Merge tag 'for-5.13-rc2-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave...
[linux-2.6-microblaze.git] / drivers / gpu / drm / panel / panel-visionox-rm69299.c
1 // SPDX-License-Identifier: GPL-2.0
2 /*
3  * Copyright (c) 2019, The Linux Foundation. All rights reserved.
4  */
5
6 #include <linux/delay.h>
7 #include <linux/module.h>
8 #include <linux/of_device.h>
9 #include <linux/gpio/consumer.h>
10 #include <linux/regulator/consumer.h>
11
12 #include <video/mipi_display.h>
13
14 #include <drm/drm_mipi_dsi.h>
15 #include <drm/drm_modes.h>
16 #include <drm/drm_panel.h>
17
18 struct visionox_rm69299 {
19         struct drm_panel panel;
20         struct regulator_bulk_data supplies[2];
21         struct gpio_desc *reset_gpio;
22         struct mipi_dsi_device *dsi;
23         bool prepared;
24         bool enabled;
25 };
26
27 static inline struct visionox_rm69299 *panel_to_ctx(struct drm_panel *panel)
28 {
29         return container_of(panel, struct visionox_rm69299, panel);
30 }
31
32 static int visionox_rm69299_power_on(struct visionox_rm69299 *ctx)
33 {
34         int ret;
35
36         ret = regulator_bulk_enable(ARRAY_SIZE(ctx->supplies), ctx->supplies);
37         if (ret < 0)
38                 return ret;
39
40         /*
41          * Reset sequence of visionox panel requires the panel to be
42          * out of reset for 10ms, followed by being held in reset
43          * for 10ms and then out again
44          */
45         gpiod_set_value(ctx->reset_gpio, 1);
46         usleep_range(10000, 20000);
47         gpiod_set_value(ctx->reset_gpio, 0);
48         usleep_range(10000, 20000);
49         gpiod_set_value(ctx->reset_gpio, 1);
50         usleep_range(10000, 20000);
51
52         return 0;
53 }
54
55 static int visionox_rm69299_power_off(struct visionox_rm69299 *ctx)
56 {
57         gpiod_set_value(ctx->reset_gpio, 0);
58
59         return regulator_bulk_disable(ARRAY_SIZE(ctx->supplies), ctx->supplies);
60 }
61
62 static int visionox_rm69299_unprepare(struct drm_panel *panel)
63 {
64         struct visionox_rm69299 *ctx = panel_to_ctx(panel);
65         int ret;
66
67         ctx->dsi->mode_flags = 0;
68
69         ret = mipi_dsi_dcs_write(ctx->dsi, MIPI_DCS_SET_DISPLAY_OFF, NULL, 0);
70         if (ret < 0)
71                 dev_err(ctx->panel.dev, "set_display_off cmd failed ret = %d\n", ret);
72
73         /* 120ms delay required here as per DCS spec */
74         msleep(120);
75
76         ret = mipi_dsi_dcs_write(ctx->dsi, MIPI_DCS_ENTER_SLEEP_MODE, NULL, 0);
77         if (ret < 0) {
78                 dev_err(ctx->panel.dev, "enter_sleep cmd failed ret = %d\n", ret);
79         }
80
81         ret = visionox_rm69299_power_off(ctx);
82
83         ctx->prepared = false;
84         return ret;
85 }
86
87 static int visionox_rm69299_prepare(struct drm_panel *panel)
88 {
89         struct visionox_rm69299 *ctx = panel_to_ctx(panel);
90         int ret;
91
92         if (ctx->prepared)
93                 return 0;
94
95         ret = visionox_rm69299_power_on(ctx);
96         if (ret < 0)
97                 return ret;
98
99         ctx->dsi->mode_flags |= MIPI_DSI_MODE_LPM;
100
101         ret = mipi_dsi_dcs_write_buffer(ctx->dsi, (u8[]) { 0xfe, 0x00 }, 2);
102         if (ret < 0) {
103                 dev_err(ctx->panel.dev, "cmd set tx 0 failed, ret = %d\n", ret);
104                 goto power_off;
105         }
106
107         ret = mipi_dsi_dcs_write_buffer(ctx->dsi, (u8[]) { 0xc2, 0x08 }, 2);
108         if (ret < 0) {
109                 dev_err(ctx->panel.dev, "cmd set tx 1 failed, ret = %d\n", ret);
110                 goto power_off;
111         }
112
113         ret = mipi_dsi_dcs_write_buffer(ctx->dsi, (u8[]) { 0x35, 0x00 }, 2);
114         if (ret < 0) {
115                 dev_err(ctx->panel.dev, "cmd set tx 2 failed, ret = %d\n", ret);
116                 goto power_off;
117         }
118
119         ret = mipi_dsi_dcs_write_buffer(ctx->dsi, (u8[]) { 0x51, 0xff }, 2);
120         if (ret < 0) {
121                 dev_err(ctx->panel.dev, "cmd set tx 3 failed, ret = %d\n", ret);
122                 goto power_off;
123         }
124
125         ret = mipi_dsi_dcs_write(ctx->dsi, MIPI_DCS_EXIT_SLEEP_MODE, NULL, 0);
126         if (ret < 0) {
127                 dev_err(ctx->panel.dev, "exit_sleep_mode cmd failed ret = %d\n", ret);
128                 goto power_off;
129         }
130
131         /* Per DSI spec wait 120ms after sending exit sleep DCS command */
132         msleep(120);
133
134         ret = mipi_dsi_dcs_write(ctx->dsi, MIPI_DCS_SET_DISPLAY_ON, NULL, 0);
135         if (ret < 0) {
136                 dev_err(ctx->panel.dev, "set_display_on cmd failed ret = %d\n", ret);
137                 goto power_off;
138         }
139
140         /* Per DSI spec wait 120ms after sending set_display_on DCS command */
141         msleep(120);
142
143         ctx->prepared = true;
144
145         return 0;
146
147 power_off:
148         return ret;
149 }
150
151 static const struct drm_display_mode visionox_rm69299_1080x2248_60hz = {
152         .name = "1080x2248",
153         .clock = 158695,
154         .hdisplay = 1080,
155         .hsync_start = 1080 + 26,
156         .hsync_end = 1080 + 26 + 2,
157         .htotal = 1080 + 26 + 2 + 36,
158         .vdisplay = 2248,
159         .vsync_start = 2248 + 56,
160         .vsync_end = 2248 + 56 + 4,
161         .vtotal = 2248 + 56 + 4 + 4,
162         .flags = 0,
163 };
164
165 static int visionox_rm69299_get_modes(struct drm_panel *panel,
166                                       struct drm_connector *connector)
167 {
168         struct visionox_rm69299 *ctx = panel_to_ctx(panel);
169         struct drm_display_mode *mode;
170
171         mode = drm_mode_create(connector->dev);
172         if (!mode) {
173                 dev_err(ctx->panel.dev, "failed to create a new display mode\n");
174                 return 0;
175         }
176
177         connector->display_info.width_mm = 74;
178         connector->display_info.height_mm = 131;
179         drm_mode_copy(mode, &visionox_rm69299_1080x2248_60hz);
180         mode->type = DRM_MODE_TYPE_DRIVER | DRM_MODE_TYPE_PREFERRED;
181         drm_mode_probed_add(connector, mode);
182
183         return 1;
184 }
185
186 static const struct drm_panel_funcs visionox_rm69299_drm_funcs = {
187         .unprepare = visionox_rm69299_unprepare,
188         .prepare = visionox_rm69299_prepare,
189         .get_modes = visionox_rm69299_get_modes,
190 };
191
192 static int visionox_rm69299_probe(struct mipi_dsi_device *dsi)
193 {
194         struct device *dev = &dsi->dev;
195         struct visionox_rm69299 *ctx;
196         int ret;
197
198         ctx = devm_kzalloc(dev, sizeof(*ctx), GFP_KERNEL);
199         if (!ctx)
200                 return -ENOMEM;
201
202         mipi_dsi_set_drvdata(dsi, ctx);
203
204         ctx->panel.dev = dev;
205         ctx->dsi = dsi;
206
207         ctx->supplies[0].supply = "vdda";
208         ctx->supplies[1].supply = "vdd3p3";
209
210         ret = devm_regulator_bulk_get(ctx->panel.dev, ARRAY_SIZE(ctx->supplies),
211                                       ctx->supplies);
212         if (ret < 0)
213                 return ret;
214
215         ctx->reset_gpio = devm_gpiod_get(ctx->panel.dev,
216                                          "reset", GPIOD_OUT_LOW);
217         if (IS_ERR(ctx->reset_gpio)) {
218                 dev_err(dev, "cannot get reset gpio %ld\n", PTR_ERR(ctx->reset_gpio));
219                 return PTR_ERR(ctx->reset_gpio);
220         }
221
222         drm_panel_init(&ctx->panel, dev, &visionox_rm69299_drm_funcs,
223                        DRM_MODE_CONNECTOR_DSI);
224         ctx->panel.dev = dev;
225         ctx->panel.funcs = &visionox_rm69299_drm_funcs;
226         drm_panel_add(&ctx->panel);
227
228         dsi->lanes = 4;
229         dsi->format = MIPI_DSI_FMT_RGB888;
230         dsi->mode_flags = MIPI_DSI_MODE_VIDEO | MIPI_DSI_MODE_LPM |
231                           MIPI_DSI_CLOCK_NON_CONTINUOUS;
232         ret = mipi_dsi_attach(dsi);
233         if (ret < 0) {
234                 dev_err(dev, "dsi attach failed ret = %d\n", ret);
235                 goto err_dsi_attach;
236         }
237
238         ret = regulator_set_load(ctx->supplies[0].consumer, 32000);
239         if (ret) {
240                 dev_err(dev, "regulator set load failed for vdda supply ret = %d\n", ret);
241                 goto err_set_load;
242         }
243
244         ret = regulator_set_load(ctx->supplies[1].consumer, 13200);
245         if (ret) {
246                 dev_err(dev, "regulator set load failed for vdd3p3 supply ret = %d\n", ret);
247                 goto err_set_load;
248         }
249
250         return 0;
251
252 err_set_load:
253         mipi_dsi_detach(dsi);
254 err_dsi_attach:
255         drm_panel_remove(&ctx->panel);
256         return ret;
257 }
258
259 static int visionox_rm69299_remove(struct mipi_dsi_device *dsi)
260 {
261         struct visionox_rm69299 *ctx = mipi_dsi_get_drvdata(dsi);
262
263         mipi_dsi_detach(ctx->dsi);
264         mipi_dsi_device_unregister(ctx->dsi);
265
266         drm_panel_remove(&ctx->panel);
267         return 0;
268 }
269
270 static const struct of_device_id visionox_rm69299_of_match[] = {
271         { .compatible = "visionox,rm69299-1080p-display", },
272         { /* sentinel */ }
273 };
274 MODULE_DEVICE_TABLE(of, visionox_rm69299_of_match);
275
276 static struct mipi_dsi_driver visionox_rm69299_driver = {
277         .driver = {
278                 .name = "panel-visionox-rm69299",
279                 .of_match_table = visionox_rm69299_of_match,
280         },
281         .probe = visionox_rm69299_probe,
282         .remove = visionox_rm69299_remove,
283 };
284 module_mipi_dsi_driver(visionox_rm69299_driver);
285
286 MODULE_DESCRIPTION("Visionox RM69299 DSI Panel Driver");
287 MODULE_LICENSE("GPL v2");