Merge tag 'asoc-fix-v5.19-rc3' of https://git.kernel.org/pub/scm/linux/kernel/git...
[linux-2.6-microblaze.git] / drivers / gpu / ipu-v3 / ipu-di.c
1 // SPDX-License-Identifier: GPL-2.0-or-later
2 /*
3  * Copyright (c) 2010 Sascha Hauer <s.hauer@pengutronix.de>
4  * Copyright (C) 2005-2009 Freescale Semiconductor, Inc.
5  */
6 #include <linux/export.h>
7 #include <linux/module.h>
8 #include <linux/types.h>
9 #include <linux/errno.h>
10 #include <linux/io.h>
11 #include <linux/err.h>
12 #include <linux/platform_device.h>
13
14 #include <video/imx-ipu-v3.h>
15 #include "ipu-prv.h"
16
17 struct ipu_di {
18         void __iomem *base;
19         int id;
20         u32 module;
21         struct clk *clk_di;     /* display input clock */
22         struct clk *clk_ipu;    /* IPU bus clock */
23         struct clk *clk_di_pixel; /* resulting pixel clock */
24         bool inuse;
25         struct ipu_soc *ipu;
26 };
27
28 static DEFINE_MUTEX(di_mutex);
29
30 struct di_sync_config {
31         int run_count;
32         int run_src;
33         int offset_count;
34         int offset_src;
35         int repeat_count;
36         int cnt_clr_src;
37         int cnt_polarity_gen_en;
38         int cnt_polarity_clr_src;
39         int cnt_polarity_trigger_src;
40         int cnt_up;
41         int cnt_down;
42 };
43
44 enum di_pins {
45         DI_PIN11 = 0,
46         DI_PIN12 = 1,
47         DI_PIN13 = 2,
48         DI_PIN14 = 3,
49         DI_PIN15 = 4,
50         DI_PIN16 = 5,
51         DI_PIN17 = 6,
52         DI_PIN_CS = 7,
53
54         DI_PIN_SER_CLK = 0,
55         DI_PIN_SER_RS = 1,
56 };
57
58 enum di_sync_wave {
59         DI_SYNC_NONE = 0,
60         DI_SYNC_CLK = 1,
61         DI_SYNC_INT_HSYNC = 2,
62         DI_SYNC_HSYNC = 3,
63         DI_SYNC_VSYNC = 4,
64         DI_SYNC_DE = 6,
65
66         DI_SYNC_CNT1 = 2,       /* counter >= 2 only */
67         DI_SYNC_CNT4 = 5,       /* counter >= 5 only */
68         DI_SYNC_CNT5 = 6,       /* counter >= 6 only */
69 };
70
71 #define SYNC_WAVE 0
72
73 #define DI_GENERAL              0x0000
74 #define DI_BS_CLKGEN0           0x0004
75 #define DI_BS_CLKGEN1           0x0008
76 #define DI_SW_GEN0(gen)         (0x000c + 4 * ((gen) - 1))
77 #define DI_SW_GEN1(gen)         (0x0030 + 4 * ((gen) - 1))
78 #define DI_STP_REP(gen)         (0x0148 + 4 * (((gen) - 1)/2))
79 #define DI_SYNC_AS_GEN          0x0054
80 #define DI_DW_GEN(gen)          (0x0058 + 4 * (gen))
81 #define DI_DW_SET(gen, set)     (0x0088 + 4 * ((gen) + 0xc * (set)))
82 #define DI_SER_CONF             0x015c
83 #define DI_SSC                  0x0160
84 #define DI_POL                  0x0164
85 #define DI_AW0                  0x0168
86 #define DI_AW1                  0x016c
87 #define DI_SCR_CONF             0x0170
88 #define DI_STAT                 0x0174
89
90 #define DI_SW_GEN0_RUN_COUNT(x)                 ((x) << 19)
91 #define DI_SW_GEN0_RUN_SRC(x)                   ((x) << 16)
92 #define DI_SW_GEN0_OFFSET_COUNT(x)              ((x) << 3)
93 #define DI_SW_GEN0_OFFSET_SRC(x)                ((x) << 0)
94
95 #define DI_SW_GEN1_CNT_POL_GEN_EN(x)            ((x) << 29)
96 #define DI_SW_GEN1_CNT_CLR_SRC(x)               ((x) << 25)
97 #define DI_SW_GEN1_CNT_POL_TRIGGER_SRC(x)       ((x) << 12)
98 #define DI_SW_GEN1_CNT_POL_CLR_SRC(x)           ((x) << 9)
99 #define DI_SW_GEN1_CNT_DOWN(x)                  ((x) << 16)
100 #define DI_SW_GEN1_CNT_UP(x)                    (x)
101 #define DI_SW_GEN1_AUTO_RELOAD                  (0x10000000)
102
103 #define DI_DW_GEN_ACCESS_SIZE_OFFSET            24
104 #define DI_DW_GEN_COMPONENT_SIZE_OFFSET         16
105
106 #define DI_GEN_POLARITY_1                       (1 << 0)
107 #define DI_GEN_POLARITY_2                       (1 << 1)
108 #define DI_GEN_POLARITY_3                       (1 << 2)
109 #define DI_GEN_POLARITY_4                       (1 << 3)
110 #define DI_GEN_POLARITY_5                       (1 << 4)
111 #define DI_GEN_POLARITY_6                       (1 << 5)
112 #define DI_GEN_POLARITY_7                       (1 << 6)
113 #define DI_GEN_POLARITY_8                       (1 << 7)
114 #define DI_GEN_POLARITY_DISP_CLK                (1 << 17)
115 #define DI_GEN_DI_CLK_EXT                       (1 << 20)
116 #define DI_GEN_DI_VSYNC_EXT                     (1 << 21)
117
118 #define DI_POL_DRDY_DATA_POLARITY               (1 << 7)
119 #define DI_POL_DRDY_POLARITY_15                 (1 << 4)
120
121 #define DI_VSYNC_SEL_OFFSET                     13
122
123 static inline u32 ipu_di_read(struct ipu_di *di, unsigned offset)
124 {
125         return readl(di->base + offset);
126 }
127
128 static inline void ipu_di_write(struct ipu_di *di, u32 value, unsigned offset)
129 {
130         writel(value, di->base + offset);
131 }
132
133 static void ipu_di_data_wave_config(struct ipu_di *di,
134                                      int wave_gen,
135                                      int access_size, int component_size)
136 {
137         u32 reg;
138         reg = (access_size << DI_DW_GEN_ACCESS_SIZE_OFFSET) |
139             (component_size << DI_DW_GEN_COMPONENT_SIZE_OFFSET);
140         ipu_di_write(di, reg, DI_DW_GEN(wave_gen));
141 }
142
143 static void ipu_di_data_pin_config(struct ipu_di *di, int wave_gen, int di_pin,
144                 int set, int up, int down)
145 {
146         u32 reg;
147
148         reg = ipu_di_read(di, DI_DW_GEN(wave_gen));
149         reg &= ~(0x3 << (di_pin * 2));
150         reg |= set << (di_pin * 2);
151         ipu_di_write(di, reg, DI_DW_GEN(wave_gen));
152
153         ipu_di_write(di, (down << 16) | up, DI_DW_SET(wave_gen, set));
154 }
155
156 static void ipu_di_sync_config(struct ipu_di *di, struct di_sync_config *config,
157                 int start, int count)
158 {
159         u32 reg;
160         int i;
161
162         for (i = 0; i < count; i++) {
163                 struct di_sync_config *c = &config[i];
164                 int wave_gen = start + i + 1;
165
166                 if ((c->run_count >= 0x1000) || (c->offset_count >= 0x1000) ||
167                                 (c->repeat_count >= 0x1000) ||
168                                 (c->cnt_up >= 0x400) ||
169                                 (c->cnt_down >= 0x400)) {
170                         dev_err(di->ipu->dev, "DI%d counters out of range.\n",
171                                         di->id);
172                         return;
173                 }
174
175                 reg = DI_SW_GEN0_RUN_COUNT(c->run_count) |
176                         DI_SW_GEN0_RUN_SRC(c->run_src) |
177                         DI_SW_GEN0_OFFSET_COUNT(c->offset_count) |
178                         DI_SW_GEN0_OFFSET_SRC(c->offset_src);
179                 ipu_di_write(di, reg, DI_SW_GEN0(wave_gen));
180
181                 reg = DI_SW_GEN1_CNT_POL_GEN_EN(c->cnt_polarity_gen_en) |
182                         DI_SW_GEN1_CNT_CLR_SRC(c->cnt_clr_src) |
183                         DI_SW_GEN1_CNT_POL_TRIGGER_SRC(
184                                         c->cnt_polarity_trigger_src) |
185                         DI_SW_GEN1_CNT_POL_CLR_SRC(c->cnt_polarity_clr_src) |
186                         DI_SW_GEN1_CNT_DOWN(c->cnt_down) |
187                         DI_SW_GEN1_CNT_UP(c->cnt_up);
188
189                 /* Enable auto reload */
190                 if (c->repeat_count == 0)
191                         reg |= DI_SW_GEN1_AUTO_RELOAD;
192
193                 ipu_di_write(di, reg, DI_SW_GEN1(wave_gen));
194
195                 reg = ipu_di_read(di, DI_STP_REP(wave_gen));
196                 reg &= ~(0xffff << (16 * ((wave_gen - 1) & 0x1)));
197                 reg |= c->repeat_count << (16 * ((wave_gen - 1) & 0x1));
198                 ipu_di_write(di, reg, DI_STP_REP(wave_gen));
199         }
200 }
201
202 static void ipu_di_sync_config_interlaced(struct ipu_di *di,
203                 struct ipu_di_signal_cfg *sig)
204 {
205         u32 h_total = sig->mode.hactive + sig->mode.hsync_len +
206                 sig->mode.hback_porch + sig->mode.hfront_porch;
207         u32 v_total = sig->mode.vactive + sig->mode.vsync_len +
208                 sig->mode.vback_porch + sig->mode.vfront_porch;
209         struct di_sync_config cfg[] = {
210                 {
211                         /* 1: internal VSYNC for each frame */
212                         .run_count = v_total * 2 - 1,
213                         .run_src = 3,                   /* == counter 7 */
214                 }, {
215                         /* PIN2: HSYNC waveform */
216                         .run_count = h_total - 1,
217                         .run_src = DI_SYNC_CLK,
218                         .cnt_polarity_gen_en = 1,
219                         .cnt_polarity_trigger_src = DI_SYNC_CLK,
220                         .cnt_down = sig->mode.hsync_len * 2,
221                 }, {
222                         /* PIN3: VSYNC waveform */
223                         .run_count = v_total - 1,
224                         .run_src = 4,                   /* == counter 7 */
225                         .cnt_polarity_gen_en = 1,
226                         .cnt_polarity_trigger_src = 4,  /* == counter 7 */
227                         .cnt_down = sig->mode.vsync_len * 2,
228                         .cnt_clr_src = DI_SYNC_CNT1,
229                 }, {
230                         /* 4: Field */
231                         .run_count = v_total / 2,
232                         .run_src = DI_SYNC_HSYNC,
233                         .offset_count = h_total / 2,
234                         .offset_src = DI_SYNC_CLK,
235                         .repeat_count = 2,
236                         .cnt_clr_src = DI_SYNC_CNT1,
237                 }, {
238                         /* 5: Active lines */
239                         .run_src = DI_SYNC_HSYNC,
240                         .offset_count = (sig->mode.vsync_len +
241                                          sig->mode.vback_porch) / 2,
242                         .offset_src = DI_SYNC_HSYNC,
243                         .repeat_count = sig->mode.vactive / 2,
244                         .cnt_clr_src = DI_SYNC_CNT4,
245                 }, {
246                         /* 6: Active pixel, referenced by DC */
247                         .run_src = DI_SYNC_CLK,
248                         .offset_count = sig->mode.hsync_len +
249                                         sig->mode.hback_porch,
250                         .offset_src = DI_SYNC_CLK,
251                         .repeat_count = sig->mode.hactive,
252                         .cnt_clr_src = DI_SYNC_CNT5,
253                 }, {
254                         /* 7: Half line HSYNC */
255                         .run_count = h_total / 2 - 1,
256                         .run_src = DI_SYNC_CLK,
257                 }
258         };
259
260         ipu_di_sync_config(di, cfg, 0, ARRAY_SIZE(cfg));
261
262         ipu_di_write(di, v_total / 2 - 1, DI_SCR_CONF);
263 }
264
265 static void ipu_di_sync_config_noninterlaced(struct ipu_di *di,
266                 struct ipu_di_signal_cfg *sig, int div)
267 {
268         u32 h_total = sig->mode.hactive + sig->mode.hsync_len +
269                 sig->mode.hback_porch + sig->mode.hfront_porch;
270         u32 v_total = sig->mode.vactive + sig->mode.vsync_len +
271                 sig->mode.vback_porch + sig->mode.vfront_porch;
272         struct di_sync_config cfg[] = {
273                 {
274                         /* 1: INT_HSYNC */
275                         .run_count = h_total - 1,
276                         .run_src = DI_SYNC_CLK,
277                 } , {
278                         /* PIN2: HSYNC */
279                         .run_count = h_total - 1,
280                         .run_src = DI_SYNC_CLK,
281                         .offset_count = div * sig->v_to_h_sync,
282                         .offset_src = DI_SYNC_CLK,
283                         .cnt_polarity_gen_en = 1,
284                         .cnt_polarity_trigger_src = DI_SYNC_CLK,
285                         .cnt_down = sig->mode.hsync_len * 2,
286                 } , {
287                         /* PIN3: VSYNC */
288                         .run_count = v_total - 1,
289                         .run_src = DI_SYNC_INT_HSYNC,
290                         .cnt_polarity_gen_en = 1,
291                         .cnt_polarity_trigger_src = DI_SYNC_INT_HSYNC,
292                         .cnt_down = sig->mode.vsync_len * 2,
293                 } , {
294                         /* 4: Line Active */
295                         .run_src = DI_SYNC_HSYNC,
296                         .offset_count = sig->mode.vsync_len +
297                                         sig->mode.vback_porch,
298                         .offset_src = DI_SYNC_HSYNC,
299                         .repeat_count = sig->mode.vactive,
300                         .cnt_clr_src = DI_SYNC_VSYNC,
301                 } , {
302                         /* 5: Pixel Active, referenced by DC */
303                         .run_src = DI_SYNC_CLK,
304                         .offset_count = sig->mode.hsync_len +
305                                         sig->mode.hback_porch,
306                         .offset_src = DI_SYNC_CLK,
307                         .repeat_count = sig->mode.hactive,
308                         .cnt_clr_src = 5, /* Line Active */
309                 } , {
310                         /* unused */
311                 } , {
312                         /* unused */
313                 },
314         };
315         /* can't use #7 and #8 for line active and pixel active counters */
316         struct di_sync_config cfg_vga[] = {
317                 {
318                         /* 1: INT_HSYNC */
319                         .run_count = h_total - 1,
320                         .run_src = DI_SYNC_CLK,
321                 } , {
322                         /* 2: VSYNC */
323                         .run_count = v_total - 1,
324                         .run_src = DI_SYNC_INT_HSYNC,
325                 } , {
326                         /* 3: Line Active */
327                         .run_src = DI_SYNC_INT_HSYNC,
328                         .offset_count = sig->mode.vsync_len +
329                                         sig->mode.vback_porch,
330                         .offset_src = DI_SYNC_INT_HSYNC,
331                         .repeat_count = sig->mode.vactive,
332                         .cnt_clr_src = 3 /* VSYNC */,
333                 } , {
334                         /* PIN4: HSYNC for VGA via TVEv2 on TQ MBa53 */
335                         .run_count = h_total - 1,
336                         .run_src = DI_SYNC_CLK,
337                         .offset_count = div * sig->v_to_h_sync + 18, /* magic value from Freescale TVE driver */
338                         .offset_src = DI_SYNC_CLK,
339                         .cnt_polarity_gen_en = 1,
340                         .cnt_polarity_trigger_src = DI_SYNC_CLK,
341                         .cnt_down = sig->mode.hsync_len * 2,
342                 } , {
343                         /* 5: Pixel Active signal to DC */
344                         .run_src = DI_SYNC_CLK,
345                         .offset_count = sig->mode.hsync_len +
346                                         sig->mode.hback_porch,
347                         .offset_src = DI_SYNC_CLK,
348                         .repeat_count = sig->mode.hactive,
349                         .cnt_clr_src = 4, /* Line Active */
350                 } , {
351                         /* PIN6: VSYNC for VGA via TVEv2 on TQ MBa53 */
352                         .run_count = v_total - 1,
353                         .run_src = DI_SYNC_INT_HSYNC,
354                         .offset_count = 1, /* magic value from Freescale TVE driver */
355                         .offset_src = DI_SYNC_INT_HSYNC,
356                         .cnt_polarity_gen_en = 1,
357                         .cnt_polarity_trigger_src = DI_SYNC_INT_HSYNC,
358                         .cnt_down = sig->mode.vsync_len * 2,
359                 } , {
360                         /* PIN4: HSYNC for VGA via TVEv2 on i.MX53-QSB */
361                         .run_count = h_total - 1,
362                         .run_src = DI_SYNC_CLK,
363                         .offset_count = div * sig->v_to_h_sync + 18, /* magic value from Freescale TVE driver */
364                         .offset_src = DI_SYNC_CLK,
365                         .cnt_polarity_gen_en = 1,
366                         .cnt_polarity_trigger_src = DI_SYNC_CLK,
367                         .cnt_down = sig->mode.hsync_len * 2,
368                 } , {
369                         /* PIN6: VSYNC for VGA via TVEv2 on i.MX53-QSB */
370                         .run_count = v_total - 1,
371                         .run_src = DI_SYNC_INT_HSYNC,
372                         .offset_count = 1, /* magic value from Freescale TVE driver */
373                         .offset_src = DI_SYNC_INT_HSYNC,
374                         .cnt_polarity_gen_en = 1,
375                         .cnt_polarity_trigger_src = DI_SYNC_INT_HSYNC,
376                         .cnt_down = sig->mode.vsync_len * 2,
377                 } , {
378                         /* unused */
379                 },
380         };
381
382         ipu_di_write(di, v_total - 1, DI_SCR_CONF);
383         if (sig->hsync_pin == 2 && sig->vsync_pin == 3)
384                 ipu_di_sync_config(di, cfg, 0, ARRAY_SIZE(cfg));
385         else
386                 ipu_di_sync_config(di, cfg_vga, 0, ARRAY_SIZE(cfg_vga));
387 }
388
389 static void ipu_di_config_clock(struct ipu_di *di,
390         const struct ipu_di_signal_cfg *sig)
391 {
392         struct clk *clk;
393         unsigned clkgen0;
394         uint32_t val;
395
396         if (sig->clkflags & IPU_DI_CLKMODE_EXT) {
397                 /*
398                  * CLKMODE_EXT means we must use the DI clock: this is
399                  * needed for things like LVDS which needs to feed the
400                  * DI and LDB with the same pixel clock.
401                  */
402                 clk = di->clk_di;
403
404                 if (sig->clkflags & IPU_DI_CLKMODE_SYNC) {
405                         /*
406                          * CLKMODE_SYNC means that we want the DI to be
407                          * clocked at the same rate as the parent clock.
408                          * This is needed (eg) for LDB which needs to be
409                          * fed with the same pixel clock.  We assume that
410                          * the LDB clock has already been set correctly.
411                          */
412                         clkgen0 = 1 << 4;
413                 } else {
414                         /*
415                          * We can use the divider.  We should really have
416                          * a flag here indicating whether the bridge can
417                          * cope with a fractional divider or not.  For the
418                          * time being, let's go for simplicitly and
419                          * reliability.
420                          */
421                         unsigned long in_rate;
422                         unsigned div;
423
424                         clk_set_rate(clk, sig->mode.pixelclock);
425
426                         in_rate = clk_get_rate(clk);
427                         div = DIV_ROUND_CLOSEST(in_rate, sig->mode.pixelclock);
428                         div = clamp(div, 1U, 255U);
429
430                         clkgen0 = div << 4;
431                 }
432         } else {
433                 /*
434                  * For other interfaces, we can arbitarily select between
435                  * the DI specific clock and the internal IPU clock.  See
436                  * DI_GENERAL bit 20.  We select the IPU clock if it can
437                  * give us a clock rate within 1% of the requested frequency,
438                  * otherwise we use the DI clock.
439                  */
440                 unsigned long rate, clkrate;
441                 unsigned div, error;
442
443                 clkrate = clk_get_rate(di->clk_ipu);
444                 div = DIV_ROUND_CLOSEST(clkrate, sig->mode.pixelclock);
445                 div = clamp(div, 1U, 255U);
446                 rate = clkrate / div;
447
448                 error = rate / (sig->mode.pixelclock / 1000);
449
450                 dev_dbg(di->ipu->dev, "  IPU clock can give %lu with divider %u, error %c%d.%d%%\n",
451                         rate, div, error < 1000 ? '-' : '+',
452                         abs(error - 1000) / 10, abs(error - 1000) % 10);
453
454                 /* Allow a 1% error */
455                 if (error < 1010 && error >= 990) {
456                         clk = di->clk_ipu;
457
458                         clkgen0 = div << 4;
459                 } else {
460                         unsigned long in_rate;
461                         unsigned div;
462
463                         clk = di->clk_di;
464
465                         clk_set_rate(clk, sig->mode.pixelclock);
466
467                         in_rate = clk_get_rate(clk);
468                         div = DIV_ROUND_CLOSEST(in_rate, sig->mode.pixelclock);
469                         div = clamp(div, 1U, 255U);
470
471                         clkgen0 = div << 4;
472                 }
473         }
474
475         di->clk_di_pixel = clk;
476
477         /* Set the divider */
478         ipu_di_write(di, clkgen0, DI_BS_CLKGEN0);
479
480         /*
481          * Set the high/low periods.  Bits 24:16 give us the falling edge,
482          * and bits 8:0 give the rising edge.  LSB is fraction, and is
483          * based on the divider above.  We want a 50% duty cycle, so set
484          * the falling edge to be half the divider.
485          */
486         ipu_di_write(di, (clkgen0 >> 4) << 16, DI_BS_CLKGEN1);
487
488         /* Finally select the input clock */
489         val = ipu_di_read(di, DI_GENERAL) & ~DI_GEN_DI_CLK_EXT;
490         if (clk == di->clk_di)
491                 val |= DI_GEN_DI_CLK_EXT;
492         ipu_di_write(di, val, DI_GENERAL);
493
494         dev_dbg(di->ipu->dev, "Want %luHz IPU %luHz DI %luHz using %s, %luHz\n",
495                 sig->mode.pixelclock,
496                 clk_get_rate(di->clk_ipu),
497                 clk_get_rate(di->clk_di),
498                 clk == di->clk_di ? "DI" : "IPU",
499                 clk_get_rate(di->clk_di_pixel) / (clkgen0 >> 4));
500 }
501
502 /*
503  * This function is called to adjust a video mode to IPU restrictions.
504  * It is meant to be called from drm crtc mode_fixup() methods.
505  */
506 int ipu_di_adjust_videomode(struct ipu_di *di, struct videomode *mode)
507 {
508         u32 diff;
509
510         if (!IS_ALIGNED(mode->hactive, 8) &&
511             mode->hfront_porch < ALIGN(mode->hactive, 8) - mode->hactive) {
512                 dev_err(di->ipu->dev, "hactive %d is not aligned to 8 and front porch is too small to compensate\n",
513                         mode->hactive);
514                 return -EINVAL;
515         }
516
517         if (mode->vfront_porch >= 2)
518                 return 0;
519
520         diff = 2 - mode->vfront_porch;
521
522         if (mode->vback_porch >= diff) {
523                 mode->vfront_porch = 2;
524                 mode->vback_porch -= diff;
525         } else if (mode->vsync_len > diff) {
526                 mode->vfront_porch = 2;
527                 mode->vsync_len = mode->vsync_len - diff;
528         } else {
529                 dev_warn(di->ipu->dev, "failed to adjust videomode\n");
530                 return -EINVAL;
531         }
532
533         dev_dbg(di->ipu->dev, "videomode adapted for IPU restrictions\n");
534         return 0;
535 }
536 EXPORT_SYMBOL_GPL(ipu_di_adjust_videomode);
537
538 static u32 ipu_di_gen_polarity(int pin)
539 {
540         switch (pin) {
541         case 1:
542                 return DI_GEN_POLARITY_1;
543         case 2:
544                 return DI_GEN_POLARITY_2;
545         case 3:
546                 return DI_GEN_POLARITY_3;
547         case 4:
548                 return DI_GEN_POLARITY_4;
549         case 5:
550                 return DI_GEN_POLARITY_5;
551         case 6:
552                 return DI_GEN_POLARITY_6;
553         case 7:
554                 return DI_GEN_POLARITY_7;
555         case 8:
556                 return DI_GEN_POLARITY_8;
557         }
558         return 0;
559 }
560
561 int ipu_di_init_sync_panel(struct ipu_di *di, struct ipu_di_signal_cfg *sig)
562 {
563         u32 reg;
564         u32 di_gen, vsync_cnt;
565         u32 div;
566
567         dev_dbg(di->ipu->dev, "disp %d: panel size = %d x %d\n",
568                 di->id, sig->mode.hactive, sig->mode.vactive);
569
570         dev_dbg(di->ipu->dev, "Clocks: IPU %luHz DI %luHz Needed %luHz\n",
571                 clk_get_rate(di->clk_ipu),
572                 clk_get_rate(di->clk_di),
573                 sig->mode.pixelclock);
574
575         mutex_lock(&di_mutex);
576
577         ipu_di_config_clock(di, sig);
578
579         div = ipu_di_read(di, DI_BS_CLKGEN0) & 0xfff;
580         div = div / 16;         /* Now divider is integer portion */
581
582         /* Setup pixel clock timing */
583         /* Down time is half of period */
584         ipu_di_write(di, (div << 16), DI_BS_CLKGEN1);
585
586         ipu_di_data_wave_config(di, SYNC_WAVE, div - 1, div - 1);
587         ipu_di_data_pin_config(di, SYNC_WAVE, DI_PIN15, 3, 0, div * 2);
588
589         di_gen = ipu_di_read(di, DI_GENERAL) & DI_GEN_DI_CLK_EXT;
590         di_gen |= DI_GEN_DI_VSYNC_EXT;
591
592         if (sig->mode.flags & DISPLAY_FLAGS_INTERLACED) {
593                 ipu_di_sync_config_interlaced(di, sig);
594
595                 /* set y_sel = 1 */
596                 di_gen |= 0x10000000;
597
598                 vsync_cnt = 3;
599         } else {
600                 ipu_di_sync_config_noninterlaced(di, sig, div);
601
602                 vsync_cnt = 3;
603                 if (di->id == 1)
604                         /*
605                          * TODO: change only for TVEv2, parallel display
606                          * uses pin 2 / 3
607                          */
608                         if (!(sig->hsync_pin == 2 && sig->vsync_pin == 3))
609                                 vsync_cnt = 6;
610         }
611
612         if (sig->mode.flags & DISPLAY_FLAGS_HSYNC_HIGH)
613                 di_gen |= ipu_di_gen_polarity(sig->hsync_pin);
614         if (sig->mode.flags & DISPLAY_FLAGS_VSYNC_HIGH)
615                 di_gen |= ipu_di_gen_polarity(sig->vsync_pin);
616
617         if (sig->clk_pol)
618                 di_gen |= DI_GEN_POLARITY_DISP_CLK;
619
620         ipu_di_write(di, di_gen, DI_GENERAL);
621
622         ipu_di_write(di, (--vsync_cnt << DI_VSYNC_SEL_OFFSET) | 0x00000002,
623                      DI_SYNC_AS_GEN);
624
625         reg = ipu_di_read(di, DI_POL);
626         reg &= ~(DI_POL_DRDY_DATA_POLARITY | DI_POL_DRDY_POLARITY_15);
627
628         if (sig->enable_pol)
629                 reg |= DI_POL_DRDY_POLARITY_15;
630         if (sig->data_pol)
631                 reg |= DI_POL_DRDY_DATA_POLARITY;
632
633         ipu_di_write(di, reg, DI_POL);
634
635         mutex_unlock(&di_mutex);
636
637         return 0;
638 }
639 EXPORT_SYMBOL_GPL(ipu_di_init_sync_panel);
640
641 int ipu_di_enable(struct ipu_di *di)
642 {
643         int ret;
644
645         WARN_ON(IS_ERR(di->clk_di_pixel));
646
647         ret = clk_prepare_enable(di->clk_di_pixel);
648         if (ret)
649                 return ret;
650
651         ipu_module_enable(di->ipu, di->module);
652
653         return 0;
654 }
655 EXPORT_SYMBOL_GPL(ipu_di_enable);
656
657 int ipu_di_disable(struct ipu_di *di)
658 {
659         WARN_ON(IS_ERR(di->clk_di_pixel));
660
661         ipu_module_disable(di->ipu, di->module);
662
663         clk_disable_unprepare(di->clk_di_pixel);
664
665         return 0;
666 }
667 EXPORT_SYMBOL_GPL(ipu_di_disable);
668
669 int ipu_di_get_num(struct ipu_di *di)
670 {
671         return di->id;
672 }
673 EXPORT_SYMBOL_GPL(ipu_di_get_num);
674
675 static DEFINE_MUTEX(ipu_di_lock);
676
677 struct ipu_di *ipu_di_get(struct ipu_soc *ipu, int disp)
678 {
679         struct ipu_di *di;
680
681         if (disp > 1)
682                 return ERR_PTR(-EINVAL);
683
684         di = ipu->di_priv[disp];
685
686         mutex_lock(&ipu_di_lock);
687
688         if (di->inuse) {
689                 di = ERR_PTR(-EBUSY);
690                 goto out;
691         }
692
693         di->inuse = true;
694 out:
695         mutex_unlock(&ipu_di_lock);
696
697         return di;
698 }
699 EXPORT_SYMBOL_GPL(ipu_di_get);
700
701 void ipu_di_put(struct ipu_di *di)
702 {
703         mutex_lock(&ipu_di_lock);
704
705         di->inuse = false;
706
707         mutex_unlock(&ipu_di_lock);
708 }
709 EXPORT_SYMBOL_GPL(ipu_di_put);
710
711 int ipu_di_init(struct ipu_soc *ipu, struct device *dev, int id,
712                 unsigned long base,
713                 u32 module, struct clk *clk_ipu)
714 {
715         struct ipu_di *di;
716
717         if (id > 1)
718                 return -ENODEV;
719
720         di = devm_kzalloc(dev, sizeof(*di), GFP_KERNEL);
721         if (!di)
722                 return -ENOMEM;
723
724         ipu->di_priv[id] = di;
725
726         di->clk_di = devm_clk_get(dev, id ? "di1" : "di0");
727         if (IS_ERR(di->clk_di))
728                 return PTR_ERR(di->clk_di);
729
730         di->module = module;
731         di->id = id;
732         di->clk_ipu = clk_ipu;
733         di->base = devm_ioremap(dev, base, PAGE_SIZE);
734         if (!di->base)
735                 return -ENOMEM;
736
737         ipu_di_write(di, 0x10, DI_BS_CLKGEN0);
738
739         dev_dbg(dev, "DI%d base: 0x%08lx remapped to %p\n",
740                         id, base, di->base);
741         di->inuse = false;
742         di->ipu = ipu;
743
744         return 0;
745 }
746
747 void ipu_di_exit(struct ipu_soc *ipu, int id)
748 {
749 }