drivers/gpu/drm/panel/panel-olimex-lcd-olinuxino.c

   1 // SPDX-License-Identifier: GPL-2.0+
   2 /*
   3  * LCD-OLinuXino support for panel driver
   4  *
   5  * Copyright (C) 2018 Olimex Ltd.
   6  *   Author: Stefan Mavrodiev <stefan@olimex.com>
   7  */
   8
   9 #include <linux/crc32.h>
  10 #include <linux/gpio/consumer.h>
  11 #include <linux/i2c.h>
  12 #include <linux/module.h>
  13 #include <linux/mutex.h>
  14 #include <linux/of.h>
  15 #include <linux/regulator/consumer.h>
  16
  17 #include <video/videomode.h>
  18 #include <video/display_timing.h>
  19
  20 #include <drm/drm_device.h>
  21 #include <drm/drm_modes.h>
  22 #include <drm/drm_panel.h>
  23
  24 #define LCD_OLINUXINO_HEADER_MAGIC      0x4F4CB727
  25 #define LCD_OLINUXINO_DATA_LEN          256
  26
  27 struct lcd_olinuxino_mode {
  28         u32 pixelclock;
  29         u32 hactive;
  30         u32 hfp;
  31         u32 hbp;
  32         u32 hpw;
  33         u32 vactive;
  34         u32 vfp;
  35         u32 vbp;
  36         u32 vpw;
  37         u32 refresh;
  38         u32 flags;
  39 };
  40
  41 struct lcd_olinuxino_info {
  42         char name[32];
  43         u32 width_mm;
  44         u32 height_mm;
  45         u32 bpc;
  46         u32 bus_format;
  47         u32 bus_flag;
  48 } __attribute__((__packed__));
  49
  50 struct lcd_olinuxino_eeprom {
  51         u32 header;
  52         u32 id;
  53         char revision[4];
  54         u32 serial;
  55         struct lcd_olinuxino_info info;
  56         u32 num_modes;
  57         u8 reserved[180];
  58         u32 checksum;
  59 } __attribute__((__packed__));
  60
  61 struct lcd_olinuxino {
  62         struct drm_panel panel;
  63         struct device *dev;
  64         struct i2c_client *client;
  65         struct mutex mutex;
  66
  67         bool prepared;
  68         bool enabled;
  69
  70         struct regulator *supply;
  71         struct gpio_desc *enable_gpio;
  72
  73         struct lcd_olinuxino_eeprom eeprom;
  74 };
  75
  76 static inline struct lcd_olinuxino *to_lcd_olinuxino(struct drm_panel *panel)
  77 {
  78         return container_of(panel, struct lcd_olinuxino, panel);
  79 }
  80
  81 static int lcd_olinuxino_disable(struct drm_panel *panel)
  82 {
  83         struct lcd_olinuxino *lcd = to_lcd_olinuxino(panel);
  84
  85         if (!lcd->enabled)
  86                 return 0;
  87
  88         lcd->enabled = false;
  89
  90         return 0;
  91 }
  92
  93 static int lcd_olinuxino_unprepare(struct drm_panel *panel)
  94 {
  95         struct lcd_olinuxino *lcd = to_lcd_olinuxino(panel);
  96
  97         if (!lcd->prepared)
  98                 return 0;
  99
 100         gpiod_set_value_cansleep(lcd->enable_gpio, 0);
 101         regulator_disable(lcd->supply);
 102
 103         lcd->prepared = false;
 104
 105         return 0;
 106 }
 107
 108 static int lcd_olinuxino_prepare(struct drm_panel *panel)
 109 {
 110         struct lcd_olinuxino *lcd = to_lcd_olinuxino(panel);
 111         int ret;
 112
 113         if (lcd->prepared)
 114                 return 0;
 115
 116         ret = regulator_enable(lcd->supply);
 117         if (ret < 0)
 118                 return ret;
 119
 120         gpiod_set_value_cansleep(lcd->enable_gpio, 1);
 121         lcd->prepared = true;
 122
 123         return 0;
 124 }
 125
 126 static int lcd_olinuxino_enable(struct drm_panel *panel)
 127 {
 128         struct lcd_olinuxino *lcd = to_lcd_olinuxino(panel);
 129
 130         if (lcd->enabled)
 131                 return 0;
 132
 133         lcd->enabled = true;
 134
 135         return 0;
 136 }
 137
 138 static int lcd_olinuxino_get_modes(struct drm_panel *panel,
 139                                    struct drm_connector *connector)
 140 {
 141         struct lcd_olinuxino *lcd = to_lcd_olinuxino(panel);
 142         struct lcd_olinuxino_info *lcd_info = &lcd->eeprom.info;
 143         struct lcd_olinuxino_mode *lcd_mode;
 144         struct drm_display_mode *mode;
 145         u32 i, num = 0;
 146
 147         for (i = 0; i < lcd->eeprom.num_modes; i++) {
 148                 lcd_mode = (struct lcd_olinuxino_mode *)
 149                            &lcd->eeprom.reserved[i * sizeof(*lcd_mode)];
 150
 151                 mode = drm_mode_create(connector->dev);
 152                 if (!mode) {
 153                         dev_err(panel->dev, "failed to add mode %ux%u@%u\n",
 154                                 lcd_mode->hactive,
 155                                 lcd_mode->vactive,
 156                                 lcd_mode->refresh);
 157                         continue;
 158                 }
 159
 160                 mode->clock = lcd_mode->pixelclock;
 161                 mode->hdisplay = lcd_mode->hactive;
 162                 mode->hsync_start = lcd_mode->hactive + lcd_mode->hfp;
 163                 mode->hsync_end = lcd_mode->hactive + lcd_mode->hfp +
 164                                   lcd_mode->hpw;
 165                 mode->htotal = lcd_mode->hactive + lcd_mode->hfp +
 166                                lcd_mode->hpw + lcd_mode->hbp;
 167                 mode->vdisplay = lcd_mode->vactive;
 168                 mode->vsync_start = lcd_mode->vactive + lcd_mode->vfp;
 169                 mode->vsync_end = lcd_mode->vactive + lcd_mode->vfp +
 170                                   lcd_mode->vpw;
 171                 mode->vtotal = lcd_mode->vactive + lcd_mode->vfp +
 172                                lcd_mode->vpw + lcd_mode->vbp;
 173
 174                 /* Always make the first mode preferred */
 175                 if (i == 0)
 176                         mode->type |= DRM_MODE_TYPE_PREFERRED;
 177                 mode->type |= DRM_MODE_TYPE_DRIVER;
 178
 179                 drm_mode_set_name(mode);
 180                 drm_mode_probed_add(connector, mode);
 181
 182                 num++;
 183         }
 184
 185         connector->display_info.width_mm = lcd_info->width_mm;
 186         connector->display_info.height_mm = lcd_info->height_mm;
 187         connector->display_info.bpc = lcd_info->bpc;
 188
 189         if (lcd_info->bus_format)
 190                 drm_display_info_set_bus_formats(&connector->display_info,
 191                                                  &lcd_info->bus_format, 1);
 192         connector->display_info.bus_flags = lcd_info->bus_flag;
 193
 194         return num;
 195 }
 196
 197 static const struct drm_panel_funcs lcd_olinuxino_funcs = {
 198         .disable = lcd_olinuxino_disable,
 199         .unprepare = lcd_olinuxino_unprepare,
 200         .prepare = lcd_olinuxino_prepare,
 201         .enable = lcd_olinuxino_enable,
 202         .get_modes = lcd_olinuxino_get_modes,
 203 };
 204
 205 static int lcd_olinuxino_probe(struct i2c_client *client,
 206                                const struct i2c_device_id *id)
 207 {
 208         struct device *dev = &client->dev;
 209         struct lcd_olinuxino *lcd;
 210         u32 checksum, i;
 211         int ret = 0;
 212
 213         if (!i2c_check_functionality(client->adapter, I2C_FUNC_I2C |
 214                                      I2C_FUNC_SMBUS_READ_I2C_BLOCK))
 215                 return -ENODEV;
 216
 217         lcd = devm_kzalloc(dev, sizeof(*lcd), GFP_KERNEL);
 218         if (!lcd)
 219                 return -ENOMEM;
 220
 221         i2c_set_clientdata(client, lcd);
 222         lcd->dev = dev;
 223         lcd->client = client;
 224
 225         mutex_init(&lcd->mutex);
 226
 227         /* Copy data into buffer */
 228         for (i = 0; i < LCD_OLINUXINO_DATA_LEN; i += I2C_SMBUS_BLOCK_MAX) {
 229                 mutex_lock(&lcd->mutex);
 230                 ret = i2c_smbus_read_i2c_block_data(client,
 231                                                     i,
 232                                                     I2C_SMBUS_BLOCK_MAX,
 233                                                     (u8 *)&lcd->eeprom + i);
 234                 mutex_unlock(&lcd->mutex);
 235                 if (ret < 0) {
 236                         dev_err(dev, "error reading from device at %02x\n", i);
 237                         return ret;
 238                 }
 239         }
 240
 241         /* Check configuration checksum */
 242         checksum = ~crc32(~0, (u8 *)&lcd->eeprom, 252);
 243         if (checksum != lcd->eeprom.checksum) {
 244                 dev_err(dev, "configuration checksum does not match!\n");
 245                 return -EINVAL;
 246         }
 247
 248         /* Check magic header */
 249         if (lcd->eeprom.header != LCD_OLINUXINO_HEADER_MAGIC) {
 250                 dev_err(dev, "magic header does not match\n");
 251                 return -EINVAL;
 252         }
 253
 254         dev_info(dev, "Detected %s, Rev. %s, Serial: %08x\n",
 255                  lcd->eeprom.info.name,
 256                  lcd->eeprom.revision,
 257                  lcd->eeprom.serial);
 258
 259         /*
 260          * The eeprom can hold up to 4 modes.
 261          * If the stored value is bigger, overwrite it.
 262          */
 263         if (lcd->eeprom.num_modes > 4) {
 264                 dev_warn(dev, "invalid number of modes, falling back to 4\n");
 265                 lcd->eeprom.num_modes = 4;
 266         }
 267
 268         lcd->enabled = false;
 269         lcd->prepared = false;
 270
 271         lcd->supply = devm_regulator_get(dev, "power");
 272         if (IS_ERR(lcd->supply))
 273                 return PTR_ERR(lcd->supply);
 274
 275         lcd->enable_gpio = devm_gpiod_get(dev, "enable", GPIOD_OUT_LOW);
 276         if (IS_ERR(lcd->enable_gpio))
 277                 return PTR_ERR(lcd->enable_gpio);
 278
 279         drm_panel_init(&lcd->panel, dev, &lcd_olinuxino_funcs,
 280                        DRM_MODE_CONNECTOR_DPI);
 281
 282         ret = drm_panel_of_backlight(&lcd->panel);
 283         if (ret)
 284                 return ret;
 285
 286         drm_panel_add(&lcd->panel);
 287
 288         return 0;
 289 }
 290
 291 static int lcd_olinuxino_remove(struct i2c_client *client)
 292 {
 293         struct lcd_olinuxino *panel = i2c_get_clientdata(client);
 294
 295         drm_panel_remove(&panel->panel);
 296
 297         drm_panel_disable(&panel->panel);
 298         drm_panel_unprepare(&panel->panel);
 299
 300         return 0;
 301 }
 302
 303 static const struct of_device_id lcd_olinuxino_of_ids[] = {
 304         { .compatible = "olimex,lcd-olinuxino" },
 305         { }
 306 };
 307 MODULE_DEVICE_TABLE(of, lcd_olinuxino_of_ids);
 308
 309 static struct i2c_driver lcd_olinuxino_driver = {
 310         .driver = {
 311                 .name = "lcd_olinuxino",
 312                 .of_match_table = lcd_olinuxino_of_ids,
 313         },
 314         .probe = lcd_olinuxino_probe,
 315         .remove = lcd_olinuxino_remove,
 316 };
 317
 318 module_i2c_driver(lcd_olinuxino_driver);
 319
 320 MODULE_AUTHOR("Stefan Mavrodiev <stefan@olimex.com>");
 321 MODULE_DESCRIPTION("LCD-OLinuXino driver");
 322 MODULE_LICENSE("GPL");