Merge tag 'iommu-updates-v5.13' of git://git.kernel.org/pub/scm/linux/kernel/git...
[linux-2.6-microblaze.git] / drivers / hid / hid-cp2112.c
1 // SPDX-License-Identifier: GPL-2.0-only
2 /*
3  * hid-cp2112.c - Silicon Labs HID USB to SMBus master bridge
4  * Copyright (c) 2013,2014 Uplogix, Inc.
5  * David Barksdale <dbarksdale@uplogix.com>
6  */
7
8 /*
9  * The Silicon Labs CP2112 chip is a USB HID device which provides an
10  * SMBus controller for talking to slave devices and 8 GPIO pins. The
11  * host communicates with the CP2112 via raw HID reports.
12  *
13  * Data Sheet:
14  *   https://www.silabs.com/Support%20Documents/TechnicalDocs/CP2112.pdf
15  * Programming Interface Specification:
16  *   https://www.silabs.com/documents/public/application-notes/an495-cp2112-interface-specification.pdf
17  */
18
19 #include <linux/gpio/consumer.h>
20 #include <linux/gpio/machine.h>
21 #include <linux/gpio/driver.h>
22 #include <linux/hid.h>
23 #include <linux/hidraw.h>
24 #include <linux/i2c.h>
25 #include <linux/module.h>
26 #include <linux/nls.h>
27 #include <linux/usb/ch9.h>
28 #include "hid-ids.h"
29
30 #define CP2112_REPORT_MAX_LENGTH                64
31 #define CP2112_GPIO_CONFIG_LENGTH               5
32 #define CP2112_GPIO_GET_LENGTH                  2
33 #define CP2112_GPIO_SET_LENGTH                  3
34
35 enum {
36         CP2112_GPIO_CONFIG              = 0x02,
37         CP2112_GPIO_GET                 = 0x03,
38         CP2112_GPIO_SET                 = 0x04,
39         CP2112_GET_VERSION_INFO         = 0x05,
40         CP2112_SMBUS_CONFIG             = 0x06,
41         CP2112_DATA_READ_REQUEST        = 0x10,
42         CP2112_DATA_WRITE_READ_REQUEST  = 0x11,
43         CP2112_DATA_READ_FORCE_SEND     = 0x12,
44         CP2112_DATA_READ_RESPONSE       = 0x13,
45         CP2112_DATA_WRITE_REQUEST       = 0x14,
46         CP2112_TRANSFER_STATUS_REQUEST  = 0x15,
47         CP2112_TRANSFER_STATUS_RESPONSE = 0x16,
48         CP2112_CANCEL_TRANSFER          = 0x17,
49         CP2112_LOCK_BYTE                = 0x20,
50         CP2112_USB_CONFIG               = 0x21,
51         CP2112_MANUFACTURER_STRING      = 0x22,
52         CP2112_PRODUCT_STRING           = 0x23,
53         CP2112_SERIAL_STRING            = 0x24,
54 };
55
56 enum {
57         STATUS0_IDLE            = 0x00,
58         STATUS0_BUSY            = 0x01,
59         STATUS0_COMPLETE        = 0x02,
60         STATUS0_ERROR           = 0x03,
61 };
62
63 enum {
64         STATUS1_TIMEOUT_NACK            = 0x00,
65         STATUS1_TIMEOUT_BUS             = 0x01,
66         STATUS1_ARBITRATION_LOST        = 0x02,
67         STATUS1_READ_INCOMPLETE         = 0x03,
68         STATUS1_WRITE_INCOMPLETE        = 0x04,
69         STATUS1_SUCCESS                 = 0x05,
70 };
71
72 struct cp2112_smbus_config_report {
73         u8 report;              /* CP2112_SMBUS_CONFIG */
74         __be32 clock_speed;     /* Hz */
75         u8 device_address;      /* Stored in the upper 7 bits */
76         u8 auto_send_read;      /* 1 = enabled, 0 = disabled */
77         __be16 write_timeout;   /* ms, 0 = no timeout */
78         __be16 read_timeout;    /* ms, 0 = no timeout */
79         u8 scl_low_timeout;     /* 1 = enabled, 0 = disabled */
80         __be16 retry_time;      /* # of retries, 0 = no limit */
81 } __packed;
82
83 struct cp2112_usb_config_report {
84         u8 report;      /* CP2112_USB_CONFIG */
85         __le16 vid;     /* Vendor ID */
86         __le16 pid;     /* Product ID */
87         u8 max_power;   /* Power requested in 2mA units */
88         u8 power_mode;  /* 0x00 = bus powered
89                            0x01 = self powered & regulator off
90                            0x02 = self powered & regulator on */
91         u8 release_major;
92         u8 release_minor;
93         u8 mask;        /* What fields to program */
94 } __packed;
95
96 struct cp2112_read_req_report {
97         u8 report;      /* CP2112_DATA_READ_REQUEST */
98         u8 slave_address;
99         __be16 length;
100 } __packed;
101
102 struct cp2112_write_read_req_report {
103         u8 report;      /* CP2112_DATA_WRITE_READ_REQUEST */
104         u8 slave_address;
105         __be16 length;
106         u8 target_address_length;
107         u8 target_address[16];
108 } __packed;
109
110 struct cp2112_write_req_report {
111         u8 report;      /* CP2112_DATA_WRITE_REQUEST */
112         u8 slave_address;
113         u8 length;
114         u8 data[61];
115 } __packed;
116
117 struct cp2112_force_read_report {
118         u8 report;      /* CP2112_DATA_READ_FORCE_SEND */
119         __be16 length;
120 } __packed;
121
122 struct cp2112_xfer_status_report {
123         u8 report;      /* CP2112_TRANSFER_STATUS_RESPONSE */
124         u8 status0;     /* STATUS0_* */
125         u8 status1;     /* STATUS1_* */
126         __be16 retries;
127         __be16 length;
128 } __packed;
129
130 struct cp2112_string_report {
131         u8 dummy;               /* force .string to be aligned */
132         u8 report;              /* CP2112_*_STRING */
133         u8 length;              /* length in bytes of everyting after .report */
134         u8 type;                /* USB_DT_STRING */
135         wchar_t string[30];     /* UTF16_LITTLE_ENDIAN string */
136 } __packed;
137
138 /* Number of times to request transfer status before giving up waiting for a
139    transfer to complete. This may need to be changed if SMBUS clock, retries,
140    or read/write/scl_low timeout settings are changed. */
141 static const int XFER_STATUS_RETRIES = 10;
142
143 /* Time in ms to wait for a CP2112_DATA_READ_RESPONSE or
144    CP2112_TRANSFER_STATUS_RESPONSE. */
145 static const int RESPONSE_TIMEOUT = 50;
146
147 static const struct hid_device_id cp2112_devices[] = {
148         { HID_USB_DEVICE(USB_VENDOR_ID_CYGNAL, USB_DEVICE_ID_CYGNAL_CP2112) },
149         { }
150 };
151 MODULE_DEVICE_TABLE(hid, cp2112_devices);
152
153 struct cp2112_device {
154         struct i2c_adapter adap;
155         struct hid_device *hdev;
156         wait_queue_head_t wait;
157         u8 read_data[61];
158         u8 read_length;
159         u8 hwversion;
160         int xfer_status;
161         atomic_t read_avail;
162         atomic_t xfer_avail;
163         struct gpio_chip gc;
164         struct irq_chip irq;
165         u8 *in_out_buffer;
166         struct mutex lock;
167
168         struct gpio_desc *desc[8];
169         bool gpio_poll;
170         struct delayed_work gpio_poll_worker;
171         unsigned long irq_mask;
172         u8 gpio_prev_state;
173 };
174
175 static int gpio_push_pull = 0xFF;
176 module_param(gpio_push_pull, int, S_IRUGO | S_IWUSR);
177 MODULE_PARM_DESC(gpio_push_pull, "GPIO push-pull configuration bitmask");
178
179 static int cp2112_gpio_direction_input(struct gpio_chip *chip, unsigned offset)
180 {
181         struct cp2112_device *dev = gpiochip_get_data(chip);
182         struct hid_device *hdev = dev->hdev;
183         u8 *buf = dev->in_out_buffer;
184         int ret;
185
186         mutex_lock(&dev->lock);
187
188         ret = hid_hw_raw_request(hdev, CP2112_GPIO_CONFIG, buf,
189                                  CP2112_GPIO_CONFIG_LENGTH, HID_FEATURE_REPORT,
190                                  HID_REQ_GET_REPORT);
191         if (ret != CP2112_GPIO_CONFIG_LENGTH) {
192                 hid_err(hdev, "error requesting GPIO config: %d\n", ret);
193                 if (ret >= 0)
194                         ret = -EIO;
195                 goto exit;
196         }
197
198         buf[1] &= ~(1 << offset);
199         buf[2] = gpio_push_pull;
200
201         ret = hid_hw_raw_request(hdev, CP2112_GPIO_CONFIG, buf,
202                                  CP2112_GPIO_CONFIG_LENGTH, HID_FEATURE_REPORT,
203                                  HID_REQ_SET_REPORT);
204         if (ret != CP2112_GPIO_CONFIG_LENGTH) {
205                 hid_err(hdev, "error setting GPIO config: %d\n", ret);
206                 if (ret >= 0)
207                         ret = -EIO;
208                 goto exit;
209         }
210
211         ret = 0;
212
213 exit:
214         mutex_unlock(&dev->lock);
215         return ret;
216 }
217
218 static void cp2112_gpio_set(struct gpio_chip *chip, unsigned offset, int value)
219 {
220         struct cp2112_device *dev = gpiochip_get_data(chip);
221         struct hid_device *hdev = dev->hdev;
222         u8 *buf = dev->in_out_buffer;
223         int ret;
224
225         mutex_lock(&dev->lock);
226
227         buf[0] = CP2112_GPIO_SET;
228         buf[1] = value ? 0xff : 0;
229         buf[2] = 1 << offset;
230
231         ret = hid_hw_raw_request(hdev, CP2112_GPIO_SET, buf,
232                                  CP2112_GPIO_SET_LENGTH, HID_FEATURE_REPORT,
233                                  HID_REQ_SET_REPORT);
234         if (ret < 0)
235                 hid_err(hdev, "error setting GPIO values: %d\n", ret);
236
237         mutex_unlock(&dev->lock);
238 }
239
240 static int cp2112_gpio_get_all(struct gpio_chip *chip)
241 {
242         struct cp2112_device *dev = gpiochip_get_data(chip);
243         struct hid_device *hdev = dev->hdev;
244         u8 *buf = dev->in_out_buffer;
245         int ret;
246
247         mutex_lock(&dev->lock);
248
249         ret = hid_hw_raw_request(hdev, CP2112_GPIO_GET, buf,
250                                  CP2112_GPIO_GET_LENGTH, HID_FEATURE_REPORT,
251                                  HID_REQ_GET_REPORT);
252         if (ret != CP2112_GPIO_GET_LENGTH) {
253                 hid_err(hdev, "error requesting GPIO values: %d\n", ret);
254                 ret = ret < 0 ? ret : -EIO;
255                 goto exit;
256         }
257
258         ret = buf[1];
259
260 exit:
261         mutex_unlock(&dev->lock);
262
263         return ret;
264 }
265
266 static int cp2112_gpio_get(struct gpio_chip *chip, unsigned int offset)
267 {
268         int ret;
269
270         ret = cp2112_gpio_get_all(chip);
271         if (ret < 0)
272                 return ret;
273
274         return (ret >> offset) & 1;
275 }
276
277 static int cp2112_gpio_direction_output(struct gpio_chip *chip,
278                                         unsigned offset, int value)
279 {
280         struct cp2112_device *dev = gpiochip_get_data(chip);
281         struct hid_device *hdev = dev->hdev;
282         u8 *buf = dev->in_out_buffer;
283         int ret;
284
285         mutex_lock(&dev->lock);
286
287         ret = hid_hw_raw_request(hdev, CP2112_GPIO_CONFIG, buf,
288                                  CP2112_GPIO_CONFIG_LENGTH, HID_FEATURE_REPORT,
289                                  HID_REQ_GET_REPORT);
290         if (ret != CP2112_GPIO_CONFIG_LENGTH) {
291                 hid_err(hdev, "error requesting GPIO config: %d\n", ret);
292                 goto fail;
293         }
294
295         buf[1] |= 1 << offset;
296         buf[2] = gpio_push_pull;
297
298         ret = hid_hw_raw_request(hdev, CP2112_GPIO_CONFIG, buf,
299                                  CP2112_GPIO_CONFIG_LENGTH, HID_FEATURE_REPORT,
300                                  HID_REQ_SET_REPORT);
301         if (ret < 0) {
302                 hid_err(hdev, "error setting GPIO config: %d\n", ret);
303                 goto fail;
304         }
305
306         mutex_unlock(&dev->lock);
307
308         /*
309          * Set gpio value when output direction is already set,
310          * as specified in AN495, Rev. 0.2, cpt. 4.4
311          */
312         cp2112_gpio_set(chip, offset, value);
313
314         return 0;
315
316 fail:
317         mutex_unlock(&dev->lock);
318         return ret < 0 ? ret : -EIO;
319 }
320
321 static int cp2112_hid_get(struct hid_device *hdev, unsigned char report_number,
322                           u8 *data, size_t count, unsigned char report_type)
323 {
324         u8 *buf;
325         int ret;
326
327         buf = kmalloc(count, GFP_KERNEL);
328         if (!buf)
329                 return -ENOMEM;
330
331         ret = hid_hw_raw_request(hdev, report_number, buf, count,
332                                        report_type, HID_REQ_GET_REPORT);
333         memcpy(data, buf, count);
334         kfree(buf);
335         return ret;
336 }
337
338 static int cp2112_hid_output(struct hid_device *hdev, u8 *data, size_t count,
339                              unsigned char report_type)
340 {
341         u8 *buf;
342         int ret;
343
344         buf = kmemdup(data, count, GFP_KERNEL);
345         if (!buf)
346                 return -ENOMEM;
347
348         if (report_type == HID_OUTPUT_REPORT)
349                 ret = hid_hw_output_report(hdev, buf, count);
350         else
351                 ret = hid_hw_raw_request(hdev, buf[0], buf, count, report_type,
352                                 HID_REQ_SET_REPORT);
353
354         kfree(buf);
355         return ret;
356 }
357
358 static int cp2112_wait(struct cp2112_device *dev, atomic_t *avail)
359 {
360         int ret = 0;
361
362         /* We have sent either a CP2112_TRANSFER_STATUS_REQUEST or a
363          * CP2112_DATA_READ_FORCE_SEND and we are waiting for the response to
364          * come in cp2112_raw_event or timeout. There will only be one of these
365          * in flight at any one time. The timeout is extremely large and is a
366          * last resort if the CP2112 has died. If we do timeout we don't expect
367          * to receive the response which would cause data races, it's not like
368          * we can do anything about it anyway.
369          */
370         ret = wait_event_interruptible_timeout(dev->wait,
371                 atomic_read(avail), msecs_to_jiffies(RESPONSE_TIMEOUT));
372         if (-ERESTARTSYS == ret)
373                 return ret;
374         if (!ret)
375                 return -ETIMEDOUT;
376
377         atomic_set(avail, 0);
378         return 0;
379 }
380
381 static int cp2112_xfer_status(struct cp2112_device *dev)
382 {
383         struct hid_device *hdev = dev->hdev;
384         u8 buf[2];
385         int ret;
386
387         buf[0] = CP2112_TRANSFER_STATUS_REQUEST;
388         buf[1] = 0x01;
389         atomic_set(&dev->xfer_avail, 0);
390
391         ret = cp2112_hid_output(hdev, buf, 2, HID_OUTPUT_REPORT);
392         if (ret < 0) {
393                 hid_warn(hdev, "Error requesting status: %d\n", ret);
394                 return ret;
395         }
396
397         ret = cp2112_wait(dev, &dev->xfer_avail);
398         if (ret)
399                 return ret;
400
401         return dev->xfer_status;
402 }
403
404 static int cp2112_read(struct cp2112_device *dev, u8 *data, size_t size)
405 {
406         struct hid_device *hdev = dev->hdev;
407         struct cp2112_force_read_report report;
408         int ret;
409
410         if (size > sizeof(dev->read_data))
411                 size = sizeof(dev->read_data);
412         report.report = CP2112_DATA_READ_FORCE_SEND;
413         report.length = cpu_to_be16(size);
414
415         atomic_set(&dev->read_avail, 0);
416
417         ret = cp2112_hid_output(hdev, &report.report, sizeof(report),
418                                 HID_OUTPUT_REPORT);
419         if (ret < 0) {
420                 hid_warn(hdev, "Error requesting data: %d\n", ret);
421                 return ret;
422         }
423
424         ret = cp2112_wait(dev, &dev->read_avail);
425         if (ret)
426                 return ret;
427
428         hid_dbg(hdev, "read %d of %zd bytes requested\n",
429                 dev->read_length, size);
430
431         if (size > dev->read_length)
432                 size = dev->read_length;
433
434         memcpy(data, dev->read_data, size);
435         return dev->read_length;
436 }
437
438 static int cp2112_read_req(void *buf, u8 slave_address, u16 length)
439 {
440         struct cp2112_read_req_report *report = buf;
441
442         if (length < 1 || length > 512)
443                 return -EINVAL;
444
445         report->report = CP2112_DATA_READ_REQUEST;
446         report->slave_address = slave_address << 1;
447         report->length = cpu_to_be16(length);
448         return sizeof(*report);
449 }
450
451 static int cp2112_write_read_req(void *buf, u8 slave_address, u16 length,
452                                  u8 command, u8 *data, u8 data_length)
453 {
454         struct cp2112_write_read_req_report *report = buf;
455
456         if (length < 1 || length > 512
457             || data_length > sizeof(report->target_address) - 1)
458                 return -EINVAL;
459
460         report->report = CP2112_DATA_WRITE_READ_REQUEST;
461         report->slave_address = slave_address << 1;
462         report->length = cpu_to_be16(length);
463         report->target_address_length = data_length + 1;
464         report->target_address[0] = command;
465         memcpy(&report->target_address[1], data, data_length);
466         return data_length + 6;
467 }
468
469 static int cp2112_write_req(void *buf, u8 slave_address, u8 command, u8 *data,
470                             u8 data_length)
471 {
472         struct cp2112_write_req_report *report = buf;
473
474         if (data_length > sizeof(report->data) - 1)
475                 return -EINVAL;
476
477         report->report = CP2112_DATA_WRITE_REQUEST;
478         report->slave_address = slave_address << 1;
479         report->length = data_length + 1;
480         report->data[0] = command;
481         memcpy(&report->data[1], data, data_length);
482         return data_length + 4;
483 }
484
485 static int cp2112_i2c_write_req(void *buf, u8 slave_address, u8 *data,
486                                 u8 data_length)
487 {
488         struct cp2112_write_req_report *report = buf;
489
490         if (data_length > sizeof(report->data))
491                 return -EINVAL;
492
493         report->report = CP2112_DATA_WRITE_REQUEST;
494         report->slave_address = slave_address << 1;
495         report->length = data_length;
496         memcpy(report->data, data, data_length);
497         return data_length + 3;
498 }
499
500 static int cp2112_i2c_write_read_req(void *buf, u8 slave_address,
501                                      u8 *addr, int addr_length,
502                                      int read_length)
503 {
504         struct cp2112_write_read_req_report *report = buf;
505
506         if (read_length < 1 || read_length > 512 ||
507             addr_length > sizeof(report->target_address))
508                 return -EINVAL;
509
510         report->report = CP2112_DATA_WRITE_READ_REQUEST;
511         report->slave_address = slave_address << 1;
512         report->length = cpu_to_be16(read_length);
513         report->target_address_length = addr_length;
514         memcpy(report->target_address, addr, addr_length);
515         return addr_length + 5;
516 }
517
518 static int cp2112_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg *msgs,
519                            int num)
520 {
521         struct cp2112_device *dev = (struct cp2112_device *)adap->algo_data;
522         struct hid_device *hdev = dev->hdev;
523         u8 buf[64];
524         ssize_t count;
525         ssize_t read_length = 0;
526         u8 *read_buf = NULL;
527         unsigned int retries;
528         int ret;
529
530         hid_dbg(hdev, "I2C %d messages\n", num);
531
532         if (num == 1) {
533                 if (msgs->flags & I2C_M_RD) {
534                         hid_dbg(hdev, "I2C read %#04x len %d\n",
535                                 msgs->addr, msgs->len);
536                         read_length = msgs->len;
537                         read_buf = msgs->buf;
538                         count = cp2112_read_req(buf, msgs->addr, msgs->len);
539                 } else {
540                         hid_dbg(hdev, "I2C write %#04x len %d\n",
541                                 msgs->addr, msgs->len);
542                         count = cp2112_i2c_write_req(buf, msgs->addr,
543                                                      msgs->buf, msgs->len);
544                 }
545                 if (count < 0)
546                         return count;
547         } else if (dev->hwversion > 1 &&  /* no repeated start in rev 1 */
548                    num == 2 &&
549                    msgs[0].addr == msgs[1].addr &&
550                    !(msgs[0].flags & I2C_M_RD) && (msgs[1].flags & I2C_M_RD)) {
551                 hid_dbg(hdev, "I2C write-read %#04x wlen %d rlen %d\n",
552                         msgs[0].addr, msgs[0].len, msgs[1].len);
553                 read_length = msgs[1].len;
554                 read_buf = msgs[1].buf;
555                 count = cp2112_i2c_write_read_req(buf, msgs[0].addr,
556                                 msgs[0].buf, msgs[0].len, msgs[1].len);
557                 if (count < 0)
558                         return count;
559         } else {
560                 hid_err(hdev,
561                         "Multi-message I2C transactions not supported\n");
562                 return -EOPNOTSUPP;
563         }
564
565         ret = hid_hw_power(hdev, PM_HINT_FULLON);
566         if (ret < 0) {
567                 hid_err(hdev, "power management error: %d\n", ret);
568                 return ret;
569         }
570
571         ret = cp2112_hid_output(hdev, buf, count, HID_OUTPUT_REPORT);
572         if (ret < 0) {
573                 hid_warn(hdev, "Error starting transaction: %d\n", ret);
574                 goto power_normal;
575         }
576
577         for (retries = 0; retries < XFER_STATUS_RETRIES; ++retries) {
578                 ret = cp2112_xfer_status(dev);
579                 if (-EBUSY == ret)
580                         continue;
581                 if (ret < 0)
582                         goto power_normal;
583                 break;
584         }
585
586         if (XFER_STATUS_RETRIES <= retries) {
587                 hid_warn(hdev, "Transfer timed out, cancelling.\n");
588                 buf[0] = CP2112_CANCEL_TRANSFER;
589                 buf[1] = 0x01;
590
591                 ret = cp2112_hid_output(hdev, buf, 2, HID_OUTPUT_REPORT);
592                 if (ret < 0)
593                         hid_warn(hdev, "Error cancelling transaction: %d\n",
594                                  ret);
595
596                 ret = -ETIMEDOUT;
597                 goto power_normal;
598         }
599
600         for (count = 0; count < read_length;) {
601                 ret = cp2112_read(dev, read_buf + count, read_length - count);
602                 if (ret < 0)
603                         goto power_normal;
604                 if (ret == 0) {
605                         hid_err(hdev, "read returned 0\n");
606                         ret = -EIO;
607                         goto power_normal;
608                 }
609                 count += ret;
610                 if (count > read_length) {
611                         /*
612                          * The hardware returned too much data.
613                          * This is mostly harmless because cp2112_read()
614                          * has a limit check so didn't overrun our
615                          * buffer.  Nevertheless, we return an error
616                          * because something is seriously wrong and
617                          * it shouldn't go unnoticed.
618                          */
619                         hid_err(hdev, "long read: %d > %zd\n",
620                                 ret, read_length - count + ret);
621                         ret = -EIO;
622                         goto power_normal;
623                 }
624         }
625
626         /* return the number of transferred messages */
627         ret = num;
628
629 power_normal:
630         hid_hw_power(hdev, PM_HINT_NORMAL);
631         hid_dbg(hdev, "I2C transfer finished: %d\n", ret);
632         return ret;
633 }
634
635 static int cp2112_xfer(struct i2c_adapter *adap, u16 addr,
636                        unsigned short flags, char read_write, u8 command,
637                        int size, union i2c_smbus_data *data)
638 {
639         struct cp2112_device *dev = (struct cp2112_device *)adap->algo_data;
640         struct hid_device *hdev = dev->hdev;
641         u8 buf[64];
642         __le16 word;
643         ssize_t count;
644         size_t read_length = 0;
645         unsigned int retries;
646         int ret;
647
648         hid_dbg(hdev, "%s addr 0x%x flags 0x%x cmd 0x%x size %d\n",
649                 read_write == I2C_SMBUS_WRITE ? "write" : "read",
650                 addr, flags, command, size);
651
652         switch (size) {
653         case I2C_SMBUS_BYTE:
654                 read_length = 1;
655
656                 if (I2C_SMBUS_READ == read_write)
657                         count = cp2112_read_req(buf, addr, read_length);
658                 else
659                         count = cp2112_write_req(buf, addr, command, NULL,
660                                                  0);
661                 break;
662         case I2C_SMBUS_BYTE_DATA:
663                 read_length = 1;
664
665                 if (I2C_SMBUS_READ == read_write)
666                         count = cp2112_write_read_req(buf, addr, read_length,
667                                                       command, NULL, 0);
668                 else
669                         count = cp2112_write_req(buf, addr, command,
670                                                  &data->byte, 1);
671                 break;
672         case I2C_SMBUS_WORD_DATA:
673                 read_length = 2;
674                 word = cpu_to_le16(data->word);
675
676                 if (I2C_SMBUS_READ == read_write)
677                         count = cp2112_write_read_req(buf, addr, read_length,
678                                                       command, NULL, 0);
679                 else
680                         count = cp2112_write_req(buf, addr, command,
681                                                  (u8 *)&word, 2);
682                 break;
683         case I2C_SMBUS_PROC_CALL:
684                 size = I2C_SMBUS_WORD_DATA;
685                 read_write = I2C_SMBUS_READ;
686                 read_length = 2;
687                 word = cpu_to_le16(data->word);
688
689                 count = cp2112_write_read_req(buf, addr, read_length, command,
690                                               (u8 *)&word, 2);
691                 break;
692         case I2C_SMBUS_I2C_BLOCK_DATA:
693                 if (read_write == I2C_SMBUS_READ) {
694                         read_length = data->block[0];
695                         count = cp2112_write_read_req(buf, addr, read_length,
696                                                       command, NULL, 0);
697                 } else {
698                         count = cp2112_write_req(buf, addr, command,
699                                                  data->block + 1,
700                                                  data->block[0]);
701                 }
702                 break;
703         case I2C_SMBUS_BLOCK_DATA:
704                 if (I2C_SMBUS_READ == read_write) {
705                         count = cp2112_write_read_req(buf, addr,
706                                                       I2C_SMBUS_BLOCK_MAX,
707                                                       command, NULL, 0);
708                 } else {
709                         count = cp2112_write_req(buf, addr, command,
710                                                  data->block,
711                                                  data->block[0] + 1);
712                 }
713                 break;
714         case I2C_SMBUS_BLOCK_PROC_CALL:
715                 size = I2C_SMBUS_BLOCK_DATA;
716                 read_write = I2C_SMBUS_READ;
717
718                 count = cp2112_write_read_req(buf, addr, I2C_SMBUS_BLOCK_MAX,
719                                               command, data->block,
720                                               data->block[0] + 1);
721                 break;
722         default:
723                 hid_warn(hdev, "Unsupported transaction %d\n", size);
724                 return -EOPNOTSUPP;
725         }
726
727         if (count < 0)
728                 return count;
729
730         ret = hid_hw_power(hdev, PM_HINT_FULLON);
731         if (ret < 0) {
732                 hid_err(hdev, "power management error: %d\n", ret);
733                 return ret;
734         }
735
736         ret = cp2112_hid_output(hdev, buf, count, HID_OUTPUT_REPORT);
737         if (ret < 0) {
738                 hid_warn(hdev, "Error starting transaction: %d\n", ret);
739                 goto power_normal;
740         }
741
742         for (retries = 0; retries < XFER_STATUS_RETRIES; ++retries) {
743                 ret = cp2112_xfer_status(dev);
744                 if (-EBUSY == ret)
745                         continue;
746                 if (ret < 0)
747                         goto power_normal;
748                 break;
749         }
750
751         if (XFER_STATUS_RETRIES <= retries) {
752                 hid_warn(hdev, "Transfer timed out, cancelling.\n");
753                 buf[0] = CP2112_CANCEL_TRANSFER;
754                 buf[1] = 0x01;
755
756                 ret = cp2112_hid_output(hdev, buf, 2, HID_OUTPUT_REPORT);
757                 if (ret < 0)
758                         hid_warn(hdev, "Error cancelling transaction: %d\n",
759                                  ret);
760
761                 ret = -ETIMEDOUT;
762                 goto power_normal;
763         }
764
765         if (I2C_SMBUS_WRITE == read_write) {
766                 ret = 0;
767                 goto power_normal;
768         }
769
770         if (I2C_SMBUS_BLOCK_DATA == size)
771                 read_length = ret;
772
773         ret = cp2112_read(dev, buf, read_length);
774         if (ret < 0)
775                 goto power_normal;
776         if (ret != read_length) {
777                 hid_warn(hdev, "short read: %d < %zd\n", ret, read_length);
778                 ret = -EIO;
779                 goto power_normal;
780         }
781
782         switch (size) {
783         case I2C_SMBUS_BYTE:
784         case I2C_SMBUS_BYTE_DATA:
785                 data->byte = buf[0];
786                 break;
787         case I2C_SMBUS_WORD_DATA:
788                 data->word = le16_to_cpup((__le16 *)buf);
789                 break;
790         case I2C_SMBUS_I2C_BLOCK_DATA:
791                 memcpy(data->block + 1, buf, read_length);
792                 break;
793         case I2C_SMBUS_BLOCK_DATA:
794                 if (read_length > I2C_SMBUS_BLOCK_MAX) {
795                         ret = -EPROTO;
796                         goto power_normal;
797                 }
798
799                 memcpy(data->block, buf, read_length);
800                 break;
801         }
802
803         ret = 0;
804 power_normal:
805         hid_hw_power(hdev, PM_HINT_NORMAL);
806         hid_dbg(hdev, "transfer finished: %d\n", ret);
807         return ret;
808 }
809
810 static u32 cp2112_functionality(struct i2c_adapter *adap)
811 {
812         return I2C_FUNC_I2C |
813                 I2C_FUNC_SMBUS_BYTE |
814                 I2C_FUNC_SMBUS_BYTE_DATA |
815                 I2C_FUNC_SMBUS_WORD_DATA |
816                 I2C_FUNC_SMBUS_BLOCK_DATA |
817                 I2C_FUNC_SMBUS_I2C_BLOCK |
818                 I2C_FUNC_SMBUS_PROC_CALL |
819                 I2C_FUNC_SMBUS_BLOCK_PROC_CALL;
820 }
821
822 static const struct i2c_algorithm smbus_algorithm = {
823         .master_xfer    = cp2112_i2c_xfer,
824         .smbus_xfer     = cp2112_xfer,
825         .functionality  = cp2112_functionality,
826 };
827
828 static int cp2112_get_usb_config(struct hid_device *hdev,
829                                  struct cp2112_usb_config_report *cfg)
830 {
831         int ret;
832
833         ret = cp2112_hid_get(hdev, CP2112_USB_CONFIG, (u8 *)cfg, sizeof(*cfg),
834                              HID_FEATURE_REPORT);
835         if (ret != sizeof(*cfg)) {
836                 hid_err(hdev, "error reading usb config: %d\n", ret);
837                 if (ret < 0)
838                         return ret;
839                 return -EIO;
840         }
841
842         return 0;
843 }
844
845 static int cp2112_set_usb_config(struct hid_device *hdev,
846                                  struct cp2112_usb_config_report *cfg)
847 {
848         int ret;
849
850         BUG_ON(cfg->report != CP2112_USB_CONFIG);
851
852         ret = cp2112_hid_output(hdev, (u8 *)cfg, sizeof(*cfg),
853                                 HID_FEATURE_REPORT);
854         if (ret != sizeof(*cfg)) {
855                 hid_err(hdev, "error writing usb config: %d\n", ret);
856                 if (ret < 0)
857                         return ret;
858                 return -EIO;
859         }
860
861         return 0;
862 }
863
864 static void chmod_sysfs_attrs(struct hid_device *hdev);
865
866 #define CP2112_CONFIG_ATTR(name, store, format, ...) \
867 static ssize_t name##_store(struct device *kdev, \
868                             struct device_attribute *attr, const char *buf, \
869                             size_t count) \
870 { \
871         struct hid_device *hdev = to_hid_device(kdev); \
872         struct cp2112_usb_config_report cfg; \
873         int ret = cp2112_get_usb_config(hdev, &cfg); \
874         if (ret) \
875                 return ret; \
876         store; \
877         ret = cp2112_set_usb_config(hdev, &cfg); \
878         if (ret) \
879                 return ret; \
880         chmod_sysfs_attrs(hdev); \
881         return count; \
882 } \
883 static ssize_t name##_show(struct device *kdev, \
884                            struct device_attribute *attr, char *buf) \
885 { \
886         struct hid_device *hdev = to_hid_device(kdev); \
887         struct cp2112_usb_config_report cfg; \
888         int ret = cp2112_get_usb_config(hdev, &cfg); \
889         if (ret) \
890                 return ret; \
891         return scnprintf(buf, PAGE_SIZE, format, ##__VA_ARGS__); \
892 } \
893 static DEVICE_ATTR_RW(name);
894
895 CP2112_CONFIG_ATTR(vendor_id, ({
896         u16 vid;
897
898         if (sscanf(buf, "%hi", &vid) != 1)
899                 return -EINVAL;
900
901         cfg.vid = cpu_to_le16(vid);
902         cfg.mask = 0x01;
903 }), "0x%04x\n", le16_to_cpu(cfg.vid));
904
905 CP2112_CONFIG_ATTR(product_id, ({
906         u16 pid;
907
908         if (sscanf(buf, "%hi", &pid) != 1)
909                 return -EINVAL;
910
911         cfg.pid = cpu_to_le16(pid);
912         cfg.mask = 0x02;
913 }), "0x%04x\n", le16_to_cpu(cfg.pid));
914
915 CP2112_CONFIG_ATTR(max_power, ({
916         int mA;
917
918         if (sscanf(buf, "%i", &mA) != 1)
919                 return -EINVAL;
920
921         cfg.max_power = (mA + 1) / 2;
922         cfg.mask = 0x04;
923 }), "%u mA\n", cfg.max_power * 2);
924
925 CP2112_CONFIG_ATTR(power_mode, ({
926         if (sscanf(buf, "%hhi", &cfg.power_mode) != 1)
927                 return -EINVAL;
928
929         cfg.mask = 0x08;
930 }), "%u\n", cfg.power_mode);
931
932 CP2112_CONFIG_ATTR(release_version, ({
933         if (sscanf(buf, "%hhi.%hhi", &cfg.release_major, &cfg.release_minor)
934             != 2)
935                 return -EINVAL;
936
937         cfg.mask = 0x10;
938 }), "%u.%u\n", cfg.release_major, cfg.release_minor);
939
940 #undef CP2112_CONFIG_ATTR
941
942 struct cp2112_pstring_attribute {
943         struct device_attribute attr;
944         unsigned char report;
945 };
946
947 static ssize_t pstr_store(struct device *kdev,
948                           struct device_attribute *kattr, const char *buf,
949                           size_t count)
950 {
951         struct hid_device *hdev = to_hid_device(kdev);
952         struct cp2112_pstring_attribute *attr =
953                 container_of(kattr, struct cp2112_pstring_attribute, attr);
954         struct cp2112_string_report report;
955         int ret;
956
957         memset(&report, 0, sizeof(report));
958
959         ret = utf8s_to_utf16s(buf, count, UTF16_LITTLE_ENDIAN,
960                               report.string, ARRAY_SIZE(report.string));
961         report.report = attr->report;
962         report.length = ret * sizeof(report.string[0]) + 2;
963         report.type = USB_DT_STRING;
964
965         ret = cp2112_hid_output(hdev, &report.report, report.length + 1,
966                                 HID_FEATURE_REPORT);
967         if (ret != report.length + 1) {
968                 hid_err(hdev, "error writing %s string: %d\n", kattr->attr.name,
969                         ret);
970                 if (ret < 0)
971                         return ret;
972                 return -EIO;
973         }
974
975         chmod_sysfs_attrs(hdev);
976         return count;
977 }
978
979 static ssize_t pstr_show(struct device *kdev,
980                          struct device_attribute *kattr, char *buf)
981 {
982         struct hid_device *hdev = to_hid_device(kdev);
983         struct cp2112_pstring_attribute *attr =
984                 container_of(kattr, struct cp2112_pstring_attribute, attr);
985         struct cp2112_string_report report;
986         u8 length;
987         int ret;
988
989         ret = cp2112_hid_get(hdev, attr->report, &report.report,
990                              sizeof(report) - 1, HID_FEATURE_REPORT);
991         if (ret < 3) {
992                 hid_err(hdev, "error reading %s string: %d\n", kattr->attr.name,
993                         ret);
994                 if (ret < 0)
995                         return ret;
996                 return -EIO;
997         }
998
999         if (report.length < 2) {
1000                 hid_err(hdev, "invalid %s string length: %d\n",
1001                         kattr->attr.name, report.length);
1002                 return -EIO;
1003         }
1004
1005         length = report.length > ret - 1 ? ret - 1 : report.length;
1006         length = (length - 2) / sizeof(report.string[0]);
1007         ret = utf16s_to_utf8s(report.string, length, UTF16_LITTLE_ENDIAN, buf,
1008                               PAGE_SIZE - 1);
1009         buf[ret++] = '\n';
1010         return ret;
1011 }
1012
1013 #define CP2112_PSTR_ATTR(name, _report) \
1014 static struct cp2112_pstring_attribute dev_attr_##name = { \
1015         .attr = __ATTR(name, (S_IWUSR | S_IRUGO), pstr_show, pstr_store), \
1016         .report = _report, \
1017 };
1018
1019 CP2112_PSTR_ATTR(manufacturer,  CP2112_MANUFACTURER_STRING);
1020 CP2112_PSTR_ATTR(product,       CP2112_PRODUCT_STRING);
1021 CP2112_PSTR_ATTR(serial,        CP2112_SERIAL_STRING);
1022
1023 #undef CP2112_PSTR_ATTR
1024
1025 static const struct attribute_group cp2112_attr_group = {
1026         .attrs = (struct attribute *[]){
1027                 &dev_attr_vendor_id.attr,
1028                 &dev_attr_product_id.attr,
1029                 &dev_attr_max_power.attr,
1030                 &dev_attr_power_mode.attr,
1031                 &dev_attr_release_version.attr,
1032                 &dev_attr_manufacturer.attr.attr,
1033                 &dev_attr_product.attr.attr,
1034                 &dev_attr_serial.attr.attr,
1035                 NULL
1036         }
1037 };
1038
1039 /* Chmoding our sysfs attributes is simply a way to expose which fields in the
1040  * PROM have already been programmed. We do not depend on this preventing
1041  * writing to these attributes since the CP2112 will simply ignore writes to
1042  * already-programmed fields. This is why there is no sense in fixing this
1043  * racy behaviour.
1044  */
1045 static void chmod_sysfs_attrs(struct hid_device *hdev)
1046 {
1047         struct attribute **attr;
1048         u8 buf[2];
1049         int ret;
1050
1051         ret = cp2112_hid_get(hdev, CP2112_LOCK_BYTE, buf, sizeof(buf),
1052                              HID_FEATURE_REPORT);
1053         if (ret != sizeof(buf)) {
1054                 hid_err(hdev, "error reading lock byte: %d\n", ret);
1055                 return;
1056         }
1057
1058         for (attr = cp2112_attr_group.attrs; *attr; ++attr) {
1059                 umode_t mode = (buf[1] & 1) ? S_IWUSR | S_IRUGO : S_IRUGO;
1060                 ret = sysfs_chmod_file(&hdev->dev.kobj, *attr, mode);
1061                 if (ret < 0)
1062                         hid_err(hdev, "error chmoding sysfs file %s\n",
1063                                 (*attr)->name);
1064                 buf[1] >>= 1;
1065         }
1066 }
1067
1068 static void cp2112_gpio_irq_ack(struct irq_data *d)
1069 {
1070 }
1071
1072 static void cp2112_gpio_irq_mask(struct irq_data *d)
1073 {
1074         struct gpio_chip *gc = irq_data_get_irq_chip_data(d);
1075         struct cp2112_device *dev = gpiochip_get_data(gc);
1076
1077         __clear_bit(d->hwirq, &dev->irq_mask);
1078 }
1079
1080 static void cp2112_gpio_irq_unmask(struct irq_data *d)
1081 {
1082         struct gpio_chip *gc = irq_data_get_irq_chip_data(d);
1083         struct cp2112_device *dev = gpiochip_get_data(gc);
1084
1085         __set_bit(d->hwirq, &dev->irq_mask);
1086 }
1087
1088 static void cp2112_gpio_poll_callback(struct work_struct *work)
1089 {
1090         struct cp2112_device *dev = container_of(work, struct cp2112_device,
1091                                                  gpio_poll_worker.work);
1092         struct irq_data *d;
1093         u8 gpio_mask;
1094         u8 virqs = (u8)dev->irq_mask;
1095         u32 irq_type;
1096         int irq, virq, ret;
1097
1098         ret = cp2112_gpio_get_all(&dev->gc);
1099         if (ret == -ENODEV) /* the hardware has been disconnected */
1100                 return;
1101         if (ret < 0)
1102                 goto exit;
1103
1104         gpio_mask = ret;
1105
1106         while (virqs) {
1107                 virq = ffs(virqs) - 1;
1108                 virqs &= ~BIT(virq);
1109
1110                 if (!dev->gc.to_irq)
1111                         break;
1112
1113                 irq = dev->gc.to_irq(&dev->gc, virq);
1114
1115                 d = irq_get_irq_data(irq);
1116                 if (!d)
1117                         continue;
1118
1119                 irq_type = irqd_get_trigger_type(d);
1120
1121                 if (gpio_mask & BIT(virq)) {
1122                         /* Level High */
1123
1124                         if (irq_type & IRQ_TYPE_LEVEL_HIGH)
1125                                 handle_nested_irq(irq);
1126
1127                         if ((irq_type & IRQ_TYPE_EDGE_RISING) &&
1128                             !(dev->gpio_prev_state & BIT(virq)))
1129                                 handle_nested_irq(irq);
1130                 } else {
1131                         /* Level Low */
1132
1133                         if (irq_type & IRQ_TYPE_LEVEL_LOW)
1134                                 handle_nested_irq(irq);
1135
1136                         if ((irq_type & IRQ_TYPE_EDGE_FALLING) &&
1137                             (dev->gpio_prev_state & BIT(virq)))
1138                                 handle_nested_irq(irq);
1139                 }
1140         }
1141
1142         dev->gpio_prev_state = gpio_mask;
1143
1144 exit:
1145         if (dev->gpio_poll)
1146                 schedule_delayed_work(&dev->gpio_poll_worker, 10);
1147 }
1148
1149
1150 static unsigned int cp2112_gpio_irq_startup(struct irq_data *d)
1151 {
1152         struct gpio_chip *gc = irq_data_get_irq_chip_data(d);
1153         struct cp2112_device *dev = gpiochip_get_data(gc);
1154
1155         INIT_DELAYED_WORK(&dev->gpio_poll_worker, cp2112_gpio_poll_callback);
1156
1157         if (!dev->gpio_poll) {
1158                 dev->gpio_poll = true;
1159                 schedule_delayed_work(&dev->gpio_poll_worker, 0);
1160         }
1161
1162         cp2112_gpio_irq_unmask(d);
1163         return 0;
1164 }
1165
1166 static void cp2112_gpio_irq_shutdown(struct irq_data *d)
1167 {
1168         struct gpio_chip *gc = irq_data_get_irq_chip_data(d);
1169         struct cp2112_device *dev = gpiochip_get_data(gc);
1170
1171         cancel_delayed_work_sync(&dev->gpio_poll_worker);
1172 }
1173
1174 static int cp2112_gpio_irq_type(struct irq_data *d, unsigned int type)
1175 {
1176         return 0;
1177 }
1178
1179 static int __maybe_unused cp2112_allocate_irq(struct cp2112_device *dev,
1180                                               int pin)
1181 {
1182         int ret;
1183
1184         if (dev->desc[pin])
1185                 return -EINVAL;
1186
1187         dev->desc[pin] = gpiochip_request_own_desc(&dev->gc, pin,
1188                                                    "HID/I2C:Event",
1189                                                    GPIO_ACTIVE_HIGH,
1190                                                    GPIOD_IN);
1191         if (IS_ERR(dev->desc[pin])) {
1192                 dev_err(dev->gc.parent, "Failed to request GPIO\n");
1193                 return PTR_ERR(dev->desc[pin]);
1194         }
1195
1196         ret = cp2112_gpio_direction_input(&dev->gc, pin);
1197         if (ret < 0) {
1198                 dev_err(dev->gc.parent, "Failed to set GPIO to input dir\n");
1199                 goto err_desc;
1200         }
1201
1202         ret = gpiochip_lock_as_irq(&dev->gc, pin);
1203         if (ret) {
1204                 dev_err(dev->gc.parent, "Failed to lock GPIO as interrupt\n");
1205                 goto err_desc;
1206         }
1207
1208         ret = gpiod_to_irq(dev->desc[pin]);
1209         if (ret < 0) {
1210                 dev_err(dev->gc.parent, "Failed to translate GPIO to IRQ\n");
1211                 goto err_lock;
1212         }
1213
1214         return ret;
1215
1216 err_lock:
1217         gpiochip_unlock_as_irq(&dev->gc, pin);
1218 err_desc:
1219         gpiochip_free_own_desc(dev->desc[pin]);
1220         dev->desc[pin] = NULL;
1221         return ret;
1222 }
1223
1224 static int cp2112_probe(struct hid_device *hdev, const struct hid_device_id *id)
1225 {
1226         struct cp2112_device *dev;
1227         u8 buf[3];
1228         struct cp2112_smbus_config_report config;
1229         struct gpio_irq_chip *girq;
1230         int ret;
1231
1232         dev = devm_kzalloc(&hdev->dev, sizeof(*dev), GFP_KERNEL);
1233         if (!dev)
1234                 return -ENOMEM;
1235
1236         dev->in_out_buffer = devm_kzalloc(&hdev->dev, CP2112_REPORT_MAX_LENGTH,
1237                                           GFP_KERNEL);
1238         if (!dev->in_out_buffer)
1239                 return -ENOMEM;
1240
1241         mutex_init(&dev->lock);
1242
1243         ret = hid_parse(hdev);
1244         if (ret) {
1245                 hid_err(hdev, "parse failed\n");
1246                 return ret;
1247         }
1248
1249         ret = hid_hw_start(hdev, HID_CONNECT_HIDRAW);
1250         if (ret) {
1251                 hid_err(hdev, "hw start failed\n");
1252                 return ret;
1253         }
1254
1255         ret = hid_hw_open(hdev);
1256         if (ret) {
1257                 hid_err(hdev, "hw open failed\n");
1258                 goto err_hid_stop;
1259         }
1260
1261         ret = hid_hw_power(hdev, PM_HINT_FULLON);
1262         if (ret < 0) {
1263                 hid_err(hdev, "power management error: %d\n", ret);
1264                 goto err_hid_close;
1265         }
1266
1267         ret = cp2112_hid_get(hdev, CP2112_GET_VERSION_INFO, buf, sizeof(buf),
1268                              HID_FEATURE_REPORT);
1269         if (ret != sizeof(buf)) {
1270                 hid_err(hdev, "error requesting version\n");
1271                 if (ret >= 0)
1272                         ret = -EIO;
1273                 goto err_power_normal;
1274         }
1275
1276         hid_info(hdev, "Part Number: 0x%02X Device Version: 0x%02X\n",
1277                  buf[1], buf[2]);
1278
1279         ret = cp2112_hid_get(hdev, CP2112_SMBUS_CONFIG, (u8 *)&config,
1280                              sizeof(config), HID_FEATURE_REPORT);
1281         if (ret != sizeof(config)) {
1282                 hid_err(hdev, "error requesting SMBus config\n");
1283                 if (ret >= 0)
1284                         ret = -EIO;
1285                 goto err_power_normal;
1286         }
1287
1288         config.retry_time = cpu_to_be16(1);
1289
1290         ret = cp2112_hid_output(hdev, (u8 *)&config, sizeof(config),
1291                                 HID_FEATURE_REPORT);
1292         if (ret != sizeof(config)) {
1293                 hid_err(hdev, "error setting SMBus config\n");
1294                 if (ret >= 0)
1295                         ret = -EIO;
1296                 goto err_power_normal;
1297         }
1298
1299         hid_set_drvdata(hdev, (void *)dev);
1300         dev->hdev               = hdev;
1301         dev->adap.owner         = THIS_MODULE;
1302         dev->adap.class         = I2C_CLASS_HWMON;
1303         dev->adap.algo          = &smbus_algorithm;
1304         dev->adap.algo_data     = dev;
1305         dev->adap.dev.parent    = &hdev->dev;
1306         snprintf(dev->adap.name, sizeof(dev->adap.name),
1307                  "CP2112 SMBus Bridge on hidraw%d",
1308                  ((struct hidraw *)hdev->hidraw)->minor);
1309         dev->hwversion = buf[2];
1310         init_waitqueue_head(&dev->wait);
1311
1312         hid_device_io_start(hdev);
1313         ret = i2c_add_adapter(&dev->adap);
1314         hid_device_io_stop(hdev);
1315
1316         if (ret) {
1317                 hid_err(hdev, "error registering i2c adapter\n");
1318                 goto err_power_normal;
1319         }
1320
1321         hid_dbg(hdev, "adapter registered\n");
1322
1323         dev->gc.label                   = "cp2112_gpio";
1324         dev->gc.direction_input         = cp2112_gpio_direction_input;
1325         dev->gc.direction_output        = cp2112_gpio_direction_output;
1326         dev->gc.set                     = cp2112_gpio_set;
1327         dev->gc.get                     = cp2112_gpio_get;
1328         dev->gc.base                    = -1;
1329         dev->gc.ngpio                   = 8;
1330         dev->gc.can_sleep               = 1;
1331         dev->gc.parent                  = &hdev->dev;
1332
1333         dev->irq.name = "cp2112-gpio";
1334         dev->irq.irq_startup = cp2112_gpio_irq_startup;
1335         dev->irq.irq_shutdown = cp2112_gpio_irq_shutdown;
1336         dev->irq.irq_ack = cp2112_gpio_irq_ack;
1337         dev->irq.irq_mask = cp2112_gpio_irq_mask;
1338         dev->irq.irq_unmask = cp2112_gpio_irq_unmask;
1339         dev->irq.irq_set_type = cp2112_gpio_irq_type;
1340         dev->irq.flags = IRQCHIP_MASK_ON_SUSPEND;
1341
1342         girq = &dev->gc.irq;
1343         girq->chip = &dev->irq;
1344         /* The event comes from the outside so no parent handler */
1345         girq->parent_handler = NULL;
1346         girq->num_parents = 0;
1347         girq->parents = NULL;
1348         girq->default_type = IRQ_TYPE_NONE;
1349         girq->handler = handle_simple_irq;
1350
1351         ret = gpiochip_add_data(&dev->gc, dev);
1352         if (ret < 0) {
1353                 hid_err(hdev, "error registering gpio chip\n");
1354                 goto err_free_i2c;
1355         }
1356
1357         ret = sysfs_create_group(&hdev->dev.kobj, &cp2112_attr_group);
1358         if (ret < 0) {
1359                 hid_err(hdev, "error creating sysfs attrs\n");
1360                 goto err_gpiochip_remove;
1361         }
1362
1363         chmod_sysfs_attrs(hdev);
1364         hid_hw_power(hdev, PM_HINT_NORMAL);
1365
1366         return ret;
1367
1368 err_gpiochip_remove:
1369         gpiochip_remove(&dev->gc);
1370 err_free_i2c:
1371         i2c_del_adapter(&dev->adap);
1372 err_power_normal:
1373         hid_hw_power(hdev, PM_HINT_NORMAL);
1374 err_hid_close:
1375         hid_hw_close(hdev);
1376 err_hid_stop:
1377         hid_hw_stop(hdev);
1378         return ret;
1379 }
1380
1381 static void cp2112_remove(struct hid_device *hdev)
1382 {
1383         struct cp2112_device *dev = hid_get_drvdata(hdev);
1384         int i;
1385
1386         sysfs_remove_group(&hdev->dev.kobj, &cp2112_attr_group);
1387         i2c_del_adapter(&dev->adap);
1388
1389         if (dev->gpio_poll) {
1390                 dev->gpio_poll = false;
1391                 cancel_delayed_work_sync(&dev->gpio_poll_worker);
1392         }
1393
1394         for (i = 0; i < ARRAY_SIZE(dev->desc); i++) {
1395                 gpiochip_unlock_as_irq(&dev->gc, i);
1396                 gpiochip_free_own_desc(dev->desc[i]);
1397         }
1398
1399         gpiochip_remove(&dev->gc);
1400         /* i2c_del_adapter has finished removing all i2c devices from our
1401          * adapter. Well behaved devices should no longer call our cp2112_xfer
1402          * and should have waited for any pending calls to finish. It has also
1403          * waited for device_unregister(&adap->dev) to complete. Therefore we
1404          * can safely free our struct cp2112_device.
1405          */
1406         hid_hw_close(hdev);
1407         hid_hw_stop(hdev);
1408 }
1409
1410 static int cp2112_raw_event(struct hid_device *hdev, struct hid_report *report,
1411                             u8 *data, int size)
1412 {
1413         struct cp2112_device *dev = hid_get_drvdata(hdev);
1414         struct cp2112_xfer_status_report *xfer = (void *)data;
1415
1416         switch (data[0]) {
1417         case CP2112_TRANSFER_STATUS_RESPONSE:
1418                 hid_dbg(hdev, "xfer status: %02x %02x %04x %04x\n",
1419                         xfer->status0, xfer->status1,
1420                         be16_to_cpu(xfer->retries), be16_to_cpu(xfer->length));
1421
1422                 switch (xfer->status0) {
1423                 case STATUS0_IDLE:
1424                         dev->xfer_status = -EAGAIN;
1425                         break;
1426                 case STATUS0_BUSY:
1427                         dev->xfer_status = -EBUSY;
1428                         break;
1429                 case STATUS0_COMPLETE:
1430                         dev->xfer_status = be16_to_cpu(xfer->length);
1431                         break;
1432                 case STATUS0_ERROR:
1433                         switch (xfer->status1) {
1434                         case STATUS1_TIMEOUT_NACK:
1435                         case STATUS1_TIMEOUT_BUS:
1436                                 dev->xfer_status = -ETIMEDOUT;
1437                                 break;
1438                         default:
1439                                 dev->xfer_status = -EIO;
1440                                 break;
1441                         }
1442                         break;
1443                 default:
1444                         dev->xfer_status = -EINVAL;
1445                         break;
1446                 }
1447
1448                 atomic_set(&dev->xfer_avail, 1);
1449                 break;
1450         case CP2112_DATA_READ_RESPONSE:
1451                 hid_dbg(hdev, "read response: %02x %02x\n", data[1], data[2]);
1452
1453                 dev->read_length = data[2];
1454                 if (dev->read_length > sizeof(dev->read_data))
1455                         dev->read_length = sizeof(dev->read_data);
1456
1457                 memcpy(dev->read_data, &data[3], dev->read_length);
1458                 atomic_set(&dev->read_avail, 1);
1459                 break;
1460         default:
1461                 hid_err(hdev, "unknown report\n");
1462
1463                 return 0;
1464         }
1465
1466         wake_up_interruptible(&dev->wait);
1467         return 1;
1468 }
1469
1470 static struct hid_driver cp2112_driver = {
1471         .name           = "cp2112",
1472         .id_table       = cp2112_devices,
1473         .probe          = cp2112_probe,
1474         .remove         = cp2112_remove,
1475         .raw_event      = cp2112_raw_event,
1476 };
1477
1478 module_hid_driver(cp2112_driver);
1479 MODULE_DESCRIPTION("Silicon Labs HID USB to SMBus master bridge");
1480 MODULE_AUTHOR("David Barksdale <dbarksdale@uplogix.com>");
1481 MODULE_LICENSE("GPL");
1482