1 # SPDX-License-Identifier: GPL-2.0-only
6 Panel registration and lookup framework.
9 depends on DRM && DRM_PANEL
11 config DRM_PANEL_ABT_Y030XX067A
12 tristate "ABT Y030XX067A 320x480 LCD panel"
16 Say Y here to enable support for the Asia Better Technology Ltd.
17 Y030XX067A 320x480 3.0" panel as found in the YLM RG-280M, RG-300
18 and RG-99 handheld gaming consoles.
20 config DRM_PANEL_ARM_VERSATILE
21 tristate "ARM Versatile panel driver"
24 select VIDEOMODE_HELPERS
26 This driver supports the ARM Versatile panels connected to ARM
27 reference designs. The panel is detected using special registers
28 in the Versatile family syscon registers.
30 config DRM_PANEL_ASUS_Z00T_TM5P5_NT35596
31 tristate "ASUS Z00T TM5P5 NT35596 panel"
32 depends on GPIOLIB && OF
33 depends on DRM_MIPI_DSI
34 depends on BACKLIGHT_CLASS_DEVICE
36 Say Y here if you want to enable support for the ASUS TMP5P5
37 NT35596 1080x1920 video mode panel as found in some Asus
38 Zenfone 2 Laser Z00T devices.
40 config DRM_PANEL_BOE_HIMAX8279D
41 tristate "Boe Himax8279d panel"
43 depends on DRM_MIPI_DSI
44 depends on BACKLIGHT_CLASS_DEVICE
46 Say Y here if you want to enable support for Boe Himax8279d
47 TFT-LCD modules. The panel has a 1200x1920 resolution and uses
48 24 bit RGB per pixel. It provides a MIPI DSI interface to
49 the host and has a built-in LED backlight.
51 config DRM_PANEL_BOE_TV101WUM_NL6
52 tristate "BOE TV101WUM and AUO KD101N80 45NA 1200x1920 panel"
54 depends on DRM_MIPI_DSI
55 depends on BACKLIGHT_CLASS_DEVICE
57 Say Y here if you want to support for BOE TV101WUM and AUO KD101N80
58 45NA WUXGA PANEL DSI Video Mode panel
60 config DRM_PANEL_DSI_CM
61 tristate "Generic DSI command mode panels"
63 depends on DRM_MIPI_DSI
64 depends on BACKLIGHT_CLASS_DEVICE
66 DRM panel driver for DSI command mode panels with support for
67 embedded and external backlights.
70 tristate "Generic LVDS panel driver"
72 depends on BACKLIGHT_CLASS_DEVICE
73 select VIDEOMODE_HELPERS
75 This driver supports LVDS panels that don't require device-specific
76 handling of power supplies or control signals. It implements automatic
77 backlight handling if the panel is attached to a backlight controller.
79 config DRM_PANEL_SIMPLE
80 tristate "support for simple panels"
82 depends on BACKLIGHT_CLASS_DEVICE
83 select VIDEOMODE_HELPERS
85 DRM panel driver for dumb panels that need at most a regulator and
86 a GPIO to be powered up. Optionally a backlight can be attached so
87 that it can be automatically turned off when the panel goes into a
90 config DRM_PANEL_ELIDA_KD35T133
91 tristate "Elida KD35T133 panel driver"
93 depends on DRM_MIPI_DSI
94 depends on BACKLIGHT_CLASS_DEVICE
96 Say Y here if you want to enable support for the Elida
97 KD35T133 controller for 320x480 LCD panels with MIPI-DSI
100 config DRM_PANEL_FEIXIN_K101_IM2BA02
101 tristate "Feixin K101 IM2BA02 panel"
103 depends on DRM_MIPI_DSI
104 depends on BACKLIGHT_CLASS_DEVICE
106 Say Y here if you want to enable support for the Feixin K101 IM2BA02
107 4-lane 800x1280 MIPI DSI panel.
109 config DRM_PANEL_FEIYANG_FY07024DI26A30D
110 tristate "Feiyang FY07024DI26A30-D MIPI-DSI LCD panel"
112 depends on DRM_MIPI_DSI
113 depends on BACKLIGHT_CLASS_DEVICE
115 Say Y if you want to enable support for panels based on the
116 Feiyang FY07024DI26A30-D MIPI-DSI interface.
118 config DRM_PANEL_ILITEK_IL9322
119 tristate "Ilitek ILI9322 320x240 QVGA panels"
123 Say Y here if you want to enable support for Ilitek IL9322
124 QVGA (320x240) RGB, YUV and ITU-T BT.656 panels.
126 config DRM_PANEL_ILITEK_ILI9881C
127 tristate "Ilitek ILI9881C-based panels"
129 depends on DRM_MIPI_DSI
130 depends on BACKLIGHT_CLASS_DEVICE
132 Say Y if you want to enable support for panels based on the
133 Ilitek ILI9881c controller.
135 config DRM_PANEL_INNOLUX_P079ZCA
136 tristate "Innolux P079ZCA panel"
138 depends on DRM_MIPI_DSI
139 depends on BACKLIGHT_CLASS_DEVICE
141 Say Y here if you want to enable support for Innolux P079ZCA
142 TFT-LCD modules. The panel has a 1024x768 resolution and uses
143 24 bit RGB per pixel. It provides a MIPI DSI interface to
144 the host and has a built-in LED backlight.
146 config DRM_PANEL_JDI_LT070ME05000
147 tristate "JDI LT070ME05000 WUXGA DSI panel"
149 depends on DRM_MIPI_DSI
150 depends on BACKLIGHT_CLASS_DEVICE
152 Say Y here if you want to enable support for JDI DSI video mode
153 panel as found in Google Nexus 7 (2013) devices.
154 The panel has a 1200(RGB)×1920 (WUXGA) resolution and uses
157 config DRM_PANEL_KHADAS_TS050
158 tristate "Khadas TS050 panel"
160 depends on DRM_MIPI_DSI
161 depends on BACKLIGHT_CLASS_DEVICE
163 Say Y here if you want to enable support for Khadas TS050 TFT-LCD
164 panel module. The panel has a 1080x1920 resolution and uses
165 24 bit RGB per pixel. It provides a MIPI DSI interface to
166 the host, a built-in LED backlight and touch controller.
168 config DRM_PANEL_KINGDISPLAY_KD097D04
169 tristate "Kingdisplay kd097d04 panel"
171 depends on DRM_MIPI_DSI
172 depends on BACKLIGHT_CLASS_DEVICE
174 Say Y here if you want to enable support for Kingdisplay kd097d04
175 TFT-LCD modules. The panel has a 1536x2048 resolution and uses
176 24 bit RGB per pixel. It provides a MIPI DSI interface to
177 the host and has a built-in LED backlight.
179 config DRM_PANEL_LEADTEK_LTK050H3146W
180 tristate "Leadtek LTK050H3146W panel"
182 depends on DRM_MIPI_DSI
183 depends on BACKLIGHT_CLASS_DEVICE
185 Say Y here if you want to enable support for Leadtek LTK050H3146W
186 TFT-LCD modules. The panel has a 720x1280 resolution and uses
187 24 bit RGB per pixel. It provides a MIPI DSI interface to
188 the host and has a built-in LED backlight.
190 config DRM_PANEL_LEADTEK_LTK500HD1829
191 tristate "Leadtek LTK500HD1829 panel"
193 depends on DRM_MIPI_DSI
194 depends on BACKLIGHT_CLASS_DEVICE
196 Say Y here if you want to enable support for Kingdisplay kd097d04
197 TFT-LCD modules. The panel has a 1536x2048 resolution and uses
198 24 bit RGB per pixel. It provides a MIPI DSI interface to
199 the host and has a built-in LED backlight.
201 config DRM_PANEL_SAMSUNG_LD9040
202 tristate "Samsung LD9040 RGB/SPI panel"
204 select VIDEOMODE_HELPERS
206 config DRM_PANEL_LG_LB035Q02
207 tristate "LG LB035Q024573 RGB panel"
208 depends on GPIOLIB && OF && SPI
210 Say Y here if you want to enable support for the LB035Q02 RGB panel
211 (found on the Gumstix Overo Palo35 board). To compile this driver as
212 a module, choose M here.
214 config DRM_PANEL_LG_LG4573
215 tristate "LG4573 RGB/SPI panel"
217 select VIDEOMODE_HELPERS
219 Say Y here if you want to enable support for LG4573 RGB panel.
220 To compile this driver as a module, choose M here.
222 config DRM_PANEL_NEC_NL8048HL11
223 tristate "NEC NL8048HL11 RGB panel"
224 depends on GPIOLIB && OF && SPI
226 Say Y here if you want to enable support for the NEC NL8048HL11 RGB
227 panel (found on the Zoom2/3/3630 SDP boards). To compile this driver
228 as a module, choose M here.
230 config DRM_PANEL_NOVATEK_NT35510
231 tristate "Novatek NT35510 RGB panel driver"
233 depends on DRM_MIPI_DSI
234 depends on BACKLIGHT_CLASS_DEVICE
236 Say Y here if you want to enable support for the panels built
237 around the Novatek NT35510 display controller, such as some
240 config DRM_PANEL_NOVATEK_NT36672A
241 tristate "Novatek NT36672A DSI panel"
243 depends on DRM_MIPI_DSI
244 depends on BACKLIGHT_CLASS_DEVICE
246 Say Y here if you want to enable support for the panels built
247 around the Novatek NT36672A display controller, such as some
248 Tianma panels used in a few Xiaomi Poco F1 mobile phones.
250 config DRM_PANEL_NOVATEK_NT39016
251 tristate "Novatek NT39016 RGB/SPI panel"
253 depends on BACKLIGHT_CLASS_DEVICE
256 Say Y here if you want to enable support for the panels built
257 around the Novatek NT39016 display controller.
259 config DRM_PANEL_MANTIX_MLAF057WE51
260 tristate "Mantix MLAF057WE51-X MIPI-DSI LCD panel"
262 depends on DRM_MIPI_DSI
263 depends on BACKLIGHT_CLASS_DEVICE
265 Say Y here if you want to enable support for the Mantix
266 MLAF057WE51-X MIPI DSI panel as e.g. used in the Librem 5. It
267 has a resolution of 720x1440 pixels, a built in backlight and touch
270 config DRM_PANEL_OLIMEX_LCD_OLINUXINO
271 tristate "Olimex LCD-OLinuXino panel"
274 depends on BACKLIGHT_CLASS_DEVICE
276 The panel is used with different sizes LCDs, from 480x272 to
277 1280x800, and 24 bit per pixel.
279 Say Y here if you want to enable support for Olimex Ltd.
282 config DRM_PANEL_ORISETECH_OTM8009A
283 tristate "Orise Technology otm8009a 480x800 dsi 2dl panel"
285 depends on DRM_MIPI_DSI
286 depends on BACKLIGHT_CLASS_DEVICE
288 Say Y here if you want to enable support for Orise Technology
289 otm8009a 480x800 dsi 2dl panel.
291 config DRM_PANEL_OSD_OSD101T2587_53TS
292 tristate "OSD OSD101T2587-53TS DSI 1920x1200 video mode panel"
294 depends on DRM_MIPI_DSI
295 depends on BACKLIGHT_CLASS_DEVICE
297 Say Y here if you want to enable support for One Stop Displays
298 OSD101T2587-53TS 10.1" 1920x1200 dsi panel.
300 config DRM_PANEL_PANASONIC_VVX10F034N00
301 tristate "Panasonic VVX10F034N00 1920x1200 video mode panel"
303 depends on DRM_MIPI_DSI
304 depends on BACKLIGHT_CLASS_DEVICE
306 Say Y here if you want to enable support for Panasonic VVX10F034N00
307 WUXGA (1920x1200) Novatek NT1397-based DSI panel as found in some
310 config DRM_PANEL_RASPBERRYPI_TOUCHSCREEN
311 tristate "Raspberry Pi 7-inch touchscreen panel"
312 depends on DRM_MIPI_DSI
314 Say Y here if you want to enable support for the Raspberry
315 Pi 7" Touchscreen. To compile this driver as a module,
318 config DRM_PANEL_RAYDIUM_RM67191
319 tristate "Raydium RM67191 FHD 1080x1920 DSI video mode panel"
321 depends on DRM_MIPI_DSI
322 depends on BACKLIGHT_CLASS_DEVICE
324 Say Y here if you want to enable support for Raydium RM67191 FHD
325 (1080x1920) DSI panel.
327 config DRM_PANEL_RAYDIUM_RM68200
328 tristate "Raydium RM68200 720x1280 DSI video mode panel"
330 depends on DRM_MIPI_DSI
331 depends on BACKLIGHT_CLASS_DEVICE
333 Say Y here if you want to enable support for Raydium RM68200
334 720x1280 DSI video mode panel.
336 config DRM_PANEL_RONBO_RB070D30
337 tristate "Ronbo Electronics RB070D30 panel"
339 depends on DRM_MIPI_DSI
340 depends on BACKLIGHT_CLASS_DEVICE
342 Say Y here if you want to enable support for Ronbo Electronics
343 RB070D30 1024x600 DSI panel.
345 config DRM_PANEL_SAMSUNG_S6D16D0
346 tristate "Samsung S6D16D0 DSI video mode panel"
348 depends on DRM_MIPI_DSI
349 select VIDEOMODE_HELPERS
351 config DRM_PANEL_SAMSUNG_S6E3HA2
352 tristate "Samsung S6E3HA2 DSI video mode panel"
354 depends on DRM_MIPI_DSI
355 depends on BACKLIGHT_CLASS_DEVICE
356 select VIDEOMODE_HELPERS
358 config DRM_PANEL_SAMSUNG_S6E63J0X03
359 tristate "Samsung S6E63J0X03 DSI command mode panel"
361 depends on DRM_MIPI_DSI
362 depends on BACKLIGHT_CLASS_DEVICE
363 select VIDEOMODE_HELPERS
365 config DRM_PANEL_SAMSUNG_S6E63M0
366 tristate "Samsung S6E63M0 RGB panel"
368 depends on BACKLIGHT_CLASS_DEVICE
370 Say Y here if you want to enable support for Samsung S6E63M0
371 AMOLED LCD panel. This panel can be accessed using SPI or
374 config DRM_PANEL_SAMSUNG_S6E63M0_SPI
375 tristate "Samsung S6E63M0 RGB SPI interface"
377 depends on DRM_PANEL_SAMSUNG_S6E63M0
378 default DRM_PANEL_SAMSUNG_S6E63M0
380 Say Y here if you want to be able to access the Samsung
381 S6E63M0 panel using SPI.
383 config DRM_PANEL_SAMSUNG_S6E63M0_DSI
384 tristate "Samsung S6E63M0 RGB DSI interface"
385 depends on DRM_MIPI_DSI
386 depends on DRM_PANEL_SAMSUNG_S6E63M0
388 Say Y here if you want to be able to access the Samsung
389 S6E63M0 panel using DSI.
391 config DRM_PANEL_SAMSUNG_S6E88A0_AMS452EF01
392 tristate "Samsung AMS452EF01 panel with S6E88A0 DSI video mode controller"
395 select VIDEOMODE_HELPERS
397 config DRM_PANEL_SAMSUNG_S6E8AA0
398 tristate "Samsung S6E8AA0 DSI video mode panel"
401 select VIDEOMODE_HELPERS
403 config DRM_PANEL_SAMSUNG_SOFEF00
404 tristate "Samsung sofef00/s6e3fc2x01 OnePlus 6/6T DSI cmd mode panels"
406 depends on DRM_MIPI_DSI
407 depends on BACKLIGHT_CLASS_DEVICE
408 select VIDEOMODE_HELPERS
410 Say Y or M here if you want to enable support for the Samsung AMOLED
411 command mode panels found in the OnePlus 6/6T smartphones.
413 The panels are 2280x1080@60Hz and 2340x1080@60Hz respectively
415 config DRM_PANEL_SEIKO_43WVF1G
416 tristate "Seiko 43WVF1G panel"
418 depends on BACKLIGHT_CLASS_DEVICE
419 select VIDEOMODE_HELPERS
421 Say Y here if you want to enable support for the Seiko
422 43WVF1G controller for 800x480 LCD panels
424 config DRM_PANEL_SHARP_LQ101R1SX01
425 tristate "Sharp LQ101R1SX01 panel"
427 depends on DRM_MIPI_DSI
428 depends on BACKLIGHT_CLASS_DEVICE
430 Say Y here if you want to enable support for Sharp LQ101R1SX01
431 TFT-LCD modules. The panel has a 2560x1600 resolution and uses
432 24 bit RGB per pixel. It provides a dual MIPI DSI interface to
433 the host and has a built-in LED backlight.
435 To compile this driver as a module, choose M here: the module
436 will be called panel-sharp-lq101r1sx01.
438 config DRM_PANEL_SHARP_LS037V7DW01
439 tristate "Sharp LS037V7DW01 VGA LCD panel"
440 depends on GPIOLIB && OF && REGULATOR
442 Say Y here if you want to enable support for Sharp LS037V7DW01 VGA
443 (480x640) LCD panel (found on the TI SDP3430 board).
445 config DRM_PANEL_SHARP_LS043T1LE01
446 tristate "Sharp LS043T1LE01 qHD video mode panel"
448 depends on DRM_MIPI_DSI
449 depends on BACKLIGHT_CLASS_DEVICE
451 Say Y here if you want to enable support for Sharp LS043T1LE01 qHD
452 (540x960) DSI panel as found on the Qualcomm APQ8074 Dragonboard
454 config DRM_PANEL_SITRONIX_ST7701
455 tristate "Sitronix ST7701 panel driver"
457 depends on DRM_MIPI_DSI
458 depends on BACKLIGHT_CLASS_DEVICE
460 Say Y here if you want to enable support for the Sitronix
461 ST7701 controller for 480X864 LCD panels with MIPI/RGB/SPI
464 config DRM_PANEL_SITRONIX_ST7703
465 tristate "Sitronix ST7703 based MIPI touchscreen panels"
467 depends on DRM_MIPI_DSI
468 depends on BACKLIGHT_CLASS_DEVICE
470 Say Y here if you want to enable support for Sitronix ST7703 based
471 panels, souch as Rocktech JH057N00900 MIPI DSI panel as e.g. used in
472 the Librem 5 devkit. It has a resolution of 720x1440 pixels, a built
473 in backlight and touch controller.
474 Touch input support is provided by the goodix driver and needs to be
477 config DRM_PANEL_SITRONIX_ST7789V
478 tristate "Sitronix ST7789V panel"
480 depends on BACKLIGHT_CLASS_DEVICE
482 Say Y here if you want to enable support for the Sitronix
483 ST7789V controller for 240x320 LCD panels
485 config DRM_PANEL_SONY_ACX424AKP
486 tristate "Sony ACX424AKP DSI command mode panel"
488 depends on DRM_MIPI_DSI
489 depends on BACKLIGHT_CLASS_DEVICE
490 select VIDEOMODE_HELPERS
492 Say Y here if you want to enable the Sony ACX424 display
493 panel. This panel supports DSI in both command and video
496 config DRM_PANEL_SONY_ACX565AKM
497 tristate "Sony ACX565AKM panel"
498 depends on GPIOLIB && OF && SPI
499 depends on BACKLIGHT_CLASS_DEVICE
501 Say Y here if you want to enable support for the Sony ACX565AKM
502 800x600 3.5" panel (found on the Nokia N900).
504 config DRM_PANEL_TDO_TL070WSH30
505 tristate "TDO TL070WSH30 DSI panel"
507 depends on DRM_MIPI_DSI
508 depends on BACKLIGHT_CLASS_DEVICE
510 Say Y here if you want to enable support for TDO TL070WSH30 TFT-LCD
511 panel module. The panel has a 1024×600 resolution and uses
512 24 bit RGB per pixel. It provides a MIPI DSI interface to
513 the host, a built-in LED backlight and touch controller.
515 config DRM_PANEL_TPO_TD028TTEC1
516 tristate "Toppoly (TPO) TD028TTEC1 panel driver"
518 depends on BACKLIGHT_CLASS_DEVICE
520 Say Y here if you want to enable support for TPO TD028TTEC1 480x640
521 2.8" panel (found on the OpenMoko Neo FreeRunner and Neo 1973).
523 config DRM_PANEL_TPO_TD043MTEA1
524 tristate "Toppoly (TPO) TD043MTEA1 panel driver"
525 depends on GPIOLIB && OF && REGULATOR && SPI
527 Say Y here if you want to enable support for TPO TD043MTEA1 800x480
528 4.3" panel (found on the OMAP3 Pandora board).
530 config DRM_PANEL_TPO_TPG110
531 tristate "TPO TPG 800x400 panel"
532 depends on OF && SPI && GPIOLIB
533 depends on BACKLIGHT_CLASS_DEVICE
535 Say Y here if you want to enable support for TPO TPG110
536 400CH LTPS TFT LCD Single Chip Digital Driver for up to
539 config DRM_PANEL_TRULY_NT35597_WQXGA
540 tristate "Truly WQXGA"
542 depends on DRM_MIPI_DSI
544 Say Y here if you want to enable support for Truly NT35597 WQXGA Dual DSI
547 config DRM_PANEL_VISIONOX_RM69299
548 tristate "Visionox RM69299"
550 depends on DRM_MIPI_DSI
552 Say Y here if you want to enable support for Visionox
553 RM69299 DSI Video Mode panel.
555 config DRM_PANEL_XINPENG_XPP055C272
556 tristate "Xinpeng XPP055C272 panel driver"
558 depends on DRM_MIPI_DSI
559 depends on BACKLIGHT_CLASS_DEVICE
561 Say Y here if you want to enable support for the Xinpeng
562 XPP055C272 controller for 720x1280 LCD panels with MIPI/RGB/SPI