drivers/hwmon/thmc50.c

   1 // SPDX-License-Identifier: GPL-2.0-or-later
   2 /*
   3  * thmc50.c - Part of lm_sensors, Linux kernel modules for hardware
   4  *            monitoring
   5  * Copyright (C) 2007 Krzysztof Helt <krzysztof.h1@wp.pl>
   6  * Based on 2.4 driver by Frodo Looijaard <frodol@dds.nl> and
   7  * Philip Edelbrock <phil@netroedge.com>
   8  */
   9
  10 #include <linux/module.h>
  11 #include <linux/init.h>
  12 #include <linux/slab.h>
  13 #include <linux/i2c.h>
  14 #include <linux/hwmon.h>
  15 #include <linux/hwmon-sysfs.h>
  16 #include <linux/err.h>
  17 #include <linux/mutex.h>
  18 #include <linux/jiffies.h>
  19
  20 MODULE_LICENSE("GPL");
  21
  22 /* Addresses to scan */
  23 static const unsigned short normal_i2c[] = { 0x2c, 0x2d, 0x2e, I2C_CLIENT_END };
  24
  25 /* Insmod parameters */
  26 enum chips { thmc50, adm1022 };
  27
  28 static unsigned short adm1022_temp3[16];
  29 static unsigned int adm1022_temp3_num;
  30 module_param_array(adm1022_temp3, ushort, &adm1022_temp3_num, 0);
  31 MODULE_PARM_DESC(adm1022_temp3,
  32                  "List of adapter,address pairs to enable 3rd temperature (ADM1022 only)");
  33
  34 /* Many THMC50 constants specified below */
  35
  36 /* The THMC50 registers */
  37 #define THMC50_REG_CONF                         0x40
  38 #define THMC50_REG_COMPANY_ID                   0x3E
  39 #define THMC50_REG_DIE_CODE                     0x3F
  40 #define THMC50_REG_ANALOG_OUT                   0x19
  41 /*
  42  * The mirror status register cannot be used as
  43  * reading it does not clear alarms.
  44  */
  45 #define THMC50_REG_INTR                         0x41
  46
  47 static const u8 THMC50_REG_TEMP[] = { 0x27, 0x26, 0x20 };
  48 static const u8 THMC50_REG_TEMP_MIN[] = { 0x3A, 0x38, 0x2C };
  49 static const u8 THMC50_REG_TEMP_MAX[] = { 0x39, 0x37, 0x2B };
  50 static const u8 THMC50_REG_TEMP_CRITICAL[] = { 0x13, 0x14, 0x14 };
  51 static const u8 THMC50_REG_TEMP_DEFAULT[] = { 0x17, 0x18, 0x18 };
  52
  53 #define THMC50_REG_CONF_nFANOFF                 0x20
  54 #define THMC50_REG_CONF_PROGRAMMED              0x08
  55
  56 /* Each client has this additional data */
  57 struct thmc50_data {
  58         struct i2c_client *client;
  59         const struct attribute_group *groups[3];
  60
  61         struct mutex update_lock;
  62         enum chips type;
  63         unsigned long last_updated;     /* In jiffies */
  64         char has_temp3;         /* !=0 if it is ADM1022 in temp3 mode */
  65         char valid;             /* !=0 if following fields are valid */
  66
  67         /* Register values */
  68         s8 temp_input[3];
  69         s8 temp_max[3];
  70         s8 temp_min[3];
  71         s8 temp_critical[3];
  72         u8 analog_out;
  73         u8 alarms;
  74 };
  75
  76 static struct thmc50_data *thmc50_update_device(struct device *dev)
  77 {
  78         struct thmc50_data *data = dev_get_drvdata(dev);
  79         struct i2c_client *client = data->client;
  80         int timeout = HZ / 5 + (data->type == thmc50 ? HZ : 0);
  81
  82         mutex_lock(&data->update_lock);
  83
  84         if (time_after(jiffies, data->last_updated + timeout)
  85             || !data->valid) {
  86
  87                 int temps = data->has_temp3 ? 3 : 2;
  88                 int i;
  89                 int prog = i2c_smbus_read_byte_data(client, THMC50_REG_CONF);
  90
  91                 prog &= THMC50_REG_CONF_PROGRAMMED;
  92
  93                 for (i = 0; i < temps; i++) {
  94                         data->temp_input[i] = i2c_smbus_read_byte_data(client,
  95                                                 THMC50_REG_TEMP[i]);
  96                         data->temp_max[i] = i2c_smbus_read_byte_data(client,
  97                                                 THMC50_REG_TEMP_MAX[i]);
  98                         data->temp_min[i] = i2c_smbus_read_byte_data(client,
  99                                                 THMC50_REG_TEMP_MIN[i]);
 100                         data->temp_critical[i] =
 101                                 i2c_smbus_read_byte_data(client,
 102                                         prog ? THMC50_REG_TEMP_CRITICAL[i]
 103                                              : THMC50_REG_TEMP_DEFAULT[i]);
 104                 }
 105                 data->analog_out =
 106                     i2c_smbus_read_byte_data(client, THMC50_REG_ANALOG_OUT);
 107                 data->alarms =
 108                     i2c_smbus_read_byte_data(client, THMC50_REG_INTR);
 109                 data->last_updated = jiffies;
 110                 data->valid = 1;
 111         }
 112
 113         mutex_unlock(&data->update_lock);
 114
 115         return data;
 116 }
 117
 118 static ssize_t analog_out_show(struct device *dev,
 119                                struct device_attribute *attr, char *buf)
 120 {
 121         struct thmc50_data *data = thmc50_update_device(dev);
 122         return sprintf(buf, "%d\n", data->analog_out);
 123 }
 124
 125 static ssize_t analog_out_store(struct device *dev,
 126                                 struct device_attribute *attr,
 127                                 const char *buf, size_t count)
 128 {
 129         struct thmc50_data *data = dev_get_drvdata(dev);
 130         struct i2c_client *client = data->client;
 131         int config;
 132         unsigned long tmp;
 133         int err;
 134
 135         err = kstrtoul(buf, 10, &tmp);
 136         if (err)
 137                 return err;
 138
 139         mutex_lock(&data->update_lock);
 140         data->analog_out = clamp_val(tmp, 0, 255);
 141         i2c_smbus_write_byte_data(client, THMC50_REG_ANALOG_OUT,
 142                                   data->analog_out);
 143
 144         config = i2c_smbus_read_byte_data(client, THMC50_REG_CONF);
 145         if (data->analog_out == 0)
 146                 config &= ~THMC50_REG_CONF_nFANOFF;
 147         else
 148                 config |= THMC50_REG_CONF_nFANOFF;
 149         i2c_smbus_write_byte_data(client, THMC50_REG_CONF, config);
 150
 151         mutex_unlock(&data->update_lock);
 152         return count;
 153 }
 154
 155 /* There is only one PWM mode = DC */
 156 static ssize_t pwm_mode_show(struct device *dev,
 157                              struct device_attribute *attr, char *buf)
 158 {
 159         return sprintf(buf, "0\n");
 160 }
 161
 162 /* Temperatures */
 163 static ssize_t temp_show(struct device *dev, struct device_attribute *attr,
 164                          char *buf)
 165 {
 166         int nr = to_sensor_dev_attr(attr)->index;
 167         struct thmc50_data *data = thmc50_update_device(dev);
 168         return sprintf(buf, "%d\n", data->temp_input[nr] * 1000);
 169 }
 170
 171 static ssize_t temp_min_show(struct device *dev,
 172                              struct device_attribute *attr, char *buf)
 173 {
 174         int nr = to_sensor_dev_attr(attr)->index;
 175         struct thmc50_data *data = thmc50_update_device(dev);
 176         return sprintf(buf, "%d\n", data->temp_min[nr] * 1000);
 177 }
 178
 179 static ssize_t temp_min_store(struct device *dev,
 180                               struct device_attribute *attr, const char *buf,
 181                               size_t count)
 182 {
 183         int nr = to_sensor_dev_attr(attr)->index;
 184         struct thmc50_data *data = dev_get_drvdata(dev);
 185         struct i2c_client *client = data->client;
 186         long val;
 187         int err;
 188
 189         err = kstrtol(buf, 10, &val);
 190         if (err)
 191                 return err;
 192
 193         mutex_lock(&data->update_lock);
 194         data->temp_min[nr] = clamp_val(val / 1000, -128, 127);
 195         i2c_smbus_write_byte_data(client, THMC50_REG_TEMP_MIN[nr],
 196                                   data->temp_min[nr]);
 197         mutex_unlock(&data->update_lock);
 198         return count;
 199 }
 200
 201 static ssize_t temp_max_show(struct device *dev,
 202                              struct device_attribute *attr, char *buf)
 203 {
 204         int nr = to_sensor_dev_attr(attr)->index;
 205         struct thmc50_data *data = thmc50_update_device(dev);
 206         return sprintf(buf, "%d\n", data->temp_max[nr] * 1000);
 207 }
 208
 209 static ssize_t temp_max_store(struct device *dev,
 210                               struct device_attribute *attr, const char *buf,
 211                               size_t count)
 212 {
 213         int nr = to_sensor_dev_attr(attr)->index;
 214         struct thmc50_data *data = dev_get_drvdata(dev);
 215         struct i2c_client *client = data->client;
 216         long val;
 217         int err;
 218
 219         err = kstrtol(buf, 10, &val);
 220         if (err)
 221                 return err;
 222
 223         mutex_lock(&data->update_lock);
 224         data->temp_max[nr] = clamp_val(val / 1000, -128, 127);
 225         i2c_smbus_write_byte_data(client, THMC50_REG_TEMP_MAX[nr],
 226                                   data->temp_max[nr]);
 227         mutex_unlock(&data->update_lock);
 228         return count;
 229 }
 230
 231 static ssize_t temp_critical_show(struct device *dev,
 232                                   struct device_attribute *attr, char *buf)
 233 {
 234         int nr = to_sensor_dev_attr(attr)->index;
 235         struct thmc50_data *data = thmc50_update_device(dev);
 236         return sprintf(buf, "%d\n", data->temp_critical[nr] * 1000);
 237 }
 238
 239 static ssize_t alarm_show(struct device *dev, struct device_attribute *attr,
 240                           char *buf)
 241 {
 242         int index = to_sensor_dev_attr(attr)->index;
 243         struct thmc50_data *data = thmc50_update_device(dev);
 244
 245         return sprintf(buf, "%u\n", (data->alarms >> index) & 1);
 246 }
 247
 248 static SENSOR_DEVICE_ATTR_RO(temp1_input, temp, 0);
 249 static SENSOR_DEVICE_ATTR_RW(temp1_min, temp_min, 0);
 250 static SENSOR_DEVICE_ATTR_RW(temp1_max, temp_max, 0);
 251 static SENSOR_DEVICE_ATTR_RO(temp1_crit, temp_critical, 0);
 252 static SENSOR_DEVICE_ATTR_RO(temp2_input, temp, 1);
 253 static SENSOR_DEVICE_ATTR_RW(temp2_min, temp_min, 1);
 254 static SENSOR_DEVICE_ATTR_RW(temp2_max, temp_max, 1);
 255 static SENSOR_DEVICE_ATTR_RO(temp2_crit, temp_critical, 1);
 256 static SENSOR_DEVICE_ATTR_RO(temp3_input, temp, 2);
 257 static SENSOR_DEVICE_ATTR_RW(temp3_min, temp_min, 2);
 258 static SENSOR_DEVICE_ATTR_RW(temp3_max, temp_max, 2);
 259 static SENSOR_DEVICE_ATTR_RO(temp3_crit, temp_critical, 2);
 260
 261 static SENSOR_DEVICE_ATTR_RO(temp1_alarm, alarm, 0);
 262 static SENSOR_DEVICE_ATTR_RO(temp2_alarm, alarm, 5);
 263 static SENSOR_DEVICE_ATTR_RO(temp3_alarm, alarm, 1);
 264 static SENSOR_DEVICE_ATTR_RO(temp2_fault, alarm, 7);
 265 static SENSOR_DEVICE_ATTR_RO(temp3_fault, alarm, 2);
 266
 267 static SENSOR_DEVICE_ATTR_RW(pwm1, analog_out, 0);
 268 static SENSOR_DEVICE_ATTR_RO(pwm1_mode, pwm_mode, 0);
 269
 270 static struct attribute *thmc50_attributes[] = {
 271         &sensor_dev_attr_temp1_max.dev_attr.attr,
 272         &sensor_dev_attr_temp1_min.dev_attr.attr,
 273         &sensor_dev_attr_temp1_input.dev_attr.attr,
 274         &sensor_dev_attr_temp1_crit.dev_attr.attr,
 275         &sensor_dev_attr_temp1_alarm.dev_attr.attr,
 276         &sensor_dev_attr_temp2_max.dev_attr.attr,
 277         &sensor_dev_attr_temp2_min.dev_attr.attr,
 278         &sensor_dev_attr_temp2_input.dev_attr.attr,
 279         &sensor_dev_attr_temp2_crit.dev_attr.attr,
 280         &sensor_dev_attr_temp2_alarm.dev_attr.attr,
 281         &sensor_dev_attr_temp2_fault.dev_attr.attr,
 282         &sensor_dev_attr_pwm1.dev_attr.attr,
 283         &sensor_dev_attr_pwm1_mode.dev_attr.attr,
 284         NULL
 285 };
 286
 287 static const struct attribute_group thmc50_group = {
 288         .attrs = thmc50_attributes,
 289 };
 290
 291 /* for ADM1022 3rd temperature mode */
 292 static struct attribute *temp3_attributes[] = {
 293         &sensor_dev_attr_temp3_max.dev_attr.attr,
 294         &sensor_dev_attr_temp3_min.dev_attr.attr,
 295         &sensor_dev_attr_temp3_input.dev_attr.attr,
 296         &sensor_dev_attr_temp3_crit.dev_attr.attr,
 297         &sensor_dev_attr_temp3_alarm.dev_attr.attr,
 298         &sensor_dev_attr_temp3_fault.dev_attr.attr,
 299         NULL
 300 };
 301
 302 static const struct attribute_group temp3_group = {
 303         .attrs = temp3_attributes,
 304 };
 305
 306 /* Return 0 if detection is successful, -ENODEV otherwise */
 307 static int thmc50_detect(struct i2c_client *client,
 308                          struct i2c_board_info *info)
 309 {
 310         unsigned company;
 311         unsigned revision;
 312         unsigned config;
 313         struct i2c_adapter *adapter = client->adapter;
 314         const char *type_name;
 315
 316         if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA)) {
 317                 pr_debug("thmc50: detect failed, smbus byte data not supported!\n");
 318                 return -ENODEV;
 319         }
 320
 321         pr_debug("thmc50: Probing for THMC50 at 0x%2X on bus %d\n",
 322                  client->addr, i2c_adapter_id(client->adapter));
 323
 324         company = i2c_smbus_read_byte_data(client, THMC50_REG_COMPANY_ID);
 325         revision = i2c_smbus_read_byte_data(client, THMC50_REG_DIE_CODE);
 326         config = i2c_smbus_read_byte_data(client, THMC50_REG_CONF);
 327         if (revision < 0xc0 || (config & 0x10))
 328                 return -ENODEV;
 329
 330         if (company == 0x41) {
 331                 int id = i2c_adapter_id(client->adapter);
 332                 int i;
 333
 334                 type_name = "adm1022";
 335                 for (i = 0; i + 1 < adm1022_temp3_num; i += 2)
 336                         if (adm1022_temp3[i] == id &&
 337                             adm1022_temp3[i + 1] == client->addr) {
 338                                 /* enable 2nd remote temp */
 339                                 config |= (1 << 7);
 340                                 i2c_smbus_write_byte_data(client,
 341                                                           THMC50_REG_CONF,
 342                                                           config);
 343                                 break;
 344                         }
 345         } else if (company == 0x49) {
 346                 type_name = "thmc50";
 347         } else {
 348                 pr_debug("thmc50: Detection of THMC50/ADM1022 failed\n");
 349                 return -ENODEV;
 350         }
 351
 352         pr_debug("thmc50: Detected %s (version %x, revision %x)\n",
 353                  type_name, (revision >> 4) - 0xc, revision & 0xf);
 354
 355         strlcpy(info->type, type_name, I2C_NAME_SIZE);
 356
 357         return 0;
 358 }
 359
 360 static void thmc50_init_client(struct thmc50_data *data)
 361 {
 362         struct i2c_client *client = data->client;
 363         int config;
 364
 365         data->analog_out = i2c_smbus_read_byte_data(client,
 366                                                     THMC50_REG_ANALOG_OUT);
 367         /* set up to at least 1 */
 368         if (data->analog_out == 0) {
 369                 data->analog_out = 1;
 370                 i2c_smbus_write_byte_data(client, THMC50_REG_ANALOG_OUT,
 371                                           data->analog_out);
 372         }
 373         config = i2c_smbus_read_byte_data(client, THMC50_REG_CONF);
 374         config |= 0x1;  /* start the chip if it is in standby mode */
 375         if (data->type == adm1022 && (config & (1 << 7)))
 376                 data->has_temp3 = 1;
 377         i2c_smbus_write_byte_data(client, THMC50_REG_CONF, config);
 378 }
 379
 380 static const struct i2c_device_id thmc50_id[];
 381
 382 static int thmc50_probe(struct i2c_client *client)
 383 {
 384         struct device *dev = &client->dev;
 385         struct thmc50_data *data;
 386         struct device *hwmon_dev;
 387         int idx = 0;
 388
 389         data = devm_kzalloc(dev, sizeof(struct thmc50_data), GFP_KERNEL);
 390         if (!data)
 391                 return -ENOMEM;
 392
 393         data->client = client;
 394         data->type = i2c_match_id(thmc50_id, client)->driver_data;
 395         mutex_init(&data->update_lock);
 396
 397         thmc50_init_client(data);
 398
 399         /* sysfs hooks */
 400         data->groups[idx++] = &thmc50_group;
 401
 402         /* Register additional ADM1022 sysfs hooks */
 403         if (data->has_temp3)
 404                 data->groups[idx++] = &temp3_group;
 405
 406         hwmon_dev = devm_hwmon_device_register_with_groups(dev, client->name,
 407                                                            data, data->groups);
 408         return PTR_ERR_OR_ZERO(hwmon_dev);
 409 }
 410
 411 static const struct i2c_device_id thmc50_id[] = {
 412         { "adm1022", adm1022 },
 413         { "thmc50", thmc50 },
 414         { }
 415 };
 416 MODULE_DEVICE_TABLE(i2c, thmc50_id);
 417
 418 static struct i2c_driver thmc50_driver = {
 419         .class = I2C_CLASS_HWMON,
 420         .driver = {
 421                 .name = "thmc50",
 422         },
 423         .probe_new = thmc50_probe,
 424         .id_table = thmc50_id,
 425         .detect = thmc50_detect,
 426         .address_list = normal_i2c,
 427 };
 428
 429 module_i2c_driver(thmc50_driver);
 430
 431 MODULE_AUTHOR("Krzysztof Helt <krzysztof.h1@wp.pl>");
 432 MODULE_DESCRIPTION("THMC50 driver");