drivers/gpu/drm/panel/panel-sony-acx565akm.c

   1 // SPDX-License-Identifier: GPL-2.0
   2 /*
   3  * Sony ACX565AKM LCD Panel driver
   4  *
   5  * Copyright (C) 2019 Texas Instruments Incorporated
   6  *
   7  * Based on the omapdrm-specific panel-sony-acx565akm driver
   8  *
   9  * Copyright (C) 2010 Nokia Corporation
  10  * Author: Imre Deak <imre.deak@nokia.com>
  11  */
  12
  13 /*
  14  * TODO (to be addressed with hardware access to test the changes):
  15  *
  16  * - Update backlight support to use backlight_update_status() etc.
  17  * - Use prepare/unprepare for the basic power on/off of the backligt
  18  */
  19
  20 #include <linux/backlight.h>
  21 #include <linux/delay.h>
  22 #include <linux/gpio/consumer.h>
  23 #include <linux/jiffies.h>
  24 #include <linux/module.h>
  25 #include <linux/mutex.h>
  26 #include <linux/sched.h>
  27 #include <linux/spi/spi.h>
  28 #include <video/mipi_display.h>
  29
  30 #include <drm/drm_connector.h>
  31 #include <drm/drm_modes.h>
  32 #include <drm/drm_panel.h>
  33
  34 #define CTRL_DISP_BRIGHTNESS_CTRL_ON            BIT(5)
  35 #define CTRL_DISP_AMBIENT_LIGHT_CTRL_ON         BIT(4)
  36 #define CTRL_DISP_BACKLIGHT_ON                  BIT(2)
  37 #define CTRL_DISP_AUTO_BRIGHTNESS_ON            BIT(1)
  38
  39 #define MIPID_CMD_WRITE_CABC            0x55
  40 #define MIPID_CMD_READ_CABC             0x56
  41
  42 #define MIPID_VER_LPH8923               3
  43 #define MIPID_VER_LS041Y3               4
  44 #define MIPID_VER_L4F00311              8
  45 #define MIPID_VER_ACX565AKM             9
  46
  47 struct acx565akm_panel {
  48         struct drm_panel panel;
  49
  50         struct spi_device *spi;
  51         struct gpio_desc *reset_gpio;
  52         struct backlight_device *backlight;
  53
  54         struct mutex mutex;
  55
  56         const char *name;
  57         u8 display_id[3];
  58         int model;
  59         int revision;
  60         bool has_bc;
  61         bool has_cabc;
  62
  63         bool enabled;
  64         unsigned int cabc_mode;
  65         /*
  66          * Next value of jiffies when we can issue the next sleep in/out
  67          * command.
  68          */
  69         unsigned long hw_guard_end;
  70         unsigned long hw_guard_wait;            /* max guard time in jiffies */
  71 };
  72
  73 #define to_acx565akm_device(p) container_of(p, struct acx565akm_panel, panel)
  74
  75 static void acx565akm_transfer(struct acx565akm_panel *lcd, int cmd,
  76                               const u8 *wbuf, int wlen, u8 *rbuf, int rlen)
  77 {
  78         struct spi_message      m;
  79         struct spi_transfer     *x, xfer[5];
  80         int                     ret;
  81
  82         spi_message_init(&m);
  83
  84         memset(xfer, 0, sizeof(xfer));
  85         x = &xfer[0];
  86
  87         cmd &=  0xff;
  88         x->tx_buf = &cmd;
  89         x->bits_per_word = 9;
  90         x->len = 2;
  91
  92         if (rlen > 1 && wlen == 0) {
  93                 /*
  94                  * Between the command and the response data there is a
  95                  * dummy clock cycle. Add an extra bit after the command
  96                  * word to account for this.
  97                  */
  98                 x->bits_per_word = 10;
  99                 cmd <<= 1;
 100         }
 101         spi_message_add_tail(x, &m);
 102
 103         if (wlen) {
 104                 x++;
 105                 x->tx_buf = wbuf;
 106                 x->len = wlen;
 107                 x->bits_per_word = 9;
 108                 spi_message_add_tail(x, &m);
 109         }
 110
 111         if (rlen) {
 112                 x++;
 113                 x->rx_buf       = rbuf;
 114                 x->len          = rlen;
 115                 spi_message_add_tail(x, &m);
 116         }
 117
 118         ret = spi_sync(lcd->spi, &m);
 119         if (ret < 0)
 120                 dev_dbg(&lcd->spi->dev, "spi_sync %d\n", ret);
 121 }
 122
 123 static inline void acx565akm_cmd(struct acx565akm_panel *lcd, int cmd)
 124 {
 125         acx565akm_transfer(lcd, cmd, NULL, 0, NULL, 0);
 126 }
 127
 128 static inline void acx565akm_write(struct acx565akm_panel *lcd,
 129                                int reg, const u8 *buf, int len)
 130 {
 131         acx565akm_transfer(lcd, reg, buf, len, NULL, 0);
 132 }
 133
 134 static inline void acx565akm_read(struct acx565akm_panel *lcd,
 135                               int reg, u8 *buf, int len)
 136 {
 137         acx565akm_transfer(lcd, reg, NULL, 0, buf, len);
 138 }
 139
 140 /* -----------------------------------------------------------------------------
 141  * Auto Brightness Control Via sysfs
 142  */
 143
 144 static unsigned int acx565akm_get_cabc_mode(struct acx565akm_panel *lcd)
 145 {
 146         return lcd->cabc_mode;
 147 }
 148
 149 static void acx565akm_set_cabc_mode(struct acx565akm_panel *lcd,
 150                                     unsigned int mode)
 151 {
 152         u16 cabc_ctrl;
 153
 154         lcd->cabc_mode = mode;
 155         if (!lcd->enabled)
 156                 return;
 157         cabc_ctrl = 0;
 158         acx565akm_read(lcd, MIPID_CMD_READ_CABC, (u8 *)&cabc_ctrl, 1);
 159         cabc_ctrl &= ~3;
 160         cabc_ctrl |= (1 << 8) | (mode & 3);
 161         acx565akm_write(lcd, MIPID_CMD_WRITE_CABC, (u8 *)&cabc_ctrl, 2);
 162 }
 163
 164 static unsigned int acx565akm_get_hw_cabc_mode(struct acx565akm_panel *lcd)
 165 {
 166         u8 cabc_ctrl;
 167
 168         acx565akm_read(lcd, MIPID_CMD_READ_CABC, &cabc_ctrl, 1);
 169         return cabc_ctrl & 3;
 170 }
 171
 172 static const char * const acx565akm_cabc_modes[] = {
 173         "off",          /* always used when CABC is not supported */
 174         "ui",
 175         "still-image",
 176         "moving-image",
 177 };
 178
 179 static ssize_t cabc_mode_show(struct device *dev,
 180                               struct device_attribute *attr,
 181                               char *buf)
 182 {
 183         struct acx565akm_panel *lcd = dev_get_drvdata(dev);
 184         const char *mode_str;
 185         int mode;
 186
 187         if (!lcd->has_cabc)
 188                 mode = 0;
 189         else
 190                 mode = acx565akm_get_cabc_mode(lcd);
 191
 192         mode_str = "unknown";
 193         if (mode >= 0 && mode < ARRAY_SIZE(acx565akm_cabc_modes))
 194                 mode_str = acx565akm_cabc_modes[mode];
 195
 196         return sprintf(buf, "%s\n", mode_str);
 197 }
 198
 199 static ssize_t cabc_mode_store(struct device *dev,
 200                                struct device_attribute *attr,
 201                                const char *buf, size_t count)
 202 {
 203         struct acx565akm_panel *lcd = dev_get_drvdata(dev);
 204         unsigned int i;
 205
 206         for (i = 0; i < ARRAY_SIZE(acx565akm_cabc_modes); i++) {
 207                 const char *mode_str = acx565akm_cabc_modes[i];
 208                 int cmp_len = strlen(mode_str);
 209
 210                 if (count > 0 && buf[count - 1] == '\n')
 211                         count--;
 212                 if (count != cmp_len)
 213                         continue;
 214
 215                 if (strncmp(buf, mode_str, cmp_len) == 0)
 216                         break;
 217         }
 218
 219         if (i == ARRAY_SIZE(acx565akm_cabc_modes))
 220                 return -EINVAL;
 221
 222         if (!lcd->has_cabc && i != 0)
 223                 return -EINVAL;
 224
 225         mutex_lock(&lcd->mutex);
 226         acx565akm_set_cabc_mode(lcd, i);
 227         mutex_unlock(&lcd->mutex);
 228
 229         return count;
 230 }
 231
 232 static ssize_t cabc_available_modes_show(struct device *dev,
 233                                          struct device_attribute *attr,
 234                                          char *buf)
 235 {
 236         struct acx565akm_panel *lcd = dev_get_drvdata(dev);
 237         unsigned int i;
 238         size_t len = 0;
 239
 240         if (!lcd->has_cabc)
 241                 return sprintf(buf, "%s\n", acx565akm_cabc_modes[0]);
 242
 243         for (i = 0; i < ARRAY_SIZE(acx565akm_cabc_modes); i++)
 244                 len += sprintf(&buf[len], "%s%s", i ? " " : "",
 245                                acx565akm_cabc_modes[i]);
 246
 247         buf[len++] = '\n';
 248
 249         return len;
 250 }
 251
 252 static DEVICE_ATTR_RW(cabc_mode);
 253 static DEVICE_ATTR_RO(cabc_available_modes);
 254
 255 static struct attribute *acx565akm_cabc_attrs[] = {
 256         &dev_attr_cabc_mode.attr,
 257         &dev_attr_cabc_available_modes.attr,
 258         NULL,
 259 };
 260
 261 static const struct attribute_group acx565akm_cabc_attr_group = {
 262         .attrs = acx565akm_cabc_attrs,
 263 };
 264
 265 /* -----------------------------------------------------------------------------
 266  * Backlight Device
 267  */
 268
 269 static int acx565akm_get_actual_brightness(struct acx565akm_panel *lcd)
 270 {
 271         u8 bv;
 272
 273         acx565akm_read(lcd, MIPI_DCS_GET_DISPLAY_BRIGHTNESS, &bv, 1);
 274
 275         return bv;
 276 }
 277
 278 static void acx565akm_set_brightness(struct acx565akm_panel *lcd, int level)
 279 {
 280         u16 ctrl;
 281         int bv;
 282
 283         bv = level | (1 << 8);
 284         acx565akm_write(lcd, MIPI_DCS_SET_DISPLAY_BRIGHTNESS, (u8 *)&bv, 2);
 285
 286         acx565akm_read(lcd, MIPI_DCS_GET_CONTROL_DISPLAY, (u8 *)&ctrl, 1);
 287         if (level)
 288                 ctrl |= CTRL_DISP_BRIGHTNESS_CTRL_ON |
 289                         CTRL_DISP_BACKLIGHT_ON;
 290         else
 291                 ctrl &= ~(CTRL_DISP_BRIGHTNESS_CTRL_ON |
 292                           CTRL_DISP_BACKLIGHT_ON);
 293
 294         ctrl |= 1 << 8;
 295         acx565akm_write(lcd, MIPI_DCS_WRITE_CONTROL_DISPLAY, (u8 *)&ctrl, 2);
 296 }
 297
 298 static int acx565akm_bl_update_status_locked(struct backlight_device *dev)
 299 {
 300         struct acx565akm_panel *lcd = dev_get_drvdata(&dev->dev);
 301         int level;
 302
 303         if (dev->props.fb_blank == FB_BLANK_UNBLANK &&
 304             dev->props.power == FB_BLANK_UNBLANK)
 305                 level = dev->props.brightness;
 306         else
 307                 level = 0;
 308
 309         acx565akm_set_brightness(lcd, level);
 310
 311         return 0;
 312 }
 313
 314 static int acx565akm_bl_update_status(struct backlight_device *dev)
 315 {
 316         struct acx565akm_panel *lcd = dev_get_drvdata(&dev->dev);
 317         int ret;
 318
 319         mutex_lock(&lcd->mutex);
 320         ret = acx565akm_bl_update_status_locked(dev);
 321         mutex_unlock(&lcd->mutex);
 322
 323         return ret;
 324 }
 325
 326 static int acx565akm_bl_get_intensity(struct backlight_device *dev)
 327 {
 328         struct acx565akm_panel *lcd = dev_get_drvdata(&dev->dev);
 329         unsigned int intensity;
 330
 331         mutex_lock(&lcd->mutex);
 332
 333         if (dev->props.fb_blank == FB_BLANK_UNBLANK &&
 334             dev->props.power == FB_BLANK_UNBLANK)
 335                 intensity = acx565akm_get_actual_brightness(lcd);
 336         else
 337                 intensity = 0;
 338
 339         mutex_unlock(&lcd->mutex);
 340
 341         return intensity;
 342 }
 343
 344 static const struct backlight_ops acx565akm_bl_ops = {
 345         .get_brightness = acx565akm_bl_get_intensity,
 346         .update_status  = acx565akm_bl_update_status,
 347 };
 348
 349 static int acx565akm_backlight_init(struct acx565akm_panel *lcd)
 350 {
 351         struct backlight_properties props = {
 352                 .fb_blank = FB_BLANK_UNBLANK,
 353                 .power = FB_BLANK_UNBLANK,
 354                 .type = BACKLIGHT_RAW,
 355         };
 356         int ret;
 357
 358         lcd->backlight = backlight_device_register(lcd->name, &lcd->spi->dev,
 359                                                    lcd, &acx565akm_bl_ops,
 360                                                    &props);
 361         if (IS_ERR(lcd->backlight)) {
 362                 ret = PTR_ERR(lcd->backlight);
 363                 lcd->backlight = NULL;
 364                 return ret;
 365         }
 366
 367         if (lcd->has_cabc) {
 368                 ret = sysfs_create_group(&lcd->backlight->dev.kobj,
 369                                          &acx565akm_cabc_attr_group);
 370                 if (ret < 0) {
 371                         dev_err(&lcd->spi->dev,
 372                                 "%s failed to create sysfs files\n", __func__);
 373                         backlight_device_unregister(lcd->backlight);
 374                         return ret;
 375                 }
 376
 377                 lcd->cabc_mode = acx565akm_get_hw_cabc_mode(lcd);
 378         }
 379
 380         lcd->backlight->props.max_brightness = 255;
 381         lcd->backlight->props.brightness = acx565akm_get_actual_brightness(lcd);
 382
 383         acx565akm_bl_update_status_locked(lcd->backlight);
 384
 385         return 0;
 386 }
 387
 388 static void acx565akm_backlight_cleanup(struct acx565akm_panel *lcd)
 389 {
 390         if (lcd->has_cabc)
 391                 sysfs_remove_group(&lcd->backlight->dev.kobj,
 392                                    &acx565akm_cabc_attr_group);
 393
 394         backlight_device_unregister(lcd->backlight);
 395 }
 396
 397 /* -----------------------------------------------------------------------------
 398  * DRM Bridge Operations
 399  */
 400
 401 static void acx565akm_set_sleep_mode(struct acx565akm_panel *lcd, int on)
 402 {
 403         int cmd = on ? MIPI_DCS_ENTER_SLEEP_MODE : MIPI_DCS_EXIT_SLEEP_MODE;
 404         unsigned long wait;
 405
 406         /*
 407          * We have to keep 120msec between sleep in/out commands.
 408          * (8.2.15, 8.2.16).
 409          */
 410         wait = lcd->hw_guard_end - jiffies;
 411         if ((long)wait > 0 && wait <= lcd->hw_guard_wait) {
 412                 set_current_state(TASK_UNINTERRUPTIBLE);
 413                 schedule_timeout(wait);
 414         }
 415
 416         acx565akm_cmd(lcd, cmd);
 417
 418         lcd->hw_guard_wait = msecs_to_jiffies(120);
 419         lcd->hw_guard_end = jiffies + lcd->hw_guard_wait;
 420 }
 421
 422 static void acx565akm_set_display_state(struct acx565akm_panel *lcd,
 423                                         int enabled)
 424 {
 425         int cmd = enabled ? MIPI_DCS_SET_DISPLAY_ON : MIPI_DCS_SET_DISPLAY_OFF;
 426
 427         acx565akm_cmd(lcd, cmd);
 428 }
 429
 430 static int acx565akm_power_on(struct acx565akm_panel *lcd)
 431 {
 432         /*FIXME tweak me */
 433         msleep(50);
 434
 435         gpiod_set_value(lcd->reset_gpio, 1);
 436
 437         if (lcd->enabled) {
 438                 dev_dbg(&lcd->spi->dev, "panel already enabled\n");
 439                 return 0;
 440         }
 441
 442         /*
 443          * We have to meet all the following delay requirements:
 444          * 1. tRW: reset pulse width 10usec (7.12.1)
 445          * 2. tRT: reset cancel time 5msec (7.12.1)
 446          * 3. Providing PCLK,HS,VS signals for 2 frames = ~50msec worst
 447          *    case (7.6.2)
 448          * 4. 120msec before the sleep out command (7.12.1)
 449          */
 450         msleep(120);
 451
 452         acx565akm_set_sleep_mode(lcd, 0);
 453         lcd->enabled = true;
 454
 455         /* 5msec between sleep out and the next command. (8.2.16) */
 456         usleep_range(5000, 10000);
 457         acx565akm_set_display_state(lcd, 1);
 458         acx565akm_set_cabc_mode(lcd, lcd->cabc_mode);
 459
 460         return acx565akm_bl_update_status_locked(lcd->backlight);
 461 }
 462
 463 static void acx565akm_power_off(struct acx565akm_panel *lcd)
 464 {
 465         if (!lcd->enabled)
 466                 return;
 467
 468         acx565akm_set_display_state(lcd, 0);
 469         acx565akm_set_sleep_mode(lcd, 1);
 470         lcd->enabled = false;
 471         /*
 472          * We have to provide PCLK,HS,VS signals for 2 frames (worst case
 473          * ~50msec) after sending the sleep in command and asserting the
 474          * reset signal. We probably could assert the reset w/o the delay
 475          * but we still delay to avoid possible artifacts. (7.6.1)
 476          */
 477         msleep(50);
 478
 479         gpiod_set_value(lcd->reset_gpio, 0);
 480
 481         /* FIXME need to tweak this delay */
 482         msleep(100);
 483 }
 484
 485 static int acx565akm_disable(struct drm_panel *panel)
 486 {
 487         struct acx565akm_panel *lcd = to_acx565akm_device(panel);
 488
 489         mutex_lock(&lcd->mutex);
 490         acx565akm_power_off(lcd);
 491         mutex_unlock(&lcd->mutex);
 492
 493         return 0;
 494 }
 495
 496 static int acx565akm_enable(struct drm_panel *panel)
 497 {
 498         struct acx565akm_panel *lcd = to_acx565akm_device(panel);
 499
 500         mutex_lock(&lcd->mutex);
 501         acx565akm_power_on(lcd);
 502         mutex_unlock(&lcd->mutex);
 503
 504         return 0;
 505 }
 506
 507 static const struct drm_display_mode acx565akm_mode = {
 508         .clock = 24000,
 509         .hdisplay = 800,
 510         .hsync_start = 800 + 28,
 511         .hsync_end = 800 + 28 + 4,
 512         .htotal = 800 + 28 + 4 + 24,
 513         .vdisplay = 480,
 514         .vsync_start = 480 + 3,
 515         .vsync_end = 480 + 3 + 3,
 516         .vtotal = 480 + 3 + 3 + 4,
 517         .type = DRM_MODE_TYPE_DRIVER | DRM_MODE_TYPE_PREFERRED,
 518         .flags = DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_NVSYNC,
 519         .width_mm = 77,
 520         .height_mm = 46,
 521 };
 522
 523 static int acx565akm_get_modes(struct drm_panel *panel,
 524                                struct drm_connector *connector)
 525 {
 526         struct drm_display_mode *mode;
 527
 528         mode = drm_mode_duplicate(connector->dev, &acx565akm_mode);
 529         if (!mode)
 530                 return -ENOMEM;
 531
 532         drm_mode_set_name(mode);
 533         drm_mode_probed_add(connector, mode);
 534
 535         connector->display_info.width_mm = acx565akm_mode.width_mm;
 536         connector->display_info.height_mm = acx565akm_mode.height_mm;
 537         connector->display_info.bus_flags = DRM_BUS_FLAG_DE_HIGH
 538                                           | DRM_BUS_FLAG_SYNC_SAMPLE_POSEDGE
 539                                           | DRM_BUS_FLAG_PIXDATA_SAMPLE_NEGEDGE;
 540
 541         return 1;
 542 }
 543
 544 static const struct drm_panel_funcs acx565akm_funcs = {
 545         .disable = acx565akm_disable,
 546         .enable = acx565akm_enable,
 547         .get_modes = acx565akm_get_modes,
 548 };
 549
 550 /* -----------------------------------------------------------------------------
 551  * Probe, Detect and Remove
 552  */
 553
 554 static int acx565akm_detect(struct acx565akm_panel *lcd)
 555 {
 556         __be32 value;
 557         u32 status;
 558         int ret = 0;
 559
 560         /*
 561          * After being taken out of reset the panel needs 5ms before the first
 562          * command can be sent.
 563          */
 564         gpiod_set_value(lcd->reset_gpio, 1);
 565         usleep_range(5000, 10000);
 566
 567         acx565akm_read(lcd, MIPI_DCS_GET_DISPLAY_STATUS, (u8 *)&value, 4);
 568         status = __be32_to_cpu(value);
 569         lcd->enabled = (status & (1 << 17)) && (status & (1 << 10));
 570
 571         dev_dbg(&lcd->spi->dev,
 572                 "LCD panel %s by bootloader (status 0x%04x)\n",
 573                 lcd->enabled ? "enabled" : "disabled ", status);
 574
 575         acx565akm_read(lcd, MIPI_DCS_GET_DISPLAY_ID, lcd->display_id, 3);
 576         dev_dbg(&lcd->spi->dev, "MIPI display ID: %02x%02x%02x\n",
 577                 lcd->display_id[0], lcd->display_id[1], lcd->display_id[2]);
 578
 579         switch (lcd->display_id[0]) {
 580         case 0x10:
 581                 lcd->model = MIPID_VER_ACX565AKM;
 582                 lcd->name = "acx565akm";
 583                 lcd->has_bc = 1;
 584                 lcd->has_cabc = 1;
 585                 break;
 586         case 0x29:
 587                 lcd->model = MIPID_VER_L4F00311;
 588                 lcd->name = "l4f00311";
 589                 break;
 590         case 0x45:
 591                 lcd->model = MIPID_VER_LPH8923;
 592                 lcd->name = "lph8923";
 593                 break;
 594         case 0x83:
 595                 lcd->model = MIPID_VER_LS041Y3;
 596                 lcd->name = "ls041y3";
 597                 break;
 598         default:
 599                 lcd->name = "unknown";
 600                 dev_err(&lcd->spi->dev, "unknown display ID\n");
 601                 ret = -ENODEV;
 602                 goto done;
 603         }
 604
 605         lcd->revision = lcd->display_id[1];
 606
 607         dev_info(&lcd->spi->dev, "%s rev %02x panel detected\n",
 608                  lcd->name, lcd->revision);
 609
 610 done:
 611         if (!lcd->enabled)
 612                 gpiod_set_value(lcd->reset_gpio, 0);
 613
 614         return ret;
 615 }
 616
 617 static int acx565akm_probe(struct spi_device *spi)
 618 {
 619         struct acx565akm_panel *lcd;
 620         int ret;
 621
 622         lcd = devm_kzalloc(&spi->dev, sizeof(*lcd), GFP_KERNEL);
 623         if (!lcd)
 624                 return -ENOMEM;
 625
 626         spi_set_drvdata(spi, lcd);
 627         spi->mode = SPI_MODE_3;
 628
 629         lcd->spi = spi;
 630         mutex_init(&lcd->mutex);
 631
 632         lcd->reset_gpio = devm_gpiod_get(&spi->dev, "reset", GPIOD_OUT_HIGH);
 633         if (IS_ERR(lcd->reset_gpio)) {
 634                 dev_err(&spi->dev, "failed to get reset GPIO\n");
 635                 return PTR_ERR(lcd->reset_gpio);
 636         }
 637
 638         ret = acx565akm_detect(lcd);
 639         if (ret < 0) {
 640                 dev_err(&spi->dev, "panel detection failed\n");
 641                 return ret;
 642         }
 643
 644         if (lcd->has_bc) {
 645                 ret = acx565akm_backlight_init(lcd);
 646                 if (ret < 0)
 647                         return ret;
 648         }
 649
 650         drm_panel_init(&lcd->panel, &lcd->spi->dev, &acx565akm_funcs,
 651                        DRM_MODE_CONNECTOR_DPI);
 652
 653         drm_panel_add(&lcd->panel);
 654
 655         return 0;
 656 }
 657
 658 static int acx565akm_remove(struct spi_device *spi)
 659 {
 660         struct acx565akm_panel *lcd = spi_get_drvdata(spi);
 661
 662         drm_panel_remove(&lcd->panel);
 663
 664         if (lcd->has_bc)
 665                 acx565akm_backlight_cleanup(lcd);
 666
 667         drm_panel_disable(&lcd->panel);
 668         drm_panel_unprepare(&lcd->panel);
 669
 670         return 0;
 671 }
 672
 673 static const struct of_device_id acx565akm_of_match[] = {
 674         { .compatible = "sony,acx565akm", },
 675         { /* sentinel */ },
 676 };
 677
 678 MODULE_DEVICE_TABLE(of, acx565akm_of_match);
 679
 680 static const struct spi_device_id acx565akm_ids[] = {
 681         { "acx565akm", 0 },
 682         { /* sentinel */ }
 683 };
 684
 685 MODULE_DEVICE_TABLE(spi, acx565akm_ids);
 686
 687 static struct spi_driver acx565akm_driver = {
 688         .probe          = acx565akm_probe,
 689         .remove         = acx565akm_remove,
 690         .id_table       = acx565akm_ids,
 691         .driver         = {
 692                 .name   = "panel-sony-acx565akm",
 693                 .of_match_table = acx565akm_of_match,
 694         },
 695 };
 696
 697 module_spi_driver(acx565akm_driver);
 698
 699 MODULE_AUTHOR("Nokia Corporation");
 700 MODULE_DESCRIPTION("Sony ACX565AKM LCD Panel Driver");
 701 MODULE_LICENSE("GPL");