drivers/hv/ring_buffer.c

   1 // SPDX-License-Identifier: GPL-2.0-only
   2 /*
   3  *
   4  * Copyright (c) 2009, Microsoft Corporation.
   5  *
   6  * Authors:
   7  *   Haiyang Zhang <haiyangz@microsoft.com>
   8  *   Hank Janssen  <hjanssen@microsoft.com>
   9  *   K. Y. Srinivasan <kys@microsoft.com>
  10  */
  11 #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
  12
  13 #include <linux/kernel.h>
  14 #include <linux/mm.h>
  15 #include <linux/hyperv.h>
  16 #include <linux/uio.h>
  17 #include <linux/vmalloc.h>
  18 #include <linux/slab.h>
  19 #include <linux/prefetch.h>
  20
  21 #include "hyperv_vmbus.h"
  22
  23 #define VMBUS_PKT_TRAILER       8
  24
  25 /*
  26  * When we write to the ring buffer, check if the host needs to
  27  * be signaled. Here is the details of this protocol:
  28  *
  29  *      1. The host guarantees that while it is draining the
  30  *         ring buffer, it will set the interrupt_mask to
  31  *         indicate it does not need to be interrupted when
  32  *         new data is placed.
  33  *
  34  *      2. The host guarantees that it will completely drain
  35  *         the ring buffer before exiting the read loop. Further,
  36  *         once the ring buffer is empty, it will clear the
  37  *         interrupt_mask and re-check to see if new data has
  38  *         arrived.
  39  *
  40  * KYS: Oct. 30, 2016:
  41  * It looks like Windows hosts have logic to deal with DOS attacks that
  42  * can be triggered if it receives interrupts when it is not expecting
  43  * the interrupt. The host expects interrupts only when the ring
  44  * transitions from empty to non-empty (or full to non full on the guest
  45  * to host ring).
  46  * So, base the signaling decision solely on the ring state until the
  47  * host logic is fixed.
  48  */
  49
  50 static void hv_signal_on_write(u32 old_write, struct vmbus_channel *channel)
  51 {
  52         struct hv_ring_buffer_info *rbi = &channel->outbound;
  53
  54         virt_mb();
  55         if (READ_ONCE(rbi->ring_buffer->interrupt_mask))
  56                 return;
  57
  58         /* check interrupt_mask before read_index */
  59         virt_rmb();
  60         /*
  61          * This is the only case we need to signal when the
  62          * ring transitions from being empty to non-empty.
  63          */
  64         if (old_write == READ_ONCE(rbi->ring_buffer->read_index)) {
  65                 ++channel->intr_out_empty;
  66                 vmbus_setevent(channel);
  67         }
  68 }
  69
  70 /* Get the next write location for the specified ring buffer. */
  71 static inline u32
  72 hv_get_next_write_location(struct hv_ring_buffer_info *ring_info)
  73 {
  74         u32 next = ring_info->ring_buffer->write_index;
  75
  76         return next;
  77 }
  78
  79 /* Set the next write location for the specified ring buffer. */
  80 static inline void
  81 hv_set_next_write_location(struct hv_ring_buffer_info *ring_info,
  82                      u32 next_write_location)
  83 {
  84         ring_info->ring_buffer->write_index = next_write_location;
  85 }
  86
  87 /* Set the next read location for the specified ring buffer. */
  88 static inline void
  89 hv_set_next_read_location(struct hv_ring_buffer_info *ring_info,
  90                     u32 next_read_location)
  91 {
  92         ring_info->ring_buffer->read_index = next_read_location;
  93         ring_info->priv_read_index = next_read_location;
  94 }
  95
  96 /* Get the size of the ring buffer. */
  97 static inline u32
  98 hv_get_ring_buffersize(const struct hv_ring_buffer_info *ring_info)
  99 {
 100         return ring_info->ring_datasize;
 101 }
 102
 103 /* Get the read and write indices as u64 of the specified ring buffer. */
 104 static inline u64
 105 hv_get_ring_bufferindices(struct hv_ring_buffer_info *ring_info)
 106 {
 107         return (u64)ring_info->ring_buffer->write_index << 32;
 108 }
 109
 110 /*
 111  * Helper routine to copy from source to ring buffer.
 112  * Assume there is enough room. Handles wrap-around in dest case only!!
 113  */
 114 static u32 hv_copyto_ringbuffer(
 115         struct hv_ring_buffer_info      *ring_info,
 116         u32                             start_write_offset,
 117         const void                      *src,
 118         u32                             srclen)
 119 {
 120         void *ring_buffer = hv_get_ring_buffer(ring_info);
 121         u32 ring_buffer_size = hv_get_ring_buffersize(ring_info);
 122
 123         memcpy(ring_buffer + start_write_offset, src, srclen);
 124
 125         start_write_offset += srclen;
 126         if (start_write_offset >= ring_buffer_size)
 127                 start_write_offset -= ring_buffer_size;
 128
 129         return start_write_offset;
 130 }
 131
 132 /*
 133  *
 134  * hv_get_ringbuffer_availbytes()
 135  *
 136  * Get number of bytes available to read and to write to
 137  * for the specified ring buffer
 138  */
 139 static void
 140 hv_get_ringbuffer_availbytes(const struct hv_ring_buffer_info *rbi,
 141                              u32 *read, u32 *write)
 142 {
 143         u32 read_loc, write_loc, dsize;
 144
 145         /* Capture the read/write indices before they changed */
 146         read_loc = READ_ONCE(rbi->ring_buffer->read_index);
 147         write_loc = READ_ONCE(rbi->ring_buffer->write_index);
 148         dsize = rbi->ring_datasize;
 149
 150         *write = write_loc >= read_loc ? dsize - (write_loc - read_loc) :
 151                 read_loc - write_loc;
 152         *read = dsize - *write;
 153 }
 154
 155 /* Get various debug metrics for the specified ring buffer. */
 156 int hv_ringbuffer_get_debuginfo(struct hv_ring_buffer_info *ring_info,
 157                                 struct hv_ring_buffer_debug_info *debug_info)
 158 {
 159         u32 bytes_avail_towrite;
 160         u32 bytes_avail_toread;
 161
 162         mutex_lock(&ring_info->ring_buffer_mutex);
 163
 164         if (!ring_info->ring_buffer) {
 165                 mutex_unlock(&ring_info->ring_buffer_mutex);
 166                 return -EINVAL;
 167         }
 168
 169         hv_get_ringbuffer_availbytes(ring_info,
 170                                      &bytes_avail_toread,
 171                                      &bytes_avail_towrite);
 172         debug_info->bytes_avail_toread = bytes_avail_toread;
 173         debug_info->bytes_avail_towrite = bytes_avail_towrite;
 174         debug_info->current_read_index = ring_info->ring_buffer->read_index;
 175         debug_info->current_write_index = ring_info->ring_buffer->write_index;
 176         debug_info->current_interrupt_mask
 177                 = ring_info->ring_buffer->interrupt_mask;
 178         mutex_unlock(&ring_info->ring_buffer_mutex);
 179
 180         return 0;
 181 }
 182 EXPORT_SYMBOL_GPL(hv_ringbuffer_get_debuginfo);
 183
 184 /* Initialize a channel's ring buffer info mutex locks */
 185 void hv_ringbuffer_pre_init(struct vmbus_channel *channel)
 186 {
 187         mutex_init(&channel->inbound.ring_buffer_mutex);
 188         mutex_init(&channel->outbound.ring_buffer_mutex);
 189 }
 190
 191 /* Initialize the ring buffer. */
 192 int hv_ringbuffer_init(struct hv_ring_buffer_info *ring_info,
 193                        struct page *pages, u32 page_cnt)
 194 {
 195         int i;
 196         struct page **pages_wraparound;
 197
 198         BUILD_BUG_ON((sizeof(struct hv_ring_buffer) != PAGE_SIZE));
 199
 200         /*
 201          * First page holds struct hv_ring_buffer, do wraparound mapping for
 202          * the rest.
 203          */
 204         pages_wraparound = kcalloc(page_cnt * 2 - 1, sizeof(struct page *),
 205                                    GFP_KERNEL);
 206         if (!pages_wraparound)
 207                 return -ENOMEM;
 208
 209         pages_wraparound[0] = pages;
 210         for (i = 0; i < 2 * (page_cnt - 1); i++)
 211                 pages_wraparound[i + 1] = &pages[i % (page_cnt - 1) + 1];
 212
 213         ring_info->ring_buffer = (struct hv_ring_buffer *)
 214                 vmap(pages_wraparound, page_cnt * 2 - 1, VM_MAP, PAGE_KERNEL);
 215
 216         kfree(pages_wraparound);
 217
 218
 219         if (!ring_info->ring_buffer)
 220                 return -ENOMEM;
 221
 222         ring_info->ring_buffer->read_index =
 223                 ring_info->ring_buffer->write_index = 0;
 224
 225         /* Set the feature bit for enabling flow control. */
 226         ring_info->ring_buffer->feature_bits.value = 1;
 227
 228         ring_info->ring_size = page_cnt << PAGE_SHIFT;
 229         ring_info->ring_size_div10_reciprocal =
 230                 reciprocal_value(ring_info->ring_size / 10);
 231         ring_info->ring_datasize = ring_info->ring_size -
 232                 sizeof(struct hv_ring_buffer);
 233         ring_info->priv_read_index = 0;
 234
 235         spin_lock_init(&ring_info->ring_lock);
 236
 237         return 0;
 238 }
 239
 240 /* Cleanup the ring buffer. */
 241 void hv_ringbuffer_cleanup(struct hv_ring_buffer_info *ring_info)
 242 {
 243         mutex_lock(&ring_info->ring_buffer_mutex);
 244         vunmap(ring_info->ring_buffer);
 245         ring_info->ring_buffer = NULL;
 246         mutex_unlock(&ring_info->ring_buffer_mutex);
 247 }
 248
 249 /* Write to the ring buffer. */
 250 int hv_ringbuffer_write(struct vmbus_channel *channel,
 251                         const struct kvec *kv_list, u32 kv_count,
 252                         u64 requestid)
 253 {
 254         int i;
 255         u32 bytes_avail_towrite;
 256         u32 totalbytes_towrite = sizeof(u64);
 257         u32 next_write_location;
 258         u32 old_write;
 259         u64 prev_indices;
 260         unsigned long flags;
 261         struct hv_ring_buffer_info *outring_info = &channel->outbound;
 262         struct vmpacket_descriptor *desc = kv_list[0].iov_base;
 263         u64 rqst_id = VMBUS_NO_RQSTOR;
 264
 265         if (channel->rescind)
 266                 return -ENODEV;
 267
 268         for (i = 0; i < kv_count; i++)
 269                 totalbytes_towrite += kv_list[i].iov_len;
 270
 271         spin_lock_irqsave(&outring_info->ring_lock, flags);
 272
 273         bytes_avail_towrite = hv_get_bytes_to_write(outring_info);
 274
 275         /*
 276          * If there is only room for the packet, assume it is full.
 277          * Otherwise, the next time around, we think the ring buffer
 278          * is empty since the read index == write index.
 279          */
 280         if (bytes_avail_towrite <= totalbytes_towrite) {
 281                 ++channel->out_full_total;
 282
 283                 if (!channel->out_full_flag) {
 284                         ++channel->out_full_first;
 285                         channel->out_full_flag = true;
 286                 }
 287
 288                 spin_unlock_irqrestore(&outring_info->ring_lock, flags);
 289                 return -EAGAIN;
 290         }
 291
 292         channel->out_full_flag = false;
 293
 294         /* Write to the ring buffer */
 295         next_write_location = hv_get_next_write_location(outring_info);
 296
 297         old_write = next_write_location;
 298
 299         for (i = 0; i < kv_count; i++) {
 300                 next_write_location = hv_copyto_ringbuffer(outring_info,
 301                                                      next_write_location,
 302                                                      kv_list[i].iov_base,
 303                                                      kv_list[i].iov_len);
 304         }
 305
 306         /*
 307          * Allocate the request ID after the data has been copied into the
 308          * ring buffer.  Once this request ID is allocated, the completion
 309          * path could find the data and free it.
 310          */
 311
 312         if (desc->flags == VMBUS_DATA_PACKET_FLAG_COMPLETION_REQUESTED) {
 313                 rqst_id = vmbus_next_request_id(&channel->requestor, requestid);
 314                 if (rqst_id == VMBUS_RQST_ERROR) {
 315                         spin_unlock_irqrestore(&outring_info->ring_lock, flags);
 316                         pr_err("No request id available\n");
 317                         return -EAGAIN;
 318                 }
 319         }
 320         desc = hv_get_ring_buffer(outring_info) + old_write;
 321         desc->trans_id = (rqst_id == VMBUS_NO_RQSTOR) ? requestid : rqst_id;
 322
 323         /* Set previous packet start */
 324         prev_indices = hv_get_ring_bufferindices(outring_info);
 325
 326         next_write_location = hv_copyto_ringbuffer(outring_info,
 327                                              next_write_location,
 328                                              &prev_indices,
 329                                              sizeof(u64));
 330
 331         /* Issue a full memory barrier before updating the write index */
 332         virt_mb();
 333
 334         /* Now, update the write location */
 335         hv_set_next_write_location(outring_info, next_write_location);
 336
 337
 338         spin_unlock_irqrestore(&outring_info->ring_lock, flags);
 339
 340         hv_signal_on_write(old_write, channel);
 341
 342         if (channel->rescind) {
 343                 if (rqst_id != VMBUS_NO_RQSTOR) {
 344                         /* Reclaim request ID to avoid leak of IDs */
 345                         vmbus_request_addr(&channel->requestor, rqst_id);
 346                 }
 347                 return -ENODEV;
 348         }
 349
 350         return 0;
 351 }
 352
 353 int hv_ringbuffer_read(struct vmbus_channel *channel,
 354                        void *buffer, u32 buflen, u32 *buffer_actual_len,
 355                        u64 *requestid, bool raw)
 356 {
 357         struct vmpacket_descriptor *desc;
 358         u32 packetlen, offset;
 359
 360         if (unlikely(buflen == 0))
 361                 return -EINVAL;
 362
 363         *buffer_actual_len = 0;
 364         *requestid = 0;
 365
 366         /* Make sure there is something to read */
 367         desc = hv_pkt_iter_first(channel);
 368         if (desc == NULL) {
 369                 /*
 370                  * No error is set when there is even no header, drivers are
 371                  * supposed to analyze buffer_actual_len.
 372                  */
 373                 return 0;
 374         }
 375
 376         offset = raw ? 0 : (desc->offset8 << 3);
 377         packetlen = (desc->len8 << 3) - offset;
 378         *buffer_actual_len = packetlen;
 379         *requestid = desc->trans_id;
 380
 381         if (unlikely(packetlen > buflen))
 382                 return -ENOBUFS;
 383
 384         /* since ring is double mapped, only one copy is necessary */
 385         memcpy(buffer, (const char *)desc + offset, packetlen);
 386
 387         /* Advance ring index to next packet descriptor */
 388         __hv_pkt_iter_next(channel, desc);
 389
 390         /* Notify host of update */
 391         hv_pkt_iter_close(channel);
 392
 393         return 0;
 394 }
 395
 396 /*
 397  * Determine number of bytes available in ring buffer after
 398  * the current iterator (priv_read_index) location.
 399  *
 400  * This is similar to hv_get_bytes_to_read but with private
 401  * read index instead.
 402  */
 403 static u32 hv_pkt_iter_avail(const struct hv_ring_buffer_info *rbi)
 404 {
 405         u32 priv_read_loc = rbi->priv_read_index;
 406         u32 write_loc = READ_ONCE(rbi->ring_buffer->write_index);
 407
 408         if (write_loc >= priv_read_loc)
 409                 return write_loc - priv_read_loc;
 410         else
 411                 return (rbi->ring_datasize - priv_read_loc) + write_loc;
 412 }
 413
 414 /*
 415  * Get first vmbus packet from ring buffer after read_index
 416  *
 417  * If ring buffer is empty, returns NULL and no other action needed.
 418  */
 419 struct vmpacket_descriptor *hv_pkt_iter_first(struct vmbus_channel *channel)
 420 {
 421         struct hv_ring_buffer_info *rbi = &channel->inbound;
 422         struct vmpacket_descriptor *desc;
 423
 424         hv_debug_delay_test(channel, MESSAGE_DELAY);
 425         if (hv_pkt_iter_avail(rbi) < sizeof(struct vmpacket_descriptor))
 426                 return NULL;
 427
 428         desc = hv_get_ring_buffer(rbi) + rbi->priv_read_index;
 429         if (desc)
 430                 prefetch((char *)desc + (desc->len8 << 3));
 431
 432         return desc;
 433 }
 434 EXPORT_SYMBOL_GPL(hv_pkt_iter_first);
 435
 436 /*
 437  * Get next vmbus packet from ring buffer.
 438  *
 439  * Advances the current location (priv_read_index) and checks for more
 440  * data. If the end of the ring buffer is reached, then return NULL.
 441  */
 442 struct vmpacket_descriptor *
 443 __hv_pkt_iter_next(struct vmbus_channel *channel,
 444                    const struct vmpacket_descriptor *desc)
 445 {
 446         struct hv_ring_buffer_info *rbi = &channel->inbound;
 447         u32 packetlen = desc->len8 << 3;
 448         u32 dsize = rbi->ring_datasize;
 449
 450         hv_debug_delay_test(channel, MESSAGE_DELAY);
 451         /* bump offset to next potential packet */
 452         rbi->priv_read_index += packetlen + VMBUS_PKT_TRAILER;
 453         if (rbi->priv_read_index >= dsize)
 454                 rbi->priv_read_index -= dsize;
 455
 456         /* more data? */
 457         return hv_pkt_iter_first(channel);
 458 }
 459 EXPORT_SYMBOL_GPL(__hv_pkt_iter_next);
 460
 461 /* How many bytes were read in this iterator cycle */
 462 static u32 hv_pkt_iter_bytes_read(const struct hv_ring_buffer_info *rbi,
 463                                         u32 start_read_index)
 464 {
 465         if (rbi->priv_read_index >= start_read_index)
 466                 return rbi->priv_read_index - start_read_index;
 467         else
 468                 return rbi->ring_datasize - start_read_index +
 469                         rbi->priv_read_index;
 470 }
 471
 472 /*
 473  * Update host ring buffer after iterating over packets. If the host has
 474  * stopped queuing new entries because it found the ring buffer full, and
 475  * sufficient space is being freed up, signal the host. But be careful to
 476  * only signal the host when necessary, both for performance reasons and
 477  * because Hyper-V protects itself by throttling guests that signal
 478  * inappropriately.
 479  *
 480  * Determining when to signal is tricky. There are three key data inputs
 481  * that must be handled in this order to avoid race conditions:
 482  *
 483  * 1. Update the read_index
 484  * 2. Read the pending_send_sz
 485  * 3. Read the current write_index
 486  *
 487  * The interrupt_mask is not used to determine when to signal. The
 488  * interrupt_mask is used only on the guest->host ring buffer when
 489  * sending requests to the host. The host does not use it on the host->
 490  * guest ring buffer to indicate whether it should be signaled.
 491  */
 492 void hv_pkt_iter_close(struct vmbus_channel *channel)
 493 {
 494         struct hv_ring_buffer_info *rbi = &channel->inbound;
 495         u32 curr_write_sz, pending_sz, bytes_read, start_read_index;
 496
 497         /*
 498          * Make sure all reads are done before we update the read index since
 499          * the writer may start writing to the read area once the read index
 500          * is updated.
 501          */
 502         virt_rmb();
 503         start_read_index = rbi->ring_buffer->read_index;
 504         rbi->ring_buffer->read_index = rbi->priv_read_index;
 505
 506         /*
 507          * Older versions of Hyper-V (before WS2102 and Win8) do not
 508          * implement pending_send_sz and simply poll if the host->guest
 509          * ring buffer is full.  No signaling is needed or expected.
 510          */
 511         if (!rbi->ring_buffer->feature_bits.feat_pending_send_sz)
 512                 return;
 513
 514         /*
 515          * Issue a full memory barrier before making the signaling decision.
 516          * If reading pending_send_sz were to be reordered and happen
 517          * before we commit the new read_index, a race could occur.  If the
 518          * host were to set the pending_send_sz after we have sampled
 519          * pending_send_sz, and the ring buffer blocks before we commit the
 520          * read index, we could miss sending the interrupt. Issue a full
 521          * memory barrier to address this.
 522          */
 523         virt_mb();
 524
 525         /*
 526          * If the pending_send_sz is zero, then the ring buffer is not
 527          * blocked and there is no need to signal.  This is far by the
 528          * most common case, so exit quickly for best performance.
 529          */
 530         pending_sz = READ_ONCE(rbi->ring_buffer->pending_send_sz);
 531         if (!pending_sz)
 532                 return;
 533
 534         /*
 535          * Ensure the read of write_index in hv_get_bytes_to_write()
 536          * happens after the read of pending_send_sz.
 537          */
 538         virt_rmb();
 539         curr_write_sz = hv_get_bytes_to_write(rbi);
 540         bytes_read = hv_pkt_iter_bytes_read(rbi, start_read_index);
 541
 542         /*
 543          * We want to signal the host only if we're transitioning
 544          * from a "not enough free space" state to a "enough free
 545          * space" state.  For example, it's possible that this function
 546          * could run and free up enough space to signal the host, and then
 547          * run again and free up additional space before the host has a
 548          * chance to clear the pending_send_sz.  The 2nd invocation would
 549          * be a null transition from "enough free space" to "enough free
 550          * space", which doesn't warrant a signal.
 551          *
 552          * Exactly filling the ring buffer is treated as "not enough
 553          * space". The ring buffer always must have at least one byte
 554          * empty so the empty and full conditions are distinguishable.
 555          * hv_get_bytes_to_write() doesn't fully tell the truth in
 556          * this regard.
 557          *
 558          * So first check if we were in the "enough free space" state
 559          * before we began the iteration. If so, the host was not
 560          * blocked, and there's no need to signal.
 561          */
 562         if (curr_write_sz - bytes_read > pending_sz)
 563                 return;
 564
 565         /*
 566          * Similarly, if the new state is "not enough space", then
 567          * there's no need to signal.
 568          */
 569         if (curr_write_sz <= pending_sz)
 570                 return;
 571
 572         ++channel->intr_in_full;
 573         vmbus_setevent(channel);
 574 }
 575 EXPORT_SYMBOL_GPL(hv_pkt_iter_close);