fbmem: don't allow too huge resolutions
[linux-2.6-microblaze.git] / drivers / hid / hid-dr.c
1 // SPDX-License-Identifier: GPL-2.0-or-later
2 /*
3  * Force feedback support for DragonRise Inc. game controllers
4  *
5  * From what I have gathered, these devices are mass produced in China and are
6  * distributed under several vendors. They often share the same design as
7  * the original PlayStation DualShock controller.
8  *
9  * 0079:0006 "DragonRise Inc.   Generic   USB  Joystick  "
10  *  - tested with a Tesun USB-703 game controller.
11  *
12  * Copyright (c) 2009 Richard Walmsley <richwalm@gmail.com>
13  */
14
15 /*
16  */
17
18 #include <linux/input.h>
19 #include <linux/slab.h>
20 #include <linux/hid.h>
21 #include <linux/module.h>
22
23 #include "hid-ids.h"
24
25 #ifdef CONFIG_DRAGONRISE_FF
26
27 struct drff_device {
28         struct hid_report *report;
29 };
30
31 static int drff_play(struct input_dev *dev, void *data,
32                                  struct ff_effect *effect)
33 {
34         struct hid_device *hid = input_get_drvdata(dev);
35         struct drff_device *drff = data;
36         int strong, weak;
37
38         strong = effect->u.rumble.strong_magnitude;
39         weak = effect->u.rumble.weak_magnitude;
40
41         dbg_hid("called with 0x%04x 0x%04x", strong, weak);
42
43         if (strong || weak) {
44                 strong = strong * 0xff / 0xffff;
45                 weak = weak * 0xff / 0xffff;
46
47                 /* While reverse engineering this device, I found that when
48                    this value is set, it causes the strong rumble to function
49                    at a near maximum speed, so we'll bypass it. */
50                 if (weak == 0x0a)
51                         weak = 0x0b;
52
53                 drff->report->field[0]->value[0] = 0x51;
54                 drff->report->field[0]->value[1] = 0x00;
55                 drff->report->field[0]->value[2] = weak;
56                 drff->report->field[0]->value[4] = strong;
57                 hid_hw_request(hid, drff->report, HID_REQ_SET_REPORT);
58
59                 drff->report->field[0]->value[0] = 0xfa;
60                 drff->report->field[0]->value[1] = 0xfe;
61         } else {
62                 drff->report->field[0]->value[0] = 0xf3;
63                 drff->report->field[0]->value[1] = 0x00;
64         }
65
66         drff->report->field[0]->value[2] = 0x00;
67         drff->report->field[0]->value[4] = 0x00;
68         dbg_hid("running with 0x%02x 0x%02x", strong, weak);
69         hid_hw_request(hid, drff->report, HID_REQ_SET_REPORT);
70
71         return 0;
72 }
73
74 static int drff_init(struct hid_device *hid)
75 {
76         struct drff_device *drff;
77         struct hid_report *report;
78         struct hid_input *hidinput;
79         struct list_head *report_list =
80                         &hid->report_enum[HID_OUTPUT_REPORT].report_list;
81         struct input_dev *dev;
82         int error;
83
84         if (list_empty(&hid->inputs)) {
85                 hid_err(hid, "no inputs found\n");
86                 return -ENODEV;
87         }
88         hidinput = list_first_entry(&hid->inputs, struct hid_input, list);
89         dev = hidinput->input;
90
91         if (list_empty(report_list)) {
92                 hid_err(hid, "no output reports found\n");
93                 return -ENODEV;
94         }
95
96         report = list_first_entry(report_list, struct hid_report, list);
97         if (report->maxfield < 1) {
98                 hid_err(hid, "no fields in the report\n");
99                 return -ENODEV;
100         }
101
102         if (report->field[0]->report_count < 7) {
103                 hid_err(hid, "not enough values in the field\n");
104                 return -ENODEV;
105         }
106
107         drff = kzalloc(sizeof(struct drff_device), GFP_KERNEL);
108         if (!drff)
109                 return -ENOMEM;
110
111         set_bit(FF_RUMBLE, dev->ffbit);
112
113         error = input_ff_create_memless(dev, drff, drff_play);
114         if (error) {
115                 kfree(drff);
116                 return error;
117         }
118
119         drff->report = report;
120         drff->report->field[0]->value[0] = 0xf3;
121         drff->report->field[0]->value[1] = 0x00;
122         drff->report->field[0]->value[2] = 0x00;
123         drff->report->field[0]->value[3] = 0x00;
124         drff->report->field[0]->value[4] = 0x00;
125         drff->report->field[0]->value[5] = 0x00;
126         drff->report->field[0]->value[6] = 0x00;
127         hid_hw_request(hid, drff->report, HID_REQ_SET_REPORT);
128
129         hid_info(hid, "Force Feedback for DragonRise Inc. "
130                  "game controllers by Richard Walmsley <richwalm@gmail.com>\n");
131
132         return 0;
133 }
134 #else
135 static inline int drff_init(struct hid_device *hid)
136 {
137         return 0;
138 }
139 #endif
140
141 /*
142  * The original descriptor of joystick with PID 0x0011, represented by DVTech PC
143  * JS19. It seems both copied from another device and a result of confusion
144  * either about the specification or about the program used to create the
145  * descriptor. In any case, it's a wonder it works on Windows.
146  *
147  *  Usage Page (Desktop),             ; Generic desktop controls (01h)
148  *  Usage (Joystick),                 ; Joystick (04h, application collection)
149  *  Collection (Application),
150  *    Collection (Logical),
151  *      Report Size (8),
152  *      Report Count (5),
153  *      Logical Minimum (0),
154  *      Logical Maximum (255),
155  *      Physical Minimum (0),
156  *      Physical Maximum (255),
157  *      Usage (X),                    ; X (30h, dynamic value)
158  *      Usage (X),                    ; X (30h, dynamic value)
159  *      Usage (X),                    ; X (30h, dynamic value)
160  *      Usage (X),                    ; X (30h, dynamic value)
161  *      Usage (Y),                    ; Y (31h, dynamic value)
162  *      Input (Variable),
163  *      Report Size (4),
164  *      Report Count (1),
165  *      Logical Maximum (7),
166  *      Physical Maximum (315),
167  *      Unit (Degrees),
168  *      Usage (00h),
169  *      Input (Variable, Null State),
170  *      Unit,
171  *      Report Size (1),
172  *      Report Count (10),
173  *      Logical Maximum (1),
174  *      Physical Maximum (1),
175  *      Usage Page (Button),          ; Button (09h)
176  *      Usage Minimum (01h),
177  *      Usage Maximum (0Ah),
178  *      Input (Variable),
179  *      Usage Page (FF00h),           ; FF00h, vendor-defined
180  *      Report Size (1),
181  *      Report Count (10),
182  *      Logical Maximum (1),
183  *      Physical Maximum (1),
184  *      Usage (01h),
185  *      Input (Variable),
186  *    End Collection,
187  *    Collection (Logical),
188  *      Report Size (8),
189  *      Report Count (4),
190  *      Physical Maximum (255),
191  *      Logical Maximum (255),
192  *      Usage (02h),
193  *      Output (Variable),
194  *    End Collection,
195  *  End Collection
196  */
197
198 /* Size of the original descriptor of the PID 0x0011 joystick */
199 #define PID0011_RDESC_ORIG_SIZE 101
200
201 /* Fixed report descriptor for PID 0x011 joystick */
202 static __u8 pid0011_rdesc_fixed[] = {
203         0x05, 0x01,         /*  Usage Page (Desktop),           */
204         0x09, 0x04,         /*  Usage (Joystick),               */
205         0xA1, 0x01,         /*  Collection (Application),       */
206         0xA1, 0x02,         /*      Collection (Logical),       */
207         0x14,               /*          Logical Minimum (0),    */
208         0x75, 0x08,         /*          Report Size (8),        */
209         0x95, 0x03,         /*          Report Count (3),       */
210         0x81, 0x01,         /*          Input (Constant),       */
211         0x26, 0xFF, 0x00,   /*          Logical Maximum (255),  */
212         0x95, 0x02,         /*          Report Count (2),       */
213         0x09, 0x30,         /*          Usage (X),              */
214         0x09, 0x31,         /*          Usage (Y),              */
215         0x81, 0x02,         /*          Input (Variable),       */
216         0x75, 0x01,         /*          Report Size (1),        */
217         0x95, 0x04,         /*          Report Count (4),       */
218         0x81, 0x01,         /*          Input (Constant),       */
219         0x25, 0x01,         /*          Logical Maximum (1),    */
220         0x95, 0x0A,         /*          Report Count (10),      */
221         0x05, 0x09,         /*          Usage Page (Button),    */
222         0x19, 0x01,         /*          Usage Minimum (01h),    */
223         0x29, 0x0A,         /*          Usage Maximum (0Ah),    */
224         0x81, 0x02,         /*          Input (Variable),       */
225         0x95, 0x0A,         /*          Report Count (10),      */
226         0x81, 0x01,         /*          Input (Constant),       */
227         0xC0,               /*      End Collection,             */
228         0xC0                /*  End Collection                  */
229 };
230
231 static __u8 *dr_report_fixup(struct hid_device *hdev, __u8 *rdesc,
232                                 unsigned int *rsize)
233 {
234         switch (hdev->product) {
235         case 0x0011:
236                 if (*rsize == PID0011_RDESC_ORIG_SIZE) {
237                         rdesc = pid0011_rdesc_fixed;
238                         *rsize = sizeof(pid0011_rdesc_fixed);
239                 }
240                 break;
241         }
242         return rdesc;
243 }
244
245 #define map_abs(c)      hid_map_usage(hi, usage, bit, max, EV_ABS, (c))
246 #define map_rel(c)      hid_map_usage(hi, usage, bit, max, EV_REL, (c))
247
248 static int dr_input_mapping(struct hid_device *hdev, struct hid_input *hi,
249                             struct hid_field *field, struct hid_usage *usage,
250                             unsigned long **bit, int *max)
251 {
252         switch (usage->hid) {
253         /*
254          * revert to the old hid-input behavior where axes
255          * can be randomly assigned when hid->usage is reused.
256          */
257         case HID_GD_X: case HID_GD_Y: case HID_GD_Z:
258         case HID_GD_RX: case HID_GD_RY: case HID_GD_RZ:
259                 if (field->flags & HID_MAIN_ITEM_RELATIVE)
260                         map_rel(usage->hid & 0xf);
261                 else
262                         map_abs(usage->hid & 0xf);
263                 return 1;
264         }
265
266         return 0;
267 }
268
269 static int dr_probe(struct hid_device *hdev, const struct hid_device_id *id)
270 {
271         int ret;
272
273         dev_dbg(&hdev->dev, "DragonRise Inc. HID hardware probe...");
274
275         ret = hid_parse(hdev);
276         if (ret) {
277                 hid_err(hdev, "parse failed\n");
278                 goto err;
279         }
280
281         ret = hid_hw_start(hdev, HID_CONNECT_DEFAULT & ~HID_CONNECT_FF);
282         if (ret) {
283                 hid_err(hdev, "hw start failed\n");
284                 goto err;
285         }
286
287         switch (hdev->product) {
288         case 0x0006:
289                 ret = drff_init(hdev);
290                 if (ret) {
291                         dev_err(&hdev->dev, "force feedback init failed\n");
292                         hid_hw_stop(hdev);
293                         goto err;
294                 }
295                 break;
296         }
297
298         return 0;
299 err:
300         return ret;
301 }
302
303 static const struct hid_device_id dr_devices[] = {
304         { HID_USB_DEVICE(USB_VENDOR_ID_DRAGONRISE, 0x0006),  },
305         { HID_USB_DEVICE(USB_VENDOR_ID_DRAGONRISE, 0x0011),  },
306         { }
307 };
308 MODULE_DEVICE_TABLE(hid, dr_devices);
309
310 static struct hid_driver dr_driver = {
311         .name = "dragonrise",
312         .id_table = dr_devices,
313         .report_fixup = dr_report_fixup,
314         .probe = dr_probe,
315         .input_mapping = dr_input_mapping,
316 };
317 module_hid_driver(dr_driver);
318
319 MODULE_LICENSE("GPL");