drivers/hwmon/pmbus/tps53679.c

   1 // SPDX-License-Identifier: GPL-2.0-or-later
   2 /*
   3  * Hardware monitoring driver for Texas Instruments TPS53679
   4  *
   5  * Copyright (c) 2017 Mellanox Technologies. All rights reserved.
   6  * Copyright (c) 2017 Vadim Pasternak <vadimp@mellanox.com>
   7  */
   8
   9 #include <linux/bits.h>
  10 #include <linux/err.h>
  11 #include <linux/i2c.h>
  12 #include <linux/init.h>
  13 #include <linux/kernel.h>
  14 #include <linux/module.h>
  15 #include <linux/of_device.h>
  16 #include "pmbus.h"
  17
  18 enum chips {
  19         tps53647, tps53667, tps53676, tps53679, tps53681, tps53688
  20 };
  21
  22 #define TPS53647_PAGE_NUM               1
  23
  24 #define TPS53676_USER_DATA_03           0xb3
  25 #define TPS53676_MAX_PHASES             7
  26
  27 #define TPS53679_PROT_VR12_5MV          0x01 /* VR12.0 mode, 5-mV DAC */
  28 #define TPS53679_PROT_VR12_5_10MV       0x02 /* VR12.5 mode, 10-mV DAC */
  29 #define TPS53679_PROT_VR13_10MV         0x04 /* VR13.0 mode, 10-mV DAC */
  30 #define TPS53679_PROT_IMVP8_5MV         0x05 /* IMVP8 mode, 5-mV DAC */
  31 #define TPS53679_PROT_VR13_5MV          0x07 /* VR13.0 mode, 5-mV DAC */
  32 #define TPS53679_PAGE_NUM               2
  33
  34 #define TPS53681_DEVICE_ID              0x81
  35
  36 #define TPS53681_PMBUS_REVISION         0x33
  37
  38 #define TPS53681_MFR_SPECIFIC_20        0xe4    /* Number of phases, per page */
  39
  40 static const struct i2c_device_id tps53679_id[];
  41
  42 static int tps53679_identify_mode(struct i2c_client *client,
  43                                   struct pmbus_driver_info *info)
  44 {
  45         u8 vout_params;
  46         int i, ret;
  47
  48         for (i = 0; i < info->pages; i++) {
  49                 /* Read the register with VOUT scaling value.*/
  50                 ret = pmbus_read_byte_data(client, i, PMBUS_VOUT_MODE);
  51                 if (ret < 0)
  52                         return ret;
  53
  54                 vout_params = ret & GENMASK(4, 0);
  55
  56                 switch (vout_params) {
  57                 case TPS53679_PROT_VR13_10MV:
  58                 case TPS53679_PROT_VR12_5_10MV:
  59                         info->vrm_version[i] = vr13;
  60                         break;
  61                 case TPS53679_PROT_VR13_5MV:
  62                 case TPS53679_PROT_VR12_5MV:
  63                 case TPS53679_PROT_IMVP8_5MV:
  64                         info->vrm_version[i] = vr12;
  65                         break;
  66                 default:
  67                         return -EINVAL;
  68                 }
  69         }
  70
  71         return 0;
  72 }
  73
  74 static int tps53679_identify_phases(struct i2c_client *client,
  75                                     struct pmbus_driver_info *info)
  76 {
  77         int ret;
  78
  79         /* On TPS53681, only channel A provides per-phase output current */
  80         ret = pmbus_read_byte_data(client, 0, TPS53681_MFR_SPECIFIC_20);
  81         if (ret < 0)
  82                 return ret;
  83         info->phases[0] = (ret & 0x07) + 1;
  84
  85         return 0;
  86 }
  87
  88 static int tps53679_identify_chip(struct i2c_client *client,
  89                                   u8 revision, u16 id)
  90 {
  91         u8 buf[I2C_SMBUS_BLOCK_MAX];
  92         int ret;
  93
  94         ret = pmbus_read_byte_data(client, 0, PMBUS_REVISION);
  95         if (ret < 0)
  96                 return ret;
  97         if (ret != revision) {
  98                 dev_err(&client->dev, "Unexpected PMBus revision 0x%x\n", ret);
  99                 return -ENODEV;
 100         }
 101
 102         ret = i2c_smbus_read_block_data(client, PMBUS_IC_DEVICE_ID, buf);
 103         if (ret < 0)
 104                 return ret;
 105         if (ret != 1 || buf[0] != id) {
 106                 dev_err(&client->dev, "Unexpected device ID 0x%x\n", buf[0]);
 107                 return -ENODEV;
 108         }
 109         return 0;
 110 }
 111
 112 /*
 113  * Common identification function for chips with multi-phase support.
 114  * Since those chips have special configuration registers, we want to have
 115  * some level of reassurance that we are really talking with the chip
 116  * being probed. Check PMBus revision and chip ID.
 117  */
 118 static int tps53679_identify_multiphase(struct i2c_client *client,
 119                                         struct pmbus_driver_info *info,
 120                                         int pmbus_rev, int device_id)
 121 {
 122         int ret;
 123
 124         ret = tps53679_identify_chip(client, pmbus_rev, device_id);
 125         if (ret < 0)
 126                 return ret;
 127
 128         ret = tps53679_identify_mode(client, info);
 129         if (ret < 0)
 130                 return ret;
 131
 132         return tps53679_identify_phases(client, info);
 133 }
 134
 135 static int tps53679_identify(struct i2c_client *client,
 136                              struct pmbus_driver_info *info)
 137 {
 138         return tps53679_identify_mode(client, info);
 139 }
 140
 141 static int tps53681_identify(struct i2c_client *client,
 142                              struct pmbus_driver_info *info)
 143 {
 144         return tps53679_identify_multiphase(client, info,
 145                                             TPS53681_PMBUS_REVISION,
 146                                             TPS53681_DEVICE_ID);
 147 }
 148
 149 static int tps53676_identify(struct i2c_client *client,
 150                              struct pmbus_driver_info *info)
 151 {
 152         u8 buf[I2C_SMBUS_BLOCK_MAX];
 153         int phases_a = 0, phases_b = 0;
 154         int i, ret;
 155
 156         ret = i2c_smbus_read_block_data(client, PMBUS_IC_DEVICE_ID, buf);
 157         if (ret < 0)
 158                 return ret;
 159         if (strncmp("TI\x53\x67\x60", buf, 5)) {
 160                 dev_err(&client->dev, "Unexpected device ID: %s\n", buf);
 161                 return -ENODEV;
 162         }
 163
 164         ret = i2c_smbus_read_block_data(client, TPS53676_USER_DATA_03, buf);
 165         if (ret < 0)
 166                 return ret;
 167         if (ret != 24)
 168                 return -EIO;
 169         for (i = 0; i < 2 * TPS53676_MAX_PHASES; i += 2) {
 170                 if (buf[i + 1] & 0x80) {
 171                         if (buf[i] & 0x08)
 172                                 phases_b++;
 173                         else
 174                                 phases_a++;
 175                 }
 176         }
 177
 178         info->format[PSC_VOLTAGE_OUT] = linear;
 179         info->pages = 1;
 180         info->phases[0] = phases_a;
 181         if (phases_b > 0) {
 182                 info->pages = 2;
 183                 info->phases[1] = phases_b;
 184         }
 185         return 0;
 186 }
 187
 188 static int tps53681_read_word_data(struct i2c_client *client, int page,
 189                                    int phase, int reg)
 190 {
 191         /*
 192          * For reading the total output current (READ_IOUT) for all phases,
 193          * the chip datasheet is a bit vague. It says "PHASE must be set to
 194          * FFh to access all phases simultaneously. PHASE may also be set to
 195          * 80h readack (!) the total phase current".
 196          * Experiments show that the command does _not_ report the total
 197          * current for all phases if the phase is set to 0xff. Instead, it
 198          * appears to report the current of one of the phases. Override phase
 199          * parameter with 0x80 when reading the total output current on page 0.
 200          */
 201         if (reg == PMBUS_READ_IOUT && page == 0 && phase == 0xff)
 202                 return pmbus_read_word_data(client, page, 0x80, reg);
 203         return -ENODATA;
 204 }
 205
 206 static struct pmbus_driver_info tps53679_info = {
 207         .format[PSC_VOLTAGE_IN] = linear,
 208         .format[PSC_VOLTAGE_OUT] = vid,
 209         .format[PSC_TEMPERATURE] = linear,
 210         .format[PSC_CURRENT_OUT] = linear,
 211         .format[PSC_POWER] = linear,
 212         .func[0] = PMBUS_HAVE_VIN | PMBUS_HAVE_IIN | PMBUS_HAVE_PIN |
 213                 PMBUS_HAVE_STATUS_INPUT |
 214                 PMBUS_HAVE_VOUT | PMBUS_HAVE_STATUS_VOUT |
 215                 PMBUS_HAVE_IOUT | PMBUS_HAVE_STATUS_IOUT |
 216                 PMBUS_HAVE_TEMP | PMBUS_HAVE_STATUS_TEMP |
 217                 PMBUS_HAVE_POUT,
 218         .func[1] = PMBUS_HAVE_VOUT | PMBUS_HAVE_STATUS_VOUT |
 219                 PMBUS_HAVE_IOUT | PMBUS_HAVE_STATUS_IOUT |
 220                 PMBUS_HAVE_TEMP | PMBUS_HAVE_STATUS_TEMP |
 221                 PMBUS_HAVE_POUT,
 222         .pfunc[0] = PMBUS_HAVE_IOUT,
 223         .pfunc[1] = PMBUS_HAVE_IOUT,
 224         .pfunc[2] = PMBUS_HAVE_IOUT,
 225         .pfunc[3] = PMBUS_HAVE_IOUT,
 226         .pfunc[4] = PMBUS_HAVE_IOUT,
 227         .pfunc[5] = PMBUS_HAVE_IOUT,
 228         .pfunc[6] = PMBUS_HAVE_IOUT,
 229 };
 230
 231 static int tps53679_probe(struct i2c_client *client)
 232 {
 233         struct device *dev = &client->dev;
 234         struct pmbus_driver_info *info;
 235         enum chips chip_id;
 236
 237         if (dev->of_node)
 238                 chip_id = (enum chips)of_device_get_match_data(dev);
 239         else
 240                 chip_id = i2c_match_id(tps53679_id, client)->driver_data;
 241
 242         info = devm_kmemdup(dev, &tps53679_info, sizeof(*info), GFP_KERNEL);
 243         if (!info)
 244                 return -ENOMEM;
 245
 246         switch (chip_id) {
 247         case tps53647:
 248         case tps53667:
 249                 info->pages = TPS53647_PAGE_NUM;
 250                 info->identify = tps53679_identify;
 251                 break;
 252         case tps53676:
 253                 info->identify = tps53676_identify;
 254                 break;
 255         case tps53679:
 256         case tps53688:
 257                 info->pages = TPS53679_PAGE_NUM;
 258                 info->identify = tps53679_identify;
 259                 break;
 260         case tps53681:
 261                 info->pages = TPS53679_PAGE_NUM;
 262                 info->phases[0] = 6;
 263                 info->identify = tps53681_identify;
 264                 info->read_word_data = tps53681_read_word_data;
 265                 break;
 266         default:
 267                 return -ENODEV;
 268         }
 269
 270         return pmbus_do_probe(client, info);
 271 }
 272
 273 static const struct i2c_device_id tps53679_id[] = {
 274         {"bmr474", tps53676},
 275         {"tps53647", tps53647},
 276         {"tps53667", tps53667},
 277         {"tps53676", tps53676},
 278         {"tps53679", tps53679},
 279         {"tps53681", tps53681},
 280         {"tps53688", tps53688},
 281         {}
 282 };
 283
 284 MODULE_DEVICE_TABLE(i2c, tps53679_id);
 285
 286 static const struct of_device_id __maybe_unused tps53679_of_match[] = {
 287         {.compatible = "ti,tps53647", .data = (void *)tps53647},
 288         {.compatible = "ti,tps53667", .data = (void *)tps53667},
 289         {.compatible = "ti,tps53676", .data = (void *)tps53676},
 290         {.compatible = "ti,tps53679", .data = (void *)tps53679},
 291         {.compatible = "ti,tps53681", .data = (void *)tps53681},
 292         {.compatible = "ti,tps53688", .data = (void *)tps53688},
 293         {}
 294 };
 295 MODULE_DEVICE_TABLE(of, tps53679_of_match);
 296
 297 static struct i2c_driver tps53679_driver = {
 298         .driver = {
 299                 .name = "tps53679",
 300                 .of_match_table = of_match_ptr(tps53679_of_match),
 301         },
 302         .probe_new = tps53679_probe,
 303         .id_table = tps53679_id,
 304 };
 305
 306 module_i2c_driver(tps53679_driver);
 307
 308 MODULE_AUTHOR("Vadim Pasternak <vadimp@mellanox.com>");
 309 MODULE_DESCRIPTION("PMBus driver for Texas Instruments TPS53679");
 310 MODULE_LICENSE("GPL");
 311 MODULE_IMPORT_NS(PMBUS);