c_master_xfer,
 783         .functionality  = aspeed_i2c_functionality,
 784 #if IS_ENABLED(CONFIG_I2C_SLAVE)
 785         .reg_slave      = aspeed_i2c_reg_slave,
 786         .unreg_slave    = aspeed_i2c_unreg_slave,
 787 #endif /* CONFIG_I2C_SLAVE */
 788 };
 789
 790 static u32 aspeed_i2c_get_clk_reg_val(struct device *dev,
 791                                       u32 clk_high_low_mask,
 792                                       u32 divisor)
 793 {
 794         u32 base_clk_divisor, clk_high_low_max, clk_high, clk_low, tmp;
 795
 796         /*
 797          * SCL_high and SCL_low represent a value 1 greater than what is stored
 798          * since a zero divider is meaningless. Thus, the max value each can
 799          * store is every bit set + 1. Since SCL_high and SCL_low are added
 800          * together (see below), the max value of both is the max value of one
 801          * them times two.
 802          */
 803         clk_high_low_max = (clk_high_low_mask + 1) * 2;
 804
 805         /*
 806          * The actual clock frequency of SCL is:
 807          *      SCL_freq = APB_freq / (base_freq * (SCL_high + SCL_low))
 808          *               = APB_freq / divisor
 809          * where base_freq is a programmable clock divider; its value is
 810          *      base_freq = 1 << base_clk_divisor
 811          * SCL_high is the number of base_freq clock cycles that SCL stays high
 812          * and SCL_low is the number of base_freq clock cycles that SCL stays
 813          * low for a period of SCL.
 814          * The actual register has a minimum SCL_high and SCL_low minimum of 1;
 815          * thus, they start counting at zero. So
 816          *      SCL_high = clk_high + 1
 817          *      SCL_low  = clk_low + 1
 818          * Thus,
 819          *      SCL_freq = APB_freq /
 820          *              ((1 << base_clk_divisor) * (clk_high + 1 + clk_low + 1))
 821          * The documentation recommends clk_high >= clk_high_max / 2 and
 822          * clk_low >= clk_low_max / 2 - 1 when possible; this last constraint
 823          * gives us the following solution:
 824          */
 825         base_clk_divisor = divisor > clk_high_low_max ?
 826                         ilog2((divisor - 1) / clk_high_low_max) + 1 : 0;
 827
 828         if (base_clk_divisor > ASPEED_I2CD_TIME_BASE_DIVISOR_MASK) {
 829                 base_clk_divisor = ASPEED_I2CD_TIME_BASE_DIVISOR_MASK;
 830                 clk_low = clk_high_low_mask;
 831                 clk_high = clk_high_low_mask;
 832                 dev_err(dev,
 833                         "clamping clock divider: divider requested, %u, is greater than largest possible divider, %u.\n",
 834                         divisor, (1 << base_clk_divisor) * clk_high_low_max);
 835         } else {
 836                 tmp = (divisor + (1 << base_clk_divisor) - 1)
 837                                 >> base_clk_divisor;
 838                 clk_low = tmp / 2;
 839                 clk_high = tmp - clk_low;
 840
 841                 if (clk_high)
 842                         clk_high--;
 843
 844                 if (clk_low)
 845                         clk_low--;
 846         }
 847
 848
 849         return ((clk_high << ASPEED_I2CD_TIME_SCL_HIGH_SHIFT)
 850                 & ASPEED_I2CD_TIME_SCL_HIGH_MASK)
 851                         | ((clk_low << ASPEED_I2CD_TIME_SCL_LOW_SHIFT)
 852                            & ASPEED_I2CD_TIME_SCL_LOW_MASK)
 853                         | (base_clk_divisor
 854                            & ASPEED_I2CD_TIME_BASE_DIVISOR_MASK);
 855 }
 856
 857 static u32 aspeed_i2c_24xx_get_clk_reg_val(struct device *dev, u32 divisor)
 858 {
 859         /*
 860          * clk_high and clk_low are each 3 bits wide, so each can hold a max
 861          * value of 8 giving a clk_high_low_max of 16.
 862          */
 863         return aspeed_i2c_get_clk_reg_val(dev, GENMASK(2, 0), divisor);
 864 }
 865
 866 static u32 aspeed_i2c_25xx_get_clk_reg_val(struct device *dev, u32 divisor)
 867 {
 868         /*
 869          * clk_high and clk_low are each 4 bits wide, so each can hold a max
 870          * value of 16 giving a clk_high_low_max of 32.
 871          */
 872         return aspeed_i2c_get_clk_reg_val(dev, GENMASK(3, 0), divisor);
 873 }
 874
 875 /* precondition: bus.lock has been acquired. */
 876 static int aspeed_i2c_init_clk(struct aspeed_i2c_bus *bus)
 877 {
 878         u32 divisor, clk_reg_val;
 879
 880         divisor = DIV_ROUND_UP(bus->parent_clk_frequency, bus->bus_frequency);
 881         clk_reg_val = readl(bus->base + ASPEED_I2C_AC_TIMING_REG1);
 882         clk_reg_val &= (ASPEED_I2CD_TIME_TBUF_MASK |
 883                         ASPEED_I2CD_TIME_THDSTA_MASK |
 884                         ASPEED_I2CD_TIME_TACST_MASK);
 885         clk_reg_val |= bus->get_clk_reg_val(bus->dev, divisor);
 886         writel(clk_reg_val, bus->base + ASPEED_I2C_AC_TIMING_REG1);
 887         writel(ASPEED_NO_TIMEOUT_CTRL, bus->base + ASPEED_I2C_AC_TIMING_REG2);
 888
 889         return 0;
 890 }
 891
 892 /* precondition: bus.lock has been acquired. */
 893 static int aspeed_i2c_init(struct aspeed_i2c_bus *bus,
 894                              struct platform_device *pdev)
 895 {
 896         u32 fun_ctrl_reg = ASPEED_I2CD_MASTER_EN;
 897         int ret;
 898
 899         /* Disable everything. */
 900         writel(0, bus->base + ASPEED_I2C_FUN_CTRL_REG);
 901
 902         ret = aspeed_i2c_init_clk(bus);
 903         if (ret < 0)
 904                 return ret;
 905
 906         if (of_property_read_bool(pdev->dev.of_node, "multi-master"))
 907                 bus->multi_master = true;
 908         else
 909                 fun_ctrl_reg |= ASPEED_I2CD_MULTI_MASTER_DIS;
 910
 911         /* Enable Master Mode */
 912         writel(readl(bus->base + ASPEED_I2C_FUN_CTRL_REG) | fun_ctrl_reg,
 913                bus->base + ASPEED_I2C_FUN_CTRL_REG);
 914
 915 #if IS_ENABLED(CONFIG_I2C_SLAVE)
 916         /* If slave has already been registered, re-enable it. */
 917         if (bus->slave)
 918                 __aspeed_i2c_reg_slave(bus, bus->slave->addr);
 919 #endif /* CONFIG_I2C_SLAVE */
 920
 921         /* Set interrupt generation of I2C controller */
 922         writel(ASPEED_I2CD_INTR_ALL, bus->base + ASPEED_I2C_INTR_CTRL_REG);
 923
 924         return 0;
 925 }
 926
 927 static int aspeed_i2c_reset(struct aspeed_i2c_bus *bus)
 928 {
 929         struct platform_device *pdev = to_platform_device(bus->dev);
 930         unsigned long flags;
 931         int ret;
 932
 933         spin_lock_irqsave(&bus->lock, flags);
 934
 935         /* Disable and ack all interrupts. */
 936         writel(0, bus->base + ASPEED_I2C_INTR_CTRL_REG);
 937         writel(0xffffffff, bus->base + ASPEED_I2C_INTR_STS_REG);
 938
 939         ret = aspeed_i2c_init(bus, pdev);
 940
 941         spin_unlock_irqrestore(&bus->lock, flags);
 942
 943         return ret;
 944 }
 945
 946 static const struct of_device_id aspeed_i2c_bus_of_table[] = {
 947         {
 948                 .compatible = "aspeed,ast2400-i2c-bus",
 949                 .data = aspeed_i2c_24xx_get_clk_reg_val,
 950         },
 951         {
 952                 .compatible = "aspeed,ast2500-i2c-bus",
 953                 .data = aspeed_i2c_25xx_get_clk_reg_val,
 954         },
 955         {
 956                 .compatible = "aspeed,ast2600-i2c-bus",
 957                 .data = aspeed_i2c_25xx_get_clk_reg_val,
 958         },
 959         { },
 960 };
 961 MODULE_DEVICE_TABLE(of, aspeed_i2c_bus_of_table);
 962
 963 static int aspeed_i2c_probe_bus(struct platform_device *pdev)
 964 {
 965         const struct of_device_id *match;
 966         struct aspeed_i2c_bus *bus;
 967         struct clk *parent_clk;
 968         struct resource *res;
 969         int irq, ret;
 970
 971         bus = devm_kzalloc(&pdev->dev, sizeof(*bus), GFP_KERNEL);
 972         if (!bus)
 973                 return -ENOMEM;
 974
 975         res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
 976         bus->base = devm_ioremap_resource(&pdev->dev, res);
 977         if (IS_ERR(bus->base))
 978                 return PTR_ERR(bus->base);
 979
 980         parent_clk = devm_clk_get(&pdev->dev, NULL);
 981         if (IS_ERR(parent_clk))
 982                 return PTR_ERR(parent_clk);
 983         bus->parent_clk_frequency = clk_get_rate(parent_clk);
 984         /* We just need the clock rate, we don't actually use the clk object. */
 985         devm_clk_put(&pdev->dev, parent_clk);
 986
 987         bus->rst = devm_reset_control_get_shared(&pdev->dev, NULL);
 988         if (IS_ERR(bus->rst)) {
 989                 dev_err(&pdev->dev,
 990                         "missing or invalid reset controller device tree entry\n");
 991                 return PTR_ERR(bus->rst);
 992         }
 993         reset_control_deassert(bus->rst);
 994
 995         ret = of_property_read_u32(pdev->dev.of_node,
 996                                    "bus-frequency", &bus->bus_frequency);
 997         if (ret < 0) {
 998                 dev_err(&pdev->dev,
 999                         "Could not read bus-frequency property\n");
1000                 bus->bus_frequency = I2C_MAX_STANDARD_MODE_FREQ;
1001         }
1002
1003         match = of_match_node(aspeed_i2c_bus_of_table, pdev->dev.of_node);
1004         if (!match)
1005                 bus->get_clk_reg_val = aspeed_i2c_24xx_get_clk_reg_val;
1006         else
1007                 bus->get_clk_reg_val = (u32 (*)(struct device *, u32))
1008                                 match->data;
1009
1010         /* Initialize the I2C adapter */
1011         spin_lock_init(&bus->lock);
1012         init_completion(&bus->cmd_complete);
1013         bus->adap.owner = THIS_MODULE;
1014         bus->adap.retries = 0;
1015         bus->adap.algo = &aspeed_i2c_algo;
1016         bus->adap.dev.parent = &pdev->dev;
1017         bus->adap.dev.of_node = pdev->dev.of_node;
1018         strlcpy(bus->adap.name, pdev->name, sizeof(bus->adap.name));
1019         i2c_set_adapdata(&bus->adap, bus);
1020
1021         bus->dev = &pdev->dev;
1022
1023         /* Clean up any left over interrupt state. */
1024         writel(0, bus->base + ASPEED_I2C_INTR_CTRL_REG);
1025         writel(0xffffffff, bus->base + ASPEED_I2C_INTR_STS_REG);
1026         /*
1027          * bus.lock does not need to be held because the interrupt handler has
1028          * not been enabled yet.
1029          */
1030         ret = aspeed_i2c_init(bus, pdev);
1031         if (ret < 0)
1032                 return ret;
1033
1034         irq = irq_of_parse_and_map(pdev->dev.of_node, 0);
1035         ret = devm_request_irq(&pdev->dev, irq, aspeed_i2c_bus_irq,
1036                                0, dev_name(&pdev->dev), bus);
1037         if (ret < 0)
1038                 return ret;
1039
1040         ret = i2c_add_adapter(&bus->adap);
1041         if (ret < 0)
1042                 return ret;
1043
1044         platform_set_drvdata(pdev, bus);
1045
1046         dev_info(bus->dev, "i2c bus %d registered, irq %d\n",
1047                  bus->adap.nr, irq);
1048
1049         return 0;
1050 }
1051
1052 static int aspeed_i2c_remove_bus(struct platform_device *pdev)
1053 {
1054         struct aspeed_i2c_bus *bus = platform_get_drvdata(pdev);
1055         unsigned long flags;
1056
1057         spin_lock_irqsave(&bus->lock, flags);
1058
1059         /* Disable everything. */
1060         writel(0, bus->base + ASPEED_I2C_FUN_CTRL_REG);
1061         writel(0, bus->base + ASPEED_I2C_INTR_CTRL_REG);
1062
1063         spin_unlock_irqrestore(&bus->lock, flags);
1064
1065         reset_control_assert(bus->rst);
1066
1067         i2c_del_adapter(&bus->adap);
1068
1069         return 0;
1070 }
1071
1072 static struct platform_driver aspeed_i2c_bus_driver = {
1073         .probe          = aspeed_i2c_probe_bus,
1074         .remove         = aspeed_i2c_remove_bus,
1075         .driver         = {
1076                 .name           = "aspeed-i2c-bus",
1077                 .of_match_table = aspeed_i2c_bus_of_table,
1078         },
1079 };
1080 module_platform_driver(aspeed_i2c_bus_driver);
1081
1082 MODULE_AUTHOR("Brendan Higgins <brendanhiggins@google.com>");
1083 MODULE_DESCRIPTION("Aspeed I2C Bus Driver");
1084 MODULE_LICENSE("GPL v2");